sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

98Latest Thread mill Tenders List

Latest Thread mill Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Thread mill tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Thread mill tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Thread mill Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Thread mill tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Thread mill Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Thread mill Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Thread mill Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Thread mill tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Thread mill Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Thread mill sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Thread mill tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Thread mill tenders.

Is EMD mandatory for all Thread mill tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Thread mill work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Thread mill tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Thread mill Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17518785
Location : tiruvallur , tamil nadu
Source : GEM Tenders
NEW TENDER
corrigendum tender for m30 x 2 thread mill with spares , m24 x 3 thread mill with spares , carbide insert for dia 28" u" drill , carbide insert for dia 21'u drill
Agency / Dept :
armoured vehicles nigam limited AVNL
Due Date :
Oct 06, 2026 (6 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17498068
Location : kanpur , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for coated solid carbide thread mill cutter m8x1.25
Agency / Dept :
advanced weapons and equipment india limited AWEIL
Due Date :
Oct 12, 2026 (12 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17361344
Location : tiruchirappalli , tamil nadu
LIVE TENDER
tender for square milling insert, inner thread insert confirms to iso catalogue id: 44 315 901 - pn120 make/brand: widia/ korloy/ sandvik-coromant/ tabikut - warranty period: 12 months after the date of delivery
Agency / Dept :
southern railway SR
Due Date :
Oct 06, 2026 (6 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17375793
Location : hyderabad , telangana
LIVE TENDER
tender for tggenco btps stage ii bm division reconditioning of worn-out lower journal housing including lock nut threading for bowl mills type xrp-943 of units-iii and iv stage-ii btps, tggenco-btps-stage-ii
Agency / Dept :
telangana state power generation corporation limited TSGENCO
Due Date :
Oct 05, 2026 (5 days left)
Tender Value :
10.5L
View Documents
T18 Ref No : 17279701
Location : bangalore , karnataka
LIVE TENDER
tender for supply of mill made pillow cover for 1a coach., mill made pillow cover for 1a coach, (i) colour - white. (ii) overall size 64 x 49cm. (iii) fa bric as per variety no. 03 of table 1 of is 18739:2024 ( or latest). (iv) anti-microbial properties are as p er para 3.9 of is 18739:2024 ( or latest). (v) whiteness index is as per para 3.10 of is 18739:2024 ( or l atest). (vi) dimensions and printing as per drg. no. nr/linen/pillow cover-1a/2024 (except printing of b is marking and zonal railways marking). (vii) 'indian railways' marking in place of 'northern railw ay' to be rotary printed with reactive dye both in hindi and english on two longitudinal running strips. ( viii) woven tag marked with manufacturers name, name of material, blend composition & calendar mar king should be stitched along with seam at one corner edge. (ix) sewing thread to be used as per para 3.4(b) of is 18739:2024 (or latest) - warranty period: 30 months after the date of delivery -quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs
Agency / Dept :
south western railway SWR
Due Date :
Oct 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17397144
Location : VISAKHAPATNAM , andhra pradesh
Source : GEM Tenders
LIVE TENDER
Tender For M4 TAP SET , M5 TAP SET , M6 TAP SET , M8 TAP SET , M10 TAP SET , M12 TAP SET , M14 TAP SET , M16 TAP SET , M18 TAP SET , M20 X 1.5 TAP SET , T MAX MILLING CARBIDE INSERT TRIANGLE SHAPE , TRANSPARENT FIBER GLASS TUBE OD 50MM ID 44MM , ACRYLIC SHEET , EBONITE ROD DIA 40MM , CARBIDE END MILL CUTTER DIA 4MM , CARBIDE END MILL CUTTER DIA 5MM , CARBIDE END MILL CUTTER DIA 6MM , CARBIDE END MILL CUTTER DIA 8MM , CARBIDE END MILL CUTTER DIA 10MM , CARBIDE END MILL CUTTER DIA 12MM , CARBIDE END MILL CUTTER DIA 14MM , CARBIDE END MILL CUTTER DIA 16MM , CARBIDE END MILL CUTTER DIA 18MM , CARBIDE END MILL CUTTER DIA 20MM , CARBIDE END MILL CUTTER DIA 25MM , MULTI CUT VERTICAL BAND SAW BLADE M42 GRADE 4570X34X1.1MM , OD THREAD CUTTER , ID THREAD CUTTER ABOVE 100MM , ID THREAD CUTTER BELOW 50MM , OD GROOVING CUTTER , BORING BAR FOR ABOVE 100 DIA , BORING BAR FOR BELOW 60 DIA , STEP TURNING CUTTER LEFT HAND SIDE , STEP TURNING CUTTER RIGHT HAND SIDE , HEAVY METAL REMOVING CUTTER , ID GROOVING CUTTER , BORING BAR FOR BELOW 25MM DIA , POWER HACK SAW BLADE HIGH SPEED STEEL 450X40X2.0MM 6 MIRINDA , SYNTHETIC SHEET 8MM THICKNESS , PITCH GAUGE METRIC , PITCH GAUGE BRITISH , INSIDE SPRING CALIPER RANGE 8 INCH , MT 2 SLEEVE , MT 3 SLEEVE , MT 4 SLEEVE , MT 5 SLEEVE , A4 CENTER DRILL, PROCUREMENT OF MACHINE TOOLS, M4 TAP SET, M5 TAP SET, M6 TAP SET, M8 TAP SET, M10 TAP SET, M12 TAP SET, M14 TAP SET, M16 TAP SET, M18 TAP SET, M20 X 1.5 TAP SET, T MAX MILLING CARBIDE INSERT TRIANGLE SHAPE, TRANSPARENT FIBER GLASS TUBE OD 50MM ID 44MM, ACRYLIC SHEET, EBONITE ROD DIA 40MM, CARBIDE END MILL CUTTER DIA 4MM, CARBIDE END MILL CUTTER DIA 5MM, CARBIDE END MILL CUTTER DIA 6MM, CARBIDE END MILL CUTTER DIA 8MM, CARBIDE END MILL CUTTER DIA 10MM, CARBIDE END MILL CUTTER DIA 12MM, CARBIDE END MILL CUTTER DIA 14MM, CARBIDE END MILL CUTTER DIA 16MM, CARBIDE END MILL CUTTER DIA 18MM, CARBIDE END MILL CUTTER DIA 20MM, CARBIDE END MILL CUTTER DIA 25MM, MULTI CUT VERTICAL BAND SAW BLADE M42 GRADE 4570X34X1.1MM, OD THREAD CUTTER, ID THREAD CUTTER ABOVE 100MM, ID THREAD CUTTER BELOW 50MM, OD GROOVING CUTTER, BORING BAR FOR ABOVE 100 DIA, BORING BAR FOR BELOW 60 DIA, STEP TURNING CUTTER LEFT HAND SIDE, STEP TURNING CUTTER RIGHT HAND SIDE, HEAVY METAL REMOVING CUTTER, ID GROOVING CUTTER, BORING BAR FOR BELOW 25MM DIA, POWER HACK SAW BLADE HIGH SPEED STEEL 450X40X2.0MM 6 MIRINDA, SYNTHETIC SHEET 8MM THICKNESS, PITCH GAUGE METRIC, PITCH GAUGE BRITISH, INSIDE SPRING CALIPER RANGE 8 INCH, MT 2 SLEEVE, MT 3 SLEEVE, MT 4 SLEEVE, MT 5 SLEEVE, A4 CENTER DRILL
Agency / Dept :
indian navy
Due Date :
Oct 12, 2026 (12 days left)
Tender Value :
11
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17460288
Location : daskroi , gujarat
Source : GEM Tenders
LIVE TENDER
tender for boq for mh and tr trade - slotter , assorted tools and bit holders for lathe shaper slotter and planner , table chuck 75 mm jaw swivel base , radius turning attachment , compound angle vice standard sine , universal table angle plate , shaper tool holder turret type to suit the machine , base chuck for slotter to suit the machine , shaper indexing center to suit the machine , knurling tools set of 3 straight and diamond , carbide tipped tools of different sizes and shapes throw away tips , inductor 400 turns 200 turns 600 turns 1200 turns i core e core u core , i mounting plate , milling cutter , milling cutter shell end mill dia 75 mm 50 27 mm , milling cutter t slot cutter with parallel shank dia 17.5 8 mm , milling cutter concave dia 63 x 6 radius x 27 mm bore diameter , milling cutter convex dia 63 x 6 radius x 27 mm bore diameter , telescopic gauge 8 mm to 150 mm in set , centre gauge com 60 degree 55 degree and 29 degree , gauge screw pitch metric -0.25 to 6 mm in set , planer gauge standard size , caliper outside spring joint 150 mm , caliper odd-leg firm joint 150 mm , reamer machine straight flute 6 to 25 mm , plain ring and plug gauge , hand chaser m 12 and m 16 external , hand chaser m 12 and m 16 internal , divider spring joint 150 mm , tool bits , boring tool holder 6 mm sq tool bit , parting tool holder with h.s.s. blade standard , tool bit assorted sizes on holder , gauge - radius set 1 mm to 25 mm by 0.5 mm , angle gauge for tool grinding standard , revolving cente , combination set 300 mm complete set , knurling tool revolving head , drill angle gauge 45 degree60 degree 90 degree , wheel dresser diamond inserted 0.75 or 1 carat , sine bar with centers 200 mm , angle plate , v block , morse taper sleeves no , twist drill , drill twist set taper , reamer adjustable 10 to 20 mm , tool makers button standard , spare grinding wheel type , tool cemented carbide , thread ring gauge m20 and m21 , machine chaser , gauge drill grinding standard , magnetic chuck 150 mm dia circulartype, slotter adjustable stroke mm 10 to 150 longitudinal movement (mm) 200, assorted tools and bit holders for lathe shaper slotter and planner, table chuck 75 mm jaw swivel base, radius turning attachment, compound angle vice (standard sine), universal table angle plate 150 x 150 x 150 mm, shaper tool holder turret type to suit the machine, base chuck for slotter to suit the machine, shaper indexing center to suit the machine, knurling tools (set of 3) straight and diamond, carbide tipped tools of different sizes and shapes (throw away tips), inductor 400 turns 200 turns 600 turns 1200 turns) i-core e-core u- core, i. mounting plate, milling cutter shell end mill dia 50 x 36 x 27 mm preferably inserted tip type, milling cutter shell end mill dia 75 mm 50 27 mm, milling cutter t slot cutter with parallel shank dia 17.5 8 mm, milling cutter concave dia 63 x 6 radius x 27 mm bore diameter, milling cutter convex dia 63 x 6 radius x 27 mm bore diameter, telescopic gauge 8 mm to 150 mm in set, centre gauge com 60 degree 55 degree and 29 degree, gauge screw pitch metric -0.25 to 6 mm in set, planer gauge standard size, caliper outside spring joint 150 mm, caliper odd-leg firm joint 150 mm, reamer machine straight flute 6 to 25 mm, plain ring and plug gauge, hand chaser m 12 and m 16 external, hand chaser m 12 and m 16 internal, divider spring joint 150 mm, tool bits assorted shaped, boring tool holder 6 mm sq tool bit, parting tool holder with h.s.s. blade standard, tool bit assorted sizes on holder, gauge - radius set 1 mm to 25 mm by 0.5 mm, angle gauge for tool grinding standard, revolving center to suit lathe tailstock standard, combination set 300 mm complete set, knurling tool revolving head rough med fine diamond and straight, drill angle gauge 45 degree60 degree 90 degree, wheel dresser diamond inserted 0.75 or 1 carat, sine bar with centers 200 mm, angle plate, v block 150by100by100 mm with clamp hardened and ground, morse taper sleeves no, twist drill straight shank 3 to 12 mm by 1 mm, drill twist set taper shank 14 mm to 20 mm by 1 mm, reamer adjustable 10 to 20 mm, tool makers button standard, spare grinding wheel type for carbide tool, tool cemented carbide, thread ring gauge m20 and m21, chaser, gauge drill grinding standard, magnetic chuck 150 mm dia circulartype
Agency / Dept :
department of employment and training DET
Due Date :
Oct 08, 2026 (8 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17460293
Location : surat , gujarat
Source : GEM Tenders
LIVE TENDER
tender for metal and hardware items - 25mm , drier or filter for refrigeration , drill bit 6,10 and 12mm , drill bit hss 3 to 6 mm , drill bit set 1 to 12mm , drill bit set parallel shank 2 to 12mm , drill bit for metal , ewc strap pvc flush tank , con flush tank and frame with cover plate full set , fiber glass 1850x900x6mm , file handle wooden 4.5inch , file handle wooden 3inch , filler for paint , flare nut 1 by 4 inch , frame set for bathtub , gasket sheet 2mm thickness , gi nut 19mm , gi washer 40mm , gi bend 12.7mm , gi fennel with wire mesh , hardwood 50x20mm , hardwood 50x38mm , hardwood 150x25mm , hardwood 75x50mm , hardwood 120x38mm , hardwood 100x25mm , hardwood 50x50mm , hardwood 210x25mm , hardwood 200x25mm , hardwood round dia 6mm , hinges 2inch , hss drill bit 9 mm to 12 mm , hydraulic power stearing oil , hss hacksaw blade 300x10x1.25mm , hacksaw machine blade 400x25x1.25mm , hss tool 12x12x100mm , hss tool bit 6 x 6 x100mm , knitting hand gloves , khilli 17 by 1 inch , lubrication oil viscocity 100 hermony-100 , neon sign tube 5 mtr , nrv valve 1inch , nut with bolt and washer 8mm , nut with bolt and washer 10mm , nut with bolt and washer 12mm , nut with bolt and washer 14mm , pipe flexible 16mm , pipe flexible 20mm , plywood laminated sheet 200x150x3mm , pneumatic pu tube 8mm od by 5mm id , pneumatic pu tube 12mm od by 8mm id , prodot dry ink toner powder 500gm , pvc coupler 19mm , pvc milinex paper , putty applicator , quarter pin set of 10 , r22 refrigerant charging line set of 3 , r32 refrigerant charging line 500 psi , r410 a refrigerant charging line set of3 , rawl plug pvc 6x30mm , rawl plug pvc 8x30mm , rawl plug pvc 10x35mm , refrigeration compressor oil 68 , refrigeration charging nrv , ribbon for epson dot metrix printer lx-310 , rivet al 2mm , rivet al pop 4mm , rivet tin mens , ro filter provision cock , roller paint 2inch and 4inch , rubber sheet 3mm , sand paper zero grade , sand , screw cheese head m6 , screw cap m6 , screw head csk m4 , s.s electrode 2.5mm dia , sensor tap , single lever diverter 2 way and 3 way , sliding glass door 1200x600x6mm , soft wood 50x38mm , soft wood 75x25mm , solution upvc 100ml , ss soap dish , ss tumbler holder , ss toilet paper holder , ss towel bracket 18inch , sunmica 1mm -2440x1220mm , teakwood 75x25mm , teakwood 20x10mm , teakwood 50x25mm , teakwood 50x50mm , teakwood 375x25mm , tool carbide rh 5 by 8inch x 5 by 8 inchx4inch , tool carbide rh tipped boring p-30 , telescopic pipe cutter , wall hang ewc , waste pipe 2 meter , water leakage testing assembly , water paper 400grit , water paper 1500grit , water paper 2000grit , water paper 2500grit , wheel balancing weight 5,10,15,20 , white cement , wire nail 25mm , wire nail 37mm , tickwood batten patti 300x25x12mm , wooden primer , wooden screw 12 by 5mm , wooden screw 35 by 6mm , wooden screw 35 by 8 mm , wooden screw 30 by 8mm, alluminium round bar 25 mm, alluminium e section 25x12x6m, alluminium tube dia 8mm, aluminium pipe 1 by 4 inch, al pieces 1.5cm, bare al wire 10 swg, bare al wire 16 swg, c.i. 50x6mm, c.i. gear blank dia.100x25mm, ci round bar dia 100mmx25mm, copper flat 50x3mm, copper pieces-1.5 cm, 2 mm square copper plate 10cmx10cm, metal sheet 75cmx75cmx2mm, zinc piece 1.5cm, abro tape roll, ampire pvc sleeve 2mm, ampire pvc sleeve 3mm, ampire pvc sleeve 4mm, ampire pvc sleeve 6mm, bath tub accessories 5 and half x 2 and half with waste coupling and over flow set, bench grinding wheel dia.200mm, black board colour, black board duster, brake oil dot-4, brass soft wire brush 28mmx290, brass hex end cap female npt thread half inch, quarter inch,5 by 8 inch,3 by 8inch, break oil dot-4, butane gas 250gm, cement, control valve 1inch, collet chuck er32 5-6mm, collet chuck er32 7-8mm, copper filter or drier silica 1 by 4 inch, copper filter or drier silica 3 by 8inch, cotton binding tape 12mm width reel, cotton binding thread, cotton tape 12mm, cp angle cock 2 in 1 0.5inch, cp bib cock 1by 2 inch, cp bottle trap, cp pillar cock 15mm, cp wall mixer tele shower, cp tele shower, cp ext long nipple halfx2.5inch, cp push cock for urinal half inch, cutting disc 4inch, cylindrical pin dia 4mm, decarbonising spray, degreasor, cerclip set of 10, dlc solid end mill cutter dia 08mm 3 flute length 75mm, dlc solid end mill cutter dia 10mm 3 flute length 75mm, dlc solid end mill cutter dia 12mm 3 flute length 75mm, disc sand paper grit80, dovel pin m6 25mm, dovel pin m4 25mm, drier or filter for refrigeration, drill bit 6,10 and 12mm, drill bit hss 3 to 6 mm, drill bit set 1 to 12mm, drill bit set parallel shank 2 to 12mm, drill bit for metal, ewc strap pvc flush tank, con flush tank and frame with cover plate full set, fiber glass 1850x900x6mm, file handle wooden 4.5inch, file handle wooden 3inch, filler for paint, flare nut 1 by 4 inch, frame set for bathtub, gasket sheet 2mm thickness, gi nut 19mm, gi washer 40mm, gi bend 12.7mm, gi fennel with wire mesh, hardwood 50x20mm, hardwood 50x38mm, hardwood 150x25mm, hardwood 75x50mm, hardwood 120x38mm, hardwood 100x25mm, hardwood 50x50mm, hardwood 210x25mm, hardwood 200x25mm, hardwood round dia 6mm, hinges 2inch, hss drill bit 9 mm to 12 mm, hydraulic power stearing oil, hss hacksaw blade 300x10x1.25mm, hacksaw machine blade 400x25x1.25mm, hss tool 12x12x100mm, hss tool bit 6 x 6 x100mm, knitting hand gloves, khilli 17 by 1 inch, lubrication oil viscocity 100 hermony-100, neon sign tube 5 mtr, nrv valve 1inch, nut with bolt and washer 8mm, nut with bolt and washer 10mm, nut with bolt and washer 12mm, nut with bolt and washer 14mm, pipe flexible 16mm, pipe flexible 20mm, plywood laminated sheet 200x150x3mm, pneumatic pu tube 8mm od by 5mm id, pneumatic pu tube 12mm od by 8mm id, prodot dry ink toner powder 500gm, pvc coupler 19mm, pvc milinex paper, putty applicator, quarter pin set of 10, r22 refrigerant charging line set of 3, r32 refrigerant charging line 500 psi, r410 a refrigerant charging line set of3, rawl plug pvc 6x30mm, rawl plug pvc 8x30mm, rawl plug pvc 10x35mm, refrigeration compressor oil 68, refrigeration charging nrv, ribbon for epson dot metrix printer lx-310, rivet al 2mm, rivet al pop 4mm, rivet tin mens, ro filter provision cock, roller paint 2inch and 4inch, rubber sheet 3mm, sand paper zero grade, sand, screw cheese head m6, screw cap m6, screw head csk m4, s.s electrode 2.5mm dia, sensor tap, single lever diverter 2 way and 3 way, sliding glass door 1200x600x6mm, soft wood 50x38mm, soft wood 75x25mm, solution upvc 100ml, ss soap dish, ss tumbler holder, ss toilet paper holder, ss towel bracket 18inch, sunmica 1mm -2440x1220mm, teakwood 75x25mm, teakwood 20x10mm, teakwood 50x25mm, teakwood 50x50mm, teakwood 375x25mm, tool carbide rh 5 by 8inch x 5 by 8 inchx4inch, tool carbide rh tipped boring p-30, telescopic pipe cutter, wall hang ewc, waste pipe 2 meter, water leakage testing assembly, water paper 400grit, water paper 1500grit, water paper 2000grit, water paper 2500grit, wheel balancing weight 5,10,15,20, white cement, wire nail 25mm, wire nail 37mm, tickwood batten patti 300x25x12mm, wooden primer, wooden screw 12 by 5mm, wooden screw 35 by 6mm, wooden screw 35 by 8 mm, wooden screw 30 by 8mm, wooden screw 40 by 8mm, wooden screw 50 by 8mm
Agency / Dept :
department of employment and training DET
Due Date :
Oct 08, 2026 (8 days left)
Tender Value :
10L
View Documents
T18 Ref No : 17414608
Location : hyderabad , telangana
Source : GEM Tenders
LIVE TENDER
tender for ct63 104 00713 , ct62 300 01254 , ct62 300 01255 , ct62 300 01093 , ct62 300 01094 , ct62 300 00372 , ct62 104 00131 , ct63 102 00690 , ct63 102 00127 , ht63 105 00128 , ht63 105 00129 , ht63 105 00148 , ct63 102 01002 , ct62 300 01256 , ct62 300 01257 , ct63 105 00108 , ht63 105 00149 , ct63 102 01005 , ct63 104 00667 , ct63 102 00945 , ct63 102 00996 , ct63 102 00281 , ct62 301 00021 , ct62 301 00022 , ct63 104 00030 , ct62 301 00854 , ct63 104 00036 , ct62 301 00404 , ct62 301 00143 , ct62 300 01087 , ct62 300 01231 , ct62 300 01088 , ct62 300 01089 , ct63 102 01009, tool holder, threading inserts 44315901 pn 120, 165 dia chuck for stc15 cnc lathe, 200 dia chuck suitable for stallion 200 cnc lathe, dead centres for stallion 200 hmt make cnc lathe as per drawing enclosed, dead centres for stc15 hmt make cnc lathe as per drawing enclosed, revolving center line center shank mt 5, milling inserts spkn 1504edr, milling inserts spkn 1203 edr, milling inserts tpan 1603 pdr thm k20 or e x actly equivalent, tool holder mvjcl 2525 m 16, tool holder mvvcn 2525 m 16, tool holder pdjnl 2525 m 15, throwaway inserts dnmg 150608mp grade kc5010 make kennametal or equivalent, hss taper shank twist drill bit of 16 mm diameter, hss taper shank twist drill bit of 18 mm diameter, parting inserts a4g0205m02u02gmn make kennametal or equivalent grade kc5010, parting tool holder a4smr 1616 k0214, tool holder pssnr 2525 m12 make widia or equivalent, single point carbide tip brazed tool turning tool iso 1rh 110 x 16 x 16 grade k 20, single point cabide tip brazed tool facing tool iso 2rh 111 x 16 x 16 k 20, single point carbide tip brazed tool cranked knife tool iso 6rh 20 x 20 k 20 thm, single point carbide tip brazed tool cranked knife tool iso 6rh 117 x 16 x 16 k 20, boring tools iso 8r 12 x 12 thm, booring tools iso 8r 8 x 8 thm, tungsten carbide tipped parting tool iso 7r 16 x 16 thm, tungsten carbide tip brazed turning tools iso 9 r 1616 boring tool, straight threading tool 60 degree 16 x 16 thm, hss center drills both end a2.5 6.3 make addison it, hss center drills 3.15mm pilot dia 8mm body dia, kirloskar lathe machine 160 dia chuck1550 model, carbide tipped revolving centers mt4 type, schaublin 125 lathe machine 125 dia chuck, geede weller lathe machine 125 dia chuck, tool holder psbnr 2525 m 12
Agency / Dept :
mishra dhatu nigam limited MIDHANI
Due Date :
Oct 19, 2026 (19 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17496722
Location : mumbai , maharashtra
Source : GEM Tenders
LIVE TENDER
corrigendum tender for cnc inserts cnmg 120404 pm 4235 , cnmg 12 04 08 pr 4335 , vbmt 160404 pm 4225 , od turning rough vbmt 160408 pr 4235 , cnc insert cnmg 12 04 08 pm 4325 , cnmg 09 03 04 pr , cnmg 09 03 08 mn , lt 16 er 15 isok ku 25t , lt 16 er 20 isok ku 25t , lt 16 er 175 isok ku 25t , r166 ol 16 mm01 150 4125 , r166 ol 16 mm01 200 , mb 07 t093 02 10l 1025 , pclnl 2525 m12 , tool holder svjbl2525m 16 , mb a16 16 07 , end mill cutter 6 mm , end mill cutter straight shank 8 mm , end mill cutter straight shank 12 mm , 15mm hss parallel shank end mill cutter , end mill cutter straight shank 16 mm , end mill cutter straight shank 18 mm , 1mm to 10mm straight shank drill bits , hss hand hacksaw blade 18 tpi , circlip plier small size outside , circlip plier small size inside , circlip plier middle size outside , circlip plier middle size inside , 10mm threading die , drill chuck automatic middle size , drill chuck keytype middle size , drill chuck keytype small size , 8 pipe wrench , drill socket taper shank , spanner set mm , spanner set inch , bondtite adhesive 270 gram pack , wd 40 420 ml pack , ptfe teflon tape 12mm x 10meter , gws professional 6 125 angle grinder , hexagonal nut bolt 4mm x 50mm length , hexagonal nut bolt 5mm x 50mm length , hexagonal nut bolt 6mm x 50mm length , hexagonal nut bolt 8mm x 60mm length , hexagonal nut bolt 10mm x 80mm length , hexagonal nut bolt 4mm x 30mm length , hexagonal nut bolt 5mm x 30mm length , hexagonal nut bolt 6mm x 30mm length , hexagonal nut bolt 8mm x 40mm length , hexagonal nut bolt 10mm x 60mm length , allen bolt 4mm x 50mm length , allen bolt 5mm x 50mm length , allen bolt 6mm x 50mm length , allen bolt 8mm x 60mm length , allen bolt 10mm x 80mm length , allen bolt 4mm x 30mm length , allen bolt 5mm x 30mm length , allen bolt 6mm x 30mm length , allen bolt 8mm x 40mm length , allen bolt 10mm x 60mm length, procurement of spares, enclosed
Agency / Dept :
security printing and minting corporation of india ltd SPMCIL
Due Date :
Oct 05, 2026 (5 days left)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Thread Mill. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Thread Mill sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Thread Mill Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Thread Mill, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Thread Mill Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Thread Mill Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Thread Mill.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Thread Mill depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Thread Mill Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Thread Mill bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Thread Mill. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Thread Mill, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Thread Mill, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Thread Mill?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Thread Mill tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Thread Mill?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Thread Mill, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Thread Mill is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All