sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

127Latest Rubber below Tenders List

Latest Rubber below Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Rubber below tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Rubber below tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Rubber below Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Rubber below tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Rubber below Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Rubber below Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Rubber below Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Rubber below tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Rubber below Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Rubber below sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Rubber below tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Rubber below tenders.

Is EMD mandatory for all Rubber below tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Rubber below work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Rubber below tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Rubber below Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17021681
Location : erode , tamil nadu
NEW TENDER
tender for set of o rings for high voltage bushing, set consists of two items as given below: 1. size id 135mm, thickness 3mm - 01 no/set. 2. size id 120mm, thickness 5mm - 01 no/set. material: fluorosilicone rubber mfq, hardness - 65+/-5 shore (a), colour - black., set of o rings for high voltage bushing, set consists of two items as given below: 1. size id 135mm, thickness 3m m - 01 no/set. 2. size id 120mm, thickness 5mm - 01 no/set. material: fluorosilicone rubber mfq, hardness - 65+/-5 shore (a), c olour - black. note: supply by sources as per clw item id: 2101221 in ireps vendor directory. - warranty period: 30 months after the date of delivery -quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs
Agency / Dept :
southern railway SR
Due Date :
Sep 16, 2026 (16 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16875309
Location : sri ganganagar , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for oil seal , oil seal frt , brg set connecting rod , rubber below , gasket turbo charger , rep kit brake chamber , rep kit quick release valve , rep kit , hose outlet , part kit relay valve , weather strip , elastic disc , bearing, mt spares, maruti gypsy, tata 2 point 5 ton, lorry 7 point 5 ton, tatra 6x6
Agency / Dept :
indian army
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16988614
Location : rourkela , odisha
Source : GEM Tenders
LIVE TENDER
corrigendum tender for m8571906185 , m8596221003 , m8596121486 , m8596121398 , m8596121495 , m8596131148 , m8596121501 , m8596131157 , m8596121510 , m8596131166 , m8597111994, busduct flexibles against risk and cost of bhel, insulator support, bus bar rigit joint 0 415kv rigid joint, b duct 0 415kv al flex 1600a 465x125x6, b duct 0 415kv cu flex 1600a 350x80x19, b duct 0 415kv al flex 2000a 460x150x6, b duct 0 415kv cu flex 2000a 350x80x19, b duct 0 415kv al flex 3200a 575x150x6, b duct 0 415kv cu flex 3200a 330x80x19, b duct 0 415kv al flex 4000a 575x200x6, b duct 0 415kv cu flex 4000a 400x45x29, rubber below for main run 1200x500 0 4kv
Agency / Dept :
ntpc sail power company ltd
Due Date :
Sep 04, 2026 (4 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16993240
Location : sri ganganagar , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for rep kit dual brake valve , bush gear assy , gasket turbo charger , rectifire plate , rubber below , tapped roller bearing , oil seal , spider bearing , tie rod end , rep kit quick release valve , ram rep kit , axle bearing , fuel pipe , frt oil seal , hub oil seal, mt spares, tata 2 point 5 ton 715tc, lorry 7 point 5 ton als, maruti gypsy
Agency / Dept :
indian army
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16874961
Location : jammu , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for rewind of submersible motor 7.5 hp , sub cable 4 sqmm 3 core complete. , gm bearing bush , water seal , cable seal , revolving disc , sand guard , dol bush , dol sleave , ss distance sleeve , rottar sleeve turning and grinding , coupling key , impellar key , t nut , guide bush , gm neck ring , nut bolts with washer , rubber packing flange of size 150 mm , cable jointing kit , painting of submersible pump set , ms column pipe 100 mm dia medium grade , labour charges for taking out and relowering , labour charges for opening cutting rewinding , supply installation testing and commissioning , material and labour for making , attending day to day emergency breakdowns , attending day to day emergency breakdowns complaints of damaged , material and labour pcc 1 , supply and fixing rotational moulded , material and labour for disconnecting , supply only anti friction heavy duty , material and labour for removing swt column pipes , material and labour for earthing , supply laying 50 mm bore steel water , supply and fixing in replacement , excavation in trenches not , returning filling in including spreading leveling , removing excavated soil to a distance, repair and replacement to submersible pump set, rewind of submersible motor 7.5 hp, sub cable 4 sqmm 3 core complete., gm bearing bush, water seal, cable seal, revolving disc, sand guard, dol bush, dol sleave, ss distance sleeve, rottar sleeve turning and grinding, coupling key, impellar key, t nut, guide bush, gm neck ring, nut bolts with washer 1 by 2 x 2 inch, rubber packing flange of size 150 mm, cable jointing kit, painting of submersible pump set, ms column pipe 100 mm dia medium grade of 3 mtr in length, labour charges for taking out and relowering the sub pump set from bore well, labour charges for opening cutting rewinding cleaning complete the sub pump for repairing and refixing the same after repairing, assembling testing complete, supply installation testing and commissioning in repairs of sathya sai dosing drum adjustable dozing pump including fixing complete, material and labour for making 100 percentage serviceable to the amf lt panel startor suitable for motors and submersible pump by tracing out defects and replacing unsv parts including control wiring complete. minor parts such as nuts, bolts, washers, thimbles etc shall be deemed to be included in the quoted rate., attending day to day emergency breakdowns complaints of damaged water supply lines of 15 to 25mm bore in distribution system and restoration of water supply by stopping the leakage occured by deputing skilled semi skilled man power for smooth functioning of water supply., attending day to day emergency breakdowns complaints of damaged water supply lines of 40mm to 50mm bore in distribution system and restoration of water supply by stopping the leakage occured by deputing skilled semi skilled man power for smooth functioning of water supply, attending day to day emergency breakdowns complaints of damaged water supply lines of 80mm to 150mm bore in distribution system and restoration of water supply by stopping the leakage occured by deputing skilled semi skilled man power for smooth functioning of water supply, material and labour pcc 1 ration 3 ratio 6 type c1 using 20 mm graded stone aggregate for platform of motor and water storage tank size 1.5 x 1.5 x 0.4m etc incl fair finishing the exposed surfaces even and smooth without using extra cement including necessary form work complete., supply and fixing rotational moulded polyethylene water storage tank inner and out white five layers isi marked cylinderical vertical with closed top hoisted with threaded cap and fixed of capacity 2000 liters each including all accessories including taking down of old broken water tank complete., material and labour for disconnecting and removing the squirrel cage 3 phase 415 volts 50 hz induction motor of 7.5 hp capacity from its foundations by disconnecting electrical connections and motor couplers taking it to workshop for repair and dismantling and opening up of motor removing burnt out winding wires complete cleaning startor and rotor assembly, supply only anti friction heavy duty bearings suitable for 7.5 hp., material and labour for removing swt column pipes upto 100 mm dia with submersible flat cable of any type and dismantling and taking up down submersible pump and motor assembly of capacity 7.5 hp shifting to workshop and removing unserviceable spares replacing with new spares such impeller bushes distance bush seal etc of same specifications type model. removing burnt copper winding from motor and rewinding with same guage and type of insulation copper conductor winding wires and insulation sheets assembling back and testing for proper function including necessary machining works as required bringing back and reinstalling into the swt complete., material and labour for earthing in repalcement complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0mm thick buried directly in ground earth pit not less than 2.25 mtr deep below ground level with top edge of plate not less than 1.5 mtr below normal ground level connected to and including 25 x 4 mm galvanised earth strip by means of bolts nuts check nuts and washers of galvanised standard iron or steel all as specified or indicated in electrical, supply laying 50 mm bore steel water tubing medium grade galvanised with all fittings including short lengths laid in trenches complete with all fittings such as bends elbows tee short pieces connectors back nuts diminishing pieces caps and plugs unions etc including taking down old unsv pipe any type complete, supply and fixing in replacement direct on line starter in sheet metal enclosure for motor rating 415 volts 3 phase 50 hz 9-14 amps relay maximum range of capacity 7.5 hp complete, excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts wells cesspits manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in soft loose soil complete, returning filling in including spreading leveling watering and well ramming in layer not exceeding 25 cms thick after laying and testing of cable complete, removing excavated soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above starting point complete
Agency / Dept :
indian army
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16875603
Location : kolkata , west bengal
Source : GEM Tenders
LIVE TENDER
tender for supply installation testing and commissioning of 1.5 tr hi-wall split systems , supply installation testing and commissioning of 2.0 tr hi- wall split systems , copper refrigerant piping for 1.5tr and 2.0tr hi-wall split ac , drain pipe , outdoor stand for 1.5tr and 2.0tr hi-wall split ac , dismantling of old ac systems, supply installation testing and commissioning of hiwall split ac systems, supplying , installation, testing and commissioning of air cooled hi wall split type air conditioners complete withindoor unit(idu), out door unit (odu), surface / concealed copper refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 mtr(idu to odu), copper power cable upto 3.5 mtr (idu to odu) r-32/r-410/ r-407 green refrigerant wireless remote control, suitable for working between 180- 260v with low & high voltage cutoff and 50 hz ,1 phase ac supply capable of performing cooling, dehumidification, air circulation of following capacity with scroll / rotarycompressor. the system shall be able to deliver 100% of the rated capacity upto 42 degree c. min 5 year original equipment manufacturer (oem) warranty both compressor and printed circuit board (pcb). must comply electrical cable is 694 or is 9968 temperature sensing control is/international electrotechnical commission (iec) 60730,hermetic compressor is 10617, heat exchanger is 11329, capacitor is 2993 and motor is 12615. complete as per cpwd specification and is - 1391 part ii 2023. the system shall be able to operate up to 50 degree c (out door ambient temperature). inverter type cooling with 5 star bee rating, minimum value of iseer 5.6., supplying, installation, testing and commissioning including vaccumiazation and nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for above system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with xple class-o tubular insulation/with class-o closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for suction and liquid lines, all accessoriesas per specifications etc. as required 6.4 mm dia (od) (soft drawn) with tube thickness 1.2 mm and 12.7 mm dia (od) (soft drawn) with tube thickness 1.2 mm for 1.5 tr hi wall split, supply and fixing of duly insulated 25mm upvc drain pipe, supplying , installation, testing and commissioning of outdoor frame / stands to withstand the full load of outdoor units and making good all the damage for 1.5 tr hi-wall split ac., dismantling of existing air conditioner
Agency / Dept :
state bank of india SBI
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
7.8L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16877656
Location : krishnagar , west bengal
Source : GEM Tenders
LIVE TENDER
tender for supply installation testing and commissioning of 1.5 tr hi-wall split systems , supply installation testing and commissioning of 2.0 tr hi- wall split systems , supply installation testing and commissioning of 2.0tr cassette type split systems , supply installation testing and commissioning of 3.0tr cassette type split systems , copper refrigerant piping for 1.5tr and 2.0tr hi-wall split ac , copper refrigerant piping for 2.0tr and 3.0tr cassette type split units , drain pipe , outdoor stand for 1.5tr and 2.0 tr hi-wall split ac , outdoor stand for 2.0tr and 3.0 tr cassette type split units , 4 inch dia pvc pipe , supply and laying of suitable flexible cable from outdoor to indoor, airconditioners for mini racpc, supplying , installation, testing and commissioning of air cooled hi wall split type air conditioners complete withindoor unit(idu), out door unit (odu), surface / concealed copper refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 mtr(idu to odu), copper power cable upto 3.5 mtr (idu to odu) i/c drain pipe r-32/r-410/ r-407 green refrigerant wireless remote control, suitable for working between 180- 260v with low & high voltage cutoff and 50 hz ,1 phase ac supply capable of performing cooling, dehumidification, air circulation of following capacity with scroll / rotarycompressor. the system shall be able to deliver 100% of the rated capacity upto 42 degree c. min 5 year original equipment manufacturer (oem) warranty both compressor and printed circuit board (pcb). must comply electrical cable is 694 or is 9968 temperature sensing control is/international electrotechnical commission (iec) 60730,hermetic compressor is 10617, heat exchanger is 11329, capacitor is 2993 and motor is 12615. complete as per cpwd specification and is - 1391 part ii 2023. the system shall be able to operate up to 50 degree c (out door ambient temperature). inverter type cooling with 5 star bee rating,isser value minimum value 5.6, supplying , installation, testing and commissioning of air cooled hi wall split type air conditioners complete withindoor unit(idu), out door unit (odu), surface / concealed copper refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 mtr(idu to odu), copper power cable upto 3.5 mtr (idu to odu) i/c drain pipe r-32/r-410/ r-407 green refrigerant wireless remote control, suitable for working between 180- 260v with low & high voltage cutoff and 50 hz ,1 phase ac supply capable of performing cooling, dehumidification, air circulation of following capacity with scroll / rotarycompressor. the system shall be able to deliver 100% of the rated capacity upto 42 degree c. min 5 year original equipment manufacturer (oem) warranty both compressor and printed circuit board (pcb). must comply electrical cable is 694 or is 9968 temperature sensing control is/international electrotechnical commission (iec) 60730,hermetic compressor is 10617, heat exchanger is 11329, capacitor is 2993 and motor is 12615. complete as per cpwd specification and is - 1391 part ii 2023. the system shall be able to operate up to 50 degree c (out door ambient temperature). inverter type cooling with 5 star bee rating, isser value minimum value 5.6 ., supplying, installation, testing and commissioning of air cooled cassette type air conditioners complete with indoor unit(idu), out door unit (odu), r-32/r410a/r-407 green refrigerant, wireless remote, inbuilt drain pump, suitable for 400/230v, 50 hz ,1 /3 phase ac supply, including surface / concealed copper refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 5.5 mtr (idu to odu), copper power and control cable upto 5.5 mtr (idu to odu) including drain pipe, the system shall be capable of performing cooling,dehumidification, air circulation, filteration & ventilation of following capacity with scroll/rotary compressor with min 5 year original equipment manufacturer (oem) warranty both compressor and printed circuit board (pcb) as specified. the system shall be able to deliver 100% of the rated capacity as per relevant is code. the lab testing reports as per is -1391 shall be submitted from national accreditation board for testing and calibration laboratories (nabl) accredited as per international electrotechnical commission (iec) 17025 standards/central power research institute (cpri)/ electrical research and development association (erda)with original equipment manufacturer (oem) etc. complete as per cpwd specification and as per is 1391 as required. inverter type cooling with 5 star bee rating , isser value minimum value 5.6 ., supplying, installation, testing and commissioning of air cooled cassette type air conditioners complete with indoor unit(idu), out door unit (odu), r-32/r410a/r-407 green refrigerant, wireless remote, inbuilt drain pump, suitable for 400/230v, 50 hz ,1 /3 phase ac supply, including surface / concealed copper refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 5.5 mtr (idu to odu), copper power and control cable upto 5.5 mtr (idu to odu) including drain pipe, the system shall be capable of performing cooling,dehumidification, air circulation, filteration & ventilation of following capacity with scroll/rotary compressor with min 5 year original equipment manufacturer (oem) warranty both compressor and printed circuit board (pcb) as specified. the system shall be able to deliver 100% of the rated capacity as per relevant is code. the lab testing reports as per is 1391 shall be submitted from national accreditation board for testing and calibration laboratories (nabl) accredited as per international electrotechnical commission (iec) 17025 standards/central power research institute (cpri)/ electrical research and development association (erda)with original equipment manufacturer (oem) etc. complete as per cpwd specification and as per is 1391 as required.inverter type cooling with 5 star bee rating, isser value minimum value 5.6 ., supplying, installation, testing and commissioning including vaccumiazation and nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for above system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with xple class-o tubular insulation/with class-o closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for suction and liquid lines, all accessoriesas per specifications etc. as required 6.4 mm dia (od) (soft drawn) with tube thickness 1.2 mm and 12.7 mm dia (od) (soft drawn) with tube thickness 1.2 mm for 1.5 tr hi - wall split, supplying, installation, testing and commissioning including vaccumiazation and nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for above system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with xple class-o tubular insulation/with class-o closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for suction and liquid lines, all accessoriesas per specifications etc. as required 9.5 mm dia (od) (soft drawn) with tube thickness 1.2 mm for 2.0 and 15.86 mm dia (od) (soft drawn) with tube thickness 1.2 mm for 2.0 tr cassette type split units, supply and fixing of duly insulated 25mm upvc drain pipe, supplying , installation, testing and commissioning of outdoor frame / stands to withstand the full load of outdoor units and making good all the damage for 1.5 tr hi-wall split ac., supplying , installation, testing and commissioning of outdoor frame / stands to withstand the full load of outdoor units and making good all the damage for 2.0 tr cassette type split units., supply ,installation of minimum 4 inch dia heavy duty pvc pipe with all hanging supports required at regular intervals for laying copper and drain piping in banking, supply and fixing of four core cable
Agency / Dept :
state bank of india SBI
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16813008
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
LIVE TENDER
tender for almirah large with shelves steel , book case small , charpoy ip with hard top , locker bed side steel , rack adjustable 6 tier steel , table dressing gents with mirror , table dressing ladies with mirror , table dining 4 person , table writing med , teapoy wooden , hat stand with mirror , sofa set 5 seater , chair computer , rack shoe steel , table bed side , bin solied linen multi purpose, special repair surveyed off condemned furniture for the qe jun 2025 under ge minniebay, dimension overall size shall be 1985mm high comma 920mm wide and 485mm deep. description the base shall be made of two numbers mild steel sheet channel bases made in u shaped with ends covered. mild steel sheet shall be 1mm thick. the base channel shall be welded at 50mm from each end of the length of 920mm and shall be up to full width of 485mm and shall be 100mm high top comma sides bottom and back of almirah shall be of 1mm thick mild steel sheet. four shelves equally spaced of 1mm thick mild steel sheet shall be provided to make five compartments. front shutter shall two leaves of equal size. front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung. all joints and welding and fixing shall be done in accordance with the standard workmanship. handle one chromium plated steel handle with a locking device shall be provided as shown on drawing. locking device the locking device shall be three way locking device and shall also be provided with decorative key plate. finish all steel surfaces shall be painted with two coats of smoke grey paint internally and extrenally with spray machine over a coat of red oxide primer after preparation of surfaces. a mark of mes shall also be provided on top left corner of front shutter with visible colour. painting shall be done with spray machine. rest all as per drg., overall size shall be 1025mm long comma 450mm wide and 750mm high. back shall be 1025 mm long and 750 mm high made out of prelaminated hdf board bd 18mm thick one side teak comma walnut and other side balancing white comma rest all as per drg and as directed by engr in charge., overall size shall be 1980mm long comma 900mm wide and 440mm high. two long rails and two short rails shall be of 25mmx65mmx16 gauge ms rectangular pipe. the legs shall be of size 32mmx32mmx16 gauge welded to long and short rails as shown on drg.two stiffeners of size 25mmx25mmx16 gauge shall be provided in equidistant between two opposite long rails. six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. two stiffeners joining legs of size 25mmx25mmx16 gauge shall be provided at 150mm from ground level. 12mm thick bwr plywood shall be provided for top as shown on drg with proper nut and bolt .one nut and bolt shall also be provided at centre of each stiffeners for fixing the plywood irrespective of what is shown on drg. pvc hard rubber shoes shall be fixed at bottom of each leg. all steel surfaces shall be painted with synthetic enamel paint black in color after applying a coat of primer. rest all as per drg, dimension overall size shall be 760mm long comma 600mm wide and 1100mm high. description the locker shall be made of mild steel sheet 1mm thick. 20 mm dia conduit pipe shall be chrome plated with wall thickness of 1 point 6 mm shall be fixed with side sockets. two handles chromium plated 100mm long shall be fixed to shutters with necessary riveting. one hasp and staple 75mm long shall also be fixed to shutters with riveting. the left shutters shall be provided with 100mm long tower bolt inside at upper and lower ends also. the locker shall be provided with compartments as shown in drgs made of 1mm ms sheet. finish all steel surface internally and externally comma exposed to view when placed in position shall be given two coats of smoke grey paint internally and externally after properly smoothened the surface with sand paper and applying putty. painting shall be done with spray machine. rest all specifications are as per drg., dimension overall size shall be 915mm long comma 610mm wide and 1905mm high. description the entire rack shall be made of 1mm mild steel sheet. the sides shall be provided with 40x40x4mm angle iron welded to 1 point 00mm thick ms sheet. 75x75x3mm thick flat iron cut to shape shall be welded at front corner. all partitions shall also be made of 1mm thick mild steel sheet and shall be riveted to side of rack. all dimensions comma shape and size shall be followed as per drg. all joints comma fixing shallbe done in accordance with standard specifications. rest all as shown on drg. finish all steel surfaces exposed to view when placed in position shall be painted with two coats of smoke grey hammer paint internally and extrenally with spray machine after preparation of surfaces. painting shall be done with spray machine. rest all as per drg., all as per drg comma the frame shall be strictly as per drg wallet oblique teak colour as approved. the mirror shall be of 5mm thickness of make modiguard oblique saint gobain all shown on drg and as directed by engr in charge., the overall size of the table dressing shall be 1150mm long 380mm wide and 1700mm high. the sides comma top comma back and front of the base unit shall be of 18mm thick prelaminated mdf board. the bottom of the side units shall be of 12mm thick mdf board. the sides and back of drawers shall be of 12mm thick prelaminated mdf comma bottom of the drawers shall be of 6mm thick commercial ply whereas the front of the drawers shall be of 18mm thick prelaminated mdf board. 5mm thick electro copper plated mirror shall be fixed over 6mm thick plywood back. track rails 25mm x 25mm in section on one side telescopic channel of make hettick oblique ebbco comma on two vertical. the overall size of the stool shall be 440mm long 350mm wide and 425mm high. the four sides shall be of 18mm thick prelaminated mdf. the top of the stool shall be of 12mm thick plywood openable as shown in drg. four heavy duty revolving nylon double wheels shall be provided at base below the 6mm base ply fixed over wooden runner 20 mm x 20 mm. the seat of the stool shall be 75mm high comma made of foam 40 density covered with tapestry cloth as approved by engr in charge oblique ge. rest all as per drg., all as per drg comma the wood shall be 1st class hard wood teak free from any joints cracks and knots. the top shall be made out of 18mm thick mdf board exterior grade one side teak lamination in wange oblique wallet as approved colour and one side white lamination. all exposed edges of ppb shall be provided wooden beading of teak wood 4mm thick x 18mm wide duly polished with matching colour the frame shall be polished after prepration of surfaces with two or more coats of brown oblique walnut colour melamyne polish with spray machine as per the requirement to its glossy look. rest all as shown on drg and as directed by engr in charge., dimension overall size shall be 1145mm long comma 600mm wide and 760mm high. description all wood shall be of first class hard teak wood except top and right hand side drawer cabinet. legs shall be of 35mmx55mm in section and 717mm high having 5mmx5mm in section groove at the top of legs at the portion when placed in position. the top shall be of 18mm thick of approved shade and the edges shall be covered with 4mm thick teak wood beading. two short stiffeners of teak wood of size 50mmx40mm in section irrespective of what is shown on drg shall be provided between legs at 100mm from bottom of legs. sides of the box which house the drawer and cabinet shall be 18mm thick bwr grade plywood sides and back of drawers shall be of 12mm thick teak wood planks. bottom of drawers shall be of 6 mm thick plywood commercial. 6mm thick plywood commercial 75mm high partition shall be provided in the drawer. shutter for cabinet shall be fixed with piano type continuous hinges. lock shall be provided to drawer and shutters. recessed handle shall be provided to drawer and shutter. 25mm dia and 25mm high rubber shoes shall be fixed to bottom of legs. finish all wood surfaces shall be melamyne polished with high gloss finishby spray machine. rest all as per drg., dimension the overall size shall be 600mm long comma 450mm wide and 540mm high. description the legs shall be 60mmx30mm in section and 497 mm high and shall be of teak wood. 5mmx5mm in section groove shall be provided at the visible portion of top of legs. top rails of teak wood of 20mmx50mm in section and 510mm long shall be provided between the legs. bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. a centre rail of size 20mmx50mm shall also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg. 25mm thick and 25mm dia hard rubber oblique pvc rings shall be fixed to the bottom of all legs fixed with 30mm long screws. top of table shall be of 18 mm thick pre laminated mdf board with 4mm teak wood edging alround the top of table. finish all wood surfaces shall be melamyne polished with high gloss finish by spray machine. rest all as per drg, overall size shall be 1330 mm long comm 710mm high. the inner frame shall be of 50mmx20mm teak wood battens six in nos. the back and front of frame shall be covered with 6mm thick commercial ply. the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive. six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg. 5mm thick looking mirror of saint gobian comma modiguard oblique atul shall be provided as shown on drg with beading alround. mild steel key plate shall be provided at both top corners of the hat stand. all exposed surfaces shall be given high gloss melamyne polish with lacquer spray machine finish. rest all as per drgs, all as per drg comma the timber in all around shall be first class hard wood teak comma the cushions shall be made out of pu foam of min 40 density of approved make and covered with tapestery cloth of approved quality comma pattern and colour before incorporating in work. the frame shall be polished after prepration of surfaces with two or more coats of brown oblique walnut colour melamyne polish with spray machine as per the requirement to its glossy look rest all as shown on drg and as directed by engr in charge., the base pedestal assembly of chair computer shall be of dia 700mm and 1060mm high. the pedestal assembly shall be provided with injection molded in black 30 percentage glass filled nylon. a 10 point 5mm dia forged bright zinc plated ms castor pin is of press fitted into each prong for holding the castors. the seat and back of the chair computer shall be made of 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. the back form shall be designed with contour lumber support for extra comfort with pvc lipping allround. the back rest shall be adjustable and consist of drop lift mechanism and shall be adjusted in the insert. it shall be scratch and weather resistant. rest all as per sample and as approved by ge, overall size shall be 700mm long comma 300mm wide and 880mm high. the legs of the shoe rack shall be of 25mm dia ms pipe of 18 gauge. the five shelves of the rack shall be of 20mm dia ms pipe of 18 gauge welded to legs. the shelves shall have 3mm dia ms rod 9 nos in widthwise and 3 nos in lengthwise welded to 20mm dia shelf frame. pre treated with powder coated oven baked with black colour., the overall size of the table bed side shall be 450mm x 450mm x 600mm from rear and 450mm x 450mm x 500mm from front as shown in drg. the entire frame of table bed side shall be made up of 18mm ms square pipe 18 gauge duly black powder coated. the two sides and top shall be made up of 18mm thick mdf board exterior grade. the back of the table except the top portion as shown in drg shall be provided with 6mm commercial plywood bwr grade duly screwed to frame. the two sides comma back and bottom of drawers of the table shall be made up of 12mm thick mdf board irrespective of what is shown on drg comma except the front side which shall be of 18mm thick mdf board exterior grade. the drawers shall be made functional by using telescopic channel of appropriate size shall be used for smaooth mvement of drawer.the drawers of the tables shall be provided with 100mm long cp handles. rest all as per drg. the lower portion of the bed side table should be box type provided with one shutter of appropriate size duly fixed with piano type hinges comma one cp handle of 4 inch size and one magnetic catcher should also be provided. rest all as shown on drawing and as directed by engr in charge., overall size shall be of 1000mm long comma 380mm wide and 760mm high. bottom rest shall be made of 19mm thick mdf board and shall be 900mm long and 280mm wide and 75mm hih joined together in long and short sides. multipurpose bin linen shall be placed over it. the bin shall be 1000mm long comma 380mm wide and 385mm high. back side shall be of 19mm thick mdf board 1000mm long and 685mm high. sides shall be of 19mm thick mdf board 380mm wide and 685mm high. top and bottom shall be of 19mm thick mdf board 1000mm long and 380mm wide. a vertical partition shall be provided at 400mm from inner face of left hand side which shall be of 19mm thick mdf. a shelf shall be provided in the middle of left portion which shall be of 19mm thick mdf board and shall remain uncovered. two drawers and a cupboard shall be provided on the right hand side. of the bin. bottom comma sides comma back and front of drawers shall be of 12mm thick mdf board. the partition between the drawers shall be of 19mm thick mdf board. front shutter of cupboard shall be hinged with continuous piano type hing and shall be side hung. the shutter shall have eight vertical slots of 19mm width and 180mm high with gap of 19mm made in the center of the shutter. the shutter shall be provided with 100mm long mild steel powder coated handle and ball spring catch as shown on drawing. 19mm thick mdf board 543 mm long and 40mm wide shall be provided as base support in the front under the drawers. teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers. teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers on the outer sides in such a way that it rns smoothly over the beares fixed on the the sides of the partitions of the bin.
Agency / Dept :
indian army
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
23.73L
View Documents
T18 Ref No : 16816890
Location : dahod , gujarat
LIVE TENDER
tender for maintainance rubber kit for n, maintainance rubber kit for n-1 reducing valve, consising 5 items, conforming to irs-r48-88, as below: special repair no.de sc wabco pt.no. qty 1. o ring 531668 2 nos 2. o ring 564056 1 no 3.diaphragm 526346 1 no 4. gasket 558515 2 nos 5. dirt coll ector 564855 1 no spec: sk- 523-101. ftrtipl part no 790523101. - warranty period: 30 months after the date of delivery
Agency / Dept :
western railway WR
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16938000
Location : bikaner , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for capi pro mix jacket , capi pro mix trouser , rifle stand with bag , premium rifle shoes , pro shooting mat , kneeling roll with anti slip rubber without filler , cork filler for kneeling roll , capi flex shooting inner upper std , capi flex shooting inner lower std , premium shooting belt , ear plug, rifle shooting kit and accessories, the capi pro mix jacket is made of a unique blend of issf approved capitex material and pro canvas material. this economical design is an ideal choice for those beginners who want the advantages of capitex materials., he capi pro mix trouser is made of a unique blend of issf approved capitex material and pro canvas material. this economical design is an ideal choice for those beginners who want the advantages of capitex materials., the rifle stand is made of aircraft-grade aluminum which automatically makes it lightweight, durable, and sturdy. a wel-researched and engineered method is used for the design. we have stressed maintaining the balance and weight bearing capacity of the stand. its compact structure makes it easily portable. these stands come with a pellet box holder attachment and can extend to any desirable hight., premium rifle shoes- sole is consolidated with three layers. 2. rigid layer for batter support. 3. soft middle layer for maximum comfort. 4. anti-slip layer with hollow area for a firm grip. 5. two padded soft tongues designed to enhance comfort in front and back. 6. removable adjustable velcro strap for better fit and style., it should be made of 100% nylon waterproof material. black-colour rectangle-shaped anti-slip rubber is placed below the elbow positioning area. inside the shooting mat, high-density polyethylene padding is used for comfortable positioning. it is specially designed to fold into a portable size and has attached handles to easily carry anywhere. used only in the prone position., it should be made of canvas material and is filled with cork granules for is filled with cork granules for comfortable positioning. the canvas kneeling roll is placed under the top of the ankle above the foot, which gives great support and avoids imbalanced movements. anti-slip rubber padding further reduces any accidental slips and increases friction., cork filler for kneeling roll, 1. shooting upper has extra an layer of fabric at the elbow and shoulder for comfort in all shooting positions. 2. the upper designed like a pullover with a full-length ykk zipper for easy wear. 3. shooting upper is a blend of capiflex and lycra. 4. sweat free fabric is inherently very thin and wrinkle free hance, it is used on the inner elbow to enhance comfort in all shooting positions., shooting lowers are designed for maximum comfort and have drawstrings and elasticized waistbands., premium shooting belt, ear plug
Agency / Dept :
indian army
Due Date :
Sep 03, 2026 (3 days left)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Rubber Below. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Rubber Below sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Rubber Below Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Rubber Below, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Rubber Below Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Rubber Below Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Rubber Below.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Rubber Below depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Rubber Below Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Rubber Below bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Rubber Below. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Rubber Below, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Rubber Below, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Rubber Below?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Rubber Below tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Rubber Below?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Rubber Below, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Rubber Below is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All