sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

309Latest Thickness meter Tenders List

Latest Thickness meter Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Thickness meter tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Thickness meter tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Thickness meter Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Thickness meter tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Thickness meter Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Thickness meter Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Thickness meter Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Thickness meter tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Thickness meter Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Thickness meter sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Thickness meter tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Thickness meter tenders.

Is EMD mandatory for all Thickness meter tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Thickness meter work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Thickness meter tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Thickness meter Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17780856
Location : vaniyambadi , tamil nadu
Source : GEM Tenders
NEW TENDER
tender for 50x50x3.2mm thick - 6meter long square tube , aluminium sheet 4feet x 8feet x 3 mm thick or 1.2m x 2.4m x 3mm thick , aluminum unequal l angles half inch x 1 inch x 3 mm thickness - 6 meter long for general purpose , welding rod size 300mm x 3.15mm diameter , 25x25x2.8mm or 3mm thick - 6meter long, fabrication of frames for vbo outreach poster materials, ms square tube technical specification - ms square tube 50x50x3.2 mm material- mild steel - is 2062 grade a or b or equivalent is 4923 1997- hollow steel sections for structural use - specification mtd 19- steel tubes outer dimension- 50 mm x 50 mm wall thickness- 3.2 mm, aluminium sheet technical specification - aluminium sheet 4ft x 8ft x 3 mm is 737 -2008- wrought aluminium and aluminium alloy sheet and strip for general engineering purposes material- aluminium alloy grade- aa 1100 or 1200 or 5052 or 6061 - as specified, size- 4 feet x 8 feet or 1220 mm x 2440 mm, thickness- 3 mm, manufacturing process- hot rolled or cold rolled, mill finished surface finish- mill finish or anodized or powder coated as required, density- 2.70 grams per cubic centimeter weight- approx. 24.5 kg per sheet for 3 mm thick, aluminium un-equal l angle technical specification - aluminium unequal l angle half inch x 1 inch x 3 mm thick, material- aluminium alloy aa 6061-t6 or 6063-t6 or 1100 - as specified is 3909 1986, aluminium unequal leg angles ced 7- structural engineering and structural sections, section type- unequal l angle leg sizes- half inch x 1 inch or 12.7 mm x 25.4 mm thickness- 3 mm length- standard 3 m or 6 m as required, manufacturing process- extruded aluminium section surface finish- mill finish or anodized or powder coated as specified, density- 2.70 grams per cubic centimeter, welding rod size 3.15x300mm type- mild steel shielded metal arc welding smaw, electrode size- 3.15 mm x 300 mm classification- e6013 or equivalent standard- is 814 or aws a5.1 application- suitable for general-purpose welding of mild steel structures and fabrication works., ms square tube size- 25 mm x 25 mm x 2.8 mm thick ms square hollow section - shs, material- mild steel ms type- square hollow section shs standard- is 4923 or is 1161 or equivalent finish- black or plain, free from rust, cracks, and surface defects application- suitable for fabrication and structural works.
Agency / Dept :
indian institute of astrophysics IIA
Due Date :
Nov 05, 2026 (21 days left)
Tender Value :
3.03L
View Documents
T18 Ref No : 17785016
Location : kannur , kerala
Source : GEM Tenders
NEW TENDER
tender for ms angle , gp square pipe , gp sheet , teflon or nylon wheel , ms rod, metals, ms angle 2 inch , 6mm thick (6 meter length), ms angle 3/4 inch, 6mm thick (6 meter length), gp square pipe 1 inch , 2mm thick (6 meter length), gp sheet 8 x 4 feet, 2 mm thick, teflo or nylon wheel (od 40 mm, id 10 mm, thickness 20mm), polished ms rod 10mm thick (6 meter length)
Agency / Dept :
ai airport services limited
Due Date :
Oct 26, 2026 (11 days left)
Tender Value :
2.5L
View Documents
T18 Ref No : 17787076
Location : tirupati , andhra pradesh
NEW TENDER
tender for procurement of r.s. joists (galvanized) of size 150x150mm (9.1 meters) length each and thickness 12mm as per is:2062 grade a. hot dip galvanizing confirming to is2629:1985, procurement of r.s joists(galvanized) 150x150mm
Agency / Dept :
southern power distribution company of andhra pradesh ltd APSPDC
Due Date :
Oct 28, 2026 (13 days left)
Tender Value :
32.69L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17785776
Location : bhadrak , odisha
NEW TENDER
tender for requirement for premises on lease and rental basis - invites proposals/offers in two bid system from owners/builders/developers/registered societies having clear and marketable titles over ready to possession built up property, with sufficient parking (8-10 four wheelers and 2-5 two wheelers) and other amenities viz. 24x7 electricity, water supply etc., for acquiring premises for shifting of existing branches on lease basis in the bhadrak branch location in having required carpet area 1500-1950 sqft premises should preferably be on main road. the parking with proper space shall be preferred. further, the parking space should be situated as near as possible to the offered premises, without any additional cost to staff/customers. three phase electricity and un-interrupted water supply facilities should be available for the offered premises. premises should have proper drainage connection/sewage system and washroom for ladies & gents separately. vitrified flooring tiles (as per bank’s specification) required for offered premises at cost of the proposed landlord. collapsible grill gate for main entrance with rolling shutter to be provided by landlord at their own cost for proposed branch and adjacent atm/e-lobby premises, if any. air conditioners to be provided with iron grills and windowpanes by landlord at their own cost. landlord to provide space at rooftop or any other space in the same building, if rooftop is not available, for installation of vsat/alternate connectivity tower/solar panels etc. without any extra charge. landlord to provide ramp for pwd (persons with disability) at offered premises. landlord to provide space for display of the bank’s signage/electronic board at the prominent place of the offered premises, without any additional cost. landlord to provide sufficient provision for installing air conditioner and generator set by the bank at the offered premises. any alterations required for such installations shall be borne by the landlord. separate electric meter in bank’s name with three phase connection (as per bank’s requirement) for offered premises to be provided by landlord. strong room to be constructed by landlord as per bank’s requirement at their own cost as per bank’s norms/ specification. the strong room size 15x15 ft or 20x10 ft (all walls and roof of 12” thickness and 12mm iron bars as enforced) will be constructed strictly as per the bank’s specifications and size. strong room door, grill gate and ventilators are to be supplied by the bank. permission for commercial use of the property to be submitted by landlord. legal opinion should be submitted to ascertain that the owner has clear and marketable title over the offered premises.
Agency / Dept :
bank of baroda BOB
Due Date :
Oct 27, 2026 (12 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17785784
Location : balasore , odisha
NEW TENDER
tender for requirement for premises on lease and rental basis - invites proposals/offers in two bid system from owners/builders/developers/registered societies having clear and marketable titles over ready to possession built up property, with sufficient parking (8-10 four wheelers and 2-5 two wheelers) and other amenities viz. 24x7 electricity, water supply etc., for acquiring premises for shifting of existing branches on lease basis in baradiha balasore branch location in having required carpet area 1000 1100 sqft branch with atm premises should preferably be on main road. the parking with proper space shall be preferred. further, the parking space should be situated as near as possible to the offered premises, without any additional cost to staff/customers. three phase electricity and un-interrupted water supply facilities should be available for the offered premises. premises should have proper drainage connection/sewage system and washroom for ladies & gents separately. vitrified flooring tiles (as per bank’s specification) required for offered premises at cost of the proposed landlord.collapsible grill gate for main entrance with rolling shutter to be provided by landlord at their own cost for proposed branch and adjacent atm/e-lobby premises, if any. air conditioners to be provided with iron grills and windowpanes by landlord at their own cost.landlord to provide space at rooftop or any other space in the same building, if rooftop is not available, for installation of vsat/alternate connectivity tower/solar panels etc. without any extra charge.landlord to provide ramp for pwd (persons with disability) at offered premises. landlord to provide space for display of the bank’s signage/electronic board at the prominent place of the offered premises, without any additional cost.landlord to provide sufficient provision for installing air conditioner and generator set by the bank at the offered premises. any alterations required for such installations shall be borne by the landlord. separate electric meter in bank’s name with three phase connection (as per bank’s requirement) for offered premises to be provided by landlord. strong room to be constructed by landlord as per bank’s requirement at their own cost as per bank’s norms/ specification. the strong room size 15x15 ft or 20x10 ft (all walls and roof of 12” thickness and 12mm iron bars as enforced) will be constructed strictly as per the bank’s specifications and size. strong room door, grill gate and ventilators are to be supplied by the bank. permission for commercial use of the property to be submitted by landlord. legal opinion should be submitted to ascertain that the owner has clear and marketable title over the offered premises
Agency / Dept :
bank of baroda BOB
Due Date :
Oct 22, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17789794
Location : kapurthala , punjab
NEW TENDER
tender for ferritic steel sheet 10x1250x3000mm, ferritic steel sheet 10x1250x3000mm., as per drawing: rdso spec. no. c-k201, g rade x2crni12 (409m), heat treatment condition 2d as per table-5., packing instruction: stai nless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic steel) coil s. the coil shall be protected in reasonably good condition to withstand normal hand ling hazard during transit with the following provision as the barest minimum: i) coil should be wrapped with a layer of water proof paper through out whole length. ii) coi l should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil sho uld be wrapped with gi sheet. iv) side of the coil should be covered with card board sh eet. v) after this whole coil should be wrapped with biodegradeable plastic sheet of s uitable thickness. vi) the inner edge of the coil should be protected by gi ring followe d by another iron ring. vii) outer edge of the coil should be wrapped with gi ring. viii) c oil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. ix) whole coil should be mou nted on wooden blocks for easy lifting/stacking. x) the sheets in coil form for thickne ss 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 1000-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 to nnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sheets/plates s hall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate shall be se prated with a layer of water proof paper, after this the whole bundle should be wrapp ed with double layer of water proof paper and a biodegradeable plastic sheet of suita ble thickness. a metal protection in edges should also be provided. ii) all bundles shal l have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every addi tional meter. the bundles shall also be provided with skid (wooden packing under neat h) to facilitate handling. mechanical damange & corrosion during transit if any shall b e at the cost of supplier. - warranty period: 30 months after the date of delivery -quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs
Agency / Dept :
rail coach factory RCF
Due Date :
Oct 21, 2026 (6 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17681311
Location : bangalore , karnataka
Source : GEM Tenders
LIVE TENDER
tender for 1 inch nominal bore galvanized iron pipe, c-class, 4 mm thickness, 6 meters long as per is 1239 , 2 inch nominal bore galvanized iron pipe, c-class, 4.5 mm thickness, 6 meters long as per is 1239
Agency / Dept :
directorate of purchase and stores DPS
Due Date :
Nov 02, 2026 (18 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17175904
Location : ghaziabad , uttar pradesh
LIVE TENDER
tender for rubber sheet size: 2 meter x 1 meter length x 20 mm thickness, rubber sheet size: 2 meter x 1 meter length x 20 mm thickness, shore hardness 70+/-5% s pec no irs-r-57 - warranty period: 30 months after the date of delivery
Agency / Dept :
northern railway NR
Due Date :
Nov 03, 2026 (19 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17624911
Location : kozhikode , kerala
LIVE TENDER
tender for supply, installation, and commissioning of 1 no. 10-meter length and 1-meter width of 8mm belt thickness with 3 ply conveyor belt operated by 1.5 hp geared 3 phase motor with suitable stands, supports and pulleys
Agency / Dept :
directorate of urban affairs
Due Date :
Oct 26, 2026 (11 days left)
Tender Value :
4.1L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17668145
Location : ludhiana , punjab
LIVE TENDER
tender for web sling, double ply polyster high strenth low stretch webbing sling (5 tonne capacity) l ength 3 meter thickness - 6 mm width 125 mm - warranty period: 30 months after the date of delive ry
Agency / Dept :
northern railway NR
Due Date :
Oct 26, 2026 (11 days left)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Thickness Meter. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Thickness Meter sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Thickness Meter Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Thickness Meter, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Thickness Meter Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Thickness Meter Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Thickness Meter.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Thickness Meter depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Thickness Meter Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Thickness Meter bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Thickness Meter. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Thickness Meter, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Thickness Meter, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Thickness Meter?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Thickness Meter tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Thickness Meter?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Thickness Meter, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Thickness Meter is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All