sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

107Latest Nylon sleeve Tenders List

Latest Nylon sleeve Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Nylon sleeve tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Nylon sleeve tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Nylon sleeve Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Nylon sleeve tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Nylon sleeve Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Nylon sleeve Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Nylon sleeve Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Nylon sleeve tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Nylon sleeve Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Nylon sleeve sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Nylon sleeve tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Nylon sleeve tenders.

Is EMD mandatory for all Nylon sleeve tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Nylon sleeve work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Nylon sleeve tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Nylon sleeve Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17788292
Location : chennai , tamil nadu
NEW TENDER
tender for supply of raincoats, supply of raincoats as per specification. 1. material : fabric made of nylon and coate d with pvc. 2. nylon fabric as per identification of textile fiber to is 667 / 1981 ra 2008. 3. res istance to water penetration, all seams and joint should be taped from inside with heat sea l. 4. mass of finished material ( gsm ) 206+/-10% g/m2. 5. shirt pocket - 02 nos in front side of the j acket. 6. reflective luminous strips at rear side with a quote of engineering branch - salem division(engg. - sa div/indian railways 7. visor or brim extensions: a raincoat with an exten ded hood might also come with a built-in visor or brim to help keep rain from dripping into the face. 8. full sleeves - baggies style. 9. zipper -polymeric non-rusted with extra zipper construction of ver having velcro wrist. 10. adjustable hood with a adjustable with tying cord. 11. full rou nd elastic type trouser with two pockets,one on each side. 12. breaking strength warp - 50 kg + 10 kg & weft 40 kg + 10 kg. 13. colour : black, blue, brown, khaki. 14. sizes required : med ium, large, xl, xxl, xxxl, xxxxl. 15. brand / make - decathalon, duck back , real, wildcraft, zo om. 16. the rain suit should be kept in a pouch with zip with size duly marked. 17. all rain sui ts should have a label of manufacturer name, size and year of mfg. 18. test certificate fro m any authorised nabl approved lab for fabric & thickness required. 19. three nos sample t o be submitted for approval for feel & finish of the product by the consignee for approval within 15 days of receipt of p.o. 20. testing of rain suits will be done by us at any nabl appro ved lab for fabric & thickness from the bulk supplies. 21. inspection by tpi. along with sample, size chart for size vs dimensions to be given to consignee. based on the chart, the consignee to provide ex act split up of size-quantity to supplier. only after sample approval and split up of size-quantity, supplier to effect bulk supply. - warranty period: 30 months after the date of delivery -quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs
Agency / Dept :
southern railway SR
Due Date :
Oct 29, 2026 (14 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17789130
Location : liluah , west bengal
NEW TENDER
tender for set of protection sleeve for all, set of protection sleeve for all types of electrical wire/ cable connection of v arious equipments of ac emu & mrvc rakes to material nylon grade 66. size & dimensions - 1)1 0 mm - 100 mtrs/set., 2) 20 mm - 200 mtrs/set., 3) 40 mm - 100 mtrs/set. material should be fire retard ant with test certificate. - warranty period: 30 months after the date of delivery
Agency / Dept :
eastern railway ER
Due Date :
Nov 03, 2026 (19 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17758469
Location : ri bhoi , meghalaya
Source : GEM Tenders
LIVE TENDER
tender for tubular towel rail 20 mm dia 600 mm long body , plywood 8ftx4ftx19mm bwr , beeding teak wood 4 mm thick x 20 mm half round , paint enamelled black in 1 ltrs pack high glossy , door stoper alumunium , paint enamelled white in 1 ltrs pack high glossy , french polish , red oxide primer , float valve pvc 25 mm , ply wood commercial 8ftx4ftx 8mm isi marke , toilet paper holder with stainless steel flap 15mm , single lever basin mixer 6inch , bib cock cp 2 in 1 15mm , fevicol sh 1 kgs pack , butt hinges ms 100mm , cp soap dish , cpvc mta brass 20mm , curtain rod aluminium silver 20mm , waste pipe pvc 32 mm , seat and back for chair school bucket type , cpvc reducer socket 20x15mm brass , jet spray 1point 5m tube 15mm , knob for side board oblique dressing table writing table , connection pipe pvc size 15mm x 450 mm , pvc angle cock 15 mm , gi tubing med gde 20 mm , curtain bracket aluminium silver 20mm , thinner , cpvc socket brass 20mm , gi tubing med gde 15 mm , cpvc pipe 15mm, prayag , teflon tape white , curtain rod holder lattu 20mm silver , aluminium door handle 100mm , nipple gi 20 mm 8inch long , full thread screw 25 mm 250 grm each , pvc seat and back for chair verandah offrs , nipple gi 20 mm 2inch long , gate valve with brass spindle 20 mm , cpvc mta brass 15mm , aluminium door handle 150mm , cpvc fta brass 20mm , cpvc solvent cement 100ml , union socket 20mm , float valve pvc 15mm , melamine high glossy , cpvc pipe 20mm , distemper oil bound white , cpvc brass elbow 20mm , sliding door bolt alu 300mm , dendrite 1 ltrs pack , oil putty for glazing , cloth mal mal oblique cheese cloth , butt hinges ms 75 mm , cpvc brass elbow 15mm , ms handle 100mm , nipple gi 15 mm 6inch long , cpvc plain elbow 20mm , nipple gi 15 mm 2inch long , nipple gi 15 mm 4inch long , cpvc ball valve 20mm , cpvc tank connector mt oblique ft 20mm , tower bolt alu 150 mm , cpvc socket brass 15mm , sliding door bolt ms 300mm , m seal , wooden beads for fixing glass 2nd class seasoned size 10 mm x 10 mm x 1 mtr long , pvc shelf heavy duty 450 mm , cement opc 50 kgs each bags , magnetic catcher , gi elbow 15 mm , ms screw wood 35 mm x 8 gauge 100 grm each packet , gi tee 15 mm , curtain bracket steel 15mm , pvc stop cock internal thread 15mm , helicol door spring 150mm , masonary screw full thread 20mm 250 grm each , nipple gi 20 mm 4inch long , gi socket 20 mm , gi socket 15 mm , cpvc socket plain 20mm , union socket 15mm , gi elbow 20 mm , nails wire steel 75mm 1 kg each , white cement , ms screw wood 25 mm x 8 gauge 100 grm each , tower bolt ms 125 mm , cpvc ball valve 15mm , pegs alluminium 100 mm , gi nipple 15 mm 8inch long , grating pvc 125 mm , gi tee 20mm , curtain bracket alu 15mm , gi reducer socket 20x15mm , nipple gi 20 mm 6inch long , cpvc plain tee 20mm , cpvc union ball valve plain 20mm , gi reducer socket 25x20mm , cpvc plain elbow 15mm , waste coupling 32 mm stainless steel for whb , pvc flush bend 40 mm , pvc tank nipple 20mm , painting brush 75mm , painting brush 50mm , haps and stapple alu 100 mm , cpvc union plain socket 20mm , curtain rod aluminium 15mm , ms screw wood 15 mm x 6 gauge 100 grm each , ms wood screw 30mm 100 grm each , nails wire 40mm 100 grm each , cpvc pipe clip 20mm , nylon sleeve 35mm pvc wall plug , tower bolt ms 150 mm , cpvc reducer socket 20x15mm plain , tower bolt alu 125 mm , ms handle 150mm , grating cp 100 mm with hole , cpvc, kitchen rack ss superior quality size 36inch x 36inch x 10inch, kitchen sink 36inch x 18inch x 7inch stainless steel with drainage board, ply wood commercial as per is 3003 8ftx4ftx12mm, mirror looking 20inch x 16inch with pvc frame, bathroom cabinet mirror pvc 432 x 11mm, cushion with cover for sofa set 40 density 100 mm thick size 20inch x 21 inch, cp health faucet with hook and 1 mtr tube15mm, plywood commercial 7ft x 3ft x 12 mm bwr, kitchen rack ss 24inch x 30inch x 10inch, bitumin felt 20mtrx1mtr x 3mm, float valve pvc 20 mm, sunmica of size 8ftx 4ftx 1 mm thick teak face, particle board prelaminated 2400 x 1200 x 12mm, curtain rod redge steel 15 mm, touch wood in 1 ltrs pack, paint enamelled og in 1 ltrs pack high glossy, pvc seat for chair dining, block board 8ftx4ftx19mm bwr, pvc pipe 40mm x 3 mtr long, shower rose cp 15 mm, telescopic channel 12 to 24 inch, paint enamelled grey in 1 ltrs pack high glossy, glass shelf straight 20inch with cp railing 15mm, wire mesh gi 0 point 56 mm nominal dia of wire and average width of aperature 1point 18mm, mirror for dressing table ladies 48inch x 18inch fd 251, plywood commercial 8ft x 4ft x 4 mm isi mark, seat cover plastic for ewc white colour, pvc waste coupling 50 mm for stainless steel kitchen sink, ply teak face 8ft x 4ft x 4 mm, glass shelf corner 12inchx12inch with cp railing 15mm, cp tubular towel rail 20 mm dia 600 mm long body, plywood 8ftx4ftx19mm bwr, beeding teak wood 4 mm thick x 20 mm half round, paint enamelled black in 1 ltrs pack high glossy, door stoper alumunium, paint enamelled white in 1 ltrs pack high glossy, french polish, red oxide primer, float valve pvc 25 mm, ply wood commercial 8ftx4ftx 8mm isi marke, toilet paper holder with stainless steel flap 15mm, single lever basin mixer 6inch, bib cock cp 2 in 1 15mm, fevicol sh 1 kgs pack, butt hinges ms 100mm, cp soap dish, cpvc mta brass 20mm, curtain rod aluminium silver 20mm, waste pipe pvc 32 mm, seat and back for chair school bucket type, cpvc reducer socket 20x15mm brass, jet spray 1point 5m tube 15mm, knob for side board oblique dressing table writing table, connection pipe pvc size 15mm x 450 mm, pvc angle cock 15 mm, gi tubing med gde 20 mm, curtain bracket aluminium silver 20mm, thinner, cpvc socket brass 20mm, gi tubing med gde 15 mm, cpvc pipe 15mm, prayag, teflon tape white, curtain rod holder lattu 20mm silver, aluminium door handle 100mm, nipple gi 20 mm 8inch long, full thread screw 25 mm 250 grm each, pvc seat and back for chair verandah offrs, nipple gi 20 mm 2inch long, gate valve with brass spindle 20 mm, cpvc mta brass 15mm, aluminium door handle 150mm, cpvc fta brass 20mm, cpvc solvent cement 100ml, union socket 20mm, float valve pvc 15mm, melamine high glossy, cpvc pipe 20mm, distemper oil bound white, cpvc brass elbow 20mm, sliding door bolt alu 300mm, dendrite 1 ltrs pack, oil putty for glazing, cloth mal mal oblique cheese cloth, butt hinges ms 75 mm, cpvc brass elbow 15mm, ms handle 100mm, nipple gi 15 mm 6inch long, cpvc plain elbow 20mm, nipple gi 15 mm 2inch long, nipple gi 15 mm 4inch long, cpvc ball valve 20mm, cpvc tank connector mt oblique ft 20mm, tower bolt alu 150 mm, cpvc socket brass 15mm, sliding door bolt ms 300mm, m seal, wooden beads for fixing glass 2nd class seasoned size 10 mm x 10 mm x 1 mtr long, pvc shelf heavy duty 450 mm, cement opc 50 kgs each bags, magnetic catcher, gi elbow 15 mm, ms screw wood 35 mm x 8 gauge 100 grm each packet, gi tee 15 mm, curtain bracket steel 15mm, pvc stop cock internal thread 15mm, helicol door spring 150mm, masonary screw full thread 20mm 250 grm each, nipple gi 20 mm 4inch long, gi socket 20 mm, gi socket 15 mm, cpvc socket plain 20mm, union socket 15mm, gi elbow 20 mm, nails wire steel 75mm 1 kg each, white cement, ms screw wood 25 mm x 8 gauge 100 grm each, tower bolt ms 125 mm, cpvc ball valve 15mm, pegs alluminium 100 mm, gi nipple 15 mm 8inch long, grating pvc 125 mm, gi tee 20mm, curtain bracket alu 15mm, gi reducer socket 20x15mm, nipple gi 20 mm 6inch long, cpvc plain tee 20mm, cpvc union ball valve plain 20mm, gi reducer socket 25x20mm, cpvc plain elbow 15mm, waste coupling 32 mm stainless steel for whb, pvc flush bend 40 mm, pvc tank nipple 20mm, painting brush 75mm, painting brush 50mm, haps and stapple alu 100 mm, cpvc union plain socket 20mm, curtain rod aluminium 15mm, ms screw wood 15 mm x 6 gauge 100 grm each, ms wood screw 30mm 100 grm each, nails wire 40mm 100 grm each, cpvc pipe clip 20mm, nylon sleeve 35mm pvc wall plug, tower bolt ms 150 mm, cpvc reducer socket 20x15mm plain, tower bolt alu 125 mm, ms handle 150mm, grating cp 100 mm with hole, cpvc socket plain 15mm, cpvc fta plastic 20mm, sand paper no 150 mm, gi plug 20 mm, hacksaw blade, gi plug 15 mm, cpvc end cap 20mm, nails wire 20mm 100 grm each, ms screw wood 25 mm x 6 gauge, gi union 25 mm, nails wire steel 50 mm 100 grm each, ms screw wood 65 mm x 8 gauge 100 grm each, ms screw wood 50 mm x 8 gauge 100 grm each, ms screw 60mm x 8 mm 100 grm each, ms wood screw 75mm 100 grm each, cpvc plain tee 15mm, nails wire steel 25 mm 100 grm each, nails wire steel 100mm, nails wire 15mm 100 grm each, ms screw wood 20 mm, hacksaw blade 300 mm
Agency / Dept :
indian army
Due Date :
Oct 20, 2026 (5 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17469740
Location : bashohli , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for point 5 sqmm , pin type copperr lug 2 point 5 sqmm tin plated with insulating sleeve , cu pin type lugs 4 mm square , u type copper cu lugs 1 point 5 sqmm , u type copper cu lugs 2 point 5 sqmm , copper lugs 2 point 5 sqmm ring type , ring type copper lugs 4 sqmm , lugs copper 6 sqmm , lugs copper 10 sqmm , lugs copper 16 sq mm , cu ring type lugs 25mm square , tinned copper lug 35 sq mm , lugs copper 50 sq mm , cu ring type lugs 70 mm square , glass fuse 1amp 250v , glass fuse 2amp 250v , glass fuse 4a , glass fuse 10a , heat shrink tubing sleeve size 8mm , heat shrink tubing sleeve size 16mm , fexible heat shrink sleeve pvc tubing size 25 point 4 mm , fiber insulation sleeve in pipe shape 12 mm id , fiber insulation sleeve in pipe shape 16 mm id , ptfe wire size 1 sqmm , iron soldering 25w , soldering iron 100watt , solder wire , insulated electrician screw driver m4 tip size zero point 6x 4 mm blade length 150mm , insulated electrician screw driver m8, tip size 1 point 2x 8 mm blade length 200mm , hacksaw frame 2bb 12 inch , power hacksaw blade , emery cloth rough 50m , emery cloth fine 50m , high dielectric red insulating varnish 500ml can , insulated red gel varnish spray 500ml for class f insulation , hardner for red anti tracking paint , nylon thread 50 m roll , holdite gasket sealing compound 500 gm pack , silicone tube , slide wrench 6 inch , slide wrench 8 inch , slide wrench 12 inch , crimping tools , tubular spanner set 6x7 and 8x9 and 10x11 and 12x13 and 14x15 and 16x17 and 18x19 and 20x22 and 21x23 and 24x27 and 25x28 and 30x32 , spider crimping tool capacity zero point 5 mm square to 6 mm sqaure , umbrella , dangri , rain suit three piece pant shirt and cap , hrc fuse ns type 2amp , hrc fuse 4amp 415v bs type ns type , hrc fuse 6a ns type , hrc fuse 10a ns type , hrc fuse 16a ns type , hrc fuse 20ans type , hrc fuse 32a ns type blade concacts , brush for battery terminals cleaning , carbon paper black , dail gauge with magnetic base least count zero point zero 1 mm , chemical or acid proof hand gloves , heating rod for heat pillar , ht tape insulation roll , hydrometer for measuring battery water specific gravity range 1100 to 1300 , cable tie 100mm , cable tie 500mm , 33kv heat shrinkable end termination jointing kit for 3x95 sqmm xlpe cable , 11 kv indoor termination kit 3x120 sqmm , 11 kv outdoor termination kit 3x120 sqmm , 20w led tubelight with batten , neoprene bonded rubbrised cork sheet size 915x915x6 mm , neoprene bonded rubbrised cork sheet size 915x915x8 mm , neoprene bonded rubbrised cork sheet 915x915x10mm , complete o ring set , lan cable link tester , wooden screw 1 inch , wooden screw 1 point 5 inch , wooden screw 2 inch , wooden screw 2 point 5 inch , rechargeable led head torch , round file 250 mm long , angle grinder machine 100 mm , cutting wheel 100 mm , grinding wheel ag4 dia 100 mm , heavy duty welding safety head screen with window , scissor big , electrical safety hand gloves suitable for 33kv, miscellaneous electrical consumables, as per technical specification
Agency / Dept :
national hydroelectric power corporation limited nhpc limited
Due Date :
Oct 17, 2026 (2 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17494837
Location : bangalore , karnataka
Source : GEM Tenders
LIVE TENDER
tender for frame for drone configuration hex composition high grade 3k twill carbon fiber frame size reference eft 6120 x hex compliance features , crash kit frame for cannibalisation of parts configuration hex composition high grade 3k twill carbon fiber frame size reference eft 6120 x hex compliance features , motor for drone integrated motor esc with mount max thrust 11 point 8kg at rate sea level takeoff weight 5 point 5kg battery 12s by 14s lipo input voltage range , flight controller general parameters equivalence expected processor 32 bit arm cortex m7 or higher processing speed 400 mhz or higher construction of processor fail safe 32 bit , gps onboard hi multi band gps convergence priority for indigenous gps by gnss module meeting above parameters and and proven performance in challenging conditions , current voltage module 3x isolated power outputs for 12v 5 point 5v and addl redundancy 10 ampere current h , sensor module current and voltage sensor module for appreciating drain current 60a voltage 200v , txmtr module transmission and range 40 km communication range point it freq hopping 2 point 4 ghz and 5 ghz 7 inch lcd touchscreen , telemetry 50 km long range telemetry module , laser based drone mountable scanner 360 degree laser scanner kit with range 0 point 2 m to 12 m , electro optic camera ai tracking gimbal camera 30x digital zoom 640x512 thermal and range finder , xt 30 connector standard heatproof high qulaity material , xt 60 connector standard heatproof high qulaity material , amass xt 60 female amass xt 60 female , amass xt 90s amass anti spark connector with housing f , amass xt 90 amass anti spark connector with housing , amass 150u amass as 150 u female connector cable 8 awg 35 cm , wire red 8 awg heat proof wire red 1 meter , wire balck 6 awg heat proof wire red 1 meter , battery for cold 22000mah 12 s smart battery , battery charger ultrapower up 4000 14s 2x 2000w 40 amp 6 to 14 s intelligent chrger , damper vibration damper rubber 4mm , sleeve globomotive nylon braided cable wire management sleve usb cable power audio video cable dia 0 point 25 inch 5 feet , connector jst gh connector 8 pin , bomb carrying unit 4 x rotating release mechanism suitable for releasing 4 x 81mm bomb point replaceable by explosive bomb point , ai module onboard jetson nano with database for military target recognition and also for tracking and capable of giving guidance to mavlink for drone independent tracking mode, rudrastra qty 01, as per tech specification
Agency / Dept :
indian army
Due Date :
Oct 16, 2026 (1 day left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17494868
Location : north 24 paraganas , west bengal
Source : GEM Tenders
LIVE TENDER
tender for scania ord 0065 - tape 1by2 non addesive part no nk , 8mm nut with bolt aps part no nk , 10mm nut with bolt aps part no nk , 12mm nut with bolt aps part no nk , 13mm nut with bolt aps part no nk , 14mm nut with bolt aps part no nk , 16mm nut with bolt aps part no nk , 17mm nut with bolt aps part no nk , screw aps part no nk , screw with nut 1point5 aps part no nk , sleeving plastic 4mm aps part no y3niv , sleeving plastic 6mm aps part no y3niv , sleeving plastic 10mm aps part no y3niv , sleeving plastic 20mm aps part no y3niv , lock tight 510 50ml part no nk , self locking nylon cable zip type 2point5x10 part no nk , battery terminals brass heavy duty aps part no nk , screw 4mmx20mm 100pcs part no nk , 6mm bolt with nut and washer 30mm length part no nk , aluminium blind rivet 40mm part no nk , aluminium blind rivet 3by4 large head part no nk , aluminium blind rivet 3by4 part no nk , aluminium blind rivet 1 inch part no nk , aluminium blind rivet 1by2 part no nk , counter shunk screw aps part no nk , star head screw part no nk , washer assorted part no nk , flour mat 4mmx6ftx8ft for crew cabin part no nk , soft cut putty part no nk , polyester putty part no nk , french chalk part no nk , screw 4mmx20mm part no nk , screw 5mmx27mm part no nk , dendrite adhesive part no 8020000021 , flour mat 4mm thick part no nk , automotive heat insulation mat 4mm thick part no nk , rivet 1by2 aluminium part no nk , aluminium sheet 1mmx4point5ftx8ft part no 9535000019 , welding electrodes 2point5x350 part no 3439000016 , cloth mulmul part no nk , pasting hard board 4mmx4ftx8ft part no nk , nut bolt with doom washer aps part no nk , i let male crimp aps, thinner antichill, paint red oxide, paint synthetic enamel red, tape plastic insulation 1by2 black, lt wire red 1point5sq mm 25m finolex, lt wire black 1point5sq mm 25m finolex, lt wire yellow 1point5sq mm 25m finolex, lt wire white 1point5sq mm 25m finolex, lt wire violet 1point5sq mm 25m finolex, lt wire green 1point5sq mm 25m finolex, anabond gasket maker red 85gms tube, lock tight 243 50ml, caustic soda, eyelet i type female 100pcs, eyelet i type male 50pcs, eyelet o type 2mm 100pcs, eyelet o type 6mm 100pcs, eyelet o type 8mm 100pcs, bty cable red 120 sq mm, bty cable black 120 sq mm, aluminium angle 2mmx24mmx24mm, aluminium half round strap 2mmx30mm, rexine black patterned, araldite, solder, soldring flux, aluminium rivet b43, paint synthetic enamel olive green, masking tape 48mmx20mtrs, bilux polyster putty, spl ps gray putty, feviquick 3grms, automotive auto stripper spray, abrasive silicon carbide 120, abrasive silicon carbide 80, paint matte black spray cane, cotton waste, thread seal tape, loom tape 1by2 non addesive, 8mm nut with bolt aps, 10mm nut with bolt aps, 12mm nut with bolt aps, 13mm nut with bolt aps, 14mm nut with bolt aps, 16mm nut with bolt aps, 17mm nut with bolt aps, screw aps, screw with nut 1point5 aps, sleeving plastic 4mm aps, sleeving plastic 6mm aps, sleeving plastic 10mm aps, sleeving plastic 20mm aps, lock tight 510 50ml, self locking nylon cable zip type 2point5x10, battery terminals brass heavy duty aps, screw 4mmx20mm 100pcs, 6mm bolt with nut and washer 30mm length, aluminium blind rivet 40mm, aluminium blind rivet 3by4 large head, aluminium blind rivet 3by4, aluminium blind rivet 1 inch, aluminium blind rivet 1by2, counter shunk screw aps, star head screw, washer assorted, flour mat 4mmx6ftx8ft for crew cabin, soft cut putty, polyester putty, french chalk, screw 4mmx20mm, screw 5mmx27mm, dendrite adhesive, flour mat 4mm thick, automotive heat insulation mat 4mm thick, rivet 1by2 aluminium, aluminium sheet 1mmx4point5ftx8ft, welding electrodes 2point5x350, cloth mulmul, pasting hard board 4mmx4ftx8ft, nut bolt with doom washer aps, i let male crimp aps, cello tape 4inch
Agency / Dept :
indian army
Due Date :
Oct 16, 2026 (1 day left)
Tender Value :
3.99L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17567583
Location : gwalior , madhya pradesh
Source : GEM Tenders
LIVE TENDER
tender for hexacopter , motor and 2480 folding , motor and 2480 folding , fc standard set , gps standard gps , telemetry , digital image transmission , thermal camera , max radio controller , dual 1- watt express , power module , antenna tracker , 21db high gain directional patch antenna , module for air unit , a1254-08y-1.25mm-8pin female gh housing , dual-band express , nylon 16mm expandable , drone battery set , battery strap belt , drone charger set , casing for pro drone , dropping mechanism - 1pcs , laptop and accessories, drone kits for garrison decurity, drone frame, propeller combo kit- cw, propeller combo kit-ccw, ads-b, ghr 1.25mm 10pin, sky and base unit, fpv system, 640px, (m2) - 4 in1-black, lrs module, pm02, compatible with ground unit, irs2405878517, bec, connector with 300mm wire 28 awg, lrs reciver, braided sleeve for wire protection- 2m length, battery, reusable cable tie wrap, charger, casing, mechanism, laptop
Agency / Dept :
indian army
Due Date :
Oct 22, 2026 (7 days left)
Tender Value :
47.99L
View Documents
T18 Ref No : 17568357
Location : kanpur , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for assortment gt2 pulleys or spur gears or pulleys or shafts or couplers or bearings , structural and fastener assortment metal strips or acrylic plates or standoffs or nut-bolt-washer , sheet material assortment acrylic and thin mdf or balsa , mini fluidics hardware assortment hose connectors-t-joints and valves-clamps , adhesive tape assortment velcro and double-sided foam , cordage assortment spiral wrap or cable sleeve and nylon cord , motor and stepper driver module assortment l298n or tb6612fng or l293d or a4988-drv8825 or uln2003 , dc- dc converter module assortment buck and boost , storage container assortment bins or organizer box or project tray , regulated dc power adapter assortment 5v or 3a and 12v or 2a , battery charger module assortment nimh smart charger and tp4056 li-ion , environmental sensor assortment flame or smoke-gas or air quality or temp- humidity or rain , water and fluid sensor assortment soil moisture or water level or float or flow or turbidity or tds- ec or ph , motion and vibration sensor assortment imu or tilt or vibration or piezo knock , load and electrical sensing assortment load cell or current or voltage-power , proximity and optical sensor assortment pir or ultrasonic or ir or ldr or light or break-beam or hall or colour , lab dc motor assortment tt geared and small hobby , buzzer module assortment active and passive , relay module assortment 1-channel and 4-channel , io expansion shield assortment arduino and esp32 , short-range wireless module assortment bluetooth and 2.4ghz transceiver , microsd storage and reader module assortment , sheet stock assortment foam board or corrugated cardboard or pvc-pp corrugated , 18650 li-ion cell and holder assortment , lipo safety accessory assortment balance charger and fire-resistant bag , robotic end-effector assortment gripper kit and hand or finger linkage parts , mechanism demo kit assortment crane or elevator or drawbridge-gate , webcam and tripod stand assortment , small digit or matrix display assortment oled or 7- segment or led matrix , arduino uno r3 compatible development board , arduino nano compatible board , esp32 wi-fi plus bluetooth development board , esp32-cam or camera-enabled wi-fi board , raspberry pi pico or rp2040 board , raspberry pi 5 or equivalent sbc , breadboard power supply module , i2c bidirectional logic level converter , usb programming cable set - usb-a or usb-c or micro-usb , usb-to-ttl serial adapter , mfrc522 rfid reader module , rfid cards or tags assortment , 4x4 matrix keypad , capacitive touch sensor module , microphone or sound detection sensor , reed switch module , rotary encoder module , ds3231 rtc module , gps module , micro servo sg90-class , high-torque servo mg996r-class , 28byj-48 stepper motor , nema 17 stepper motor , mini submersible dc water pump , peristaltic or diaphragm mini pump , 5v or 12v brushless cooling fan , mini linear solenoid , electromagnet module , vibration motor module , rgb led module , traffic light led module , 16x2 lcd with i2c backpack , 1.8-2.4 inch spi tft display , logic-level mosfet driver module , inline blade fuse holder plus low-current fuse assortment , 433mhz rf transmitter plus receiver set , lora transceiver module pair , sim800l or sim7600 gsm module , wi-fi router or access point , 5- port ethernet switch , laptop computer , usb hub , wireless keyboard and mouse set , hdmi cable , usb flash drive 32-, lab innovation robotics kit, as per attached item specification
Agency / Dept :
indian institute of technology IIT
Due Date :
Oct 22, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17741083
Location : baramulla , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for 6x station multi gym , adjustable bench , curve manual treadmill , magnetic elliptical bike , medicine ball , battle rope equipment , multi function smith machine , multi abdominal bench machine , gym stability ball , multi purpose bench , weighing machine , yoga mats , static cycle , assisted pull up machine, gym eqipments, technical specifications to include dimensions of machine to be 32 cm (l) x 240 cm (w) x 230 cm (h) with arc cover for protection and comfortable seat pads, product weight to be 500 to 600 kg, product with powder coated corrosion resistant material., technical feature to include anti-slip rubber feet for stability and floor protection, compact and space efficient design, product with powder coated corrosion resistant, maximum user weight capacity to be 200 to 250 kg, bench dimension to be 120 to140 cm (l), 40 to 45 cm (w), 45 to 55 cm (h), product weight to be 18 to 30 kg., key features to include heavy duty ac motor (220v- 240v, ac 50 hz) with 6 hp capacities and large lcd screen with blue back light, speed range to be 1 to 24 kmph, incline angle to be 0 to 20 deg, dimension to be 200 cm x 90 cm x 153 cm (l, w, h), readouts on screen should have time, speed, distance, incline, calories, 10-20 preset programs and emergency stop key with overload surge protection.3.3 technical specifications to include max weight of 150 -180 kgs, belt thickness to be 1.6 - 2.2 mm, multi-layer anti-static belt, net weight of machine to be 120 -150 kgs., technical specifications to include frame of heavy duty steel with powder coated rust resistant and large anti-slip pedals. flywheel weight to be 5-8 kgs with max user weight to be 120 - 150kg, machine dimensions to be appx 1100 x 600 x 1600 mm with net weight of equipment to be 30-50 kgs, no external power requirement., technical specifications to include diameter of ball to be 20 - 25 cms and preferably be in blue or green colour. items to be available in 4 kgs (03 nos) and 5 kgs weights (02 nos)., technical specifications to include only 02 x quantity of rope with length 50 ft (15 m) per rope with diameter of 1.5 inch (38 mm). its material to be 100% poly dacron or nylon with protective sleeve. its weight to be approx 15 - 17 kgs of 02 ropes. rubber grip handles with end caps to prevent fraying. wall/ground anchor kit with d-ring and carabineers per rope. protective sleeve for middle 10 ft to prevent floor abrasion., technical specifications to include heavy duty mild steel rectangular frame with frame thickness 2.5 to 3.5 mm and powder coated corrosion resistant, max user weight for be 150-200 kgs with dimensions as 200-250cm (l), 180-220 cm (w), 210- 230 cm (h) and net weight of equipment to be 300- 500 kgs, 8.3. technical specifications to include heavy duty mild steel with thickness 2.5-3 mm, powder coated corrosion resistant, maximum user weight of 120- 150 kgs, net weight of machine to be 15 - 30 kgs, machine dimension to be 130-160 cm (l), 40-60 cm (w), 50-90 cm (h)., technical features to include its material made from high grade pvc, it should ensures durability, non-toxic, suitable for indoor use, elasticity and resistance to wear and tear., technical specifications to include, compatible 7 ft straight rod, 4 ft rods and curl bars, material to be made from heavy duty steel frame with powder coated corrosion resistance, anti-skid rubber feet, multi angle adjustable backrests, max user weight to be 150-200 kgs, net weight of machine to be 30-40 kgs with machine dimensions as 4.5 - 5.5 ft (l), 1.5- 2 ft (w)., technical specifications to include commercial grade machine with digital platform weighing scale with capacity of 200 kg and accuracy of 100gram division, error max + 100g. platform size of 300mm x 300 mm x 40mm, platform material of ms powder coated or ss top plate. display of inch bright led, red or green digits. power rechargeable- 6v battery + 230v ac adapter, battery backup of 40-60 hours on full charge, body of mild steel, powder coated to avoid rust. weight of machine to be max 4-5 kgs. machine should be isi mark or commercial certification to ensure accuracy for medical use., technical specifications to include non-slippery and impact absorbing surface made up of pvc or eva foam, non-toxic, anti-slip and skin safe material, standard size of 5.7 - 6 ft (l) or (173-183 cm) (l), 60 - 65 cm (w), thickness to be 4-6 mm, weight to be 0.8-1.5 kg per mat., 13.3. tech specifications to include 8 level manual magnetic resistance, flywheel weight of 7 kg to 13 kg for smooth pedalling, max user weight of 150 kg, adjustable seats (up/down + front/back), cushioned handle bar, sensors display showing time, speed, distance, calories, pulse, anti-slip paddles with adjustable straps. heavy duty steel frame with powder coating. dimensions to be approx 100 cm l x 50 cm w x 125 cm h and net weight to be max 30 - 40 kg., key features and technical specifications to include comfortable padding with thick foam on dip handles, help range of 10 - 80 kg, size of machine to be 6.5 ft tall and 4 ft wide, dip bar spacing to be at least 20 - 22 inch apart, machine to be built with heavy duty steel frame with powder coating and rubber feet to avoid slip, machine weight to be max 150 kg. user weight limit up to 150 kg,
Agency / Dept :
indian army
Due Date :
Oct 31, 2026 (16 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17736300
Location : bina , madhya pradesh
Source : GEM Tenders
LIVE TENDER
corrigendum tender for compound rust remover wd40 400 ml pack , switch,network,layer 2,pngs748t300 , media cnvtr,single mode,5v,1a , module,gbic,fibre,mmagm732f , fans,axial,115vac,mmsp101a , fans,axial,dp201a ,pn2123hst.gn , panel exchust fan,171x151x51mm,220240v , pannel exchust fan,171x151x51mm,115vac , mouse optical , keyboard usb fdesktop laptop , electronic contact cleaner oks2621 , tubular lugs with insulator1 sq. mm , tubular lugs with insulator6 sq mm , tubular lugs with insulator0.75 sq. mm , tubular lugs with insulator1.5 sq. mm , tubular lugs with insulator2.5 sq. mm , utype lugs with insulator1.5 sq. mm , utype lugs with insulator2.5 sq. mm , utype lugs with insulator1 sq. mm , female terminal lug,insulator1.5 sq. mm , ring type lugs with insulator1 sq. mm , ring type lugs with insulator1.5 sq. mm , ring type lugs with insulator2.5 sq. mm , ring type lugs with insulator6 sq mm , screw power tb 2.5 sq. mm , 2.5sqmm screw tb end plate , screw power tb 4 sq. mm , 4sqmm screw tb end plate , screw power tb 6 sq. mm , 6sqmm screw tb end plate , screw power tb 10 sq. mm , 10sqmm screw tb end plate , screw power tb 25 sq. mm , tb end stopper , cable black single core cu1 sq. mm , cable red single core cu1 sq. mm , cable yellow single core cu1 sq. mm , cable blue single core cu1 sq. mm , cable white single core cu1 sq. mm , nylon cable tie150mm , nylon cable tie100 mm , nylon cable tie300mm , ferrule sleeve white colour1.5 sq. mm , ferrule sleeve white colour2.5 sq. mm , aluminium din rail35 mm width , copper earthing busbar ,10mmx165mmx 3mm , tape ins ele adhesive pvc 19x0.125mmx10m , packing metal foil al 2inx20m 0.085mm , patch cord,fiber,sgl mode,dpx,scsc apc , patch cord,duplex,fiber,lcsc 1.6mm , mouse pad , connector rj45 , 1.5sqmm tb push fit with cage clamp sprt , 1.5sqmm tb knife edge push fit , terminal block,fuse,mmuk5 hesila 250 , terminal block,fuse,mmuk5 hesiled 24v , earthing cable 6mm2 , earthing cable 25mm2 , armoured cat 6 ethernet cable , armoured lcsc sm patchcord 50mts, procurement of electronic miscellaneous spares for instrumentation systems at bpcl bina refinery, refer rfq for detail description
Agency / Dept :
bharat petroleum corporation limited BPCL
Due Date :
Oct 19, 2026 (4 days left)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Nylon Sleeve. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Nylon Sleeve sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Nylon Sleeve Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Nylon Sleeve, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Nylon Sleeve Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Nylon Sleeve Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Nylon Sleeve.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Nylon Sleeve depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Nylon Sleeve Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Nylon Sleeve bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Nylon Sleeve. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Nylon Sleeve, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Nylon Sleeve, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Nylon Sleeve?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Nylon Sleeve tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Nylon Sleeve?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Nylon Sleeve, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Nylon Sleeve is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All