sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

16Latest Lubrication controller Tenders List

Latest Lubrication controller Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Lubrication controller tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Lubrication controller tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Lubrication controller Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Lubrication controller tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Lubrication controller Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Lubrication controller Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Lubrication controller Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Lubrication controller tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Lubrication controller Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Lubrication controller sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Lubrication controller tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Lubrication controller tenders.

Is EMD mandatory for all Lubrication controller tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Lubrication controller work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Lubrication controller tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Lubrication controller Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16990505
Location : bangalore , karnataka
Source : GEM Tenders
NEW TENDER
tender for cnc high precision turn mill centre with y axis, live tool turret and sub spindle as per specification in clause 4 , servo line tool turret turret type bmt 55 live turret make and model sauter turret tool station 12 , radial turning holders , axial holders , chip conveyor with high pressure coolant system pressure 10 bar or better and coolant system with tank capacity 400 ltrs or better , cnc controller siemens, sinumerik 828d or latest version , electrical cabinet with ac , automatic lubrication system , servo stabilizer and isolation transformer of suitable capacity , oil skimmer , axial rotating tool holder for radial application without collets , axial tool holder right hand c1 and left hand c2, overhead c40 25 84 , radial rotating tool holder for axial application without collets , radial tool holder left hand short and short over head , static turning tool holder , static boring tool holder , angular rotating tool holder without collets , set of sleeves , first fill of oil , maintenance tool kit , high or low chucking system for main and sub spindle , power operated dead length collet system , radial boring tool holder , blum laser tool length measuring system , job or work piece measuring probe rmp 60 renishaw radio probe or latest version with 3d probing cycles for measurement , manuals and documents in english hard copy 1 set soft copy in a pen drive or dvd or cd 1 no , er type collet holder with collets in steps of 1 mm from diameter 3 mm to 25 mm, procurement of cnc turn mill center, cnc high precision turn mill centre with y axis, live tool turret and sub spindle as per specification in clause 4, servo line tool turret turret type bmt 55 live turret make and model sauter turret tool station 12, radial turning holders, axial holders, chip conveyor with high pressure coolant system pressure 10 bar or better and coolant system with tank capacity 400 ltrs or better, cnc controller siemens, sinumerik 828d or latest version, electrical cabinet with ac, automatic lubrication system, servo stabilizer and isolation transformer of suitable capacity, oil skimmer, axial rotating tool holder for radial application without collets, axial tool holder right hand c1 and left hand c2, overhead c40 25 84, radial rotating tool holder for axial application without collets, radial tool holder left hand short and short over head, static turning tool holder, static boring tool holder, angular rotating tool holder without collets, set of sleeves, first fill of oil, maintenance tool kit, high or low chucking system for main and sub spindle, power operated dead length collet system, radial boring tool holder, blum laser tool length measuring system, job or work piece measuring probe rmp 60 renishaw radio probe or latest version with 3d probing cycles for measurement, manuals and documents in english hard copy 1 set soft copy in a pen drive or dvd or cd 1 no, er type collet holder with collets in steps of 1 mm from diameter 3 mm to 25 mm
Agency / Dept :
council of scientific and industrial research CSIR
Due Date :
Sep 18, 2026 (18 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 15617188
Location : sonbhadra , uttar pradesh
Source : GEM Tenders
tender for bare pump jaguar, part no. 335027 , pneumatic lower repair kit, part no. 344555 , pneumatic motor repair kit, part no. 344666 , pneu solenoid valve, part no. 350006 , follower plate, part no. 350503 , level indicator rod, part no. 350504 , fm 01 injector, part no. 400100 , zerk fitting, part no. 400127 , fm 01 injector repair kit, part no. 400175 , pneu vent valve, part no. 400400 , pneumatic vent valve repair kit, part no. 400475 , lubrication controller lc 02, part no. 400702 , air filter regulator unit frl, part no. 600020 , polyamide hose 8.4mm od 4mm id 50m, part no. 801001 , jaguar head repair kit, part no. 344888 , nylon piston, part no. 333038 , adaptor, part no. 333002 , brass bush, part no. 333003 , air motor piston shaft, part no. 333041 , elbow we 1 by 8m npt x 7 by 16 unf m, part no. 600119 , hose stud, part no. 600004 , hose sleeve, part no. 600005, as per nit
Agency / Dept :
northern coalfields limited NCL
Due Date :
Jun 12, 2026
Tender Value :
33.43L
View Documents
T18 Ref No : 16106082
Location : jammu , jammu & kashmir
Source : GEM Tenders
tender for coolant system for cnc , lubrication system for cnc , cnc controller panel , spindle motor for cnc , cutting tool for cnc
Agency / Dept :
indian army
Due Date :
Jul 15, 2026
Tender Value :
1.5L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15616461
Location : nagpur , maharashtra
Source : GEM Tenders
corrigendum tender for pump repair kit, part no. 241623 , clc 4400 controller, part no. 24b591 , polymide hose 8.4 mm od x 4 mm i.d 50mtr, part no. gha8404 , kit, installation, control module, part no. eec247538 , valve, 3 way solenoid, part no. eec115775 , valve, flow regulating, part no. eec115773 , valve, pressure reducing, part no. eec121206 , 3 point manifold, 3500 psi, part no. eec134363 , 4 point manifold, 3500 psi, part no. eec134364 , 5 point manifold, 3500 psi, part no. eec134365 , complete elbow fitting 1 by 8 npt, part no. eec60251 , ferrule 06l, part no. eec60252 , coupling nut m6, part no. eec60253 , hose stud for hose 8.4, part no. eec60254 , hose sleev polymate hose od 8.4mm, part no. eec60255 , stright fitting ge 06s, 1by8 bsp, part no. eec60256 , 06l str union, part no. eec60257 , kit dust cap, part no. eec60259 , pro shot grease dispense valave, part no. 242056, auto lubrication spares for be1000 hydraulic excavator, pump repair kit, part no. 241623, clc 4400 controller, part no. 24b591, polymide hose 8.4 mm od x 4 mm i.d 50mtr, part no. gha8404, kit, installation, control module, part no. eec247538, valve, 3 way solenoid, part no. eec115775, valve, flow regulating, part no. eec115773, valve, pressure reducing, part no. eec121206, 3 point manifold, 3500 psi, part no. eec134363, 4 point manifold, 3500 psi, part no. eec134364, 5 point manifold, 3500 psi, part no. eec134365, complete elbow fitting 1 by 8 npt, part no. eec60251, ferrule 06l, part no. eec60252, coupling nut m6, part no. eec60253, hose stud for hose 8.4, part no. eec60254, hose sleev polymate hose od 8.4mm, part no. eec60255, stright fitting ge 06s, 1by8 bsp, part no. eec60256, 06l str union, part no. eec60257, kit dust cap, part no. eec60259, pro shot grease dispense valave, part no. 242056
Agency / Dept :
western coalfields limited WCL
Due Date :
Jun 08, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16498578
Location : visakhapatnam , andhra pradesh
Source : GEM Tenders
tender for ew9092v-1071029 , ew9092v-1210002 , ew9092v- 060n1034 , ew9092v-061b1009 , ew9092v-07kt97r106 , ew9092v-084z5066 , ew9092v-1050004 , ew9092v- 1074029 , ew9092v-1210005 , ew9092v-1670001 , ew9092v-1670011 , ew9092v-1670021 , ew9092v-17- 1602-32x65 , ew9092v-1812036 , ew9092v-2230019 , ew9092v-24332 , ew9092v-24334 , ew9092v-24335 , ew9092v-3408326 , ew9092v-3500006 , ew9092v- 3974704 , ew9092v-4700053 , ew9092v-4701002 , ew9092v-4713047 , ew9092v-4714010 , ew9092v- 4740026 , ew9092v-92804855-jevi , ew9092v-bbm- actionair-a60 , ew9092v-bbm-sch-dlsw-osis , ew9092v-bg004800280z , ew9092v-cg8-dkc053-es2 , ew9092v-cn , ew9092v-cp-10-g-04-0050 , ew9092v- cv153-1 , ew9092v-deep-930c , ew9092v-deep-acp-06 , ew9092v-deep-md , ew9092v-g2r-2snd-24-dc , ew9092v-gt -2511 , ew9092v-gv2p08 , ew9092v-gv2p14 , ew9092v-hv-1500-001179f , ew9092v-mbs-5150- 060n1081 , ew9092v-mbs5100-2411-1038 , ew9092v- mbs5100-2611-1039 , ew9092v-mbt-5250-084z8066 , ew9092v-paba448765-p0214011 , ew9092v-pk-190-3-1 , ew9092v-sd , ew9092v-te511 , ew9092v-xb4ba21 , ew9092v-xb4bg41 , ew9092v-xb4bs8445, 25vx3c015, loctite 542(50cc), valve spring(for inlet system), pressure transmitter 0-4 bar type no mbs 5100-1611-1db04, pressure switch type no mbc 5100-2231-1db04, cpu di 32 do 16, ai8, a04, temprature transmitter type no-mbt 5410-000-060-000-g110, gas sealing ring(under cylinder head), o-ring i.d.129.54 w.5.33, inlet valve, nozzle(injector), joint washer, ring, d series metalastick, loctite 243(50cc), circuit braker 2p 2a, circuit breaker 2p-4a, circuit breaker 2p-6a, actuator, back-up ring, controller, pressure control valve, filter cartridge, filter paper, filter cartridge line(for lubricating oil filter), o-ring, pre heater 4.5 kw 3 415 v, air damper solenoid valves, door limit switch, nde ball bearing skf nu 328, automanual start switch 3 pos, c02 discharge nozzle with horn, engine display unit, stop solenoid 1, control module, hooter accept card, relay card for 6 relay, aux relay 2 pol 24vdc led+sp, gt -2511- h2s sensor (with transmitter), mpcb3 pol 2.5-4a, mpcb 3 pol 6-10 a, fil ter bag, pressure transmitter 0-1bar, pressure transmitter 0-25 bar, pressure transmitter 0-40 bar, temprature sensor, power supply module, dg fw cooler tube stack, photo electronic smoke detector withbase & wiring box, exhaust gas temperature sensor, push button 1 no, auto/man mode key, emergency stop
Agency / Dept :
indian navy
Due Date :
Aug 19, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16445998
Location : ernakulam , kerala
Source : GEM Tenders
tender for 26kkoc003 200 items ek3010b 0643601000 , ek3010b 1002207000 , ek3010b 1002505000 , ek3010b 10122050 , ek3010b 12005040 , ek3010b 26442801400 , ek3010b 2700557000 , ek3010b 2702322000 , ek3010b 2709943000 , ek3010b 2866326000 , ek3010b 2866325000 , ek3010b 3006710000 , ek3010b 3013830000 , ek3010b 3802211000 , ek3010b 5000310030 , ek3010b 5000606000 , ek3010b 5050285000 , ek3010b 5050403000 , ek3010b 5050807000 , ek3010b 5050810000 , ek3010b 5050814000 , ek3010b 5050851000 , ek3010b 7007587000 , ek3010b 7246450000 , ek3010b 7246550000 , ek3010b 7215201000 , ek3010b 7215213000 , ek3010b 7236130000 , ek3010b 7229535000 , ek3010b 7260005000 , ek3010b 7260018000 , ek3010b 7405007000 , ek3010b 7406509000 , ek3010b 7407706000 , ek3010b 7414406000 , ek3010b 7425412000 , ek3010b 7426023000 , ek3010b 7426506000 , ek3010b 7426505000 , ek3010b 7426619000 , ek3010b 7426616000 , ek3010b 7427117000 , ek3010b 7427124000 , ek3010b 7427251000 , ek3010b 7430304000 , ek3010b 7435221000 , ek3010b 7437976000 , ek3010b 7437849000 , ek3010b 7438133000 , ek3010b 7438136000 , ek3010b 7438170000 , ek3010b 7438164000 , ek3010b 7438182000 , ek3010b 7438511000 , ek3010b 7438678000 , ek3010b 7439817000 , ek3010b 7440501000 , ek3010b 7442102000 , ek3010b 7442378000 , ek3010b 7442377000 , ek3010b 7442376000 , ek3010b 7442345000 , ek3010b 7442375000 , ek3010b 7445816000 , ek3010b 7446602000 , ek3010b 7448350000 , ek3010b 7448804000 , ek3010b 7448450000 , ek3010b 7459137000 , ek3010b 7462669000 , ek3010b 7506890000 , ek3010b 7529536000 , ek3010b 7534508000 , ek3010b 7535201000 , ek3010b 7604618000 , ek3010b 7903480000 , ek3010b 79034800 , ek3010b 7903477000 , ek3010b 79036260 , ek3010b 7904006000 , ek3010b 7904121000 , ek3010b 7904115000 , ek3010b 79042220 , ek3010b 7904420000 , ek3010b 7904409000 , ek3010b 7904608000 , ek3010b 7904611000 , ek3010b 7904609000 , ek3010b 7904622000 , ek3010b 7904810000 , ek3010b 7906820000 , ek3010b 7907801000 , ek3010b 7907802000 , ek3010b 7907702000 , ek3010b 79077020 , ek3010b 7907807000 , ek3010b 7907806000 , ek3010b 7907925000 , ek3010b 7908705000 , ek3010b 7908820000 , ek3010b 7908706000 , ek3010b 79095020 , ek3010b 7909308000 , ek3010b 7909404000 , ek3010b 7910101000 , ek3010b 7910303000 , ek3010b 7911905000 , ek3010b 7914804000 , ek3010b 7916111000 , ek3010b 7916152000 , ek3010b 7935159000 , ek3010b 7942150000 , ek3010b 7942178000 , ek3010b 7952310000 , ek3010b 7951720000 , ek3010b 7966512000 , ek3010b 8102515000 , ek3010b 8107803000 , ek3010b 8130203000 , ek3010b 8130208000 , ek3010b 8130232000 , ek3010b 8130238000 , ek3010b 8171113000 , ek3010b 8171123000 , ek3010b ex 084 00 1 03 , ek3010b ex03100103 , ek3010b ex04500103 , ek3010b ex06000101 , es6031d 2703912000 , es6031d 5050881000 , es6031d 675360 pt407 , es6031d 7215213000 , es6031d 7232813000 , es6031d 7249457000 , es6031d 7430683000 , es6031d 7432635000 , es6031d 7432641000 , es6031d 7436801000 , es6031d 7437627000 , es6031d 7438667000 , es6031d 7447269000 , es6031d 7448713000 , es6031d 7534811000 , es6031d 7602723000 , es6031d 7602729000 , es6031d 7602807000 , es6031d 7602913000 , es6031d 7605679000 , es6031d 7604699000 , es6031d 7605678000 , es6031d 7605903000 , es6031d 7605904000 , es6031d 7607275000 , es6031d 7607603000 , es6031d 7690123000 , es6031d 7690134000 , es6031d 7690174000 , es6031d 7690192000 , es6031d 7690409000 , es6031d 7690408000 , es6031d 7690431000 , es6031d 7690426000 , es6031d 7690725000 , es6031d 7690913000 , es6031d 7690912000 , es6031d 7690909000 , es6031d 7690921000 , es6031d 7690918000 , es6031d 7900132000 , es6031d 7901215000 , es6031d 7902802000 , es6031d 7902801000 , es6031d 7902932000 , es6031d 79041190 7904119000 , es6031d 7904314000 , es6031d 7906819000 , es6031d 7906841000 , es6031d 7907707000 , es6031d 7914509000 , es6031d 7942150000 , es6031d 8102404000 , es6031d 8130239000 , es6031d 8169901000 , es6031d 8171011000 , es6031d 8171121000 , es6031d ex01100103 , es6031d ex02300103 , es6031d ex11700102 , es6031d ex12400102 , es6031d ex13300102 , es6031d pia603 , ek3010b 5050158000 , ek3010b 5050612000 , ek3010b 7650317000 , ek3010b, 26kkoc003 200 items, spin on filter for lubricating, spring decompression shaft, joint, v belt a 33, ring rubber top for push road tube, expansion bellow, oks 200 molykote, valve guide, valve exhaust, gfl nut, set bolt m27 item no 203, valve relief assy, thermometer with casing, water temp guage 3 6 cap 40 to 100 degree cls., screw set, nut for speed set screw, circlip 85 x 3, banjo bolt m12x1 5, washer copper, washer copper 16x22, inlet valve, exhaust manifold assembly bank, exhaust manifold assembly bank b, glacier filter gf 600 11, gasket for glacier filter gf600 11, ltwater system components, disc spring, spring pack 90 20 16 u, dowel dia 36 mm, ball bearing skf 6209, oil pump brg shell, joint cordon d7 21a7x110 cms, flexmast coupl pipe 88 9mm o d 096500v3 650, roller bearing skfnj 213, o ring, joint dia 184x240xep 2, o ring viton an65 60 c7, o ring ms29513 245 60c7 viton, bearing roller, flexmast conn gm10006 038 38 od pipe, level switch, couping flex mast 10011 4, gasket, flexmaster connection, flex hose dn20 l 1 m, flex hose dn 6 l 1 m, sleeve dn 100 pn 16, sleeve dn 65 pn 16, rubber compensative sleeve dn150 pn16, element for lo thermostat 63 71 deg c, set of gaskets for lub oil filter, shim injection, exp bellow, joint for balmo fuel feed pump, glanding, speed sensor 19050, back geared motor 415v 50hz, sealing cord, injection pump assly dia23 grad, injector assembly, starting air inlet connection, guide bush, cyclam seal assy, spacer, addesive super cyano 495, temperature sensor brg temp sensor, hydraulic motor for fuel filter, screw, nitrile cord, ring, o ring injector, connection, safty valve on cyl head, needle, barrel cap, thrust dv stopper bar, valve feed, serrated pin, oil seal 25x42x8, exhaust manifold lag, inlet manifold seal, joint flexible, bellow expansion 74507010, square joint, bs ring bsb d12 nse6 51 20a8, spring collar bar, sheathed injection pipe, o ring an 21 60c7 nse 6 5, sealing joint, safty valve deviation on fuel, oring an21 nse6 5 60c7, o ring for glacier filter, nut for shaft, strap for piston, spanner for connecting rod bolts, piston ring p3712, magnetic pickup sensor 19050, connection piece to turbocharger, flexible hose for sea water emd, flexible hose for ht water, flexible hose for balance water return, flexible hose for fuel leaks, safety stop electro distributor, stop memory, distributor iso 541 pneumatic spring, power switch, signal isolator 4 20ma 4 20ma 420ma loop powered, spool valve air operated 1 pilots location 16 18, set of gasket for hyd motor and diversion sect, copper washer 33x39, delivery pressure transmitter 0 6 bar, ball bearing for hyd motor, o ring idp 130 x 3up, bush dia 22 26 x 14, injector body, non return valve dn150 pn16 rk 86a, ball bearing for lube oil filter, flat gasket pn 40 dn65 t 1 5, single male union, o rind ms 29513 238 v 75 e, inlet valve guide, spring collar, exhaust valve, filter for pressure reducer of omd, set of gasket for hyd motor, scavenging air filter for omd, exhaust temperature sensor, sensor for exh temp tc, limit switch for gachot valve, joint type c with limiter, socket for relay, selector switch 3 positions withdra wal from centre 2no, rtd input field module type 170aai52040 slave 170fnti11001, distributor iso electro pneumatic spring, distributor iso electro pneumatic electric, air filter, solenoid valve safety stop, motor protection relay, frequency preamplifier t c speed, frequency preamplifier engine speed, rgm group safety card, temperature regulator fresh water, human machine interface, loctite 270, cam shaft nut, tappet for valve gear, guide piece f valve gear, cylinder head gasket, bush joint bush viton, o ring ann74 nse 6 5 60c7, cyclam seal, lipped seal, o ring for glacier filter gf600 11, hand held programmer unit with cable, flexible hose for fuel return, pressure guage range 0 6bar 4 dial type, thermostatic valve element 21 2 bocb15501 00 a, normal stop electro distributor, pressure transmitter 10 bar 24vdc o p 4 20 ma, pressure transmitter 6 bar 24vdc o p 4 20 ma, rtd converter, frequency divider turbo speed, engine controller, pressure switch 2 5 28 bar, circlip external, washer plain, channel plate gasket, engine inlet thermostic valve, gasket cylinder head, coupling holder, o ring no18 nse6 5 60c7, tool for cealing automizers holes
Agency / Dept :
indian navy
Due Date :
Aug 14, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15914143
Location : gangtok , sikkim
Source : GEM Tenders
tender for puf insulated hdpe water storage tank 500 ltr , puf insulated hdpe water storage tank 750 ltr , puf insulated hdpe water storage tank 2000 ltr , puf insulated ppr pipe of size 32 mm- pn 20, 3 layer, puf insulation-40mm thick , puf insulated ppr pipe 32 mm od with self regulating heat tape 35 watt per mtr and m 20 connectors ppr pipe - pn 20 , puf insulation - 40 mm. , puf insulated ppr pipe 20 mm od with self regulating heat tape 35 watt per mtr and m 20 connectors ppr pipe - pn 20 , puf insulation - 40 mm. , ppr elbow pn 20pipe 3 layer -32 mm size , ppr elbow pn 20pipe 3 layer -20 mm size , ppr tee pn 20pipe 3 layer -32 mm size , ppr tee pn 20pipe 3 layer -20 mm size , ppr union pn 20pipe 3 layer -32 mm size , ppr union pn 20pipe 3 layer -20 mm size , ppr half bend- 32 mm size , ppr half bend- 20 mm size , temperature differential controller for automatic on and off operation of heat tape , pt 100 sensor with 10 mtr signal wire , 3 core 1.5 sqmm copper wire , aluminum tape , 2.5 hp single phase open well submersible pump set complete , direct-on-line starter control panel for 2.5 hp single phase openwell submersible pump set, supply of materials, 500 litre capacity tank multi-layered hdpe tank with uv stabilized 100 food-grade virgin inner liner. pre insulated with high-pressure machine-injected minimum 40mm thick cfc-free rigid puf core insulation layer (density min 48 kg per qm). includes threaded self-locking lid with heavy-duty hexa-bolts to withstand extreme wind or snow loads. suitable for -40 degree c to 40 degree c thermal stability (max temp 0.5 degree or -0.5 degree over 6 hours)., 750 litre capacity tank multi-layered hdpe tank with uv stabilized 100 food-grade virgin inner liner. pre insulated with high-pressure machine-injected minimum 40mm thick cfc-free rigid puf core insulation layer (density min 48 kg per qm). includes threaded self-locking lid with heavy-duty hexa-bolts to withstand extreme wind or snow loads. suitable for -40 degree c to 40 degree c thermal stability (max temp 0.5 degree or -0.5 degree over 6 hours)., 2000 litre capacity tank multi-layered hdpe tank with uv stabilized 100 food-grade virgin inner liner. pre insulated with high-pressure machine-injected minimum 40mm thick cfc-free rigid puf core insulation layer (density min 48 kg per qm). includes threaded self-locking lid with heavy-duty hexa-bolts to withstand extreme wind or snow loads. suitable for -40 degree c to 40 degree c thermal stability (max temp 0.5 degree or -0.5 degree over 6 hours)., puf insulated ppr pipe of size 32 mm- pn 20, 3 layer, puf insulation-40mm thick 48 kg/cum dense, with outer protective layer of 3 mm pvc, puf insulated ppr pipe 32 mm od with self regulating heat tape (35 w/mtr) and m20 connectors for termination at both ends , ppr pipe - pn 20 , 3 layer , puf insulation - 40 mm, puf density 48 kg/cum with 3 mm thick outer pvc protective layer, puf insulated ppr pipe 20 mm od with self regulating heat tape (35 w/mtr) and m20 connectors for termination at both ends , ppr pipe - pn 20 , 3 layer , puf insulation - 40 mm, puf density 48 kg/cum with 3 mm thick outer pvc protective layer, ppr elbow (for pn 20pipe 3 layer)-32 mm size, ppr elbow (for pn 20pipe 3 layer)-20 mm size, ppr tee (for pn 20pipe 3 layer)-32 mm size, ppr tee (for pn 20pipe 3 layer)-20 mm size, ppr union (for pn 20pipe 3 layer)-32 mm size, ppr union (for pn 20pipe 3 layer)-20 mm size, ppr half bend- 32 mm size, ppr half bend- 20 mm size, temperature differential controller for automatic on/off operation of heat tape, programmable on below 10 degree c, cut off at 15 degree c. additional 2 pole 16a mcb for heating element load(manual operation), pt 100 sensor with 10 mtr signal wire, 3 core 1.5 sqmm pvc copper wire, aluminum tape for cladding of nitrile foam joints backing material thickened aluminium foil (typically reinforced for tear resistance and grid protection). adhesive layer high-polymer synthesis butyl rubber. total thickness ranges from 1.0 mm to 1.5 mm (with the aluminium layer typically 30 to 70 m). temperature range -40 degree c to 120 degree c (some specialized versions handle up to 260 degree c). elongation rate up to 1000 to accommodate surface expansion, contraction, and structural displacement. shelf life typically up to 12 months before application., supply of 2.5 hp single phase open well submersible pump set complete, suitable for operation on 220-240 volts, 50 hz ac supply, having motor output not less than 1.85 kw (2.5 hp), speed 2800-2900 rpm, fitted with 100 insulated copper winding, water cooled/oil cooled motor, capable of delivering discharge ranging from 50 to 100 lpm at total head varying from 100 m to 150 m. the pump shall be of single stage/two stage design as required, with discharge outlet size 32mm to 40 mm diameter. the pump set shall consist of high-grade stainless steel (ss) and cast iron (ci) body, corrosion resistant construction, stainless steel shaft, noryl/bronze/cast iron impeller, heavy duty water lubricated thrust bearings designed to withstand axial thrust loads and suitable mechanical seals. the pump and motor shall be mounted on a common shaft ensuring perfect alignment and efficient operation., supply of direct-on-line (dol) starter control panel for 2.5 hp single phase openwell/submersible pump set, suitable for operation on 220-240 volts, 50 hz ac supply, designed to handle full load current of 16-18 amperes, complete with heavy-duty contactor, thermal overload relay, single phasing protection, start and stop push buttons, capacitor start and capacitor run arrangement, indicating lamps, voltmeter, ammeter, mcb/mccb protection, terminal blocks, internal wiring, sheet steel enclosure duly powder coated, suitable for indoor/outdoor installation.
Agency / Dept :
indo tibetan border police ITBP
Due Date :
Jul 13, 2026
Tender Value :
5.14L
View Documents
T18 Ref No : 15914144
Location : gangtok , sikkim
Source : GEM Tenders
tender for puf insulated hdpe water storage tank 500 ltr , puf insulated hdpe water storage tank 750 ltr , puf insulated hdpe water storage tank 2000 ltr , puf insulated ppr pipe of size 32 mm- pn 20, 3 layer, puf insulation-40mm thick , puf insulated ppr pipe 32 mm od with self regulating heat tape 35 watt per mtr and m 20 connectors ppr pipe - pn 20 , puf insulation - 40 mm. , puf insulated ppr pipe 20 mm od with self regulating heat tape 35 watt per mtr and m 20 connectors ppr pipe - pn 20 , puf insulation - 40 mm. , ppr elbow pn 20pipe 3 layer -32 mm size , ppr elbow pn 20pipe 3 layer -20 mm size , ppr tee pn 20pipe 3 layer -32 mm size , ppr tee pn 20pipe 3 layer -20 mm size , ppr union pn 20pipe 3 layer -32 mm size , ppr union pn 20pipe 3 layer -20 mm size , ppr half bend- 32 mm size , ppr half bend- 20 mm size , temperature differential controller for automatic on and off operation of heat tape , pt 100 sensor with 10 mtr signal wire , 3 core 1.5 sqmm copper wire , aluminum tape , 2.5 hp single phase open well submersible pump set complete , direct-on-line starter control panel for 2.5 hp single phase openwell submersible pump set, supply of material, 500 litre capacity tank multi-layered hdpe tank with uv stabilized 100 food-grade virgin inner liner. pre insulated with high-pressure machine-injected minimum 40mm thick cfc-free rigid puf core insulation layer (density min 48 kg per qm). includes threaded self-locking lid with heavy-duty hexa-bolts to withstand extreme wind or snow loads. suitable for -40 degree c to 40 degree c thermal stability (max temp 0.5 degree or -0.5 degree over 6 hours)., 750 litre capacity tank multi-layered hdpe tank with uv stabilized 100 food-grade virgin inner liner. pre insulated with high-pressure machine-injected minimum 40mm thick cfc-free rigid puf core insulation layer (density min 48 kg per qm). includes threaded self-locking lid with heavy-duty hexa-bolts to withstand extreme wind or snow loads. suitable for -40 degree c to 40 degree c thermal stability (max temp 0.5 degree or -0.5 degree over 6 hours)., 2000 litre capacity tank multi-layered hdpe tank with uv stabilized 100 food-grade virgin inner liner. pre insulated with high-pressure machine-injected minimum 40mm thick cfc-free rigid puf core insulation layer (density min 48 kg per qm). includes threaded self-locking lid with heavy-duty hexa-bolts to withstand extreme wind or snow loads. suitable for -40 degree c to 40 degree c thermal stability (max temp 0.5 degree or -0.5 degree over 6 hours)., puf insulated ppr pipe of size 32 mm- pn 20, 3 layer, puf insulation-40mm thick 48 kg/cum dense, with outer protective layer of 3 mm pvc, puf insulated ppr pipe 32 mm od with self regulating heat tape (35 w/mtr) and m20 connectors for termination at both ends , ppr pipe - pn 20 , 3 layer , puf insulation - 40 mm, puf density 48 kg/cum with 3 mm thick outer pvc protective layer, puf insulated ppr pipe 20 mm od with self regulating heat tape (35 w/mtr) and m20 connectors for termination at both ends , ppr pipe - pn 20 , 3 layer , puf insulation - 40 mm, puf density 48 kg/cum with 3 mm thick outer pvc protective layer, ppr elbow (for pn 20pipe 3 layer)-32 mm size, ppr elbow (for pn 20pipe 3 layer)-20 mm size, ppr tee (for pn 20pipe 3 layer)-32 mm size, ppr tee (for pn 20pipe 3 layer)-20 mm size, ppr union (for pn 20pipe 3 layer)-32 mm size, ppr union (for pn 20pipe 3 layer)-20 mm size, ppr half bend- 32 mm size, ppr half bend- 20 mm size, temperature differential controller for automatic on/off operation of heat tape, programmable on below 10 degree c, cut off at 15 degree c. additional 2 pole 16a mcb for heating element load(manual operation), pt 100 sensor with 10 mtr signal wire, 3 core 1.5 sqmm pvc copper wire, aluminum tape for cladding of nitrile foam joints backing material thickened aluminium foil (typically reinforced for tear resistance and grid protection). adhesive layer high-polymer synthesis butyl rubber. total thickness ranges from 1.0 mm to 1.5 mm (with the aluminium layer typically 30 to 70 m). temperature range -40 degree c to 120 degree c (some specialized versions handle up to 260 degree c). elongation rate up to 1000 to accommodate surface expansion, contraction, and structural displacement. shelf life typically up to 12 months before application., supply of 2.5 hp single phase open well submersible pump set complete, suitable for operation on 220-240 volts, 50 hz ac supply, having motor output not less than 1.85 kw (2.5 hp), speed 2800-2900 rpm, fitted with 100 insulated copper winding, water cooled/oil cooled motor, capable of delivering discharge ranging from 50 to 100 lpm at total head varying from 100 m to 150 m. the pump shall be of single stage/two stage design as required, with discharge outlet size 32mm to 40 mm diameter. the pump set shall consist of high-grade stainless steel (ss) and cast iron (ci) body, corrosion resistant construction, stainless steel shaft, noryl/bronze/cast iron impeller, heavy duty water lubricated thrust bearings designed to withstand axial thrust loads and suitable mechanical seals. the pump and motor shall be mounted on a common shaft ensuring perfect alignment and efficient operation., supply of direct-on-line (dol) starter control panel for 2.5 hp single phase openwell/submersible pump set, suitable for operation on 220-240 volts, 50 hz ac supply, designed to handle full load current of 16-18 amperes, complete with heavy-duty contactor, thermal overload relay, single phasing protection, start and stop push buttons, capacitor start and capacitor run arrangement, indicating lamps, voltmeter, ammeter, mcb/mccb protection, terminal blocks, internal wiring, sheet steel enclosure duly powder coated, suitable for indoor/outdoor installation.
Agency / Dept :
indo tibetan border police ITBP
Due Date :
Jul 13, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15792767
Location : varanasi , uttar pradesh
Source : GEM Tenders
tender for o and m with aicmc of hvac and vrv system at varanasi airport title1 , title2 , title3 , title4 , title5 , title6 , title7 , title8 , title9 , title10 , title11 , title12 , title13 , title14 , title15 , title16 , title17 , title18 , title19 , title20 , title21 , title22 , title23 , title24 , title25 , title26 , title27 , title28 , title29 , title30 , title31 , title32 , title33 , title34 , title35 , title36 , title37 , title38 , title39 , title40 , title41 , title42 , title43 , title44 , title45 , title46 , title47 , title48 , title49 , title50, o and m with aicmc of hvac and vrv system at varanasi airport, operation and routine maintenance of water cooled chiller hvac system, 3x500tr i/c ahus and cooling tower, vrv system at various locations inside the terminal building and medical centre, various pumps and other installation of wtp and stp, ro, water coolers and split/tower/window ac units at various locations, water fountains inside the terminal building, ensuring serviceability/ satisfactory working condition of the systems i/c maintenance of records/logbook/ documents etc. on all days i/c saturday, sunday and holidays as per tender specifications, terms and conditions by supplying of following min. no. of man power- (a) supervisor (highly skilled) - 01 no. (i.e. 01 no. in general shift on 06 days in every week) (b) ac technician / mechanic (skilled) - 03 nos. (ie 01 no. round the clock on all days in every week for operation of chiller, reliever shall be provided on weekly off). (c) ac technician / mechanic (skilled) - 02 nos. (ie 02 no. in general shift on all days in every week for operation and routine maintenance of r.o., water coolers and split/tower/window ac units at various locations, reliever shall be provided on weekly off). (d) asst. ac mechanic cum operator (semi skilled) - 09 nos. (i.e. 01 no. round the clock for operation of ahu, 01 no. round the clock for operation and maintenance of wtp, 01 no. round the clock for operation of stp on all days in every week, reliever shall be provided on weekly off). (e) asst. ac mechanic cum operator (semi skilled) - 01 no. (i.e. 01 no. in general shift for maintenance of stp, reliever shall be provided on weekly off). (f) helper (unskilled) - 03 nos. (i.e. 01 no. round the clock on all days in every week for hvac, reliever shall be provided on weekly off). (g) helper (unskilled) - 02 nos. (ie 02 no. in general shift on all days in every week for operation and routine maintenance of ro, water coolers and split/tower/window ac units at various locations, reliever shall be provided on weekly off)., operation and routine maintenance of vrv system at ats cum technical block and precision air conditioning system at new mssr building including maintenance of records/logbook/ documents etc. on all days including saturday, sunday and holidays as per tender specifications, terms and conditions by supplying of following minimum number of man power - (a) supervisor (highly skilled) - 01 nos. (i.e. 01 no. in general shift on 06 days in every week) (b) ac technician / mechanic (skilled) - 01 nos. (i.e. 01 no. in general shift on all days in every week for operation and routine maintenance of vrv system at ats cum technical block and pac system at new mssr building, reliever shall be provided on weekly off). (c) asst. ac mechanic cum operator (semi skilled) - 06 nos. (i.e. 01 no. round the clock for operation and routine maintenance of vrv system in ats block and 01 no. round the clock for operation and routine maintenance of pac system at new mssr building on all days in every week, reliever shall be provided on weekly off)., operation and routine maintenance of packaged air conditioning system at old mssr building including maintenance of records/logbook/ documents etc. on all days including saturday, sunday and holidays as per tender specifications, terms and conditions by supplying of following minimum number of man power - (a) asst. ac mechanic cum operator (semi skilled) - 03 nos. (i.e. 01 no. round the clock for operation and routine maintenance of packaged air conditioning system at old mssr building on all days in every week, reliever shall be provided on weekly off)., annual all inclusive comprehensive maintenance contract of central ac plant (hvac) for 3x500tr (make- mcquay) centrifugal chiller type comprising of 3 no. cooling tower (make- advance) and 1no cooling tower (make- bell) with make-up tank, associated pumps as condenser water pump - 03 no(40hp), primary water pump - 03no (25hp), secondary water pump 12 hr - 03 no. (25hp), secondary water pump 24hr- 03 no. (15hp) with 06 no vfd with secondary pumps, hot water generator of 400kw (01 no) with in build panel for 8 zones , air handling unit (floor mounted) - 19 no. up to 100 tr and min 50tr capacity with 08 no vfds, ceiling suspended air handling unit - 17 no up to 3 to 5 tr with electrical starter panel in each hru 03 no of 4250 cmh, 4675 cmh, 2754 cmh with their electrical panels, ac risers - 82 no. with nozzles with respective ahus, ozone system of 06no of make- ruks canada ltd, electrical panel in plant room p1 , p2 and p3 for the operation of chillers, hot water generator and all associated pumps, water softening plant its electrical panel and pumps. above system complete including chiller pipe line, ac duct, grills diffusers, valves, gas charging, winding of motors, displays, instrumentations etc. complete as required related with hvac system. (the supply of consumable spares as mentioned in item-24 to 27 is not included in the scope of this item however installation and satisfactory working of equipment covers in this items.), annual comprehensive periodical maintenance of daikin make vrv system installed at new atc tower ,technical block and substation having total of 143 nos. vrv indoor units including ductable, high wall and cassette units of different capacities. total of outdoor units clubbed in 3 or 2 units together - 12 sets of total capacity of odu - 492 hp. maintenance work is inclusive of all spares required for repair, maintenance as per manufacturer schedule, servicing including routine preventive maintenance, breakdown maintenance including repair/replacement of compressor, electronic circuit board, mechanical equipment, safety controls and instrumentations, gas charging, fan , fan motors, thermal insulation, drain pumps, remote control console/units etc. ensuring serviceability/ satisfactory working condition of the system, maintenance of recordes/documentation etc. as per tender conditions covered under this contract on all days including saturday,sunday and holiday etc. as required., annual all inclusive comprehensive maintenance contract of 144hp vrv air-conditioning system installed in security hold area and passenger boarding bridge fixed finger (16hp - 09 set outdoor units model no-jrnu160lte5.apune, 4 tr- 16 set cassette type indoor units model number-jrnu48gtma4.apune, 6.3 tr - 04 set ductable type indoor units model number-jrnu76gb8a4.apune, makes-lg) including compressor and providing all necessary consumables, refrigerant gas, cu piping ,cabling etc., complete as per site requirement., annual all inclusive comprehensive maintenance contract of 20hp vrv air-conditioning system installed in airlines/aai offices in departure area inside terminal building (20hp - 01 set outdoor units model no- ivrfb-20th, 1.7 tr- 10 set cassette type indoor units model number-vlc-20, makes-bluestar) including compressor and providing all necessary consumables, refrigerant gas, cu piping, cabling etc., complete as per site requirement., annual comprehensive maintenance of following air-conditioners of different makes installed at different locations including providing and replacing all necessary consumables, spares including compressors and refrigerant etc. complete as required as per special condition including cmc of voltage stabilizers, wherever connected etc. as required. upto 1.5 tr window/split ac, annual comprehensive maintenance of following air-conditioners of different makes installed at different locations including providing and replacing all necessary consumables, spares, including compressors and refrigerant etc. complete as required as per special condition including cmc of voltage stabilizers, wherever connected etc. as required. (2tr split/cassette/tower ac), annual comprehensive maintenance of following air-conditioners of different makes installed at different locations including providing and replacing all necessary consumables, spares, including compressors and refrigerant etc. complete as required as per special condition including cmc of voltage stabilizers, wherever connected etc. as required. (3.0 tr split/tower type ac), annual comprehensive maintenance of water coolers of all type, makes and capacities with providing necessary consumables, spares, compressors and refrigerant etc. complete as required as per special condition including cmc of voltage stabilizers wherever connected etc. complete as required., annual comprehensive maintenance of water purifiers of aqua guard make including replacement of all defective components like uv lamp etc. and consumables and carrying out bimonthly servicing at installed position etc. complete as required.(the supply of consumable spares filters as mentioned in item no-40 is not included in the scope of this item however installation and satisfactory working of equipment covers in this items.), annual comprehensive maintenance of ro up to 50 liter capacity including replacement of all defective components and carrying out bimonthly servicing at installed position etc. complete as required. (the supply of consumable spares membrane and filters as mentioned in item no-39 and 40 is not included in the scope of this item however installation and satisfactory working of equipment covers in this items.), annual comprehensive maintenance of ro above 50 up to 100 liter capacity including replacement of all defective components and carrying out bimonthly servicing at installed position etc. complete as required. (the supply of consumable spares membrane and filters as mentioned in item no-39and40 is not included in the scope of this item however installation and satisfactory working of equipment covers in this items.), all inclusive comprehensive maintenance of 3 units each of 2x8tr capacity packaged air-conditioning plant installed at old mssr building (make - bluestar) including replacing defective components, carrying out preventive and breakdown maintenance like arresting of leakage, topping up of refrigerant gas, lubrication, rewinding/ replacing of all type of motors, repairing/ replacing of compressors, repairing / replacing of electrical components etc and other works required from time to time for proper maintenance of units including maintenance of records as per terms and condition all days including sundays and holidays., annual all inclusive comprehensive maintenance contract of 20hp vrv air-conditioning system installed at conference room and adjacent offices in terminal building including 2x 10hp outdoor units, 7x 2tr cassette type indoor units, make-daikin including compressor and providing all necessary consumables, refrigerant gas, piping, cabling etc., complete as per site requirement and special conditions and general terms and conditions of contract as required., annual all inclusive comprehensive maintenance contract of 36hp vrv air-conditioning system installed in passenger boarding bridge fixed link ( 1x 18 hp-02 set outdoor units model no-jrun180lls4, 4x 3tr-02set cassette type indoor units model number-rnu36gtna4, makes-lg) including compressor and providing all necessary consumables, refrigerant gas, cu piping, cabling etc., complete as per site requirement., annual all inclusive comprehensive maintenance contract of 40hp vrv air-conditioning system installed in passenger boarding bridge fixed finger (1x 20hp-02 set outdoor units model no-jrun200lls4, 4x 3tr-02set cassette type indoor units model number-jrnu36gtna4 , makes-lg) including compressor and providing all necessary consumables, refrigerant gas, cu piping, cabling etc., complete as per site requirement., annual all inclusive comprehensive maintenance contract of 36hp vrv air-conditioning system installed in new fire station medical centre ( 3x 12 hp outdoor units, model no.-map1206ht8d-xa,cassette type indoor units 9x 2 tr, model no.- mmu-up0241hp-e and 3x1.5 tr, model no.-mmu-up0181hp-e make-toshiba) including compressor and providing all necessary consumables, refrigerant gas, cu piping ,cabling etc., complete as per site requirement., annual all inclusive comprehensive maintenance contract of cold storage 40000 btu-02 set (make- bluestar) by providing quarterly visit and any number of break down as and when required including replacing/repairing compressor, condenser coil, temperature controller and providing all necessary consumables, refrigerant gas, cu piping ,cabling etc., complete as per site requirement., annual all inclusive comprehensive maintenance contract of 3 x 15 tr (3 sets each of 01 no. indoor unit and 02 no. outdoor units) floor mounted, bottom discharge, top suction, air cooled dx type crac precision air-conditioning system units installed in new mssr building suitable to maintain equipment room temperature at 18 deg c plus minus 2 deg c (1x 15 tr - 03 set indoor units model no-pdx px054d, 2 no. x 03 set outdoor units model number-hcr-43 , makes-vertiv) including compressor and providing all necessary consumables, refrigerant gas, cu piping ,cabling etc., complete as per site requirement., annual comprehensive maintenance of drinking water fountain with chilling water fountain one at higher level and another at lower level to match disability compliance make oasis/haws/wae including replacement of all defective components and carrying out bimonthly servicing at installed position etc. complete as required. (the supply of consumable spares membrane and filters as mentioned in item no-39 and 40 is not included in the scope of this item however installation and satisfactory working of equipment covers in this items.), cleaning of the solar module regularly two cycle in a month including minor repairing of tulu pump and monitoring of 600 kwp (500kwp+100kwp)grid connected roof top mounted solar photo voltaic power plant by deploying minimum one number unskilled man power in general shift excluding weekly off including maintaining records as per special conditions of the contract and as per direction of e-i-c. (consumables cleaning material like wiper duster, pvc flexible pipe etc. are to be provided by the agency. the solar module are under warrantee whereas inverter to be maintained by oem. the agency has to liaison with oem for repairing/replacement of defective parts)., supply of spares for hvac not include in cmc item no. 4 (pvc fills 600x300x150mm), supply of spares for hvac not include in cmc item no. 4 (resin 220 na(o) for softener plant), supply of spares for hvac not include in cmc item no. 4 (salt for softener plant), supply of spares for hvac not include in cmc item no. 4 (chlorine for dosing in stp), supply and installation of copper tubing of suitable size up to 3tr split air-conditioning for inlet and outlet of refrigerant gas complete with electrical cabling and insulation etc. complete as required during shifting of existing ac units., supply and installation of 20 mm dia pvc rigid drain pipe i/c all accessories like bends, couplers, tees etc. complete as required during shifting of existing ac units., supply and fixing of insulation of nitrile rubber in existing copper tubing for both inlet and outlet of existing installed air conditioner etc. complete as required during shifting of existing ac units as per direction of eic., dismantling of high wall split type air-conditioning unit, shifting, re-installation, testing and commissioning of capacity up to 3.00 tr air-conditioner units, fixing of existing refrigerant pipe, insulation and existing flexible copper conductor cable between evaporator and condenser units, topping up refrigerant gas etc. complete as required as per direction of eic., rewinding of 10/15 hp motor of submersible pump of (different stages ) different makes as per original size of insulated copper wire, sleeves complete with connection, interconnection etc as required., repairing of 10/15 hp submersible pump and motor (excluding rewinding of motor) of different stages and different makes i/c replacement of bearing bush, neck rings, bowl bush, running sleeve, key full, sand guard complete etc as required., repairing and rewinding of the existing water pump/ sewerage pump motor of capacity 0.75 hp to 3.0 hp by dismantling from its position, transportation to the work shop, bringing back to the airport after repairing and rewinding, reinstallation the same, including testing and make the system in serviceable condition as required., repairing and rewinding of the existing blower motor/ filtered feed pump etc. of capacity 5 hp to 7.5 hp by dismantling from its position, transportation to the work shop, bringing back to the airport after repairing and rewinding and reinstallation the same, including testing and make the system in serviceable condition as required., testing of stp incoming and treated water sample on quarterly basis from reputed govt. lab and submission of test reports as per technical specifications.(rate for each sample), dismantling, removal, lowering, reinstalling, testing and commissioning of submersible pumps of different makes and capacities including arranging of tripod stand, chain pulley block etc. as required., supply of 3.7 kw/ 5.0 hp submersible pump-motor set suitable for discharge 80mm delivery of minimum 250 lpm against static head 45mtr consisting of multistage pumps with suitable motor suitable for operation on 415 volt, 50 hz a/c supply. pumps and motors must be connected with alignment shafts etc. complete as required., supply of shield membrane which is not included in cmc of ro / water purifier / water fountains as mentioned in item no-13,14 and 22 suitable for kent/ aqua guard/oasis/haws/wae up to 100 liter capacity etc. complete as required., supply of carbon / sediment filter which is not included in cmc of ro / water purifier / water fountains as mentioned in item no-12,13,14 and 22 suitable for up to 100 liter capacity etc. complete as required., drinking water potability test quarterly basis as per technical specifications (rate for each sample)., supply of consumable urea for equalization tank of stp., supply of sand for sludge drying bed at stp., repairing/replacement of blower pipe tube at stp with suitable size pipe, elbow,socket and flange complete as required., supply of air blower filter at stp compatible to existing air blower., supplying, laying, fixing, testing and commissioning of ms class c chilled/ condenser water piping confirming to is 1239 part -ii of 1979 up to date with insulation and sand, cement mixture plastering and finishing complete with all necessary fittings such as bends, tees, reducers, flanges etc. and supports such as clamps, anti-vibration hangers etc. as per specification. 300 mm dia, supplying, laying, fixing, testing and commissioning of ms class c chilled/ condenser water piping confirming to is 1239 part- ii of 1979 up to date with insulation and sand, cement mixture plastering and finishing complete with all necessary fittings such as bends, tees, reducers, flanges etc. and supports such as clamps, anti-vibration hangers etc. as per specification. 250 mm dia, supplying, laying, fixing, testing and commissioning of ms class c chilled/ condenser water piping confirming to is 1239 part-ii of 1979 up to date with insulation and sand, cement mixture plastering and finishing complete with all necessary fittings such as bends, tees, reducers, flanges etc. and supports such as clamps, anti-vibration hangers etc. as per specification. 200 mm dia, supplying, laying, fixing, testing and commissioning of ms class c chilled/ condenser water piping confirming to is 1239 part-ii of 1979 up to date with insulation and sand, cement mixture plastering and finishing complete with all necessary fittings such as bends, tees, reducers, flanges etc. and supports such as clamps, anti-vibration hangers etc. as per specification. 150 mm dia, annual all inclusive comprehensive maintenance contract of 20hp vrv air-conditioning system installed at pm safe house including 2x 10hp outdoor units with 6 x 2 tr, 2 x 1.5 tr and 1 x 1.1 tr high wall type indoor units, make-hitachi including compressor and providing all necessary consumables, refrigerant gas, piping, cabling etc., complete as per site requirement and special conditions and general terms and conditions of contract as required.
Agency / Dept :
airports authority of india AAI
Due Date :
Jul 03, 2026
Tender Value :
2.07Cr
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15960729
Location : guwahati , assam
Source : GEM Tenders
tender for inspection1 , inspection2 , servicing of dea sets 15 kva to 25 kva , servicing of dea sets 30kva to 63 kva , servicing of dea sets above 63 kva , repairing of 12 volt battery charging alternator , repairing of 12 volt self starter motor of dg set , 1 supplying and fixing spare , 2 supplying and fixing spare , 3 supplying and fixing spare , 4 supplying and fixing spare , 5 supplying and fixing spare , 6 supplying and fixing spare , 7 supplying and fixing spare , 8 supplying and fixing spare , 9 supplying and fixing spare , providing and fixing fp mccb , 10 supplying and fixing spare , 11 supplying and fixing spare , 12 supplying and fixing spare , 13 supplying and fixing spare , 14 supplying and fixing spare , 15 supplying and fixing spare , 16 supplying and fixing spare , 17 supplying and fixing spare , 18 supplying and fixing spare , 19 supplying and fixing spare , 20 supplying and fixing spare , 21 supplying and fixing spare , replacement of sensor for controller based engine1, servicing of dg sets in dibrugarh ba assam, inspection of dea set upto 63 kva and control panel at site, inspection of dea set above 63 kva and control panel at site, draining out the existing burnt out lubricating oil replacement of lub oil lub oil filter and fuel filters, checking connection replacement of faulty diode assembly or voltage regulator up to 63 kva dea set, checking connection, replacement of faulty armature or bandage or field coil up to 63 kva dea set, coolant additive in radiator water, solid state avr oem or compatible one, smps battery charger bsnl approved make 120 va capacity, battery charging voltmeter bsnl approved make, battery charging ammeter bsnl approved make, lub oil pressure gauge, water temperature gauge, on start and stop key switch, charging lamp, 63a du100d thermal relay range 30 to 40 a, 16 sqmm multistrand pvc insulated copper conductor cable for battery leads, brass terminal for battery stud, 63 a four pole on load change over switch open execution, radiator fan belts, battery charging alternator fan belt, radiator cleaning and servicing from work shop, thread braided pvc fuel pipe for supply and return line including benjo connections, frequency meter digital 45hz to 55hz, ac voltmeter 0 to 500 volt, stop solenoid, starting battery 12 v 130 ah rating for dg above 15 kva including credit of old unusable battery, starting battery 12 v 88 ah rating for 15 kva to 20 kva dg set including credit of old unusable battery, lube oil, temperature
Agency / Dept :
bharat sanchar nigam limited BSNL
Due Date :
Jul 16, 2026
Tender Value :
7.16L
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Lubrication Controller. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Lubrication Controller sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Lubrication Controller Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Lubrication Controller, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Lubrication Controller Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Lubrication Controller Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Lubrication Controller.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Lubrication Controller depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Lubrication Controller Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Lubrication Controller bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Lubrication Controller. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Lubrication Controller, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Lubrication Controller, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Lubrication Controller?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Lubrication Controller tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Lubrication Controller?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Lubrication Controller, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Lubrication Controller is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All