Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

134Latest Power on long term Tenders List

Latest Power on long term Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Power on long term tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Power on long term tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Power on long term Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Power on long term tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Power on long term Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Power on long term Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Power on long term Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Power on long term tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Power on long term Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Power on long term sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Power on long term tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Power on long term tenders.

Is EMD mandatory for all Power on long term tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Power on long term work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Power on long term tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Power on long term Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17785769
Location : cuttack , odisha
NEW TENDER
tender for requirement for premises on lease and rental basis - offers in sealed covers on prescribed format are invited from the interested parties, who are ready to lease out on long term preferably for 15 years or more their readily available premises in orti area at the orti po baghuni district cuttack branch location in having required carpet area 800-1000 sqft applicant will be required: (i) to provide proof of ownership along with application and (ii) noc for opening of bank/atm from competent authority at their own cost at the time of finalization. • the offer must have a clear title of the property. • premises should preferably be located on ground floor. • the premises must be suitable from the security point of view and have all basic amenities such as adequate sanitary arrangements, water and electricity, natural light and ventilation. • the premises structure should be strong enough to bear the weight of strong room, strong room doors, and safe & lockers cabinet. construction for strong room as per bank’s specification should be done by the landlord. • the offeror will have to execute bank’s standard lease deed and bear the cost of execution and registration of lease deed. • the offeror should bear all the taxes, non-conforming/misuse charges, cesses etc., if imposed, related to the premises. • the offeror is to provide space for generator set and parking space free of cost. • the offeror is to provide three-phase power connection with minimum power load required for bank

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 17725939
Location : jaipur , rajasthan
LIVE TENDER
tender for hiring of office premises on long-term lease basis at jaipur in required built-up area approximately 50,000–55,000 sq. ft a. executive accommodation • 02 director/md rooms with attached washrooms, secretariat area and visitor lounge • 02 ceo/executive director rooms • 07–08 general manager rooms • 23–25 agm/department head cabins b. employee work areas • dedicated workstation areas accommodating approximately 170–200 executives and staff, suitably partitioned based on functional requirements. • open office seating arrangements • modular workstations • ergonomic office layout c. meeting & conference facilities • 01 board/md conference room (25–30 seating) • 01 large conference hall (70–80 seating) • 02 conference rooms (20–25 seating) • 03 meeting/auditor rooms (8–10 seating) d. training & multipurpose facilities • 01 learning & development centre • 01 training hall • 01 multipurpose hall accommodating approximately 150 employees e. administrative facilities • reception and visitor waiting area • record rooms • store rooms • server/data centre room • first aid/medical room • recreation room f. pantry & cafeteria • pantry facilities on each floor (preferred) • central pantry • cafeteria/dining area for approx. 60-70 persons • utility areas, 5. building amenities the building should provide the following minimum amenities: electrical & power • dedicated electrical load adequate for office operations • 100% dg power backup • ups room provisions • energy-efficient electrical systems • led lighting systems air conditioning • central hvac system or equivalent • adequate cooling for office occupancy • separate ac provision for server room it & communication infrastructure • structured lan cabling • multiple isp connectivity provisions • ofc connectivity • server room readiness • access control systems fire & safety systems • fire detection and alarm system • fire hydrant system • sprinkler system • fire noc as applicable • emergency exits • emergency lighting • compliance with national building code and local regulations security infrastructure • 24×7 security arrangements • cctv surveillance • access control system • visitor management system (preferably) vertical transportation • adequate passenger lifts • service lift (preferred) • barrier-free access water & sanitation • continuous water supply • separate washrooms for men and women • washroom capacity suitable for 200–250 employees • drinking water facilities sustainability features (preferred) • igbc/griha/leed certified buildings • rainwater harvesting • energy-efficient systems • solar rooftop installations • waste management facilities 6. parking requirement the premises should provide: • 130-140 car parking spaces • adequate two-wheeler parking • dedicated visitor parking • parking for official vehicles
T18 Ref No : 17099254
Location : jalpaiguri , west bengal
Source : GEM Tenders
tender for loudspeaker 60 watt surfacemounted two way passive loudspeaker , loudspeaker 150 watt surface mount loudspeaker featuring , subwoofer a portable powered bass module featuring a slim 7 inch x 13 inch high excursion racetrack driver , amplifier two channel 525w ohms 4 ohms power amplifier , a 7.2 channel 8k av receiver it delivers 80 watts per channel and supports immersive 3d audio formats like dolby atmos and dts , 24u rack , interconnectors with installation, dolby atmos sound system, single loudspeaker performance frequency response minus 3 db to 73 to 17000 hz frequency range minus 10 db to 65 to 20000 hz nominal coverage angle 1 to 4 kh to 135 deg conical nominal coverage 1 10 khz to 130 deg conical aes transducer test bose professional extended lifecycle test power handling long term continuous 60 w to 50 w power handling peak 240 w to 200 w sensitivity spl 1 w 1 m sq 89 db 89 db calculated maximum spl 1 m qbc 107 db 106 db calculated maximum spl 1 m peak 113 db 112 db crossover 1.8 khz passive 2 way crossover loudspeaker eq not required bose professional eq voicing and smartbass available recommended high pass protection 65 hz with minimum 24 db octave filter transformer taps 70v 3 6 12 25 50 w bypass 100v 6 12 25 50 w bypass transducers low frequency 1 x 133 mm woofer 5.25 inch weather treated high frequency 1 x 25 mm 1 inch neodymium dome tweeter coaxially mounted weather treated technology dispersion alignment system 165 mm 6.5 in system diameter nominal impedance 8 ohms transformer bypass, single loudspeaker performance frequency response minus 3 db 60 20000 hz frequency range minus 10 db 52 20000 hz nominal coverage angle 1 4 khz 130 deg conical nominal coverage angle 1 to 10 khz 115 deg conical audio performanceaes transducer test bose professional extended lifecycle test power handling long term continuous150 w125 w power handling peak 600 w500 w sensitivity spl 1w 1msq 93 db 93 db calculated maximum spl 1 m continuous qbc 115 db 114 db calculated maximum spl 1 m peak 121 db 120 db crossover 1.5 khz passive 2 way crossover loudspeaker eqnot required bose professional voicing smartbass processing available recommended high pass protection 48 hz with recommended 24 db octave filter overload protectionresistor network power reduction with automatic reset transformer taps 70 v 2.5 w 5 w 10 w 20 w 40 w 80 w bypass 100v 5 w 10 w 20 w 40 w 80 w bypass transducers low frequency 1 x 8 in 203 mm woofer weather treated high frequency 1 x 1 in 25 mm compression driver coaxial center firing weather treated nominal impedance 8 ohms transformer bypass, system type self powered bass module frequency response minus 3 db minus 40 hz to 180 hz frequency range minus 10 db minus 32 hz to 250 hz nominal vertical coverage pattern 0 deg nominal horizontal coverage pattern omnidirectional with minus 10 db rear rejection in cardioid mode calculated maximum spl 1 m continuous sq 118.6 db calculated maximum spl 1 m peak sq 124.6 db crossover 200 hz low frequency 1 x racetrack low frequency driver 7 inch x 13 inch low frequency voice coil size 2 inch driver protection dynamic limiting, sensitivity 1.4vrms frequency response plus 0db minus 1db signal to noise greater than 103db at .775vrms 6db lower intermodulation distortion less than 0.3 percent damping factor greater than 200 thd less than 0.5 percent crosstalk at 1khz greater than 85db at 20khz greater than 55db dimensions 19 inch 48.3 cm x 3.5 inch 8.9 cm x 7.7 inch 19.6 cm weight 8.6 lbs 3.9 kgs, number of power amps 7 power output 8 ohm 20 hz to 20 khz 0.08 percent 2ch drive 80 watts per channel power output 6 ohm 1 khz 0.7percent 2ch drive 120 watts per channel power output 6 ohm 1 khz 10 perc greater than 1 percent 1ch drive 145 watts per channel system remote control rc 1257 power consumption 430w greater than 440w power consumption no sound eco on off 29w 39w standby consumption in w 0.1 cec standby consumption in w 0.5 maximum dimensions wxdxh antenna horizontal mm antenna vertical mm 434 x 151 x 339 434 x 215 x 339 carton dimensions packaging wxdxh 523 x 435 x 232mm weight in kg 8.6 kg, physical and build specifications dimensions standard base footprints like 600 mm width by 600 mm or 800 mm depth with a total height around 1136 mm material quality built with high grade crca or spcc steel sheets 1.2 mm body thickness and thicker 1.6 mm to 2.0 mm mounting angles with clear u markings load capacity supports high static loads typically up to 500 kg for heavy servers switches and ups systems, electrical specifications 75 ohm impedance matches digital s pdif audio standards to stop signal reflection and timing errors jitter low capacitance eg 22 to 53 pf m limits high frequency roll off and preserves the exact shape of the audio wave over distance conductor gauge 24 to 26 awg offers a balanced thickness for flexibility and solid signal flow in line level or digital connections

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Power On Long Term. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Power On Long Term sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Power On Long Term Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Power On Long Term, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Power On Long Term Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Power On Long Term Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Power On Long Term.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Power On Long Term depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Power On Long Term Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Power On Long Term bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Power On Long Term. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Power On Long Term, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Power On Long Term, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Power On Long Term?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Power On Long Term tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Power On Long Term?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Power On Long Term, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Power On Long Term is declared L1 and is generally awarded the contract