sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

27Latest Steel scraper Tenders List

Latest Steel scraper Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Steel scraper tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Steel scraper tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Steel scraper Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Steel scraper tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Steel scraper Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Steel scraper Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Steel scraper Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Steel scraper tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Steel scraper Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Steel scraper sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Steel scraper tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Steel scraper tenders.

Is EMD mandatory for all Steel scraper tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Steel scraper work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Steel scraper tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Steel scraper Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16990491
Location : budgam , jammu & kashmir
Source : GEM Tenders
NEW TENDER
tender for 293073 double cylinder , 228379 hex head bolt , 282022 eye bolt , 208183 hex head nut , 206481 washer , 202168 dowel pin , 284492 hydraulic hose , 20643906 steel scraper blade , 206452 hex hd nut , 29902610 volkollen scrapper blade, बीीओ यूशीीषक /boq title, double cylinder, hex head bolt, eye bolt, hex head nut, washer, dowel pin, hydraulic hose, steel scraper blade, hex hd nut, volkollen scrapper blade
Agency / Dept :
border road organisation BRO
Due Date :
Sep 07, 2026 (9 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16812147
Location : secunderabad , telangana
Source : GEM Tenders
LIVE TENDER
tender for try square 10 cm blade , straight scriber 15 cm , hacksaw frame fixed 30 cm , safety goggles , caliper 15 cm hermaphrodite , divider 15 cm spring , screw driver 15 cm , cold chisel flat 12mm , ball pane hammer 450 gm with handle. , ball pane hammer bal 220 gm with handle , half round file 15 cm llnd cut , dot punch 10 cm , file cant saw 15 cm smooth , file round 20 cm 2nd cut , file square 15 cm 2nd cut , feeler gauge 10 blades , file triangular 20 cm 2nd cut , file swiss type needle set of 12 , file half round 25 cm iind cut , file card , stone oil 15 cm x 5 cm x 2point5 cm , oil can 250ml , spanner metric d e set of 10 pieces , interchangeable ratchet socket set 12 mm driver , box spanner 6 25 mm set of 8 with tommy bar , clamp toolmaker 5 cm and 7point5 cm set of 2 , clamp c 5 cm , hand reamer adjustable cover max 9 12 i8mm set of 3 , hand reamer taper 4 to 9 mm set of 6 or 4 to 7 mm set of 4 , reamer parallel 12 to 16mm set of 5 , scraper flat 15cm , scraper half round 15 cm , chisel cold 9 mm diamond , chisel cold 9 mm cross cut , chisel cold 19mm flat , chisel cold 9 mm round nose , extractor stud ezy out , set combination 30 cm , micrometer 0to25mm out side , micrometer 25to50mm out side with 25 mm test piece , micrometer 50to75mmout side with 50mm test piece , micrometer in side 25to50mm , vernier caliper 20 cm , vernier height gauge 30 cm , vernier bevel protractor , screw pitch gauge , wire gauge metric standard , drill twist taper shank 6mm to 25 mmx1point5 , drill chuck 12mm , wheel dresser 1 for 4 units , machine vice 10cm , sleeve drill morse 0to1 1to2 2to3 , leg vice 10cm jaw , wing compass 25point4cm or 30cm , radius gauges assorted 7 to 15 mm , dial test indicator 0point01 mm , magnetic stand for dti , counter sinking tool , rule steel 30 cm to read metric , rule steel 60 cm , straight edge 45 cm steel , surface plate 45x45 cm cl per granite , marking table 91x91x122 cm , universal scribing block 22 cm , v block pair 7 cm and 15 cm with clamps , square adjustable 15 cm blade , angle plate 10x20 cm , spirit level 15cm metal , portable hand drill electric 0 to 6 mm 550 watt , twist drill straight shank 15 to 12 mm by 1by2 mm , twist drill straight shank 8 mm to 15 mm by 1by2 mm , taps and dies complete set in box b a , taps and dies complete set in box width worth , taps and dies complete set in box 3to18 mm set of 10 , pipe wrench 40cm , pipe wrench 30 cm , pipe vice 100mm , adjustable pipe tap set bsp with die set cover pipe size 15 20 25 32 38 50mm , gauge slip as johnson metric set , carbide wear block 0 lmm 02mm , gauge snaps go and no go 25 to 50mm by 5mm set of 06pcs , gauge plug single ended 05 to 55 by 5mm set of 1 pcs , gauge telescopic up to 150mm , dial vernier caliper 0 to 200mm lc00point05mm universal type , vernier micrometer 0 to 50 mm , depth micrometer 0to 100mm 0point01mm , vernier caliper 150mm lc 0point02mm , comparators stand with dial indicator indicator lc 0point01 mm , engineers try square knife edge 150mm blade , surface roughness comparison plates n1 n12 grade , digital vernier caliper 20cm , digital outside micrometer 0 to 25mm , digital dial test indicator , straight snips 250by300mm , bend snips 250by300mm , swage block , sine bar 125mm , sine bar 250mm , surface roughness tester, raw material for fitter trade nstiv, try square 10 cm blade, straight scriber 15 cm, hacksaw frame fixed 30 cm, safety goggles, caliper 15 cm hermaphrodite, divider 15 cm spring, screw driver 15 cm, cold chisel flat 12mm, ball pane hammer 450 gm with handle., ball pane hammer bal 220 gm with handle, half round file 15 cm llnd cut, dot punch 10 cm, file cant saw 15 cm smooth, file round 20 cm 2nd cut, file square 15 cm 2nd cut, feeler gauge 10 blades, file triangular 20 cm 2nd cut, file swiss type needle set of 12, file half round 25 cm iind cut, file card, stone oil 15 cm x 5 cm x 2point5 cm, oil can 250ml, spanner metric d e set of 10 pieces, interchangeable ratchet socket set 12 mm driver, box spanner 6 25 mm set of 8 with tommy bar, clamp toolmaker 5 cm and 7point5 cm set of 2, clamp c 5 cm, hand reamer adjustable cover max 9 12 i8mm set of 3, hand reamer taper 4 to 9 mm set of 6 or 4 to 7 mm set of 4, reamer parallel 12 to 16mm set of 5, scraper flat 15cm, scraper half round 15 cm, chisel cold 9 mm diamond, chisel cold 9 mm cross cut, chisel cold 19mm flat, chisel cold 9 mm round nose, extractor stud ezy out, set combination 30 cm, micrometer 0to25mm out side, micrometer 25to50mm out side with 25 mm test piece, micrometer 50to75mmout side with 50mm test piece, micrometer in side 25to50mm, vernier caliper 20 cm, vernier height gauge 30 cm, vernier bevel protractor, screw pitch gauge, wire gauge metric standard, drill twist taper shank 6mm to 25 mmx1point5, drill chuck 12mm, wheel dresser 1 for 4 units, machine vice 10cm, sleeve drill morse 0to1 1to2 2to3, leg vice 10cm jaw, wing compass 25point4cm or 30cm, radius gauges assorted 7 to 15 mm, dial test indicator 0point01 mm, magnetic stand for dti, counter sinking tool, rule steel 30 cm to read metric, rule steel 60 cm, straight edge 45 cm steel, surface plate 45x45 cm cl per granite, marking table 91x91x122 cm, universal scribing block 22 cm, v block pair 7 cm and 15 cm with clamps, square adjustable 15 cm blade, angle plate 10x20 cm, spirit level 15cm metal, portable hand drill electric 0 to 6 mm 550 watt, twist drill straight shank 15 to 12 mm by 1by2 mm, twist drill straight shank 8 mm to 15 mm by 1by2 mm, taps and dies complete set in box b a, taps and dies complete set in box width worth, taps and dies complete set in box 3to18 mm set of 10, pipe wrench 40cm, pipe wrench 30 cm, pipe vice 100mm, adjustable pipe tap set bsp with die set cover pipe size 15 20 25 32 38 50mm, gauge slip as johnson metric set, carbide wear block 0 lmm 02mm, gauge snaps go and no go 25 to 50mm by 5mm set of 06pcs, gauge plug single ended 05 to 55 by 5mm set of 1 pcs, gauge telescopic up to 150mm, dial vernier caliper 0 to 200mm lc00point05mm universal type, vernier micrometer 0 to 50 mm, depth micrometer 0to 100mm 0point01mm, vernier caliper 150mm lc 0point02mm, comparators stand with dial indicator indicator lc 0point01 mm, engineers try square knife edge 150mm blade, surface roughness comparison plates n1 n12 grade, digital vernier caliper 20cm, digital outside micrometer 0 to 25mm, digital dial test indicator, straight snips 250by300mm, bend snips 250by300mm, swage block, sine bar 125mm, sine bar 250mm, surface roughness tester
Agency / Dept :
directorate general of training
Due Date :
Sep 07, 2026 (9 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16812310
Location : jodhpur , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for cut , file flat 300 mm second cut , file flat 200 mm bastard , file flat 300 mm bastard , file swiss type needle set of 12 , file half round 250 mm second cut , file half round 250 mm bastard , file round 250 mm bastard , file hand 150 mm second cut , file card wire brush , oil can 250 ml , plier combination insulated 150 mm , wooden handle forged soldering iron copper bit , blow lamp 500 ml , spanner double ended set of 8 pcs , spanner adjustable 150 mm , interchangeable ratchet socket set with 12 mm driver , double ended tubular box spanner set with tommy bar , glass magnifying 75 mm , clamp tool maker 50 mm , clamp tool maker 75 mm , c-clamp 100 mm , c-clamp 200 mm , reamer hand set pin taper straight flute , reamer machine parallel helical flute , scraper flat 150 mm , scraper triangular 150 mm , scraper half round 150 mm , chisel cold 9 mm x150 mm cross cut , chisel cold 9 mm x 150 mm diamond , chisel cold flat 9 mm x 100 mm , chisel cold 9 mm x 100 mm round nose , drill chuck 12 mm with key , pipe wrench 400 mm , pipe vice 100 mm , adjustable pipe die set b.s.p , wheel dresser , vice machine 100 mm jaw swivel base , vice machine 125 mm swivel base , sleeve drill morse , vice bench 150 mm jaw , bench working 2400 x 1200 x 900 mm , almirah 1800 x 900 x 450 mm , lockers with 12 drawers standard size , metal rack 1820 x 900 x 450 mm , instructor table , instructor chairs , black board with easel , fire extinguisher , fire buckets with stand , vice machine 100 mm jaw , wing compass 300 mm , hammer hand 1 kg. with handle , torque wrench 14 to 68 nm ratchet type , power tools for fastening capacity 10-18mm , different profile gauges plate type for demonstration , knurling tool diamond , knurling tool straight and diagonal , indexable boring bar with inserts , temperature gauge range , dowel pin straight , standard tap screws , lapping plate dia , metric drill gauge , letter drill gauge , number drill gauge , cast iron globe valve flanged type , c.i. sluice gate valve flanged type , stop cock , slip-on forged steel flange , pipe threading die with handle , pulleys for v-belt or flat belt , v- belt and flat belt , washer, clutch, keys, jib, cotter and circlips , hollow punch , bearing different types , lifting sling , bearing extractor , pulley extractor , trammel 300 mm , punch prick , mallet , aviation snip straight cut 300 mm , hammer flat headed with handle , hammer planishing , snip bent left cut 250 mm , stake hatchet with leg , stake grooving , gauge slip metric as johnson set , gauge snap go and not go 25 to 50 mm by 5mm set of 6 pcs , gauge plug single ended 5 to 55 by 5 mm set of 11 piece , gauge telescopic 8 to 150 mm , dial test indicator on stand , sine bar 125 mm , dial vernier caliper universal type , screw thread micrometer , depth micrometer , digital vernier caliper , digital micrometer , comparator gauge , engineer try square , surface roughness comparison , vernier bevel protractor , carbide wear block , lathe tools h.s.s. , lathe tools bit , arm strong type tool bit holder , stilson wrenches , pipe cutter wheel type , pipe bender spool type with stand manually , adjustable pipe chain tong to take pipes , spanner adjustable , s.s. and s.c. centre lathe , drilling machine pillar sensitive , drilling machine bench sensitive , d.e. pedestal grinding machine , transformer welding set 300 amps , welding cable , lugs for cable , earth clamps , arc welding table , oxy- acetylene gas welding set , gas welding table with, lab of fitter trade, steel rule 150mm with metric and british graduation, try square 150mm blade, caliper inside 150mm spring, caliper 150mm hermaphrodite spring type, caliper outside 150mm spring, divider spring joint 150mm, scriber 150mm multiple 5mm, punch centre 120mm multiple 10mm, screw driver 150mm multiple 6mm, chisel cold flat 20mm multiple 150mm, hammer ball peen 450 gm, hammer ball peen220 gm, file flat 250 mm second cut, file flat 250 mm smooth, file half round 150 mm second cut, hacksaw frame fixed 300mm, safety goggles plain, punch dot 100 mm, steel rule graduated both in metric and english unit, straight edge steel, spirit level 300 mm, stud extractor, combination set 300 mm, micrometer outside 0 to 25 mm, micrometer outside 25 to 50 mm, micrometer outside 50 to 75 mm, micrometer inside with extension rods, vernier caliper 150 mm, vernier height gauge 300 mm, vernier bevel protractor blade with acute angle attachment, screw pitch gauge, wire gauge metric standard, surface plate 600 multiple 600 mm c.i. granite with stand and cover, marking table 900 multiple 900 multiple 900 mm mild steel, universal scribing block 220 mm, v-block pair 150 multiple 100 multiple 100 mm with clamp, angle plate 150 multiple 150 multiple 250 mm, punch letter set, punch number set, portable hand electric drill machine 0 to 13 mm capacity, drill twist straight shank 3 to 13 mm by 0.5 mm, drill twist taper shank 8 mm to 20 mm by 0.5 mm, taps and dies complete set in a box, taps and dies complete set in box set of 05, file knife edge 150 mm smooth, file feather edge 150 mm smooth, file triangular smooth 200 mm, file round 200 mm second cut, file square 250 mm second cut, gauge feeler, file triangular 200 mm second cut, file flat 300 mm second cut, file flat 200 mm bastard, file flat 300 mm bastard, file swiss type needle set of 12, file half round 250 mm second cut, file half round 250 mm bastard, file round 250 mm bastard, file hand 150 mm second cut, file card wire brush, oil can 250 ml, plier combination insulated 150 mm, wooden handle forged soldering iron copper bit, blow lamp 500 ml, spanner double ended set of 8 pcs, spanner adjustable 150 mm, interchangeable ratchet socket set with 12 mm driver, double ended tubular box spanner set with tommy bar, glass magnifying 75 mm, clamp tool maker 50 mm, clamp tool maker 75 mm, c-clamp 100 mm, c-clamp 200 mm, reamer hand set pin taper straight flute, reamer machine parallel helical flute, scraper flat 150 mm, scraper triangular 150 mm, scraper half round 150 mm, chisel cold 9 mm x150 mm cross cut, chisel cold 9 mm x 150 mm diamond, chisel cold flat 9 mm x 100 mm, chisel cold 9 mm x 100 mm round nose, drill chuck 12 mm with key, pipe wrench 400 mm, pipe vice 100 mm, adjustable pipe die set b.s.p, wheel dresser, vice machine 100 mm jaw swivel base, vice machine 125 mm swivel base, sleeve drill morse, vice bench 150 mm jaw, bench working 2400 x 1200 x 900 mm, almirah 1800 x 900 x 450 mm, lockers with 12 drawers standard size, metal rack 1820 x 900 x 450 mm, instructor table, instructor chairs, black board with easel, fire extinguisher, fire buckets with stand, vice machine 100 mm jaw, wing compass 300 mm, hammer hand 1 kg. with handle, torque wrench 14 to 68 nm ratchet type, power tools for fastening capacity 10-18mm, different profile gauges plate type for demonstration, knurling tool diamond, knurling tool straight and diagonal, indexable boring bar with inserts, temperature gauge range, dowel pin straight, standard tap screws, lapping plate dia, metric drill gauge, letter drill gauge, number drill gauge, cast iron globe valve flanged type, c.i. sluice gate valve flanged type, stop cock, slip-on forged steel flange, pipe threading die with handle, pulleys for v-belt or flat belt, v-belt and flat belt, washer, clutch, keys, jib, cotter and circlips, hollow punch, bearing different types, lifting sling, bearing extractor, pulley extractor, trammel 300 mm, punch prick, mallet, aviation snip straight cut 300 mm, hammer flat headed with handle, hammer planishing, snip bent left cut 250 mm, stake hatchet with leg, stake grooving, gauge slip metric as johnson set, gauge snap go and not go 25 to 50 mm by 5mm set of 6 pcs, gauge plug single ended 5 to 55 by 5 mm set of 11 piece, gauge telescopic 8 to 150 mm, dial test indicator on stand, sine bar 125 mm, dial vernier caliper universal type, screw thread micrometer, depth micrometer, digital vernier caliper, digital micrometer, comparator gauge, engineer try square, surface roughness comparison, vernier bevel protractor, carbide wear block, lathe tools h.s.s., lathe tools bit, arm strong type tool bit holder, stilson wrenches, pipe cutter wheel type, pipe bender spool type with stand manually, adjustable pipe chain tong to take pipes, spanner adjustable, s.s. and s.c. centre lathe, drilling machine pillar sensitive, drilling machine bench sensitive, d.e. pedestal grinding machine, transformer welding set 300 amps, welding cable, lugs for cable, earth clamps, arc welding table, oxy-acetylene gas welding set, gas welding table with positioner, welding torch tips, trolley for gas cylinders, hammer chipping 300g, gloves leather, leather apron, spindle key for cylinder valves, welding torches, welding goggles, welding helmet, tip cleaner, pneumatic trainer kit, hydraulic trainer kit
Agency / Dept :
department of technical education DTE
Due Date :
Sep 07, 2026 (9 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16854181
Location : haldwani , uttarakhand
Source : GEM Tenders
LIVE TENDER
tender for fitter trade hand tools and equipment - steel rule with metric british graduation , caliper outside spring type , hammer ball peen with handle , file flat second cut , file half round second cut , hacksaw frame fixed type , safety goggles , straight edge steel , vernier caliper , punch letter set , drill twist straight shank , drill twist taper shank , file feather edge smooth , file triangular smooth , file round second cut , file square second cut , file triangular second cut , file flat second cut safe edge , file flat bastard , file half round bastard , file round bastard , file hand second cut , wire brush , wooden handle forged soldering iron copper bit , hand reamer set taper pin straight flute , machine reamer parallel helical flute , scraper flat , scraper triangular , scraper half round , chisel cold crosscut diamond point , chisel cold flat , chisel cold round nose , drill chuck with key , wheel dresser , lockers with 8 drawers , metal rack , instructor table , instructor chair , black board with easel , torque wrench , power tools for fastening , different profile gauges , knurling tool diamond straight diagonal , indexable boring bar with inserts , temperature gauge , dowel pin straight , standard tap screws , lapping plate , medium carbon heat treated alloy steel metric studs and bolts along with nuts , caps screws , drill gauges , cast iron globe valve , stop cock , slip on forged steel flange , pipe threading die with handle , jigs fixture , pulleys for v belt or flat belt , steel keys , damaged old spur gear , v belt and flat belt , packing gasket , washer clutch keys jib cotter circlip , hollow punch , drill drift , bearing different types , lifting sling , bearing extractor , pulley extractor , mallet , aviation snips straight cut , flat headed hammers with handle , snip bent left cut , slip gauge as johnson metric set , dial vernier caliper , screw thread micrometer , digital micrometer outside , engineers try square , carbide wear block , arm strong type tool bit holder , pipe bender machine , pneumatic trainer kit , carrier for mounting components such as pb relay boxes , cut section model for pneumatic components , hydraulic trainer kit , hydraulic workstation , cut section models for hydraulic components, as per specification
Agency / Dept :
department of personnel and training
Due Date :
Sep 01, 2026 (3 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16933397
Location : pune , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for supply of furniture kitchen crockery linen and elctronic gadgets etc title 1 , title 2 , title 3 , title 4 , title 5 , title 6 , title 7 , title 8 , title 9 , title 10 , title 11 , title 12 , title 13 , title 14 , title 15 , title 16 , title 17 , title 18 , title 19 , title 20 , title 21 , title 22 , title 23 , title 24 , title 25 , title 26 , title 27 , title 28 , title 29 , title 30 , title 31 , title 32 , title 33 , title 34 , title 35 , title 36 , title 37 , title 38 , title 39 , title 40 , title 41 , title 42 , title 43 , title 44 , title 45 , title 46 , title 47 , title 48 , title 49 , title 50 , title 51 , title 52 , title 53 , title 54 , title 55 , title 56 , title 57 , title 58 , title 59 , title 60 , title 61 , title 62 , title 63 , title 64 , title 65 , title 66 , title 67 , title 68 , title 69 , title 70 , title 71 , title 72 , title 73 , title 74 , title 75 , title 76 , title 77 , title 78 , title 79 , title 80 , title 81 , title 82 , title 83 , title 84 , title 85 , title 86 , title 87 , title 88 , title 89 , title 90 , title 91 , title 92, full plate steel, rice plate ss, donga steel with lid plain, table spoon ss, serving spoon ss, tea spoon ss, rice spoon ss, peeler, khalbatta, cup & saucer mat finish, tray acrylic large, glass ss, flask 02 cups eagle, casserole 6 ltr cap milton, casserole 10 ltr cap milton, aluminium tray big size, tray ss big size, butter jam tray set, pickle tray set, basket for vegetable plastic, tawa iron, tawa aluminium, sieves atta circular, bundi jhara, bottle opener, coconut scraper, forcepts ss, fridge bottles, gas lighter, idli cooker 36 ltr cap, karchi various type, kitchen knives, masala box ss, table mat 6 pcs set, fry pan nirlap, pakad, parat ss for 20 persons, patila with lid assorted sizes, patila with lid big sizes, pressure cooker 12 ltr cap, pressure cooker 5 ltr cap, pickle container ss, tea stainer, tea vessle ss, non stick tawa, water jug ss, coaster plate set of 6 pcs, storage container 5 kgs cap, storage container 2 kgs cap, storage container 1 kgs cap, gas stove 2 burner (sunflame), water purifier, kadai medium size aluminium, kadai medium size iron, kadai big size iron, mattress single size, foam pillow century, woolen blanket, bed sheet single, bed sheet single white color, pop up toaster, refrigerator minimum 400 ltr cap, wet grinder 2 ltr cap, alaram clock, wall clock, emergency light, smart tv 43 inch, fly killer or insect killer, mixture cum grinder, water cooler 40 ltr cap, desert cooler for dining hall, bucket plastic 20 ltr cap, mug plastic 2 ltr cap, mug plastic 1 ltr cap, door mat woolen, dust bin with lid plastic, floor cleaning brush, toilet clean brush, mosquito repellant machine, soap case, door mat coir, plastic chairs, plastic moulded center table, flower vaze bc, ash tray, plastic sheet cover for dining table, picture frame for display, water glass, bath/ hand towel, water jug plastic, sauce pan aluminium, hanger plastic
Agency / Dept :
defence research and development organisation DRDO
Due Date :
Sep 02, 2026 (4 days left)
Tender Value :
8.95L
View Documents
T18 Ref No : 16708474
Location : hyderabad , telangana
Source : GEM Tenders
LIVE TENDER
tender for alginate mixing spatula 8 inches , casting plaster powder 1 kg , disposable towel non woven 16 x 24 inches pack of 100 , flexible rubber mixing bowl large size , grit sanding sheets 9 x 11 inch , gypsum powder 1 kg , kitchen knife carbon steel blade with wood handle blade , knife blade sharpener rod , labrock laboratory dental stone type iii dark blue , low temperature thermoplastic sheet perforated 2 mm thickness , measuring jug 1 l graduated , paint brush set of 12 various sizes , petroleum jelly vaseline 85g , plaster cloth plaster gauze , plaster of paris bandage , plastic frosty mixing bowl microwave safe set of 4 pcs , silicone spatula set of 6 pcs non stick , sodium alginate powder 800g , spray bottle plastic 250 ml , ss measuring cups spoons with handles set of 8 , ss scraper spatula with brown handle set of 5 various sizes , vegetable cutting board large size wooden, consumables, as per specifications
Agency / Dept :
indian council of medical research ICMR
Due Date :
Sep 01, 2026 (3 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16448737
Location : sikar , rajasthan
Source : GEM Tenders
corrigendum tender for capacity 20 to 160 mm , cylinder liner dry and wet liner press fit and slide fit , depth micrometer 0 to 25 mm , dial gauge type 1 gr a complete with clamping devices and with magnetic stand , different type of engine bearing model , different types of piston model , dividers with spring 150 mm , drift punch copper 150 mm , drill point angle gauge , drill twist 1.5 mm to 15 mm various sizes by 0.5 mm , electric soldering iron 60 watt 230 v , electric soldering iron 25 watts 230 v , electric testing screw driver , engineers stethoscope , feeler gauge 20 blades metric , file flat bastard 200 mm , file half round second cut 200 mm , file square second cut 200 mm , file square rough 300 mm , file triangular second cut 150 mm , files assorted sizes and types including safe edge file 20 nos , flat file second cut 250 mm , flat file bastard 350mm , fuel injection pump diesel in line , fuel injection pump dismantling tool kit universal vice , fuel injection pumps ve pump distributor fuel rotary pump dpc pumps along with special tools and accessories , glow plug tester , surface plate l 1600 w 1000 mm c i granite with stand and cover , grease gun , growler , hacksaw frame adjustable type 200 to 300 mm , hammer ball pein 750 gm , hammer chipping 250 gm , hammer copper 1 kg with handle , hammer mallet , hand operated crimping tool wire up to 4 mm , hand operated crimping tool wire up to 10 mm , hand shear universal 250 mm , hollow punch set of seven pieces 6 mm to 15 mm , injector cleaning unit technical , injector testing set hand tester , lifting jack screw type 3 ton capacity , lifting jack screw type 5 ton capacity , lifting jack screw type 20 ton capacity , magnifying glass 75 mm , marking out table l 90 w 60 h 90 cm , multi meter digital , oil pump gear type pump for lmv , oil pump rotor type pump for lmv , oil stone l 15 w 5 h 2.5 cm , oscilloscope 20 mhz , micrometer outside 50 to 75 mm , micrometer outside 75 to 100 mm , pipe flaring tool , piston ring compressor , pliers round nose 150 mm , portable electric drill machine , prick punch 150 mm , punch number 4 mm , rivet sets snap and dolly combined 3 mm 4 mm and 6 mm , scraper flat 250 mm , scraper half round 250 mm , scraper triangular 250 mm , scriber with scribing block universal , set of stock and dies metric , tinmans shear l 450 mm w 600 mm , sheet metal gauge , tinman s shear 300 mm , soldering copper hatchet type 500 gm , solid parallels in pairs different sizes in metric , spanner clyburn 150 mm , spanner t flocks for screwing up and up screwing inaccessible , spanner adjustable 150 mm , spark lighter , spark plug spanner l 14 mm w 18 mm size , steel rule 150 mm inch and metric , straight edge gauge 2 ft , straight edge gauge 4 ft , tachometer counting type , tandem master cylinder with booster working model , taps and dies complete sets b a , taps and dies bsw various type in inch , tap and dies set metric size 03 to 24 mm , taps and die set bsf various type in inch , taps and dies width worth fine , timing lighter new brand , torque wrenches 5 to 35 nm , torque wrenches 12 to 68 nm , torque wrenches 50 to 225 nm , tyre pressure gauge with holding nipple , universal puller , v block l 75 w 38 mm pair with clamps , valve lifter , valve spring compressor universal , vernier caliper 0 to 300 mm with least count 0 point 02 mm , water pump new brand , wire gauge metric , vices of 120 mm jaw , air conditioned crdi vehicle new brand lmv bs vi with abs and speed limiter , arbor press, mechanic diesel lab items, allen key set of 12 pieces with hex key sizes 2 to 14 mm made from forged steel alloy carbon steel, caliper inside 150mm spring made of carbon steel gauging point should be heat treated, centre punch 10mm dia x 100 mm round knurled body made of alloy steel gauging point should be heat treated, screw driver 250 x 9 mm flat tip size 8 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, properly heat treated., hammer ball pein, head weight 500 gm made from forged carbon steel, face heat treated. with wooden handle, hand file 200mm second cut, made of heat treated tool steel with wooden handle., philips screw driver 100 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip with neon tester., philips screw driver 150 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 200 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 250 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 300 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, pliers combination 200mm insulated with moulded sleeves of high voltage grade, made from drop forged alloy steel with side cutting facilities, properly heat treated., screw driver heavy duty 200mm x 9 mm flat tip size 9 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., screw driver heavy duty300mmx 9mm flat tip size 10 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., spanner d.e. 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanner ring 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanners socket with speed handle, t-bar, ratchet and universal up to 32 mm set of 28 pieces with box. made from forged carbon steel., steel rule 300 mm. metric, english both graduation made of stainless steel with conversion table engraved, as per drawing l 150 mm w 200 h 400, wire cutter & stripper 150 mm made of high carbon steel , wire stripping capacity up to 6mm, spanner adjustable 350 mm blade, made from alloy steel, workshop grade, 1 should be trigger operated blow gun with interchangeable nozzles with metal gun 2 fitted with brass air inlet ferrule 3 suitable for quick removal of chips, dust and particulate from any surface 4 operating pressure 80 to 150 psi 5 high pressure nozzle 6 safety nozzle adaptor 7 crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application 8 low pressure nozzle and supplied with manual, ammeter dc shunt type up to 300 amp the shunts are constructed from high grade managing, air ratchet with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box with manual, air impact wrench with 180 ft lb 244 nm max torque and 7100 rpm and a feather touch trigger two position forward power regulator and conveniently located forward reverse ring provide precise control with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box and manual will be provided. square drive half inch bolt size in the box 9 to 27 mm, angle plate size 200x100x200mm made from close grain c.i. workshop grade., anvil 50 kg. single horn type made from cast steel working face heat treated, face having hardie hole & punching hole, stand made from fabricated angle iron (50 x 50 x 6 mm) height 400 mm, alternator starter with minimum 2 hp ac motor digital auto electrical test bench checking for alternator and starter motor auto electrical test bench checking for alternator and starter motor mild steel frame work table top test bench 2 hp and 3 phase1440 rpm motor induction motor suitable for 50 hz 415 v ac supply with heavy duty transformer for starter testing with light run test variable frequency drive vfd overload capability 150 percentage of rated current 60 seconds built in pid simplify the establishment of a closed loop control system key lock and function selection communication port rs 485 4 point 3 inch colour hmi for indication for voltage and current 2 ch analogue input controlled via rs 485 bus utilizing modbus rtu protocol 1 channel dc current input with 75 mv input for shunt 1 channel dc voltage input 200vdc 1 construction of relay output 7a 230vac 2 leds for indicating the power status and signal trans receiving status capable to interface with pc attached with thermal printer communication interface rs485 rtu diode150 a 12 to 24 v 4 nos shunt 200a 75 mv transformer 12v 200 a 24 v 150 a 1 no transformer 0 to 240 v primary 12 to 0 to 12 v secondary 1 no mains supply 415 v ac 3 phase 50 hz ac power supply v belt heavy duty banana terminals on the front panel pulley groove for alternator checking heavy duty rugged vice for mounting alternator and starter operation manual should be provided, voltage 12v input volt 230v 50hz output volt 12 v dc capable for 5ah 35ah battery charged rotary swicth to select volt and amp ammeter display and main switch plus minus knob crocodile connector with wire 2 ft in length aligator clips high current charging upto 15 ampere circuit breaker for reverse battery auto cut off after charging, blow lamp capacity 1000ml body made from brass. with inclined burner type, should be used on vehicle belts where the manufacturer specifies the timing belt tension to be set at a specific location on the belt span between pulleys should have clear incremental markings with knurled knob for accurate measurement. should speed up timing belt installation .measurement range 0 to 80 kg 750 newton supplied in a foam inlay box, power supply electrical electrical cable m 5 mtr working pressure bar 8 to 12 kg cm2 hose length m 10 mtr suction and discharge each motor rpm 2800 rpm flow rate l h 8 to 12 lpm phase 1 phase 3 hp 230 volt suitable for cold water spray gun standard number of pistons plungers 3 pressure gauge auto stop facility for power saving suitable guns for water and foam sprey water filter pressure regulating valve for increasing and decreasing output pressure the operating unit should be mounted on a ms structure trolley type starter switch caster wheel 2 nos water pipe inlet and out let, automatic double pawl braking system capacity range 1- 3 ton fully forged hooks are fitted safety latches shield bearing zinc plated hand chain as standard standard lift 3 meter effort required to lift 3 ton load- 30 kg. with tripod stand & standard accessories., chisel flat 100mm, made of forged steel. point heat treated., circlip plier internal 150 mm drop forge alloy steel heat treatment moulded sleeve . ., circlip plier external 150 mm.drop forge alloy steel heat treatment moulded sleeve ., circlip plier internal 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., circlip plier external 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., clamps c 100mm, made of forged steel., clamps c 150mm, made of forged steel., clamps c 200mm, made of forged steel., tray cleaning 450 into 300mm -gi sheet 18 g side handle both border wires, 1 quickconnect adapter push pressure scale 0 1000 psi 0 7000 2 kpareads pressure from 0 to 1000 psi 3 2 to 9 by 16 diameter gauge 4 thumb button air release should be supplied with adapters for suzuki hyundai gm ford isuzu mercedes toyota volkswagen and peugeot compatible for dry test with adptor standard accessories all above items should be placed secured in a blow molded plastic box or metal box, connecting rod alignment fixture height of fixture 450mm connecting rod 40 to 100mm connecting rod alignment fixture checking bent twist offset precision ground surfaceshould be supplied with following accessories bent and twist indicator bending bar with alignerdial indicator and the connecting rod fixture ms iron should be fitted over a base etc with all accessory, soldering iron copper bit weight 250gm hatchet type with handle, cylinder gauge, bore dial gauge with accessories 20-160 mm least count 0.01 mm self cantering with interchangeable mounted head complete., technical specification cylinder liners of following types dry liner for engine cylinder press fit type wet liner for engine cylinder with rubber o ring slide fit liner piston with ringstandard features, micrometer depth 0 to 25mm lc 0 point 01mm carbide tipped on measuring face made from alloy steel complete in box, dial gauge indicator l.c. 0.1 mm ran- ge 10mm dial graduation 0-50-0 balance plunger type dial & holder. magnetic base with on-off switch, fine tolerance setting arm, stem dia. as per dial indicator, complete set in dial gauge., the model will made out of different type of engine bearing suitable for engine 1 shell bearing for crankshaft with main journal and big end journal 2 thrust bearing for crankshaft 3 ball bearing for crank shaft 4 bush bearing for connecting rod 5 needle bearing for connecting rod 6 bush bearing for camshaft & rocker arm 7 shell bearing for overhead cam shaft 8 needle bearing for rocker arm 9 name mention of each bearing on board, the model will be made out of different type of piston model. 01set concave head dome head flat head solid skirt recessed head light weight model for easy shifting. piston will be mounted on a wooden board name mentioned of each type the piston.and constructional diagram details printed on to a colourful panel with details of applications the item will be supplied in a dust proof box & covered by the acrylic sheet., divider spring joint 150mm, made of alloy steel., drift punch copper 150mm made by copper, drill point angle gauge made by drop forged steel., twist drill straight shank high speed steel 1.5 to 15mm by 0.5mm set 10pcs. high carbon steel &heat treated., soldering iron 60 watt, 230 v.a.c. standard length of mains lead with 3 pin top, bit made from copper., soldering iron 25 watt, 230 v,.a.c. standard length of mains lead with 3 pin top, bit made from copper., neon tester 500 volt heavy duty insulated. handle made from transparent cellulose acetate with plated metal clip. blades made from selected steel chrome & insulated., engineer s stethoscope with standard accessories, feeler gauge set of 20 blades metric, different sizes, length of blades 100 mm, made from alloy steel., file flat 200mm bastard made of heat treated tool steel with wooden handle., file half round 20cm second cut, made of heat treated tool steel with wooden handle., file square 200mm second cut, made of heat treated tool steel with wooden handle., file, square 300mm rough, made of heat treated tool steel with wooden handle., file triangular 150mm second cut, made of heat treated tool steel with wooden handle., files assorted sizes and types including safe edge file (20 nos), made high carbon/high speed steel. size (150 mm)., file flat 250mm second cut, made of heat treated tool steel with wooden handle., file flat 350mm bastard, made of heat treated tool steel with wooden handle., fuel injection pump (diesel) inline complete pump assembly suitable for 4/6 cylinders diesel engine rsv mechanical or pneumatic governor type the item will be supplied on suitable plywood and collared with attractive colour. a dust proof wooden box & covered by the acrylic sheet., fuel injection pump dismantling tool kit 1. universal vice 2. pre stroke setting attachment with gauge, 3. pump couplings, 4. control setting gauge with attachment, 5 .tappet adjusting spanner (thin),6. ring wrench,7. tappet lifter, 8. mechanical finger (gripper), 9. adapter capsule box for fip, 10. thread puller for fly weight, 11. drift for bottom plug, 12. impact screw driver, 13. flower/trox allen key set, 14. attachment for setting angle of accelerate lever, 15. coupling for fip cam, coupling wrench, 16. round nut spanner different type, 17. ve pump holding attachment, 18. inline and rotary pump holding attachments,19. drift for installing and removing oil seal, 20. holder spanner, 21. spring locking plates, 22. governor weight remover., fuel injection pump in diesel type distributor fuel rotary pump with dpc complete pump assembly compatible for 4 cylinders diesel pump operated by handle and constructional diagram details printed on to a colourful panel with details of applications will be supplied with along with all tools and special tools and accessories for dismantling and assembling fuel injection pump special tools 1 extra long socket 2 mounting stand for ve pump distributor fuel rotary pump dpc pumps 3 injection pump special socket 4. coapling for ve pump distributor fuel rotary pump dpc pumps 5 testing jig 6two pin spnner 7 huk spanner 8.pump nozzle refting tool, power input 8point 5 to 15 volt max current 80 ampere, surface plate made of closed grain seasoned cast iron/ granite 1600 mmx 1000 mm grade 1, with calibration test certificate, complete with top cover, side handle. m.s. fabricated standard height stand with leveling screws ., grease gun pressure type 500 gm. capacity hand operated, manufactured from tin plate with steel pump with fixed spot., growler general & internal set suitable to test d.c. armature and ac motor starter rating supply ac. 250volt 50hz., hacksaw frame adjustable type 200-300mm with blade & handle., hammer ball pein head weight 750gm made from forged carbon steel, face heat treated. wooden handle fitted, hammer chipping 250gm with handle, one side chisel and other side pointed end type hard and tempered, steel handle about 250 mm long., hammer copper forged head weight 1000gm with fibre glass handle,, hammer mallet head dia.100 mm. made from wood with handle., hand operated crimping tool for crimping up to 4 mm, hand operated crimping tool for crimping up to 10 mm, hand shear universal( straight snip ) 250 mm, made from drop forge steel. cutting edge hard & tempered., punch hollow, hole dia 6 to 15 mm set of 7 pieces made from alloy steel, main unit power supply ac 220v plus minus 10 percent 50hz ultrasonic cleaner power 30 to 50w ultrasonic bath inner body material stainless steel simulated rpm range 10 to 9990 rpm step 10 rpm time range 1 to 9999 pulse width 0 point 5 to 25 ms step 0 point 1ms fuel tank capacity 2 to 4 ltr no of glass tube 4 nos with marking glass tube holder and manifold moc aluminium display type led suitable for all types of petrol injectors and gdi gasoline direct injection injectors achieve automatic cleaning and testing of injectors the machine should be capable to perform flowing test uniformity/spray ability test will be able to test the uniformity of injecting amount of each injector and to monitor the spraying status of each injector with the help of backlight leakage test will be able to test the sealing and dribbling conditions of injectors under system pressure injecting flow test will be able to check the injecting amount of the injector in 15 seconds of constant injection auto test will be able to test injectors by simulating different working conditions ultrasonic cleaning will be able to perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely, for nozzle sizes presser gauge 0 to 400 kgf cm2 standard accessories steel aluminium fuel container with filter manual hand operating lever handle with grip. along with split pin three way shut off valve with valve spindle. suitable fuel pipes for all injector, lifting jack screw type 3 ton capacity for vehicle 3048 kg road open height 13 inch closed 4 inch dia of screw 1 point 25 inch with bearing type lifting jack, lifting jack screw type 5ton capacity for vehicle 5048 kg road open height 13 closed 7 inch dia of screw 1 point 50 inch with bearing type lifting jack, lifting jack screw type 20 ton capacity road open height 14 inch closed 7 dia of screw 1 point 75 inch to 2 point 0 inch square threads with bearing type, magnifying glass 75mm with handle, marking table made from seasoned close grain c.i. 90cm x 60cm x 90cm. workshop grade with test certificate. with steel handle both side, levelling screws & cover. m.s. fabricated stand in standard size, digits 3 and half digit display lcd display with large digits for easy visibility voltage range ac up to 750v ac voltage range dc up to 1000v dc ac and dc current range up to 20a resistance measurement up to 200 mohm with capacitance frequency diode transistor test audible continuity test data hold facilities, 1. gear type pump for lmv this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine, 1. rotor type pump for lmv. this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine., stone oil 15 x 5 x 2.5 cm. one side rough & one side smooth., analog oscilloscope 20 mhz two channel 4 trace monochrome display 1 general portable rugged including features of component tester and in built frequency counter 2 bandwidth dc to 20 mhz 3d b 3 of channels two channels 4 deflection coefficient in calibrated steps from 5 mv to 5 v cm 5 rise time 17 point 5 ns 6 variable hold off for stable triggering 7 input impedance 1 mohm 25 pf 8 time base coefficients 18 calibrated steps 0 point 5microsec per cm to 0 point 2 sec cm with 5 magnifier to 100ns cm 9 trigger system automatic and normal level adjustable 10 source ch i ch ii alt line external 11 slope positive negative 12 coupling ac dc gnd 13 sensitivity 5 mm 14 trigger bandwidth 40 mhz 15 horizontal deflection dc 2 point 3 mhz 3db bandwidth 16 x to y mode phase shift 3 degree up to 60 khz 17 frequency counter range 20 hz to 30 mhz in built 18 computer interface usb 19 resolution 10 hz 10 khz 20 sensitivity 0 to 5v by div 21 attenuation 1 ratio 1 and 1 ratio 20 22 max input voltage 300 v rms cat ii 23 crt 140 mm rectangular with internal graticule and p31 phosphor 0 point 8 mm green colour plexiglass 24 calibrator operator 1 khz square wave 0 point2 vpp for probe compensation 25 z modulation ttl level 26 power supply 230 v plus minus 10 percent 50 hz ac supply component tester built in single touch, micrometer outside 50 to 75 mm l c 0 point 01 mm carbide tipped on anvil and spindle measuring face with spindle lock setting spanner and test piece 50 mm made of alloy steel complete in box with master, micrometer outside 75-100 mm, least count 0.01mm, carbide tipped on anvil &spindle measuring face, with spindle lock, setting spanner & test piece 75 mm, made of alloy steel complete in box with master., flaring tool set single type for tube 4 point 7 to 16 mm o d block and cone made of alloy steel and hard tempered nickel chrome plated able to flaring 1 by 2 inch 7 by 16 inch 1 by 4 inch 3 by 16 inch 3 by 8 inch and 5 by 8 inch o d, piston ring compressor 50 to 150 mm 2 1 by 2 inch wide spring bands equally distributes tension for easy compression for use on all passenger vehicles, pliers combination 200 mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, pliers nose 150mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, drill machine portable electrical 15 mm capacity a c single phase input full load 235 watt rpm 2800 and standard length supply cable and key, prick punch 150mm knurled body made from tool steel tip ground and heat treated, punch number 4 mm made from tool steel hardened set containing set of 9 piece 0 to 9 in suitable container, rivet sets snap and dolly combined 3 mm 4 mm 6 mm hand operated mabe drop forgd steel, scraper flat 250mm made from tool steel tip hardened and ground with wooden handle, scraper half round 20mm made from tool steel tip hardened and ground with wooden handle, scraper triangular 250mm made from tool steel tip hardened and ground with wooden handle, scriber with universal scribes block and accessories, dies set of stock and dies metric dies 3 4 5 6 8 10 12 14 16 and 18 set of 10 made from alloy tool steel dies circular split pattern type with suitable die stock with suitable dies handle dies hardened and tempered complete set in box, heavy duty cast iron body blade length600mm blade material d2 table size 450 mm into 600 mm back gauge attachment table 2t slot paddle spring operated, sheet metal gauge made from alloy steel steel graduation in both system british and metric, tinmans shear 300 mm made from drop forge steel cutting edge hard and tempered, soldering copper hatchet type 500 gms, solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated size 1 by 2 inch accuracy 0 point 0002 inch material made of high quality alloy steel precision ground and hardened product includes one pair of 1 inch into 6 into 1 by 2 into one pair of 1 to 1 by 2 inch into 6 into 1 by 2 inch one pair of 1 to 1 by 4 inch into 6 into 1 by 2 inch one pair of 1 to 3 by 4 inch into 6 into 1 by 2 inch application to be used in setting up work for drilling and milling, spanner clyburn 150mm. made from forged carbon steel. phosphate finish, spanner t flex for screwing up and unscrewing in inaccessible position and size 6 8 10 12 14 set of 5 pcs, spanner or wrench adjustable 150mm. standard pattern selected, made from forged steel heat treated, spark lighter friction type suitable for gas lighting, spark plug spanner size14 into 18 mm made from forged carbon steel, steel rule 150mm metric english both graduation made of stainless steel with conversion table engraved, straight edge 600 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, straight edge 1200 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, tachometer counting type display 5 digit lcd display accuracy plus minus 0 point 05 percent plus 1 digits rpm test range 2 to 99 999 rpm count range 1 to 99 999 counter resolution 0 point 1 rpm 2 to 999 point 9 rpm 1 rpm over 1000 rpm sampling time 0 point 5 sec over 120 rpm detecting distance 50 to 500 mm, this model which will give a complete idea of tandem master cylinder in vehicle and it s function the working model of tandem master cylinder assembly consisting of following minimum parts and practically demonstrable brake disc assembly one caliper assembly brake pad tandem master cylinder with vacuum booster vacuum pump brake hoses oil reservoir with oil with brake pedal features the model will be mounted on m s stand with good quality paint applications suitable sectioned to demonstrate the internal construction diagram details printed on to a colourful panel operating manual will be provided., taps and dies set b.a. 0 to 10 circular split pattern die & hand tap set of 3 piece made from alloy tool steel with suitable die stock and tap handle. taps and dies hardened & tempered. complete set in box, taps and dies b s w 1 by 4 5 by 16 3 by 8 inch 7 by 16 1 2 5 by 8 3 4 inch 7 by 8 1 inch set of 9 made from alloy tool steel dies circular split pattern type with suitable die stock hand tap set of 3 piece and tap handle taps and dies hardened and tempered complete set in box, tap and dies set metric size 03 to 24 mm 3 4 5 6 8 10 12 14 16 20 22 24 mm set of 12 made from alloy tool steel dies hand circular split pattern type with die stocks tap set having three piece taps with suitable tap handle and according to size taps and dies hardened and tempered complete set in box, taps and die set b s f by 4 5 by 16 3 by 8 inch 7 by 16 1 by 2 9 by 16 5 by 8 3 by 4 7 by 8 1 inch set of 10 made of alloy tool steel tap set of 3 piece circular split pattern die set tap wrenches and die stocks taps and dies hardened and tempered complete set in box, taps and dies width worth fine 1 by 8 inch 3 by 16 inch 3 by 8 inch 1 by 4 inch 5 by 16 inch 7 by 16 inch 1 by 2 inch 5 by 8 inch 3 by 4 inch 1 inch set of 10 made from alloy tool steel dies circular split pattern type with die stock hand tap set of 3 pieces with suitable tap handle. tap and dies hardened and tempered complete set in box, timing lighter with neon bulb for setting of all kind of petrol engine timing illumination angle approx 15 degree strobe tube high intensity xenon tube with cable used for checking ignition timing of petrol engine easily operate on 12v ignition systems 12 volt battery operated focused lens should provide light for high visibility of timing mark suitable for petrol carstwo wheelers handle design be more comfortable and easy to operate manufactured by standard company provided with suitable woodenplastic metal box, torque wrench 5 to 35 nm force, adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 12 to 68 nm force adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 50 to 225 nm force, adjustable by turning knurled handle barrel type rod form chrome plated. brake over type, tyre pressure gauge with holding nipple for measuring 0 to 160 lb by sq inch and 0 to 12kgf by sq cm of tyre pressure, universal puller for removing pulleys bearings, v block 75 into 38 mm pair with clamps v block pair with one clamps 75 into 38 into 50 mm by 75 into 50 into 50 mm made from close grain c i workshop grade, valve lifter valve spring for lifting & realizing of spring automatic ratchet lock c type reversible jaw adaptor for multi valve engines capacity 45 to 145mm throated clearance 250mm big window jaw adaptor for easy replacement of valve collects, valve spring compressor universal suitable for various cylinder head engine models, vernier calliper 300 mm length with metric and inch scale l c 0 point 02 mm four way quadric measurement type made from stainless chrome steel micro lapped hardened and tempered in box, automotive water pump of any multi cylinder water cooled engine for dismantling and assembling colored with attractive color. good finish the model will be fitted on suitable plywood sheet and constructional diagram details printed on to a colourful panel with details of applications, wire gauge made from alloy steel, gauge size 0 to 36 swg graduation in metric, bench vices 12cm jaw body made from close grain sg iron and serrated alloy steel jaw jaw heat treated spindle handle dia grater than equal 10 mm and closed on both end unbrakable materials screw materials en 24, engine type 3 cylinder inline common rail turbo diesel iron block air conditioned type displacement 1500 cc rear wheel drive water cooled engine fuel system common rail direct injection body two box five door wagon transmission type 5 speed manual suspension front independent with coil spring rear independent with coil spring steering type power assisted steering power window all four windows reverse gear sensors. anti theft device gprs inbuilt turning diameter 11 point 6 m ground clearance 180 mm wheel base 2680 mm fuel tank 60 litre s standard accessories owner s manual bs vi with abs and speed limiter, an arbor press is a small hand-operated press. it is typically used to perform smaller jobs such as staking riveting installing configuring and removing bearings and other press fit work removable machined steel anvil provides accurate work support in for slot positions automation grade manual material iron weight 30 to 50 kg usage application industrial capacity 2 ton, exhaust gas analyzer petrol arai approved to check construction of co2 o2 and hc and nox 1 construction of carbon monoxide range 0 to 9 point 999 percent resolution 0 point 01 percent 2 co2 carbon dioxide range 0 t
Agency / Dept :
department of technical education DTE
Due Date :
Jul 30, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16380538
Location : hyderabad , telangana
Source : GEM Tenders
corrigendum tender for chip brush b3101-steel , hydraulic motor-oml-8 , conveyor chain with angles pre mounted , scraper
Agency / Dept :
mishra dhatu nigam limited MIDHANI
Due Date :
Jul 31, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15998633
Location : hyderabad , telangana
Source : GEM Tenders
tender for chip brush b3101-steel , hydraulic motor-oml-8 , conveyor chain with angles pre mounted , scraper
Agency / Dept :
mishra dhatu nigam limited MIDHANI
Due Date :
Jul 24, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15606403
Location : kinnaur , himachal pradesh
Source : GEM Tenders
corrigendum tender for puf panels 50 mm thick , false ceiling with 8mm thick with cellulose fibre for fixing in 600mm x 600mm grid , pre painted galvalume aluminum steel sheet 0 point 80mm thick , verandah cover with aluminium partitions with 5 point 5 mm thick plain glass , ismb , hollow iron , angle or flat iron or base plate , ms sheet , tmt bars , nut and bolt , door of size 1200x2100 mm , door of size 900x2100 mm , door of size 750x2100 mm , window of size 1200x1200mm , ventilators of size 450x300 mm , fire extinguisher ball 1 point 30kg , curtain rod of size 1 point 30 m length , steel almirah large , smart ortho mattress ultimate back pain relief size 1 point 80 meter length and 0 point 90m wide and 150mm thick , foot scraper , iron foot mat , white cement , looking mirror size 0 point 45x1 point 65m , double bunks ms tubes with 12mm thick , floor mounted hot and cold water dispenser of capacity 20 ltrs , bed side table of size 450mmx300mmx400mm , puf tank 1000 ltrs , plastic dustbins of toughened plastic 120 ltr , stainless steel shoe rack and shoe stand and multipurpose stand 31x24 inch , sealing material , laminated wooden floor 24mm thick wooden ply with 3 mm thick , fd heating device alongwith all accessories , solar light solar street light 24w , septic tank 3000 ltrs with anaerobic soakage pits , ordinary portland cement , coarse sand , stone aggregate 20mm , stone aggregate 40mm , stone aggregate 10mm , vitrified tiles square 600x600x10mm as in floors , non skid tiles square 300x300x8mm as in toilet , stone aggregate 63mm , mcb distribution board db 12 way , mcb sp 32 amps , mcb sp 16 amps , mcb single pole 100 amps , mcb sp 10 amps , lt panel feeder box with complte accessories and 440 volts , die casted bulk head 8 watt , 16 amp modular switch and socket combination with gang box , 16 oblique 6 amp modular switch and socket combination, 80 men double storey or living shelter, store list items to be supplied as per technical specifications mentioned in pdf document, electric items to be supplied as per technical specifications mentioned in pdf document, supply only ofsanitary and plumbing items of living shelter 40men (ds) as per technical specifications mentioned in pdf document
Agency / Dept :
armed forces tribunal AFT
Due Date :
Jun 10, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Steel Scraper. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Steel Scraper sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Steel Scraper Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Steel Scraper, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Steel Scraper Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Steel Scraper Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Steel Scraper.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Steel Scraper depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Steel Scraper Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Steel Scraper bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Steel Scraper. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Steel Scraper, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Steel Scraper, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Steel Scraper?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Steel Scraper tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Steel Scraper?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Steel Scraper, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Steel Scraper is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All