tender for jungle boot;-1. upper shall consist of polyester viscose (pv) fabric, water-repellent as an outer layer and 100% non- woven nylon (camarilla type) lining as inner layer. the two fabrics shall be adhered together with flexible adhesive and polyurethane foam of 5 mm thickness. colour-olive green,colour of sole and toe cap-black (for all other boots),blend composition of polyester viscose fabric water repellent-polyester- 80% viscose-remainder.binding material of polyester blended fabric, black having blend composition of polyester-67%, cotton -33% & confirming to is:15852-2009 for colour fastness to light, washing & ph value. in socks- in sock each boot shall be provided with a detachable 4.0 mm + 1.0 mm thick full in sock of compressed molded rubber having instep arch support and adequate ribs for grip ad comfort. the outer layer of the knock hill be covered with cambrelle type material in black color. toe cap &stiffener well struck heat activated thermoplastic toe puff & stiffeners of minimum thickness 1.5 mm & 2 mm respectively shall be used.thread polyester- nil lace each pair of boots shall be provided with a pair of nylon black laces of length160 +width 6 cm. thickness of sole in the finished condition, 1 min. thickness of sole 4mm 2. cleat height 2.5 mm 3. thickness of sole when measured from outside with side wall forepart 20mm. 4.thickness of sole when measured at waist from outside with side wall(mm)16, 5. thickness of sole when measured at heel from outside with side wall(mm) (min)35. 6. mass the mass of one pair of finished boots of size 8 shall be 750 to 850 gms with an increase or decrease of 50 gms for each bigger or smaller size respectively. 7-marking the outsole of the boot must be embossed /engraved with the manufacturers name or his recognized trade mark, size, month and year of manufacture.8- packing each pair of boots shall be packed in individual boxes to prevent damage., jungle boot;-1. upper shall consist of polyester viscose (pv) fabric, water-repellent as an out er layer and 100% non- woven nylon (camarilla type) lining as inner layer. the two fabrics shall be adhered together with flexible adhesive and polyurethane foam of 5 mm thickness. colour-olive green,colour of sol e and toe cap-black (for all other boots),blend composition of polyester viscose fabric water repellent-poly ester-80% viscose-remainder.binding material of polyester blended fabric, black having blend composition of polyester-67%, cotton -33% & confirming to is:15852-2009 for colour fastness to light, washing & ph val ue. in socks- in sock each boot shall be provided with a detachable 4.0 mm + 1.0 mm thick full in sock of c ompressed molded rubber having instep arch support and adequate ribs for grip ad comfort. the outer laye r of the knock hill be covered with cambrelle type material in black color. toe cap &stiffener well struck he at activated thermoplastic toe puff & stiffeners of minimum thickness 1.5 mm & 2 mm respectively shall be used.thread polyester- nil lace each pair of boots shall be provided with a pair of nylon black laces of len gth160 +width 6 cm. thickness of sole in the finished condition, 1 min. thickness of sole 4mm 2. cleat heig ht 2.5 mm 3. thickness of sole when measured from outside with side wall forepart 20mm. 4.thickness of sole when measured at waist from outside with side wall(mm)16, 5. thickness of sole when measured at he el from outside with side wall(mm) (min)35. 6. mass the mass of one pair of finished boots of size 8 shall be 750 to 850 gms with an increase or decrease of 50 gms for each bigger or smaller size respectively. 7-mark ing the outsole of the boot must be embossed /engraved with the manufacturers name or his recognized tr ade mark, size, month and year of manufacture.8- packing each pair of boots shall be packed in individual boxes to prevent damage. - warranty period: 30 months after the date of delivery pl code : 799049340011

You can fill out the integrated inquiry form below on this detail page to share your company profile. Our consultancy desk will review your query regarding parameters and guide you on how to coordinate efficiently with the procurement team of East Coast Railway ECOR

Tender18 provides end-to-end professional bidding support and documentation advisory for Tender For Jungle Boot;-1. Upper Shall Consist Of Polyester Viscose (pv) Fabric, Water-repellent As An Outer Layer And 100% Non- Woven Nylon (camarilla Type) Lining As Inner Layer. The Two Fabrics Shall Be Adhered Together With Flexible Adhesive And Polyurethane Foam Of 5 Mm Thickness. Colour-olive Green,colour Of Sole And Toe Cap-black (for All Other Boots),blend Composition Of Polyester Viscose Fabric Water Repellent-polyester- 80% Viscose-remainder.binding Material Of Polyester Blended Fabric, Black Having Blend Composition Of Polyester-67%, Cotton -33% & Confirming To Is:15852-2009 For Colour Fastness To Light, Washing & Ph Value. In Socks- In Sock Each Boot Shall Be Provided With A Detachable 4.0 Mm + 1.0 Mm Thick Full In Sock Of Compressed Molded Rubber Having Instep Arch Support And Adequate Ribs For Grip Ad Comfort. The Outer Layer Of The Knock Hill Be Covered With Cambrelle Type Material In Black Color. Toe Cap &stiffener Well Struck Heat Activated Thermoplastic Toe Puff & Stiffeners Of Minimum Thickness 1.5 Mm & 2 Mm Respectively Shall Be Used.thread Polyester- Nil Lace Each Pair Of Boots Shall Be Provided With A Pair Of Nylon Black Laces Of Length160 +width 6 Cm. Thickness Of Sole In The Finished Condition, 1 Min. Thickness Of Sole 4mm 2. Cleat Height 2.5 Mm 3. Thickness Of Sole When Measured From Outside With Side Wall Forepart 20mm. 4.thickness Of Sole When Measured At Waist From Outside With Side Wall(mm)16, 5. Thickness Of Sole When Measured At Heel From Outside With Side Wall(mm) (min)35. 6. Mass The Mass Of One Pair Of Finished Boots Of Size 8 Shall Be 750 To 850 Gms With An Increase Or Decrease Of 50 Gms For Each Bigger Or Smaller Size Respectively. 7-marking The Outsole Of The Boot Must Be Embossed /engraved With The Manufacturers Name Or His Recognized Trade Mark, Size, Month And Year Of Manufacture.8- Packing Each Pair Of Boots Shall Be Packed In Individual Boxes To Prevent Damage., Jungle Boot;-1. Upper Shall Consist Of Polyester Viscose (pv) Fabric, Water-repellent As An Out Er Layer And 100% Non- Woven Nylon (camarilla Type) Lining As Inner Layer. The Two Fabrics Shall Be Adhered Together With Flexible Adhesive And Polyurethane Foam Of 5 Mm Thickness. Colour-olive Green,colour Of Sol E And Toe Cap-black (for All Other Boots),blend Composition Of Polyester Viscose Fabric Water Repellent-poly Ester-80% Viscose-remainder.binding Material Of Polyester Blended Fabric, Black Having Blend Composition Of Polyester-67%, Cotton -33% & Confirming To Is:15852-2009 For Colour Fastness To Light, Washing & Ph Val Ue. In Socks- In Sock Each Boot Shall Be Provided With A Detachable 4.0 Mm + 1.0 Mm Thick Full In Sock Of C Ompressed Molded Rubber Having Instep Arch Support And Adequate Ribs For Grip Ad Comfort. The Outer Laye R Of The Knock Hill Be Covered With Cambrelle Type Material In Black Color. Toe Cap &stiffener Well Struck He At Activated Thermoplastic Toe Puff & Stiffeners Of Minimum Thickness 1.5 Mm & 2 Mm Respectively Shall Be Used.thread Polyester- Nil Lace Each Pair Of Boots Shall Be Provided With A Pair Of Nylon Black Laces Of Len Gth160 +width 6 Cm. Thickness Of Sole In The Finished Condition, 1 Min. Thickness Of Sole 4mm 2. Cleat Heig Ht 2.5 Mm 3. Thickness Of Sole When Measured From Outside With Side Wall Forepart 20mm. 4.thickness Of Sole When Measured At Waist From Outside With Side Wall(mm)16, 5. Thickness Of Sole When Measured At He El From Outside With Side Wall(mm) (min)35. 6. Mass The Mass Of One Pair Of Finished Boots Of Size 8 Shall Be 750 To 850 Gms With An Increase Or Decrease Of 50 Gms For Each Bigger Or Smaller Size Respectively. 7-mark Ing The Outsole Of The Boot Must Be Embossed /engraved With The Manufacturers Name Or His Recognized Tr Ade Mark, Size, Month And Year Of Manufacture.8- Packing Each Pair Of Boots Shall Be Packed In Individual Boxes To Prevent Damage. - Warranty Period: 30 Months After The Date Of Delivery Pl Code : 799049340011 . Our senior analysts help you decode the complete project guidelines, manage accurate costing sheets, and complete error-free submissions on the official platform used by East Coast Railway ECOR.

Most online bids face rejection during the initial evaluation round due to avoidable errors like uploading blurred document scans, submitting expired DSCs, or missing critical experience papers required for Tender For Jungle Boot;-1. Upper Shall Consist Of Polyester Viscose (pv) Fabric, Water-repellent As An Outer Layer And 100% Non- Woven Nylon (camarilla Type) Lining As Inner Layer. The Two Fabrics Shall Be Adhered Together With Flexible Adhesive And Polyurethane Foam Of 5 Mm Thickness. Colour-olive Green,colour Of Sole And Toe Cap-black (for All Other Boots),blend Composition Of Polyester Viscose Fabric Water Repellent-polyester- 80% Viscose-remainder.binding Material Of Polyester Blended Fabric, Black Having Blend Composition Of Polyester-67%, Cotton -33% & Confirming To Is:15852-2009 For Colour Fastness To Light, Washing & Ph Value. In Socks- In Sock Each Boot Shall Be Provided With A Detachable 4.0 Mm + 1.0 Mm Thick Full In Sock Of Compressed Molded Rubber Having Instep Arch Support And Adequate Ribs For Grip Ad Comfort. The Outer Layer Of The Knock Hill Be Covered With Cambrelle Type Material In Black Color. Toe Cap &stiffener Well Struck Heat Activated Thermoplastic Toe Puff & Stiffeners Of Minimum Thickness 1.5 Mm & 2 Mm Respectively Shall Be Used.thread Polyester- Nil Lace Each Pair Of Boots Shall Be Provided With A Pair Of Nylon Black Laces Of Length160 +width 6 Cm. Thickness Of Sole In The Finished Condition, 1 Min. Thickness Of Sole 4mm 2. Cleat Height 2.5 Mm 3. Thickness Of Sole When Measured From Outside With Side Wall Forepart 20mm. 4.thickness Of Sole When Measured At Waist From Outside With Side Wall(mm)16, 5. Thickness Of Sole When Measured At Heel From Outside With Side Wall(mm) (min)35. 6. Mass The Mass Of One Pair Of Finished Boots Of Size 8 Shall Be 750 To 850 Gms With An Increase Or Decrease Of 50 Gms For Each Bigger Or Smaller Size Respectively. 7-marking The Outsole Of The Boot Must Be Embossed /engraved With The Manufacturers Name Or His Recognized Trade Mark, Size, Month And Year Of Manufacture.8- Packing Each Pair Of Boots Shall Be Packed In Individual Boxes To Prevent Damage., Jungle Boot;-1. Upper Shall Consist Of Polyester Viscose (pv) Fabric, Water-repellent As An Out Er Layer And 100% Non- Woven Nylon (camarilla Type) Lining As Inner Layer. The Two Fabrics Shall Be Adhered Together With Flexible Adhesive And Polyurethane Foam Of 5 Mm Thickness. Colour-olive Green,colour Of Sol E And Toe Cap-black (for All Other Boots),blend Composition Of Polyester Viscose Fabric Water Repellent-poly Ester-80% Viscose-remainder.binding Material Of Polyester Blended Fabric, Black Having Blend Composition Of Polyester-67%, Cotton -33% & Confirming To Is:15852-2009 For Colour Fastness To Light, Washing & Ph Val Ue. In Socks- In Sock Each Boot Shall Be Provided With A Detachable 4.0 Mm + 1.0 Mm Thick Full In Sock Of C Ompressed Molded Rubber Having Instep Arch Support And Adequate Ribs For Grip Ad Comfort. The Outer Laye R Of The Knock Hill Be Covered With Cambrelle Type Material In Black Color. Toe Cap &stiffener Well Struck He At Activated Thermoplastic Toe Puff & Stiffeners Of Minimum Thickness 1.5 Mm & 2 Mm Respectively Shall Be Used.thread Polyester- Nil Lace Each Pair Of Boots Shall Be Provided With A Pair Of Nylon Black Laces Of Len Gth160 +width 6 Cm. Thickness Of Sole In The Finished Condition, 1 Min. Thickness Of Sole 4mm 2. Cleat Heig Ht 2.5 Mm 3. Thickness Of Sole When Measured From Outside With Side Wall Forepart 20mm. 4.thickness Of Sole When Measured At Waist From Outside With Side Wall(mm)16, 5. Thickness Of Sole When Measured At He El From Outside With Side Wall(mm) (min)35. 6. Mass The Mass Of One Pair Of Finished Boots Of Size 8 Shall Be 750 To 850 Gms With An Increase Or Decrease Of 50 Gms For Each Bigger Or Smaller Size Respectively. 7-mark Ing The Outsole Of The Boot Must Be Embossed /engraved With The Manufacturers Name Or His Recognized Tr Ade Mark, Size, Month And Year Of Manufacture.8- Packing Each Pair Of Boots Shall Be Packed In Individual Boxes To Prevent Damage. - Warranty Period: 30 Months After The Date Of Delivery Pl Code : 799049340011 in Odisha.

Eligibility for outstation bidders depends entirely on the terms set inside the document for Tender For Jungle Boot;-1. Upper Shall Consist Of Polyester Viscose (pv) Fabric, Water-repellent As An Outer Layer And 100% Non- Woven Nylon (camarilla Type) Lining As Inner Layer. The Two Fabrics Shall Be Adhered Together With Flexible Adhesive And Polyurethane Foam Of 5 Mm Thickness. Colour-olive Green,colour Of Sole And Toe Cap-black (for All Other Boots),blend Composition Of Polyester Viscose Fabric Water Repellent-polyester- 80% Viscose-remainder.binding Material Of Polyester Blended Fabric, Black Having Blend Composition Of Polyester-67%, Cotton -33% & Confirming To Is:15852-2009 For Colour Fastness To Light, Washing & Ph Value. In Socks- In Sock Each Boot Shall Be Provided With A Detachable 4.0 Mm + 1.0 Mm Thick Full In Sock Of Compressed Molded Rubber Having Instep Arch Support And Adequate Ribs For Grip Ad Comfort. The Outer Layer Of The Knock Hill Be Covered With Cambrelle Type Material In Black Color. Toe Cap &stiffener Well Struck Heat Activated Thermoplastic Toe Puff & Stiffeners Of Minimum Thickness 1.5 Mm & 2 Mm Respectively Shall Be Used.thread Polyester- Nil Lace Each Pair Of Boots Shall Be Provided With A Pair Of Nylon Black Laces Of Length160 +width 6 Cm. Thickness Of Sole In The Finished Condition, 1 Min. Thickness Of Sole 4mm 2. Cleat Height 2.5 Mm 3. Thickness Of Sole When Measured From Outside With Side Wall Forepart 20mm. 4.thickness Of Sole When Measured At Waist From Outside With Side Wall(mm)16, 5. Thickness Of Sole When Measured At Heel From Outside With Side Wall(mm) (min)35. 6. Mass The Mass Of One Pair Of Finished Boots Of Size 8 Shall Be 750 To 850 Gms With An Increase Or Decrease Of 50 Gms For Each Bigger Or Smaller Size Respectively. 7-marking The Outsole Of The Boot Must Be Embossed /engraved With The Manufacturers Name Or His Recognized Trade Mark, Size, Month And Year Of Manufacture.8- Packing Each Pair Of Boots Shall Be Packed In Individual Boxes To Prevent Damage., Jungle Boot;-1. Upper Shall Consist Of Polyester Viscose (pv) Fabric, Water-repellent As An Out Er Layer And 100% Non- Woven Nylon (camarilla Type) Lining As Inner Layer. The Two Fabrics Shall Be Adhered Together With Flexible Adhesive And Polyurethane Foam Of 5 Mm Thickness. Colour-olive Green,colour Of Sol E And Toe Cap-black (for All Other Boots),blend Composition Of Polyester Viscose Fabric Water Repellent-poly Ester-80% Viscose-remainder.binding Material Of Polyester Blended Fabric, Black Having Blend Composition Of Polyester-67%, Cotton -33% & Confirming To Is:15852-2009 For Colour Fastness To Light, Washing & Ph Val Ue. In Socks- In Sock Each Boot Shall Be Provided With A Detachable 4.0 Mm + 1.0 Mm Thick Full In Sock Of C Ompressed Molded Rubber Having Instep Arch Support And Adequate Ribs For Grip Ad Comfort. The Outer Laye R Of The Knock Hill Be Covered With Cambrelle Type Material In Black Color. Toe Cap &stiffener Well Struck He At Activated Thermoplastic Toe Puff & Stiffeners Of Minimum Thickness 1.5 Mm & 2 Mm Respectively Shall Be Used.thread Polyester- Nil Lace Each Pair Of Boots Shall Be Provided With A Pair Of Nylon Black Laces Of Len Gth160 +width 6 Cm. Thickness Of Sole In The Finished Condition, 1 Min. Thickness Of Sole 4mm 2. Cleat Heig Ht 2.5 Mm 3. Thickness Of Sole When Measured From Outside With Side Wall Forepart 20mm. 4.thickness Of Sole When Measured At Waist From Outside With Side Wall(mm)16, 5. Thickness Of Sole When Measured At He El From Outside With Side Wall(mm) (min)35. 6. Mass The Mass Of One Pair Of Finished Boots Of Size 8 Shall Be 750 To 850 Gms With An Increase Or Decrease Of 50 Gms For Each Bigger Or Smaller Size Respectively. 7-mark Ing The Outsole Of The Boot Must Be Embossed /engraved With The Manufacturers Name Or His Recognized Tr Ade Mark, Size, Month And Year Of Manufacture.8- Packing Each Pair Of Boots Shall Be Packed In Individual Boxes To Prevent Damage. - Warranty Period: 30 Months After The Date Of Delivery Pl Code : 799049340011. While many public sector projects allow national competitive bidding, certain localized works require local offices or specific registration metrics in Bhubaneswar.

If this procurement is routed through the central marketplace, an active GeM Seller ID is mandatory to supply items. Tender18 offers complete assistance for brand cataloging, profile creation, and vendor assessment required officially by East Coast Railway ECOR

To register an eligible bid for these contracts, companies must prepare their core compliance documents. Vendors operating across Odisha must ensure they possess a valid GST registration, permanent account number (PAN), and active Class-3 Digital Signature Certificates.

This public procurement cycle is specifically looking for qualified vendors and suppliers who can provide high-quality solutions. The operational execution, delivery, and deployment of these materials must be managed locally within the Bhubaneswar region.

The estimated project cost and budget thresholds can be reviewed directly inside the tender document. Bidders can analyze these qualification files to check if their firm meets the financial capability criteria specified for Tender For Jungle Boot;-1. Upper Shall Consist Of Polyester Viscose (pv) Fabric, Water-repellent As An Outer Layer And 100% Non- Woven Nylon (camarilla Type) Lining As Inner Layer. The Two Fabrics Shall Be Adhered Together With Flexible Adhesive And Polyurethane Foam Of 5 Mm Thickness. Colour-olive Green,colour Of Sole And Toe Cap-black (for All Other Boots),blend Composition Of Polyester Viscose Fabric Water Repellent-polyester- 80% Viscose-remainder.binding Material Of Polyester Blended Fabric, Black Having Blend Composition Of Polyester-67%, Cotton -33% & Confirming To Is:15852-2009 For Colour Fastness To Light, Washing & Ph Value. In Socks- In Sock Each Boot Shall Be Provided With A Detachable 4.0 Mm + 1.0 Mm Thick Full In Sock Of Compressed Molded Rubber Having Instep Arch Support And Adequate Ribs For Grip Ad Comfort. The Outer Layer Of The Knock Hill Be Covered With Cambrelle Type Material In Black Color. Toe Cap &stiffener Well Struck Heat Activated Thermoplastic Toe Puff & Stiffeners Of Minimum Thickness 1.5 Mm & 2 Mm Respectively Shall Be Used.thread Polyester- Nil Lace Each Pair Of Boots Shall Be Provided With A Pair Of Nylon Black Laces Of Length160 +width 6 Cm. Thickness Of Sole In The Finished Condition, 1 Min. Thickness Of Sole 4mm 2. Cleat Height 2.5 Mm 3. Thickness Of Sole When Measured From Outside With Side Wall Forepart 20mm. 4.thickness Of Sole When Measured At Waist From Outside With Side Wall(mm)16, 5. Thickness Of Sole When Measured At Heel From Outside With Side Wall(mm) (min)35. 6. Mass The Mass Of One Pair Of Finished Boots Of Size 8 Shall Be 750 To 850 Gms With An Increase Or Decrease Of 50 Gms For Each Bigger Or Smaller Size Respectively. 7-marking The Outsole Of The Boot Must Be Embossed /engraved With The Manufacturers Name Or His Recognized Trade Mark, Size, Month And Year Of Manufacture.8- Packing Each Pair Of Boots Shall Be Packed In Individual Boxes To Prevent Damage., Jungle Boot;-1. Upper Shall Consist Of Polyester Viscose (pv) Fabric, Water-repellent As An Out Er Layer And 100% Non- Woven Nylon (camarilla Type) Lining As Inner Layer. The Two Fabrics Shall Be Adhered Together With Flexible Adhesive And Polyurethane Foam Of 5 Mm Thickness. Colour-olive Green,colour Of Sol E And Toe Cap-black (for All Other Boots),blend Composition Of Polyester Viscose Fabric Water Repellent-poly Ester-80% Viscose-remainder.binding Material Of Polyester Blended Fabric, Black Having Blend Composition Of Polyester-67%, Cotton -33% & Confirming To Is:15852-2009 For Colour Fastness To Light, Washing & Ph Val Ue. In Socks- In Sock Each Boot Shall Be Provided With A Detachable 4.0 Mm + 1.0 Mm Thick Full In Sock Of C Ompressed Molded Rubber Having Instep Arch Support And Adequate Ribs For Grip Ad Comfort. The Outer Laye R Of The Knock Hill Be Covered With Cambrelle Type Material In Black Color. Toe Cap &stiffener Well Struck He At Activated Thermoplastic Toe Puff & Stiffeners Of Minimum Thickness 1.5 Mm & 2 Mm Respectively Shall Be Used.thread Polyester- Nil Lace Each Pair Of Boots Shall Be Provided With A Pair Of Nylon Black Laces Of Len Gth160 +width 6 Cm. Thickness Of Sole In The Finished Condition, 1 Min. Thickness Of Sole 4mm 2. Cleat Heig Ht 2.5 Mm 3. Thickness Of Sole When Measured From Outside With Side Wall Forepart 20mm. 4.thickness Of Sole When Measured At Waist From Outside With Side Wall(mm)16, 5. Thickness Of Sole When Measured At He El From Outside With Side Wall(mm) (min)35. 6. Mass The Mass Of One Pair Of Finished Boots Of Size 8 Shall Be 750 To 850 Gms With An Increase Or Decrease Of 50 Gms For Each Bigger Or Smaller Size Respectively. 7-mark Ing The Outsole Of The Boot Must Be Embossed /engraved With The Manufacturers Name Or His Recognized Tr Ade Mark, Size, Month And Year Of Manufacture.8- Packing Each Pair Of Boots Shall Be Packed In Individual Boxes To Prevent Damage. - Warranty Period: 30 Months After The Date Of Delivery Pl Code : 799049340011 by East Coast Railway ECOR

You can download the commercial Bill of Quantities (BOQ) spreadsheet directly using the secure link provided on this page. The BOQ file contains the item descriptions and rate filling forms officially validated for Tender For Jungle Boot;-1. Upper Shall Consist Of Polyester Viscose (pv) Fabric, Water-repellent As An Outer Layer And 100% Non- Woven Nylon (camarilla Type) Lining As Inner Layer. The Two Fabrics Shall Be Adhered Together With Flexible Adhesive And Polyurethane Foam Of 5 Mm Thickness. Colour-olive Green,colour Of Sole And Toe Cap-black (for All Other Boots),blend Composition Of Polyester Viscose Fabric Water Repellent-polyester- 80% Viscose-remainder.binding Material Of Polyester Blended Fabric, Black Having Blend Composition Of Polyester-67%, Cotton -33% & Confirming To Is:15852-2009 For Colour Fastness To Light, Washing & Ph Value. In Socks- In Sock Each Boot Shall Be Provided With A Detachable 4.0 Mm + 1.0 Mm Thick Full In Sock Of Compressed Molded Rubber Having Instep Arch Support And Adequate Ribs For Grip Ad Comfort. The Outer Layer Of The Knock Hill Be Covered With Cambrelle Type Material In Black Color. Toe Cap &stiffener Well Struck Heat Activated Thermoplastic Toe Puff & Stiffeners Of Minimum Thickness 1.5 Mm & 2 Mm Respectively Shall Be Used.thread Polyester- Nil Lace Each Pair Of Boots Shall Be Provided With A Pair Of Nylon Black Laces Of Length160 +width 6 Cm. Thickness Of Sole In The Finished Condition, 1 Min. Thickness Of Sole 4mm 2. Cleat Height 2.5 Mm 3. Thickness Of Sole When Measured From Outside With Side Wall Forepart 20mm. 4.thickness Of Sole When Measured At Waist From Outside With Side Wall(mm)16, 5. Thickness Of Sole When Measured At Heel From Outside With Side Wall(mm) (min)35. 6. Mass The Mass Of One Pair Of Finished Boots Of Size 8 Shall Be 750 To 850 Gms With An Increase Or Decrease Of 50 Gms For Each Bigger Or Smaller Size Respectively. 7-marking The Outsole Of The Boot Must Be Embossed /engraved With The Manufacturers Name Or His Recognized Trade Mark, Size, Month And Year Of Manufacture.8- Packing Each Pair Of Boots Shall Be Packed In Individual Boxes To Prevent Damage., Jungle Boot;-1. Upper Shall Consist Of Polyester Viscose (pv) Fabric, Water-repellent As An Out Er Layer And 100% Non- Woven Nylon (camarilla Type) Lining As Inner Layer. The Two Fabrics Shall Be Adhered Together With Flexible Adhesive And Polyurethane Foam Of 5 Mm Thickness. Colour-olive Green,colour Of Sol E And Toe Cap-black (for All Other Boots),blend Composition Of Polyester Viscose Fabric Water Repellent-poly Ester-80% Viscose-remainder.binding Material Of Polyester Blended Fabric, Black Having Blend Composition Of Polyester-67%, Cotton -33% & Confirming To Is:15852-2009 For Colour Fastness To Light, Washing & Ph Val Ue. In Socks- In Sock Each Boot Shall Be Provided With A Detachable 4.0 Mm + 1.0 Mm Thick Full In Sock Of C Ompressed Molded Rubber Having Instep Arch Support And Adequate Ribs For Grip Ad Comfort. The Outer Laye R Of The Knock Hill Be Covered With Cambrelle Type Material In Black Color. Toe Cap &stiffener Well Struck He At Activated Thermoplastic Toe Puff & Stiffeners Of Minimum Thickness 1.5 Mm & 2 Mm Respectively Shall Be Used.thread Polyester- Nil Lace Each Pair Of Boots Shall Be Provided With A Pair Of Nylon Black Laces Of Len Gth160 +width 6 Cm. Thickness Of Sole In The Finished Condition, 1 Min. Thickness Of Sole 4mm 2. Cleat Heig Ht 2.5 Mm 3. Thickness Of Sole When Measured From Outside With Side Wall Forepart 20mm. 4.thickness Of Sole When Measured At Waist From Outside With Side Wall(mm)16, 5. Thickness Of Sole When Measured At He El From Outside With Side Wall(mm) (min)35. 6. Mass The Mass Of One Pair Of Finished Boots Of Size 8 Shall Be 750 To 850 Gms With An Increase Or Decrease Of 50 Gms For Each Bigger Or Smaller Size Respectively. 7-mark Ing The Outsole Of The Boot Must Be Embossed /engraved With The Manufacturers Name Or His Recognized Tr Ade Mark, Size, Month And Year Of Manufacture.8- Packing Each Pair Of Boots Shall Be Packed In Individual Boxes To Prevent Damage. - Warranty Period: 30 Months After The Date Of Delivery Pl Code : 799049340011 within the Odisha jurisdiction

The official timeline and deadline details for Tender For Jungle Boot;-1. Upper Shall Consist Of Polyester Viscose (pv) Fabric, Water-repellent As An Outer Layer And 100% Non- Woven Nylon (camarilla Type) Lining As Inner Layer. The Two Fabrics Shall Be Adhered Together With Flexible Adhesive And Polyurethane Foam Of 5 Mm Thickness. Colour-olive Green,colour Of Sole And Toe Cap-black (for All Other Boots),blend Composition Of Polyester Viscose Fabric Water Repellent-polyester- 80% Viscose-remainder.binding Material Of Polyester Blended Fabric, Black Having Blend Composition Of Polyester-67%, Cotton -33% & Confirming To Is:15852-2009 For Colour Fastness To Light, Washing & Ph Value. In Socks- In Sock Each Boot Shall Be Provided With A Detachable 4.0 Mm + 1.0 Mm Thick Full In Sock Of Compressed Molded Rubber Having Instep Arch Support And Adequate Ribs For Grip Ad Comfort. The Outer Layer Of The Knock Hill Be Covered With Cambrelle Type Material In Black Color. Toe Cap &stiffener Well Struck Heat Activated Thermoplastic Toe Puff & Stiffeners Of Minimum Thickness 1.5 Mm & 2 Mm Respectively Shall Be Used.thread Polyester- Nil Lace Each Pair Of Boots Shall Be Provided With A Pair Of Nylon Black Laces Of Length160 +width 6 Cm. Thickness Of Sole In The Finished Condition, 1 Min. Thickness Of Sole 4mm 2. Cleat Height 2.5 Mm 3. Thickness Of Sole When Measured From Outside With Side Wall Forepart 20mm. 4.thickness Of Sole When Measured At Waist From Outside With Side Wall(mm)16, 5. Thickness Of Sole When Measured At Heel From Outside With Side Wall(mm) (min)35. 6. Mass The Mass Of One Pair Of Finished Boots Of Size 8 Shall Be 750 To 850 Gms With An Increase Or Decrease Of 50 Gms For Each Bigger Or Smaller Size Respectively. 7-marking The Outsole Of The Boot Must Be Embossed /engraved With The Manufacturers Name Or His Recognized Trade Mark, Size, Month And Year Of Manufacture.8- Packing Each Pair Of Boots Shall Be Packed In Individual Boxes To Prevent Damage., Jungle Boot;-1. Upper Shall Consist Of Polyester Viscose (pv) Fabric, Water-repellent As An Out Er Layer And 100% Non- Woven Nylon (camarilla Type) Lining As Inner Layer. The Two Fabrics Shall Be Adhered Together With Flexible Adhesive And Polyurethane Foam Of 5 Mm Thickness. Colour-olive Green,colour Of Sol E And Toe Cap-black (for All Other Boots),blend Composition Of Polyester Viscose Fabric Water Repellent-poly Ester-80% Viscose-remainder.binding Material Of Polyester Blended Fabric, Black Having Blend Composition Of Polyester-67%, Cotton -33% & Confirming To Is:15852-2009 For Colour Fastness To Light, Washing & Ph Val Ue. In Socks- In Sock Each Boot Shall Be Provided With A Detachable 4.0 Mm + 1.0 Mm Thick Full In Sock Of C Ompressed Molded Rubber Having Instep Arch Support And Adequate Ribs For Grip Ad Comfort. The Outer Laye R Of The Knock Hill Be Covered With Cambrelle Type Material In Black Color. Toe Cap &stiffener Well Struck He At Activated Thermoplastic Toe Puff & Stiffeners Of Minimum Thickness 1.5 Mm & 2 Mm Respectively Shall Be Used.thread Polyester- Nil Lace Each Pair Of Boots Shall Be Provided With A Pair Of Nylon Black Laces Of Len Gth160 +width 6 Cm. Thickness Of Sole In The Finished Condition, 1 Min. Thickness Of Sole 4mm 2. Cleat Heig Ht 2.5 Mm 3. Thickness Of Sole When Measured From Outside With Side Wall Forepart 20mm. 4.thickness Of Sole When Measured At Waist From Outside With Side Wall(mm)16, 5. Thickness Of Sole When Measured At He El From Outside With Side Wall(mm) (min)35. 6. Mass The Mass Of One Pair Of Finished Boots Of Size 8 Shall Be 750 To 850 Gms With An Increase Or Decrease Of 50 Gms For Each Bigger Or Smaller Size Respectively. 7-mark Ing The Outsole Of The Boot Must Be Embossed /engraved With The Manufacturers Name Or His Recognized Tr Ade Mark, Size, Month And Year Of Manufacture.8- Packing Each Pair Of Boots Shall Be Packed In Individual Boxes To Prevent Damage. - Warranty Period: 30 Months After The Date Of Delivery Pl Code : 799049340011 are available inside the detailed notification files. Bidders planning to target this contract in Bhubaneswar should check the official portal schedule early to complete their online technical and financial submission well before the closing hours.