sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

9Latest Busbar support insulators Tenders List

Latest Busbar support insulators Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Busbar support insulators tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Busbar support insulators tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Busbar support insulators Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Busbar support insulators tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Busbar support insulators Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Busbar support insulators Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Busbar support insulators Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Busbar support insulators tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Busbar support insulators Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Busbar support insulators sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Busbar support insulators tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Busbar support insulators tenders.

Is EMD mandatory for all Busbar support insulators tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Busbar support insulators work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Busbar support insulators tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Busbar support insulators Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17252682
Location : angul , odisha
Source : GEM Tenders
NEW TENDER
tender for 35407000560 , 82729042500 , 82765000180 , 82765000190 , 82729042390 , 82729042400 , 82765000010 , 82729042520 , 82765000220 , 82765000020 , 82729042350 , 82729042360 , 34709100110 , 82765000030, schneider make breaker and breaker spares for lsp, 6 6 kv 1250 hwx vcb on truck, 11 6 6 kv schneider test serv limit sw, closing coil vcb hwx 6 6kv schneider, trip coil vcb hwx 6 6kv schneider, 11 6 6 kv schneider buffer open spring, 11 6 6 kv schneider buffer close spring, breaker trolley wheel nylon for hwx sch, 11 6 6 kv schneider micro switch assy, aux switch vcb hwx 6 6kv schneider, closing spring guide rod for hwx schneid, 11 6 6 kv schneider charging prawl, 11 6 6 kv schneider ratchet wheel, busbar support insulators, opening spring guide rod for hwx schneid
Agency / Dept :
national aluminium company limited NALCO
Due Date :
Sep 24, 2026 (9 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17150858
Location : chandrapur , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for single phase epoxy resin cast pt 3point3kv part no epoxyp0052 , thermal overload relay xa ya part no 122txy , potential transformer 3point3 kv part no htptl1 , hrc ht pt fuse part no boabwna , hv bushing part no httc , ht bushing part no htta33 , earth leakage 50 750m a and 750ma 2a dual part no elm7dlat , vaccum interrupter for 315kva 3point3kv tran part no 370600 , core balance transformer part no cbt150m , ammeter part no am , voltmeter part no vmso65 , ammeter selector switch part no bokcsrpip6ma60 , voltmeter selector switch part no bokcsrp135vs , indicating lamp with pcb mounting part no lab9 , outgoing plug 200a wtih socket crd part no dvbp1eodvbs1es , incoming plug 200 a with socket crd part no dvbp1eidvbs1es , socket main body part no , socket insulator part no 400102 , spacer for plug insulator part no 4002061 , pilot contact tube part no 400203 , main contact tube part no 400204 , neutral earthing resistor part no boner , neutral moniotring relay with resistance part no nrmr , vcb closing coil part no 501000 , vcb shunt trip coil part no 500500 , earth leakage 50 750ma and 750ma 2a dual se part no elm7dlats80m , cable grip body part no , earth plate part no 400106 , busbar part no bbr400, spares for required for mineline make tsu, single phase epoxy resin cast pt 3point3kv part no epoxyp0052, thermal overload relay xa ya part no 122txy, potential transformer 3point3 kv part no htptl1, hrc ht pt fuse part no boabwna, hv bushing part no httc, ht bushing part no htta33, earth leakage 50 750m a and 750ma 2a dual part no elm7dlat, vaccum interrupter for 315kva 3point3kv tran part no 370600, core balance transformer part no cbt150m, ammeter part no am, voltmeter part no vmso65, ammeter selector switch part no bokcsrpip6ma60, voltmeter selector switch part no bokcsrp135vs, indicating lamp with pcb mounting part no lab9, outgoing plug 200a wtih socket crd part no dvbp1eodvbs1es, incoming plug 200 a with socket crd part no dvbp1eidvbs1es, socket main body part no, socket insulator part no 400102, spacer for plug insulator part no 4002061, pilot contact tube part no 400203, main contact tube part no 400204, neutral earthing resistor part no boner, neutral moniotring relay with resistance part no nrmr, vcb closing coil part no 501000, vcb shunt trip coil part no 500500, earth leakage 50 750ma and 750ma 2a dual se part no elm7dlats80m, cable grip body part no, earth plate part no 400106, busbar part no bbr400
Agency / Dept :
western coalfields limited WCL
Due Date :
Sep 18, 2026 (3 days left)
Tender Value :
20.37L
View Documents
T18 Ref No : 16452886
Location : bangalore , karnataka
tender for supply of bushing and busbar support insulator
Agency / Dept :
mysore electrical industries limited MEIL
Due Date :
Aug 01, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16063854
Location : bellary , karnataka
tender for supply of bushing and busbar support insulator
Agency / Dept :
mysore electrical industries limited MEIL
Due Date :
Jul 09, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16240008
Location : chiplun , maharashtra
Source : GEM Tenders
tender for mat code -8395200001 , mat code -8337040001 , mat code -8337040002 , mat code -8176200001 , mat code - 8337040003 , mat code -9493260001 , mat code - 8337130001 , mat code -1022021035, hiring of oem service for siemens make panel, 8bk80 panel kit, bushing busbar / cable compartment, guide plate for fixed contact, busbar support insulator, fixed contact -lower (l1 to l3) ct/cable compartment, thermostat, space heater, hiring of siemens team for servicing & maintenance
Agency / Dept :
konkan lng limited
Due Date :
Jul 24, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16472196
Location : bhubaneswar , odisha
tender for dough moulding compound busbar support insulator., dough moulding compound busbar support insulator as per below dimension. length base = 110mm width= 50-53mm height= 65mm top length = 40mm top width =52-53mm mounting pitch = 70- 85mm - warranty period: 30 months after the date of delivery
Agency / Dept :
east coast railway ECOR
Due Date :
Jul 30, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16445685
Location : betul , madhya pradesh
Source : GEM Tenders
tender for part no olr3 3pole oil dashpot relay , part no bbbr400 busbar bbbr400 , part no t33 ht bushing , part no kie33 isolator 400a , part no botp6 mcb , part no raptor capacitor trip device , part no boplaco2 control relay , part no vmso65 voltmeter , part no bokcsrpip6ma60 ammeter selector switch , part no bokudf4 control fuse , part no boes2 contact element , part no elm7la earth leakage relay 50 750 ma 750ma with , part no bovrn15a epoxy resin cast type current transforme , part no 122txy thermal overload relay xa ya , part no htptl1 potential transformer 3 3 kv , part no boes3 contact element , part no fx220 potential transformer , part no mcra022a7 aux contactor , part no lab9 indicating lamp with pcb mounting , part no bs45 insulator support for ht pt fuse , part no ciptf clamp for ht pt fuse , part no bobp3 bullet pin up to 3 3k 300a , part no bota2dt2 off delay timer , part no 501000 vcb closing coil , part no bolso5 vcb limit switch , part no oba brass terminal with nylon bushing , part no cbt150m core balance transformer , part no bo4005ctr current transformer , part no bossr overload short circuit and motor protect , part no bokcsrp135vs voltmeter selector switch , part no boner neutral earthing resistor , part no t8 brass terminal with dmc bushing , part no pru3 pilot relay , part no bokycsrp125b test run selector switch , part no boabwna hrc ht pt fuse , part no bogf glass fuse with holder , part no boarc vcb aux rotary switch , part no nrmr neutral resistor monitring relay 100v ac , part no ss33 surge suppressor , part no htta33 h t bushing with stud 3 3 kv , part no bossabwna ht hrc pt fuse 1a , part no am ammeter , part no bev006133 vaccum contactor 3 3 kv 200 amp with , part no boca2dn1229 aux contactor with coil , part no olr3 overload relay magnetic , part no hrc100 ht power fuse 3 3kv grade upto 100a , part no elm7lats earth leakage relay 50 750 ma with time , part no cbt80m core balance transformer , part no 120100515 current transformer , part no htptl1 pt 1p 3 3kv 110v 500va , part no boes2 no nc actuator for flp , part no glfu glass fuse , part no oba terminal bushing , part no kire 3 3kv isolator on off earth reverse 400a , part no 12060515 current transformer 60 5 15va , part no bev0053 vacuum interrupter , part no 000110a cover bolts , part no 050000 isolator assly k3 on offf , part no 50100 fixed contact assy 05 01 00 mine line , part no 050200 moving contact assembly for isolator , part no 50502 micro switch , part no 110100b overload assembly breaker 110a 200a , part no 110100c overload assembly breaker 210a 300 a , part no dp300 ct operated overload , part no 110200 moving contact assembly for breaker , part no 110300 shunt trip assy 11 03 00 9 mine line , part no 110400a no volt coil assy under voltage coil as , part no 110402 no volt coilunder voltage coil , part no 110531 catcher assy 11 05 31 , part no 110600 fixed contact assembly for breaker , part no 12020055 current transformer for ammeter , part no bbr400 busbar , part no boes2 push button actuator for el test , part no boes3 reset push button contact element , part no ds potential transformer , part no lat4005 current transformer for ol , part no pbs push button with spindle , part no 5kvamllt4 terminal bushing with dmc insulator t5 , part no wr2 circuit breaker for 200a with complete a , part no wr2a complete control wiring including pla r , part no 110301 shunt trip coils , part no fcs flexible copper braids with lugs , part no gebconrl control plate chasis assy suitable for , part no 000110a cover fixing bolt , part no 120029 current transformer 15va , part no k4r on off rev isolator , part no 120022 push button actuator , part no tic copper stud with dmc insulator , part no ts2c test switch , part no 120021 thermal overload relay , part no bbr300 busbar , part no lab9geb indicating lamp with pcb mounting , part no boca2dn1229 aux contactor 220v ac , part no boes1 push element 1no plus 1nc , part no ds potential transformer type d , part no lat10015 ct for over load , part no bohrc160 hrc fuse , part no spp5cmsp single phasing preventor with module , part no 120310 magnetic overload relay , part no 139geb resistance , part no ts toggle switch , part no elm7la earth leakage relay 50750m a latchout ty , part no gfh glass fuse with holder , part no 010000 plug and socket tpye rstrnd , part no t5 terminal bushing assy with brass termin , part no k4 on off isolator 300a , part no b potential transformer , part no elm7lats earth leakage relay 50 750ma with time l , part no lat3005 current transformer for ol , part, 3pole oil dashpot relay, busbar bbbr400, ht bushing, isolator 400a, mcb, capacitor trip device, control relay, voltmeter, ammeter selector switch, control fuse, contact element, earth leakage relay 50 750 ma 750ma with, epoxy resin cast type current transforme, thermal overload relay xa ya, potential transformer 3 3 kv, potential transformer, aux contactor, indicating lamp with pcb mounting, insulator support for ht pt fuse, clamp for ht pt fuse, bullet pin up to 3 3k 300a, off delay timer, vcb closing coil, vcb limit switch, brass terminal with nylon bushing, core balance transformer, current transformer, overload short circuit and motor protect, voltmeter selector switch, neutral earthing resistor, brass terminal with dmc bushing, pilot relay, test run selector switch, hrc ht pt fuse, glass fuse with holder, vcb aux rotary switch, neutral resistor monitring relay 100v ac, surge suppressor, h t bushing with stud 3 3 kv, ht hrc pt fuse 1a, ammeter, vaccum contactor 3 3 kv 200 amp with, aux contactor with coil, overload relay magnetic, ht power fuse 3 3kv grade upto 100a, earth leakage relay 50 750 ma with time, pt 1p 3 3kv 110v 500va, no nc actuator for flp, glass fuse, terminal bushing, 3 3kv isolator on off earth reverse 400a, current transformer 60 5 15va, vacuum interrupter, cover bolts, isolator assly k3 on offf, fixed contact assy 05 01 00 mine line, moving contact assembly for isolator, micro switch, overload assembly breaker 110a 200a, overload assembly breaker 210a 300 a, ct operated overload, moving contact assembly for breaker, shunt trip assy 11 03 00 9 mine line, no volt coil assy under voltage coil as, no volt coilunder voltage coil, catcher assy 11 05 31, fixed contact assembly for breaker, current transformer for ammeter, busbar, push button actuator for el test, reset push button contact element, current transformer for ol, push button with spindle, terminal bushing with dmc insulator t5, circuit breaker for 200a with complete a, complete control wiring including pla r, shunt trip coils, flexible copper braids with lugs, control plate chasis assy suitable for, cover fixing bolt, current transformer 15va, on off rev isolator, push button actuator, copper stud with dmc insulator, test switch, thermal overload relay, aux contactor 220v ac, push element 1no plus 1nc, potential transformer type d, ct for over load, hrc fuse, single phasing preventor with module, magnetic overload relay, resistance, toggle switch, earth leakage relay 50750m a latchout ty, plug and socket tpye rstrnd, terminal bushing assy with brass termin, on off isolator 300a, earth leakage relay 50 750ma with time l
Agency / Dept :
western coalfields limited WCL
Due Date :
Aug 03, 2026
Tender Value :
53.4L
View Documents
T18 Ref No : 16121822
Location : bardhaman , west bengal
Source : GEM Tenders
tender for supply laying testing and connecting xlpe sheathed pvc insulated screened pvc size 3.5 core 240 sqmm complete all as specified and as directed. , supply installation testing and commissioning of silent type diesel engine driven generating set with governing class g2 including sound reducing canopy sound level not more than 75db , m and l earthing complete with gi steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground earth pit not less than 2.25mtr , excavating in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth getting out in soft loose soil complete all as specified and as directed. , returning filling in including spreading levelling watering and well ramming in layers not exc. 250mm in soft loose soil complete all as specified and as directed. , removing excavated materials soils not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point in soil complete all as specified and as directed. , m and l sand cushioning dry in trenches for protection of ug cables below above and around the ug cable laid in trenches of 230mm , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable complete all as specified and as directed. , s and f galvanised iron pipe 80mm bore dia light grade for protection of ug cable laid in floors road crossing , s and f hdpe dwc double walled corrugated of diameter 90 mm including disconnection and connection of cable , material and labour for manufacturing installation testing and commissioning of factory made and tested cpri approved amf , m and l for surface excavation n.exc not exceeding 30 cm deep and averaging 15cm deep , m and l for hardcore using broken stone or boulders of gauge n exc. 63 mm deposited spread and levelled in layers n exc. 15 cm thick , m and l for cement concrete in foundations filling and mass concrete type d2 1 4 8 , m and l for pcc 1 2 4 type b1 using 20mm grade aggregate as in coping for pole inclduing form work , m and l for excavating in post holes or similar holes each n exc 0.5 cu. m getting out returning filling in and ramming earth , s and f for steel work in tubular trusses cloumn purlin including special shaped washer nut bolt etc. , s and f prepainted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick , m and l for preparation of steel surfaces of any description over 10 cm , m and l for machine pressed precast concrete interlocking paver block any shape and size confirming to is 156582006 , providing and laying at or near ground level factory made kerb stone of m25 grade , m and l for preparation of concrete kerb stone or plaster surface of any description not otherwise described over 10cm , s and f 4pole 630 amp changeover switch with enclosure suitable for 415 v ac 3phase 4 wire , wrecking crow bar or claw bar as per is 706 (q3), supply, laying, testing and connecting xlpe sheathed,pvc insulated screened pvc bedded,galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volt grade of size 3.5 core 240 sqmm complete all as specified and as directed., supply, installation testing and commissioning of silent type diesel engine driven generating set with governing class g2 including sound reducing canopy (sound level not more than 75db at a distance of 1 mtr) 14 guage as per guidelines issued by central pollution control board (cpcb ivplus, 4plus), 415 volts, 3 phase, 50 hz supply complete, control panel suitable for giving an output of 250 kva and alternator of suitable capacity and rpm coupled with each other with flexible coupling mounted on anti vibration pads on foundation as recommended by manufacturer. the dg set shall comprise of self starter with batteries, turbocharger, water cooler and comprising all standard fittings, fixtures & all piping etc. as below (a) alternator directly coupled with engine and suitable to produce 415 volts, 3 phase, 4 wire system, 50 hz, 0.8 pf 1500 rpm of capacity 250 kva all as per is 13364 and upto date amendments with h class insulation, self excited, self regulated, screen protected drip proof type with two end shield ball / roller bearing with damper winding in each pole, complete all as specified and directed. (b) engine water cooled diesel engine (cpcb norms iv compliance) developing 105 bhp having self start engine (including batteries with provision of charging the batteries and leads) suitable to drive above specified alternator complete with foundation (foundation design as per oem) as per is 10001/10002, coupled directly through flexible coupling, multi cylinder four stroke, cold starting, 1500 rpm industrial type as per bs 649 or is 1601 with ai electronic governor suitable to regulate speed of dg set from no load to full load complete with fuel tank of capacity as per manufacturer s recommendation, fuel lines, exhaust pipe duly insulated with asbestos rope and with support and silencer muffiers etc. for continuous operation and standard accessories, sump pre heaters, cold start kit etc., m&l earthing complete with gi steel earth plate electrode of size 600mm x 600mm x 6mm thick, burried directly in ground, earth pit not less than 2.25mtr deep below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to the galvanised iron strip of size 25x4mm by means of bolts, nuts, check nuts and washers of galvanised steel and earth lead protected by provision of 40mm bore gi pipe medium grade and including provision of concrete pit in pcc 1 2 4 type b 1 (using 20mm grade crushed stone aggregate) with 40mm thcik rcc (type b 1) cover reinforced with 8mm dia tmt bar both ways with 12mm dia round bar handle and frame of angle iron 25x25x3mm with lugs 02 nos and 20mm bore gi light grade watering pipe with funnel and wiremesh and filling common salt and charcol and test point with fixing arrangements and including necessary excavation in any type of soil, returning filling in and removing excavated soil to a distance of 50mtr from the site, complete all as shown on electrical plate no 3 of mes ssr part i and directed., excavating in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth, getting out in soft / loose soil, complete all as specified and as directed., returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm in soft/loose soil, complete all as specified and as directed., removing excavated materials (soils) not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point in soil, complete all as specified and as directed., m&l sand cushioning (dry) in trenches for protection of ug cables (below, above and around the ug cable laid in trenches) of 230mm spread thickness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. (note for the purpose of payment, punned thickness of sand cushioning only shall be measured and paid)., m&l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable, complete all as specified and as directed., s&f galvanised iron pipe 80mm bore (dia) light grade for protection of ug cable, laid in floors/ road crossing, fixing to pole with mild steel clamps, nuts, bolts, etc., complete all as specified and as directed., s & f hdpe dwc (double walled corrugated) of diameter 90 mm including disconnection and connection of cable near panel/oh for pipe fixing including joints complete all as directed., material and labour for manufacturing, installation testing and commissioning of factory made and tested, cpri approved amf panel for 250 kva dg set, indoor type, weather, vermin proof, free standing floor mounting type mounted of floor/over the duct, with required mounting channel, cable alley for all the feeders, suitable for 440 volts, 3 phase 4 wire 50hz ac supply system, conforming to is 5039, ip54 class protection and made of 3mm crca mild steel sheet with 50x 50x6mm angle iron frame, hinged doors, front & rear opeing and locking arrangement with necessary bus bar arrangment with insulated al. bus bar 1000 amps rating for phase & neutral, 4 strips, installed on epoxy insulators housed in separated bus chambers covered with heat shrinkable sleeves with necessary bus bar tapings for mccb with suitable capacity of al. bus bar strips including heat shrinkable sleeves, and providing extended bus bars with chember arrangement for outgoing cables, copper control wiring of required size for instruments including necessary pcc in 1 2 4 type b1 using 20mm graded stone aggregate for platform of suitable size , prewired with copper cable of suitable size all as standard practice of manufacturer specifications with the following acessories incomer1 & 2 (main & dg) (a) busbars 1000a tpn 415volts 3phase 4 wire color coaded aluminium busbars 1 lot (b) mccb 630a fp edo 50ka microprocessor based ( o/c, s/c & e/f) release with motor, closing & shunt, aux. contact 4noplus4nc 2 nos. (c) amf relay (econ) 1 nos. (i) digital ammeter 1 nos. (ii) digital voltmeter 1 nos. (iii) ct 1000/5a cl1 10va 1 nos (iv) phase indication light red 230v ac 1 nos. (v) phase indication light yellow 230v ac 1 nos. (vi) phase indication light blue 230v ac 1 nos. (vii) indication lamp 22mm dia color red 240v ac (on) 2 nos. (viii) indication lamp 22mm dia color green 240v ac (off) 2 nos. (ix) indication lamp 22mm dia color amber 240v ac (trip) 2 nos. etc., m&l for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed., m&l for hardcore using broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, all as specified and as directed., m&l for cement concrete in foundations, filling and mass concrete type d2 1 4 8 (using 40mm grade aggregate), m&l for pcc 1 2 4 type b1 (using 20mm grade aggregate) as in coping for pole inclduing form work and finishing the surfaces even and smooth etc complete all as specified and directed., m&l for excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed., s & f for steel work in tubular trusses, cloumn, purlin including special shaped washer, nut, bolt etc. complete using erw or induction butt welded tubes conforming to i.s.1161 1979 grade st.240 complete all as specified., s&f prepainted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, m & l for preparation of steel surfaces of any description over 10 cm in width or girth not otherwise described and two coat of synthetic enamel paint over one coat of red oxide complete all as specified, m&l for machine pressed precast concrete interlocking paver block any shape and size confirming to is 156582006 of 60 mm thickness, m35 grade with grey cement and pigment all as specified and directed., providing and laying at or near ground level factory made kerb stone of m25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1 3 (1 cement 3 coarse sand), including marking joints with or without grooves (thickness of joints except at sharp curve shall not more that 5mm), including making drainage opening wherever required complete as specified and as directed., m&l for preparation of concrete kerb stone or plaster surface of any description not otherwise described over 10cm width or girth and applying two coat of water based floor coat paint emulsion over one coat of self priming coat emulsion by diluting with 30% to 40% water complete all as specified and directed by engrincharge., s&f 4pole, 630 amp changeover switch with enclosure, suitable for 415 v ac, 3phase, 4wire, 50 hz system, for changeover between main supply and dg set. the switch shall be heavyduty, onload type conforming to is/iec 609473, with silver alloy contacts and adequate breaking capacity. the unit shall be mounted on a sturdy angle iron frame fixed over pcc block with necessary nuts, bolts and support structure. terminals shall be suitable for cable/busbar connection and provision for safe manual operation (or motorised operation, if required) shall be included complete with all accessories, mounting hardware all as specified and directed.
Agency / Dept :
indian army
Due Date :
Jul 17, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16763458
Location : lakhanpur , odisha
Source : GEM Tenders
tender for tripping coil 110 v dc_part no.nvcbp00103a , closing coil 110v dc_part no.nvcbp00104a , vaccum interruptor 1250 a_part no.nvcbp00105a , flexible connector for 1250 a_part no.nvcbp00106a , auxillary switch for 11kv vcb_part no.nvcbp00111a , dmc moulded support insulator 6.6kv_part no.nvcbp00127c , limit switch 1 no plus 1 nc_part no.nvcbp00124 , limit switch 2 no plus 2 nc_part no.nvcbp00125 , elr 0.5a to 5a knob type _2no_110v__part no.nvcbp00129a , idmtl relay 2-obyc and 1 ebyf with instantan_part no.nvcbp00130 , ammeter 96 sq.mm _ct operated__part no.nvcbp00131 , voltmeter 96 sq.mm 0-5kv ptr 3.3kvby110v_part no.nvcbp00132 , selector switch for voltmeter_part no.nvcbp00134 , selector switch for localbyremote_part no.nvcbp00134a , push botton_part no.nvcbp00135 , push buttom element _nobync__part no.nvcbp00136 , terminal block _40 terminal__part no.nvcbp00137a , jones plug 24 pin_part no.nvcbp00155a , tnc switch 2 pole -25 a_part no.nvcbp00183 , master trip relay 110v dc_part no.nvcbp00182 , epoxy resin moulded 3ph pt 6.6kvby110v_part no.nvcbp00143a , p.t fuse-6.6 kv_part no.nvcbp00144a , diode based rectifier complete_part no.nvcbp00150 , auxiliary contactor 3noplus1nc 110v_part no.nvcbp00154 , pilot relay 110v dc_part no.nvcbp00189 , pilot relay 110v ac_part no.nvcbp00190 , spring charge motor 230v_part no.nvcbp00191 , vcb_11kv_1250a_26.3ka_dbyo_motor 230vac_part no.nvcbp00101e , vcb_11kv_880a_26.3ka_dbyo_ motor 230vac_part no.nvcbp00101f , epoxy mldd ct_6.6kv_dbl ratio 1250by5plus5a_part no.nvcbp00148e , epoxy mldd ct_6.6kv_2core 400by200by5plus5a_part no.nvcbp00148f , cbct rect 6.6kv_ibyc_id- 100x300__part no.nvcbp00145e , main cu busbar 1250amp _63x12.5_-3nos_part no.nvcbp00162a , cu busbar 1250a_63x12.5__ct to obyg-3nos_part no.nvcbp00162b , cu busbar 1250a_63x12.5__main to ibyc-3no_part no.nvcbp00162c , cu busbar 1250a_63x12.5__obyg to ct-3nos_part no.nvcbp00162d , cu busbar 800a_50x10__ct to obyg-3nos__part no.nvcbp00162e , cu busbar 800a_50x10__main to ibyc-3nos__part no.nvcbp00162f , cu busbar 800a_50x10__obyg to ct-3nos__part no.nvcbp00162g , drive and catch mechanism complete_part no.nvcbp00102d , epoxy moulded busbar spout 1250a_part no.nvcbp00112a , epoxy moulded busbar spout 800a_part no.nvcbp00112b , epoxy moulded circuit spout 1250a_part no.nvcbp00113a , epoxy moulded circuit spout 800a_part no.nvcbp00113b , indication lamp holder with lamp 110v_part no.nvcbp00140 , hrc fuse link_part no.nvcbp00139 , hrc fuse base for control_part no.nvcbp00138 , toggle switch onby off_part no.nvcbp00181 , multi function meter _4410__part no.nvcbp00184 , brass gland complete with stud and nut_part no.nvcbp00142 , neck conn. for vaccum interrupter_part no.ncvbp00108a, spares for vcb panel make prabhu industrial udyog, tripping coil 110 v dc_part no.nvcbp00103a, closing coil 110v dc_part no.nvcbp00104a, vaccum interruptor 1250 a_part no.nvcbp00105a, flexible connector for 1250 a_part no.nvcbp00106a, auxillary switch for 11kv vcb_part no.nvcbp00111a, dmc moulded support insulator 6.6kv_part no.nvcbp00127c, limit switch 1 no plus 1 nc_part no.nvcbp00124, limit switch 2 no plus 2 nc_part no.nvcbp00125, elr 0.5a to 5a knob type _2no_110v__part no.nvcbp00129a, idmtl relay 2-obyc and 1 ebyf with instantan_part no.nvcbp00130, ammeter 96 sq.mm _ct operated__part no.nvcbp00131, voltmeter 96 sq.mm 0-5kv ptr 3.3kvby110v_part no.nvcbp00132, selector switch for voltmeter_part no.nvcbp00134, selector switch for localbyremote_part no.nvcbp00134a, push botton_part no.nvcbp00135, push buttom element _nobync__part no.nvcbp00136, terminal block _40 terminal__part no.nvcbp00137a, jones plug 24 pin_part no.nvcbp00155a, tnc switch 2 pole -25 a_part no.nvcbp00183, master trip relay 110v dc_part no.nvcbp00182, epoxy resin moulded 3ph pt 6.6kvby110v_part no.nvcbp00143a, p.t fuse-6.6 kv_part no.nvcbp00144a, diode based rectifier complete_part no.nvcbp00150, auxiliary contactor 3noplus1nc 110v_part no.nvcbp00154, pilot relay 110v dc_part no.nvcbp00189, pilot relay 110v ac_part no.nvcbp00190, spring charge motor 230v_part no.nvcbp00191, vcb_11kv_1250a_26.3ka_dbyo_motor 230vac_part no.nvcbp00101e, vcb_11kv_880a_26.3ka_dbyo_ motor 230vac_part no.nvcbp00101f, epoxy mldd ct_6.6kv_dbl ratio 1250by5plus5a_part no.nvcbp00148e, epoxy mldd ct_6.6kv_2core 400by200by5plus5a_part no.nvcbp00148f, cbct rect 6.6kv_ibyc_id-100x300__part no.nvcbp00145e, main cu busbar 1250amp _63x12.5_-3nos_part no.nvcbp00162a, cu busbar 1250a_63x12.5__ct to obyg-3nos_part no.nvcbp00162b, cu busbar 1250a_63x12.5__main to ibyc-3no_part no.nvcbp00162c, cu busbar 1250a_63x12.5__obyg to ct-3nos_part no.nvcbp00162d, cu busbar 800a_50x10__ct to obyg-3nos__part no.nvcbp00162e, cu busbar 800a_50x10__main to ibyc-3nos__part no.nvcbp00162f, cu busbar 800a_50x10__obyg to ct-3nos__part no.nvcbp00162g, drive and catch mechanism complete_part no.nvcbp00102d, epoxy moulded busbar spout 1250a_part no.nvcbp00112a, epoxy moulded busbar spout 800a_part no.nvcbp00112b, epoxy moulded circuit spout 1250a_part no.nvcbp00113a, epoxy moulded circuit spout 800a_part no.nvcbp00113b, indication lamp holder with lamp 110v_part no.nvcbp00140, hrc fuse link_part no.nvcbp00139, hrc fuse base for control_part no.nvcbp00138, toggle switch onby off_part no.nvcbp00181, multi function meter _4410__part no.nvcbp00184, brass gland complete with stud and nut_part no.nvcbp00142, neck conn. for vaccum interrupter_part no.ncvbp00108a
Agency / Dept :
mahanadi coalfields limited MCL
Due Date :
Aug 24, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Busbar Support Insulators. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Busbar Support Insulators sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Busbar Support Insulators Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Busbar Support Insulators, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Busbar Support Insulators Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Busbar Support Insulators Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Busbar Support Insulators.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Busbar Support Insulators depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Busbar Support Insulators Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Busbar Support Insulators bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Busbar Support Insulators. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Busbar Support Insulators, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Busbar Support Insulators, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Busbar Support Insulators?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Busbar Support Insulators tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Busbar Support Insulators?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Busbar Support Insulators, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Busbar Support Insulators is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All