sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

19Latest Polythene screw Tenders List

Latest Polythene screw Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Polythene screw tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Polythene screw tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Polythene screw Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Polythene screw tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Polythene screw Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Polythene screw Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Polythene screw Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Polythene screw tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Polythene screw Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Polythene screw sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Polythene screw tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Polythene screw tenders.

Is EMD mandatory for all Polythene screw tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Polythene screw work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Polythene screw tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Polythene screw Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16953187
Location : hoshangabad , madhya pradesh
Source : GEM Tenders
LIVE TENDER
corrigendum tender for reel arm w86rufc1p71 b3 i 192 for sheeter , oscillation delivery a202uh35p90 b3 i 7.3 , counting delivery a202uh35p80 b5 i 35.4 , polythene wrap vf44 a14p63 b14 b3 0.18 kw , unwinding arm w86 rufc1 p71 b5 b3 i 240 , rewinder slitter a202 urp71 b3 i 79.9 , lay bay a603 uh60 p112 vb 4 kw 1435 rpm , reel spool injector w63 ufc1p71 b5 i 80 , briquetting screw feeder alm110 , briquetting machine agitator amf060s , shredo conveyor f77 dibe100s4 2.25 kw , sew tipo ka37 dre80m4 0.75kw imm2a, spare gearbox for motor for sheeter, as per technical specification
Agency / Dept :
security printing and minting corporation of india ltd SPMCIL
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16954573
Location : bashohli , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for hss drill bit set 1 to 12mm , hss drill bit 15 mm , drill bit 16mm hss , hss drill bit 18 mm , drill bit 20mm , hss drill bit 22mm , drill bit 28mm hss , hss taper shank twist drill bit 30mm , hss drill bit 32 mm , hss drill bit with carbide tip straight shank 8 mm dia , hss drill bit with carbide tip straight shank 10 mm dia , hss drill bit with carbide tip straight shank 12 mm dia , carbide drill bit 14mm , drill bit 16 mm with taper shank , gas cutting torch cuttozen5 , cutting nozzle 3 by 64 , gas hose 8 mm dia oxygen and acetylene , gas hose da , flashback arrestor for oxygen gas regulator mounted , flashback arrestor for acetylene gas regulator mounted , cutting nozzle 1 by 16 , tap set with handle 6 to 24mm , centre punch , welding lead copper core 600 amp , welding hand screen or shield lens size 3 point 25 inch x 4 piont 25 inch , angle grinder ag5 1000w , grinding wheel 180 mm , grinding wheel 5 inch , cutting wheel 180 mm , cutting wheel 125mm , flexible shaft grinder , burr cutter set of 5 nos , chipping hammer , safety helmet , hammer 3 kg , hammer 5 kg , hammer 1 point 5 kg , welding electrode e 7018 low hydrogen size 4 mm , welding electrode e 7018 size 3 point 15x350 mm packet 90 nos , welding electrode size 3 point 15mm x 350mm e6013 ador make 2 point 5kg or pkt , welding electrode e308 3 point15 x 350 , welding electrodes e309 mo16 3point15 mm , engine oil sae30 , vertical staff gauges , paint marker pen , mouse pad , spray wd40 , rubber solution 200ml , ms angle 40 x 40 x 5 , mild steel square pipe 40x40 mm 4 mm thick , d spanner set 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x27 25x28 30x32 , ring spanner set size 6x7mm 8x9mm 10x11mm 12x13mm 14x15mm 16x17mm 18x19mm 20x22mm 24x27mm 30x32mm , double ended spanner 32 to 55 mm , double ended ring spanners 32x36 36x41 41x46 46x50 55x60mm , combination plier 6 , combination plier 8 , chop saw 14 inch , cotton waste white fibre squirrel , cotton waste , markin cloth , m6 grease nipple , m8 grease nipple , m10 grease nipple , grease nipple 180 , grease line nipple 16x13mm , loctite adhesive , pollution mask , cotton hand gloves , double ply polyester webbing slings load capacity 5 tonne , heavy duty endless polyster sling capacity 5 ton x 2mtrs long effective length , polyster sling 5 t cap 3m length , polyster webbing slings 5 ton 5 mtr length , polyster sling 5 ton capacity with eyes on both ends length 8mtr , polyester webbing sling 10 ton 05 meter length , polyster sling with anti abrasive sleeve capacity 10t length 8 mtr , polyster sling length 10 mtr capacity 10 ton , trolley , screw driver 8 inch , screw driver heavy duty 10 inch , screw driver heavy duty 12 inch , screw driver 14 inch , o ring kit , gardening nylon pipe bore dia zero point 5 inch 50 meter lenth , nylone rope 12mm in meter , adjustable spanner length 8 , adjustable spanner 12 , heavy duty pipe wrench 12 inch , polythene masking film roll , umbrella , safety shoes size 8 , hydraulic hose pipe 07200 to 63216 , painting brush 3 , paint brush 4 inch , painting brush 5 , flat, hydro mechanical maintenance tools and consumables, as per technical specification
Agency / Dept :
national hydroelectric power corporation limited nhpc limited
Due Date :
Sep 14, 2026 (14 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16976665
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
LIVE TENDER
tender for jerry can 20 ltrs , tube flourescent led cfl , corrosion inhibitor , biodegradable polythene film length 112 inch width 18 inch thk 0.007 inch , door mat foot mat mat floor , can plastic 10 ltr capacity , varnish , aqua bond putty , wet surface putty , lamp cfl led, procurement of naval store items, jerry can 20 litre capacity hdpe high density polyethylene leak-proof screw cap with carrying handle suitable for storage and transportation of water and fuels as applicable., led tube light 20w or equivalent to 4 ft fluorescent tube 230v ac cool daylight 6500k minimum 1800 lumens bis certified., corrosion inhibitor liquid water-soluble metal protective chemical for ferrous and non-ferrous surfaces suitable for industrial and marine applications supplied in sealed container., biodegradable poly film roll length 112 inches width 18 inches thickness 0.007 inch transparent biodegradable grade for protective wrapping., floor mat heavy-duty pvc or rubber anti-skid washable rectangular suitable for indoor and outdoor entrance use., plastic can 10 litre capacity virgin hdpe screw cap leak-proof with carrying handle., clear synthetic varnish for wood and metal surfaces transparent gloss finish moisture and abrasion resistant suitable for interior and exterior use., epoxy putty aqua bond type two-component adhesive putty waterproof suitable for underwater and wet repairs on metal wood and concrete surfaces., epoxy wet surface repair putty two-component moisture-curing applicable on damp and wet surfaces suitable for marine maintenance., led lamp or bulb 9w to 12w b22 or e27 holder as required 230v ac cool daylight 6500k bis certified.
Agency / Dept :
indian coast guard ICG
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16586378
Location : hukeri , karnataka
Source : GEM Tenders
corrigendum tender for 1110622011 box strapping roll brown , 1310711352 bag polythene ldpe l 140xw 105 cms , bolt , washer , screw, 1110800127, box strapping roll brown, bag polythene ldpe l 140xw 105 cms, demo not to be quote
Agency / Dept :
hll lifecare limited HLL
Due Date :
Aug 07, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16425039
Location : hukeri , karnataka
Source : GEM Tenders
tender for 1110622011 box strapping roll brown , 1310711352 bag polythene ldpe l 140xw 105 cms , bolt , washer , screw, 1110800127, box strapping roll brown, bag polythene ldpe l 140xw 105 cms, demo not to be quote
Agency / Dept :
hll lifecare limited HLL
Due Date :
Aug 04, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15675857
Location : rangareddy , telangana
Source : GEM Tenders
corrigendum tender for plate rack stainless steel sinks for domestic purposes (v3) as per is 13983 (q2) , urinal bowls as per is 2556 (part 6) (q3) , m - seal as per is 9197 (q3) , wood screws (q3) , hasps and staples as per is 363 (q3) , curtain pipe, sider and mounting bracket (q4) , varnishes or shellac varnish as per is 347 (q3) , stainless steel butt hinges as per is 12817 (q3) , ss butt hinges , decorative curtain bracket , opc 43 grade , opc 53 grade , white pc , odb , screws , iwc , plate rack, plate rack, stainless steel butt hinges size 125 mm as per is-12817., stainless steel butt hinges size 150 mm as per is-12817., decorative poweder coated bracket for curtain rod of size 25mm diameter, decorative poweder coated bracket for curtain rod of size 20mm diameter, powder coated ms corner l-brackets 635mm for curtain rods of 25mm dia, cement opc, 43 grade as per is-8112, in polythene bag containing weight 50 kg bag,, cement opc, 53 grade as per is-12269-2013, in polythene bag containing weight 50 kg bag,, white portland cement as per is-8042, in polythene 01 kg packet, oil bound distemper colour white as per is-428, stainless steel screw wood 45mmx8g as per is-1812 in a packet of 100 nos. (approx 1.74kg), stainless steel wood screw 65mmx5g as per is-1812 in a packet of 100 nos. (approx 1.90kg), stainless steel philips head wooden screw size 15 mm. (approx 0.34kg), stainless steel philips head wooden screw size 20 mm. (approx 0.45kg), stainless steel philips head wooden screw size 25 mm. (approx 0.54kg), stainless steel philips head wooden screw size 35 mm. (approx 0.71kg), stainless steel philips screw 40 mm pkt of 100 nos., stainless steel philips head wooden screw size 50 mm. (approx 0.97kg), stainless steel philips 65mmx5g as per is-1812 in a packet of 100 nos. (approx 1.90kg), water closet orissa pattern type, size 580x440cm, white colour is-2556-part-03, stainless steel plate rack of size 24 inchesx24 inchesx10 inches ss gr-304, stainless steel plate rack of size 24 inchesx24 inchesx10 inches ss gr-304, ss plate rack s s size 24 inchesx36 inchesx10 inches ss gr-304, ss plate rack size 31 inchesx36 inchesx10 inches ss gr-304
Agency / Dept :
indian army
Due Date :
Jun 13, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15702798
Location : budgam , jammu & kashmir
Source : GEM Tenders
tender for procurement of combined bathroom toilet main column of rhs 122x1x3.6 mm 9.67 kgs per rm 3m length , truss , side runner made of shs 45x45x2.6mm thick , purlin will be fabricated out of rectangular steel hollow sections , extention purlin shall be of 450mm long fabricated out of rectangular steel hollow sections , sun shade frame with sheet. , roofing sheets , false ceiling supporting angle ms 65x65x5 mm , false ceiling supporting l section of 50 x 50 x 5mm thick , wall puff panel of size 1000 width x 3000 height, 40 mm 0.50 mm , partition wall puff panel of size 1000 width x 3000 height, 40 mm , puff panel for ceiling portion of size 1000 width x 3000 height, 40 mm , main external door size 1000x2100 mm , internal doors size 750x2100 mm , fixed upvc window 1000x450 mm , ventilators with exhaust fan 250 mm sweep , inner corner flashing 50x50x3000mm, 0.5mm thick , bird cover flashing 50x250x3000mm, 0.5mm thick , outer corner 3100mm x 200mm x 200mm , ridge cover 2400mm x 300x300mm , top and bottom u flashing 40x40x65x1.5mm thick, 3000mm long , ms foundation nut and bolt 16x450mm incl water tank staging. , ms nut and bolt with washer 12x50mm for coln and truss connection , ms nut and bolt with washer 12x100mm for connecting truss and purline , ms self taping with washer screw 10x75mm , ms self taping with washer screw 10x 25mm , ms self taping with washer screw 10x 100mm , aluminium pop rivet 25mm 1000 nos per packet , peg sets ss frame 450x60x12 mm with 6 nos ss clothing pegs 75 mm each , silicon sealant , bush green colour paint , white colour paint , brown colour paint , primer red oxide , turpentine oil , column rhs 100x100x5mm thick , side bracing isa 50x50x5mm thick , base plate size 250 x 250x12mm , top frame work of staging rhs 100x100x4mm, length 2m , top cross member for stage platform rhs 75x50x3mm, length 2.82m , top chequered plate 5mm thick for staging platform size 2m x 2m , aggregate 20mm. , aggregate 40mm. , manufacture sand m sand , pcc solid concrete blocks of size 400 mm x 200 mm x 200 mm , white cement is 8042 2015 packet 01 kg , non skid ceramic tiles as per is 15622 2017 , 25mm thick factory made chequered tiles of size 300mm x 300mm , prefabricated foundation reinforcement type f 2 , quick setting compound rapidite as per is 2185 part i 2005. , liquid water proofing compound , 10mm dia reinforcement for water staging foundation , pvc ceiling rose 2 or 3 terminal as per is 371 1999 pilot 3 plate , led tube light fitting 1 x 12 w 2 feet long complete with all accessories , cable pvc insulated, unsheathed, single core, flexible copper conductor 1100v , xlpe insulated pvc seathed heavy duty armoured multi core cable 16 sqmm 2 core , modular switch one way 6 amps one module , white cover plate with frame 2 module is 3854 2023. , white cover plate with frame 3 module is 3854 2023. , pvc flush box 2 module is 14772 2000. , pvc flush box 3 module is 14772 2000. , mcb double pole 230v ac, 50 hz, 16 amps, 10ka , mcb distribution board in sheet metal enclosure two ways with blanks , ms screw 20 mm full threaded per pkt 100 nos , tape insulation 2 cm width 10 mtr long isi marked , pvc casing caping 25 mm x 16mm is 14927 part 2. , plastic body exhaust fan, 250mm sweep size with all fittings , 3 layer ppr polypropylene random copolymer pipes sdr 7.4 uv stablised, 20 mm dia , 20mm elbow suitable for 20 mm dia ppr pipe , 20mm socket suitable for 20mm dia ppr pipes , 20mm equal tee suitable for 20mm dia ppr pipe , 20mm union suitable for 20mm ppr pipes , ppr femel threaded reducer socket 15 or 20mm , ppr femel threaded reducer elbow 15 or 20 mm , ppr end plug 20mm confirming to relevant is , ppr pipe clamps suitable for 20mm piping , cp angle cock 2 way 20mm , cp angle cock 20mm , cp stop cock 20mm , bib tap short body cp 20mm bore suitable for ppr water supply line , ppr tank connector 20mm with check nut and washer , supply of 2000 litre capacity pvc rotational moulded polyethylene water storage tank , snow white colour ewc with s or p trap concealed of size 650x405x770mm with sheet cover. , vitreous china squatting pan , pvc valve less syphonic action type low level flushing cistern 10 ltrs capacity , ceramic wash basin snow white, oval bowl type with full pedestal height 795mm , 600mm x 450mm looking mirror cabinet with pvc moulded frame. , cp over head shower without arm , cp soap dish for one soap , cp toilet paper holder , cp health faucet abs body , wash basin mixer tap hot and cold , brass chromium plated bib cock long body 15mm , teflon tape , 110 x 110mm cp nahani trap with jali , pvc swr floor traps 75mm bore and jointing to waste pipe in solvent cement with cp grating. , 75mm bore pvc swr soil, waste and vent pipe, in any length, with rubber joints , 110mm bore swr pipes single socketed in any length with rubber ring joints fixed to wall and floor , 75mm or 110mm pvc swr reducer complete , 110mm pvc swr junction single, single t equal or unequal complete , pvc swr bend any radius 110mm bore as per is 10124 part 9 or 10 of 2009 , 75mm pvc swr vent cowl complete , ppr gate valves, with iron wheel head, screwed both end , anaerobic advance septic tank. , store for anaerobic advance septic, main column of rhs 122x61x3.6 mm (9.67 kgsperrm), 3.0m length each conforming to is 4923.2017, truss the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 3.6 mm (8.00 kg per rm) with 1 by 2 slopes. all other strut members will be fabricated out of rectangular steel hollow sections of size 66mm x 33 mm x 3.2 mm (4.07 kg per rm). conforming to is 4923.2017, side runner made of shs 45x45x2.6mm thick having two pales at both ends 45x90x6mm with two holes of dia 12mm welded on either ends between column to column for fixing u chanel for pir panels, purlin will be fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm (6.40 kgperrm) with cleats welded at both the ends conforming to is 4923.2017, extention purlin shall be of 450mm long fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm (6.40 kgperrm) with cleats welded at both the ends conforming to is 4923.2017, sun shade frame with sheet- sunshades shall be made out of 0.50 mm thick camouflage pattern colour coated steel sheet conforming to is 14246-2024 (or is 277-2018 reaffirmed 2022 for base galvanized sheet) fixed with angle iron frame of isa 40 x 40 x 5 mm (3.0 kgperrm) conforming to is 808-2021., roofing sheets - 0.50 mm thick ppgi camouflage pattern (is 14246-2013) of size 3000x1060mmx0.50mm zinc coating 120 gsm (is 277-2018). self-drilling hex washer head fasteners (hot-dip zinc)., false ceiling supporting angle - ms 65x65x5 mm for placing of puf 40mm thick length - 4180mm, false ceiling supporting l-section of 50 x 50 x 5mm thick (3.80 kgperrm) fixed appropriately to the truss for placing of puf 40mm thick length - 3000mm, wall puff panel of size (1000 (w) x 3000 (ht), 40 mm 0.50 mm colour-coated gi both sides, camouflage ext per off white, tongue & groove interlocking, conforming to is 16203- 2016, partition wall puff panel of size (1000 (w) x 3000 (ht), 40 mm 0.50 mm colour-coated gi both sides, bothside off white colour (intperext), tongue & groove interlocking, conforming to is 16203- 2016, puff panel for ceiling portion of size (1000 (w) x 3000 (ht), 40 mm 0.50 mm colour-coated gi both sides, bothside off white colour (intperext), tongue & groove interlocking, conforming to is 16203- 2016, main external door - size 1000x2100 mm (01 no) 2 mm thick aluminium frame (is 1948-2024). shutter- 40 mm puf (0.50 mm ppgi both sides, . fittings- 4 nos magnetic hinges (100 mm hd), 2 al sliding bolts (300 mm), al tower bolt (200 mm), 2 d-handles, 1 helical door spring, door closer (is 208-1996), padlock + 2 spare keys. canopy 1300x450 mm with isa 35x35x3 mm frame., internal doors - size 750x2100 mm (06 nos) 2 mm thick aluminium frame (is 1948-2024). shutter- 40 mm puf (0.50 mm ppgi both sides. fittings per door- 4 magnetic hinges (100 mm hd), 1 al sliding bolt (300 mm), al tower bolt (200 mm), 2 d-type handles (150 mm)., fixed upvc window - 1000x450 mm (01 no) installed at ht 2.1 m from ffl. upvc frame & shutter thick (is 17953-2023). double glazed- 5 mm + 10 mm air + 5 mm toughened safety glass (is 2553 pt 1-2018). fixed gi wire mesh 18-20 g, (is 4948-2002). anodised aluminium grill on outer side (is 733-1983). rubberperneoprene packing for weather tightness., ventilators with exhaust fan - 250 mm sweep (06 nos) 4 nos in toilet cubicles + 2 nos in bathroom cubicles. upvc frame 2 mm thick (is 17953-2023). shutter- 4 mm frostedperpinhead dg upvc fibre glass, drop-flap type, opens internally. fittings- hinges, eye hooks, tower bolt 100 mm (is 15833-2009). fly-proofing- ss wire mesh aperture on upvc outer frame. exhaust fan 200 mm with louver pre-cut at factory., inner corner flashing 50x50x3000mm, 0.5mm thick, bird cover flashing 50x250x3000mm, 0.5mm thick, outer corner 3100mm x 200mm x 200mm, ridge cover 2400mm x 300x300mm, top & bottom u flashing 40x40x65x1.5mm thick, 3000mm long conforming to is 4923- 2017, ms foundation nut & bolt 16x450mm incl water tank staging., ms nut & bolt with washer 12x50mm for coln and truss connection, ms nut & bolt with washer 12x100mm for connecting truss and purline, ms self taping with washer screw 10x75mm, ms self taping with washer screw 10x 25mm, ms self taping with washer screw 10x 100mm, aluminium pop rivet 25mm (1000 nos per packet), peg sets - ss frame 450x60x12 mm with 6 nos ss clothing pegs (75 mm) each (is 1363per1364per1367). 1 no per cubicle (6 cubicles total)., silicon sealant - 280 ml dr fixit 501 (is 12118 pt1-1987) premium acetoxy cure, with applicator gun. for sealing roofperwall panel gaps., bush green colour paint, white colour paint, brown colour paint, primer red oxide, turpentine oil, column rhs 100x100x5mm thick conforming to is 4923.2017 length - 2.6m, side bracing isa 50x50x5mm thick conforming to is 4923.2017 length - 2.9m, base plate size - 250 x 250x12mm, top frame work of staging rhs 100x100x4mm , length - 2m, top cross member for stage platform rhs 75x50x3mm , length - 2.82m, top chequered plate 5mm thick for staging platform size - 2m x 2m, aggregate 20mm. stone aggregate to be crushed rock or gravel 20mm graded confirming to is 383- 2016 and shall consist or angular fragments and shall be clean, hard, tough, durable and of uniform quality through out., aggregate 40mm. stone aggregate to be crushed rock or gravel 40mm graded confirming to relevant is 383- 2016 and shall consist or angular fragments and shall be clean, hard, tough, durable and of uniform quality through out., manufacture sand(m-sand)-- confirming to relevant is 383-2016, crushed stone sand category. the material shall be free from clay, organic impurities and deleterious material. grading shall conforming to zone ii for rcc work and zone iiiperiv for masonry and plater works. material passing through 75 micron sieve shall not exceed 15% only crushed m- sand from approved source shall be provided . test certificate from nabl approved laboratory shall be submitted at the time of delivery., pcc solid concrete blocks of size 400 mm x 200 mm x 200 mm with a compressive strength of not less than 50 kgpercm2 (approximately 5 npermm2 or 5 mpa). these solid blocks shall be manufactured using pcc mix 1-3-6 and shall fully conform to the latest applicable indian standard is 2185 (part 1)- 2005 (reaffirmed 2020). the density of the block shall be 2400 kgperm3, white cement is 8042 - 2015 (packet 01 kg), non skid ceramic tiles as per is 15622-2017 of size 300x300mm x 10mm mm thick 1st quality as per approved sample., 25mm thick factory made chequered tiles of size 300mm x 300mm made in grey cement with pigment conforming to is 1237-2012 and is-13801-2013 respectively., prefabricated foundation reinforcement type f-2 made of 12 mm & 10 mm for steel as main bars and 8 mm dia deformed bars as in stirrups as per drg including notes, cutting bending & binding with mild steel binding wire annealed not less then 0.90 mm dia complete all as per drg conforming to is 1786 - 2008 (reaffirmed 2023), is 456- 2000 and is 2502 - 2004 (reaffirmed 2024, quick setting compound (rapidite) as per is 2185 (part-i) 2005., liquid water proofing compound is-2645-2003 (reaffirmed - 2005) (using instruction-- specification for integral waterproofing compounds at the time of making concrete as per the manufacturer instructions)., 10mm dia reinforcement for water staging foundation, pvc ceiling rose 2per3 terminal as per is 371-1999(pilot 3 plate), led tube light fitting 1 x 12 w 2 feet long complete with all accessories, including led tube rod as per is 10322 (part 5persec 1) -2026, cable pvc insulated, unsheathed, single core, flexible copper conductor 1100v grade of size 1.5 sqmm is 694-2010,, xlpe insulated pvc seathed (heavy duty) armoured multi core cable 16 sqmm 2 core aluminum conductor for working voltage up to & including 1100 volt confirming to relevant is 1554 (part - i) - 2020 per is-7098 (part - i) 2025 with latest amendments ., modular switch one way 6 amps one module confirming to is 4160-2005, white cover plate with frame 2 module is 3854 - 2023., white cover plate with frame 3 module is 3854 - 2023., pvc flush box 2 module is 14772 - 2000., pvc flush box 3 module is 14772 - 2000., mcb double pole 230v ac, 50 hz, 16 amps, 10ka confirming to is - 8828-1996 iec 60898 - 2002, suitable for lighting & other domestic loads., mcb distribution board in sheet metal enclosure two ways with blanks conforming to is 8828 -1978,, ms screw 20 mm full threaded (per pkt-100 nos) conforming to is 723-1972, tape insulation 2 cm width 10 mtr long isi marked, pvc casing caping 25 mm x 16mm is 14927 (part-2)., pvc casing caping square box 4 x 4 inch as per is 14927 (part-2)., plastic body exhaust fan, 250mm sweep size with all fittings as per is 2312 -1967 (reaffirmed 2020), 3 layer pp-r polypropylene random copolymer) pipes sdr 7.4 uv stablised and 20 mm dia, thickness of wall 2.20 confirming to relevant is 15801-2008, 20mm elbow suitable for 20 mm dia pp-r pipe confirming to relevant is 15801-2008 (reaffirmed 2022), 20mm socket suitable for 20mm dia pp-r pipes confirming to relevant is 15801-2008 (reaffirmed 2022), 20mm equal tee suitable for 20mm dia pp-r pipe confirming to relevant is 15801-2008 (reaffirmed 2022), 20mm union suitable for 20mm pp-r pipes confirming to relevant is 15801-2008 (reaffirmed 2022), ppr femel threaded reducer socket 15per20mm is 15801-2008 (reaffirmed 2022), ppr femel threaded reducer elbow 15per20 mm is 15801-2008 (reaffirmed 2022), pp-r end plug 20mm confirming to relevant is is 15801-2008 (reaffirmed 2022)., pp-r pipe clamps suitable for 20mm piping is 15801-2008 (reaffirmed 2022), cp angle cock 2 way 20mm confirming to relevant is 15801-2008 (reaffirmed 2022), cp angle cock 20mm confirming to relevant is 15801-2008 (reaffirmed 2022), cp stop cock 20mm confirming to relevant is 15801-2008 (reaffirmed 2022), bib tap short body cp 20mm bore suitable for ppr water supply line . isi marked, conforming to is 781 -1984., pp-r tank connector 20mm with check nut and washer is 15801-2008, supply of 2000 litre capacity pvc rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittingsper fixtures for connecting inlet, outlet, washout and overflow pipes, hoisted incl ball brass valve, high pressure with polythene float and flynut complete, snow white colour ewc with s or p trap concealed of size 650x405x770mm wih sheet cover., vitreous china squatting pan, orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern but incluing flush pipe (l pipe) and with with p or s trap front or back inlet complete all as specified and as directed ., pvc valve less syphonic action type low level flushing cistern 10 ltrs capacity col - white with flushing pipe to match european type wc incl 15mm pvc connecting pipe with fixing brackets complete accessories. conforming to is 774-1984., ceramic wash basin snow white, oval bowl type with full pedestal height 795mm, size 550 x 400 x 155mm depth with stainless steel heavy quality bottle trap set with height adjustable waste outlet pipe for wash basin as per is 2556 - 2021 (part 4)-2021,, 600mm x 450mm looking mirror cabinet with pvc moulded frame. as per hs code 700999200, cp over head shower without arm confirming to relevant is 1172-1993 (reaffirmed in 2022)., cp soap dish for one soap confirming to relevant is 2556-2004., cp toilet paper holder (hsnperhs code 74182010), cp health faucet (abs body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and abs wall hook including making connections and fixed in position hsn 39229000,, wash basin mixer tap (hot and cold)- long body decorative type pillar tap of 20 mm nominal diameter, chromium plated, heavy duty, isi marked, suitable for 20 mm ppr water supply line, conforming to is 1795 (latest), including necessary connecting accessories., brass chromium plated bib cock long body 15mm, teflon tape is 14643-1999, 110 x 110mm cp nahani trap with jali is 14735 -1999 (reaffirmed 2021), pvc (swr) floor traps 75mm bore and jointing to waste pipe in solvent cement alongwith cp grating ., 75mm bore pvc (swr) soil, waste and vent pipe, in any length , with rubber joints,fixed vetically on wall as per is 13592-2013, 110mm bore (swr) pipes single socketed in any length with rubber ring joints fixed to wallsperfloor complete all as specified and directed as per is 13592-2013, 75mm per110mm pvc (swr) reducer complete all as specified as per is 14735 -1999, 110mm pvc (swr) junction single, (single t) equal or unequal complete all as specified as per is 14735 -1999, pvc (swr) bend any radius 110mm bore complete all as specified and directed as per is 10124 (part 9 or 10) -2009, 75mm pvc (swr) vent cowl complete all as specified as per is 13592-2013, ppr gate valves, with iron wheel head, screwed both end for ppr pipe and fixed to 20 mm bore ppr pipe complette all as specified and as directed., anaerobic advance septic tank. supply of pwts service polyethylene tank (advance version septic tank) with capacity of 1500 ltr diameter of 1300mm and height of 1400mm. drawing and features as per appx b confirming on is 2470 (part-1 and 2)- 1985 (reaffirmed 2017) ., store for anaerobic advance septic tank as per list attached as annexure 1
Agency / Dept :
Due Date :
Jun 19, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15665311
Location : tambaram , tamil nadu
tender for set of galvanised high precision hexagonal head screw, set of galvanised high precision hexagonal head screw consisting of following three items of property class 8.8 with suitable nut confirming to is 1364/2002, is1367/2002. item no. 1)m8 x 25 mm - 01 no per set. item no. 2)m8 x 30 mm - 01 nos per set. item no. 3)m8 x 35 mm - 01 nos per set. packing: each 50 sets to be packed separately in a neat polythene cover consisting of item no. 1 - 50 no., and item no. 2 - 50 no., item no. 3 - 50 no.,(per pack) while effecting supply. make for bolt and nut: lps/dfl/tvs/unbrako/ vif only. - warranty period: 30 months after the date of delivery pl code : 730974150157
Agency / Dept :
southern railway SR
Due Date :
Jun 24, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16293772
Location : hoshangabad , madhya pradesh
Source : GEM Tenders
tender for reel arm w86rufc1p71 b3 i 192 for sheeter , oscillation delivery a202uh35p90 b3 i 7.3 , counting delivery a202uh35p80 b5 i 35.4 , polythene wrap vf44 a14p63 b14 b3 0.18 kw , unwinding arm w86 rufc1 p71 b5 b3 i 240 , rewinder slitter a202 urp71 b3 i 79.9 , lay bay a603 uh60 p112 vb 4 kw 1435 rpm , reel spool injector w63 ufc1p71 b5 i 80 , briquetting screw feeder alm110 , briquetting machine agitator amf060s , shredo conveyor f77 dibe100s4 2.25 kw , sew tipo ka37 dre80m4 0.75kw imm2a, spare gearbox for motor for sheeter, as per technical specification
Agency / Dept :
security printing and minting corporation of india ltd SPMCIL
Due Date :
Aug 17, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16760631
Location : cachar , assam
Source : GEM Tenders
tender for hings steel countersunk head wire nails conforming to is 723 (q3) , non - ferrous metal butt hinges as per is 205 (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , asbestos cement plain sheet isi marked size 4 feet x 4 feet x 4 mm , bow handle alum , pvc gumboots with fabric lining single density black colour size 7 , pvc gumboots with fabric lining single density black colour size 8 , hand gloves for bt work , pbs roll 20 mtr long 1 mtr wide , coir brush , wire brush , linolium sheet 6 feet width x 0 pt 6 mm thick teak wood colour , plastic mason thread , wc indian type , wc european type , plantex platinum ceramic commode toilet s trap one piece western toilet rim washdown flush commode with soft close toilet seat cover white , pvc bib cock 0 pt 5 inch , water level pipe 10 mm , sliding bolt 12inch alluminium 300 mm with screw , tower bolt 4 inch alluminium , tower bolt 10 inch alluminium , tower bolt 6 inch alluminium , tower bolt 8 inch alluminium , tower bolt 9 inch alluminium , tower bolt 12 inch alluminium , hings 2 inch , urinal pot for gents , delinator , wash basin complete set , p trap , white cement 1 kg pack , rain coat , gi nail wire 5 inch , gi nail wire 6 inch , screw 1 inch , screw 1 pt 5 inch , screw 2 inch , plywood size 8 feet x 4 feet x 6 mm , plywood size 8 feet x 4 feet x 18 oblique 19 mm , plywood size 6 feet x 4 feet x 4 mm , plywood size 8 feet x 4 feet x 8 mm , plywood size 6 feet x 3 feet x 18 oblique 19 mm , scantling hardwood class 1 size 12 feet x 3 inch x 2 inch , scantling hardwood class 1 size 10 feet x 4 inch x 4 inch , scantling hardwood class 1 size 10 feet x 3 inch x 3 inch , scantling hardwood class 1 size 12 feet x 4 inch x 4 inch , scantling hardwood class 1 size 12 feet x 2 inch x 1 inch , sunmica 8 feet x 4 feet colour teak wood , sunmica 8 feet x 4 feet colour black , sunmica 8 feet x 4 feet colour white , polythene sheet , garden netting , ppgi sheet 8 feet x 3 feet x 0 pt 5 mm , connection pipe 2 feet long , pvc pannel board , ht wire cable pc strand , prestressing anchor cone , profiler for pre stress cable , sheathing pipe 90 mm dia , sheathing coupler for 90 mm dia , bearing plate , anchor wedges , master wedges , drainage spout , expansion joint , steel grip tape 2 inch , super plasticizer integral water proofing admixture , guided i pot bearing 380 mt , fixed pot assembly bearing 380 mt , jute mat 1 pt 83 mtr width red colour , table cloth or blazer cloth colour blue 1 mtr width , curtain cloth 1 mtr width , curtain ring , curtain rod made of alum pipe 2 mm thick and 20 feet long , door mat rubberized size 2 feet x 2 feet x 1 inch , door mat coir 12 inch x 12 inch x 1 inch , door mat rubberized of size 2 feet x 4 feet x 1 inch , wall clock , electric calling bell with remote , office mirror 2 feet x 5 feet , borosil or eqvt glass large , borosil or eqvt glass small , twin jute , duster cloth , pad lock 6 lever 50 mm , 3 pin universal socket 16 amp , 3 pin universal socket 6 amp , 3 pin plug top poly carbonate 16 amp , 3 pin plug top poly carbonate 6 amp , 3 pin combined switch and socket 15 oblique 16 amp , switch and socket combined 3 pin 5 oblique 6 amp , bed switch one way 5 amp , switch 6 amp , switch 16 amp , angle holder , pendent holder , batten holder , copper flexible 2 core wire 1 pt 5 mm , copper flexible 4 pt 0 sqm , pvc insulated heavy duty industrial cables copper conductor single core roll of 90 mtr and 1 sqm , pvc insulated heavy duty industrial cables copper conductor single core roll of 90 mtr and 1 pt 5 sqm , pvc insulated heavy duty industrial cables copper conductor single core roll of 90 mtr and 2 pt 5 sqm , pvc insulated heavy duty industrial cables copper conductor single core roll of 90 mtr and 4 sqm , pvc insulated heavy duty industrial cables copper conductor single core roll of 90 mtr and 6 sqm , casing caping 1 inch width x 2 mtr long , change over switch 100 amp , solar lamp complete set with battery , electronic regulator for ceiling fan , capacitor for ceiling fan , flexible wire , insulation tape0 pt 5 inch 10 mtrs roll , led bulb 15 watt , led bulb 9 watt , led bulb 20 watt , led complete set 2 inch tube light , led tube light complete set 4 feet , led street light 20 oblique 30 watt complete set , electric emergency light , main switch size 3 phase 63 amp , main switch size single phase 16 amp , main switch size 60 amp , main switch size 3 phase100 amp , mini switch circuit breaker mcb c series size 6 oblique 10 amp , mini switch circuit breaker mcb c series size 15 oblique 16 amp , mini switch circuit breaker 3 phase mcb c series size 63 amp , mini switch circuit breaker mcb c series size 32 amp , main switch circuit breaker 3 phase mcb c series size 100 amp , pvc square box size 4 inch x 4 inch , pvc square box size 10 inch x 12 inch , pvc square box size 8 inch x 10 inch , pvc square box size 8 inch x 6 inch , pvc square box size 6 inch x 4 inch , pvc square box size 8 inch x 8 inch , pvc square box size 7 inch x 4 inch , led light 18 watt , bulb zero watt red , bulb zero watt blue , exhaust fans 14 inch , wall fan plastic , multimeter digital , tape measuring metalic 30 mtrs , tape measuring metalic 15 mtrs , tape measuring steel 30 mtrs , tape measuring steel 03 mtrs , hammer stone bracking 2 kgs , hammer stone bracking 2 pt 5 kgs oblique 4 lbs , hammer stone bracking 1 pt 5 kgs oblique 4 lbs , spring balance 100 kgs , tiles cutter blade , cutting pliers, as per specification
Agency / Dept :
border road organisation BRO
Due Date :
Aug 24, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Polythene Screw. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Polythene Screw sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Polythene Screw Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Polythene Screw, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Polythene Screw Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Polythene Screw Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Polythene Screw.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Polythene Screw depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Polythene Screw Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Polythene Screw bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Polythene Screw. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Polythene Screw, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Polythene Screw, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Polythene Screw?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Polythene Screw tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Polythene Screw?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Polythene Screw, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Polythene Screw is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All