Sales : +917069661818
Sign In
Register Now
Sample Tenders

Filters By:

T18 Ref No
Keyword
State
City
Agency
Tender ID
Due Date
Tender Source
Tender Type
Reset

44Results forLatest Tube furnace Tenders List

▼

Latest Tube furnace Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Tube furnace tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Tube furnace tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Tube furnace Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Tube furnace tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Tube furnace Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Tube furnace Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Tube furnace Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Tube furnace tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Tube furnace Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Tube furnace sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Tube furnace tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Tube furnace tenders.

Is EMD mandatory for all Tube furnace tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Tube furnace work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Tube furnace tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Tube furnace Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16093091
new Tender
Location : roorkee , uttarakhand
new Tender

tender for high temperature tube furnace with gas purging

Agency / Dept : indian institute of technology IIT
Tender Value : 0
Due Date : Jul 20, 2026
View Documents
T18 Ref No : 16082067
live Tender
Location : jodhpur , rajasthan
Source : GEM Tenders
live Tender

tender for single zone high temperature tube furnace with controlled inert environment

Agency / Dept : defence research and development organisation DRDO
Tender Value : 0
Due Date : Jul 23, 2026
View Documents
T18 Ref No : 15984764
live Tender
Location : thiruvananthapuram , kerala
Source : GEM Tenders
live Tender

tender for tube furnace with 2 year warranty , accessories , installation demonstration and training charges , packing forwarding freight insurance , transporatation and unloading charges, tube furnace with 2 year warranty, tube furnace with 2 year warranty, accessories, installation demonstration and training charges, packing forwarding freight insurance, transporatation and unloading charges

Agency / Dept : national centre for earth science studies NCESS
Tender Value : 0
Due Date : Jul 16, 2026
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15811136
live Tender
Location : chandrapur , maharashtra
live Tender

tender for work contract for erection & removal of cup lock scaffolding inside the boiler, furnace cleaning by hydro jetting machine & boiler tube replacement by hp welding & allied work in 1st pass including sh & rh coil during aoh of u # 8 ( 2x500 mw) , cstps chandrapur

Agency / Dept : Maharashtra State Power Generation Company Limited MAHAGENCO
Tender Value : 17367992
Due Date : Jul 07, 2026
View Documents
T18 Ref No : 15982890
live Tender
Location : muzaffarnagar , uttar pradesh
Source : GEM Tenders
live Tender

tender for erection and fabrication work a erection and fabrication work a 1 , erection and fabrication work a 2 , erection and fabrication work a 3 , erection and fabrication work a 4 , erection and fabrication work a 5 , erection and fabrication work a 6 , erection and fabrication work a 7 , erection and fabrication work a 8 , erection and fabrication work a 9 , erection and fabrication work a 10 , erection and fabrication work a 11 , erection and fabrication work a 12 , erection and fabrication work a 13 , erection and fabrication work a 14 , erection and fabrication work a 15 , erection and fabrication work a 16 , erection and fabrication work a 17 , erection and fabrication work a 18 , erection and fabrication work a 19 , erection and fabrication work a 20 , erection and fabrication work a 21 , erection and fabrication work a 22 , erection and fabrication work a 23 , erection and fabrication work a 24 , erection and fabrication work a 25 , erection and fabrication work a 26 , erection and fabrication work a 27 , erection and fabrication work a 28 , erection and fabrication work a 29 , erection and fabrication work a 30 , erection and fabrication work a 31 , erection and fabrication work a 32 , erection and fabrication work a 33 , erection and fabrication work a 34 , erection and fabrication work a 35 , erection and fabrication work a 36 , erection and fabrication work a 37 , erection and fabrication work a 38 , erection and fabrication work a 39 , erection and fabrication work a 40 , erection and fabrication work a 41 , erection and fabrication work a 42 , erection and fabrication work a 43 , erection and fabrication work a 44 , erection and fabrication work a 45 , erection and fabrication work a 46 , erection and fabrication work a 47 , erection and fabrication work a 48 , erection and fabrication work a 49 , erection and fabrication work a 50 , erection and fabrication work a 51 , erection and fabrication work a 52 , erection and fabrication work a 53 , erection and fabrication work a 54 , erection and fabrication work a 55 , erection and fabrication work a 56 , erection and fabrication work a 57 , erection and fabrication work a 58 , erection and fabrication work a 59 , erection and fabrication work a 60 , erection and fabrication work a 61 , erection and fabrication work a 62 , erection and fabrication work a 63 , erection and fabrication work a 64 , erection and fabrication work a 65 , erection and fabrication work a 66, erection and fabrication work a, cutting and removing the weak/broken parts of the discharge chute for the scraper in the mill, fabricating new parts from 12 mm plate, reinstalling them, fixing hole plates as per profile by welding to secure the scraper, and conducting a trial after completion of work., cutting and removing the worn/weak runner base of the cane carrier, fabricating a box structure using 100 mm channel to installation the runner base, fitting it properly, and straightening and reusing the old channel by turning it over., cutting and removing the old worn/cut 40/50 mm square bars of the cane unloader and installing new square bars in their place as before, followed by a satisfactory trial., cutting and removing the worn/cut runners of the cane carrier/rake carrier/bagasse elevator/r.b.c., reinstalling them by either turning over the old ones or fitting new runners as per original design., cutting and removing the worn/cut/weak side plates of chains used in cane carrier/rake carrier/r.b.c., and installing old or new plates in their place., cutting and removing the worn/weak side plates of the fibrizer hood, installing new plates, welding inside and outside, and conducting a satisfactory trial., complete overhauling, testing, and trial of the bagasse baling machine., performing necessary repairs on the old racks of s.r.c./i.r.c., fabricating new racks as per sample for the chains of bagasse elevator/r.b.c., replacing the weak/broken bottom/top covers of t.r.p.f. by fabricating and installing new covers as per original design, and conducting a satisfactory trial., cutting and removing the weak/broken tail end boots of s.r.c./i.r.c., fabricating new ones from 8.0/10.0 mm old/new plate as per sample, installing, leak-proof welding, and conducting a satisfactory trial., dismantling various parts of the cane unloader grabs, repairing all parts, hardfacing the fingers as per instructions, and reassembling the grabs., cutting and removing the weak/broken juice tray used for compound imbibition in mills, fabricating a new tray from plate as per sample, installing it in place, and making all connections., cutting and removing the worn/weak guides that prevent chains of cane carrier/s.r.c./i.r.c. and bagasse elevator from lifting, fabricating new guides as per instructions, installing them, and conducting a satisfactory trial., welding the worn/cut wheels of the cane unloader bridge/trolley drive as per instructions., cutting and removing the weak/broken donali chutes of t.r.p.f., fabricating new donali chutes as per the old ones, and erecting them in place., fabricating and installing m.s. rings on the idler wheel of the cane carrier as per instructions., fabricating and installing a support using 25.0 mm plate between the mill head stock and t.r.p.f. head stock as per instructions., repairing and balancing the old hammer shanks of the fibrizer by welding and hardfacing as per instructions., cutting and removing the worn/weak hoods of the cane chopper/leveller and fabricating a new folding type from new plate and installing it., replacing the broken plates in the pockets of the fibrizer's pocketed type anvil plate with new plates, straightening bent plates, welding, and hardfacing as per instructions., welding and leveling the worn hubs of the cane leveller/chopper rotor assembly on the working side and top sides, and hardfacing as per instructions., cutting and removing the weak beds of reduction gears and motors on cane unloaders, modifying and fabricating new beds, installing them, aligning the gear and motor, and conducting a trial., strengthening the weak/broken columns of the cane carrier structure by welding plates as per instructions., fabricating and fitting juice rings in the mill rollers as per sample., performing necessary repairs on the pressure chutes installed between t.r.p.f. and the mill., cutting and removing the weak/broken juice receiving tank of the mills, fabricating a new tank from 8.0/10.0 mm plate as per sample, fitting it in place, making all connections, and conducting a leak-proof trial., cutting and removing the weak/broken bottom cone of the mill's juice receiving tank, fabricating a new cone as per sample, fitting it in place, making all connections as before, and conducting a leak-proof trial., cutting and removing the weak/broken 10 inch/12 inch pipes between the mill juice tray and gutter, fabricating and fitting new s.s. pipes in their place, and conducting a leak-proof trial., lining the bottom trough of s.r.c./i.r.c. with 3.00 mm thick s.s. plate and doing leak-proof welding., removing the shifted bed of feed pump no. 1 on the boiler, fabricating and installing a new bed, making related connections, and conducting a trial., making the damper in the old i.d. fan ducting at the boiler station leak-proof using new/old plate before the chimney and doing complete welding so that when the new i.d. runs, there is no back air from the chimney., cutting and removing the nipple reducers of all three wet scrubber pumps and their leaking pipe lines, installing new pipe lines, and making all connections as before with leak-proof welding., opening all nozzles inside the wet scrubber venturi, removing damaged nozzles, installing new nozzles, and making all connections as before., fabricating new pipes from old boiler tubes for backwash from the service tank to the wet scrubber, and making all connections with new valves and clamps in the pipeline., cutting and removing the weak and leaking juice tray from under the t.r.p.f. that brings juice to the mill juice tray, and fabricating and installing a new one., cutting and removing the weak/broken ash chutes of the boilers, and fabricating and fitting new chutes from old/new plate as per the old ones., performing necessary repairs on the weak/broken dampers of air heaters, economizers, and f.d./i.d. fans' inlets/outlets or suction/delivery., replacing the frames and grids of the internal steam filter fitted in the boiler drums by fabricating new frames and fitting grids., cutting and removing the weak/broken flue gas ducting between the i.d. fans and the chimney, fabricating and installing new ducting from 5.0/6.0 mm thick plate, and conducting a leak-proof trial., for the weak bagassilo fan, fabricating a new impeller as per sample, repairing the casing as necessary, and conducting a successful trial., cutting and removing the weak/broken suction cones in the casings of i.d./f.d. fans, fabricating and installing new cones as per sample, and conducting a successful trial., replacing the damaged weak grids/perforated sheets of the baffle plates inside the boiler feed tank., cutting and removing the weak/broken bagasse feeding chutes of boiler no. 1, 2, and 3, and performing necessary repairs., replacing the weak/broken air headers installed outside for supplying additional f.d. air in the furnace of 20-ton capacity boiler no. 1 and 2 with new headers., cutting the weak/broken ducting between the air heater and i.d. fans and fabricating and installing new ducting from 5/6 mm thick plate., removing damaged perforated grids in the bagasse elevator used for bagasse to bagassilo filtration and fitting new grids., lowering the economizer coils/tubes of 20-ton capacity boiler no. 1 and 2, cleaning them internally and externally, conducting hydraulic testing at standard pressure, and after testing, lifting and refitting them, making the economizer bands leak-proof, and conducting a satisfactory hydraulic test., cutting and removing the weak/broken channel/plate of the s.r.c./i.r.c. trough and fabricating and installing new ones as per instructions., fabricating and installing angle iron rings for strengthening the boiler chimney., strengthening the weak and damaged truss-type bridge structure of the cane unloader by adding new channels, angles, and plates to provide satisfactory strength., welding the oval/worn enlarged holes on both ends of the block-type chain links of s.r.c./i.r.c. chains, drilling pin-size holes in the attachment, and grinding the faces to level., cutting and removing the worn/weak attachment used for fixing racks on the block-type chain links of s.r.c./i.r.c. chains, fabricating new attachment links from 12 mm thick plate as before, welding them onto the links, and drilling holes as per drawing., constructing a separate platform path using old angle channels for access to all three unloaders., replacing the weak/broken parts of i.d. fan casing, air heater cell/ducting, and economizer cell., cutting and removing the old m.s. plate of the bottom trough and boot of s.r.c./i.r.c., installing new plate to make the trough and boot leak-proof, and lining the boot and trough with 3 mm thick s.s. plate, followed by a satisfactory trial., fabricating new racks from 25 mm thick plate as per sample for s.r.c./i.r.c. chains, drilling holes, cutting and supporting chain rollers on both ends, and preparing them., removing the bent 250 mm channel of the trolley in the cane unloader, leveling it, strengthening the structure, fitting worn/weak runner square bars, checking diagonals, and leveling the wheel., removing all four wheels of the mill and power house crane, cleaning, checking bearings, greasing all plumber blocks, replacing damaged bearings with mill spares, welding worn wheels to a uniform size, and conducting a satisfactory trial., performing necessary repairs and hardfacing on the worn shells/teeth of t.r.p.f. top/bottom rollers, and adding rings on both sides as needed to compensate for reduced shell length., cutting and removing the weak/leaking juice tray of the mill and fabricating a new one from 5 mm s.s. plate as per sample, and conducting a leak-proof trial., performing necessary repairs on the damaged s.s. juice tray of the mill., in case of head stock cracking or misalignment, removing the head stock, regrouting, aligning, and completing all related work., removing the shaft of the damaged t.r.p.f. roller and dismantling the shell using gas cutting., cutting the 63.5 mm old boiler tubes with bends, making a 5.1 meter straight line, preparing them for the air heater, and cleaning them by grinding.

Agency / Dept : uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Tender Value : 1657196
Due Date : Jul 10, 2026
View Documents
T18 Ref No : 16042253
live Tender
Location : nanauta , uttar pradesh
Source : GEM Tenders
live Tender

tender for mill house item no 1 , mill house item no 2 , mill house item no 3 , mill house item no 4 , mill house item no 5 , mill house item no 6 , mill house item no 7 , mill house item no 8 , mill house item no 9 , mill house item no 10 , mill house item no 11 , mill house item no 12 , mill house item no 13 , mill house item no 14 , mill house item no 15 , mill house item no 16 , mill house item no 17 , mill house item no 18 , mill house item no 19 , mill house item no 20 , mill house item no 21 , mill house item no 22 , mill house item no 23 , mill house item no 24 , mill house item no 25 , mill house item no 26 , mill house item no 27 , mill house item no 28 , mill house item no 29 , mill house item no 30 , mill house item no 31 , mill house item no 32 , mill house item no 33 , mill house item no 34 , mill house item no 35 , mill house item no 36 , mill house item no 37 , mill house item no 38 , mill house item no 39 , mill house item no 40 , mill house item no 41 , mill house item no 42 , mill house item no 43 , boiler house item no 1 , boiler house item no 2 , boiler house item no 3 , boiler house item no 4 , boiler house item no 5 , boiler house item no 6 , boiler house item no 7 , boiler house item no 8 , boiler house item no 9 , boiler house item no 10 , boiler house item no 11 , boiler house item no 12 , boiler house item no 13 , boiler house item no 14 , boiler house item no 15 , boiler house item no 16 , boiler house item no 17 , boiler house item no 18 , boiler house item no 19 , boiler house item no 20 , boiler house item no 21 , boiler house item no 22 , boiler house item no 23 , boiler house item no 24 , boiler house item no 25 , boiler house item no 26 , boiler house item no 27 , boiler house item no 28 , boiler house item no 29 , boiler house item no 30 , boiler house item no 31 , boiler house item no 32 , boiler house item no 33 , boiler house item no 34 , boiler house item no 35 , boiler house item no 36 , pan calandria work , spray item no 1 , vaccuum crystalizer , schedule work 1 , schedule work 2 , schedule work 3 , schedule work 4 , schedule work 5 , schedule work 6 , schedule work 7 , schedule work 8 , schedule work 9 , schedule work 10 , schedule work 11 , schedule work 12 , schedule work 13 , schedule work 14 , schedule work 15 , schedule work 16 , schedule work 17 , schedule work 18 , schedule work 19 , schedule work 20 , schedule work 21 , schedule work 22 , schedule work 23 , schedule work 24 , schedule work 25 , schedule work 26 , schedule work 27 , schedule work 28 , schedule work 29 , schedule work 30 , schedule work 31 , schedule work 32 , schedule work 33 , schedule work 34 , schedule work 35 , schedule work 36 , schedule work 37 , schedule work 38 , schedule work 39 , schedule work 40 , schedule work 41 , schedule work 42 , schedule work 43 , schedule work 44 , schedule work 45, boiler febrication, cutting of cheveran pineapple grooves on mill rollers, replacement of weak or worn out runners of cane carrier src and irc and cane unloader power supply angle, welding of oval hole or enlarged holes of attachments of block type chain links and redrilling as per template or profile, replacement of weak or worn out attachment of block type chain links along with drilling as per template orprofile and welding, replacement of worn-out tail end boot of src and irc, fabrication and fitting of new juice rings for mill roller as per sample, dismantling of worn out portion of square bar of long travel and cross travel there after grinding of base plate and fitting leveling and alignment of new square bar of cane unloader, welding on wear out mill and grpf crown pinion teeth there after grinding of teeth to make it as per profile, dismantling fabrication and erection of weak or worn out mill juice or water imbibitions box of compound imbibitions system, fabrication and erection of mill roller feed and discharge bearing cover from 10 mm or 8mm plate, fabrication and erection of runner supporting box below runner at irc src cane carrier and auxiliary cane carrier, replacement of worn out deflector plate and top plate of cane chopper or cane leveller or fibrizer by m s plate or ss lining plates along with strengthening, dismantling fabrication and erection of worn out or weak cane carrier chain side angle, dismantling fabrication and erection of return cane carrier chain supporting runner chain guide, dismantling fabrication and erection of worn out ms plate of truck tripler src irc and cane carrier side plate, sprocket teeth repairing and strengthening with extra support of irc src elevator new and old mbc rbc, repair and hard facing of auxiliary cane carrier kicker or pusher, welding and hard facing on wear out under feed roller teeth shell of roller and enlarging the length of roller as per standerd, replacement of worn-out perforated juice plate of screw conveyor at mill, repair and hard facing on cane leveller or chopper hubs, lever bracket of underfeed roller scrapper to be changed and to be fitted as directed, replacement and hard facing of worn out partition plate of anvil plate with 25 mm plate, hot forging of enlarged or eggshape holes of cane carrier links to make them as per existing, fabrication of 10 inch size non return valve from m s plate with fitting and leak proof trial, fabrication and erection of rotary screen ms conical juice tank, repair of cane carrier slates such as worn-out side wear plates holes and other to be done, fabrication and hard facing of under feed roller scrapper as per instructions to be done, welding on wear out teeth of cane carrier s r c and i r c sprockets to be done and teeth to be made as per profile after grinding process, ms ring to be fitted on worn-out both side of bagasse pusher at fibrizer and hard facing to be done on square bars fitted, welding of grpf scrapper teeth to make them as per profile after hard facing and grinding, repair and hard facing of cane unloader grab finger, underfeed roller pinion teeth builtup & hard facing, repairing of ms guard cover mill rollers crown pinion, dismantling and fitting of bagacillo screen as per instruction, dismantling of sprockets of src irc elevator etc on drive or trial end shaft and fitting the sameon new shaft &successful trail, rotary screen worn out support box replacement and accordingly strengthening its platform with successful trail, ss plates lining on the truff of irc or src and mills head stock grpf pressure chute nose plates and grinding of surface, fabrication and fitting of new fish plates of the grpf pressure chute and also fitting of profile building of the bottom and top new or old scrappers of the same along with ss linner of 5mm thick plate as per old sample, build up of oval enlarged pin holes of links of block type chain and drilling of holes as per pitch suitable to our pin, patching or repairing of weak worn out portion of cane unloader no 3 cabin by new old ms plate size 6mm along with proper strengthening, fabrication and erection of new src or irc racks as existing design sample, repairing of old src irc racks, repairing and hard facing of fibrizer hammer shank, dismantling of wornout burnt c i feeding chute of 20 ton boiler and fitting of new ci mouth-piece chute of bagasse feeder, dismantling fabrication and fitting of complete new casing of id fan with cone of 20 tph boiler, dismantling fabrication and fitting of complete new casing of id fan with cone of 30 tph boiler, fabrication and erection of weak portion of runner supporting box below the chain runner at old mbc new mbc cross carrier1,2,3 or bagasse elevator, dismantling of wornout burnt c i feeding chute of 40 ton boiler and fitting of new ci mouth-piece chute of bagasse feeder, replacement of worn out orweak portion of bottom trough and side plate of old new main bagasse carrier bagasse elevator cross carriers rbc by old new ms plates, replacement of worn-out ducting dampers of i d or fd fan economizer airheater inlet and outlet dampers with levers and bushes, replacement of worn-out weak portion of ducting of flue gas at different places with new old ms plate, fabrication and fitting of bagasse ash chute for new and old boilers with new old ms plate, repairing of wet scrubber shell demister of the 20 30 and 40 tons boiler by new or old ms plate or flat, fabrication and fitting of bagasse sliding gate for different bagasse carriers with successful trail, fabrication and erection of the bagasse cillo impeller with satisfactory trial as per old sample as directed, dismantling of boiler side wall front wall sealing plate economizer casing for replacement of boiler tubes dismantled old plates to be fitted with minor repair or patching after replacement of boiler tubes, replacement reversing of weak worn out runners of new mbc old mbc bagasse elevator cross carriers and rbc etc, repairing of wear out drive non drive end sprocket teeth by welding and grinding to make profile as per template of all bagasse carrier chains etc, repair of worn out weak boiler fd id fan casing along with successful trial by old new ms plate, replacement of worn out bagasse blower casing at bagasse elevator as per sample or as directed, complete hard facing of id fan impeller of 20 30 40 ton boilers, dismantling fabrication and erection of new old boiler i d fan expansion joint, dis cleaning repair and fitting of 20 30 and 40 ton boilers internal fitting, replacement of worn out hanging roof and arch structure of beam or channel size- 4 inch 5 inch of boiler no 1 and 2 of furnace and detrick arch, fabrication of bagasse feeding jantra of tractor, fabrication and fitting of worn out weak bagasse chute at belt conveyor, repairing of grate bars of 30 or 40 ton boilers, replacement of worn out teeth of bagasse feeder rotating drum of boiler no-3, 4 and 5 with satisfactory trial, dismantling fabrication and erection of id fan blade with base plate ribs and suction cone (a) 30 ton boiler, dismantling fabrication and erection of id fan blade with base plate ribs and suction cone (a) 40 ton boiler, fabrication and fitting of worn out chain supporting guide of new mbc old mbc bagasse elevator cross carrier and rbc etc, dismantling fabrication and fitting of worn out portion of old feed tank of boiler no 1 2 and 3, replacement of worn out ms beam and channel arrangement size- 4 inch or 5 inch of boiler no 1 and 2 arch, dismantling fabrication and fitting of safety valve worn out discharge assembly with proper support, replacement of worn out ms beam and channel arrangement size- 8inch 9inch for supporting side wall and roof tubes of boiler no 4 and 5, fabrication and erection of new racks for new mbc, fabrication and erection of new racks for old mbc, fabrication and erection of new racks for 3rd cross carrier chain, repairing of weak portion of racks of all bagasse carrier chains, dismantling of pan no 6 (196 sqm h s area 40ton) calandria providing the support for stay the shell above calandria unloading of new calandria from vehicle by their resources shifting of new calandria at the site fitting and erection of calandria at the place of old calandria with shell fitting of bottom cone of calandria inlet vapour or exhaust steam connection water line connection and making all other connection to run the body complete in all respect, dismantling of our old exhisting 600mm valve of 400 hp spray pump along with both side reducer providing support to to delivery line fitting and erection of new in all respect along with successful trial, dismantling of the existing vacuum crystallizer from ramala sugar mill,including safe removal of all connected pipelines,supports and accessories loading the dismantled vacuum crystallizer on their vehicle to nanauta sugar mill,unloading at site ,shifting to the designated location in the boiling house erection and complete installation with all necessary piping,structural modifications,and accesories required for successful commissioning the job shall be completed in all respects and made ready for smooth operation, dismantling ,fabrication and erection of m s pipe line including bend or flange etc 2 inch diameter, dismantling ,fabrication and erection of m s pipe line including bend or flange etc 3 inch diameter, dismantling ,fabrication and erection of m s pipe line including bend or flange etc 4 inch diameter, dismantling,fabrication and erection of m s pipe line including bend or flange etc 6 inch diameter, dismantling ,fabrication and erection of m s pipe line including bend or flange etc 8 inch diameter, dismantling ,fabrication and erection of m s pipe line including bend or flange etc 10 inch diameter, dismantling fabrication and erection of bend size- 3 inch diameter ms, dismantling fabrication and erection of bend size- 4 inch diameter ms, dismantling fabrication and erection of bend size- 6 inch diameter ms, dismantling fabrication and erection of bend size- 8 inch diameter ms, dismantling fabrication and erection of nipple size- 1inch diameter ms, dismantling fabrication and erection of nipple size- 2 inch diameter ms, dismantling fabrication and erection of nipple size- 3 inch diameter ms, dismantling fabrication and erection of nipple size- 6 inch diameter ms, dismantling fabrication and erection of nipple size- 8 inch diameter ms, dismantling fabrication and erection of tee size- 8 inch diameter ms, dismantling fabrication and erection of tee size- 10 inch diameter ms, dismantling fabrication and erection of flange size- 4 inch diameter ms, dismantling fabrication and erection of flange size- 6 inch diameter ms, dismantling fabrication and erection of flange size- 8 inch diameter ms, dismantling fabrication and erection of flange size- 10 inch diameter ms, dismantling fabrication and erection of reducer size-6 inch diameter ms, dismantling fabrication and erection of reducer size-8 inch diameter ms, dismantling fabrication and erection of reducer size-10 inch diameter ms, dismantling ,fitting of valve size- 3 inch diameter, dismantling,fitting of valve size- 6 inch diameter, dismantling,fitting of valve size- 8 inch diameter, dismantling,fitting of valve size- 10 inch diameter, dismantling fabrication and fitting of man hole, dismantling , fabrication and erection of platform by using old new plate, fabrication and erection of cat or monkey ladder, fabrication and erection stair case, fabrication and erection of railing from old material, dismantling of ms heavy structure or tank, dismantling of ms light structure, fabrication and erection light structure, fabrication and erection heavy structure, ss plate lining in different size for various equipments, fabrication & erection of complete square rectangular round tank with conical bottom, fabrication and patchwork of equipments using old new ms plate by 6 8 mm thick plate over round vessels any vessels, fabrication of pump bed with pump reduction gear and motor alignment up to 7 5 h p, fabrication of pump bed with pump reduction gear and motor alignment up to 10 h p, fabrication of pump bed with pump reduction gear and motor alignment up to 15 h p, fabrication of pump bed with pump reduction gear and motor alignment up to 30 h p, fabrication of pump bed with pump reduction gear box and motor alignment above 100 hp

Agency / Dept : uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Tender Value : 2000000
Due Date : Jul 15, 2026
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16042326
live Tender
Location : muzaffarnagar , uttar pradesh
Source : GEM Tenders
live Tender

tender for erection and fabrication work b erection and fabrication work b 1 , erection and fabrication work b 2 , erection and fabrication work b 3 , erection and fabrication work b 4 , erection and fabrication work b 5 , erection and fabrication work b 6 , erection and fabrication work b 7 , erection and fabrication work b 8 , erection and fabrication work b 9 , erection and fabrication work b 10 , erection and fabrication work b 11 , erection and fabrication work b 12 , erection and fabrication work b 13 , erection and fabrication work b 14 , erection and fabrication work b 15 , erection and fabrication work b 16 , erection and fabrication work b 17 , erection and fabrication work b 18 , erection and fabrication work b 19 , erection and fabrication work b 20 , erection and fabrication work b 21 , erection and fabrication work b 22 , erection and fabrication work b 23 , erection and fabrication work b 24 , erection and fabrication work b 25 , erection and fabrication work b 26 , erection and fabrication work b 27 , erection and fabrication work b 28 , erection and fabrication work b 29 , erection and fabrication work b 30 , erection and fabrication work b 31 , erection and fabrication work b 32 , erection and fabrication work b 33 , erection and fabrication work b 34 , erection and fabrication work b 35 , erection and fabrication work b 36 , erection and fabrication work b 37 , erection and fabrication work b 38 , erection and fabrication work b 39 , erection and fabrication work b 40 , erection and fabrication work b 41 , erection and fabrication work b 42 , erection and fabrication work b 43 , erection and fabrication work b 44 , erection and fabrication work b 45 , erection and fabrication work b 46 , erection and fabrication work b 47 , erection and fabrication work b 48 , erection and fabrication work b 49 , erection and fabrication work b 50 , erection and fabrication work b 51 , erection and fabrication work b 52 , erection and fabrication work b 53 , erection and fabrication work b 54, erection and fabrication work b,cutting and removing the weak/broken channel in the weight channel bed of the juice/water scale, fabricating a new one as before, installing it, and conducting a trial., fabricating and installing new rods/guides for the weak/broken guides of the filling tank rods of the juice weighing scale., cutting and replacing the weak/broken bottom cone of the weighing scale tank for juice, maceration water, and final molasses with a new bottom cone as per the old one, and conducting a complete trial., cutting and removing the weak/broken bottom and side plates of the measured juice receiving tank of the juice weighing system, installing old/new plates as per instructions, and conducting a leak-proof trial., cutting and removing the catcher installed on the raw juice pump, fabricating a new catcher, installing it in place, making all connections as before, and conducting a leak-proof trial., for hydraulic testing of pan, quad body, vapour line, and juice heaters, cutting the inlet and outlet vapour pipes and welding blind plates, and after hydraulic testing, cutting and removing the blinds and welding the vapour pipe again with leak-proof welding from inside and outside., repairing the cells, ceiling baffle plates, bottom plates, or weak parts of condensate bottles and syrup receiving bottles of semi kestner, vapour cell, quad body juice heater, and vapour line juice heater, and conducting a water filling test., dismantling the oval-shaped juice entry box in the juice heater, replacing all four weak/broken nipples, fitting both flanges for double beat valves, repairing and fitting the box, and fitting the double beat valve and conducting a leak-proof test., cutting and removing all the leaking partition plates of all juice heaters, installing new 8/10 mm plates, doing leak-proof welding of the wet ring, and conducting a satisfactory trial while protecting the existing tubes., dismantling the weak m.s. strip of the partition plate on both sides of the juice heaters, grinding the cut face, fabricating and installing a new 25 mm x 5 mm m.s. strip, and fitting rubber., cutting the weak/broken bottom cone of the recovery tower of the juice sulphiter, fabricating a new cone from 10/12 mm thick m.s. plate as per sample, fitting it in place, and doing leak-proof welding., strengthening the weak/broken horizontal beams on all four sides of the juice sulphiter base by installing 12 mm thick plates inside them for necessary strengthening., dismantling the weak/broken bottom cones and top cones of the juice/syrup sulphiter, fabricating new ones as per sample, fitting them, doing leak-proof welding from inside and outside, and conducting a satisfactory water filling and trial., removing the weak/broken baffle plates/grids of the syrup sulphiter tower, performing necessary repairs, fitting them in place, and conducting a leak-proof trial., lowering both delivery lines from the syrup pump to the syrup sulphiter, heating them, cleaning them thoroughly, replacing leaking pipe lines, installing valves, bends, nipples, etc., refitting the lines, and conducting a leak-proof trial., removing the recovery tower installed on top of the syrup/juice sulphiter, repairing the leaking shell by fabricating a new shell from new/old plate as per instructions, fitting it, reinstalling the tower in place, and conducting a leak-proof trial., cutting the weak parts of the weak shell of the juice/syrup sulphiter/clarifier, fabricating new ones from new/old 10/12 mm plate as per instructions, installing them in place, doing leak-proof welding from inside and outside, and conducting a trial., cutting and removing the weak/broken secondary gas cooler of the sulphur furnace (juice/syrup), fabricating a new cooler from 10/12 mm thick plate as per the old one, fitting it in place, making all connections as before, and conducting a leak-proof gas trial., cutting and removing the weak/broken cooling pipes of the gas coolers of sulphur furnaces installed for juice/syrup at the sulphur furnace station, fabricating new pipes as per the old ones, fitting them as before, and conducting a leak-proof trial., cutting and removing the weak gas headers of the sulphur furnaces, fabricating and installing new headers as per the old ones., dismantling and removing the weak/broken sulphur melters of the sulphur furnaces, fabricating new ones as per sample, installing them in place, making all connections, and conducting a satisfactory leak-proof trial., removing the weak/broken after burner of the sulphur furnaces, fabricating a new one as per sample, erecting it in place, and conducting a trial., repairing/replacing the weak/leaking water jacket on the sulphur furnace and conducting a leak-proof water trial., cutting and removing the weak 10 mm m.s. and intermediate bottom trough of the first compartment of the juice clarifier, fabricating segments from 10 mm m.s. and 6 mm new plates as per the old intermediate bottom, fitting them, doing leak-proof welding with the mud boot and cell, providing support underneath with t-iron/angle iron for strengthening, and conducting a leak-proof trial., dismantling the weak/broken juice box of the juice clarifier, fabricating a new one as per the old one, fitting it in place, repairing and installing the valve and spindle, and conducting a trial., cutting and removing the old weak mud boots of the juice clarifier, fabricating and installing new ones, and welding arms, etc., cutting and removing the bottom plate of the juice clarifier, fabricating and installing a new 10 mm plate in its place, and providing support by installing angle channels underneath., dismantling and lowering the coil of the clarifier, cleaning it, replacing leaking flanges/pipes, fabricating and fitting the coil, and making holes as per the profile., cutting and removing the weak plate of the mud scraper in the clarifier, installing a new plate, fitting the scraper, and conducting a trial., dismantling the weak pipe of the mud scraper in the clarifier, installing a new pipe, and installing the mud scraper in it., fitting the 800/900 mm diameter rubber seated type angle valve in the steam/vapour line of the quad, semi-kestner, and vapour cell installed in this mill as per instructions, and conducting a leak-proof trial., for complete retubing of the quad body, cutting and lowering the bottom saucer of the calandria, after fitting the tubes, conducting hydraulic testing of the calandria, then doing leak-proof welding of the bottom saucer from inside and outside, and conducting water and vacuum trials., dismantling the weak/broken vapour/exhaust steam lines of semi-kestner/vapour cell/quad body/pans, fabricating new lines from 8.0/10.0 mm thick m.s. plate as per the old ones, erecting the new lines, doing leak-proof welding, and conducting successful water and steam trials., cutting and removing the weak/broken juice distributor/down take pipe in the quad bodies, and fabricating and installing a new one., cutting and replacing the weak/broken manholes in the pan, door, sulphur furnace, quad bodies, cell, and bottom saucer with new manholes as per the old ones., dismantling and removing the weak/broken umbrella of semi-kestner/vapour cell/quad bodies and pans, fabricating a new umbrella as per the old one, providing necessary supports, and erecting the umbrella., fabricating and installing t-rings from 900 to 1100 diameter m.s. plate or angle iron to provide external strength to the vapour pipes of pan and quad., cutting and removing the weak/broken ammonia gas headers of the quad bodies, fabricating and erecting new headers, installing nipples, valves, flanges, etc., and conducting a leak-proof trial., removing the weak shell of semi-kestner, vapour cell, and quad body, fabricating a new one as before, erecting it in place, and conducting a leak-proof trial., dismantling the weak vapour pipe between the quad bodies on the evaporator, fabricating and installing a new vapour pipe of 600, 700, 800 mm diameter from new/old plate, doing leak-proof welding, and conducting a water trial., cutting and removing the leaky/weak external catcher in the vapour pipe of the evaporator and pans, fabricating a new one including internals as per sample, fitting it in place, doing leak-proof welding, and conducting a successful water filling/vacuum trial., removing the top plate of the external catcher in the vapour pipe of the evaporator and pans, performing necessary repairs on the weak internal/cone/shell, etc., reinstalling the top plate, doing leak-proof welding, and conducting a successful water filling/vacuum trial., cutting and removing the weak/broken agitator of the 10 inch x 20 inch vacuum filter, fabricating a new one as per the old one, fitting it in place, and conducting a successful trial., cutting and removing the weak/broken agitator of the 8 inch x 16 inch vacuum filter, fabricating a new one as per the old one, fitting it in place, and conducting a successful trial., cutting and removing the weak/broken mud tray of the vacuum filter, fabricating a new mud tray from new/old plate, fitting it in place, replacing the weak/leaking side plates of the vacuum filter, and conducting a satisfactory water trial., cutting and removing the weak/broken parts of the agitator of the 10 inch x 20 inch vacuum filter and performing necessary repairs as per the old one., cutting and removing the weak taper cone of the 40-ton capacity pan, fabricating and installing a new one from 12/16 mm plate as per sample, making all connections as before, doing leak-proof welding, and conducting a successful water filling and vacuum trial., cutting and removing the weak/broken parts of the agitator of the 8 inch x 16 inch vacuum filter and performing necessary repairs as per the old one., dismantling the bagassilo cyclone installed at the vacuum filter station, repairing the leaking parts, performing necessary repairs, fitting it in place, and making all connections as before., cutting and removing the weak/broken shell of the mud mixer, fabricating a new shell from new/old plate, installing it in place, and conducting a successful trial., cutting and removing the weak/broken mud discharge chutes at the discharge end of the mud conveyor belts, fabricating and installing new ones from old plate as before, and conducting a trial., dismantling and removing the weak/broken condenser bottle of the vacuum filters, fabricating a new one as per sample, installing it, and conducting a successful vacuum trial., removing the weak/broken foundation bolts/bed of pumps in the boiling house, fabricating new channel beds, installing new foundation bolts in the pits provided by civil, placing the pump and motor, making related connections and alignment, and conducting a satisfactory trial., providing support for so2 gas lines using old m.s. pipes.

Agency / Dept : uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Tender Value : 1738793
Due Date : Jul 15, 2026
View Documents
T18 Ref No : 16007857
live Tender
Location : panipat , haryana
Source : GEM Tenders
live Tender

tender for tube, superheater ii, 51x4.5mm, finned, hrsg - 1310305774 , tube, superheater i, 51x4.5mm, finned, hrsg - 1310305784 , tube, economiser finned type, module-hrsg- 1310304913 , evaporator tube finned, module, hrsg - 1310304883 , furnace tubes, 51x4.5 hrsg, bhel- 1310304833

Agency / Dept : indian oil corporation limited IOCL
Tender Value : 0
Due Date : Jul 11, 2026
View Documents
T18 Ref No : 16008035
live Tender
Location : bulandshahr , uttar pradesh
Source : GEM Tenders
live Tender

tender for instrument item 1 , instrument item 2 , instrument item 3 , instrument item 4 , instrument item 5 , instrument item 6 , instrument item 7 , instrument item 8 , instrument item 9 , instrument item 10 , instrument item 11 , instrument item 12 , instrument item 13 , instrument item 14 , instrument item 15 , instrument item 16 , instrument item 17 , instrument item 18 , instrument item 19 , instrument item 20 , instrument item 21, supply of insturment items 2, l1 600 thermowell 8x300 mm (connecting fitting 1/2 inch) furnace temperature, 20 selec make, pid controller(honey well-1040), push fitting 1/2 inchx8mm, push fitting 1/4 inchx8mm, 3 way manifold for dpt level transmitter, 2 way manifold for pressure transmitte, red thermometer alcohol filled ,(0-110 c) length-12 inch, push fitt connector 1/4inch tube size 10mm janatics make, push fitt connector 1/4 inch tube size 8mm janatics make, pressure gauge dia 6 inch 3/8 inch fitting heavy duty s.s. (h-guru make), 8mm thickness, 200mm lenght rtd, (ptx100), 8mm thickness, 200mm lenght rtd, pneumatic positioner air to open (4-20) ma single direction, level transmitter for open tank(raw juice) abb make size-1/2 inch-, 1/2 inch-od nptm connector, rotary disc valve 1/2 inch (airmax make), rotary disc valve 1/4 inch (airmax make), push fitting t type -1/2 inch, heavy duty pressure gauge having ss-316 internal fitting & body range (0-28) kg /cm2 dial size -6 inch ,3/8 inch bsp bottom fitting (h guru make), temperature gauge mercury filled stem type having copper/ss internal fitting range (0-120 c) (h-guru make)

Agency / Dept : uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Tender Value : 334000
Due Date : Jul 13, 2026
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15898949
Location : lucknow , uttar pradesh
Source : GEM Tenders

corrigendum tender for high temperature furnace with gas (programmable dual zone / sliding tube furnace) facility (q3)

Agency / Dept : hindustan aeronautics limited HAL
Tender Value : 0
Due Date : Jun 22, 2026
View Documents
Published By

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Tube Furnace. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Tube Furnace sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Tube Furnace Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Tube Furnace, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Tube Furnace Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Tube Furnace Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Tube Furnace.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Tube Furnace depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Tube Furnace Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Tube Furnace bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Tube Furnace. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Tube Furnace, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Tube Furnace, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Tube Furnace?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Tube Furnace tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Tube Furnace?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Tube Furnace, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Tube Furnace is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All