tender for construction of pedestals for vihnu ji murti at patna museum, buddha marg, patna.earth work in excavation over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed, all kind of soil. supplying and filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. providing designation 100a one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of e/i. providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work upto plinth level, 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). extra for providing and mixing water proofing material in cement concrete work in the proportion recommended by the manufacturers. providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-all work upto plinth level, 1:1:2 (1 cement: 1 coarse sand: 2 graded stone aggregate 20 mm nominal size). reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. up to floor five level excluding cost of centring, shuttering, finishing and reinforcement, 1:1:2 (1 cement: 1 coarse sand: 2 graded stone aggregate 20 mm nominal size). centring and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns etc. for mass concrete, walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc, columns, pillars, piers, abutments, posts and struts. reinforcement for r.c.c.work including straightening, cutting, bending, placing in position and binding all complete. thermo-mechanically treated bars tmt c-500-8mm dia, thermo-mechanically treated bars tmt c-500-12mm dia, thermo-mechanically treated bars tmt c-500-16mm dia, thermo-mechanically treated bars tmt c-500-20mm dia. brick work with flash bricks as per is12894(2002) & is3495 in foundations and plinth in cement mortar 1:4 (1 cement: 4 coarse sand). cement plaster in course sand, 12 mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand). providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead. disposal of dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. carefully dismantling, lifting, shifting and re-fixing existing vishnu ji murti of size 2' x 4' x 7.5' from the existing location to the designated location, including arrangement of hydra crane, chain pulley blocks, lifting tackles, scaffolding, skilled labour, transportation, loading, unloading, temporary protection, all safety measures, alignment, levelling and re-installation complete as directed by the engineer-in-charge and concerned authorities.

You can fill out the integrated inquiry form below on this detail page to share your company profile. Our consultancy desk will review your query regarding reinforced cement concrete,construction of pedestals,water proofing material,cement concrete work,chain pulley blocks,loading unloading,cement concrete,stainless steel,safety measures,water proofing,concrete walls,skilled labour,concrete work,chain pulley,coarse sand,hydra crane,brick work,bricks,bolts parameters and guide you on how to coordinate efficiently with the procurement team of Department Of Art And Culture

Tender18 provides end-to-end professional bidding support and documentation advisory for Tender For Construction Of Pedestals For Vihnu Ji Murti At Patna Museum, Buddha Marg, Patna.earth Work In Excavation Over Areas (exceeding 30 Cm In Depth, 1.5m In Width As Well As 10 Sqm On Plan) Including Disposal Of Excavated Earth, Lead Upto 50m And Lift Upto 1.5m; Disposed Earth To Be Levelled And Neatly Dressed, All Kind Of Soil. Supplying And Filling In Plinth With Local Sand And Under Floors Including, Watering, Ramming Consolidating And Dressing Complete. Providing Designation 100a One Brick Flat Soling Joints Filled With Local Sand Including Cost Of Watering, Taxes, Royalty All Complete As Per Building Specification And Direction Of E/i. Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centring And Shuttering-all Work Upto Plinth Level, 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm Nominal Size). Extra For Providing And Mixing Water Proofing Material In Cement Concrete Work In The Proportion Recommended By The Manufacturers. Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement-all Work Upto Plinth Level, 1:1:2 (1 Cement: 1 Coarse Sand: 2 Graded Stone Aggregate 20 Mm Nominal Size). Reinforced Cement Concrete Work In Wall (any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts, Etc. Up To Floor Five Level Excluding Cost Of Centring, Shuttering, Finishing And Reinforcement, 1:1:2 (1 Cement: 1 Coarse Sand: 2 Graded Stone Aggregate 20 Mm Nominal Size). Centring And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns Etc. For Mass Concrete, Walls (any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses Etc, Columns, Pillars, Piers, Abutments, Posts And Struts. Reinforcement For R.c.c.work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete. Thermo-mechanically Treated Bars Tmt C-500-8mm Dia, Thermo-mechanically Treated Bars Tmt C-500-12mm Dia, Thermo-mechanically Treated Bars Tmt C-500-16mm Dia, Thermo-mechanically Treated Bars Tmt C-500-20mm Dia. Brick Work With Flash Bricks As Per Is12894(2002) & Is3495 In Foundations And Plinth In Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). Cement Plaster In Course Sand, 12 Mm Cement Plaster Of Mix: 1:4 (1 Cement: 4 Coarse Sand). Providing And Fixing Stainless Steel (grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/c Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-in-charge, (for Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). Filling Available Excavated Earth (excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth: Consolidating Each Deposited Layer By Ramming And Watering Lead. Disposal Of Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-in-charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. Carefully Dismantling, Lifting, Shifting And Re-fixing Existing Vishnu Ji Murti Of Size 2' X 4' X 7.5' From The Existing Location To The Designated Location, Including Arrangement Of Hydra Crane, Chain Pulley Blocks, Lifting Tackles, Scaffolding, Skilled Labour, Transportation, Loading, Unloading, Temporary Protection, All Safety Measures, Alignment, Levelling And Re-installation Complete As Directed By The Engineer-in-charge And Concerned Authorities. . Our senior analysts help you decode the complete project guidelines, manage accurate costing sheets, and complete error-free submissions on the official platform used by Department Of Art And Culture.

Most online bids face rejection during the initial evaluation round due to avoidable errors like uploading blurred document scans, submitting expired DSCs, or missing critical experience papers required for Tender For Construction Of Pedestals For Vihnu Ji Murti At Patna Museum, Buddha Marg, Patna.earth Work In Excavation Over Areas (exceeding 30 Cm In Depth, 1.5m In Width As Well As 10 Sqm On Plan) Including Disposal Of Excavated Earth, Lead Upto 50m And Lift Upto 1.5m; Disposed Earth To Be Levelled And Neatly Dressed, All Kind Of Soil. Supplying And Filling In Plinth With Local Sand And Under Floors Including, Watering, Ramming Consolidating And Dressing Complete. Providing Designation 100a One Brick Flat Soling Joints Filled With Local Sand Including Cost Of Watering, Taxes, Royalty All Complete As Per Building Specification And Direction Of E/i. Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centring And Shuttering-all Work Upto Plinth Level, 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm Nominal Size). Extra For Providing And Mixing Water Proofing Material In Cement Concrete Work In The Proportion Recommended By The Manufacturers. Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement-all Work Upto Plinth Level, 1:1:2 (1 Cement: 1 Coarse Sand: 2 Graded Stone Aggregate 20 Mm Nominal Size). Reinforced Cement Concrete Work In Wall (any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts, Etc. Up To Floor Five Level Excluding Cost Of Centring, Shuttering, Finishing And Reinforcement, 1:1:2 (1 Cement: 1 Coarse Sand: 2 Graded Stone Aggregate 20 Mm Nominal Size). Centring And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns Etc. For Mass Concrete, Walls (any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses Etc, Columns, Pillars, Piers, Abutments, Posts And Struts. Reinforcement For R.c.c.work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete. Thermo-mechanically Treated Bars Tmt C-500-8mm Dia, Thermo-mechanically Treated Bars Tmt C-500-12mm Dia, Thermo-mechanically Treated Bars Tmt C-500-16mm Dia, Thermo-mechanically Treated Bars Tmt C-500-20mm Dia. Brick Work With Flash Bricks As Per Is12894(2002) & Is3495 In Foundations And Plinth In Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). Cement Plaster In Course Sand, 12 Mm Cement Plaster Of Mix: 1:4 (1 Cement: 4 Coarse Sand). Providing And Fixing Stainless Steel (grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/c Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-in-charge, (for Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). Filling Available Excavated Earth (excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth: Consolidating Each Deposited Layer By Ramming And Watering Lead. Disposal Of Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-in-charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. Carefully Dismantling, Lifting, Shifting And Re-fixing Existing Vishnu Ji Murti Of Size 2' X 4' X 7.5' From The Existing Location To The Designated Location, Including Arrangement Of Hydra Crane, Chain Pulley Blocks, Lifting Tackles, Scaffolding, Skilled Labour, Transportation, Loading, Unloading, Temporary Protection, All Safety Measures, Alignment, Levelling And Re-installation Complete As Directed By The Engineer-in-charge And Concerned Authorities. in Bihar.

Eligibility for outstation bidders depends entirely on the terms set inside the document for Tender For Construction Of Pedestals For Vihnu Ji Murti At Patna Museum, Buddha Marg, Patna.earth Work In Excavation Over Areas (exceeding 30 Cm In Depth, 1.5m In Width As Well As 10 Sqm On Plan) Including Disposal Of Excavated Earth, Lead Upto 50m And Lift Upto 1.5m; Disposed Earth To Be Levelled And Neatly Dressed, All Kind Of Soil. Supplying And Filling In Plinth With Local Sand And Under Floors Including, Watering, Ramming Consolidating And Dressing Complete. Providing Designation 100a One Brick Flat Soling Joints Filled With Local Sand Including Cost Of Watering, Taxes, Royalty All Complete As Per Building Specification And Direction Of E/i. Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centring And Shuttering-all Work Upto Plinth Level, 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm Nominal Size). Extra For Providing And Mixing Water Proofing Material In Cement Concrete Work In The Proportion Recommended By The Manufacturers. Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement-all Work Upto Plinth Level, 1:1:2 (1 Cement: 1 Coarse Sand: 2 Graded Stone Aggregate 20 Mm Nominal Size). Reinforced Cement Concrete Work In Wall (any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts, Etc. Up To Floor Five Level Excluding Cost Of Centring, Shuttering, Finishing And Reinforcement, 1:1:2 (1 Cement: 1 Coarse Sand: 2 Graded Stone Aggregate 20 Mm Nominal Size). Centring And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns Etc. For Mass Concrete, Walls (any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses Etc, Columns, Pillars, Piers, Abutments, Posts And Struts. Reinforcement For R.c.c.work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete. Thermo-mechanically Treated Bars Tmt C-500-8mm Dia, Thermo-mechanically Treated Bars Tmt C-500-12mm Dia, Thermo-mechanically Treated Bars Tmt C-500-16mm Dia, Thermo-mechanically Treated Bars Tmt C-500-20mm Dia. Brick Work With Flash Bricks As Per Is12894(2002) & Is3495 In Foundations And Plinth In Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). Cement Plaster In Course Sand, 12 Mm Cement Plaster Of Mix: 1:4 (1 Cement: 4 Coarse Sand). Providing And Fixing Stainless Steel (grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/c Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-in-charge, (for Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). Filling Available Excavated Earth (excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth: Consolidating Each Deposited Layer By Ramming And Watering Lead. Disposal Of Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-in-charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. Carefully Dismantling, Lifting, Shifting And Re-fixing Existing Vishnu Ji Murti Of Size 2' X 4' X 7.5' From The Existing Location To The Designated Location, Including Arrangement Of Hydra Crane, Chain Pulley Blocks, Lifting Tackles, Scaffolding, Skilled Labour, Transportation, Loading, Unloading, Temporary Protection, All Safety Measures, Alignment, Levelling And Re-installation Complete As Directed By The Engineer-in-charge And Concerned Authorities.. While many public sector projects allow national competitive bidding, certain localized works require local offices or specific registration metrics in Patna.

If this procurement is routed through the central marketplace, an active GeM Seller ID is mandatory to supply reinforced cement concrete,construction of pedestals,water proofing material,cement concrete work,chain pulley blocks,loading unloading,cement concrete,stainless steel,safety measures,water proofing,concrete walls,skilled labour,concrete work,chain pulley,coarse sand,hydra crane,brick work,bricks,bolts items. Tender18 offers complete assistance for brand cataloging, profile creation, and vendor assessment required officially by Department Of Art And Culture

To register an eligible bid for these reinforced cement concrete,construction of pedestals,water proofing material,cement concrete work,chain pulley blocks,loading unloading,cement concrete,stainless steel,safety measures,water proofing,concrete walls,skilled labour,concrete work,chain pulley,coarse sand,hydra crane,brick work,bricks,bolts contracts, companies must prepare their core compliance documents. Vendors operating across Bihar must ensure they possess a valid GST registration, permanent account number (PAN), and active Class-3 Digital Signature Certificates.

This public procurement cycle is specifically looking for qualified vendors and suppliers who can provide high-quality reinforced cement concrete,construction of pedestals,water proofing material,cement concrete work,chain pulley blocks,loading unloading,cement concrete,stainless steel,safety measures,water proofing,concrete walls,skilled labour,concrete work,chain pulley,coarse sand,hydra crane,brick work,bricks,bolts solutions. The operational execution, delivery, and deployment of these materials must be managed locally within the Patna region.

The estimated project cost and budget thresholds can be reviewed directly inside the tender document. Bidders can analyze these qualification files to check if their firm meets the financial capability criteria specified for Tender For Construction Of Pedestals For Vihnu Ji Murti At Patna Museum, Buddha Marg, Patna.earth Work In Excavation Over Areas (exceeding 30 Cm In Depth, 1.5m In Width As Well As 10 Sqm On Plan) Including Disposal Of Excavated Earth, Lead Upto 50m And Lift Upto 1.5m; Disposed Earth To Be Levelled And Neatly Dressed, All Kind Of Soil. Supplying And Filling In Plinth With Local Sand And Under Floors Including, Watering, Ramming Consolidating And Dressing Complete. Providing Designation 100a One Brick Flat Soling Joints Filled With Local Sand Including Cost Of Watering, Taxes, Royalty All Complete As Per Building Specification And Direction Of E/i. Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centring And Shuttering-all Work Upto Plinth Level, 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm Nominal Size). Extra For Providing And Mixing Water Proofing Material In Cement Concrete Work In The Proportion Recommended By The Manufacturers. Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement-all Work Upto Plinth Level, 1:1:2 (1 Cement: 1 Coarse Sand: 2 Graded Stone Aggregate 20 Mm Nominal Size). Reinforced Cement Concrete Work In Wall (any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts, Etc. Up To Floor Five Level Excluding Cost Of Centring, Shuttering, Finishing And Reinforcement, 1:1:2 (1 Cement: 1 Coarse Sand: 2 Graded Stone Aggregate 20 Mm Nominal Size). Centring And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns Etc. For Mass Concrete, Walls (any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses Etc, Columns, Pillars, Piers, Abutments, Posts And Struts. Reinforcement For R.c.c.work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete. Thermo-mechanically Treated Bars Tmt C-500-8mm Dia, Thermo-mechanically Treated Bars Tmt C-500-12mm Dia, Thermo-mechanically Treated Bars Tmt C-500-16mm Dia, Thermo-mechanically Treated Bars Tmt C-500-20mm Dia. Brick Work With Flash Bricks As Per Is12894(2002) & Is3495 In Foundations And Plinth In Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). Cement Plaster In Course Sand, 12 Mm Cement Plaster Of Mix: 1:4 (1 Cement: 4 Coarse Sand). Providing And Fixing Stainless Steel (grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/c Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-in-charge, (for Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). Filling Available Excavated Earth (excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth: Consolidating Each Deposited Layer By Ramming And Watering Lead. Disposal Of Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-in-charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. Carefully Dismantling, Lifting, Shifting And Re-fixing Existing Vishnu Ji Murti Of Size 2' X 4' X 7.5' From The Existing Location To The Designated Location, Including Arrangement Of Hydra Crane, Chain Pulley Blocks, Lifting Tackles, Scaffolding, Skilled Labour, Transportation, Loading, Unloading, Temporary Protection, All Safety Measures, Alignment, Levelling And Re-installation Complete As Directed By The Engineer-in-charge And Concerned Authorities. by Department Of Art And Culture

You can download the commercial Bill of Quantities (BOQ) spreadsheet directly using the secure link provided on this page. The BOQ file contains the item descriptions and rate filling forms officially validated for Tender For Construction Of Pedestals For Vihnu Ji Murti At Patna Museum, Buddha Marg, Patna.earth Work In Excavation Over Areas (exceeding 30 Cm In Depth, 1.5m In Width As Well As 10 Sqm On Plan) Including Disposal Of Excavated Earth, Lead Upto 50m And Lift Upto 1.5m; Disposed Earth To Be Levelled And Neatly Dressed, All Kind Of Soil. Supplying And Filling In Plinth With Local Sand And Under Floors Including, Watering, Ramming Consolidating And Dressing Complete. Providing Designation 100a One Brick Flat Soling Joints Filled With Local Sand Including Cost Of Watering, Taxes, Royalty All Complete As Per Building Specification And Direction Of E/i. Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centring And Shuttering-all Work Upto Plinth Level, 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm Nominal Size). Extra For Providing And Mixing Water Proofing Material In Cement Concrete Work In The Proportion Recommended By The Manufacturers. Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement-all Work Upto Plinth Level, 1:1:2 (1 Cement: 1 Coarse Sand: 2 Graded Stone Aggregate 20 Mm Nominal Size). Reinforced Cement Concrete Work In Wall (any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts, Etc. Up To Floor Five Level Excluding Cost Of Centring, Shuttering, Finishing And Reinforcement, 1:1:2 (1 Cement: 1 Coarse Sand: 2 Graded Stone Aggregate 20 Mm Nominal Size). Centring And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns Etc. For Mass Concrete, Walls (any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses Etc, Columns, Pillars, Piers, Abutments, Posts And Struts. Reinforcement For R.c.c.work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete. Thermo-mechanically Treated Bars Tmt C-500-8mm Dia, Thermo-mechanically Treated Bars Tmt C-500-12mm Dia, Thermo-mechanically Treated Bars Tmt C-500-16mm Dia, Thermo-mechanically Treated Bars Tmt C-500-20mm Dia. Brick Work With Flash Bricks As Per Is12894(2002) & Is3495 In Foundations And Plinth In Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). Cement Plaster In Course Sand, 12 Mm Cement Plaster Of Mix: 1:4 (1 Cement: 4 Coarse Sand). Providing And Fixing Stainless Steel (grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/c Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-in-charge, (for Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). Filling Available Excavated Earth (excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth: Consolidating Each Deposited Layer By Ramming And Watering Lead. Disposal Of Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-in-charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. Carefully Dismantling, Lifting, Shifting And Re-fixing Existing Vishnu Ji Murti Of Size 2' X 4' X 7.5' From The Existing Location To The Designated Location, Including Arrangement Of Hydra Crane, Chain Pulley Blocks, Lifting Tackles, Scaffolding, Skilled Labour, Transportation, Loading, Unloading, Temporary Protection, All Safety Measures, Alignment, Levelling And Re-installation Complete As Directed By The Engineer-in-charge And Concerned Authorities. within the Bihar jurisdiction

The official timeline and deadline details for Tender For Construction Of Pedestals For Vihnu Ji Murti At Patna Museum, Buddha Marg, Patna.earth Work In Excavation Over Areas (exceeding 30 Cm In Depth, 1.5m In Width As Well As 10 Sqm On Plan) Including Disposal Of Excavated Earth, Lead Upto 50m And Lift Upto 1.5m; Disposed Earth To Be Levelled And Neatly Dressed, All Kind Of Soil. Supplying And Filling In Plinth With Local Sand And Under Floors Including, Watering, Ramming Consolidating And Dressing Complete. Providing Designation 100a One Brick Flat Soling Joints Filled With Local Sand Including Cost Of Watering, Taxes, Royalty All Complete As Per Building Specification And Direction Of E/i. Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centring And Shuttering-all Work Upto Plinth Level, 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm Nominal Size). Extra For Providing And Mixing Water Proofing Material In Cement Concrete Work In The Proportion Recommended By The Manufacturers. Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement-all Work Upto Plinth Level, 1:1:2 (1 Cement: 1 Coarse Sand: 2 Graded Stone Aggregate 20 Mm Nominal Size). Reinforced Cement Concrete Work In Wall (any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts, Etc. Up To Floor Five Level Excluding Cost Of Centring, Shuttering, Finishing And Reinforcement, 1:1:2 (1 Cement: 1 Coarse Sand: 2 Graded Stone Aggregate 20 Mm Nominal Size). Centring And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns Etc. For Mass Concrete, Walls (any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses Etc, Columns, Pillars, Piers, Abutments, Posts And Struts. Reinforcement For R.c.c.work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete. Thermo-mechanically Treated Bars Tmt C-500-8mm Dia, Thermo-mechanically Treated Bars Tmt C-500-12mm Dia, Thermo-mechanically Treated Bars Tmt C-500-16mm Dia, Thermo-mechanically Treated Bars Tmt C-500-20mm Dia. Brick Work With Flash Bricks As Per Is12894(2002) & Is3495 In Foundations And Plinth In Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). Cement Plaster In Course Sand, 12 Mm Cement Plaster Of Mix: 1:4 (1 Cement: 4 Coarse Sand). Providing And Fixing Stainless Steel (grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/c Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-in-charge, (for Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). Filling Available Excavated Earth (excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth: Consolidating Each Deposited Layer By Ramming And Watering Lead. Disposal Of Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-in-charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. Carefully Dismantling, Lifting, Shifting And Re-fixing Existing Vishnu Ji Murti Of Size 2' X 4' X 7.5' From The Existing Location To The Designated Location, Including Arrangement Of Hydra Crane, Chain Pulley Blocks, Lifting Tackles, Scaffolding, Skilled Labour, Transportation, Loading, Unloading, Temporary Protection, All Safety Measures, Alignment, Levelling And Re-installation Complete As Directed By The Engineer-in-charge And Concerned Authorities. are available inside the detailed notification files. Bidders planning to target this contract in Patna should check the official portal schedule early to complete their online technical and financial submission well before the closing hours.