sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

27Latest Fibre component Tenders List

Latest Fibre component Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Fibre component tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Fibre component tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Fibre component Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Fibre component tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Fibre component Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Fibre component Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Fibre component Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Fibre component tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Fibre component Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Fibre component sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Fibre component tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Fibre component tenders.

Is EMD mandatory for all Fibre component tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Fibre component work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Fibre component tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Fibre component Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16924699
Location : jalandhar , punjab
LIVE TENDER
auction or scrap of lot no - lot name - mild steel scrap (unsv) product type - metal category - iron and steel mild steel scrap (unsv) material no: 10558470 appx wt in kgs: 5000 remarks: total weight not to exceed 5000 kgs | lot no - lot name - rubber scrap (unsv) product type - miscellaneous category - rubber rubber scrap (unsv) material no: 10557979 appx wt in kgs: 5000 remarks: total weight not to exceed 5000 kgs | lot no - lot name - woolen rags (unsv) product type - miscellaneous category - textile woolen rags (unsv) material no: 10557987 appx wt in kgs: 2000 remarks: total weight not to exceed 5000 kgs | lot no - lot name - sort mt component (unsv) product type - metal category - iron and steel sort mt component (unsv) material no: 10557701 appx wt in kgs: 5000 remarks: total weight not to exceed 5000 kgs | lot no - lot name - tarpaulin scrap (unsv) product type - miscellaneous category - textile tarpaulin scrap (unsv) material no: 10558010 appx wt in kgs: 5000 remarks: total weight not to exceed 5000 kgs | lot no - lot name - s & w scrap (unsv) product type - electrical items category - others - s & w scrap (unsv) pcb group - e- waste-rule 2022 s & w scrap (unsv) material no: 10558475 appx wt in kgs: 5000 remarks: total weight not to exceed 5000 kgs | lot no - lot name - plastic scrap (unsv) product type - miscellaneous category - plastic plastic scrap (unsv) material no: 10557980 appx wt in kgs: 2000 remarks: total weight not to exceed 5000 kgs | lot no - lot name - cotton rags (unsv) product type - miscellaneous category - textile cotton rags (unsv) material no: 10557981 appx wt in kgs: 2500 remarks: total weight not to exceed 5000 kgs | lot no - lot name - tect misc (unsv) product type - miscellaneous category - textile tect misc (unsv) material no: 10570812 appx wt in kgs: 5000 remarks: total weight not to exceed 5000 kgs | lot no - lot name - sort tentage old (unsv) product type - miscellaneous category - textile sort tentage old (unsv) material no: 10557707 appx wt in kgs: 5000 remarks: total weight not to exceed 5000 kgs | lot no - lot name - sort boot (unsv) product type - miscellaneous category - footwear sort boot (unsv) material no: 10557675 appx wt in kgs: 5000 remarks: total weight not to exceed 5000 kgs | lot no - lot name - wooden scrap (unsv) product type - miscellaneous category - wooden items wooden scrap (unsv) material no: 10557982 appx wt in kgs: 5000 remarks: total weight not to exceed 5000 kgs | lot no - lot name - sort helmet fibre/steel (unsv) product type - miscellaneous category - plastic sort helmet fibre/steel (unsv) material no: 10557844 qty: 2000 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort tyre mt 1200 x 20 (unsv) product type - miscellaneous category - rubber sort tyre mt 1200 x 20 (unsv) material no: 10557749 qty: 50 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort tyre mt 355/90x20 (unsv) product type - miscellaneous category - rubber sort tyre mt 355/90x20 (unsv) material no: 10586340 qty: 50 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort tyre mt 78 x 15 (unsv) product type - miscellaneous category - rubber sort tyre mt 78 x 15 (unsv) material no: 10557752 qty: 100 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort mattress (unsv) product type - miscellaneous category - textile sort mattress (unsv) material no: 10557769 qty: 150 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort biycle tp (unsv) product type - metal category - iron and steel sort biycle tp (unsv) material no: 10557755 qty: 100 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort tyre mt 1100 x 20 (unsv) product type - miscellaneous category - rubber sort tyre mt 1100 x 20 (unsv) material no: 10557745 qty: 50 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort tyre mt 1500 x 21 (unsv) product type - miscellaneous category - rubber sort tyre mt 1500 x 21 (unsv) material no: 10557731 qty: 30 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort tyre mt 445/65 r 22.5 product type - miscellaneous category - rubber sort tyre mt 445/65 r 22.5 material no: 10574362 qty: 30 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort bty 12v 120ah (unsv) product type - electrical items category - battery pcb group - used batteries/lead acid batteries/lead acid cells & lead scrap sort bty 12v 120ah (unsv) material no: 10557735 qty: 200 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort bty 12v 75ah (unsv) product type - electrical items category - battery pcb group - used batteries/lead acid batteries/lead acid cells & lead scrap sort bty 12v 75ah (unsv) material no: 10557732 qty: 150 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort bty 12v 130ah (unsv) product type - electrical items category - battery pcb group - used batteries/lead acid batteries/lead acid cells & lead scrap sort bty 12v 130ah (unsv) material no: 10573120 qty: 150 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort bty mt 12v 180ah (unsv) product type - electrical items category - battery pcb group - used batteries/lead acid batteries/lead acid cells & lead scrap sort bty mt 12v 180ah (unsv) material no: 10573118 qty: 150 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort gen set 2.5 kva (unsv) product type - electrical items category - dg sets/generators sort gen set 2.5 kva (unsv) material no: 10557836 qty: 2 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort eng assy (unsv) product type - plant/machineries category - engine assemblies/ vehicle comp. sort eng assy (unsv) material no: 10557777 qty: 1 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort eng assy (unsv) product type - plant/machineries category - engine assemblies/ vehicle comp. sort eng assy (unsv) material no: 10557777 qty: 2 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort eng assy (unsv) product type - plant/machineries category - engine assemblies/ vehicle comp. sort eng assy (unsv) material no: 10557777 qty: 3 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort fire ext (unsv) product type - metal category - iron and steel sort fire ext (unsv) material no: 10557791 qty: 50 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort fire ext s/acid 9 ltr (unsv) product type - metal category - iron and steel sort fire ext s/acid 9 ltr (unsv) material no: 10553486 qty: 300 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort gen set (unsv) product type - electrical items category - dg sets/generators sort gen set (unsv) material no: 10557894 qty: 1 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort gen set 7.5 kva (unsv) product type - electrical items category - dg sets/generators sort gen set 7.5 kva (unsv) material no: 10574353 qty: 1 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort track links scrap (unsv) product type - plant/machineries category - engine assemblies/ vehicle comp. sort track links scrap (unsv) material no: 10628007 appx wt in kgs: 2500 remarks: total weight not to exceed 2500 kgs (the successful bidder will lift the lots after cutting the bogie wheels in depot premises under own arrangements). | lot no - lot name - sort gear box assy (unsv) product type - plant/machineries category - engine assemblies/ vehicle comp. sort gear box assy (unsv) material no: 10557779 qty: 2 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only.
Agency / Dept :
mstc limited metal scrap trade corporation limited
Due Date :
Aug 29, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16924707
Location : jalandhar , punjab
LIVE TENDER
auction or scrap of lot no - lot name - sort helmet fibre/ steel (unsv) product type - miscellaneous category - plastic sort helmet fibre/ steel (unsv) material no: 10557844 qty: 2000 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort bty mt 12v 75 ah (unsv) product type - electrical items category - battery pcb group - used batteries/lead acid batteries/lead acid cells & lead scrap sort bty mt 12v 75 ah (unsv) material no: 10557732 qty: 150 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort eng assy o/s (unsv) product type - plant/machineries category - engine assemblies/ vehicle comp. sort eng assy o/s (unsv) material no: 10557777 qty: 1 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort net mosquito (unsv) product type - miscellaneous category - textile sort net mosquito (unsv) material no: 10557765 qty: 2000 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort blanket o/s (unsv) product type - miscellaneous category - textile sort blanket o/s (unsv) material no: 10557756 qty: 2000 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort tyre mt 78 x 15 (unsv) product type - miscellaneous category - rubber sort tyre mt 78 x 15 (unsv) material no: 10557752 qty: 150 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort tyre mt 355/90 x 20 (unsv) product type - miscellaneous category - rubber sort tyre mt 355/90 x 20 (unsv) material no: 10586340 qty: 50 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort tyre mt 1200 x 20 (unsv) product type - miscellaneous category - rubber sort tyre mt 1200 x 20 (unsv) material no: 10557749 qty: 50 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort fire ext (unsv) product type - metal category - iron and steel sort fire ext (unsv) material no: 10557791 qty: 500 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort fire ext (unsv) product type - metal category - iron and steel sort fire ext (unsv) material no: 10557791 qty: 100 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - mild steel scrap (unsv) product type - metal category - iron and steel mild steel scrap (unsv) material no: 10558470 appx wt in kgs: 5000 remarks: total weight not to exceed 5000 kgs | lot no - lot name - rubber scrap (unsv) product type - miscellaneous category - rubber rubber scrap (unsv) material no: 10557979 appx wt in kgs: 5000 remarks: total weight not to exceed 5000 kgs | lot no - lot name - woolen rags (unsv) product type - miscellaneous category - textile woolen rags (unsv) material no: 10557987 appx wt in kgs: 5000 remarks: total weight not to exceed 5000 kgs | lot no - lot name - sort mt components (unsv) product type - metal category - iron and steel sort mt components (unsv) material no: 10557701 appx wt in kgs: 5000 remarks: total weight not to exceed 5000 kgs | lot no - lot name - sort tentage old (unsv) product type - miscellaneous category - textile sort tentage old (unsv) material no: 10557707 appx wt in kgs: 5000 remarks: total weight not to exceed 5000 kgs | lot no - lot name - tarpauline scrap (unsv) product type - miscellaneous category - textile tarpauline scrap (unsv) material no: 10558010 appx wt in kgs: 5000 remarks: total weight not to exceed 5000 kgs | lot no - lot name - plastic scrap (unsv) product type - miscellaneous category - plastic plastic scrap (unsv) material no: 10557980 appx wt in kgs: 3000 remarks: total weight not to exceed 3000 kgs | lot no - lot name - cotton rags (unsv) product type - miscellaneous category - textile cotton rags (unsv) material no: 10557981 appx wt in kgs: 2500 remarks: total weight not to exceed 2500 kgs | lot no - lot name - sort boggie wheel o/s (unsv) product type - plant/machineries category - engine assemblies/ vehicle comp. sort boggie wheel o/s (unsv) material no: 10557799 qty: 50 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. (the successful bidder will lift the lots after cutting the bogie wheels in depot premises under own arrangements). | lot no - lot name - sort boot (unsv) product type - miscellaneous category - footwear sort boot (unsv) material no: 10557675 appx wt in kgs: 5000 remarks: total weight not to exceed 5000 kgs | lot no - lot name - c & a steel scrap (unsv) product type - metal category - iron and steel c & a steel scrap (unsv) material no: 10557993 appx wt in kgs: 2000 remarks: total weight not to exceed 2000 kgs | lot no - lot name - sort tyre mt 235/70 (unsv) product type - miscellaneous category - rubber sort tyre mt 235/70 (unsv) material no: 10586339 qty: 150 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort tyre mt 355/90x20 (unsv) product type - miscellaneous category - rubber sort tyre mt 355/90x20 (unsv) material no: 10586340 qty: 50 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only. | lot no - lot name - sort fire ext (unsv) product type - metal category - iron and steel sort fire ext (unsv) material no: 10557791 qty: 50 nos remarks: lot lifting will be conducted on the basis of qty i.e nos only.
Agency / Dept :
mstc limited metal scrap trade corporation limited
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16919802
Location : hassan , karnataka
Source : GEM Tenders
LIVE TENDER
tender for river sand , surkhi , lime , brick bats of 20 mm , jaggery , antuwalakai , kadukkai , grinding machine hiring including fuel charges , grinding machine , lime mixing machine , size stone , special size bricks , rubbles stone , modular common brunt clay bricks , cement mortar , trowel sharp edge - blades , trowel curve edge , wooden float , plastic buckets 25 liters , aluminium screed 2inchx1inchx5feet , aluminium screed 2inchx1inchx3feet , curing pipe one inch 100 meter , saw blade , rubber hand gloves set , cloth hand gloves set , gumboots , safety helmet , safety goggles , shovel , pvc round pan , sieving mesh , plastic water storage pot , water storage plastic drums , pvc water drum 2000 liters capacity , 2 hp motor , tarpaulin sheet , disposable face mask , safety belt , hammer 2kgs head with handle , chisel , sharping charges of chisel , gunny bags , aluminium wire 90m coil , switch box 4 module, switch and socket , bulb led 18w , pointing trowel , wire brush , coir brush , transportation of materials , 50mm dia and 5mm thick hollow ms pipe , 2 nos ms steel 15mm thick inter lock chainage , synthetic enamel paint , carriage of rubbish item, supply of good quality river sand (coarse and fine) required for lime works shall consist of natural sand, shall be hard, durable, clean and free from adherent coatings and organic matter, shall not contain the amount of clay not more than 5percentage by mass, free from silt, shall not contain any harmful impurities such as iron pyrites, alkalis, salts, coal or other organic impurities to affect adversely the hardening, strength or durability of the mortar, supply of good quality 1st class surkhi used as fine aggregate in lime mortar. surkhi, powdered broken brick, prepared by pozzolanic material well burnt good quality bricks and clay balls, finely grinded, powdered, free from under burnt particles of soluble salts, more resistant to alkalis and salt solutions, pyrites and adherent coatings of soil or silt, used for making waterproofing, lime mortars and, lime concrete, including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications .( test reports as per is standard from recognised govt agency and the material sample approval should be taken from the office before supplying), supply of good quality un slaked lime directly from quarry not more than 15 days required for preparation of lime putty in traditional method on the process of slaking, from non-hydraulic lime silica and alumina in quantities of less than 15percentage in lime will be accepted, used for masonry mortars, lime concrete and plaster undercoat, minimum 1.25n mm square compressive strength for 7days, etc., including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications, supply of good quality 20 mm brick bats obtained by crushing well-burnt clay bricks of class designation 7.5, hard, sound, and free from under-burnt particles, soluble salts, pyrites, dust, soil, and other deleterious matter, graded to pass through a 20 mm sieve and retained on a 10 mm sieve, suitable for use as coarse aggregate in lime mortar and lime concrete, including loading, transportation, unloading, stacking, all labour, and incidental charges complete as directed by the engineer-in-charge and as per specifications, supply of good quality jaggery, ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the work in charge, supply of good quality antuwalakai (soap nut and feronia additive as locally approved), clean, dry and free from impurities, suitable for preparation of traditional lime mortar to improve workability, durability and bonding properties in conservation works, as directed by the engineer-in-charge, supply of good quality kadukkai - mature, clean and free from foreign matter, suitable for use as a traditional additive in lime mortar for improving strength, durability and water resistance in conservation works, as approved by the engineer-in-charge, grinding machine hiring including fuel charges providing and hiring heavy-duty grinding machine in good working condition, complete with all accessories, suitable for grinding lime, surkhi and other approved materials required for conservation works, including fuel and operational requirements, providing and hiring portable grinding machine in good working condition, complete with necessary accessories, suitable for grinding small quantities of lime mortar ingredients and other approved materials for conservation works, including fuel and operational requirements., lime mixing machine hiring including fuel charges providing and hiring lime mixing machine of adequate capacity, diesel or electrically operated, in good working condition, suitable for uniform mixing of lime mortar for conservation works, complete with all necessary accessories including fuel wherever applicable, size stone 300mm x 300mm x 250mm, bond stone 350mm x 500mm x 250mm size supply of hard, sound and durable natural size stones and bond stones, obtained from approved quarries, free from cracks, weathered portions, laminations and other defects, accurately dressed to the specified dimensions with true beds and joints. the stones shall conform to the provisions of is 1597.size stones shall be used for wall face masonry and structural hearting, while the bond stones shall be provided as tie stones for effective transverse bonding, interlocking and strengthening of masonry in conservation works and the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, special size bricks 220mmx120mmx40mm- should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952 the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, rubbles stone for backfilling 15cm x 22.5cm- supply of hard, sound and durable natural rubble stones of minimum size 150 mm x 225 mm, obtained from approved quarries, free from cracks, weathered portions and other defects, hammer dressed in accordance with is 1129 and conforming to is 1597 (part 1). the stones shall have a minimum thickness of 225 mm, be laid with the broadest face on the prepared bed to achieve proper interlocking, with joints tightly packed using stone spalls. the finished pitching shall be suitable for dry or grouted stone pitching in conservation works and slope protection, the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, modular common brunt clay bricks of class designation 7.5 - should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952, cement mortar 1 into 4 where 1 part cement to 4 parts sand-ratio in which specify clean dry sand mention water as needed for workability also note its uses for example bricklaying blockwork and tile bedding and including material quality where opc cement type and standards like is codes in india ensuring consistency with measured proportions for strength., trowel sharp edge blades hardened and tempered highcarbon steei for durabitity staintess steei for rust resistance. handles smooth and seasoned hardwood or pvc. should be in accordance with lndian standards ls 1630 1984., trowel curve edge - blades hardened, tempered high-carbon steel for durability stainless steel for rust resistance. handles smooth, seasoned hardwood or pvc. should be in accordance with indian standards is 1630 (1984)., supply of wooden float of size 300 mm x 150 mm, manufactured from seasoned hardwood such as teak, pine, sheesham or equivalent, having a 10 to 15 mm thick smooth, flat base with slightly bevelled edges and fitted with an ergonomically designed top mounted wooden or high impact composite handle securely fixed with screws or resin bonding. the float shall be lightweight, durable and moisture-resistant, suitable for levelling, compacting and finishing lime mortar, plaster and concrete surfaces in conservation works, complete as approved by the engineer in charge, plastic buckets 25 liters - high-durability specifications to withstand rough handling, heavy loads, and exposure to construction materials like lime, mortar, and sand. made from high-density polyethylene (hdpe) or polypropylene (pp), offering impact resistance, chemical resistance, and uv protection for outdoor use. (the material sample approval should be taken from the office before supplying), aluminium screed 2inchx1inchx5feet supply of aluminium screed of size 2 inch x 1 inch x 5 feet, manufactured from high-strength extruded aluminium section, straight, lightweight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime concrete and plaster surfaces in conservation works, complete as directed by the engineer-in-charge, aluminium screed 2inchx1inchx3feet supply of aluminium screed of size 2 inch x 1 inch x 3 feet, manufactured from high-strength extruded aluminium section, lightweight, straight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime mortar and plaster surfaces in conservation works, complete as approved by the engineer-in-charge., curing pipe one inch 100 meter -supply of flexible pvc hose pipe of 25 mm (1 inch) diameter and 100 metres length, manufactured from premium quality pvc, weather-resistant, leak-proof and capable of withstanding normal working pressure, suitable for curing masonry, plaster and concrete works, complete with standard fittings wherever required, supply of industrial quality circular saw blade of 10inch diameter with 30 mm bore, manufactured from high-grade hardened and tempered alloy steel with 40 precision-ground teeth, heavy duty steel plate and optimized kerf width, provided with thermal expansion slots and friction-reducing coating for smooth, stable and reliable cutting with extended service life. the blade shall be easy to installation , suitable for cutting wood, plastics and non-ferrous metals, and compatible with professional cutting machines, complete as approved by the engineer in charge., rubber hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., cloth hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., gumboots should meet requirements such as water impermeability puncture resistance and slip resistant soles safety or protective footwear en iso 20345. it has a minimum impact resistance of 200 joules and compressive strength of at least 15 kn at the toe cap. the material sample approval should be taken from the office before supplying., safety helmet strong, rigid materials like high density polyethylene hdpe, abs, or polypropylene pp, dome shaped, without metallic parts, uv resistant. harness system suspension, impact absorption, penetration resistance, electrical insulation class g general, temperature resistance, standards and certifications is 2925the material sample approval should be taken from the office before supplying., safety goggles- should be impact-resistant polycarbonate lenses, uv protection, anti-fog scratch coatings, and a wraparound side-shield design for full coverage, fitting snugly and comfortably with ventilation, often meeting standards like ansi z87.1, ensuring protection from debris, dust, and radiation for construction environments. (the material sample approval should be taken from the office before supplying), supply of industrial quality multi purpose folding shovel manufactured from high strength metal, rugged, lightweight and corrosion-resistant, suitable for digging, chopping, scooping, hammering and scraping applications. the shovel shall be foldable for easy storage and portability, with an overall shovel length of approximately 23.25 inches 59 cm, saw length with handle of approximately 12.5 inches, integrated saw blade length of approximately 5.5 inches 14 cm, maximum weight of 525 g, and conforming to uiaa safety certification or equivalent, complete as approved by the engineer in charge, pvc round pan ghamela in which high grade virgin polyvinyl chloride or heavy duty polypropylene for high strength and flexibility. smooth interior surface crack and impact resistant, weather resistant for both indoor and outdoor use in which generally 5mm to 10mm thickness and shape is round open to top bowl and standard construction sizes usually 15 to 8 inches diameter and 10 kg to 20 kg load capacity. roughly 8 to 12 inches height. the material sample approval should be taken from the office before supplying., sieving mesh with wooden side frame with stand mechanism of size 2 feet x 5feet fabricated with ss304 ss316 stainless steel wire mesh of approved aperture and gauge securely fixed to a rigid hardwood frame teak neem or treated pine resistant to moisture decay and heavy usage. the unit shall be mounted on a sturdy wooden stand mechanism for convenient operation ensuring stability during sieving of sand surkhi lime and other construction materials used in conservation works. the mesh shall be corrosion resistant durable and free from defects complete as approved by the engineer in charge., plastic water storage pot supply of portable water storage pot manufactured from food-grade virgin high density polyethylene hdpe, polypropylene pp or pet plastic, free from bpa and harmful chemicals, suitable for safe storage of drinking and construction water. the pot shall be durable, leak-proof, uv resistant and provided with a tight fitting screw lid and leak proof plastic tap or dispensing arrangement, with integrated top handle or side grips for easy handling and transportation, complete as approved by the engineer in charge, water storage plastic drums 200l to 200 liters capacity, made of hdpe plastic, corrosion resistance, uv stability, and lightweight 8to10 kg empty removable lid with a metal or plastic locking ring clamp for easy filling, cleaning, and access. the material sample approval should be taken from the office before supplying, pvc water drum 2000 liters capacity of 2000 liter pvc water drum or tank typically feature like durable uv stabilized plastic cylindrical shapes varying thickness for strength and offering strong corrosion resistant storage for drinking industrial or agricultural water needs with options for multiple layers and specific fittings., supply of 2 hp single phase electric motor operating on 220to 240 v ac, 50 and 60 hz power supply, delivering 1.5 kw output with a rated speed of 1440 rpm 4pole or 2800 rpm 2pole and full-load current of 9.2 to 12 a. the motor shall be manufactured with 100 percentage copper windings, enclosed in a totally enclosed fan cooled tefc casing with ip55 protection against dust and water ingress, suitable for continuous operation in construction and conservation works, complete as approved by the engineer in charge., tarpaulin sheet 30 feet x 40 feet high-density polyethylene (hdpe) or multi-layered cross laminated (mlcl) materials, often with 120 gsm to 250 gsm (grams per square meter) thickness for durability, 100% waterproof and weatherproof and uv stabilized/protected (essential for long-term outdoor exposure)., disposable face mask supply of disposable 3ply non woven face mask comprising an outer hydrophobic spun bond non woven layer, a middle high density melt blown polypropylene filtration layer with bacterial filtration efficiency (bfe) of 95 to 99percentage, and an inner soft hydrophilic non woven layer for enhanced comfort. the mask shall be provided with high elastic soft ear loops and an integrated flexible plastic or aluminium nose clip to ensure a secure fit and minimize leakage, suitable for protection against dust and airborne particles during conservation and construction works, complete as approved by the engineer in charge., safety belt-- full-body harnesses (fbh) for fall arrest (dorsal d-ring), made from high-tenacity polyester and nylon webbing (min 44mm wide, 3mm thick) that withstands high tensile loads, featuring corrosion-resistant hardware, ergonomic padding, adjustable straps, and certifications like ce bis iso, ensuring comfort, proper fit, and critical fall-arrest force absorption for working at heights as per is 3521. (the material sample approval should be taken from the office before supplying), hammer 2kgs head with handle - head is hardened and tempered, typically ranging from hrc 48 to 58 for optimum toughness and to prevent shattering. square, double-faced, or hexagonal head with flat striking surfaces, handel made up of high-quality hardwood. two-colour carbon fiberglass shaft designed to absorb shock and reduce hand fatigue., chisel made up of high grade alloy steel, chrome vanadium crv steel or carbon steel for high durability. induction hardened tips around hrc 63 to 65. bevel edged, flat or pointed edge. the material sample approval should be taken from the office before supplying., sharping charges of chisel 5nos x 2times providing sharpening charges for 5 numbers of chisels, each sharpened twice, using mechanical grinding equipment to restore the cutting edge and maintain the required sharpness, profile and temper suitable for stone dressing, brick cutting and conservation works, complete as directed by the engineer-in-charge., gunny bags supply of good quality bt will woven jute gunny bags conforming to is 12650 into 2018 (standard btwill) or is 16186 2014 (lightweight sacking), having nominal dimensions of 94 cm x57 cm or 112 cm x 67.5 cm, fabricated from natural jute fibre with 3ply heracles stitched safety seams, durable and free from defects, suitable for storage and transportation of construction materials and for use in curing works during conservation works, complete as approved by the engineer in charge, aluminium wire 90m coil supply of pvc insulated aluminium wire in 90 metre coil of approved size 7 bar 20, manufactured with high-quality aluminium conductor and durable pvc insulation, providing safe, reliable and efficient current flow with good heat resistance. the wire shall be lightweight, flexible and easy to installation , suitable for domestic, commercial and light electrical wiring applications, complete as approved by the engineer-in-charge, switch box 4 module, switch and socket supply of 4 module modular switch box manufactured from fr grade polycarbonate for surface mounting or galvanized iron gi sheet for flush mounting, measuring approximately 135 mm x 75 mm to 150 mm x 90 mm, suitable for accommodating up to 4 modular units comprising switches and sockets. the switches shall have a current rating of 6a bar 10a or 16a 20a 25a as required, with a voltage rating of 240to 250v ac, 50 hz, and the socket shall be 6a or 16a shuttered type with child safety mechanism. the switch box shall be durable, corrosion resistant and suitable for indoor electrical installations, complete as approved by the engineer in charge., bulb led 18w supply of 18 w led bulb suitable for operation on 220 to 240 v ac, 50 hz power supply, having a minimum luminous flux of 1620 to 1908 lumens with an efficacy of 90 to 106 lumens and w. the bulb shall have a power factor of not less than 0.90, colour rendering index cri of 80 ra, surge protection of 2.5 to 4 kv, and an average service life of up to 25,000 hours, suitable for energy efficient indoor illumination, complete as approved by the engineer in charge., pointing trowel supply of professional quality pointing trowel with 150 mm 6 inch long and 75to80 mm wide blade, manufactured from high carbon steel or hardened mild steel with rust-resistant coating and blade thickness of approximately 1.0to1.2 mm. the trowel shall be fitted with a pvc or thermoplastic rubber tpr soft-grip handle of approximately 120to125 mm length, securely attached with a welded or riveted tang, lightweight and durable, suitable for accurate pointing, joint finishing and application of lime mortar in conservation works, complete as approved by the engineer in charge., wire brush supply of heavy-duty wire brush having an overall length of approximately 250 to 300 mm, provided with 3 or 4 rows of hardened carbon steel or iron wire bristles, securely stapled or embedded in a durable hardwood or moulded pvc handle. the brush shall be sturdy, corrosion resistant and suitable for manual cleaning of stone and brick masonry surfaces, removal of loose mortar, dirt, biological growth, rust stains and other surface deposits during conservation works, complete as approved by the engineer in charge., coir brush supply of 10 inch coir fibre handle brush fitted with 100 percentage naturally processed unbleached brown coir fibre bristles of 63 to 76 mm length, densely packed for effective scrubbing, securely fixed to a seasoned hardwood or country wood ergonomic handle. the brush shall be resistant to water, diluted acids and lime wash, biodegradable and free from plastic components, suitable for cleaning stone and brick masonry surfaces, removal of loose dust, lime deposits and surface contaminants during conservation and restoration works, complete as approved by the engineer in charge., transportation of materials providing transportation of approved construction materials from the source of supply to the work site by suitable vehicles, including safe loading, unloading, handling and stacking, ensuring the materials are protected from damage, contamination and moisture during transit, complete as directed by the engineer-in-charge., 50mm dia and 5mm thick hollow ms pipe supply of 50 mm diameter and 5 mm thick mild steel (ms) hollow pipe conforming to is 1161 or is 4923, manufactured from low carbon steel by the electric resistance welded (erw) process or seamless construction, having a minimum yield strength of 240 mpa and tensile strength of 410 mpa. the pipe shall be supplied in standard lengths, true to size, straight, free from dents, cracks and surface defects, with black or hot-dip galvanized finish as specified, suitable for fabrication of grills, railings, fencing, supports and other structural components in conservation works, complete as approved by the engineer-in-charge, 2 nos ms steel 15mm thick inter lock chainage supply of 2 numbers of mild steel ms interlocking chainage plates, manufactured from 15 mm thick ms plates conforming to is 2062 grade e250 a andb, precision cut by laser or cnc process and provided with accurately machined interlocking arrangement for secure and slip free coupling. the plates shall have a minimum yield strength of 250 mpa and tensile strength of 410 to 540 mpa, with high visibility engraved or punched chainage markings as per approved drawings, suitable for alignment, chainage marking and structural applications in conservation works, complete as approved by the engineer in charge, supply of synthetic enamel paint based on modified alkyd resin, having a high gloss finish minimum 85 percentage at 60 degree angle, with 40to 45percentage volume solids and suitable viscosity for brush, roller or spray application. the paint shall provide a dry film thickness of 20 to 35 microns per coat with a theoretical coverage of 10 to 15 m square per litre per coat, and shall be compatible with approved enamel thinners. it shall possess good adhesion, flexibility, resistance to moisture, water, oils, mild industrial fumes and intermittent salt spray and suitable in conservation works, complete as approved by the engineer in charge, carriage of rubbish item providing carriage of rubbish, debris, dismantled materials and other unserviceable waste generated during conservation works from the work site to an approved disposal location by suitable means of transport, including safe loading, unloading and disposal in accordance with local regulations, ensuring the monument premises are kept clean and free from obstructions, complete as directed by the engineer-in-charge.
Agency / Dept :
archaeological survey of india ASI
Due Date :
Sep 11, 2026 (11 days left)
Tender Value :
34.41L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16742597
Location : chinsurah magra , west bengal
Source : GEM Tenders
LIVE TENDER
tender for all geared , starter motor axial type pre engagement type and construction of axial type , storage type water cooler hot and cold , telescopic alidade , three four door refrigerator inverter type , thyristor igbt controlled vvvf ac motor drive with control panel , tinnmans shear , total station , transit theodolite with stand with all accessories , turbocharger cut sectional view , ultrasonic injection cleaning equipment , universal tool and cutter grinder , vrf vrv ac unit , water cooled induction welding brazing machine. , water cooler storage type , water dispenser bubble type hot and cold , water pump for dismantling and assembling , wireless communication modules for interfacing with microcontrollers rfid card reader finger print zigbee gps gsm bluetooth wifi , working condition of diesel engine crdi 4 stroke engine assembly with fault simulation board , working condition of ev electric vehicle car , apparatus for measurement of thermal conductivity of good and bad conductors , air blow gun with standard accessories , air ratchet with standard accessories , analog component trainer , angle truing attachment for surface grinding machine , apparatus for measurement of coefficient of expansion thermal of solid and liquid , apparatus for measurement of construction of efficient of expansionthermal of solid pulinger s apparatus , automatic reverse forward starter , autotransformer , belt tensioner gauge , bench lever shears , bench vice , binocular , boiling point and melting point apnaratus , bourdon tube c type pressure gauge , box sextant , cable straight jointing kit , calculator scientific non programmable , capsule type pressure gauge , cell phone power source with charger chords for different cell phones , chromatographic equipment , compression testing gauge suitable for diesel engine with standard accessories , computing scales five hectares , computing scales two hectares , condenser for distillation lebig , cork press , dc regulated variable programmable dc power supply , digital viscometer , digital and analog bread board trainer , digital balance 200 gm , digital balance 10 kg , digital ic tester , digital ic trainer , digital micrometer outside , dimmer starter , discrete component trainer basic electronics trainer , dmx controller , dual dc regulated power supply , dusk and dawn switch , electro magnetic relay with control panel a cut out relays b over current c under voltage , engineers stethoscope , ev charger home 1 phase input , ev charge, 3 phase input , fibre glass tape , fuel injection pump dismantling tool kit universal vice , fuel injection pump ve pump distributor fuel rotary pump dpc pumps along with special tools and accessories , growler armature , gunter s chain , hand reamers adjustable , height indicators , hollow punch set of seven pieces , hydraulic crimping tool for ug cable crimping with bits , hydraulic jack hi lift type 3 ton capacity and 5 ton capacity , impulse relay , indexing head with motorized for tool and cutter grinding machine , injector cleaning unit , injector testing set hand tester , insulators including hardware fitting , inverter with battery , land measuring chain , lcd based dpm , lcr meter digital handheld , leveling staff , levelling staff , liquid penetrate inspection kit , machine vice , magnet bar for magnetizing through compass needles , magnetic flux meter , metal cross staff box type , mppt based charge controller , multi scan tool with oscilloscope , multiangle magnetic clamp set , offset rod , oil pump for dismantling and assembling , pen knife , ph meter digital ,, workshop outfit, as per specification
Agency / Dept :
department of industrial training
Due Date :
Sep 08, 2026 (8 days left)
Tender Value :
2.42Cr
View Documents
T18 Ref No : 16800357
Location : thoothukudi , tamil nadu
LIVE TENDER
auction of machinary, plant and machinery: (1) coir spinning machinery unit (10 numbers) supplied by mis 2m engineers vide its quotation dalled 14.12.2019 (2) wooden bebbin unit (50 numbers) supplied by m's 2m engineers vide its quotation dated 14.12.2019, (3) spooling machine(6 head), auto tightner system for coir spinning machine, bobbin for coir spinning machines supplied by m/s 2m engineers vide its quotation dated 04.12.2020, (4) coconut fibre/husk auto feeder machine (2 numbers) length 20 feet width 5 feet with electric motor 2hp+3hp (g.ec make) supplied by mis siva sankari engineering & industriais vide its quotation dated 23.05.2019, (5) 35 kg hydrolic type baling press and electronic panel board supplied by mis siva sankari engineering and industrials, (6) ac drive panel board including its components suitable for 5 hp motor supplied by m's ms electricals, (7) one pilless type electronic weighing bridge 50 ton supplied by m's weightek india as per its quotation dated 05.06.2019, (8) factory unit constructed using brick and mortar along with 5ft side walls, fabricated truss works and other civil constructions done in the factory unit
Agency / Dept :
uco bank
Due Date :
Aug 29, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16701952
Location : indore , madhya pradesh
Source : GEM Tenders
tender for mark 4 10inch frame , motor bldc 900kv , propeller 1050 pair of 2 , zerodrag nova boost stack f4 fc icm42688p 55a 4 in 1 am32 esc , 6s2p li ion battery 9000mah , hglrc m100 pro gps , fpv camera cadex gazer , ubec 5v 3a , tx12 elrs remote with cell , usb video capture card , trigger switch , capacitor 1000uf 35v , f450 frame , ready to sky esc 40a , propeller bi blade 1050 pair of 2 , pixshawk 2.4.8 kit buzzer,anti vibration, gps with stand, power module , battery 4s2p 900mah , m8n gps , flysky fs i6s transmitter and receiver , holybro sik telemetry radio v3- 100 mw 433 mhz , lipo battery tester , battery charger , jst xh connector 1.225 8 pin , jst 6 pin female connector , soldering iron 60w kit , soldering wire , soldering flux , heat sink sleeves multiple sizes , zip tie 1 small and 1 large , safety switch , buzzer , power module , ofc for spool , fibre consistor for drone , fibre module, lightweight carbon fiber frame, 10-inch size, durable, suitable for long-range drones., brushless motor, 900kv rating, high efficiency, suitable for large propellers., 10x5 inch propellers, balanced, provides stable thrust and efficiency., flight controller (f4) with 55a 4-in-1 esc, fast processing, stable flight control., high-capacity battery, long flight time, 6-cell configuration., high-precision gps module, fast satellite lock, supports navigation and return-to-home., high-quality fpv camera, low latency, clear video transmission., voltage regulator, converts battery power to stable 5v output., radio transmitter with elrs protocol, long-range control, rechargeable battery., converts video signal to usb, used for live display or recording., simple on/off switch for controlling circuits or payload activation., reduces voltage spikes, improves power stability, standard quadcopter frame, durable, easy to assemble., electronic speed controller, 40a capacity, controls motor speed., two-blade propellers, efficient and stable flight performance., advanced flight controller with gps, power module, anti-vibration mount., 4-cell battery, moderate capacity, reliable power supply., gps module with good accuracy, supports autonomous flight modes, rc control system, user-friendly, stable communication., long-range wireless data link, 433 mhz frequency, 100mw power, used for real-time telemetry., checks voltage and health of lipo batteries, supports multiple cell types., smart charger for lipo/li-ion batteries, supports balance charging and safety protection., compact connector, used for battery balance leads and signal connections., standard female connector, used for wiring and module connections., high-power soldering tool, suitable for electronic assembly and repair., tin-based wire, used for joining electronic components., improves solder flow, ensures strong and clean joints., insulating tubes, shrink with heat, used for wire protection., plastic fasteners, used for cable management and securing components., provides safe power control, prevents accidental activation., audio alert device, used for warnings and locating drone, regulates voltage and current, supplies power to flight controller, reduces voltage spikes, stabilizes power supply., high-quality fibre cable, used for signal/data transmission over long distances., fibre-based component, supports communication or tethered operations., optical communication module, enables high-speed data transfer
Agency / Dept :
indian army
Due Date :
Aug 28, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16250378
Location : tiswadi , goa
tender for supply of structured lan and fibre optic network infrastructure components and accessories
Agency / Dept :
goa university
Due Date :
Aug 04, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15702765
Location : bathinda , punjab
Source : GEM Tenders
tender for echs bid 06 ortho bipolarhead and shortneck45mm , bipolarhead and shortneck47mm , cemented modular bipolar hip prosthesis with colarless polished femoral stem and compatible bipolar head with highly cross linked polyethylene l , uncemented thr prosthesis,metal on xlpe, consisting of 1. uncemented fully porous coated acetabular cup ,option of cluster screw holes or no holes,2.highlycrosslinkedpolyethylene liner,option , uncementedthrprosthesis,metalon xlpe, set consisting of 1. uncementedacetabular cup, 2. highly cross linked polyethylene liner,option of neutral and elevated liner,, 3. uncemented , posterior stabilized fixed bearing modular knee replacement prosthesis, cemented consisting of 1. cobalt chromium ps femoral , posterior stabilized modular knee replacementprosthesis,cemented and high flexion consisting of 1. cobalt chromium high flex ps femoral componen. , monoblock radial head prosthesis with smooth stem with diameter 5.5 to 8.5 mm and radial head diameter from 19 to 25 dai. , dynamic compression plate ,dcp, large fragment 4.5 mm narrow titanium with cortical screw assorted size. , dynamic compression plate, low contact ,lc dcp, large fragment 3.5 mm titanium cortical screw assorted size. , dynamic compression plate ,dcp, small fragment 3.5 mm titanium with cortical screw assorted size. , mini fragment plate 2.7 mm with 6 screws ,titanium, assorted size , locking compression plate, combination hole small fragment 3.5 mm with 4 cortical and 4 locking screws ,titanium, assorted size. , locking compression plate, combination hole large fragment 4.5 mm with 6 cortical and 4 locking screws ,titanium, assorted size , locking compression plate, combination hole small fragment 3.5 mm with 4 cortical and 4 locking screws .,titanium, assorted size , trochanteric hook plate assorted size. , locking eight plate for hemiepiphysiodesis with compatible locking screws assorted size , clavicular hook plate lcp complete construct with 03 cortical screws and 02 locking screws, left or right side ,titanium, assorted size , clavicular anatomical plate 3.5 mm complete construct for left or right side with 6 cortical screws ,titanium, assorted size , distal end clavicular plate ,right or left,, low profile with 4 locking and 4 cortical screws complete construct ,titanium, assorted size. , proximal humerus anatomical locking plate complete construct with 6 locking and 4 cortical screws ,titanium, assorted size. , distal humerus extraarticular plate 3.5 mm ,left or right,, complete construct with 6 locking and 4 cortical screws ,titanium, assorted size. , distal humerus anatomical medial plate 3.5 mm ,left or right,, complete construct with 6 locking and 4 cortical screws ,titanium, assorted size , distal humerus anatomical posterolateral plate. 3.5 mm ,left or right, complete construct with 6 locking and 4 cortical screws ,titanium, assorted size , olecranon plate, anatomical 3.5 mm right or left complete construct with 6 locking and 4 cortical screws ,titanium, assorted size , distal radius volar locking plate complete construct with 6 locking and 3 cortical screws ,titanium, assorted size , distal radius locking plate, variable angle complete construct with 6 locking and 3 cortical screws ,titanium, assorted size , distal radius lcp t plate 3.5mm, complete construct with 3 locking and 3 cortical screws ,titanium, assorted size , proximal femoral anatomical locking plate ,right or left, complete construct with 06 cortical screws and 06 locking screws ,titanium, assorted size , distal femur lateral periarticular locking plate ,left or right, complete construct with 06 locking cancellous screws, 04 cortical screws and 04 locking screws ,titanium, assorted size , proximal tibial lateral periarticular locking plate system ,left or right, complete construct with 04 metaphyseal locking cancellous screws, 02 cortical screws, 03 locking screws. assorted size , proximal medial tibial locking plate system, ,left or right,, complete construct with 03 locking screws and 03 cortical screws ,titanium, assorted size , anterolatereal distal tibial periarticular plate system, ,left or right, complete construct with 06 locking and 03 cortical screws ,titanium, assorted size , distal tibial medial low profile periarticular plating system ,left or right, complete construct with 06 locking screws and 03 cortical screws ,titanium, assorted size , calcaneum anatomical plate system ,right or left, low profile, complete construct with with 6 locking screws ,titanium, assorted size , high tibial osteotomy fixed angle platingsystem with screws ,titanium, assorted size , cortex screw 2.7mm assorted size tt , 3.5mm cortex screw, self and tapping, assorted size tt , 3.5mm locking head screw, self and tapping, assorted size tt , 4.5mm cortex screw, self and tapping, assorted size tt , 5.0mm locking head screw, self and tapping, assorted size tt , spacer, 5.0mm dia assorted size tt , steinmann pin 5.0 mm, stainless steel trocar point 3 faced chuck end assorted size tt , steinmann pin 6.0 mm, stainless steel trocar point 3 faced chuck end assorted size tt , durham pin, stainless pin assorted size tt , kirschner wire, 250 mm long x 1.0 mm dia, both ends trocar point assorted size tt , kirschner wire 250 mm long x 1.5 mm dia, both ends trocar point assorted size tt , kirschner wire 250 mm long x 2.0 mm dia, both ends trocar point assorted size tt , kirschner wire, smooth, length 150 mm with double trocar tip 1.5 mm to 3 mm at 0.5 mm increments. assorted size tt , kirschner wire, smooth, length 150 mm with double end diamond tip.1.5 mm to 3 mm at 0.5 mm increments. assorted size tt , kirschner wire 15 cm long x 1.5 mm dia, both ends trocar point , kirschner wire 15cm x 2mm, both ends trocar assorted size tt , threaded kirschner wire stainless steel 1.5mm dia assorted size tt , olive wire for ilizarov bayonet tip, 1.5x300mm assorted size tt , threaded guide wire, 3.2mm diameter with stop, length 25 cm approx. assorted size tt , guide wire 2.5 mm dia x 22 cm , threaded guide wire 2.5 mm dia x 22 cm assorted size tt , schanz screws 2.5mm self drilling and tapping 100 mm length. assorted size tt , schanz pins dia 2.5 mm x 150 mm. assorted size tt , schanz pins dia 4 mm x 150 mm. assorted size tt , schanz pin 3.5 mm dia,self drilling and tapping 100 mm length. assorted size tt , hydroxyapatite coated schanz pin size 6 or 5mm assorted size tt , hydroxyapatite coated tapered schanz pin size 4.5 or 3.5 mm assorted size tt , circlage wire ,18,20, 22 gauge, assorted size tt , drill bits solid 1.5 mm assorted size tt , drill bits solid 2.0 mm assorted size tt , drill bits solid 2.5 mm assorted size tt , drill bits solid 3.2 mm assorted size tt , drill bits solid 3.5 mm assorted size tt , drill bits solid 4.5 mm assorted size tt , long drill bits for 4.9 mm interlocking bolts assorted size tt , drill bits solid for 5 mm locking screws. assorted size tt , washer for cannulated cancellous screw large 13 mm assorted size tt , washer for cannulated cancellous screw small assorted size tt , cannulated cancellous screws 6.5 mm, fully threaded assorted size tt , cannulated cancellous screws 6.5 mm, partially threaded, thread length 16 mm assorted size tt , cannulated cancellous screws 6.5 mm, partially threaded assorted size tt , cancellous screws, large fragment, 6.5 mm, fully threaded assorted size tt , cancellous screws large fragment , 6.5 mm, partially threaded, assorted size tt , cancellous screws large fragment, 6.5 mm, partially threaded assorted size tt , malleolar screw with trephine tip 4.5 mm ,titanium, , cannulated cancellous screws 4.0 mm partially threaded assorted size tt , cancellous screws, small fragment, 4.0 mm, fully threaded assorted size tt , headless compression screw 3.0mm assorted size tt , headless compression screw, 2.4 mm short thread assorted size tt , ao type joint spanning external fixator complete set with 04 x250 mm long ss tubes 11mm diameter, 02x150mm long ss tubes , ao type external fixator set for tibia consisting of 2 x 300 mm long stainless steel tube 11 mm dia, 6 x 5mm self drilling or tapping shanz screw , ao type external fixator set for femur consisting of 2 x 400 mm long stainless steel tube 11 mm dia, , universal mini external stabilization system set complete, jess, for ctev large assorted size tt , universal mini external stabilization system set complete, jess, for ctev medium assorted size tt , universal mini external stabilization system set complete, jess, for ctev small assorted size tt , paediatric rail fixator system, rail 150 mm long, 02 x clamps, 2x cd units, threaded schanz screws 4.5 and 5 mm x 4, 1 set assorted size tt , rail fixator adult with 400 mm rail, 03x mounted locks and 09 tapered schanz screws 5 or 6mm complete set. assorted size tt , mono rail external limb reconstruction system ,lrs, consisting of following 01 x mono rail 300 mm, 01 x central clamp , ilizarov fixator frame complete set for deformity correction tibia, adult, consisting of 10 x160mm carbon fibre half rings,2x 160 mm 5 or 8 carbon fibre rings, , ilizarov fixator frame complete, bipolarhead and shortneck45mm, bipolarhead and shortneck47mm, cemented modular bipolar hip prosthesis with colarless polished femoral stem and compatible bipolar head with highly cross linked polyethylene l, uncemented thr prosthesis,metal on xlpe, consisting of 1. uncemented fully porous coated acetabular cup ,option of cluster screw holes or no holes,2.highlycrosslinkedpolyethylene liner,option, uncementedthrprosthesis,metalon xlpe, set consisting of 1. uncementedacetabular cup, 2. highly cross linked polyethylene liner,option of neutral and elevated liner,, 3. uncemented, posterior stabilized fixed bearing modular knee replacement prosthesis, cemented consisting of 1. cobalt chromium ps femoral, posterior stabilized modular knee replacementprosthesis,cemented and high flexion consisting of 1. cobalt chromium high flex ps femoral componen., monoblock radial head prosthesis with smooth stem with diameter 5.5 to 8.5 mm and radial head diameter from 19 to 25 dai., dynamic compression plate ,dcp, large fragment 4.5 mm narrow titanium with cortical screw assorted size., dynamic compression plate, low contact ,lc dcp, large fragment 3.5 mm titanium cortical screw assorted size., dynamic compression plate ,dcp, small fragment 3.5 mm titanium with cortical screw assorted size., mini fragment plate 2.7 mm with 6 screws ,titanium, assorted size, locking compression plate, combination hole small fragment 3.5 mm with 4 cortical and 4 locking screws ,titanium, assorted size., locking compression plate, combination hole large fragment 4.5 mm with 6 cortical and 4 locking screws ,titanium, assorted size, locking compression plate, combination hole small fragment 3.5 mm with 4 cortical and 4 locking screws .,titanium, assorted size, trochanteric hook plate assorted size., locking eight plate for hemiepiphysiodesis with compatible locking screws assorted size, clavicular hook plate lcp complete construct with 03 cortical screws and 02 locking screws, left or right side ,titanium, assorted size, clavicular anatomical plate 3.5 mm complete construct for left or right side with 6 cortical screws ,titanium, assorted size, distal end clavicular plate ,right or left,, low profile with 4 locking and 4 cortical screws complete construct ,titanium, assorted size., proximal humerus anatomical locking plate complete construct with 6 locking and 4 cortical screws ,titanium, assorted size., distal humerus extraarticular plate 3.5 mm ,left or right,, complete construct with 6 locking and 4 cortical screws ,titanium, assorted size., distal humerus anatomical medial plate 3.5 mm ,left or right,, complete construct with 6 locking and 4 cortical screws ,titanium, assorted size, distal humerus anatomical posterolateral plate. 3.5 mm ,left or right, complete construct with 6 locking and 4 cortical screws ,titanium, assorted size, olecranon plate, anatomical 3.5 mm right or left complete construct with 6 locking and 4 cortical screws ,titanium, assorted size, distal radius volar locking plate complete construct with 6 locking and 3 cortical screws ,titanium, assorted size, distal radius locking plate, variable angle complete construct with 6 locking and 3 cortical screws ,titanium, assorted size, distal radius lcp t plate 3.5mm, complete construct with 3 locking and 3 cortical screws ,titanium, assorted size, proximal femoral anatomical locking plate ,right or left, complete construct with 06 cortical screws and 06 locking screws ,titanium, assorted size, distal femur lateral periarticular locking plate ,left or right, complete construct with 06 locking cancellous screws, 04 cortical screws and 04 locking screws ,titanium, assorted size, proximal tibial lateral periarticular locking plate system ,left or right, complete construct with 04 metaphyseal locking cancellous screws, 02 cortical screws, 03 locking screws. assorted size, proximal medial tibial locking plate system, ,left or right,, complete construct with 03 locking screws and 03 cortical screws ,titanium, assorted size, anterolatereal distal tibial periarticular plate system, ,left or right, complete construct with 06 locking and 03 cortical screws ,titanium, assorted size, distal tibial medial low profile periarticular plating system ,left or right, complete construct with 06 locking screws and 03 cortical screws ,titanium, assorted size, calcaneum anatomical plate system ,right or left, low profile, complete construct with with 6 locking screws ,titanium, assorted size, high tibial osteotomy fixed angle platingsystem with screws ,titanium, assorted size, cortex screw 2.7mm assorted size tt, 3.5mm cortex screw, self and tapping, assorted size tt, 3.5mm locking head screw, self and tapping, assorted size tt, 4.5mm cortex screw, self and tapping, assorted size tt, 5.0mm locking head screw, self and tapping, assorted size tt, spacer, 5.0mm dia assorted size tt, steinmann pin 5.0 mm, stainless steel trocar point 3 faced chuck end assorted size tt, steinmann pin 6.0 mm, stainless steel trocar point 3 faced chuck end assorted size tt, durham pin, stainless pin assorted size tt, kirschner wire, 250 mm long x 1.0 mm dia, both ends trocar point assorted size tt, kirschner wire 250 mm long x 1.5 mm dia, both ends trocar point assorted size tt, kirschner wire 250 mm long x 2.0 mm dia, both ends trocar point assorted size tt, kirschner wire, smooth, length 150 mm with double trocar tip 1.5 mm to 3 mm at 0.5 mm increments. assorted size tt, kirschner wire, smooth, length 150 mm with double end diamond tip.1.5 mm to 3 mm at 0.5 mm increments. assorted size tt, kirschner wire 15 cm long x 1.5 mm dia, both ends trocar point, kirschner wire 15cm x 2mm, both ends trocar assorted size tt, threaded kirschner wire stainless steel 1.5mm dia assorted size tt, olive wire for ilizarov bayonet tip, 1.5x300mm assorted size tt, threaded guide wire, 3.2mm diameter with stop, length 25 cm approx. assorted size tt, guide wire 2.5 mm dia x 22 cm, threaded guide wire 2.5 mm dia x 22 cm assorted size tt, schanz screws 2.5mm self drilling and tapping 100 mm length. assorted size tt, schanz pins dia 2.5 mm x 150 mm. assorted size tt, schanz pins dia 4 mm x 150 mm. assorted size tt, schanz pin 3.5 mm dia,self drilling and tapping 100 mm length. assorted size tt, hydroxyapatite coated schanz pin size 6 or 5mm assorted size tt, hydroxyapatite coated tapered schanz pin size 4.5 or 3.5 mm assorted size tt, circlage wire ,18,20, 22 gauge, assorted size tt, drill bits solid 1.5 mm assorted size tt, drill bits solid 2.0 mm assorted size tt, drill bits solid 2.5 mm assorted size tt, drill bits solid 3.2 mm assorted size tt, drill bits solid 3.5 mm assorted size tt, drill bits solid 4.5 mm assorted size tt, long drill bits for 4.9 mm interlocking bolts assorted size tt, drill bits solid for 5 mm locking screws. assorted size tt, washer for cannulated cancellous screw large 13 mm assorted size tt, washer for cannulated cancellous screw small assorted size tt, cannulated cancellous screws 6.5 mm, fully threaded assorted size tt, cannulated cancellous screws 6.5 mm, partially threaded, thread length 16 mm assorted size tt, cannulated cancellous screws 6.5 mm, partially threaded assorted size tt, cancellous screws, large fragment, 6.5 mm, fully threaded assorted size tt, cancellous screws large fragment , 6.5 mm, partially threaded, assorted size tt, cancellous screws large fragment, 6.5 mm, partially threaded assorted size tt, malleolar screw with trephine tip 4.5 mm ,titanium,, cannulated cancellous screws 4.0 mm partially threaded assorted size tt, cancellous screws, small fragment, 4.0 mm, fully threaded assorted size tt, headless compression screw 3.0mm assorted size tt, headless compression screw, 2.4 mm short thread assorted size tt, ao type joint spanning external fixator complete set with 04 x250 mm long ss tubes 11mm diameter, 02x150mm long ss tubes, ao type external fixator set for tibia consisting of 2 x 300 mm long stainless steel tube 11 mm dia, 6 x 5mm self drilling or tapping shanz screw, ao type external fixator set for femur consisting of 2 x 400 mm long stainless steel tube 11 mm dia,, universal mini external stabilization system set complete, jess, for ctev large assorted size tt, universal mini external stabilization system set complete, jess, for ctev medium assorted size tt, universal mini external stabilization system set complete, jess, for ctev small assorted size tt, paediatric rail fixator system, rail 150 mm long, 02 x clamps, 2x cd units, threaded schanz screws 4.5 and 5 mm x 4, 1 set assorted size tt, rail fixator adult with 400 mm rail, 03x mounted locks and 09 tapered schanz screws 5 or 6mm complete set. assorted size tt, mono rail external limb reconstruction system ,lrs, consisting of following 01 x mono rail 300 mm, 01 x central clamp, ilizarov fixator frame complete set for deformity correction tibia, adult, consisting of 10 x160mm carbon fibre half rings,2x 160 mm 5 or 8 carbon fibre rings,, ilizarov fixator frame complete set for deformity correction tibia, paediatric, consisting of 8x130 mm carbon fibre half rings,2x 130 mm, distal radius external fixator system with distractor compression unit, 02 x 3.5 mm and 02 x 2mm schanz screws assorted size tt, 6.5 mm cancellous screw titanium 20, 25, 30, 35, 40, 50 mm assorted size tt, hip u drape set made of impermeable fabric triple layer consisting of 1. two large water proof, unilateral total knee replacement drape set, impermeable control pulse fabric with triple layer consisting of 1, sterile disposal knee arthroscopy drape with fluid collection ponch, conforming circular fenestration, sterile disposal shoulder arthroscopy drapes pack with fluid collection bag with port, sterile disposal hip drape pack. pack should have one u drape and 4 sterile sheet of water proof material, sterile disposal knee drapes pack. pack should have one o drape and 4 sterile sheet of water proof material, vertical isolation drape ,sterile, for hip surgery, sterile covers for c and arm, iodinated adhesive incise drape different size large, iodinated adhesive incise drape different size medium, iodinated adhesive incise drape different size small, sterile skin marking pencil, cling drape film role sterile transparent, orthopaedic tear resistant gloves different sizes, size 7 or 7.5 or 8, ultra thick 0.33 mm, 40 percent thicker than regular gloves with textured surface and dark colour to decrease reflective glare, joint imgation fluid 3 ltr collapsible pack, normal saline, battery operated sterile disposal pulsatile lavage system, long cautery tip, post and operative transparent wound dressing with absorbent pad 10x 15 cm, post and operative transparent wound dressing with absorbent pad 10 x 25 cm, post and operative transparent wound dressing with absorbent pad 10x 08 cm, post and operative transparent wound dressing with absorbent pad 05 x 07 cm, collagen for wound dressing, vacuum dressing set consisting of small size polyurethane foam, pressure sensor, sealing material, tubing and cannister., vacuum dressing set consisting of medium size polyurethane foam, pressure sensor, sealing material, tubing and cannister., vacuum dressing set consisting of large size polyurethane foam, pressure sensor, sealing material, tubing and cannister., pico 15x15 cm, knitted fibreglass impregnated resin cast rolls 15xm ,width,, bandage plater of paris 10 cm x 3 meters, bandage plater of paris 15 cm x 3 meters, cotton cast padding ortho roll ,10 cm x 3 meters,, cotton cast padding ortho roll ,15 cm x 3 meters,, interlocking cannulated tibial nail with 4 x locking bolts, and 01 end cap ,titanium, assorted size, tibial nail with multiple proximal interlocking options and tip locking with 6 x locking bolts, and 01 end cap ,titanium, assorted size, antegrade femoral nail system complete construct ,right or left, with 04 locking bolts and 01 end cap ,titanium, assorted size, distal femoral nail ,left or right, complete construct with 02 distal locking bolts, 02 proximal locking bolts, 01 end cap ,titanium, assorted size, long proximal femoral nail ,left or right, complete construct with 02 lag screw, 02 locking bolts, 01 end cap ,titanium, assorted size, short proximal femoral nail, antirotation ,left or right, complete construct with 01 spiral blade, 02 locking bolts, 01 end cap ,titanium, assorted size, titanium elastic nail with end cap tt assorted size, telescopic intramedullary system self extending rod withfemale and male component assorted size, interlocking humeral nail, cannulated, for humerus complete construct with 04 interlocking bolts and 01 end cap. ,titanium, assorted size, antibiotic coated femoral nail with 4 x locking bolts, and 01 end cap ,titanium, assorted size, antibiotic coated tibial nail with 4 x locking bolts, and 01 end cap ,titanium, assorted size, ankle arthrodesis nail system with 02x proximal locking and 02x distal locking bolts, 01 x calcaneal locking bolt option ,,titanium, assorted size, clavicle brace ,small,medium,large,, arm sling pouch and large, arm sling pouch and medium, shoulder abduction support and universal, neoprene shoulder immobilizer, neoprene wrist and thumb support, tennis elboe support, arm sling pouch paediatric, gel exercise ball and medium, rom elbow brace, long knee brace, large, long knee brace, medium, knee cap, elastic ,xl,, knee cap, elastic ,large,, knee cap, elastic ,medium,, knee cap, elastic ,small,, rom knee brace, hinged knee brace with open patella, foot drop splint, heel cup, silicon or carbon copolymer, medial arch support universal size for adult, medial arch support paediatric, heel cushion, toe seperator, pelvic binder ,size and l,xl or xxl,, coccyx cushion hard universal, skin traction kit, walker, adjustable and foldable, elbow crutch, aluminium,adjustable height, with rubber ferule, walking stick monopod, walking stick tetra pod, hip abduction brace, traction weght bag and universal and capicity upto 12kg, hot and cold pack, size universal reusable, patellar support brace, ctev brace, protective goggles reusable
Agency / Dept :
Due Date :
Jun 15, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15894887
Location : bathinda , punjab
Source : GEM Tenders
corrigendum tender for flood water rescue helmet , heavy duty working gloves , squadron plus cpr manikin pack of 05 with lung bag , working lamp with wire of 6mm dia 50meter long , safety goggles, rescue and safety equipment, highimpact abs plastic high temperature thermoplastic fibre glass reinforced composite with eva foam or eps foam or pe foam 800 gm at max 52 cm to 65 cm 06 to 11 drain holes for quick water escape adjustable 3 or 4 point chin strap and quick release buckle colour orange impact resistance penetration resistance saltwater & freshwater resistance standard required en 1385 2012 and nfpa1952, heavy duty working gloves material should be doublelayered cowhide leather with kevlar or aramid heat resistant inner lining and reinforced palm application suitable for handling and operation of cutting equipment such as rr saw concrete cutter chain saw rescue lifting debris handling rope work and other rescue operations during field trials grip anti slip reinforced palm with vibration absorption padding for secure grip and reduced hand fatigue during operation protection en388 2016 level 4 or above cut resistant abrasion resistant tear resistant and puncture resistant compliance certificate and lab test report to be provided cuff length extended cuff for wrist and forearm protection minimum 10 cm physical measurement to be verified flexibility designed to allow firm grip and free finger movement without compromising protection during rescue tasks sizes available in medium large extra large as per buyer requirement physical verification to be conducted weather compatibility suitable for hot humid wet and dusty environments field trial to be conducted washability reusable and washable without loss of grip strength or protective performance practical verification required standard conforming to en 388 2016 level 4 or above or equivalent standard compliance certificate mandatory, specifications adult manikin set for cpr training with provision of manoeuvring airway opening skills air ventilation and chest compression it should be made up of good quality of rubber and plastic it should be composed of 05 parts length of the mannequin 50 to 70 cms width of the chest 30 to 40 cms the mannequin should be in 5 parts head size length 19 to 25 cms width 12 to 15 cms main body back side length of the back 48 to 68 cms width 28 to 40 cms length of the neck 16cms to 18 cms can be compressed by 4 to 7 cms piston dia of the piston 12 to 15 cms subject to fit over the hole on the back height of the piston 7 to 10 cms it will be in three parts mouth size length 12 to 13 cms width 4 to 7 cms the mouth leads into windpipe windpipe should be spherical in shape when inflated circumference 10 to 12 cms lung radius 6 to 7 cms length 48 to 52 cms width 3 to 4 cms note for detailed specification kindlye reffer attached item wise specification documents all components should be durable and designed for repeated training cycles the product must be easy to assemble disassemble and maintain, working lamp with wire of 6 mm length 50 meter cable type portable industrial rescue working lamp with led illumination illumination minimum 1500 to 3000 lumens 150 watt to 300 watt with wide area lighting cable length heavy-duty insulated cable of 50 meter length with wire of 6mm including 3 pin plug 16 amp min weather protection full weather protection suitable for all conditions water proof rain resistant dust proof moisture humidity resistant corrosion rust resistant cable protection oil water and abrasion resistant heavy-duty cable power supply compatible with 220 to 240v ac supply with industrial plug lamp protection shockproof cage stainless steel mesh protection around lamp waterproofing minimum ip65 protection oem certificate or undertaking of firm handle insulated anti slip carrying handle heat resistance lamp body should withstand prolonged operational heat portability compact and easy to deploy during disaster operations safety features fuse overload protection and earthing provision operating environment suitable for rain debris dust and humid conditions carrying bag product should be made available with good quality carrying case for safe storage and easy transportation of lamp and cable note all items must be of high quality durable and suitable for ndrf rescue operations products should be field tested and certified as required compliance with relevant national international standards is mandatory, e 507 dust and liquid splash protection goggles technical specs product e 507 dust and liquid splash protection goggles description clear hard coated anti fog pack type blister pack standards certified with ansi z87 1 and is 8521 1 for assured performance and reliability specification details lens type 5 base curve spherical lens design provides a wide field of vision for enhanced peripheral visibility high impact resistant lens for robust protection uv protection to safeguard eyes from harmful sun exposure anti fog lens treatment ensures clear vision in humid or high-temperature environments hard coating makes the lens highly resistant to scratches and chemicals frame double injection frame with a soft nose bridge ensures durability and comfort with dual material construction soft nose bridge provides comfort for prolonged wear without irritation headband superior textile headband with side hook and back adjuster ensures a secure fit and superior comfort adjustable back strap for personalized sizing ventilation indirect ventilation for airflow without compromising protection from splashes or dust compatibility over the glass design allowing users to wear prescription eyewear underneath the goggles applications suitable for ndrf operations these goggles are suitable for various ndrf operations including but not limited to cutting operations suitable for cutting with equipment like rr saw concrete cutter chain saw and other cutting tools debris handling protects eyes from dust fine particles and flying debris rescue operations suitable during search and rescue lifting rope work and emergency response drilling & material handling provides protection from dust and particles during drilling and general handling
Agency / Dept :
national disaster response force NDRF
Due Date :
Jun 23, 2026
Tender Value :
23.9L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15912115
Location : bathinda , punjab
Source : GEM Tenders
corrigendum tender for flood water rescue helmet , heavy duty working gloves , squadron plus cpr manikin pack of 05 with lung bag , working lamp with wire of 6mm dia 50meter long , safety goggles, rescue and safety equipment, highimpact abs plastic high temperature thermoplastic fibre glass reinforced composite with eva foam or eps foam or pe foam 800 gm at max 52 cm to 65 cm 06 to 11 drain holes for quick water escape adjustable 3 or 4 point chin strap and quick release buckle colour orange impact resistance penetration resistance saltwater & freshwater resistance standard required en 1385 2012 and nfpa1952, heavy duty working gloves material should be doublelayered cowhide leather with kevlar or aramid heat resistant inner lining and reinforced palm application suitable for handling and operation of cutting equipment such as rr saw concrete cutter chain saw rescue lifting debris handling rope work and other rescue operations during field trials grip anti slip reinforced palm with vibration absorption padding for secure grip and reduced hand fatigue during operation protection en388 2016 level 4 or above cut resistant abrasion resistant tear resistant and puncture resistant compliance certificate and lab test report to be provided cuff length extended cuff for wrist and forearm protection minimum 10 cm physical measurement to be verified flexibility designed to allow firm grip and free finger movement without compromising protection during rescue tasks sizes available in medium large extra large as per buyer requirement physical verification to be conducted weather compatibility suitable for hot humid wet and dusty environments field trial to be conducted washability reusable and washable without loss of grip strength or protective performance practical verification required standard conforming to en 388 2016 level 4 or above or equivalent standard compliance certificate mandatory, specifications adult manikin set for cpr training with provision of manoeuvring airway opening skills air ventilation and chest compression it should be made up of good quality of rubber and plastic it should be composed of 05 parts length of the mannequin 50 to 70 cms width of the chest 30 to 40 cms the mannequin should be in 5 parts head size length 19 to 25 cms width 12 to 15 cms main body back side length of the back 48 to 68 cms width 28 to 40 cms length of the neck 16cms to 18 cms can be compressed by 4 to 7 cms piston dia of the piston 12 to 15 cms subject to fit over the hole on the back height of the piston 7 to 10 cms it will be in three parts mouth size length 12 to 13 cms width 4 to 7 cms the mouth leads into windpipe windpipe should be spherical in shape when inflated circumference 10 to 12 cms lung radius 6 to 7 cms length 48 to 52 cms width 3 to 4 cms note for detailed specification kindlye reffer attached item wise specification documents all components should be durable and designed for repeated training cycles the product must be easy to assemble disassemble and maintain, working lamp with wire of 6 mm length 50 meter cable type portable industrial rescue working lamp with led illumination illumination minimum 1500 to 3000 lumens 150 watt to 300 watt with wide area lighting cable length heavy-duty insulated cable of 50 meter length with wire of 6mm including 3 pin plug 16 amp min weather protection full weather protection suitable for all conditions water proof rain resistant dust proof moisture humidity resistant corrosion rust resistant cable protection oil water and abrasion resistant heavy-duty cable power supply compatible with 220 to 240v ac supply with industrial plug lamp protection shockproof cage stainless steel mesh protection around lamp waterproofing minimum ip65 protection oem certificate or undertaking of firm handle insulated anti slip carrying handle heat resistance lamp body should withstand prolonged operational heat portability compact and easy to deploy during disaster operations safety features fuse overload protection and earthing provision operating environment suitable for rain debris dust and humid conditions carrying bag product should be made available with good quality carrying case for safe storage and easy transportation of lamp and cable note all items must be of high quality durable and suitable for ndrf rescue operations products should be field tested and certified as required compliance with relevant national international standards is mandatory, e 507 dust and liquid splash protection goggles technical specs product e 507 dust and liquid splash protection goggles description clear hard coated anti fog pack type blister pack standards certified with ansi z87 1 and is 8521 1 for assured performance and reliability specification details lens type 5 base curve spherical lens design provides a wide field of vision for enhanced peripheral visibility high impact resistant lens for robust protection uv protection to safeguard eyes from harmful sun exposure anti fog lens treatment ensures clear vision in humid or high-temperature environments hard coating makes the lens highly resistant to scratches and chemicals frame double injection frame with a soft nose bridge ensures durability and comfort with dual material construction soft nose bridge provides comfort for prolonged wear without irritation headband superior textile headband with side hook and back adjuster ensures a secure fit and superior comfort adjustable back strap for personalized sizing ventilation indirect ventilation for airflow without compromising protection from splashes or dust compatibility over the glass design allowing users to wear prescription eyewear underneath the goggles applications suitable for ndrf operations these goggles are suitable for various ndrf operations including but not limited to cutting operations suitable for cutting with equipment like rr saw concrete cutter chain saw and other cutting tools debris handling protects eyes from dust fine particles and flying debris rescue operations suitable during search and rescue lifting rope work and emergency response drilling & material handling provides protection from dust and particles during drilling and general handling
Agency / Dept :
national disaster response force NDRF
Due Date :
Jun 24, 2026
Tender Value :
23.9L
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Fibre Component. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Fibre Component sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Fibre Component Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Fibre Component, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Fibre Component Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Fibre Component Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Fibre Component.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Fibre Component depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Fibre Component Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Fibre Component bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Fibre Component. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Fibre Component, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Fibre Component, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Fibre Component?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Fibre Component tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Fibre Component?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Fibre Component, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Fibre Component is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All