Sales : +917069661818
Sign In
Register Now
Sample Tenders

Filters By:

T18 Ref No
Keyword
State
City
Agency
Tender ID
Due Date
Tender Source
Tender Type
Reset

7Results forLatest Fabricated hub Tenders List

▼

Latest Fabricated hub Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Fabricated hub tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Fabricated hub tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Fabricated hub Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Fabricated hub tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Fabricated hub Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Fabricated hub Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Fabricated hub Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Fabricated hub tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Fabricated hub Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Fabricated hub sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Fabricated hub tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Fabricated hub tenders.

Is EMD mandatory for all Fabricated hub tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Fabricated hub work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Fabricated hub tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Fabricated hub Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16225779
live Tender
Location : indore , madhya pradesh
Source : GEM Tenders
live Tender

tender for shoe comp brake rear , bush cushion rubber , pressure plate bearing kit , combi switch ms harness , master cyl repair kit minor , master cyl rep kit , repair kit major sleeve cylinder , assy clutch pressure plate 330 dia , 352 dia clutch disc assy 1 75 spline , repair kit for spring brack chamber , bush hub bottom , expansion valve, mc 100cc hero honda hf deluxe bs-iv 2025, truck 2.5 ton tata 4x4 713/32 2015, lpo 1510 1512tc/55 pre-fabricated bus 2006, lorry 5/7.5 ton ashok leyland stallion 4x4 mark-iii 2009, lpo 1512tc/55 pre fabricated bus 2005, tata winger ambulance 2014

Agency / Dept : indian army
Tender Value : 0
Due Date : Jul 23, 2026
View Documents
T18 Ref No : 15635927
Location : patiala , punjab
Source : GEM Tenders

tender for hub motor kit , lithium ion battery , motor controller , charger unit , dc-dc converter , battery box fabrication , heavy wiring kit and connectors , main fuse mcb , ignition switch , rear disk brake calipers , digital meter , tyre with nozzle fitment , bike wrapping vinyl, retrofiting of hero hf deluxe motorcycle into hybrid lectric stelth mobility vehicle, 2000w 17inch wheel, 60v 72v 45amp compatible, 45a sine wave controller, 60v 35amp lithium ion battery pack, 60v 72v, 45a sine wave controller, regenerative braking support, 60v 6 amp smart lithium, 60v/72v input to 12 output, aluminum fabricated battery enclosure with mounting brackets, high current copper cables, xt-90 connectors lug and sleeves, 60v/72v dc fuse or 50a-80a mcb protection unit, key type ignition switch with wiring harness, mechanical disk brake conversion kit, led multifunction speedometer with battery indicator, tube less tyre compatible, high quality vinyl wrap sheet

Agency / Dept : indian army
Tender Value : 0
Due Date : Jun 13, 2026
View Documents
T18 Ref No : 15840464
Location : tirupati , andhra pradesh
Source : GEM Tenders

tender for item 1 , item 2 , item 3 , item 4 , item 5, augmentation of building, augmentation of building 1, augmentation of building 2, augmentation of building 3, augmentation of building 4, augmentation of building 5 supplying and placing in position main table,eru & pedestal of the following specifications. the main table shall be of size 3600 width mm x 1080 mm depth x 750 mm height. top surface of the table shall made up of mdf (medium density fibre ) board duly finished with veneer and final coating of pu. the main desk should contain in smart case - space slides effortlessly in style.the mobile pedestal shall be of size 480 width mm x 640 depth mm x 600 height mm. mobile pedestal shall be coated of mdf (medium density fiber) with veneer coating and pu coating.the eru top shall be of mdf (medium density fiber) board duly finished with veneer and final pu coating. size of eru top 1900 width mm x 480 depth mm x 550(not from ground with castors).the main desk is provided eith the wire management system also there is perfect storage side unit . 1 2 supplying and placing in position back unit of the following specifications. the size of the back unit shall be 1000 mm width x 480 mm depth x 2035 mm height. the back unit shall be made up of mdf board duly finished with veneer & final finish by pu coating. the mobile unit can be bought in multiples.pu coating hardness 1.5h. 2 3 providing, supplying and placing of 3 seater sofa. dimensions w x h x d (cm)222 x 103 x 89 .nomenclature & dimensions (mm): tolarence + / - 10 mm code description specification code description specification a total width 2220 b total depth 890 c total height 1030 d seating area width 1720 e seating area depth 520 f seating area height from ground 510 g arm height 645 h arm width 250 i back height from arm 420 j back width 2060 k arm depth 610 l leg height 70 m back height from seat 660 n lumbar height from seat 410 stitching: thread : polyester pitch :- 4 ( type of thread : nylon , polyester) ( pitch of thread i.e. stitch per inch) no. of ply in thread : 3 stitching tolarence : 10 mm minimum tex # (tkt #): 75 tkt leather/pvc/fabric: (pu/pvc/cotton/ polyester/ composite) pigmented leather + pvc thickness (mm) :leather=1.5mm / pvc=0.38mm weight (gsm) : pvc=750gsm tensile strength {wrap/weft} (kg/cm) : leather=300kg/cm2 + pvc=100kg/cm2 bursting strength (kg/cm2) : adhesion (pvc/pu backing) (kg/cm) : colour fastness to rubbing {dry /wet} (scale 1-5) : leather=5 / pvc=3 frame material (tropical wood / pine wood/ rubber wood): pine wood moisture content ( recommended 12 – 18 %) :15% anti – tremite treatment (recommended borex powder treatment) : kiln drying : conventional thickness of plywood used(mm) : 3mm/9mm/12mm/18mm standard of plywood used: commercial plywood seat foam: (density, type) * provide weight of recron filling used per seat* thickness (mm) : 127mm density (kg/m3): 27 kg/m3 + 30 kg/m3 type of foam (virgin/composite/moulded/ slabstock) : virgin * please provide layerwsie detail of foam used along with details of density & thickness* back foam: (density, type) * provide weight of recron filling used per seat* thickness (mm) : recron filling 1.0kg /seat density (kg/m3): n/a type of foam (virgin/composite/moulded/ slabstock) : n/a * please provide layerwsie 1 detail of foam used along with details of density & thickness* armrest foam: (density, type) * provide weight of recron filling used per seat* thickness (mm) : 38mm density (kg/m3): 27 kg/m3 + 30 kg/m3 type of foam (virgin/composite/moulded/ slabstock) : virgin * please provide layerwsie detail of foam used along with details of density & thickness* belt/ webbing material: width of belt (mm) : n/a. total length of belt used (mm): n/a. tensile strength (kg/cm) : n/a. recommended 3-4 vertical & 3 horizontal webbing mesh & 50 % stretch while fixing spring details ( s-spring / pocket spring): thickness of s-spring (mm) : 4.0mm & 34mm width number of springs used: -4 s-springs (zig-zag springs) + 1 tie rods/ seat length of s-spring used (mm) : n/a. number of pocket springs per seat: n/a. thickness of pocket spring (mm) : n/a. * provide details of number of pocket springs & pitch * leg material: * fixing of leg : (self tapping screw / insert with metric threading) :- n/a * material of leg : (plastic / insert moulding / wooden/ ms + chrome plating / ss) :- n/a * bush for leg bottom : (pvc bush / felt pad) :- n/a bonding solution: * type of glue used : (synthetic / rubber base/ water base/ solvent base) : rubber base glue * material handling data sheet (msds) for glue polyester fibre fill : * denier : 13 * fiber hollowness : 100% * siliconized fibre * conjugated fibre stapling pins: * size of pin : (zinc plated) yes * no. of pins : bottom non-woven cloth : * gsm : 100 gsm non woven cloth * colour : black colour metal under structure detail : * bedstead size : (in mm) * pipe / tube section : ( l x b x thickness) * mesh size : ( thickness & mesh square size) plating/ coating : type of plating : powder coating salt spray test : (in hours) recommended 96 hrs of salt spray for plating & 250 hrs for coating mechanism : manual / automatic : manual mechanism make : allstar warranty of mechanism : (recommended 3 years warranty on mechanism) actuator power rating : packing specs: carton ply gsm :- number of ply : bursting strength (kg/m2) : recommended 22 – 24 bs 5 ply gsm of paper : 200-180-180- 180-180 other remarks: as per specification or picture warranty : 2 years warranty for sofa upholstery 3 years warranty for recliner mechanism 4 providing, supplying and placing of 1 seater sofa. dimensions w x h x d (cm) 107 x 103 x 89. nomenclature & dimensions (mm): tolarence + / - 10 mm code description specification code description specification a total width 1070 b total depth 890 c total height 1030 d seating area width 580 e seating area depth 520 f seating area height from ground 510 g arm height 645 h arm width 250 i back height from arm 420 j back width 925 k arm depth 610 l leg height 70 m back height from seat 660 n lumbar height from seat 410 stitching: thread : polyester pitch :- 4 ( type of thread : nylon , polyester) ( pitch of thread i.e. stitch per inch) no. of ply in thread : 3 stitching tolarence : 10 mm minimum tex # (tkt #): 75 tkt leather/pvc/fabric: (pu/pvc/cotton/ polyester/ composite) pigmemted leather + pvc thickness (mm) :leather=1.5mm / pvc=0.38mm weight (gsm) : pvc=750gsm tensile strength {wrap/weft} (kg/cm) : leather=300kg/cm2 + pvc=100kg/cm2 bursting strength (kg/cm2) : adhesion (pvc/pu backing) (kg/cm) : colour fastness to rubbing {dry /wet} (scale 1-5) : leather=5 / pvc=3 frame material (tropical wood / pine wood/ rubber wood): pine wood moisture content ( recommended 12 – 18 %) :15% anti – tremite treatment (recommended borex powder treatment) : kiln drying : conventional thickness of plywood used(mm) : 3mm/9mm/12mm/18mm standard of plywood used: commercial plywood seat foam: (density, type) * provide weight of recron filling used per seat* thickness (mm) : 127mm density (kg/m3): 27 kg/m3 + 30 kg/m3 type of foam (virgin/composite/moulded/ slabstock) : virgin * please provide layerwsie detail of foam used along with details of density & thickness* back foam: (density, type) * provide weight of recron filling used per seat* thickness (mm) : recron filling 1.0kg /seat density (kg/m3): n/a type of foam (virgin/composite/moulded/ slabstock) : n/a * please provide layerwsie detail of foam used along with details of density & thickness* armrest foam: (density, type) * provide weight of recron filling used per seat* thickness (mm) : 38mm density (kg/m3): 27 kg/m3 + 30 kg/m3 type of foam (virgin/composite/moulded/ slabstock) : virgin * please provide layerwsie detail of foam used along with details of density & thickness* belt/ webbing material: width of belt (mm) : n/a. total length of belt used (mm): n/a. tensile strength (kg/cm) : n/a. recommended 3-4 vertical & 3 horizontal webbing mesh & 50 % stretch while fixing spring details ( s-spring / pocket spring): thickness of s-spring (mm) : 4.0mm & 34mm width number of springs used: 4 s-springs (zig-zag springs) + 1 tie rods per seat length of s-spring used (mm) : n/a. number of pocket springs per seat: n/a. thickness of pocket spring (mm) : n/a. * provide details of number of pocket springs & pitch * leg material: * fixing of leg : (self tapping screw / insert with metric threading) :- n/a * material of leg : (plastic / insert moulding / wooden/ ms + chrome plating / ss) :- n/a * bush for leg bottom : (pvc bush / felt pad) :- n/a bonding solution: * type of glue used : (synthetic / rubber base/ water base/ solvent base) : rubber base glue * material handling data sheet (msds) for glue polyester fibre fill : * denier : 13 * fiber hollowness : 100% * siliconized fibre * conjugated fibre stapling pins: * size of pin : (zinc plated) yes * 2 no. of pins : bottom non-woven cloth : * gsm : 100 gsm non woven cloth * colour : black colour metal under structure detail : * bedstead size : (in mm) * pipe / tube section : ( l x b x thickness) * mesh size : ( thickness & mesh square size) plating/ coating : type of plating : powder coating salt spray test : (in hours) recommended 96 hrs of salt spray for plating & 250 hrs for coating mechanism : manual / automatic : automatic mechanism make : allstar warranty of mechanism : (recommended 3 years warranty on mechanism) actuator power rating : 50w packing specs: carton ply gsm :- number of ply : bursting strength (kg/m2) : recommended 22 – 24 bs 5 ply gsm of paper : 200-180-180- 180-180 other remarks: as per specification or picture warranty : 2 years warranty for sofa upholstery 3 years warranty for recliner mechanism & actuator 5 providing, supplying and placing of coffee table overall size : width: 100cm depth : 65cm height : 43cm table materials: glass of 08 mm thk tempered, solid rubber woood legs and frame, ms sheet as bottom shelf .decoration materials & specifications: (density / type): pu coating to the rubber wood parts, clear glass rubber wood understructure with 12 mm tempered glass top. ms sheet at the base, with a laser-cut floral design, can be used as a display shelf.tapered legs with enhanced aesthetics 1 6 providing, supplying and placing of high back chair. seat assembly: the cushioned seat inner is made of injection moulded glass filled polyamide.upholstered seat sub-assembly consists of moulded high resilience (hr) polyurethane foam of density 45±2 kg/m³, and hardness load 16 ± 2 kgf as per is:7888 for 25% compression. *seat size: 45.5cm. (d) x 52.4cm. (w) back assembly: the cushioned back is made of pu foam with polypropylene injection molded plastic inner. *high back size: 50.5 cm. (w) x 76.7 cm. (d) armrests: the armrest having four range of adjustment · height adjustment sub assembly is inserted in the aluminum die cast arm body & all other adjustment are provided in adjustable arm top sub assembly. · up-down adjustment has 8 position (10.5±0.5cm range) · arm top swivel adjustment- 2 position, 12°±2° swivel inside · arm top width adjustment - any position (2.0±0.5cm range each arm top) · arm top to - fro adjustment- any position (4.0±0.5cm range) · armrest top is made up of high density pu molded over glass filled polyamide inner. posture perfect mechanism: the adjustable tilting mechanism is designed with the following features: · 360° revolving type. · forward tilt of sesat and back. · upright tilt lock. · tilt tension adjustment can be operated in seating position. · 3-position tilt limiter. seat depth adjustment: seat depth adjustment is housed below the seat and integrated with the mechanism with help of polypropene seat cover. seat depth can be adjusted in sitting position. seat depth adjustment range is of 5.0±0.5 cm. adjustable back support: back assembly is connected to buff polish die cast aluminum spine with an up-down mechanism assembly. back height can be adjusted in sitting position. it can be adjusted in the range of 7.5±0.5 cm. pneumatic height adjustment: the heavy duty class 4 pneumatic height adjustment has an adjustment stroke of 13.0±0.3 cm. pedestal: the pedestal is made of die-cast aluminium with buffing finish. it is fitted with 5nos. twin wheel castor. the pedestal is 67.0 ± 0.5cm pitchcenter dia. twin wheel castor: 5 nos. twin wheel soft castors are injection moulded in poly-amide with pu lining, having 6.5±0.1cm wheel diameter and assembled to pedestal. width (w): 74.0 cm. depth (d): 74.0 cm. height (h): 112.0 - 132.5 cm. seat height (sh): 44.5 - 58.0 cm. 2 7 providing, supplying and placing of visitor chair. chair upperstructure: it is a single shell 1.2 ±0.1cm. thick hot pressed plywood with moulded polyurethane foam on top & backing foam on rear side. it is upholstered with option of knitted & leatherette fabric.the seat has extra thick foam on front edge to give comfort to popliteal area.the foam backing done in back for extra fluffiness and comfort in chair. seat & back high resilience (hr) polyurethane foam :the hr polyurethane foam for seat and back is moulded with density 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf as per is:7888 at 25% compression. m.s. visitor tubular frame : the powder coated (dft 40-60 micron) tubular frame is cantilever type & made of ø2.54±0.03 cm x 0.2±0.016 cm thk ms erw tube. armrests:the armrest top is moulded from polyurethane(pu) with metal insert and mounted on to a tubular frame. width (w): 60.5 cm. depth (d): 65.0 cm. height (h): 86.5 cm. seat height (sh): 46.0 cm 6 8 supplying and placing in position conference table of the following specifications. its size shall be 2400 width mm x 1200 depth mm x 750 height mm . top work surface shall be 12 mm thick tougher glass with back painted design on to under side and crystal edge polish finish . the construction shall be knock down construction . the understructure shall have all panels made from 36 mm thick pre-laminated board with 2 mm thick pvc edge beading . understructure also consists of storage for cpu , projector and paper storage . provision for glass adjustment for glass aligning . the wire management shall have legrand electricals used for wire management on tocentre support beam panel and cpu storage area for socket connections ,rj11,rj45 . 1 9 providing, supplying and placing of high back chair. seat/back assembly: the seat should be made up of 1.2 ±0.1cm. thick hot pressed plywood upholstered with fabric or synthetic leather and moulded polyurethane foam. the back should be made up 1.2 ±0.1cm. thick hot pressed plywood and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. the back ply and foam should be designed with contoured lumber support for comfortable seating posture. back size: 48cm.(w) x 76.0cm.(h) seat size: 51.0cm.(w) x 48.0cm.(d) high resilience (hr) polyurethane foam: the hr polyurethane foam for seat and back should be moulded with density = 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf for 25% compression. armrests :the armrest top should be made of moulded polyurethane (p.u) and mounted on to a drop lift height adjustable type m.s. tubular armrest support chrome plated. the armrest height should be adjustable up to 6.5±0.5cm. in 5 steps . knee tilt synchro mechanism with seat depth adjustment mechanism: the mechanism should be designed with the following features: • 360° revolving type single point control. • front pivot for tilt with feet resting on ground ensuring more comfort. • tilt tension adjustment. • 4-position locking with anti-shock feature. • seat back tilting ratio of 1:2 • seat depth adjustment of 6.0 ±0.5cm. can be locked in 6 positions adjustable backrest: the backrest consshould be ts of a sliding up down mechanism, which can be adjusted in the range of 7.5±0.5cm. and can be locked in 5 positions for correct position of lumber support. pneumatic height adjustment: the pneumatic height adjustment has an adjustment of 10.0±0.3cm. pedestal assembly: the pedestal should be fabricated from 0.2 ± 0.02 cm thick hr sheet . chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. the pedestal should be 66.0±0.5cm. pitch-center dia. (76.0±1.0 cm with castors). twin wheel castors the twin wheel castors should be injection moulded in black nylon. overall dimensions of chair seat height - min 47.5 to max 57.5cm. height - min 103.5 to max 120.5cm. width & depth of chair as measured from pedestal - width-76.0 cm and depth-76.0 cm. 8 10 providing, placing and supplying of table: high-density high moisture resistance (hdhmr) worktop : worktop is made of 25mm thick pre-laminated hdhmr board. all edges of work surfaces shall provide with machinepessed 2mm thick pvc lipping glued with hot melt eva glue. the work tops are available in square (900x900). trio leg for 4 legged table: trio legs is fabricated from combination of 1.2 mm, 2 mm thk crca (as per is: 513), 3mm, 5mm thk hr (as per is: 2062) which has a triangular shape. argo shield welding is used for fabrication. this is a three dimensional leg which has inclination in 2 planes, it has a ball socket m8 leveler with bottom translucent cap, that allows adjustment up to 50 mm height. the whole structure is epoxy polyster powder coated (dft 40-60 microns). it is assembled using alloy steel hardware (ni / zn plated). cross member / connector : cross members in the upbeat system are made from 50 mm x 25 mm x 1.2mm thk (as per is: 7138 erw). cross members are assembled by friction fit pdc joinery and grub screws. the whole structure is epoxy polyster powder coated (dft 40-60 microns). it is assembled using alloy steel hardware (ni / zn plated). cross are available in 3 lengths, viz.: ( 350mm, 1100mm & 1700mm). 1 11 providing, placing and supplying of wood chair. wood understructure assembly: the under structure is made up of solid steamed beech wood of first grade and adjustable plinth screw. u/s assembly: 51.7cm (w) x 50cm (d) x 36.7cm (h) seat assembly: the seat is made up of 1.2 ± 0.1 cm thick hot - pressed plywood moulded by high resilience pu foam -density:65 ± 5kg/cu.m and upholstered with fabric. seat assembly: 49.5cm (w) x 47.6cm (d) x 8.3cm (h). back assembly: the back is made up of dia. 1cm ms rod -is:2062 and 0.6cm thk hr plate -is:2062 welded together and moulded by high resilience pu foam -density:65 ± 5kg/cu.m and upholstered with fabric. back assembly: 62.5cm (w) x 49.7cm (d) x 46.5cm (h). width: 62.5cm depth: 63.3cm height: 78.4cm seat height: 45cm

Agency / Dept : central board of indirect taxes and customs CBIC
Tender Value : 40000000
Due Date : May 26, 2026
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15878343
Location : indore , madhya pradesh
Source : GEM Tenders

tender for shoe comp brake rear , bush cushion rubber , pressure plate bearing kit , combi switch ms harness , master cyl repair kit minor , master cyl rep kit , repair kit major sleeve cylinder , assy clutch pressure plate 330 dia , 352 dia clutch disc assy 1 75 spline , repair kit for spring brack chamber , bush hub bottom , expansion valve, mc 100cc hero honda hf deluxe bs-iv 2025, truck 2.5 ton tata 4x4 713/32 2015, lpo 1510 1512tc/55 pre-fabricated bus 2006, lorry 5/7.5 ton ashok leyland stallion 4x4 mark-iii 2009, lpo 1512tc/55 pre fabricated bus 2005, tata winger ambulance 2014

Agency / Dept : indian army
Tender Value : 0
Due Date : Jun 29, 2026
View Documents
T18 Ref No : 16211132
Location : muzaffarnagar , uttar pradesh
Source : GEM Tenders

corrigendum tender for erection and fabrication work a 1 , erection and fabrication work a 2 , erection and fabrication work a 3 , erection and fabrication work a 4 , erection and fabrication work a 5 , erection and fabrication work a 6 , erection and fabrication work a 7 , erection and fabrication work a 8 , erection and fabrication work a 9 , erection and fabrication work a 10 , erection and fabrication work a 11 , erection and fabrication work a 12 , erection and fabrication work a 13 , erection and fabrication work a 14 , erection and fabrication work a 15 , erection and fabrication work a 16 , erection and fabrication work a 17 , erection and fabrication work a 18 , erection and fabrication work a 19 , erection and fabrication work a 20 , erection and fabrication work a 21 , erection and fabrication work a 22 , erection and fabrication work a 23 , erection and fabrication work a 24 , erection and fabrication work a 25 , erection and fabrication work a 26 , erection and fabrication work a 27 , erection and fabrication work a 28 , erection and fabrication work a 29 , erection and fabrication work a 30 , erection and fabrication work a 31 , erection and fabrication work a 32 , erection and fabrication work a 33 , erection and fabrication work a 34 , erection and fabrication work a 35 , erection and fabrication work a 36 , erection and fabrication work a 37 , erection and fabrication work a 38 , erection and fabrication work a 39 , erection and fabrication work a 40 , erection and fabrication work a 41 , erection and fabrication work a 42 , erection and fabrication work a 43 , erection and fabrication work a 44 , erection and fabrication work a 45 , erection and fabrication work a 46 , erection and fabrication work a 47 , erection and fabrication work a 48 , erection and fabrication work a 49 , erection and fabrication work a 50 , erection and fabrication work a 51 , erection and fabrication work a 52 , erection and fabrication work a 53 , erection and fabrication work a 54 , erection and fabrication work a 55 , erection and fabrication work a 56 , erection and fabrication work a 57 , erection and fabrication work a 58 , erection and fabrication work a 59 , erection and fabrication work a 60 , erection and fabrication work a 61 , erection and fabrication work a 62 , erection and fabrication work a 63 , erection and fabrication work a 64 , erection and fabrication work a 65 , erection and fabrication work a 66, erection and fabrication work a, cut out and remove the weakened and worn-out portions of the discharge chute of the mill scraper. fabricate new sections using 12 mm thick plates, reinstall them, and provide perforated plates as per the scraper profile. weld and fix them securely, then conduct a satisfactory trial. remove the worn-out runner base of the cane carrier. fabricate a new runner base using a 100 mm channel box, installation it, and straighten, reverse, and reinstall the old channel. remove the worn 40/50 mm square bars of the cane unloader and replace them with new square bars of the same size. conduct a satisfactory trial. remove the worn runners of the cane carrier, rake carrier, bagasse elevator, and r.b.c. replace them by reversing the old runners or installing new runners as required. remove the worn or damaged side plates of the chains of the cane carrier, rake carrier, and r.b.c. replace them with repaired old plates or new plates. remove the worn side plates of the fibrizer hood. installation new plates, weld them from both inside and outside, and conduct a satisfactory trial. carry out complete overhauling, testing, and trial of the bagasse baling machine. perform the required repairs on the old racks of the s.r.c. and i.r.c. fabricate new racks for the bagasse elevator/r.b.c. chains as per the sample. fabricate and installation new top and bottom covers of the t.r.p.f. as per the existing design and conduct a satisfactory trial. remove the worn tail-end boots of the s.r.c./i.r.c. fabricate new boots from 8 mm/10 mm thick plates as per the sample, installation them, carry out leak-proof welding, and conduct a satisfactory trial. dismantle the grabs of the cane unloaders, repair all parts, perform hardfacing on the fingers as instructed, reassemble the grabs, and conduct a satisfactory trial. remove the damaged juice tray used for compound imbibition in the mills. fabricate and installation a new tray as per the sample and reconnect all fittings. remove the worn guides provided to prevent the chains of the cane carrier, s.r.c., i.r.c., and bagasse elevator from lifting. fabricate and installation new guides as instructed and conduct a satisfactory trial. repair the worn wheels of the bridge/trolley drive of the cane unloaders by welding as instructed. remove the damaged twin chutes of the t.r.p.f. fabricate new twin chutes matching the existing design and erect them in position. fabricate and fit m.s. rings on the idler wheels of the cane carrier. provide a 25 mm thick plate support between the mill headstock and the t.r.p.f. headstock as instructed. repair the old hammer shanks of the fibrizer by welding, hardfacing, and balancing. remove the damaged hoods of the cane chopper/leveller. fabricate and installation new folding-type hoods. replace the broken pocket plates of the pocket-type anvil plate of the fibrizer with new plates. straighten bent plates, weld them, and perform hardfacing as instructed. build up the worn hub surfaces of the cane leveller/chopper rotor assembly by welding, machine them flat, and perform hardfacing. remove the weakened motor and gearbox beds of the cane unloaders. fabricate modified new beds, installation them, align the motor and gearbox, and conduct a trial. strengthen the weakened columns of the cane carrier structure by welding reinforcing plates. fabricate and fit juice rings in the mill rollers as per the sample. carry out the required repairs to the pressure chutes between the t.r.p.f. and the mill. remove the damaged mill juice receiving tank. fabricate a new tank using 8 mm/10 mm thick plates, installation it, reconnect all connections, and conduct a leak-proof trial. remove the damaged bottom cone of the mill juice receiving tank. fabricate and installation a new cone as per the sample, reconnect all fittings, and conduct a leak-proof trial. remove the damaged 10"/12" pipes between the mill juice tray and the gutter. fabricate and installation new stainless steel pipes and conduct a leak-proof trial. provide 3 mm thick stainless steel lining in the bottom trough of the s.r.c./i.r.c. with leak-proof welding. remove the loose bed of boiler feed pump no. 1, fabricate and installation a new bed, reconnect all fittings, and conduct a trial. fabricate a leak-proof damper in the old i.d. fan ducting before the chimney so that there is no backflow of air when the new i.d. fan operates. remove the nipple reducers and damaged pipelines of all three wet scrubber pumps. installation new pipelines and carry out leak-proof welding. remove all nozzles inside the wet scrubber venturi, replace damaged nozzles with new ones, and reconnect all fittings. fabricate a new backwash pipeline from old boiler tubes between the service tank and wet scrubber. installation new valves, clamps, and complete all connections. remove the damaged juice tray below the t.r.p.f. leading to the mill juice tray. fabricate and installation a new tray. remove damaged ash chutes of the boilers. fabricate new chutes from old/new plates matching the original design and installation them. repair the damaged dampers of air heaters, economizers, and f.d./i.d. fan inlet, outlet, suction, and delivery ducts. fabricate new frames and fit new mesh/screens for the internal steam filters of the boiler drums. remove the damaged flue gas ducting between the i.d. fans and chimney. fabricate and installation new ducting from 5–6 mm thick plates and conduct a leak-proof trial. fabricate new impellers for the bagassilo fan as per the sample, repair the casing, and conduct a successful trial. remove the damaged suction cones of the i.d./f.d. fan casings. fabricate and installation new cones as per the sample and conduct a satisfactory trial. replace the damaged perforated baffle plates inside the boiler feed tank. remove and repair the damaged bagasse feeding chutes of boilers 1, 2, and 3. replace the damaged air headers supplying additional f.d. air to the furnaces of 20-ton boilers 1 and 2. replace the damaged ducting between the air heater and i.d. fan with new ducting made from 5–6 mm thick plates. replace damaged perforated screens used for bagasse filtration in the bagasse elevator. remove the economizer coils/tubes of 20-ton boilers 1 and 2, clean them internally and externally, conduct hydraulic testing, reinstall them, make them leak-proof, and carry out final hydraulic testing. remove damaged trough channels/plates of the s.r.c./i.r.c., fabricate replacements as instructed, and installation them. fabricate and installation angle iron strengthening rings on the boiler chimney. strengthen the damaged truss-type bridge structure of the cane unloader using new channels, angles, and plates. weld and restore the enlarged holes of the block-type chain links of the s.r.c./i.r.c., redrill pin holes, and grind the surfaces smooth. replace the worn rack attachment links of the s.r.c./i.r.c. chains with new 12 mm thick plate attachments, weld them, and drill holes as per the drawing. construct separate access platforms for all three cane unloaders using old angle channels. replace the damaged portions of the i.d. fan casing, air heater cell/ducting, and economizer cell. replace the old m.s. plates of the s.r.c./i.r.c. trough and boot, make them leak-proof, and provide 3 mm stainless steel lining. fabricate new racks for the s.r.c./i.r.c. chains from 25 mm thick plates, drill holes, and provide roller supports at both ends. remove the bent 250 mm channel of the cane unloader trolley, restore line and level, strengthen the structure, fit a new runner square bar, check diagonals, and align the wheels. dismantle all four wheels of the mill and powerhouse cranes, clean them, inspect bearings, grease all plumber blocks, replace damaged bearings from mill spares, repair worn wheels by welding, and conduct a satisfactory trial. repair the worn shells and teeth of the t.r.p.f. top and bottom rollers by hardfacing. fit rings on both sides to compensate for reduced shell length. remove the damaged mill juice tray and fabricate a new tray using 5 mm stainless steel plate as per the sample. conduct a leak-proof trial. repair the stainless steel juice tray of the mill. remove the mill headstock if cracked or misaligned, re-grout it, realign it, and complete all associated works. remove the shaft of the damaged t.r.p.f. roller and dismantle the shell using gas cutting. cut old 63.5 mm boiler tubes with bends, prepare 5.1-meter straight tubes for the air heater, and clean them by grinding.

Agency / Dept : uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Tender Value : 1657196
Due Date : Jul 13, 2026
View Documents
T18 Ref No : 16025273
Location : indore , madhya pradesh
Source : GEM Tenders

corrigendum tender for shoe comp brake rear , bush cushion rubber , pressure plate bearing kit , combi switch ms harness , master cyl repair kit minor , master cyl rep kit , repair kit major sleeve cylinder , assy clutch pressure plate 330 dia , 352 dia clutch disc assy 1 75 spline , repair kit for spring brack chamber , bush hub bottom , expansion valve, mc 100cc hero honda hf deluxe bs-iv 2025, truck 2.5 ton tata 4x4 713/32 2015, lpo 1510 1512tc/55 pre-fabricated bus 2006, lorry 5/7.5 ton ashok leyland stallion 4x4 mark-iii 2009, lpo 1512tc/55 pre fabricated bus 2005, tata winger ambulance 2014

Agency / Dept : indian army
Tender Value : 0
Due Date : Jul 02, 2026
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15982890
Location : muzaffarnagar , uttar pradesh
Source : GEM Tenders

tender for erection and fabrication work a erection and fabrication work a 1 , erection and fabrication work a 2 , erection and fabrication work a 3 , erection and fabrication work a 4 , erection and fabrication work a 5 , erection and fabrication work a 6 , erection and fabrication work a 7 , erection and fabrication work a 8 , erection and fabrication work a 9 , erection and fabrication work a 10 , erection and fabrication work a 11 , erection and fabrication work a 12 , erection and fabrication work a 13 , erection and fabrication work a 14 , erection and fabrication work a 15 , erection and fabrication work a 16 , erection and fabrication work a 17 , erection and fabrication work a 18 , erection and fabrication work a 19 , erection and fabrication work a 20 , erection and fabrication work a 21 , erection and fabrication work a 22 , erection and fabrication work a 23 , erection and fabrication work a 24 , erection and fabrication work a 25 , erection and fabrication work a 26 , erection and fabrication work a 27 , erection and fabrication work a 28 , erection and fabrication work a 29 , erection and fabrication work a 30 , erection and fabrication work a 31 , erection and fabrication work a 32 , erection and fabrication work a 33 , erection and fabrication work a 34 , erection and fabrication work a 35 , erection and fabrication work a 36 , erection and fabrication work a 37 , erection and fabrication work a 38 , erection and fabrication work a 39 , erection and fabrication work a 40 , erection and fabrication work a 41 , erection and fabrication work a 42 , erection and fabrication work a 43 , erection and fabrication work a 44 , erection and fabrication work a 45 , erection and fabrication work a 46 , erection and fabrication work a 47 , erection and fabrication work a 48 , erection and fabrication work a 49 , erection and fabrication work a 50 , erection and fabrication work a 51 , erection and fabrication work a 52 , erection and fabrication work a 53 , erection and fabrication work a 54 , erection and fabrication work a 55 , erection and fabrication work a 56 , erection and fabrication work a 57 , erection and fabrication work a 58 , erection and fabrication work a 59 , erection and fabrication work a 60 , erection and fabrication work a 61 , erection and fabrication work a 62 , erection and fabrication work a 63 , erection and fabrication work a 64 , erection and fabrication work a 65 , erection and fabrication work a 66, erection and fabrication work a, cutting and removing the weak/broken parts of the discharge chute for the scraper in the mill, fabricating new parts from 12 mm plate, reinstalling them, fixing hole plates as per profile by welding to secure the scraper, and conducting a trial after completion of work., cutting and removing the worn/weak runner base of the cane carrier, fabricating a box structure using 100 mm channel to installation the runner base, fitting it properly, and straightening and reusing the old channel by turning it over., cutting and removing the old worn/cut 40/50 mm square bars of the cane unloader and installing new square bars in their place as before, followed by a satisfactory trial., cutting and removing the worn/cut runners of the cane carrier/rake carrier/bagasse elevator/r.b.c., reinstalling them by either turning over the old ones or fitting new runners as per original design., cutting and removing the worn/cut/weak side plates of chains used in cane carrier/rake carrier/r.b.c., and installing old or new plates in their place., cutting and removing the worn/weak side plates of the fibrizer hood, installing new plates, welding inside and outside, and conducting a satisfactory trial., complete overhauling, testing, and trial of the bagasse baling machine., performing necessary repairs on the old racks of s.r.c./i.r.c., fabricating new racks as per sample for the chains of bagasse elevator/r.b.c., replacing the weak/broken bottom/top covers of t.r.p.f. by fabricating and installing new covers as per original design, and conducting a satisfactory trial., cutting and removing the weak/broken tail end boots of s.r.c./i.r.c., fabricating new ones from 8.0/10.0 mm old/new plate as per sample, installing, leak-proof welding, and conducting a satisfactory trial., dismantling various parts of the cane unloader grabs, repairing all parts, hardfacing the fingers as per instructions, and reassembling the grabs., cutting and removing the weak/broken juice tray used for compound imbibition in mills, fabricating a new tray from plate as per sample, installing it in place, and making all connections., cutting and removing the worn/weak guides that prevent chains of cane carrier/s.r.c./i.r.c. and bagasse elevator from lifting, fabricating new guides as per instructions, installing them, and conducting a satisfactory trial., welding the worn/cut wheels of the cane unloader bridge/trolley drive as per instructions., cutting and removing the weak/broken donali chutes of t.r.p.f., fabricating new donali chutes as per the old ones, and erecting them in place., fabricating and installing m.s. rings on the idler wheel of the cane carrier as per instructions., fabricating and installing a support using 25.0 mm plate between the mill head stock and t.r.p.f. head stock as per instructions., repairing and balancing the old hammer shanks of the fibrizer by welding and hardfacing as per instructions., cutting and removing the worn/weak hoods of the cane chopper/leveller and fabricating a new folding type from new plate and installing it., replacing the broken plates in the pockets of the fibrizer's pocketed type anvil plate with new plates, straightening bent plates, welding, and hardfacing as per instructions., welding and leveling the worn hubs of the cane leveller/chopper rotor assembly on the working side and top sides, and hardfacing as per instructions., cutting and removing the weak beds of reduction gears and motors on cane unloaders, modifying and fabricating new beds, installing them, aligning the gear and motor, and conducting a trial., strengthening the weak/broken columns of the cane carrier structure by welding plates as per instructions., fabricating and fitting juice rings in the mill rollers as per sample., performing necessary repairs on the pressure chutes installed between t.r.p.f. and the mill., cutting and removing the weak/broken juice receiving tank of the mills, fabricating a new tank from 8.0/10.0 mm plate as per sample, fitting it in place, making all connections, and conducting a leak-proof trial., cutting and removing the weak/broken bottom cone of the mill's juice receiving tank, fabricating a new cone as per sample, fitting it in place, making all connections as before, and conducting a leak-proof trial., cutting and removing the weak/broken 10 inch/12 inch pipes between the mill juice tray and gutter, fabricating and fitting new s.s. pipes in their place, and conducting a leak-proof trial., lining the bottom trough of s.r.c./i.r.c. with 3.00 mm thick s.s. plate and doing leak-proof welding., removing the shifted bed of feed pump no. 1 on the boiler, fabricating and installing a new bed, making related connections, and conducting a trial., making the damper in the old i.d. fan ducting at the boiler station leak-proof using new/old plate before the chimney and doing complete welding so that when the new i.d. runs, there is no back air from the chimney., cutting and removing the nipple reducers of all three wet scrubber pumps and their leaking pipe lines, installing new pipe lines, and making all connections as before with leak-proof welding., opening all nozzles inside the wet scrubber venturi, removing damaged nozzles, installing new nozzles, and making all connections as before., fabricating new pipes from old boiler tubes for backwash from the service tank to the wet scrubber, and making all connections with new valves and clamps in the pipeline., cutting and removing the weak and leaking juice tray from under the t.r.p.f. that brings juice to the mill juice tray, and fabricating and installing a new one., cutting and removing the weak/broken ash chutes of the boilers, and fabricating and fitting new chutes from old/new plate as per the old ones., performing necessary repairs on the weak/broken dampers of air heaters, economizers, and f.d./i.d. fans' inlets/outlets or suction/delivery., replacing the frames and grids of the internal steam filter fitted in the boiler drums by fabricating new frames and fitting grids., cutting and removing the weak/broken flue gas ducting between the i.d. fans and the chimney, fabricating and installing new ducting from 5.0/6.0 mm thick plate, and conducting a leak-proof trial., for the weak bagassilo fan, fabricating a new impeller as per sample, repairing the casing as necessary, and conducting a successful trial., cutting and removing the weak/broken suction cones in the casings of i.d./f.d. fans, fabricating and installing new cones as per sample, and conducting a successful trial., replacing the damaged weak grids/perforated sheets of the baffle plates inside the boiler feed tank., cutting and removing the weak/broken bagasse feeding chutes of boiler no. 1, 2, and 3, and performing necessary repairs., replacing the weak/broken air headers installed outside for supplying additional f.d. air in the furnace of 20-ton capacity boiler no. 1 and 2 with new headers., cutting the weak/broken ducting between the air heater and i.d. fans and fabricating and installing new ducting from 5/6 mm thick plate., removing damaged perforated grids in the bagasse elevator used for bagasse to bagassilo filtration and fitting new grids., lowering the economizer coils/tubes of 20-ton capacity boiler no. 1 and 2, cleaning them internally and externally, conducting hydraulic testing at standard pressure, and after testing, lifting and refitting them, making the economizer bands leak-proof, and conducting a satisfactory hydraulic test., cutting and removing the weak/broken channel/plate of the s.r.c./i.r.c. trough and fabricating and installing new ones as per instructions., fabricating and installing angle iron rings for strengthening the boiler chimney., strengthening the weak and damaged truss-type bridge structure of the cane unloader by adding new channels, angles, and plates to provide satisfactory strength., welding the oval/worn enlarged holes on both ends of the block-type chain links of s.r.c./i.r.c. chains, drilling pin-size holes in the attachment, and grinding the faces to level., cutting and removing the worn/weak attachment used for fixing racks on the block-type chain links of s.r.c./i.r.c. chains, fabricating new attachment links from 12 mm thick plate as before, welding them onto the links, and drilling holes as per drawing., constructing a separate platform path using old angle channels for access to all three unloaders., replacing the weak/broken parts of i.d. fan casing, air heater cell/ducting, and economizer cell., cutting and removing the old m.s. plate of the bottom trough and boot of s.r.c./i.r.c., installing new plate to make the trough and boot leak-proof, and lining the boot and trough with 3 mm thick s.s. plate, followed by a satisfactory trial., fabricating new racks from 25 mm thick plate as per sample for s.r.c./i.r.c. chains, drilling holes, cutting and supporting chain rollers on both ends, and preparing them., removing the bent 250 mm channel of the trolley in the cane unloader, leveling it, strengthening the structure, fitting worn/weak runner square bars, checking diagonals, and leveling the wheel., removing all four wheels of the mill and power house crane, cleaning, checking bearings, greasing all plumber blocks, replacing damaged bearings with mill spares, welding worn wheels to a uniform size, and conducting a satisfactory trial., performing necessary repairs and hardfacing on the worn shells/teeth of t.r.p.f. top/bottom rollers, and adding rings on both sides as needed to compensate for reduced shell length., cutting and removing the weak/leaking juice tray of the mill and fabricating a new one from 5 mm s.s. plate as per sample, and conducting a leak-proof trial., performing necessary repairs on the damaged s.s. juice tray of the mill., in case of head stock cracking or misalignment, removing the head stock, regrouting, aligning, and completing all related work., removing the shaft of the damaged t.r.p.f. roller and dismantling the shell using gas cutting., cutting the 63.5 mm old boiler tubes with bends, making a 5.1 meter straight line, preparing them for the air heater, and cleaning them by grinding.

Agency / Dept : uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Tender Value : 1657196
Due Date : Jul 10, 2026
View Documents
Published By

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Fabricated Hub. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Fabricated Hub sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Fabricated Hub Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Fabricated Hub, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Fabricated Hub Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Fabricated Hub Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Fabricated Hub.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Fabricated Hub depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Fabricated Hub Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Fabricated Hub bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Fabricated Hub. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Fabricated Hub, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Fabricated Hub, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Fabricated Hub?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Fabricated Hub tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Fabricated Hub?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Fabricated Hub, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Fabricated Hub is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All