sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

57Latest Wedge connectors Tenders List

Latest Wedge connectors Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Wedge connectors tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Wedge connectors tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Wedge connectors Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Wedge connectors tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Wedge connectors Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Wedge connectors Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Wedge connectors Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Wedge connectors tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Wedge connectors Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Wedge connectors sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Wedge connectors tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Wedge connectors tenders.

Is EMD mandatory for all Wedge connectors tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Wedge connectors work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Wedge connectors tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Wedge connectors Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17103480
Location : karad , maharashtra
NEW TENDER
corrigendum tender for the work of providing & fixing of additional jumpers on tension towers of the various lines by using c-type boltless wedge connectors for various lines under ehv o&m division, karad
Agency / Dept :
maharashtra state electricity transmission company limited MAHATRANSCO
Due Date :
Sep 10, 2026 (5 days left)
Tender Value :
1.89Cr
View Documents
T18 Ref No : 17108746
Location : anand , gujarat
NEW TENDER
tender for dhuvaran gas based power station, turnkey execution of supply and installation of fired type wedge connectors including dismantling of existing bolted type clamp connectors of 132 kv switchyard at dgbps.
Agency / Dept :
energy and petrochemicals department
Due Date :
Sep 16, 2026 (11 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17094449
Location : uttara kannada , karnataka
Source : GEM Tenders
NEW TENDER
tender for 7603010110 , em6290b-700327006000 , em6290b- 700429200002 , em6290b-234110178000 , em6290b- 0259972048 , em6290b-000835010061 , em6290b- 000934010007 , em6290b-000125010524 , em6290b- 700429011002 , em6290b-5110200278 , em6290b- 200835008005 , em6290b-5110251976 , em6290b- 5110850960 , em6290b-5119940041 , em6290b- 5110250052 , em6290b-x00016599 , em6290b- 700429038002 , em6290b-700429-185001 , em6290b- x00018410 , em6290b-0239978348 , em6290b- 002093016100 , em6290b-700292008400 , em6290b- x00010427 , em6290b-5110200612 , em6290b-x00010428 , em6290b-x00010426 , em6290b-5100850060 , em6290b- 700429105001 , em6290b-5110250376 , em6290b- 5205301471 , em6290b-304017008079 , em6290b- 5261420350 , em6290b-5261420450 , em6290b- 700429085002 , em6290b-700429070000 , em6290b- 5589900163 , em6290b-700429160000 , em6290b- 700429140000 , em6290b-7603026104 , em6290b- 0180943002 , em6290b-900288260000 , em6290b- 49978190 , em6290b-700429016000 , em6290b- 0009973375 , em6290b-0000943268 , em6290b- 5260900009 , em6290b-5360980250 , em6290b- 5350980050 , em6290b-700429018005 , em6290b- 001481005030 , em6290b-5360980218 , em6290b- 5240980111 , em6290b-006885006045 , em6290b- 000471020000 , em6290b-000988020019 , em6290b- 700429025001 , em6290b-5240980680 , em6290b-007603- 017102 , em6290b-700327012000 , em6290b-0005333080 , em6290b-x00041391 , em6290b-7603022102 , em6290b- 700429035000 , em6290b-5591420451 , em6290b- 5261420629 , em6290b-5261420060 , em6290b- 0000982218 , em6290b-x00042638 , em6290b-x00042636 , em6290b-700429055001 , em6290b-0031845301 , em6290b-x00040625 , em6290b-700429032003 , em6290b-000472042000 , em6290b-700429115000 , em6290b-002098001022 , em6290b-7603038101 , em6290b-7603052101 , em6290b-7603018101 , em6290b- 700429122001 , em6290b-23540304 , em6299b- 8699950012 , em6290b-8591840001 , em6290b- 700429075001 , em6290b-0001881546 , em6290b- 0001880946 , em6290b-8499970035 , em6290b- 700429028005 , em6290b-5501871180 , em6290b- 5319970345 , em6290b-700429130003 , em6290b- 7603030101 , em6290b-700429100000 , em6290b- 200628103006 , em6290b-705100502035 , em6290b- 000472080000 , em6290b-700386050002 , em6290b- x00026765 , em6290b-700429135000 , em6290b- 700429172000 , em6290b-915007013000 , em6290b- 5249972672 , em6290b-915006006000 , em6290b- 700223006000 , em6290b-007603022105 , em6290b- 735038006102 , em6290b-007603018104 , em6290b- 007603026109 , em6290b-915007010002 , em6290b- 735080010200 , em6290b-49971341 , em6290b- 7603045101 , em6290b-000908045005 , em6290b- 5242030486 , em6290b-0002030851 , em6290b- 0002036346 , em6290b-0002034946 , em6290b- 0002033746 , em6290b-0002036446 , em6290b- 700429110000 , em6290b-8499970065 , em6290b- 8499970066 , em6290b-700429100001 , em6290b- 0052031875 , em6290b-5132155 , em6290b- 700429175001 , em6290b-5552032880 , em6290b-, procurement of nemf kits for main engines spares, drain valve, o ring for set w5, o ring, manifold, clamp, o ing, diaphgarm, insert crank case breather, gasket, seal ring for set w6, washer a cop, shaft seal ring, plate guard g73, sealing ring, banjo screw, y gasket vib.damper, conical spr washer, sealing ring for set w5, gasket for set w5, valve keeper wedge, valve rotator set b11, o ring 39.2x3, adjusting washer, circlip, bolt adjusting, nut, injector, sealing ring fuel injector, grommet, press relief valve, conn fuel rail rear, adapter, trust member, spare part kit for fuel filter, o ring 60x4 for set w5, snap ring 32x1.5 din 471, washer, o ring for set w6, valve check 0.2 bar rhdk 18 l 0.2, union, adaptor, seal ring, fuel filter, gasket kit 8690920032, filter element, grommet 6, o-ring, ring seal g7 ki ka, stud, hex nut, valve, ring seal asm, ring snap, brg.bushing, o ring, bearing body, ring seal, washer a 16, tab washer, axial bearing, ring carrier, piston ring, screw, bearing bushing, flow restrictor, washer a cop s2000/4000, air filter, nipple, contam indicator, cylinder, bushing, bush, pin spring, actuating cylinder, shaft, woodruff key, o ring 26 x 2.5 mmn 294, gasket cyl hd forsetw5, ring sealing a17x21, actuator vlv, flange sealing, repair kit air starter, gasket kit, oil filter element, cover for solars, snap ring 42x1.75 din 472, pressure spring, washer a cop s2000 4000, paper pack centrifugal spinner filter, end plate, first plate, sealing ring for set w6, bearing angular contact roller, cylinder roller bearing, snap ring 80 x 2.5 din 472, seal oil, rotary seal, transition socket, adapter 60deg m14x1. 5, straight connector, benjo screw, hose line, sealringa26x34forsetw6, adaptor 10 / 6 n 15007, regulator fuel retur n 0.5 bar, rubber ring set b11, plug, cover, guide ring, o ring 100 4mm, thermal actuator, seal oil 48x72x8 mnn386, plug with o ring, rubber sleeve 42x100, o ring 28x4
Agency / Dept :
indian navy
Due Date :
Sep 07, 2026 (2 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17107830
Location : tirupati , andhra pradesh
NEW TENDER
tender for set of consumables, set of consumables of ultrasonic testing suitable for arya ? 1(r) ufd machines as per specificatio n no. rdso/m&c/ndt/125/2004, (rev.2), january - 2017.: 1. 0 0 normal wedges suitable for 20 mm dia normal p robes. - 12 nos 2. 17.50 angle wedges suitable for 20 mm dia normal probes ? 10 nos 3. 10 mm dia ,2.5 mhz no rmal probes - 03 no?s 4. 20 mm d?a, 1.25 mhz normal probes - 06 nos. 5. 20 mm d?a, 2.5 mhz normal probes - 12 nos. 6. connector cable bnc to bnc ? 2 mtrs length 10 nos make: modsonic - warranty period: 30 month s after the date of delivery
Agency / Dept :
South Coast Railway SCOR
Due Date :
Sep 10, 2026 (5 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17093570
Location : virudhachalam , tamil nadu
Source : GEM Tenders
NEW TENDER
corrigendum tender for clutch part no 257325400604 , sc392020098 gasket agb part no 3522810179 , sc392020099 gasket agb part no 3522810380 , sc392020109 bearing flywheel pilot 6304 2z part no 278603999945 , sc392020115 bearing cylindrical roller nup 309 n part no 250526203129 , sc392020116 roller cage main shaft onger spigot part no 250526253118 , sc392020127 oil seal 57x39x9 top gear shaft tcac part no 250726257802 , sc392020132 gasket gbs-40 top part no 250530125301 , sc392030001 tapper roller bearing 497 492a part no 261833453101 , sc392030006 screw m14x1.5x50 diff.cage part no 11342514504 , sc392030007 hex.nut m12x1.5 part no 12051696016 , sc392030010 roller cage needle roller brg part no 257433253103 , sc392030013 tapper roller bearing 30214 part no 257433453104 , sc392030024 taper roller bearing 31309 part no 260435303102 , sc392030032 tapper roller bearing 32212 330201 part no 261235603102 , sc392030033 frt.axial roller brg t.126 special repair part no 257433253104 , sc392030034 drag link repair kit part no 0004600005j , sc392030035 tie rod repair kit part no 0003300003j , sc392030064 locking plate part no 3123321073 , sc392030066 gasket front cover. 16829 part no 3123511080 , sc392030088 repair kit drag link rod power steering part no 277846800121 , sc392040019 tapper roller bearing 330632c abc31312l part no 206035013001 , sc392040026 rear axle shaft gasket.1210 part no 257635605301 , sc392050003 front spring shackle part no 352300063 , sc392050006 front spring eye pin part no 3523220530 , sc392050007 rear spring bracket part no 3523250101 , sc392050009 rear spring eye pin part no 3523250530 , sc392050026 front spring mainleaf bushes 1210sa se. 10104 1 20-011 1 part no 206032107127 , sc392050027 front spring second leaf 10104 2 20- 011 2 part no 206032107128 , sc392050028 front spring 4th leaf.10104 4 20-011 4 part no 206032107129 , sc392050029 front spring 5th leaf.10104 5 20-011 5 part no 206032107130 , sc392050031 rear spring second leaf10208 2 part no 257332407102 , sc392050032 rear spring main leaf. 10208 1 part no 257332400103 , sc392050035 wedge screw with nut lock pin w nut part no 0429900037j , sc392050049 screw steering u j m10.4x1.5x35 part no 3219900401 , sc392050058 front spring 3rd leaf.10104 3 part no 257432107116 , sc392050062 front spring assy w bushes 10104a 20-011 part no 257432150101 , sc392050064 rear spring 3rd leaf part no 257332407103 , sc392050069 assy vane pump zf tata1212tc part no 275446600103 , sc392050070 assy power steering gear box zf tata1212tc part no 206746600101 , sc392050071 cartridge plastic tank zf power steering part no 278246609901 , sc392050072 oil tank assy plastic zf steering gear box part no 278244400103 , sc392050094 rear spring bush copper flash split type part no 3523250150 , sc392050109 spring tension acc. control bsii part no 259934108701 , sc392080031 hose assy 3by8 inch front brake 1212tcac part no 261842900170 , sc392090004 engine mounting pad front 807 part no 257624100101 , sc392090006 rear brake drum 1613 8 bolt 22mm hole part no 257542303705 , sc392090007 u, 108 items of tata bought out spares, sc392010002 bolt m8x1.25x35(4f clutch mtg) part no 11064096011, sc392010009 hose clip 100a part no 14280501001, sc392010010 clip worm drive 50a part no 14280500501, sc392010011 hose clip35a part no 14280500357, sc392010014 clutch disc 310mm part no 272425200165, sc392010016 hex.nut m16x1.5 part no 12051501606, sc392010019 clutch repair kit (minor)310mm (ck 84310147206c) part no 257325400603, sc392010020 assy.clutch cover(310mm) (4 finger) part no 885425012527, sc392010023 hose clamp 75a part no 14280599302, sc392010025 radiator assy aluminium cored 1212 sa tcac part no 278650100306, sc392010032 clamp v band connecting turbo to intercoller inlet 1212 tcac part no 278614999942, sc392010035 clamp v band connecting turbo outlet to exhaust pipe1212 tcac part no 278614999931, sc392020021 cyl. roller bearing (nu 309n) part no 9811201, sc392020028 sealing gasket (agb) part no 3522810480, sc392020053 roller 4x12 part no 257428209901, sc392020054 spring washer b12 part no 12520601200, sc392020073 clutch release brg. lock part no 3122541013, sc392020077 oil seal(main shaft rear) pos 1403 part no 250526207802, sc392020078 roller cage 3rd (bb 80005) part no 250526203124, sc392020079 roller cage 4th part no 250526203123, sc392020080 gear box packing kit 40 gbs part no 250526000102, sc392020083 agb mtg bolt. m12x1.5x95 part no 11063999093, sc392020084 bolt m8x1.25x50 (40top cover) part no 11063808506, sc392020086 tapper roller bearing (30308) part no 250526303104, sc392020088 roller cage (nw 223020) part no 9810512, sc392020091 spring kit 310mm clutch part no 257325400604, sc392020098 gasket(agb) part no 3522810179, sc392020099 gasket(agb) part no 3522810380, sc392020109 bearing flywheel pilot 6304 2z part no 278603999945, sc392020115 bearing cylindrical roller nup 309 n part no 250526203129, sc392020116 roller cage main shaft onger spigot part no 250526253118, sc392020127 oil seal 57x39x9 top gear shaft tcac part no 250726257802, sc392020132 gasket gbs-40 top part no 250530125301, sc392030001 tapper roller bearing 497/492a part no 261833453101, sc392030006 screw m14x1.5x50 (diff.cage) part no 11342514504, sc392030007 hex.nut m12x1.5 part no 12051696016, sc392030010 roller cage(needle roller brg) part no 257433253103, sc392030013 tapper roller bearing 30214 part no 257433453104, sc392030024 taper roller bearing 31309 part no 260435303102, sc392030032 tapper roller bearing 32212 / 330201 part no 261235603102, sc392030033 frt.axial roller brg t.126/special repair part no 257433253104, sc392030034 drag link repair kit part no 0004600005j, sc392030035 tie rod repair kit part no 0003300003j, sc392030064 locking plate part no 3123321073, sc392030066 gasket front cover.(16829) part no 3123511080, sc392030088 repair kit drag link rod power steering part no 277846800121, sc392040019 tapper roller bearing 330632c/abc31312l part no 206035013001, sc392040026 rear axle shaft gasket.1210 part no 257635605301, sc392050003 front spring shackle part no 352300063, sc392050006 front spring eye pin part no 3523220530, sc392050007 rear spring bracket part no 3523250101, sc392050009 rear spring eye pin part no 3523250530, sc392050026 front spring mainleaf /bushes 1210sa/ se. 10104/1 /20-011/1 part no 206032107127, sc392050027 front spring second leaf 10104/2 / 20-011/2 part no 206032107128, sc392050028 front spring 4th leaf.10104/4 20-011/4 part no 206032107129, sc392050029 front spring 5th leaf.10104/5/ 20-011/5 part no 206032107130, sc392050031 rear spring second leaf10208/2 part no 257332407102, sc392050032 rear spring main leaf. 10208/1 part no 257332400103, sc392050035 wedge screw with nut/ lock pin w/ nut part no 0429900037j, sc392050049 screw (steering u j) (m10.4x1.5x35) part no 3219900401, sc392050058 front spring 3rd leaf.10104/3 part no 257432107116, sc392050062 front spring assy w/bushes 10104a / 20-011 part no 257432150101, sc392050064 rear spring 3rd leaf part no 257332407103, sc392050069 assy vane pump zf tata1212tc part no 275446600103, sc392050070 assy power steering gear box zf tata1212tc part no 206746600101, sc392050071 cartridge plastic tank zf power steering part no 278246609901, sc392050072 oil tank assy plastic zf steering gear box part no 278244400103, sc392050094 rear spring bush copper flash split type part no 3523250150, sc392050109 spring tension acc. control bsii part no 259934108701, sc392080031 hose assy 3/8 inch front brake 1212tcac part no 261842900170, sc392090004 engine mounting pad front (807) part no 257624100101, sc392090006 rear brake drum (1613) 8 bolt(22mm hole) part no 257542303705, sc392090007 u j cross kit (tata 1510) part no 885441211612, sc392090009 assy. u.j.long fork complete (slip joint assy. tata 1510) part no 257641120121, sc392090018 brake lining set std without rivets 1510 rear part no 885442061616, sc392090021 clutch disc 352mm dia tata lps 3015 part no 275225200106, sc392110007 taper roller brg 47487xl/ 47420sl part no 257535303102, sc392110011 tapper roller bearing (32214) part no 257535603110, sc392110016 gasket (silencer) 1212tc part no 276349205301, sc392110041 fan belt v ribbed (1212c) part no 278615996302, sc392110047 flange yoke (90 dia) part no 257641115110, sc392110062 m22x2.5 assy. wheel nut 1212c part no 263140100107, sc392110066 kit auto slack adjuster part no 277842300165, sc392110067 assy auto slack adjuster front rh part no 277642300231, sc392110068 assy auto slack adjuster front lh part no 277642300230, sc392110077 oil seal 145x120x15 rear hub inner ra108rr s cam part no 266835607703, sc392110078 gasket rear differential ra 108rr part no 257335115302, sc392110081 assy auto slack adjuster rear straight 1212tcac part no 277842300182, sc392110085 taper roller bearing (inner) part no 257635603101, sc392110088 m22x2.5x107 hub bolt rear ra108rr part no 263140206701, sc392110093 spherical washer part no 257632509201, sc392110100 assy. nylon pipe air gauge 1212 tcac part no 206754200102, sc392110121 3/8 inch assy.hose chassis to qrv part no 261842910104, sc392120012 u clamp rear part no 278232404201, sc392120068 assy. power stg. gear box rane part no 261846600102, sc392130018 taper roller bearing 28580 / 28521 part no 269126203103, sc392130028 taper roller bearing 25572/25520 c/s part no 269126303104, sc392130041 assy. needle cage 5th gear g600 gear box 45x52x36 part no 269126200143, sc392130043 oil seal drive shaft g600 (48x65x10) part no 269126257808, sc39214000 gasket rear axle housing cover diff.lock part no 257335105303, sc392140013 radiator assy. bsiv part no 206950100271, sc392140014 intercooler assy. bsiv part no 206950110102, sc392140016 352 mm dia clutch mounting bolt (3/8 uncx35mm) part no 275425408002, sc392150003 clutch disc assy dia 380 mm part no 272425200215, sc392150004 clutch cover assy dia 380 mm part no 272425400215, sc392150007 clutch release bearing assy bsvi part no 272425600289, sc431040053 water pump assy.(cummins) wpa 451 part no 278620999959, sc431040185 gasket exhaust manifold to turbo charger 1212 tcac part no 278614999902
Agency / Dept :
nlc india limited neyveli lignite corporation limited
Due Date :
Sep 07, 2026 (2 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17094207
Location : vemula , andhra pradesh
Source : GEM Tenders
NEW TENDER
corrigendum tender for bitumenlayingwork2 , kerbstonelayingwork1 , tailingexcavationwork1 , borrowearthsoilwork3 , removinghdpeliningwork1 , dismantlingstonepitching1 , backfillingoftailing1 , laboratorytestwork15 , humepipework1 , humepipework2 , humepipework3 , humepipework4 , humepipework5 , humepipework6 , earthworkfillingforbund1 , stonepitchingwork5 , brickwork1 , brickwork2 , plasteringwork1 , plasteringwork2 , plasteringwork3 , paitingwork1 , paitingwork2 , paitingwork3 , handrailingwork3 , ccforflooringwork1 , plasteringwork4 , glasssstripswork1 , cementpunning1 , aluminumwork1 , shutterworks1 , glasspaneswork1 , siliconsealantwork1 , doorworks1 , mechanicalinstallationpumps1 , mechanicalinstallationpipes1 , mechanicalinstallationpipes2 , mechanicalinstallationpipes3 , electricallinstallation5 , mechanicalerections1 , disposalareappep1 , slimedisposalareappep1 , slimedisposalareappep2 , constructionofelectricalfacilityworklumpsum1 , panelneartaillingpond , automaticpowerfactorcorrectionpanel1 , batterychargerdcboard , lcsmushroomheadstay1 , lcsmushroomheadstay2 , lcsmushroomheadstay3 , distributiontransformer1 , dieselgeneratorset1 , dieselgeneratorfounation1 , ltbusduct1 , htswitchgearincomingpanel1 , htswitchgearincomingpanel2 , mainlightingdistributionboard1 , sublightingdistributionboard , highmastlighting1 , highmastlighting2 , lighteningfixture1 , ltpowercables1 , htpowercables1 , htpowercables2 , ltcontrolcables , junctionboxes1 , earthinglightningitems1 , aircondition1 ,, construction of 4th stage tailing pond, stripping and clearing the site of jungles, bushes, shrubs, wood etc., uprooting of rank vegetation, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level, removal of undesirable materials etc. including removal and disposal of debris at suitable locations with all leads and lifts, as decided by the engineer-in-charge., felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unserviceable material at suitable ocations as decided by the engineer-in-charge. beyond 30 cm girth upto and including 60 cm girth, felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unserviceable material at suitable ocations as decided by the engineer-in-charge. beyond 60 cm girth upto and including 120 cm girth, felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unserviceable material at suitable ocations as decided by the engineer-in-charge. beyond 120 cm girth upto and including 240 cm girth, earth work in excavation in development of embankment profile in the following types of soils for all lifts, including taking adequate protection during excavation, drilling and transporting the excavated spoil / material after stripping of top soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation in development of embankment profile in the following types of soils for all lifts, including taking adequate protection during excavation, drilling and transporting the excavated spoil / material after stripping of top soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. ordinary rock, earth work in excavation in development of embankment profile in the following types of soils for all lifts, including taking adequate protection during excavation, drilling and transporting the excavated spoil / material after stripping of top soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond.hard rock (blasting prohibited), earth work in excavation of hillocks within existing pond area in the following types of soils for all lifts, transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead and lift within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation of hillocks within existing pond area in the following types of soils for all lifts, transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead and lift within acquired area of tailing dam & pond. ordinary rock, earth work in excavation of hillocks within existing pond area in the following types of soils for all lifts, transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead and lift within acquired area of tailing dam & pond. hard rock (blasting prohibited), earth work in excavation in bed layer -1 in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, transporting the excavated soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of the engineer-in-charge for any lead within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation in bed layer -1 in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, transporting the excavated soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of the engineer-in-charge for any lead within acquired area of tailing dam & pond. ordinary rock, earth work in excavation in pipe-support foundations, peripheral drains, culverts, diversion drain, watch towers, miscellaneous equipment foundations etc. in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, drilling and transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation in pipe-support foundations, peripheral drains, culverts, diversion drain, watch towers, miscellaneous equipment foundations etc. in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, drilling and transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. ordinary rock, earth work in excavation in pipe-support foundations, peripheral drains, culverts, diversion drain, watch towers, miscellaneous equipment foundations etc. in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, drilling and transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. hard rock (blasting prohibited), supplying and transporting earth of specified quality (as per specification and drawing) from borrow-pit i.e. the source not owned by ucil but arranged by the contractor at his own cost including all taxes, royalty etc and filling the same in bed later - 1 in layers not exceeding 250 mm above existing ground level, watering of each layer in the stipulated manner as per specification and / or direction of the engineer-in-charge and compaction by mechanical means to achieve required degree of compaction as per specification, all complete as per drawing, specification and direction of the engineer-in-charge., supplying and transporting earth of specified quality (as per specification and drawing) from borrow-pit i.e. the source not owned by ucil but arranged by the contractor at his own cost including all taxes, royalty etc and filling the same in embankment in random fill zone in layers not exceeding 250 mm in proper profile to various heights above existing ground level, watering of each layer in the stipulated manner as per specification and / or direction of the engineer-in-charge and compaction by mechanical means to acheive required degree of compaction as per specification, disposal of excess of unusable material all complete as per drawing, specification and direction of the engineer-in-charge for any lead and lift (sectional measurement for compacted filling will only be paid)., supplying and transporting clay of specified quality and property (as per specification and drawing) from borrow-pit i.e. the source not owned by ucil but arranged by the contractor at his own cost including all taxes, royalty etc and laying the same over random fill on upstream side of embankment in layers not exceeding 150 mm measured loose in proper profile, watering of each layer in stipulated manner to various heights and compacting each layer by mechanical means to achieve required degree of compaction as per specification and / or direction of the engineer-in-charge, all complete as per drawing, specification and direction of the engineer-in-charge for any lead and lift (sectional measurement for compacted thickness will only be paid)., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) over clay lining on upstream side of dam with voids filler with stone dust with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge. note - payment shall be made for the actual area of coverage of stone pitching. wastage shall not be payable., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) over random fill on downstream side of dam with voids filler with stone dust with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge. note payment shall be made for the actual area of coverage of stone pitching. wastage shall not be payable., supplying, transporting, spreading and compacting sand (average 100 mm thick) over stone pitching on upstream side of dam with all lead and lift including all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge., supplying, transporting and laying 1500 micron thick high density polyethelene (hdpe) sheet (textured on both sides) as lining over sand cushion layer on upstream side of dam, laid in position by qualified and skilled installer certified by the manufacturer and approved by the engineer-in-charge, with all lead and lift including sealing of joints (hot wedge single and dual track seaming and / or extrusion fillet seaming method or any other specialized method e.g. robotic two stitch welding etc.) of new sheets and sealing of new lining sheet with existing lining sheet with an overlap of approximately 1.0m, anchoring the new lining sheet on top of new embankment, maintaining quality control, conducting tests as per requirement of the specification, all complete as per drawing, provisions of specification and direction of the engineer-in-charge. note payment shall be made for the actual area of coverage of hdpe lining sheet. overlapping area, wastage etc. shall not be payable., supplying, transporting, laying and compacting uniformly graded stone aggregate filters within new embankment at all levels,incl shuttering, tools tackles all complete as per drawing, specification and direction of the engineer-in-charge., supplying, transporting, laying and compacting uniformly graded coarse sand filters within new embankment at all levels incl shuttering, tools tackles all complete as per drawing, specification and direction of the engineer-in-charge. (sand shall conform to is383). laying and compacting rock-fill toe dam on downstream side of embankment with following materials at all levels, all complete as per drawing, specification and direction of the engineer-in-charge., with rocks arranged by the contractor at his own cost (rate to include supply and transport also), earth work in back-filling including watering, ramming and compaction at all elevation around pipe support foundations, drain trenches etc. as per specifications and drawings and as directed by the engineer-in-charge with selected soils obtained from stacks under item no. 6 above for any lead within acquired area of tailing pond and dam. (filling shall be done in layers not exceeding 250 mm in loose thickness and watered as necessary. each layer of filling to be compacted to acheive a dry density of not less than 95% of the proctor density)., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) in diversion drain and at outfall locations with interstices between adjacent stones filled-in with stones of proper size well-driven in order to ensure tight packing and complete filling of all interstices so that no chip can be removed by hand, with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge. note payment shall be made for the actual area of coverage of stone pitching. wastage shall not be payable., earthwork in filling using earth obtained from item nos. 3, 4, 5 and 6 above in construction of embankment of access roads (total four nos. access roads) connecting top of new tailing pond embankment in layers not exceeding 250 mm in proper profile to various heights above existing ground level, watering of each layer in the stipulated manner as per specification and / or direction of the engineer-in-charge and compaction by mechanical means to acheive required degree of compaction as per specification, all complete as per drawing, specification and direction of the engineer-in-charge for any lead and lift (sectional measurement for compacted filling will only be paid)., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) on sides of embankments of access roads with voids filler with stone dust with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge., supplying site machine batched plain cement concrete of 136 nominal mix (1 cement 3 coarse sand 6 graded stone aggregate with 20 mm and down aggregates) below foundations, walls, drains, pits etc. including mixing, transporting, placing in position, compacting to proper thickness and level, curirg, maintaining proper quality control including cost of admixtures in recommended proportions as per is 9103 to accelerate/retard setting of concrete, improve workability without impairing strength and durability but excluding cost of shuttering work, all complete as per specifications, drawings and direction of the engineer-in-charge and including cost of form work., extra over item 30 bove for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. note (i) cost of shuttering and reinforcement shall be paid in respective items. (note the bidder has to quote only extra cost above the item 30 in the line item of 31, for example- if the cost of item 30 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 31 of the price part), providing, mixing, laying in position in substructure upto plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m25 grade with minimum cement content of 330 kg/cum, providing, mixing, laying in position in substructure upto plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m30 grade with minimum cement content of 350 kg/cum, extra over item 32 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. concrete of m25 grade with minimum cement content of 330 kg/cum (note the bidder has to quote only extra cost above the item 32 in the line item of 34, for example- if the cost of item 32 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 34 of the price part), extra over item 33 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying.concrete of m30 grade with minimum cement content of 350 kg/cum. (note the bidder has to quote only extra cost above the item 33 in the line item of 35, for example- if the cost of item 33 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 35 of the price part), providing, mixing, laying in position in superstructure above plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m25 grade with minimum cement content of 330 kg/cum, providing, mixing, laying in position in superstructure above plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m30 grade with minimum cement content of 350 kg/cum, extra over item 36 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. concrete of m25 grade with minimum cement content of 330 kg/cum (note the bidder has to quote only extra cost above the item 36 in the line item of 38, for example- if the cost of item 36 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 38 of the price part), extra over item 37 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. concrete of m30 grade with minimum cement content of 350 kg/cum (note the bidder has to quote only extra cost above the item 37 in the line item of 39, for example- if the cost of item 37 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 39 of the price part) (another note-2 for item nos. 23, 24, 25 and 26 (i) excess cement, if required in design mix, with respect to the minimum cement content mentioned above, shall be paid under respective item. (ii) cost of shuttering and reinforcement shall be paid through respective items.(iii) rendering of treatment at construction joint shall be carried out under supervision of manufacturer, cost of which shall be included in rate of these items. (iv) design of pipe support foundations, high mast foundations, miscellaneous pump foundations, transformer and other equipment foundations shall be under scope of the contractor. (v) contractor shall prepare design drawings and bar bending schedules for all rcc structures and submit the same to ucil for approval., supplying and laying precast reinforced cement concrete elements at any level using 20 mm and down graded crushed stones as coarse aggregate as per approved design mix including supply of materials / labour / tools and tackles etc. as required, formwork, mixing, laying, compacting to proper size and thickness, curing, storing, handling, transporting, erection without damage etc. but excluding cost of shuttering and reinforcement, all complete as per drawings, specifications and direction of the engineer-in-charge. concrete of m25 grade with minimum cement content of 330 kg/cum note (i) excess cement, if required in design mix, with respect to the minimum cement content mentioned above, shall be paid under respective item. (ii) cost of shuttering and reinforcement shall be paid in respective items., add for consumption of extra / excess cement, if required, in design mix concrete (item no. 23 to 26 above) over the specified minimum cement content in respective items mentioned above. note i) requirement of extra cement with respect to the minimum cement content mentioned against respective items of approved design mix of concrete to achieve the characteristic strength for each design mix must be approved by engineer-in-charge during mix design stage based on laboratory test results which must also be approved by the engineer-in-charge..(ii) payment shall be on the basis of actual quantity of cement used in mix concrete executed., supplying, installing, dismantling and removing shuttering for foundations and substructures upto plinth level in all kinds of rcc work for all leads and lifts including necessary rendering of concrete surfaces after exposure, maintaining proper quality control, supervision etc., all complete as per drawings, specification and direction of engineer-in-charge. notes for the above item nos. i) the design of formwork/staging shall be submitted by the contractor to ucil for approval before commencement of work., supplying, installing, dismantling and removing shuttering for superstructures above plinth level in all kinds of rcc work for all leads and lifts including necessary rendering of concrete surfaces after exposure, maintaining proper quality control, supervision etc., all completer as per drawings, specification and direction of engineer-in-charge. notes for the above item nos. i) the design of formwork/staging shall be submitted by the contractor to ucil for approval before commencement of work., supplying, straightening, cutting, bending, binding with 2 nos. 20 gauge annealed soft iron wire and placing in position following types of reinforcement, of all diameters to all types of rcc members in substructure upto plinth level including all lifts and leads, maintaining proper quality control, supervision, provision of necessary chairs/spacers, tying and bending of dowel bars, cover blocks of same grade of concrete, preparation of bar bending schedule and getting the same approved from ucil before construction, all complete as per drawings, specification and direction of the engineer-in-charge. thermo-mechanically treated (tmt) bars of grade fe-500d conforming to is1786. note for above items. i) the supply of fe 500d tmt bars conforming to is 1786 (latest) shall be fromm/s sail, iisco, rinl, tata steel and jindal from their own plants rolled from virgin material only.ii) reinforcement steel bars from rerollers of the above manufacturers will not be accepted iii) no extra payment shall be made on account of rolling margin and wastage iv) contractor shall supply copies of the documentary evidence of purchase of steel, test certificates from these manufacturers (steel either directly purchased or through their dealers)and also tests from third party, if required, to be arranged at no extra cost.v) welding weights, weight of binding wires etc. shall not be measured for payment but the cost of the same shall be deemed to have been included in the quoted rate.vi) chairs and spacers provided will not be paid extra.vii) preparation of bar bending schedule for reinforcement in all types of rcc structures will be prepared by the contractor and submitted to ucil for approval., supplying, straightening, cutting, bending, binding with 2 nos. 20 gauge annealed soft iron wire and placing in position following types of reinforcement, of all diameters to all types of rcc members in superstructure above plinth level including all lifts and leads, maintaining proper quality control, supervision, provision of necessary chairs/spacers, tying and bending of dowel bars, cover blocks of same grade of concrete, preparation of bar bending schedule and getting the same approved from ucil before construction, all complete as per drawings, specification and direction of the engineer-in-charge. thermo-mechanically treated (tmt) bars of grade fe-500d conforming to is1786. note for above items. i) the supply of fe 500d tmt bars conforming to is 1786 (latest) shall be fromm/s sail, iisco, rinl, tata steel and jindal from their own plants rolled from virgin material only.ii) reinforcement steel bars from rerollers of the above manufacturers will not be accepted iii) no extra payment shall be made on account of rolling margin and wastage iv) contractor shall supply copies of the documentary evidence of purchase of steel, test certificates from these manufacturers (steel either directly purchased or through their dealers)and also tests from third party, if required, to be arranged at no extra cost.v) welding weights, weight of binding wires etc. shall not be measured for payment but the cost of the same shall be deemed to have been included in the quoted rate.vi) chairs and spacers provided will not be paid extra.vii) preparation of bar bending schedule for reinforcement in all types of rcc structures will be prepared by the contractor and submitted to ucil for approval., supplying, fabricating and installing mild steel anchor bolts / holding down bolts, pipes, sleeves, inserts, hangers, conduits and any other mild steel, cast iron, g.i.cast steel and other fixures including lugs in cement concrete, including necessary templates for keeping them in position and with welding, bending to the required shape, if necessary and prime coat and final painting whereever necessary/applicable, cost of scaffolding, as required, at all leads and lifts, storing, handling, transporting, erection without damage, placing in position, maintaining proper quality control etc. all complete as per drawings, specification and direction of engineer-in-charge. note i) all materials shall be from m/s sail, iisco, rinl and tata steel from their own plants rolled from virgin material only. ii) welding weights, connections, bolts and nuts etc. shall not be measured for payment but the cost of which shall be deemed to have been included in the quoted rate. iii) contractor shall supply copies of the documentary evidence of purchase of steel, test certificates from these manufacturers and also tests from third party, if required, to be arranged at no extra cost. iv) all holes will be made by drilling only. gas cutting of holes will not be permitted. v) electrodes manufactured by m/s advani oerlikon, esab india, indian oxygen and dandh secheron only shall be used., taking delivery from ucil, handling, transporting and installing in cement concrete at all elevations anchor bolts, anchors, pipes, sleeves, inserts, hangers, conduits and any other mild steel, cast iron, g.i.cast steel and other fixures, cost of scaffolding, as required, placing in position, maintaining proper quality control etc. all complete as per drawings, specification and direction of engineer-in-charge.. note i) the fabricated embedded items including lugs etc. shall be supplied by ucil., supplying, fabricating and installing structural steel work conforming to is 2062 (grade e250, quality b0) in all kinds of work for pipe and cable supports at top of dam/embankment at all elevations including straightening of raw steel (if required), cutting, making edge preparation, making connections at fabrication yard by welding / bolting, hoisting, fixing in position by welding / bolting, cleaning and preparation of all steel, storing, loading, transportation, unloading, delivery at erection site, maintening proper quality control, surface preparation for painting, erection, alignment and connections of all structures true to line, level, plumb and dimension including rectification, if any, splicing, applying a primer coat of approved make before erection and two coats of final paint of approved make after erection and final alignment, preparation of design d
Agency / Dept :
uranium corporation of india limited UCIL
Due Date :
Sep 07, 2026 (2 days left)
Tender Value :
172Cr
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16943879
Location : sirsa , haryana
LIVE TENDER
tender for 12/xen/ts/srs/2026-27 dated 24.08.2026 replacement of pg and t-cla..., replacement of pg and t-clamp with boltless c - wedge connector for 132kv zebra-zebra conductor at 132kv s/stn. hvpnl, dabwali, district- sirsa - erection charges
Agency / Dept :
haryana vidyut prasaran nigam limited HVPNL
Due Date :
Sep 07, 2026 (2 days left)
Tender Value :
1.53L
View Documents
T18 Ref No : 17022500
Location : gaya , bihar
LIVE TENDER
tender for set of accessories for ultrasonic testing of axles for eeci make ufd machine, set of accessories for ultrasonic testing of axles for eeci make ufd machine model:digisca n ds 333. each set consists of 10 types item : (1) normal probe 2.5 mhz/20 mm. dia. qty: 10 nos./set. (2) p erspex wedges for normal probe 10 deg. suitable for 20 mm. dia. probe, qty : 01no./set. (3) perspex wedg es for normal probe 12.5 deg. suitable for 20 mm. dia. probe. qty : 01 no./set.(4) perspex wedges for nor mal probe 15 deg. suitable for 20 mm. dia. probe. qty : 02 nos./set. (5)perspex wedges for normal probe 1 7.5 deg. suitable for 20 mm. dia. probe. qty : 03 nos./set. (6) perspex wedges for normal probe 37/37.5 d eg. along with curvature ( dia. of curvature 152 mm. to 172 mm.) suitable for 20 mm. dia. probe. qty : 01 n o./set. (7) perspex wedges for normal probe 37/37.5 deg.along with curvature ( dia. of curvature 185 mm. to 205 mm.) suitable for 20 mm. dia. probe. qty : 01no./set. (8) calibration bar : 50 mm. x 500 mm. length steel bar along with oem certificate. qty : 01no./set. (9) calibration bar : 50 mm. x 182 mm. length steel b ar along with oem certificate. qty : 01 no./set. (10) pkbb-2: connector cable bnc to bnc 2 meters length ( rg-58) qty : 10 nos./set - warranty period: 30 months after the date of delivery
Agency / Dept :
east central railway ECR
Due Date :
Sep 10, 2026 (5 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17050227
Location : banaskantha , gujarat
Source : GEM Tenders
LIVE TENDER
tender for supply of raw materials for iti boq1 alluminium flat , cast iron flat , gi sheet plain , ms flat , ms c channel , ms angel , ms square bar , ms round bar , ms hexagonal , ms pipe , plastigauge , arc welding cable , bronze electrode , hss drill bit , pvc insulated copper wire , bare copper wire , pvc paper , non modular elec. pvc board , elec. pvc flexible conduit pipe , elec. pvc elow , elec. pvc casing capping , resistor , capacitor , diode , transistor , cable jointing kit , ferrule alluminium wire connector , nichrome wire , arduino uno with connector , bread board for wiring with 400 tie points , stepper motor driver , stepper motor , pvc bobbin for transformer , silicon steel stamping e and i types , fiber wedge , pcb , led light , cfl lamp , incandescent lamp , spot light , led down light , par light , transformer , construction of axial cable , rg6 cable connector, 50x03 mm, 50x10 mm, 50x06 mm, 24 swg 4x8 foot, 50 x 02 mm, 75x5x40 mm, 75x5x35 mm, 25x3 mm, 25x25 mm, dia 10 mm, dia 28 mm, dia 32 mm, dia 40 mm, dia 45 mm, a/f 18 mm, dia 40 mm, dia 50x3 mm, dia 50x5 mm, 0.025-0.175 mm, multi cored copper 400/600 ampere 50 sq mm., 3.15x350 mm -50 no. in pkt, 4 to 13 mm - 10 no. in set, (1/18), (3/20), (7/20), 08 swg, 7 mil, 10x12 inch with punching on plate, 19 mm, tee , elow for 12 mm, 1 k ohm, 1/2 w, 470 ohm, 1/2 w, 82 ohm, 1/4 w, 1000 ufd 50 v, in4007, bc 547, resin compound, for 35 mm cable, 22 swg, 16u2 atmega328p, with jumper wire 10 m to m, 10 f to f, 10 m to f, a4988, nema 17, making 1x1 inch, 2mm width for 1x1 inch, 1-5 mm, 4x4 inch, 5w, 12v dc, 9w, 240v, 18w,240, 60w, 100w, 200w, 15w,240v, 3wx60 ,350w, 230/6v, 500ma, rg6, compression connector for tv coaxial
Agency / Dept :
department of employment and training DET
Due Date :
Sep 15, 2026 (10 days left)
Tender Value :
82.07K
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17070542
Location : nashik , maharashtra
Source : GEM Tenders
LIVE TENDER
corrigendum tender for 1 angle lh-top , 2 angle rh-top , 3 angle rh-bottom , 4 bracket-rh , 5 control column support bracket , 6 edge member-rh , 7 edge member-lh , 8 support member - nlg jack bracket , 9 tee-bot-sta16 , 10 splice-rh-sta17 , 11 tee-rh -sta18 -oxy- bay , 12 splice-lh -sta18 , 13 locking bracket-step way , 14 stepway pedal , 15 leveling bracket-fwd , 16 leveling bracket-aft-lh , 17 side member-lh-19-20 , 18 tee-rh-sta24-sta25 , 19 frl locator bracket-rh- sta19 , 20 angle-lh -sta24 , 21 bracket-y stopper , 22 lever-locking bracket , 23 lever-locking bracket , 24 lever-locking bracket , 25 lever , 26 bracket lever , 27 jacking pad , 28 i-s rib 2 center , 29 i-s rib 3 fwd , 30 i-s rib 6 , 31 lg aux- spar -fwd , 32 lg aux- spar -aft , 33 fork fitting -bal-tab , 34 rear spar splice joint , 35 i-b hinge sta3 -lh , 36 o-b hinge sta11 -lh , 37 nose block -fixed mass -sta1-sta , 38 t-e block -m-b -lh , 39 t-e block -o-b , 40 angle plate - support bracket , 41 fork fitting-bal-tab , 42 stopper -lh , 43 support plate -root , 44 wow bracket , 45 sleeve rh , 46 plate , 47 boss , 48 spacer-unfether pump , 49 bracket , 50 bell crank lever , 51 nut , 52 flap , 53 prv mounting bracket , 54 bracket , 55 bracket , 56 lever , 57 lever , 58 strech test bkt-rear cockpit , 59 lever , 60 actuator mounting lug , 61 bracket_lh , 62 base bracket , 63 lever , 64 spacer , 65 flange , 66 wedge- qtr panel -fc , 67 block , 68 bracket connector fitting , 69 lever , 70 angle, osaero job work for manufacturing of 70 parts ref semfg1260, 11f-1a-1110-229-0a0, 11f-1a-1110-230-0a0, 11f-1a-1110-231-0a0, 11f-1b-1510-006-2a0, 11f-1b-1540-010-0a0, 11f-1b-1620-002-2a0, 11f-1b-1620-003-1a0, 11f-1b-1620-006-0a0, 11f-1b-2160-004-0a0, 11f-1b-2170-009-0a0, 11f-1b-2180-007-0a0, 11f-1b-2180-013-0a0, 11f-1b-3090-008-0a0, 11f-1b-4020-006-0a0, 11f-1b-4080-001-0a0, 11f-1b-4090-001-0a0, 11f-1d-1120-166-0aa, 11f-1d-1120-170-0a0, 11f-1d-1120-177-0a0, 11f-1d-1120-178-0a0, 11f-1g-0080-001-0a0, 11f-1g-2010-001-0a0, 11f-1g-2020-001-0a0, 11f-1g-2030-002-0a0, 11f-1g-3010-011-0a0, 11f-1g-3020-002-0a0, 11f-2b-2000-017-1aa, 11f-2b-2000-022-1aa, 11f-2b-2000-024-1aa, 11f-2b-2110-001-1aa, 11f-2b-2130-001-1aa, 11f-2b-2140-001-1aa, 11f-2b-3070-001-1ab, 11f-2b-4000-051-1aa, 11f-2g-4000-001-1a0, 11f-2g-5000-001-1a0, 11f-2f-1000-141-1aa, 11f-2f-1000-801-0a0, 11f-2f-1000-804-1aa, 11f-3c-0010-007-0a0, 11f-3g-1000-008-0a0, 11f-3d-0010-001-1a0, 11f-3f-4000-005-0a0, 11f-4a-1000-007-000, 11f-4b-0010-010-0a0, 11f-4b-1040-003-0a0, 11f-4b-1150-004-0a0, 11f-5a-0020-005-000, 11f-5a-1230-001-0ab, 11f-5a-1240-001-0aa, 11f-5b-0010-006-0a0, 11f-5b-3010-003-0a0, 11f-5p-0010-006-0a0, 11f-6e-0010-001-0a0, 11f-6e-3250-001-0a0, 11f-6e-3280-001-0a0, 11f-6e-3520-001-0a0, 11f-6e-3710-001-0a0, 11f-6f-3120-001-0a0, 11f-6f-3130-001-0a0, 11f-6r-3850-001-1a0, 11f-6r-5010-001-0a0, 11f-6r-5030-001-0a0, 11f-7c-0040-001-000, 11f-8l-3170-002-0a0, 11f-9b-0050-004-0a0, 11f-9b-3440-002-0a0, 11f-9g-0080-001-0a0, 11f-6a-3330-001-0a0, 11f-7e-0010-001-0a0
Agency / Dept :
hindustan aeronautics limited HAL
Due Date :
Sep 05, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Wedge Connectors. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Wedge Connectors sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Wedge Connectors Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Wedge Connectors, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Wedge Connectors Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Wedge Connectors Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Wedge Connectors.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Wedge Connectors depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Wedge Connectors Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Wedge Connectors bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Wedge Connectors. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Wedge Connectors, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Wedge Connectors, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Wedge Connectors?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Wedge Connectors tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Wedge Connectors?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Wedge Connectors, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Wedge Connectors is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All