sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

201Latest Ms welding rod Tenders List

Latest Ms welding rod Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Ms welding rod tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Ms welding rod tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Ms welding rod Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Ms welding rod tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Ms welding rod Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Ms welding rod Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Ms welding rod Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Ms welding rod tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Ms welding rod Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Ms welding rod sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Ms welding rod tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Ms welding rod tenders.

Is EMD mandatory for all Ms welding rod tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Ms welding rod work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Ms welding rod tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Ms welding rod Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16989371
Location : dimapur , nagaland
Source : GEM Tenders
NEW TENDER
corrigendum tender for 2 in 1 16 amps flush button type isi marked , surface mounting modular boxes suit for switches 12 module of size 8 inch into 6 inch , surface mounting modular boxes suit for switches 8 module of size 8 inch into 3 inch , combined cover plate with frame inner and outer of 12 module , combined cover plate with frame inner and outer of 8 module , cealing rose with square box 65 into 50mm 2 to 3 terminals , pvc flexible nibbed pipe 20mm dia , mcb db 06 way spn 240 volt conf to is 13032 , mcb 10 amp sp 240 volt breaking capacity 10 ka conf to iec 60898 , mcb 20 amp sp 240 volt breaking capacity 10 ka conf to iec 60898 , mcb 32 amp sp 240 volt breaking capacity 10 ka conf to iec 60898 , pvc casing caping 38mm wide not less than 2 mm thick , pvc coupler for 38mm casing and caping pipe , pvc tee for 38mm casing caping pipe , pvc sockets for 38mm casing caping pipe , pvc corner bend for 38mm casing and caping pipe , pvc elbow for 38mm casing caping pipe , pvc junction linker 75 into 75mm , house service bracket hook type complete with 3 mtr long gi pipe 40mm dia and ms hooks clamps ans stay , pvc conduct pipe 20mm dia isi marked , pvc coupler for 20mm dia coduict pipe , pvc elbow for 20mm dia conduict pipe , pvc space bar saddles for 20mm dia pvc pipe , insulation tape 19mm width 25mm long , no 8 into 19 csk screw full threaded , no 8 into 32 csk screw full threaded , no 8 into 50 csk screw full threaded , no 8 into 75 csk screw full threaded , hand held grinder cutter 125mm dia , bosch grinder cutter blade 125mm dia , portable welding machine arc 220a , plaster 6 inches wooden heavy duty , plaster 8 inches wooden heavy duty , hand gloves for masonery work , spirit level 3 feet , spanner set no 8and 6 to 22mm conf to is , plumbob with kanda 2 mtr thread , iron tasala , iron bucket 15 kg , nylon rope , sintex 500 ltr three layrs pvc make as per ts , brick hammer 5 kg weight , ball pen hammer 1 point 35 kg , ms elect too kit make as per ts , welding rod 60 pcs in one pkt , double wheel concrete troley from ms sheet with 80 to 100 ltr capacity , drilling machine adopter , screw driver set , cutting plier , wire cutter , tester , revit machine , revit 500 nos in pkt , showel , concrete mixer machine 230 ltr with 1 hp 150 to 180 kg capacity make as per ts , water level 30 mtr 8mm pipe for water , store rack as per specification given in appx c of ts , chair writing as per specification given in appx d of ts , writing table as per specification given in appx d of ts , almitrah steel as per specification given in appx d of ts , hand held trolley as per specification given in appx d of ts , hand held fire extinguisher as per specification given in appx d of ts , smoke alarm as per specification given in appx d of ts , heat alarm as per, provision of structure parts and other items for store shelter lamang, shelter parts complete for store shelter, pcc cement is 1489, coarse sand, 20mm aggregates, 40mm aggregates, hardcore 63mm stone aggregates, pcc solid block 400 into 200 into 200mm, chequered cement concrete tiles of size 250 into 250 into 25mm thick, industrial heavy duty full body vitrified ceramic 600 into 600 into 16mm tiles, tmt bars 8mm dia, tmt bar 10mm dia, water proof plywood 8 into 4 feet into 18mm thick, wooden scantling 50mm into 50mm into 3 mtr long, nails assorted size 2 inch 3 inch and 4 inch, binding wire zero point 9mm, white cement, water proofing compound, lime unslaked of best quality, earthing set complete with accessories as per appx i of ts, lc set complete with accessories safe chemicals as per appx i of ts, led battern surface 4 feet long 15 w output 1600 lumens, pixel bulk head fittings led lamp 15 watt, led 12 watt rechargable emergency inverter led bulb complete with inbuilt battery, cealing fan 1200mm with regulator conf to is and with fan hook ms clamps, pvc insulated heavy duty 1100 volt grade cable 6 sqmm twin core aluminium conductor isi marked, porcertain insulating hangers, pvc sheathered unarmoured standrad conductor cable of size 1 sqmm conf to isi marked, pvc sheathered unarmoured standrad conductor cable of size 1 point 5 sqmm conf to isi marked, pvc sheathered unarmoured standrad conductor cable of size 2 point 5 sqmm conf to isi marked, pvc sheathered unarmoured standrad conductor cable of size 4 sqmm conf to isi marked, modular switch piano flush type 6 amps 240 volts single pole one way isi marked, modular switch piano flush type 16 amps 240 volts single pole one way isi marked, modular socket outlet multipurpose 2 in 1 of 6 and 16 amps flush button type isi marked, modular socket outlet multipurpose 2 in 1 16 amps flush button type isi marked, surface mounting modular boxes suit for switches 12 module of size 8 inch into 6 inch, surface mounting modular boxes suit for switches 8 module of size 8 inch into 3 inch, combined cover plate with frame inner and outer of 12 module, combined cover plate with frame inner and outer of 8 module, cealing rose with square box 65 into 50mm 2 to 3 terminals, pvc flexible nibbed pipe 20mm dia, mcb db 06 way spn 240 volt conf to is 13032, mcb 10 amp sp 240 volt breaking capacity 10 ka conf to iec 60898, mcb 20 amp sp 240 volt breaking capacity 10 ka conf to iec 60898, mcb 32 amp sp 240 volt breaking capacity 10 ka conf to iec 60898, pvc casing caping 38mm wide not less than 2 mm thick, pvc coupler for 38mm casing and caping pipe, pvc tee for 38mm casing caping pipe, pvc sockets for 38mm casing caping pipe, pvc corner bend for 38mm casing and caping pipe, pvc elbow for 38mm casing caping pipe, pvc junction linker 75 into 75mm, house service bracket hook type complete with 3 mtr long gi pipe 40mm dia and ms hooks clamps ans stay, pvc conduct pipe 20mm dia isi marked, pvc coupler for 20mm dia coduict pipe, pvc elbow for 20mm dia conduict pipe, pvc space bar saddles for 20mm dia pvc pipe, insulation tape 19mm width 25mm long, no 8 into 19 csk screw full threaded, no 8 into 32 csk screw full threaded, no 8 into 50 csk screw full threaded, no 8 into 75 csk screw full threaded, hand held grinder cutter 125mm dia, bosch grinder cutter blade 125mm dia, portable welding machine arc 220a, plaster 6 inches wooden heavy duty, plaster 8 inches wooden heavy duty, hand gloves for masonery work, spirit level 3 feet, spanner set no 8and 6 to 22mm conf to is, plumbob with kanda 2 mtr thread, iron tasala, iron bucket 15 kg, nylon rope, sintex 500 ltr three layrs pvc make as per ts, brick hammer 5 kg weight, ball pen hammer 1 point 35 kg, ms elect too kit make as per ts, welding rod 60 pcs in one pkt, double wheel concrete troley from ms sheet with 80 to 100 ltr capacity, drilling machine adopter, screw driver set, cutting plier, wire cutter, tester, revit machine, revit 500 nos in pkt, showel, concrete mixer machine 230 ltr with 1 hp 150 to 180 kg capacity make as per ts, water level 30 mtr 8mm pipe for water, store rack as per specification given in appx c of ts, chair writing as per specification given in appx d of ts, writing table as per specification given in appx d of ts, almitrah steel as per specification given in appx d of ts, hand held trolley as per specification given in appx d of ts, hand held fire extinguisher as per specification given in appx d of ts, smoke alarm as per specification given in appx d of ts, heat alarm as per specification given in appx d of ts
Agency / Dept :
indian army
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16922851
Location : baramulla , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for armd welding rod , ms sheet 4mmx8x4ft , elect welding steel , steel angle 45x45x5mm , bond tite, armd welding rod, ms sheet 4mmx8x4ft, elect welding steel, steel angle 45x45x5mm, bond tite
Agency / Dept :
indian army
Due Date :
Sep 03, 2026 (3 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16808729
Location : umiam , meghalaya
Source : GEM Tenders
LIVE TENDER
tender for workshop items - cylinder side casting frame , main gear , pinion gear casting , pedal spacer guide casting , bottom pedal casting , cylinder side bearing house casting , cross casting , connecting rod bearing housing casting , ms casting for fixing the blades , m.s. flat 20 x 3 mm , m.s. flat 30 x 6 mm , m.s. flat 50 x 5 mm , saw blade 2 and half inch size , m.s sheet 4x8 sq.feet 16 gauge , m.s sheet 4x8 sq. feet 18 gauge , m.s sheet 4x8 sq.feet 14 gauge , stainless steel sheet 304 grade 4x8 feet 1.2 mm thickness , ms equal angle 40 x 40 x 5 mm , ms equal angle 25 x 25 x 5 mm , ms equal angle 30 x 30 x 5 mm , ms equal angle 50 x 50 x 5 mm , ms rectangular pipe 3 inch x 1 inch , ms channel 20 mm , black conduit pipe 25 mm outer dia , ms square pipe 1 inch heavy , ms square pipe 2 inch heavy , ms square pipe 1 and one-fourth inch , ms square pipe half inch 15 feet length , plain pipe 25 mm outer diameter , ms rod 8 mm , ms rod 10 mm , ms rod 12 mm , ms square rod 10 mm , ms square rod 8 mm , ms cold roll bright bar 25 mm 20 feet length , ms cold roll bright bar 40 mm 20 feet length , gi nuts and bolts 9 mm diameter and 90 mm length , gi nuts and bolts 6 mm diameter and 45 mm length , gi nuts and bolts 8 mm diameter and 45 mm length , gi nuts and bolts 13 mm diameter and 127 mm length , gi nuts and bolts 10 mm diameter and 85 mm length , m s washer 10 mm inner diameter 25 mm outer diameter , m s washer 8 mm inner diameter 50 mm outer diameter , m s washer 19 mm inner diameter 50 mm outer diameter , m.s rivets 4 mm diameter x 5 mm length flat head , m.s rivets 5 mm diameter x 12 mm length round head , welding electrodes 2.50 mm size , welding electrodes 3.15 mm size , enamel paint mint green , thinner for paint , trolley wheel 8 inch size with 23 mm shaft size , ball bearings 6202 size , ball bearings 6200 size , cut off wheel size 355 x 2.8 x 25.4 mm , cutter grinder wheel 105 x 1.2 x 16 mm , flap disc 60 grit size 100 x 16 mm , grinding disc 105 x 1.2 x 16 mm , coal coke fuel , cotton jute , pillow block bearing p205 id 25 mm diameter , pillow block bearing f205 id 25 mm diameter , rubber dotted for plucker cleaning machine 10 x 2 x 3 cm lxwxh , cycle frame double bar ph type 22 inch size , crank and pedal for cycle 60 teeth with 210 mm diameter , cotter pin lock for crank and pedal 10 mm , 22 teeth sprocket freewheel rear flywheel 34 mm inner diameter , bicycle chain pitch 12.7mm, width 3.17 mm, 8 feet length , stainless steel allen counter sunk screw 6 x 25 mm , stainless steel allen counter sunk nuts 6 mm , stainless steel allen counter sunk washer 6 mm , high speed steel planer blades 90 x 39 x 3 mm , ms heavy duty hatch hinge free swing 37 mm l x 67.5 mm w x 2 mm t , ms hinge 3 inch , chrome finishes ms tower bolt 3 inch size for door , water soluble cutting oil metal working fluid, iso certified , machine oil ep 68 with iso certification , hydraulic oil 68 iso certified , ms taps bsw 1 by 8 inch, 5 by 32 inch, 3 by 16 inch, 1 by 4 inch, 5 by 16 inch, 3 by 8 inch , ms taps metric 9 mm and 10 mm , carbide end mill 8 mm and 10 mm , combination spanner set from 3 mm to 22 mm size , bicycle grip handle , combination plier 7 inch , flat nose plier 6 inch , carbon brush for 4 inch angle grinder, description1, description2, description3, description4, description5, description6, description7, description8, description9, description10, description11, description12, description13, description14, description15, description16, description17, description18, description19, description20, description21, description22, description23, description24, description25, description26, description27, description28, description29, description30, description31, description32, description33, description34, description35, description36, description37, description38, description39, description40, description41, description42, description43, description44, description45, description46, description47, description48, description49, description50, description51, description52, description53, description54, description55, description56, description57, description58, description59, description60, description61, description62, description63, description64, description65, description66, description67, description68, description69, description70, description71, description72, description73, description74, description75, description76, description77, description78, description79, description80, description81, description82, description83, description84, description85
Agency / Dept :
indian council of agricultural research ICAR
Due Date :
Sep 05, 2026 (5 days left)
Tender Value :
19.93L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16922861
Location : bikaner , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for ms round pipe one and half inch , ms square pipe one and half inch , angle iron one by one , welding rod , cutting wheel four , cutting wheel fourteen inch , nut bolt , sealing wire, fabrication of field cook house, ms round pipe one and half inch, ms square pipe one and half inch, angle iron one by one, welding rod, cutting wheel four, cutting wheel fourteen inch, nut bolt, sealing wire
Agency / Dept :
indian army
Due Date :
Sep 03, 2026 (3 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16909295
Location : nashik , maharashtra
LIVE TENDER
auction or scrap of lot no - 01 lot name - scrap mech ferrous ms part including ms scrap plates, product type - metal category - mixed metal scraps scrap mech. ferrous ms part including ms scrap plates,sheets,esp plates, erw pipes, basket sheets, bends, angles,cylinder, channels, rods, rollers, coils, chain, m.s.tanks, m.s.valve,gear wheel pcs, housing, coupling, hub, nozzles, m.s. grills,springs, engine parts,scrap of hard c.i. pipes , bends, nozzle withceramic lining & scrap boiler tubes and coils etc remark:- cutting will be allowed for easy loading from shown location.delivery of scrap material will be started from location (a):-infront of major stores gate. after completion of (a), then location(b):- near shed no 10 of stage i msa custody & location c& d:- | lot no - 02 lot name - scrap conveyor belt more than 2 meters product type - miscellaneous category - rubber scrap conveyor belt more than 2 meters remark:- as is where is basis. location:- stage i custody open yard | lot no - 03 lot name - scrap conveyor belt pieces, rubber pieces product type - miscellaneous category - rubber scrap conveyor belt pieces, rubber pieces etc. (approx wt = 8.910mt) remark:- 1. as is where is basis. location:- stage i custody open yard 2.delivery will be on a lot basis only. | lot no - 04 lot name - aluminium strips, aluminium pieces product type - metal category - aluminium aluminium strips, aluminium pieces, lamp fixures with m.sattached, alluminium cable scrap etc. remark:- as is where is basis. cutting/peeling/ burning is not allowed. location (a) :- shed no 05 of stage-i msa custody location (b) :- open yard of stage-i msa custody | lot no - 05 lot name - scrap of stainless steel buckets,plates product type - metal category - mixed metal scraps scrap of stainless steel buckets,plates, oil gun hose pipes, espelectrodes etc. remark:- as is where is basis. location:- stage i custody open yard | lot no - 06 lot name - empty m s barrels product type - container category - barrel/drum sub category - ms barrel/drum empty m.s. barrels remark:- as is where is basis. location:- behind scrap oil shed | lot no - 07 lot name - scrap of batteries of various capacity product type - electrical items category - battery pcb group - used batteries/lead acid batteries/lead acid cells & lead scrap scrap of batteries of various capacity (approx wt = 1.730 mt) remark:- 1.as is where is basis. cpcb/spcb consent is required. location:- shed no 06 of stage-i msa custody. 2.delivery will be on a lot basis only. | lot no - 08 lot name - ferrous scrap of coal mill grinding rolls product type - miscellaneous category - miscellaneous items ferrous scrap of coal mill grinding rolls of different sizes(qty. 57 nos. having approx wt = 27.850 mt) remark:- as is where is basis. cutting & hammering is not allowed location:- stage i custody open yard | lot no - 09 lot name - electrical mix scrap like contactor product type - electrical items category - others - electrical mix scrap like contactor electrical mix scrap like contactor, fan parts,connector, fan motor,fan blades, relays, wooden/plastic switchboards ,heater coils, falseceiling sheets,foils, fixures with attachment of glass lighting,ms/alumi num/glass attachment,switch gear panels, firefightingpumps, fridge,welding machines with ms attached scrap ofelectrical motors of various type, sizes and capacity etc. (totalapprox wt =16.500 mt) remark:- as is where is basis. cutting/peeling/ burning is not allowed. .location (a) :- shed no 05 of stage-i msa custody & location (b) :- shed no 06 of stage-i msa custody. | lot no - 10 lot name - scrap of e-waste of computer material product type - electronics items category - compters/peripherals pcb group - e- waste-rule 2022 scrap of e-waste of computer material like mouse, keyboards,various types of dot matrix/laser jet printers, scanners, cartiagesand toners, smps, ups, projector, crt tv, cd disks, projectorfilms etc. (approx wt = 4.240 mt) remark:- 1.as is where is basis. cpcb/spcb consent is required. location:- shed no 06 of stage-i msa custody. 2.delivery will be on a lot basis only. | lot no - 11 lot name - ferrous scrap of detoriated g i sheets, m s sheets, m s scrap product type - metal category - mixed metal scraps ferrous scrap of detoriated g.i. sheets, m.s. sheets, m.s. scrappieces, (approx wt. = 66.540 mt) remark:- 1.as is where is basis. location :- near shed no 10 of stage i msa custody 2.delivery will be on a lot basis only. | lot no - 12 lot name - bearing scrap product type - metal category - mixed metal scraps bearing scrap remark:- as is where is basis. location:- shed no 06 of stage-i msa custody | lot no - 13 lot name - scrap of empty plastic barrels product type - container category - barrel/drum sub category - plastic barrel/drum scrap of empty plastic barrels (capacity = 210 ltr) = 230 nos & scrap empty small plastic barrels (capacity =50 ltr) = 700 nos remark:- as is where is basis. location:- 1.as is where is basis. location (a) :- shed no 05 of stage-i msa custody & location (b) :- shed no 02 of stage-i msa custody 2.delivery will be on a lot basis only. | lot no - 14 lot name - scrap of bull ring segment product type - metal category - mixed metal scraps scrap of bull ring segment remark:- as is where is basis. location:- shed no 01 of stage-i msa custody | lot no - 15 lot name - scrap of tyres of various sizes product type - miscellaneous category - rubber scrap of tyres of various sizes of heavy & light vehiclesbig -05 nos ,medium - 12 nos & smal.-11 nos remark:- 1.as is where is basis. location:- oil shed of stage-i msa custody 2.delivery will be on a lot basis only. | lot no - 16 lot name - scrap of brass wheel product type - metal category - brass scrap of brass wheel (approx wt. = 2.100 mt) remark:- 1.as is where is basis. location:- shed no 05 of stage-i msa custody 2.delivery will be on a lot basis only. | lot no - 17 lot name - copper cable scrap product type - metal category - copper copper cable scrap remark:- 1.as is where is basis. location:- as is where is basis. location:- shed no 05 of stage-i msa custody | lot no - 18 lot name - scrap of polymar plastic rollers product type - miscellaneous category - plastic scrap of polymar plastic rollers with ms shaft and its pieces etc. remark:- as is where is basis. | lot no - 19 lot name - scrap of geyser tanks product type - metal category - mixed metal scraps scrap of geyser tanks in various sizes (approx wt.= 0.990 mt,qty = 80.000 nos) scrap of radiator, cooler with ms attached(approx wt.= 1.950 mt,) remark:- 1.as is where is basis location:- (a) shed no 06 of stage-i msa custody location:- (a) shed no 05 of stage-i msa custody 2.delivery will be on a lot basis only. | lot no - 20 lot name - scrap of air-heater baskets product type - electrical items category - others - scrap of air-heater baskets scrap of air- heater baskets (approx wt. = 10.000 mt) remark:- 1.as is where is basis. location:- stage i custody open yard 2.delivery will be on a lot basis only. | lot no - 21 lot name - railway m s scrap product type - metal category - mixed metal scraps railway m.s.scrap remark:- as is where is basis. location:- stage i custody open yard | lot no - 22 lot name - various type of used lub oil product type - petroleum products category - used/ waste oil pcb group - used spent/burnt oil/used lube oil/used engine oil lot of various type of used lub oil approximate 20000 ltr in 100nos. of barrels remark:- 1.as is where is basis. cpcb/spcb consent is required. location (a) :- scrap oil shed 2.delivery will be on a lot basis only.
Agency / Dept :
mstc limited metal scrap trade corporation limited
Due Date :
Sep 03, 2026 (3 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16813008
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
LIVE TENDER
tender for almirah large with shelves steel , book case small , charpoy ip with hard top , locker bed side steel , rack adjustable 6 tier steel , table dressing gents with mirror , table dressing ladies with mirror , table dining 4 person , table writing med , teapoy wooden , hat stand with mirror , sofa set 5 seater , chair computer , rack shoe steel , table bed side , bin solied linen multi purpose, special repair surveyed off condemned furniture for the qe jun 2025 under ge minniebay, dimension overall size shall be 1985mm high comma 920mm wide and 485mm deep. description the base shall be made of two numbers mild steel sheet channel bases made in u shaped with ends covered. mild steel sheet shall be 1mm thick. the base channel shall be welded at 50mm from each end of the length of 920mm and shall be up to full width of 485mm and shall be 100mm high top comma sides bottom and back of almirah shall be of 1mm thick mild steel sheet. four shelves equally spaced of 1mm thick mild steel sheet shall be provided to make five compartments. front shutter shall two leaves of equal size. front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung. all joints and welding and fixing shall be done in accordance with the standard workmanship. handle one chromium plated steel handle with a locking device shall be provided as shown on drawing. locking device the locking device shall be three way locking device and shall also be provided with decorative key plate. finish all steel surfaces shall be painted with two coats of smoke grey paint internally and extrenally with spray machine over a coat of red oxide primer after preparation of surfaces. a mark of mes shall also be provided on top left corner of front shutter with visible colour. painting shall be done with spray machine. rest all as per drg., overall size shall be 1025mm long comma 450mm wide and 750mm high. back shall be 1025 mm long and 750 mm high made out of prelaminated hdf board bd 18mm thick one side teak comma walnut and other side balancing white comma rest all as per drg and as directed by engr in charge., overall size shall be 1980mm long comma 900mm wide and 440mm high. two long rails and two short rails shall be of 25mmx65mmx16 gauge ms rectangular pipe. the legs shall be of size 32mmx32mmx16 gauge welded to long and short rails as shown on drg.two stiffeners of size 25mmx25mmx16 gauge shall be provided in equidistant between two opposite long rails. six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. two stiffeners joining legs of size 25mmx25mmx16 gauge shall be provided at 150mm from ground level. 12mm thick bwr plywood shall be provided for top as shown on drg with proper nut and bolt .one nut and bolt shall also be provided at centre of each stiffeners for fixing the plywood irrespective of what is shown on drg. pvc hard rubber shoes shall be fixed at bottom of each leg. all steel surfaces shall be painted with synthetic enamel paint black in color after applying a coat of primer. rest all as per drg, dimension overall size shall be 760mm long comma 600mm wide and 1100mm high. description the locker shall be made of mild steel sheet 1mm thick. 20 mm dia conduit pipe shall be chrome plated with wall thickness of 1 point 6 mm shall be fixed with side sockets. two handles chromium plated 100mm long shall be fixed to shutters with necessary riveting. one hasp and staple 75mm long shall also be fixed to shutters with riveting. the left shutters shall be provided with 100mm long tower bolt inside at upper and lower ends also. the locker shall be provided with compartments as shown in drgs made of 1mm ms sheet. finish all steel surface internally and externally comma exposed to view when placed in position shall be given two coats of smoke grey paint internally and externally after properly smoothened the surface with sand paper and applying putty. painting shall be done with spray machine. rest all specifications are as per drg., dimension overall size shall be 915mm long comma 610mm wide and 1905mm high. description the entire rack shall be made of 1mm mild steel sheet. the sides shall be provided with 40x40x4mm angle iron welded to 1 point 00mm thick ms sheet. 75x75x3mm thick flat iron cut to shape shall be welded at front corner. all partitions shall also be made of 1mm thick mild steel sheet and shall be riveted to side of rack. all dimensions comma shape and size shall be followed as per drg. all joints comma fixing shallbe done in accordance with standard specifications. rest all as shown on drg. finish all steel surfaces exposed to view when placed in position shall be painted with two coats of smoke grey hammer paint internally and extrenally with spray machine after preparation of surfaces. painting shall be done with spray machine. rest all as per drg., all as per drg comma the frame shall be strictly as per drg wallet oblique teak colour as approved. the mirror shall be of 5mm thickness of make modiguard oblique saint gobain all shown on drg and as directed by engr in charge., the overall size of the table dressing shall be 1150mm long 380mm wide and 1700mm high. the sides comma top comma back and front of the base unit shall be of 18mm thick prelaminated mdf board. the bottom of the side units shall be of 12mm thick mdf board. the sides and back of drawers shall be of 12mm thick prelaminated mdf comma bottom of the drawers shall be of 6mm thick commercial ply whereas the front of the drawers shall be of 18mm thick prelaminated mdf board. 5mm thick electro copper plated mirror shall be fixed over 6mm thick plywood back. track rails 25mm x 25mm in section on one side telescopic channel of make hettick oblique ebbco comma on two vertical. the overall size of the stool shall be 440mm long 350mm wide and 425mm high. the four sides shall be of 18mm thick prelaminated mdf. the top of the stool shall be of 12mm thick plywood openable as shown in drg. four heavy duty revolving nylon double wheels shall be provided at base below the 6mm base ply fixed over wooden runner 20 mm x 20 mm. the seat of the stool shall be 75mm high comma made of foam 40 density covered with tapestry cloth as approved by engr in charge oblique ge. rest all as per drg., all as per drg comma the wood shall be 1st class hard wood teak free from any joints cracks and knots. the top shall be made out of 18mm thick mdf board exterior grade one side teak lamination in wange oblique wallet as approved colour and one side white lamination. all exposed edges of ppb shall be provided wooden beading of teak wood 4mm thick x 18mm wide duly polished with matching colour the frame shall be polished after prepration of surfaces with two or more coats of brown oblique walnut colour melamyne polish with spray machine as per the requirement to its glossy look. rest all as shown on drg and as directed by engr in charge., dimension overall size shall be 1145mm long comma 600mm wide and 760mm high. description all wood shall be of first class hard teak wood except top and right hand side drawer cabinet. legs shall be of 35mmx55mm in section and 717mm high having 5mmx5mm in section groove at the top of legs at the portion when placed in position. the top shall be of 18mm thick of approved shade and the edges shall be covered with 4mm thick teak wood beading. two short stiffeners of teak wood of size 50mmx40mm in section irrespective of what is shown on drg shall be provided between legs at 100mm from bottom of legs. sides of the box which house the drawer and cabinet shall be 18mm thick bwr grade plywood sides and back of drawers shall be of 12mm thick teak wood planks. bottom of drawers shall be of 6 mm thick plywood commercial. 6mm thick plywood commercial 75mm high partition shall be provided in the drawer. shutter for cabinet shall be fixed with piano type continuous hinges. lock shall be provided to drawer and shutters. recessed handle shall be provided to drawer and shutter. 25mm dia and 25mm high rubber shoes shall be fixed to bottom of legs. finish all wood surfaces shall be melamyne polished with high gloss finishby spray machine. rest all as per drg., dimension the overall size shall be 600mm long comma 450mm wide and 540mm high. description the legs shall be 60mmx30mm in section and 497 mm high and shall be of teak wood. 5mmx5mm in section groove shall be provided at the visible portion of top of legs. top rails of teak wood of 20mmx50mm in section and 510mm long shall be provided between the legs. bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. a centre rail of size 20mmx50mm shall also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg. 25mm thick and 25mm dia hard rubber oblique pvc rings shall be fixed to the bottom of all legs fixed with 30mm long screws. top of table shall be of 18 mm thick pre laminated mdf board with 4mm teak wood edging alround the top of table. finish all wood surfaces shall be melamyne polished with high gloss finish by spray machine. rest all as per drg, overall size shall be 1330 mm long comm 710mm high. the inner frame shall be of 50mmx20mm teak wood battens six in nos. the back and front of frame shall be covered with 6mm thick commercial ply. the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive. six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg. 5mm thick looking mirror of saint gobian comma modiguard oblique atul shall be provided as shown on drg with beading alround. mild steel key plate shall be provided at both top corners of the hat stand. all exposed surfaces shall be given high gloss melamyne polish with lacquer spray machine finish. rest all as per drgs, all as per drg comma the timber in all around shall be first class hard wood teak comma the cushions shall be made out of pu foam of min 40 density of approved make and covered with tapestery cloth of approved quality comma pattern and colour before incorporating in work. the frame shall be polished after prepration of surfaces with two or more coats of brown oblique walnut colour melamyne polish with spray machine as per the requirement to its glossy look rest all as shown on drg and as directed by engr in charge., the base pedestal assembly of chair computer shall be of dia 700mm and 1060mm high. the pedestal assembly shall be provided with injection molded in black 30 percentage glass filled nylon. a 10 point 5mm dia forged bright zinc plated ms castor pin is of press fitted into each prong for holding the castors. the seat and back of the chair computer shall be made of 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. the back form shall be designed with contour lumber support for extra comfort with pvc lipping allround. the back rest shall be adjustable and consist of drop lift mechanism and shall be adjusted in the insert. it shall be scratch and weather resistant. rest all as per sample and as approved by ge, overall size shall be 700mm long comma 300mm wide and 880mm high. the legs of the shoe rack shall be of 25mm dia ms pipe of 18 gauge. the five shelves of the rack shall be of 20mm dia ms pipe of 18 gauge welded to legs. the shelves shall have 3mm dia ms rod 9 nos in widthwise and 3 nos in lengthwise welded to 20mm dia shelf frame. pre treated with powder coated oven baked with black colour., the overall size of the table bed side shall be 450mm x 450mm x 600mm from rear and 450mm x 450mm x 500mm from front as shown in drg. the entire frame of table bed side shall be made up of 18mm ms square pipe 18 gauge duly black powder coated. the two sides and top shall be made up of 18mm thick mdf board exterior grade. the back of the table except the top portion as shown in drg shall be provided with 6mm commercial plywood bwr grade duly screwed to frame. the two sides comma back and bottom of drawers of the table shall be made up of 12mm thick mdf board irrespective of what is shown on drg comma except the front side which shall be of 18mm thick mdf board exterior grade. the drawers shall be made functional by using telescopic channel of appropriate size shall be used for smaooth mvement of drawer.the drawers of the tables shall be provided with 100mm long cp handles. rest all as per drg. the lower portion of the bed side table should be box type provided with one shutter of appropriate size duly fixed with piano type hinges comma one cp handle of 4 inch size and one magnetic catcher should also be provided. rest all as shown on drawing and as directed by engr in charge., overall size shall be of 1000mm long comma 380mm wide and 760mm high. bottom rest shall be made of 19mm thick mdf board and shall be 900mm long and 280mm wide and 75mm hih joined together in long and short sides. multipurpose bin linen shall be placed over it. the bin shall be 1000mm long comma 380mm wide and 385mm high. back side shall be of 19mm thick mdf board 1000mm long and 685mm high. sides shall be of 19mm thick mdf board 380mm wide and 685mm high. top and bottom shall be of 19mm thick mdf board 1000mm long and 380mm wide. a vertical partition shall be provided at 400mm from inner face of left hand side which shall be of 19mm thick mdf. a shelf shall be provided in the middle of left portion which shall be of 19mm thick mdf board and shall remain uncovered. two drawers and a cupboard shall be provided on the right hand side. of the bin. bottom comma sides comma back and front of drawers shall be of 12mm thick mdf board. the partition between the drawers shall be of 19mm thick mdf board. front shutter of cupboard shall be hinged with continuous piano type hing and shall be side hung. the shutter shall have eight vertical slots of 19mm width and 180mm high with gap of 19mm made in the center of the shutter. the shutter shall be provided with 100mm long mild steel powder coated handle and ball spring catch as shown on drawing. 19mm thick mdf board 543 mm long and 40mm wide shall be provided as base support in the front under the drawers. teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers. teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers on the outer sides in such a way that it rns smoothly over the beares fixed on the the sides of the partitions of the bin.
Agency / Dept :
indian army
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
23.73L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16724861
Location : varanasi , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for cement , sand , aggregate , brick , iron rod , ms equal angle , plywood , ms plain sheet , welding rod , rcc pipe, eleven bn ndrf makbul alam road choka ghat varanasi, cement, sand, aggregate, brick, iron rod, ms equal angle, plywood, ms plain sheet, welding rod, rcc pipe
Agency / Dept :
national disaster response force NDRF
Due Date :
Sep 02, 2026 (2 days left)
Tender Value :
7.48L
View Documents
T18 Ref No : 16725920
Location : new delhi , delhi
Source : GEM Tenders
LIVE TENDER
tender for welding rod 3 point 15mm ms pkt of 2 point 5 kgs mangalam , white paint burger , black paint burger , cutting wheel grinder 5 inch bosch , insulation tape 30mtr steel grip pvc elect , 3 pin plug 5amp anchor , 3 pin socket 5amp anchor , teflon tape ptef half inch 10 mtr roll , 100watt bulb philips incandescent , single core copper wire 1sqmm polycab , 2 point 5 sqmm 3 core wire polycab , 2 inch paint brush camlin, welding rod 3 point 15mm ms pkt of 2 point 5 kgs mangalam, white paint burger, black paint burger, cutting wheel grinder 5 inch bosch, insulation tape 30mtr steel grip pvc elect, 3 pin plug 5amp anchor, 3 pin socket 5amp anchor, teflon tape ptef half inch 10 mtr roll, 100watt bulb philips incandescent, single core copper wire 1sqmm polycab, 2 point 5 sqmm 3 core wire polycab, 2 inch paint brush camlin
Agency / Dept :
indian army
Due Date :
Sep 26, 2026 (26 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16954776
Location : gangtok , sikkim
Source : GEM Tenders
LIVE TENDER
tender for armourd welding rod , ply wood for general purposes mr ab 3pl , leather cloth black , paint rfu white , steel angles 50 x 50 x 5 mm , steel angles 25 x 25 x 3 mm , steel bar alloy hot rolled flat 30 x 6 mm , steel bar carbon hot rolled mild round bright 3 ablique 4 inch , steel bar alloy hot rolled flat 75 x 10m , steel angles 45 x 45 x 5 mm , steel angles 20 x 20 x 3 mm , sunmica , leather cloth white , ms steel sheet , wire iron jali , cable power electrical copper conductor 70 sq mm , insulation tape electrical pvc adhesive , blade hack saw hand flexible fine nomina , washer banjo 19mm , washer banjo 18mm , washer banjo 17mm, armourd welding rod, ply wood for general purposes mr ab 3pl, leather cloth black, paint rfu white, steel angles 50 x 50 x 5 mm, steel angles 25 x 25 x 3 mm, steel bar alloy hot rolled flat 30 x 6 mm, steel bar carbon hot rolled mild round bright 3 ablique 4 inch, steel bar alloy hot rolled flat 75 x 10m, steel angles 45 x 45 x 5 mm, steel angles 20 x 20 x 3 mm, sunmica, leather cloth white, ms steel sheet, wire iron jali, cable power electrical copper conductor 70 sq mm, insulation tape electrical pvc adhesive, blade hack saw hand flexible fine nomina, washer banjo 19mm, washer banjo 18mm, washer banjo 17mm
Agency / Dept :
indian army
Due Date :
Sep 04, 2026 (4 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16933221
Location : okhamandal , gujarat
Source : GEM Tenders
LIVE TENDER
tender for procurement of paints and general items - welding rod 3.15 mm , welding rod 4.00 mm , gas cutting nozzle 0.0625 inch d s , gas cutting nozzle 0.125inch d s , flash back arrester oxygen and acetylene to fitted on cutting torch. , flash back arrester to fitted on cylinder oxygen and acetylene , cylinder key , gas lighter , nozzle cleaner , welding glass plain , welding glass black , lighter stone , hack saw blade , petroleum jelly , lug 2.5 sq mm ring type 30 no in 1 pkt , lug 2.5 sq mm fork type 30 no in 1 pkt , lug 4-6 sq mm ring type 30 no in 1 pkt , lug 4-6 sq mm fork type 30 no in 1 pkt , 2 core cable, 2.5 sq mm , assorted size sleeve , ss nut bolt 6mm , m.s angle 50x50x6 mm , m.s angle 75x75x10 mm , m.s. plate 6 mm , ss nut and bolts and washer 18x75mm , s s nut and bolts and washer18x50mm , s s nut and bolts and washer 12x70mm , s s nut and bolts and washer18x70mm , s s nut and bolts and washer 16x70 mm , s s nut and bolts and washer14x50mm , s s nut and bolts and washer14x70mm , s.s nut andbolts and washer12x50mm , ms nut and bolts 12x50mm , s.s nut and bolts and washer 8x25mm , high carbon steel stud 25 x 180mm with double washer and four nuts , wooden planks 4inchx10mm x7feet , wooden planks 4inchx10mmx4feet , lead , sealant , cocking gun , insulation tape , cutting torch , rustoline glass cleaner , safety goggles , welding holder , locking clip , reinforced flexible pipe 35 mm 90 meter rol , hose pipe blue and red 30 meter roll , double stage 2 gauge regulator for oxygen , double stage 2 gauge regulator for acetyline , cable tie cv 100 30 no in 1 pkt , cable tie cv 150 30 no in 1 pkt , cable tie cv 200 30 no in 1 pkt , cable tie cv 300 30 no in 1 pkt , hss dril set 5 to 12 mm , cutting wheel 4inch , chalk stick ,plier , glass cleaner 500ml , maker pen , wire striper , side cutter , yellow duster , welding helmet , 2400w 355mm dia metal cutting machine , hand grinding machine 100mm disc , digital vernier caliper , epoxy golden yellow paint , epoxy black paint , epoxy white paint , synthetic white enamel , epoxy green paint , epoxy red paint , primer , general purpose thinner , epoxy thinner , black bituminous , antifouling red
Agency / Dept :
department of lighthouses and lightships DGLL
Due Date :
Sep 11, 2026 (11 days left)
Tender Value :
12.76L
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Ms Welding Rod. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Ms Welding Rod sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Ms Welding Rod Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Ms Welding Rod, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Ms Welding Rod Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Ms Welding Rod Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Ms Welding Rod.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Ms Welding Rod depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Ms Welding Rod Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Ms Welding Rod bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Ms Welding Rod. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Ms Welding Rod, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Ms Welding Rod, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Ms Welding Rod?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Ms Welding Rod tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Ms Welding Rod?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Ms Welding Rod, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Ms Welding Rod is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All