sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

19Latest Male branch tee Tenders List

Latest Male branch tee Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Male branch tee tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Male branch tee tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Male branch tee Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Male branch tee tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Male branch tee Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Male branch tee Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Male branch tee Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Male branch tee tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Male branch tee Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Male branch tee sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Male branch tee tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Male branch tee tenders.

Is EMD mandatory for all Male branch tee tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Male branch tee work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Male branch tee tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Male branch tee Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17447661
Location : liluah , west bengal
LIVE TENDER
tender for ss tubes and double ferrule for brake piping arrangement, one set of ss tubes and double ferrule for brake piping arrangement of lhb bogie as per ic f specification no. icf/md/spec-166 issue status- 01, rev. 04, amd-01 & 02 consisting of (1) bulk head mal e elbow (with conical seating) 3/4 od x m26 x 1.5 to drg. no. icf/std 3-5-113, alt. c, item-01, qty/set= 03 nos. (2) bulk head elbow 3/4 od to drg. no. icf/std-3-5-117, alt. b, item- 1, qty/set= 01 no. (3) male elbo w (with conical seating) 1/2 bspt (m) x m26x 1.5 (m) to drg. no. icf/std 3-5-115, alt. nil, item - 01, qty/se t= 04 nos. (4) special adaptor 1/2 bsp (m) x 1/2 bsp(f) to drg. no. icf/std 3-5-116, alt. c , item- 1, qty/s et= 04 nos. (5) male branch tee union (with conical seating ) 3/4 od x m26x 1.5 (m) to drg. no. icf/std 3 -5-132, alt. nil, item no. 1, qty/set=01 no. (6) bulk head swivel union 3/4 od to drg. no. icf/std 3-5-133, alt. nil, item 01 qty/set= 02 nos. (7)union tee 3/4 od to drg. no. icf/std - 3-5-018, alt. b, item - 2, qty/se t= 01 no., (8) bulk head male connector (with conical seating) 3/4 odx m26x 1.5 (m) to drg. no. lwscws e-3-2-005, alt. nil, item -01, qty/set= 02 nos., (9) ss seamless pipe 3/4 od x 6000 millimeter , astm a269 , gr.tp 304 to icf /md /spec-166 issue status-01, rev. 04, amendment- 01 & 02, qty/set= 01 no. - warra nty period: 48 months after the date of delivery
Agency / Dept :
eastern railway ER
Due Date :
Oct 26, 2026 (11 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17682035
Location : bangalore , karnataka
Source : GEM Tenders
LIVE TENDER
tender for 52460402 , 52460403 , 52460404 , 52460405 , 52460407 , 52460408 , 52460410 , 52460412 , 52460414 , 52460415 , 52460416 , 52460417 , 52460418 , 52460419 , 52460420 , 52460422 , 52460423 , 52460498 , 52460424 , 52460425 , 52460428 , 52460429 , 52460430 , 52460431 , 52460432 , 52460433 , 52460434 , 52460435 , 52460437 , 52460438 , 52460440 , 52460441 , 52460444 , 52460445 , 52460447 , 52460448 , 52460449 , 52460451 , 52460453 , 52460455 , 52460456 , 52460457 , 52460458 , 52460459 , 52460460 , 52460461 , 52460462 , 52460463 , 52460464 , 52460465 , 52460466 , 52460467 , 52460468 , 52460469 , 52460470 , 52460471 , 52460472 , 52460473 , 52460476 , 52460477 , 52460478 , 52460479 , 52460480 , 52460481 , 52460483 , 52460484 , 52460485 , 52460486 , 52460487 , 52460488 , 52460489 , 52460490 , 52460491 , 52460492 , 52460493 , 52460494 , 52460495 , 52460496 , 52460454, supply of brake end fittings, adaptor m26xg1, adaptor m16xg1, adaptor, adjustable adaptor drain, male connector, adjustable elbow with adapter, adjustable elbow with adaptor male, adjustable elbow with adaptor male g1xd10, adjustable elbow with adaptor male g1xd18, adjustable elbow with adaptor male g1xd22, adjustable elbow with adaptor male g1xd42, adjustable elbow with adaptor male g2xd22, adjustable elbow with adaptor male m12xd10, adjustable elbow with male adaptor m28xg1, male connector g1xd10, bulk head union d10, choke fitting elbow, choke male connector, copper gasket, elbow hose bulkhead m16xd10, elbow hose bulkhead m26xd18, female branch tee, female connector, female run, gauge adaptor, male conenctor d10xm14, male connector g1xd22, male connector m16xd10, male connector g1xd18, male connector m26xm36x2, male connector m36xd22, male connector m22xd18, plug g1, reducer, reducing tee, male connector d10xm22, female run tee, reducing tee d10 x d10 x d18, reducing tee d18 x d10 x d18, reducing tee d18xd18x10, reducing tee d22 x d22 x d18, reducing tee d22xd10xd22, reducing tee d22xd18xd22, female connector, reducing tee female, reducing union d18xd10, straight union d10, straight union d18, straight union d22, straight union dia 8, reducing union d18xd15, tee female, union bulk head female, male male connector g1xm26, union elbow d10, union elbow d18, union elbow d22, union tee d10, union tee d18, union tee d22, bulk head union d18, bulkhead elbow d18, hose bulk head elbow m14xd10, plug, male connector m26xd22
Agency / Dept :
bharat earth movers limited BEML
Due Date :
Oct 19, 2026 (4 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17736730
Location : bishnupur , manipur
Source : GEM Tenders
LIVE TENDER
corrigendum tender for sediment filter for kent grand plus , sediment filter for kent elite-ii ro , sediment filter for kent elite-i , carbon filter for kent grand plus , activated carbon filter for kent elite-ii ro , activated carbon filter for kent elite -i ro , ro membrane for kent ro , ro membrane for kent elite-ii , uf membrane for kent elite-ii ro , uf membranes for kent ro , frt for kent grand,grand plus,pearl , frt for kent elite - i,kent elite-ii ro , prefilter cartridge for kent grand plus , prefilter housing for kent ro , pump for kent grand,grand plus,pearl ros , pump for elite-ii,elite-i ros , cc ballast kent grand,kent grand plus,kent pearl,kent elite-i 25lph , cc ballast kent elite-ii 50lph , uv tube for kent ro , uv assembly for kent ro , smps for kent grand,grand plus,pearl ros , smps for kent elite-ii,elite-i ros , tap for kent grand,grand plus,pearl ros , one-fourth plastic pipe for kent ro small dia , three-eighths plastic pipe for kent ro big dia , ss ball valve connector for kent ro , 3 way kent ro connector , post carbon blue alkaline , male elbow,three - eigths inch pipe x one- fourth inch thread , male elbow,three - eigths inch pipe x three - eigths inch thread , stem branch tee,one-fourth inch pipe xone-fourth inch , stem elbow,one-fourth inch pipe xone-fourth inch , elbow pl0404 forone-fourth inch pipe , male elbow plw0404 for one-fourth inch pipe x one- fourth inch thread , tee pt040404 for one-fourth inch pipe , nrv pv3l0404, procurement of spare parts of kent ro various models, sediment filter for kent grand plus, sediment filter for kent elite-ii ro, sediment filter for kent elite-i, carbon filter for kent grand plus, activated carbon filter for kent elite-ii ro, activated carbon filter for kent elite -i ro, ro membrane for kent ro, ro membrane for kent elite-ii, uf membrane for kent elite-ii ro, uf membranes for kent ro, frt for kent grand,grand plus,pearl, frt for kent elite -i,kent elite-ii ro, prefilter cartridge for kent grand plus, prefilter housing for kent ro, pump for kent grand,grand plus,pearl ros, pump for elite-ii,elite-i ros, cc ballast kent grand,kent grand plus,kent pearl,kent elite-i 25lph, cc ballast kent elite-ii 50lph, uv tube for kent ro, uv assembly for kent ro, smps for kent grand,grand plus,pearl ros, smps for kent elite-ii,elite-i ros, tap for kent grand,grand plus,pearl ros, one-fourth plastic pipe for kent ro (small dia), three-eighths plastic pipe for kent ro (big dia), ss ball valve connector for kent ro, 3 way kent ro connector, post carbon blue alkaline, male elbow,three - eigths inch pipe x one- fourth inch thread, male elbow,three - eigths inch pipe x three - eigths inch thread, stem branch tee,one-fourth inch pipe xone-fourth inch, stem elbow,one-fourth inch pipe xone-fourth inch, elbow pl0404 forone-fourth inch pipe, male elbow plw0404 for one-fourth inch pipe x one-fourth inch thread, tee pt040404 for one-fourth inch pipe, nrv pv3l0404
Agency / Dept :
national hydroelectric power corporation limited nhpc limited
Due Date :
Oct 19, 2026 (4 days left)
Tender Value :
7.08L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17520397
Location : lucknow , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for main fire pump , diesel driven pump , jockey pump , terrace pump , control panel , starter , m s pipe , s and fixing internal hydrant valve , supply and fixing of external yard hydrant valve , sfc of butterfly valve , s and fixing of orifice plate , pitc non return valve , pitc of stainless steel y strainer , s and fixing of 15 m hose pipe , s and fixing first aid hose reel , s and fixing 63 mm dia gun metal short branch pipe , s and fixing of fire brigade connection , foot valve , air vessel , pressure switch , pressure gauge , installation control valve of cast iron body , s and f of hose cabinet , cutting holes , supply of cable , laying of cable , s and m end termination , s and f fire cable , cable tray , g i plate earthing , p and f gi strip , gi strip for looping , p and f gi earth wire , p and f gi pipe, supply installation testing and commissioning of firefighting with wet riser system, sh 1 wet riser system main fire pump a supplying, installation, testing and commissioning of electric driven main fire pump conforming to is 12469 2019 suitable for automatic peration and consisting of following complete in all respects as required. b horizontal type multistage centrifugal split casing pump of cast iron body and bronze impeller with stainless steel shaft fire pump capable for delivery of 2280 lpm against atotal head of 70 mtrs approximately while running at 1450 1500 rpm mechanical seal as required bsnl approved make. c suitable hp squirrel cage induction motor tefc synchronous speed 1500 rpm suitable for operation on 415 volts 3 phase 50 hz ac supply with ip 55 protection for enclosure horizontal foot mounted type with class. f insulation conforming to is 12615 2018. d m.s. fabricated common base plate coupling,coupling guard, foundation bolts etc. as required. e suitable cement concrete foundation duly plastered with anti vibration pads note the head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point. the pump room is situated on the underground water tank. 2280 lpm at 70 m head, diesel driven pump a supplying, installation, testing and commissioning of die sel engine driven main fire pump conforming to is 12469 019 suitable for automatic operation and consisting of following, complete in all respects, as required diesel driven pump b horizontal pe, stage, centrifugal pump of cast of iron body and bronze peller with stainless steel shaft, mechanical seal suitable to delivering 2280 lpm against atoatl head of 70 mtrs approxi as required.c suitable hp, 1500 rpm water cooled with radiator, diesel engine conforming to relevant is standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe xtended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential ilencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.d. m.s fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as quired. e suitable cement concrete foundation duly plastered and with anti vibration pads. note the head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point. the pump room is situated on the underground water tank. 2280 lpm at 70 m head., jockey pump a supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to is 12469 2019 suitable for automatic operation and consisting of following, complete in all respects as required jockey pump b horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c)suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase 50 hz ac supply with ip 55 class of protection for enclosure, horizontal foot mounted type with class f insulation, conforming to is 12615 2018. d m.s. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) suitable cement concrete foundation duly plastered and with anti vibration pads. note the pump room is situated on the underground water tank. 180 lpm at 70 m head, supplying, installation, testing and commissioning of electric driven terrace pump conforming to is 12469 2019 suitable for automatic operation and consisting of following, complete in all respects, as required terrace pump. b horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. c suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase, 50 hz, ac supply with ip55 class of protection for enclosure, horiziontal foot mounted type with class f insulation, conforming to is 12615 2018. d m.s.fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. e suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m head., control panels fabrication supply installation testing and commissioning of electrical control panel of cubical construction floor mounted type fabricated out of 2mm thick crca, artmentalised with hinged lockable doors, dust and vermin proof powder coated of approved shade after 7 tank treatment process, cable alley, inter connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring earth terminals, numbering etc. complete, suitable for main fire pump, pressurisation pump and diesel pump set complete as per cpwd specification with following in coming and outgoings, suitable for operation on 415v, 3 phase, 50hz ac supply with enclosure protection class ip 42 as required. incoming 250a, 50ka 4 pole mccb, ic equal to 100 percent icu rating digital voltmeter 0 500v with selector switch digital ammeter 0 250 a with selector swtich and cts etc. led type ryb phase indicating lamps, on, off, trip indicating lamps set of copper bus bar 300a. outgoing note all outgoing feeders for pumps should have digital ammeter with selector switches, and led type on, off, trip indicating lamps main fire pump 125 a, 50katpn mccb, ics is equal to 100 percent icu, with fully automatic star/delta starter suitable for 60 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/off operation. jockey pump jockey pump 63 a, 50ka tpn mccb, icsis equal to 100 percent icu, with suitable hp fully automatic star/delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, note may please be see at atc of special repair no. 5, supply installation testing and commissioning of fully automatic dol starter for terrace pump terrace pump siutable for operation on 3 phase 415 volt ac supply i/c making inter connection testing etc as requiored at site., sh ii pipes and accessories. providing laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per is 10221, refilling the trench etc. of following sizes complete as required. 150 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 50 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 80 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.100 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 150 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 200 mm dia wall thickness 6.3 mm, supplying and fixing single headed internal hydrant valve with instantaneous gunmetal/stainless steel coupling of 63 mm dia with cast iron wheel isi marked conforming to is 5290 type a with blank gunmetal/stainless steel cap and chain as required.single headed gunmetal, supplying and fixing single headed external yard hydrant valve with 1 no. 63 mm dia instantaneous fm gunmetal/stainless steel coupling and cast iron wheel, isi marked, conforming to is 5290 type a with blank gunmetal/stainless steel cap and chain as required. single headed gunmetal, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required . 50mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .80 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .100 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .150 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .200 mm dia, supplying and fixing orifice plate made out of 6 mm thick stainless steel grade 304 with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required., providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 50mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 80 mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 100 mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 150 mm dia., providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange. 80 mm dia, providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange.150 mm dia, providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange. 200 mm dia, supplying and fixing 63 mm dia, 15 m long rrl hose pipe with 63 mm dia male and femalecouplings duly bound with gi wire, rivets etc. conforming to is 636 type a as required. gun metal, supplying and fixing first aid hose reel with ms construction spray painted in post office red,conforming to is 884 complete with the following as required. a 20 mm nominal internal dia water hose thermoplastic textile reinforced type 2 as per is 12585 b 20 mm nominal internal dia gun metal globe valve and nozzle. c drum and brackets for fixing the equipmets on wall. d connections from riser with 25 mm dia stop gun metal valve and m.s. pipe and socket. 30 mtrs, supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to is 903 suitable for instantaneous connection to interconnect hose pipe coupling as required. gun meta, supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd for suitable dia ms pipe connection conforming to is 904 as required. 2 way 100 mm dia m.s. pipe, supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd for suitable dia ms pipe connection conforming to is 904 as required. 4 way 150 mm dia m.s. pipe, providing, installation, testing and commissioning of c.i flanged swing type foot valve isi marked of following sizes confirming to is 4038 complete with all acessories complete etc as required.200 mm dia, supplying and fixing air vessel made of 250 mm dia, 8 mm thick ms sheet, 1200 mm in height with airrelease valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required., providing and fixing of pressure switch in m.s. pipe line including connection etc. as required., providing and fixing in position industrial type pressure gauge with gun metal / brass valves complete etc. as required., providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, ms pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required. 150 mm dia, supplying and fixing of hose cabinet of size 750x mm x 600 mm x 250 mm made of 2 mm thick ms sheet with 6 mm thick glazed glass doors i/c necessary locking arrangement suitable to accommodate external hydrant with butterfly valve , 2 nos . 15 mtr. long hose pipe, 1 no branch pipe, mounted on wall or raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect , for external hydrant ,as required., cutting holes up to 15x15 cm in r.c.c. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1 2 4 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size, including finishing complete so as to make it leak proof., sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988. 4 core 16 sqmm, sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988 . 3.5 core 25 sq. mm, sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988. 3.5 core x 70 sq. mm, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. upto 35 sq. mm clamped with 1mm thick saddle, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. above 35 sq. mm and upto 95 sq. mm clamped with 25 mm and 3mm ms flat clamp., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. above 185 sq. mm and upto 400 sq. mm clamped with 40mm and 3mm ms flat clamp, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required. upto 35 sq. mm clamped with 1mm thick saddle., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required.above 35 sq. mm and upto 95 sq. mm clamped with 25mm and 3mm ms flat clamp., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required.above 185 sq. mm and upto 400 sq. mm clamped with 40mm 3mm ms flat clamp, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.upto 35 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.mm above 35 sq. mm and upto 95 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.above 185 sq. mm and upto 400 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. upto 35 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. above 35 sq. mm and upto 95 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. above 185 sq. mm and upto 400 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 4 core 16 sq. mm size 28mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 25 sq. mm size 28mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 70 sq. mm size 38mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 300 sq. mm size 70mm, supplying and laying of 2core 1.5 sqmm fire alarm armoured cable, 600/1000v rated with annealed copper conductor having xlpe insulation, steel wire armouring and frls/hffr outer sheath complete as required., supplying and installaton following size of perforated painted with powder coating m.s. cable trays with perforation not more than 17.5 percent, in convenient sections, joined with connectors, suspended from the ceiling with two numbers ms/gi suspenders including base of suitable size ms/gi angle, bolts and nuts, painting suspenders, fastener etc as required. 100 mm wide , 50 mm depth , 1.6 mm thickness, earthing with g.i. earth plate 600 mm length x 600 width and 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal / coke and salt as required., providing and fixing 25 mm wide and 5 mm thick g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut, bolt, spring, washer excavation and re filling etc. as required., providing and fixing 25 mm wide and 5 mm thick g.i. strip on surface or in recess for connections etc. as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., providing and fixing following sizes g.i. pipes complete with g.i. fittings including trenching and refilling etc. 80 mm dia nominal bore
Agency / Dept :
bharat sanchar nigam limited BSNL
Due Date :
Oct 22, 2026 (7 days left)
Tender Value :
59.95L
View Documents
T18 Ref No : 17566601
Location : north goa , goa
Source : GEM Tenders
LIVE TENDER
tender for isolation control and installation , gi pipe 1 2 inch class c for domestic png gas service piping installation and connection work , gi pipe 3 4 inch class c for domestic png gas service piping installation and connection work , gi pipe 1 inch class c for domestic png gas service piping installation and connection work , gi elbow 1 2 inch for domestic png gas piping direction change and threaded pipe connection , gi elbow 3 4 inch for domestic png gas piping direction change and threaded pipe connection , gi e tee 1 2 inch for domestic png gas piping branch connection and distribution , gi e tee 3 4 inch for domestic png gas piping branch connection and distribution , gi socket 1 2 inch for domestic png gas pipe threaded jointing and connection , gi socket 3 4 inch for domestic png gas pipe threaded jointing and connection , gi reducing tee 3 4 inch x 1 2 inch for domestic png gas piping branch connection and size reduction , gi union 1 2 inch for domestic png gas pipe connection disconnection and maintenance , gi union 3 4 inch for domestic png gas pipe connection disconnection and maintenance , gi plug 1 2 inch for closing and terminating domestic png gas pipe or fitting connections , gi plug 3 4 inch for closing and terminating domestic png gas pipe or fitting connections , gi plug 1 inch for closing and terminating domestic png gas pipe or fitting connections , gi clamp 1 2 inch for supporting fixing and securing domestic png gas piping on walls and supporting surfaces , gi clamp 3 4 inch for supporting fixing and securing domestic png gas piping on walls and supporting surfaces , gi clamp 1 inch for supporting fixing and securing domestic png gas piping on walls and supporting surfaces , gi nipple 1 2 inch x 2 inch for domestic png gas pipe valve and fitting threaded connection , gi nipple 1 2 inch x 3 inch for domestic png gas pipe valve and fitting threaded connection , gi nipple 1 2 inch x 4 inch for domestic png gas pipe valve and fitting threaded connection , gi nipple 1 2 inch x 6 inch for domestic png gas pipe valve and fitting threaded connection , gi nipple 3 4 inch x 2 inch for domestic png gas pipe valve and fitting threaded connection , gi nipple 3 4 inch x 3 inch for domestic png gas pipe valve and fitting threaded connection , gi nipple 3 4 inch x 4 inch for domestic png gas pipe valve and fitting threaded connection , gi nipple 3 4 inch x 6 inch for domestic png gas pipe valve and fitting threaded connection , meter bracket clamp u type 11 x 19 cm for domestic png gas meter support fixing and installation , plate marker 300 x 250 mm 3 mm thick for domestic png gas installation identification marking and asset identification , teflon tape for sealing threaded joints and preventing leakage in domestic png gas piping fittings and connections , ss screw 35 x 8 mm for fixing and supporting domestic png gas piping fittings brackets and installation components , rawal plug for fixing and anchoring domestic png gas pipe supports clamps brackets and installation, gi and copper tubes, brass adaptor, 1/2 inch x 12 mm, suitable for connecting the specified png domestic gas service components. the adaptor shall be manufactured from good-quality corrosion-resistant brass, accurately machined, free from cracks, burrs, sharp edges and casting defects, and shall provide proper dimensional compatibility and leak-tight connection. threads and connection ends shall be clean and properly formed. the item shall be suitable for natural gas service and domestic png meter installation/conversion work., brass disconnection union, 3/4 inch x 12 mm, suitable for connection and disconnection of png domestic gas piping/metering components. the fitting shall be made from good-quality corrosion-resistant brass, properly machined and dimensionally accurate. it shall have clean, properly formed connection ends and threads, free from cracks, burrs and other defects, and shall provide a secure, leak-tight joint under normal png service conditions., meter inlet fitting, 3/4 inch x 3/4 inch, suitable for connecting the gas meter inlet to the associated png service piping. the fitting shall be made from good-quality brass or approved equivalent material suitable for natural gas service, with accurate dimensions, properly formed threads and smooth internal passages. it shall be free from cracks, burrs and manufacturing defects and shall permit secure, leak-tight installation of domestic png meters., meter outlet fitting, 3/4 inch x 12 mm, suitable for connecting the gas meter outlet with the downstream png service connection. the fitting shall be manufactured from good-quality corrosion-resistant material suitable for natural gas service. dimensions, threads and connection ends shall be accurate and properly finished, with no cracks, burrs or visible defects, and shall ensure a secure and leak-tight joint during normal operation., copper pipe, 2 mm, suitable for domestic png gas installation and meter connection work as specified. the pipe shall be of suitable copper material and quality for natural gas service, with uniform dimensions, clean internal and external surfaces and freedom from cracks, pinholes, excessive dents, corrosion or other manufacturing defects. it shall be supplied in usable lengths/condition and shall permit proper cutting, bending, jointing and leak-tight installation., copper socket, 12 mm, pre-soldered, suitable for joining 12 mm copper pipe used in domestic png gas installation. the socket shall be manufactured from suitable copper/copper-alloy material, accurately dimensioned and properly finished. the pre-soldered jointing provision shall enable reliable installation when used with the specified copper pipe. the fitting shall be free from cracks, burrs and deformation and shall provide a secure, leak-tight connection suitable for natural gas service., copper elbow, 12 mm, pre-soldered, suitable for making directional changes in 12 mm copper pipe used for domestic png gas installation. the fitting shall be made from suitable copper/copper-alloy material with accurate dimensions and smooth connection ends. it shall be properly formed, free from cracks, deformation and burrs, and suitable for creating a secure, leak-tight connection in natural gas service when installed using the approved joining procedure., soldering wire suitable for joining copper fittings and copper piping used in domestic png installation works. the solder shall be of suitable composition and quality for the intended application and shall provide reliable wetting and joint formation when used with the approved flux and installation procedure. it shall be supplied clean, free from excessive oxidation and contamination, and suitable for producing durable, leak-tight joints under normal service conditions., flux suitable for soldering/joining copper pipes and fittings used in domestic png gas installation works. the flux shall be compatible with the specified solder and copper materials and shall promote proper wetting and joint formation. it shall be of consistent quality, free from harmful contamination and suitable for the approved installation procedure. residues shall be capable of being properly cleaned after jointing to avoid corrosion or deterioration of the piping system., pvc clip suitable for securing/supporting domestic png service piping or associated installation components. the clip shall be manufactured from good-quality, durable pvc or approved equivalent material, resistant to normal environmental conditions and suitable for the intended pipe size. it shall be free from cracks, sharp edges and deformation and shall provide firm support without damaging or excessively compressing the pipe., rubber hose, 1 metre length, suitable for the specified domestic png installation/service application. the hose shall be manufactured from good-quality flexible material compatible with natural gas service and normal operating conditions. it shall have uniform construction, suitable flexibility and adequate resistance to ageing, cracking and deterioration. hose ends shall be suitable for secure connection with the associated fittings and shall permit a leak-tight installation., rubber hose, 1.5 metre length, suitable for the specified domestic png installation/service application. the hose shall be made from good-quality flexible material compatible with natural gas service and the expected operating environment. it shall be free from cuts, cracks, blisters, kinks and manufacturing defects and shall have suitable connection ends for secure installation. the hose shall provide a durable and leak-tight connection when installed with approved fittings., app valve, 1/2 inch, suitable for domestic png gas installation and isolation/control application. the valve shall be manufactured from suitable gas-service material, with corrosion-resistant body and properly finished connection ends. it shall provide smooth operation, positive shut-off and reliable sealing under normal natural gas service conditions. the valve shall be free from casting, machining or thread defects and shall be suitable for safe installation in the png domestic service line., isolation valve (iv), 1/2 inch, suitable for isolation of domestic png gas service piping or connected equipment. the valve shall be of suitable construction and material for natural gas service and shall provide positive shut-off with reliable sealing. connection ends shall be accurately dimensioned and properly threaded/finished. the valve shall operate smoothly, be free from visible defects and be suitable for repeated operation under normal service conditions., isolation valve (iv), 3/4 inch, suitable for isolation of domestic png gas service piping or connected equipment. the valve shall be manufactured from suitable gas-service material and shall provide positive shut-off and dependable sealing. connection ends shall be accurate and properly finished, with no cracks, burrs or thread defects. the valve shall operate smoothly and shall be suitable for installation in domestic png gas distribution/service arrangements., isolation valve (iv), 1 inch, suitable for isolation of domestic png gas piping or associated equipment. the valve shall be manufactured from suitable material compatible with natural gas service and shall provide reliable shut-off and sealing. it shall have accurately formed connection ends, smooth operation and robust construction suitable for normal field installation. the valve shall be free from manufacturing defects and shall be suitable for safe, leak-tight service., gi pipe, 1/2 inch, class c, suitable for domestic png gas installation/service piping as specified. the pipe shall be galvanized iron/steel of the specified class, with uniform dimensions, sound galvanizing and clean internal and external surfaces. it shall be free from cracks, excessive dents, corrosion, laminations and other defects. pipe ends shall be suitable for threading and joining with compatible fittings and shall provide durable service under normal installation conditions., gi pipe, 3/4 inch, class c, suitable for domestic png gas installation/service piping. the pipe shall be manufactured from galvanized iron/steel conforming to the specified class and shall have uniform wall thickness, sound galvanizing and properly finished ends suitable for threading. it shall be free from cracks, laminations, excessive dents, corrosion and other defects and shall be suitable for secure and leak-tight connection with compatible gi fittings., gi pipe, 1 inch, class c, suitable for domestic png gas installation/service piping. the pipe shall be of good-quality galvanized iron/steel construction with uniform dimensions and sound galvanizing. it shall have properly finished ends suitable for threading and joining and shall be free from cracks, laminations, excessive dents, corrosion and other manufacturing defects. the pipe shall be suitable for durable installation and normal natural gas service conditions., gi elbow, 1/2 inch, suitable for changing the direction of 1/2 inch gi piping used in png installation work. the fitting shall be made from good-quality galvanized iron/steel or approved equivalent material, accurately dimensioned and properly threaded. it shall be free from cracks, casting defects, burrs and damaged threads and shall provide a secure, leak-tight connection with compatible gi pipe and fittings., gi elbow, 3/4 inch, suitable for changing the direction of 3/4 inch gi piping used in domestic png installation work. the fitting shall be of good-quality galvanized iron/steel or approved equivalent construction, with accurately formed threads and smooth surfaces. it shall be free from cracks, deformation, burrs and thread defects and shall provide a durable, secure and leak-tight connection when properly installed., gi e-tee, 1/2 inch, suitable for branching 1/2 inch gi piping in domestic png installation work. the tee shall be manufactured from suitable galvanized iron/steel or approved equivalent material, with accurate dimensions and properly formed threaded ends. it shall be free from cracks, casting defects, burrs and damaged threads and shall provide secure and leak-tight connections with compatible pipe and fittings., gi e-tee, 3/4 inch, suitable for branching 3/4 inch gi piping in domestic png installation work. the fitting shall be made from good-quality galvanized iron/steel or approved equivalent material, properly dimensioned and threaded. it shall have sound construction, clean threads and smooth connection surfaces and shall be free from cracks, deformation and manufacturing defects. the tee shall provide secure and leak-tight connections after installation., gi socket, 1/2 inch, suitable for joining two compatible 1/2 inch gi pipe sections in domestic png installation. the socket shall be manufactured from suitable galvanized iron/steel or approved equivalent material, with accurate internal threads and proper dimensional compatibility. it shall be free from cracks, burrs, damaged threads and other defects and shall permit secure, leak-tight jointing using the approved sealing method., gi socket, 3/4 inch, suitable for joining two compatible 3/4 inch gi pipe sections in domestic png installation. the socket shall be manufactured from suitable galvanized iron/steel or approved equivalent material with accurately formed internal threads. it shall be free from cracks, deformation, burrs and thread defects and shall provide reliable mechanical engagement and a secure, leak-tight connection when installed with compatible piping., gi reducing tee, 3/4 inch x 1/2 inch, suitable for making a branch connection between the specified gi pipe sizes in domestic png installation. the fitting shall be made from good-quality galvanized iron/steel or approved equivalent material with accurate dimensions and properly formed threads. it shall be free from cracks, burrs and casting defects and shall provide secure, leak-tight connections with compatible piping and fittings., gi union, 1/2 inch, suitable for connecting and allowing convenient disconnection of 1/2 inch gi piping used in domestic png installation. the union shall be manufactured from suitable galvanized iron/steel or approved equivalent material, with accurately formed threads and mating surfaces. it shall be free from cracks, burrs and thread damage and shall provide a durable, secure and leak-tight joint during normal service., gi union, 3/4 inch, suitable for connecting and allowing convenient disconnection of 3/4 inch gi piping used in domestic png installation. the fitting shall be made from suitable galvanized iron/steel or approved equivalent material, with accurate dimensions and properly finished threads. it shall be free from manufacturing defects and shall provide reliable mechanical connection, easy maintenance/disconnection and leak-tight service., gi plug, 1/2 inch, suitable for closing/sealing a 1/2 inch threaded gi pipe or fitting connection in domestic png installation. the plug shall be made from suitable galvanized iron/steel or approved equivalent material with properly formed external threads. it shall be free from cracks, burrs and thread defects and shall provide secure sealing with the approved jointing/sealing method under normal natural gas service conditions., gi plug, 3/4 inch, suitable for closing/sealing a 3/4 inch threaded gi pipe or fitting connection in domestic png installation. the plug shall be manufactured from suitable galvanized iron/steel or approved equivalent material, with accurate external threads and sound construction. it shall be free from cracks, burrs and deformation and shall provide a secure, leak-tight closure when installed with the approved sealing material., gi plug, 1 inch, suitable for closing/sealing a 1 inch threaded gi pipe or fitting connection in domestic png installation. the plug shall be made from good-quality galvanized iron/steel or approved equivalent material, with accurately formed external threads. it shall be free from cracks, casting defects, burrs and damaged threads and shall provide reliable mechanical engagement and leak-tight sealing under normal service conditions., gi clamp, 1/2 inch, suitable for supporting and securing 1/2 inch gi pipe in domestic png installation. the clamp shall be manufactured from suitable durable material with adequate strength and corrosion resistance for the intended environment. it shall be dimensionally suitable for the specified pipe size, free from sharp edges and defects, and capable of securely holding the pipe without causing damage, excessive deformation or coating deterioration., gi clamp, 3/4 inch, suitable for supporting and securing 3/4 inch gi pipe in domestic png installation. the clamp shall be of good-quality construction, dimensionally compatible with the specified pipe and suitable for normal indoor/outdoor installation conditions. it shall provide firm support without damaging the pipe and shall be free from sharp edges, cracks, deformation and other defects. fixing arrangement shall be suitable for secure installation., gi clamp, 1 inch, suitable for supporting and securing 1 inch gi pipe in domestic png installation. the clamp shall be manufactured from suitable durable and corrosion-resistant material and shall have adequate mechanical strength for the intended service. it shall fit the specified pipe size correctly, have smooth edges and provide firm support without damaging or excessively compressing the pipe., gi nipple, 1/2 inch x 2 inch, suitable for extending or connecting 1/2 inch threaded gi piping and fittings in domestic png installation. the nipple shall be manufactured from suitable galvanized iron/steel or approved equivalent material with accurately formed external threads at both ends. it shall be free from cracks, burrs and thread defects and shall provide a secure, leak-tight connection using the approved jointing method., gi nipple, 1/2 inch x 3 inch, suitable for extending or connecting 1/2 inch threaded gi piping and fittings in domestic png installation. the nipple shall be of good-quality galvanized iron/steel or approved equivalent construction with properly formed external threads at both ends. it shall have accurate dimensions and be free from cracks, deformation, burrs and damaged threads, providing secure and leak-tight connection after installation., gi nipple, 1/2 inch x 4 inch, suitable for extending or connecting 1/2 inch threaded gi piping and fittings in domestic png installation. the fitting shall be manufactured from suitable galvanized iron/steel or approved equivalent material, with accurate length and properly formed external threads at both ends. it shall be free from cracks, burrs and thread defects and shall provide durable, secure and leak-tight service., gi nipple, 1/2 inch x 6 inch, suitable for extending or connecting 1/2 inch threaded gi piping and fittings in domestic png installation. the nipple shall be made from suitable galvanized iron/steel or approved equivalent material with accurately formed external threads. it shall have sound construction, proper dimensions and clean threads, and shall be free from cracks, burrs, deformation and other manufacturing defects., gi nipple, 3/4 inch x 2 inch, suitable for extending or connecting 3/4 inch threaded gi piping and fittings in domestic png installation. the nipple shall be manufactured from suitable galvanized iron/steel or approved equivalent material with accurately formed external threads at both ends. it shall be dimensionally correct, free from cracks and burrs, and capable of providing a secure and leak-tight threaded connection., gi nipple, 3/4 inch x 3 inch, suitable for extending or connecting 3/4 inch threaded gi piping and fittings in domestic png installation. the fitting shall be of good-quality galvanized iron/steel or approved equivalent construction with accurate dimensions and properly formed external threads. it shall be free from cracks, deformation, burrs and damaged threads and shall provide reliable leak-tight service when installed correctly., gi nipple, 3/4 inch x 4 inch, suitable for extending or connecting 3/4 inch threaded gi piping and fittings in domestic png installation. the nipple shall be manufactured from suitable galvanized iron/steel or approved equivalent material, with proper length, accurate dimensions and clean external threads at both ends. it shall be free from cracks, burrs and manufacturing defects and suitable for secure threaded jointing., gi nipple, 3/4 inch x 6 inch, suitable for extending or connecting 3/4 inch threaded gi piping and fittings in domestic png installation. the nipple shall be made from suitable galvanized iron/steel or approved equivalent material with properly formed external threads and sound construction. it shall be free from cracks, deformation, burrs and damaged threads and shall provide a durable, secure and leak-tight connection., meter bracket, clamp u-type, approximately 11 x 19 cm, suitable for supporting and securely mounting the domestic png gas meter as specified. the bracket shall be of robust construction and suitable for the intended meter mounting arrangement. it shall have adequate mechanical strength, proper dimensional accuracy and corrosion resistance suitable for the installation environment. edges shall be smooth and free from sharp projections, and the bracket shall permit firm and stable meter installation., plate marker, approximately 300 x 250 mm and 3 mm thick, suitable for identification/marking of the specified png installation. the plate shall be manufactured from durable material suitable for the intended indoor/outdoor service environment and shall have the specified dimensions and thickness. the surface shall be suitable for clear, durable marking/identification and shall be free from excessive warping, sharp edges, cracks and manufacturing defects., teflon tape suitable for sealing threaded joints in domestic png gas piping and fittings. the tape shall be of good-quality ptfe material compatible with natural gas service and suitable for the specified threaded connections. it shall be uniform, clean and free from tears or contamination and shall provide effective sealing when correctly applied. the tape shall be suitable for normal temperature and pressure conditions associated with domestic png installation work., ss screw, 35 x 8 mm, suitable for fixing/supporting components used in domestic png installation works. the screw shall be manufactured from suitable stainless-steel material with adequate mechanical strength and corrosion resistance. it shall have accurately formed threads, a properly finished head and a sharp/appropriate point suitable for the intended fixing application. the screw shall be free from rust, cracks, damaged threads and other manufacturing defects., rawal plug suitable for anchoring/fixing supports, clamps, brackets or associated components to masonry/concrete surfaces in domestic png installation works. the plug shall be manufactured from good-quality durable material with suitable expansion characteristics and dimensional compatibility with the specified screw. it shall be free from cracks and deformation and shall provide reliable holding strength when installed in accordance with the manufacturer-approved method., m/f elbow, 1/2 inch, suitable for connecting 1/2 inch threaded png piping where a male-to-female directional connection is required. the fitting shall be manufactured from suitable material compatible with natural gas service, with accurately formed male and female threads. it shall be free from cracks, burrs, deformation and thread defects and shall provide a secure, leak-tight connection with compatible piping and fittings., s.s. plate suitable for the specified domestic png installation, with hole diameter suitable for 1/2 inch pipe. the plate shall be manufactured from good-quality stainless steel with adequate strength and corrosion resistance for the intended service environment. the plate shall have a properly formed hole suitable for accommodating the specified 1/2 inch pipe, with smooth edges and no sharp projections. it shall be dimensionally accurate, free from cracks, excessive deformation and surface defects, and suitable for secure installation.
Agency / Dept :
goa natural gas private limited GNGPL
Due Date :
Oct 22, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17720025
Location : chennai , tamil nadu
Source : GEM Tenders
LIVE TENDER
corrigendum tender for hardware items - pneumatic materials , hardware items paint , hardware items paint brushes , hardware items , hardware items cutting disc, pneumatic flexible blue air hose with an outer diameter of six millimeters and roll length of ninety meters, pneumatic flexible blue air hose with an outer diameter of eight millimeters and roll length of ninety meters, pneumatic flexible blue air hose with an outer diameter of ten millimeters and roll length of ninety meters, pneumatic straight push in air hose connector suitable for six millimeter tubing, pneumatic straight push in air hose connector suitable for eight millimeter tubing, pneumatic straight push in air hose connector suitable for ten millimeter tubing, pneumatic air hose tube reducer connecting six millimeter tubing to eight millimeter tubing, pneumatic air hose tube reducer connecting eight millimeter tubing to ten millimeter tubing, pneumatic equal tee connector for six millimeter pneumatic tubing, pneumatic equal tee connector for eight millimeter pneumatic tubing, pneumatic equal tee connector for ten millimeter pneumatic tubing, pneumatic threaded straight connector with one eighth inch male thread for six millimeter hose, pneumatic threaded straight connector with one fourth inch male thread for six millimeter hose, pneumatic threaded straight connector with three eighths inch male thread for six millimeter hose, pneumatic threaded straight connector with one half inch male thread for six millimeter hose, pneumatic threaded straight connector with three fourths inch male thread for six millimeter hose, pneumatic threaded straight connector with one inch male thread for six millimeter hose, pneumatic threaded straight connector with one eighth inch male thread for eight millimeter hose, pneumatic threaded straight connector with one fourth inch male thread for eight millimeter hose, pneumatic threaded straight connector with three eighths inch male thread for eight millimeter hose, pneumatic threaded straight connector with one half inch male thread for eight millimeter hose, pneumatic threaded straight connector with three fourths inch male thread for eight millimeter hose, pneumatic threaded straight connector with one inch male thread for eight millimeter hose, pneumatic threaded elbow connector with one eighth inch male thread for six millimeter hose, pneumatic threaded elbow connector with one fourth inch male thread for six millimeter hose, pneumatic threaded elbow connector with three eighths inch male thread for six millimeter hose, pneumatic threaded elbow connector with one half inch male thread for six millimeter hose, pneumatic threaded elbow connector with three fourths inch male thread for six millimeter hose, pneumatic threaded elbow connector with one inch male thread for six millimeter hose, pneumatic threaded elbow connector with one eighth inch male thread for eight millimeter hose, pneumatic threaded elbow connector with one fourth inch male thread for eight millimeter hose, pneumatic threaded elbow connector with three eighths inch male thread for eight millimeter hose, pneumatic threaded elbow connector with one half inch male thread for eight millimeter hose, pneumatic threaded elbow connector with three fourths inch male thread for eight millimeter hose, pneumatic threaded elbow connector with one inch male thread for eight millimeter hose, pneumatic threaded branch tee connector with one fourth inch male thread for six millimeter hose, pneumatic threaded branch tee connector with one fourth inch male thread for eight millimeter hose, pneumatic union connector for six millimeter flexible air hose lines, pneumatic union connector for eight millimeter flexible air hose lines, white synthetic enamel finish paint supplied in four liter containers, signal red synthetic enamel finish paint supplied in four liter containers, smoke grey synthetic enamel finish paint supplied in four liter containers, golden yellow synthetic enamel finish paint supplied in four liter containers, royal blue synthetic enamel finish paint supplied in four liter containers, lush green synthetic enamel finish paint supplied in four liter containers, gloss black synthetic enamel finish paint supplied in four liter containers, industrial orange synthetic enamel finish paint supplied in four liter containers, general purpose enamel paint thinner solvent supplied in five liter containers, high temperature heat resistant aluminium protective coating paint in one liter containers, professional paint application brush with a width of one inch, professional paint application brush with a width of two inches, professional paint application brush with a width of three inches, professional paint application brush with a width of four inches, heavy duty steel wire scrubber equipped with an ergonomic wooden or composite handle, non toxic food grade certified machinery lubricating grease, multi purpose heavy duty industrial mechanical lubrication grease, reconditioned multi application utility machinery grease, waterproof silicon carbide abrasive paper emery sheet with grit grade eighty, waterproof silicon carbide abrasive paper emery sheet with grit grade one hundred, waterproof silicon carbide abrasive paper emery sheet with grit grade one hundred twenty, waterproof silicon carbide abrasive paper emery sheet with grit grade one hundred fifty, waterproof silicon carbide abrasive paper emery sheet with grit grade one hundred eighty, waterproof silicon carbide abrasive paper emery sheet with grit grade two hundred twenty, waterproof silicon carbide abrasive paper emery sheet with grit grade two hundred eighty, waterproof silicon carbide abrasive paper emery sheet with grit grade three hundred twenty, high speed carbon steel hacksaw blade measuring one inch wide and twelve inches long, high speed rapid metal cutting abrasive disc four inches diameter rated for thirteen thousand two hundred eighty revolutions per minute, heavy duty metal grinding wheel four inches diameter and six millimeters thickness rated for eighty meters per second operating speed, cotton thread ball spool used for plumbing thread sealing work, gasket shellac compound adhesive liquid solution supplied in fifty milliliter bottles, fine grade premium white portland cement for architectural and repair work, white acrylic wall putty powder compound for smoothing wall surfaces, penetrating multi use rust remover and lubricant aerosol spray in five hundred milliliter cans, high performance room temperature vulcanizing silicone gasket maker sealant paste eighty five grams, high strength engineering adhesive and threadlocker twenty grams tube packaging, flexible steel wall putty blade with sturdy handle having width of two inches, flexible steel wall putty blade with sturdy handle having width of three inches, flexible steel wall putty blade with sturdy handle having width of four inches, flexible steel wall putty blade with sturdy handle having width of six inches, flexible steel wall putty blade with sturdy handle having width of eight inches, paint application roller tool complete with foam sleeve measuring two inches, paint application roller tool complete with roller sleeve measuring four inches, paint application roller tool complete with roller sleeve measuring six inches, paint application roller tool complete with roller sleeve measuring nine inches, multi purpose two part epoxy sealant compound putty packaged in twenty five gram packs, clean soft white cotton banian cloth wiping rags for industrial cleaning and workshop use, heavy duty silicone surface lubricant aerosol protective spray in five hundred milliliter cans, complete metal hand thread tap drill bit set and adjustable tap wrench covering sizes m3 m4 m5 m6 m8 m10 and m12, high speed steel straight shank metal drill bit set containing sizes from one millimeter through thirteen millimeters, tungsten carbide masonry wall drill bit set covering sizes six eight ten twelve fourteen and sixteen millimeters, double ended phillips ph2 and slotted flat screwdriver power bits
Agency / Dept :
bcg vaccine laboratory
Due Date :
Oct 16, 2026 (1 day left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17175773
Location : gorakhpur , uttar pradesh
tender for male branch tee union connector, male branch tee union connector as per drg. no. icf/std 3-5-132 item-1, alt. nil - warrant y period: 30 months after the date of delivery
Agency / Dept :
north eastern railway NER
Due Date :
Oct 01, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16730123
Location : chennai , tamil nadu
tender for pipe & fitting for lhb bogie, one set of ss tubes and double ferrule for brake piping arrangement of lh b bogies as per icf specification no. icf/md spec-166,issue status-01,rev-04, amd-01 ,amd-0 2 and amd-03,consisting of 1. bulk head elbow (with conical seating) 3/4od x m26 x 1.5(m) to drg.no.icf/std-3-5-113 ,item-1,alt c qty-3 nos. 2. bulk head elbow 3/4 od to drg.no.ic f/std-3-5-117-item-1,altb,qty-l no. 3. male elbow (with conical seating) 1/2 bspt(m) x m26 x 1.5(m) to drg.no. icf/std-3-5-115,item-1,alt nil, qty-4 nos. 4. special adaptor 1/2 bsp(m) x 1/2 bsp(f) to drg. no. icf/std-3-5-116, item-1,altc,qty-4 nos. 5. male branch tee union ( with conical seating) 3/4 od x m26 x1.5(m) to drg.no. icf/std-3-5-132,item-1, alt nil ,qty-l no. 6. bulk head swivel union 3/4 od to drg. no. icf/std-3-5-133-item-1, alt nil qty-2 nos. 7. union tee 3/4 od to drg. no.icf/std-3-5-018-item-2,altb,qty-1 no. 8. bulk head male construction of nnector(with conical seating) 3/4od x m26 x 1.5(m) to drg. no.lwscwac-3-2-005,item-1, al t nil qty-2 nos. 9. ss seamless pipe 3/4 od x 6400 mm astm a269 gr.tp 304 to icf/md/spec-16 6,issue status-01,rev-04,amd-01 ,amd-02 and amd-03,qty-l no. - warranty period: 30 months af ter the date of delivery -quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs
Agency / Dept :
integral coach factory ICF
Due Date :
Aug 17, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16908428
Location : chennai , tamil nadu
tender for pipe & fitting for lhb bogie, one set of ss tubes and double ferrule for brake piping arrangement of lh b bogies as per icf specification no. icf/md/spec-166,issue status-01,rev-04, amd-01 ,amd-0 2 and amd-03,consisting of 1. bulk head elbow (with conical seating) 3/4od x m26 x 1.5(m) to drg.no.icf/std-3-5-113 ,item-1,alt c qty-3 nos. 2. bulk head elbow 3/4 od to drg.no.ic f/std-3-5-117-item-1,altb,qty-l no. 3. male elbow (with conical seating) 1/2 bspt(m) x m26 x 1.5(m) to drg.no. icf/std-3-5-115,item-1,alt nil, qty-4 nos. 4. special adaptor 1/2 bsp(m) x 1/2 bsp(f) to drg. no. icf/std-3-5-116, item-1,altc,qty-4 nos. 5. male branch tee union ( with conical seating) 3/4 od x m26 x 1.5(m) to drg.no. icf/std-3-5-132,item-1, alt nil ,qty- l no. 6. bulk head swivel union 3/4 od to drg. no. icf/std-3-5-133-item-1, alt nil qty-2 nos. 7. union tee 3/4 od to drg. no.icf/std-3-5-018-item-2,altb,qty-1 no. 8. bulk head male construction of nnector(with conical seating) 3/4od x m26 x 1.5(m) to drg. no.lwscwac-3-2-005,item-1, al t nil qty-2 nos. 9. ss seamless pipe 3/4 od x 6400 mm astm a269 gr.tp 304 to icf/md/spec-16 6,issue status-01,rev-04,amd-01 ,amd-02 and amd-03,qty-l no. - warranty period: 48 months af ter the date of delivery
Agency / Dept :
integral coach factory ICF
Due Date :
Aug 25, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17081354
Location : perambalur , tamil nadu
tender for one set of ss tubes and double ferrule f, one set of ss tubes and double ferrule for brake piping arrangement of lh b bogies as per icf specification no. icf/md/spec-166,issue status-01,rev-04,amd-01 & amd- 02, consisting of 1. bulk head elbow (with conical seating) 3/4od x m26 x 1.5(m) to drg.n o.icf/std-3-5-113 ,item-1,alt-c, qty-3 nos. 2. bulk head elbow 3/4 od to drg.no.icf/std3-5-1 17-item-1,alt-b, qty-1 no. 3. male elbow (with conical seating) 1/2 bspt(m) x m26 x 1.5(m) to drg.no. icf/std-3-5-115,item-1,alt -nil, qty-4 nos. 4. special adaptor 1/2 bsp(m) x 1/2 bsp(f) to drg. no. icf/std-3-5-116,item-1,alt-c,qty-4 nos. 5. male branch tee union (with conical seating) 3/4 od x m26 x 1.5(m) to drg.no. icf/std-3-5-132,item-1, alt -nil ,qty-1 no. 6. bulk he ad swivel union 3/4 od to drg. no. icf/std-3-5-133-item-1, alt nil, qty-2 nos. 7. union tee 3/ 4 od to drg. no.icf/std-3-5-018 item-2,alt-b,qty- 1 no. 8. bulk head male connector(with c onical seating) 3/4od x m26 x 1.5(m) to drg. no.lwscwac-3-2-005,item-1, alt -nil, qty-2 nos. 9. ss seamless pipe 3/4 od x 6400 mm astm a269 gr.tp 304 to icf/md/spec166,issue status-01 ,rev-04,amd-01 & amd-02,qty-1 no. - warranty period: 48 months after the date of delivery
Agency / Dept :
southern railway SR
Due Date :
Sep 29, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Male Branch Tee. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Male Branch Tee sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Male Branch Tee Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Male Branch Tee, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Male Branch Tee Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Male Branch Tee Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Male Branch Tee.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Male Branch Tee depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Male Branch Tee Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Male Branch Tee bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Male Branch Tee. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Male Branch Tee, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Male Branch Tee, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Male Branch Tee?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Male Branch Tee tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Male Branch Tee?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Male Branch Tee, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Male Branch Tee is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All