sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

36Latest Bezel Tenders List

Latest Bezel Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Bezel tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Bezel tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Bezel Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Bezel tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Bezel Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Bezel Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Bezel Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Bezel tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Bezel Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Bezel sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Bezel tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Bezel tenders.

Is EMD mandatory for all Bezel tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Bezel work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Bezel tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Bezel Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17353835
Location : aligarh , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for title1 , title2 , title3 , title4 , title5 , title6 , title7 , title8 , title9 , title10 , title11 , title12 , title13 , title14 , title15 , title16 , title17 , title18 , title19 , title20, procurement of pressure gauges and transmitter, pressure gauge 0 to16 kg per cm2 pressure gauge for fire protection service installed at all dvs dial size 4 100mm aluminium connection 1 by 4npt m ss304 bourdon ss316 socket ss316, gauge vaccum range 0 to minus 760mmwc dial size 6 150mm aluminium white background with black marking connection 1by2npt m ss304 bourdon socket ss316, pressure gauge dial size 6 150mm aluminium white background with black marking case and bezel screwed type bezel weatherproof to ipminus 68 as per iec 60529 connection socket 1by2npt, pressure gauge 0 to 4 kgpercm pressure gauge dial size 6 150mm aluminium white background with black marking case andbezel screwed type bezel weatherproof to ip minus 68 as per iec 60529 panel connection fitting 1by2npt max input 7 kg percm2 enclosure ip65 ambient temp 80degc end connection 1 upon 4 inch npt (f), pressure gauge dial size 100mm white background with black marking case and bezel screwed type bezel weatherproof to ip minus 68 bourdon tube type ss316 connection 1 by 4 npt m back entry pneumatic pressure up to 10 bar 6mm into 4mm pneumatic air compressor tubing pu hose tube pipe, pressure gauge dial size 100mm white background with black marking bourdon tube type ss316 connection fitting 1by2 npt, pressure gauge dial size 6 150mm aluminium white background with black marking weatherproof to ip minus 68 as per iec 60529 bourdon tube type ss316 connecti 4 npt m accuracy plusbyminus1percent of full range, pressure gauge dial size 6 150mm aluminium white background with black marking movement ss316 case ss316 connect tting 1by2npt, pressure gauge dial size6 150mm aluminium white background with black marking case andbezel screwed type bezel weather proof to ip minus 68 as per iec 60529 bourdon movement ss316 case ss316 connection fitting 1by2npt, pressure gauge 0 to 25kgpercm2 pressure gauge dial size 6 150mm aluminium white background with black marking, gauge temp 0 to 120degree c temp gauge 0 to 120 deg c dial size 150mm case die cast aluminum ip65 bourdon ss 316movement ss 304 stem bulb connection ss 316 bulb dia 12 mm capillary 10m ss 316 ca ss 304 armour, gauge temp temp gauge 0to150 deg c dial size 150mm case die cast aluminum ip65 bourdon ss 316movement ss bulb dia 12 mm tg connection 1by 4 inch npt tip dia 25m temp gauge 0to150 deg c, temp gauge 0 to 300 deg c dial size 150mm case die cast aluminum ip65 bourdon ss 316 tg connection 1by4 inch npt, temp gauge 0to300 deg c dial size 150mm case die cast aluminum ip65 bourdon ss 316 stem bulb connection ss 316, pressure gauge 0 to25 kgpercm2 pressure gauge dial size 6 150mm aluminium white background with black bezel screwed type bezel weatherproof to ip 68 as per iec 60529 bourdon tube type ss316, pressure gauge minus 0point 1 to plus 0point 3 mpa dial size 100 mm process connection 1by2 bsppressure gauge 36060301 pressure gauge 0point 1 toplus 0point 3 mpa dial size 6 150mm aluminium white background with black marking, pressure transmitter 0 to 25 kg for fire water pump house max w p 500psi 50bar 35kg per cm2 supply 10point 5 55v dc transmitter output 4 to 20 ma with digital signal configured, pressure transmitter 0 to 25kg for foam pump house max w p 500psi or 50bar supply 10point 5 55v dc range 14 to 500 pspoint isolating diaphragm 316l sst sensor fill fluid silicone, vaccum transmitter for ash collection tower max wp 30 psi supply 10point 5 55 dc span 14point 7 to 30 psi, pressure transmitter range 1 to 1point 5 kgper cm2 type in line pressure transmitter measurement type gauge pressure output 4to20 ma with hart protocol accuracy 0point 04percent to minus 0point 04percent
Agency / Dept :
uttar pradesh rajya vidyut utpadan nigam limited UPRVUNL
Due Date :
Oct 16, 2026 (1 day left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17530182
Location : chennai , tamil nadu
LIVE TENDER
tender for set of push button switches for 3 phase locos, set of push button switches for 3 phase locos as per clw spec. no. clw/es/3/0072, alt-j or latest, consisting of following 5 items. -1 illuminated push button constant speed control, booted p ush button head, illuminated push button body, multi led ba9s, green - black bezel 01 no standard,1 8ma - 24v dc green, qty - 01 no./set -2 illuminated push button fault indication / acknowledge boot ed push button head, illuminated push button body, multi led ba9s, yellow - led 380 v ac - standard 18 ma - 24v dc - yellow, qty - 01 no./set -3 push button reset vigilance control, booted push button head, push button body assembly, yellow - black 02 no standard, qty: 01 no./set -4 illuminated swit ch emergency flasher light, selector switch head, flasher light body, contact block, yellow - black bez el 24v dc standard 01 no, standard 24vdc 18 ma, qty - 01 no./set -5 mushroom head push button switch, front dimension: 40mm, cut out: 22.5mm, blue color, 110v dc, 1.5a standard 01 no, qty - 01 no./set. - warranty period: 30 months after the date of delivery
Agency / Dept :
southern railway SR
Due Date :
Oct 30, 2026 (15 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17681995
Location : sonitpur , assam
Source : GEM Tenders
LIVE TENDER
tender for clip w plastic , block ront bumper side rh , bezel assy fog lamp front lh , appron assy front bumper , head lamp assy lh , push pin blk theme , fog lamp front lh , splash shield front lh , clading assy front wheel , facia bumper front , grill bumper front lower , suspension bush kit , engine speed sensor , door beedig complete, clip w plastic, clip w plastic, block ront bumper side rh, bezel assy fog lamp front lh, appron assy front bumper, head lamp assy lh, push pin blk theme, fog lamp front lh, splash shield front lh, clading assy front wheel, facia bumper front, grill bumper front lower, suspension bush kit, engine speed sensor, door beedig complete
Agency / Dept :
indian army
Due Date :
Oct 19, 2026 (4 days left)
Tender Value :
606.05
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17661997
Location : thiruvananthapuram , kerala
Source : GEM Tenders
LIVE TENDER
tender for torque wrench 80-400 nm , torque wrench 40-200 nm , torque wrench 20-100 nm , torque wrench 4-20 nm , torque wrench 2-10 nm , torque wrench 6-50 nm , torque wrench 2-30 cnmm , torque wrench 2-30 cnm , crowfoot spanner size-8 9 10mm , quickrelease fine-tooth ratchet , quickrelease universal joint , square drive adaptor , quickrelease extension , special extension , bit holder , socket set , uniflex socket , socket half inch in tcs inlay , quickrelease t-handle , socket , combination wrench , double open-ended wrench , holder for wrench , double- ended ring wrench , heavy duty ring wrench , flare nut crowfoot wrench , hex. allen key set , box wrench set , ratchet extension rod , nose plier , combination plier l 200 mm , gutter bending plier , reversible screwdriver set , hammer and hollow punch set , warding file set l- 100 mm , hacksaw frame l-300 mm with blade , precision feeler gauge, 0.01 to 1.0 mm , digital height gauge 0-300mm , digital height gauge 0-600mm , digital vernier caliper 0- 150 mm , digital vernier caliper 0-200 mm , analog vernier caliper 0-150 mm , analog vernier caliper 0-200 mm , digital gear micrometer inside and outside measurements , digital dial thickness gauge , analog depth micrometer 0- 25 mm , analog depth micrometer 0-100 mm , work light rechargable , safety knife , oil can , steel rule 300 mm , steel rule 500 mm , steel rule 1000 mm , screw pitch gauge , measuring tape metric and inch 5m , round file , half round file , triangular file , flat file , needle file set , bench vise , adjustable screw spanner , heavy duty pipe wrench , angle plate with mounting attachment 200x200mm , rubber composit mallet set , vacuum cleaner , chisel , hammer balpeen , wire locking tool , allen key ball type , allen key t handle , tool trolley 496x827x1020 mm, 8 drawers , tool boxes portable, 475x420x150mm , hand engraver , cordless drill , weighing balance , double open-ended spanner set , combination plier 160 mm , combination plier 200 mm , reducer set , cross head screwdrivers , slotted screwdrivers , vernier caliper digital 0-300 mm , precision feeler gauge 0.05 to 1 mm , screw pitch gauge 0.25 to 6 mm , lever type dial gauge 0 to 0.8 mm , mechanical plunger type dial gauge 0 to 50 mm , magnification lens , hss drill bits , v-block with clamp , scriber , wire twisting plier l 230 mm , inhex screwdriver socket 4 mm , inhex screwdriver socket 6 mm , inhex screwdriver socket 20 mm long, 10mm , inhex screwdriver socket 102 mm long, 10mm , inhex screwdriver socket 100 mm long, 12mm , metal pipe cutter compact 3 to 35 mm , half round file 260 mm , universal cutter snap off blade cutter , torch light , adjustable wrench, 24 mm , adjustable wrench, 31 mm , circlip plier for outside circlip size 19 to 60 mm, mechanical assembly tools, measuring range- 80-400 nm scale division 20 n m, length- 607 mm, measuring range- 40-200 nm,scale division- 10 nm,length- 467 mm, measuring range- 20-100 nm, scale division 10 nm, length 386 mm, measuring range 4-20 nm, scale division- 0.5 nm, length- 179 mm, measuring range- 2-10 nm,scale division 0.25 nm,length- 179 mm, measuring range- 6-50 nm, scale division- 0.25 nm,length- 315 mm, measuring range- 2-30 cnm, scale division- 0,2 cnm,length- 105 mm, chrome alloy steel, chrome-plated,3/8inch square drive, chrome alloy steel, chrome-plated,1/4inch square drive, 3/8inch external square drive, reversible,80 teeth, chrome-plated, din 3123 / iso 3316,square drive- 3/8inch, length- 60mm, 3/8 to 1/4inch, max. torque 62 nm, chrome plated,din 3123 / iso 3316,length- 28mm, 3/8 to 1/2inch, chrome alloy steel, din 3123 / iso 3316,length- 31mm, 1/4 to 1/2inch, chrome steel, length-28mm, chrome-plated,din 3123 / iso 3316, square drive- 1/4inch,length- 45mm, chrome-plated, din 3123 / iso 3316,size- 10mm, square drive- 3/8inch,length-240mm, cranked,chrome alloy steel, square drive- 3/8inch,length- 150mm, length- 32mm, output hex drive inner-1/4inch,square drive inner-3/8, contains 37-pieces 11 sockets, bi-hex with as-drive profile,3/8inch internal square drive,size-10mm, length- 45.5mm, contains 16-pieces- 9 screwdriver sockets m5, m6, m8, m10, m12, m14, m16, chrome-plated,din 3123 / iso 3316,square drive 1/4inch,length 116mm, size 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24mm, size 5.5 to, 30, 32, 34, 36, 38, 41, 46, 50, 55,60mm, jaws angled 15 degree,durable, slim and lightweight design,high flexural strength due to double-t profile stahlwilles rounded finish, 9 x 9 mm perforation grid,simple, tool-free clamping, sizes 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 24 x 27, 30 x 32 mm, size 24, 27, 30, 32, 36, 38, 42, 46, 50mm, square drive 1/4inch,size 8, 9, 10, 11, 12, 13, 14mm, square drive 3/8inch,size 15, 16, 17,18, 19, 20, 21, 22, 23, 24, 25, 26, 27 mm, square drive 1/2inch,size 28, 30, 32, 34, 36, 38, 40, 41, 42, 46,50mm, contains 10-pieces,9 hex l-keys no. 10760 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10,12 mm, number of tools 11,size6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27, 30 x 32 mm, square drive 1/4inch,size 2, 4, 6, 13, 14,square drive 3/8inch,size 3, 6, 10, 14,square drive 1/2inch,size 2, 3, 5, 10, length 130mm,tip thickness electronics 1.5mm,head length-electronics 24 mm, length 200mm,jaw length 42mm,centre width 8mm, tubular steel handles with plastic handles,length 690mm, reversible hex blades 3, 4, 5, 6 mm, 2 reversible hex blades 3, 4, 5, 6 mm (ball-ended), size 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,17, 18, 19, 20, 21, 22, 24, 25, 30, 32, 33, 34, 35, 40, 45, 50, 55mm, contains 6-pieces 1 file each triangular, round, half-round, square, flat blunt, flat pointed blade length 100 mm, length 450mm,blade length 300mm,tooth density 24 tpi, length 100mm,sheet thickness 0.01, 0.02, 0,03, 0,04, 0,05, 0,06, 0,07, 0,08, 0,09, 0,10, 0,15, 0,20, 0,25, 0,30, 0,35, 0,40, 0,45, 0,50, 0,55, 0,60, 0,65, 0,70, 0,75, 0,80, 0,85, 0,90, 0,95, 1,00 mm number of sheets 28, material stainless steel,accuracy +/- 0.040 mm,range 0-300 mm/0-12 inch,reading 0.010 mm/0.0005 inch, material stainless steel,accuracy +/- 0.040 mm,range 0-600 mm/0-24 inch,reading 0.010 mm/0.0005 inch, measuring range 150/6 mm/inch,length 250mm,battery type cr2032 3v, working temperature 5 to 40 degree ,measurement range 0-200 mm,resolution0.01 mm/0.0005 inch, metric-inch scales,made of stainless steel,vernier 1/20 mm and 1/128inch,delivered in a pouch,measuring range 150/6 mm/inch, outer dia, inner dia, depth and steps, stainless steel,range 0-25, 25-50 mm,reading 0.001 mm, throat depth mm 100,reading 0.001 mm,range 12.5 mm / 0.5 inch,bezel diameter 56 mm,series 142,resolution 0.001 mm, range 0 - 25 mm,reading 0.001 mm, range 0 - 100 mm,reading 0.01 mm, flashlight,flexible worklight with magnetic pick-up,foldable worklight,quick-connect main body, length 174mm, made of plastic,filling volume 0,25 l, metric-inch scales,length 300mm,division top edge 1/16, 1/32, 1/64 inch, metric-inch scales,length 600mm, metric-inch scales,length 1000mm, for 0.25 to 6 mm and 4 to 62 t.p.i metric/whitworth threads,number of sheets 52, with lock,metric-inch scales,length 5m,strap width 16mm, round file,cut 2,with 3-component handle,din 8349,length 300mm, round file,cut 2,with 3-component handle,din 8349,length 380mm, triangular,cut 2,with 3-component handle,din 8349,length 310mm, flat,cut 2,with 3-component handle,din 8349,length 380mm, contains 6-pieces,1 file each round, half-round, triangular, square, flat blunt, flat pointed,length 140mm, 3 1/2 in jaw face wd, 3 1/2 in max jaw opening, length 161, 207, 311, 462mm,max. wrench size 24, 30, 39, 53mm, jaw opening max 77 mm, 90mm,length 450, 600mm,handles red lacquered,pipe diameter max 18inch, 24inch, overall width 8 inch,overall length 8 inch,overall height 8 in, squareness 0.002 inch,parallelism 0.002 inch, harness 55, 75, 90mm,weight 317, 780, 1220g, rated input power 1,200 w,weight 14 kg,container volume, net 28 l,voltage, electrical 230 v, 150x18 172 g, 270x67 176 g,290x82 320 g,320x 99 575 g,350x118 790g, 230 mm wire size 1.6mm, 1.5 to 10mm, 2 to 10mm, number of drawers 8,load capacity 750 kg, 3 trays,can be locked with a padlock,dimensions 475x420x150mm, strokes per minute 6000,sound pressure 86 db a, sound power 97 db a,vibration 7,7 msquare, width 54 mm,tool dimensions length 162 mm,tool dimensions height 202 mm, load range 0 to 15 kg minimum,least count 1 gm,power supply 230v ac, 50hz, content 5.5 x 7, 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27, 25 x 28, 30 x 32 mm, contains 16-pieces ,9 screwdriver sockets m5, m6, m8, m10, m12, m14, m16, length 160mm,jaw length 34mm, length 200mm,jaw length 42mm, square drive 3/8 to1/4inch, 1/2 to 3/8inch, 3/4 to 1/2inch, 1 to 3/4inch, size drive profile pz0, pz1, pz2,length 145, 185, 215mm, size 1, 3, 6,length 160, 240, 325mm, range 0 - 300 mm,range 0 - 12 inch,reading 0.01 mm / 0.0005 inch,working temperature 5 degree to 40 degree c, sheet thickness 0,05, 0,10, 0,15, 0,20, 0,25, 0,30, 0,40, 0,50, 0,60, 0,70, 0,80, 0,90, 1,00 mm,length 100mm, for 0.25 to 6 mm and 4 to 62 t.p.i metric/whitworth threads, number of sheets 52, range mm 0 -0.8 mm,reading 0.01 mm,bezel dia 29 mm,graduation 0 - 40 -0, range mm 0 - 50 mm,reading 0.01 mm,bezel dia 88 mm,graduation 0 -100, 138mm double-lens- supplement lens 25mm 5x- extra large reading page cover -with 3 led light, dia 1-13mm,weight 1600 g,number of tools 25, 40x50x40mm, height - 37mm length - 50mm, material - steel, overall length - 50mm, overall width - 37mm,weight - 1.0kg, with a knurled body,1 straight and 1 angled blade,blades with gun metal finish,length 250 mm, for twisting wires up to dia 1.6 mm 0.06inch, head and handles burnished,length 230mm, size 4mm,length 28mm, size 6mm,length 28mm, size 10mm,length 52mm, chrome-plated,din 7422,size 10mm,length 140mm, chrome-plated,din 7422,size 12mm,length 140mm, length 160 mm,pipe diameter external 3-35 mm,cutting depth max 2.5mm, contains 6-pieces ,1 file each round, half-round, triangular, square, flat blunt, flat pointed,length 140mm, second cut,with 3-component handle,din 8349,blade length 260mm,total length 380mm, with 3 snap-off blades (1 blade mounted, 2 blades in magazine) length 168,blade width 18mm, source battery powered,light source type led,material aluminium,24 w torch light zoomable, size 6,max. wrench size 24mm,total length 161mm, size 12,max. wrench size 31mm,total length 311 mm, for circlips 19-60 mm,length 180 mm,tip diameter 1.8 mm
Agency / Dept :
indian space research organisation ISRO
Due Date :
Oct 28, 2026 (13 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17587464
Location : east khasi hills , meghalaya
Source : GEM Tenders
LIVE TENDER
tender for procurement of items fror cambrian patrol team - tactical t shirt , tactical shirt elite full sleeve , torso full t shirt , tactical nylon riggers belt heavy duty , beanie cap , camo , advanced ripstop tactical pant , blood group type patch , rip away emt pouch , 8 x 5 molle utility pouch , bfna medical backpack , subdued indian silicone flag patch , tactical shoes , advanced sunglasses , round cap , tactical wrist watch water proof , poncho , hand cuff tactical strap , butan egas with burner , luminous stick , camo stick , water proof note pad , insta camera catridge , individual medic bag , torniquet , chest seal , emergency bandage compressed bandage , sterilized cotton pad , nibp machine , air splint kit , hot water bottle , extension board , tactical hydration bladder , infrared lamp , ir torch , emergency light , paracord rope , induction , thermal blanket , intra catch 18g , orpat 2000w heater , drill machine , dry bag large , dry bag small, बीीओ यूशीीषक /boq title, hybrid fabric build 80 percent nylon 20 percent spandex sleeves 70 percent cotton 30 perrcent polyester for breathable durability armour ready ripstop shoulders sleeves and elbows are overlaid with ripstop panels that shrug off abrasion and field wear four tactical pocket dual zippered bicep pockets plus two low profile forearm stashes keep essentials secure and within quick reach twin elbow pad patches reinforced patch zones accept optional padding for prone shooting or rugged crawls velcro patch panels loop fields on both sleeves for unit ids morale patches or reflective markers air mesh vent inserts strategically placed mesh boosts airflow and accelerates moisture removal, durable ripstop polyester cotton construction the collar shoulders and sleeves feature ripstop polyster cotton fabric ensuring superior structure and strength for field use reinforced elbow protection the elbows are reinforced with an additional fabric layer for extra protection and enhanced durability breathable 4 way polyester spandex body crafted with 4 way stretch polyester spandex material the tactical shirt must offers flexibility and mobility mesh inserts on the back and underarms provide ventilation for all day comfort functional design elements features sleeve pockets and a velcro patch for formation signs enhancing practicality and utility, high tech fabric blend composed of 80 percent nylon and 20 percent elastane for optimal elasticity and support features aero chill fabric that disperses body heat keeping the fabric cool to the touch dynamic 4 way stretch material stretches in every direction providing superior mobility and comfort moisture wicking engineered to wick sweat away quickly and dries even faster keeping you dry and comfortable throughout the day perfect fit designed with streamlined fit that is not too tight nor too loose ideal for both active and casual wear, professional heavy duty riggers belt made for military and law enforcement agencies made using high quality nylon and steel buckles with a breaking strength of 18kn or 1800 kgf. belt width 44mm webbing thickness 2.8 mm material nylon 66 webbing steel buckles nylon hook and loop velcro bonded nylon thread size adjustable colour olive green made in india, winter beanie cap knitted woollen cap high quality acrylic wool acrylic blend minimum 250 gsm knitted stretchable and comfortable application field training and outdoor activity resistant to pilling stretching and normal wear, camouflage pattern suitable for field use, 70 percent cotton 30 percent polyester ripstop fabric stretch panels 80 20 nylon lycra 10 pockets unique low profile adjustable waist features uv protection fabric extra pockets sized for tactical use knee articulation bar tacking at major seams stress points wide loops for tactical belts gusseted construction for flexibility and strength enhanced breathability durability must made for comfort rugged use and high performance, stiched velcro back embroidered detail 2x3 inches, trifold emt pouch to carry indl first aid kit quickly ripped away 02 d rings for shoulder strap attachment points 2 inch loop strip in the front for attaching patches carry handle for carrying and quick ripoff dimensions 6x8x3.5 inches colour olive green and black weight 380g, utility pouch with molle straps designed to carry small accessories large zipped compartment with a drain eyelet hole compatible with all molle products 6x2 molle loops at the front 4 attachment straps at the back 500d nylon fabric and nylon webbing anti rust brass snap buttons dimensions 22x12x9cm approx weight 160g, 3 in1 medical backpack for bfna 1 x 10 litres backpack 01 x first aid kit pouch and 01 x medical stuff bag laser cut molle panel on the backpack 04 x compression straps ykk zippers material 1000d cordura nylon capacity 10 litres, indian flag patch for use by soldiers on camouflage uniform made of silicone with hook backing loop patch is included size 2 to 3 inches colour jungle camp and desert camo, waterproof membrane seals out water and lets moisture escape waterproof coated leather and mesh upper waterproof medial zipper for quick on and off bellows tongue keeps out debris protective and abrasion resistant rubber heel and toe cap breathable mesh lining mesh footbed cover cleansport nxt treated for natural odour control comfortbase removable contoured footbed cradles your foot in all day comfort molded nylon arch shank air cushion in the heel absorbs shock and adds stability super rebound compound midsole provides durable shock absorption to help reduce torque and allow for a smooth transition into the midfoot vibram tc5 outsole provides exceptional traction for outdoor multi sport activities boot height 8 inch 203.2mm half pair weight 1lbs 6.91oz 650g, high wrap frames interchangeable lenses adjustable nose piece mil prf 32432a ballistic safety standards ansi z87.1 optical clarity and high mass high velocity impact standards, military hat modelled after models used by us army 100 percent damage resistant and breathable cotton equipped with four vents with mesh to prevent the entry of insects camouflage acu marine digital material 100 percent rip stop cotton, case size 53.3x48.8x16.6mm weight 49g case and bezel material resin band resin band water resistant 100 metre water resistance battery life approx 10 years warranty pd 2 years, fabric 100 percent polyster min 90 percent recycled surface coating 100 percent polyurethane hook and loop fastener hard part polyamide plastic, hand cuff tactical strap, foldable furnace and refill canister kit outdoor gas stove with butane gas cylinder material aluminium portable capacity 225ml lightweight gas burner country of origin india component 1 gas refill 1 stove, type chemical luminous glow stick length approx 150 155mm activation bend snap and shake to activate illumination 360 uniform luminous output glow duration minimum 8 12 hours shelf life minimum 3 4 years from date of manufacture suitable for outdoor night operations and adverse weather conditions, camouflage face solid stick twist up type colours green brown and black camo shades finish non reflective matt finish uniform and smooth coverage without excess greasiness water sweat resistant should be removable with soap and water, waterproof all weather writing pages compact pocket size tactical notebook durable top spiral binding for quick access lightweight and easy to carry in edc kits smooth writing surface with weather resistant pages, dimension 10.2cm x 6.6cm x 4.8 cm brand fujifilm, perfect for carrying medical supplies and first aid kits dimensions 6x8x3.5inch colour olive green and black weight 380 gm, material plastic nylon color as picture shown application for outdoor emergency outdoor survival weight approx 78 75gm, sterile chest seal for mgt fo open sucking chest wound strong adhesion to skin including under moist contaminated conformable to chest contours and movement waterproof impermeable to air and fluids shelf life minimum 3 5 years from dt of manufacturing should comply with applicable medical device quality and safety standards, material cotton and lycra pad size 10cm x 5.0m easy to carry and use superior to all known field dressings useful in primary dressing and also in secondary dressing tourniquets vacuum packed and sterile, measurement 10 cm x 20 cm item dimension 10 x 10 x 5cm item weight 200 gm product style sterile, automatic digital non invasive blood pressure monitor systolic bp diastolic bp and mean arterial pressure measurement and display of pulse rate oscilometric method compact and lightweight suitable for field clinical use 10 by 10 accuracy minimum 1 year warranty, portable reusable emergency splint kit immobilisation and support of suspected fractures, sprains and limb injuries splints suitable for upper and lower limbs lightweight durable and corrosion resistant material with soft protective padding splint material preferably x ray compatible radiolucent multiple sizes suitable for adult upper and lower extremities suitable for field emergency and casualty evacuation situations, hot water bottle for therapeutic warming use capacity 2 litres high quality flexible natural rubber medical grade rubber leak proof seamless and durable construction ribbed textured surface for improved heat distribution minimum 1 year against manufacturing defects, heavy duty electrical extension board power strip rated voltage 230 v ac 50hz rated current 10 16a number of socket 4 to 6 universal 5 by 6 pin socket individual main on off switch with indicator, capacity 3 litres minimum material food grade bpa free non toxic and taste free material flexible durable and puncture resistant suitable for portable drinking water wide mouth opening for easy filling and cleaning leak proof tube connection and reservoir closure compatible with tactical hydration carrieers rucksack molle systems suitable for normal outdoor field operating conditions, type infrared heating lamp power 150 250w wavelength preferably near mid infrared range built in 0 to 30 min adjustable timer heat resistant reflector for directional radiation applicable electrical and medical safety standards, hand held infrared torch wave length 850nm or 940 nm ir high intensity ir led high output suitable for night low light observation focused adjustable beam with good throw ir on off adjustable intensity preferred range minimum 100 200m subject to atmospheric conditions and nv device rugged impact resistant aluminium alloy ip65 or higher battery backup min 2to4 hours continuous operations warranty minimum 1 year accessories battery charger lanyard, rechargeable led emergency light high intensity led voltage 230 v ac 50 hz backup time minimum 4to6 hours charging time preferably 6to8 hours brightness minimum 500 to 1000 lumens lightning modes high to low intensity with emergency mode, type parachute cord rope construction 7 strand or 9 strand inner core material 100 percent nylon diameter approx 4 mm minimum breaking strength 550lb core multiple twisted nylon strands length 30m 50m 100m roll as required high resistance to abrasion and wear, portable induction cooktop power minimum 2000 w input 220 to 240v ac 50hz display digital led lcd display housing durable heat resistant glass ceramic top application cooking heating food and beverages warranty minimum 1 year, high reflectivity metallised polyester reflects minimum 90 to 95 percent of body radiant heat size minimum 210 x 130 cm light weight, gauge 18gauge medical grade ptfe fep polyurethane needle stainless steel introducer needle packaging individually sterile peel open blister packed, rated power 2000w rated voltage 220 240 v ac 50 hz 2 3 heating settings high efficiency heating element overheat protection thermal cut off heat resistant durable housing minimum 1 year against manufacturing defects, portable drill machine power minimum 750w voltage 220 240 v ac 50 hz chuck capacity 13 mm impact rate 0 to 45000 bpm accessories drill bits set chuck key side handle and carrying case warranty minimum 1 year against manufacturing defects, waterproof dry bag large size capacity minimum 20 to 25 litres heavyduty pvc coated polyester 500d to 1000d waterproof fabric 100 percent waterproof dust sand and moisture resistance lightweight relative to capacity extremely strong construction convenient adjustable strap to use it a sling bag added molle construction with 4 anchor points reflective branding to ensure high visibility, waterproof dry bag small size capacity minimum 5 to10 litresheavyduty pvc coated polyester 500d 1000d waterproof fabric 100 percent waterproof dust sand and moisture resistance lightweight relative to capacity extremely strong construction convenient adjustable strap to use it a sling bag added molle construction with 4 anchor points reflective branding to ensure high visibility carry strap and repair patch accessories
Agency / Dept :
indian army
Due Date :
Oct 15, 2026 (Expire Today)
Tender Value :
12.43L
View Documents
T18 Ref No : 17701838
Location : dehradun , uttarakhand
Source : GEM Tenders
LIVE TENDER
tender for spare parts for motor vehicle - camshaft exhaust , camshaft intake , sprocket camshaft , sprocket fip , sprocket crankshaft , chain primary , chain secondary , guide camshaft , fixed guide , arm tensioner primary , arm tensioner secondary , hydraulic tensioner primary , hydraulictensionersecondry , main bearing upper , main bearing lover , kit connecting rod bearing , kit thrust washer set std , kit piston and piston pin , kit piston ring , kit gasket set overhaul , oil filter cartridge , element air filter , water temperature sensor , oil pressure switch , belt , assembly piston cooling jet , assy water pump , valve actuation system , hose assy radiator inlet , hose radiator outlet , kit front cover assembly , ball bearing crankshaft , concentric slave cylinder , threebond , vacuum pump , engine speed sensor , phase sensor , assy thermostat , insulator engine front , pad kit break front , shoe kit lind break , rear styled mudflap lh , rear styled mudflap rh , head lamp bulb , bezel assy gear gaiter high , bush stablizer bar rear , pu bump stop rear , valve intake , valve exhaust , valve guide , valve stem seal , oil seal, spare parts for motor vehicle, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0310aam00240n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0310am0130n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0310am0120n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0312am0100n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0310am0090n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0310em0211n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0310em0221n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0310em0021n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0310eam00701n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0310eam00671n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0310eam00681n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0310em0061n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0310eam00691n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0312bm0322n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0312bm0302n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0312bm0510n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0312am0120n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0312bm0520n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0312bm0530n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0311am0070n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0303bc0071n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0313aam01480n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 03090c0071n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0302aau00190n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0306gm0061n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0306gm0141n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0312bm0431n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0304es0090n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0310bbf00231n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0304dam02500n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0304dam02520n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0311dam00520n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0023127, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0802caa06541n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number npn, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0306eam00040n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 03090c0231n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0305cc0011n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0304dam01290n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0203ad0430n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0603bab02850n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0602bab05380n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605part number 0108fg0250n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0108fg0240n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 1701aaa06141n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0112bag02510a, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0402eaa00831n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0402baa04571n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0310dam00050n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0310dam00060n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0302bm0021n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0310bm0111n, mahindra and mahindra scorpio s 10 4x4 model 2016 chassis no maita4sjxg2k40605 part number 0503ca0330n
Agency / Dept :
indo tibetan border police ITBP
Due Date :
Nov 02, 2026 (18 days left)
Tender Value :
1.07L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17759628
Location : jodhpur , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for led tv 4k uhd 3 x hdmi supported bezel less 55 inch 20w rmrs speakers 2x usb ports 60hz native refresh rate , table wooden , led bulb 2w , photo frame with canvas print , brasso 500, led tv 4k uhd 3 x hdmi supported bezel less 55 inch 20w rmrs speakers 2x usb ports 60hz native refresh rate, table wooden, led bulb 2w, photo frame with canvas print, brasso 500
Agency / Dept :
indian army
Due Date :
Oct 23, 2026 (8 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17764257
Location : chennai , tamil nadu
LIVE TENDER
tender for hpe proliant server., hpe proliant dl380 gen11 8sff nc configure-to-order server or similar make specifications: 1 x intel xeon-silver 4514y 2.0ghz 16-core 150w processor for hpe 2 x hpe 32gb (2x32gb) dual rank x4 ddr5-5600 cas-46-45-45 ec8 registered ecc sm kit 1 x hpe proliant dl380 gen11 2u 8sff x1 tri-mode u .3 drive cage kit 2 x hpe 960gb sata 6g read intensive sff bc multi vendor ssd 1 x hpe 96watt smart s torage lithium-ion battery with 145mm cable kit hpe proliant dl360 gen11 storage controller enablemen t cable kit 1 x hpe mr416i-o gen11 x16 lanes 8gb cache ocp spdm storage controller broadcom bcm571 9 ethernet 1gb 4-port base-t ocp3 adapter for hpe 2 x hpe 1000w flex slot titanium hot plug power sup ply kit hpe proliant dl360 gen11 cpu1 to ocp2 x8 enablement kit hpe bezel lock kit hpe proliant dl3xx gen11 intrusion cable kit hpe gen11 2u bezel kit hpe dl38x gen10 plus 2u cable management arm for r ail kit hpe proliant dl380 gen11 standard heat sink kit hpe proliant dl3xx gen11 easy installation rail 3 kit - warranty period: 36 months after the date of delivery
Agency / Dept :
southern railway SR
Due Date :
Nov 12, 2026 (28 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17657160
Location : thiruvananthapuram , kerala
Source : GEM Tenders
LIVE TENDER
tender for torque wrench 80-400 nm , torque wrench 40-200 nm , torque wrench 20-100 nm , torque wrench 4-20 nm , torque wrench 2-10 nm , torque wrench 6-50 nm , torque wrench 2-30 cnmm , torque wrench 2-30 cnm , crowfoot spanner size-8 9 10mm , quickrelease fine-tooth ratchet , quickrelease universal joint , square drive adaptor , quickrelease extension , special extension , bit holder , socket set , uniflex socket , socket half inch in tcs inlay , quickrelease t-handle , socket , combination wrench , double open-ended wrench , holder for wrench , double- ended ring wrench , heavy duty ring wrench , flare nut crowfoot wrench , hex. allen key set , box wrench set , ratchet extension rod , nose plier , combination plier l 200 mm , gutter bending plier , reversible screwdriver set , hammer and hollow punch set , warding file set l- 100 mm , hacksaw frame l-300 mm with blade , precision feeler gauge, 0.01 to 1.0 mm , digital height gauge 0-300mm , digital height gauge 0-600mm , digital vernier caliper 0- 150 mm , digital vernier caliper 0-200 mm , analog vernier caliper 0-150 mm , analog vernier caliper 0-200 mm , digital gear micrometer inside and outside measurements , digital dial thickness gauge , analog depth micrometer 0- 25 mm , analog depth micrometer 0-100 mm , work light rechargable , safety knife , oil can , steel rule 300 mm , steel rule 500 mm , steel rule 1000 mm , screw pitch gauge , measuring tape metric and inch 5m , round file , half round file , triangular file , flat file , needle file set , bench vise , adjustable screw spanner , heavy duty pipe wrench , angle plate with mounting attachment 200x200mm , rubber composit mallet set , vacuum cleaner , chisel , hammer balpeen , wire locking tool , allen key ball type , allen key t handle , tool trolley 496x827x1020 mm, 8 drawers , tool boxes portable, 475x420x150mm , hand engraver , cordless drill , weighing balance , double open-ended spanner set , combination plier 160 mm , combination plier 200 mm , reducer set , cross head screwdrivers , slotted screwdrivers , vernier caliper digital 0-300 mm , precision feeler gauge 0.05 to 1 mm , screw pitch gauge 0.25 to 6 mm , lever type dial gauge 0 to 0.8 mm , mechanical plunger type dial gauge 0 to 50 mm , magnification lens , hss drill bits , v-block with clamp , scriber , wire twisting plier l 230 mm , inhex screwdriver socket 4 mm , inhex screwdriver socket 6 mm , inhex screwdriver socket 20 mm long, 10mm , inhex screwdriver socket 102 mm long, 10mm , inhex screwdriver socket 100 mm long, 12mm , metal pipe cutter compact 3 to 35 mm , half round file 260 mm , universal cutter snap off blade cutter , torch light , adjustable wrench, 24 mm , adjustable wrench, 31 mm , circlip plier for outside circlip size 19 to 60 mm, mechanical assembly tools, measuring range- 80-400 nm scale division 20 n m, length- 607 mm, measuring range- 40-200 nm,scale division- 10 nm,length- 467 mm, measuring range- 20-100 nm, scale division 10 nm, length 386 mm, measuring range 4-20 nm, scale division- 0.5 nm, length- 179 mm, measuring range- 2-10 nm,scale division 0.25 nm,length- 179 mm, measuring range- 6-50 nm, scale division- 0.25 nm,length- 315 mm, measuring range- 2-30 cnm, scale division- 0,2 cnm,length- 105 mm, chrome alloy steel, chrome-plated,3/8inch square drive, chrome alloy steel, chrome-plated,1/4inch square drive, 3/8inch external square drive, reversible,80 teeth, chrome-plated, din 3123 / iso 3316,square drive- 3/8inch, length- 60mm, 3/8 to 1/4inch, max. torque 62 nm, chrome plated,din 3123 / iso 3316,length- 28mm, 3/8 to 1/2inch, chrome alloy steel, din 3123 / iso 3316,length- 31mm, 1/4 to 1/2inch, chrome steel, length-28mm, chrome-plated,din 3123 / iso 3316, square drive- 1/4inch,length- 45mm, chrome-plated, din 3123 / iso 3316,size- 10mm, square drive- 3/8inch,length-240mm, cranked,chrome alloy steel, square drive- 3/8inch,length- 150mm, length- 32mm, output hex drive inner-1/4inch,square drive inner-3/8, contains 37-pieces 11 sockets, bi-hex with as-drive profile,3/8inch internal square drive,size-10mm, length- 45.5mm, contains 16-pieces- 9 screwdriver sockets m5, m6, m8, m10, m12, m14, m16, chrome-plated,din 3123 / iso 3316,square drive 1/4inch,length 116mm, size 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24mm, size 5.5 to, 30, 32, 34, 36, 38, 41, 46, 50, 55,60mm, jaws angled 15 degree,durable, slim and lightweight design,high flexural strength due to double-t profile stahlwilles rounded finish, 9 x 9 mm perforation grid,simple, tool-free clamping, sizes 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 24 x 27, 30 x 32 mm, size 24, 27, 30, 32, 36, 38, 42, 46, 50mm, square drive 1/4inch,size 8, 9, 10, 11, 12, 13, 14mm, square drive 3/8inch,size 15, 16, 17,18, 19, 20, 21, 22, 23, 24, 25, 26, 27 mm, square drive 1/2inch,size 28, 30, 32, 34, 36, 38, 40, 41, 42, 46,50mm, contains 10-pieces,9 hex l-keys no. 10760 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10,12 mm, number of tools 11,size6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27, 30 x 32 mm, square drive 1/4inch,size 2, 4, 6, 13, 14,square drive 3/8inch,size 3, 6, 10, 14,square drive 1/2inch,size 2, 3, 5, 10, length 130mm,tip thickness electronics 1.5mm,head length-electronics 24 mm, length 200mm,jaw length 42mm,centre width 8mm, tubular steel handles with plastic handles,length 690mm, reversible hex blades 3, 4, 5, 6 mm, 2 reversible hex blades 3, 4, 5, 6 mm (ball-ended), size 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,17, 18, 19, 20, 21, 22, 24, 25, 30, 32, 33, 34, 35, 40, 45, 50, 55mm, contains 6-pieces 1 file each triangular, round, half-round, square, flat blunt, flat pointed blade length 100 mm, length 450mm,blade length 300mm,tooth density 24 tpi, length 100mm,sheet thickness 0.01, 0.02, 0,03, 0,04, 0,05, 0,06, 0,07, 0,08, 0,09, 0,10, 0,15, 0,20, 0,25, 0,30, 0,35, 0,40, 0,45, 0,50, 0,55, 0,60, 0,65, 0,70, 0,75, 0,80, 0,85, 0,90, 0,95, 1,00 mm number of sheets 28, material stainless steel,accuracy +/- 0.040 mm,range 0-300 mm/0-12 inch,reading 0.010 mm/0.0005 inch, material stainless steel,accuracy +/- 0.040 mm,range 0-600 mm/0-24 inch,reading 0.010 mm/0.0005 inch, measuring range 150/6 mm/inch,length 250mm,battery type cr2032 3v, working temperature 5 to 40 degree ,measurement range 0-200 mm,resolution0.01 mm/0.0005 inch, metric-inch scales,made of stainless steel,vernier 1/20 mm and 1/128inch,delivered in a pouch,measuring range 150/6 mm/inch, outer dia, inner dia, depth and steps, stainless steel,range 0-25, 25-50 mm,reading 0.001 mm, throat depth mm 100,reading 0.001 mm,range 12.5 mm / 0.5 inch,bezel diameter 56 mm,series 142,resolution 0.001 mm, range 0 - 25 mm,reading 0.001 mm, range 0 - 100 mm,reading 0.01 mm, flashlight,flexible worklight with magnetic pick-up,foldable worklight,quick-connect main body, length 174mm, made of plastic,filling volume 0,25 l, metric-inch scales,length 300mm,division top edge 1/16, 1/32, 1/64 inch, metric-inch scales,length 600mm, metric-inch scales,length 1000mm, for 0.25 to 6 mm and 4 to 62 t.p.i metric/whitworth threads,number of sheets 52, with lock,metric-inch scales,length 5m,strap width 16mm, round file,cut 2,with 3-component handle,din 8349,length 300mm, round file,cut 2,with 3-component handle,din 8349,length 380mm, triangular,cut 2,with 3-component handle,din 8349,length 310mm, flat,cut 2,with 3-component handle,din 8349,length 380mm, contains 6-pieces,1 file each round, half-round, triangular, square, flat blunt, flat pointed,length 140mm, 3 1/2 in jaw face wd, 3 1/2 in max jaw opening, length 161, 207, 311, 462mm,max. wrench size 24, 30, 39, 53mm, jaw opening max 77 mm, 90mm,length 450, 600mm,handles red lacquered,pipe diameter max 18inch, 24inch, overall width 8 inch,overall length 8 inch,overall height 8 in, squareness 0.002 inch,parallelism 0.002 inch, harness 55, 75, 90mm,weight 317, 780, 1220g, rated input power 1,200 w,weight 14 kg,container volume, net 28 l,voltage, electrical 230 v, 150x18 172 g, 270x67 176 g,290x82 320 g,320x 99 575 g,350x118 790g, 230 mm wire size 1.6mm, 1.5 to 10mm, 2 to 10mm, number of drawers 8,load capacity 750 kg, 3 trays,can be locked with a padlock,dimensions 475x420x150mm, strokes per minute 6000,sound pressure 86 db a, sound power 97 db a,vibration 7,7 msquare, width 54 mm,tool dimensions length 162 mm,tool dimensions height 202 mm, load range 0 to 15 kg minimum,least count 1 gm,power supply 230v ac, 50hz, content 5.5 x 7, 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27, 25 x 28, 30 x 32 mm, contains 16-pieces ,9 screwdriver sockets m5, m6, m8, m10, m12, m14, m16, length 160mm,jaw length 34mm, length 200mm,jaw length 42mm, square drive 3/8 to1/4inch, 1/2 to 3/8inch, 3/4 to 1/2inch, 1 to 3/4inch, size drive profile pz0, pz1, pz2,length 145, 185, 215mm, size 1, 3, 6,length 160, 240, 325mm, range 0 - 300 mm,range 0 - 12 inch,reading 0.01 mm / 0.0005 inch,working temperature 5 degree to 40 degree c, sheet thickness 0,05, 0,10, 0,15, 0,20, 0,25, 0,30, 0,40, 0,50, 0,60, 0,70, 0,80, 0,90, 1,00 mm,length 100mm, for 0.25 to 6 mm and 4 to 62 t.p.i metric/whitworth threads, number of sheets 52, range mm 0 -0.8 mm,reading 0.01 mm,bezel dia 29 mm,graduation 0 - 40 -0, range mm 0 - 50 mm,reading 0.01 mm,bezel dia 88 mm,graduation 0 -100, 138mm double-lens- supplement lens 25mm 5x- extra large reading page cover -with 3 led light, dia 1-13mm,weight 1600 g,number of tools 25, 40x50x40mm, height - 37mm length - 50mm, material - steel, overall length - 50mm, overall width - 37mm,weight - 1.0kg, with a knurled body,1 straight and 1 angled blade,blades with gun metal finish,length 250 mm, for twisting wires up to dia 1.6 mm 0.06inch, head and handles burnished,length 230mm, size 4mm,length 28mm, size 6mm,length 28mm, size 10mm,length 52mm, chrome-plated,din 7422,size 10mm,length 140mm, chrome-plated,din 7422,size 12mm,length 140mm, length 160 mm,pipe diameter external 3-35 mm,cutting depth max 2.5mm, contains 6-pieces ,1 file each round, half-round, triangular, square, flat blunt, flat pointed,length 140mm, second cut,with 3-component handle,din 8349,blade length 260mm,total length 380mm, with 3 snap-off blades (1 blade mounted, 2 blades in magazine) length 168,blade width 18mm, source battery powered,light source type led,material aluminium,24 w torch light zoomable, size 6,max. wrench size 24mm,total length 161mm, size 12,max. wrench size 31mm,total length 311 mm, for circlips 19-60 mm,length 180 mm,tip diameter 1.8 mm
Agency / Dept :
indian space research organisation ISRO
Due Date :
Oct 28, 2026 (13 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16835389
Location : dimapur , nagaland
Source : GEM Tenders
tender for bezels assy front rh , bezels assy front lh
Agency / Dept :
indian army
Due Date :
Aug 28, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Bezel. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Bezel sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Bezel Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Bezel, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Bezel Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Bezel Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Bezel.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Bezel depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Bezel Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Bezel bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Bezel. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Bezel, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Bezel, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Bezel?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Bezel tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Bezel?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Bezel, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Bezel is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All