sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

100Latest Wheel lock clamp Tenders List

Latest Wheel lock clamp Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Wheel lock clamp tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Wheel lock clamp tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Wheel lock clamp Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Wheel lock clamp tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Wheel lock clamp Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Wheel lock clamp Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Wheel lock clamp Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Wheel lock clamp tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Wheel lock clamp Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Wheel lock clamp sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Wheel lock clamp tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Wheel lock clamp tenders.

Is EMD mandatory for all Wheel lock clamp tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Wheel lock clamp work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Wheel lock clamp tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Wheel lock clamp Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17737720
Location : tiruchirappalli , tamil nadu
Source : GEM Tenders
NEW TENDER
tender for wheel lock clamp (q4)
Agency / Dept :
southern railway SR
Due Date :
Oct 22, 2026 (9 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17739781
Location : imphal , manipur
Source : GEM Tenders
NEW TENDER
tender for wheel lock clamp (q4)
Agency / Dept :
police department PD
Due Date :
Oct 22, 2026 (9 days left)
Tender Value :
4L
View Documents
T18 Ref No : 17466027
Location : raiganj , west bengal
Source : GEM Tenders
LIVE TENDER
tender for car jet washer , model of mock layout of a motor car , working model of automatic transmission gear box , demonstration board of electronic ignition system , demonstration board of mpfi system , model of different type of sensors , working model of power windows , working model of torque converter , automotive exhaust gas analyser , diesel engine crdi 4 stroke , multi scan tool , spring tension tester , diesel engine crdi 4 stroke engine , cut section of 4 or 6 cylinder diesel engine , air bag simulator , four stroke petrol engine with cng setup , tube and tyre vulcanizing machine , wheel alignment machine computerized , working condition of petrol mpfi engine , sewing machine , over lock machine thread , double needle machine , button hole machine , button sewing machine , plane table with stand , dgps , hand gps , echo sounder , multiangle magnetic clamp set , pedestal grinder , ev charger , ev charger home , tenoning machine single ended , universal wood working machine , band saw machine with provision , small type compressor with spray, mmv trade equipments, as pe specification
Agency / Dept :
department of industrial training
Due Date :
Oct 15, 2026 (2 days left)
Tender Value :
15L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17495020
Location : chennai , tamil nadu
Source : GEM Tenders
LIVE TENDER
corrigendum tender for assy. male idler wheel , assy. female idler wheel , union bracket , clamp ring , interface plate , m20x1.5x70mm long hex h cscl10.9 yellow zp bolt , nord-lock washer nl20, o.d-30.7mm , hub bolt - m18x1.5x100mm lg hex hcs cl 10.9 yellow zp , interface plate-rw , clamp ring-rw , hub bolt , toolings , test reports, assembly idler wheel, assy. male idler wheel, assy. female idler wheel, union bracket, clamp ring, interface plate, m20x1.5x70mm long hex h cscl10.9 yellow zp bolt, nord-lock washer nl20, o.d-30.7mm, hub bolt -m18x1.5x100mm lg hex hcs cl 10.9 yellow zp, interface plate-rw, clamp ring-rw, hub bolt, toolings, test reports
Agency / Dept :
defence research and development organisation DRDO
Due Date :
Oct 15, 2026 (2 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17613551
Location : bangalore , karnataka
Source : GEM Tenders
LIVE TENDER
tender for aluminium spirit scaffold levels , centre punches with octagonal shank and hand protection , movable tool trolley having suitable no of trays with dual colour foam insert for tools listed in table 1 , half round cabinet medium fine cut unhandled file , half round coarse medium cut unhandled file , needle file set smooth cut unhandled 160 mm 12 pcs , central nut adjustable wrenches with phosphate finish , three eighth inch square drive crowfoot open end wrenches , three eighth inch square drive crowfoot adjustable wrenches , one fourth inch square drive socket set with metric hex profile and pear head ratchet socket drivers , rail clips for one fourth inch sockets socket drivers , rail clips for three eighth inch sockets socket drivers , bi metal holesaw set for metal wood boards 16 mm 64 mm , tungsten carbide rotary burrs set for metal 10 pcs , hss step drill set 3 pcs , one fourth inch standard screwdriver bit for torqset security head screws 25 mm , slotted phillips pozidriv torx hex screwdriver set with precision grip 24 pcs , internal and external circlips resettable pliers , spare tips for 2928 series resettable circlips pliers , stepped c clamps , hand riveters with 360 swivel head , hand riveters with exchangeable heads , extensible riveters for cu al and stainless steel , wire twisting pliers one hand operation , spare wheels and pins for 401 402 pipe cutters , oil filter chain wrench , rubber belt wrench , stud extraction bits with blasted finish , hand hacksaw frames 432 mm , heavy duty square guide bench vices with interchangeable jaws , superflex plastic hammers with wooden handle , multipurpose tube bender , one fourth inch air screwdrivers 800 rpm , air engraving markers with low vibration , air blow guns with brass inlet and removable safety tip , bodywork bumping hammer , optical magnifier , pivoting inspection mirror with uv and insulated semi rigid cable , telescopic swivel head mirrors 52 mm , repair mirrors with metal handle 30 mm , flexible pick up tools with steel core , magnetic pick up tool with light , flexible magnetic pullers with rubber grip 10 18 mm , screwdriver 6 slot hooks for tool panels , hexagon 12 slot, rnc 111 26 gem, central nut wide opening jaw adjustable wrenches with rubber handle and phosphate finish, metric flat combination wrenches with chrome finish, imperial flat combination wrenches with chrome finish, metric lilliput combination wrenches with chrome finish, metric offset combination wrenches with chrome finish, metric combination ratcheting wrenches with chrome finish, one fourth inch square drive deep sockets with imperial bi hex profile, one fourth inch pear head reversible ratchets with 72 teeth and 5 action angle, three eighth inch square drive to one fourth inch socket decreasing adaptors, three eighth inch square drive to half inch socket increasing adaptors, three eighth inch pear head reversible ratchets with 80 teeth and 4.5 action angle, one fourth inch standard screwdriver bits for phillips screws, stubby slotted straight screwdrivers with rubber grip, slotted flat screwdrivers with rubber grip, hex bolster phillips screwdrivers with rubber grip, stubby phillips screwdrivers with rubber grip ph1 ph2, stubby pozidriv screwdrivers with rubber grip pz1 pz2, long bore hex head nut drivers with rubber grip, combination pliers with dual component handles, snipe nose pliers with dual component handles and lacquered finish, extra long snipe nose pliers with pvc coated handles and fine polish finish, grip locking pliers with curved jaws, special grips for sheet metals with nickel finish, grip locking pliers with long and slim jaws, wire twisting pliers with phosphate finish, pipe cutters, aluminium pen reamer, plastic pen reamer, aluminium wheel reamer, plastic wheel reamer, flexible magnetic pullers with rubber grip, collapsible magnetic pick up tool with light, non sparking centre punches aluminium bronze, rectangular aluminium profile spirit levels 2 vials, aluminium spirit scaffold levels, centre punches with octagonal shank and hand protection, movable tool trolley having suitable no of trays with dual colour foam insert for tools, half round cabinet medium fine cut unhandled file, half round coarse medium cut unhandled file, needle file set smooth cut unhandled 160 mm 12 pcs, central nut adjustable wrenches with phosphate finish, three eighth inch square drive crowfoot open end wrenches, three eighth inch square drive crowfoot adjustable wrenches, one fourth inch square drive socket set with metric hex profile and pear head ratchet socket drivers, rail clips for one fourth inch sockets socket drivers, rail clips for three eighth inch sockets socket drivers, bi metal holesaw set for metal wood boards 16 mm 64 mm, tungsten carbide rotary burrs set for metal 10 pcs, hss step drill set 3 pcs, one fourth inch standard screwdriver bit for torqset security head screws 25 mm, slotted phillips pozidriv torx hex screwdriver set with precision grip 24 pcs, internal and external circlips resettable pliers, spare tips for 2928 series resettable circlips pliers, stepped c clamps, hand riveters with 360 swivel head, hand riveters with exchangeable heads, extensible riveters for cu al and stainless steel, wire twisting pliers one hand operation, spare wheels and pins for 401 402 pipe cutters, oil filter chain wrench, rubber belt wrench, stud extraction bits with blasted finish, hand hacksaw frames 432 mm, heavy duty square guide bench vices with interchangeable jaws, superflex plastic hammers with wooden handle, multipurpose tube bender, one fourth inch air screwdrivers 800 rpm, air engraving markers with low vibration, air blow guns with brass inlet and removable safety tip, bodywork bumping hammer, optical magnifier, pivoting inspection mirror with uv and insulated semi rigid cable, telescopic swivel head mirrors 52 mm, repair mirrors with metal handle 30 mm, flexible pick up tools with steel core, magnetic pick up tool with light, flexible magnetic pullers with rubber grip 10 18 mm, screwdriver 6 slot hooks for tool panels, hexagon 12 slot l key hooks for tool panels
Agency / Dept :
council of scientific and industrial research CSIR
Due Date :
Oct 26, 2026 (13 days left)
Tender Value :
16L
View Documents
T18 Ref No : 17594602
Location : hiranagar , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for vehicle spare part - silencer pipe rear endeavour , flag rod scorpio , seat organizer scorpio , tie rod end scorpio , star box , flag rod , led light 06 pice , flag rod and star box cover , commandant plate , star plate , star steel , uj cross tata 1212 tc , speedometer sensor 12v-24v 5xton , glow plug tata sumo , head light relay sml , door handle tata 5 xton , speedometer sensor ashok leyland , heat exchanger plate oil seal packing 5xton , flexible pressure pipe , asian apocolite paint white , toggle switch , lt wire 4mm , lt wire 6mm , fuel cutoff switch solenoid tata 1212 24volt , lt wire 1.5 sqmm , lt wire 2.5 sqmm , insulation tape steelgrip , head light tube 12v , head light tube 24v , double point bulb 12v , o ring tata truck , retro reflective tape 2 inch yellow 3m , retro reflective tape 2 inch red 3m , retro reflective tape 2 inch white 3m , fuel filter tata 5 xton , fuel water separator tata 5 xton , fuel strainer tata 5 xton , battery terminal , clamp , fuse 10, 15,20,25 amp pack of 100 , fevi kwik , m seal , anabond tube , bulb 24 volt 241 pack of 10 pc , parking bulb 67 no 24v pack of 20 , hacksaw blade double , taflon tape , push button , fuel pipe tata 5 ton , tail light assy tata l-r , tail light glass tata l-r , front indicator assy aye-land , fan belt ac 6pk 115 tata safari , tail light assy reinfield , speedometer cuplor holder , pvc alluminium sheet board , paint black , paint red , bonnet shcoker scorpio , wheel nut scorpio , fuel filter m-g , gear lever kit tata 1212 , stearing pipe hose tata bus , gear shifting spring tata tc , ac unit scorpio , police sticker heavy -med-light , tactical no sticker hvy med light , formation sign hvy-med light , bridge classification sticker hvy med light , hand brake leaver 1212 tc , fuel filter assy scorpio s-10 , tube for tyre , wiper assy , water pump assy , oil filter , self carbon brush sml bus , self copper bush sml bus , self bendix pinion sml bus , solonide switch bolero , self carbon brush with plate bolero , self bendix pinion bolero , realy starter 4 pin bolero , fan belt a-l truck , thermostate valve a-l truck , disc pad tata sumo , brake master cyl scorpio , alternator fan belt sml truck , steplizer bar bush sml truck , retainer sml truck , nut with bolt sml truck , fuel cut of switch bolero , sea cover complete sml bus , door lock assy tata 5x ton , door handle outer tata 5x ton , trim pad both side with lock tata 5x ton , door lock inner catch tata 5x ton , accelarator cable with end tata 5x ton , door glass machine l side tata 5x ton , door glass machine handle tata 5x ton , flasher unit tata 5x ton , uj cross tractor , accelarator cable sml bus , flasher unit sml bus , primery chain scorpio- s-10 , primery chain adjuster scorpio , hla scorpio , chain adjuster scorpio , front disc pad scorpio , disc rotter scorpio , self solonide switch tata 1512 , car washing machine , wheel nut opener shocket size 21no , l road 18 inch, supply of all spare parts must be genuine and as per vehicle requirement
Agency / Dept :
indo tibetan border police ITBP
Due Date :
Oct 23, 2026 (10 days left)
Tender Value :
2.95L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17596994
Location : anantnag , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for wheel mechanism mpvy , nut bolt als , bonnet lock with cable mg , air filter rk plus , rubber mat 4x6mg , surface led light , spark plug mg , ignition coil mg , bolt with sleeves mg , steering cover for mg , door hinge mg , air clamp mpvy , wire wheel iron tata 2 point 5 ton , km cable for als , pneumatic booster for 4x4 als , led light 12v mg , led light 24v tata , nut with bolt mg , rubber mat 4x4 mg, wheel mechanism mpvy, wheel mechanism mpvy, nut bolt als, bonnet lock with cable mg, air filter rk plus, rubber mat 4x6mg, surface led light, spark plug mg, ignition coil mg, bolt with sleeves mg, steering cover for mg, door hinge mg, air clamp mpvy, wire wheel iron tata 2 point 5 ton, km cable for als, pneumatic booster for 4x4 als, led light 12v mg, led light 24v tata, nut with bolt mg, rubber mat 4x4 mg
Agency / Dept :
indian army
Due Date :
Oct 13, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17597791
Location : bangalore , karnataka
Source : GEM Tenders
LIVE TENDER
tender for aluminium spirit scaffold levels , centre punches with octagonal shank and hand protection , half round cabinet medium fine cut unhandled file , half round coarse medium cut unhandled file , needle file set smooth cut unhandled 160 mm 12 pcs , central nut adjustable wrenches with phosphate finish , three eighth inch square drive crowfoot open end wrenches , three eighth inch square drive crowfoot adjustable wrenches , one fourth inch square drive socket set with metric hex profile and pear head ratchet socket drivers , rail clips for one fourth inch sockets socket drivers , rail clips for three eighth inch sockets socket drivers , bi metal holesaw set for metal wood boards 16 mm 64 mm , tungsten carbide rotary burrs set for metal 10 pcs , hss step drill set 3 pcs , one fourth inch standard screwdriver bit for torqset security head screws 25 mm , slotted phillips pozidriv torx hex screwdriver set with precision grip 24 pcs , internal and external circlips resettable pliers , spare tips for 2928 series resettable circlips pliers , stepped c clamps , hand riveters with 360 swivel head , hand riveters with exchangeable heads , extensible riveters for cu al and stainless steel , wire twisting pliers one hand operation , spare wheels and pins for 401 402 pipe cutters , oil filter chain wrench , rubber belt wrench , stud extraction bits with blasted finish , hand hacksaw frames 432 mm , heavy duty square guide bench vices with interchangeable jaws , superflex plastic hammers with wooden handle , multipurpose tube bender , one fourth inch air screwdrivers 800 rpm , air engraving markers with low vibration , air blow guns with brass inlet and removable safety tip , bodywork bumping hammer , optical magnifier , pivoting inspection mirror with uv and insulated semi rigid cable , telescopic swivel head mirrors 52 mm , repair mirrors with metal handle 30 mm , flexible pick up tools with steel core , magnetic pick up tool with light , flexible magnetic pullers with rubber grip 10 18 mm , screwdriver 6 slot hooks for, rnc 111 26 gem, central nut wide opening jaw adjustable wrenches with rubber handle and phosphate finish, metric flat combination wrenches with chrome finish, imperial flat combination wrenches with chrome finish, metric lilliput combination wrenches with chrome finish, metric offset combination wrenches with chrome finish, metric combination ratcheting wrenches with chrome finish, one fourth inch square drive deep sockets with imperial bi hex profile, one fourth inch pear head reversible ratchets with 72 teeth and 5 action angle, three eighth inch square drive to one fourth inch socket decreasing adaptors, three eighth inch square drive to half inch socket increasing adaptors, three eighth inch pear head reversible ratchets with 80 teeth and 4.5 action angle, one fourth inch standard screwdriver bits for phillips screws, stubby slotted straight screwdrivers with rubber grip, slotted flat screwdrivers with rubber grip, hex bolster phillips screwdrivers with rubber grip, stubby phillips screwdrivers with rubber grip ph1 ph2, stubby pozidriv screwdrivers with rubber grip pz1 pz2, long bore hex head nut drivers with rubber grip, combination pliers with dual component handles, snipe nose pliers with dual component handles and lacquered finish, extra long snipe nose pliers with pvc coated handles and fine polish finish, grip locking pliers with curved jaws, special grips for sheet metals with nickel finish, grip locking pliers with long and slim jaws, wire twisting pliers with phosphate finish, pipe cutters, aluminium pen reamer, plastic pen reamer, aluminium wheel reamer, plastic wheel reamer, flexible magnetic pullers with rubber grip, collapsible magnetic pick up tool with light, non sparking centre punches aluminium bronze, rectangular aluminium profile spirit levels 2 vials, aluminium spirit scaffold levels, centre punches with octagonal shank and hand protection, half round cabinet medium fine cut unhandled file, half round coarse medium cut unhandled file, needle file set smooth cut unhandled 160 mm 12 pcs, central nut adjustable wrenches with phosphate finish, three eighth inch square drive crowfoot open end wrenches, three eighth inch square drive crowfoot adjustable wrenches, one fourth inch square drive socket set with metric hex profile and pear head ratchet socket drivers, rail clips for one fourth inch sockets socket drivers, rail clips for three eighth inch sockets socket drivers, bi metal holesaw set for metal wood boards 16 mm 64 mm, tungsten carbide rotary burrs set for metal 10 pcs, hss step drill set 3 pcs, one fourth inch standard screwdriver bit for torqset security head screws 25 mm, slotted phillips pozidriv torx hex screwdriver set with precision grip 24 pcs, internal and external circlips resettable pliers, spare tips for 2928 series resettable circlips pliers, stepped c clamps, hand riveters with 360 swivel head, hand riveters with exchangeable heads, extensible riveters for cu al and stainless steel, wire twisting pliers one hand operation, spare wheels and pins for 401 402 pipe cutters, oil filter chain wrench, rubber belt wrench, stud extraction bits with blasted finish, hand hacksaw frames 432 mm, heavy duty square guide bench vices with interchangeable jaws, superflex plastic hammers with wooden handle, multipurpose tube bender, one fourth inch air screwdrivers 800 rpm, air engraving markers with low vibration, air blow guns with brass inlet and removable safety tip, bodywork bumping hammer, optical magnifier, pivoting inspection mirror with uv and insulated semi rigid cable, telescopic swivel head mirrors 52 mm, repair mirrors with metal handle 30 mm, flexible pick up tools with steel core, magnetic pick up tool with light, flexible magnetic pullers with rubber grip 10 18 mm, screwdriver 6 slot hooks for tool panels, hexagon 12 slot l key hooks for tool panels
Agency / Dept :
council of scientific and industrial research CSIR
Due Date :
Oct 26, 2026 (13 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17518213
Location : ernakulam , kerala
Source : GEM Tenders
LIVE TENDER
tender for 26kgrc002 - eg5049v 0000921705 , eg5049v 027 1028 , eg5049v 027 1029 , eg5049v 030 1136 , eg5049v 030 1144 , eg5049v 030 1134 , eg5049v 034 1387 , eg5049v 034 1389 , eg5049v 050 1003 , eg5049v 050 1004 , eg5049v 050 1003a , eg5049v 055 03 1459 , eg5049v 055 1441 , eg5049v 055 1449 , eg5049v 055 1452 , eg5049v 055 1456 , eg5049v 055 1469 , eg5049v 059 1004 , eg5049v 073 1129 , eg5049v 074 1144 , eg5049v 100 01 1006 , eg5049v 103 1002 , eg5049v 103 1001 , eg5049v 103 1004 , eg5049v 103 1006 , eg5049v 103002 a2 , eg5049v 103002 f , eg5049v 103002 g , eg5049v 103002 h , eg5049v 103002 q , eg5049v 103002c , eg5049v 111 03 1140 , eg5049v 111 1125 , eg5049v 111 1130 , eg5049v 111 1134 , eg5049v 111 1136 , eg5049v 112 02 1102 , eg5049v 112 1089 , eg5049v 112 1092 , eg5049v 112 1093 , eg5049v 112 1096 , eg5049v 112 1081 , eg5049v 112 1083 , eg5049v 113 1145 , eg5049v 113 1146 , eg5049v 113 1147 , eg5049v 113 1149 , eg5049v 113 1151 , eg5049v 113 1152 , eg5049v 114 1145 , eg5049v 114 1150 , eg5049v 114 1142 , eg5049v 160 1016 , eg5049v 160 1017 , eg5049v 160 1019 , eg5049v 161 1005 , eg5049v 161 1007 , eg5049v 161 1008 , eg5049v 161 1013 , eg5049v 161 1010 , eg5049v 200 1141 , eg5049v 200.01.cpl , eg5049v 201 1004 201 1005 , eg5049v 201 1014 , eg5049v 203 1035 , eg5049v 203 1039 , eg5049v 215 1136 , eg5049v 215 1245 , eg5049v 221 01 1011 , eg5049v 221 1003 , eg5049v 221 1003 1004 , eg5049v 221 1006 , eg5049v 221 1008 , eg5049v 221 1015 , eg5049v 221 1016 , eg5049v 221 1017 , eg5049v 221 1018 , eg5049v 221 1019 , eg5049v 221 1021 , eg5049v 221 1023 , eg5049v 221 1024 , eg5049v 221 1025 , eg5049v 225 1002 , eg5049v 280 1010 , eg5049v 289 07 1269 , eg5049v 289 1093 , eg5049v 289 1094 , eg5049v 289 1095 , eg5049v 289 1096 , eg5049v 289 1097 , eg5049v 289 1101 , eg5049v 300 1119 , eg5049v 310 1001 , eg5049v 322 1002 , eg5049v 322 1006 , eg5049v 3353200022 , eg5049v 350 05 1265 , eg5049v 350 1251 14 , eg5049v 350 1259 , eg5049v 350 1270 , eg5049v 350 1303 , eg5049v 350 1306 , eg5049v 350 1316 , eg5049v 350 1319 , eg5049v 350 1324 , eg5049v 350 1500 , eg5049v 350 1252 , eg5049v 350 1253 , eg5049v 350 1266 , eg5049v 350 1288 , eg5049v 350 1289 , eg5049v 350 1307 , eg5049v 350 1322 , eg5049v 350 1328 , eg5049v 400 1080 , eg5049v 407 1012 , eg5049v 409 1030 , eg5049v 409 02 1031 , eg5049v 419 1024 , eg5049v 419 1023 , eg5049v 419 1022 , eg5049v 430 1081 , eg5049v 430 1087 , eg5049v 440 1026 , eg5049v 440 1037, fuel filter element, sleeve spring, bolt for sleeve spring, pin with tap hole, set of bearing halves, cotter pin, oil scrapper ring, clamping plate, ring sealing, ring buna round, seal ring cu, valve seat ring, cylinder cover, pin cotter, seal for cyl head, seal for cooling water passage, cylinder head assy, strip sealing, gasket, bolt hex, collar bush, cam outlet, inlet cam, nut, fuel cam, brake lining, bearing(skf equivalent), bearing, bearing (skf equilant), spring, bush, pin taper, screw hex head, bolt (pin for roller)for control lever, bolt, bellows, seal 5d-14104, covering plate, cowl, tappet, push rod, roller pin, key fitting, clamping piece, screw hollow, screw hex head with pin, piece thrust, ring snap, lock washer, outer valve cone, piston, thrust spring, spring plate, spring thrust, ring round, pump fuel injector complete, bush & roller, shim set, bush collar, bush for gear wheel, gear wheel, pressure spring, nozzle fuel needles with guide, nozzle needle &guide, ring seal round, washer, filter pin, washer for injector, spring for cooled fuel needle, fuel delivery pipe with socket, nozzle with orifices, nozzle with orifice, valve fuel needle, seal ring, seal, screw hex head for exhaust piping, nut hex m1586-mm 127, hex head screw, filter duplex luboil, gasket inter cooler cover, cover, spare kit, slide ring joint, ring butting, stud pos-24, bearing ball deep groove, bearing cover, bearing ball grooued, notched taper pin, butting ring, pump cooling water, butting ring(pos-15), ring(pos-16), simmer ring(pos-37), seal(pos 69), round cord seal(pos-70), key, locking ring, cord seal (pos-159), coupling, gauge charging air pressure 0 to 1 kg, thermocouple temp sensor, angular thermocouples, ring sealing for indicator cock, screw collar, ring sealing m618-14x21x3cu), seal gasket, gasket for start air distributor, thermometer 0 to 100 c, valve lub oil pressure maintance regulating
Agency / Dept :
indian navy
Due Date :
Nov 09, 2026 (27 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17520397
Location : lucknow , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for main fire pump , diesel driven pump , jockey pump , terrace pump , control panel , starter , m s pipe , s and fixing internal hydrant valve , supply and fixing of external yard hydrant valve , sfc of butterfly valve , s and fixing of orifice plate , pitc non return valve , pitc of stainless steel y strainer , s and fixing of 15 m hose pipe , s and fixing first aid hose reel , s and fixing 63 mm dia gun metal short branch pipe , s and fixing of fire brigade connection , foot valve , air vessel , pressure switch , pressure gauge , installation control valve of cast iron body , s and f of hose cabinet , cutting holes , supply of cable , laying of cable , s and m end termination , s and f fire cable , cable tray , g i plate earthing , p and f gi strip , gi strip for looping , p and f gi earth wire , p and f gi pipe, supply installation testing and commissioning of firefighting with wet riser system, sh 1 wet riser system main fire pump a supplying, installation, testing and commissioning of electric driven main fire pump conforming to is 12469 2019 suitable for automatic peration and consisting of following complete in all respects as required. b horizontal type multistage centrifugal split casing pump of cast iron body and bronze impeller with stainless steel shaft fire pump capable for delivery of 2280 lpm against atotal head of 70 mtrs approximately while running at 1450 1500 rpm mechanical seal as required bsnl approved make. c suitable hp squirrel cage induction motor tefc synchronous speed 1500 rpm suitable for operation on 415 volts 3 phase 50 hz ac supply with ip 55 protection for enclosure horizontal foot mounted type with class. f insulation conforming to is 12615 2018. d m.s. fabricated common base plate coupling,coupling guard, foundation bolts etc. as required. e suitable cement concrete foundation duly plastered with anti vibration pads note the head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point. the pump room is situated on the underground water tank. 2280 lpm at 70 m head, diesel driven pump a supplying, installation, testing and commissioning of die sel engine driven main fire pump conforming to is 12469 019 suitable for automatic operation and consisting of following, complete in all respects, as required diesel driven pump b horizontal pe, stage, centrifugal pump of cast of iron body and bronze peller with stainless steel shaft, mechanical seal suitable to delivering 2280 lpm against atoatl head of 70 mtrs approxi as required.c suitable hp, 1500 rpm water cooled with radiator, diesel engine conforming to relevant is standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe xtended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential ilencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.d. m.s fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as quired. e suitable cement concrete foundation duly plastered and with anti vibration pads. note the head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point. the pump room is situated on the underground water tank. 2280 lpm at 70 m head., jockey pump a supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to is 12469 2019 suitable for automatic operation and consisting of following, complete in all respects as required jockey pump b horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c)suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase 50 hz ac supply with ip 55 class of protection for enclosure, horizontal foot mounted type with class f insulation, conforming to is 12615 2018. d m.s. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) suitable cement concrete foundation duly plastered and with anti vibration pads. note the pump room is situated on the underground water tank. 180 lpm at 70 m head, supplying, installation, testing and commissioning of electric driven terrace pump conforming to is 12469 2019 suitable for automatic operation and consisting of following, complete in all respects, as required terrace pump. b horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. c suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase, 50 hz, ac supply with ip55 class of protection for enclosure, horiziontal foot mounted type with class f insulation, conforming to is 12615 2018. d m.s.fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. e suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m head., control panels fabrication supply installation testing and commissioning of electrical control panel of cubical construction floor mounted type fabricated out of 2mm thick crca, artmentalised with hinged lockable doors, dust and vermin proof powder coated of approved shade after 7 tank treatment process, cable alley, inter connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring earth terminals, numbering etc. complete, suitable for main fire pump, pressurisation pump and diesel pump set complete as per cpwd specification with following in coming and outgoings, suitable for operation on 415v, 3 phase, 50hz ac supply with enclosure protection class ip 42 as required. incoming 250a, 50ka 4 pole mccb, ic equal to 100 percent icu rating digital voltmeter 0 500v with selector switch digital ammeter 0 250 a with selector swtich and cts etc. led type ryb phase indicating lamps, on, off, trip indicating lamps set of copper bus bar 300a. outgoing note all outgoing feeders for pumps should have digital ammeter with selector switches, and led type on, off, trip indicating lamps main fire pump 125 a, 50katpn mccb, ics is equal to 100 percent icu, with fully automatic star/delta starter suitable for 60 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/off operation. jockey pump jockey pump 63 a, 50ka tpn mccb, icsis equal to 100 percent icu, with suitable hp fully automatic star/delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, note may please be see at atc of special repair no. 5, supply installation testing and commissioning of fully automatic dol starter for terrace pump terrace pump siutable for operation on 3 phase 415 volt ac supply i/c making inter connection testing etc as requiored at site., sh ii pipes and accessories. providing laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per is 10221, refilling the trench etc. of following sizes complete as required. 150 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 50 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 80 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.100 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 150 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 200 mm dia wall thickness 6.3 mm, supplying and fixing single headed internal hydrant valve with instantaneous gunmetal/stainless steel coupling of 63 mm dia with cast iron wheel isi marked conforming to is 5290 type a with blank gunmetal/stainless steel cap and chain as required.single headed gunmetal, supplying and fixing single headed external yard hydrant valve with 1 no. 63 mm dia instantaneous fm gunmetal/stainless steel coupling and cast iron wheel, isi marked, conforming to is 5290 type a with blank gunmetal/stainless steel cap and chain as required. single headed gunmetal, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required . 50mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .80 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .100 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .150 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .200 mm dia, supplying and fixing orifice plate made out of 6 mm thick stainless steel grade 304 with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required., providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 50mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 80 mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 100 mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 150 mm dia., providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange. 80 mm dia, providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange.150 mm dia, providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange. 200 mm dia, supplying and fixing 63 mm dia, 15 m long rrl hose pipe with 63 mm dia male and femalecouplings duly bound with gi wire, rivets etc. conforming to is 636 type a as required. gun metal, supplying and fixing first aid hose reel with ms construction spray painted in post office red,conforming to is 884 complete with the following as required. a 20 mm nominal internal dia water hose thermoplastic textile reinforced type 2 as per is 12585 b 20 mm nominal internal dia gun metal globe valve and nozzle. c drum and brackets for fixing the equipmets on wall. d connections from riser with 25 mm dia stop gun metal valve and m.s. pipe and socket. 30 mtrs, supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to is 903 suitable for instantaneous connection to interconnect hose pipe coupling as required. gun meta, supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd for suitable dia ms pipe connection conforming to is 904 as required. 2 way 100 mm dia m.s. pipe, supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd for suitable dia ms pipe connection conforming to is 904 as required. 4 way 150 mm dia m.s. pipe, providing, installation, testing and commissioning of c.i flanged swing type foot valve isi marked of following sizes confirming to is 4038 complete with all acessories complete etc as required.200 mm dia, supplying and fixing air vessel made of 250 mm dia, 8 mm thick ms sheet, 1200 mm in height with airrelease valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required., providing and fixing of pressure switch in m.s. pipe line including connection etc. as required., providing and fixing in position industrial type pressure gauge with gun metal / brass valves complete etc. as required., providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, ms pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required. 150 mm dia, supplying and fixing of hose cabinet of size 750x mm x 600 mm x 250 mm made of 2 mm thick ms sheet with 6 mm thick glazed glass doors i/c necessary locking arrangement suitable to accommodate external hydrant with butterfly valve , 2 nos . 15 mtr. long hose pipe, 1 no branch pipe, mounted on wall or raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect , for external hydrant ,as required., cutting holes up to 15x15 cm in r.c.c. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1 2 4 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size, including finishing complete so as to make it leak proof., sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988. 4 core 16 sqmm, sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988 . 3.5 core 25 sq. mm, sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988. 3.5 core x 70 sq. mm, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. upto 35 sq. mm clamped with 1mm thick saddle, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. above 35 sq. mm and upto 95 sq. mm clamped with 25 mm and 3mm ms flat clamp., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. above 185 sq. mm and upto 400 sq. mm clamped with 40mm and 3mm ms flat clamp, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required. upto 35 sq. mm clamped with 1mm thick saddle., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required.above 35 sq. mm and upto 95 sq. mm clamped with 25mm and 3mm ms flat clamp., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required.above 185 sq. mm and upto 400 sq. mm clamped with 40mm 3mm ms flat clamp, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.upto 35 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.mm above 35 sq. mm and upto 95 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.above 185 sq. mm and upto 400 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. upto 35 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. above 35 sq. mm and upto 95 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. above 185 sq. mm and upto 400 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 4 core 16 sq. mm size 28mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 25 sq. mm size 28mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 70 sq. mm size 38mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 300 sq. mm size 70mm, supplying and laying of 2core 1.5 sqmm fire alarm armoured cable, 600/1000v rated with annealed copper conductor having xlpe insulation, steel wire armouring and frls/hffr outer sheath complete as required., supplying and installaton following size of perforated painted with powder coating m.s. cable trays with perforation not more than 17.5 percent, in convenient sections, joined with connectors, suspended from the ceiling with two numbers ms/gi suspenders including base of suitable size ms/gi angle, bolts and nuts, painting suspenders, fastener etc as required. 100 mm wide , 50 mm depth , 1.6 mm thickness, earthing with g.i. earth plate 600 mm length x 600 width and 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal / coke and salt as required., providing and fixing 25 mm wide and 5 mm thick g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut, bolt, spring, washer excavation and re filling etc. as required., providing and fixing 25 mm wide and 5 mm thick g.i. strip on surface or in recess for connections etc. as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., providing and fixing following sizes g.i. pipes complete with g.i. fittings including trenching and refilling etc. 80 mm dia nominal bore
Agency / Dept :
bharat sanchar nigam limited BSNL
Due Date :
Oct 22, 2026 (9 days left)
Tender Value :
59.95L
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Wheel Lock Clamp. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Wheel Lock Clamp sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Wheel Lock Clamp Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Wheel Lock Clamp, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Wheel Lock Clamp Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Wheel Lock Clamp Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Wheel Lock Clamp.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Wheel Lock Clamp depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Wheel Lock Clamp Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Wheel Lock Clamp bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Wheel Lock Clamp. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Wheel Lock Clamp, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Wheel Lock Clamp, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Wheel Lock Clamp?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Wheel Lock Clamp tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Wheel Lock Clamp?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Wheel Lock Clamp, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Wheel Lock Clamp is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All