sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

22Latest Pin pusher Tenders List

Latest Pin pusher Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Pin pusher tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Pin pusher tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Pin pusher Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Pin pusher tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Pin pusher Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Pin pusher Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Pin pusher Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Pin pusher tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Pin pusher Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Pin pusher sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Pin pusher tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Pin pusher tenders.

Is EMD mandatory for all Pin pusher tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Pin pusher work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Pin pusher tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Pin pusher Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16708508
Location : karwar , karnataka
Source : GEM Tenders
LIVE TENDER
tender for inspection, packing and supply of seal spacer as per drawing no. kaiga-3-35221-3283-dd and as per attached specifications , 12. procurement of raw material, testing, manufacturing, inspection, packing and supply of sensor spring as per drawing no. kaiga-3-35221-3285-dd and as per attached specifications , 13. procurement of raw material, testing, manufacturing, inspection, packing and supply of spring bearing pin as per drawing no. kaiga-3- 35221-3292-dd and as per attached specifications , 14. procurement of raw material, testing, manufacturing, inspection, packing and supply of lug as per drawing no. kaiga-3-35221-3294-dd and as per attached specifications , 15. procurement of raw material, testing, manufacturing, inspection, packing and supply of c-piston extension as per drawing no. kaiga-3-35221-3290-dd and as per attached specifications , 16. procurement of raw material, testing, manufacturing, inspection, packing and supply of c- piston head as per the attached drawing no.kaiga-3- 35221-3297-dd-r1 and as per attached specifications , 17. procurement of raw material, testing, manufacturing, inspection, packing and supply of b and d bush as per the attached drawing no.kaiga-3-35221-3302-dd-r1 and as per attached specifications , 18. raw material, testing, manufacturing, inspection, packing and supply of b and d piston extension as per the attached drawing no.kaiga-3- 35221-3304-dd-r1 and as per attached specifications , 19. raw material, testing, manufacturing, inspection, packing and supply of glass switch retaining tube as per the attached drawing no.kaiga-3-35221-3305-dd-r1 and as per attached specifications , 20. procurement of raw material, testing, manufacturing, inspection, packing and supply of c- bush as per the attached drawing no.kaiga-3-35221-3306- dd-r1 and as per attached specifications , 21. raw material, testing, manufacturing, inspection, packing and supply of a, b and d piston head as per the attached drawing no.kaiga-3-35221-3307-dd-r1 and as per attached specifications , 22. procurement of raw material, testing, manufacturing, inspection, packing and supply of dowel pin as per the attached drawing no.kaiga-3-35221-3311- dd-r1 and as per attached specifications , 23. procurement of raw material, testing, manufacturing, inspection, packing and supply of dowel pin as per the attached drawing no.kaiga-3-35221-3312-dd-r1 and as per attached specifications , 24. procurement of raw material, testing, manufacturing, inspection, packing and supply of a-sleeve as per the attached drawing no.kaiga-3-35221-3313-dd-r1 and as per attached specifications , 25. procurement of raw material, testing, manufacturing, inspection, packing and supply of b and d-sleeve as per the attached drawing no.kaiga-3-35221-3314-dd-r1 and as per attached specifications , 26. procurement of raw material, testing, manufacturing, inspection, packing and supply of c-sleeve as per the attached drawing no.kaiga-3-35221-3315-dd-r1 and as per attached specifications , 27. procurement of raw material, testing, manufacturing, inspection, packing and supply of magnet as per the attached drawing no.kaiga-3- 35221-3318-dd-r1 and as per attached specifications , 28. procurement of raw material, testing, manufacturing, inspection, packing and supply of magnet locator as per the attached drawing no. kaiga-3-35221-3320-dd-r1 and as per attached specifications , 29. procurement of raw material, testing, manufacturing, inspection, packing and supply of hex. socket head cap screw m-12 x 1.75-4h, spare components, procurement of raw material, testing, manufacturing, inspection, packing and supply of cylinder block assembled with plug-kaiga-3-35221-3317-dd-as per the attached drawing no.kaiga-3-35221-3262-dd-r3 and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of spacer as per drawing no. kaiga-3/35221/3263/dd and as per attached specifications., procurement of raw material, testing, manufacturing, inspection, packing and supply of guide cylinder as per drawing no. kaiga-3/35221/3264/dd and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of sensor shaft as per drawing no. 006/35221/0030/dd and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of sensor tip as per drawing no. 006/35221/0029/dd and as per attached specifications, procurement of material, testing of material as per specifications attached, cleaning, inspection, manufacturing, surface hardening/heat treatment, testing, final inspection and supply of f/m head- sensor stop & pusher assembly stop pin as per drg. no. kaiga-3/35221/3272/dd, procurement of raw material, testing, manufacturing, inspection, packing and supply of shim as per drawing no. kaiga-3/35221/3273/dd and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of piston pin as per drawing no. kaiga-3/35221/3277/dd and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of spacer as per drawing no. kaiga-3/35221/0027/dd and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of a-bush as per drawing no. kaiga-3/35221/3280/dd and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of seal spacer as per drawing no. kaiga-3/35221/3283/dd and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of sensor spring as per drawing no. kaiga-3/35221/3285/dd and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of spring bearing pin as per drawing no. kaiga-3/35221/3292/dd and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of lug as per drawing no. kaiga-3/35221/3294/dd and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of c-piston extension as per drawing no. kaiga-3/35221/3290/dd and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of c-piston head as per the attached drawing no.kaiga-3/35221/3297/dd/r1 and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of b and d bush as per the attached drawing no.kaiga-3/35221/3302/dd/r1 and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of b and d piston extension as per the attached drawing no.kaiga-3/35221/3304/dd/r1 and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of glass switch retaining tube as per the attached drawing no.kaiga-3/35221/3305/dd/r1 and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of c-bush as per the attached drawing no.kaiga-3/35221/3306/dd/r1 and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of a, b & d piston head as per the attached drawing no.kaiga-3/35221/3307/dd/r1 and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of dowel pin as per the attached drawing no.kaiga-3/35221/3311/dd/r1 and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of dowel pin as per the attached drawing no.kaiga-3/35221/3312/dd/r1 and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of a-sleeve as per the attached drawing no.kaiga-3/35221/3313/dd/r1 and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of b & d-sleeve as per the attached drawing no.kaiga-3/35221/3314/dd/r1 and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of c-sleeve as per the attached drawing no.kaiga-3/35221/3315/dd/r1 and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of magnet as per the attached drawing no.kaiga-3/35221/3318/dd/r1 and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of magnet locator as per the attached drawing no.kaiga-3/35221/3320/dd/r1 and as per attached specifications, procurement of raw material, testing, manufacturing, inspection, packing and supply of hex. socket head cap screw m-12 x 1.75-4h lg-40 hts cadmium plated, procurement of raw material, testing, manufacturing, inspection, packing and supply of hex socket set screw (cup point) m6 x 1 - 4h lg - 10 ss, procurement of raw material, testing, manufacturing, inspection, packing and supply of helicoil sl1-sl-c4-cn6, procurement of raw material, testing, manufacturing, inspection, packing and supply of hex. socket head cap screw m16 x 2 - 4h lg 90 hts cadmium plated, procurement of raw material, testing, manufacturing, inspection, packing and supply of hex socket head cap screw m8 x 1.25 -4h long 20 ss 304, procurement of raw material, testing, manufacturing, inspection, packing and supply of helicoil sl1-sl-c8-cn 16., procurement of raw material, testing, manufacturing, inspection, packing and supply of hex socket head cap screw m5 x 0.8 4h long 18 ss 304, procurement of raw material, testing, manufacturing, inspection, packing and supply of hex. socket head cap screw m10 x 1.5-4h long 120 hts cadmium plated, procurement of raw material, testing, manufacturing, inspection, packing and supply of hex soc head cap screw ( cup point) m8 x 1.25-6h long 30 hts cadmium plated, procurement of raw material, testing, manufacturing, inspection, packing and supply of spring bearing plate as per the attached drawing no.kaiga-3/35221/3325/dd/r1 and as per attached specifications
Agency / Dept :
nuclear power corporation of india limited NPCIL
Due Date :
Sep 02, 2026 (2 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16682237
Location : koraput , odisha
Source : GEM Tenders
tender for procurement of non standard spares for aero engine packing box - 969112001 , 969112002 , 969112003 , 969112004 , 969113100 , 969113300 , 969113004 , 969113005 , 969113007 , 969113008 , 969113022 , 969113023 , 969113024 , 969113025 , 969113026 , 969113027 , 969113028 , 969113029 , 969113031 , 969113032 , 969113034 , 969113036 , 969114100 , 969114200 , 969114300 , 969114400 , 969114011 , 969114012 , 969114013 , 969114014 , 969114017 , 969114018 , 969114019 , 969115000 , 950263035 , 950263034 , sjm482 , 969113400c , 9991283400c , 910011007 , 969113019 , 969113021, bolt, nut, washer, undersuspension, frame, angle, ceilingangle, cover, lug, pin, limiter, pusher/latch, backplate, visor, ring, organicglass, lowersuspenssion, squarewasher, loop, bush, casing, hoop, documentself, inspecitionwindow, supportforcaing
Agency / Dept :
hindustan aeronautics limited HAL
Due Date :
Aug 28, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16449990
Location : tatanagar , jharkhand
Source : GEM Tenders
tender for pusher for limit switch as per attached drawing, moc- galvanized alloy steel, suitable to all boomer , pin (link) as per attached drawing, moc- en 24 & surface hardening upto 2 mm, suitable to all boomer
Agency / Dept :
uranium corporation of india limited UCIL
Due Date :
Aug 17, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15619031
Location : medak , telangana
Source : GEM Tenders
tender for 9p5602066 flange for welding , 9p13501062 bushing for ep , 9p13501082 bushing for ep , 9p5602054 safety washer for ep , 9s47400052-01 stud for ep , 9p56m00022 washer for ep , 9b811037 link for ep , 9p5602068 stop for welding , 9p5603025 tip for ep , 9p56m00022-04 washer for ep , 9p13501042 pin for ep , 9p5602045 bush for ep , 9p5605018 nut for ep , 9p13501006 pole shoe for ht , 9p13501081 washer for ep , 9p5605028 bush for ht , 9p5602009 casing for welding , 9p5602047 bush for ep , 9p5605013 bush , 9p13501033 gasket , 9p5605022 washer for ht , 9p13501089 pusher for ep , 9p5603001 axle for welding , 9p5601029 plunger for ht , 9p5607043 eye for ep , 9p13501032 gasket , 9p5605019 plug for ep , 9p5600022 nut for ht, 28 types of components, 9p5602066, 9p13501062, 9p13501082, 9p5602054, 9s47400052-01, 9p56m00022, 9b811037, 9p5602068, 9p5603025, 9p56m00022-04, 9p13501042, 9p5602045, 9p5605018, 9p13501006, 9p13501081, 9p5605028, 9p5602009, 9p5602047, 9p5605013, 9p13501033, 9p5605022, 9p13501089, 9p5603001, 9p5601029, 9p5607043, 9p13501032, 9p5605019, 9p5600022
Agency / Dept :
bharat dynamics limited BDL
Due Date :
Jun 16, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15632113
Location : panipat , haryana
Source : GEM Tenders
tender for bearing uc-205 , bearing ucpa-205 , bearing ucp-207 , bearing with housing ucp212d1 , bearing 6000-llb-c3 , bearing 6005-2rs1 , bearing 6007-du , bearing 6013- zz , bearing 6200-2z , bearing 6201-2z , fan bearing 6202-2z , bearing 6205-2rs1 , bearing 6206 , gear for bag placer big , bearing 7204 , locktite 574 , grid bar outer chain grid , stop brush outer chain grid , bellow sucker singling out device , filter sucker opening unit , vacuum pipe 1 inch , pressure gauge -0 to 15 psi , coil indication and emc suppression module , 95.05. relay socket 250v 10a 2pole relay , rubber stop - stripper plate , door handle ss , magazine cover big , magazine cover small , cable cu 4cx2.5sq mm pvc ins shtd arm , spreader sprocket , positioning roller shaft , elevator drive spocket lock l-lock , spreader middle gear shaft , elevator drive sprocket guide teflon , stripper plate motor key , movable cable tray system- row pusher , row pusher up-down roller lock , timing belt for palletiser , timing sprocket , gear for bag placer-small , 3 way legris valve , driving belt row pusher c060019 , taper lock 25 mm , drive pulley of stitching machine , stitching machine motor pulley , orientation clamp angle 1 , orientation clamp angle 2 , orientation clamp base , grouping belt stud , stitching machine v belt cover , purging regulator genatics r13614 , magazine door hinge , spreader middle gear , spreader arm gear , stripper plate belt tightner bracket , swing arm fixing bracket , stitching machine base pin , conforming base plate , conforming back angle plate , elevator teflon guide , brg ball single row skf 6203 2rs 2z , outer chain with pin link , takeaway turning sprocket , stripper plate shaft with keys , row pusher shaft , outerchain shaft , big sprocket bearing type , big sprocket fix type , row pusher pulley shaft end , pulley row pusher motor end , clamping piece -toggle joint unit gusset gripper clamp , clamping piece - bag spreader clamp , swivel head- gusset gripper , bearing wheel - row pusher teflon g020002 , roller chain stainless steel infeed chain , metal guide , safety switch , non return valve-6 153463 , lithium battery cr2330 3v panasonic big , key way roller dia -65 , key way roller dia-80 , flat roller dia-65 isas arm , bag placer clamp , guiding stripper plate g070043 , guiding stripper plate g070044 , spreader hollow shaft ss , isas belt adjuster tightner , infeed chain coupling , seal kit vacuum pump pneumatic , cutter sov - janatics ds255sr61-w-24v dc indirect solenoid actuated spool valves 5 by 2 , outer chain full lock - half inch rolon or diamond , sm filter , stripper motor cover , double keyway roller dia 85 , drive roller dia-85 , ball bearing 608rs , fan motor , pressure switch- pneumatic smc , roller - conveyor r020036 , roller - conveyor r020017 , air jack - pneumatic v520019, rate contract for spares of bagging and palletizing machines, m8 x 30 hex bolt with nut, m8 x 40 hex bolt with nut, m8 x 50 hex bolt with nut, m8 x 60 hex bolt with nut, m10 x 30 hex bolt with nut, m10 x 40 hex bolt with nut, m10 x 50 hex bolt with nut, m10 x 60 hex bolt with nut, m12 x 30 hex bolt with nut, m12 x 40 hex bolt with nut, m12 x 50 hex bolt with nut, m12 x 60 hex bolt with nut, m14 x 30 hex bolt with nut, m14 x 40 hex bolt with nut, m14 x 50 hex bolt with nut, m14 x 60 hex bolt with nut, m16 x 30 hex bolt with nut, m16 x 40 hex bolt with nut, m16 x 50 hex bolt with nut, m16 x 60 hex bolt with nut, m6 x 20 hex bolt with nut, m6 x 30 hex bolt with nut, m6 x 40 hex bolt with nut, m6 x 50 hex bolt with nut, m4 x 10 hex bolt with nut, m4 x 20 hex bolt with nut, m4 x 30 hex bolt with nut, m4 x 40 hex bolt with nut, m4 x 10 allen key socket cap head bolt w, m4 x 20 allen key socket cap head bolt w, m4 x 30 allen key socket cap head bolt w, m4 x 40 allen key socket cap head bolt, m6 x 30 allen key socket cap head bolt w, m6 x 40 allen key socket cap head bolt w, m6 x 50 allen key socket cap head bolt w, m8 x 30 allen key socket cap head bolt w, m10 x 30 allen key socket cap head bolt, plain washer m4 bolt size, plain washer m6 bolt size, plain washer m8 bolt size, plain washer m10 bolt size, plain washer m12 bolt size, plain washer m14 bolt size, plain washer m16 bolt size, nylon-66 cable tie 100mm, nylon-66 cable tie 150mm, nylon-66 cable tie 200mm, nylon-66 cable tie 250mm, retro-reflective sheet, 2205 e bearing, bearing 6006zz, bearing unit ucp204, housing and bearing t204, housing and bearing ucfl205, bearing ucf-206, bearing uc-205, bearing ucpa-205, bearing ucp-207, bearing with housing ucp212d1, bearing 6000-llb-c3, bearing 6005-2rs1, bearing 6007-du, bearing 6013-zz, bearing 6200-2z, bearing 6201-2z, fan bearing 6202-2z, bearing 6205-2rs1, bearing 6206, gear for bag placer big, bearing 7204, locktite 574, grid bar outer chain grid, stop brush outer chain grid, bellow sucker singling out device, filter sucker opening unit, vacuum pipe 1 inch, pressure gauge -0 to 15 psi, coil indication and emc suppression module, 95.05. relay socket 250v 10a 2pole relay, rubber stop - stripper plate, door handle ss, magazine cover big, magazine cover small, cable cu 4cx2.5sq mm pvc ins shtd arm, spreader sprocket, positioning roller shaft, elevator drive spocket lock l-lock, spreader middle gear shaft, elevator drive sprocket guide teflon, stripper plate motor key, movable cable tray system- row pusher, row pusher up-down roller lock, timing belt for palletiser, timing sprocket, gear for bag placer-small, 3 way legris valve, driving belt row pusher c060019, taper lock 25 mm, drive pulley of stitching machine, stitching machine motor pulley, orientation clamp angle 1, orientation clamp angle 2, orientation clamp base, grouping belt stud, stitching machine v belt cover, purging regulator genatics r13614, magazine door hinge, spreader middle gear, spreader arm gear, stripper plate belt tightner bracket, swing arm fixing bracket, stitching machine base pin, conforming base plate, conforming back angle plate, elevator teflon guide, brg ball single row skf 6203 2rs 2z, outer chain with pin link, takeaway turning sprocket, stripper plate shaft with keys, row pusher shaft, outerchain shaft, big sprocket bearing type, big sprocket fix type, row pusher pulley shaft end, pulley row pusher motor end, clamping piece -toggle joint unit gusset gripper clamp, clamping piece - bag spreader clamp, swivel head- gusset gripper, bearing wheel - row pusher teflon g020002, roller chain stainless steel infeed chain, metal guide, safety switch, non return valve-6 153463, lithium battery cr2330 3v panasonic big, key way roller dia -65, key way roller dia-80, flat roller dia-65 isas arm, bag placer clamp, guiding stripper plate g070043, guiding stripper plate g070044, spreader hollow shaft ss, isas belt adjuster tightner, infeed chain coupling, seal kit vacuum pump pneumatic, cutter sov - janatics ds255sr61-w-24v dc indirect solenoid actuated spool valves 5 by 2, outer chain full lock - half inch rolon or diamond, sm filter, stripper motor cover, double keyway roller dia 85, drive roller dia-85, ball bearing 608rs, fan motor, pressure switch- pneumatic smc, roller - conveyor r020036, roller - conveyor r020017, air jack - pneumatic v520019 rexroth r424b07296
Agency / Dept :
indian oil corporation limited IOCL
Due Date :
Jun 17, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15675277
Location : koraput , odisha
Source : GEM Tenders
corrigendum tender for supply of tools as per drawing provided by hal sht0001 , sht0002- 1 to 12 , sht0003 , sht0004 , sht0005 , sht0007 , sht0008 , sht0009 , sht0010 , sht0011 , sht0012 , sht0013 , sht0014 , sht0016 , sht0018 , sht0020 , sht0021 , sht0022 , sht0023 , sht0024 , sht0025 , sht0028 , sht0029 , sht0030 , sht0031 , sht0032 , sht0033 , sht0034 , sht0035 , sht0037 , sht0038 , sht0039 , sht0040 , sht0041 , sht0042 , sht0043 , sht0044 , sht0045 , sht0046 , sht0047 , sht0048 , sht0049 , sht0050 , sht0051 , sht0052 , sht009600 , sht01400 , sht015800 , sht021100 , sht022100 , sht024900 , ta5122g001 , ta5124g001 , ta5127g001 , tm0818g001 , tm1034g001 , tm1397g001 , tm1435g001 , tm1437g001 , tm1689g001 , tm2040g001 , tm2253g001 , tm2263g001 , tm2505g001 , tm2529g001 , tm2530g001 , tm2531g001 , tm2573g002 , tm2574g002 , tm2577g001 , tm2579g001 , tm2582g002 , tm2583g002 , tm2586g001 , tm2587g001 , tm2588g001 , tm2626g001 , tm2665g001 , tm2666g001 , tm2668g001 , tm2670g001 , tm2671g001 , tm2673g001 , tm2675g002 , tm2676g001 , tm2679g001 , tm2686g002 , tm2687g002 , tm2688g002 , tm2689g003 , tm2710g001 , tm2721g001 , tm2733g001 , tm2735g001 , tm2736g002 , tm2745g002 , tm2746g002 , tm2760g001, base, bearing assembly tool, locator, bearing assy tool, gear assy tool, immobilization tool, adaptor, special wrench, spercial wrench, immobizer adaptor, set of blanks, sealing spacer assy tooling, power shaft assy tool, immobilizing tool, turnover fixture, tray, extractor adaptor, extractor jaws, bearing extractor jaws, extractor, threaded extracting tool, guide, spacer, handling screw, immobilizer, balancing mandrel, supporting base, linear fitting tool, dowel pin assy. tool, dowel fitment fixture, blank, plug, support, measuring tool, plunger, cranked pusher, assembly carriage, threaded extractor, standard dia 241.16, inspection tool, master dia 291.02, assembly support, plate assembly, plate cutting tool, plate assembly tool, protection case, compressor impeller setting tool, flipping tool, protector, support of assembly, tool storage handling, front bearing removal tool, maintain tool, spanner & immobilizer, tool for binding segments, relation tool, tightening tool by elongation, handling tool, special key, impeller support, wrench, take off segments, fixing tool
Agency / Dept :
hindustan aeronautics limited HAL
Due Date :
Jun 09, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15809443
Location : purnia , bihar
Source : GEM Tenders
tender for supply of mechanical maintenance spares at purnea lpg plant pneumatic cylinder 50 or 80 norgan - magnetic , pneumatic cylinders 40x300 hex - for gd or pt head , pneumatic cylinders 40x400 hex - for gd or pt head , pneumatic cylinders 32x250 , pneumatic cylinders 50x250 , pneumatic tube 4mm , pneumatic pipe 8mm , pneumatic pipe 6mm , pneumatic fittings- elbow 8mm , pneumatic fittings- elbow 6mm , pneumatic fittings- elbow 4mm , pneumatic fitting straight 4mm , pneumatic fitting straight 6mm , pneumatic fitting straight 8mm , reducer 10x8 mm pneumatic , reducer 8x6 mm pneumatic , reducer 6x4 mm pneumatic , jointer 8x8 mm pneumatic , jointer 6x6 mm pneumatic , 3 or 2 push pull return valve- spring type , 5 or 2 push pull return valve- spring type , gd and pt toggle joint , allen key set - 1 to 10 mm- non-sparking , centering arm,108680,carousel kosncris , antenna valve 3 or 2 festo , antenna rod , duplex 24 teeth sprocket bore 60 mm , duplex 14 teeth sprocket , duplex 28 teeth sprocket bore 60 mm , duplex 18 teeth sprocket , sprocket 14 teeth , 8 teeth sprocket , conveyor chain rivet pin or drive chain pin , brg unit,plumber block,p212 size- 60mm , star coupling rubber 150 , star coupling rubber 110 , star coupling 150 , gd or pt arm roller , introduction pusher pad , manual sealing head with 2.5m hose pipe , kosan filling gun pneumatic o-ring set , kosan filling gun nonpneumatic o-ring set , siraga make filling gun , siraga make filling o-ring set , stopper roller for conveyor , sensor sick wt24 diffusive type , sensor cable 2.5 meter , solenoid valve , adapter with nrv , pressure gauge glycerine 0-16kg or cm2 6 inch , pressure gauge glycerine 0-16kg or cm2 dial 4 inch , frl unit festo,size- 1 or 2in frl 1 or 4 inch with pressure guage , quick exhaust valve 1 or 4 festo or norgen , quick exhaust valve 1 or 8 festo or norgen , spray,wd-40 cap- 400ml btl , cassette ss as per kosan carousel , guide rod for kosan introduction unit , 5 or 2 spring return valve , 1 or 2inch -f, ss ball valve , magnetic sensor , tepar strip for 90 deg bend , lock pin,chain conveyor duplex chain , switch,139a714,carousel kosncris - pressure switch , ejection puller arm , ejection pusher arm , needle valve , pneumatic cylinder 12mm or 16mm with fittings , shaft size- 40mm x 280 mm en-8 , shaft size- 40mm x 4000 mm en-8 , nut bolt 1.5inch x 10mm , nut bolt 1inch x10mm , f-mounting , ejection flexible coupling , pneumatic cylinder- 50 or 160- norgen or smc , toggle joint rod- lt-200 mm , pin of non-pneumatic filling gun , bearing no.6206 , bearing no.6304 , gas stop valve lpg 1 or 2inch , steel plate thick 10mm size 0.5mx0.5m , key pad for cuc card steel mk1v , key pad for cuc card mkii , anchor fastener length150mm dia 10mm gi , anchor fastener length150mm dia 12mm gi , anchor fastener length150mm dia 16mm gi , nut bolt length 1inch dia 6 mm , counter bolt 8mm, allenkey type, with lock nut , eye bolt for centering arm , spring,159a533,kosncris pt head , ss rod of gd or pt base , ss block of gd or pt base , linear bearing , optical cable for bar code sensor , automatic hot air sealing head , pneumatic cylinder size 500mmx50 norgan , 50 dia sealkit norgren , 50 dia sealkit janatics , solenoid coil for kosan filling scale- smc make , lpg hose of length 1 m , lpg hose of length 1.5 m , lpg hose of length 0.5 m , pencil sensor , rivet type conveyor chain , rod of kosan filling gun pneumatic type , kosan filling gun cup , dpner or kosan filling gun bush , kosan filling scale leg , lower bell for gd , vibration absorber for gd head , kosan fintec load cell for filling scale 200kg , load cell for jisl adjustment scale 650 kg , manual cvt head,kpot0122 carousel,kosncr , lifter plate for check scale , c channel of conveyor , telescopic boom pipe length 6m dia 1.5inch , drag chain , boom e plate with taflon ss thickness-10mm 1mx1m with taflon 12mm , mark iv display , reflector for kosan carousel , lpg filling gun pneumatic type , pneumatic counter , vacuum or, supply of mechanical maintenance spares at purnea lpg plant, as per buyer added bid specific atc and item specification
Agency / Dept :
hindustan petroleum corporation limited HPCL
Due Date :
Jun 23, 2026
Tender Value :
50.48L
View Documents
T18 Ref No : 15929016
Location : unnao , uttar pradesh
Source : GEM Tenders
corrigendum tender for gd m.c head lower bell , neauprene seal,hydrotesting unit , l bend for filling gun , gd.pt ms sliding bush , screw for pneumatic cylinder , supporting rod ss 40x300 for gd.pt , ss locking bush for clamping rod , pneumatic cylinder shaft 50x160 short thread , pneumatic cylinder shaft 50x160 long thread , v belt a 66,b62,b66 antistatic , pneumatic cylinder norgren.festo 63x25 , lot adopter , plummer block ucp 212 ntn bearing , vibration rubber damper , upper head brass for antennae valve ,norgren , manual sealing gun , antennae valve ,norgren , wd 40 spray , thread locker , 40x400 and 40x400 cylinder guide rail , lens for optical fibre z017400 , coil for metalwork valve , pu seal for gd lower bell , optical fibre cable,sick , push button air valve ,pneumax , spring for centering gun , allen csk bolt 6x50mm,10x30mm ht tvs , chain lock make diamond , pneumatic cylinder shaft 50x80 short thread , roller clamping arm for gd and pt , hot air sealing gun straight type , base of gd ,central section ms , ht bolt 8x40 mm,8x75mm , hexagonal bolt with nut and washer 10x40mm , nut bolt with washer 12 x40 mm , hexagonal bolt with nut and washer 16x75mm , antennae wire , vision unit antennae rod , flameproof sealing unit sensor , yoke plate , clp rd sds drill bit hammer 6x160,12x260,16x350mm , it hss drill p.s 8,10,12 mm , welding electrode 3to 15mm ,manglam , seal kit ck 95 40 , teflon roller with dual bearing , flexible coipling 16x1to 5 ,for introduction unit , pt gun bottom ss head to 6 hole of 8 mm , sensor cable to 1,3,5,7,10mtr , allen csk bolt 0.5x2mm ht tvs , wheel for carousel , welding rod ss to esab make , reflector to white , load cell cable mk 4 , load cell cable to check scale , ss wheel to telescopic boom , mounting for gd cylinder , nylock nut to 6,8 ,10mm , ms anchor fastener 16x150, 12x150 , frl 0.5 inch , pneumatic single pilot valve 2.5 , clamping guide ms block , linear bearing , guide rod ejection unit,introduction unit , conveyor bend teflon , seal kit 50x160 to norgren , elbow connector, size 0.25inchx4mm , elbow connector,size 0.25inchx6mm , elbow connector,size 0.25inchx8mm , elbow connector,size 0.125inchx4mm , elbow connector,size 0.125inchx6mm , elbow connector,size 0.125inchx8mm , elbow connector,size 0.5inchx8mm , elbow connector,size 0.5inchx10mm , elbow connector,size 0.5inchx12mm , reducer,pu, size 6to 4mm,8to 4mm , reducer,pu, size 8to 6mm , reducer,pu, size 10to 8mm , reducer,pu, size 12to 8mm , connector,straight, size 4x4mm,8x8mm , connector,straight, size 6x6mm , connector,straight, size 10x10mm , connector,straight, size 12x12mm , t connector,size 4x4x4mm , t connector,size 6x6x6mm , t connector,size 8x8x8mm , t connector,size 10x10x10mm , t connector,size 12x12x12mm , wll24to 2x430501 ,optical sensor , pu tube 10mm and 12 mm , pu tube 8 mm , pu tube 6 mm , pu tube 4 mm , hot air sealing gun baliga and flameproof type , pressure gauge 2inch ,0to 10 kg per cm2 micro , pressure gauge 4inch ,0to 10 kg per cm2 micro, consumables spares, 8 teeth sprocket with teflon bush, drive unit, pneumatic cylinder 40x400 metalwork flat shaft, 14 teeth sprocket, conveyor, pillow block bearing, drive chain riveted pin, counter weight, chain set, conveyor chain ,riveted type, double stopper set, conveyoyor uhmwear strip, 40x10x2500 mm, taper strip 1850x32x1.625 mm, taper strip 1550x32x1.625 mm, spider l 150, hacksaw blade,hss,12x0.5in ,mirinda, hacksaw frame, electrode, weld,e6013,3.15mm, grinding wheel ag4 packet, cutting wheel ag4 packet, bolt,hex,ms, 1.5inx10mm,2inx10mm, 16mmx4in,1inx4mm,1inx8mm,1.5inx8mm, tipped drill bit,8,10,12mm packet, drill bit,grouting,hss,m10,m12,m16, 10mm,12mm,16mm grouting bolts, cable tie, size 150mm ,200mm, 250mm, 300mm packet, wear strip, soldering iron rod, brass block gdpt, rectangular block gdpt, shaft 60 mm od x 850 mm length, duplex chain 3 mtr, pneumatic cylinder d 40 l 300 metalwork with flat shaft, introduction cylinder d 50 l 450 norgren, clamping cylinder d 50 l 160 norgren, stopper cylinder back mounting norgren, arms set carousel, gas stop valve service kit, wear strip 50x6 mm 50 mtr roll, toggle joint, under cover gi for conveyor, coupling patta, pusher rubber pad,with ss bush, spindle for pt gun,pressure drop, eye bolt for filling machine, pneumatic cylinder 50x80,norgren, piston rod 40x300,hexagon, piston rod 40x400,hexagon, u seal kit hexagon, deadman switch industrial 2.5 0.25inch ,dp055061, wt 24 2x 400 diffuse sensor ,sick, pencil inductive sensor, gd m.c head lower bell, neauprene seal,hydrotesting unit, l bend for filling gun, gd.pt ms sliding bush, screw for pneumatic cylinder, supporting rod ss 40x300 for gd.pt, ss locking bush for clamping rod, pneumatic cylinder shaft 50x160 short thread, pneumatic cylinder shaft 50x160 long thread, v belt a 66,b62,b66 antistatic, pneumatic cylinder norgren.festo 63x25, lot adopter, plummer block ucp 212 ntn bearing, vibration rubber damper, upper head brass for antennae valve ,norgren, manual sealing gun, antennae valve ,norgren, wd 40 spray, thread locker, 40x400 and 40x400 cylinder guide rail, lens for optical fibre z017400, coil for metalwork valve, pu seal for gd lower bell, optical fibre cable,sick, push button air valve ,pneumax, spring for centering gun, allen csk bolt 6x50mm,10x30mm ht tvs, chain lock make diamond, pneumatic cylinder shaft 50x80 short thread, roller clamping arm for gd and pt, hot air sealing gun straight type, base of gd ,central section ms, ht bolt 8x40 mm,8x75mm, hexagonal bolt with nut and washer 10x40mm, nut bolt with washer 12 x40 mm, hexagonal bolt with nut and washer 16x75mm, antennae wire, vision unit antennae rod, flameproof sealing unit sensor, yoke plate, clp rd sds drill bit hammer 6x160,12x260,16x350mm, it hss drill p.s 8,10,12 mm, welding electrode 3to 15mm ,manglam, seal kit ck 95 40, teflon roller with dual bearing, flexible coipling 16x1to 5 ,for introduction unit, pt gun bottom ss head to 6 hole of 8 mm, sensor cable to 1,3,5,7,10mtr, allen csk bolt 0.5x2mm ht tvs, wheel for carousel, welding rod ss to esab make, reflector to white, load cell cable mk 4, load cell cable to check scale, ss wheel to telescopic boom, mounting for gd cylinder, nylock nut to 6,8 ,10mm, ms anchor fastener 16x150, 12x150, frl 0.5 inch, pneumatic single pilot valve 2.5, clamping guide ms block, linear bearing, guide rod ejection unit,introduction unit, conveyor bend teflon, seal kit 50x160 to norgren, elbow connector, size 0.25inchx4mm, elbow connector,size 0.25inchx6mm, elbow connector,size 0.25inchx8mm, elbow connector,size 0.125inchx4mm, elbow connector,size 0.125inchx6mm, elbow connector,size 0.125inchx8mm, elbow connector,size 0.5inchx8mm, elbow connector,size 0.5inchx10mm, elbow connector,size 0.5inchx12mm, reducer,pu, size 6to 4mm,8to 4mm, reducer,pu, size 8to 6mm, reducer,pu, size 10to 8mm, reducer,pu, size 12to 8mm, connector,straight, size 4x4mm,8x8mm, connector,straight, size 6x6mm, connector,straight, size 10x10mm, connector,straight, size 12x12mm, t connector,size 4x4x4mm, t connector,size 6x6x6mm, t connector,size 8x8x8mm, t connector,size 10x10x10mm, t connector,size 12x12x12mm, wll24to 2x430501 ,optical sensor, pu tube 10mm and 12 mm, pu tube 8 mm, pu tube 6 mm, pu tube 4 mm, hot air sealing gun baliga and flameproof type, pressure gauge 2inch ,0to 10 kg per cm2 micro, pressure gauge 4inch ,0to 10 kg per cm2 micro, pressure gauge 2inch ,0to 28 kg per cm2 micro, pressure gauge 4inch ,0to 28 kg per cm2 micro, pressure gauge 2inch ,0to 16 kg per cm2 micro, pressure gauge 4inch ,0to 16 kg per cm2 micro, pressure gauge 2inch ,0to 21 kg percm2 micro, pressure gauge 4inch ,0to 21 kg per cm2 micro, pressure gauge 6inch ,0to 21 kg per cm2 micro, pressure gauge 2inch ,0to 42 kg per cm2 micro, pressure gauge 4inch ,0to 42 kg per cm2 micro, temperature gauge 4inch ,0 to 200 degree celsius micro, pressure gauge 6inch ,0 to160 kg per cm2 micro, vacuum gauge 4inch ,0 to760 mm per hg micro, hose parker 2000mm 0.5 inch, hose parker 2000mm 1 inch, hose parker 900mm and 1000mm 0.5 inch, display cuc mark iv, keypad rubber type mkiv, magnetic sensor pneumatic, cap hammering head with white teflon, carousal drive belt anti static, pressure switch flp smart tech, mechanical tool master set,400to 500 pcs include torque wrench ,allen key set ,pliersetc., conveyor c channel, bolt, hex,ms,3inx8mm tvs, load cell 200kg, 5m cable flintec, supporting rod ss 40x400 for gd.pt, cuc card mark iv advanced, cap hammering head with white teflon, carousal drive belt, pressure switch flp, solenoid valve rotex, socket 1 inch thread, socket 0.5 inch thre, hex nipple 1x1 inch and 0.5x0.5 inch, adapter 1x0.75 inch and 0.5x0.375 inch, adapter 1x0.5 inch, adapter 0.5x0.25 inch, stud 30to 32 and 24to 27, stud 21 to 23, belt jockey compressor b72, plug,male transmitter 110703, plug,female transmitter,110704, ucp 209 plumber block ,ntn, brass block for gd.pt machine, sealing cup flameproof straight type, straight fitting 0.375x8 mm, vision unit usb hub,121227, pressure transmitter head, a.d convertor, t connector in gd.pt, pr module controller in carousel mk1v advance vfd, hasm hose pie 1 mtr and 3 mtr, board, part no 130034 pitxe38,qc 1to 91ghz,168201301377
Agency / Dept :
hindustan petroleum corporation limited HPCL
Due Date :
Jun 24, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15763051
Location : unnao , uttar pradesh
Source : GEM Tenders
tender for gd m.c head lower bell , neauprene seal,hydrotesting unit , l bend for filling gun , gd.pt ms sliding bush , screw for pneumatic cylinder , supporting rod ss 40x300 for gd.pt , ss locking bush for clamping rod , pneumatic cylinder shaft 50x160 short thread , pneumatic cylinder shaft 50x160 long thread , v belt a 66,b62,b66 antistatic , pneumatic cylinder norgren.festo 63x25 , lot adopter , plummer block ucp 212 ntn bearing , vibration rubber damper , upper head brass for antennae valve ,norgren , manual sealing gun , antennae valve ,norgren , wd 40 spray , thread locker , 40x400 and 40x400 cylinder guide rail , lens for optical fibre z017400 , coil for metalwork valve , pu seal for gd lower bell , optical fibre cable,sick , push button air valve ,pneumax , spring for centering gun , allen csk bolt 6x50mm,10x30mm ht tvs , chain lock make diamond , pneumatic cylinder shaft 50x80 short thread , roller clamping arm for gd and pt , hot air sealing gun straight type , base of gd ,central section ms , ht bolt 8x40 mm,8x75mm , hexagonal bolt with nut and washer 10x40mm , nut bolt with washer 12 x40 mm , hexagonal bolt with nut and washer 16x75mm , antennae wire , vision unit antennae rod , flameproof sealing unit sensor , yoke plate , clp rd sds drill bit hammer 6x160,12x260,16x350mm , it hss drill p.s 8,10,12 mm , welding electrode 3to 15mm ,manglam , seal kit ck 95 40 , teflon roller with dual bearing , flexible coipling 16x1to 5 ,for introduction unit , pt gun bottom ss head to 6 hole of 8 mm , sensor cable to 1,3,5,7,10mtr , allen csk bolt 0.5x2mm ht tvs , wheel for carousel , welding rod ss to esab make , reflector to white , load cell cable mk 4 , load cell cable to check scale , ss wheel to telescopic boom , mounting for gd cylinder , nylock nut to 6,8 ,10mm , ms anchor fastener 16x150, 12x150 , frl 0.5 inch , pneumatic single pilot valve 2.5 , clamping guide ms block , linear bearing , guide rod ejection unit,introduction unit , conveyor bend teflon , seal kit 50x160 to norgren , elbow connector, size 0.25inchx4mm , elbow connector,size 0.25inchx6mm , elbow connector,size 0.25inchx8mm , elbow connector,size 0.125inchx4mm , elbow connector,size 0.125inchx6mm , elbow connector,size 0.125inchx8mm , elbow connector,size 0.5inchx8mm , elbow connector,size 0.5inchx10mm , elbow connector,size 0.5inchx12mm , reducer,pu, size 6to 4mm,8to 4mm , reducer,pu, size 8to 6mm , reducer,pu, size 10to 8mm , reducer,pu, size 12to 8mm , connector,straight, size 4x4mm,8x8mm , connector,straight, size 6x6mm , connector,straight, size 10x10mm , connector,straight, size 12x12mm , t connector,size 4x4x4mm , t connector,size 6x6x6mm , t connector,size 8x8x8mm , t connector,size 10x10x10mm , t connector,size 12x12x12mm , wll24to 2x430501 ,optical sensor , pu tube 10mm and 12 mm , pu tube 8 mm , pu tube 6 mm , pu tube 4 mm , hot air sealing gun baliga and flameproof type , pressure gauge 2inch ,0to 10 kg per cm2 micro , pressure gauge 4inch ,0to 10 kg per cm2 micro, consumables spares, 8 teeth sprocket with teflon bush, drive unit, pneumatic cylinder 40x400 metalwork flat shaft, 14 teeth sprocket, conveyor, pillow block bearing, drive chain riveted pin, counter weight, chain set, conveyor chain ,riveted type, double stopper set, conveyoyor uhmwear strip, 40x10x2500 mm, taper strip 1850x32x1.625 mm, taper strip 1550x32x1.625 mm, spider l 150, hacksaw blade,hss,12x0.5in ,mirinda, hacksaw frame, electrode, weld,e6013,3.15mm, grinding wheel ag4 packet, cutting wheel ag4 packet, bolt,hex,ms, 1.5inx10mm,2inx10mm, 16mmx4in,1inx4mm,1inx8mm,1.5inx8mm, tipped drill bit,8,10,12mm packet, drill bit,grouting,hss,m10,m12,m16, 10mm,12mm,16mm grouting bolts, cable tie, size 150mm ,200mm, 250mm, 300mm packet, wear strip, soldering iron rod, brass block gdpt, rectangular block gdpt, shaft 60 mm od x 850 mm length, duplex chain 3 mtr, pneumatic cylinder d 40 l 300 metalwork with flat shaft, introduction cylinder d 50 l 450 norgren, clamping cylinder d 50 l 160 norgren, stopper cylinder back mounting norgren, arms set carousel, gas stop valve service kit, wear strip 50x6 mm 50 mtr roll, toggle joint, under cover gi for conveyor, coupling patta, pusher rubber pad,with ss bush, spindle for pt gun,pressure drop, eye bolt for filling machine, pneumatic cylinder 50x80,norgren, piston rod 40x300,hexagon, piston rod 40x400,hexagon, u seal kit hexagon, deadman switch industrial 2.5 0.25inch ,dp055061, wt 24 2x 400 diffuse sensor ,sick, pencil inductive sensor, gd m.c head lower bell, neauprene seal,hydrotesting unit, l bend for filling gun, gd.pt ms sliding bush, screw for pneumatic cylinder, supporting rod ss 40x300 for gd.pt, ss locking bush for clamping rod, pneumatic cylinder shaft 50x160 short thread, pneumatic cylinder shaft 50x160 long thread, v belt a 66,b62,b66 antistatic, pneumatic cylinder norgren.festo 63x25, lot adopter, plummer block ucp 212 ntn bearing, vibration rubber damper, upper head brass for antennae valve ,norgren, manual sealing gun, antennae valve ,norgren, wd 40 spray, thread locker, 40x400 and 40x400 cylinder guide rail, lens for optical fibre z017400, coil for metalwork valve, pu seal for gd lower bell, optical fibre cable,sick, push button air valve ,pneumax, spring for centering gun, allen csk bolt 6x50mm,10x30mm ht tvs, chain lock make diamond, pneumatic cylinder shaft 50x80 short thread, roller clamping arm for gd and pt, hot air sealing gun straight type, base of gd ,central section ms, ht bolt 8x40 mm,8x75mm, hexagonal bolt with nut and washer 10x40mm, nut bolt with washer 12 x40 mm, hexagonal bolt with nut and washer 16x75mm, antennae wire, vision unit antennae rod, flameproof sealing unit sensor, yoke plate, clp rd sds drill bit hammer 6x160,12x260,16x350mm, it hss drill p.s 8,10,12 mm, welding electrode 3to 15mm ,manglam, seal kit ck 95 40, teflon roller with dual bearing, flexible coipling 16x1to 5 ,for introduction unit, pt gun bottom ss head to 6 hole of 8 mm, sensor cable to 1,3,5,7,10mtr, allen csk bolt 0.5x2mm ht tvs, wheel for carousel, welding rod ss to esab make, reflector to white, load cell cable mk 4, load cell cable to check scale, ss wheel to telescopic boom, mounting for gd cylinder, nylock nut to 6,8 ,10mm, ms anchor fastener 16x150, 12x150, frl 0.5 inch, pneumatic single pilot valve 2.5, clamping guide ms block, linear bearing, guide rod ejection unit,introduction unit, conveyor bend teflon, seal kit 50x160 to norgren, elbow connector, size 0.25inchx4mm, elbow connector,size 0.25inchx6mm, elbow connector,size 0.25inchx8mm, elbow connector,size 0.125inchx4mm, elbow connector,size 0.125inchx6mm, elbow connector,size 0.125inchx8mm, elbow connector,size 0.5inchx8mm, elbow connector,size 0.5inchx10mm, elbow connector,size 0.5inchx12mm, reducer,pu, size 6to 4mm,8to 4mm, reducer,pu, size 8to 6mm, reducer,pu, size 10to 8mm, reducer,pu, size 12to 8mm, connector,straight, size 4x4mm,8x8mm, connector,straight, size 6x6mm, connector,straight, size 10x10mm, connector,straight, size 12x12mm, t connector,size 4x4x4mm, t connector,size 6x6x6mm, t connector,size 8x8x8mm, t connector,size 10x10x10mm, t connector,size 12x12x12mm, wll24to 2x430501 ,optical sensor, pu tube 10mm and 12 mm, pu tube 8 mm, pu tube 6 mm, pu tube 4 mm, hot air sealing gun baliga and flameproof type, pressure gauge 2inch ,0to 10 kg per cm2 micro, pressure gauge 4inch ,0to 10 kg per cm2 micro, pressure gauge 2inch ,0to 28 kg per cm2 micro, pressure gauge 4inch ,0to 28 kg per cm2 micro, pressure gauge 2inch ,0to 16 kg per cm2 micro, pressure gauge 4inch ,0to 16 kg per cm2 micro, pressure gauge 2inch ,0to 21 kg percm2 micro, pressure gauge 4inch ,0to 21 kg per cm2 micro, pressure gauge 6inch ,0to 21 kg per cm2 micro, pressure gauge 2inch ,0to 42 kg per cm2 micro, pressure gauge 4inch ,0to 42 kg per cm2 micro, temperature gauge 4inch ,0 to 200 degree celsius micro, pressure gauge 6inch ,0 to160 kg per cm2 micro, vacuum gauge 4inch ,0 to760 mm per hg micro, hose parker 2000mm 0.5 inch, hose parker 2000mm 1 inch, hose parker 900mm and 1000mm 0.5 inch, display cuc mark iv, keypad rubber type mkiv, magnetic sensor pneumatic, cap hammering head with white teflon, carousal drive belt anti static, pressure switch flp smart tech, mechanical tool master set,400to 500 pcs include torque wrench ,allen key set ,pliersetc., conveyor c channel, bolt, hex,ms,3inx8mm tvs, load cell 200kg, 5m cable flintec, supporting rod ss 40x400 for gd.pt, cuc card mark iv advanced, cap hammering head with white teflon, carousal drive belt, pressure switch flp, solenoid valve rotex, socket 1 inch thread, socket 0.5 inch thre, hex nipple 1x1 inch and 0.5x0.5 inch, adapter 1x0.75 inch and 0.5x0.375 inch, adapter 1x0.5 inch, adapter 0.5x0.25 inch, stud 30to 32 and 24to 27, stud 21 to 23, belt jockey compressor b72, plug,male transmitter 110703, plug,female transmitter,110704, ucp 209 plumber block ,ntn, brass block for gd.pt machine, sealing cup flameproof straight type, straight fitting 0.375x8 mm, vision unit usb hub,121227, pressure transmitter head, a.d convertor, t connector in gd.pt, pr module controller in carousel mk1v advance vfd, hasm hose pie 1 mtr and 3 mtr, board, part no 130034 pitxe38,qc 1to 91ghz,168201301377
Agency / Dept :
hindustan petroleum corporation limited HPCL
Due Date :
Jun 22, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16878737
Location : jabalpur , madhya pradesh
Source : GEM Tenders
corrigendum tender for 200 x eoi items of 23mm aa craft sp munt schilka gun zsu 202 key , link , screw driver , sweeping brush , wrench 78110043 cits 15p , screw m58 , wrench for installing the recoil buffer , wrench 3236 , lug 23 gost b1864473 , slide valve , retracting handle , pin 5 p2 2a20 , round pin 8g25 , bush , packing ring 173 , packing ring 103 , packing ring 223 , packing ring 363 , packing ring 413 , trough of zt , reducer assembly , cooling unit assembly , trough bzt , carriage assembly , cable no 73 , handle , output shaft assembly , socket wrench 6 , left hand lower case deflector assembly , recoil buffer right hand assembly , recoil buffer left hand assembly , case for collection of amn belt links , ammunition bo , screw driver 78100310 , tool bag no 2 , appliance to press out plunger , electric motor dv200 , lower left hadn case deflector assembly , upper cradle , compressor kpv18 modification , left hand bo for belt links , right hand bo for belt lilnks , reciver elevation on ppv , drift dia 440 , hydraulic motor no 25 ii ma , pump no 15 with control mechanism red , replenishing tank , control mechanism no 15 , article left hand less barrel assembly , drift dia 14 , contact device bk7 632 m , lever , spring , ball bearing , pusher guide left hand , hammer , funnel with hose , instrument reduction gear assembly , hydraulic motor attachament assembly , upper bracket assembly , trough , screw , tool bag no3 , button nao 360 oil tu , seal casing , tool bag no1 , socket wrench no8 , brush holder , ring b26 , drift dia 2 mm , drift dia 325 , catch , wrench 55 , float assembled , flat brush kshp75 gost 1059765 , elevation inter locking system , cleaning rod brush , wrench 172212119p , front shutter assembly , tumbler pin , tumbler , bearing gasket , pipe union for cleaning , base right hand , control panel 11a3 , packing ring , gasket , firing pin , electric trigger mechanism assembly , breech block , limiter angle , plank , wrench , latch spring , spring washer , hydraulic motor no 5 pm , rubber ring , pipe , collet , left hand ratchet , left hand case cover , rear cartridge stop pin , recoil buffer body , end cup , casing , handle spring , wrench gost 310662 , body , socket wrench 8 , feed block cover left hand feed , support gasket , packing seal , block , cone worm , nipple washer , cap , cover handle , slider , cover block , spring kttb , feed block cover right hand feed , drift dia 4 mm , stand , clamp , insert right hand , device for holding parts , cutter , tommy bar large , cover , receiver , hook assembled , main connecting rod kttb 1a08 , auto safety lever , breech block assembly , collar type packing 2850 , pin for installing locking pawl spring , auto safety pin , output shaft , armature plunger assembled , front shutter latch , cover spring , lever assembly , wire , pipe connection , drift pin dia 3 , bolt m825051 , bolt m816051 , cotter pin 2520001 , nut ms , combination pliers 150 , pressure ring , guiding plate , lubricant chaiatim221 , chain wire rope assembly , cable no 77 assembly , packing ring 9539086 , contact , arm hose , rh case deflector chute lower assembly , ring , back plate , valve spring , frame of slide , socket wrench no17 , socket wrench no27 , drift dia 540 , wrench 12 , nut , bushing , file handle assembled , filling filter , partition , left hand tray , right hand tray , receiver assy left hand , elevation hand wheel assembly , solenoid operated air valve ek48 , winch handle , left hand clamp of bracket assembly , button , wrench 78110319ch 15p , wrench 781103151c1 11 15p , cylinder of squib operated loading , cartrige front latch , rod of latch, 200 x eoi items of 23mm aa craft sp munt schilka gun zsu 202, 23mm aa craft sp munt schilka gun zsu 23, 23mm aa craft sp munt schilka gun zsu 24, 23mm aa craft sp munt schilka gun zsu 25, 23mm aa craft sp munt schilka gun zsu 26, 23mm aa craft sp munt schilka gun zsu 27, 23mm aa craft sp munt schilka gun zsu 28, 23mm aa craft sp munt schilka gun zsu 29, 23mm aa craft sp munt schilka gun zsu 30, 23mm aa craft sp munt schilka gun zsu 31, 23mm aa craft sp munt schilka gun zsu 32, 23mm aa craft sp munt schilka gun zsu 33, 23mm aa craft sp munt schilka gun zsu 34, 23mm aa craft sp munt schilka gun zsu 35, 23mm aa craft sp munt schilka gun zsu 36, 23mm aa craft sp munt schilka gun zsu 37, 23mm aa craft sp munt schilka gun zsu 38, 23mm aa craft sp munt schilka gun zsu 39, 23mm aa craft sp munt schilka gun zsu 40, 23mm aa craft sp munt schilka gun zsu 41, 23mm aa craft sp munt schilka gun zsu 42, 23mm aa craft sp munt schilka gun zsu 43, 23mm aa craft sp munt schilka gun zsu 44, 23mm aa craft sp munt schilka gun zsu 45, 23mm aa craft sp munt schilka gun zsu 46, 23mm aa craft sp munt schilka gun zsu 47, 23mm aa craft sp munt schilka gun zsu 48, 23mm aa craft sp munt schilka gun zsu 49, 23mm aa craft sp munt schilka gun zsu 50, 23mm aa craft sp munt schilka gun zsu 51, 23mm aa craft sp munt schilka gun zsu 52, 23mm aa craft sp munt schilka gun zsu 53, 23mm aa craft sp munt schilka gun zsu 54, 23mm aa craft sp munt schilka gun zsu 55, 23mm aa craft sp munt schilka gun zsu 56, 23mm aa craft sp munt schilka gun zsu 57, 23mm aa craft sp munt schilka gun zsu 58, 23mm aa craft sp munt schilka gun zsu 59, 23mm aa craft sp munt schilka gun zsu 60, 23mm aa craft sp munt schilka gun zsu 61, 23mm aa craft sp munt schilka gun zsu 62, 23mm aa craft sp munt schilka gun zsu 63, 23mm aa craft sp munt schilka gun zsu 64, 23mm aa craft sp munt schilka gun zsu 65, 23mm aa craft sp munt schilka gun zsu 66, 23mm aa craft sp munt schilka gun zsu 67, 23mm aa craft sp munt schilka gun zsu 68, 23mm aa craft sp munt schilka gun zsu 69, 23mm aa craft sp munt schilka gun zsu 70, 23mm aa craft sp munt schilka gun zsu 71, 23mm aa craft sp munt schilka gun zsu 72, 23mm aa craft sp munt schilka gun zsu 73, 23mm aa craft sp munt schilka gun zsu 74, 23mm aa craft sp munt schilka gun zsu 75, 23mm aa craft sp munt schilka gun zsu 76, 23mm aa craft sp munt schilka gun zsu 77, 23mm aa craft sp munt schilka gun zsu 78, 23mm aa craft sp munt schilka gun zsu 79, 23mm aa craft sp munt schilka gun zsu 80, 23mm aa craft sp munt schilka gun zsu 81, 23mm aa craft sp munt schilka gun zsu 82, 23mm aa craft sp munt schilka gun zsu 83, 23mm aa craft sp munt schilka gun zsu 84, 23mm aa craft sp munt schilka gun zsu 85, 23mm aa craft sp munt schilka gun zsu 86, 23mm aa craft sp munt schilka gun zsu 87, 23mm aa craft sp munt schilka gun zsu 88, 23mm aa craft sp munt schilka gun zsu 89, 23mm aa craft sp munt schilka gun zsu 90, 23mm aa craft sp munt schilka gun zsu 91, 23mm aa craft sp munt schilka gun zsu 92, 23mm aa craft sp munt schilka gun zsu 93, 23mm aa craft sp munt schilka gun zsu 94, 23mm aa craft sp munt schilka gun zsu 95, 23mm aa craft sp munt schilka gun zsu 96, 23mm aa craft sp munt schilka gun zsu 97, 23mm aa craft sp munt schilka gun zsu 98, 23mm aa craft sp munt schilka gun zsu 99, 23mm aa craft sp munt schilka gun zsu 100, 23mm aa craft sp munt schilka gun zsu 101, 23mm aa craft sp munt schilka gun zsu 102, 23mm aa craft sp munt schilka gun zsu 103, 23mm aa craft sp munt schilka gun zsu 104, 23mm aa craft sp munt schilka gun zsu 105, 23mm aa craft sp munt schilka gun zsu 106, 23mm aa craft sp munt schilka gun zsu 107, 23mm aa craft sp munt schilka gun zsu 108, 23mm aa craft sp munt schilka gun zsu 109, 23mm aa craft sp munt schilka gun zsu 110, 23mm aa craft sp munt schilka gun zsu 111, 23mm aa craft sp munt schilka gun zsu 112, 23mm aa craft sp munt schilka gun zsu 113, 23mm aa craft sp munt schilka gun zsu 114, 23mm aa craft sp munt schilka gun zsu 115, 23mm aa craft sp munt schilka gun zsu 116, 23mm aa craft sp munt schilka gun zsu 117, 23mm aa craft sp munt schilka gun zsu 118, 23mm aa craft sp munt schilka gun zsu 119, 23mm aa craft sp munt schilka gun zsu 120, 23mm aa craft sp munt schilka gun zsu 121, 23mm aa craft sp munt schilka gun zsu 122, 23mm aa craft sp munt schilka gun zsu 123, 23mm aa craft sp munt schilka gun zsu 124, 23mm aa craft sp munt schilka gun zsu 125, 23mm aa craft sp munt schilka gun zsu 126, 23mm aa craft sp munt schilka gun zsu 127, 23mm aa craft sp munt schilka gun zsu 128, 23mm aa craft sp munt schilka gun zsu 129, 23mm aa craft sp munt schilka gun zsu 130, 23mm aa craft sp munt schilka gun zsu 131, 23mm aa craft sp munt schilka gun zsu 132, 23mm aa craft sp munt schilka gun zsu 133, 23mm aa craft sp munt schilka gun zsu 134, 23mm aa craft sp munt schilka gun zsu 135, 23mm aa craft sp munt schilka gun zsu 136, 23mm aa craft sp munt schilka gun zsu 137, 23mm aa craft sp munt schilka gun zsu 138, 23mm aa craft sp munt schilka gun zsu 139, 23mm aa craft sp munt schilka gun zsu 140, 23mm aa craft sp munt schilka gun zsu 141, 23mm aa craft sp munt schilka gun zsu 142, 23mm aa craft sp munt schilka gun zsu 143, 23mm aa craft sp munt schilka gun zsu 144, 23mm aa craft sp munt schilka gun zsu 145, 23mm aa craft sp munt schilka gun zsu 146, 23mm aa craft sp munt schilka gun zsu 147, 23mm aa craft sp munt schilka gun zsu 148, 23mm aa craft sp munt schilka gun zsu 149, 23mm aa craft sp munt schilka gun zsu 150, 23mm aa craft sp munt schilka gun zsu 151, 23mm aa craft sp munt schilka gun zsu 152, 23mm aa craft sp munt schilka gun zsu 153, 23mm aa craft sp munt schilka gun zsu 154, 23mm aa craft sp munt schilka gun zsu 155, 23mm aa craft sp munt schilka gun zsu 156, 23mm aa craft sp munt schilka gun zsu 157, 23mm aa craft sp munt schilka gun zsu 158, 23mm aa craft sp munt schilka gun zsu 159, 23mm aa craft sp munt schilka gun zsu 160, 23mm aa craft sp munt schilka gun zsu 161, 23mm aa craft sp munt schilka gun zsu 162, 23mm aa craft sp munt schilka gun zsu 163, 23mm aa craft sp munt schilka gun zsu 164, 23mm aa craft sp munt schilka gun zsu 165, 23mm aa craft sp munt schilka gun zsu 166, 23mm aa craft sp munt schilka gun zsu 167, 23mm aa craft sp munt schilka gun zsu 168, 23mm aa craft sp munt schilka gun zsu 169, 23mm aa craft sp munt schilka gun zsu 170, 23mm aa craft sp munt schilka gun zsu 171, 23mm aa craft sp munt schilka gun zsu 172, 23mm aa craft sp munt schilka gun zsu 173, 23mm aa craft sp munt schilka gun zsu 174, 23mm aa craft sp munt schilka gun zsu 175, 23mm aa craft sp munt schilka gun zsu 176, 23mm aa craft sp munt schilka gun zsu 177, 23mm aa craft sp munt schilka gun zsu 178, 23mm aa craft sp munt schilka gun zsu 179, 23mm aa craft sp munt schilka gun zsu 180, 23mm aa craft sp munt schilka gun zsu 181, 23mm aa craft sp munt schilka gun zsu 182, 23mm aa craft sp munt schilka gun zsu 183, 23mm aa craft sp munt schilka gun zsu 184, 23mm aa craft sp munt schilka gun zsu 185, 23mm aa craft sp munt schilka gun zsu 186, 23mm aa craft sp munt schilka gun zsu 187, 23mm aa craft sp munt schilka gun zsu 188, 23mm aa craft sp munt schilka gun zsu 189, 23mm aa craft sp munt schilka gun zsu 190, 23mm aa craft sp munt schilka gun zsu 191, 23mm aa craft sp munt schilka gun zsu 192, 23mm aa craft sp munt schilka gun zsu 193, 23mm aa craft sp munt schilka gun zsu 194, 23mm aa craft sp munt schilka gun zsu 195, 23mm aa craft sp munt schilka gun zsu 196, 23mm aa craft sp munt schilka gun zsu 197, 23mm aa craft sp munt schilka gun zsu 198, 23mm aa craft sp munt schilka gun zsu 199, 23mm aa craft sp munt schilka gun zsu 200, 23mm aa craft sp munt schilka gun zsu 201, 23mm aa craft sp munt schilka gun zsu 202, 23mm aa craft sp munt schilka gun zsu 203, 23mm aa craft sp munt schilka gun zsu 204, 23mm aa craft sp munt schilka gun zsu 205, 23mm aa craft sp munt schilka gun zsu 206, 23mm aa craft sp munt schilka gun zsu 207, 23mm aa craft sp munt schilka gun zsu 208, 23mm aa craft sp munt schilka gun zsu 209, 23mm aa craft sp munt schilka gun zsu 210, 23mm aa craft sp munt schilka gun zsu 211, 23mm aa craft sp munt schilka gun zsu 212, 23mm aa craft sp munt schilka gun zsu 213, 23mm aa craft sp munt schilka gun zsu 214, 23mm aa craft sp munt schilka gun zsu 215, 23mm aa craft sp munt schilka gun zsu 216, 23mm aa craft sp munt schilka gun zsu 217, 23mm aa craft sp munt schilka gun zsu 218, 23mm aa craft sp munt schilka gun zsu 219, 23mm aa craft sp munt schilka gun zsu 220, 23mm aa craft sp munt schilka gun zsu 221, 23mm aa craft sp munt schilka gun zsu 222
Agency / Dept :
indian army
Due Date :
Aug 20, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Pin Pusher. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Pin Pusher sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Pin Pusher Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Pin Pusher, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Pin Pusher Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Pin Pusher Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Pin Pusher.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Pin Pusher depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Pin Pusher Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Pin Pusher bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Pin Pusher. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Pin Pusher, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Pin Pusher, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Pin Pusher?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Pin Pusher tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Pin Pusher?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Pin Pusher, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Pin Pusher is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All