sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

11Latest Busbar support insulator Tenders List

Latest Busbar support insulator Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Busbar support insulator tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Busbar support insulator tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Busbar support insulator Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Busbar support insulator tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Busbar support insulator Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Busbar support insulator Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Busbar support insulator Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Busbar support insulator tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Busbar support insulator Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Busbar support insulator sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Busbar support insulator tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Busbar support insulator tenders.

Is EMD mandatory for all Busbar support insulator tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Busbar support insulator work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Busbar support insulator tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Busbar support insulator Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16452886
Location : bangalore , karnataka
LIVE TENDER
tender for supply of bushing and busbar support insulator
Agency / Dept :
mysore electrical industries limited MEIL
Due Date :
Aug 01, 2026 (1 day left)
Tender Value :
0
View Documents
T18 Ref No : 16445685
Location : betul , madhya pradesh
Source : GEM Tenders
LIVE TENDER
tender for part no olr3 3pole oil dashpot relay , part no bbbr400 busbar bbbr400 , part no t33 ht bushing , part no kie33 isolator 400a , part no botp6 mcb , part no raptor capacitor trip device , part no boplaco2 control relay , part no vmso65 voltmeter , part no bokcsrpip6ma60 ammeter selector switch , part no bokudf4 control fuse , part no boes2 contact element , part no elm7la earth leakage relay 50 750 ma 750ma with , part no bovrn15a epoxy resin cast type current transforme , part no 122txy thermal overload relay xa ya , part no htptl1 potential transformer 3 3 kv , part no boes3 contact element , part no fx220 potential transformer , part no mcra022a7 aux contactor , part no lab9 indicating lamp with pcb mounting , part no bs45 insulator support for ht pt fuse , part no ciptf clamp for ht pt fuse , part no bobp3 bullet pin up to 3 3k 300a , part no bota2dt2 off delay timer , part no 501000 vcb closing coil , part no bolso5 vcb limit switch , part no oba brass terminal with nylon bushing , part no cbt150m core balance transformer , part no bo4005ctr current transformer , part no bossr overload short circuit and motor protect , part no bokcsrp135vs voltmeter selector switch , part no boner neutral earthing resistor , part no t8 brass terminal with dmc bushing , part no pru3 pilot relay , part no bokycsrp125b test run selector switch , part no boabwna hrc ht pt fuse , part no bogf glass fuse with holder , part no boarc vcb aux rotary switch , part no nrmr neutral resistor monitring relay 100v ac , part no ss33 surge suppressor , part no htta33 h t bushing with stud 3 3 kv , part no bossabwna ht hrc pt fuse 1a , part no am ammeter , part no bev006133 vaccum contactor 3 3 kv 200 amp with , part no boca2dn1229 aux contactor with coil , part no olr3 overload relay magnetic , part no hrc100 ht power fuse 3 3kv grade upto 100a , part no elm7lats earth leakage relay 50 750 ma with time , part no cbt80m core balance transformer , part no 120100515 current transformer , part no htptl1 pt 1p 3 3kv 110v 500va , part no boes2 no nc actuator for flp , part no glfu glass fuse , part no oba terminal bushing , part no kire 3 3kv isolator on off earth reverse 400a , part no 12060515 current transformer 60 5 15va , part no bev0053 vacuum interrupter , part no 000110a cover bolts , part no 050000 isolator assly k3 on offf , part no 50100 fixed contact assy 05 01 00 mine line , part no 050200 moving contact assembly for isolator , part no 50502 micro switch , part no 110100b overload assembly breaker 110a 200a , part no 110100c overload assembly breaker 210a 300 a , part no dp300 ct operated overload , part no 110200 moving contact assembly for breaker , part no 110300 shunt trip assy 11 03 00 9 mine line , part no 110400a no volt coil assy under voltage coil as , part no 110402 no volt coilunder voltage coil , part no 110531 catcher assy 11 05 31 , part no 110600 fixed contact assembly for breaker , part no 12020055 current transformer for ammeter , part no bbr400 busbar , part no boes2 push button actuator for el test , part no boes3 reset push button contact element , part no ds potential transformer , part no lat4005 current transformer for ol , part no pbs push button with spindle , part no 5kvamllt4 terminal bushing with dmc insulator t5 , part no wr2 circuit breaker for 200a with complete a , part no wr2a complete control wiring including pla r , part no 110301 shunt trip coils , part no fcs flexible copper braids with lugs , part no gebconrl control plate chasis assy suitable for , part no 000110a cover fixing bolt , part no 120029 current transformer 15va , part no k4r on off rev isolator , part no 120022 push button actuator , part no tic copper stud with dmc insulator , part no ts2c test switch , part no 120021 thermal overload relay , part no bbr300 busbar , part no lab9geb indicating lamp with pcb mounting , part no boca2dn1229 aux contactor 220v ac , part no boes1 push element 1no plus 1nc , part no ds potential transformer type d , part no lat10015 ct for over load , part no bohrc160 hrc fuse , part no spp5cmsp single phasing preventor with module , part no 120310 magnetic overload relay , part no 139geb resistance , part no ts toggle switch , part no elm7la earth leakage relay 50750m a latchout ty , part no gfh glass fuse with holder , part no 010000 plug and socket tpye rstrnd , part no t5 terminal bushing assy with brass termin , part no k4 on off isolator 300a , part no b potential transformer , part no elm7lats earth leakage relay 50 750ma with time l , part no lat3005 current transformer for ol , part, 3pole oil dashpot relay, busbar bbbr400, ht bushing, isolator 400a, mcb, capacitor trip device, control relay, voltmeter, ammeter selector switch, control fuse, contact element, earth leakage relay 50 750 ma 750ma with, epoxy resin cast type current transforme, thermal overload relay xa ya, potential transformer 3 3 kv, potential transformer, aux contactor, indicating lamp with pcb mounting, insulator support for ht pt fuse, clamp for ht pt fuse, bullet pin up to 3 3k 300a, off delay timer, vcb closing coil, vcb limit switch, brass terminal with nylon bushing, core balance transformer, current transformer, overload short circuit and motor protect, voltmeter selector switch, neutral earthing resistor, brass terminal with dmc bushing, pilot relay, test run selector switch, hrc ht pt fuse, glass fuse with holder, vcb aux rotary switch, neutral resistor monitring relay 100v ac, surge suppressor, h t bushing with stud 3 3 kv, ht hrc pt fuse 1a, ammeter, vaccum contactor 3 3 kv 200 amp with, aux contactor with coil, overload relay magnetic, ht power fuse 3 3kv grade upto 100a, earth leakage relay 50 750 ma with time, pt 1p 3 3kv 110v 500va, no nc actuator for flp, glass fuse, terminal bushing, 3 3kv isolator on off earth reverse 400a, current transformer 60 5 15va, vacuum interrupter, cover bolts, isolator assly k3 on offf, fixed contact assy 05 01 00 mine line, moving contact assembly for isolator, micro switch, overload assembly breaker 110a 200a, overload assembly breaker 210a 300 a, ct operated overload, moving contact assembly for breaker, shunt trip assy 11 03 00 9 mine line, no volt coil assy under voltage coil as, no volt coilunder voltage coil, catcher assy 11 05 31, fixed contact assembly for breaker, current transformer for ammeter, busbar, push button actuator for el test, reset push button contact element, current transformer for ol, push button with spindle, terminal bushing with dmc insulator t5, circuit breaker for 200a with complete a, complete control wiring including pla r, shunt trip coils, flexible copper braids with lugs, control plate chasis assy suitable for, cover fixing bolt, current transformer 15va, on off rev isolator, push button actuator, copper stud with dmc insulator, test switch, thermal overload relay, aux contactor 220v ac, push element 1no plus 1nc, potential transformer type d, ct for over load, hrc fuse, single phasing preventor with module, magnetic overload relay, resistance, toggle switch, earth leakage relay 50750m a latchout ty, plug and socket tpye rstrnd, terminal bushing assy with brass termin, on off isolator 300a, earth leakage relay 50 750ma with time l
Agency / Dept :
western coalfields limited WCL
Due Date :
Aug 03, 2026 (3 days left)
Tender Value :
5340343
View Documents
T18 Ref No : 16063854
Location : bellary , karnataka
tender for supply of bushing and busbar support insulator
Agency / Dept :
mysore electrical industries limited MEIL
Due Date :
Jul 09, 2026
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16240008
Location : chiplun , maharashtra
Source : GEM Tenders
tender for mat code -8395200001 , mat code -8337040001 , mat code -8337040002 , mat code -8176200001 , mat code - 8337040003 , mat code -9493260001 , mat code - 8337130001 , mat code -1022021035, hiring of oem service for siemens make panel, 8bk80 panel kit, bushing busbar / cable compartment, guide plate for fixed contact, busbar support insulator, fixed contact -lower (l1 to l3) ct/cable compartment, thermostat, space heater, hiring of siemens team for servicing & maintenance
Agency / Dept :
konkan lng limited
Due Date :
Jul 24, 2026
Tender Value :
0
View Documents
T18 Ref No : 16472196
Location : bhubaneswar , odisha
tender for dough moulding compound busbar support insulator., dough moulding compound busbar support insulator as per below dimension. length base = 110mm width= 50-53mm height= 65mm top length = 40mm top width =52-53mm mounting pitch = 70- 85mm - warranty period: 30 months after the date of delivery
Agency / Dept :
east coast railway ECOR
Due Date :
Jul 30, 2026
Tender Value :
0
View Documents
T18 Ref No : 16194380
Location : jammu , jammu & kashmir
Source : GEM Tenders
corrigendum tender for removing the existing compact sub stn , taking out and transporting defective css , servicing of rmu 11kv model of c and s make , supply and fixing in replacement of vaccum , supply and fixing of digital amp meter , supply and fixing of digital volt meter , supply and fixing in replacement indicator lamp , supply and fixing in replacement 11kv , opening up the top cover of the transformer , supply and fixing in replacement ht coils , supply and replacement of lt coils , supply and fixing in replacement of gasket , supply and fixing in replacement of lt porcelain , supply and fixing in replacement of ht 11 kv , supply and fixing new transformer oil , filtration dehydration of transformer oil , supply and fixing in replacement of supply testing , exacavation for cables loops near the poles , material and labour for repairing existing lt panel , material and labour for preparing old painted , servicing of acb model 2013 , supply and fixing of shunt coil assemply , supply and fixing of spring charging motor , supply and fixing in replacement of mccb 250 amps , supply and fixing in replacement of mccb 160 amps , cable jointing kit for 11 kv, repair and servicing of compact sub stn transformer rmu and lt panel accessories, removing the existing compact sub stn from plateform after disconnection both ht lt network and re-connecting after repairing connecting ht lt connection complete all as specified directed., taking out and transporting defective css of cap 500 kva rested on platform for repairs after disconnecting from both ht lt network and shifting to workshop from af stn sub stn, servicing of rmu 11kv model of c and s make alongwith tripping system including taking out and carried out the fwg repair. a cleaning and greasing of mechanism- 01 job b tightning testing of mechanism parts- 01 job. c alignment testing and adjustment of mechanism- 01 job. d cleaning of panel insulater - 01 job. e cleaning and tightning of control wiring unit- 01 job. f allingment of trolley checking greasing of shutter lock, supply and fixing in replacement of vaccum interrupters bottle 12 kv high quality and as per existing model, supply and fixing of digital amp meter rating of 400 amps, supply and fixing of digital volt meter rating of 500 volt, supply and fixing in replacement indicator lamp of any colour r y b with neon lamp for showing the different phases of the stabilizer complete with wiring, supply and fixing in replacement 11kv support insulator high quality suitable for 11kv rmu including busbar insulation material and nut bolts, opening up the top cover of the transformer by taking out the transformer oil in a separate container after disconnecting taking out the ht lt side electric connections from both the primary and secondary side of the transformer of any type, supply and fixing in replacement ht coils made out of super enameled double paper coated dpc ht copper winding wire of transformers capacity 500 kva coils to be repalced as per existing number of turns gauge insulation value matching with manufactures design complete all as specified., supply and replacement of lt coils made out of super enameled lt copper strip of trasformer capacity 500 kva note coil to be replaced shallhave same number of turns gauge insulation value matching with manufactures design complete all as specified., supply and fixing in replacement of gasket set 6 mm thick superior quality on top cover plate of the transformer of any capacity 500 kva all as spd and directed by engr-in-charge., supply and fixing in replacement of lt porcelain bushing with brass stud screwed with brass nuts bolts and cork washer for transformer of capacity 500 kva 415 volts 3 phase 4 wire system all as spd and directed by engr-in-charge., supply and fixing in replacement of ht 11 kv porcelain bushing with brass stud screwed with brass nuts bolts and cork washer for transformer of capacity 500 kva all as spd and directed by engr-in-charge., supply and fixing new transformer oil dielectric strength not less than 45 kv for making up the level for replacing the used unsv oil including dehydration before filling complete all as specified and directed by engr-in-charge., filtration dehydration of transformer oil as drained out from transformer to make the oil fit for re use by improving its dielectric strength to not less than 40 kv . oil below 35 kv shall be replaced with new oil new oil for taping or for replacement shall be measured and paid separately under relevant item complete all as specified and directed by engineer-in-charge., supply and fixing in replacement of supply testing and laying xlpe insulated screened pvc bedded galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor 11000 volts earthed grade of size 95 sqmm 3 core complete all as per engr-in-charge., exacavation for cables loops near the poles lt panels transformers cutting the damages burnt parts of cable and reconnecting its positions complete with thimbles nut bolts sleeves all as specified and directed by engineer-in-charge., material and labour for repairing existing lt panel doors of front back and internal sheets complete with new locking arrangement complete all as specified and directed., material and labour for preparing old painted surface of panel board by cleaning removing of old paint by scratching with wire brush sand paper etc and including denting of broken rusted surface and applied two coat of synthetic surface enamel paint by spray painting outside surface of panel as existing colour of panel all as specified and directed., servicing of acb model 2013 of c and s make alongwith tripping system including taking out and carried out the fwg repair. a cleaning and greasing of mechanisam. b checking of ir value with insulation tester between phases to earth and between the phases with breaker open and close position. c operating system of spring charge d checking of tripping system. e checking of ir value. f tightening of connections of control cables. g servicing of draw out mechanism, supply and fixing of shunt coil assemply as per the existing model and cap complete all as specified and directed., supply and fixing of spring charging motor assemply as per the existing model and cap complete all as specified and directed., supply and fixing in replacement of mccb 250 amps 4 pole 35 ka with sheet metal encloser with adjustable thermal and fixed magnetic setting complete all as specified and directed., supply and fixing in replacement of mccb 160 amps 4 pole 36 ka with sheet metal encloser with adjustable thermal and fixed magnetic setting complete all as specified and directed., cable jointing kit for 11 kv earthed grade cable for out door end termination cold shrink type joint complete with jointing material and accessories suitable for 3 core xlpe armoured al conductor cable of size 95 to 120 sq mm and entire satisfaction of engnr-in-charge
Agency / Dept :
indian army
Due Date :
Jul 11, 2026
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16121822
Location : bardhaman , west bengal
Source : GEM Tenders
tender for supply laying testing and connecting xlpe sheathed pvc insulated screened pvc size 3.5 core 240 sqmm complete all as specified and as directed. , supply installation testing and commissioning of silent type diesel engine driven generating set with governing class g2 including sound reducing canopy sound level not more than 75db , m and l earthing complete with gi steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground earth pit not less than 2.25mtr , excavating in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth getting out in soft loose soil complete all as specified and as directed. , returning filling in including spreading levelling watering and well ramming in layers not exc. 250mm in soft loose soil complete all as specified and as directed. , removing excavated materials soils not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point in soil complete all as specified and as directed. , m and l sand cushioning dry in trenches for protection of ug cables below above and around the ug cable laid in trenches of 230mm , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable complete all as specified and as directed. , s and f galvanised iron pipe 80mm bore dia light grade for protection of ug cable laid in floors road crossing , s and f hdpe dwc double walled corrugated of diameter 90 mm including disconnection and connection of cable , material and labour for manufacturing installation testing and commissioning of factory made and tested cpri approved amf , m and l for surface excavation n.exc not exceeding 30 cm deep and averaging 15cm deep , m and l for hardcore using broken stone or boulders of gauge n exc. 63 mm deposited spread and levelled in layers n exc. 15 cm thick , m and l for cement concrete in foundations filling and mass concrete type d2 1 4 8 , m and l for pcc 1 2 4 type b1 using 20mm grade aggregate as in coping for pole inclduing form work , m and l for excavating in post holes or similar holes each n exc 0.5 cu. m getting out returning filling in and ramming earth , s and f for steel work in tubular trusses cloumn purlin including special shaped washer nut bolt etc. , s and f prepainted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick , m and l for preparation of steel surfaces of any description over 10 cm , m and l for machine pressed precast concrete interlocking paver block any shape and size confirming to is 156582006 , providing and laying at or near ground level factory made kerb stone of m25 grade , m and l for preparation of concrete kerb stone or plaster surface of any description not otherwise described over 10cm , s and f 4pole 630 amp changeover switch with enclosure suitable for 415 v ac 3phase 4 wire , wrecking crow bar or claw bar as per is 706 (q3), supply, laying, testing and connecting xlpe sheathed,pvc insulated screened pvc bedded,galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volt grade of size 3.5 core 240 sqmm complete all as specified and as directed., supply, installation testing and commissioning of silent type diesel engine driven generating set with governing class g2 including sound reducing canopy (sound level not more than 75db at a distance of 1 mtr) 14 guage as per guidelines issued by central pollution control board (cpcb ivplus, 4plus), 415 volts, 3 phase, 50 hz supply complete, control panel suitable for giving an output of 250 kva and alternator of suitable capacity and rpm coupled with each other with flexible coupling mounted on anti vibration pads on foundation as recommended by manufacturer. the dg set shall comprise of self starter with batteries, turbocharger, water cooler and comprising all standard fittings, fixtures & all piping etc. as below (a) alternator directly coupled with engine and suitable to produce 415 volts, 3 phase, 4 wire system, 50 hz, 0.8 pf 1500 rpm of capacity 250 kva all as per is 13364 and upto date amendments with h class insulation, self excited, self regulated, screen protected drip proof type with two end shield ball / roller bearing with damper winding in each pole, complete all as specified and directed. (b) engine water cooled diesel engine (cpcb norms iv compliance) developing 105 bhp having self start engine (including batteries with provision of charging the batteries and leads) suitable to drive above specified alternator complete with foundation (foundation design as per oem) as per is 10001/10002, coupled directly through flexible coupling, multi cylinder four stroke, cold starting, 1500 rpm industrial type as per bs 649 or is 1601 with ai electronic governor suitable to regulate speed of dg set from no load to full load complete with fuel tank of capacity as per manufacturer s recommendation, fuel lines, exhaust pipe duly insulated with asbestos rope and with support and silencer muffiers etc. for continuous operation and standard accessories, sump pre heaters, cold start kit etc., m&l earthing complete with gi steel earth plate electrode of size 600mm x 600mm x 6mm thick, burried directly in ground, earth pit not less than 2.25mtr deep below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to the galvanised iron strip of size 25x4mm by means of bolts, nuts, check nuts and washers of galvanised steel and earth lead protected by provision of 40mm bore gi pipe medium grade and including provision of concrete pit in pcc 1 2 4 type b 1 (using 20mm grade crushed stone aggregate) with 40mm thcik rcc (type b 1) cover reinforced with 8mm dia tmt bar both ways with 12mm dia round bar handle and frame of angle iron 25x25x3mm with lugs 02 nos and 20mm bore gi light grade watering pipe with funnel and wiremesh and filling common salt and charcol and test point with fixing arrangements and including necessary excavation in any type of soil, returning filling in and removing excavated soil to a distance of 50mtr from the site, complete all as shown on electrical plate no 3 of mes ssr part i and directed., excavating in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth, getting out in soft / loose soil, complete all as specified and as directed., returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm in soft/loose soil, complete all as specified and as directed., removing excavated materials (soils) not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point in soil, complete all as specified and as directed., m&l sand cushioning (dry) in trenches for protection of ug cables (below, above and around the ug cable laid in trenches) of 230mm spread thickness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. (note for the purpose of payment, punned thickness of sand cushioning only shall be measured and paid)., m&l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable, complete all as specified and as directed., s&f galvanised iron pipe 80mm bore (dia) light grade for protection of ug cable, laid in floors/ road crossing, fixing to pole with mild steel clamps, nuts, bolts, etc., complete all as specified and as directed., s & f hdpe dwc (double walled corrugated) of diameter 90 mm including disconnection and connection of cable near panel/oh for pipe fixing including joints complete all as directed., material and labour for manufacturing, installation testing and commissioning of factory made and tested, cpri approved amf panel for 250 kva dg set, indoor type, weather, vermin proof, free standing floor mounting type mounted of floor/over the duct, with required mounting channel, cable alley for all the feeders, suitable for 440 volts, 3 phase 4 wire 50hz ac supply system, conforming to is 5039, ip54 class protection and made of 3mm crca mild steel sheet with 50x 50x6mm angle iron frame, hinged doors, front & rear opeing and locking arrangement with necessary bus bar arrangment with insulated al. bus bar 1000 amps rating for phase & neutral, 4 strips, installed on epoxy insulators housed in separated bus chambers covered with heat shrinkable sleeves with necessary bus bar tapings for mccb with suitable capacity of al. bus bar strips including heat shrinkable sleeves, and providing extended bus bars with chember arrangement for outgoing cables, copper control wiring of required size for instruments including necessary pcc in 1 2 4 type b1 using 20mm graded stone aggregate for platform of suitable size , prewired with copper cable of suitable size all as standard practice of manufacturer specifications with the following acessories incomer1 & 2 (main & dg) (a) busbars 1000a tpn 415volts 3phase 4 wire color coaded aluminium busbars 1 lot (b) mccb 630a fp edo 50ka microprocessor based ( o/c, s/c & e/f) release with motor, closing & shunt, aux. contact 4noplus4nc 2 nos. (c) amf relay (econ) 1 nos. (i) digital ammeter 1 nos. (ii) digital voltmeter 1 nos. (iii) ct 1000/5a cl1 10va 1 nos (iv) phase indication light red 230v ac 1 nos. (v) phase indication light yellow 230v ac 1 nos. (vi) phase indication light blue 230v ac 1 nos. (vii) indication lamp 22mm dia color red 240v ac (on) 2 nos. (viii) indication lamp 22mm dia color green 240v ac (off) 2 nos. (ix) indication lamp 22mm dia color amber 240v ac (trip) 2 nos. etc., m&l for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed., m&l for hardcore using broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, all as specified and as directed., m&l for cement concrete in foundations, filling and mass concrete type d2 1 4 8 (using 40mm grade aggregate), m&l for pcc 1 2 4 type b1 (using 20mm grade aggregate) as in coping for pole inclduing form work and finishing the surfaces even and smooth etc complete all as specified and directed., m&l for excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed., s & f for steel work in tubular trusses, cloumn, purlin including special shaped washer, nut, bolt etc. complete using erw or induction butt welded tubes conforming to i.s.1161 1979 grade st.240 complete all as specified., s&f prepainted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, m & l for preparation of steel surfaces of any description over 10 cm in width or girth not otherwise described and two coat of synthetic enamel paint over one coat of red oxide complete all as specified, m&l for machine pressed precast concrete interlocking paver block any shape and size confirming to is 156582006 of 60 mm thickness, m35 grade with grey cement and pigment all as specified and directed., providing and laying at or near ground level factory made kerb stone of m25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1 3 (1 cement 3 coarse sand), including marking joints with or without grooves (thickness of joints except at sharp curve shall not more that 5mm), including making drainage opening wherever required complete as specified and as directed., m&l for preparation of concrete kerb stone or plaster surface of any description not otherwise described over 10cm width or girth and applying two coat of water based floor coat paint emulsion over one coat of self priming coat emulsion by diluting with 30% to 40% water complete all as specified and directed by engrincharge., s&f 4pole, 630 amp changeover switch with enclosure, suitable for 415 v ac, 3phase, 4wire, 50 hz system, for changeover between main supply and dg set. the switch shall be heavyduty, onload type conforming to is/iec 609473, with silver alloy contacts and adequate breaking capacity. the unit shall be mounted on a sturdy angle iron frame fixed over pcc block with necessary nuts, bolts and support structure. terminals shall be suitable for cable/busbar connection and provision for safe manual operation (or motorised operation, if required) shall be included complete with all accessories, mounting hardware all as specified and directed.
Agency / Dept :
indian army
Due Date :
Jul 17, 2026
Tender Value :
0
View Documents
T18 Ref No : 16010599
Location : jammu , jammu & kashmir
Source : GEM Tenders
tender for removing the existing compact sub stn , taking out and transporting defective css , servicing of rmu 11kv model of c and s make , supply and fixing in replacement of vaccum , supply and fixing of digital amp meter , supply and fixing of digital volt meter , supply and fixing in replacement indicator lamp , supply and fixing in replacement 11kv , opening up the top cover of the transformer , supply and fixing in replacement ht coils , supply and replacement of lt coils , supply and fixing in replacement of gasket , supply and fixing in replacement of lt porcelain , supply and fixing in replacement of ht 11 kv , supply and fixing new transformer oil , filtration dehydration of transformer oil , supply and fixing in replacement of supply testing , exacavation for cables loops near the poles , material and labour for repairing existing lt panel , material and labour for preparing old painted , servicing of acb model 2013 , supply and fixing of shunt coil assemply , supply and fixing of spring charging motor , supply and fixing in replacement of mccb 250 amps , supply and fixing in replacement of mccb 160 amps , cable jointing kit for 11 kv, repair and servicing of compact sub stn transformer rmu and lt panel accessories, removing the existing compact sub stn from plateform after disconnection both ht lt network and re-connecting after repairing connecting ht lt connection complete all as specified directed., taking out and transporting defective css of cap 500 kva rested on platform for repairs after disconnecting from both ht lt network and shifting to workshop from af stn sub stn, servicing of rmu 11kv model of c and s make alongwith tripping system including taking out and carried out the fwg repair. a cleaning and greasing of mechanism- 01 job b tightning testing of mechanism parts- 01 job. c alignment testing and adjustment of mechanism- 01 job. d cleaning of panel insulater - 01 job. e cleaning and tightning of control wiring unit- 01 job. f allingment of trolley checking greasing of shutter lock, supply and fixing in replacement of vaccum interrupters bottle 12 kv high quality and as per existing model, supply and fixing of digital amp meter rating of 400 amps, supply and fixing of digital volt meter rating of 500 volt, supply and fixing in replacement indicator lamp of any colour r y b with neon lamp for showing the different phases of the stabilizer complete with wiring, supply and fixing in replacement 11kv support insulator high quality suitable for 11kv rmu including busbar insulation material and nut bolts, opening up the top cover of the transformer by taking out the transformer oil in a separate container after disconnecting taking out the ht lt side electric connections from both the primary and secondary side of the transformer of any type, supply and fixing in replacement ht coils made out of super enameled double paper coated dpc ht copper winding wire of transformers capacity 500 kva coils to be repalced as per existing number of turns gauge insulation value matching with manufactures design complete all as specified., supply and replacement of lt coils made out of super enameled lt copper strip of trasformer capacity 500 kva note coil to be replaced shallhave same number of turns gauge insulation value matching with manufactures design complete all as specified., supply and fixing in replacement of gasket set 6 mm thick superior quality on top cover plate of the transformer of any capacity 500 kva all as spd and directed by engr-in-charge., supply and fixing in replacement of lt porcelain bushing with brass stud screwed with brass nuts bolts and cork washer for transformer of capacity 500 kva 415 volts 3 phase 4 wire system all as spd and directed by engr-in-charge., supply and fixing in replacement of ht 11 kv porcelain bushing with brass stud screwed with brass nuts bolts and cork washer for transformer of capacity 500 kva all as spd and directed by engr-in-charge., supply and fixing new transformer oil dielectric strength not less than 45 kv for making up the level for replacing the used unsv oil including dehydration before filling complete all as specified and directed by engr-in-charge., filtration dehydration of transformer oil as drained out from transformer to make the oil fit for re use by improving its dielectric strength to not less than 40 kv . oil below 35 kv shall be replaced with new oil new oil for taping or for replacement shall be measured and paid separately under relevant item complete all as specified and directed by engineer-in-charge., supply and fixing in replacement of supply testing and laying xlpe insulated screened pvc bedded galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor 11000 volts earthed grade of size 95 sqmm 3 core complete all as per engr-in-charge., exacavation for cables loops near the poles lt panels transformers cutting the damages burnt parts of cable and reconnecting its positions complete with thimbles nut bolts sleeves all as specified and directed by engineer-in-charge., material and labour for repairing existing lt panel doors of front back and internal sheets complete with new locking arrangement complete all as specified and directed., material and labour for preparing old painted surface of panel board by cleaning removing of old paint by scratching with wire brush sand paper etc and including denting of broken rusted surface and applied two coat of synthetic surface enamel paint by spray painting outside surface of panel as existing colour of panel all as specified and directed., servicing of acb model 2013 of c and s make alongwith tripping system including taking out and carried out the fwg repair. a cleaning and greasing of mechanisam. b checking of ir value with insulation tester between phases to earth and between the phases with breaker open and close position. c operating system of spring charge d checking of tripping system. e checking of ir value. f tightening of connections of control cables. g servicing of draw out mechanism, supply and fixing of shunt coil assemply as per the existing model and cap complete all as specified and directed., supply and fixing of spring charging motor assemply as per the existing model and cap complete all as specified and directed., supply and fixing in replacement of mccb 250 amps 4 pole 35 ka with sheet metal encloser with adjustable thermal and fixed magnetic setting complete all as specified and directed., supply and fixing in replacement of mccb 160 amps 4 pole 36 ka with sheet metal encloser with adjustable thermal and fixed magnetic setting complete all as specified and directed., cable jointing kit for 11 kv earthed grade cable for out door end termination cold shrink type joint complete with jointing material and accessories suitable for 3 core xlpe armoured al conductor cable of size 95 to 120 sq mm and entire satisfaction of engnr-in-charge
Agency / Dept :
indian army
Due Date :
Jul 07, 2026
Tender Value :
0
View Documents
T18 Ref No : 16141548
Location : jammu , jammu & kashmir
Source : GEM Tenders
corrigendum tender for removing the existing compact sub stn , taking out and transporting defective css , servicing of rmu 11kv model of c and s make , supply and fixing in replacement of vaccum , supply and fixing of digital amp meter , supply and fixing of digital volt meter , supply and fixing in replacement indicator lamp , supply and fixing in replacement 11kv , opening up the top cover of the transformer , supply and fixing in replacement ht coils , supply and replacement of lt coils , supply and fixing in replacement of gasket , supply and fixing in replacement of lt porcelain , supply and fixing in replacement of ht 11 kv , supply and fixing new transformer oil , filtration dehydration of transformer oil , supply and fixing in replacement of supply testing , exacavation for cables loops near the poles , material and labour for repairing existing lt panel , material and labour for preparing old painted , servicing of acb model 2013 , supply and fixing of shunt coil assemply , supply and fixing of spring charging motor , supply and fixing in replacement of mccb 250 amps , supply and fixing in replacement of mccb 160 amps , cable jointing kit for 11 kv, repair and servicing of compact sub stn transformer rmu and lt panel accessories, removing the existing compact sub stn from plateform after disconnection both ht lt network and re-connecting after repairing connecting ht lt connection complete all as specified directed., taking out and transporting defective css of cap 500 kva rested on platform for repairs after disconnecting from both ht lt network and shifting to workshop from af stn sub stn, servicing of rmu 11kv model of c and s make alongwith tripping system including taking out and carried out the fwg repair. a cleaning and greasing of mechanism- 01 job b tightning testing of mechanism parts- 01 job. c alignment testing and adjustment of mechanism- 01 job. d cleaning of panel insulater - 01 job. e cleaning and tightning of control wiring unit- 01 job. f allingment of trolley checking greasing of shutter lock, supply and fixing in replacement of vaccum interrupters bottle 12 kv high quality and as per existing model, supply and fixing of digital amp meter rating of 400 amps, supply and fixing of digital volt meter rating of 500 volt, supply and fixing in replacement indicator lamp of any colour r y b with neon lamp for showing the different phases of the stabilizer complete with wiring, supply and fixing in replacement 11kv support insulator high quality suitable for 11kv rmu including busbar insulation material and nut bolts, opening up the top cover of the transformer by taking out the transformer oil in a separate container after disconnecting taking out the ht lt side electric connections from both the primary and secondary side of the transformer of any type, supply and fixing in replacement ht coils made out of super enameled double paper coated dpc ht copper winding wire of transformers capacity 500 kva coils to be repalced as per existing number of turns gauge insulation value matching with manufactures design complete all as specified., supply and replacement of lt coils made out of super enameled lt copper strip of trasformer capacity 500 kva note coil to be replaced shallhave same number of turns gauge insulation value matching with manufactures design complete all as specified., supply and fixing in replacement of gasket set 6 mm thick superior quality on top cover plate of the transformer of any capacity 500 kva all as spd and directed by engr-in-charge., supply and fixing in replacement of lt porcelain bushing with brass stud screwed with brass nuts bolts and cork washer for transformer of capacity 500 kva 415 volts 3 phase 4 wire system all as spd and directed by engr-in-charge., supply and fixing in replacement of ht 11 kv porcelain bushing with brass stud screwed with brass nuts bolts and cork washer for transformer of capacity 500 kva all as spd and directed by engr-in-charge., supply and fixing new transformer oil dielectric strength not less than 45 kv for making up the level for replacing the used unsv oil including dehydration before filling complete all as specified and directed by engr-in-charge., filtration dehydration of transformer oil as drained out from transformer to make the oil fit for re use by improving its dielectric strength to not less than 40 kv . oil below 35 kv shall be replaced with new oil new oil for taping or for replacement shall be measured and paid separately under relevant item complete all as specified and directed by engineer-in-charge., supply and fixing in replacement of supply testing and laying xlpe insulated screened pvc bedded galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor 11000 volts earthed grade of size 95 sqmm 3 core complete all as per engr-in-charge., exacavation for cables loops near the poles lt panels transformers cutting the damages burnt parts of cable and reconnecting its positions complete with thimbles nut bolts sleeves all as specified and directed by engineer-in-charge., material and labour for repairing existing lt panel doors of front back and internal sheets complete with new locking arrangement complete all as specified and directed., material and labour for preparing old painted surface of panel board by cleaning removing of old paint by scratching with wire brush sand paper etc and including denting of broken rusted surface and applied two coat of synthetic surface enamel paint by spray painting outside surface of panel as existing colour of panel all as specified and directed., servicing of acb model 2013 of c and s make alongwith tripping system including taking out and carried out the fwg repair. a cleaning and greasing of mechanisam. b checking of ir value with insulation tester between phases to earth and between the phases with breaker open and close position. c operating system of spring charge d checking of tripping system. e checking of ir value. f tightening of connections of control cables. g servicing of draw out mechanism, supply and fixing of shunt coil assemply as per the existing model and cap complete all as specified and directed., supply and fixing of spring charging motor assemply as per the existing model and cap complete all as specified and directed., supply and fixing in replacement of mccb 250 amps 4 pole 35 ka with sheet metal encloser with adjustable thermal and fixed magnetic setting complete all as specified and directed., supply and fixing in replacement of mccb 160 amps 4 pole 36 ka with sheet metal encloser with adjustable thermal and fixed magnetic setting complete all as specified and directed., cable jointing kit for 11 kv earthed grade cable for out door end termination cold shrink type joint complete with jointing material and accessories suitable for 3 core xlpe armoured al conductor cable of size 95 to 120 sq mm and entire satisfaction of engnr-in-charge
Agency / Dept :
indian army
Due Date :
Jul 09, 2026
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15690218
Location : bangalore , karnataka
Source : GEM Tenders
tender for insulator busbar
Agency / Dept :
bharat heavy electricals limited BHEL
Due Date :
Jun 16, 2026
Tender Value :
0
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Busbar Support Insulator. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Busbar Support Insulator sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Busbar Support Insulator Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Busbar Support Insulator, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Busbar Support Insulator Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Busbar Support Insulator Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Busbar Support Insulator.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Busbar Support Insulator depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Busbar Support Insulator Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Busbar Support Insulator bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Busbar Support Insulator. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Busbar Support Insulator, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Busbar Support Insulator, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Busbar Support Insulator?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Busbar Support Insulator tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Busbar Support Insulator?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Busbar Support Insulator, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Busbar Support Insulator is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All