sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

4Latest Numbered sealing lead Tenders List

Latest Numbered sealing lead Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Numbered sealing lead tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Numbered sealing lead tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Numbered sealing lead Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Numbered sealing lead tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Numbered sealing lead Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Numbered sealing lead Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Numbered sealing lead Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Numbered sealing lead tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Numbered sealing lead Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Numbered sealing lead sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Numbered sealing lead tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Numbered sealing lead tenders.

Is EMD mandatory for all Numbered sealing lead tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Numbered sealing lead work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Numbered sealing lead tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Numbered sealing lead Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 15633500
Location : raghurajnagar , madhya pradesh
Source : GEM Tenders
corrigendum tender for raw material white board marker , cleaning liquid 50ml , photo copy paper a4 , rj 45 connector , mouse usb product , keyboard usb product , cat 6 cable 305meter , stapler 10no small , remote battery aaa , battery clock aa , cd , dvd , usb- hub bus , vga cable 1 to 2 , curtains , m.s.flat 50x12mm , m.s.flat 100x10mm , m.s.flat 50x8mm , m.s. electrode 2.5mm , m.s sheet 3 x 8 x 2.5mm , m.s sheet 4 x 8 x 3mm , welding machine output copper leads 35mm , pvc gang box 4x8 modular , pvc gang box 4x10 modular , multistandard copper wire 4mm , bar magnet , carbon resitor 01 k , diode 1n 4007 , mcb 63amp tpn with box , steel screw 15mm 100nos , pvc rawal plug 3.5mm , wooden screw 75mm 100nos , pvc cable clip 6mm , pvc cable clip 10mm , pvc cable clip 20mm , 4 core 2.5mm armoured cable , pvc casing caping 1 inch 6ft length , sand paper zero number , led bulb 18w , solar torch , seek jadhu , table cloth size 5x3 , kachra bag , register 2 quire , register 4 quire , chalk white , duster , stepler 24x6 big , marker ink 15 ml , bill register , batten holder 05 amp , angle holder 05 amp , pendent holder 05 amp , pvc aluminium wire 2.5 mm single strand , kit - kat fuse 100a , winding wire copper 32 swg , winding wire copper 35 swg , winding wire copper 36 swg , cotton winding tape , winding sleev umpire 01 no , winding sleev umpire 02 no , winding sleev umpire 03 no , winding sleev umpire 04 no , winding sleev umpire 05 no , sand paper 00 to 01 no , winding paper millinex paper , lock 55mm , coolent , gardening pipe 1inch , saddle patti , metal mcb channel patti , pvc clip 6mm , pvc flexible coper wire 4mm , pvc flexible coper wire 1.5mm , screw 4inch , soldering iron 65watt , upvc pipe 3x4inch , upvc elbow 3x4inch , upvc tee 3x4inch , upvc solvent 200grm , taflon tape , pvc clamp pipe 3x4inch , upvc union 3x4inch , upvc socket adapter 3x4inch , upvc reducing adapter 1inch to 3x4inch , upvc brass elbow 3x4inch to 1x2inch , upvc ball valve 3x4inch , upvc tank adapter 3x4inch , steel tap 1x2inch , water tank 2000lit 6 layer , water tank 1000lit 6layer , upvc pipe 1inch , upvc elbow 1inch , upvc tee 1inch , upvc socket adapter 1inch , upvc union 1inch , pvc clamp pipe 1inch , upvc tank adapter 1inch , upvc ball valve 1inch , white board 4x6 , casing patti 2inch , big bucket , wooden beat 3x4inch half round , nails 1inch , ms round bar 30mm , ms round bar 40mm , ms round bar 45mm , ms round bar 50mm , ms round bar 60mm , ms round bar 65mm , mobile oil 40no. , cutting oil , power saw blade 1inxh x 14inch , hand hacksaw blade 1x2x12inch , emery paper 80no. , emery paper 100no. , wire bursh 4inch , chalk clolour , grease , file card , engine oil , service cable 3 core 4mm flat , weight machine 500kg. platform size 2x2 , ladder 20ft foldable type , router 4g lte wireless dongle , switch 8 port 1000mbps gigabit, whiteboard markers black, blue, red and green 4.43 mm bullet tip non-toxic smooth writing easy wipe, liquid cleaning kit for laptop for laptops computers, gamingm, mobiles, copier paper a4 size 70 gsm 500 sheets white paper, 1 ream for laserjet inkjet printer fast drying both side print eco friendly color, rj45 connector module plugs, comfort wired usb mouse 3 button 1000 dpi optical sensor plug and play for windows mac black, wired usb keyboard plug play 105 button mouse 1000 dpi high precision advanced optical sensor, colour gray connector gender male to male item weight 10570 grams item length 305meter, staples combo standard stapler with quick loading mechanism sturdy durable for long time use color may vary pack of 1, aaa battery duracell devices clock toy remote, aa battery duracell devices clock toy remote, a compact disc cd is a digital optical disc data storage, a compact disc dvd is a digital optical disc data storage, ultra slim multiport type c hub to 1xusb 3.0 and 3xusb 2.0 ports, cable 1 male vga to 2 female vga splitter cable for laptop, television, personal computer, size 4x6 silky cloth, ms flat rectangular ms flat, for industrial 50x12mm, ms flat rectangular ms flat, for industrial 100x10mm, ms flat rectangular ms flat, for industrial 50x8mm, welding rod e6013 2.5 x 350mm (mse011) isi grade mild steel electrode rutile coated arc welding rods for ac/dc easy strike, smooth bead, low spatter general fabrication and repair, ms sheet 2.5 mm rectangular mild sheet for industrial, ms sheet 3 mm rectangular mild sheet for industrial, isi welding cable 35 sq.mm flexible isi certified copper welding cable for workshop and fabrication use, modular surface gang box, white 4x8, modular surface gang box, white 4x10, pvc copper wire 4mm pro fr electrical wire, 90 meter fire resistant single core pvc insulated pure copper wire, anti rodent anti termite flexible wire for connections black, pvc copper wire 4mm pro fr electrical wire, 90 meter fire resistant single core pvc insulated pure copper wire, anti rodent anti termite flexible wire for connections red, enhancing efficiency and precision in manufacturing processes 4 inch, tolerance 1k mr ohm mf through hole resistors axial lead, diode in4007 passive, two terminal electrical components that limit or regulate the flow of electric current in a circuit, mcb single pole 63amp triple pole mcb with box isi marked, screw 15mm steel screw paster boards solid stainless, rawl plug heavy duty plastic rawl plugs durable expansion anchors for plasterboard, masonry, brick and concrete wall fixings for screws, screw 75mm fixing wood, plywood, paster boards solid stainless, pvc white cable clip 6mm, pvc cable clip 10mm, pvc cable clip 20mm, 4 core 2.5mm armoured cable lt power cable insulation material xlpe conductor material aluminum number of cores 4 core application power cable voltage 1100 v current rating 34 to 418 amp, pvc casing n caping, for electric wire installation 3m, sanding paper emery paper sand paper, led bulb 18w electric high glo led bulb 18w, b22d cap, 6500k, solar torch electric high glo led bulb 18w, b22d cap, 6500k, jhadu seek jhadu plastic wet and dry brush (white), machine washable rectangle tablecover for office table, leak proof and tear resistant trash bags for kitchen home and commercial use dustbin bags for dry and wet waste with free check duster cloth -black, register 2 quire, pages c ruled single line register for office record keeping, register 4 quire, pages c ruled single line register for office record keeping, chalk white a soft, porous, sedimentary carbonate rock primarily made of calcium carbonate, wooden duster for white boards, glass boards and chalk boards, staples combo standard stapler with quick loading mechanism sturdy durable for long time use color may vary, white board marker ink - 15 ml suitable for white board surface school stationery easily refill bold color smudge proof quick drying, bill register 70 gsm paper with hard binding cover for long durability, batten type, white, isi certified, ideal for ceiling/wall use with standard, angle lamp holder fancy type 240v white, pendant bulb holder for wall, b22 batten lamp holder for led/electric bulb for home (white), aluminium wire electric cable heavy duty 2.5mm 2 core aluminium cable for electrical fittings, 100a 415 volt ac porcelain fuse units (kitkat fuse), enameled copper wire - 32 gauge (0.27 mm diameter) - 99.9% pure copper wire - winding wire, enameled copper wire - 35 gauge (0.27 mm diameter) - 99.9% pure copper wire - winding wire, enameled copper wire - 36 gauge (0.27 mm diameter) - 99.9% pure copper wire - winding wire, cotton tape for winding insulation and multipurpose use, fiberglass insulation sleeve 1mm class h 180degree c heat resistant electrical insulation tube braided glass fiber sleeve for motor winding transformer and wire protection, fiberglass insulation sleeve 2mm class h 180degree c heat resistant electrical insulation tube braided glass fiber sleeve for motor winding transformer and wire protection, fiberglass insulation sleeve 3mm class h 180degree c heat resistant electrical insulation tube braided glass fiber sleeve for motor winding transformer and wire protection, fiberglass insulation sleeve 4mm class h 180degree c heat resistant electrical insulation tube braided glass fiber sleeve for motor winding transformer and wire protection, fiberglass insulation sleeve 5mm class h 180degree c heat resistant electrical insulation tube braided glass fiber sleeve for motor winding transformer and wire protection, sandpaper, 9 x 11 inches, silicon carbide, ultra fine grit 60, foam backed, compatible with sanding block, suitable for metal, wood, plastic, insulation paper sheet class f 155degree c electrical insulation paper flame resistant high dielectric aramid sheet for motor and transformer, lock 55mm combinations steel body hardened shackle 8 brass levers made in india padlock 3 silver keys, hybrid tech antifreeze coolant for bikes ready to use radiator fluid, prevents overheating corrosion, long-lasting engine protection, gardening pipe 1inch heavy duty 3 layered braided pipe 30 meter long water hose pipe pvc braided pipe green garden outdoors pipes with hose connector, plastic saddle clamp 25mm, mounting rail 35mm x 7.5mm slotted galvanized steel channel for electrical panels, terminal blocks, and mcb mounting, pvc flexible coper wire 4 sqmm 90 meter copper wire hrfr heat resistant flame retardant lead-free cable low smoke halogen-free wire for home and industrial electrical wiring, pvc flexible coper wire 1.5mm electrical wire, 90 meter fire resistant single core pvc insulated pure copper wire, anti rodent anti termite flexible wire for connections (black, ms screw 6 x 100 mm (4 inch), heavy-duty 65 watts soldering iron with pvc wire and copper tip, upvc water pipe of size 3x4inch, upvc elbow 3x4inch fittings elbow 90 degree 3inch white, plain upvc tee for plumbing pipe 3x4 inch, pvc heavy body solvent for pvc larger dia pipes and fittings, plumbing gas and thread sealing ptfe leak-proof, multi-purpose sealant tape, pvc u shaped pipe clamps with flat nail ivory wire and tube holder durable pipe clip, upvc union pipe fitting, 1.9 cm 3x4 inch, white, upvc reducing socket 3x4 inch to 1x2 inch white, upvc brass elbow for pipe fitting 3x4 x 1x2 inch, upvc compact ball valve 3x4inch 25mm, upvc socket tank connector 3x4inch, stainless steel long body taps for bathroom and kitchen taps with chrome finish and quarter turn fitting, water tank 2000 lit six layer water tank 2000 liter capacity blow mould tanks food grade antibacterial, uv and heat resistant tank hdpe material white color, water tank 1000 lit six layer water tank 1000 liter capacity blow mould tanks food grade antibacterial, uv and heat resistant tank hdpe material white color, upvc water pipe 1 inch, upvc elbow 1inch, upvc tee 1inch, upvc socket adapter 1inch, upvc union 1inch, pvc clamp pipe 1inch, upvc tank adapter 1inch, upvc ball valve 1inch, whiteboard drywipe magnetic with pen tray and aluminium trim, 4 ft x 6ft, cassing patti 2inch designed for surface-mounting electrical wires, big bucket industries unbreakable strong plastic bathroom bucket 12 ltr, half round wooden moulding beat patti for furniture rack side fitting, 1inch steel concrete nails, ms round bar 30 mm black mild steel round bar, ms round bar 40 mm black mild steel round bar, ms round bar 45 mm black mild steel round bar, ms round bar 50 mm black mild steel round bar, ms round bar 60 mm black mild steel round bar, ms round bar 65 mm black mild steel round bar, mobile oil 40no. engine oil for diesel engine, cutting oil water soluble cutting oil, power hexa blade (14inchx1inchx0.050inch) hss bimetal power hacksaw blade, hand hexa blade 1x2inchx1x2inchx0.050inch hss, emery paper 80no. coarse brown sandpaper for wood, metal, walls and diy finishing medium size, emery material, paper backing, emery paper 100no. coarse brown sandpaper for wood, metal, walls and diy finishing medium size, emery material, paper backing, steel wire brush with plastic handle, 5 rows, color chalks limestone slate pencils chalk piece full, grease long lasting lubricant for cars, buses, trucks, 2 wheeler, 3 wheeler, agriculture and construction), abrasive file card with wooden handle, engine oil 20/40no. engine oil for diesel engine, service cable 3 core 4mm flat, electronic platform weighing scale 600x600mm mild steel 500kg capacity, 50g accuracy oiml r76 compliant, iso certified digital weight machine for shop, warehouse, industrial use, aluminum wall support extension ladder, router 4g lte wireless dongle, 1000mbps full duplex 8 port gigabit switch hub lan gigabit ethernet desktop network switches black
Agency / Dept :
directorate general of training
Due Date :
Jun 16, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16191152
Location : raipur , chhattisgarh
Source : GEM Tenders
tender for watt 230 volt iron , i motor pump set 1 hp 1 phase 240 v , cabinet dryer electrical , pipe bending machine hydraulic type 12mm to 30mm , industrial sewing machine , fuel injection pump ve pump distributor fuel rotary pump dpc , phase sequence indicator 3 phase 415 v , pipe threading die with handle ratchet type die head of 12 34 and 1 , tachometer digital photo sensor type 10000 rpm , screw driver insulated 6mm 150 mm diamond head , punch centre 10 mm 150 mm , micrometer inside with extension rods accuracy 001 mm with extension rods up to 150 mm , steel measuring tape 20 mts , hacksaw frame fixed type 300 mm , dial gauge type 1 gr a complete with clamping devices and with , h washing machine semi automatic 5 kg , safety harness , auto darkening welding helmet , inverter with battery 1kva , depth micrometer 025mm accuracy 001mm , motorised bench grinder 1 hp 3 phase 440vdia150 mm , battery charger 0 6 9 12 24 48v 30amp , air ratchet with standard accessories , safety belt standard quality , drilling machinebenchtodrill up to 12mm dia along with accessories , electrical test bench , cutting knives , pocket steel tape 6 long , measuring tape 30m , measuring steel tape 15m , pliers round nose 15 cm , spoons wooden ladle , face shield , moisture box aluminium 100gm capacity , cleaning tray 45 30 cm , spanner t flocks for screwing up and upscrewing inaccessible , wheel barrow , spade , pocker , hacksaw frame fixed 150 mm , piston ring compressor , electric testing screw driver , connecting screw driver 100 mm , rotary switch 16 a440v , ph meter rod , lead light , chisels cross cut 200 mm 6mm , tweezers 100 mm , induction cooktop with following feature , glass rod , bradawl , circlip pliers expanding 15cm and 20cm , number punch 6 mm , desiccator , pipe cutting tool up to 5cm dia , chamois , electric iron automatic 750 w 240 v , belt sander narrow surface , trowelbrick 10 25cm long , pipe cutter wheel type 6 mm to 25 mm , digital vernier caliper universal type 0 150 mm lc 005 mm , heat sealing machine handpedal operated , feeler gauge 20 blades metric , screw pitch gauge metric 025 to 6 mm , beaker 50 100 250 ml 500 ml , pliers side cutting 15 cm , sleeve drill morse 0 1 1 2 2 3 3 4 4 5 , hydrometers of different ranges 030 3060 6090 brix , grease gun 05 ltr capacity , portable sanding machine 600w , water purifier ro and uv technologies , ph meter digital , hand rubber gloves tested for 5000 v , earth clamp , portable electric drill machine 15 mm drill bit capacity , measuring cylinder 100mi250ml 200 ml 500ml , pliers round nose insulated 100 mm , hammer extractor type250 grams , pipe flaring tool , thermostat , particle masks , soldering iron changeable bits 15w , spanner adjustable drop forged ss 150 mm , professional air blower power consumption 820 w , plier side cutting 200mm , washing machine automatic , microwave oven , pliers flat nose insulated 200 mm , utility knife , e ac ceiling fan and ac table fan 68 watt 230 v each , electric mixer , lugs for cable , pully puller with 3 legs 300mm , rheostat sliding type 0 25 ohm 2 amp , temperature gauge range 0 to 150 c , rheostat sliding type 0 1 ohm 10amp , conical flask 50 100 250ml 500ml , shredder for slicing of fruit and vegetable capacity 5kghrs , torque wrenches 535 nm , chisel cold round nose 9 mm 100 mm , weighing balance digital , electric soldering iron 35 w , rheostat sliding type 0 10 ohm 5 amp , impact wrench 1 to 2 inch drive , plier flat nose 150 mm , digital vernier caliper 0 150mm least count, partial boq 146, as per specification
Agency / Dept :
department of technical education DTE
Due Date :
Jul 11, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15734524
Location : raipur , chhattisgarh
Source : GEM Tenders
tender for watt 230 volt iron , i motor pump set 1 hp 1 phase 240 v , cabinet dryer electrical , pipe bending machine hydraulic type 12mm to 30mm , industrial sewing machine , fuel injection pump ve pump distributor fuel rotary pump dpc , phase sequence indicator 3 phase 415 v , pipe threading die with handle ratchet type die head of 12 34 and 1 , tachometer digital photo sensor type 10000 rpm , screw driver insulated 6mm 150 mm diamond head , punch centre 10 mm 150 mm , micrometer inside with extension rods accuracy 001 mm with extension rods up to 150 mm , steel measuring tape 20 mts , hacksaw frame fixed type 300 mm , dial gauge type 1 gr a complete with clamping devices and with , h washing machine semi automatic 5 kg , safety harness , auto darkening welding helmet , inverter with battery 1kva , depth micrometer 025mm accuracy 001mm , motorised bench grinder 1 hp 3 phase 440vdia150 mm , battery charger 0 6 9 12 24 48v 30amp , air ratchet with standard accessories , safety belt standard quality , drilling machinebenchtodrill up to 12mm dia along with accessories , electrical test bench , cutting knives , pocket steel tape 6 long , measuring tape 30m , measuring steel tape 15m , pliers round nose 15 cm , spoons wooden ladle , face shield , moisture box aluminium 100gm capacity , cleaning tray 45 30 cm , spanner t flocks for screwing up and upscrewing inaccessible , wheel barrow , spade , pocker , hacksaw frame fixed 150 mm , piston ring compressor , electric testing screw driver , connecting screw driver 100 mm , rotary switch 16 a440v , ph meter rod , lead light , chisels cross cut 200 mm 6mm , tweezers 100 mm , induction cooktop with following feature , glass rod , bradawl , circlip pliers expanding 15cm and 20cm , number punch 6 mm , desiccator , pipe cutting tool up to 5cm dia , chamois , electric iron automatic 750 w 240 v , belt sander narrow surface , trowelbrick 10 25cm long , pipe cutter wheel type 6 mm to 25 mm , digital vernier caliper universal type 0 150 mm lc 005 mm , heat sealing machine handpedal operated , feeler gauge 20 blades metric , screw pitch gauge metric 025 to 6 mm , beaker 50 100 250 ml 500 ml , pliers side cutting 15 cm , sleeve drill morse 0 1 1 2 2 3 3 4 4 5 , hydrometers of different ranges 030 3060 6090 brix , grease gun 05 ltr capacity , portable sanding machine 600w , water purifier ro and uv technologies , ph meter digital , hand rubber gloves tested for 5000 v , earth clamp , portable electric drill machine 15 mm drill bit capacity , measuring cylinder 100mi250ml 200 ml 500ml , pliers round nose insulated 100 mm , hammer extractor type250 grams , pipe flaring tool , thermostat , particle masks , soldering iron changeable bits 15w , spanner adjustable drop forged ss 150 mm , professional air blower power consumption 820 w , plier side cutting 200mm , washing machine automatic , microwave oven , pliers flat nose insulated 200 mm , utility knife , e ac ceiling fan and ac table fan 68 watt 230 v each , electric mixer , lugs for cable , pully puller with 3 legs 300mm , rheostat sliding type 0 25 ohm 2 amp , temperature gauge range 0 to 150 c , rheostat sliding type 0 1 ohm 10amp , conical flask 50 100 250ml 500ml , shredder for slicing of fruit and vegetable capacity 5kghrs , torque wrenches 535 nm , chisel cold round nose 9 mm 100 mm , weighing balance digital , electric soldering iron 35 w , rheostat sliding type 0 10 ohm 5 amp , impact wrench 1 to 2 inch drive , plier flat nose 150 mm , digital vernier caliper 0 150mm least count, partial boq 146, as per specification
Agency / Dept :
department of technical education DTE
Due Date :
Jul 09, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16448737
Location : sikar , rajasthan
Source : GEM Tenders
corrigendum tender for capacity 20 to 160 mm , cylinder liner dry and wet liner press fit and slide fit , depth micrometer 0 to 25 mm , dial gauge type 1 gr a complete with clamping devices and with magnetic stand , different type of engine bearing model , different types of piston model , dividers with spring 150 mm , drift punch copper 150 mm , drill point angle gauge , drill twist 1.5 mm to 15 mm various sizes by 0.5 mm , electric soldering iron 60 watt 230 v , electric soldering iron 25 watts 230 v , electric testing screw driver , engineers stethoscope , feeler gauge 20 blades metric , file flat bastard 200 mm , file half round second cut 200 mm , file square second cut 200 mm , file square rough 300 mm , file triangular second cut 150 mm , files assorted sizes and types including safe edge file 20 nos , flat file second cut 250 mm , flat file bastard 350mm , fuel injection pump diesel in line , fuel injection pump dismantling tool kit universal vice , fuel injection pumps ve pump distributor fuel rotary pump dpc pumps along with special tools and accessories , glow plug tester , surface plate l 1600 w 1000 mm c i granite with stand and cover , grease gun , growler , hacksaw frame adjustable type 200 to 300 mm , hammer ball pein 750 gm , hammer chipping 250 gm , hammer copper 1 kg with handle , hammer mallet , hand operated crimping tool wire up to 4 mm , hand operated crimping tool wire up to 10 mm , hand shear universal 250 mm , hollow punch set of seven pieces 6 mm to 15 mm , injector cleaning unit technical , injector testing set hand tester , lifting jack screw type 3 ton capacity , lifting jack screw type 5 ton capacity , lifting jack screw type 20 ton capacity , magnifying glass 75 mm , marking out table l 90 w 60 h 90 cm , multi meter digital , oil pump gear type pump for lmv , oil pump rotor type pump for lmv , oil stone l 15 w 5 h 2.5 cm , oscilloscope 20 mhz , micrometer outside 50 to 75 mm , micrometer outside 75 to 100 mm , pipe flaring tool , piston ring compressor , pliers round nose 150 mm , portable electric drill machine , prick punch 150 mm , punch number 4 mm , rivet sets snap and dolly combined 3 mm 4 mm and 6 mm , scraper flat 250 mm , scraper half round 250 mm , scraper triangular 250 mm , scriber with scribing block universal , set of stock and dies metric , tinmans shear l 450 mm w 600 mm , sheet metal gauge , tinman s shear 300 mm , soldering copper hatchet type 500 gm , solid parallels in pairs different sizes in metric , spanner clyburn 150 mm , spanner t flocks for screwing up and up screwing inaccessible , spanner adjustable 150 mm , spark lighter , spark plug spanner l 14 mm w 18 mm size , steel rule 150 mm inch and metric , straight edge gauge 2 ft , straight edge gauge 4 ft , tachometer counting type , tandem master cylinder with booster working model , taps and dies complete sets b a , taps and dies bsw various type in inch , tap and dies set metric size 03 to 24 mm , taps and die set bsf various type in inch , taps and dies width worth fine , timing lighter new brand , torque wrenches 5 to 35 nm , torque wrenches 12 to 68 nm , torque wrenches 50 to 225 nm , tyre pressure gauge with holding nipple , universal puller , v block l 75 w 38 mm pair with clamps , valve lifter , valve spring compressor universal , vernier caliper 0 to 300 mm with least count 0 point 02 mm , water pump new brand , wire gauge metric , vices of 120 mm jaw , air conditioned crdi vehicle new brand lmv bs vi with abs and speed limiter , arbor press, mechanic diesel lab items, allen key set of 12 pieces with hex key sizes 2 to 14 mm made from forged steel alloy carbon steel, caliper inside 150mm spring made of carbon steel gauging point should be heat treated, centre punch 10mm dia x 100 mm round knurled body made of alloy steel gauging point should be heat treated, screw driver 250 x 9 mm flat tip size 8 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, properly heat treated., hammer ball pein, head weight 500 gm made from forged carbon steel, face heat treated. with wooden handle, hand file 200mm second cut, made of heat treated tool steel with wooden handle., philips screw driver 100 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip with neon tester., philips screw driver 150 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 200 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 250 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 300 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, pliers combination 200mm insulated with moulded sleeves of high voltage grade, made from drop forged alloy steel with side cutting facilities, properly heat treated., screw driver heavy duty 200mm x 9 mm flat tip size 9 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., screw driver heavy duty300mmx 9mm flat tip size 10 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., spanner d.e. 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanner ring 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanners socket with speed handle, t-bar, ratchet and universal up to 32 mm set of 28 pieces with box. made from forged carbon steel., steel rule 300 mm. metric, english both graduation made of stainless steel with conversion table engraved, as per drawing l 150 mm w 200 h 400, wire cutter & stripper 150 mm made of high carbon steel , wire stripping capacity up to 6mm, spanner adjustable 350 mm blade, made from alloy steel, workshop grade, 1 should be trigger operated blow gun with interchangeable nozzles with metal gun 2 fitted with brass air inlet ferrule 3 suitable for quick removal of chips, dust and particulate from any surface 4 operating pressure 80 to 150 psi 5 high pressure nozzle 6 safety nozzle adaptor 7 crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application 8 low pressure nozzle and supplied with manual, ammeter dc shunt type up to 300 amp the shunts are constructed from high grade managing, air ratchet with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box with manual, air impact wrench with 180 ft lb 244 nm max torque and 7100 rpm and a feather touch trigger two position forward power regulator and conveniently located forward reverse ring provide precise control with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box and manual will be provided. square drive half inch bolt size in the box 9 to 27 mm, angle plate size 200x100x200mm made from close grain c.i. workshop grade., anvil 50 kg. single horn type made from cast steel working face heat treated, face having hardie hole & punching hole, stand made from fabricated angle iron (50 x 50 x 6 mm) height 400 mm, alternator starter with minimum 2 hp ac motor digital auto electrical test bench checking for alternator and starter motor auto electrical test bench checking for alternator and starter motor mild steel frame work table top test bench 2 hp and 3 phase1440 rpm motor induction motor suitable for 50 hz 415 v ac supply with heavy duty transformer for starter testing with light run test variable frequency drive vfd overload capability 150 percentage of rated current 60 seconds built in pid simplify the establishment of a closed loop control system key lock and function selection communication port rs 485 4 point 3 inch colour hmi for indication for voltage and current 2 ch analogue input controlled via rs 485 bus utilizing modbus rtu protocol 1 channel dc current input with 75 mv input for shunt 1 channel dc voltage input 200vdc 1 construction of relay output 7a 230vac 2 leds for indicating the power status and signal trans receiving status capable to interface with pc attached with thermal printer communication interface rs485 rtu diode150 a 12 to 24 v 4 nos shunt 200a 75 mv transformer 12v 200 a 24 v 150 a 1 no transformer 0 to 240 v primary 12 to 0 to 12 v secondary 1 no mains supply 415 v ac 3 phase 50 hz ac power supply v belt heavy duty banana terminals on the front panel pulley groove for alternator checking heavy duty rugged vice for mounting alternator and starter operation manual should be provided, voltage 12v input volt 230v 50hz output volt 12 v dc capable for 5ah 35ah battery charged rotary swicth to select volt and amp ammeter display and main switch plus minus knob crocodile connector with wire 2 ft in length aligator clips high current charging upto 15 ampere circuit breaker for reverse battery auto cut off after charging, blow lamp capacity 1000ml body made from brass. with inclined burner type, should be used on vehicle belts where the manufacturer specifies the timing belt tension to be set at a specific location on the belt span between pulleys should have clear incremental markings with knurled knob for accurate measurement. should speed up timing belt installation .measurement range 0 to 80 kg 750 newton supplied in a foam inlay box, power supply electrical electrical cable m 5 mtr working pressure bar 8 to 12 kg cm2 hose length m 10 mtr suction and discharge each motor rpm 2800 rpm flow rate l h 8 to 12 lpm phase 1 phase 3 hp 230 volt suitable for cold water spray gun standard number of pistons plungers 3 pressure gauge auto stop facility for power saving suitable guns for water and foam sprey water filter pressure regulating valve for increasing and decreasing output pressure the operating unit should be mounted on a ms structure trolley type starter switch caster wheel 2 nos water pipe inlet and out let, automatic double pawl braking system capacity range 1- 3 ton fully forged hooks are fitted safety latches shield bearing zinc plated hand chain as standard standard lift 3 meter effort required to lift 3 ton load- 30 kg. with tripod stand & standard accessories., chisel flat 100mm, made of forged steel. point heat treated., circlip plier internal 150 mm drop forge alloy steel heat treatment moulded sleeve . ., circlip plier external 150 mm.drop forge alloy steel heat treatment moulded sleeve ., circlip plier internal 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., circlip plier external 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., clamps c 100mm, made of forged steel., clamps c 150mm, made of forged steel., clamps c 200mm, made of forged steel., tray cleaning 450 into 300mm -gi sheet 18 g side handle both border wires, 1 quickconnect adapter push pressure scale 0 1000 psi 0 7000 2 kpareads pressure from 0 to 1000 psi 3 2 to 9 by 16 diameter gauge 4 thumb button air release should be supplied with adapters for suzuki hyundai gm ford isuzu mercedes toyota volkswagen and peugeot compatible for dry test with adptor standard accessories all above items should be placed secured in a blow molded plastic box or metal box, connecting rod alignment fixture height of fixture 450mm connecting rod 40 to 100mm connecting rod alignment fixture checking bent twist offset precision ground surfaceshould be supplied with following accessories bent and twist indicator bending bar with alignerdial indicator and the connecting rod fixture ms iron should be fitted over a base etc with all accessory, soldering iron copper bit weight 250gm hatchet type with handle, cylinder gauge, bore dial gauge with accessories 20-160 mm least count 0.01 mm self cantering with interchangeable mounted head complete., technical specification cylinder liners of following types dry liner for engine cylinder press fit type wet liner for engine cylinder with rubber o ring slide fit liner piston with ringstandard features, micrometer depth 0 to 25mm lc 0 point 01mm carbide tipped on measuring face made from alloy steel complete in box, dial gauge indicator l.c. 0.1 mm ran- ge 10mm dial graduation 0-50-0 balance plunger type dial & holder. magnetic base with on-off switch, fine tolerance setting arm, stem dia. as per dial indicator, complete set in dial gauge., the model will made out of different type of engine bearing suitable for engine 1 shell bearing for crankshaft with main journal and big end journal 2 thrust bearing for crankshaft 3 ball bearing for crank shaft 4 bush bearing for connecting rod 5 needle bearing for connecting rod 6 bush bearing for camshaft & rocker arm 7 shell bearing for overhead cam shaft 8 needle bearing for rocker arm 9 name mention of each bearing on board, the model will be made out of different type of piston model. 01set concave head dome head flat head solid skirt recessed head light weight model for easy shifting. piston will be mounted on a wooden board name mentioned of each type the piston.and constructional diagram details printed on to a colourful panel with details of applications the item will be supplied in a dust proof box & covered by the acrylic sheet., divider spring joint 150mm, made of alloy steel., drift punch copper 150mm made by copper, drill point angle gauge made by drop forged steel., twist drill straight shank high speed steel 1.5 to 15mm by 0.5mm set 10pcs. high carbon steel &heat treated., soldering iron 60 watt, 230 v.a.c. standard length of mains lead with 3 pin top, bit made from copper., soldering iron 25 watt, 230 v,.a.c. standard length of mains lead with 3 pin top, bit made from copper., neon tester 500 volt heavy duty insulated. handle made from transparent cellulose acetate with plated metal clip. blades made from selected steel chrome & insulated., engineer s stethoscope with standard accessories, feeler gauge set of 20 blades metric, different sizes, length of blades 100 mm, made from alloy steel., file flat 200mm bastard made of heat treated tool steel with wooden handle., file half round 20cm second cut, made of heat treated tool steel with wooden handle., file square 200mm second cut, made of heat treated tool steel with wooden handle., file, square 300mm rough, made of heat treated tool steel with wooden handle., file triangular 150mm second cut, made of heat treated tool steel with wooden handle., files assorted sizes and types including safe edge file (20 nos), made high carbon/high speed steel. size (150 mm)., file flat 250mm second cut, made of heat treated tool steel with wooden handle., file flat 350mm bastard, made of heat treated tool steel with wooden handle., fuel injection pump (diesel) inline complete pump assembly suitable for 4/6 cylinders diesel engine rsv mechanical or pneumatic governor type the item will be supplied on suitable plywood and collared with attractive colour. a dust proof wooden box & covered by the acrylic sheet., fuel injection pump dismantling tool kit 1. universal vice 2. pre stroke setting attachment with gauge, 3. pump couplings, 4. control setting gauge with attachment, 5 .tappet adjusting spanner (thin),6. ring wrench,7. tappet lifter, 8. mechanical finger (gripper), 9. adapter capsule box for fip, 10. thread puller for fly weight, 11. drift for bottom plug, 12. impact screw driver, 13. flower/trox allen key set, 14. attachment for setting angle of accelerate lever, 15. coupling for fip cam, coupling wrench, 16. round nut spanner different type, 17. ve pump holding attachment, 18. inline and rotary pump holding attachments,19. drift for installing and removing oil seal, 20. holder spanner, 21. spring locking plates, 22. governor weight remover., fuel injection pump in diesel type distributor fuel rotary pump with dpc complete pump assembly compatible for 4 cylinders diesel pump operated by handle and constructional diagram details printed on to a colourful panel with details of applications will be supplied with along with all tools and special tools and accessories for dismantling and assembling fuel injection pump special tools 1 extra long socket 2 mounting stand for ve pump distributor fuel rotary pump dpc pumps 3 injection pump special socket 4. coapling for ve pump distributor fuel rotary pump dpc pumps 5 testing jig 6two pin spnner 7 huk spanner 8.pump nozzle refting tool, power input 8point 5 to 15 volt max current 80 ampere, surface plate made of closed grain seasoned cast iron/ granite 1600 mmx 1000 mm grade 1, with calibration test certificate, complete with top cover, side handle. m.s. fabricated standard height stand with leveling screws ., grease gun pressure type 500 gm. capacity hand operated, manufactured from tin plate with steel pump with fixed spot., growler general & internal set suitable to test d.c. armature and ac motor starter rating supply ac. 250volt 50hz., hacksaw frame adjustable type 200-300mm with blade & handle., hammer ball pein head weight 750gm made from forged carbon steel, face heat treated. wooden handle fitted, hammer chipping 250gm with handle, one side chisel and other side pointed end type hard and tempered, steel handle about 250 mm long., hammer copper forged head weight 1000gm with fibre glass handle,, hammer mallet head dia.100 mm. made from wood with handle., hand operated crimping tool for crimping up to 4 mm, hand operated crimping tool for crimping up to 10 mm, hand shear universal( straight snip ) 250 mm, made from drop forge steel. cutting edge hard & tempered., punch hollow, hole dia 6 to 15 mm set of 7 pieces made from alloy steel, main unit power supply ac 220v plus minus 10 percent 50hz ultrasonic cleaner power 30 to 50w ultrasonic bath inner body material stainless steel simulated rpm range 10 to 9990 rpm step 10 rpm time range 1 to 9999 pulse width 0 point 5 to 25 ms step 0 point 1ms fuel tank capacity 2 to 4 ltr no of glass tube 4 nos with marking glass tube holder and manifold moc aluminium display type led suitable for all types of petrol injectors and gdi gasoline direct injection injectors achieve automatic cleaning and testing of injectors the machine should be capable to perform flowing test uniformity/spray ability test will be able to test the uniformity of injecting amount of each injector and to monitor the spraying status of each injector with the help of backlight leakage test will be able to test the sealing and dribbling conditions of injectors under system pressure injecting flow test will be able to check the injecting amount of the injector in 15 seconds of constant injection auto test will be able to test injectors by simulating different working conditions ultrasonic cleaning will be able to perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely, for nozzle sizes presser gauge 0 to 400 kgf cm2 standard accessories steel aluminium fuel container with filter manual hand operating lever handle with grip. along with split pin three way shut off valve with valve spindle. suitable fuel pipes for all injector, lifting jack screw type 3 ton capacity for vehicle 3048 kg road open height 13 inch closed 4 inch dia of screw 1 point 25 inch with bearing type lifting jack, lifting jack screw type 5ton capacity for vehicle 5048 kg road open height 13 closed 7 inch dia of screw 1 point 50 inch with bearing type lifting jack, lifting jack screw type 20 ton capacity road open height 14 inch closed 7 dia of screw 1 point 75 inch to 2 point 0 inch square threads with bearing type, magnifying glass 75mm with handle, marking table made from seasoned close grain c.i. 90cm x 60cm x 90cm. workshop grade with test certificate. with steel handle both side, levelling screws & cover. m.s. fabricated stand in standard size, digits 3 and half digit display lcd display with large digits for easy visibility voltage range ac up to 750v ac voltage range dc up to 1000v dc ac and dc current range up to 20a resistance measurement up to 200 mohm with capacitance frequency diode transistor test audible continuity test data hold facilities, 1. gear type pump for lmv this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine, 1. rotor type pump for lmv. this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine., stone oil 15 x 5 x 2.5 cm. one side rough & one side smooth., analog oscilloscope 20 mhz two channel 4 trace monochrome display 1 general portable rugged including features of component tester and in built frequency counter 2 bandwidth dc to 20 mhz 3d b 3 of channels two channels 4 deflection coefficient in calibrated steps from 5 mv to 5 v cm 5 rise time 17 point 5 ns 6 variable hold off for stable triggering 7 input impedance 1 mohm 25 pf 8 time base coefficients 18 calibrated steps 0 point 5microsec per cm to 0 point 2 sec cm with 5 magnifier to 100ns cm 9 trigger system automatic and normal level adjustable 10 source ch i ch ii alt line external 11 slope positive negative 12 coupling ac dc gnd 13 sensitivity 5 mm 14 trigger bandwidth 40 mhz 15 horizontal deflection dc 2 point 3 mhz 3db bandwidth 16 x to y mode phase shift 3 degree up to 60 khz 17 frequency counter range 20 hz to 30 mhz in built 18 computer interface usb 19 resolution 10 hz 10 khz 20 sensitivity 0 to 5v by div 21 attenuation 1 ratio 1 and 1 ratio 20 22 max input voltage 300 v rms cat ii 23 crt 140 mm rectangular with internal graticule and p31 phosphor 0 point 8 mm green colour plexiglass 24 calibrator operator 1 khz square wave 0 point2 vpp for probe compensation 25 z modulation ttl level 26 power supply 230 v plus minus 10 percent 50 hz ac supply component tester built in single touch, micrometer outside 50 to 75 mm l c 0 point 01 mm carbide tipped on anvil and spindle measuring face with spindle lock setting spanner and test piece 50 mm made of alloy steel complete in box with master, micrometer outside 75-100 mm, least count 0.01mm, carbide tipped on anvil &spindle measuring face, with spindle lock, setting spanner & test piece 75 mm, made of alloy steel complete in box with master., flaring tool set single type for tube 4 point 7 to 16 mm o d block and cone made of alloy steel and hard tempered nickel chrome plated able to flaring 1 by 2 inch 7 by 16 inch 1 by 4 inch 3 by 16 inch 3 by 8 inch and 5 by 8 inch o d, piston ring compressor 50 to 150 mm 2 1 by 2 inch wide spring bands equally distributes tension for easy compression for use on all passenger vehicles, pliers combination 200 mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, pliers nose 150mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, drill machine portable electrical 15 mm capacity a c single phase input full load 235 watt rpm 2800 and standard length supply cable and key, prick punch 150mm knurled body made from tool steel tip ground and heat treated, punch number 4 mm made from tool steel hardened set containing set of 9 piece 0 to 9 in suitable container, rivet sets snap and dolly combined 3 mm 4 mm 6 mm hand operated mabe drop forgd steel, scraper flat 250mm made from tool steel tip hardened and ground with wooden handle, scraper half round 20mm made from tool steel tip hardened and ground with wooden handle, scraper triangular 250mm made from tool steel tip hardened and ground with wooden handle, scriber with universal scribes block and accessories, dies set of stock and dies metric dies 3 4 5 6 8 10 12 14 16 and 18 set of 10 made from alloy tool steel dies circular split pattern type with suitable die stock with suitable dies handle dies hardened and tempered complete set in box, heavy duty cast iron body blade length600mm blade material d2 table size 450 mm into 600 mm back gauge attachment table 2t slot paddle spring operated, sheet metal gauge made from alloy steel steel graduation in both system british and metric, tinmans shear 300 mm made from drop forge steel cutting edge hard and tempered, soldering copper hatchet type 500 gms, solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated size 1 by 2 inch accuracy 0 point 0002 inch material made of high quality alloy steel precision ground and hardened product includes one pair of 1 inch into 6 into 1 by 2 into one pair of 1 to 1 by 2 inch into 6 into 1 by 2 inch one pair of 1 to 1 by 4 inch into 6 into 1 by 2 inch one pair of 1 to 3 by 4 inch into 6 into 1 by 2 inch application to be used in setting up work for drilling and milling, spanner clyburn 150mm. made from forged carbon steel. phosphate finish, spanner t flex for screwing up and unscrewing in inaccessible position and size 6 8 10 12 14 set of 5 pcs, spanner or wrench adjustable 150mm. standard pattern selected, made from forged steel heat treated, spark lighter friction type suitable for gas lighting, spark plug spanner size14 into 18 mm made from forged carbon steel, steel rule 150mm metric english both graduation made of stainless steel with conversion table engraved, straight edge 600 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, straight edge 1200 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, tachometer counting type display 5 digit lcd display accuracy plus minus 0 point 05 percent plus 1 digits rpm test range 2 to 99 999 rpm count range 1 to 99 999 counter resolution 0 point 1 rpm 2 to 999 point 9 rpm 1 rpm over 1000 rpm sampling time 0 point 5 sec over 120 rpm detecting distance 50 to 500 mm, this model which will give a complete idea of tandem master cylinder in vehicle and it s function the working model of tandem master cylinder assembly consisting of following minimum parts and practically demonstrable brake disc assembly one caliper assembly brake pad tandem master cylinder with vacuum booster vacuum pump brake hoses oil reservoir with oil with brake pedal features the model will be mounted on m s stand with good quality paint applications suitable sectioned to demonstrate the internal construction diagram details printed on to a colourful panel operating manual will be provided., taps and dies set b.a. 0 to 10 circular split pattern die & hand tap set of 3 piece made from alloy tool steel with suitable die stock and tap handle. taps and dies hardened & tempered. complete set in box, taps and dies b s w 1 by 4 5 by 16 3 by 8 inch 7 by 16 1 2 5 by 8 3 4 inch 7 by 8 1 inch set of 9 made from alloy tool steel dies circular split pattern type with suitable die stock hand tap set of 3 piece and tap handle taps and dies hardened and tempered complete set in box, tap and dies set metric size 03 to 24 mm 3 4 5 6 8 10 12 14 16 20 22 24 mm set of 12 made from alloy tool steel dies hand circular split pattern type with die stocks tap set having three piece taps with suitable tap handle and according to size taps and dies hardened and tempered complete set in box, taps and die set b s f by 4 5 by 16 3 by 8 inch 7 by 16 1 by 2 9 by 16 5 by 8 3 by 4 7 by 8 1 inch set of 10 made of alloy tool steel tap set of 3 piece circular split pattern die set tap wrenches and die stocks taps and dies hardened and tempered complete set in box, taps and dies width worth fine 1 by 8 inch 3 by 16 inch 3 by 8 inch 1 by 4 inch 5 by 16 inch 7 by 16 inch 1 by 2 inch 5 by 8 inch 3 by 4 inch 1 inch set of 10 made from alloy tool steel dies circular split pattern type with die stock hand tap set of 3 pieces with suitable tap handle. tap and dies hardened and tempered complete set in box, timing lighter with neon bulb for setting of all kind of petrol engine timing illumination angle approx 15 degree strobe tube high intensity xenon tube with cable used for checking ignition timing of petrol engine easily operate on 12v ignition systems 12 volt battery operated focused lens should provide light for high visibility of timing mark suitable for petrol carstwo wheelers handle design be more comfortable and easy to operate manufactured by standard company provided with suitable woodenplastic metal box, torque wrench 5 to 35 nm force, adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 12 to 68 nm force adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 50 to 225 nm force, adjustable by turning knurled handle barrel type rod form chrome plated. brake over type, tyre pressure gauge with holding nipple for measuring 0 to 160 lb by sq inch and 0 to 12kgf by sq cm of tyre pressure, universal puller for removing pulleys bearings, v block 75 into 38 mm pair with clamps v block pair with one clamps 75 into 38 into 50 mm by 75 into 50 into 50 mm made from close grain c i workshop grade, valve lifter valve spring for lifting & realizing of spring automatic ratchet lock c type reversible jaw adaptor for multi valve engines capacity 45 to 145mm throated clearance 250mm big window jaw adaptor for easy replacement of valve collects, valve spring compressor universal suitable for various cylinder head engine models, vernier calliper 300 mm length with metric and inch scale l c 0 point 02 mm four way quadric measurement type made from stainless chrome steel micro lapped hardened and tempered in box, automotive water pump of any multi cylinder water cooled engine for dismantling and assembling colored with attractive color. good finish the model will be fitted on suitable plywood sheet and constructional diagram details printed on to a colourful panel with details of applications, wire gauge made from alloy steel, gauge size 0 to 36 swg graduation in metric, bench vices 12cm jaw body made from close grain sg iron and serrated alloy steel jaw jaw heat treated spindle handle dia grater than equal 10 mm and closed on both end unbrakable materials screw materials en 24, engine type 3 cylinder inline common rail turbo diesel iron block air conditioned type displacement 1500 cc rear wheel drive water cooled engine fuel system common rail direct injection body two box five door wagon transmission type 5 speed manual suspension front independent with coil spring rear independent with coil spring steering type power assisted steering power window all four windows reverse gear sensors. anti theft device gprs inbuilt turning diameter 11 point 6 m ground clearance 180 mm wheel base 2680 mm fuel tank 60 litre s standard accessories owner s manual bs vi with abs and speed limiter, an arbor press is a small hand-operated press. it is typically used to perform smaller jobs such as staking riveting installing configuring and removing bearings and other press fit work removable machined steel anvil provides accurate work support in for slot positions automation grade manual material iron weight 30 to 50 kg usage application industrial capacity 2 ton, exhaust gas analyzer petrol arai approved to check construction of co2 o2 and hc and nox 1 construction of carbon monoxide range 0 to 9 point 999 percent resolution 0 point 01 percent 2 co2 carbon dioxide range 0 t
Agency / Dept :
department of technical education DTE
Due Date :
Jul 30, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Numbered Sealing Lead. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Numbered Sealing Lead sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Numbered Sealing Lead Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Numbered Sealing Lead, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Numbered Sealing Lead Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Numbered Sealing Lead Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Numbered Sealing Lead.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Numbered Sealing Lead depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Numbered Sealing Lead Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Numbered Sealing Lead bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Numbered Sealing Lead. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Numbered Sealing Lead, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Numbered Sealing Lead, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Numbered Sealing Lead?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Numbered Sealing Lead tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Numbered Sealing Lead?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Numbered Sealing Lead, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Numbered Sealing Lead is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All