sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

41Latest Water sampling equipment Tenders List

Latest Water sampling equipment Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Water sampling equipment tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Water sampling equipment tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Water sampling equipment Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Water sampling equipment tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Water sampling equipment Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Water sampling equipment Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Water sampling equipment Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Water sampling equipment tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Water sampling equipment Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Water sampling equipment sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Water sampling equipment tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Water sampling equipment tenders.

Is EMD mandatory for all Water sampling equipment tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Water sampling equipment work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Water sampling equipment tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Water sampling equipment Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17333433
Location : bangalore , karnataka
Source : GEM Tenders
NEW TENDER
tender for laboratory apparatus and equipment to myanmar measuring cylinder 50 ml , measuring cylinder 100 ml , measuring cylinder 250 ml , measuring cylinder 500 ml , conical flask 50 ml , conical flask 100 ml , conical flask 250 ml , conical flask 500 ml , beaker 50 ml , beaker 100 ml , beaker 250 ml , beaker 500 ml , 5 ml beaker , 10 ml beaker , 25 ml beaker , 50 ml beaker , 100 ml beaker , 150 ml beaker , 250 ml beaker , 500 ml beaker , 1000 ml beaker , 5 ml measuring cylinder , 10 ml measuring cylinder , 25 ml measuring cylinder , 50 ml measuring cylinder , 100 ml measuring cylinder , 250 ml measuring cylinder , 500 ml measuring cylinder , 1000 ml measuring cylinder , separating funnel, pear shape with glass stopcock ic glass stopper , glass filter funnel shortstem , 150 ml conical flask , 250 ml conical flask , 10 ml graduated pipette with bulb , 25 ml graduated pipette with bulb , 100 ml volumetic flask , 250 ml volumetic flask , plastic wash bottle 500 ml , glass motar and pestle inside rough , 100 ml reagent bottle , 250 ml reagent bottle , 500 ml reagent bottle , 1000 ml reagent bottle , 10 ml tilt measure , soxlet extraction apparatus set , graham coiled condenser with drip tip , friedrich coiled condenser with drip tip , chromatography columns plain with glass stopcock , desiccator set with cover porcelin plate , plastic knob , crystallzing dishes , drying trays , flat bottom evaporating dishes , distilling apparatus with graham condenser, interchangeable joints and stopper , essential oil determination apparatus clevenger apparatus, as per is 1797 , rectangular museum jar with lid , viscometer college pattern oswal 80 to 100 seconds uncertified , sline petri dishes , tongs for beakers flasks , specific gravity bottles , glass filter holder , chromatography columns 200 mm , chromatography columns 450 mm , chromatography columns 500 mm , chromatography columns 600 mm , chromatography columns 1,000 mm , separating funnel 250 ml , separating funnel 1,000 ml , separating funnel 2000 ml , volumetric pipette 5 ml , centrifuge tubes 15ml , centrifuge tubes 50ml , capillary tubes , bod bottle cap 60 ml , bod bottle cap 125 ml , bod bottle cap 300 ml , sediment core sampler, type beeker water sampling equipment , sieves , micropipette , micro pipette stand , fume hood, as per enclosed specification or atc document
Agency / Dept :
hmt machine tools limited
Due Date :
Oct 08, 2026 (19 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17323782
Location : maligaon , assam
LIVE TENDER
tender for supply, installation, calibration and training of digital triaxial shear apparatus, supply, installation, calibration and training of digital triaxial shear apparatus suitable for u u, cu and cd tests, comprising: 1. motorised load frame ? capacity 50 kn with multi-rate strain control, su itable for triaxial cells up to 100 mm dia specimens. turret type geared drive with approx. 30 strain rates r anging from 6 mm/min to 0.00048 mm/min. front panel controls. operable on 220v, 50 hz, single phase su pply. 2. triaxial cell ? suitable for 38 mm dia ? 76 mm high specimens with lateral pressure up to 1000 kpa , having ports for cell pressure, pore pressure, top and bottom drainage and fitted with no-volume-change valves. complete with loading pad, porous stones, sheath stretcher, split sand former, latex membranes, s ealing rings and all standard accessories. additional triaxial cell for 50 mm dia specimen to be supplied. 3. pneumatic control panel (2-line type) with precision regulators for confining and back pressure control, cap acity approx. 10.5 kg/cm?, complete with mechanical volume change apparatus. 4. air compressor ? single stage, suitable up to 10 kg/cm? with receiver tank, on/off switch, pressure gauge and outlet valve, opera ble on 220v, 50 hz single phase supply. 5. de-airing system with vacuum arrangement comprising vacuu m regulator, 20 litre water chamber, vacuum gauge and additional vacuum line. vacuum pump flow approx . 75 l/min, vacuum up to 22 in hg (554 mm hg), pressure up to 40 psig. 6. electronic data acquisition syst em with touch panel operation for tare, start/stop, programming etc., independent channel taring, prog rammable data logging interval (10 sec to 1 hr), automatic data saving, storage of minimum 25 test sets wi th 200 data points each, sample id programming, date/time recording and online data transfer to computer through ethernet port. 7. sensors & instrumentation: i. load sensor ? 1000 kg capacity ii. pressure transdu cer ? 2000 kpa iii. lvdt stroke ?20 mm iv. linearity ?1%, repeatability ?0.1%, hysteresis ?0.5% v. excitati on: 2v rms, 2 khz sinusoidal vi. sensitivity: 1 mv/v/mm vii. operating temperature: 0?50?c 8. software for online data acquisition and offline triaxial analysis for uc, uu, cu, cu-bar and cd tests with manual/autom atic recording. software shall calculate dry density, moisture content, void ratio, saturation etc. and generat e consolidation, stress-strain, pore pressure, effective stress, p-q and related plots along with evaluation of t100, strain rate and shear parameters (c & φ). 9. accessories & miscellaneous: i. sampling moulds for stan dard triaxial specimen sizes ii. sample preparation moulds iii. volume change gauge/burette iv. pressure in dicator/transmitter v. de-aired water apparatus vi. all interconnecting tubing, fittings and accessories vii. a ny other component required for complete operation. make: aimil / heico or similar better. the rate also inc ludes- a. supply and installation of the machine to geotechnical laboratory/construction, nf railway, malig aon, guwahati, pin-781011. b. necessary fixing of footing, bolts, grooving, concreting, water connection, bo lting & shifting of equipment to installation and fix the apparatus inside geotechnical laboratory/con, nfr, malig aon, guwahati. c. 1st year calibration of the equipment as per nabl standard. d. first hand training of nf r ailway official on use of the equipment as per latest relevant code of railway/is standard at maligaon, guw ahati, pin-781011. e. supply of latest guidelines (rdso/iricen/is code etc.) related to the use of the equip ment. - warranty period: 12 months after the date of delivery
Agency / Dept :
northeast frontier railway NFR
Due Date :
Sep 23, 2026 (4 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17101949
Location : tilhar , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for ground water testing , ambient air testing , stack emission testing , noise level test , waste water sampling , team and equipment mobilisation, environment monitoring services at shahjahanpur depot, ground water testing, ambient air testing, stack emission testing, noise level test, waste water sampling, team and equipment mobilisation
Agency / Dept :
bharat petroleum corporation limited BPCL
Due Date :
Sep 25, 2026 (6 days left)
Tender Value :
1.91L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17299502
Location : sonapur , assam
Source : GEM Tenders
LIVE TENDER
tender for suction apparatus , ecg machine , shadow less lamp , office table with drawer , revolving chair for mos , office chair with arm , examination table with couch , almirah ss , dressing trolley , bowel ss , tray kidney ss , bucket ss , heamatology analyser , colour specific bins for bio medical waste management , chart holder , case sheet holder , pharmacy freezer , defibrillator , water dispenser , waiting room chair set of three, hospital equipment and items, portable suction machine electrically operated for medical use to maintain airway by removing secretions. compact portable unit housed in sturdy abs plastic molded casing provided with carrying handle and storage space for suction hose. solid base to keep unit stationary during operation. equipped with built in bourdon tube type vacuum gauge size 5 cm diameter range 0 to 760 mm hg and vacuum regulator. suction capacity 10 to 20 liters per minute and maximum vacuum 450 mm hg or more. single jar configuration with 1000 ml capacity reusable autoclavable polycarbonate jar having graduated markings. provided with mechanical overflow protection system trap filter non collapsible transparent silicon suction tubing inner diameter 8 mm length minimum 1 meter and power cable. noise level at maximum vacuum 55 db or less and equipment weight 6 kg or less. power supply requirements 230 v 50 hz ac. electrical safety compliant to iec 60601 1 2 or bis equivalent and product standard conformity to is 18375 part 1 latest. manufacturing unit certified to iso 13485 latest standard and compliant to medical device rules mdr 2017 with valid cdsco license. minimum warranty shall be 1 year., 3 channel electrocardiography ecg machine for non invasive examination of heart electrical activity. operating modes include automatic manual and rhythm with ecg lead annotation facility. system can acquire simultaneously and interpret 12 leads for adult and pediatric patients. equipped with lead fail and lead reversal indication. acquisition time 10 seconds. real time colour backlit 5 inch lcd display screen with resolution 640 by 480 pixels showing ecg waveforms with signal quality indication. equipped with artifact ac and low and high pass frequency filters. internal memory to store 151 to 200 ecgs. features full screen preview of ecg report prior to print and hard keys alphanumeric keyboard for patient data entry. latest interpretation software included for amplitudes duration and morphologies analysis. built in thermal printer with paper size 80 mm by 20 meter recorder speed 25 mm per second and digital array resolution 200 dpi by 500 dpi. built in rechargeable battery with capacity for 30 ecgs or 30 minutes continuous rhythm recording on single charge. individual patient lead replaceable without changing complete cable assembly. operating temperature 10 to 40 degree celsius and relative humidity 15 to 90 percent. power supply requirements 220 to 240 v ac 50 hz with indian plug. supplied with 12 lead ecg machine patient cables set of adult chest electrodes power cable clip electrodes and compatible trolley. compliant to safety standards is 13450 part 2 sec 25 or iec 60601 2 25. manufacturing unit certified to iso 13485 latest standard and compliant to medical device rules mdr 2017 with valid cdsco license. minimum warranty shall be 1 year., examination light for medical use with mobile stand mounting option and wheel locking provision. features led light source with correlated colour temperature range 4501 to 6500 k colour rendering index cri 80 to 100 and minimum led life 50000 hours. working distance 100 to 400 mm minimum light intensity 50000 lux and spot size 60 to 150 mm. equipped with continuous dimming levels touchless on off control and goose neck extension provision. power supply requirement 220 v 50 hz with power consumption 7 to 150 w and power chord length minimum 1 meter. electrical safety compliant to iec 60601 or bis equivalent and manufacturing unit certified to iso 13485 latest standard. product shall comply with medical device rules mdr 2017. comprehensive warranty shall be minimum 3 years., table for medical officer in rectangle shape with engineered wood table top material and iron table base material with drawer storage facility. dimensions are width 60 inches depth 30 inches and height 30 inches., high back revolving chair of adjustable height with wheels provided with centre tilt mechanism and pneumatic gas lift mechanism for height adjustment. seat features cushion with polyester fabric upholstery in black colour. minimum seat height is 400 mm with minimum height adjustment range of 100 mm. backrest is high back and high width in black colour with lumbar support headrest and tilting lock facility. headrest is tilt adjustable with padding. armrest is adjustable type with padding. product comes with minimum 1 year warranty., the required item is a general purpose chair q2 category featuring a sturdy cantilever understructure with a curved frame underneath the seat. it comes with a mid back height ranging between 400 mm to 700 mm and a medium backrest width between 550 mm to 700 mm. the backrest material is fully covered across its entire height designed in a black colour family and includes built in lumbar support for ergonomic comfort. the chair seat is equipped with a comfortable cushion upholstered in high quality leather material maintaining a minimum seat height of 400 mm and finished in a black colour family. additionally the chair is equipped with fixed armrests featuring integrated cushioning for enhanced arm support. the item must carry a minimum of 1 year standard warranty., treatment couch examination couch dressing table for patient examinations and medical procedures. manual type 2 section configuration with maximum load weight capacity upto 320 kgs. height elevation hydraulic manual from 400 mm to 1200 mm. total length 1200 mm to 2200 mm table top width 450 mm to 1000 mm head section length 400 mm to 1000 mm and leg section length 700 mm to 1200 mm. head tilt angle range 10 to 75 degree with manual foot section adjustment. frame made of mild steel material with removable drainage system and mattress fitting type tighten with belt. manufacturing unit certified to iso 13485 latest standard and compliant to medical device rules mdr 2017. comprehensive warranty shall be minimum 2 years., free standing almirah made of iron base material. features two plain doors of base material with front door lock and front door handle facility. dimensions are height 84 inches width 72 inches and depth 18 inches. item shall be assembled by seller at consignee premises site at no extra cost., dressing trolley used for dressing purpose at bedside in hospital wards or dressing rooms. framework made of electric resistance butt welded erw steel tube with tube thickness 1 point 2 mm and tube diameter 25 point 40 mm for vertical and 19 point 05 mm for horizontal. equipped with stainless steel shelves conforming to is 4033 latest. pivot bar rings and disc made of mild steel cold rolled. railing provided on three sides made of chromium plated over nickel conforming to grade b of is 1068 latest. trolley manufacturing conforms to is 4769 latest and finishing as per is 4033 latest. dimensions 660 mm length by 430 mm width by 830 mm height. provided with provision for receiving waste pail brackets for accommodating wash bowl of 200 mm top diameter and brackets for instrument tray of 200 by 150 by 50 mm. mounted on 4 castor wheels with anti static rubber tread each having 50 mm diameter. packing and marking as per is 4033 latest. manufacturing unit certified to iso 13485 latest standard and compliant to medical device rules mdr 2017. warranty shall be 2 years., stainless steel punch bowl round shape with mirrored finish. capacity 4000 milliliter top diameter 10 point 17 centimeter and height 5 inch. made of stainless steel material and dishwasher safe., kidney tray used in surgical procedures for carrying dressing bandages small instruments soiled dressing and other medical waste. reusable and autoclavable made of stainless steel material. dimensions 300 mm length by 130 mm width by 60 mm height. shape dimensions tolerance workmanship and finish strictly conforming to is 3992 latest revision. packing and marking as per is 3992 latest revision and mdr. manufacturing unit certified to iso 13485 latest standard and compliant to medical device rules mdr 2017 with valid cdsco license or registration. minimum warranty shall be 2 years., stainless steel bucket with nominal capacity of 18 litres size 325 mm made of stainless steel material. general workmanship and finish shall be of high standard with no sharp edges mirror finish and free from distortion dents wrinkles and surface defects. bucket shall not rock when placed on flat surface. warranty shall be minimum 1 year., 5 part automated hematology analyser closed benchtop fully automatic system with 5 year warranty. based on principle of counting and sizing for 5 part wbc differential without retic and nrbc enumeration capability. discrete analysis modes available cbc and cbc diff. analysis method for wbc is tri angle laser flow cytometry rbc and platelet measurement by electrical impedance and hemoglobin measurement by cyanide free colorimetry. equipment features automatic start up shut down sample analysis clot detection probe wipe auto dilution and double bathing mechanism. maximum sample aspiration volume 50 micro litres or less and throughput capacity 50 to 60 samples per hour. provided with pc based data management led display 500 gb hdd 4 gb ram 17 inch monitor and external black and white laser printer. includes online ups rating 0 point 5 kva with 30 minute backup time. supplied with consumables required for carrying out haematological testing of 500 samples. compliant to medical device rules 2017 iso 13485 and iec en 60601 1 electrical safety standards., 30l pp waste bin in solid green. features a foot pedal lid and built in handle for sanitary waste management. designed without wheels or drain plug for stable, stationary use, exam pad for patient chart holder made of plastic material with metal punchless clip mechanism ideal for a4 size sheets. features transparent glossy surface finish with rubberized corners. dimensions shall be length 35 cm width 22 cm thickness 3 mm and net weight 120 grams., notepad holder shall be used as case sheet holder for patient made of synthetic leather material in dark brown colour suitable for a5 standard size. dimensions shall be length 25 centimeter width 9 centimeter and weight 100 gram. item shall have iso certification and warranty shall be minimum 1 year., ultra low temperature laboratory vertical deep freezer 320 litre capacity for storage of biological samples with 1 year warranty. constructed with galvanised steel body tough powder coated exterior finish stainless steel inside chamber and 100 mm ground clearance. features heavy duty lockable castors levelling adjustments double door with locking lids vip with green puf panels 5 inner storage compartments with insulated doors and adjustable height. uses cfc free hcfc free non flammable refrigerants with 2 compressors pull down time 5 point 2 hours operating temperature minus 10 degree c to minus 40 degree c and capability to attain minus 80 degree c at ambient temperature of 32 degree c. equipped with fully programmable microprocessor control system membrane keypad digital temperature display battery backup for display heated air vent washable condenser filter and decompression valve. includes audible and visible alarms for temperature rise power failure system failure and low battery with noise level 58 db. supplied with 1 pair of cryogloves and 1 ice scraper. compliant to ce standards iso certification and iec 61010 electrical safety standards., defibrillator featuring biphasic technology with automated external defibrillation and manual modes for adult and pediatric patients with 5 year warranty. equipped with tft or lcd display screen of 6 inches or more displaying 2 waveforms ecg trace selected energy and delivered energy. maximum energy selection up to 360 joules or more with synchronized cardioversion and external non invasive pacing in demand and fixed modes. provides 5 lead ecg monitoring with user selectable alarm settings. operates on mains as well as inbuilt rechargeable li ion battery capable of delivering 100 or more shocks at maximum energy with charging time 7 seconds or less. features automatic and manual self test mechanisms with code ready indicator and capability for transport on ground ambulance. standard accessories include 1 li ion battery 1 ecg cable 1 multi function defibrillator monitoring pads gel sheet and 10 recorder paper rolls. compliant to medical device rules 2017 iso 13485 and iec 60601 electrical safety standards., reverse osmosis based point of use water treatment system for drinking purposes as per is 16240 isi marked freestanding type. filtration capacity 20 lph and above with actual filtration capacity 20 lph. additional water purification stages include ultraviolet disinfection sediment filter carbon filter normal water dispensing cold water dispensing and hot water dispensing. guaranteed output water quality as per is 10500 or better for feed water tds upto 2000 ppm. storage tank made of abs pp food grade material with capacity 20 liters. power supply 230 v single phase with auto cut off controller. scope includes standard installation commissioning and comprehensive warranty minimum 1 year., waiting area public place 3 seater chair with seat only configuration having armrest and backrest. material of chair mainframe ss 304 with thickness 2 point 5 to 3 point 0 mm and cold rolled steel base legs with powder coated 70 microns finish. chair seat and backrest made of mild steel material with thickness 1 point 0 to 1 point 5 mm in silver grey color. armrest provided at extreme ends made of mild steel material. overall length minimum 1100 mm overall height minimum 750 mm minimum floor to seat height 400 mm seat depth minimum 450 mm and seat width minimum 485 mm. warranty shall be minimum 12 months.
Agency / Dept :
indo tibetan border police ITBP
Due Date :
Oct 07, 2026 (18 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16313198
Location : kolkata , west bengal
Source : GEM Tenders
tender for workshops equipment ss pad lock rubber mets and foal items - g3_43_glass storage bottle for lub oil , g3_44_blanks for firemain pumps 150tph , g3_45_blanks_sea water cooling pump 250tph , g3_46_blanks for ac sea water pumps , g3_47_blanks for ac chilled water pumps , g3_48_battery for torches _big , g3_49_battery for torches _small , g3_50_snap on for replcemnt ear plug_glass40-1 , g3_51_steel putiy , g3_52_valvoline premium blue 7800 plus de oil , g3_53_dyson v11 absolute pro w- battery and acces. , g3_54_tarpaulin cover for gt,da intake and exhaust , g3_55_refrigerant removal kit , g3_56_100 nb rubber bellow , g3_57_125 nb rubber bellow , g3_58_strainr elemnt_200nb_90-10 cuni,mesh 6mm , g3_59_strainr elemnt_150nb_90-10 cuni,mesh 6mm , g3_60_strainr elemnt_100nb_90-10 cuni,mesh 6mm , g3_61_strainer elemnt_80nb_90-10 cuni,mesh 6mm , g3_62_strainer elemnt_50nb_90-10 cuni,mesh 6mm , g3_63_strainer elemnt_40nb_90-10 cuni,mesh 6mm , g3_64_strainr elemnt for 200nb_ss 316,mesh 100 , g3_65_strainer elemnt for 100nb_monel,mesh 100 , g3_66_strainer elemnt for 80nb_ss 316,mesh 200 , g3_67_strainer element for 32nb_monel,mesh 200 , g3_68_strainer element for 65nb_monel,mesh 200 , g3_69_strainer element for 50nb_monel,mesh 100 , g3_70_strainer element for 65nb_monel,mesh 100 , g3_71_strainer element for 50 nb y-type_monel , g3_72_strainer element for 65nb_monel,mesh 100 , g3_73_200 nb rubber bellow , g3_74_65 nb corrugated pvc green hose , g3_75_10 nb rubber hose , g3_76_jubilee clips of size 150mm. , g3_77_jubilee clips of size 200mm. , g3_78_metallic bellow, 65 dia, 400mm , g3_79_metallic bellow, 32 dia, 350mm , g3_80_metallic bellow, 40 dia, 350mm , g3_81_strainr elemnt for 150nb_ss 316,mesh 200 , g3_82_bellow metllic - dia 40 dia , g3_83_2000x1000x10 mm thk serrated rubber mats , g3_84_1000x1000x10 mm thk serrated rubber mats , g3_85_pvc door mat, workshops equipment ss pad lock rubber mets and foal items, bench type drilling machine, bench grinding machine, bench vice 150mm, turning tool (carbide tip hss), facing tool (carbide tip hss), knurling tool, threading tool external, parting tool (high speed steel tools), drilling tool, boring tool, reamer (straight, tungsten carbide), threading tool internal, job centering tool with magnetic stand, miniature cnc lathe, metal cutting power saw, jigs and fixture for lathe, drill bit for drilling machine, drill chuck for drilling machine, grinding wheels, saw blade, s.s pad lock-5 levers & key, 3/8 inches bsp pr. gauge_dial 100mm_1 to10 bar, 3/8 inches bsp pr. gauge_dial 100mm_1 to16 bar, bellow metllic - dia 125 dia, hose assy gasoline armoured 2 inches x 8.5 feet, teflon rods_various dia(20mm,50mm,80 mm), teflon tape, thermometer (rings 5deg c- 95 deg c), plstc storge bottle_lub oil_oil sampling, plstc storge bottle_lub oil_fuel samplng, tinted glass storage bottles (1ltr)avcat, glass storage bottle for lub oil, blanks for firemain pumps 150tph, blanks_sea water cooling pump 250tph, blanks for ac sea water pumps, blanks for ac chilled water pumps, battery for torches (big), battery for torches (small), snap on for replcemnt ear plug_glass40-1, steel putiy, valvoline premium blue 7800 plus de oil, dyson v11 absolute pro w/ battery&acces., tarpaulin cover for gt,da intake&exhaust, refrigerant removal kit, 100 nb rubber bellow, 125 nb rubber bellow, strainr elemnt_200nb_90/10 cuni,mesh 6mm, strainr elemnt_150nb_90/10 cuni,mesh 6mm, strainr elemnt_100nb_90/10 cuni,mesh 6mm, strainer elemnt_80nb_90/10 cuni,mesh 6mm, strainer elemnt_50nb_90/10 cuni,mesh 6mm, strainer elemnt_40nb_90/10 cuni,mesh 6mm, strainr elemnt for 200nb_ss 316,mesh 100, strainer elemnt for 100nb_monel,mesh 100, strainer elemnt for 80nb_ss 316,mesh 200, strainer element for 32nb_monel,mesh 200, strainer element for 65nb_monel,mesh 200, strainer element for 50nb_monel,mesh 100, strainer element for 65nb_monel,mesh 100, strainer element for 50 nb y-type_monel, 200 nb rubber bellow, 65 nb corrugated pvc green hose, 10 nb rubber hose, jubilee clips of size 150mm., jubilee clips of size 200mm., metallic bellow, 65 dia, 400mm, metallic bellow, 32 dia, 350mm, metallic bellow, 40 dia, 350mm, strainr elemnt for 150nb_ss 316,mesh 200, bellow metllic - dia 40 dia, 2000x1000x10 mm thk serrated rubber mats, 1000x1000x10 mm thk serrated rubber mats, pvc door mat (commercial)
Agency / Dept :
garden reach shipbuilders and engineers limited GRSE
Due Date :
Aug 07, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16586319
Location : bardhaman , west bengal
Source : GEM Tenders
corrigendum tender for supply laying and testing cable xlpe insulated screened pvc bedded galvanized steel strip etc. , excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting etc. , excavation in trenches not exceeding 1.5 m width and exc 1.5m in depth getting out etc. , returning filling in including spreading levelling watering and well ramming in layers etc. , removal of surplus soil to a distance not exceeding 50 m and depositing where etc. , supply and lay of pcc cable cover class hv type 1 flat size 300mmx180mmx40mm etc. , supply and lay for dry clean dirtless river sand filling for cable protection with a layer of 8cm etc. , m and l for double wall corrugated dwc high density polyethylene pipes hdpe of 90mm dia etc. , m and l for fixing gi tubing 80mm dia light grade use for the protection of cable etc. , m and l for manual boring under road crossing and laying pipe across the road etc. , sandf pcc cable route marker of size 900x300x70mm embossed with ht ug etc. , material and labour for steel tubular poles complete with cast iron base palate final taper plug bolts nuts etc. , m and l for switch air break gang operated triple pole out door type unit on ht 11 kv etc. , m and l for 11 kv 200 amps outdoor type horn gap fuse set conforming to is 9385 part i and ii etc. , m and l for cross arms bracing supports clamps and back plates fabricated from structural etc. , m and l for pin type porcelain vitreous brown insulator of size 150mm height 150mm etc. , m and l for lightning arrester surge protector 11 kv grade heavy duty single pole etc. , s and f danger notice plate of 1.6mm thick mild steel sheet vitreous enamelled white etc. , m and l for cement concrete in foundations filling and mass concrete type d2 etc. , m and l for pcc 1 3 6 type c2 using 40mm grade aggregate as in foundation for pole etc. , m and l for pcc 1 2 4 type b1 using 20mm grade aggregate as in coping for pole etc. , m and l for earthing complete with galvanised steel earth plate electrode 60x60cm 6mm thick etc , m and l for earth continuity conductor or main earthing lead fixed to wall on batten etc. , m and l for disc type porcelain polymer insulator vitreous 145 mm height and 255 mm etc. , pick axe as per is 273 (q4), supply, installation, testing of current transformer 33kv, single phase, outdoor oil filled , ratio 150 75/5 5a , two core, one metering (burden 15va, accuracy class 0.5) and one protection core (burden 30va, accuracy class 5p20) insulation level 36 kv / 70 kv as per is 2705 to suit vcb make complete incl taking out old ct all as per sample and directed., supply, installation, testing of 33 kv single phase out door oil cooled pt of ratio 33 kv/ rt 3 / 110 v/rt 3 accuracy class 1.0 . burden 100va. insulation class 70/170 kv , voltage fector 1.2 cont and 1.5 for 30 sec , confirming to is 3156 complete (as per sample) incl taking down old unserviceable pt all as specified and directed., supply & fixing of 33 kv disc type suspension insulator, porcelain/polymer type, 70 kn mechanical strength, complete with cap and pin, ball & socket type coupling, suitable for 33 kv overhead line, conforming to is 731, including all fittings and accessories complete all as specified and directed., supply & fixing of 33 kv post type insulator, porcelain/polymer, brown glazed, suitable for 33 kv overhead line, complete with gi pin, lead thimble, and all accessories, conforming to is 731 / is 2544 complete all as specified and directed., preparation of detailed layout drawing in autocad and supply, fabrication, uv printing/engraving and fixing of 33 kv main receiving station layout, powerhouse no 2 layout and powerhouse no 1 layout on acp board, comprising site verification, preparation/finalization of single line diagram (sld) and equipment layout in autocad, submission for approval, high resolution uv printing or cnc engraving on minimum 3 mm thick aluminium composite panel (acp), protective coating, aluminium framing, and wall mounting complete in all respects., m & l for filling and spreading aggregate/stone using 40 mm grade trap stone aggregate around 4 pole , 2 pole structure and transformer etc., m&l for surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and as directed., m&l 150 mm thick soiling (or sub base) with broken boulders or quarried stone, interstices filled, suface formed and rolled and consolidated to required gradient and camber all as specified and directed., m&l for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed., m&l for pcc 1 4 8 type d 2 (40mm graded aggregate) in foundations, filling and mass concrete., m&l for pcc 1 2 4 type b1 (using 20mm grade aggregate) as in coping for pole inclduing form work and finishing the surfaces even and smooth etc complete all as specified and directed., supply and fix led tube light fitting surface and wall mounted batten with 20 watts led including removal of old one complete all as specified and directed., m and l for earthing complete with galvanised steel earth plate electrode 60x60cm 6mm thick buried directly in ground earth pit not less than 225 metres deep below ground level with top edge of the plate not less than 15 metres below normal ground level connected to galvanised iron strip 25x4mm by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate no 3 connected to earthing test point all as specified or indicated including testing on completion, excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting out in soft/loose soil all as specified and as directed., excavation in trenches not exceeding 1.5 m width and exc 1.5m in depth getting out in soft/loose soil all as specified and as directed., returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick using excavated soft/loose soil all as specified and as directed., removal of surplus soil to a distance not exceeding 50 m and depositing where directed by engr in charge., m&l for fixing gi tubing 15mm dia light grade use for the protection of earthing lead., m&l for fixing gi tubing 20mm dia light grade use for watering to earthing, m&l for funnel, wire mesh, lugs, nut, bolts etc, m&l for ms angle frame and sheet cover, m&l for pcc 1 2 4 type b1 (using 20mm grade aggregate) for earth pit chamber inclduing form work and finishing the surfaces even and smooth etc complete, m and l for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6 mm galvanised iron strip complete, m and l for disc type porcelain/polymer insulator vitreous 145 mm height and 255 mm diameter ball and socket type suitable for 11 000 volts grade complete with one galvanized mild steel spindle two galvanized iron washers and one galvanized iron nut complete in all respects as specified and as directed.
Agency / Dept :
indian army
Due Date :
Aug 07, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16424060
Location : bardhaman , west bengal
Source : GEM Tenders
tender for supply laying and testing cable xlpe insulated screened pvc bedded galvanized steel strip etc. , excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting etc. , excavation in trenches not exceeding 1.5 m width and exc 1.5m in depth getting out etc. , returning filling in including spreading levelling watering and well ramming in layers etc. , removal of surplus soil to a distance not exceeding 50 m and depositing where etc. , supply and lay of pcc cable cover class hv type 1 flat size 300mmx180mmx40mm etc. , supply and lay for dry clean dirtless river sand filling for cable protection with a layer of 8cm etc. , m and l for double wall corrugated dwc high density polyethylene pipes hdpe of 90mm dia etc. , m and l for fixing gi tubing 80mm dia light grade use for the protection of cable etc. , m and l for manual boring under road crossing and laying pipe across the road etc. , sandf pcc cable route marker of size 900x300x70mm embossed with ht ug etc. , material and labour for steel tubular poles complete with cast iron base palate final taper plug bolts nuts etc. , m and l for switch air break gang operated triple pole out door type unit on ht 11 kv etc. , m and l for 11 kv 200 amps outdoor type horn gap fuse set conforming to is 9385 part i and ii etc. , m and l for cross arms bracing supports clamps and back plates fabricated from structural etc. , m and l for pin type porcelain vitreous brown insulator of size 150mm height 150mm etc. , m and l for lightning arrester surge protector 11 kv grade heavy duty single pole etc. , s and f danger notice plate of 1.6mm thick mild steel sheet vitreous enamelled white etc. , m and l for cement concrete in foundations filling and mass concrete type d2 etc. , m and l for pcc 1 3 6 type c2 using 40mm grade aggregate as in foundation for pole etc. , m and l for pcc 1 2 4 type b1 using 20mm grade aggregate as in coping for pole etc. , m and l for earthing complete with galvanised steel earth plate electrode 60x60cm 6mm thick etc , m and l for earth continuity conductor or main earthing lead fixed to wall on batten etc. , m and l for disc type porcelain polymer insulator vitreous 145 mm height and 255 mm etc. , pick axe as per is 273 (q4), supply, installation, testing of current transformer 33kv, single phase, outdoor oil filled , ratio 150 75/5 5a , two core, one metering (burden 15va, accuracy class 0.5) and one protection core (burden 30va, accuracy class 5p20) insulation level 36 kv / 70 kv as per is 2705 to suit vcb make complete incl taking out old ct all as per sample and directed., supply, installation, testing of 33 kv single phase out door oil cooled pt of ratio 33 kv/ rt 3 / 110 v/rt 3 accuracy class 1.0 . burden 100va. insulation class 70/170 kv , voltage fector 1.2 cont and 1.5 for 30 sec , confirming to is 3156 complete (as per sample) incl taking down old unserviceable pt all as specified and directed., supply & fixing of 33 kv disc type suspension insulator, porcelain/polymer type, 70 kn mechanical strength, complete with cap and pin, ball & socket type coupling, suitable for 33 kv overhead line, conforming to is 731, including all fittings and accessories complete all as specified and directed., supply & fixing of 33 kv post type insulator, porcelain/polymer, brown glazed, suitable for 33 kv overhead line, complete with gi pin, lead thimble, and all accessories, conforming to is 731 / is 2544 complete all as specified and directed., preparation of detailed layout drawing in autocad and supply, fabrication, uv printing/engraving and fixing of 33 kv main receiving station layout, powerhouse no 2 layout and powerhouse no 1 layout on acp board, comprising site verification, preparation/finalization of single line diagram (sld) and equipment layout in autocad, submission for approval, high resolution uv printing or cnc engraving on minimum 3 mm thick aluminium composite panel (acp), protective coating, aluminium framing, and wall mounting complete in all respects., m & l for filling and spreading aggregate/stone using 40 mm grade trap stone aggregate around 4 pole , 2 pole structure and transformer etc., m&l for surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and as directed., m&l 150 mm thick soiling (or sub base) with broken boulders or quarried stone, interstices filled, suface formed and rolled and consolidated to required gradient and camber all as specified and directed., m&l for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed., m&l for pcc 1 4 8 type d 2 (40mm graded aggregate) in foundations, filling and mass concrete., m&l for pcc 1 2 4 type b1 (using 20mm grade aggregate) as in coping for pole inclduing form work and finishing the surfaces even and smooth etc complete all as specified and directed., supply and fix led tube light fitting surface and wall mounted batten with 20 watts led including removal of old one complete all as specified and directed., m and l for earthing complete with galvanised steel earth plate electrode 60x60cm 6mm thick buried directly in ground earth pit not less than 225 metres deep below ground level with top edge of the plate not less than 15 metres below normal ground level connected to galvanised iron strip 25x4mm by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate no 3 connected to earthing test point all as specified or indicated including testing on completion, excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting out in soft/loose soil all as specified and as directed., excavation in trenches not exceeding 1.5 m width and exc 1.5m in depth getting out in soft/loose soil all as specified and as directed., returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick using excavated soft/loose soil all as specified and as directed., removal of surplus soil to a distance not exceeding 50 m and depositing where directed by engr in charge., m&l for fixing gi tubing 15mm dia light grade use for the protection of earthing lead., m&l for fixing gi tubing 20mm dia light grade use for watering to earthing, m&l for funnel, wire mesh, lugs, nut, bolts etc, m&l for ms angle frame and sheet cover, m&l for pcc 1 2 4 type b1 (using 20mm grade aggregate) for earth pit chamber inclduing form work and finishing the surfaces even and smooth etc complete, m and l for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6 mm galvanised iron strip complete, m and l for disc type porcelain/polymer insulator vitreous 145 mm height and 255 mm diameter ball and socket type suitable for 11 000 volts grade complete with one galvanized mild steel spindle two galvanized iron washers and one galvanized iron nut complete in all respects as specified and as directed.
Agency / Dept :
indian army
Due Date :
Aug 04, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16446259
Location : aurangabad-mh , maharashtra
Source : GEM Tenders
tender for digital weighing balance 0.01 g accuracy , portable moisture analyser 5 -50 degree celsius , hand refractometer , digital ph meter , hydrometer , digital thermometer , stopwatch , electric hot plate , spirit lamp , beaker set , measuring cylinders , conical flask 250 mm , test tube pack of 25 , test tube stand , glass stirring rod , glass funnels , watch glasses , petri dishes , pasteur pipettes , filter paper sheet , stainless steel sieve , stainless steel tray , stainless steel spatulas , laboratory forceps or tweezers , measuring sampling scoop spoon , led inspection lamp , magnifying glass , white ceramic lab inspection tile , glass sample bottles , airtight plastic containers , zip lock sample bags , distilled water 5l , aluminium foil , laboratory tissue paper roll , non absorbent cotton roll , plastic squeeze washing bottle 500ml , nitrile examination gloves pack of 100, food lab equipment, digital weighing balance 0.01 g accuracy, portable moisture analyser 5 -50 degree celsius, hand refractometer 0-32% brix, perfect for various applications in food, beverage, and agriculture, digital ph meter, hydrometer measure specific gravity range 0.700 to 2.000-0.01, digital thermometer, stopwatch multi-function electronic timer, electric hot plate, spirit lamp, beaker set of 250ml glass beaker, 100ml, 50ml glass beaker, measuring cylinders set 10 ml, 25ml, 50ml, 100 ml, 250 ml, conical flask 250 mm, test tube pack of 25, test tube stand stainless steel or plastic, glass stirring rod, glass funnels pack of 2, watch glasses borosilicate 6 piece, petri dishes of 6 pack, pasteur pipettes 3ml, dropper, pack of 100, filter paper sheet, 110 mm circle pack of 100 sheets whatman grade-1, stainless steel sieve (60-100mm) mesh, stainless steel tray, stainless steel spatulas for laboratory, laboratory forceps/tweezers 6 inch straight tweezers for lab, measuring sampling scoop spoon set of 9 pcs micro sampling scoop spoon with double ended design suitable for mixing transferring, led inspection lamp, magnifying glass, white ceramic lab inspection tile, glass sample bottles 3.90x1.60x1.60cm/ 1.53x0.63x0.63 inch tiny glass bottles, airtight plastic containers 12 pieces packs, zip lock sample bags 100 pcs, distilled water 5l for laboratory, aluminium foil, laboratory tissue paper roll, non absorbent cotton roll for jars, bottles, & office organization (50x25mm, strong adhesive), plastic squeeze washing bottle 500ml flexible ldpe rinsing bottle for labs cleaning, irrigation & chemical washing, nitrile examination gloves pack of 100
Agency / Dept :
indian army
Due Date :
Aug 05, 2026
Tender Value :
50K
View Documents
T18 Ref No : 16465683
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
tender for repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs c-423; e045 engine room and water jet compartment aluminum chequer plates oxidized due to exposure to sea water and persisting conditions resulting in loss of prote.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs c-423; e046 base frame and supporting angle frame of chequer plates of engine room and water jet compartment broken view material found thinned same to be renewed a.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs c-423; h016 pvc flooring of dining area including alleyway 9 rating jr sls mess front area perished same to be renewed as per sample area 30 sq mtr; service provide.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs c-423; h017 sunmica of the following places found deteriorated same to be renewed as per sample total area 30 sq feet 1 ward room dining table 2 sailors dining ..
Agency / Dept :
indian coast guard ICG
Due Date :
Aug 04, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16344752
Location : kannur , kerala
Source : GEM Tenders
tender for soil investigation for augmentation of water storage and distribution system , mobilization of boring equipment , setting of drilling rig , drilling of bore hole , laboratory investigation , determination of chemical properties , conducting plate load test , determination of physical and chemical properties , determination of rl on ground level , preparation and submission of investigation report, geo investigation for augmentation of water storage and distribution system at ina ezhimala, providing access to the site,clearing site and making good to erecting and conducting soil testing transfers within the site and for any other temporary arrangements to be erected within the area in connection with conducting soil testing (03 locations), mobilization of boring equipment for soil investigation and demobilization of equipment after completion of work, setting of drilling rig at each bore locations, drilling of borehole, trial pits 01 no for ph and bore hole for ug sump-03 nos and ph - 01 no. boreholes will be made using rotary drilling and representative soil samples shall be collected from the boreholes at every 1m interval or change of strata. the diameter of boreholes will be 150mm as per is-1892.the borehole shall be terminated at 15 m below existing ground level (egl) or upto hard rock strata which is occur earlier. the following shall be carried out (i) field investigation shall be carried out on top of the ground level of each borehole shown as a drawing. (ii) standard penetration test will be carried out as per is 2131-1981 at 1m interval or change in strata. the spt consists of driving split spoon sampler 63.5 kg hammer drop weight with free fall of 760 mm. the number of blows for every 150 mm shall be recorded for a penetration of 450 mm (a) trial pit 01 each and (b) bore hole 06 each., laboratory investigation - the soil samples be tested in the laboratory to evaluate the following. a)type of soil and its gradation b)consistency limit c)natural density d)natural water content e)shear tests, determination of chemical properties - the soil samples be tested in the laboratory to evaluate the following a) ph b) sulphur content c) chloride content, conducting plate load test and submission of soil bearing capacity report for proposed different site including mobilization of equipment, excavation, testing and submission of detailed geotechnical report. (a) excavation up to required testing depth. (b) providing all labour, hydraulic jack, reaction arrangement, loading platform, test plates, measuring gauges and accessories. (c) recording settlement observations at various loading stages (24 hrs). determination of (d) safe bearing capacity (sbc) (e) settlement characteristics (f) modulus of subgrade reaction (g) submission of detailed soil investigation and test report with recommendations for foundation design. the final report shall contain (a) site observations (b) test methodology (c) load vs settlement curves (d) safe bearing capacity calculations (e) foundation recommendations (f) settlement analysis (g) photographs of testing, determination of physical and chemical properties of ground water shall include tests for ph, total hardness, etc, determination of rl of ground level/founding level with reference to a bm using topographic survey (03 locations), preparation and submission of investigation report for suitable foundation which includes a) sbc should be worked out for following size of isolated footing / raft foundation. i)1.5x1.5 m ii) 1.5x2.5 m iii) 2.0x2.5 m iv)2.0x3.0 m b) photographic record of geo exploration as well as testing. c) recommendation as regards possibility of liquefaction of soil in case of saturated or partially saturated loose or uncompacted sandy soil. d) swelling index and swelling pressure in respect of black cotton soil and its depth or layer. e) depth of ground water table(gwt) in peak mansoon(lowest) peak summer (highest)after correlation of result with seasonal variation of water table in proposed site.lab testing, borelogs, recommendation of foundation type and bearing capacity including vetting by any govt engg colleges.
Agency / Dept :
indian army
Due Date :
Jul 31, 2026
Tender Value :
11.8L
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Water Sampling Equipment. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Water Sampling Equipment sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Water Sampling Equipment Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Water Sampling Equipment, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Water Sampling Equipment Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Water Sampling Equipment Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Water Sampling Equipment.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Water Sampling Equipment depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Water Sampling Equipment Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Water Sampling Equipment bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Water Sampling Equipment. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Water Sampling Equipment, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Water Sampling Equipment, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Water Sampling Equipment?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Water Sampling Equipment tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Water Sampling Equipment?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Water Sampling Equipment, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Water Sampling Equipment is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All