sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

65Latest Liquid filling Tenders List

Latest Liquid filling Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Liquid filling tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Liquid filling tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Liquid filling Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Liquid filling tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Liquid filling Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Liquid filling Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Liquid filling Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Liquid filling tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Liquid filling Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Liquid filling sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Liquid filling tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Liquid filling tenders.

Is EMD mandatory for all Liquid filling tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Liquid filling work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Liquid filling tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Liquid filling Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17546815
Location : kasauli , himachal pradesh
Source : GEM Tenders
LIVE TENDER
tender for liquid filling machine
Agency / Dept :
department of health and family welfare DOHAFW
Due Date :
Oct 21, 2026 (6 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17720128
Location : budhni , madhya pradesh
Source : GEM Tenders
LIVE TENDER
tender for supply of the workshop mechanic tools - adjustable wrench , combination side cutting pliers , long e pliers , water pump pliers , locking pliers , flat screw driver , sockets set 22 sockets and 5 accessories , torque wrenches standard type , general purpose pipe wrenches , sledge hammer with handle , soft faced hammer with handle , double ended open jaw spanner sets , combination spanners set , octagonal chisels , center punch , allen key long ball point set , hand oil pump , grease gun , hydraulic bottle jack , side cutting plier , circlip pliers internal straight e , circlip pliers bent internal , circlip pliers external straight e , circlip pliers bent external e , slip joint pliers , two in one stubby screw driver , hammer with handle , club hammer with handle , tools trolley , strap filter wrench , round files smooth , half round file , square files , bearing pullers 3 leg , chisels with rubber grip , cantilever tool box , bearing puller 3 leg , ring spanner set , hacksaw frame , hacksaw blade , snap off cutter , t socket wrench , phillips screw driver , cordless battery powered impact wrench , piston ring compressor , piston ring expander , digital tire pressure gauge , feeler gauge set , water adopter for liquid filling into tractor tires , measuring tape , spring balance , engine compression gauge , tachometer rpm speed meter, least max opening 35 mm of reputed brand, 180 mm of reputed brand, 170 mm of reputed brand, 250 mm of reputed brand, 175 mm of reputed brand, 200 mm of reputed brand, 400 mm of reputed brand, 75 mm of reputed brand, 10 mm to 34 mm and 05 standard accessories of reputed brand, 50 to 220 mm of reputed brand, length 300 mm and opening 42 mm of reputed brand, 1350 gram of reputed brand, 30 mm mallet size of reputed brand, 6x7 to 30x32 mm of reputed brand, 6 mm to 32 mm of reputed brand, length 125 mm and cutting edge 9 mm of reputed brand, length 150 mm and cutting edge 16 mm of reputed brand, length 100 mm of reputed brand, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm of reputed brand, 375 cc of reputed brand, 450 cc of reputed brand, 3t of reputed brand, 160 mm of reputed brand, range 19 mm to 60 mm, length 195 mm of reputed brand, range 19 mm to 60 mm, length 180 mm of reputed brand, 150 mm of reputed brand, 30 mm of reputed brand, ball pein cross pein 340 g of reputed brand, 800 g of reputed brand, seven drawer 1025 mm h 455 mm width and 770 mm length of reputed brand, length 300 mm of reputed brand, length 200 mm and dia 8 mm of reputed brand, length 250 mm and dia 7 mm of reputed brand, length 150 mm of reputed brand, leg length 130 mm of reputed brand, length 250 mm and cutting edge 30 mm of reputed brand, size 155 x 200 x 450 of reputed brand, leg length 275 mm of reputed brand, 6x7 to 30x32 of reputed brand, 300 mm of reputed brand, double sided cutting 300x25x0.63 of reputed brand, blade width 19 mm of reputed brand, 10 mm of reputed brand, 12 mm of reputed brand, 13 mm of reputed brand, 17 mm of reputed brand, 2 battery 4.0 ah with charger, 12.7 mm of reputed brand, 53 to 175 mm of reputed brand, 4 inch of reputed brand, up to 100 psi of reputed brand, 0.5 mm to 1 mm of reputed brand, as per tractor wheel tube valve of reputed brand, 5 m length of reputed brand, capacity 5kg of reputed brand, 0 to 600 psi of reputed brand, contact and non-contact both option available, 2.5 to 19999 rpm of reputed brand
Agency / Dept :
ministry of agriculture and farmers welfare
Due Date :
Oct 30, 2026 (15 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17559361
Location : mayiladuthurai , tamil nadu
LIVE TENDER
tender for hydraulic testing, replacement of valves and filling of 900 kg liquid chlorine in empty cylinders for 2 nos including to and fro transporting charges of cylinders at kgtps maruthur
Agency / Dept :
tamil nadu electricity board TANGEDCO
Due Date :
Oct 15, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17701995
Location : new delhi , delhi
Source : GEM Tenders
LIVE TENDER
tender for echs gen dental materials - bio ceramic root canal sealer , hand piece lubricant spray bott of 500ml , protaper next niti rotary assorted set of 21 mm with including gp and paper points , protaper next niti rotary assorted set of 25 mm with including gp and paper points , prophylaxis paste jar of 300 to 500gm , surgeon masks disposable 3 ply , facial tissue for dental use pkt of 100 , dentin replacement material consisting of calcium silicate powder and calcium chloride liquid in box of 05 capsules and 2605 liquid tubes , endo z bur pkt of 05 , teeth polishing cups pkt of 10 , syringe hypodermic cartridge type needle 25mm pkt of 100 , syringe hypodermic cartridge type needle 27g pkt of 100 , dental bleaching kit , metal finishing bur pkt of 10 , relyx u 200 resin light cure cement , plaster of paris type ii , composite finishing kit , enhance finishing systems kit , formocresol for rct bottle of 10ml , modeling wax , rubber dam kit with complete set , mouth mirror tops without handle diameter 20 mm , bur diamond airotor interdental bur , abrasive mounted diamond bur flame shape , denture finshing bur , toefflemire matrix band retainer with bands , green stick pkt of 10 , impression compound pkt of 04 , paste impression pkt of two tubes containing zno base 125 165 and catalyst , material impression putty with light body , saliva tips pkt of 100 for dental use , pad abdominal swab 40x25cm with tape 30mm pkt of 10 , ultra sonic scaler tips , soldering torch , butane gas cylinder 220 to 250gm , fit and fissure sealant syringe of 1 to 3ml , edta gel for root canal preparation tube of 5 point 0gm , denture cleaner tablets pkt of 30 , poly carboxylate cement , radiopaque calcium hydroxide composition dycal , diamond bur for buccal reduction sf265r iso 021 an d020 , beautiful opaquer box of 2gm sygand needle tips x5 universal opaque uo pn 1363 , vaseline bott of 1kg , rapid repair cold cure acrylic repair material powder and liquid clear shade , beading and boxing wax , rapid repair cold cure acrylic repair material powder and liquid pink shade , diamond bur round ea40 iso 173 014 pkt of 05 , diamond bur pointed fissure ce15ef iso 173 014 pkt of 05 , diamond bur bulb fissure ce16ef iso 173 014 pkt of 05 , diamond bur long fissure ea13 iso 173 014 pkt of 05 , diamond bur straight fissure tc11 iso 173 014 pkt of 05 , relyx u ultimate adhesive resin cement , gauze absorbent folded 2 5cmx100mtr , patient bib for dental use , absorbent cotton gauze 120cmx18m for medical use , chlorhexidine gel tube of 15gm , gutta percha points 2 15 to 40 pkt of 120 , gutta percha points 4 15 to 40 pkt of 120 , gutta percha points 6 15 to 40 pkt of 120 , protaper paper points f1 , protaper paper points f2 , protaper paper points f3 , material temporary filling bott of 30 gms , bur surgical oral round tungsten carbide for straight hand piece pkt of 05 , bur surgical oral tapered tungsten carbide for straight hand piece pkt of 05 , flowable light cure composite material shade a2 syringe of 2gm , flowable light cure composite material shade a3 syringe of 2gm , flowable light cure glass ionomer cement , topical anesthetic spray bott of 100 gm , sterilization pouches size 3 point 5 x10 inch pkt of 200 , desensitizing tooth paste tube of 50 gms , isopropyl alcohol i p w v 70 bott of 1000 ml for sprit lamp , kidodent cavity shield toothpaste 60gms for kids , oral ulcer gel 10 gms , betadine germicide gargle 2 mint , desensitizing oral rinse bott of 100ml , micro applicator tips pack of 100 , cidex glutaraldehyde solution for disinfecting medical instruments 5 litres , instrument tray for pmt set , mta fillapex smart mix syringe 4 gm , sodium hypochloride2 for endodontic irrigation bott of 500ml , hydrogen peroxide solution with stabilizer ip bott of 500ml , normal saline bott of 500 ml , calcium hydroxide paste calcigel , articulating paper pkt of 10 , absorbent cotton rolls pkt of 500 , endo block , disposable rvg sensor sleeves pkt of 1000 , chlorhexidine digluconate solution bott of 13 ml for root canal disinfection , 3m espe filtek z250 xt restorative procedural kit , cloth glass polishing cloth size 24x24 inch pkt of 12 , kfile 21 mm 15 pkt of 6 , kfile 21 mm 20 pkt of 6 , kfile 21 mm 25 pkt of 6 , kfile 25 mm 15 pkt of 6 , kfile 25 mm 20 pkt of 6 , kfile 25 mm 25 pkt of 6 , silk black braided 30 reverse cutting 24 mm size pkt of 12 , universal selfetching bonding system 12 bottles of 46 ml with applicator tips , wooden wedge pkt of 100 , plastic wedge pkt of 100 , 3m espe filtek p60 posterior restorative a3 , gdc intra oral dental examination pmt set , denture adhesive powder bott of 1015 gms , gum paint bott of 15 ml , etchant gel syg of 24gms pack of 02 , soft liner liquid and powder gc , impression putty medium body , metapax pkt of two tubes , paper point 15 to 40 , fibre post with drill set , inj lignocaine hcl 2 percentage with, asperspecdoc
Agency / Dept :
indian army
Due Date :
Oct 29, 2026 (14 days left)
Tender Value :
27.11L
View Documents
T18 Ref No : 17720186
Location : belgaum , karnataka
Source : GEM Tenders
LIVE TENDER
tender for general dental expendables echs 2 - powder bott of 10 to15gm , lamp spirit brass wick , hand piece lubricant spray bott of 500ml to 600ml , mirror mouth plain glass fig 5 top for , disposable rvg sensor sleeves pkt of 1000 , articulating paper dental , patient bib plastic , calcium hydroxide with iodoform root canal dressing and filling paste in syringe of 2 to4gms , pit and fissure sealent syringe of 1 to 3ml , dental floss pkt of 50 , mta base root canal sealer pkt of 02 to 03gm , spray anesthetic surface bott of 100ml , syringe hypodermic cartridge type needle pre sterilized disposable pkt of 100 size 25mm , syringe hypodermic cartridge type needle pre sterilized disposable pkt of 100 size 35mm , polishing cup rubber mounted soft for rahp pkt of 12 , bur tapering fg diamond for crown and bridge no 847 by 012 , cement poly carboxylate kit consisting of powder and liquid spoon and mixing pad , dental restorative kit photo cure complete with 4 hybrid composite syringes shades 4 point5 gm each 1 bottle adhesive for dental by enamel 6ml tooth conditioner , disc polishing for complete snap on with medium coarse and fine grit pkt of 50 to 75with2to3 mandrill , gutta percha points 2 percent size 15 to 40 , gutta percha points 2 percent size 4 to 80 , set of hand niti files with corresponding g p points and paper points size 25mm , set of hand niti files with corresponding g p points and paper points size 21mm , lining cavity composite cal hyd based photo cure syringe of 5 to7gm with applicator tips , medicament root canal formacresole bott of 10to15ml , sol sod-hypochlorite 2 percent for endodontic irrigation bott of 500ml , matrix retainer ss ivory pattern band forpkt of 12 for molarb and pre molar , outfit matrix ss siqveland bands narrow , points absorbent root canal assorted box of 6 tube containing assorted sizes , root canal sealer paste for obturation consisting two tubes pre loaded syringe , universal self etchant cum bonding system sixth generation 1 to 2 bott of 4 to 6ml each with corresponding applicator tips , endodontic access bur set of 06 , k file ss size no 10 length 25 mm set of 6 , k file ss size no 15 to 40 length 25 mm set of 6 , k file size 15 to 40 length 21mm set of 06 , h file ss size no 15 to 40 length 21 mm set of 6 , composite finishing an polishing kit , cotton wool absorbent pkt of 500gm , gauze absorbent folded 1cm x 100m , gauze absorbent folded 3cm x 100m , rolls absorbent cotton dental assorted sizes box of 500 , silk braided size 3 by 0 70 to 76 cm rb 3by8 circle needle 45mm , polythene bags 5 kg capacity , normal saline 500 ml self collapsible pressure infusion having separate administration port , dologel 15g bott , disposable pmt set , intra dental brush pkt of 05 , gutta percha points size 15 to 40 4percent , gutta percha points size 15to40 6 percent , paper point 25 and 30 4 percent and 6 percent , protaper rotary files gold sx to f3 length 21mm , protaper rotary files gold sx to f3 length 25mm , gutta percha points f1f2f3 , bio ceramic root canal sealer , n95 mask , surface disinfectant spray , path finder files for rct , 2 percent chlorhexidine solution for root canal irrigation bott of 500ml , k file size 8 length 21mm set of 06 , k file size 8 length 25mm set of 06 , k file size 15 length 21mm set of 06 , k file size 15 length 25mm set of 06 , k file size 20 length 25mm set of 06 , k file size 20 length 21mm,set of 06 , k file size 25 length 25mm set of 06 , plugger root canal endodontic , spreader size 15 to 40 length 21mm set of 06 , k file size 10 length 21mm set of 06 , gutta percha points size no 25 and 30 6 percent, lignocaine hcl percent without adrenaline 30 ml, lignocaine hcl percent with adrenaline1by80000 30 ml inj, lignocaine hcl inj 2percent solution with adrenaline 1by80000 in 2ml solution pkt of 50, clotrimazole mouth paint, gum paint bott of 15ml, antiseptic mouthwash containing sodium fluoride and triclosan bott of 100ml, gel for root canal preparation containing water soluble lubricant edta urea hydrogen peroxide tube of 3point5 gm, clove oil bott of 50ml, desensitizing paste stannous fluoride or potassium fluoride or sodium mono fluro phosphate tube of 50gm, chorehexidine mouthwash 0point2percent bott of 100ml, triamcinalone acetate 1percent for oral use tube of 5 gm, 2propanol 45gm1propanol30gm ethyl hexadyl dimethyl ammonium ethyl sulphate 2gm with skin protecting substance 500ml bott with dispenser, alcohol, hydrogen peroxide for endodontic irrigation 2percent, povidone iodine solution 5percent bott of 500ml, antimrobial hand gel containing ethly alcohol 60 percentt plus cyclomethicone 12 to15alkyl lactate plus cetly lactate plus phenoxyethanol plus stearly alcohol with moisturizer bott of 500ml, knife bard parker blade size i fitting commercial no 11 pkt of 06, knife bard parker blade size i fitting commercial no 15 pkt of 06, needle suture cutting half circle triangular pointed pkt of 06, abrasive mounted diamond fg round 1point8mm, abrasive mounted diamond fg807 inverted cone 807by016, abrasive mounted diamond fg805 inverted cone 805 by018, abrasive mounted diamond fg 835 cylindrical 835 by012, abrasive mounted diamond fg 837 cylindrical 837 by 014, abrasive mounted diamond ra cylindrical 836 by014, antiseptic pain relieving gel, cloth glass polishing bleached cotton shite 01x 01 half mtr, denture adhesive powder bott of 10 to15gm, lamp spirit brass wick, hand piece lubricant spray bott of 500ml to 600ml, mirror mouth plain glass fig 5 top for, disposable rvg sensor sleeves pkt of 1000, articulating paper dental, patient bib plastic, calcium hydroxide with iodoform root canal dressing and filling paste in syringe of 2 to4gms, pit and fissure sealent syringe of 1 to 3ml, dental floss pkt of 50, mta base root canal sealer pkt of 02 to 03gm, spray anesthetic surface bott of 100ml, syringe hypodermic cartridge type needle pre sterilized disposable pkt of 100 size 25mm, syringe hypodermic cartridge type needle pre sterilized disposable pkt of 100 size 35mm, polishing cup rubber mounted soft for rahp pkt of 12, bur tapering fg diamond for crown and bridge no 847 by 012, cement poly carboxylate kit consisting of powder and liquid spoon and mixing pad, dental restorative kit photo cure complete consisting of 4 hybrid composite syringes of different shades 4 point5 gm each 1 bottle adhesive for dental by enamel 6ml 1 bottle tooth conditioner 6ml mixing pads spatula, disc polishing for complete snap on consisting of medium coarse and fine grit pkt of 50 to 75 dics with 2 to 3 mandrill, gutta percha points 2 percent size 15 to 40, gutta percha points 2 percent size 4 to 80, set of hand niti files with corresponding g p points and paper points size 25mm, set of hand niti files with corresponding g p points and paper points size 21mm, lining cavity composite cal hyd based photo cure syringe of 5 to7gm with applicator tips, medicament root canal formacresole bott of 10to15ml, sol sod-hypochlorite 2 percent for endodontic irrigation bott of 500ml, matrix retainer ss ivory pattern band forpkt of 12 for molarb and pre molar, outfit matrix ss siqveland bands narrow, points absorbent root canal assorted box of 6 tube containing assorted sizes, root canal sealer paste for obturation consisting two tubes pre loaded syringe, universal self etchant cum bonding system sixth generation 1 to 2 bott of 4 to 6ml each with corresponding applicator tips, endodontic access bur set of 06, k file ss size no 10 length 25 mm set of 6, k file ss size no 15 to 40 length 25 mm set of 6, k file size 15 to 40 length 21mm set of 06, h file ss size no 15 to 40 length 21 mm set of 6, composite finishing an polishing kit, cotton wool absorbent pkt of 500gm, gauze absorbent folded 1cm x 100m, gauze absorbent folded 3cm x 100m, rolls absorbent cotton dental assorted sizes box of 500, silk braided size 3 by 0 70 to 76 cm rb 3by8 circle needle 45mm, polythene bags 5 kg capacity, normal saline 500 ml self collapsible pressure infusion having separate administration port with recessed membrane and plastic sterility barrier self sealing inj port, dologel 15g bott, disposable pmt set, intra dental brush pkt of 05, gutta percha points size 15 to 40 4percent, gutta percha points size 15to40 6 percent, paper point 25 and 30 4 percent and 6 percent, protaper rotary files gold sx to f3 length 21mm, protaper rotary files gold sx to f3 length 25mm, gutta percha points f1f2f3, bio ceramic root canal sealer, n95 mask, surface disinfectant spray, path finder files for rct, 2 percent chlorhexidine solution for root canal irrigation bott of 500ml, k file size 8 length 21mm set of 06, k file size 8 length 25mm set of 06, k file size 15 length 21mm set of 06, k file size 15 length 25mm set of 06, k file size 20 length 25mm set of 06, k file size 20 length 21mm,set of 06, k file size 25 length 25mm set of 06, plugger root canal endodontic, spreader size 15 to 40 length 21mm set of 06, k file size 10 length 21mm set of 06, gutta percha points size no 25 and 30 6 percent contains 60 points, gutta percha points size 25, tapered diamond bur iso 198 by 018, daimond straight fissure bur sf 41, long straight daimond bur sf12 iso 111by014fc, material temporary filling no mix bott of 25 to 30gm
Agency / Dept :
indian army
Due Date :
Oct 30, 2026 (15 days left)
Tender Value :
3.99L
View Documents
T18 Ref No : 17761339
Location : lucknow , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for supply installation testing and commissioning of 250kva capacity continuous loading outdoor copper wound transformer , provisioning steel tubular pole , erection of steel tubular , brick work with common burnt clay , pdg 15 mm cement plaster , supplying and installaton m.s. cable trays , earthing with g.i. earth plate , providing and fixing g.i. pipe , providing and fixing g.i. strip , supplying and erection of 11 kv triple pole , supplying and erection of two lengths of channel iron , supplying and erection of 11 kv pin insulator , supplying and erection of 11 kv disc insulator , supplying and erection of lightning arrestor , pdg and fixing abc cable , pdg and fixing aluminium ht cables , pdg and fixing shrinkable ht cable , supply of following aluminium conductor armoured cable , supply gland and aluminium lugs , laying of one number xlpe power cable , in the existing masonry , on surface , on cable tray , pdg and fixing fencing , supply fixing fire extinguisher , pdg 6mtr length b class gi pipe pole , erection of metallic pole, supply installation testing and commissioning of 250kva outdoor transformer substation, supply installation testing and commissioning of 250 kva capacity bee 5 star rated as per bis amended, 11/0.433 kv step down, 3 phase, 50 hz, onan copper wound transformer electrolytic grade 99.9 percentage pure copper, core made of first crgo core grade moh or better, suitable for out door applications with offload tap changer on hv side with manual operation complete with all accessories and safety provisions as per relevant is code including first filling of filtered dehydrated oil, i/c supplying and grouting of suitable m.s. channel with all accessories and transformer shall be confirming to is 2026 part 1 to part 5, is 1180 and as per cpwd specifications complete in all respects etc as required at site. inside of tank shall be painted with varnish or liquid resistant paint. for external surfaces one coat of thermo setting powder paint or one coat of epoxy primer followed by two coats of polyurethane base paint shall be used. is 1180 part 3 shall be referred to for paint thickness for normal to medium corrosive atmosphere. fitting and accessories the following fittings shall be provided, a. two earthing terminals with the earthing symbol, b. oil level gauge indicating oil level at minimum, 30 degree c and maximum operating temperature, c. air release device for non sealed type transformers, d. rating and terminal marking plates, e. silica gel breather, f. drain cum sampling valve 3 by 4 inch nominal size thread, is 554 preferably steel with plug for three phase transformers, g. thermometer pocket with cap, applicable for special repair no h to s in atc, provisioning of 9 mtr height swaged type steel tubular pole confirming is 2713, duly pained suitable for 11kv supply complete with ms base plate etc as required, erection of steel tubular or rail pole strut in cement concrete 1 retio 3 retio 6, 1 cement 3 coarse sand 6 graded stone aggregate 40 mm nominal size foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required., brick work with common burnt clay modular bricks of class designation 7 point 5 in foundation and plinth in, a. cement mortar 1 ratio 4, 1 cement 4 coarse sand., pdg 15 mm cement plaster on the rough side of single or half brick wall of mix a. 1 ratio 4 , 1 cement 4 fine sand, supplying and installaton 300 mm width x 50 mm depth x 1 point 6 mm thickness of perforated painted with powder coating m.s. cable trays with perforation not more than 17point5 percetage, in convenient sections, joined with connectors, suspended from the ceiling with two numbers ms/gi suspenders i/c base of suitable size ms/gi angle, bolts and nuts, painting uspenders, fastener etc as required., earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required., providing and fixing 25 mm x 5 mm g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut, bolt, spring, washer excavation and re filling etc. as required., providing and fixing 25 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required., supplying and erection of 11 kv triple pole suitable capacity gang operated air break switch 6 insulator, 3 pc. set complete with 25 mm dia. 3m long operating pipe, lock and handle etc. as reqd., supplying and erection of two lengths of channel iron 75 mm x 40 mm x 6 mm 7.14 kg per metre double pole cross arm for three wire 11kv over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm x 6 mm m.s. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc as per drawing and painting with primer and finish paint as required., supplying and erection of 11 kv pin insulator complete with large steel head g.i. pin, nuts, washers etc. as required., supplying and erection of 11 kv disc insulator for 11 kv over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required., supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 kv overhead lines with rated voltage 9 kv rms with a nominal discharge current rating of 5 ka and complete with galvanised clamping arrangement, g.i. bolts, nuts, washers etc. as required., pdg/ fixing abc cable of 11 kv grade with fresh aerial bunched power cable abc cable of 11 kv grade of size 3 core x 35 sq. mm. aluminum conductor cross linked polyethylene insulated xlpe individual core screened a/w load bearing messenger conductor 25 sq mm , confirming to iec 60502 part 1 complete with laying as per site requirement isi., pdg/ fixing 3core 95sq.mm 11kv grade aluminium ht cables, stranded compacted circular aluminium conductor, conductor screen with extruded semi conducting compound, xlpe insulated, insulation screening with extruded semi conducting compound in combination with copper tape, cores laid up, innersheath of pvc, galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is 7098 part 2 2011 with upto date amendments., pdg and fixing 11kv rating heat shrinkable ht cable termination kit suitable of 3core 95 sq.mm ht cable complete with lugs etc as required m/s raychem / ss make, supply of following size of pvc insulated pvc sheathed 1.1 kv grade aluminium conductor unarmoured/ armoured cable confirming to relevant is specification etc complete as reqd. make bsnl approved make. a. 3.5 x 120sqmm armoured, supplying and making end termination with brass compression gland and aluminium lugs for following size of existing pvc insulated and pvc sheathed/xlpe aluminium conductor cable of 1 point 1 kv grade as required, a. 3 point 5 x 120 sq mm., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of size bove 95 sq. mm and upto 185 sq. mm in following manners. a. in the existing rcc/ hume/ metal pipe, b. in the existing masonry open duct, c. laying on surface, d. laying on existing cable tray, pdg and fixing fencing all around transfomer made out of suitable size ms angle iron, ms flat iron, min 3mm dia wire mesh/ jali with provision of lockable gate with in fencing complete as reqd., s/fixing 4.5kg co2 type fire extinguisher with 1.5mtr hose and horn complete as required. isi marked, pdg 6mtr length b class 50mm dia gi pipe pole complete with all accessoroies including s/f of socket, suitable size base plate at bottom etc i/c cutting, threading complete as required., erection of metallic pole of following length in cement concrete 1 ratio 3 ratio 6, 1 cement 3 coarse sand 6 graded stone aggregate 40 mm nominal size foundation including excavation and refilling etc. as required. a. above 4 point 5 meter and upto 6 point 5 meter
Agency / Dept :
bharat sanchar nigam limited BSNL
Due Date :
Nov 03, 2026 (19 days left)
Tender Value :
19.59L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17684650
Location : leh , ladakh
Source : GEM Tenders
LIVE TENDER
tender for providing and replacement of glycol motor seal and bearing per direction of engineer incharge, including deduction of cost of old unserviceable motor seal , servicing and rewinding of 7.50 hp monoblock motor including providing , providing and replacement of fan coil unit connection pipe nipple size 1inch as per direction of engineer incharge , rewinding of fan coil unit motor with neccessory repair whichever will required during the servicing, labour charges and proper testing of functioning of motor , providing and servicing of f.cu air filter as per direction of engineer incharge , servicing of burner including required deep cleaning up to satisfactory mark as per direction of engineer incharge , providing and replacement of burner nozzle as per direction of engineer incharge, , providing and replacement of burner on off switch as per direction of engineer incharge, , supplying of filling of glycol as per direction of engineer incharge , providing and replacement pressure gauge as per direction of engineer incharge, including deduction of cost of old unserviceable pressure gauge , providing and replacement photo cell as per direction of engineer incharge, including deduction of cost of old burnt photo cell , providing and replacement brass gate valve 25mm as per direction of engineer incharge, including deduction of cost of old unserviceable brass gate valve 25mm , providing and replacement sequence controller as per direction of engineer incharge, including deduction of cost of old unserviceable sequence controller , providing and replacement burner ignition transformer as per direction of engineer incharge, including deduction of cost of old unserviceable burner ignition transformer , providing and replacement burner fuel pump as per direction of engineer incharge, including deduction of cost of old unserviceable burner fuel pump , servicing and repair of motor starter as per direction of engineer incharge, including deduction of cost of old unserviceable materials , providing and replacement of f.c.u with radiator panel as per direction of engineer incharge, including deduction of cost of old unserviceable heating blower unit , rejointing the chp heat liquid carrying pipe by repairing pipe jointing with appropriate material etc as per direction of engineer incharge. , servicing and rewinding of 0.5 hp monoblock motor pump including providing and fixing copper wire , providign insulation of nitrile rubber insulation tube of wall thickness 06-10 mm for 80-110 mm dia pipes , providign insulation of nitrile rubber insulation tube of wall thickness 06-10 mm for 15-25 mm dia pipes, arm chp 2026 27 16th bn, providing and replacement of glycol motor seal and bearing per direction of engineer incharge, including deduction of cost of old unserviceable motor seal ( note- old scrap material held with vender after replacement )., servicing and rewinding of 7.50 hp monoblock motor including providing and fixing of 7 kg, copper wire, warnish 01 ltr, slive mix 20 pcs, paper p class 01 set, paper p sheet 01 set, solding wire 01 set, brearing 02 nos, cotton tape 01 nos, dr tape 01 nos, thimbles 01 set, with neccessory repair whichever will required during the servicing/ labour charges and proper testing of functioning of motor after servicing on load as per direction of engineer incharge, including deduction of cost of old burnt copper wire ( note- old scrap material held with vender after replacement )., providing and replacement of fan coil unit connection pipe nipple (size 1inch) as per direction of engineer incharge, including deduction of cost of old unserviceable coil unit connection pipe nipple (size 1inch) ( note- old scrap material held with vender after replacement )., rewinding of fan coil unit motor with neccessory repair whichever will required during the servicing/ labour charges and proper testing of functioning of motor after servicing on load as per direction of engineer incharge, including deduction of cost of old burnt copper wire ( note- old scrap material held with vender after replacement )., providing and servicing of f.cu air filter as per direction of engineer incharge, servicing of burner including required deep cleaning up to satisfactory mark as per direction of engineer incharge, providing and replacement of burner nozzle as per direction of engineer incharge, including deduction of cost of old unserviceable burner nozzle ( note- old scrap material held with vender after replacement )., providing and replacement of burner on/off switch as per direction of engineer incharge, including deduction of cost of old unserviceable burner on/off switch ( note- old scrap material held with vender after replacement )., supplying of filling of glycol as per direction of engineer incharge, providing and replacement pressure gauge as per direction of engineer incharge, including deduction of cost of old unserviceable pressure gauge ( note- old scrap material held with vender after replacement )., providing and replacement photo cell as per direction of engineer incharge, including deduction of cost of old burnt photo cell ( note- old scrap material held with vender after replacement )., providing and replacement brass gate valve 25mm as per direction of engineer incharge, including deduction of cost of old unserviceable brass gate valve 25mm ( note- old scrap material held with vender after replacement )., providing and replacement sequence controller as per direction of engineer incharge, including deduction of cost of old unserviceable sequence controller ( note- old scrap material held with vender after replacement )., providing and replacement burner ignition transformer as per direction of engineer incharge, including deduction of cost of old unserviceable burner ignition transformer ( note- old scrap material held with vender after replacement )., providing and replacement burner fuel pump as per direction of engineer incharge, including deduction of cost of old unserviceable burner fuel pump ( note- old scrap material held with vender after replacement )., servicing and repair of motor starter as per direction of engineer incharge, including deduction of cost of old unserviceable materials ( note- old scrap material held with vender after replacement )., providing and replacement of f.c.u with radiator panel as per direction of engineer incharge, including deduction of cost of old unserviceable heating blower unit ( note- old scrap material held with vender after replacement )., rejointing the chp heat liquid carrying pipe by repairing pipe/jointing with appropriate material etc as per direction of engineer incharge., servicing and rewinding of 0.5 hp monoblock motor pump including providing and fixing copper wire, and bearing set with neccessory repair whichever will required during the servicing/ labour charges and proper testing of functioning of motor after servicing on load as per direction of engineer incharge, including deduction of cost of old burnt copper wire ( note- old scrap material held with vender after replacement )., providign insulation of nitrile rubber insulation tube of wall thickness 06-10 mm for 80-110 mm dia pipes including removing damaged insulation and applying new nytril insulation and with jointing ss sheet scering as per direction of engineer in charge., providign insulation of nitrile rubber insulation tube of wall thickness 06-10 mm for 15-25 mm dia pipes including removing damaged insulation and applying new nytril insulation and with jointing ss sheet scering as per direction of engineer in charge.
Agency / Dept :
indo tibetan border police ITBP
Due Date :
Oct 30, 2026 (15 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16664854
Location : kasauli , himachal pradesh
Source : GEM Tenders
corrigendum tender for liquid filling machine
Agency / Dept :
department of health and family welfare DOHAFW
Due Date :
Aug 13, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16800016
Location : krishna , andhra pradesh
auction of machinary, 1. ss mixing (formulation) tanks with stirrers and motor, cap:3500ltrs-1 no: 2000ltrs-2 nos. make: naaz industries. 2. liquid filling machine, make: super pack. 3. auto vad sealing machinemake: electronics devices, 4. electronic weighing scales cap: 300kgs: make: contech, 5. pedestal fans-750mm dia make: almonard 6. ss salt conveyor with motors make: super pack. 7. s.s. gear pump with motor 8. ropp cap sealing machine model: pack-equip: make; sunbim 9. semi auto seaming machine make: timaco. 10. ultra labelling machine. 11. shrink wrapping machine make: taaz industries. 12. plastic strapping machine model: mst: make: itw signode. 13. supporting structure for machinery, 14. platform scale cap: 300kgs: make: avery. 15. granular mixture machine make: taaz industries 16. pulverizer assembly with blender make: taaz industries 17. drum lifting chain pulley 18. drum trolley & drum lifter 19. sieve shaker with motor 20. air compressors 21. dg set 30kva cap, 22. solvent storage tanks, 23. solvent transfer pump with motor 24. counter scales 25. electrical transformer, electrical cables, control panels, fittings etc, 26. lab equipment, 27. furniture, fixtures, computers, ac machines, 28. auto powder filling machine (2014)
Agency / Dept :
bank of india BOI
Due Date :
Aug 31, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16800019
Location : vijayawada , andhra pradesh
auction of industrial land & building, 1. ss mixing (formulation) tanks with stirrers and motor, cap:3500ltrs-1 no: 2000ltrs-2 nos. make: naaz industries. 2. liquid filling machine, make: super pack. 3. auto vad sealing machinemake: electronics devices, 4. electronic weighing scales cap: 300kgs: make: contech, 5. pedestal fans-750mm dia make: almonard 6. ss salt conveyor with motors make: super pack. 7. s.s. gear pump with motor 8. ropp cap sealing machine model: pack-equip: make; sunbim 9. semi auto seaming machine make: timaco. 10. ultra labelling machine. 11. shrink wrapping machine make: taaz industries. 12. plastic strapping machine model: mst: make: itw signode. 13. supporting structure for machinery, 14. platform scale cap: 300kgs: make: avery. 15. granular mixture machine make: taaz industries 16. pulverizer assembly with blender make: taaz industries 17. drum lifting chain pulley 18. drum trolley & drum lifter 19. sieve shaker with motor 20. air compressors 21. dg set - 30kva cap, 22. solvent storage tanks, 23. solvent transfer pump with motor 24. counter scales 25. electrical transformer, electrical cables, control panels, fittings etc, 26. lab equipment, 27. furniture, fixtures, computers, ac machines, 28. auto powder filling machine(2014)
Agency / Dept :
bank of india BOI
Due Date :
Aug 31, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Liquid Filling. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Liquid Filling sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Liquid Filling Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Liquid Filling, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Liquid Filling Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Liquid Filling Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Liquid Filling.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Liquid Filling depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Liquid Filling Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Liquid Filling bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Liquid Filling. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Liquid Filling, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Liquid Filling, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Liquid Filling?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Liquid Filling tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Liquid Filling?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Liquid Filling, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Liquid Filling is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All