sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

7Latest Industrial strainer Tenders List

Latest Industrial strainer Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Industrial strainer tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Industrial strainer tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Industrial strainer Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Industrial strainer tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Industrial strainer Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Industrial strainer Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Industrial strainer Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Industrial strainer tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Industrial strainer Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Industrial strainer sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Industrial strainer tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Industrial strainer tenders.

Is EMD mandatory for all Industrial strainer tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Industrial strainer work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Industrial strainer tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Industrial strainer Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16835341
Location : rawatbhata , rajasthan
Source : GEM Tenders
NEW TENDER
tender for industrial strainer (q3)
Agency / Dept :
nuclear power corporation of india limited NPCIL
Due Date :
Sep 09, 2026 (21 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16763228
Location : sundarnagar , himachal pradesh
Source : GEM Tenders
LIVE TENDER
tender for industrial strainer (v2) (q3)
Agency / Dept :
bhakra beas management board BBMB
Due Date :
Aug 24, 2026 (5 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16639046
Location : coimbatore , tamil nadu
Source : GEM Tenders
LIVE TENDER
tender for item 1 , item 2 , item 3 , item 4 , item 5 , item 6 , item 7 , item 8 , item 9 , item 10 , item 11 , item 12 , item 13 , item 14 , item 15 , item 16 , item 17 , item 18 , item 19 , item 20 , item 21 , item 22 , item 23 , item 24 , item 25 , item 26 , item 27 , item 28 , item 29 , item 30 , item 31 , item 32 , item 33 , item 34 , item 35 , item 36 , item 37 , item 38 , item 39 , item 40 , item 41 , item 42 , item 43 , item 44 , item 45 , item 46 , item 47 , item 48 , item 49 , item 50 , item 51 , item 52 , item 53 , item 54 , item 55 , item 56 , item 57 , item 58 , item 59 , item 60 , item 61 , item 62 , item 63 , item 64 , item 65 , item 66 , item 67 , item 68 , item 69 , item 70 , item 71 , item 72 , item 73 , item 74 , item 75 , item 76 , item 77 , item 78 , item 79 , item 80 , item 81 , item 82 , item 83 , item 84 , item 85 , item 86 , item 87 , item 88 , item 89 , item 90 , item 91 , item 92 , item 93 , item 94 , item 95 , item 96 , item 97 , item 98 , item 99 , item 100 , item 101 , item 102 , item 103 , item 104 , item 105 , item 106 , item 107 , item 108 , item 109 , item 110 , item 111 , item 112 , item 113 , item 114 , item 115 , item 116 , item 117 , item 118 , item 119 , item 120, supply of electrical spares, 1600a main moving contacts, cat ref. no. 16d / 16n, movmain 16d, for c&s make acb aha series, 2500 a main isolating contacts (jaw contacts), cat ref. no. 25d / 25n-30s, cs-mic-25d, set of 2, for c&s make acb aha series, 1600 a main isolating contacts (jaw contacts), cat ref. no. 16d / 16n, cs-mic-16d, set of 2, for c&s make acb aha series, 4pole 1600 a arcing contacts, , cat. ref. no. 16d / 16n, cs-arccont-16d, (set of 1 no. fixed 1 no. moving), for c&s make acb aha series, 2500 a acb pole separator (barrier), cat no. pole-septr-20-25, for c&s make acb aha series, 36 way set of three contact block on acb side & six block on cradle side, cat. ref. no. 6d-16d/06n-20s, 4p, cs-aih-3-116 (4p), for c&s make acb aha series, 36 way set of three contact block on acb side & six block on cradle side, cat. ref. no. 20d-25d/25n-30s, 4p, cs-aih-3-220 (4p), current transfomer 1600/0.2 a, cat. ref. no. cs-wmct-164, cs-atbwm-160, for c&s make acb aha series, current transformer 2500/0.2 a, cat. ref. no. cs-wmct-164, cs-atbwm-225 for c&s make acb aha series, shunt trip coil cat. ref. no. 6d-16d /08n 208 & 20d -40d/30s-40s (aha), cs-avh-s-220-xx for c&s make acb aha series, closing coil cat. ref. no. 6d-16d /08n-20s ( aha ) & 20d -40d/30s-41s (aha), cs-avh-c-220-xx for c&s make acb aha series, uv coil ct. ref. no. 6d-16d/06n-20s, cs-auh-v-a-xx for c&s make acb aha series, uv coil cat. ref. no. 20d-40d/25n-40s / 50c-60c , cs-auh-v-b-xx, for c&s make acb aha series, 1600a , 4p frp shutter assebly 6d-16d / 06n-16n, 4 pole, cat. ref. no. ash-1 (4p), for c&s make acb aha series, 2500a , 4p frp shutter assebly 20d-25d/30s, 4 pole cat. ref. no. ash-2 (4p), for c&s make acb aha series, auxillary switch 14 way (7no+7nc) cat. ref. no. 6d-16d/06n-20s cs-axh-7a7b-116, for c&s make acb aha series, auxillary switch 14 way cat. ref. no. 20d-40d/25n-40s / 50c-60c cs-axh-7a7b-22 0, for c&s make acb aha series, arc chutes cat. ref. no. 25d/30s, cs-arccht-25d, for c&s make acb aha series, arc chutes cat. ref. no. 6d-16d/06n-20n, cs-arccht-06d-16d, for c&s make acb aha series, 1600a/2500a closing latch for c&s make acb aha series, micro switch for motor cut off 6d-40d/06n-40s /50c-60c, model- microsw, for c&s make acb aha series, 2500 a trip shaft, for c&s make acb aha series, 1600 a trip shaft, for c&s make acb aha series, supply of c&s make acb, ah-25d 4p edo with micropro-5.1t with complete set, communication module for micropro 4.1/5.1 release. model- cspscm-micropro for c&s make acb aha series, c-power acb 1000a uv coil, 240v, 50hz ac for l&t make, model- sl92720b000, c-power acb 1000a shunt coil, 240v, 50hz ac for l&t make, model- sl927180b00, c-power acb 1000a closing coil, 240v, 50hz ac for l&t make, supply of 3 phase multi function meter rishi master 3440 with support rs port 485., 100 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse1m125atm4p-x., 125 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse1m125atm4p-x, 160 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse2m250atm4p-x, 200 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse2m250atm4p-x, 63 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv510345., 125 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv516342, 160 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv516343, 200 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv525342, 250a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv525343, 400a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv540309, 10kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4102j040 complete as required., 20kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4202j040 complete as required., 25 kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4252j040 complete as required., cylindrical hrc fuse links type hf of rating 63 amps, make- - l&t, cat no- - sf90159, or equivalent, cylindrical hrc fuse links type hf of rating 40 amps, make- - l&t, cat no- - sf90143, or equivalent, cylindrical hrc fuse links type hf of rating 32 amps, make- - l&t, cat no- - sf90142, or equivalent, cylindrical hrc fuse links type hf of rating 16 amps, make- - l&t, cat no- - sf90150, or equivalent, off set clip in type fuse links type hbc of rating 2 amps, type- cns, iec 269,, off set clip in type fuse links type hbc of rating 4 amps, type- cns, iec 269,, off set clip in type fuse links type hbc of rating 6 amps, type- cns, iec 269,, 63a on-load changeover switch (manual) in sheet steel enclosure, suitable for switching between two power sources (mains and standby supply), with ac-23a utilization category, 4 pole, suitable for 415v, 50hz, three-phase system., supply of 32a motor protection circuit breaker (mpcb), suitable for three-phase motor protection, with adjustable thermal overload and magnetic short-circuit protection, conforming to relevant is/iec standards., 1.5 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (fr-lsh) grade wires suitable for domestic and industrial purpose (each - 90 mtrs. coil), 2.5 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (frls) grade wires suitable for domestic and industrial purpose (each - 90 mtrs. coil), 4 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (fr-lsh) grade wires suitable for domestic and industrial purpose(each - 90 mtrs. coil), 2 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment)-(each - 100 mtrs. coil), 3 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 3 core 2.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 3 core 4 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment)- (each - 100 mtrs. coil), 8 core 1.0 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 4 core 2.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 6 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), category 6 (cat6) utp lan cable, 4-pair, 23 awg electrolytic grade solid annealed bare copper conductor, hdpe insulated, overall pvc/lszh sheathed, conforming to tia/eia-568-c.2 and iso/iec 11801, suitable for data transmission up to 1 gbps and 250 mhz frequency, complete as required. (each - 100 mtrs. coil), miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. sp mcb, 16 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. dp mcb, 25 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. dp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. tp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp mcb, 63a, c curve, isolator having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp isolator, 100a, 5 pin, 32a, 220-440vac, industrial panel socket with plug ip44 waterproof plug socket male female connector (plug & socket), 6 amps modular one way switch of make- - legrand, model- - myrius, cat no- - 6792 00 or equivalent, 16 amps modular one way switch of make- - legrand, model- - myrius, cat no- - 6792 09 or equivalent, 6 amps modular two way switch of make- - legrand, model- - myrius, cat no- - 6792 01 or equivalent, 6 amps modular bell switch of make- - legrand, model- - myrius, cat no- - 6792 20 or equivalent, 6 amps modular socket of make- - legrand, model- - myrius, cat no- - 6792 35 or equivalent, 16 amps modular socket of make- - legrand, model- - myrius, cat no- - 6792 30 or equivalent, blanking plate of make- - legrand, model- - myrius, cat no- - 6792 76 or equivalent, modular 2 module electronic fan regulator of make- - legrand, model- - myrius, cat no- - 6792 39 or equivalent, 2 module modular pvc surface mounting box with base cover plate, 3 module modular pvc surface mounting box with base cover plate, 4 module modular pvc surface mounting box with base cover plate, 6 module modular pvc surface mounting box with base cover plate, 8 module modular pvc surface mounting box with base cover plate, 12 module modular pvc surface mounting box with base cover plate, 6/16amp combined switch and socket, 3 in one, universal s.s. combined, with safety shutter & pvc gang box., dingdong doorbell, electronic suitable for operation in 220v ac supply, havells/crompton or equilant make, 20 w, 1200 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications. thd lessthan10%, 36w, 1200 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications. thd lessthan10%, 10w, 600 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications., 10w min, b22 led bulb made up of integrated electronic driver along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications., 10w led type bulkhead luminaire with cool white colour temperature, efficiency of led light fitting minimum 110 lm/w, pf equal to 0.95 or more, thd should be less than 10% , minimum ip 65/66 protection with housing material made of high pressure die cast aluminium /standard alloy suitable for outdoor application suitable for operation on 230 v+/- 10%, 50hz, single phase ac supply and as per technical specification with all its accessories, driver etc. as complete., led flood light led luminaire in die-cast aluminium housing, ip66 flood light suitable for operating on voltage range (120 - 270v ac) single phase, 50hz supply of following rating. rating - 100w, led flood light led luminaire in die-cast aluminium housing, ip66 flood light suitable for operating on voltage range (120 - 270v ac) single phase, 50hz supply of following rating. rating - 200w, led flood light luminaire with secondary optical lens having minimum output of 120 lm/watt and rated power not exceeding 250 watts with 5 years warranty designed with powder coated pressure die cast aluminium housing, frame, ms mounting bracket, integral driver with surge protection, heat resistant toughned glass, conforming to ip 65/ip66 & ik 07 protection etc. complete as required. (led & power drive should meet the aai specifications. rating - 250 w led -bajaj praze f 300l wh nb-a5 tg sd model or equilanet, supply of 45w led type streetlight pole arm mountable luminaire with 5700k colour temperature, efficiency of led light fitting minimum 110lm/w, pf equal to 0.95 or more, thd should be less than 10% , minimum ip 65/66 protection with housing material made of high pressure die cast aluminium /standard alloy suitable for outdoor application with manufacturer name/logo embossed in the housing body or on aluminium plate etc. complete as required, all prewired up to terminal block and suitable for operation on 230 v+/- 10%, 50hz, single phase ac supply and as per technical specification with all its accessories, driver etc. as complete., supply of 12w light dome (white in colour) for garden lights, make crompton solar eclipse or suitable for existing pole., supply of 7w led spot light for lift cabin make- philips, model- starfit next or equivalent, supply of 5w, 1 ft led batten light, led type twin dome red aviation obstacle light fixture low intensity type b as per icao annex-14 , ip 66, operating on 230v ac 50 or 60hz input supply (operating band of 90v to 260v ac) direct mounting type complete as required as per the technical specifications., 1200 mm sweep, 5 star rated, bldc motor ceiling fan suitable for operating on 230 v ac etc., 1400 mm sweep, 5 star rated, ceiling fan suitable for operating on 230 v ac etc., 250 mm sweep exhaust fan with pvc body suitable for operation on 230v single phase ac supply 250 mm sweep,, air circulator, bldc pedestal type, 600 mm sweep, having adjustable height feature, aluminium blades, oscillating feature, suitable for operation in 230v ac supply., 400mm sweep wall fan, 5 star rated with 3 nos. of plastic blade having pull cord control feature & vertical adjustable tilt mechanism, oscillation feature, copper winding motor suitable for operation in 230v ac supply, supply of 2-inch size ball type foot valve, made of heavy-duty ci body with ss strainer and rubber/epdm sealing, suitable for water application, supply of 2-inch (dn50) inline digital water flow meter, suitable for measurement of potable water and sewage water flow, complete with sensor, transmitter, and all necessary accessories, as required., supply of 4-inch inline water flow meter (electromagnetic type), suitable for bulk water measurement, supply of 2-inch flow meter suitable for sewage treatment plant (stp) applications, preferably electromagnetic type, corrosion-resistant, with digital indicator, ip68 protection (sensor), complete with cables and accessories. make- frehing, fmf 2040 series, size- 80mm, supply of smc (sheet moulded compound) junction box of size 300 x 200 x 105 mm, suitable for outdoor pole mounting in street lighting applications, made of high-strength frp or smc material, weatherproof, uv resistant, fire retardant (ul94 v 0), with hinged door (right side), complete with gasket, locking arrangement, and provision for cable entry, suitable for 3-phase or 4-core systems, as per sintex model gsjb 3020(1) or approved equivalent, including all accessories required for proper installation., supply of 12 kv, 3.15 a hrc cartridge fuse (pt fuse) conforming to iec 60282 1, suitable for ht panels, item. pt fuse 11kv 3.15a 12abcna 3.15a bussman (set of 3 nos for r y b phases)., supply of portable high-pressure water jet cleaning system suitable for solar pv module cleaning, comprising motorized pressure pump power- 1800w, pressure- 120 bar, flow rate- 6l per min, voltage- 220v, 50hz, spray gun, high-pressure hose, and necessary accessories., supply of solar photovoltaic (pv) modules of capacity 335 wp, based on crystalline silicon technology with multi-crystalline cells, having a rated power output of 335 wp (plus or minus 2 percenet). the module dimensions shall be approximately 1958 mm x 987 mm, with a weight of around 21.2 kg.m make- renewsys india pvt ltd, model. deserv 3m6h 335 or equivalent, conforming to relevant iec standards (iec 61215 or iec 61730), complete in all respects as per specifications and as directed by the engineer-in-charge., supply of portable digital lux level meter suitable for measurement of illumination levels in lux (lx) and foot-candle (fc), for indoor and outdoor lighting assessment applications. the instrument shall have a measuring range up to at least 200,000 lux with high accuracy of plus or minus 3 percenet or better, and shall be suitable for measurement of light from various sources such as led, fluorescent, metal halide, high-pressure sodium, and incandescent lamps. make- fluke, model- fluke 941 light meter, supply of auto day/night on & off photocell, ldr sensor switch for lighting, water proof, suitable for outdoor usage, 230 v ac, 10a supply complete as required. - make - geltech model- gt-ld308 or equialant., supply of led landing h light suitable to replace existing landing h lights operated at 230v 50hz direct input supply. the fitting housing meets ip-66 dust & moisture proof. designed in accordance with icao aerodrome standards-aerodrome design & operators manual for landing direction indicator landing-t lamp advisory with bas fixing pipe flange. light output colour - white., catalog code- ltl-5w-ui, supply of 200w 6.6a bi-pin halogen lamps. (cat no. 64386 osram or equivalent) as required., supply of single phase preventer (phase failure relay) suitable for protection of 3-phase motors against single phasing, phase reversal, and voltage imbalance. the relay shall operate on 415 v ac, 3-phase, 50 hz supply and shall have built-in phase sequence correction and automatic reset feature. make- selec, model- sppa2m2, supply of 50mm dia dwc hdpe pipe isi marked, acb mechanical interlock set l&t make omega model, suitable exisitng panel, supply of digital hour meter (time totaliser), model ltc9a of selec or approved make list of aai, having 7 and half digit lcd display, suitable for cumulative time measurement with voltage or contact input (24 to 260v ac or dc), panel mounting type, battery powered with memory retention, measuring range up to 199999.99 hours, accuracy plus or minus 0.05 percent, with front or reset facility, complete as required.
Agency / Dept :
airports authority of india AAI
Due Date :
Aug 28, 2026 (9 days left)
Tender Value :
49.71L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16742567
Location : panchkula , haryana
Source : GEM Tenders
LIVE TENDER
tender for providing non pathogenic bacterial bio culture for biological treatment of sewage in stp , providing suitable grade molasses as carbon source for biological treatment of sewage in stp , providing chlorine solution having available chlorine content 9 to 10 percent for stp , providing split leather industrial safety gloves or gauntlets for maintenance works , providing 2 inch upvc foot valve with strainer and non return valve for water pumping system , repairing and rewinding of 1 point 5 hp monoblock pump set complete in all respects , repairing and rewinding of 3 hp monoblock pump set complete in all respects , repairing and rewinding of 2 hp monoblock pump set complete in all respects , cleaning of sewer tank by diesel operated suction cum jetting sewer cleaning machine , taking out stone and sand from filter media tank and refilling after cleaning and dechoking , supplying and filling stone boulders of size 5 cm to 20 cm in stp filter media tank , supplying and filling gravels of size 5 mm to 10 mm in stp filter media tank , supplying and filling coarse sand of size 1 point 5 mm to 2 mm in stp filter media tank, annual repair and maintenance of sewerage treatment plant for the year 2026 27 at btc itbp bhanu, for description of items please refer atc
Agency / Dept :
indo tibetan border police ITBP
Due Date :
Sep 02, 2026 (14 days left)
Tender Value :
11.52L
View Documents
T18 Ref No : 16309829
Location : manjhanpur , uttar pradesh
Source : GEM Tenders
tender for ms pipe 100 mm dia , butterfly valve of pn 1.6 rating 100 mm dia , non return valve 100 mm dia , fire brigade connection 2 way- 100mm dia m.s. pipe , electric driven terrace pump 900 ipm at 35 m head , pressure switch , start stop push buttons , anti vibration expansion bellow 100 mm dia , the industrial type pressure gauges , y strainer 100 mm dia , butterfly valve 100 mm dia , non return valve , ms pipe 80 mm nominal bore , ms pipe 100 mm nominal bore , internal hydrant single headed gunmetal , first-aid hose reel 40 m , hose pipe gun metal , short branch pipe gun metal , fire mans axe , fhc door of 16 gauge ms sheet 900 mm wide and 1500 mm height , orifice plate , air vessel , terrace water tank of 10000 lit , co2 type fire extinguisher 4.5 kg , fire extinguisher abc type 6 kg , fire related singnages , aluminium conductor 4 core x 6 sqmm , brass compression gland and al lugs 4 core x 6 sqmm , control wiring with multicore copper stranded conductor 2 x 2.5 sqmm , pre painted m s cable trays 150mmx50mmx1.6mm , main control and indicating panel 6 zone panel , smoke detector with built in led , response indicator on surface recess ms box , manual call boxes , fire alarm sounder , talk back slave station , fire alarm armoured cable , job work, fire fighting, ms pipe conforming 100 mm dia, butterfly valve of pn 1.6 rating 100 mm dia, non-return valve 100 mm dia, fire brigade connection 2 way- 100mm dia m.s. pipe, electric driven terrace pump 900 ipm at 35 m head, pressure switch, start stop push buttons, anti vibration expansion bellow 100 mm dia, the industrial type pressure gauges, y strainer 100 mm dia, butterfly valve 100 mm dia, non return valve, ms pipe 80 mm nominal bore, ms pipe 100 mm nominal bore, internal hydrant single headed gunmetal, first-aid hose reel 40 m, hose pipe gun metal, short branch pipe gun metal, fire mans axe, fhc door of 16 gauge ms sheet 900 mm wide and 1500 mm height, orifice plate, air vessel, terrace water tank of 10000 lit, co2 type fire extinguisher 4.5 kg, fire extinguisher abc type 6 kg, fire related singnages, control panel, aluminium conductor 4 core x 6 sqmm, brass compression gland and al lugs 4 core x 6 sqmm, control wiring with multicore copper stranded conductor 2 x 2.5 sqmm, pre painted m s cable trays 150mmx50mmx1.6mm, main control and indicating panel 6 zone panel, smoke detector with builtin led, response indicator on surface recess ms box, manual call boxes, fire alarm sounder, talk back slave station, fire alarm armoured cable, arrangement of signage for safe exit, resources training for staff and training modules for rescue operation, cost of enhancement of external electric load and connection from transformer to pump room including cable etc for fire fighting works
Agency / Dept :
department of higher education HED
Due Date :
Jul 29, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16022012
Location : lucknow , uttar pradesh
Source : GEM Tenders
corrigendum tender for main fire pump , diesel driven pump , jockey pump , terrace pump , control panel , starter , m s pipe , internal hydrant valve , external yard hydrant valve , butterfly valve , sfc of butterfly valve , orifice plate , pitc non return valve , stainless steel y strainer , pitc of stainless steel y strainer , hose pipe , first aid hose reel , short branch pipe , fire brigade connection , foot valve , air vessel , pressure switch , pressure gauge , control valve , hose cabinet , cutting holes , supply of cable , laying of cable , end termination , fire cable , cable tray , earthing , gi strip , gi strip , earth wire , gi pipe, pitc of fire fighting with wet riser system, sh 1 wet riser system main fire pump a supplying, installation, testing and commissioning of electric driven main fire pump conforming to is 12469 2019 suitable for automatic peration and consisting of following complete in all respects as required. b horizontal type multistage centrifugal split casing pump of cast iron body and bronze impeller with stainless steel shaft fire pump capable for delivery of 2280 lpm against atotal head of 70 mtrs approximately while running at 1450 1500 rpm mechanical seal as required bsnl approved make. c suitable hp squirrel cage induction motor tefc synchronous speed 1500 rpm suitable for operation on 415 volts 3 phase 50 hz ac supply with ip 55 protection for enclosure horizontal foot mounted type with class. f insulation conforming to is 12615 2018. d m.s. fabricated common base plate coupling,coupling guard, foundation bolts etc. as required. e suitable cement concrete foundation duly plastered with anti vibration pads note the head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point.the pump room is situated on the underground water tank. 2280 lpm at 70 m head, diesel driven pump a supplying, installation, testing and commissioning of diesel engine driven main fire pump conforming to is 12469 2019 suitable for automatic operation and nsisting of following,complete in all respects, as required.diesel driven pump. b horizontal type, multistage, centrifugal pump of cast of iron body and bronze peller with stainless steel shaft, mechanical seal suitable to delivering 2280 lpm against atoatl head of 70 mtrs approxi as required.c suitable hp, 1500 rpm water cooled with radiator, diesel engine conforming to relevant is standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.d m.s fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.e suitable cement concrete foundation duly plastered and with anti vibration pads.note the head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point. the pump room is situated on the underground water tank.2280 lpm at 70 m head, jockey pump a supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to is 12469 2019 suitable for automatic operation and consisting of following, complete in all respects as required jockey pump.b horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required.c suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase50 hz ac supply with ip 55 class of protection for enclosure, horizontal foot mounted type with class f insulation, conforming to is 12615 2018. d m.s. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) suitable cement concrete foundation duly plastered and with anti vibration pads.note the pump room is situated on the underground water tank. 180 lpm at 70 m head, supplying, installation, testing and commissioning of electric driven terrace pump conforming to is 12469 2019 suitable for automatic operation and consisting of following,complete in all respects, as required terrace pump b horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required.c suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase, 50 hz, ac supply with ip55 class of protection for enclosure, horiziontal foot mounted type with class f insulation, conforming to is-12615 2018. d m.s.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.e suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m head, control panels fabrication supplying installation testing and commissioning of electrical control panel of cubical construction floor mounted type fabricated out of 2mm thick crca , apartmentalised with hinged lockable doors, dust and vermin proof powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper copper strip, having switchgears and accessories, mountings and internal wiring earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurization pump and diesel pump set complete as per cpwd specification and atc attached for main fire pump , jockey pump, diesel pump with system controller as per as per atc attached, supply installation testing and commissioning of fully automatic dol starter for terrace pump terrace pump siutable for operation on 3 phase 415 volt ac supply i/c making inter connection testing etc as requiored at site., sh ii pipes and accessories.providing laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class -ii of is 3589 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per is 10221, refilling the trench etc. of following sizes complete as required. 150 mm dia, providing, laying, testing & commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 50 mm dia, providing, laying, testing & commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 80 mm dia, providing, laying, testing & commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.100 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 150 mm dia, providing, laying, testing & commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 200 mm dia wall thickness 6.3 mm, supplying and fixing single headed internal hydrant valve with instantaneous gunmetal/stainless steel coupling of 63 mm dia with cast iron wheel isi marked conforming to is 5290 type a with blank gunmetal/stainless steel cap and chain as required.single headed gunmetal, supplying and fixing single headed external yard hydrant valve with 1 no. 63 mm dia instantaneous fm gunmetal/stainless steel coupling and cast iron wheel, isi marked, conforming to is 5290 type a with blank gunmetal/stainless steel cap and chain as required. single headed gunmetal, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required . 50mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .80 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .100 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .150 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .200 mm dia, supplying and fixing orifice plate made out of 6 mm thick stainless steel grade 304 with orifice of required size to be fitted between flange and landing valve of external and internal e pressure at the outlet to the level of 3.5 kg/cm2 complete as required., providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 50mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 80 mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 100 mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 150 mm dia., providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange. 80 mm dia, providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange.150 mm dia, providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange. 200 mm dia, supplying and fixing 63 mm dia, 15 m long rrl hose pipe with 63 mm dia male and femalecouplings duly bound with gi wire, rivets etc conforming to is 636 type a as required. gun metal., supplying and fixing first aid hose reel with ms construction spray painted in post office red,conforming to is 884 complete with the following as required.a 20 mm nominal internal dia. water hose thermoplastic textile reinforced type 2 as per is 12585 b 20 mm nominal internal dia gun metal globe valve and nozzle. c drum and brackets for fixing the equipmets on wall. d connections from riser with 25 mm dia stop gun metal valve and m.s. pipe and socket. 30 mtrs, supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to is 903 suitable for instantaneous connection to interconnect hose pipe coupling as required.gun metal., supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd for suitable dia ms pipe connection conforming to is 904 as required. 2 way 100 mm dia m.s. pipe, supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd for suitable dia ms pipe connection conforming to is 904 as required.4 way 150 mm dia m.s. pipe., providing, installation, testing and commissioning of c.i flanged swing type foot valve isi marked of following sizes confirming to is 4038 complete with all acessories complete etc as required.200 mm dia., supplying and fixing air vessel made of 250 mm dia, 8 mm thick ms sheet, 1200 mm in height with airrelease valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required., providing and fixing of pressure switch in m.s. pipe line including connection etc. as required., providing and fixing in position industrial type pressure gauge with gun metal / brass valves complete etc. as required., providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, ms pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required. 150 mm dia, supplying and fixing of hose cabinet of size 750 mm 600 mm 250 mm made of 2 mm thick ms sheet with 6 mm thick glazed glass doors i/c necessary locking arrangement suitable to accommodate external hydrant with butterfly valve , 2 nos . 15 mtr. long hose pipe, 1 no branch pipe, mounted on wall or raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect , for external hydrant ,as required., cutting holes up to 15cm and 15 cm in r.c.c. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1 2 4 1 cement 2 coarse sand graded stone aggregate 20 mm nominal size, including finishing complete so as to make it leak proof., sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988. 4 core 16 sqmm, sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988 . 3.5 core 25 sq. mm, sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988. 3.5 core x 70 sq. mm, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. upto 35 sq. mm clamped with 1mm thick saddle, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. above 35 sq. mm and upto 95 sq. mm clamped with 25 mm and 3mm ms flat clamp., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. above 185 sq. mm and upto 400 sq. mm clamped with 40mm and 3mm ms flat clamp, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required. upto 35 sq. mm clamped with 1mm thick saddle., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required.above 35 sq. mm and upto 95 sq. mm clamped with 25mm and 3mm ms flat clamp., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required.above 185 sq. mm and upto 400 sq. mm clamped with 40mm 3mm ms flat clamp, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.upto 35 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.mm above 35 sq. mm and upto 95 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.above 185 sq. mm and upto 400 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. upto 35 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. above 35 sq. mm and upto 95 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. above 185 sq. mm and upto 400 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 4 core 16 sq. mm size 28mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 25 sq. mm size 28mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 70 sq. mm size 38mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 300 sq. mm size 70mm, supplying and laying of 2core 1.5 sqmm fire alarm armoured cable, 600/1000v rated with annealed copper conductor having xlpe insulation, steel wire armouring and frls/hffr outer sheath complete as required., supplying and installaton following size of perforated painted with powder coating m.s. cable trays with perforation not more than 17.5 percent, in convenient sections, joined with connectors, suspended from the ceiling with two numbers ms/gi suspenders including base of suitable size ms/gi angle, bolts and nuts, painting suspenders, fastener etc as required. 100 mm wide , 50 mm depth , 1.6 mm thickness, earthing with g.i. earth plate 600 mm length x 600 width and 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal / coke and salt as required., providing and fixing 25 mm wide and 5 mm thick g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut, bolt, spring, washer excavation and re filling etc. as required., providing and fixing 25 mm wide and 5 mm thick g.i. strip on surface or in recess for connections etc. as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., providing and fixing following sizes g.i. pipes complete with g.i. fittings including trenching and refilling etc. 80 mm dia nominal bore
Agency / Dept :
bharat sanchar nigam limited BSNL
Due Date :
Jul 14, 2026
Tender Value :
59.95L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16448573
Location : manjhanpur , uttar pradesh
Source : GEM Tenders
corrigendum tender for ms pipe 100 mm dia , butterfly valve of pn 1.6 rating 100 mm dia , non return valve 100 mm dia , fire brigade connection 2 way- 100mm dia m.s. pipe , electric driven terrace pump 900 ipm at 35 m head , pressure switch , start stop push buttons , anti vibration expansion bellow 100 mm dia , the industrial type pressure gauges , y strainer 100 mm dia , butterfly valve 100 mm dia , non return valve , ms pipe 80 mm nominal bore , ms pipe 100 mm nominal bore , internal hydrant single headed gunmetal , first-aid hose reel 40 m , hose pipe gun metal , short branch pipe gun metal , fire mans axe , fhc door of 16 gauge ms sheet 900 mm wide and 1500 mm height , orifice plate , air vessel , terrace water tank of 10000 lit , co2 type fire extinguisher 4.5 kg , fire extinguisher abc type 6 kg , fire related singnages , aluminium conductor 4 core x 6 sqmm , brass compression gland and al lugs 4 core x 6 sqmm , control wiring with multicore copper stranded conductor 2 x 2.5 sqmm , pre painted m s cable trays 150mmx50mmx1.6mm , main control and indicating panel 6 zone panel , smoke detector with built in led , response indicator on surface recess ms box , manual call boxes , fire alarm sounder , talk back slave station , fire alarm armoured cable , job work, fire fighting, ms pipe conforming 100 mm dia, butterfly valve of pn 1.6 rating 100 mm dia, non-return valve 100 mm dia, fire brigade connection 2 way- 100mm dia m.s. pipe, electric driven terrace pump 900 ipm at 35 m head, pressure switch, start stop push buttons, anti vibration expansion bellow 100 mm dia, the industrial type pressure gauges, y strainer 100 mm dia, butterfly valve 100 mm dia, non return valve, ms pipe 80 mm nominal bore, ms pipe 100 mm nominal bore, internal hydrant single headed gunmetal, first-aid hose reel 40 m, hose pipe gun metal, short branch pipe gun metal, fire mans axe, fhc door of 16 gauge ms sheet 900 mm wide and 1500 mm height, orifice plate, air vessel, terrace water tank of 10000 lit, co2 type fire extinguisher 4.5 kg, fire extinguisher abc type 6 kg, fire related singnages, control panel, aluminium conductor 4 core x 6 sqmm, brass compression gland and al lugs 4 core x 6 sqmm, control wiring with multicore copper stranded conductor 2 x 2.5 sqmm, pre painted m s cable trays 150mmx50mmx1.6mm, main control and indicating panel 6 zone panel, smoke detector with builtin led, response indicator on surface recess ms box, manual call boxes, fire alarm sounder, talk back slave station, fire alarm armoured cable, arrangement of signage for safe exit, resources training for staff and training modules for rescue operation, cost of enhancement of external electric load and connection from transformer to pump room including cable etc for fire fighting works
Agency / Dept :
department of higher education HED
Due Date :
Aug 08, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Industrial Strainer. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Industrial Strainer sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Industrial Strainer Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Industrial Strainer, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Industrial Strainer Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Industrial Strainer Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Industrial Strainer.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Industrial Strainer depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Industrial Strainer Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Industrial Strainer bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Industrial Strainer. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Industrial Strainer, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Industrial Strainer, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Industrial Strainer?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Industrial Strainer tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Industrial Strainer?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Industrial Strainer, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Industrial Strainer is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All