sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

42Latest Screw pitch gauge Tenders List

Latest Screw pitch gauge Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Screw pitch gauge tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Screw pitch gauge tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Screw pitch gauge Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Screw pitch gauge tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Screw pitch gauge Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Screw pitch gauge Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Screw pitch gauge Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Screw pitch gauge tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Screw pitch gauge Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Screw pitch gauge sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Screw pitch gauge tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Screw pitch gauge tenders.

Is EMD mandatory for all Screw pitch gauge tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Screw pitch gauge work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Screw pitch gauge tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Screw pitch gauge Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16877714
Location : thiruvananthapuram , kerala
Source : GEM Tenders
LIVE TENDER
tender for iso-3 r 2020 k20 , iso-2 r 2020 k20 , iso-7 r 2012 k20 , iso-7 r 1610 k20 , iso-7 r 1208 k20 , iso-7 r 0808 k20 , iso-9 r 1010 k20 , iso-9 r 1212 k20 , iso-9 r 1616 k20 , m14 x 1.5 tap , m14 x 1.5 die , screw pitch gauge - metric , screw pitch gauge - bsw, tools, tool- 1, tool- 2, tool- 3, tool- 4, tool- 5, tool- 6, tool- 7, tool- 8, tool- 9, tool- 10, tool- 11, tool- 12, tool- 13
Agency / Dept :
indian space research organisation ISRO
Due Date :
Sep 10, 2026 (10 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16925471
Location : hubli , karnataka
LIVE TENDER
tender for stainless steel screw thread pitch gauge, stainless steel screw thread pitch gauge , range 0.25 to 6 mm, blade individually marked wi th pitch, 1 set consists of 28 screw thread pitch blades (metric), supplied in a storage pouch. make: baker/ insize/ mitutoyo/ yasung/ samenx/ ajanta/ precision. warranty: up to 12 months from the date of delivery. - warranty period: 12 months after the date of delivery
Agency / Dept :
south western railway SWR
Due Date :
Sep 10, 2026 (10 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16812147
Location : secunderabad , telangana
Source : GEM Tenders
LIVE TENDER
tender for try square 10 cm blade , straight scriber 15 cm , hacksaw frame fixed 30 cm , safety goggles , caliper 15 cm hermaphrodite , divider 15 cm spring , screw driver 15 cm , cold chisel flat 12mm , ball pane hammer 450 gm with handle. , ball pane hammer bal 220 gm with handle , half round file 15 cm llnd cut , dot punch 10 cm , file cant saw 15 cm smooth , file round 20 cm 2nd cut , file square 15 cm 2nd cut , feeler gauge 10 blades , file triangular 20 cm 2nd cut , file swiss type needle set of 12 , file half round 25 cm iind cut , file card , stone oil 15 cm x 5 cm x 2point5 cm , oil can 250ml , spanner metric d e set of 10 pieces , interchangeable ratchet socket set 12 mm driver , box spanner 6 25 mm set of 8 with tommy bar , clamp toolmaker 5 cm and 7point5 cm set of 2 , clamp c 5 cm , hand reamer adjustable cover max 9 12 i8mm set of 3 , hand reamer taper 4 to 9 mm set of 6 or 4 to 7 mm set of 4 , reamer parallel 12 to 16mm set of 5 , scraper flat 15cm , scraper half round 15 cm , chisel cold 9 mm diamond , chisel cold 9 mm cross cut , chisel cold 19mm flat , chisel cold 9 mm round nose , extractor stud ezy out , set combination 30 cm , micrometer 0to25mm out side , micrometer 25to50mm out side with 25 mm test piece , micrometer 50to75mmout side with 50mm test piece , micrometer in side 25to50mm , vernier caliper 20 cm , vernier height gauge 30 cm , vernier bevel protractor , screw pitch gauge , wire gauge metric standard , drill twist taper shank 6mm to 25 mmx1point5 , drill chuck 12mm , wheel dresser 1 for 4 units , machine vice 10cm , sleeve drill morse 0to1 1to2 2to3 , leg vice 10cm jaw , wing compass 25point4cm or 30cm , radius gauges assorted 7 to 15 mm , dial test indicator 0point01 mm , magnetic stand for dti , counter sinking tool , rule steel 30 cm to read metric , rule steel 60 cm , straight edge 45 cm steel , surface plate 45x45 cm cl per granite , marking table 91x91x122 cm , universal scribing block 22 cm , v block pair 7 cm and 15 cm with clamps , square adjustable 15 cm blade , angle plate 10x20 cm , spirit level 15cm metal , portable hand drill electric 0 to 6 mm 550 watt , twist drill straight shank 15 to 12 mm by 1by2 mm , twist drill straight shank 8 mm to 15 mm by 1by2 mm , taps and dies complete set in box b a , taps and dies complete set in box width worth , taps and dies complete set in box 3to18 mm set of 10 , pipe wrench 40cm , pipe wrench 30 cm , pipe vice 100mm , adjustable pipe tap set bsp with die set cover pipe size 15 20 25 32 38 50mm , gauge slip as johnson metric set , carbide wear block 0 lmm 02mm , gauge snaps go and no go 25 to 50mm by 5mm set of 06pcs , gauge plug single ended 05 to 55 by 5mm set of 1 pcs , gauge telescopic up to 150mm , dial vernier caliper 0 to 200mm lc00point05mm universal type , vernier micrometer 0 to 50 mm , depth micrometer 0to 100mm 0point01mm , vernier caliper 150mm lc 0point02mm , comparators stand with dial indicator indicator lc 0point01 mm , engineers try square knife edge 150mm blade , surface roughness comparison plates n1 n12 grade , digital vernier caliper 20cm , digital outside micrometer 0 to 25mm , digital dial test indicator , straight snips 250by300mm , bend snips 250by300mm , swage block , sine bar 125mm , sine bar 250mm , surface roughness tester, raw material for fitter trade nstiv, try square 10 cm blade, straight scriber 15 cm, hacksaw frame fixed 30 cm, safety goggles, caliper 15 cm hermaphrodite, divider 15 cm spring, screw driver 15 cm, cold chisel flat 12mm, ball pane hammer 450 gm with handle., ball pane hammer bal 220 gm with handle, half round file 15 cm llnd cut, dot punch 10 cm, file cant saw 15 cm smooth, file round 20 cm 2nd cut, file square 15 cm 2nd cut, feeler gauge 10 blades, file triangular 20 cm 2nd cut, file swiss type needle set of 12, file half round 25 cm iind cut, file card, stone oil 15 cm x 5 cm x 2point5 cm, oil can 250ml, spanner metric d e set of 10 pieces, interchangeable ratchet socket set 12 mm driver, box spanner 6 25 mm set of 8 with tommy bar, clamp toolmaker 5 cm and 7point5 cm set of 2, clamp c 5 cm, hand reamer adjustable cover max 9 12 i8mm set of 3, hand reamer taper 4 to 9 mm set of 6 or 4 to 7 mm set of 4, reamer parallel 12 to 16mm set of 5, scraper flat 15cm, scraper half round 15 cm, chisel cold 9 mm diamond, chisel cold 9 mm cross cut, chisel cold 19mm flat, chisel cold 9 mm round nose, extractor stud ezy out, set combination 30 cm, micrometer 0to25mm out side, micrometer 25to50mm out side with 25 mm test piece, micrometer 50to75mmout side with 50mm test piece, micrometer in side 25to50mm, vernier caliper 20 cm, vernier height gauge 30 cm, vernier bevel protractor, screw pitch gauge, wire gauge metric standard, drill twist taper shank 6mm to 25 mmx1point5, drill chuck 12mm, wheel dresser 1 for 4 units, machine vice 10cm, sleeve drill morse 0to1 1to2 2to3, leg vice 10cm jaw, wing compass 25point4cm or 30cm, radius gauges assorted 7 to 15 mm, dial test indicator 0point01 mm, magnetic stand for dti, counter sinking tool, rule steel 30 cm to read metric, rule steel 60 cm, straight edge 45 cm steel, surface plate 45x45 cm cl per granite, marking table 91x91x122 cm, universal scribing block 22 cm, v block pair 7 cm and 15 cm with clamps, square adjustable 15 cm blade, angle plate 10x20 cm, spirit level 15cm metal, portable hand drill electric 0 to 6 mm 550 watt, twist drill straight shank 15 to 12 mm by 1by2 mm, twist drill straight shank 8 mm to 15 mm by 1by2 mm, taps and dies complete set in box b a, taps and dies complete set in box width worth, taps and dies complete set in box 3to18 mm set of 10, pipe wrench 40cm, pipe wrench 30 cm, pipe vice 100mm, adjustable pipe tap set bsp with die set cover pipe size 15 20 25 32 38 50mm, gauge slip as johnson metric set, carbide wear block 0 lmm 02mm, gauge snaps go and no go 25 to 50mm by 5mm set of 06pcs, gauge plug single ended 05 to 55 by 5mm set of 1 pcs, gauge telescopic up to 150mm, dial vernier caliper 0 to 200mm lc00point05mm universal type, vernier micrometer 0 to 50 mm, depth micrometer 0to 100mm 0point01mm, vernier caliper 150mm lc 0point02mm, comparators stand with dial indicator indicator lc 0point01 mm, engineers try square knife edge 150mm blade, surface roughness comparison plates n1 n12 grade, digital vernier caliper 20cm, digital outside micrometer 0 to 25mm, digital dial test indicator, straight snips 250by300mm, bend snips 250by300mm, swage block, sine bar 125mm, sine bar 250mm, surface roughness tester
Agency / Dept :
directorate general of training
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16812310
Location : jodhpur , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for cut , file flat 300 mm second cut , file flat 200 mm bastard , file flat 300 mm bastard , file swiss type needle set of 12 , file half round 250 mm second cut , file half round 250 mm bastard , file round 250 mm bastard , file hand 150 mm second cut , file card wire brush , oil can 250 ml , plier combination insulated 150 mm , wooden handle forged soldering iron copper bit , blow lamp 500 ml , spanner double ended set of 8 pcs , spanner adjustable 150 mm , interchangeable ratchet socket set with 12 mm driver , double ended tubular box spanner set with tommy bar , glass magnifying 75 mm , clamp tool maker 50 mm , clamp tool maker 75 mm , c-clamp 100 mm , c-clamp 200 mm , reamer hand set pin taper straight flute , reamer machine parallel helical flute , scraper flat 150 mm , scraper triangular 150 mm , scraper half round 150 mm , chisel cold 9 mm x150 mm cross cut , chisel cold 9 mm x 150 mm diamond , chisel cold flat 9 mm x 100 mm , chisel cold 9 mm x 100 mm round nose , drill chuck 12 mm with key , pipe wrench 400 mm , pipe vice 100 mm , adjustable pipe die set b.s.p , wheel dresser , vice machine 100 mm jaw swivel base , vice machine 125 mm swivel base , sleeve drill morse , vice bench 150 mm jaw , bench working 2400 x 1200 x 900 mm , almirah 1800 x 900 x 450 mm , lockers with 12 drawers standard size , metal rack 1820 x 900 x 450 mm , instructor table , instructor chairs , black board with easel , fire extinguisher , fire buckets with stand , vice machine 100 mm jaw , wing compass 300 mm , hammer hand 1 kg. with handle , torque wrench 14 to 68 nm ratchet type , power tools for fastening capacity 10-18mm , different profile gauges plate type for demonstration , knurling tool diamond , knurling tool straight and diagonal , indexable boring bar with inserts , temperature gauge range , dowel pin straight , standard tap screws , lapping plate dia , metric drill gauge , letter drill gauge , number drill gauge , cast iron globe valve flanged type , c.i. sluice gate valve flanged type , stop cock , slip-on forged steel flange , pipe threading die with handle , pulleys for v-belt or flat belt , v- belt and flat belt , washer, clutch, keys, jib, cotter and circlips , hollow punch , bearing different types , lifting sling , bearing extractor , pulley extractor , trammel 300 mm , punch prick , mallet , aviation snip straight cut 300 mm , hammer flat headed with handle , hammer planishing , snip bent left cut 250 mm , stake hatchet with leg , stake grooving , gauge slip metric as johnson set , gauge snap go and not go 25 to 50 mm by 5mm set of 6 pcs , gauge plug single ended 5 to 55 by 5 mm set of 11 piece , gauge telescopic 8 to 150 mm , dial test indicator on stand , sine bar 125 mm , dial vernier caliper universal type , screw thread micrometer , depth micrometer , digital vernier caliper , digital micrometer , comparator gauge , engineer try square , surface roughness comparison , vernier bevel protractor , carbide wear block , lathe tools h.s.s. , lathe tools bit , arm strong type tool bit holder , stilson wrenches , pipe cutter wheel type , pipe bender spool type with stand manually , adjustable pipe chain tong to take pipes , spanner adjustable , s.s. and s.c. centre lathe , drilling machine pillar sensitive , drilling machine bench sensitive , d.e. pedestal grinding machine , transformer welding set 300 amps , welding cable , lugs for cable , earth clamps , arc welding table , oxy- acetylene gas welding set , gas welding table with, lab of fitter trade, steel rule 150mm with metric and british graduation, try square 150mm blade, caliper inside 150mm spring, caliper 150mm hermaphrodite spring type, caliper outside 150mm spring, divider spring joint 150mm, scriber 150mm multiple 5mm, punch centre 120mm multiple 10mm, screw driver 150mm multiple 6mm, chisel cold flat 20mm multiple 150mm, hammer ball peen 450 gm, hammer ball peen220 gm, file flat 250 mm second cut, file flat 250 mm smooth, file half round 150 mm second cut, hacksaw frame fixed 300mm, safety goggles plain, punch dot 100 mm, steel rule graduated both in metric and english unit, straight edge steel, spirit level 300 mm, stud extractor, combination set 300 mm, micrometer outside 0 to 25 mm, micrometer outside 25 to 50 mm, micrometer outside 50 to 75 mm, micrometer inside with extension rods, vernier caliper 150 mm, vernier height gauge 300 mm, vernier bevel protractor blade with acute angle attachment, screw pitch gauge, wire gauge metric standard, surface plate 600 multiple 600 mm c.i. granite with stand and cover, marking table 900 multiple 900 multiple 900 mm mild steel, universal scribing block 220 mm, v-block pair 150 multiple 100 multiple 100 mm with clamp, angle plate 150 multiple 150 multiple 250 mm, punch letter set, punch number set, portable hand electric drill machine 0 to 13 mm capacity, drill twist straight shank 3 to 13 mm by 0.5 mm, drill twist taper shank 8 mm to 20 mm by 0.5 mm, taps and dies complete set in a box, taps and dies complete set in box set of 05, file knife edge 150 mm smooth, file feather edge 150 mm smooth, file triangular smooth 200 mm, file round 200 mm second cut, file square 250 mm second cut, gauge feeler, file triangular 200 mm second cut, file flat 300 mm second cut, file flat 200 mm bastard, file flat 300 mm bastard, file swiss type needle set of 12, file half round 250 mm second cut, file half round 250 mm bastard, file round 250 mm bastard, file hand 150 mm second cut, file card wire brush, oil can 250 ml, plier combination insulated 150 mm, wooden handle forged soldering iron copper bit, blow lamp 500 ml, spanner double ended set of 8 pcs, spanner adjustable 150 mm, interchangeable ratchet socket set with 12 mm driver, double ended tubular box spanner set with tommy bar, glass magnifying 75 mm, clamp tool maker 50 mm, clamp tool maker 75 mm, c-clamp 100 mm, c-clamp 200 mm, reamer hand set pin taper straight flute, reamer machine parallel helical flute, scraper flat 150 mm, scraper triangular 150 mm, scraper half round 150 mm, chisel cold 9 mm x150 mm cross cut, chisel cold 9 mm x 150 mm diamond, chisel cold flat 9 mm x 100 mm, chisel cold 9 mm x 100 mm round nose, drill chuck 12 mm with key, pipe wrench 400 mm, pipe vice 100 mm, adjustable pipe die set b.s.p, wheel dresser, vice machine 100 mm jaw swivel base, vice machine 125 mm swivel base, sleeve drill morse, vice bench 150 mm jaw, bench working 2400 x 1200 x 900 mm, almirah 1800 x 900 x 450 mm, lockers with 12 drawers standard size, metal rack 1820 x 900 x 450 mm, instructor table, instructor chairs, black board with easel, fire extinguisher, fire buckets with stand, vice machine 100 mm jaw, wing compass 300 mm, hammer hand 1 kg. with handle, torque wrench 14 to 68 nm ratchet type, power tools for fastening capacity 10-18mm, different profile gauges plate type for demonstration, knurling tool diamond, knurling tool straight and diagonal, indexable boring bar with inserts, temperature gauge range, dowel pin straight, standard tap screws, lapping plate dia, metric drill gauge, letter drill gauge, number drill gauge, cast iron globe valve flanged type, c.i. sluice gate valve flanged type, stop cock, slip-on forged steel flange, pipe threading die with handle, pulleys for v-belt or flat belt, v-belt and flat belt, washer, clutch, keys, jib, cotter and circlips, hollow punch, bearing different types, lifting sling, bearing extractor, pulley extractor, trammel 300 mm, punch prick, mallet, aviation snip straight cut 300 mm, hammer flat headed with handle, hammer planishing, snip bent left cut 250 mm, stake hatchet with leg, stake grooving, gauge slip metric as johnson set, gauge snap go and not go 25 to 50 mm by 5mm set of 6 pcs, gauge plug single ended 5 to 55 by 5 mm set of 11 piece, gauge telescopic 8 to 150 mm, dial test indicator on stand, sine bar 125 mm, dial vernier caliper universal type, screw thread micrometer, depth micrometer, digital vernier caliper, digital micrometer, comparator gauge, engineer try square, surface roughness comparison, vernier bevel protractor, carbide wear block, lathe tools h.s.s., lathe tools bit, arm strong type tool bit holder, stilson wrenches, pipe cutter wheel type, pipe bender spool type with stand manually, adjustable pipe chain tong to take pipes, spanner adjustable, s.s. and s.c. centre lathe, drilling machine pillar sensitive, drilling machine bench sensitive, d.e. pedestal grinding machine, transformer welding set 300 amps, welding cable, lugs for cable, earth clamps, arc welding table, oxy-acetylene gas welding set, gas welding table with positioner, welding torch tips, trolley for gas cylinders, hammer chipping 300g, gloves leather, leather apron, spindle key for cylinder valves, welding torches, welding goggles, welding helmet, tip cleaner, pneumatic trainer kit, hydraulic trainer kit
Agency / Dept :
department of technical education DTE
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16600305
Location : gorakhpur , uttar pradesh
LIVE TENDER
tender for set of gauges for checking screw coupling of transition cbc., set of gauges for checking screw coupling of transition cbc.the above item consists 06 vari ous types of gauges as follows:1) condemning gauge for short shackle screw coupling size: go29.50mm & no go-25.0mm. asper rdso drg. no. 4685 & rdso-mp-mi-no-25. rev.0, jan 2006. material specification : tool steel to is no. 3748/90. hardness 50/55 hrc. qty - 1 no/set.2) condemning gauge for long shackle sc rew coupling size: go-45.0mm & no go-39.50mm. as per rdso drg. no. 4685 & rdso-mp-mi-no-25. rev. 0, jan 2006. material specification :tool steel to is no. 3748/90. hardness 50/55 hrc. qty - 1 no/set. 3 ) construction of ndemning gauge for checking the play between the hole short shackle & trunion screw pin condemning siz e: 187.0mm .as per rdso drg. no. 4685 & rdsomp-mi-no-25. rev.0, jan 2006. material specification : too l steel to is no. 3748/90. hardness 50/55 hrc. qty - 1 no/set.4) condemning gauge for checking the play b etween the hole long shackle & trunion nut pin condemning size:278.0mm . as per rdso drg. no. 4685 & rdso-mp-mi-no-25. rev.0, jan 2006. material specification :tool steel to is no. 3748/90. hardness 50/55 h rc. qty - 1 no/set.5) screw pitch gauge (go & no go) (knuckle thread -lh) size: r- 1.404mm & r-1.625m m . as per rdso-mp-mi-no25. rev.0, jan 2006. qty 1 no/set.6) screw pitch gauge (go &no go) (knuckle thread - rh) size: r1.515mm & r- 1.625mm . qty- 1 no as per rdso-mp-mi-no-25. rev.0, jan2006. qty - 1 no/set. - warranty period: 30 months after the date of delivery
Agency / Dept :
north eastern railway NER
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16987516
Location : bhubaneswar , odisha
Source : GEM Tenders
LIVE TENDER
corrigendum tender for cutting tools hand tools and measuring instrument straight grinding wheel- 200 x 20 x 31.75mm , straight grinding wheel-150 x 13 x 31.75 , diamond dresser-1.5 carat type-a-dia 10 x 80 x 1.5 , tool makers small pin typesteel grinding precision vice- 4 inch , tool makers small pin type- steel grinding precision vice- 2 inch , allen key set , allen key 12mm , ring spanner 16-17mm , ring spanner 18-19mm , ring spanner 21-23mm , ring spanner 20- 22mm , ring spanner 24-27mm , ring spanner 25-28mm , ring spanner 30-32mm , open spanner 20-22mm , open spanner 21-23mm , open spanner 18-19mm , adjustable spanner 8inch-200mm , bevel edge try square- 6inch , tool maker try square - 4inch , liver types dial test indicator - 0.01mm , plunger type dial test indicator 0-10mm, 0.01mm lc , mechanical vernier caliper 0-150mm , mechanical vernier caliper 0-200mm , mechanical vernier caliper 0- 300mm , outside micro meter 0-25mm , outside micro meter 25-50mm , outside micro meter 50-75mm , screw pitch gauge 52 leaves , 0.25-6mm , locking type radius gauge with 0.25 mm step and 34 leaves 1-7mm , straight edge 100mm, 4inch , insert oaku060508sr-m 50 ctpp235 ceratizit , insert screw m5x16, make- ceratizit, oaku060508sr-m 50 ctpp235 , insert screw driver t20, make- ceratizit , face mill cuter dia 100mm suitable to hnpj 0905ansgd-kcpm40 insert, make- kennametal , face mill cuter dia 80mm suitable to hnpj 0905ansgd-kcpm40 insert, make- kennametal , insert suitable to hnpj 0905ansgd-kcpm40 insert, make kennametal , insert screw m4x14 , make- kennametal, hnpj 0905ansgdkcpm40 , insert screw driver t15, make- kennametal , hand tap set m5x0.8 , hand tap set m6x1 , hand tap set m8x1.25 , hand tap set m12x1.75 , die stock m6x1 , die stock m10x1.5 , die stock m16x2.0 , parallel shank hand reamer dia 10h7 , parallel shank hand reamer dia 6h7 , parallel shank hand reamer dia 8h7 , parallel shank hand reamer dia 5h7 , parallel shank hand reamer dia 4h7 , die stock handle m6 , die stock handle m10x1.5 , die stock handle m16x2.0 , m2 - m6 adjustable tap wrench handle , m4 - m10 adjustable tap wrench handle , m4 - m12 tap wrench , hss end mill cutter dia 6mm , hss end mill cutter dia 8mm , hss end mill cutter dia 10mm , hss end mill cutter dia 14mm , hss end mill cutter dia 16mm , hss end mill cutter dia 20mm , hss end mill cutter dia 25mm , slot drill cutter dia 6mm , slot drill cutter dia 8mm , slot drill cutter dia 10mm , slot drill cutter dia 14mm , slot drill cutter dia 16mm , slot drill cutter dia 20mm , slot drill cutter dia 25mm , parallel shank twist drill bit dia 3.4mm , parallel shank twist drill bit dia 4.0mm , parallel shank twist drill bit dia 4.2mm , parallel shank twist drill bit dia 4.4mm , parallel shank twist drill bit dia 4.5mm , parallel shank twist drill bit dia 5.0mm , parallel shank twist drill bit dia 5.5mm , parallel shank twist drill bit dia 5.8mm , parallel shank twist drill bit dia 6.5mm , parallel shank twist drill bit dia 7.8mm , parallel shank twist drill bit dia 8.0mm , parallel shank twist drill bit dia 8.5mm , parallel shank twist drill bit dia 9.0mm , parallel shank twist drill bit dia 9.5mm , parallel shank twist drill bit dia 9.8mm , parallel shank twist drill bit dia 10.0mm , parallel shank twist drill bit dia 10.2mm , parallel shank twist drill bit dia 11.0mm , taper shank twist drill bit dia 15.0mm , taper shank twist drill bit dia 18.0mm , taper shank twist drill bit dia 27.0mm , flat drill bit dia 11.0mm , flat drill bit dia 10.0mm , counter bore drill bit dia 5xdia 9mm , center punch 90degree x 100mm , centre drill type- a dia 2.5 x 6.30 , centre drill type-a dia 4 x 10 , sleeve mt1 by 2 , sleeve mt1 by 3 , sleeve mt2 by 3 , sleeve mt3 by 4 , key less drill chuck dia 1-dia 13mm mt3 , flat cut bastard file 12 inch , triangular smooth file 6 inch , flat smooth file 6 inch , knife edge file 6 inch , soft hammer 250gm , ball pein hammer 500gm , flat jewelers file 4inch , hand hacksaw frame 300mm , hand hacksaw blade 18tpi , make- mirinda or bipico , single point cutting tool 1by2 x 8inch , single point cutting tool 3by8 x8inch , lathe dog bent type dia 15 , lathe dog bent type dia 30 , lathe dog bent type dia 35 , diamond knurling tool pivot head medium diamond metric pitches, 1by2 inch sq. shank small double roller , diamond knurling tool pivot head medium diamond metric pitches, 1by2 inch sq. shank medium double roller , revolving center mt3, cutting tools hand tools and measuring instrument, detail tech spec as per annex-v, g-a, detail tech spec as per annex-v, g-b, detail tech spec as per annex-v, g-c, detail tech spec as per annex-v, g-d, detail tech spec as per annex-v, g-e, detail tech spec as per annex-v, g-f, detail tech spec as per annex-v, g-g, detail tech spec as per annex-v, g-h, detail tech spec as per annex-v, g-i, detail tech spec as per annex-v, g-j
Agency / Dept :
micro small and medium enterprises MSME
Due Date :
Sep 01, 2026 (1 day left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16808729
Location : umiam , meghalaya
Source : GEM Tenders
LIVE TENDER
tender for workshop items - cylinder side casting frame , main gear , pinion gear casting , pedal spacer guide casting , bottom pedal casting , cylinder side bearing house casting , cross casting , connecting rod bearing housing casting , ms casting for fixing the blades , m.s. flat 20 x 3 mm , m.s. flat 30 x 6 mm , m.s. flat 50 x 5 mm , saw blade 2 and half inch size , m.s sheet 4x8 sq.feet 16 gauge , m.s sheet 4x8 sq. feet 18 gauge , m.s sheet 4x8 sq.feet 14 gauge , stainless steel sheet 304 grade 4x8 feet 1.2 mm thickness , ms equal angle 40 x 40 x 5 mm , ms equal angle 25 x 25 x 5 mm , ms equal angle 30 x 30 x 5 mm , ms equal angle 50 x 50 x 5 mm , ms rectangular pipe 3 inch x 1 inch , ms channel 20 mm , black conduit pipe 25 mm outer dia , ms square pipe 1 inch heavy , ms square pipe 2 inch heavy , ms square pipe 1 and one-fourth inch , ms square pipe half inch 15 feet length , plain pipe 25 mm outer diameter , ms rod 8 mm , ms rod 10 mm , ms rod 12 mm , ms square rod 10 mm , ms square rod 8 mm , ms cold roll bright bar 25 mm 20 feet length , ms cold roll bright bar 40 mm 20 feet length , gi nuts and bolts 9 mm diameter and 90 mm length , gi nuts and bolts 6 mm diameter and 45 mm length , gi nuts and bolts 8 mm diameter and 45 mm length , gi nuts and bolts 13 mm diameter and 127 mm length , gi nuts and bolts 10 mm diameter and 85 mm length , m s washer 10 mm inner diameter 25 mm outer diameter , m s washer 8 mm inner diameter 50 mm outer diameter , m s washer 19 mm inner diameter 50 mm outer diameter , m.s rivets 4 mm diameter x 5 mm length flat head , m.s rivets 5 mm diameter x 12 mm length round head , welding electrodes 2.50 mm size , welding electrodes 3.15 mm size , enamel paint mint green , thinner for paint , trolley wheel 8 inch size with 23 mm shaft size , ball bearings 6202 size , ball bearings 6200 size , cut off wheel size 355 x 2.8 x 25.4 mm , cutter grinder wheel 105 x 1.2 x 16 mm , flap disc 60 grit size 100 x 16 mm , grinding disc 105 x 1.2 x 16 mm , coal coke fuel , cotton jute , pillow block bearing p205 id 25 mm diameter , pillow block bearing f205 id 25 mm diameter , rubber dotted for plucker cleaning machine 10 x 2 x 3 cm lxwxh , cycle frame double bar ph type 22 inch size , crank and pedal for cycle 60 teeth with 210 mm diameter , cotter pin lock for crank and pedal 10 mm , 22 teeth sprocket freewheel rear flywheel 34 mm inner diameter , bicycle chain pitch 12.7mm, width 3.17 mm, 8 feet length , stainless steel allen counter sunk screw 6 x 25 mm , stainless steel allen counter sunk nuts 6 mm , stainless steel allen counter sunk washer 6 mm , high speed steel planer blades 90 x 39 x 3 mm , ms heavy duty hatch hinge free swing 37 mm l x 67.5 mm w x 2 mm t , ms hinge 3 inch , chrome finishes ms tower bolt 3 inch size for door , water soluble cutting oil metal working fluid, iso certified , machine oil ep 68 with iso certification , hydraulic oil 68 iso certified , ms taps bsw 1 by 8 inch, 5 by 32 inch, 3 by 16 inch, 1 by 4 inch, 5 by 16 inch, 3 by 8 inch , ms taps metric 9 mm and 10 mm , carbide end mill 8 mm and 10 mm , combination spanner set from 3 mm to 22 mm size , bicycle grip handle , combination plier 7 inch , flat nose plier 6 inch , carbon brush for 4 inch angle grinder, description1, description2, description3, description4, description5, description6, description7, description8, description9, description10, description11, description12, description13, description14, description15, description16, description17, description18, description19, description20, description21, description22, description23, description24, description25, description26, description27, description28, description29, description30, description31, description32, description33, description34, description35, description36, description37, description38, description39, description40, description41, description42, description43, description44, description45, description46, description47, description48, description49, description50, description51, description52, description53, description54, description55, description56, description57, description58, description59, description60, description61, description62, description63, description64, description65, description66, description67, description68, description69, description70, description71, description72, description73, description74, description75, description76, description77, description78, description79, description80, description81, description82, description83, description84, description85
Agency / Dept :
indian council of agricultural research ICAR
Due Date :
Sep 05, 2026 (5 days left)
Tender Value :
19.93L
View Documents
T18 Ref No : 16900294
Location : mumbai , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for (26b52c001) n5210-000141 gauge thickness filler type 100mm comprises of taper blades , n5210-000155 gauges clock for crankshaft alignment , n5210- 000197 gauge thickness feeler , n5210-000201 micrometer omm to 75mm , n5210-000202 micrometer, inside 50 mm to 300 mm , n5210-000204 micrometers outside 0 mm to 25mm (26b52c001) , n5210-000231 micrometer outside 100 to 200mm , n5210-000274 tape sounding dip heavy weight 15 mtr length , n5210-000122 gauge screw 30 pitch & 4 to 42mm , n5210-000129 gauge surface
Agency / Dept :
indian navy
Due Date :
Sep 11, 2026 (11 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16919802
Location : hassan , karnataka
Source : GEM Tenders
LIVE TENDER
tender for river sand , surkhi , lime , brick bats of 20 mm , jaggery , antuwalakai , kadukkai , grinding machine hiring including fuel charges , grinding machine , lime mixing machine , size stone , special size bricks , rubbles stone , modular common brunt clay bricks , cement mortar , trowel sharp edge - blades , trowel curve edge , wooden float , plastic buckets 25 liters , aluminium screed 2inchx1inchx5feet , aluminium screed 2inchx1inchx3feet , curing pipe one inch 100 meter , saw blade , rubber hand gloves set , cloth hand gloves set , gumboots , safety helmet , safety goggles , shovel , pvc round pan , sieving mesh , plastic water storage pot , water storage plastic drums , pvc water drum 2000 liters capacity , 2 hp motor , tarpaulin sheet , disposable face mask , safety belt , hammer 2kgs head with handle , chisel , sharping charges of chisel , gunny bags , aluminium wire 90m coil , switch box 4 module, switch and socket , bulb led 18w , pointing trowel , wire brush , coir brush , transportation of materials , 50mm dia and 5mm thick hollow ms pipe , 2 nos ms steel 15mm thick inter lock chainage , synthetic enamel paint , carriage of rubbish item, supply of good quality river sand (coarse and fine) required for lime works shall consist of natural sand, shall be hard, durable, clean and free from adherent coatings and organic matter, shall not contain the amount of clay not more than 5percentage by mass, free from silt, shall not contain any harmful impurities such as iron pyrites, alkalis, salts, coal or other organic impurities to affect adversely the hardening, strength or durability of the mortar, supply of good quality 1st class surkhi used as fine aggregate in lime mortar. surkhi, powdered broken brick, prepared by pozzolanic material well burnt good quality bricks and clay balls, finely grinded, powdered, free from under burnt particles of soluble salts, more resistant to alkalis and salt solutions, pyrites and adherent coatings of soil or silt, used for making waterproofing, lime mortars and, lime concrete, including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications .( test reports as per is standard from recognised govt agency and the material sample approval should be taken from the office before supplying), supply of good quality un slaked lime directly from quarry not more than 15 days required for preparation of lime putty in traditional method on the process of slaking, from non-hydraulic lime silica and alumina in quantities of less than 15percentage in lime will be accepted, used for masonry mortars, lime concrete and plaster undercoat, minimum 1.25n mm square compressive strength for 7days, etc., including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications, supply of good quality 20 mm brick bats obtained by crushing well-burnt clay bricks of class designation 7.5, hard, sound, and free from under-burnt particles, soluble salts, pyrites, dust, soil, and other deleterious matter, graded to pass through a 20 mm sieve and retained on a 10 mm sieve, suitable for use as coarse aggregate in lime mortar and lime concrete, including loading, transportation, unloading, stacking, all labour, and incidental charges complete as directed by the engineer-in-charge and as per specifications, supply of good quality jaggery, ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the work in charge, supply of good quality antuwalakai (soap nut and feronia additive as locally approved), clean, dry and free from impurities, suitable for preparation of traditional lime mortar to improve workability, durability and bonding properties in conservation works, as directed by the engineer-in-charge, supply of good quality kadukkai - mature, clean and free from foreign matter, suitable for use as a traditional additive in lime mortar for improving strength, durability and water resistance in conservation works, as approved by the engineer-in-charge, grinding machine hiring including fuel charges providing and hiring heavy-duty grinding machine in good working condition, complete with all accessories, suitable for grinding lime, surkhi and other approved materials required for conservation works, including fuel and operational requirements, providing and hiring portable grinding machine in good working condition, complete with necessary accessories, suitable for grinding small quantities of lime mortar ingredients and other approved materials for conservation works, including fuel and operational requirements., lime mixing machine hiring including fuel charges providing and hiring lime mixing machine of adequate capacity, diesel or electrically operated, in good working condition, suitable for uniform mixing of lime mortar for conservation works, complete with all necessary accessories including fuel wherever applicable, size stone 300mm x 300mm x 250mm, bond stone 350mm x 500mm x 250mm size supply of hard, sound and durable natural size stones and bond stones, obtained from approved quarries, free from cracks, weathered portions, laminations and other defects, accurately dressed to the specified dimensions with true beds and joints. the stones shall conform to the provisions of is 1597.size stones shall be used for wall face masonry and structural hearting, while the bond stones shall be provided as tie stones for effective transverse bonding, interlocking and strengthening of masonry in conservation works and the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, special size bricks 220mmx120mmx40mm- should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952 the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, rubbles stone for backfilling 15cm x 22.5cm- supply of hard, sound and durable natural rubble stones of minimum size 150 mm x 225 mm, obtained from approved quarries, free from cracks, weathered portions and other defects, hammer dressed in accordance with is 1129 and conforming to is 1597 (part 1). the stones shall have a minimum thickness of 225 mm, be laid with the broadest face on the prepared bed to achieve proper interlocking, with joints tightly packed using stone spalls. the finished pitching shall be suitable for dry or grouted stone pitching in conservation works and slope protection, the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, modular common brunt clay bricks of class designation 7.5 - should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952, cement mortar 1 into 4 where 1 part cement to 4 parts sand-ratio in which specify clean dry sand mention water as needed for workability also note its uses for example bricklaying blockwork and tile bedding and including material quality where opc cement type and standards like is codes in india ensuring consistency with measured proportions for strength., trowel sharp edge blades hardened and tempered highcarbon steei for durabitity staintess steei for rust resistance. handles smooth and seasoned hardwood or pvc. should be in accordance with lndian standards ls 1630 1984., trowel curve edge - blades hardened, tempered high-carbon steel for durability stainless steel for rust resistance. handles smooth, seasoned hardwood or pvc. should be in accordance with indian standards is 1630 (1984)., supply of wooden float of size 300 mm x 150 mm, manufactured from seasoned hardwood such as teak, pine, sheesham or equivalent, having a 10 to 15 mm thick smooth, flat base with slightly bevelled edges and fitted with an ergonomically designed top mounted wooden or high impact composite handle securely fixed with screws or resin bonding. the float shall be lightweight, durable and moisture-resistant, suitable for levelling, compacting and finishing lime mortar, plaster and concrete surfaces in conservation works, complete as approved by the engineer in charge, plastic buckets 25 liters - high-durability specifications to withstand rough handling, heavy loads, and exposure to construction materials like lime, mortar, and sand. made from high-density polyethylene (hdpe) or polypropylene (pp), offering impact resistance, chemical resistance, and uv protection for outdoor use. (the material sample approval should be taken from the office before supplying), aluminium screed 2inchx1inchx5feet supply of aluminium screed of size 2 inch x 1 inch x 5 feet, manufactured from high-strength extruded aluminium section, straight, lightweight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime concrete and plaster surfaces in conservation works, complete as directed by the engineer-in-charge, aluminium screed 2inchx1inchx3feet supply of aluminium screed of size 2 inch x 1 inch x 3 feet, manufactured from high-strength extruded aluminium section, lightweight, straight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime mortar and plaster surfaces in conservation works, complete as approved by the engineer-in-charge., curing pipe one inch 100 meter -supply of flexible pvc hose pipe of 25 mm (1 inch) diameter and 100 metres length, manufactured from premium quality pvc, weather-resistant, leak-proof and capable of withstanding normal working pressure, suitable for curing masonry, plaster and concrete works, complete with standard fittings wherever required, supply of industrial quality circular saw blade of 10inch diameter with 30 mm bore, manufactured from high-grade hardened and tempered alloy steel with 40 precision-ground teeth, heavy duty steel plate and optimized kerf width, provided with thermal expansion slots and friction-reducing coating for smooth, stable and reliable cutting with extended service life. the blade shall be easy to installation , suitable for cutting wood, plastics and non-ferrous metals, and compatible with professional cutting machines, complete as approved by the engineer in charge., rubber hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., cloth hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., gumboots should meet requirements such as water impermeability puncture resistance and slip resistant soles safety or protective footwear en iso 20345. it has a minimum impact resistance of 200 joules and compressive strength of at least 15 kn at the toe cap. the material sample approval should be taken from the office before supplying., safety helmet strong, rigid materials like high density polyethylene hdpe, abs, or polypropylene pp, dome shaped, without metallic parts, uv resistant. harness system suspension, impact absorption, penetration resistance, electrical insulation class g general, temperature resistance, standards and certifications is 2925the material sample approval should be taken from the office before supplying., safety goggles- should be impact-resistant polycarbonate lenses, uv protection, anti-fog scratch coatings, and a wraparound side-shield design for full coverage, fitting snugly and comfortably with ventilation, often meeting standards like ansi z87.1, ensuring protection from debris, dust, and radiation for construction environments. (the material sample approval should be taken from the office before supplying), supply of industrial quality multi purpose folding shovel manufactured from high strength metal, rugged, lightweight and corrosion-resistant, suitable for digging, chopping, scooping, hammering and scraping applications. the shovel shall be foldable for easy storage and portability, with an overall shovel length of approximately 23.25 inches 59 cm, saw length with handle of approximately 12.5 inches, integrated saw blade length of approximately 5.5 inches 14 cm, maximum weight of 525 g, and conforming to uiaa safety certification or equivalent, complete as approved by the engineer in charge, pvc round pan ghamela in which high grade virgin polyvinyl chloride or heavy duty polypropylene for high strength and flexibility. smooth interior surface crack and impact resistant, weather resistant for both indoor and outdoor use in which generally 5mm to 10mm thickness and shape is round open to top bowl and standard construction sizes usually 15 to 8 inches diameter and 10 kg to 20 kg load capacity. roughly 8 to 12 inches height. the material sample approval should be taken from the office before supplying., sieving mesh with wooden side frame with stand mechanism of size 2 feet x 5feet fabricated with ss304 ss316 stainless steel wire mesh of approved aperture and gauge securely fixed to a rigid hardwood frame teak neem or treated pine resistant to moisture decay and heavy usage. the unit shall be mounted on a sturdy wooden stand mechanism for convenient operation ensuring stability during sieving of sand surkhi lime and other construction materials used in conservation works. the mesh shall be corrosion resistant durable and free from defects complete as approved by the engineer in charge., plastic water storage pot supply of portable water storage pot manufactured from food-grade virgin high density polyethylene hdpe, polypropylene pp or pet plastic, free from bpa and harmful chemicals, suitable for safe storage of drinking and construction water. the pot shall be durable, leak-proof, uv resistant and provided with a tight fitting screw lid and leak proof plastic tap or dispensing arrangement, with integrated top handle or side grips for easy handling and transportation, complete as approved by the engineer in charge, water storage plastic drums 200l to 200 liters capacity, made of hdpe plastic, corrosion resistance, uv stability, and lightweight 8to10 kg empty removable lid with a metal or plastic locking ring clamp for easy filling, cleaning, and access. the material sample approval should be taken from the office before supplying, pvc water drum 2000 liters capacity of 2000 liter pvc water drum or tank typically feature like durable uv stabilized plastic cylindrical shapes varying thickness for strength and offering strong corrosion resistant storage for drinking industrial or agricultural water needs with options for multiple layers and specific fittings., supply of 2 hp single phase electric motor operating on 220to 240 v ac, 50 and 60 hz power supply, delivering 1.5 kw output with a rated speed of 1440 rpm 4pole or 2800 rpm 2pole and full-load current of 9.2 to 12 a. the motor shall be manufactured with 100 percentage copper windings, enclosed in a totally enclosed fan cooled tefc casing with ip55 protection against dust and water ingress, suitable for continuous operation in construction and conservation works, complete as approved by the engineer in charge., tarpaulin sheet 30 feet x 40 feet high-density polyethylene (hdpe) or multi-layered cross laminated (mlcl) materials, often with 120 gsm to 250 gsm (grams per square meter) thickness for durability, 100% waterproof and weatherproof and uv stabilized/protected (essential for long-term outdoor exposure)., disposable face mask supply of disposable 3ply non woven face mask comprising an outer hydrophobic spun bond non woven layer, a middle high density melt blown polypropylene filtration layer with bacterial filtration efficiency (bfe) of 95 to 99percentage, and an inner soft hydrophilic non woven layer for enhanced comfort. the mask shall be provided with high elastic soft ear loops and an integrated flexible plastic or aluminium nose clip to ensure a secure fit and minimize leakage, suitable for protection against dust and airborne particles during conservation and construction works, complete as approved by the engineer in charge., safety belt-- full-body harnesses (fbh) for fall arrest (dorsal d-ring), made from high-tenacity polyester and nylon webbing (min 44mm wide, 3mm thick) that withstands high tensile loads, featuring corrosion-resistant hardware, ergonomic padding, adjustable straps, and certifications like ce bis iso, ensuring comfort, proper fit, and critical fall-arrest force absorption for working at heights as per is 3521. (the material sample approval should be taken from the office before supplying), hammer 2kgs head with handle - head is hardened and tempered, typically ranging from hrc 48 to 58 for optimum toughness and to prevent shattering. square, double-faced, or hexagonal head with flat striking surfaces, handel made up of high-quality hardwood. two-colour carbon fiberglass shaft designed to absorb shock and reduce hand fatigue., chisel made up of high grade alloy steel, chrome vanadium crv steel or carbon steel for high durability. induction hardened tips around hrc 63 to 65. bevel edged, flat or pointed edge. the material sample approval should be taken from the office before supplying., sharping charges of chisel 5nos x 2times providing sharpening charges for 5 numbers of chisels, each sharpened twice, using mechanical grinding equipment to restore the cutting edge and maintain the required sharpness, profile and temper suitable for stone dressing, brick cutting and conservation works, complete as directed by the engineer-in-charge., gunny bags supply of good quality bt will woven jute gunny bags conforming to is 12650 into 2018 (standard btwill) or is 16186 2014 (lightweight sacking), having nominal dimensions of 94 cm x57 cm or 112 cm x 67.5 cm, fabricated from natural jute fibre with 3ply heracles stitched safety seams, durable and free from defects, suitable for storage and transportation of construction materials and for use in curing works during conservation works, complete as approved by the engineer in charge, aluminium wire 90m coil supply of pvc insulated aluminium wire in 90 metre coil of approved size 7 bar 20, manufactured with high-quality aluminium conductor and durable pvc insulation, providing safe, reliable and efficient current flow with good heat resistance. the wire shall be lightweight, flexible and easy to installation , suitable for domestic, commercial and light electrical wiring applications, complete as approved by the engineer-in-charge, switch box 4 module, switch and socket supply of 4 module modular switch box manufactured from fr grade polycarbonate for surface mounting or galvanized iron gi sheet for flush mounting, measuring approximately 135 mm x 75 mm to 150 mm x 90 mm, suitable for accommodating up to 4 modular units comprising switches and sockets. the switches shall have a current rating of 6a bar 10a or 16a 20a 25a as required, with a voltage rating of 240to 250v ac, 50 hz, and the socket shall be 6a or 16a shuttered type with child safety mechanism. the switch box shall be durable, corrosion resistant and suitable for indoor electrical installations, complete as approved by the engineer in charge., bulb led 18w supply of 18 w led bulb suitable for operation on 220 to 240 v ac, 50 hz power supply, having a minimum luminous flux of 1620 to 1908 lumens with an efficacy of 90 to 106 lumens and w. the bulb shall have a power factor of not less than 0.90, colour rendering index cri of 80 ra, surge protection of 2.5 to 4 kv, and an average service life of up to 25,000 hours, suitable for energy efficient indoor illumination, complete as approved by the engineer in charge., pointing trowel supply of professional quality pointing trowel with 150 mm 6 inch long and 75to80 mm wide blade, manufactured from high carbon steel or hardened mild steel with rust-resistant coating and blade thickness of approximately 1.0to1.2 mm. the trowel shall be fitted with a pvc or thermoplastic rubber tpr soft-grip handle of approximately 120to125 mm length, securely attached with a welded or riveted tang, lightweight and durable, suitable for accurate pointing, joint finishing and application of lime mortar in conservation works, complete as approved by the engineer in charge., wire brush supply of heavy-duty wire brush having an overall length of approximately 250 to 300 mm, provided with 3 or 4 rows of hardened carbon steel or iron wire bristles, securely stapled or embedded in a durable hardwood or moulded pvc handle. the brush shall be sturdy, corrosion resistant and suitable for manual cleaning of stone and brick masonry surfaces, removal of loose mortar, dirt, biological growth, rust stains and other surface deposits during conservation works, complete as approved by the engineer in charge., coir brush supply of 10 inch coir fibre handle brush fitted with 100 percentage naturally processed unbleached brown coir fibre bristles of 63 to 76 mm length, densely packed for effective scrubbing, securely fixed to a seasoned hardwood or country wood ergonomic handle. the brush shall be resistant to water, diluted acids and lime wash, biodegradable and free from plastic components, suitable for cleaning stone and brick masonry surfaces, removal of loose dust, lime deposits and surface contaminants during conservation and restoration works, complete as approved by the engineer in charge., transportation of materials providing transportation of approved construction materials from the source of supply to the work site by suitable vehicles, including safe loading, unloading, handling and stacking, ensuring the materials are protected from damage, contamination and moisture during transit, complete as directed by the engineer-in-charge., 50mm dia and 5mm thick hollow ms pipe supply of 50 mm diameter and 5 mm thick mild steel (ms) hollow pipe conforming to is 1161 or is 4923, manufactured from low carbon steel by the electric resistance welded (erw) process or seamless construction, having a minimum yield strength of 240 mpa and tensile strength of 410 mpa. the pipe shall be supplied in standard lengths, true to size, straight, free from dents, cracks and surface defects, with black or hot-dip galvanized finish as specified, suitable for fabrication of grills, railings, fencing, supports and other structural components in conservation works, complete as approved by the engineer-in-charge, 2 nos ms steel 15mm thick inter lock chainage supply of 2 numbers of mild steel ms interlocking chainage plates, manufactured from 15 mm thick ms plates conforming to is 2062 grade e250 a andb, precision cut by laser or cnc process and provided with accurately machined interlocking arrangement for secure and slip free coupling. the plates shall have a minimum yield strength of 250 mpa and tensile strength of 410 to 540 mpa, with high visibility engraved or punched chainage markings as per approved drawings, suitable for alignment, chainage marking and structural applications in conservation works, complete as approved by the engineer in charge, supply of synthetic enamel paint based on modified alkyd resin, having a high gloss finish minimum 85 percentage at 60 degree angle, with 40to 45percentage volume solids and suitable viscosity for brush, roller or spray application. the paint shall provide a dry film thickness of 20 to 35 microns per coat with a theoretical coverage of 10 to 15 m square per litre per coat, and shall be compatible with approved enamel thinners. it shall possess good adhesion, flexibility, resistance to moisture, water, oils, mild industrial fumes and intermittent salt spray and suitable in conservation works, complete as approved by the engineer in charge, carriage of rubbish item providing carriage of rubbish, debris, dismantled materials and other unserviceable waste generated during conservation works from the work site to an approved disposal location by suitable means of transport, including safe loading, unloading and disposal in accordance with local regulations, ensuring the monument premises are kept clean and free from obstructions, complete as directed by the engineer-in-charge.
Agency / Dept :
archaeological survey of india ASI
Due Date :
Sep 11, 2026 (11 days left)
Tender Value :
34.41L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15629029
Location : howrah , west bengal
tender for set of gauges for checking screw coupling of transition cbc. the above item consists of 06 various types of gauges as follows: 1) condemning gauge for short shackle screw coupling size: go-29.50 mm & no go-25.0 mm. asper rdso drg. no. 4685 & rdso-mp-mi-no-25. rev.0, jan 2006. material specification: tool steel to is no. 3748/90. hardness 50/55 hrc. qty = 1 no/set. 2) condemning gauge for long shackle screw coupling size: go-45.0 mm & no go-39.50 mm. as per rdso drg. no. 4685 & rdso-mp-mi-no-25. rev.0, jan 2006. material specification: tool steel to is no. 3748/90. hardness 50/55 hrc. qty = 1 no/set. 3) condemning gauge for checking the play between the hole short shackle & trunion screw pin condemning size: 187.0 mm. as per rdso drg. no. 4685 & rdso-mp-mi-no-25. rev.0, jan 2006. material specification: tool steel to is no. 3748/90. hardness 50/55 hrc. qty = 1 no/set. 4) condemning gauge for checking the play between the hole long shackle & trunion nut pin condemning size:278.0 mm. as per rdso drg. no. 4685 & rdso- mp-mi-no-25. rev.0, jan 2006. material specification: tool steel to is no. 3748/90. hardness 50/55 hrc. qty = 1 no/set. 5) screw pitch gauge (go & no go) (knuckle thread -lh) size: r- 1.404mm & r-1.625 mm. as per rdso-mp-mi-no25. rev.0, jan 2006. qty = 1 no/set. 6) screw pitch gauge (go & no go) (knuckle thread - rh) size: r1.515 mm & r- 1.625 mm. qty = 1 no as per rdso-mp-mi-no-25. rev.0, jan2006. qty = 1 no/set., set of gauges for checking screw coupling of transition cbc. the above item consists of 06 v arious types of gauges as follows: 1) condemning gauge for short shackle screw coupling size: go-29.50 m m & no go-25.0 mm. asper rdso drg. no. 4685 & rdso-mp-mi-no-25. rev.0, jan 2006. material specifica tion: tool steel to is no. 3748/90. hardness 50/55 hrc. qty = 1 no/set. 2) condemning gauge for long sha ckle screw coupling size: go-45.0 mm & no go-39.50 mm. as per rdso drg. no. 4685 & rdso-mp-mi-no- 25. rev.0, jan 2006. material specification: tool steel to is no. 3748/90. hardness 50/55 hrc. qty = 1 no/s et. 3) condemning gauge for checking the play between the hole short shackle & trunion screw pin conde mning size: 187.0 mm. as per rdso drg. no. 4685 & rdso-mp-mi-no-25. rev.0, jan 2006. material specifi cation: tool steel to is no. 3748/90. hardness 50/55 hrc. qty = 1 no/set. 4) condemning gauge for checki ng the play between the hole long shackle & trunion nut pin condemning size:278.0 mm. as per rdso drg . no. 4685 & rdso-mp-mi-no-25. rev.0, jan 2006. material specification: tool steel to is no. 3748/90. hard ness 50/55 hrc. qty = 1 no/set. 5) screw pitch gauge (go & no go) (knuckle thread -lh) size: r- 1.404m m & r-1.625 mm. as per rdso-mp-mi-no25. rev.0, jan 2006. qty = 1 no/set. 6) screw pitch gauge (go & no go) (knuckle thread - rh) size: r1.515 mm & r- 1.625 mm. qty = 1 no as per rdso-mp-mi-no-25. rev .0, jan2006. qty = 1 no/set. - warranty period: 30 months after the date of delivery pl code : 200035160022
Agency / Dept :
south eastern railway SER
Due Date :
Jun 17, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Screw Pitch Gauge. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Screw Pitch Gauge sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Screw Pitch Gauge Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Screw Pitch Gauge, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Screw Pitch Gauge Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Screw Pitch Gauge Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Screw Pitch Gauge.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Screw Pitch Gauge depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Screw Pitch Gauge Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Screw Pitch Gauge bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Screw Pitch Gauge. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Screw Pitch Gauge, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Screw Pitch Gauge, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Screw Pitch Gauge?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Screw Pitch Gauge tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Screw Pitch Gauge?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Screw Pitch Gauge, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Screw Pitch Gauge is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All