tender for s & i of body shell items & partition frames (km dtc), supply and installation body shell items & partition frames for km/dtc/rvn l coaches as per drg nos, 1. 98210029, alt 'b' - 1 no 2. 98210028, alt 'b' - 1 no 3. 98210027, alt 'ni l' - 2 nos 4. 99410146, alt 'a' - 1 no. 5. 99410145, alt 'a' - 1 no. 6. 99410144, alt 'nil' - 1 no. 7. 99410 143, alt 'nil' - 1 no 8. 99410142, alt 'nil' - 1 no 9. 99410141, alt 'nil' - 1 no. 10.99410140, alt 'a' - 1 n o. 11.99410006, alt 'a' - 1 no. 12.99510008, alt 'a' - 2 nos. 13.99510007, alt 'a' - 2 nos. 14.99510004, alt 'a' - 6 nos. 15.99510003, alt 'a' - 6 no. 16.99410003, alt 'nil' - 1 no, 17.99410005, alt 'a' - 1 no. 18 .98210006, alt 'd' - 1 no. 19.98210007, alt 'c' - 1 no, 20.98210047, alt 'b' - 2 nos, 21.99410001, item- 14, alt 'nil' - 8 nos 22.99410001, item-15, alt 'nil' - 8 nos. the firm shall fulfil the manufacturi ng facility as per icf/md/spec-313, issue status-01, rev.01. special condition : installation r equired annexure 'a' dated 13.09.2023 to be followed. 1. the frame work and weld parts shall be packed in the container/steel pallet as per icf/j&t/sk-1865-alt 'b'. 2. the weld parts shall be placed at the bottom and frame work at the top. 3. other partition frames not fitting in the container shall be stacked one over the other, secured using packing strip and placed in steel pallet. 4. packing and plac ing of the items to be such that the frames could be removed easily from the packing prior to weld pa rts without any damages. 5. the height of each stack shall not exceed 750mm for easy handling. 6. s uitable and sufficient packing strips to be used such that stacked items do not disintegrate during tra nsit, storage and handling. there will be minor changes in the drawings. the supplier shal l obtain the latest drawings before commencing manufacturing. -safety item - warran ty period: 30 months after the date of delivery -quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs

You can fill out the integrated inquiry form below on this detail page to share your company profile. Our consultancy desk will review your query regarding supply and installation,packing strip,steel pallet,safety item parameters and guide you on how to coordinate efficiently with the procurement team of Integral Coach Factory ICF

Tender18 provides end-to-end professional bidding support and documentation advisory for Tender For S & I Of Body Shell Items & Partition Frames (km Dtc), Supply And Installation Body Shell Items & Partition Frames For Km/dtc/rvn L Coaches As Per Drg Nos, 1. 98210029, Alt 'b' - 1 No 2. 98210028, Alt 'b' - 1 No 3. 98210027, Alt 'ni L' - 2 Nos 4. 99410146, Alt 'a' - 1 No. 5. 99410145, Alt 'a' - 1 No. 6. 99410144, Alt 'nil' - 1 No. 7. 99410 143, Alt 'nil' - 1 No 8. 99410142, Alt 'nil' - 1 No 9. 99410141, Alt 'nil' - 1 No. 10.99410140, Alt 'a' - 1 N O. 11.99410006, Alt 'a' - 1 No. 12.99510008, Alt 'a' - 2 Nos. 13.99510007, Alt 'a' - 2 Nos. 14.99510004, Alt 'a' - 6 Nos. 15.99510003, Alt 'a' - 6 No. 16.99410003, Alt 'nil' - 1 No, 17.99410005, Alt 'a' - 1 No. 18 .98210006, Alt 'd' - 1 No. 19.98210007, Alt 'c' - 1 No, 20.98210047, Alt 'b' - 2 Nos, 21.99410001, Item- 14, Alt 'nil' - 8 Nos 22.99410001, Item-15, Alt 'nil' - 8 Nos. The Firm Shall Fulfil The Manufacturi Ng Facility As Per Icf/md/spec-313, Issue Status-01, Rev.01. Special Condition : Installation R Equired Annexure 'a' Dated 13.09.2023 To Be Followed. 1. The Frame Work And Weld Parts Shall Be Packed In The Container/steel Pallet As Per Icf/j&t/sk-1865-alt 'b'. 2. The Weld Parts Shall Be Placed At The Bottom And Frame Work At The Top. 3. Other Partition Frames Not Fitting In The Container Shall Be Stacked One Over The Other, Secured Using Packing Strip And Placed In Steel Pallet. 4. Packing And Plac Ing Of The Items To Be Such That The Frames Could Be Removed Easily From The Packing Prior To Weld Pa Rts Without Any Damages. 5. The Height Of Each Stack Shall Not Exceed 750mm For Easy Handling. 6. S Uitable And Sufficient Packing Strips To Be Used Such That Stacked Items Do Not Disintegrate During Tra Nsit, Storage And Handling. There Will Be Minor Changes In The Drawings. The Supplier Shal L Obtain The Latest Drawings Before Commencing Manufacturing. -safety Item - Warran Ty Period: 30 Months After The Date Of Delivery -quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs . Our senior analysts help you decode the complete project guidelines, manage accurate costing sheets, and complete error-free submissions on the official platform used by Integral Coach Factory ICF.

Most online bids face rejection during the initial evaluation round due to avoidable errors like uploading blurred document scans, submitting expired DSCs, or missing critical experience papers required for Tender For S & I Of Body Shell Items & Partition Frames (km Dtc), Supply And Installation Body Shell Items & Partition Frames For Km/dtc/rvn L Coaches As Per Drg Nos, 1. 98210029, Alt 'b' - 1 No 2. 98210028, Alt 'b' - 1 No 3. 98210027, Alt 'ni L' - 2 Nos 4. 99410146, Alt 'a' - 1 No. 5. 99410145, Alt 'a' - 1 No. 6. 99410144, Alt 'nil' - 1 No. 7. 99410 143, Alt 'nil' - 1 No 8. 99410142, Alt 'nil' - 1 No 9. 99410141, Alt 'nil' - 1 No. 10.99410140, Alt 'a' - 1 N O. 11.99410006, Alt 'a' - 1 No. 12.99510008, Alt 'a' - 2 Nos. 13.99510007, Alt 'a' - 2 Nos. 14.99510004, Alt 'a' - 6 Nos. 15.99510003, Alt 'a' - 6 No. 16.99410003, Alt 'nil' - 1 No, 17.99410005, Alt 'a' - 1 No. 18 .98210006, Alt 'd' - 1 No. 19.98210007, Alt 'c' - 1 No, 20.98210047, Alt 'b' - 2 Nos, 21.99410001, Item- 14, Alt 'nil' - 8 Nos 22.99410001, Item-15, Alt 'nil' - 8 Nos. The Firm Shall Fulfil The Manufacturi Ng Facility As Per Icf/md/spec-313, Issue Status-01, Rev.01. Special Condition : Installation R Equired Annexure 'a' Dated 13.09.2023 To Be Followed. 1. The Frame Work And Weld Parts Shall Be Packed In The Container/steel Pallet As Per Icf/j&t/sk-1865-alt 'b'. 2. The Weld Parts Shall Be Placed At The Bottom And Frame Work At The Top. 3. Other Partition Frames Not Fitting In The Container Shall Be Stacked One Over The Other, Secured Using Packing Strip And Placed In Steel Pallet. 4. Packing And Plac Ing Of The Items To Be Such That The Frames Could Be Removed Easily From The Packing Prior To Weld Pa Rts Without Any Damages. 5. The Height Of Each Stack Shall Not Exceed 750mm For Easy Handling. 6. S Uitable And Sufficient Packing Strips To Be Used Such That Stacked Items Do Not Disintegrate During Tra Nsit, Storage And Handling. There Will Be Minor Changes In The Drawings. The Supplier Shal L Obtain The Latest Drawings Before Commencing Manufacturing. -safety Item - Warran Ty Period: 30 Months After The Date Of Delivery -quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs in Tamil Nadu.

Eligibility for outstation bidders depends entirely on the terms set inside the document for Tender For S & I Of Body Shell Items & Partition Frames (km Dtc), Supply And Installation Body Shell Items & Partition Frames For Km/dtc/rvn L Coaches As Per Drg Nos, 1. 98210029, Alt 'b' - 1 No 2. 98210028, Alt 'b' - 1 No 3. 98210027, Alt 'ni L' - 2 Nos 4. 99410146, Alt 'a' - 1 No. 5. 99410145, Alt 'a' - 1 No. 6. 99410144, Alt 'nil' - 1 No. 7. 99410 143, Alt 'nil' - 1 No 8. 99410142, Alt 'nil' - 1 No 9. 99410141, Alt 'nil' - 1 No. 10.99410140, Alt 'a' - 1 N O. 11.99410006, Alt 'a' - 1 No. 12.99510008, Alt 'a' - 2 Nos. 13.99510007, Alt 'a' - 2 Nos. 14.99510004, Alt 'a' - 6 Nos. 15.99510003, Alt 'a' - 6 No. 16.99410003, Alt 'nil' - 1 No, 17.99410005, Alt 'a' - 1 No. 18 .98210006, Alt 'd' - 1 No. 19.98210007, Alt 'c' - 1 No, 20.98210047, Alt 'b' - 2 Nos, 21.99410001, Item- 14, Alt 'nil' - 8 Nos 22.99410001, Item-15, Alt 'nil' - 8 Nos. The Firm Shall Fulfil The Manufacturi Ng Facility As Per Icf/md/spec-313, Issue Status-01, Rev.01. Special Condition : Installation R Equired Annexure 'a' Dated 13.09.2023 To Be Followed. 1. The Frame Work And Weld Parts Shall Be Packed In The Container/steel Pallet As Per Icf/j&t/sk-1865-alt 'b'. 2. The Weld Parts Shall Be Placed At The Bottom And Frame Work At The Top. 3. Other Partition Frames Not Fitting In The Container Shall Be Stacked One Over The Other, Secured Using Packing Strip And Placed In Steel Pallet. 4. Packing And Plac Ing Of The Items To Be Such That The Frames Could Be Removed Easily From The Packing Prior To Weld Pa Rts Without Any Damages. 5. The Height Of Each Stack Shall Not Exceed 750mm For Easy Handling. 6. S Uitable And Sufficient Packing Strips To Be Used Such That Stacked Items Do Not Disintegrate During Tra Nsit, Storage And Handling. There Will Be Minor Changes In The Drawings. The Supplier Shal L Obtain The Latest Drawings Before Commencing Manufacturing. -safety Item - Warran Ty Period: 30 Months After The Date Of Delivery -quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs. While many public sector projects allow national competitive bidding, certain localized works require local offices or specific registration metrics in Chennai.

If this procurement is routed through the central marketplace, an active GeM Seller ID is mandatory to supply supply and installation,packing strip,steel pallet,safety item items. Tender18 offers complete assistance for brand cataloging, profile creation, and vendor assessment required officially by Integral Coach Factory ICF

To register an eligible bid for these supply and installation,packing strip,steel pallet,safety item contracts, companies must prepare their core compliance documents. Vendors operating across Tamil Nadu must ensure they possess a valid GST registration, permanent account number (PAN), and active Class-3 Digital Signature Certificates.

This public procurement cycle is specifically looking for qualified vendors and suppliers who can provide high-quality supply and installation,packing strip,steel pallet,safety item solutions. The operational execution, delivery, and deployment of these materials must be managed locally within the Chennai region.

The estimated project cost and budget thresholds can be reviewed directly inside the tender document. Bidders can analyze these qualification files to check if their firm meets the financial capability criteria specified for Tender For S & I Of Body Shell Items & Partition Frames (km Dtc), Supply And Installation Body Shell Items & Partition Frames For Km/dtc/rvn L Coaches As Per Drg Nos, 1. 98210029, Alt 'b' - 1 No 2. 98210028, Alt 'b' - 1 No 3. 98210027, Alt 'ni L' - 2 Nos 4. 99410146, Alt 'a' - 1 No. 5. 99410145, Alt 'a' - 1 No. 6. 99410144, Alt 'nil' - 1 No. 7. 99410 143, Alt 'nil' - 1 No 8. 99410142, Alt 'nil' - 1 No 9. 99410141, Alt 'nil' - 1 No. 10.99410140, Alt 'a' - 1 N O. 11.99410006, Alt 'a' - 1 No. 12.99510008, Alt 'a' - 2 Nos. 13.99510007, Alt 'a' - 2 Nos. 14.99510004, Alt 'a' - 6 Nos. 15.99510003, Alt 'a' - 6 No. 16.99410003, Alt 'nil' - 1 No, 17.99410005, Alt 'a' - 1 No. 18 .98210006, Alt 'd' - 1 No. 19.98210007, Alt 'c' - 1 No, 20.98210047, Alt 'b' - 2 Nos, 21.99410001, Item- 14, Alt 'nil' - 8 Nos 22.99410001, Item-15, Alt 'nil' - 8 Nos. The Firm Shall Fulfil The Manufacturi Ng Facility As Per Icf/md/spec-313, Issue Status-01, Rev.01. Special Condition : Installation R Equired Annexure 'a' Dated 13.09.2023 To Be Followed. 1. The Frame Work And Weld Parts Shall Be Packed In The Container/steel Pallet As Per Icf/j&t/sk-1865-alt 'b'. 2. The Weld Parts Shall Be Placed At The Bottom And Frame Work At The Top. 3. Other Partition Frames Not Fitting In The Container Shall Be Stacked One Over The Other, Secured Using Packing Strip And Placed In Steel Pallet. 4. Packing And Plac Ing Of The Items To Be Such That The Frames Could Be Removed Easily From The Packing Prior To Weld Pa Rts Without Any Damages. 5. The Height Of Each Stack Shall Not Exceed 750mm For Easy Handling. 6. S Uitable And Sufficient Packing Strips To Be Used Such That Stacked Items Do Not Disintegrate During Tra Nsit, Storage And Handling. There Will Be Minor Changes In The Drawings. The Supplier Shal L Obtain The Latest Drawings Before Commencing Manufacturing. -safety Item - Warran Ty Period: 30 Months After The Date Of Delivery -quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs by Integral Coach Factory ICF

You can download the commercial Bill of Quantities (BOQ) spreadsheet directly using the secure link provided on this page. The BOQ file contains the item descriptions and rate filling forms officially validated for Tender For S & I Of Body Shell Items & Partition Frames (km Dtc), Supply And Installation Body Shell Items & Partition Frames For Km/dtc/rvn L Coaches As Per Drg Nos, 1. 98210029, Alt 'b' - 1 No 2. 98210028, Alt 'b' - 1 No 3. 98210027, Alt 'ni L' - 2 Nos 4. 99410146, Alt 'a' - 1 No. 5. 99410145, Alt 'a' - 1 No. 6. 99410144, Alt 'nil' - 1 No. 7. 99410 143, Alt 'nil' - 1 No 8. 99410142, Alt 'nil' - 1 No 9. 99410141, Alt 'nil' - 1 No. 10.99410140, Alt 'a' - 1 N O. 11.99410006, Alt 'a' - 1 No. 12.99510008, Alt 'a' - 2 Nos. 13.99510007, Alt 'a' - 2 Nos. 14.99510004, Alt 'a' - 6 Nos. 15.99510003, Alt 'a' - 6 No. 16.99410003, Alt 'nil' - 1 No, 17.99410005, Alt 'a' - 1 No. 18 .98210006, Alt 'd' - 1 No. 19.98210007, Alt 'c' - 1 No, 20.98210047, Alt 'b' - 2 Nos, 21.99410001, Item- 14, Alt 'nil' - 8 Nos 22.99410001, Item-15, Alt 'nil' - 8 Nos. The Firm Shall Fulfil The Manufacturi Ng Facility As Per Icf/md/spec-313, Issue Status-01, Rev.01. Special Condition : Installation R Equired Annexure 'a' Dated 13.09.2023 To Be Followed. 1. The Frame Work And Weld Parts Shall Be Packed In The Container/steel Pallet As Per Icf/j&t/sk-1865-alt 'b'. 2. The Weld Parts Shall Be Placed At The Bottom And Frame Work At The Top. 3. Other Partition Frames Not Fitting In The Container Shall Be Stacked One Over The Other, Secured Using Packing Strip And Placed In Steel Pallet. 4. Packing And Plac Ing Of The Items To Be Such That The Frames Could Be Removed Easily From The Packing Prior To Weld Pa Rts Without Any Damages. 5. The Height Of Each Stack Shall Not Exceed 750mm For Easy Handling. 6. S Uitable And Sufficient Packing Strips To Be Used Such That Stacked Items Do Not Disintegrate During Tra Nsit, Storage And Handling. There Will Be Minor Changes In The Drawings. The Supplier Shal L Obtain The Latest Drawings Before Commencing Manufacturing. -safety Item - Warran Ty Period: 30 Months After The Date Of Delivery -quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs within the Tamil Nadu jurisdiction

The official timeline and deadline details for Tender For S & I Of Body Shell Items & Partition Frames (km Dtc), Supply And Installation Body Shell Items & Partition Frames For Km/dtc/rvn L Coaches As Per Drg Nos, 1. 98210029, Alt 'b' - 1 No 2. 98210028, Alt 'b' - 1 No 3. 98210027, Alt 'ni L' - 2 Nos 4. 99410146, Alt 'a' - 1 No. 5. 99410145, Alt 'a' - 1 No. 6. 99410144, Alt 'nil' - 1 No. 7. 99410 143, Alt 'nil' - 1 No 8. 99410142, Alt 'nil' - 1 No 9. 99410141, Alt 'nil' - 1 No. 10.99410140, Alt 'a' - 1 N O. 11.99410006, Alt 'a' - 1 No. 12.99510008, Alt 'a' - 2 Nos. 13.99510007, Alt 'a' - 2 Nos. 14.99510004, Alt 'a' - 6 Nos. 15.99510003, Alt 'a' - 6 No. 16.99410003, Alt 'nil' - 1 No, 17.99410005, Alt 'a' - 1 No. 18 .98210006, Alt 'd' - 1 No. 19.98210007, Alt 'c' - 1 No, 20.98210047, Alt 'b' - 2 Nos, 21.99410001, Item- 14, Alt 'nil' - 8 Nos 22.99410001, Item-15, Alt 'nil' - 8 Nos. The Firm Shall Fulfil The Manufacturi Ng Facility As Per Icf/md/spec-313, Issue Status-01, Rev.01. Special Condition : Installation R Equired Annexure 'a' Dated 13.09.2023 To Be Followed. 1. The Frame Work And Weld Parts Shall Be Packed In The Container/steel Pallet As Per Icf/j&t/sk-1865-alt 'b'. 2. The Weld Parts Shall Be Placed At The Bottom And Frame Work At The Top. 3. Other Partition Frames Not Fitting In The Container Shall Be Stacked One Over The Other, Secured Using Packing Strip And Placed In Steel Pallet. 4. Packing And Plac Ing Of The Items To Be Such That The Frames Could Be Removed Easily From The Packing Prior To Weld Pa Rts Without Any Damages. 5. The Height Of Each Stack Shall Not Exceed 750mm For Easy Handling. 6. S Uitable And Sufficient Packing Strips To Be Used Such That Stacked Items Do Not Disintegrate During Tra Nsit, Storage And Handling. There Will Be Minor Changes In The Drawings. The Supplier Shal L Obtain The Latest Drawings Before Commencing Manufacturing. -safety Item - Warran Ty Period: 30 Months After The Date Of Delivery -quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs are available inside the detailed notification files. Bidders planning to target this contract in Chennai should check the official portal schedule early to complete their online technical and financial submission well before the closing hours.