sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

6Latest Wire mesh shutter repair Tenders List

Latest Wire mesh shutter repair Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Wire mesh shutter repair tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Wire mesh shutter repair tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Wire mesh shutter repair Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Wire mesh shutter repair tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Wire mesh shutter repair Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Wire mesh shutter repair Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Wire mesh shutter repair Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Wire mesh shutter repair tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Wire mesh shutter repair Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Wire mesh shutter repair sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Wire mesh shutter repair tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Wire mesh shutter repair tenders.

Is EMD mandatory for all Wire mesh shutter repair tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Wire mesh shutter repair work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Wire mesh shutter repair tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Wire mesh shutter repair Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16682055
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
tender for billing of quantity bib tap cast copper alloy brass 15mmdia, bathroom hand shower stainless steel of thickness point nine mm, seat cover plastic white for evc with hinges, decorative rod 20 or 25mm dia x 3 mtr, pvc connection 450 mm long with brass nuts, 600 mm connection pipe with nuts, stop valve cast copper 15 mm dia, bib cock cp 15 mm dia with flange, pvc low level flushing cistern with complete accessories 10 litre capacity, pvc mirror cabinet of size n exc 450mm in width n exc 550 mm in length 100mm thick with suitable pvc dooe shutter and 5mm thick front looking, cp grating 100 mm dia isi marked m, decorative brackets for drapery rods, cp jet spray 450mm long for 15mm dia, cp health foucet with 1mm flexible tube, shower rose cp 125 mm, angle cock cp 15 mm dia with flange, pillar cock cp medium weight fancy type of 15 mm, floor door stopper of aluminium 140 mm, aluminium anodised curtain rod 20mm dia 3 mtr long, cp grating 125 mm isi marked, waste coupling 40 mm cp for stainless steel kitchen sink, pvc waste pipe for urinal 32 mm dia, aluminium anodised bow handle 150 mm long, aluminium anodised tower bolt 200mm, aluminium anodised tower bolt 150mm, aluminium bracket 20mm curtain rod tubing t and l type, ci bracket for wash hand basin, hydraulic door closer brass type, nails wire 1inch, nails wire one and half inch, nails two inch, nails two and half inch, nails 3 inch, pannel pin 20 mm, ss plate rack 24inch x 30 inch, ss plate rack 30 inch x36 inch, cp nipple 1 inch, cp nipple one and half inch, cp nipple two inch, self screw 1 inch, self screw one and half inch, self screw 2 inch, self screw 4 inch, splindle for concealed stop cock, splindle for bib cock, sink coupling 4 inch, waste pipe for sink 32mm, waste pipe for hand wash basin, cp sink cock, ss overhead shower, cp long body bib tap, bib cock 2 in 1, two way bib cock 15mm, angle cp cock 2 in 1, butt hings ms 100mm, aluminium anodised aldrop bolt 300mm, hasp and staple 100 mm, alloy butt hings 100mm, tephlon tape, sink coupling 32 mm, looking mirror 24x16 inch, looking mirror 24x24 inch, ss jet spray with 1 mtr tube, soap dish, toilet paper holder with flap, tower rack 24 inch, towel ring round type, cp or ss grating 100 round, cp or ss grating 150 or 125 mm round, cp or ss grating with hole 100 round, cp or ss grating with hole 150 or 125mm round, glass shelf corner, glass shelf 15 or 18 inch long, cp extension nipple length 1 inch size half inch, cp extension nipple length one inch size half inch, cp or brass shower rose 75 mm or 100 mm, cp or brass shower rose 100 mm or 150mm, wall grip 8 nos, wall grip 10 nos, crack seal paint 360 grm, cpvc fitting tee 1, cpvc fitting tee 3 or 4, cpvc fitting elbow 1, cpvc fitting elbow 3 or 4, cpvc fitting socket 1, cpvc fitting socket 3 or 4, cpvc fitting union socket 1, cpvc fitting union socket 3 or 4, cpvc fitting brass tee 1, cpvc fitting brass tee 3 or 4, cpvc fitting brass elbow 3 or 4, cpvc fitting brass elbow 1, cpvc fitting mta 1, cpvc fitting mta 3 or 4, cpvc fitting fta 1, cpvc fitting fta 3 or 4, cpvc fitting tank connector 1, cpvc fitting bll value 1, pvc insulation tape, shower rose cp 125 mm suitable for dia 15 mm gi pipe, aluminium wire mesh 3 feet, aluminium wire mesh 4 feet, aluminium door pad locks, floor spring, snake guard 4 feet long, door stopper 140 mm make, door stopper 140 mm brass coated moduler, sliding bolt 150mm, sliding bolt 200mm, door hings 75mm, door hings 100mm, door hings 150mm, tower bolt 75mm, tower bolt 100mm, tower bolt 150mm, tower bolt 200mm, curtain rods 3.60 mtr lenght 25mm dia, curtain brackets normal, door bandle aluminium 150mm, pvc acrylic sheet size 8 feet x 5mm, aluminium window handle right or left, cp wall mixture, cp sink mixture, cement bag 50 kg, river sand, pcc salid block 300 x 200 x 200, solvent cement, silicon with gun, water proofing top, synthetic enamel paint, measuring tap 30 meter long, measuring tap 5 meter long, pvc bends 110 mm, pvc pipe 110 mm, pvc pipe 75 mm, eco board false ceiling 600 x 600 mm, knob drawer 25 mm brass, fevicol special repair 098, self taping 35 mm isi marked, self taping 35 mm 25 mm isi marked, french polish in 1 ltr pack, hinges 75mm, thinner, synthetic enamel paint black colour first quality in 1 ltr pack, sand paper no 100, tapping screw wood 20mm, nail 2 inch, varnish in 1 litre container, touch wood paint 1 litre container, sand paper no 80, nails wire 1 inch, nails wire 1 and half inch, nails wire 2 and half inch, nails wire 3 inch, sand paper no 60, synthetic enamel paint white colour first quality in 1 ltr pack, sand paper no 200, sand paper no 40, cp knob 40mm, paint brush 25 mm, plywood 2400 x 1200 x 12 mm bwr, plywood 2400 x 1200 x 6 mm bwr, timber beeding 200 mm x 15 mm, pannel pin 20 mm, plywood 4mmx 8 ft x 4ft x 4mm one side teak face, paint brush 75 mm, pre laminated particle board 8ft x 4ft x18 or 19mm exterior grade, pre laminated particle board 8ft x4ft x9 mm exterior grade, grinder paper 5 inch, blade wood cutter 4 inch, haxo blade both side, slip taper file, wall gits 5mm, wooden gits 5mm pack of 100, driver bit 65mm, hook for hanging hat cloth, cushion for sofa 21 inch x 22 inch x 4mm density 40 with cover of tapestry cloth not stched one side
Agency / Dept :
indian army
Due Date :
Aug 27, 2026
Tender Value :
54.45L
View Documents
T18 Ref No : 16760432
Location : gurdaspur , punjab
Source : GEM Tenders
tender for ceramic ( vitreous china ) flushing cisterns for water closets and urinals conforming to is 774 (q3) , bathroom water shower (v2) (q3) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , stainless steel shelf rack (q3) , bathroom or toilet mirror (v3) (q4) , connector pipes for washbasins/ sinks/ geyser (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , rotational moulded polyethylene water storage tanks (v3) conforming to is 12701 (q3) , copper alloy gate valve for waterworks purpose (v2) conforming to is 778 (q3) , flexible drain hoses for wash basins/ sinks (q3) , soap dish - case (q4) , towel rail (q3) , stainless steel sinks for domestic purposes (v3) as per is 13983 (q2) , floor drain traps (v2) (q3) , towel ring (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , ball valves ptmt with epobyy coated aluminum rod suitable for 20mm bore pipe , corner glass shelf 30cm by 30cm with design cp ralling , door closer hydrolically regulated 61 to 80 kgs , glass shelf rectangular type with cp brass railing 450mm long , ball valves ptmt suitable for 15mm bore pipe , patch mate for road repair of 50 kgs packing , pvc internal kit for 10 ltr pvc flushing cistern , vitreous china wash basin white flat back size 550 by 400 mm , lock mortice 65 mm for doors , aluminium door stopper alloy body , gi union 15mm , pvc water tank cover for 1000 ltr tank , brass spindle half round for cp bib cock 15mm bore , gi union 20mm , cp brass phase head for bib cock pillar cock and concealed stopcock , brass spindle for cp pillar cock 15mm bore , gi socket 20mm , aluminium alloy handles fabricated type anodised 125 mm long , mild steel sliding bolts 300 mm long , mild steel helical door springs including roller and roller plate , gi socket 15mm , mild steel barrel tower bolt 150 mm long , pvc water tank cover for 500 ltr , aluminium anodised barrel tower bolts 150 mm long , cp push cock 15 mm , gi elbow 15 mm , oil putty , mild steel sliding bolts 250 mm long , gi reducer elbow 20 mm by 15mm , brass spindle half round for cp concealed stop cock 15mm bore , mild steel pressed handles oval shape stove enamelled black 150 mm long , galvanised wire mesh 0 56 mm nominal dia apreture 1 18 mm , gi elbow 20 mm , gi nipple 20mm by 125 mm , stainless steel wire mesh 0 56 mm dia of aperture 1 18 mm , gi tee 15 mm , gi nipple 20mm by 150 mm , gi tank nipple 20 mm , plywood commercial 8feetby4feet by 19 mm thick grade bwr , gi nipple 15mm by 100 mm , gi nipple 15mm by 150 mm , plywood commercial 8feetby4feet by12 mm thick grade bwr , gi nipple 20mm by 100 mm , aluminium alloy anodised sliding door bolt with 250 mm long , curtain rod ss pipe 25 mm bore , gi nipple 15mm by 125 mm , gi tank nipple 15 mm , gi nipple 20 mm by 50 mm , gi nipple 20mm by 75mm , gi nipple 15mm by 50mm , curtain railmild steelchromium plated 20 mm dia bore , mild steel barrel tower bolt 200 mm long , gi nipple 15mm by 75mm , teflon tape roll plumbing , gi pipe 20 mm dia medium grade isi mark , mild steel mortice lock vertical type 2 levers 75 mm long , mild steel wire nails with head 20mm , brass spinlde for concealed stop cock , pvc bend pipe for superflow of flushing cistern , butt hinges medium weight cold rolled mild steel 75 mm long , washer for syphone sets internal or ebyternal dia of washer , butt hinges medium weight cold rolled mild steel 100 mm long , sheet glass oridinary quality 4 mm thick 4feet by4feet , heby nipple 15 mm , plywood commercial 8feetby4feet by 9 mm thick grade bwr , gi pipe 15 mm dia medium grade isi mark , gi plug 20mm , vitrous china water closet seat ewc white , door seal with nylon brush snake guard 1mtr width , butt hinges medium weight cold rolled mild steel 50 mm long , aluminium alloy handles fabricated type anodised 150 mm long , plywood commercial 8feetby4feet by 4 mm thick grade bwr , gi plug 15mm , plywood commercial 8feetby4feet by 6 mm thick grade bwr , mild steel cp coated hasp and staple 100 mm long , mild steel wire nails with head for wiremesh black size n ebyc 50mm , tower bolt 125 mm long , thread roll good quality , mild steel cp coated hasp and staple 75 mm long , statinless steel designer end laatu curtain rod 25mm dia , m seal liquid , mild steel wire nails with head for wiremesh black size n ebyc 100mm , statinless steel holder for curtain rod 25mm dia , aluminium anodised barrel tower bolts of ebytruded section 200 mm long , statinless steel bracket for curtain rod 25mm dia , sheet glass oridinary quality 5 mm thick 4feet by4feet , white cement , plastic designer end laatu, ball valves high pressureof ptmt with epobyy coated aluminum rod and high density plastic ball screwed for iron pipe or brass ferrule suitable for 20mm bore pipe, corner glass shelf 30cm by30cm with design cp ralling, door closer hydrolically regulated designation no 3 universal type suitable for door shutter 851 to 1000 mm width and of weight between 61 to 80 kgs, glass shelf rectangular type with cp brass railing 450mm long, ball valves high pressureof ptmt with epobyy coated aluminum rod and high density plastic ball screwed for iron pipe or brass ferrule suitable for 15mm bore pipe, patch mate for road repair of 50 kgs packing, pvc internal kit for 10 ltr pvc flushing cistern, vitreous china wash basin white flat back size 550 by 400 mm including brackets, lock mortice 65 mm for doors, aluminium door stopper alloy body, gi union 15mm, pvc water tank cover for 1000 ltr tank, brass spindle half round for cp bib cock 15mm bore, gi union 20mm, cp brass phase head for bib cock pillar cock and concealed stopcock, brass spindle for cp pillar cock 15mm bore, gi socket 20mm, aluminium alloy handles fabricated type anodised 125 mm long isi marked, mild steel sliding bolts 300 mm long plate type stove enamelled black with bright bolt not less than 12 mm dia, mild steel helical door springs including roller and roller plate, gi socket 15mm, mild steel barrel tower bolt 150 mm long, pvc water tank cover for 500 ltr, aluminium anodised barrel tower bolts of ebytruded section 150 mm long, cp push cock 15 mm, gi elbow 15 mm, oil putty, mild steel sliding bolts 250 mm long plate type stove enamelled black with bright bolt not less than 12 mm dia, gi reducer elbow 20 mm by 15mm, brass spindle half round for cp concealed stop cock 15mm bore, mild steel pressed handles oval shape stove enamelled black 150 mm long, galvanised wire cloth mesh 0 point 56 mm nominal dia of wire and average width of apreture 1 point 18 mm, gi elbow 20 mm, gi nipple 20mm by 125 mm, stainless steel wire cloth mesh 0 point 56 mm nominal dia o wire and average width of aperture 1 point 18 mm, gi tee 15 mm, gi nipple 20mm by 150 mm, gi tank nipple 20 mm, plywood commercial 8feetby4feet by 19 mm thick grade bwr, gi nipple 15mm by 100 mm, gi nipple 15mm by 150 mm, plywood commercial 8feetby4feet by12 mm thick grade bwr, gi nipple 20mm by 100 mm, aluminium alloy anodised sliding door bolt with hasp staple bolt type 250 mm long, curtain rod ss pipe 25 mm bore, gi nipple 15mm by 125 mm, gi tank nipple 15 mm, gi nipple 20 mm by 50 mm, gi nipple 20mm by 75mm, gi nipple 15mm by 50mm, curtain railmild steelchromium plated 20 mm dia bore, mild steel barrel tower bolt 200 mm long, gi nipple 15mm by 75mm, teflon tape roll plumbing, gi pipe 20 mm dia medium grade isi mark, mild steel mortice lock vertical type 2 levers 75 mm long with two set of keys and escutcheon plates, mild steel wire nails with head for wiremesh black size 20mm, brass spinlde for concealed stop cock, pvc bend pipe for superflow of flushing cistern, butt hinges medium weight cold rolled mild steel 75 mm long, washer for syphone sets internal or ebyternal dia of washer, butt hinges medium weight cold rolled mild steel 100 mm long, sheet glass oridinary quality 4 mm thick 4feet by4feet, heby nipple 15 mm, plywood commercial 8feetby4feet by 9 mm thick grade bwr, gi pipe 15 mm dia medium grade isi mark, gi plug 20mm, vitrous china water closet seat ewc white, door seal with nylon brush snake guard at lower side to fit at the bottom of door shutter upto 1mtr width, butt hinges medium weight cold rolled mild steel 50 mm long, aluminium alloy handles fabricated type anodised 150 mm long, plywood commercial 8feetby4feet by 4 mm thick grade bwr, gi plug 15mm, plywood commercial 8feetby4feet by 6 mm thick grade bwr, mild steel cp coated hasp and staple 100 mm long, mild steel wire nails with head for wiremesh black size n ebyc 50mm, tower bolt 125 mm long, thread roll good quality, mild steel cp coated hasp and staple 75 mm long, statinless steel designer end laatu curtain rod 25mm dia, m seal liquid, mild steel wire nails with head for wiremesh black size n ebyc 100mm, statinless steel holder for curtain rod 25mm dia, aluminium anodised barrel tower bolts of ebytruded section 200 mm long, statinless steel bracket for curtain rod 25mm dia, sheet glass oridinary quality 5 mm thick 4feet by4feet, white cement, plastic designer end laatu curtain rod 25mm dia
Agency / Dept :
indian army
Due Date :
Aug 22, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 17135502
Location : sriperumbudur , tamil nadu
corrigendum tender for miscellaneous works at rgniyd, sriperumbudur during 2026-27. sh i: renovation of first floor toilets in old boys (14 nos) and girls hostel(14 nos) and special repairs to 16 nos shafts, including replacement of ci pipes with pvc swr pipes and gi pipes sh ii: providing of ss mosquito proof wire mesh shutter for 80 nos boys hostel & girls hostel rooms, providing aluminium mesh shutter for balcony grills and replacing of floor tiles in common toilet and laying of wall tiles in washing platforms area.
Agency / Dept :
central public works department CPWD
Due Date :
Sep 09, 2026
Tender Value :
71.89L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17071359
Location : bangalore , karnataka
Source : GEM Tenders
corrigendum tender for removal of existing bituminous concrete layer , removal of existing synthetic astro turf surface , providing and laying bituminous concrete as per fih guidelines , removing and refixing of existing drain cover after relaying of hockey turf , earth work in excavation by mechanical or manual means in trenches or drains , providing and laying in position cement concrete of aggregate 40 mm , providing and laying in position cement concrete of aggregate 20 mm , steel work welded in built up sections or framed work , applying priming coat with ready mixed red oxide zinc chromate primer , painting with synthetic enamel paint , providing and fixing gi chain link fabric fencing of required width , supply and installation of fully computerized automatic and single key operation , supply, installation, testing and commissioning of 500 w led flood lights , supply, installation, testing and commissioning feeder pillar control panel , supply and installation of fih approved synthetic turf of green colour , supply installation testing and commissioning of dug out min 10 seating cap , supply and fixing of aluminium goal post for hockey , vendor to provide fih certification for global category , transportation charges of materials both removal and installation till site, re laying of existing astro turf hockey ground, removal of the existing bituminous concrete layer by milling machine to correct the ground gradient as per latest fih guidelines and removal of unserviceable materials from the site as per direction of tech rep or project officer including all costs loading and unloading carriage by mechanical means etc complete please refer to specification attached at appendix a ser no 1, removal of the existing synthetic hockey surface with rubber shock pad and disposal of the old unserviceable synthetic material including all costs loading and unloading carriage by mechanical means etc complete please refer to specification attached at appendix a ser no 2, providing and laying bituminous concrete strictly as per fih guidelines under the supervision of turf manufacturer representative or engineer using crushed stone aggregates of specified grading premixed with bituminous binder and filler transporting the hot mix to work site by tippers laying with paver finisher equipped with electronic sensor to the required grade alignment and level by special lazer equipment and rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction and density as per specification complete and as per the direction of tech rep or project officer 50 mm compacted thickness with bitumen of grade vg 30 at the rate 5 point 5 percent by weight of total mix and lime filler at the rate of 3 percent by weight of aggregate prepared in batch type hot mix plant of 100 to 120 tph capacity please refer to specification attached at appendix a ser no 3, removing of existing drain cover and refixing after relaying of hockey turf including cleaning and minor repair work of drainage system as per direction of tech rep or project officer 12 mm cement plaster of mix 1 ratio 4 with 1 cement ratio 4 fine sand please refer to specification attached at appendix a ser no 4, earth work in excavation by mechanical means hydraulic excavator or manual means in foundation trenches or drains not exceeding 1 point 5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto to 1 point 5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m all kinds of soil please refer to specification attached at appendix a ser no 5, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level 1 ratio 4 ratio 8 with 1 cement ratio 4 coarse sand ratio 8 graded stone aggregate 40 mm nominal size please refer to specification attached at appendix a ser no 6, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level 1 ratio 2 ratio 4 with 1 cement ratio 2 coarse sand ratio 4 graded stone aggregate 20 mm nominal size please refer to specification attached at appendix a ser no 7, steel work welded in built up sections or framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc as required in grating frames guard bar ladder railings brackets gates and similar works please refer to specification attached at appendix a ser no 8, applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron or steel works please refer to specification attached at appendix a ser no 9, painting with synthetic enamel paint of approved brand and manufacture to give an even shade with two or more coats on new work please refer to specification attached at appendix a ser no 10, providing and fixing gi chain link fabric fencing of required width in mesh size 50 mm x 50 mm with height upto 6 m behind the goal posts and 2 point 5 m along the sides including strengthening with 2 mm dia wire or nuts bolts and washers as required complete as per the direction of tech rep or project officer made of gi wire of dia 4 mm please refer to specification attached at appendix a ser no 11, supply and installation of fully computerized automatic and single key operation with 6 pop up sprinkler system having a radius of 41 m at 6 bar pressure discharge of water specifically designed for synthetic sports hockey surface including all their fittings and accessories including earth work in excavation and re filling hdpe pipe dia 150 or 110 mm class pe 100 grade 12 point 50 kg per sqm minimum including all charges etc complete please refer to specification attached at appendix a ser no 12, supply installation testing and commissioning of 500 watts led flood lights wipro or bajaj or crompton or any equivalent brand with 12 lights x 4 nos on existing poles all as complete as required to fix lights on these poles please refer to specification attached at appendix a ser no 13, supply installation testing and commissioning of feeder pillar time control panel 3 ph with 16 amps mcb and amp power contactor installation of 12 light fixtures interlink connection cable for lights up to control panel please refer to specification attached at appendix a ser no 14, supply and installation of fih approved global category synthetic turf of pile height 13 mm alongwith cast in situ shock pad of minimum 15 mm thickness on prepared bituminous surface maintaining international hockey federation fih specification including all marking on the surface complete as per the instruction of tech rep or project officer the work shall be executed by an fih certified field builder and colour of the turf will be green please refer to specification attached at appendix a ser no 15, supply installation testing and commissioning of dug out with minimum 10 seating capacity of ss 304 and covering with polycarbonate sheets of approved shade with special turf wheels for movements etc as per directions of tech rep or project officer please refer to specification attached at appendix a ser no 16, supplying and fixing of aluminium goal post for hockey as per drawing design and specifications approved by fih including all fittings and net etc all complete as per direction of the tech rep or project officer please refer to specification attached at appendix a ser no 17, vendor to provide fih certification for global category for the project after completion of all wks please refer to specification attached at appendix a ser no 18 payment will be released after confirmation is received from fih certification authority, transportation charges of materials till site for deliveries and removal of debris from site out side the cantt premises please refer to specification attached at appendix a ser no 19
Agency / Dept :
indian army
Due Date :
Sep 05, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 17060290
Location : chennai , tamil nadu
tender for miscellaneous works at rgniyd, sriperumbudur during 2026-27. sh i: renovation of first floor toilets in old boys (14 nos) and girls hostel(14 nos) and special repairs to 16 nos shafts, including replacement of ci pipes with pvc swr pipes and gi pipes sh ii: providing of ss mosquito proof wire mesh shutter for 80 nos boys hostel & girls hostel rooms, providing aluminium mesh shutter for balcony grills and replacing of floor tiles in common toilet and laying of wall tiles in washing platforms area.
Agency / Dept :
central public works department CPWD
Due Date :
Sep 09, 2026
Tender Value :
71.89L
View Documents
T18 Ref No : 17460362
Location : bareilly , uttar pradesh
Source : GEM Tenders
tender for gate valve - grade of size 20mm x15mm , gi nipple 15mm x100mm long , gi nipple 20mmx75mm long , gi nipple 15mmx 75mm long , gi nipple 15mmx150mm long , gi nipple 15mmx200mm long , gi nipple 15mmx300mm long , gi nipple 20mmx100mm long , gi nipple 20mmx150mm long , gi pipe 15mm medium grade of 6 mtr length , gi pipe 20mm medium grade of 6 mtr length , gi pipe clamp 15mm , gi socket 15mm medium grade , gi socket 20mm medium grade , gi socket reducer 20 x 15mm medium grade , gi tee 15mm medium grade , gi tee 20mm medium grade , gi union socket 15mm medium grade , gi union socket 20mm medium grade , glass putty , glass self 600mm long , glass sheet 4 feet x3 feet x3mm , handle soft pu for chair revolving , lookig mirror of size 450 x 600 x 5 mm thick , looking mirror of size 375x1200mmx5mm thick , looking mirror of size 375x750mm x 5mm thick , looking mirror of size 450mmx1500mm x 5mm thick , machine screw full thread 15mm , ms nails 1inch no 17 , ms nails 0.5 inch no 17 , ms nails 0.5 inch no 20 , ms nails 2 inch , ms nails 3 inch , ms nails 0.75 inch no 20 , ms nails 4 inch , plastic wall plug of 32mm size and 100pc of beads , plywood grade bwr type of size 8 feet x4 feetx 6 mm thk , plywood grade bwr type of size 7 feet x 3 feet x12mm , plywood grade bwr type 8 feet x4 feetx 12mm thk , plywood grade bwr type 8 feet x4 feet x4 mm thk , plywood grade bwr or comm. type thickness 8 feet x4 feet x18mm , ptmt angle stop cock 15mm , ptmt bathroom shower 15mm , ptmt bib cock 15mm , ptmt bib cock long body 15 mm , ptmt pillar tap 15mm , ptmt stop cock 15mm external thread , pvc flushing cistern flushing kit for internal fitting , pvc beading 20 x 2mm , pvc connection 450mm long with ptmt check nut 15mm , pvc connection 600mm long with ptmt nuts 15mm , pvc float valve 15mm , pvc float valve 20mm , pvc flushing cistern cap 10 ltr , pvc knob for drawer , pvc pipe plug 15mm , pvc seat back for chair verandah 455x455 , pvc seat cover complete for wc white colour , pvc seat for chair dining , pvc seat for chair verandah 455mmx455mm , pvc waste pipe 32x800mm , s s cotton plumbing thread , s s handle d shape 50mm , screw wood steel 20 mm 100 nos pkt , screw wood steel 25 mm 100 nos pkt , screw wood steel 35 mm 100 nos pkt , screw wood steel 40 mm 100 nos pkt , screw wood steel 50 mm 100 nos pkt , screw wood steel 75 mm 100 nos pkt , ss butt hinges 100mm long , ss butt hinges 150mm long , ss hinges 40mm , ss hinges 75mm , ss kitchen sink draining board 37inch x18 inch x8 inch , stainless steel plate rack 30 inch x30 inch x10 inch , sunmica 8 feet x4 feet x1mm or 0.8mm , synthetic enamel paint black color 4 ltr pack , synthetic enamel paint gray color 4 ltr pack , synthetic enamel paint olive green color 4 ltr pack , synthetic enamel paint white color 4 ltr pack , synthetic enamel paint white primer 4 ltr pack , tank nipple 15mm , teak wood beading 20x4mm , telescopic channel heavy duty 12 inch long , telescopic channel heavy duty 18 inch long , thinner 1 ltr container , touch wood 1 ltr pack , turpentine oil 5 ltr pack , twin castor wheel for chair revolving of size 50mm dia set of 05 pc , two holes brass lock for almirah , urinal pot , water sealing teflon tape , wooden screw 15mm , cp brass, aluminium door handle 100mm, aluminium door handle 125mm, aluminium door handle 150mm, aluminium door sliding bolt wiith haps 200mm long, aluminium door stopper, aluminium hasp and staple 3 inch, aluminium hasp and staple 4 inch, aluminium peg 75mm, aluminium peg 100mm, aluminium sheet of 22 guage and 3 inch wide, aluminium tower bolts 150mm, aluminium tower bolts 100mm, aluminium tower bolts 200mm, brush paint 25mm, brush paint 50mm, brush paint 75mm, cabinet mirror with shelves pvc of size 350mmx450mm, cane 2mm wide half round, cane 3mm wide half round, ceramic ewc toilet seat, ceramic indian commode or toilet seat orissa pan, ceramic wash hand basin 550x400, cloth marking of size 1 mtr width, cp bottle trape 32 mm, cp bib tap 15 mm long body, cp hand shower tube and hook with 100 mm long pipe, cp health faucet 15mmx1.5 mtr pipe, cp jet spray for europian wc, cp pillar tap mixture for hot and cool, cp shower rose with swell type 80mm for 15mm pipe, cp towel rail 600 x 20 mm, cp wall mixture with telephonic shower arrangement or bend of 15mm, curtain rod 12 ft long 20mm dia, curtain rod brackets 25mm dia, curtain rod glove 20mm dia, cushion for sofa set of size 21inch x22inch x4 inch thick well stitched, door closer aluminium for door shutter of weight 61 to 80 kg, door seal 1mtr long, fevicol sh, fevicol special repair , gi mild steel wire mesh 0.50 nominal dia 1.18mm and 1.2 mtr wide, gi elbow medium grade 15 mm dia isi marked, gi elbow medium grade 20 mm dia isi marked, gi elbow reducing medium grade of size 20mm x15mm, gi nipple 15mm x100mm long, gi nipple 20mmx75mm long, gi nipple 15mmx 75mm long, gi nipple 15mmx150mm long, gi nipple 15mmx200mm long, gi nipple 15mmx300mm long, gi nipple 20mmx100mm long, gi nipple 20mmx150mm long, gi pipe 15mm medium grade of 6 mtr length, gi pipe 20mm medium grade of 6 mtr length, gi pipe clamp 15mm, gi socket 15mm medium grade, gi socket 20mm medium grade, gi socket reducer 20 x 15mm medium grade, gi tee 15mm medium grade, gi tee 20mm medium grade, gi union socket 15mm medium grade, gi union socket 20mm medium grade, glass putty, glass self 600mm long, glass sheet 4 feet x3 feet x3mm, handle soft pu for chair revolving, lookig mirror of size 450 x 600 x 5 mm thick, looking mirror of size 375x1200mmx5mm thick, looking mirror of size 375x750mm x 5mm thick, looking mirror of size 450mmx1500mm x 5mm thick, machine screw full thread 15mm, ms nails 1inch no 17, ms nails 0.5 inch no 17, ms nails 0.5 inch no 20, ms nails 2 inch, ms nails 3 inch, ms nails 0.75 inch no 20, ms nails 4 inch, plastic wall plug of 32mm size and 100pc of beads, plywood grade bwr type of size 8 feet x4 feetx 6 mm thk, plywood grade bwr type of size 7 feet x 3 feet x12mm, plywood grade bwr type 8 feet x4 feetx 12mm thk, plywood grade bwr type 8 feet x4 feet x4 mm thk, plywood grade bwr or comm. type thickness 8 feet x4 feet x18mm, ptmt angle stop cock 15mm, ptmt bathroom shower 15mm, ptmt bib cock 15mm, ptmt bib cock long body 15 mm, ptmt pillar tap 15mm, ptmt stop cock 15mm external thread, pvc flushing cistern flushing kit for internal fitting, pvc beading 20 x 2mm, pvc connection 450mm long with ptmt check nut 15mm, pvc connection 600mm long with ptmt nuts 15mm, pvc float valve 15mm, pvc float valve 20mm, pvc flushing cistern cap 10 ltr, pvc knob for drawer, pvc pipe plug 15mm, pvc seat back for chair verandah 455x455, pvc seat cover complete for wc white colour, pvc seat for chair dining, pvc seat for chair verandah 455mmx455mm, pvc waste pipe 32x800mm, s s cotton plumbing thread, s s handle d shape 50mm, screw wood steel 20 mm 100 nos pkt, screw wood steel 25 mm 100 nos pkt, screw wood steel 35 mm 100 nos pkt, screw wood steel 40 mm 100 nos pkt, screw wood steel 50 mm 100 nos pkt, screw wood steel 75 mm 100 nos pkt, ss butt hinges 100mm long, ss butt hinges 150mm long, ss hinges 40mm, ss hinges 75mm, ss kitchen sink draining board 37inch x18 inch x8 inch, stainless steel plate rack 30 inch x30 inch x10 inch, sunmica 8 feet x4 feet x1mm or 0.8mm, synthetic enamel paint black color 4 ltr pack, synthetic enamel paint gray color 4 ltr pack, synthetic enamel paint olive green color 4 ltr pack, synthetic enamel paint white color 4 ltr pack, synthetic enamel paint white primer 4 ltr pack, tank nipple 15mm, teak wood beading 20x4mm, telescopic channel heavy duty 12 inch long, telescopic channel heavy duty 18 inch long, thinner 1 ltr container, touch wood 1 ltr pack, turpentine oil 5 ltr pack, twin castor wheel for chair revolving of size 50mm dia set of 05 pc, two holes brass lock for almirah, urinal pot, water sealing teflon tape, wooden screw 15mm, cp brass pillar tap 15mm fancy type
Agency / Dept :
indian army
Due Date :
Oct 03, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Wire Mesh Shutter Repair. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Wire Mesh Shutter Repair sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Wire Mesh Shutter Repair Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Wire Mesh Shutter Repair, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Wire Mesh Shutter Repair Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Wire Mesh Shutter Repair Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Wire Mesh Shutter Repair.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Wire Mesh Shutter Repair depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Wire Mesh Shutter Repair Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Wire Mesh Shutter Repair bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Wire Mesh Shutter Repair. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Wire Mesh Shutter Repair, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Wire Mesh Shutter Repair, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Wire Mesh Shutter Repair?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Wire Mesh Shutter Repair tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Wire Mesh Shutter Repair?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Wire Mesh Shutter Repair, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Wire Mesh Shutter Repair is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All