sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

26Latest Flange wear gauge Tenders List

Latest Flange wear gauge Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Flange wear gauge tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Flange wear gauge tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Flange wear gauge Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Flange wear gauge tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Flange wear gauge Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Flange wear gauge Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Flange wear gauge Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Flange wear gauge tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Flange wear gauge Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Flange wear gauge sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Flange wear gauge tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Flange wear gauge tenders.

Is EMD mandatory for all Flange wear gauge tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Flange wear gauge work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Flange wear gauge tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Flange wear gauge Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17598352
Location : angul , odisha
Source : GEM Tenders
LIVE TENDER
tender for thread plug gauge _76705001100_rfq_1_1000075842_ea , thread ring gauge _76705001200_rfq_2_1000075842_set , portable wheel diameter gauge _76705001300_rfq_3_1000075842_ea , digital wheel distance measuring gauge _76705001400_rfq_4_1000075842_ea , tread wear measuring gauge _76705001500_rfq_5_1000075842_ea , flange wear gauge _76705001600_rfq_6_1000075842_ea , tyre defect gauge _76705001700_rfq_7_1000075842_ea , wheel profile gauges _76705001800_rfq_8_1000075842_set , gauge fig 9 ref g 95 manual _77505201400_rfq_9_1000075842_ea , gauge fig 14 ref g 95 manual _77505201450_rfq_10_1000075842_ea , gauge fig 15 ref g 95 manual _77505201460_rfq_11_1000075842_ea , gauge fig 16 ref g 95 manual _77505201470_rfq_12_1000075842_ea , gauge fig 17 ref g 95 manual _77505201480_rfq_13_1000075842_ea , gauge fig 30 ref g 95 manual _77505201500_rfq_14_1000075842_ea , gauge fig 33 ref g 95 manual _77505201520_rfq_15_1000075842_ea , gauge fig 34 ref g 95 manual _77505201530_rfq_16_1000075842_ea , gauge fig 40 ref g 95 manual _77505201540_rfq_17_1000075842_ea , gauge fig 41 ref g 95 manual _77505201550_rfq_18_1000075842_ea , gauge fig 44 ref g 95 manual _77505201560_rfq_19_1000075842_ea , gauge fig 46 ref g 95 manual _77505201580_rfq_20_1000075842_ea , gauge fig 28 ref g 95 manual _77505201600_rfq_21_1000075842_ea , gauge fig 26 ref g 95 manual _77505201610_rfq_22_1000075842_ea , gauge fig 25 ref g 95 manual _77505201620_rfq_23_1000075842_ea , trammeling gauge ref drm m mas 834 _77505201630_rfq_24_1000075842_ea , cbc buffer height gauge _77505201720_rfq_25_1000075842_ea, gauges for maintenance of casnub bogie of btap wagons 1000075842, thread plug gauge, thread ring gauge, portable wheel diameter gauge, digital wheel distance measuring gauge, tread wear measuring gauge, flange wear gauge, tyre defect gauge, wheel profile gauges, gauge fig 9 ref g 95 manual, gauge fig 14 ref g 95 manual, gauge fig 15 ref g 95 manual, gauge fig 16 ref g 95 manual, gauge fig 17 ref g 95 manual, gauge fig 30 ref g 95 manual, gauge fig 33 ref g 95 manual, gauge fig 34 ref g 95 manual, gauge fig 40 ref g 95 manual, gauge fig 41 ref g 95 manual, gauge fig 44 ref g 95 manual, gauge fig 46 ref g 95 manual, gauge fig 28 ref g 95 manual, gauge fig 26 ref g 95 manual, gauge fig 25 ref g 95 manual, trammeling gauge ref drm m mas 834, cbc buffer height gauge
Agency / Dept :
national aluminium company limited NALCO
Due Date :
Oct 24, 2026 (9 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17598353
Location : angul , odisha
Source : GEM Tenders
LIVE TENDER
tender for thread plug gauge _76705001100_rfq_1_1000075842_ea , thread ring gauge _76705001200_rfq_2_1000075842_set , portable wheel diameter gauge _76705001300_rfq_3_1000075842_ea , digital wheel distance measuring gauge _76705001400_rfq_4_1000075842_ea , tread wear measuring gauge _76705001500_rfq_5_1000075842_ea , flange wear gauge _76705001600_rfq_6_1000075842_ea , tyre defect gauge _76705001700_rfq_7_1000075842_ea , wheel profile gauges _76705001800_rfq_8_1000075842_set , gauge fig 9 ref g 95 manual _77505201400_rfq_9_1000075842_ea , gauge fig 14 ref g 95 manual _77505201450_rfq_10_1000075842_ea , gauge fig 15 ref g 95 manual _77505201460_rfq_11_1000075842_ea , gauge fig 16 ref g 95 manual _77505201470_rfq_12_1000075842_ea , gauge fig 17 ref g 95 manual _77505201480_rfq_13_1000075842_ea , gauge fig 30 ref g 95 manual _77505201500_rfq_14_1000075842_ea , gauge fig 33 ref g 95 manual _77505201520_rfq_15_1000075842_ea , gauge fig 34 ref g 95 manual _77505201530_rfq_16_1000075842_ea , gauge fig 40 ref g 95 manual _77505201540_rfq_17_1000075842_ea , gauge fig 41 ref g 95 manual _77505201550_rfq_18_1000075842_ea , gauge fig 44 ref g 95 manual _77505201560_rfq_19_1000075842_ea , gauge fig 46 ref g 95 manual _77505201580_rfq_20_1000075842_ea , gauge fig 28 ref g 95 manual _77505201600_rfq_21_1000075842_ea , gauge fig 26 ref g 95 manual _77505201610_rfq_22_1000075842_ea , gauge fig 25 ref g 95 manual _77505201620_rfq_23_1000075842_ea , trammeling gauge ref drm m mas 834 _77505201630_rfq_24_1000075842_ea , cbc buffer height gauge _77505201720_rfq_25_1000075842_ea, gauges for maintenance of casnub bogie of btap wagons 1000075842, thread plug gauge, thread ring gauge, portable wheel diameter gauge, digital wheel distance measuring gauge, tread wear measuring gauge, flange wear gauge, tyre defect gauge, wheel profile gauges, gauge fig 9 ref g 95 manual, gauge fig 14 ref g 95 manual, gauge fig 15 ref g 95 manual, gauge fig 16 ref g 95 manual, gauge fig 17 ref g 95 manual, gauge fig 30 ref g 95 manual, gauge fig 33 ref g 95 manual, gauge fig 34 ref g 95 manual, gauge fig 40 ref g 95 manual, gauge fig 41 ref g 95 manual, gauge fig 44 ref g 95 manual, gauge fig 46 ref g 95 manual, gauge fig 28 ref g 95 manual, gauge fig 26 ref g 95 manual, gauge fig 25 ref g 95 manual, trammeling gauge ref drm m mas 834, cbc buffer height gauge
Agency / Dept :
national aluminium company limited NALCO
Due Date :
Oct 24, 2026 (9 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17530043
Location : jodhpur , rajasthan
LIVE TENDER
tender for wheel profile gauge for b.g.loco rdso drg.no.skdl 3592 alt-6 ( for measurement of flange wear, root wear, tread wear, tyre thickness, wheel diameter and flat spot measuring gauge) material to be supplied along with calibration certificate traceable to nabl standards., wheel profile gauge for b.g.loco rdso drg.no.skdl 3592 alt-6 ( for measuremen t of flange wear, root wear, tread wear, tyre thickness, wheel diameter and flat spot mea suring gauge) material to be supplied along with calibration certificate traceable to nabl standards. - warranty period: 30 months after the date of delivery
Agency / Dept :
north western railway NWR
Due Date :
Oct 28, 2026 (13 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17632479
Location : alwar , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for steel rule , try square , caliper inside , caliper , caliper outside , divider spring , scriber , punch centre , screw driver , chisel cold flat , hammer ball , hammer ball peen , file flat 250 , file half round , hacksaw frame , safety goggles , punch dot , straight edge steel , spirit level , stud extractor , micrometer outside , vernier caliper , vernier height gauge , vernier bevel protractor , screw pitch gauge , wire gauge metric standard , universal scribing , punch letter set , punch number set , portable hand electric drill machine , drill twist straight , taps and dies , file knife edge , file feather , file triangular , file round , file square , feeler gauge , file flat , file swiss , file hand , file card , oil can , plier combination , wooden handle , spanner double ended , spanner adjustable , interchangeable , double ended , glass magnifying , clamp tool maker , c clamp , hand reamer , machine reamer , scraper flat , scraper triangular , scraper half round , chisel cold , drill chuck , pipe wrench , pipe vice , adjustable pipe , wheel dresser , vice machine , sleeve drill morse , vice bench , bench working , black board , wing compass , hammer hand , torque wrench , power tools , different profile , knurling tool , indexable boring bar , temperature gauge , dowel pin , standard tap screws , lapping plate dia 6 , medium carbon heat treated , caps screws , drill gauges , cast iron globe valve , c i sluice gate valve , stop cock , slip on forged steel , pipe threading , pulleys for v belt , v belt and flat belt , packing gasket , washer clutch keys , hollow punch , bearing different , lifting sling , bearing extractor , pulley extractor , trammel , poker , punch prick , mallet , aviation snip straight , flat headed hammer , hammer planishing , snip bent left cut , stake hatchet with leg , stake grooving , gauge slip metric , gauge snap , gauge plug , gauge telescopic , dial test indicator on stand , sine bar , dial vernier caliper universal type , screw thread micrometer , depth micrometer , digital vernier caliper , digital micrometer , comparator , engineer try square , surface roughness comparison plates , carbide wear , lathe tools h s s tipped set , lathe tools bit , arm strong type tool bit holder , stilson wrenches , pipe cutter wheel type , pipe bender spool type , adjustable pipe chain tong , s s and s c centre lathe , drilling machine , welding cable , lugs for cable , earth clamps , welding torch , gas lighter , hammer chipping , gloves leather , leather apron , spindle key , welding torches , welding goggles , welding helmet , tip cleaner , pneumatic trainer kit , hydraulic trainer kit , steel rule 150mm with metric and british graduation, try square 150 mm blade, caliper inside 150mm spring, caliper 150 mm hermaphrodite spring type, caliper outside 150 mm spring, divider spring joint 150 mm, scriber 150mm x 5mm, punch centre 120 mmx10mm, screw driver 150mm x 6mm, chisel cold flat 20mmx150mm, hammer ball peen450 gm 1lb with handle, hammer ball peen 220 gm 1 2 lb with handle, file flat 250 mm second cut, file flat 250 mm smooth, file half round 150 mm second cut, hacksaw frame fixed 300mm, safety goggles, punch dot100 mm, steel rule graduated both in metric and english unit, straight edge steel, spirit level 300 mm type, stud extractor ezy out, micrometer outside 0 to 25 mm, vernier caliper 150 mm, vernier height gauge 300 mm, vernier bevel protractor blade with acute angle attachment, screw pitch gauge, wire gauge metric standard, universal scribing block 220 mm, punch letter set, punch number set, portable hand electric drill machine 0 to 13 mm capacity, drill twist straight shank 3 to 12 mm by 0 5 mm, taps and dies complete set in a box b s w whitworth, taps and dies complete set in box set of 05, file knife edge 150 mm smooth, file feather edge 150 mm smooth, file triangular smooth 200 mm, file round 200 mm second cut, file square 250 mm second cut, feeler gauge, file triangular 200 mm second cut, file flat 300 mm second cut safe edge, file flat 200 mm bastard, file flat 300 mm bastard, file swiss type needle set of 12, file half round 250 mm second cut, file half round 250 mm bastard, file round 250 mm bastard, file hand 150 mm second cut, file card, oil can 250 ml, plier combination insulated 150 mm, wooden handle forged soldering iron copper bit, spanner double ended, spanner adjustable, interchangeable ratchet socket, double ended tubular box spannerr, glass magnifying 75 mm, clamp tool maker 50 mm, clamp tool maker 75 mm, c clamp 100 mm, c clamp 200 mm, hand reamer set taper pin straight flute, machine reamer parallel helical flute, scraper flat 150 mm, scraper triangular 150 mm, scraper half round 150 mm, chisel cold 9 mm x150 mm cross cut, chisel cold 9 mm x 150 mm diamond, chisel cold flat 9 mm x 100 mm, chisel cold 9 mm x 100 mm round nose, drill chuck 12 mm with key, pipe wrench 400 mm, pipe vice 100 mm, adjustable pipe die set b s p, wheel dresser, vice machine 100 mm jaw swivel base, vice machine 125 mm swivel base, sleeve drill morse, vice bench 150 mm jaw, bench working 2400 x 1200 x 900 mm, black board with easel, vice machine 100 mm jaw, wing compass 300 mm, hammer hand 1 kg with handle, torque wrench, power tools for fastening capacity, different profile gauges plate type for demonstration, knurling tool diamond straight and diagonal, indexable boring bar with inserts, temperature gauge range 0 150, dowel pin, standard tap screws, lapping plate dia 6, medium carbon heat treated alloy steel metric studs and bolts, caps screws, drill gauges, cast iron globe valve flanged type, c i sluice gate valve flanged type, stop cock, slip on forged steel flange, pipe threading die with handle, pulleys for v belt or flat belt, v belt and flat belt, packing gasket, washer clutch keys jib cotterand circlip, hollow punch, bearing different types, lifting sling, bearing extractor, pulley extractor, trammel, poker, punch prick, mallet, aviation snip straight, flat headed hammer with handle, hammer planishing, snip bent left cut, stake hatchet with leg, stake grooving, gauge slip metric as johnson set, gauge snap go and not go, gauge plug single ended, gauge telescopic, dial test indicator on stand, sine bar, dial vernier caliper universal type, screw thread micrometer, depth micrometer, digital vernier caliper, digital micrometer, comparator s gauge dial indication, engineer s try square knife edge, surface roughness comparison plates, vernier bevel protractor, carbide wear block 1 mm 2 mm, lathe tools h s s tipped set, lathe tools bit, arm strong type tool bit holder, stilson wrenches, pipe cutter wheel type, pipe bender spool type, adjustable pipe chain tong, spanner adjustable, s s and s c centre lathe all geared, drilling machine, welding cable, lugs for cable, earth clamps, welding torch tips of different sizes, gas lighter, hammer chipping 300 gm, gloves leather, leather apron, spindle key for cylinder valves, welding torches, welding goggles, welding helmet with colored flame retardent glass, tip cleaner, pneumatic trainer kit, hydraulic trainer kit
Agency / Dept :
department of technical education DTE
Due Date :
Oct 27, 2026 (12 days left)
Tender Value :
21.02L
View Documents
T18 Ref No : 17701925
Location : junagadh , gujarat
Source : GEM Tenders
LIVE TENDER
tender for iti veraval boq fabrication group - air compressor for plasma cutting machine , angle plate adjustable 250 x 150 x 175 , anvil 24 sq. inches working area with stand , bearing different types , boring bar indexable , caliper hermachrodite.spring 15 cm , caliper inside spring 6 inch or 15 cm , caliper outside spring 6 inch or 15 cm , caps screws m6, m8, m10, m12 , carbide wear block 1 mm-2 mm. , carrier for mounting components, , drill twist 1.5 mm to 15 mm , drills guage straight shank , cut section models for hydraulic components , cut section models for penumatic components , divider spring 6 inch or 15 cm , dowel pin straight dia. 1 inch length 4 inch , drift drill 200 mm hardened and black finish , stake grooving. 100 x 100 x 300 mm , stake hatchet with leg. 300 x 200 x 20 mm , file knife edge smooth.15o mm , file round 2nd cut 150 mm , file round 2nd cut 200 mm , file square 2nd cut 250 mm , file square rough 300 mm , file triangular 2nd cut 200 mm , marking out table 90 x 60 x 90 cm , drill gauge 1,5 to 12.5 mm in steps of 0,5 mm , drill twist st. shank metric , drill twist taper shank 8 mm to 20 mm by 0.5 mm , flange slip on forged steel flange 150nb, , gasket packing ptfe roll , gate valve dia flanged type 150nb, , gear spur old damaged to fit 50 mm shaft dia , hammer ball pein 1 kg or 2 lbs with handle , hammer chipping 0.25 kg , hammer cross pein 450 grams or 500 grams or 1 lb with handle , hammer flat head with handle , jigs and fixture sample for demonstration , key to fit shaft and pulley , marking table or surface plate table , globe valve cast iron flanged type , lapping plate 6 inch dia , mallet. dia 100 mm x 150 mm , multi angle magnetic clamp set , pipe bender spool type with stand , plastic welding machine with hot air gun, temp. display, variable temp., , swage block 5048 , cast iron 16 x 16x 16 inch , swagging and flooring tool kit , poker - 900 mm long , power cutter electrically operated , power tool for fastening capacity 10 to 18mm , pressure regulator co2 gas with flow meter , profile gauges plate type , pulleys for v-belt or flat belt , punch prick 6 inch or 15 cm , pneumatic rivet gun , screw driver insulated 6 inch or 150 mm , scriber 150 mm knurled center position , shear tinmans 300 mm , shear hand capacity to cut 6 mm thick sheet and flat , snip bent 250 mm , snip straight 300mm , standard tap screws , stop cock 25nb 2 way, threaded end , table for gas cutting suitable size , tin smiths bench folder 600 x 1.6 mm , vernier caliper set 150 inside and outside , , washer, clutch, keys, jib, cotter and circlip, air compressor for plasma cutting machine, angle plate adjustable 250 x 150 x 175, anvil 24 sq. inches working area with stand, each type of diameter 25mm (min.), with insert 1 inch shank, caliper hermachrodite.spring 15 cm, caliper inside spring 6 inch or 15 cm, caliper outside spring 6 inch or 15 cm, caps screws m6, m8, m10, m12, carbide wear block 1 mm-2 mm., such as pb and relay boxes., various sizes by 0.5 mm, letter sizes a to z with guage, wire size 1 to 60 with guage, cut section models for hydraulic components, cut section models for penumatic components, divider spring 6 inch or 15 cm, mat stainless steel, drift drill 200 mm hardened and black finish, stake grooving. 100 x 100 x 300 mm, stake hatchet with leg. 300 x 200 x 20 mm, file knife edge smooth.15o mm, file round 2nd cut 150 mm, file round 2nd cut 200 mm, file square 2nd cut 250 mm, file square rough 300 mm, file triangular 2nd cut 200 mm, marking out table 90 x 60 x 90 cm, drill gauge 1,5 to 12.5 mm in steps of 0,5 mm, 3 mm to 12 mm , in step of 0.5 mm., drill twist taper shank 8 mm to 20 mm by 0.5 mm, ansi-b16.5, class 150, gasket packing ptfe roll, class 150 flange ansi125 b16.1, gear spur old damaged to fit 50 mm shaft dia, hammer ball pein 1 kg or 2 lbs with handle, hammer chipping 0.25 kg, hammer cross pein 450 grams or 500 grams or 1 lb with handle, hammer flat head with handle, jigs and fixture sample for demonstration, key to fit shaft and pulley, 900 x 900 x 900 mm heghit, 150nb, class 150 flange ansi125 b16.1, lapping plate 6 inch dia, mallet. dia 100 mm x 150 mm, (metal base 18 x10 x 10 cm), manually operated. up to 25mm, pe,pp and pvc sheet or pipe welding control with stand. accessories, swage block 5048 , cast iron 16 x 16x 16 inch, 45 degree tubing 1/8 to 3/4 inch, poker - 900 mm long, portable abrasive cut off machine, power tool for fastening capacity 10 to 18mm, pressure regulator co2 gas with flow meter, for demonstration metric standard, to fit on 50mm dia. shaft with key slot, punch prick 6 inch or 15 cm, pneumatic rivet gun, screw driver insulated 6 inch or 150 mm, scriber 150 mm knurled center position, shear tinmans 300 mm, shear hand capacity to cut 6 mm thick sheet and flat, snip bent 250 mm, snip straight 300mm, m3, m4, m5, m6, m8, m10, m12, m14, m16, stop cock 25nb 2 way, threaded end, table for gas cutting suitable size, tin smiths bench folder 600 x 1.6 mm, depth to read inches and mm, minimum 25mm size, carbon steel material
Agency / Dept :
department of employment and training DET
Due Date :
Oct 29, 2026 (14 days left)
Tender Value :
5.47L
View Documents
T18 Ref No : 17429307
Location : ghaziabad , uttar pradesh
tender for flange wear gauge (bg) as per rdso drawing, flange wear gauge (bg) as per rdso drawing no. skdl-4445. - warranty perio d: 30 months after the date of delivery
Agency / Dept :
northern railway NR
Due Date :
Oct 13, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16688902
Location : ratlam , madhya pradesh
tender for set of digital wheel wear gauges for bg, set of digital wheel wear gauges for bg locomotives consisting of three items as per specifications -i digital flange wear gauge for bg locomotive (with respective to analog wear ga uge as per rdso drg no.skdl- 3592 alt-6) with (1) least count 0.01 mm (2) lcd display (3) 1.5 v button ce ll (4) traveling range 0-50mm (5) calibration certificate traceable to nabl standard. -ii digital root wear ga uge for bg locomotive (with respective to analog wear gauge as per rdso drg no. skdl3592 alt-6) with (1) least count 0.01 mm (2) lcd display (3) 1.5 v button cell (4) traveling range 0-50 mm (5) calibration certific ate traceable to nabl standard. -iii digital tread wear gauge for bg locomotive (with respective to analog wear gauge as per rdso drg no. skdl-3592 alt-6) with (1) least count 0.01 mm (2) lcd display (3) 1.5 v b utton cell (4) calibration certificate traceable to nabl standard. make: ganapathy/ paragon/ jyoti only n ote: item to be supplied along with calibration certificate and warranty certificate. - warr anty period: 30 months after the date of delivery
Agency / Dept :
western railway WR
Due Date :
Aug 31, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16570915
Location : ahmedabad , gujarat
tender for set of digital wheel wear gauges for wdg, set of digital wheel wear gauges for wdg4g and wdg6g locomotives conforming to rdso technical bulletin no. mp.ib.bd.02.16.01 (rev.01) f or wheel wear wheel wear parameter measurement and application management of wdg4g and wdg6g locomotives; consisting of three items as per details given below - (1) digital flange wear gauge ,(2) digital root wear gauge, (3) digital tread wear gauge for wdg4g and wdg6g locomotives as per specificatio n as annexure-a attached. accepted make- paragon, jyoti, electronica. - warranty period: 30 months after the date of delivery
Agency / Dept :
western railway WR
Due Date :
Aug 22, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 17137551
Location : ahmedabad , gujarat
tender for set of wheel measuring gauges consisting of flange wear gauge, root wear gauge, & tread wear gauge, set of wheel measuring gauges. one set consisting of following 3 gauges: make- paragon instrumentation engineers, jyoti and banthia standar d gauge (bsg) or equivalent makes accepted. (details specification attached) - warranty period: 30 months after the date of delivery
Agency / Dept :
western railway WR
Due Date :
Oct 05, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17571595
Location : chennai , tamil nadu
tender for set of wheel profile parameter measurem - set of wheel profile parameter measurement gauges. gauges required for bg electric loco (wap5) wheel profile measurement. one set consist of following 03 items (1) root wear gauge for thick flange least count 0.5 mm as per rdso drawing no. skdl-4444 alt nil qty. - 01 no. (2) flange wear gauge for thick flange least count 0.5 mm as per rdso drawing no. skdl-4445 alt nil qty. - 01 no. (3)wheel dia /tyre thickness & tread wear gauge for thick flange least count 0.5 mm as per rdso drawing no. skdl-4446 alt nil qty. - 01 no. material: stainless steel, pointer duly hardened & tempered. (note: item to be supply along with warranty certificate and calibration certificate from approved lab of nabl.), set of wheel profile parameter measurement gauges. gauges required for bg electric loco (wap5) wheel pr ofile measurement. one set consist of following 03 items (1) root wear gauge for thick flange least count 0.5 mm as per r dso drawing no. skdl-4444 alt nil qty. - 01 no. (2) flange wear gauge for thick flange least count 0.5 mm as per rdso dr awing no. skdl-4445 alt nil qty. - 01 no. (3)wheel dia /tyre thickness & tread wear gauge for thick flange least count 0.5 mm as per rdso drawing no. skdl-4446 alt nil qty. - 01 no. material: stainless steel, pointer duly hardened & tempered. (note: item to be supply along with warranty certificate and calibration certificate from approved lab of nabl.) - warrant y period: 12 months after the date of delivery
Agency / Dept :
southern railway SR
Due Date :
Oct 12, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Flange Wear Gauge. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Flange Wear Gauge sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Flange Wear Gauge Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Flange Wear Gauge, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Flange Wear Gauge Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Flange Wear Gauge Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Flange Wear Gauge.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Flange Wear Gauge depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Flange Wear Gauge Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Flange Wear Gauge bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Flange Wear Gauge. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Flange Wear Gauge, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Flange Wear Gauge, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Flange Wear Gauge?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Flange Wear Gauge tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Flange Wear Gauge?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Flange Wear Gauge, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Flange Wear Gauge is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All