sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

48Latest Digital dc drive Tenders List

Latest Digital dc drive Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Digital dc drive tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Digital dc drive tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Digital dc drive Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Digital dc drive tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Digital dc drive Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Digital dc drive Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Digital dc drive Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Digital dc drive tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Digital dc drive Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Digital dc drive sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Digital dc drive tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Digital dc drive tenders.

Is EMD mandatory for all Digital dc drive tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Digital dc drive work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Digital dc drive tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Digital dc drive Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16988528
Location : coimbatore , tamil nadu
Source : GEM Tenders
NEW TENDER
corrigendum tender for item 1 , item 2 , item 3 , item 4 , item 5 , item 6 , item 7 , item 8 , item 9 , item 10 , item 11 , item 12 , item 13 , item 14 , item 15 , item 16 , item 17 , item 18 , item 19 , item 20 , item 21 , item 22 , item 23 , item 24 , item 25 , item 26 , item 27 , item 28 , item 29 , item 30 , item 31 , item 32 , item 33 , item 34 , item 35 , item 36 , item 37 , item 38 , item 39 , item 40 , item 41 , item 42 , item 43 , item 44 , item 45 , item 46 , item 47 , item 48 , item 49 , item 50 , item 51 , item 52 , item 53 , item 54 , item 55 , item 56 , item 57 , item 58 , item 59 , item 60 , item 61 , item 62 , item 63 , item 64 , item 65 , item 66 , item 67 , item 68 , item 69 , item 70 , item 71 , item 72 , item 73 , item 74 , item 75 , item 76 , item 77 , item 78 , item 79 , item 80 , item 81 , item 82 , item 83 , item 84 , item 85 , item 86 , item 87 , item 88 , item 89 , item 90 , item 91 , item 92 , item 93 , item 94 , item 95 , item 96 , item 97 , item 98 , item 99 , item 100 , item 101 , item 102 , item 103 , item 104 , item 105 , item 106 , item 107 , item 108 , item 109 , item 110 , item 111 , item 112 , item 113 , item 114 , item 115 , item 116 , item 117 , item 118 , item 119 , item 120, supply of electrical spares, 1600a main moving contacts, cat ref. no. 16d / 16n, movmain 16d, for c&s make acb aha series, 2500 a main isolating contacts (jaw contacts), cat ref. no. 25d / 25n-30s, cs-mic-25d, set of 2, for c&s make acb aha series, 1600 a main isolating contacts (jaw contacts), cat ref. no. 16d / 16n, cs-mic-16d, set of 2, for c&s make acb aha series, 4pole 1600 a arcing contacts, , cat. ref. no. 16d / 16n, cs-arccont-16d, (set of 1 no. fixed 1 no. moving), for c&s make acb aha series, 2500 a acb pole separator (barrier), cat no. pole-septr-20-25, for c&s make acb aha series, 36 way set of three contact block on acb side & six block on cradle side, cat. ref. no. 6d-16d/06n-20s, 4p, cs-aih-3-116 (4p), for c&s make acb aha series, 36 way set of three contact block on acb side & six block on cradle side, cat. ref. no. 20d-25d/25n-30s, 4p, cs-aih-3-220 (4p), current transfomer 1600/0.2 a, cat. ref. no. cs-wmct-164, cs-atbwm-160, for c&s make acb aha series, current transformer 2500/0.2 a, cat. ref. no. cs-wmct-164, cs-atbwm-225 for c&s make acb aha series, shunt trip coil cat. ref. no. 6d-16d /08n 208 & 20d -40d/30s-40s (aha), cs-avh-s-220-xx for c&s make acb aha series, closing coil cat. ref. no. 6d-16d /08n-20s ( aha ) & 20d -40d/30s-41s (aha), cs-avh-c-220-xx for c&s make acb aha series, uv coil ct. ref. no. 6d-16d/06n-20s, cs-auh-v-a-xx for c&s make acb aha series, uv coil cat. ref. no. 20d-40d/25n-40s / 50c-60c , cs-auh-v-b-xx, for c&s make acb aha series, 1600a , 4p frp shutter assebly 6d-16d / 06n-16n, 4 pole, cat. ref. no. ash-1 (4p), for c&s make acb aha series, 2500a , 4p frp shutter assebly 20d-25d/30s, 4 pole cat. ref. no. ash-2 (4p), for c&s make acb aha series, auxillary switch 14 way (7no+7nc) cat. ref. no. 6d-16d/06n-20s cs-axh-7a7b-116, for c&s make acb aha series, auxillary switch 14 way cat. ref. no. 20d-40d/25n-40s / 50c-60c cs-axh-7a7b-22 0, for c&s make acb aha series, arc chutes cat. ref. no. 25d/30s, cs-arccht-25d, for c&s make acb aha series, arc chutes cat. ref. no. 6d-16d/06n-20n, cs-arccht-06d-16d, for c&s make acb aha series, 1600a/2500a closing latch for c&s make acb aha series, micro switch for motor cut off 6d-40d/06n-40s /50c-60c, model- microsw, for c&s make acb aha series, 2500 a trip shaft, for c&s make acb aha series, 1600 a trip shaft, for c&s make acb aha series, supply of c&s make acb, ah-25d 4p edo with micropro-5.1t with complete set, communication module for micropro 4.1/5.1 release. model- cspscm-micropro for c&s make acb aha series, c-power acb 1000a uv coil, 240v, 50hz ac for l&t make, model- sl92720b000, c-power acb 1000a shunt coil, 240v, 50hz ac for l&t make, model- sl927180b00, c-power acb 1000a closing coil, 240v, 50hz ac for l&t make, supply of 3 phase multi function meter rishi master 3440 with support rs port 485., 100 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse1m125atm4p-x., 125 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse1m125atm4p-x, 160 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse2m250atm4p-x, 200 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse2m250atm4p-x, 63 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv510345., 125 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv516342, 160 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv516343, 200 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv525342, 250a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv525343, 400a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv540309, 10kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4102j040 complete as required., 20kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4202j040 complete as required., 25 kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4252j040 complete as required., cylindrical hrc fuse links type hf of rating 63 amps, make- - l&t, cat no- - sf90159, or equivalent, cylindrical hrc fuse links type hf of rating 40 amps, make- - l&t, cat no- - sf90143, or equivalent, cylindrical hrc fuse links type hf of rating 32 amps, make- - l&t, cat no- - sf90142, or equivalent, cylindrical hrc fuse links type hf of rating 16 amps, make- - l&t, cat no- - sf90150, or equivalent, off set clip in type fuse links type hbc of rating 2 amps, type- cns, iec 269,, off set clip in type fuse links type hbc of rating 4 amps, type- cns, iec 269,, off set clip in type fuse links type hbc of rating 6 amps, type- cns, iec 269,, 63a on-load changeover switch (manual) in sheet steel enclosure, suitable for switching between two power sources (mains and standby supply), with ac-23a utilization category, 4 pole, suitable for 415v, 50hz, three-phase system., supply of 32a motor protection circuit breaker (mpcb), suitable for three-phase motor protection, with adjustable thermal overload and magnetic short-circuit protection, conforming to relevant is/iec standards., 1.5 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (fr-lsh) grade wires suitable for domestic and industrial purpose (each - 90 mtrs. coil), 2.5 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (frls) grade wires suitable for domestic and industrial purpose (each - 90 mtrs. coil), 4 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (fr-lsh) grade wires suitable for domestic and industrial purpose(each - 90 mtrs. coil), 2 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment)-(each - 100 mtrs. coil), 3 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 3 core 2.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 3 core 4 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment)- (each - 100 mtrs. coil), 8 core 1.0 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 4 core 2.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 6 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), category 6 (cat6) utp lan cable, 4-pair, 23 awg electrolytic grade solid annealed bare copper conductor, hdpe insulated, overall pvc/lszh sheathed, conforming to tia/eia-568-c.2 and iso/iec 11801, suitable for data transmission up to 1 gbps and 250 mhz frequency, complete as required. (each - 100 mtrs. coil), miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. sp mcb, 16 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. dp mcb, 25 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. dp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. tp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp mcb, 63a, c curve, isolator having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp isolator, 100a, 5 pin, 32a, 220-440vac, industrial panel socket with plug ip44 waterproof plug socket male female connector (plug & socket), 6 amps modular one way switch of make- - legrand, model- - myrius, cat no- - 6792 00 or equivalent, 16 amps modular one way switch of make- - legrand, model- - myrius, cat no- - 6792 09 or equivalent, 6 amps modular two way switch of make- - legrand, model- - myrius, cat no- - 6792 01 or equivalent, 6 amps modular bell switch of make- - legrand, model- - myrius, cat no- - 6792 20 or equivalent, 6 amps modular socket of make- - legrand, model- - myrius, cat no- - 6792 35 or equivalent, 16 amps modular socket of make- - legrand, model- - myrius, cat no- - 6792 30 or equivalent, blanking plate of make- - legrand, model- - myrius, cat no- - 6792 76 or equivalent, modular 2 module electronic fan regulator of make- - legrand, model- - myrius, cat no- - 6792 39 or equivalent, 2 module modular pvc surface mounting box with base cover plate, 3 module modular pvc surface mounting box with base cover plate, 4 module modular pvc surface mounting box with base cover plate, 6 module modular pvc surface mounting box with base cover plate, 8 module modular pvc surface mounting box with base cover plate, 12 module modular pvc surface mounting box with base cover plate, 6/16amp combined switch and socket, 3 in one, universal s.s. combined, with safety shutter & pvc gang box., dingdong doorbell, electronic suitable for operation in 220v ac supply, havells/crompton or equilant make, 20 w, 1200 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications. thd lessthan10%, 36w, 1200 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications. thd lessthan10%, 10w, 600 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications., 10w min, b22 led bulb made up of integrated electronic driver along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications., 10w led type bulkhead luminaire with cool white colour temperature, efficiency of led light fitting minimum 110 lm/w, pf equal to 0.95 or more, thd should be less than 10% , minimum ip 65/66 protection with housing material made of high pressure die cast aluminium /standard alloy suitable for outdoor application suitable for operation on 230 v+/- 10%, 50hz, single phase ac supply and as per technical specification with all its accessories, driver etc. as complete., led flood light led luminaire in die-cast aluminium housing, ip66 flood light suitable for operating on voltage range (120 - 270v ac) single phase, 50hz supply of following rating. rating - 100w, led flood light led luminaire in die-cast aluminium housing, ip66 flood light suitable for operating on voltage range (120 - 270v ac) single phase, 50hz supply of following rating. rating - 200w, led flood light luminaire with secondary optical lens having minimum output of 120 lm/watt and rated power not exceeding 250 watts with 5 years warranty designed with powder coated pressure die cast aluminium housing, frame, ms mounting bracket, integral driver with surge protection, heat resistant toughned glass, conforming to ip 65/ip66 & ik 07 protection etc. complete as required. (led & power drive should meet the aai specifications. rating - 250 w led -bajaj praze f 300l wh nb-a5 tg sd model or equilanet, supply of 45w led type streetlight pole arm mountable luminaire with 5700k colour temperature, efficiency of led light fitting minimum 110lm/w, pf equal to 0.95 or more, thd should be less than 10% , minimum ip 65/66 protection with housing material made of high pressure die cast aluminium /standard alloy suitable for outdoor application with manufacturer name/logo embossed in the housing body or on aluminium plate etc. complete as required, all prewired up to terminal block and suitable for operation on 230 v+/- 10%, 50hz, single phase ac supply and as per technical specification with all its accessories, driver etc. as complete., supply of 12w light dome (white in colour) for garden lights, make crompton solar eclipse or suitable for existing pole., supply of 7w led spot light for lift cabin make- philips, model- starfit next or equivalent, supply of 5w, 1 ft led batten light, led type twin dome red aviation obstacle light fixture low intensity type b as per icao annex-14 , ip 66, operating on 230v ac 50 or 60hz input supply (operating band of 90v to 260v ac) direct mounting type complete as required as per the technical specifications., 1200 mm sweep, 5 star rated, bldc motor ceiling fan suitable for operating on 230 v ac etc., 1400 mm sweep, 5 star rated, ceiling fan suitable for operating on 230 v ac etc., 250 mm sweep exhaust fan with pvc body suitable for operation on 230v single phase ac supply 250 mm sweep,, air circulator, bldc pedestal type, 600 mm sweep, having adjustable height feature, aluminium blades, oscillating feature, suitable for operation in 230v ac supply., 400mm sweep wall fan, 5 star rated with 3 nos. of plastic blade having pull cord control feature & vertical adjustable tilt mechanism, oscillation feature, copper winding motor suitable for operation in 230v ac supply, supply of 2-inch size ball type foot valve, made of heavy-duty ci body with ss strainer and rubber/epdm sealing, suitable for water application, supply of 2-inch (dn50) inline digital water flow meter, suitable for measurement of potable water and sewage water flow, complete with sensor, transmitter, and all necessary accessories, as required., supply of 4-inch inline water flow meter (electromagnetic type), suitable for bulk water measurement, supply of 2-inch flow meter suitable for sewage treatment plant (stp) applications, preferably electromagnetic type, corrosion-resistant, with digital indicator, ip68 protection (sensor), complete with cables and accessories. make- frehing, fmf 2040 series, size- 80mm, supply of smc (sheet moulded compound) junction box of size 300 x 200 x 105 mm, suitable for outdoor pole mounting in street lighting applications, made of high-strength frp or smc material, weatherproof, uv resistant, fire retardant (ul94 v 0), with hinged door (right side), complete with gasket, locking arrangement, and provision for cable entry, suitable for 3-phase or 4-core systems, as per sintex model gsjb 3020(1) or approved equivalent, including all accessories required for proper installation., supply of 12 kv, 3.15 a hrc cartridge fuse (pt fuse) conforming to iec 60282 1, suitable for ht panels, item. pt fuse 11kv 3.15a 12abcna 3.15a bussman (set of 3 nos for r y b phases)., supply of portable high-pressure water jet cleaning system suitable for solar pv module cleaning, comprising motorized pressure pump power- 1800w, pressure- 120 bar, flow rate- 6l per min, voltage- 220v, 50hz, spray gun, high-pressure hose, and necessary accessories., supply of solar photovoltaic (pv) modules of capacity 335 wp, based on crystalline silicon technology with multi-crystalline cells, having a rated power output of 335 wp (plus or minus 2 percenet). the module dimensions shall be approximately 1958 mm x 987 mm, with a weight of around 21.2 kg.m make- renewsys india pvt ltd, model. deserv 3m6h 335 or equivalent, conforming to relevant iec standards (iec 61215 or iec 61730), complete in all respects as per specifications and as directed by the engineer-in-charge., supply of portable digital lux level meter suitable for measurement of illumination levels in lux (lx) and foot-candle (fc), for indoor and outdoor lighting assessment applications. the instrument shall have a measuring range up to at least 200,000 lux with high accuracy of plus or minus 3 percenet or better, and shall be suitable for measurement of light from various sources such as led, fluorescent, metal halide, high-pressure sodium, and incandescent lamps. make- fluke, model- fluke 941 light meter, supply of auto day/night on & off photocell, ldr sensor switch for lighting, water proof, suitable for outdoor usage, 230 v ac, 10a supply complete as required. - make - geltech model- gt-ld308 or equialant., supply of led landing h light suitable to replace existing landing h lights operated at 230v 50hz direct input supply. the fitting housing meets ip-66 dust & moisture proof. designed in accordance with icao aerodrome standards-aerodrome design & operators manual for landing direction indicator landing-t lamp advisory with bas fixing pipe flange. light output colour - white., catalog code- ltl-5w-ui, supply of 200w 6.6a bi-pin halogen lamps. (cat no. 64386 osram or equivalent) as required., supply of single phase preventer (phase failure relay) suitable for protection of 3-phase motors against single phasing, phase reversal, and voltage imbalance. the relay shall operate on 415 v ac, 3-phase, 50 hz supply and shall have built-in phase sequence correction and automatic reset feature. make- selec, model- sppa2m2, supply of 50mm dia dwc hdpe pipe isi marked, acb mechanical interlock set l&t make omega model, suitable exisitng panel, supply of digital hour meter (time totaliser), model ltc9a of selec or approved make list of aai, having 7 and half digit lcd display, suitable for cumulative time measurement with voltage or contact input (24 to 260v ac or dc), panel mounting type, battery powered with memory retention, measuring range up to 199999.99 hours, accuracy plus or minus 0.05 percent, with front or reset facility, complete as required.
Agency / Dept :
airports authority of india AAI
Due Date :
Sep 04, 2026 (4 days left)
Tender Value :
49.71L
View Documents
T18 Ref No : 16875087
Location : tiruchirappalli , tamil nadu
Source : GEM Tenders
LIVE TENDER
tender for digital dc drive-sinamics dcm dc converter 6ra80 input: 415/440 vac, 3 phase, armature voltage 400v
Agency / Dept :
munitions india limited MIL
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16811834
Location : domjur , west bengal
Source : GEM Tenders
LIVE TENDER
tender for sewing machine single needle lock stitch , overlock machine 3 thread , zig zag multi purpose machine , double needle machine full digital , button hole machine 4200sti , button sewing machine 3200sti , bar take machine , feed off the arm double needle for medium-weight materials, supply installation and commissioning of machinery for sewing technology, single needle lock stitch industrial model with low back rest tool heavy duty metal frame application stitching for light to medium fabric stitch type snls 301 middle light led type 3 step needle bar strocke 37.2mm lubrication type automatic hook set full rotary stitching length mas 5mm envronment friendly power efficint direct drive in built motor maximum speed 5000 spm pressure bar lift by knee-5.5/ 13mm programable sewing speed push button for half stitch function copper winding motorbetter position of touch panel for ease of use motor type clutch motor wattage 550 watt with stand, 3 thread stitch type 1 needle overlock max. sewing speed max. sewing speed 7000sti/min overedging width 1.5 4.0 needle dc 27 lubrication automatic max lift of the presser foot 7mm, stitch system standard wider zigzag max. sewing speed 5,000 sti/min lift of the presser foot by hand 5.5 mm by knee 10 mm thread take up rotary type lubrication fully automatic needle 134suk nm70, full digitat max. sewing speed 3000 sti/min needle dp 5 hook verticalaxis large hook vertical axis large hook 120 mm height 266 mm distance from machine arm to needle 87 mm height of the jaw section needle bar stroke 33.4mm, sewing speed max. 4200sti/min normal 3600sti/min when the non lubricated hook is used 3300sti/min, precision of needle throwing mechanism, number of stitches automatically computed from the size of the buttonhole and stitch pitch power requirement / power consumption 3 phase 200 240v/250va lift of the work clamp parallel lifting 6mm, max. sewing speed 3,200sti/min button size type round shaped flat button size 8 20mm 301 8 20 stitch length 0.1 10mm 0.1mm step needle dp 17 number of stitches that can be stored in memory max. 20000 stitches, application standard max. sewing speed 3200sti/min stitch length 30mm l 40mm w hook standard shuttle hook number of stitches that can be stored in memory max. 20000 stitches power consumption 250va sewing machine motor 450w compact ac servomotor direct drive system, for medium-weight materials max. sewing speed 4,000sti/min normal 3500sti/min needle schmetz b 64 organ tv 64 ny stitch length 1.2 3.2mm lubrication semi automatic lubrication needle gauge 3.2mm 1/8 4.0mm 5/32 inch 4.8mm 3/16inch 5.6mm 7/32inch 6.4mm 1/4inch
Agency / Dept :
department of industrial training
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16812298
Location : jodhpur , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for tachometer digital , tong tester clamp meter , megger insulation tester , 3- point d.c. starter , 4- point d.c. starter , wheatstone bridge , single phase variable auto transformer , phase sequence indicator , growler , ac starters 1 each , function generator , electric soldering iron , discrete component trainer , domestic appliances 1 each , oil testing kit , inverter with battery , voltage stabilizer , dc power supply , desktop computer , transformer single phase 1 kva , ceiling fan coil winding machine , ev charger 3 phase , plumb bob , set of rowel punch , conduit pipe cutting and threading machines adjustable , conduit pipe bending machine,suitable , torque wrench , solid state solar based single phase , 3 phase kw meter digital , meter reading instrument mri , wire stripper , bus bar bending machine , bldc motor with controller , servo motor with resolver , pmsm with controller , current transformer , potential transformer , solar panel with battery , mppt based charge controller , digital timer on delay and off delay 230v 1 each , impulse relay , dusk and dawn switch , inkjet laser printer , motor-generator ac to dc , d.c. compound generator , dc compound motor with starter and switch , motor generator dc to ac set consisting of , ac squirrel cage motor with star delta starter , ac phase- wound slip ring motor with starter switch , universal motor with starter switch , synchronous motor with accessories like starter, excitation arrangements , thyristor igbt controlled d.c. motor drive with tacho-generator feedback arrangement , thyristor igbt controlled a.c. motor drive with , electrical machine trainer , pillar electric drill machine motorized , motorised bench grinder , a.c. series type motor , single phase capacitor motor with starter switch , manual motor coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter single phase , smart meter 3 phase , bus bar punching machine , rawal tool holder and bit , scriber , foot print grip , spirit level , forge with hand blower , tower ladder on type wheels , portable extension ladder , solar street light , solar traffic light , solar dc pump , motion detector , single phasing preventer , solar street light lamp set , d.c. compound motor with control panel , d.c. shunt motor , d. c. series motor , mg set , cctv camera kit , ups with battery , lcd led projector , dmx controller , field regulator , working bench , wiring board , instructors table , instructors chair , metal rack , lockers with drawers 10 drawer , almirah , black board white board , fire extinguisher co2, 2 kg , fire buckets , student table , student stool , gi pipe bending machine 19 mm to 32 mm , battery charger, 0 - 6 - 9 - 12 - 24 - 48 v, 30 amp , battery charger 15 volts, current controlled , hammer ball peen 250gm , ac starters , automatic reverse forward starter , single phase k.w.h meter digital 5a, 250 v a. c , three phase k.w.h meter digital 25a, 415 v a. c , a.c. voltmeter , milli voltmeter centre zero analog , ammeter mc analog , ac ammeter mi , ammeter mc analog, portable box type housed in bakelite case 0-25 a , ammeter m.c. centre zero 5-0-5amp , crimping tool hydraulic 16-300 sq, lab of electrician and wireman, measuring steel tape, combination plier insulated, screwdriver insulated, pliers long nose insulated, heavy duty screwdriver insulated, screw driver, terminal screw driver, pliers side cutting insulated, punch centre, knife double bladed electrician, neon tester, steel rule, hammer, cross peen with handle 250gm, hammer, ball peen with handle, pincer, c- clamp, d.e. metric spanner double ended 6 - 32 mm, spanner adjustable drop forged, spanner set de, blow lamp brass one litre, chisel firmer with wooden handle, allen key alloy steel, grease gun, bradawl, pully puller with 3 legs 150 mm and 300 mm, bearing puller inside and outside, hand vice, pipe vice cast iron with hardened jaw open type- 100 mm, table vice-100 mm, bench vice-150 mm, crimping tool 1 each, hydraulic crimping tool for ug cable, wire cutter and stripper, mallet hard wood, hacksaw frame, try square-150 mm blade, outside calliper inside calliper 1 each, divider, tweezers, drill s.s. twist block, gauge, wire imperial stainlees steel marked in swg and mm, file half round, file flat, file half round 2nd cut, copper bit soldering iron., de soldering gun, contactor and auxiliary contacts, contactor and auxiliary contacts, limit switch, rotary switch, electromagnetic cutout relay 1 each, portable electric drill machine, cordless drilling machine, load bank heater type, pvc pipe bending spring, brake test arrangement with two spring balance rating, out side micrometer, knife switch dpdt fitted with fuse terminals, knife switch tpdt fitted with fuse terminals, rheostat sliding type, rubber mat, safety belt, ohm meter series type and shunt type, portable box type, multi meter, multifunction meter, voltmeter m.c., ammeter m.i. 0-5 amp, digital wattmeter, power factor meter, frequency meter, lux meter, tachometer digital, tong tester clamp meter, megger insulation tester, 3- point d.c. starter, 4- point d.c. starter, wheatstone bridge, single phase variable auto transformer, phase sequence indicator, growler, ac starters 1 each, function generator, electric soldering iron, discrete component trainer, domestic appliances 1 each, oil testing kit, inverter with battery, voltage stabilizer, dc power supply, desktop computer, transformer single phase 1 kva, ceiling fan coil winding machine, ev charger 3 phase, plumb bob, set of rowel punch, conduit pipe cutting and threading machines adjustable, conduit pipe bending machine,suitable, torque wrench, solid state solar based single phase, 3 phase kw meter digital, meter reading instrument mri, wire stripper, bus bar bending machine, bldc motor with controller, servo motor with resolver, pmsm with controller, current transformer, potential transformer, solar panel with battery, mppt based charge controller, digital timer on delay and off delay 230v 1 each, impulse relay, dusk and dawn switch, inkjet laser printer, motor-generator ac to dc, d.c. compound generator, dc compound motor with starter and switch, motor generator dc to ac set consisting of, ac squirrel cage motor with star delta starter, ac phase-wound slip ring motor with starter switch, universal motor with starter switch, synchronous motor with accessories like starter, excitation arrangements, thyristor igbt controlled d.c. motor drive with tacho-generator feedback arrangement, thyristor igbt controlled a.c. motor drive with, electrical machine trainer, pillar electric drill machine motorized, motorised bench grinder, a.c. series type motor, single phase capacitor motor with starter switch, manual motor coil winding machine, primary current injection set, stepper motor with digital controller, shaded pole motor, smart meter single phase, smart meter 3 phase, bus bar punching machine, rawal tool holder and bit, scriber, foot print grip, spirit level, forge with hand blower, tower ladder on type wheels, portable extension ladder, solar street light, solar traffic light, solar dc pump, motion detector, single phasing preventer, solar street light lamp set, d.c. compound motor with control panel, d.c. shunt motor, d. c. series motor, mg set, cctv camera kit, ups with battery, lcd led projector, dmx controller, field regulator, working bench, wiring board, instructors table, instructors chair, metal rack, lockers with drawers 10 drawer, almirah, black board white board, fire extinguisher co2, 2 kg, fire buckets, student table, student stool, gi pipe bending machine 19 mm to 32 mm, battery charger, 0 - 6 - 9 - 12 - 24 - 48 v, 30 amp, battery charger 15 volts, current controlled, hammer ball peen 250gm, ac starters, automatic reverse forward starter, single phase k.w.h meter digital 5a, 250 v a. c, three phase k.w.h meter digital 25a, 415 v a. c, a.c. voltmeter, milli voltmeter centre zero analog, ammeter mc analog, ac ammeter mi, ammeter mc analog, portable box type housed in bakelite case 0-25 a, ammeter m.c. centre zero 5-0-5amp, crimping tool hydraulic 16-300 sq mm
Agency / Dept :
department of technical education DTE
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16664094
Location : nadia , west bengal
Source : GEM Tenders
LIVE TENDER
tender for workshop items vertical multistage centrifugal pump (q3) , hydraulic trainer kit each consisting of the following matching components and accessories 16 items , slip gauge , snap guage , plug guage , dial test indicator , sine bar , dial vernier caliper , screw thread micrometer , depth micrometer , digital vernier caliper , digital micrometer outside , comparators gauge dial indication , surface roughness comparision plates , vernier beveal procter , carbide wear block , stilson wrenches , pipe cutter wheel type , pipe bender machine , adjjustable pipe chain tonge , adjustavble spanner , combination set , micrometer outside , micrometer intside , vernier caliper , vernier height gauge , vernier bevel protector , file , hacksaw frame , machine vice swivel base , discrete component trainer , linear ic trainer , digital ic trainer , voltage stabilizer , dc power supply , battery charger , current transformer , potential transformer , solar panel with battery , d.c. compound generator , synchronous motor , thyristor igbt controlled dc motor drive , thyristor igbt controlled ac motor drive , electrical machine trainer , motorised bench grinder , ac series type motor , manual motor coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger home , temperature controlled soldering iron , wheat stone bridge with galvanometer and battery , single phase variable auto transformer , phase sequence indicator , growler , ohm meter , milli voltmeter , kilo wattmeter analog , digital wattmeter , a.c. energy meter , frequency meter , magnetic flux meter , lux meter , tachometer , tong tester clamp meter , air ratchet , air impact wrench , chain pulley block capacity with tripod stand , compression testing gauge , engineers stethoscope , piston ring compressor , piston ring expander and remover , hydraulic jack hi lift type , two post car lift capacity 4000 kg , wheel alignment machine computerized 3d optional , torque wrenches , diesel engine crdi 4 stroke , automotive diesel smokemeter for diesel engine , spring tension tester , trolley type portable air compressor , cut section of 4 or 6 cylinder diesel engine with moving condition to show momentum of internal parts , fuel injection test bench for calibration of fuel pump , diesel engine six cylinder in running condition , circulating water pump small , gauge manifold with gauges , dumpy level , auto level , theodolite transit , prismatic compass , dgps latest version , hand gps latest version , rachet type pipe die set , dies and die stock cup model , adjustable spanner , pipe wrench , pipe cutter , hammering hand drilling machine , electric water heater, workshop items, as per specification
Agency / Dept :
department of industrial training
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
50.04L
View Documents
T18 Ref No : 16933440
Location : cachar , assam
Source : GEM Tenders
LIVE TENDER
tender for nut and bolt - metal beds (v3) (q2) , bed mattress conforming to is 13489 (v3) (q2) , folding step ladder 4 ft heavy duty 150 kg capacity anti slip feet locking arrangement with tool tray , folding step ladder 5 ft heavy duty 150 kg capacity anti slip feet locking arrangement with tool tray , adjustable wrench 12 inch long , car freshner , fog light 100w with frame size 7 pt 5 inch x 9 inch , gi wire for lashing purpose , double end spanner set 12 nos chrome vanadium steel conforming to is 2028 sizes 6 x 7 to 30 x 32 mm , grease gun 7 kg heavy duty air operated grease gun with nozzle coupler and grease loader , heavy duty socket set 3 oblique 4 drive sizes 22 to 50 mm with ratchet extensions universal joint t bar spinner handle hex oblque bit sockets and storage box , allen key set hexagonal type 4mm to 16 mm , fine cloth cleaning , long nose pliers 170mm length , pipe wrench 12 inch length , screw driver set , ring spanner set 12 nos chrome vanadium steel sizes 6 x 7 to 30 x 32 mm , screw driver 12 inch , oil filter wrench belt type size 9 inch , ball peen hammer 800 gms - , light duty socket set 46 pcs 1 oblique 4 inch square drive 8 to 32 mm with ratchet extensions universal joint sliding t bar spinner handle hex oblique bit sockets and storage box , flat file with pvc handle rough type size 9 inch , flat file with pvc handle smooth type size 9 inch , flat file with pvc handle rough type size 6 inch , flat file with pvc handle smooth type size 6 inch , half round file with pvc handle rough type size 9 inch , half round file with pvc handle smooth type size 9 inch , half round file with pvc handle rough type size 6 inch , half round file with pvc handle smooth type size 6 inch , round file with pvc handle rough type size 9 inch , round file with pvc handle smooth type size 9 inch , round file with pvc handle rough type size 6 inch , round file with pvc handle smooth type size 6 inch , triangular file with pvc handle rough type size 9 inch , triangular file with pvc handle smooth type size 9 inch , triangular file with pvc handle rough type size 6 inch , triangular file with pvc handle smooth type size 6 inch , regulator for argon gas cylinder , heavy duty circlip plier external , heavy duty circlip plier internal , multipurpose combination tool kit 76 pcs for electrician , feeler gauge size 0 pt 05 mm to 1mm , hexagonal allen key set 1 pt 5 to 10mm , compination plier 8 inch , multimeter digital plus clamp meter , portable hand grinder machine 800 w 100 mm disc 11000 rpm 230 v ac approx 1 pt7 kg with safety guard and side handle , portable hand drilling machine 600w oblique 3000 rpm , hydraulic puller light duty 5 ton , cordless brushless impact wrench half inch drive , hydraulic gear box trolley hduty , hand saw 18 inch , chisel 9 inch long made of hardended iron , center punch 6 inch , electric hand blower 550 w 16000 rpm , stud remover , star allen key set , flower allen key set , piston ring compressor 4 inch 90 to175mm , ring expander 6 inch , hydraulic pressure testing gauge upto 10000 psi , flower socket set 46 pcs 1 oblique 4 inch drive 4 to14 mm sockets with ph obl pz obl fd obl hex obl torx bits ratchet extensions universal joint flexible extension and carry case , diagnostic and scanning tool kit for bs vi vehicle for 12v oblique 24v , jack hyd 20 ton cap heavy duty for veh , industrial dia grinder 400 watts rpm 2700 25 mm dia , professional angle grinder 800w 11000 rpm 100mm 230v 1pt7kg , portable bench top drill machine 13mm 350 to 500 w 230v as per specfication , vernier caliper 12 inch , inside caliper 6 inch , outside caliper 12 inch , reamer 15 to 42 mm , 6x1mm tap and die set , 8x1 pt 25mm tap and die set , 10x1mm tap and die set , 10x1 pt 5mm tap and die set , 12x1 pt 5mm tap and die set , 12x1 pt 75mm tap and die set , 14x1 pt 5mm tap and die set , 14x2mm tap and die set , 1 oblique 4 x 20 tpi tap and die set , 3 oblique 8 x 16 tpi tap and die set , 5 oblique 8 x 11 tpi tap and die set , 7 oblque 16 x 14 tpi tap and die set , 2mm drill bit parallel shank , 2pt 5 mm drill bit parallel shank , 3mm drill bit parallel shank , 3 pt 5mm drill bit parallel shank , 4 mm drill bit parallel shank , 4 pt 5 mm drill bit parallel shank , 5 mm drill bit parallel shank , 5 pt 5 mm drill bit parallel shank , 6 mm drill bit parallel shank , 7 mm drill bit parallel shank , 8 mm drill bit parallel shank , 8 pt 5 mm drill bit parallel shank , 9 mm drill bit parallel shank , 10 mm drill bit parallel shank , 10 pt 5 mm drill bit parallel shank , 11 mm drill bit parallel shank , 11 pt 5 mm drill bit parallel shank , 12 mm drill bit parallel shank , 12 pt 5 mm drill bit parallel shank , 13 mm drill bit parallel shank , 13 pt 5 mm drill bit parallel shank , 14 mm drill bit parallel shank , 14 pt 5 mm drill bit parallel shank , 15 mm drill bit parallel shank , 15 pt 5 mm drill bit parallel shank , 16 mm drill bit taper shank , 16 pt 5 mm drill bit taper shank , 18 mm drill bit taper shank , 19 mm drill bit taper shank , 20 mm drill bit taper shank , 21 mm drill bit taper shank , 22 mm drill bit taper shank , 23 mm drill bit taper shank , 25 mm drill bit taper shank , 30 mm drill bit taper shank , 40 mm drill bit taper shank , 50 mm drill bit taper shank , 60 mm drill bit taper shank , ms rod hexagonal 16mm , ms rod hexagonal 17mm , ms rod hexagonal 18mm , ms rod hexagonal 20mm , ms rod hexagonal 22mm , ms rod hexagonal 25mm , ms rod hexagonal 32mm , ms rod hexagonal 40mm , ms rod hexagonal 50mm , ms rod hexagonal 60mm , nut and bolt 6x1mm x 40mm full thread , nut and bolt 8x1 pt 25mm x 60mm full thread , nut and bolt 8 x 1 pt 25mm x 30mm full thread , nut and bolt 10 x 1mm x 30mm full thread , nut and bolt 10 x 1 pt 5mm x 40mm full thread , nut and bolt 12 x 1 pt 5mm x 60mm full thread , nut and bolt 12 x 1 pt 75mm x 60mm half thread , nut and bolt 12 x 1 pt 75mm x 60mm full thread , nut and bolt 14 x 1 pt 5mm x 100mm half thread , nut and bolt 14 x 2mm x 100mm half thread , nut and bolt 14 x 2mm x 100mm full thread , nut and bolt 16 x 1 pt 5mm x 100mm half thread , nut and bolt 16 x 2mm x 100mm full thread , carbide boring tool 3 oblique 4inch x 12inch tipped bit size ct5b1 , carbide boring tool 1 oblique 4inch x 6inch tipped bit size ct5b1 , hss tool 1 oblique 2 x1 oblique 2 x 6 inch , hss tool 1x1x 6 inch , battery operated electrical screwdriver 12 v li ion 0 to 800 rpm as per specifiation , hydraulic crimping tool 8 ton 6 ot 50 mm 2 capacity c type as per specification , hydraulic crimping tool 12 ton 50 to 400 mm2 capacity c type as per specification , universal bearing puller kit internal oblique external type 20 to 200 mm as per specification , lt wire 0 pt 75mm , lt wire 1 mm , lt wire 2 mm , lt wire 4 mm , hydrometer specific gravity 1 pt 100 to 1 pt 300 as per specification , battery lead 99 pt 97 present purity ingot oblique bar , soldering iron 15 to 25 w 230 v ac conical tip ceramic heating element shock proof handle , push button switch 12 oblique 24 v dc spst momentary 10 a panel mount ip 65 , electric horn 12 v dc dual tone disc type 110 db ip 65 bracket mount , electric horn 24 v dc trumpet type 110 db ip 65 bracket mount , toggle switch on off 12 oblique 24 v dc 10 a panel mount , pull and push switch on off spst 12 oblique 24 v dc 10 a panel mount , parking light 12 v dc led amber ip 65 1 to 5 w screw mount , parking light 24 v dc led amber ip 65 vibration resistant , back light 12 v dc led tail brake indicator reflector ip 65 screw mount , back light 24 v dc led tail brake indicator reflector ip 65 screw mount , pin bulb 2 w 12 v ba9s type suitable for vehicle parking oblique speedometer , connecting pin set male and female brass tin plated 5 to 15 a 12 oblique 24 v dcc with pvc covers , cable clip with nail pvc body with gi nail 4 to 12 mm 100 pcs per packet , lume tape 18 mm x 20 m black pvc self adhesive flame retardant , thimble 2 inch length 17 mm id galvanized steel heavy duty for 16 to 18 mm wire rope , tie clamp nylon 66 comma 200 x 4 pt 08 mm black 18 kg tensile strength self locking 100 pcs per packet , electric tester 100 to 500 v ac neon indicator insulated bfoolddyin1g5s0tempmlaledndgetrh
Agency / Dept :
border road organisation BRO
Due Date :
Sep 02, 2026 (2 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16684449
Location : bhopal , madhya pradesh
Source : GEM Tenders
LIVE TENDER
tender for electricity lab trainer , power factor demonstrator , three phase lab , single phase transformer lab , three phase induction motor lab , home electrical wiring training system , variable frequency drive training system , ac servo motor lab, basic electrical energy lab equipments, dc power supply 5v 200ma ac power supply 6v 1a relay 5v galvanometer 30 0 30 galvanometer resistance 80w light bulbs 6v potentiometers 25w 1w 10kw 1w switch 1 pole 2 way toggle type core types e i u coils no of turns wire dimension maximum current inductance mm amp approximate 200 turn 0.818 1.46 590 mh 400 turn 0.573 0.728 2.3 mh 800 turn 0.404 0.363 9.2 mh 1600 turn 0.251 0.144 34.2 mh 3200 turn 0.170 0.072 134 mh fuse 1a power supply 230v plus minus 10 percent 50hz dimension mm w 345 x d 245 x h 105, mains supply 230v plus minus 10 percent 50hz transformer primary voltage 0 to 230v ac secondary voltage 0 to 115v ac current rating 150ma transformer primary voltage 0 to 230v ac secondary voltage 0 to 9v 15 to 0 to 15v ac current rating 300ma resistance 500w 400w 200w 400w capacitor 12.5 microf 440 or 450v 20microf 440 or 450v inductor 200mh 1a mcb 2a, input three phase mains 230 v phase voltage 415 line voltage 50 hz plus minus 10 percent outputs 18 v phase voltage 28 v line voltage 50 hz plus minus 10 mcb (power switch) three phase input 18 v each phase 50 hz plus minus 10percent loads resistors 1 k 10 k 100 k capacitors 10 uf 100 uf and 1000 uf inductors 5 mh 10 mh 20 mh, mains supply single phase 230v ac plus minus 10percent 50hz single phase transformer rating 1kva primary voltage 0to 125v 0 to 125v secondary voltage 0to 125v 0 to 125v rated current 4a single phase auto transformer primary voltage 230v secondary voltage 0to 270v rated current 5a digital meters used ac voltmeter 450v 2nos. ac ammeter 5a 2nos. wattmeter 1500w mcb sp 6a, mains supply three phase 415v ac plus minus 10percent 50hz drive make siemens input voltage three phase 415v ac plus minus 10percent output frequency range 0 to 599hz default range with resolution of 0.01hz protection class ip20 three phase induction motor type squirrel cage rating 1hp 2 hp and 3 hp also available voltage rating 415v ac speed 1440 rpm plus minus 5percent insulation class b f loading arrangement mechanical brake drum or pulley aluminum casted digital meters used ac voltmeter 450v ac ac ammeter 5a ac mcb tpn 10a ac, mains supply 230v ac plus minus 10percent 50hz energy meter specifications meter constant 1600 impulses per kwh display counter 100 impulses per kwh single phase mcb 6a load specifications tube light 20w 220 to 240v ceiling fan 50w 220to 240v maximum load current 4a, mains supply three phase 415v ac plus minus 10percent 50hz drive make siemens input voltage three phase 415v ac plus minus 10percent output frequency range 0 to 599hz default range with resolution of 0.01hz protection class ip20 three phase induction motor type squirrel cage rating 1hp 2 hp and 3 hp also available voltage rating 415v ac speed 1440 rpm plus minus 5percent insulation class b f loading arrangement mechanical brake drum or pulley aluminum casted digital meters used ac voltmeter 450v ac ac ammeter 5a ac mcb tpn 10a ac, ac servo motor 1 no. power 400w rated voltage 220v rated speed 0 to 3000 r per min. current 1.0 ampere control type pwm control using drive encoder 2048 2500 10000 pulse per rev. inc remental absolute dynamic brake servo or controller off operable with the builtto in alarm activated servo drive system 1 no. led display 5 digit seven segment display function key 5 nos. mode shift up down set io interface port 1 no
Agency / Dept :
micro small and medium enterprises MSME
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16742597
Location : chinsurah magra , west bengal
Source : GEM Tenders
LIVE TENDER
tender for all geared , starter motor axial type pre engagement type and construction of axial type , storage type water cooler hot and cold , telescopic alidade , three four door refrigerator inverter type , thyristor igbt controlled vvvf ac motor drive with control panel , tinnmans shear , total station , transit theodolite with stand with all accessories , turbocharger cut sectional view , ultrasonic injection cleaning equipment , universal tool and cutter grinder , vrf vrv ac unit , water cooled induction welding brazing machine. , water cooler storage type , water dispenser bubble type hot and cold , water pump for dismantling and assembling , wireless communication modules for interfacing with microcontrollers rfid card reader finger print zigbee gps gsm bluetooth wifi , working condition of diesel engine crdi 4 stroke engine assembly with fault simulation board , working condition of ev electric vehicle car , apparatus for measurement of thermal conductivity of good and bad conductors , air blow gun with standard accessories , air ratchet with standard accessories , analog component trainer , angle truing attachment for surface grinding machine , apparatus for measurement of coefficient of expansion thermal of solid and liquid , apparatus for measurement of construction of efficient of expansionthermal of solid pulinger s apparatus , automatic reverse forward starter , autotransformer , belt tensioner gauge , bench lever shears , bench vice , binocular , boiling point and melting point apnaratus , bourdon tube c type pressure gauge , box sextant , cable straight jointing kit , calculator scientific non programmable , capsule type pressure gauge , cell phone power source with charger chords for different cell phones , chromatographic equipment , compression testing gauge suitable for diesel engine with standard accessories , computing scales five hectares , computing scales two hectares , condenser for distillation lebig , cork press , dc regulated variable programmable dc power supply , digital viscometer , digital and analog bread board trainer , digital balance 200 gm , digital balance 10 kg , digital ic tester , digital ic trainer , digital micrometer outside , dimmer starter , discrete component trainer basic electronics trainer , dmx controller , dual dc regulated power supply , dusk and dawn switch , electro magnetic relay with control panel a cut out relays b over current c under voltage , engineers stethoscope , ev charger home 1 phase input , ev charge, 3 phase input , fibre glass tape , fuel injection pump dismantling tool kit universal vice , fuel injection pump ve pump distributor fuel rotary pump dpc pumps along with special tools and accessories , growler armature , gunter s chain , hand reamers adjustable , height indicators , hollow punch set of seven pieces , hydraulic crimping tool for ug cable crimping with bits , hydraulic jack hi lift type 3 ton capacity and 5 ton capacity , impulse relay , indexing head with motorized for tool and cutter grinding machine , injector cleaning unit , injector testing set hand tester , insulators including hardware fitting , inverter with battery , land measuring chain , lcd based dpm , lcr meter digital handheld , leveling staff , levelling staff , liquid penetrate inspection kit , machine vice , magnet bar for magnetizing through compass needles , magnetic flux meter , metal cross staff box type , mppt based charge controller , multi scan tool with oscilloscope , multiangle magnetic clamp set , offset rod , oil pump for dismantling and assembling , pen knife , ph meter digital ,, workshop outfit, as per specification
Agency / Dept :
department of industrial training
Due Date :
Sep 08, 2026 (8 days left)
Tender Value :
2.42Cr
View Documents
T18 Ref No : 16215012
Location : namakkal , tamil nadu
corrigendum tender for to carry out design supply erection and commissioning of micro processor based digital dc drive panel, design supply erection and commissioning of micro processor based digital dc drive panel
Agency / Dept :
tamil nadu cooperative sugar federation limited
Due Date :
Jul 17, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16301318
Location : namakkal , tamil nadu
corrigendum tender for to carry out design supply erection and commissioning of micro processor based digital dc drive panel, design supply erection and commissioning of micro processor based digital dc drive panel
Agency / Dept :
tamil nadu cooperative sugar federation limited
Due Date :
Jul 22, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Digital Dc Drive. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Digital Dc Drive sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Digital Dc Drive Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Digital Dc Drive, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Digital Dc Drive Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Digital Dc Drive Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Digital Dc Drive.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Digital Dc Drive depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Digital Dc Drive Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Digital Dc Drive bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Digital Dc Drive. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Digital Dc Drive, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Digital Dc Drive, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Digital Dc Drive?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Digital Dc Drive tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Digital Dc Drive?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Digital Dc Drive, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Digital Dc Drive is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All