sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

43Latest Dimension gauge Tenders List

Latest Dimension gauge Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Dimension gauge tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Dimension gauge tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Dimension gauge Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Dimension gauge tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Dimension gauge Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Dimension gauge Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Dimension gauge Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Dimension gauge tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Dimension gauge Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Dimension gauge sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Dimension gauge tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Dimension gauge tenders.

Is EMD mandatory for all Dimension gauge tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Dimension gauge work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Dimension gauge tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Dimension gauge Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16998365
Location : ajmer , rajasthan
NEW TENDER
tender for gauges for hole on draft yoke., gauges for hole on draft yoke.45mm dia hole,required size- nogo-48.0 mm (flat type),gauge for bush on 32mm dia hole, required size- nogo-33.0mm(flat type),snap gauge for draw gear pin (31mm) size no go- 30.0 mm,snap gauge for wearing piece(12mm) size no go - 6.0 mm,snap gauge for locating pin (25mm) size no go -19.0mm,l type gauge for pre- compressio n length of rubber pack 193mm,gauge for free height of rubber spring & parting plates 208 mm,projection gauge for measuring the shoulder on the draw hook from the head stock is within 92mm-120mm, no go gauge for wearing piece dimension 43.5 and 42 mm,gauge for condemnin g limit of rubber springs 186mm as per annexure a - warranty period: 30 months after the date o f delivery
Agency / Dept :
north western railway NWR
Due Date :
Sep 17, 2026 (17 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16813008
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
LIVE TENDER
tender for almirah large with shelves steel , book case small , charpoy ip with hard top , locker bed side steel , rack adjustable 6 tier steel , table dressing gents with mirror , table dressing ladies with mirror , table dining 4 person , table writing med , teapoy wooden , hat stand with mirror , sofa set 5 seater , chair computer , rack shoe steel , table bed side , bin solied linen multi purpose, special repair surveyed off condemned furniture for the qe jun 2025 under ge minniebay, dimension overall size shall be 1985mm high comma 920mm wide and 485mm deep. description the base shall be made of two numbers mild steel sheet channel bases made in u shaped with ends covered. mild steel sheet shall be 1mm thick. the base channel shall be welded at 50mm from each end of the length of 920mm and shall be up to full width of 485mm and shall be 100mm high top comma sides bottom and back of almirah shall be of 1mm thick mild steel sheet. four shelves equally spaced of 1mm thick mild steel sheet shall be provided to make five compartments. front shutter shall two leaves of equal size. front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung. all joints and welding and fixing shall be done in accordance with the standard workmanship. handle one chromium plated steel handle with a locking device shall be provided as shown on drawing. locking device the locking device shall be three way locking device and shall also be provided with decorative key plate. finish all steel surfaces shall be painted with two coats of smoke grey paint internally and extrenally with spray machine over a coat of red oxide primer after preparation of surfaces. a mark of mes shall also be provided on top left corner of front shutter with visible colour. painting shall be done with spray machine. rest all as per drg., overall size shall be 1025mm long comma 450mm wide and 750mm high. back shall be 1025 mm long and 750 mm high made out of prelaminated hdf board bd 18mm thick one side teak comma walnut and other side balancing white comma rest all as per drg and as directed by engr in charge., overall size shall be 1980mm long comma 900mm wide and 440mm high. two long rails and two short rails shall be of 25mmx65mmx16 gauge ms rectangular pipe. the legs shall be of size 32mmx32mmx16 gauge welded to long and short rails as shown on drg.two stiffeners of size 25mmx25mmx16 gauge shall be provided in equidistant between two opposite long rails. six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. two stiffeners joining legs of size 25mmx25mmx16 gauge shall be provided at 150mm from ground level. 12mm thick bwr plywood shall be provided for top as shown on drg with proper nut and bolt .one nut and bolt shall also be provided at centre of each stiffeners for fixing the plywood irrespective of what is shown on drg. pvc hard rubber shoes shall be fixed at bottom of each leg. all steel surfaces shall be painted with synthetic enamel paint black in color after applying a coat of primer. rest all as per drg, dimension overall size shall be 760mm long comma 600mm wide and 1100mm high. description the locker shall be made of mild steel sheet 1mm thick. 20 mm dia conduit pipe shall be chrome plated with wall thickness of 1 point 6 mm shall be fixed with side sockets. two handles chromium plated 100mm long shall be fixed to shutters with necessary riveting. one hasp and staple 75mm long shall also be fixed to shutters with riveting. the left shutters shall be provided with 100mm long tower bolt inside at upper and lower ends also. the locker shall be provided with compartments as shown in drgs made of 1mm ms sheet. finish all steel surface internally and externally comma exposed to view when placed in position shall be given two coats of smoke grey paint internally and externally after properly smoothened the surface with sand paper and applying putty. painting shall be done with spray machine. rest all specifications are as per drg., dimension overall size shall be 915mm long comma 610mm wide and 1905mm high. description the entire rack shall be made of 1mm mild steel sheet. the sides shall be provided with 40x40x4mm angle iron welded to 1 point 00mm thick ms sheet. 75x75x3mm thick flat iron cut to shape shall be welded at front corner. all partitions shall also be made of 1mm thick mild steel sheet and shall be riveted to side of rack. all dimensions comma shape and size shall be followed as per drg. all joints comma fixing shallbe done in accordance with standard specifications. rest all as shown on drg. finish all steel surfaces exposed to view when placed in position shall be painted with two coats of smoke grey hammer paint internally and extrenally with spray machine after preparation of surfaces. painting shall be done with spray machine. rest all as per drg., all as per drg comma the frame shall be strictly as per drg wallet oblique teak colour as approved. the mirror shall be of 5mm thickness of make modiguard oblique saint gobain all shown on drg and as directed by engr in charge., the overall size of the table dressing shall be 1150mm long 380mm wide and 1700mm high. the sides comma top comma back and front of the base unit shall be of 18mm thick prelaminated mdf board. the bottom of the side units shall be of 12mm thick mdf board. the sides and back of drawers shall be of 12mm thick prelaminated mdf comma bottom of the drawers shall be of 6mm thick commercial ply whereas the front of the drawers shall be of 18mm thick prelaminated mdf board. 5mm thick electro copper plated mirror shall be fixed over 6mm thick plywood back. track rails 25mm x 25mm in section on one side telescopic channel of make hettick oblique ebbco comma on two vertical. the overall size of the stool shall be 440mm long 350mm wide and 425mm high. the four sides shall be of 18mm thick prelaminated mdf. the top of the stool shall be of 12mm thick plywood openable as shown in drg. four heavy duty revolving nylon double wheels shall be provided at base below the 6mm base ply fixed over wooden runner 20 mm x 20 mm. the seat of the stool shall be 75mm high comma made of foam 40 density covered with tapestry cloth as approved by engr in charge oblique ge. rest all as per drg., all as per drg comma the wood shall be 1st class hard wood teak free from any joints cracks and knots. the top shall be made out of 18mm thick mdf board exterior grade one side teak lamination in wange oblique wallet as approved colour and one side white lamination. all exposed edges of ppb shall be provided wooden beading of teak wood 4mm thick x 18mm wide duly polished with matching colour the frame shall be polished after prepration of surfaces with two or more coats of brown oblique walnut colour melamyne polish with spray machine as per the requirement to its glossy look. rest all as shown on drg and as directed by engr in charge., dimension overall size shall be 1145mm long comma 600mm wide and 760mm high. description all wood shall be of first class hard teak wood except top and right hand side drawer cabinet. legs shall be of 35mmx55mm in section and 717mm high having 5mmx5mm in section groove at the top of legs at the portion when placed in position. the top shall be of 18mm thick of approved shade and the edges shall be covered with 4mm thick teak wood beading. two short stiffeners of teak wood of size 50mmx40mm in section irrespective of what is shown on drg shall be provided between legs at 100mm from bottom of legs. sides of the box which house the drawer and cabinet shall be 18mm thick bwr grade plywood sides and back of drawers shall be of 12mm thick teak wood planks. bottom of drawers shall be of 6 mm thick plywood commercial. 6mm thick plywood commercial 75mm high partition shall be provided in the drawer. shutter for cabinet shall be fixed with piano type continuous hinges. lock shall be provided to drawer and shutters. recessed handle shall be provided to drawer and shutter. 25mm dia and 25mm high rubber shoes shall be fixed to bottom of legs. finish all wood surfaces shall be melamyne polished with high gloss finishby spray machine. rest all as per drg., dimension the overall size shall be 600mm long comma 450mm wide and 540mm high. description the legs shall be 60mmx30mm in section and 497 mm high and shall be of teak wood. 5mmx5mm in section groove shall be provided at the visible portion of top of legs. top rails of teak wood of 20mmx50mm in section and 510mm long shall be provided between the legs. bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. a centre rail of size 20mmx50mm shall also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg. 25mm thick and 25mm dia hard rubber oblique pvc rings shall be fixed to the bottom of all legs fixed with 30mm long screws. top of table shall be of 18 mm thick pre laminated mdf board with 4mm teak wood edging alround the top of table. finish all wood surfaces shall be melamyne polished with high gloss finish by spray machine. rest all as per drg, overall size shall be 1330 mm long comm 710mm high. the inner frame shall be of 50mmx20mm teak wood battens six in nos. the back and front of frame shall be covered with 6mm thick commercial ply. the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive. six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg. 5mm thick looking mirror of saint gobian comma modiguard oblique atul shall be provided as shown on drg with beading alround. mild steel key plate shall be provided at both top corners of the hat stand. all exposed surfaces shall be given high gloss melamyne polish with lacquer spray machine finish. rest all as per drgs, all as per drg comma the timber in all around shall be first class hard wood teak comma the cushions shall be made out of pu foam of min 40 density of approved make and covered with tapestery cloth of approved quality comma pattern and colour before incorporating in work. the frame shall be polished after prepration of surfaces with two or more coats of brown oblique walnut colour melamyne polish with spray machine as per the requirement to its glossy look rest all as shown on drg and as directed by engr in charge., the base pedestal assembly of chair computer shall be of dia 700mm and 1060mm high. the pedestal assembly shall be provided with injection molded in black 30 percentage glass filled nylon. a 10 point 5mm dia forged bright zinc plated ms castor pin is of press fitted into each prong for holding the castors. the seat and back of the chair computer shall be made of 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. the back form shall be designed with contour lumber support for extra comfort with pvc lipping allround. the back rest shall be adjustable and consist of drop lift mechanism and shall be adjusted in the insert. it shall be scratch and weather resistant. rest all as per sample and as approved by ge, overall size shall be 700mm long comma 300mm wide and 880mm high. the legs of the shoe rack shall be of 25mm dia ms pipe of 18 gauge. the five shelves of the rack shall be of 20mm dia ms pipe of 18 gauge welded to legs. the shelves shall have 3mm dia ms rod 9 nos in widthwise and 3 nos in lengthwise welded to 20mm dia shelf frame. pre treated with powder coated oven baked with black colour., the overall size of the table bed side shall be 450mm x 450mm x 600mm from rear and 450mm x 450mm x 500mm from front as shown in drg. the entire frame of table bed side shall be made up of 18mm ms square pipe 18 gauge duly black powder coated. the two sides and top shall be made up of 18mm thick mdf board exterior grade. the back of the table except the top portion as shown in drg shall be provided with 6mm commercial plywood bwr grade duly screwed to frame. the two sides comma back and bottom of drawers of the table shall be made up of 12mm thick mdf board irrespective of what is shown on drg comma except the front side which shall be of 18mm thick mdf board exterior grade. the drawers shall be made functional by using telescopic channel of appropriate size shall be used for smaooth mvement of drawer.the drawers of the tables shall be provided with 100mm long cp handles. rest all as per drg. the lower portion of the bed side table should be box type provided with one shutter of appropriate size duly fixed with piano type hinges comma one cp handle of 4 inch size and one magnetic catcher should also be provided. rest all as shown on drawing and as directed by engr in charge., overall size shall be of 1000mm long comma 380mm wide and 760mm high. bottom rest shall be made of 19mm thick mdf board and shall be 900mm long and 280mm wide and 75mm hih joined together in long and short sides. multipurpose bin linen shall be placed over it. the bin shall be 1000mm long comma 380mm wide and 385mm high. back side shall be of 19mm thick mdf board 1000mm long and 685mm high. sides shall be of 19mm thick mdf board 380mm wide and 685mm high. top and bottom shall be of 19mm thick mdf board 1000mm long and 380mm wide. a vertical partition shall be provided at 400mm from inner face of left hand side which shall be of 19mm thick mdf. a shelf shall be provided in the middle of left portion which shall be of 19mm thick mdf board and shall remain uncovered. two drawers and a cupboard shall be provided on the right hand side. of the bin. bottom comma sides comma back and front of drawers shall be of 12mm thick mdf board. the partition between the drawers shall be of 19mm thick mdf board. front shutter of cupboard shall be hinged with continuous piano type hing and shall be side hung. the shutter shall have eight vertical slots of 19mm width and 180mm high with gap of 19mm made in the center of the shutter. the shutter shall be provided with 100mm long mild steel powder coated handle and ball spring catch as shown on drawing. 19mm thick mdf board 543 mm long and 40mm wide shall be provided as base support in the front under the drawers. teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers. teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers on the outer sides in such a way that it rns smoothly over the beares fixed on the the sides of the partitions of the bin.
Agency / Dept :
indian army
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
23.73L
View Documents
T18 Ref No : 16729894
Location : nagpur , maharashtra
LIVE TENDER
tender for set of rubber seal of oil level gauge, set of rubber seal of oil level gauge of gear case assembly of 3 phase locomoti ves , as per dimension of : 1) od = 49 mm , id = 41 mm , thickness = 3 mm , qty. = 800 nos. 2) od = 46 mm , id = 38 mm , thickness = 3 mm , qty. = 800 nos. rubber seal material nitrile butadien e & it must resist temperature up to 130 degree centigrade. one set consists of 02 items in 1 600 nos. - warranty period: 30 months after the date of delivery
Agency / Dept :
central railway CR
Due Date :
Sep 01, 2026 (1 day left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16953018
Location : vemula , andhra pradesh
Source : GEM Tenders
LIVE TENDER
corrigendum tender for bitumenlayingwork2 , kerbstonelayingwork1 , tailingexcavationwork1 , borrowearthsoilwork3 , removinghdpeliningwork1 , dismantlingstonepitching1 , backfillingoftailing1 , laboratorytestwork15 , humepipework1 , humepipework2 , humepipework3 , humepipework4 , humepipework5 , humepipework6 , earthworkfillingforbund1 , stonepitchingwork5 , brickwork1 , brickwork2 , plasteringwork1 , plasteringwork2 , plasteringwork3 , paitingwork1 , paitingwork2 , paitingwork3 , handrailingwork3 , ccforflooringwork1 , plasteringwork4 , glasssstripswork1 , cementpunning1 , aluminumwork1 , shutterworks1 , glasspaneswork1 , siliconsealantwork1 , doorworks1 , mechanicalinstallationpumps1 , mechanicalinstallationpipes1 , mechanicalinstallationpipes2 , mechanicalinstallationpipes3 , electricallinstallation5 , mechanicalerections1 , disposalareappep1 , slimedisposalareappep1 , slimedisposalareappep2 , constructionofelectricalfacilityworklumpsum1 , panelneartaillingpond , automaticpowerfactorcorrectionpanel1 , batterychargerdcboard , lcsmushroomheadstay1 , lcsmushroomheadstay2 , lcsmushroomheadstay3 , distributiontransformer1 , dieselgeneratorset1 , dieselgeneratorfounation1 , ltbusduct1 , htswitchgearincomingpanel1 , htswitchgearincomingpanel2 , mainlightingdistributionboard1 , sublightingdistributionboard , highmastlighting1 , highmastlighting2 , lighteningfixture1 , ltpowercables1 , htpowercables1 , htpowercables2 , ltcontrolcables , junctionboxes1 , earthinglightningitems1 , aircondition1 ,, construction of 4th stage tailing pond, stripping and clearing the site of jungles, bushes, shrubs, wood etc., uprooting of rank vegetation, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level, removal of undesirable materials etc. including removal and disposal of debris at suitable locations with all leads and lifts, as decided by the engineer-in-charge., felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unserviceable material at suitable ocations as decided by the engineer-in-charge. beyond 30 cm girth upto and including 60 cm girth, felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unserviceable material at suitable ocations as decided by the engineer-in-charge. beyond 60 cm girth upto and including 120 cm girth, felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unserviceable material at suitable ocations as decided by the engineer-in-charge. beyond 120 cm girth upto and including 240 cm girth, earth work in excavation in development of embankment profile in the following types of soils for all lifts, including taking adequate protection during excavation, drilling and transporting the excavated spoil / material after stripping of top soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation in development of embankment profile in the following types of soils for all lifts, including taking adequate protection during excavation, drilling and transporting the excavated spoil / material after stripping of top soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. ordinary rock, earth work in excavation in development of embankment profile in the following types of soils for all lifts, including taking adequate protection during excavation, drilling and transporting the excavated spoil / material after stripping of top soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond.hard rock (blasting prohibited), earth work in excavation of hillocks within existing pond area in the following types of soils for all lifts, transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead and lift within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation of hillocks within existing pond area in the following types of soils for all lifts, transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead and lift within acquired area of tailing dam & pond. ordinary rock, earth work in excavation of hillocks within existing pond area in the following types of soils for all lifts, transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead and lift within acquired area of tailing dam & pond. hard rock (blasting prohibited), earth work in excavation in bed layer -1 in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, transporting the excavated soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of the engineer-in-charge for any lead within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation in bed layer -1 in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, transporting the excavated soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of the engineer-in-charge for any lead within acquired area of tailing dam & pond. ordinary rock, earth work in excavation in pipe-support foundations, peripheral drains, culverts, diversion drain, watch towers, miscellaneous equipment foundations etc. in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, drilling and transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation in pipe-support foundations, peripheral drains, culverts, diversion drain, watch towers, miscellaneous equipment foundations etc. in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, drilling and transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. ordinary rock, earth work in excavation in pipe-support foundations, peripheral drains, culverts, diversion drain, watch towers, miscellaneous equipment foundations etc. in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, drilling and transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. hard rock (blasting prohibited), supplying and transporting earth of specified quality (as per specification and drawing) from borrow-pit i.e. the source not owned by ucil but arranged by the contractor at his own cost including all taxes, royalty etc and filling the same in bed later - 1 in layers not exceeding 250 mm above existing ground level, watering of each layer in the stipulated manner as per specification and / or direction of the engineer-in-charge and compaction by mechanical means to achieve required degree of compaction as per specification, all complete as per drawing, specification and direction of the engineer-in-charge., supplying and transporting earth of specified quality (as per specification and drawing) from borrow-pit i.e. the source not owned by ucil but arranged by the contractor at his own cost including all taxes, royalty etc and filling the same in embankment in random fill zone in layers not exceeding 250 mm in proper profile to various heights above existing ground level, watering of each layer in the stipulated manner as per specification and / or direction of the engineer-in-charge and compaction by mechanical means to acheive required degree of compaction as per specification, disposal of excess of unusable material all complete as per drawing, specification and direction of the engineer-in-charge for any lead and lift (sectional measurement for compacted filling will only be paid)., supplying and transporting clay of specified quality and property (as per specification and drawing) from borrow-pit i.e. the source not owned by ucil but arranged by the contractor at his own cost including all taxes, royalty etc and laying the same over random fill on upstream side of embankment in layers not exceeding 150 mm measured loose in proper profile, watering of each layer in stipulated manner to various heights and compacting each layer by mechanical means to achieve required degree of compaction as per specification and / or direction of the engineer-in-charge, all complete as per drawing, specification and direction of the engineer-in-charge for any lead and lift (sectional measurement for compacted thickness will only be paid)., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) over clay lining on upstream side of dam with voids filler with stone dust with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge. note - payment shall be made for the actual area of coverage of stone pitching. wastage shall not be payable., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) over random fill on downstream side of dam with voids filler with stone dust with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge. note payment shall be made for the actual area of coverage of stone pitching. wastage shall not be payable., supplying, transporting, spreading and compacting sand (average 100 mm thick) over stone pitching on upstream side of dam with all lead and lift including all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge., supplying, transporting and laying 1500 micron thick high density polyethelene (hdpe) sheet (textured on both sides) as lining over sand cushion layer on upstream side of dam, laid in position by qualified and skilled installer certified by the manufacturer and approved by the engineer-in-charge, with all lead and lift including sealing of joints (hot wedge single and dual track seaming and / or extrusion fillet seaming method or any other specialized method e.g. robotic two stitch welding etc.) of new sheets and sealing of new lining sheet with existing lining sheet with an overlap of approximately 1.0m, anchoring the new lining sheet on top of new embankment, maintaining quality control, conducting tests as per requirement of the specification, all complete as per drawing, provisions of specification and direction of the engineer-in-charge. note payment shall be made for the actual area of coverage of hdpe lining sheet. overlapping area, wastage etc. shall not be payable., supplying, transporting, laying and compacting uniformly graded stone aggregate filters within new embankment at all levels,incl shuttering, tools tackles all complete as per drawing, specification and direction of the engineer-in-charge., supplying, transporting, laying and compacting uniformly graded coarse sand filters within new embankment at all levels incl shuttering, tools tackles all complete as per drawing, specification and direction of the engineer-in-charge. (sand shall conform to is383). laying and compacting rock-fill toe dam on downstream side of embankment with following materials at all levels, all complete as per drawing, specification and direction of the engineer-in-charge., with rocks arranged by the contractor at his own cost (rate to include supply and transport also), earth work in back-filling including watering, ramming and compaction at all elevation around pipe support foundations, drain trenches etc. as per specifications and drawings and as directed by the engineer-in-charge with selected soils obtained from stacks under item no. 6 above for any lead within acquired area of tailing pond and dam. (filling shall be done in layers not exceeding 250 mm in loose thickness and watered as necessary. each layer of filling to be compacted to acheive a dry density of not less than 95% of the proctor density)., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) in diversion drain and at outfall locations with interstices between adjacent stones filled-in with stones of proper size well-driven in order to ensure tight packing and complete filling of all interstices so that no chip can be removed by hand, with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge. note payment shall be made for the actual area of coverage of stone pitching. wastage shall not be payable., earthwork in filling using earth obtained from item nos. 3, 4, 5 and 6 above in construction of embankment of access roads (total four nos. access roads) connecting top of new tailing pond embankment in layers not exceeding 250 mm in proper profile to various heights above existing ground level, watering of each layer in the stipulated manner as per specification and / or direction of the engineer-in-charge and compaction by mechanical means to acheive required degree of compaction as per specification, all complete as per drawing, specification and direction of the engineer-in-charge for any lead and lift (sectional measurement for compacted filling will only be paid)., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) on sides of embankments of access roads with voids filler with stone dust with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge., supplying site machine batched plain cement concrete of 136 nominal mix (1 cement 3 coarse sand 6 graded stone aggregate with 20 mm and down aggregates) below foundations, walls, drains, pits etc. including mixing, transporting, placing in position, compacting to proper thickness and level, curirg, maintaining proper quality control including cost of admixtures in recommended proportions as per is 9103 to accelerate/retard setting of concrete, improve workability without impairing strength and durability but excluding cost of shuttering work, all complete as per specifications, drawings and direction of the engineer-in-charge and including cost of form work., extra over item 30 bove for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. note (i) cost of shuttering and reinforcement shall be paid in respective items. (note the bidder has to quote only extra cost above the item 30 in the line item of 31, for example- if the cost of item 30 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 31 of the price part), providing, mixing, laying in position in substructure upto plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m25 grade with minimum cement content of 330 kg/cum, providing, mixing, laying in position in substructure upto plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m30 grade with minimum cement content of 350 kg/cum, extra over item 32 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. concrete of m25 grade with minimum cement content of 330 kg/cum (note the bidder has to quote only extra cost above the item 32 in the line item of 34, for example- if the cost of item 32 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 34 of the price part), extra over item 33 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying.concrete of m30 grade with minimum cement content of 350 kg/cum. (note the bidder has to quote only extra cost above the item 33 in the line item of 35, for example- if the cost of item 33 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 35 of the price part), providing, mixing, laying in position in superstructure above plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m25 grade with minimum cement content of 330 kg/cum, providing, mixing, laying in position in superstructure above plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m30 grade with minimum cement content of 350 kg/cum, extra over item 36 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. concrete of m25 grade with minimum cement content of 330 kg/cum (note the bidder has to quote only extra cost above the item 36 in the line item of 38, for example- if the cost of item 36 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 38 of the price part), extra over item 37 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. concrete of m30 grade with minimum cement content of 350 kg/cum (note the bidder has to quote only extra cost above the item 37 in the line item of 39, for example- if the cost of item 37 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 39 of the price part) (another note-2 for item nos. 23, 24, 25 and 26 (i) excess cement, if required in design mix, with respect to the minimum cement content mentioned above, shall be paid under respective item. (ii) cost of shuttering and reinforcement shall be paid through respective items.(iii) rendering of treatment at construction joint shall be carried out under supervision of manufacturer, cost of which shall be included in rate of these items. (iv) design of pipe support foundations, high mast foundations, miscellaneous pump foundations, transformer and other equipment foundations shall be under scope of the contractor. (v) contractor shall prepare design drawings and bar bending schedules for all rcc structures and submit the same to ucil for approval., supplying and laying precast reinforced cement concrete elements at any level using 20 mm and down graded crushed stones as coarse aggregate as per approved design mix including supply of materials / labour / tools and tackles etc. as required, formwork, mixing, laying, compacting to proper size and thickness, curing, storing, handling, transporting, erection without damage etc. but excluding cost of shuttering and reinforcement, all complete as per drawings, specifications and direction of the engineer-in-charge. concrete of m25 grade with minimum cement content of 330 kg/cum note (i) excess cement, if required in design mix, with respect to the minimum cement content mentioned above, shall be paid under respective item. (ii) cost of shuttering and reinforcement shall be paid in respective items., add for consumption of extra / excess cement, if required, in design mix concrete (item no. 23 to 26 above) over the specified minimum cement content in respective items mentioned above. note i) requirement of extra cement with respect to the minimum cement content mentioned against respective items of approved design mix of concrete to achieve the characteristic strength for each design mix must be approved by engineer-in-charge during mix design stage based on laboratory test results which must also be approved by the engineer-in-charge..(ii) payment shall be on the basis of actual quantity of cement used in mix concrete executed., supplying, installing, dismantling and removing shuttering for foundations and substructures upto plinth level in all kinds of rcc work for all leads and lifts including necessary rendering of concrete surfaces after exposure, maintaining proper quality control, supervision etc., all complete as per drawings, specification and direction of engineer-in-charge. notes for the above item nos. i) the design of formwork/staging shall be submitted by the contractor to ucil for approval before commencement of work., supplying, installing, dismantling and removing shuttering for superstructures above plinth level in all kinds of rcc work for all leads and lifts including necessary rendering of concrete surfaces after exposure, maintaining proper quality control, supervision etc., all completer as per drawings, specification and direction of engineer-in-charge. notes for the above item nos. i) the design of formwork/staging shall be submitted by the contractor to ucil for approval before commencement of work., supplying, straightening, cutting, bending, binding with 2 nos. 20 gauge annealed soft iron wire and placing in position following types of reinforcement, of all diameters to all types of rcc members in substructure upto plinth level including all lifts and leads, maintaining proper quality control, supervision, provision of necessary chairs/spacers, tying and bending of dowel bars, cover blocks of same grade of concrete, preparation of bar bending schedule and getting the same approved from ucil before construction, all complete as per drawings, specification and direction of the engineer-in-charge. thermo-mechanically treated (tmt) bars of grade fe-500d conforming to is1786. note for above items. i) the supply of fe 500d tmt bars conforming to is 1786 (latest) shall be fromm/s sail, iisco, rinl, tata steel and jindal from their own plants rolled from virgin material only.ii) reinforcement steel bars from rerollers of the above manufacturers will not be accepted iii) no extra payment shall be made on account of rolling margin and wastage iv) contractor shall supply copies of the documentary evidence of purchase of steel, test certificates from these manufacturers (steel either directly purchased or through their dealers)and also tests from third party, if required, to be arranged at no extra cost.v) welding weights, weight of binding wires etc. shall not be measured for payment but the cost of the same shall be deemed to have been included in the quoted rate.vi) chairs and spacers provided will not be paid extra.vii) preparation of bar bending schedule for reinforcement in all types of rcc structures will be prepared by the contractor and submitted to ucil for approval., supplying, straightening, cutting, bending, binding with 2 nos. 20 gauge annealed soft iron wire and placing in position following types of reinforcement, of all diameters to all types of rcc members in superstructure above plinth level including all lifts and leads, maintaining proper quality control, supervision, provision of necessary chairs/spacers, tying and bending of dowel bars, cover blocks of same grade of concrete, preparation of bar bending schedule and getting the same approved from ucil before construction, all complete as per drawings, specification and direction of the engineer-in-charge. thermo-mechanically treated (tmt) bars of grade fe-500d conforming to is1786. note for above items. i) the supply of fe 500d tmt bars conforming to is 1786 (latest) shall be fromm/s sail, iisco, rinl, tata steel and jindal from their own plants rolled from virgin material only.ii) reinforcement steel bars from rerollers of the above manufacturers will not be accepted iii) no extra payment shall be made on account of rolling margin and wastage iv) contractor shall supply copies of the documentary evidence of purchase of steel, test certificates from these manufacturers (steel either directly purchased or through their dealers)and also tests from third party, if required, to be arranged at no extra cost.v) welding weights, weight of binding wires etc. shall not be measured for payment but the cost of the same shall be deemed to have been included in the quoted rate.vi) chairs and spacers provided will not be paid extra.vii) preparation of bar bending schedule for reinforcement in all types of rcc structures will be prepared by the contractor and submitted to ucil for approval., supplying, fabricating and installing mild steel anchor bolts / holding down bolts, pipes, sleeves, inserts, hangers, conduits and any other mild steel, cast iron, g.i.cast steel and other fixures including lugs in cement concrete, including necessary templates for keeping them in position and with welding, bending to the required shape, if necessary and prime coat and final painting whereever necessary/applicable, cost of scaffolding, as required, at all leads and lifts, storing, handling, transporting, erection without damage, placing in position, maintaining proper quality control etc. all complete as per drawings, specification and direction of engineer-in-charge. note i) all materials shall be from m/s sail, iisco, rinl and tata steel from their own plants rolled from virgin material only. ii) welding weights, connections, bolts and nuts etc. shall not be measured for payment but the cost of which shall be deemed to have been included in the quoted rate. iii) contractor shall supply copies of the documentary evidence of purchase of steel, test certificates from these manufacturers and also tests from third party, if required, to be arranged at no extra cost. iv) all holes will be made by drilling only. gas cutting of holes will not be permitted. v) electrodes manufactured by m/s advani oerlikon, esab india, indian oxygen and dandh secheron only shall be used., taking delivery from ucil, handling, transporting and installing in cement concrete at all elevations anchor bolts, anchors, pipes, sleeves, inserts, hangers, conduits and any other mild steel, cast iron, g.i.cast steel and other fixures, cost of scaffolding, as required, placing in position, maintaining proper quality control etc. all complete as per drawings, specification and direction of engineer-in-charge.. note i) the fabricated embedded items including lugs etc. shall be supplied by ucil., supplying, fabricating and installing structural steel work conforming to is 2062 (grade e250, quality b0) in all kinds of work for pipe and cable supports at top of dam/embankment at all elevations including straightening of raw steel (if required), cutting, making edge preparation, making connections at fabrication yard by welding / bolting, hoisting, fixing in position by welding / bolting, cleaning and preparation of all steel, storing, loading, transportation, unloading, delivery at erection site, maintening proper quality control, surface preparation for painting, erection, alignment and connections of all structures true to line, level, plumb and dimension including rectification, if any, splicing, applying a primer coat of approved make before erection and two coats of final paint of approved make after erection and final alignment, preparation of design d
Agency / Dept :
uranium corporation of india limited UCIL
Due Date :
Sep 03, 2026 (3 days left)
Tender Value :
172Cr
View Documents
T18 Ref No : 16940073
Location : mumbai , maharashtra
LIVE TENDER
tender for new hoarding of tentative dimension 40'x40 and orientation (v shape) = 3200 sq.ft. to be erected as per guidelines for structural design and jpo dated 04.07.2019 location: site marked towards badlapur lowere side road from height gauge between 3th & 4th coloumn note: digging work to be done manually.
Agency / Dept :
central railway CR
Due Date :
Sep 08, 2026 (8 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16919790
Location : danta , gujarat
Source : GEM Tenders
LIVE TENDER
tender for big deep freezer , electric weight machine , gravy machine , dough kneader machine 20l , chapati bhatti big , ss stock pot range single burner , gas chulha , lighter , cooker for idli-khamaan etc. with gas burner , cooker 80l , pot rack at least 5 shelf , ss work table with b.s , dish rack-stand , roti bumper - insulated container , rice husker , belan-patia-chakla , knife , chalni-chhalni , bucket , large bowl-donge , doi for tea making , pata-patia for sabji cutting etc , tavita-kharpa-khurpi big size , tavita- kharpa-khurpi small size , chimta , chini-grater , bundi jhara , kulvadi jhara , rice jhara , bhagona big size with cover , bhagona small size with cover , bhagona medium size with cover , friying pan , parat big size , large tray- patre for sweet , large masala peti , five-compartment steel plate , spoon , steel glass , steel snack dish , jug , choras -steal tin , ss- spice trolley-steam cooking system , steel donge katori , s.s.pawali , s.s. pawali big size , s.s. steel tea pot -hot , s.s. golchi chamcha , s.s.bhatiya chamcha , s.s. long handle dal doya, supply of kitchen equipments and utensils, as per atc specification, ms gp body, ss platform with a digital instrument panel connected on a vertical stand with a backlit display, isi specified brand and approved by weight and measures department material, legal metrology approval-model approval certificate, standard company 200 kg capacity, bis standard,stamping and calibration certificate, size - 30 inch x 30 inch two to five year warranty-guaranty, stainless steel -304,grade food grade certificate nabl lab approved,motar isi marked and 100 percent copper widing,iso 9001-2015-iso 22000 food safety standard,3- hp jumbo modal,wt.-40 to 50 kg,capacity 100-150 kg per hour,one to two year warranty -guaranty, bowl ss-304 material,motar isi standard,iso 9001-2015-iso 22000 food safety standard, motar- 1.5 hp,weight of machine-135to150 kg,capacity-20to25 kg, machine size 44x25x40,bowl thickness-1.5to2.5 mm,single phase power,one year warranty-gauranty, material of puffer -stainless steel -304,chapati plate-m s material,fual type-lpg, number of burners-2,top shape-rectangular size- 24-w inch, x 48-l inch, x 32 inch height, , with pipe regulatur,standard company, one year warranty/gauranty, stainless steel 304 material,size - 18 inch l.x 18 inch w.x 18 inch height with pipe regulatur standard company one year warranty-gauranty, stainless steel 304 material size - 24 inch l. x 24 inch w. x 18 inch height with pipe regulatur standard company one year warranty/gauranty, ms chulha, size- 15 inch l. x 15 inch w. x 12 inch height one year warranty/gauranty, size- 18 inch long branded company one year warranty/gauranty, stainless steel 304, 144 piece idli capacity, standard company 12 tray set with idli and khaman tray one year warranty/gauranty, aluminium material capacity- 80 liter, branded company five year warranty/gauranty, stainless steel 304, size - 15 inch depth x 36 inch width x 60 inch height, stainless steel 304, 4 - foundations with rolling wheel size - 30 inch x 60 inch x 30 inch height, stainless steel 304 150 dish,storage, stainless steel -304 material, double wall insulated roti hot box, capacity- 500 to 800 roti, capacity - 25 ltr, stainless steel 304 material - 20 to 22 guage size- 24 nos, wooden material,center portion thick design-wooden material,size-10 nos, ss material with wooden hendal, total lenth 12 inch, ms-galvanized material, size- 5 nos set- 4 peace, balti, ss, size- 3 nos, 10 ltr capacity, stainless steel -304 , bowl-deep design, size- 18 nos with doya serving spoon size- 6 nos set, ss material, size- 10 noc with handle, wooden material, size- 24 inch x 24 inch, stainless steel 304 material, 60 inch lenth, stainless steel 304 material, 36 inch lenth, stainless steel 304 material long size- 25 nos, stainless steel 304 material, 10 inch x 12 inch, ms material -16 to 20 guage, standard deisgn with wooden handle, size-24 nos, ms material -16 to 20 guage standard deisgn with wooden handle, size- 24 nos, ms material -16 to 20 guage handle end with wooden design size-24 nos, stainless steel -304, size- 60 nos, capacity-190 liter, bottom thickness- 5 mm, side thickness -3 mm , with kada handle and dhakkan-lid par piece approx weight 60 k.g, stainless steel -304, size- 58 nos, capacity-170 liter, bottom thickness- 5 mm, side thickness -3 mm , with kada handle and dhakkan-lid par piece approx weight 55 k.g, stainless steel -304, size- 56 nos, capacity-155 liter, bottom thickness- 5 mm, side thickness -3 mm, with kada handle and dhakkan-lid par piece approx weight 50 k.g, stainless steel -304, size- 54 nos, capacity-140 liter, bottom thickness- 5 mm, side thickness -3 mm, with kada handle and dhakkan-lid par piece approx weight 45 k.g, stainless steel -304, size- 38 nos, capacity-50 liter, bottom thickness- 5 mm, side thickness -3 mm, with kada handle and dhakkan-lid par piece approx weight 35 k.g, ms material size- 24 nos approx weight-25 k.g with kada handle par piece approx weight 25 k.g, stainless steel -304, size- 40 nos, gauge- 22, with kada-handle par piece approx weight 11 k.g, stainless steel -304,material 16 to 20 guage, size- 24 inch x 18 inch x 2 inch depth par piece approx weight 3 k.g, stainless steel 304, material 16 to 20 -guage, per box capacity- 500gm, 12 box set design total approx weight 12 k.g, stainless steel 304, size 15 nos, per piece approx- 500 gm weight, stainless steel 304, stainless steel 304, 250 ml capacity, stainless steel 304, size 7 nos, ss material-size-15 nos,capacity-2 ltr, ss round tin,size-20 nos-thicknes -5 mm, attached lid type, ss material 202 8pot masala troly,product weight 25kg, and pot capacity 4 ltr, ss material-202, 22-gauge,capacity-180 to 220 ml 12 peice set, ss material 202, capacity 20ltr, without copper base, ss material 202, capacity 30ltr, without copper base, stainless steel 202,weight approx5.25 kg,capacity-20 litres, material ss mode,style soup ladle,dimensions-31.8-9-5 cm,handle 22.8 cm-diameter 9 cm-capacity 280 ml-weight 156 g., material ss,1.8 heavy gauge,dimension-38.5l -11w cm, 4 of set, material ss mode,style soup,ladle, dimensions-31.8-9-5 cm handle 22.8 cm,diameter 9 cm, capacity 280 ml, weight 156 g.
Agency / Dept :
tribal development department TDD
Due Date :
Sep 05, 2026 (5 days left)
Tender Value :
12.37L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16980332
Location : mumbai , maharashtra
LIVE TENDER
tender for pocket size mini tyre defect gauge, pocket size mini tyre defect gauge suitable for measurement of the following wheel defects i n broad gauge coaching stock: (a) excessively worn tread or deep flange, (b) small root radius at wheel fla nge root, (c) thin flange, (d) sharp flange, and (e) flat tyre. the gauge shall be made of hardened stainless- steel plate with a thickness of approximately 3.0-3.8 mm and dimensional accuracy within +/-0.05 mm. th e gauge shall be lightweight pocket type, approximately 135 g in weight (without case), and suitable for fiel d/depot use. the gauge shall be equivalent in design and functionality to pie model mtdg-1-2250 or equiva lent reputed oem conforming to indian railway requirements. each gauge shall be supplied complete with a durable carrying case with belt holster, instruction manual, and a valid calibration certificate traceable to nabl-accredited or government-approved calibration laboratory. - warranty period: 30 months after the date of delivery
Agency / Dept :
central railway CR
Due Date :
Sep 11, 2026 (11 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 15603949
Location : gandevi , gujarat
Source : GEM Tenders
corrigendum tender for bi facial solar panel 550 watt , topcon solar panel 610 watt , cut section of gate valve,globe valve,ball valve,diapharm valve,needle valve,check valve,safety valve,butterfly valve,pnematic control valve 4 inch diameter , cut section of centrifugal pump,gear pump,multistage c f pump,reciprocating pump,screw pump , cut section of shell and tube heat exchanger acrylic material , cut section of reactor with accessories motor,agitatot,support leg,nozzle,manhole,baffels,thermo well,bottom valve , gauge manifold with gauges different size of hoses for r134a,r22,r32 and r 410 , wash bag cover jacket for ac service indore 1 point 5 ton,2 point 5 ton capacity , safety belt, industrial type full body protection double rope double hook,100 kg human weight , embroidery machine , brake test arrangement with two spring balance 0 to 25 kg rating , automatic motor coil winding machine with step arbor , three phase variable auto transformer ac varic 3 phase , 0 to 440v, 25a, 50 hz , synchronous motor, with accessories , vfd ac drive ac motor drive with vvvf control 3 phase , single phase transformer, core type, air cooled,1 kva,240 or 415 v,50hz , stepper motor with digital controller , bipolar , 12v dc , input pulse 5v, step angle 1 point 8 , power supply 230 v ac , oprating condition 0 to 40 deg c , bldc motor fan with controller 40 watt , servo motor with contoller 300rpm,12v dc,6mm dia and 15mm legth shaft ,holding torque 30kg cm,no load current 0 point 8 amp,full load current 7 point 5 amp , electrical test bench integrated with 0 to270v ac variac 25a, ppp boq1, bi facial solar panel 550 watt,efficiency 21.3 percentage,dimension 2285mm x 1134mm x 35 mm,anodized aluminumsilver frame,connector mc4 ev02,maximum system voltage 1500v dc, topcon solar panel 610 watt,efficiency 22 point 6 percent to 22 point 9 percent,n type topcon,dimension 2382x1134x30 mm,2 mm dual glass,maximum system voltage 1500v dc, cut section of gate valve,globe valve,ball valve,diapharm valve,needle valve,check valve,safety valve,butterfly valve,pnematic control valve 4 inch diameter, cut section of centrifugal pump,gear pump,multistage c f pump,reciprocating pump,screw pump, cut section of shell and tube heat exchanger acrylic material, cut section of reactor with accessories motor,agitatot,support leg,nozzle,manhole,baffels,thermo well,bottom valve, gauge manifold with gauges different size of hoses for r134a,r22,r32 and r 410, wash bag cover jacket for ac service indore 1 point 5 ton,2 point 5 ton capacity, safety belt, industrial type full body protection double rope double hook,100 kg human weight, embroidery machine highlighted upper and lower tread sensors,auto adjustable tread tension,automaticneedle treader embroidery designs 227,lcd display included usb cable,embroidery erea 300 x 200 mm,maximum speed 1050 stitch per mi, brake test arrangement with two spring balance 0 to 25 kg rating with flat belt with 3 pullies having inner diameter 17 mm,23mm, 29mm and width of 2 inch, automatic motor coil winding machine with step arbor, three phase variable auto transformer ac varic 3 phase , 0 to 440v, 25a, 50 hz, synchronous motor, with accessories like starter, excitation arrangements,3 phase, 3hp, 440 v, 50hz, 4 pole ac voltmeter, dc voltmeter , ac ameter , dc ameter , watt meter panel with desk and drawer lock key panel total height 170 cm , width 75 cm, horizontal desk size 40 cm,drawer size 33cm x 12 cm 2 drawers,component fitting area at top 120 cm x 60 cm, vfd ac drive ac motor drive with vvvf control 3 phase, 7 point 5 hp panel with desk & drawer lock key panel total height 170 cm,width 75 cm, horizontal desk size 40 cm,drawer size 33cm x 12 cm 2 drawers , component fitting area at top 120 cm x 60 cm, single phase transformer, core type, air cooled,1 kva,240 or 415 v,50hz, stepper motor with digital controller , bipolar , 12v dc , input pulse 5v, step angle 1 point 8 , power supply 230 v ac , oprating condition 0 to 40 deg c, bldc motor fan with controller 40 watt, servo motor with contoller 300rpm,12v dc,6mm dia and 15mm legth shaft ,holding torque 30kg cm,no load current 0 point 8 amp,full load current 7 point 5 amp, electrical test bench integrated with 0 to270v ac variac 25a 01 no, dc variac 0 to 270v dc 25a 01 no, dc ameter 0 to 25a 03 nos , dc voltmeter 0 to 750 volt 03 nos, ac ammeter 0 to 25 a 03 nos, ac voltmeter 0 to 750v03 nos,1 phase power factor meter01 no ,3 phase power factor meter01 no, frequency meter 45 to 55 hz 01 no, watt meter 0 to 3000w02 nos,1 phase energy meter01 no, 3 phase energy meter01 no all equipments with seperate contact terminals and all meters are digital
Agency / Dept :
department of employment and training DET
Due Date :
Jun 04, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15634831
Location : baramulla , jammu & kashmir
Source : GEM Tenders
tender for ismc 200 x 75mm , pre fab welded window loop hole lintel made out of 02 nos ismc 200 x 75mm , 0.60mm thick ppgi sheets size 810x3050mm , 3.00 m long rectangular hollow section , 2.30m long rectangular hollow section , 150mm long ms angle , cable pvc insulated of size 1.5 sqmm , switch socket combination 16a 3 5 pin , 6a one way single module flush type modular switch , supply 10 inch x 8 inch first class teak wood switch boards , supply 7 inch x 4 inch first class teak wood switch boards , supply 4 inch x 4 inch first class teak wood switch boards , 32a spn or dp main switches , 16a 240v two pole dp changeover switches , 18w led tube and fitting 4ft , 20w led self ballasted lamps , flexible wire pvc insulated twin core twisted , 25mm x 16mm pvc casing capping profile , 20mm pvc casing capping l bend elbow , pvc casing capping square box 4 x 4 , 20 mm ms drywall cross recessed screws bugle head , 25 mm ms drywall cross recessed screws bugle head , plasticized pvc insulation tape , pvc saddle clip 20 mmconforming , supply b22 bakelite pendant holders , pvc insulated cable and pvc sheathed 2.5 sq mm 1 core , mcb single pole 230v ac 50 hz, 16 amps 10 ka , mcb single pole 230v ac 50 hz 6 amps 10 ka , mcb distribution boards in sheet metal enclosure 8 ways , switch socket combination 6a 3 5 pin flush type , 20mm high-impact pvc junction boxes 2 way and 3 way , 25mm high grade pvc expansion wall plugs precision molded from virgin polymer , 9 inch x 11 inch 225mm x 275mm phenolic resin-bonded laminated sheets , 8 inch x 5 inch 225mm x 275mm phenolic resin- bonded laminated sheets , 5 inch x 5 inch 225mm x 275mm phenolic resin-bonded laminated sheets , bricktrowel , drop forged high grade carbon steel brick hammer , lightweight extruded aluminum alloy straight edge , plaster trowel , 16 inch 400mm diameter mortar pan tasla , high tenacity nylon monofilament line , cast iron plumb bobs , heavy duty metal hand rammers , heavy duty pickaxes , shovel square , single piece hot forged carbon steel powra , high quality heavy duty flat painting brush , non slip heavy duty industrial rubber gloves , aluminium spirit levels 12 inch 300 mm , transparent flexible pvc water leveling tubes , heavy duty combination cutting pliers , non metallic fiberglass measuring tape 15mtr , wooden flat gurmala , 6mm high speed steel hss parallel shank twist drills , 8 mm high speed steel hss parallel shank twist drills , 10 mm high speed steel hss parallel shank twist drills , non metallic fiberglass measuring tape 15 m , prefabricated gel earthing electrode , gi pipe 100 mm dia med grade , back filled compound , ms earth pit cover of size 30 cm x 30 cm with handle , aluminium strip , iron spikes 16 inch long , gi strip of size 32 x 6mm 3.00m long , gi nipple 20mm dia and 10cm long , gi reducer socket 40x20mm , lightning air terminal a copper tube 150 cm long x 25 mm dia , ms clamp 40x2mm with nut and bolt complete. , gi wire 12 gauge , earth augur , upvc pipe 3m long 6 inch dia , user manual , tester set , gi pipe medium grade 40mm dia 6 mtr long , gi pipe 40 mm bore 2m long , 50 mm bore gi pipes, svl pds, svl pd in trepezium shape with dimension 2.4 x 2.4 m with a height of 3.0 m double story, soakage pit cover made of 1mm thick ms sheet, natural sand m sand, aggregate 20mm, aggregate 40mm, aggregate 63mm, load bearing concrete pcc soild blocks, common burnt clay building bricks, integral water proofing compound, mild steel tmt bars 16 mm dia, mild steel tmt bars 12 mm dia, mild steel tmt bars 10 mm dia, mild steel tmt bars 08 mm dia, ms binding wire, ply wood 2.00m x 0.30m and 12mm thick, ply wood 10 mm thick, ismb size 150 x 75mm, ismb size 150 x 75mm 2m long, steel roofing trough srt size 2000x613x180mm, steel roofing trough srt size 1600x613x180mm, hdpe sand bag of size 75x40 cm, pbs roll hessian bas, silicone gel sealant, bitumen for filling of expansion joint of pcc, hdpe sheet having weight 100 gm sqm in black colour, prefabricated steel loop window size 600mm x450mm, prefabricated steel door size 900mm x1800mm, pre fabricated steel shutter loop hole size 2200mm x600mm, pre fabricated steel shutter loop hole size 1200mm x600mm, synthetic enamel paint olive green, red oxide primer, oil bound distemper, polyurethane thinner, chalk white, cement base paint, 10 mm thick m.s. base plate of size 400 x 400 mm, column ismb 250x175 56.90kg rm 3 mtr long, beam ismb200x100mm, beam ismb150x75mm 15kg rm, 8mm thick ms plat, normal nut,bolts 150mm long 16mm dia, 8mm thick ms plate for first floor 2.4 x 2.2mtr, 6 mm thick gable side wall ms sheet 14 nos, ms steel angle 65x65x6mm, 8mm thick ms plate 0.15 x 0.15mtr, m.s. hexagon head bolts and nuts of size m12 x 150 mm, foundation bolt 450 mm long, hydrophobic poreblocking ingredients, pre fab welded door lintel made out of 02 nos ismc 200 x 75mm, pre fab welded window loop hole lintel made out of 02 nos ismc 200 x 75mm, 0.60mm thick ppgi sheets size 810x3050mm, 3.00 m long rectangular hollow section, 2.30m long rectangular hollow section, 150mm long ms angle, cable pvc insulated of size 1.5 sqmm, switch socket combination 16a 3 5 pin, 6a one way single module flush type modular switch, supply 10 inch x 8 inch first class teak wood switch boards, supply 7 inch x 4 inch first class teak wood switch boards, supply 4 inch x 4 inch first class teak wood switch boards, 32a spn or dp main switches, 16a 240v two pole dp changeover switches, 18w led tube and fitting 4ft, 20w led self ballasted lamps, flexible wire pvc insulated twin core twisted, 25mm x 16mm pvc casing capping profile, 20mm pvc casing capping l bend elbow, pvc casing capping square box 4 x 4, 20 mm ms drywall cross recessed screws bugle head, 25 mm ms drywall cross recessed screws bugle head, plasticized pvc insulation tape, pvc saddle clip 20 mmconforming, supply b22 bakelite pendant holders, pvc insulated cable and pvc sheathed 2.5 sq mm 1 core, mcb single pole 230v ac 50 hz, 16 amps 10 ka, mcb single pole 230v ac 50 hz 6 amps 10 ka, mcb distribution boards in sheet metal enclosure 8 ways, switch socket combination 6a 3 5 pin flush type, 20mm high-impact pvc junction boxes 2 way and 3 way, 25mm high grade pvc expansion wall plugs precision molded from virgin polymer, 9 inch x 11 inch 225mm x 275mm phenolic resin-bonded laminated sheets, 8 inch x 5 inch 225mm x 275mm phenolic resin-bonded laminated sheets, 5 inch x 5 inch 225mm x 275mm phenolic resin-bonded laminated sheets, bricktrowel, drop forged high grade carbon steel brick hammer, lightweight extruded aluminum alloy straight edge, plaster trowel, 16 inch 400mm diameter mortar pan tasla, high tenacity nylon monofilament line, cast iron plumb bobs, heavy duty metal hand rammers, heavy duty pickaxes, shovel square, single piece hot forged carbon steel powra, high quality heavy duty flat painting brush, non slip heavy duty industrial rubber gloves, aluminium spirit levels 12 inch 300 mm, transparent flexible pvc water leveling tubes, heavy duty combination cutting pliers, non metallic fiberglass measuring tape 15mtr, wooden flat gurmala, 6mm high speed steel hss parallel shank twist drills, 8 mm high speed steel hss parallel shank twist drills, 10 mm high speed steel hss parallel shank twist drills, non metallic fiberglass measuring tape 15 m, prefabricated gel earthing electrode, gi pipe 100 mm dia med grade, back filled compound, ms earth pit cover of size 30 cm x 30 cm with handle, aluminium strip, iron spikes 16 inch long, gi strip of size 32 x 6mm 3.00m long, gi nipple 20mm dia and 10cm long, gi reducer socket 40x20mm, lightning air terminal a copper tube 150 cm long x 25 mm dia, ms clamp 40x2mm with nut and bolt complete., gi wire 12 gauge, earth augur, upvc pipe 3m long 6 inch dia, user manual, tester set, gi pipe medium grade 40mm dia 6 mtr long, gi pipe 40 mm bore 2m long, 50 mm bore gi pipes sleeve, crystaline condcutive mixture ccm
Agency / Dept :
indian army
Due Date :
Jun 13, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15672376
Location : gandevi , gujarat
Source : GEM Tenders
corrigendum tender for bi facial solar panel 550 watt , topcon solar panel 610 watt , cut section of gate valve,globe valve,ball valve,diapharm valve,needle valve,check valve,safety valve,butterfly valve,pnematic control valve 4 inch diameter , cut section of centrifugal pump,gear pump,multistage c f pump,reciprocating pump,screw pump , cut section of shell and tube heat exchanger acrylic material , cut section of reactor with accessories motor,agitatot,support leg,nozzle,manhole,baffels,thermo well,bottom valve , gauge manifold with gauges different size of hoses for r134a,r22,r32 and r 410 , wash bag cover jacket for ac service indore 1 point 5 ton,2 point 5 ton capacity , safety belt, industrial type full body protection double rope double hook,100 kg human weight , embroidery machine , brake test arrangement with two spring balance 0 to 25 kg rating , automatic motor coil winding machine with step arbor , three phase variable auto transformer ac varic 3 phase , 0 to 440v, 25a, 50 hz , synchronous motor, with accessories , vfd ac drive ac motor drive with vvvf control 3 phase , single phase transformer, core type, air cooled,1 kva,240 or 415 v,50hz , stepper motor with digital controller , bipolar , 12v dc , input pulse 5v, step angle 1 point 8 , power supply 230 v ac , oprating condition 0 to 40 deg c , bldc motor fan with controller 40 watt , servo motor with contoller 300rpm,12v dc,6mm dia and 15mm legth shaft ,holding torque 30kg cm,no load current 0 point 8 amp,full load current 7 point 5 amp , electrical test bench integrated with 0 to270v ac variac 25a, ppp boq1, bi facial solar panel 550 watt,efficiency 21.3 percentage,dimension 2285mm x 1134mm x 35 mm,anodized aluminumsilver frame,connector mc4 ev02,maximum system voltage 1500v dc, topcon solar panel 610 watt,efficiency 22 point 6 percent to 22 point 9 percent,n type topcon,dimension 2382x1134x30 mm,2 mm dual glass,maximum system voltage 1500v dc, cut section of gate valve,globe valve,ball valve,diapharm valve,needle valve,check valve,safety valve,butterfly valve,pnematic control valve 4 inch diameter, cut section of centrifugal pump,gear pump,multistage c f pump,reciprocating pump,screw pump, cut section of shell and tube heat exchanger acrylic material, cut section of reactor with accessories motor,agitatot,support leg,nozzle,manhole,baffels,thermo well,bottom valve, gauge manifold with gauges different size of hoses for r134a,r22,r32 and r 410, wash bag cover jacket for ac service indore 1 point 5 ton,2 point 5 ton capacity, safety belt, industrial type full body protection double rope double hook,100 kg human weight, embroidery machine highlighted upper and lower tread sensors,auto adjustable tread tension,automaticneedle treader embroidery designs 227,lcd display included usb cable,embroidery erea 300 x 200 mm,maximum speed 1050 stitch per mi, brake test arrangement with two spring balance 0 to 25 kg rating with flat belt with 3 pullies having inner diameter 17 mm,23mm, 29mm and width of 2 inch, automatic motor coil winding machine with step arbor, three phase variable auto transformer ac varic 3 phase , 0 to 440v, 25a, 50 hz, synchronous motor, with accessories like starter, excitation arrangements,3 phase, 3hp, 440 v, 50hz, 4 pole ac voltmeter, dc voltmeter , ac ameter , dc ameter , watt meter panel with desk and drawer lock key panel total height 170 cm , width 75 cm, horizontal desk size 40 cm,drawer size 33cm x 12 cm 2 drawers,component fitting area at top 120 cm x 60 cm, vfd ac drive ac motor drive with vvvf control 3 phase, 7 point 5 hp panel with desk & drawer lock key panel total height 170 cm,width 75 cm, horizontal desk size 40 cm,drawer size 33cm x 12 cm 2 drawers , component fitting area at top 120 cm x 60 cm, single phase transformer, core type, air cooled,1 kva,240 or 415 v,50hz, stepper motor with digital controller , bipolar , 12v dc , input pulse 5v, step angle 1 point 8 , power supply 230 v ac , oprating condition 0 to 40 deg c, bldc motor fan with controller 40 watt, servo motor with contoller 300rpm,12v dc,6mm dia and 15mm legth shaft ,holding torque 30kg cm,no load current 0 point 8 amp,full load current 7 point 5 amp, electrical test bench integrated with 0 to270v ac variac 25a 01 no, dc variac 0 to 270v dc 25a 01 no, dc ameter 0 to 25a 03 nos , dc voltmeter 0 to 750 volt 03 nos, ac ammeter 0 to 25 a 03 nos, ac voltmeter 0 to 750v03 nos,1 phase power factor meter01 no ,3 phase power factor meter01 no, frequency meter 45 to 55 hz 01 no, watt meter 0 to 3000w02 nos,1 phase energy meter01 no, 3 phase energy meter01 no all equipments with seperate contact terminals and all meters are digital
Agency / Dept :
department of employment and training DET
Due Date :
Jun 08, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Dimension Gauge. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Dimension Gauge sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Dimension Gauge Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Dimension Gauge, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Dimension Gauge Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Dimension Gauge Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Dimension Gauge.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Dimension Gauge depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Dimension Gauge Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Dimension Gauge bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Dimension Gauge. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Dimension Gauge, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Dimension Gauge, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Dimension Gauge?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Dimension Gauge tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Dimension Gauge?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Dimension Gauge, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Dimension Gauge is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All