10 Latest Telemetry monitoring system Tenders List

tender for advanced memory extraction system , protocol analysis toolkit , ai enabled drone forensics analysis suite , high performance ai workstation , full duplex software defined radio 70 mhz to 6 ghz , handheld spectrum analyzer upto 6 ghz , wideband antenna set 70 mhz to 6 ghz , broadband low noise amplifier 70 mhz to 6 ghz , engineering grade multi-functional 3d printer , power amplifier , 3 dof uav stability test platform, technology equipment facilitating drone forensic laboratory, required for forensic acquisition of digital evidence from damaged or inaccessible uav memory through chip off jtag isp and other extraction techniques this forms the primary evidence acquisition capability of the laboratory and one centralized system is adequate as evidence acquisition is undertaken in a controlled laboratory environment and cases are processed sequentially, required for debugging embedded electronics analysing communication protocols between uav subsystems reverse engineering of firmware interfaces and validating indigenous hardware developments and one toolkit can adequately support all protocol analysis activities as it is a shared laboratory resource, required for automated analysis and correlation of digital evidence including flight logs firmware telemetry images and videos thereby reducing investigation time and improving forensic accuracy and one software installation is sufficient as forensic analysis will be conducted on the dedicated forensic workstation, required to execute computationally intensive ai enabled forensic applications firmware reverse engineering sdr signal processing and large scale evidence analysis and one workstation provides adequate computing capability for centralized forensic processing, required for advanced sdr experimentation involving mimo communications protocol analysis and high bandwidth signal processing and due to its dual transmit and dual receive capability meeting the laboratorys advanced sdr requirements, required for rf spectrum monitoring interference detection uav communication analysis and field investigations of rf systems and enable laboratory and field measurements while ensuring continuity during calibration or maintenance, required to receive and characterize uav control telemetry video and gnss signals over multiple frequency bands using different antenna types and provide flexibility for directional and omnidirectional measurements antenna characterization and simultaneous sdr experiments, required to improve receiver sensitivity for weak signal interception rf surveillance and spectrum monitoring and two units shall support multiple receive chains multi channel sdr configurations and simultaneous laboratory experiments besides field validations, required for rapid prototyping and fabrication of uav components sensor mounts rf enclosures battery housings and test fixtures thereby reducing development time and dependence on external vendors and one centralized printer is sufficient for the anticipated prototyping workload, required for testing of custom uav payloads and endurance requirements supporting indigenous system integration and one integrated station is adequate as testing is a specialized laboratory activity, required for validation and calibration of inertial navigation sensors flight controllers payload stabilization systems and indigenously developed ew resilience modules fitted onto uavs through a controlled platform and one centralized platform adequately supports all sensor calibration and validation activities

T18 Ref No : 17466389

Location : bathinda , punjab

Source : GEM Tenders

LIVE TENDER

Agency / Dept :

Due Date :

Oct 16, 2026 (1 day left)

Tender Value :

Refer Document

tender for four wheeler buggy simulator with complete working model , pmsm motor dyno with variable load , two wheeler e-scooty cut model with training facility , battery prototyping and manufacturing kit , battery pack tester charging and discharging 99v 20a 1ch , battery management training systems , charging station instruction and training kit , adas training workbench , power electronics demonstration bench , cut sectional workbench of ev components with stand, instruction board and table , tool box hand tools and safety tools for assembly and dismantling training , safety tool kit , wallchart banner and hoarding for demonstration and training ev , mixed domain oscilloscope with integrated spectrum analyzer, electric vehicle lab equipment, complete working 4-wheeler buggy simulator for ev training, demonstration, loading practice, data monitoring and troubleshooting., pmsm motor dynamometer with variable load for ev motor performance, regenerative system training, testing and data analysis., cut model of 2-wheeler e-scooty for hands-on training in vehicle assembly, disassembly, wiring, motor and electrical component troubleshooting., battery prototyping and manufacturing kit for hands-on battery pack assembly, testing, dismantling, bms practice and battery manufacturing activities., battery pack tester for charging, discharging, cycling, testing and analysis of ev battery packs., battery management training system for practical study of battery pack charging, discharging, monitoring, protection, bms operation and parameter measurement., charging station instruction and training kit for practical learning of ev ac charging, safety, energy monitoring, charging control and diagnostics., adas training workbench for hands-on demonstration and training of advanced driver assistance, vehicle telemetry, iot monitoring and related functions., power electronics demonstration bench for practical training in ev motor drives, power conversion, semiconductor devices, firing circuits, pwm and motor loads., cut sectional ev component workbench for hands-on visualization and understanding of the construction and functioning of major ev motors, controllers, battery and other subsystems., tool box containing hand tools and safety tools required for ev assembly, dismantling, maintenance and practical training activities., safety tool kit containing essential personal protective and emergency safety equipment for ev laboratory training and practical work., wallcharts, banner and hoarding for ev laboratory demonstration and training, providing visual learning content and laboratory branding., minimum 2-channel mixed domain oscilloscope with up to 1 ghz bandwidth, 5 gs/s sampling rate, 10 mpoints record length, integrated spectrum analyzer up to 1 ghz, hd touchscreen display and minimum 2 nos. 10x passive probes. suitable for ev and power electronics laboratory applications.

T18 Ref No : 17545933

Location : darbhanga , bihar

Source : GEM Tenders

LIVE TENDER

Agency / Dept :

department of science and technology DST

Due Date :

Oct 15, 2026 (Expire Today)

Tender Value :

Refer Document

corrigendum tender for quad copter 450 to 500mm class frame kit , brushless motor , esc 40a, 4s , flight controller , propellers 10 by 4.5 inch set , power distribution board, high current , power module , shock absorber set , lipo battery, 4s, 5200mah , radio transmitter and receiver,10 channel , gps and compass module , telemetry kit , wiring, connectors set , lipo battery charger, 4s, balance or multi-port, 450 to 500 mm class quad copter development and assembly kit, carbon fibre or composite quadcopter frame, 450 to 500mm wheelbase, fixed or foldable arm design, integrated fc or pdb mounting deck, frame weight less than or equal to 450g, payload capacity greater than or equal 800 gm., brushless outrunner motor, 850 to 1050 kv rated for 4s operation on 450 to 500mm class frames, continuous current greater than or equal 20a, max thrust greater than or equal 1.2kg with 1045 propeller., blheli-compatible esc, continuous current rating 40a, input 4s lipo., 32-bit arm cortex-m7 or better processor, open-source autopilot firmware compatible (ardupilot/px4), integrated barometer, minimum 4 uart ports + 1 can port, microsd logging, safety switch & buzzer included, supply voltage 4.3 to 5.4v., 10 by 4.5 inch propellers, factory-balanced cw/ccw pair per set, glass-fibre-reinforced nylon construction, adapter included., high current pdb, continuous rating greater than or equal 100a, supports 4s to 6s input, multiple esc solder pads, integrated capacitor for voltage spike protection., voltage & current sensing power module compatible with pixhawk/cube-series flight controllers, input 4s to 6s lipo, regulated 5.3v/3a output to fc, analogue voltage/current sensing output., anti vibration rubber/silicone ball dampers for flight controller isolation, set of 4 per unit, temperature resistant, load rating suitable for 450mm to 500 mm class frame., 4s lipo battery, capacity 5200mah, minimum continuous discharge rate 35c, xt60 connector with balance lead., 2.4ghz spread spectrum radio system, minimum 10 channels, telemetry capable, control range greater than or equal to 1.5km line of sight, mode 2 configuration, ppm/sbus/ibus compatible receiver output., gnss module with integrated compass, update rate greater than or equal to 5hz, uart interface, compatible with listed flight controllers., air to ground telemetry radio pair, operating frequency 433mhz or 915mhz (region appropriate / as per applicable spectrum regulations), range greater than or equal to 1km, baud rate up to 57600bps, usb & uart interface, compatible with mission planner/ground control., xt60 connectors, silicone insulated wire (12 to 14 awg), bullet connectors (3.5/4/5.5mm), heat shrink tubing assortment, cable ties and mounting hardware kit., ac/dc input balance charger, compatible with 4s to 6s lipo batteries, minimum charge current 10a per port (adjustable), capable of simultaneously charging minimum 2 batteries per unit via built-in multi-port or bundled parallel-charging board, charge rate selectable up to minimum 1c for 5200mah packs, built-in balance-charging/cell-voltage monitoring, over-charge/over-discharge/short-circuit protection, lcd/display showing voltage, current and charge status, xt60-compatible output leads with balance-lead adapter.

T18 Ref No : 17759144

Location : kollam , kerala

Source : GEM Tenders

LIVE TENDER

Agency / Dept :

Due Date :

Oct 16, 2026 (1 day left)

Tender Value :

T18 Ref No : 17759148

Location : kollam , kerala

Source : GEM Tenders

LIVE TENDER

Agency / Dept :

Due Date :

Oct 16, 2026 (1 day left)

Tender Value :

Tender For FPV Drone Assembly Kit , Fixed Wing Aircraft Assembly Kit , Quadcopter Training Assembly Kit , Industrial FDM 3D Printer with Multi Material System , High Performance Desktop PCs , Drone Flight Simulator Stations , FPV Headsets oblique Goggles , Drone Maintenance Tool Kit , LED Backlit Educational Wall Charts , Drone Simulator Software , KVM Switch 16 port , Networking of LAN , Drone Obstacle , Freight comma Installation comma Integration comma Testing comma Commissioning and Training, DRONE TRAINING LABORATORY, Carbon fiber FPV drone kit with H7 flight controller comma 900KV motors comma 55A ESC comma GPS comma 6S battery comma FPV camera comma RC transmitter comma goggles and charger, Fixed wing UAV kit with 1300 1400mm wingspan comma GPS autopilot comma FPV camera comma telemetry comma 4S LiPo battery comma autonomous flight modes and complete assembly hardware, Modular UAV training kit with 32 bit flight controller comma 900KV motors comma 30 40A ESC comma 3S LiPo battery comma FPV camera comma 2 point 4GHz radio system comma assembly toolkit and training manuals, Enclosed CoreXY FDM printer with 256x256x256mm build volume comma 300 degree C hotend comma multi material printing unit and engineering grade filament support, Intel Core i5 oblique i7 or Ryzen equivalent comma 16 oblique 32 GB RAM comma dedicated graphics comma SSD storage comma Windows 11 and dual display support, Professional UAV simulator supporting multirotor comma fixed wing and FPV training with multiplayer networking comma mission planning and instructor monitoring, 5 point 8GHz diversity FPV goggles with integrated display comma low latency reception and adjustable head strap, Soldering station comma hex keys comma screwdrivers comma pliers comma wrench comma LiPo checker and maintenance accessories in carrying case, 5ft x 3ft illuminated UAV training charts with technical graphics comma SOPs and safety information, UAV simulation software with mission planning comma multiplayer training comma instructor control comma assessment and reporting features, A 16 port KVM switch manages signal routing through hardware level hotkeys and graphical On Screen Displays, Cat6 UTP solid copper structured cabling comma 16 Port rack patch panel with keystone, Drone Obstacle Course consisting of training gates comma rings comma tunnels comma and barriers for enhancing drone pilot navigation comma maneuvering and flying skills, Supply comma installation comma integration comma testing comma commissioning comma documentation and operator training

T18 Ref No : 17399877

Location : PITHORAGARH , uttarakhand

Source : GEM Tenders

Agency / Dept :

Due Date :

Oct 03, 2026

Tender Value :

Refer Document

tender for decentralized telemetry link-100 , high-capacity storage reservoir-8s , solenoid actuator release module , centralized processing interface-80 , low-lux imagery transducer-v1 , wide-band signal transceiver-3 , composite load frame architecture-13 , electromagnetic torque transducer-42 , high-velocity airfoil matrix-13 , ephemeris position tracking transducer , sintered polymer structural interface , dual-spectrum operator interface matrix , mechanical harness retention band, accessories of monitoring and intrusion detection system, decentralized telemetry link-100, high-capacity storage reservoir-8s, solenoid actuator release module, centralized processing interface-80, low-lux imagery transducer-v1, wide-band signal transceiver-3, composite load frame architecture-13, electromagnetic torque transducer-42, high-velocity airfoil matrix-13, ephemeris position tracking transducer, sintered polymer structural interface, dual-spectrum operator interface matrix, mechanical harness retention band

T18 Ref No : 17466948

Location : baramulla , jammu & kashmir

Source : GEM Tenders

Agency / Dept :

Due Date :

Oct 05, 2026

Tender Value :

Refer Document

tender for kinetic release transducer node , orbital telemetry positioning node , helical polarization array-v2 , tactical platform skeletal grid-13 , visual spectrum sensor core-1 , spectral signal transmission node , high-frequency command interception module , high-density electrochemical matrix-10k , high-torque propulsion assembly-42 , kinetic thrust assembly matrix , high- ampere avionics matrix-80 , high-tensile energy cell retention band , additive manufactured structural mounts , multi-frequency ground control interface, accessories of monitoring and and remote control system equipment, kinetic release transducer node, orbital telemetry positioning node, helical polarization array-v2, tactical platform skeletal grid-13, visual spectrum sensor core-1, spectral signal transmission node, high-frequency command interception module, high-density electrochemical matrix-10k, high-torque propulsion assembly-42, kinetic thrust assembly matrix, high-ampere avionics matrix-80, high-tensile energy cell retention band, additive manufactured structural mounts, multi-frequency ground control interface

T18 Ref No : 17466984

Location : baramulla , jammu & kashmir

Source : GEM Tenders

Agency / Dept :

Due Date :

Oct 05, 2026

Tender Value :

Refer Document

T18 Ref No : 17498780

Location : kollam , kerala

Source : GEM Tenders

Agency / Dept :

Due Date :

Oct 13, 2026

Tender Value :

tender for quad copter 450 to 500mm class frame kit , brushless motor , esc 40a, 4s , flight controller , propellers 10 by 4.5 inch set , power distribution board, high current , power module , shock absorber set , lipo battery, 4s, 5200mah , radio transmitter and receiver,10 channel , gps and compass module , telemetry kit , wiring, connectors set , lipo battery charger, 4s, balance or multi-port, 450 to 500 mm class quad copter development and assembly kit, carbon fibre or composite quadcopter frame, 450 to 500mm wheelbase, fixed or foldable arm design, integrated fc or pdb mounting deck, frame weight less than or equal to 450g, payload capacity greater than or equal 800 gm., brushless outrunner motor, 850 to 1050 kv rated for 4s operation on 450 to 500mm class frames, continuous current greater than or equal 20a, max thrust greater than or equal 1.2kg with 1045 propeller., blheli-compatible esc, continuous current rating 40a, input 4s lipo., 32-bit arm cortex-m7 or better processor, open-source autopilot firmware compatible (ardupilot/px4), integrated barometer, minimum 4 uart ports + 1 can port, microsd logging, safety switch & buzzer included, supply voltage 4.3 to 5.4v., 10 by 4.5 inch propellers, factory-balanced cw/ccw pair per set, glass-fibre-reinforced nylon construction, adapter included., high current pdb, continuous rating greater than or equal 100a, supports 4s to 6s input, multiple esc solder pads, integrated capacitor for voltage spike protection., voltage & current sensing power module compatible with pixhawk/cube-series flight controllers, input 4s to 6s lipo, regulated 5.3v/3a output to fc, analogue voltage/current sensing output., anti vibration rubber/silicone ball dampers for flight controller isolation, set of 4 per unit, temperature resistant, load rating suitable for 450mm to 500 mm class frame., 4s lipo battery, capacity 5200mah, minimum continuous discharge rate 35c, xt60 connector with balance lead., 2.4ghz spread spectrum radio system, minimum 10 channels, telemetry capable, control range greater than or equal to 1.5km line of sight, mode 2 configuration, ppm/sbus/ibus compatible receiver output., gnss module with integrated compass, update rate greater than or equal to 5hz, uart interface, compatible with listed flight controllers., air to ground telemetry radio pair, operating frequency 433mhz or 915mhz (region appropriate / as per applicable spectrum regulations), range greater than or equal to 1km, baud rate up to 57600bps, usb & uart interface, compatible with mission planner/ground control., xt60 connectors, silicone insulated wire (12 to 14 awg), bullet connectors (3.5/4/5.5mm), heat shrink tubing assortment, cable ties and mounting hardware kit., ac/dc input balance charger, compatible with 4s to 6s lipo batteries, minimum charge current 10a per port (adjustable), capable of simultaneously charging minimum 2 batteries per unit via built-in multi-port or bundled parallel-charging board, charge rate selectable up to minimum 1c for 5200mah packs, built-in balance-charging/cell-voltage monitoring, over-charge/over-discharge/short-circuit protection, lcd/display showing voltage, current and charge status, xt60-compatible output leads with balance-lead adapter.

T18 Ref No : 17498962

Location : kollam , kerala

Source : GEM Tenders

Agency / Dept :

Due Date :

Oct 13, 2026

Tender Value :