tender for dismantling and shifting of the existing 7.5 kva ea set , dismantling and shifting of the existing 15 and 20 kva ea set , dismantling and shifting of the existing 30 kva ea set , providing and laying plain cement concrete , providing and fixing 25 mm x 3 mm g.i. strip on surface or in recess for connections etc. as required. , supplying and laying of ug cable of 1.1 kv , providing and laying 16 sq mm pvc insulated frls earthing cable green including providing necessary copper sockets as required , supplying and making end terminations , providing maintenance free earthing arrangement , supply and installation 8 swg gi wire for loop earthing , earthing with g.i. eatrth pipe 1.5mtr long by hammering of 40 mm dia including accessories as required. , supply installation testing and commissioning of 63 a , 4 pole on load change over switch , dismantling of existing canopy of 7 5 15 20 and 30 kva ea sets , supplying and fixing 50 mm dia class b ms pipes for the exhaust system of the ea set , supplying and fixing 40 mm dia a class gi pipe for cable protection and silencer support including necessary supports painting welding if required etc as required , painting of ea set with one coat of zinchromate primer and two coats of enamel paint after removing rust and dust ,cleaning etc complete as required , supplying and laying 20 mm dia class c ms pipe, shifting of dg sets in kollam ba, dismantling and shifting of the existing 7.5 kva ea testing the ea set making good the damages to the foundation etc. as required., dismantling & shifting of the existing 15/20 kva ea set with acoustic enclosure from various bts with all accessories to a location within the ba as directed by the authority concerned incharge loading ,transportation,unloading leading to position and itc of the shifted 15 kva ea set with enclosure in the existing foundation at the new station, connections with the existing power and earth cables/strips, testing the ea set making good the damages to the foundation etc. as required., dismantling & shifting of the existing 30 kva ea set with acoustic enclosure from various bts with all accessories to a location within the ba as directed by the authority concerned incharge loading ,transportation,unloading leading to position and itc of the shifted 15 kva ea set with enclosure in the existing foundation at the new station, connections with the existing power and earth cables/strips, testing the ea set making good the damages to the foundation etc. as required., providing and laying plain cement concrete in the ratio of 1 is to 2 is to 4 using one part cement two parts coarse m sand and four parts graded stone aggregate of 20 mm nominal size in the foundation of dg set including excavation dressing ramming disposal of surplus soil shuttering work and providing 15 mm thick cement plaster in the ratio of 1 is to 4 using one part cement and four parts fine m sand., providing and fixing 25 mm x 3 mm g.i. strip on surface or in recess for connections etc. as required., supplying and laying of 4c 16 sq.mm pvc insulated and pvc sheathed / xlpe aluminium conductor ug cable of 1.1 kv grade direct in ground/ in pipe/ on surface of wall/ loose in panel as required., providing and laying 16 sq mm pvc insulated frls earthing cable green including providing necessary copper sockets as required, supplying and making end terminations with brass compression gland and aluminium lugs for the following sizes of pvc sheathed / xlpe luminium conductor ug cable of 1.1 kv grade as required----4c 16 sq.mm, providing maintenance free earthing arrangement with copper coated solid steel rod of 20 mm dia and 3m length, copper coated connectors and fasteners for connecting electrodes with earthing conductor/ strip i/c supplying and filling 8 kg. earth enhancing mineral compound. the electrodes shall be hand driven or hammered into the earth., s/d 8 swg gi wire for loop earthing in the existing surface/ recessed cable as reqd., earthing with g.i. eatrth pipe 1.5mtr long by hammering of 40 mm dia including accessories as required., sitcof 63 a , 4 pole on load change over switch suitable for 415 volt, 50 hz ac supply in sheet steel enclosure , fixing the same on wall with suitable nut bolts, connections, testing, commissioning etc. as required, dismantling the existing canopy of 7.5/15/20/30 kva ea set, manually loading all the dismantled parts of accoustic insulation, and control panel etc with out any damage, re-assembling the e/a set canopy ,engine, alternator, control panel with all accessories complete as required, supplying and fixing 50 mm dia class b ms pipes for the exhaust system of the ea set including providing suitable bends reducers coarse wire mesh cutting welding heat resistant painting etc as required, supplying and fixing 40 mm dia a class gi pipe for cable protection and silencer support including necessary supports painting welding if required etc as required, painting of 15/30 kva ea set with one coat of zinchromate primer and two coats of enamel paint after removing rust and dust ,cleaning etc complete as required, supplying and laying 20 mm dia class c ms pipe in recess/surface for fuel line i/c cutting, welding, painting, supplying and fixing accessories,plastering etc. as required

You can fill out the integrated inquiry form below on this detail page to share your company profile. Our consultancy desk will review your query regarding supply and installation,loading transportation,aluminium conductor,change over switch,acoustic enclosure,earthing conductor,end terminations,cement concrete,steel enclosure,earthing cable,exhaust system,aluminium lugs,control panel,enamel paint,dismantling,hand driven,sheet steel,unloading,steel rod,nut bolts,wire mesh,ug cable,ms pipes,cleaning,gi wire,gi pipe,ms pipe,dg sets,dg set,bolts parameters and guide you on how to coordinate efficiently with the procurement team of Bharat Sanchar Nigam Limited BSNL

Tender18 provides end-to-end professional bidding support and documentation advisory for Tender For Dismantling And Shifting Of The Existing 7.5 Kva Ea Set , Dismantling And Shifting Of The Existing 15 And 20 Kva Ea Set , Dismantling And Shifting Of The Existing 30 Kva Ea Set , Providing And Laying Plain Cement Concrete , Providing And Fixing 25 Mm X 3 Mm G.i. Strip On Surface Or In Recess For Connections Etc. As Required. , Supplying And Laying Of Ug Cable Of 1.1 Kv , Providing And Laying 16 Sq Mm Pvc Insulated Frls Earthing Cable Green Including Providing Necessary Copper Sockets As Required , Supplying And Making End Terminations , Providing Maintenance Free Earthing Arrangement , Supply And Installation 8 Swg Gi Wire For Loop Earthing , Earthing With G.i. Eatrth Pipe 1.5mtr Long By Hammering Of 40 Mm Dia Including Accessories As Required. , Supply Installation Testing And Commissioning Of 63 A , 4 Pole On Load Change Over Switch , Dismantling Of Existing Canopy Of 7 5 15 20 And 30 Kva Ea Sets , Supplying And Fixing 50 Mm Dia Class B Ms Pipes For The Exhaust System Of The Ea Set , Supplying And Fixing 40 Mm Dia A Class Gi Pipe For Cable Protection And Silencer Support Including Necessary Supports Painting Welding If Required Etc As Required , Painting Of Ea Set With One Coat Of Zinchromate Primer And Two Coats Of Enamel Paint After Removing Rust And Dust ,cleaning Etc Complete As Required , Supplying And Laying 20 Mm Dia Class C Ms Pipe, Shifting Of Dg Sets In Kollam Ba, Dismantling And Shifting Of The Existing 7.5 Kva Ea Testing The Ea Set Making Good The Damages To The Foundation Etc. As Required., Dismantling & Shifting Of The Existing 15/20 Kva Ea Set With Acoustic Enclosure From Various Bts With All Accessories To A Location Within The Ba As Directed By The Authority Concerned Incharge Loading ,transportation,unloading Leading To Position And Itc Of The Shifted 15 Kva Ea Set With Enclosure In The Existing Foundation At The New Station, Connections With The Existing Power And Earth Cables/strips, Testing The Ea Set Making Good The Damages To The Foundation Etc. As Required., Dismantling & Shifting Of The Existing 30 Kva Ea Set With Acoustic Enclosure From Various Bts With All Accessories To A Location Within The Ba As Directed By The Authority Concerned Incharge Loading ,transportation,unloading Leading To Position And Itc Of The Shifted 15 Kva Ea Set With Enclosure In The Existing Foundation At The New Station, Connections With The Existing Power And Earth Cables/strips, Testing The Ea Set Making Good The Damages To The Foundation Etc. As Required., Providing And Laying Plain Cement Concrete In The Ratio Of 1 Is To 2 Is To 4 Using One Part Cement Two Parts Coarse M Sand And Four Parts Graded Stone Aggregate Of 20 Mm Nominal Size In The Foundation Of Dg Set Including Excavation Dressing Ramming Disposal Of Surplus Soil Shuttering Work And Providing 15 Mm Thick Cement Plaster In The Ratio Of 1 Is To 4 Using One Part Cement And Four Parts Fine M Sand., Providing And Fixing 25 Mm X 3 Mm G.i. Strip On Surface Or In Recess For Connections Etc. As Required., Supplying And Laying Of 4c 16 Sq.mm Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Ug Cable Of 1.1 Kv Grade Direct In Ground/ In Pipe/ On Surface Of Wall/ Loose In Panel As Required., Providing And Laying 16 Sq Mm Pvc Insulated Frls Earthing Cable Green Including Providing Necessary Copper Sockets As Required, Supplying And Making End Terminations With Brass Compression Gland And Aluminium Lugs For The Following Sizes Of Pvc Sheathed / Xlpe Luminium Conductor Ug Cable Of 1.1 Kv Grade As Required----4c 16 Sq.mm, Providing Maintenance Free Earthing Arrangement With Copper Coated Solid Steel Rod Of 20 Mm Dia And 3m Length, Copper Coated Connectors And Fasteners For Connecting Electrodes With Earthing Conductor/ Strip I/c Supplying And Filling 8 Kg. Earth Enhancing Mineral Compound. The Electrodes Shall Be Hand Driven Or Hammered Into The Earth., S/d 8 Swg Gi Wire For Loop Earthing In The Existing Surface/ Recessed Cable As Reqd., Earthing With G.i. Eatrth Pipe 1.5mtr Long By Hammering Of 40 Mm Dia Including Accessories As Required., Sitcof 63 A , 4 Pole On Load Change Over Switch Suitable For 415 Volt, 50 Hz Ac Supply In Sheet Steel Enclosure , Fixing The Same On Wall With Suitable Nut Bolts, Connections, Testing, Commissioning Etc. As Required, Dismantling The Existing Canopy Of 7.5/15/20/30 Kva Ea Set, Manually Loading All The Dismantled Parts Of Accoustic Insulation, And Control Panel Etc With Out Any Damage, Re-assembling The E/a Set Canopy ,engine, Alternator, Control Panel With All Accessories Complete As Required, Supplying And Fixing 50 Mm Dia Class B Ms Pipes For The Exhaust System Of The Ea Set Including Providing Suitable Bends Reducers Coarse Wire Mesh Cutting Welding Heat Resistant Painting Etc As Required, Supplying And Fixing 40 Mm Dia A Class Gi Pipe For Cable Protection And Silencer Support Including Necessary Supports Painting Welding If Required Etc As Required, Painting Of 15/30 Kva Ea Set With One Coat Of Zinchromate Primer And Two Coats Of Enamel Paint After Removing Rust And Dust ,cleaning Etc Complete As Required, Supplying And Laying 20 Mm Dia Class C Ms Pipe In Recess/surface For Fuel Line I/c Cutting, Welding, Painting, Supplying And Fixing Accessories,plastering Etc. As Required . Our senior analysts help you decode the complete project guidelines, manage accurate costing sheets, and complete error-free submissions on the official platform used by Bharat Sanchar Nigam Limited BSNL.

Most online bids face rejection during the initial evaluation round due to avoidable errors like uploading blurred document scans, submitting expired DSCs, or missing critical experience papers required for Tender For Dismantling And Shifting Of The Existing 7.5 Kva Ea Set , Dismantling And Shifting Of The Existing 15 And 20 Kva Ea Set , Dismantling And Shifting Of The Existing 30 Kva Ea Set , Providing And Laying Plain Cement Concrete , Providing And Fixing 25 Mm X 3 Mm G.i. Strip On Surface Or In Recess For Connections Etc. As Required. , Supplying And Laying Of Ug Cable Of 1.1 Kv , Providing And Laying 16 Sq Mm Pvc Insulated Frls Earthing Cable Green Including Providing Necessary Copper Sockets As Required , Supplying And Making End Terminations , Providing Maintenance Free Earthing Arrangement , Supply And Installation 8 Swg Gi Wire For Loop Earthing , Earthing With G.i. Eatrth Pipe 1.5mtr Long By Hammering Of 40 Mm Dia Including Accessories As Required. , Supply Installation Testing And Commissioning Of 63 A , 4 Pole On Load Change Over Switch , Dismantling Of Existing Canopy Of 7 5 15 20 And 30 Kva Ea Sets , Supplying And Fixing 50 Mm Dia Class B Ms Pipes For The Exhaust System Of The Ea Set , Supplying And Fixing 40 Mm Dia A Class Gi Pipe For Cable Protection And Silencer Support Including Necessary Supports Painting Welding If Required Etc As Required , Painting Of Ea Set With One Coat Of Zinchromate Primer And Two Coats Of Enamel Paint After Removing Rust And Dust ,cleaning Etc Complete As Required , Supplying And Laying 20 Mm Dia Class C Ms Pipe, Shifting Of Dg Sets In Kollam Ba, Dismantling And Shifting Of The Existing 7.5 Kva Ea Testing The Ea Set Making Good The Damages To The Foundation Etc. As Required., Dismantling & Shifting Of The Existing 15/20 Kva Ea Set With Acoustic Enclosure From Various Bts With All Accessories To A Location Within The Ba As Directed By The Authority Concerned Incharge Loading ,transportation,unloading Leading To Position And Itc Of The Shifted 15 Kva Ea Set With Enclosure In The Existing Foundation At The New Station, Connections With The Existing Power And Earth Cables/strips, Testing The Ea Set Making Good The Damages To The Foundation Etc. As Required., Dismantling & Shifting Of The Existing 30 Kva Ea Set With Acoustic Enclosure From Various Bts With All Accessories To A Location Within The Ba As Directed By The Authority Concerned Incharge Loading ,transportation,unloading Leading To Position And Itc Of The Shifted 15 Kva Ea Set With Enclosure In The Existing Foundation At The New Station, Connections With The Existing Power And Earth Cables/strips, Testing The Ea Set Making Good The Damages To The Foundation Etc. As Required., Providing And Laying Plain Cement Concrete In The Ratio Of 1 Is To 2 Is To 4 Using One Part Cement Two Parts Coarse M Sand And Four Parts Graded Stone Aggregate Of 20 Mm Nominal Size In The Foundation Of Dg Set Including Excavation Dressing Ramming Disposal Of Surplus Soil Shuttering Work And Providing 15 Mm Thick Cement Plaster In The Ratio Of 1 Is To 4 Using One Part Cement And Four Parts Fine M Sand., Providing And Fixing 25 Mm X 3 Mm G.i. Strip On Surface Or In Recess For Connections Etc. As Required., Supplying And Laying Of 4c 16 Sq.mm Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Ug Cable Of 1.1 Kv Grade Direct In Ground/ In Pipe/ On Surface Of Wall/ Loose In Panel As Required., Providing And Laying 16 Sq Mm Pvc Insulated Frls Earthing Cable Green Including Providing Necessary Copper Sockets As Required, Supplying And Making End Terminations With Brass Compression Gland And Aluminium Lugs For The Following Sizes Of Pvc Sheathed / Xlpe Luminium Conductor Ug Cable Of 1.1 Kv Grade As Required----4c 16 Sq.mm, Providing Maintenance Free Earthing Arrangement With Copper Coated Solid Steel Rod Of 20 Mm Dia And 3m Length, Copper Coated Connectors And Fasteners For Connecting Electrodes With Earthing Conductor/ Strip I/c Supplying And Filling 8 Kg. Earth Enhancing Mineral Compound. The Electrodes Shall Be Hand Driven Or Hammered Into The Earth., S/d 8 Swg Gi Wire For Loop Earthing In The Existing Surface/ Recessed Cable As Reqd., Earthing With G.i. Eatrth Pipe 1.5mtr Long By Hammering Of 40 Mm Dia Including Accessories As Required., Sitcof 63 A , 4 Pole On Load Change Over Switch Suitable For 415 Volt, 50 Hz Ac Supply In Sheet Steel Enclosure , Fixing The Same On Wall With Suitable Nut Bolts, Connections, Testing, Commissioning Etc. As Required, Dismantling The Existing Canopy Of 7.5/15/20/30 Kva Ea Set, Manually Loading All The Dismantled Parts Of Accoustic Insulation, And Control Panel Etc With Out Any Damage, Re-assembling The E/a Set Canopy ,engine, Alternator, Control Panel With All Accessories Complete As Required, Supplying And Fixing 50 Mm Dia Class B Ms Pipes For The Exhaust System Of The Ea Set Including Providing Suitable Bends Reducers Coarse Wire Mesh Cutting Welding Heat Resistant Painting Etc As Required, Supplying And Fixing 40 Mm Dia A Class Gi Pipe For Cable Protection And Silencer Support Including Necessary Supports Painting Welding If Required Etc As Required, Painting Of 15/30 Kva Ea Set With One Coat Of Zinchromate Primer And Two Coats Of Enamel Paint After Removing Rust And Dust ,cleaning Etc Complete As Required, Supplying And Laying 20 Mm Dia Class C Ms Pipe In Recess/surface For Fuel Line I/c Cutting, Welding, Painting, Supplying And Fixing Accessories,plastering Etc. As Required in Kerala.

Eligibility for outstation bidders depends entirely on the terms set inside the document for Tender For Dismantling And Shifting Of The Existing 7.5 Kva Ea Set , Dismantling And Shifting Of The Existing 15 And 20 Kva Ea Set , Dismantling And Shifting Of The Existing 30 Kva Ea Set , Providing And Laying Plain Cement Concrete , Providing And Fixing 25 Mm X 3 Mm G.i. Strip On Surface Or In Recess For Connections Etc. As Required. , Supplying And Laying Of Ug Cable Of 1.1 Kv , Providing And Laying 16 Sq Mm Pvc Insulated Frls Earthing Cable Green Including Providing Necessary Copper Sockets As Required , Supplying And Making End Terminations , Providing Maintenance Free Earthing Arrangement , Supply And Installation 8 Swg Gi Wire For Loop Earthing , Earthing With G.i. Eatrth Pipe 1.5mtr Long By Hammering Of 40 Mm Dia Including Accessories As Required. , Supply Installation Testing And Commissioning Of 63 A , 4 Pole On Load Change Over Switch , Dismantling Of Existing Canopy Of 7 5 15 20 And 30 Kva Ea Sets , Supplying And Fixing 50 Mm Dia Class B Ms Pipes For The Exhaust System Of The Ea Set , Supplying And Fixing 40 Mm Dia A Class Gi Pipe For Cable Protection And Silencer Support Including Necessary Supports Painting Welding If Required Etc As Required , Painting Of Ea Set With One Coat Of Zinchromate Primer And Two Coats Of Enamel Paint After Removing Rust And Dust ,cleaning Etc Complete As Required , Supplying And Laying 20 Mm Dia Class C Ms Pipe, Shifting Of Dg Sets In Kollam Ba, Dismantling And Shifting Of The Existing 7.5 Kva Ea Testing The Ea Set Making Good The Damages To The Foundation Etc. As Required., Dismantling & Shifting Of The Existing 15/20 Kva Ea Set With Acoustic Enclosure From Various Bts With All Accessories To A Location Within The Ba As Directed By The Authority Concerned Incharge Loading ,transportation,unloading Leading To Position And Itc Of The Shifted 15 Kva Ea Set With Enclosure In The Existing Foundation At The New Station, Connections With The Existing Power And Earth Cables/strips, Testing The Ea Set Making Good The Damages To The Foundation Etc. As Required., Dismantling & Shifting Of The Existing 30 Kva Ea Set With Acoustic Enclosure From Various Bts With All Accessories To A Location Within The Ba As Directed By The Authority Concerned Incharge Loading ,transportation,unloading Leading To Position And Itc Of The Shifted 15 Kva Ea Set With Enclosure In The Existing Foundation At The New Station, Connections With The Existing Power And Earth Cables/strips, Testing The Ea Set Making Good The Damages To The Foundation Etc. As Required., Providing And Laying Plain Cement Concrete In The Ratio Of 1 Is To 2 Is To 4 Using One Part Cement Two Parts Coarse M Sand And Four Parts Graded Stone Aggregate Of 20 Mm Nominal Size In The Foundation Of Dg Set Including Excavation Dressing Ramming Disposal Of Surplus Soil Shuttering Work And Providing 15 Mm Thick Cement Plaster In The Ratio Of 1 Is To 4 Using One Part Cement And Four Parts Fine M Sand., Providing And Fixing 25 Mm X 3 Mm G.i. Strip On Surface Or In Recess For Connections Etc. As Required., Supplying And Laying Of 4c 16 Sq.mm Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Ug Cable Of 1.1 Kv Grade Direct In Ground/ In Pipe/ On Surface Of Wall/ Loose In Panel As Required., Providing And Laying 16 Sq Mm Pvc Insulated Frls Earthing Cable Green Including Providing Necessary Copper Sockets As Required, Supplying And Making End Terminations With Brass Compression Gland And Aluminium Lugs For The Following Sizes Of Pvc Sheathed / Xlpe Luminium Conductor Ug Cable Of 1.1 Kv Grade As Required----4c 16 Sq.mm, Providing Maintenance Free Earthing Arrangement With Copper Coated Solid Steel Rod Of 20 Mm Dia And 3m Length, Copper Coated Connectors And Fasteners For Connecting Electrodes With Earthing Conductor/ Strip I/c Supplying And Filling 8 Kg. Earth Enhancing Mineral Compound. The Electrodes Shall Be Hand Driven Or Hammered Into The Earth., S/d 8 Swg Gi Wire For Loop Earthing In The Existing Surface/ Recessed Cable As Reqd., Earthing With G.i. Eatrth Pipe 1.5mtr Long By Hammering Of 40 Mm Dia Including Accessories As Required., Sitcof 63 A , 4 Pole On Load Change Over Switch Suitable For 415 Volt, 50 Hz Ac Supply In Sheet Steel Enclosure , Fixing The Same On Wall With Suitable Nut Bolts, Connections, Testing, Commissioning Etc. As Required, Dismantling The Existing Canopy Of 7.5/15/20/30 Kva Ea Set, Manually Loading All The Dismantled Parts Of Accoustic Insulation, And Control Panel Etc With Out Any Damage, Re-assembling The E/a Set Canopy ,engine, Alternator, Control Panel With All Accessories Complete As Required, Supplying And Fixing 50 Mm Dia Class B Ms Pipes For The Exhaust System Of The Ea Set Including Providing Suitable Bends Reducers Coarse Wire Mesh Cutting Welding Heat Resistant Painting Etc As Required, Supplying And Fixing 40 Mm Dia A Class Gi Pipe For Cable Protection And Silencer Support Including Necessary Supports Painting Welding If Required Etc As Required, Painting Of 15/30 Kva Ea Set With One Coat Of Zinchromate Primer And Two Coats Of Enamel Paint After Removing Rust And Dust ,cleaning Etc Complete As Required, Supplying And Laying 20 Mm Dia Class C Ms Pipe In Recess/surface For Fuel Line I/c Cutting, Welding, Painting, Supplying And Fixing Accessories,plastering Etc. As Required. While many public sector projects allow national competitive bidding, certain localized works require local offices or specific registration metrics in Kollam.

If this procurement is routed through the central marketplace, an active GeM Seller ID is mandatory to supply supply and installation,loading transportation,aluminium conductor,change over switch,acoustic enclosure,earthing conductor,end terminations,cement concrete,steel enclosure,earthing cable,exhaust system,aluminium lugs,control panel,enamel paint,dismantling,hand driven,sheet steel,unloading,steel rod,nut bolts,wire mesh,ug cable,ms pipes,cleaning,gi wire,gi pipe,ms pipe,dg sets,dg set,bolts items. Tender18 offers complete assistance for brand cataloging, profile creation, and vendor assessment required officially by Bharat Sanchar Nigam Limited BSNL

To register an eligible bid for these supply and installation,loading transportation,aluminium conductor,change over switch,acoustic enclosure,earthing conductor,end terminations,cement concrete,steel enclosure,earthing cable,exhaust system,aluminium lugs,control panel,enamel paint,dismantling,hand driven,sheet steel,unloading,steel rod,nut bolts,wire mesh,ug cable,ms pipes,cleaning,gi wire,gi pipe,ms pipe,dg sets,dg set,bolts contracts, companies must prepare their core compliance documents. Vendors operating across Kerala must ensure they possess a valid GST registration, permanent account number (PAN), and active Class-3 Digital Signature Certificates.

This public procurement cycle is specifically looking for qualified vendors and suppliers who can provide high-quality supply and installation,loading transportation,aluminium conductor,change over switch,acoustic enclosure,earthing conductor,end terminations,cement concrete,steel enclosure,earthing cable,exhaust system,aluminium lugs,control panel,enamel paint,dismantling,hand driven,sheet steel,unloading,steel rod,nut bolts,wire mesh,ug cable,ms pipes,cleaning,gi wire,gi pipe,ms pipe,dg sets,dg set,bolts solutions. The operational execution, delivery, and deployment of these materials must be managed locally within the Kollam region.

The estimated project cost and budget thresholds can be reviewed directly inside the tender document. Bidders can analyze these qualification files to check if their firm meets the financial capability criteria specified for Tender For Dismantling And Shifting Of The Existing 7.5 Kva Ea Set , Dismantling And Shifting Of The Existing 15 And 20 Kva Ea Set , Dismantling And Shifting Of The Existing 30 Kva Ea Set , Providing And Laying Plain Cement Concrete , Providing And Fixing 25 Mm X 3 Mm G.i. Strip On Surface Or In Recess For Connections Etc. As Required. , Supplying And Laying Of Ug Cable Of 1.1 Kv , Providing And Laying 16 Sq Mm Pvc Insulated Frls Earthing Cable Green Including Providing Necessary Copper Sockets As Required , Supplying And Making End Terminations , Providing Maintenance Free Earthing Arrangement , Supply And Installation 8 Swg Gi Wire For Loop Earthing , Earthing With G.i. Eatrth Pipe 1.5mtr Long By Hammering Of 40 Mm Dia Including Accessories As Required. , Supply Installation Testing And Commissioning Of 63 A , 4 Pole On Load Change Over Switch , Dismantling Of Existing Canopy Of 7 5 15 20 And 30 Kva Ea Sets , Supplying And Fixing 50 Mm Dia Class B Ms Pipes For The Exhaust System Of The Ea Set , Supplying And Fixing 40 Mm Dia A Class Gi Pipe For Cable Protection And Silencer Support Including Necessary Supports Painting Welding If Required Etc As Required , Painting Of Ea Set With One Coat Of Zinchromate Primer And Two Coats Of Enamel Paint After Removing Rust And Dust ,cleaning Etc Complete As Required , Supplying And Laying 20 Mm Dia Class C Ms Pipe, Shifting Of Dg Sets In Kollam Ba, Dismantling And Shifting Of The Existing 7.5 Kva Ea Testing The Ea Set Making Good The Damages To The Foundation Etc. As Required., Dismantling & Shifting Of The Existing 15/20 Kva Ea Set With Acoustic Enclosure From Various Bts With All Accessories To A Location Within The Ba As Directed By The Authority Concerned Incharge Loading ,transportation,unloading Leading To Position And Itc Of The Shifted 15 Kva Ea Set With Enclosure In The Existing Foundation At The New Station, Connections With The Existing Power And Earth Cables/strips, Testing The Ea Set Making Good The Damages To The Foundation Etc. As Required., Dismantling & Shifting Of The Existing 30 Kva Ea Set With Acoustic Enclosure From Various Bts With All Accessories To A Location Within The Ba As Directed By The Authority Concerned Incharge Loading ,transportation,unloading Leading To Position And Itc Of The Shifted 15 Kva Ea Set With Enclosure In The Existing Foundation At The New Station, Connections With The Existing Power And Earth Cables/strips, Testing The Ea Set Making Good The Damages To The Foundation Etc. As Required., Providing And Laying Plain Cement Concrete In The Ratio Of 1 Is To 2 Is To 4 Using One Part Cement Two Parts Coarse M Sand And Four Parts Graded Stone Aggregate Of 20 Mm Nominal Size In The Foundation Of Dg Set Including Excavation Dressing Ramming Disposal Of Surplus Soil Shuttering Work And Providing 15 Mm Thick Cement Plaster In The Ratio Of 1 Is To 4 Using One Part Cement And Four Parts Fine M Sand., Providing And Fixing 25 Mm X 3 Mm G.i. Strip On Surface Or In Recess For Connections Etc. As Required., Supplying And Laying Of 4c 16 Sq.mm Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Ug Cable Of 1.1 Kv Grade Direct In Ground/ In Pipe/ On Surface Of Wall/ Loose In Panel As Required., Providing And Laying 16 Sq Mm Pvc Insulated Frls Earthing Cable Green Including Providing Necessary Copper Sockets As Required, Supplying And Making End Terminations With Brass Compression Gland And Aluminium Lugs For The Following Sizes Of Pvc Sheathed / Xlpe Luminium Conductor Ug Cable Of 1.1 Kv Grade As Required----4c 16 Sq.mm, Providing Maintenance Free Earthing Arrangement With Copper Coated Solid Steel Rod Of 20 Mm Dia And 3m Length, Copper Coated Connectors And Fasteners For Connecting Electrodes With Earthing Conductor/ Strip I/c Supplying And Filling 8 Kg. Earth Enhancing Mineral Compound. The Electrodes Shall Be Hand Driven Or Hammered Into The Earth., S/d 8 Swg Gi Wire For Loop Earthing In The Existing Surface/ Recessed Cable As Reqd., Earthing With G.i. Eatrth Pipe 1.5mtr Long By Hammering Of 40 Mm Dia Including Accessories As Required., Sitcof 63 A , 4 Pole On Load Change Over Switch Suitable For 415 Volt, 50 Hz Ac Supply In Sheet Steel Enclosure , Fixing The Same On Wall With Suitable Nut Bolts, Connections, Testing, Commissioning Etc. As Required, Dismantling The Existing Canopy Of 7.5/15/20/30 Kva Ea Set, Manually Loading All The Dismantled Parts Of Accoustic Insulation, And Control Panel Etc With Out Any Damage, Re-assembling The E/a Set Canopy ,engine, Alternator, Control Panel With All Accessories Complete As Required, Supplying And Fixing 50 Mm Dia Class B Ms Pipes For The Exhaust System Of The Ea Set Including Providing Suitable Bends Reducers Coarse Wire Mesh Cutting Welding Heat Resistant Painting Etc As Required, Supplying And Fixing 40 Mm Dia A Class Gi Pipe For Cable Protection And Silencer Support Including Necessary Supports Painting Welding If Required Etc As Required, Painting Of 15/30 Kva Ea Set With One Coat Of Zinchromate Primer And Two Coats Of Enamel Paint After Removing Rust And Dust ,cleaning Etc Complete As Required, Supplying And Laying 20 Mm Dia Class C Ms Pipe In Recess/surface For Fuel Line I/c Cutting, Welding, Painting, Supplying And Fixing Accessories,plastering Etc. As Required by Bharat Sanchar Nigam Limited BSNL

You can download the commercial Bill of Quantities (BOQ) spreadsheet directly using the secure link provided on this page. The BOQ file contains the item descriptions and rate filling forms officially validated for Tender For Dismantling And Shifting Of The Existing 7.5 Kva Ea Set , Dismantling And Shifting Of The Existing 15 And 20 Kva Ea Set , Dismantling And Shifting Of The Existing 30 Kva Ea Set , Providing And Laying Plain Cement Concrete , Providing And Fixing 25 Mm X 3 Mm G.i. Strip On Surface Or In Recess For Connections Etc. As Required. , Supplying And Laying Of Ug Cable Of 1.1 Kv , Providing And Laying 16 Sq Mm Pvc Insulated Frls Earthing Cable Green Including Providing Necessary Copper Sockets As Required , Supplying And Making End Terminations , Providing Maintenance Free Earthing Arrangement , Supply And Installation 8 Swg Gi Wire For Loop Earthing , Earthing With G.i. Eatrth Pipe 1.5mtr Long By Hammering Of 40 Mm Dia Including Accessories As Required. , Supply Installation Testing And Commissioning Of 63 A , 4 Pole On Load Change Over Switch , Dismantling Of Existing Canopy Of 7 5 15 20 And 30 Kva Ea Sets , Supplying And Fixing 50 Mm Dia Class B Ms Pipes For The Exhaust System Of The Ea Set , Supplying And Fixing 40 Mm Dia A Class Gi Pipe For Cable Protection And Silencer Support Including Necessary Supports Painting Welding If Required Etc As Required , Painting Of Ea Set With One Coat Of Zinchromate Primer And Two Coats Of Enamel Paint After Removing Rust And Dust ,cleaning Etc Complete As Required , Supplying And Laying 20 Mm Dia Class C Ms Pipe, Shifting Of Dg Sets In Kollam Ba, Dismantling And Shifting Of The Existing 7.5 Kva Ea Testing The Ea Set Making Good The Damages To The Foundation Etc. As Required., Dismantling & Shifting Of The Existing 15/20 Kva Ea Set With Acoustic Enclosure From Various Bts With All Accessories To A Location Within The Ba As Directed By The Authority Concerned Incharge Loading ,transportation,unloading Leading To Position And Itc Of The Shifted 15 Kva Ea Set With Enclosure In The Existing Foundation At The New Station, Connections With The Existing Power And Earth Cables/strips, Testing The Ea Set Making Good The Damages To The Foundation Etc. As Required., Dismantling & Shifting Of The Existing 30 Kva Ea Set With Acoustic Enclosure From Various Bts With All Accessories To A Location Within The Ba As Directed By The Authority Concerned Incharge Loading ,transportation,unloading Leading To Position And Itc Of The Shifted 15 Kva Ea Set With Enclosure In The Existing Foundation At The New Station, Connections With The Existing Power And Earth Cables/strips, Testing The Ea Set Making Good The Damages To The Foundation Etc. As Required., Providing And Laying Plain Cement Concrete In The Ratio Of 1 Is To 2 Is To 4 Using One Part Cement Two Parts Coarse M Sand And Four Parts Graded Stone Aggregate Of 20 Mm Nominal Size In The Foundation Of Dg Set Including Excavation Dressing Ramming Disposal Of Surplus Soil Shuttering Work And Providing 15 Mm Thick Cement Plaster In The Ratio Of 1 Is To 4 Using One Part Cement And Four Parts Fine M Sand., Providing And Fixing 25 Mm X 3 Mm G.i. Strip On Surface Or In Recess For Connections Etc. As Required., Supplying And Laying Of 4c 16 Sq.mm Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Ug Cable Of 1.1 Kv Grade Direct In Ground/ In Pipe/ On Surface Of Wall/ Loose In Panel As Required., Providing And Laying 16 Sq Mm Pvc Insulated Frls Earthing Cable Green Including Providing Necessary Copper Sockets As Required, Supplying And Making End Terminations With Brass Compression Gland And Aluminium Lugs For The Following Sizes Of Pvc Sheathed / Xlpe Luminium Conductor Ug Cable Of 1.1 Kv Grade As Required----4c 16 Sq.mm, Providing Maintenance Free Earthing Arrangement With Copper Coated Solid Steel Rod Of 20 Mm Dia And 3m Length, Copper Coated Connectors And Fasteners For Connecting Electrodes With Earthing Conductor/ Strip I/c Supplying And Filling 8 Kg. Earth Enhancing Mineral Compound. The Electrodes Shall Be Hand Driven Or Hammered Into The Earth., S/d 8 Swg Gi Wire For Loop Earthing In The Existing Surface/ Recessed Cable As Reqd., Earthing With G.i. Eatrth Pipe 1.5mtr Long By Hammering Of 40 Mm Dia Including Accessories As Required., Sitcof 63 A , 4 Pole On Load Change Over Switch Suitable For 415 Volt, 50 Hz Ac Supply In Sheet Steel Enclosure , Fixing The Same On Wall With Suitable Nut Bolts, Connections, Testing, Commissioning Etc. As Required, Dismantling The Existing Canopy Of 7.5/15/20/30 Kva Ea Set, Manually Loading All The Dismantled Parts Of Accoustic Insulation, And Control Panel Etc With Out Any Damage, Re-assembling The E/a Set Canopy ,engine, Alternator, Control Panel With All Accessories Complete As Required, Supplying And Fixing 50 Mm Dia Class B Ms Pipes For The Exhaust System Of The Ea Set Including Providing Suitable Bends Reducers Coarse Wire Mesh Cutting Welding Heat Resistant Painting Etc As Required, Supplying And Fixing 40 Mm Dia A Class Gi Pipe For Cable Protection And Silencer Support Including Necessary Supports Painting Welding If Required Etc As Required, Painting Of 15/30 Kva Ea Set With One Coat Of Zinchromate Primer And Two Coats Of Enamel Paint After Removing Rust And Dust ,cleaning Etc Complete As Required, Supplying And Laying 20 Mm Dia Class C Ms Pipe In Recess/surface For Fuel Line I/c Cutting, Welding, Painting, Supplying And Fixing Accessories,plastering Etc. As Required within the Kerala jurisdiction

The official timeline and deadline details for Tender For Dismantling And Shifting Of The Existing 7.5 Kva Ea Set , Dismantling And Shifting Of The Existing 15 And 20 Kva Ea Set , Dismantling And Shifting Of The Existing 30 Kva Ea Set , Providing And Laying Plain Cement Concrete , Providing And Fixing 25 Mm X 3 Mm G.i. Strip On Surface Or In Recess For Connections Etc. As Required. , Supplying And Laying Of Ug Cable Of 1.1 Kv , Providing And Laying 16 Sq Mm Pvc Insulated Frls Earthing Cable Green Including Providing Necessary Copper Sockets As Required , Supplying And Making End Terminations , Providing Maintenance Free Earthing Arrangement , Supply And Installation 8 Swg Gi Wire For Loop Earthing , Earthing With G.i. Eatrth Pipe 1.5mtr Long By Hammering Of 40 Mm Dia Including Accessories As Required. , Supply Installation Testing And Commissioning Of 63 A , 4 Pole On Load Change Over Switch , Dismantling Of Existing Canopy Of 7 5 15 20 And 30 Kva Ea Sets , Supplying And Fixing 50 Mm Dia Class B Ms Pipes For The Exhaust System Of The Ea Set , Supplying And Fixing 40 Mm Dia A Class Gi Pipe For Cable Protection And Silencer Support Including Necessary Supports Painting Welding If Required Etc As Required , Painting Of Ea Set With One Coat Of Zinchromate Primer And Two Coats Of Enamel Paint After Removing Rust And Dust ,cleaning Etc Complete As Required , Supplying And Laying 20 Mm Dia Class C Ms Pipe, Shifting Of Dg Sets In Kollam Ba, Dismantling And Shifting Of The Existing 7.5 Kva Ea Testing The Ea Set Making Good The Damages To The Foundation Etc. As Required., Dismantling & Shifting Of The Existing 15/20 Kva Ea Set With Acoustic Enclosure From Various Bts With All Accessories To A Location Within The Ba As Directed By The Authority Concerned Incharge Loading ,transportation,unloading Leading To Position And Itc Of The Shifted 15 Kva Ea Set With Enclosure In The Existing Foundation At The New Station, Connections With The Existing Power And Earth Cables/strips, Testing The Ea Set Making Good The Damages To The Foundation Etc. As Required., Dismantling & Shifting Of The Existing 30 Kva Ea Set With Acoustic Enclosure From Various Bts With All Accessories To A Location Within The Ba As Directed By The Authority Concerned Incharge Loading ,transportation,unloading Leading To Position And Itc Of The Shifted 15 Kva Ea Set With Enclosure In The Existing Foundation At The New Station, Connections With The Existing Power And Earth Cables/strips, Testing The Ea Set Making Good The Damages To The Foundation Etc. As Required., Providing And Laying Plain Cement Concrete In The Ratio Of 1 Is To 2 Is To 4 Using One Part Cement Two Parts Coarse M Sand And Four Parts Graded Stone Aggregate Of 20 Mm Nominal Size In The Foundation Of Dg Set Including Excavation Dressing Ramming Disposal Of Surplus Soil Shuttering Work And Providing 15 Mm Thick Cement Plaster In The Ratio Of 1 Is To 4 Using One Part Cement And Four Parts Fine M Sand., Providing And Fixing 25 Mm X 3 Mm G.i. Strip On Surface Or In Recess For Connections Etc. As Required., Supplying And Laying Of 4c 16 Sq.mm Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Ug Cable Of 1.1 Kv Grade Direct In Ground/ In Pipe/ On Surface Of Wall/ Loose In Panel As Required., Providing And Laying 16 Sq Mm Pvc Insulated Frls Earthing Cable Green Including Providing Necessary Copper Sockets As Required, Supplying And Making End Terminations With Brass Compression Gland And Aluminium Lugs For The Following Sizes Of Pvc Sheathed / Xlpe Luminium Conductor Ug Cable Of 1.1 Kv Grade As Required----4c 16 Sq.mm, Providing Maintenance Free Earthing Arrangement With Copper Coated Solid Steel Rod Of 20 Mm Dia And 3m Length, Copper Coated Connectors And Fasteners For Connecting Electrodes With Earthing Conductor/ Strip I/c Supplying And Filling 8 Kg. Earth Enhancing Mineral Compound. The Electrodes Shall Be Hand Driven Or Hammered Into The Earth., S/d 8 Swg Gi Wire For Loop Earthing In The Existing Surface/ Recessed Cable As Reqd., Earthing With G.i. Eatrth Pipe 1.5mtr Long By Hammering Of 40 Mm Dia Including Accessories As Required., Sitcof 63 A , 4 Pole On Load Change Over Switch Suitable For 415 Volt, 50 Hz Ac Supply In Sheet Steel Enclosure , Fixing The Same On Wall With Suitable Nut Bolts, Connections, Testing, Commissioning Etc. As Required, Dismantling The Existing Canopy Of 7.5/15/20/30 Kva Ea Set, Manually Loading All The Dismantled Parts Of Accoustic Insulation, And Control Panel Etc With Out Any Damage, Re-assembling The E/a Set Canopy ,engine, Alternator, Control Panel With All Accessories Complete As Required, Supplying And Fixing 50 Mm Dia Class B Ms Pipes For The Exhaust System Of The Ea Set Including Providing Suitable Bends Reducers Coarse Wire Mesh Cutting Welding Heat Resistant Painting Etc As Required, Supplying And Fixing 40 Mm Dia A Class Gi Pipe For Cable Protection And Silencer Support Including Necessary Supports Painting Welding If Required Etc As Required, Painting Of 15/30 Kva Ea Set With One Coat Of Zinchromate Primer And Two Coats Of Enamel Paint After Removing Rust And Dust ,cleaning Etc Complete As Required, Supplying And Laying 20 Mm Dia Class C Ms Pipe In Recess/surface For Fuel Line I/c Cutting, Welding, Painting, Supplying And Fixing Accessories,plastering Etc. As Required are available inside the detailed notification files. Bidders planning to target this contract in Kollam should check the official portal schedule early to complete their online technical and financial submission well before the closing hours.