sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

14Latest Adjustable frequency drive Tenders List

Latest Adjustable frequency drive Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Adjustable frequency drive tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Adjustable frequency drive tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Adjustable frequency drive Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Adjustable frequency drive tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Adjustable frequency drive Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Adjustable frequency drive Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Adjustable frequency drive Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Adjustable frequency drive tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Adjustable frequency drive Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Adjustable frequency drive sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Adjustable frequency drive tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Adjustable frequency drive tenders.

Is EMD mandatory for all Adjustable frequency drive tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Adjustable frequency drive work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Adjustable frequency drive tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Adjustable frequency drive Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16812298
Location : jodhpur , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for tachometer digital , tong tester clamp meter , megger insulation tester , 3- point d.c. starter , 4- point d.c. starter , wheatstone bridge , single phase variable auto transformer , phase sequence indicator , growler , ac starters 1 each , function generator , electric soldering iron , discrete component trainer , domestic appliances 1 each , oil testing kit , inverter with battery , voltage stabilizer , dc power supply , desktop computer , transformer single phase 1 kva , ceiling fan coil winding machine , ev charger 3 phase , plumb bob , set of rowel punch , conduit pipe cutting and threading machines adjustable , conduit pipe bending machine,suitable , torque wrench , solid state solar based single phase , 3 phase kw meter digital , meter reading instrument mri , wire stripper , bus bar bending machine , bldc motor with controller , servo motor with resolver , pmsm with controller , current transformer , potential transformer , solar panel with battery , mppt based charge controller , digital timer on delay and off delay 230v 1 each , impulse relay , dusk and dawn switch , inkjet laser printer , motor-generator ac to dc , d.c. compound generator , dc compound motor with starter and switch , motor generator dc to ac set consisting of , ac squirrel cage motor with star delta starter , ac phase- wound slip ring motor with starter switch , universal motor with starter switch , synchronous motor with accessories like starter, excitation arrangements , thyristor igbt controlled d.c. motor drive with tacho-generator feedback arrangement , thyristor igbt controlled a.c. motor drive with , electrical machine trainer , pillar electric drill machine motorized , motorised bench grinder , a.c. series type motor , single phase capacitor motor with starter switch , manual motor coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter single phase , smart meter 3 phase , bus bar punching machine , rawal tool holder and bit , scriber , foot print grip , spirit level , forge with hand blower , tower ladder on type wheels , portable extension ladder , solar street light , solar traffic light , solar dc pump , motion detector , single phasing preventer , solar street light lamp set , d.c. compound motor with control panel , d.c. shunt motor , d. c. series motor , mg set , cctv camera kit , ups with battery , lcd led projector , dmx controller , field regulator , working bench , wiring board , instructors table , instructors chair , metal rack , lockers with drawers 10 drawer , almirah , black board white board , fire extinguisher co2, 2 kg , fire buckets , student table , student stool , gi pipe bending machine 19 mm to 32 mm , battery charger, 0 - 6 - 9 - 12 - 24 - 48 v, 30 amp , battery charger 15 volts, current controlled , hammer ball peen 250gm , ac starters , automatic reverse forward starter , single phase k.w.h meter digital 5a, 250 v a. c , three phase k.w.h meter digital 25a, 415 v a. c , a.c. voltmeter , milli voltmeter centre zero analog , ammeter mc analog , ac ammeter mi , ammeter mc analog, portable box type housed in bakelite case 0-25 a , ammeter m.c. centre zero 5-0-5amp , crimping tool hydraulic 16-300 sq, lab of electrician and wireman, measuring steel tape, combination plier insulated, screwdriver insulated, pliers long nose insulated, heavy duty screwdriver insulated, screw driver, terminal screw driver, pliers side cutting insulated, punch centre, knife double bladed electrician, neon tester, steel rule, hammer, cross peen with handle 250gm, hammer, ball peen with handle, pincer, c- clamp, d.e. metric spanner double ended 6 - 32 mm, spanner adjustable drop forged, spanner set de, blow lamp brass one litre, chisel firmer with wooden handle, allen key alloy steel, grease gun, bradawl, pully puller with 3 legs 150 mm and 300 mm, bearing puller inside and outside, hand vice, pipe vice cast iron with hardened jaw open type- 100 mm, table vice-100 mm, bench vice-150 mm, crimping tool 1 each, hydraulic crimping tool for ug cable, wire cutter and stripper, mallet hard wood, hacksaw frame, try square-150 mm blade, outside calliper inside calliper 1 each, divider, tweezers, drill s.s. twist block, gauge, wire imperial stainlees steel marked in swg and mm, file half round, file flat, file half round 2nd cut, copper bit soldering iron., de soldering gun, contactor and auxiliary contacts, contactor and auxiliary contacts, limit switch, rotary switch, electromagnetic cutout relay 1 each, portable electric drill machine, cordless drilling machine, load bank heater type, pvc pipe bending spring, brake test arrangement with two spring balance rating, out side micrometer, knife switch dpdt fitted with fuse terminals, knife switch tpdt fitted with fuse terminals, rheostat sliding type, rubber mat, safety belt, ohm meter series type and shunt type, portable box type, multi meter, multifunction meter, voltmeter m.c., ammeter m.i. 0-5 amp, digital wattmeter, power factor meter, frequency meter, lux meter, tachometer digital, tong tester clamp meter, megger insulation tester, 3- point d.c. starter, 4- point d.c. starter, wheatstone bridge, single phase variable auto transformer, phase sequence indicator, growler, ac starters 1 each, function generator, electric soldering iron, discrete component trainer, domestic appliances 1 each, oil testing kit, inverter with battery, voltage stabilizer, dc power supply, desktop computer, transformer single phase 1 kva, ceiling fan coil winding machine, ev charger 3 phase, plumb bob, set of rowel punch, conduit pipe cutting and threading machines adjustable, conduit pipe bending machine,suitable, torque wrench, solid state solar based single phase, 3 phase kw meter digital, meter reading instrument mri, wire stripper, bus bar bending machine, bldc motor with controller, servo motor with resolver, pmsm with controller, current transformer, potential transformer, solar panel with battery, mppt based charge controller, digital timer on delay and off delay 230v 1 each, impulse relay, dusk and dawn switch, inkjet laser printer, motor-generator ac to dc, d.c. compound generator, dc compound motor with starter and switch, motor generator dc to ac set consisting of, ac squirrel cage motor with star delta starter, ac phase-wound slip ring motor with starter switch, universal motor with starter switch, synchronous motor with accessories like starter, excitation arrangements, thyristor igbt controlled d.c. motor drive with tacho-generator feedback arrangement, thyristor igbt controlled a.c. motor drive with, electrical machine trainer, pillar electric drill machine motorized, motorised bench grinder, a.c. series type motor, single phase capacitor motor with starter switch, manual motor coil winding machine, primary current injection set, stepper motor with digital controller, shaded pole motor, smart meter single phase, smart meter 3 phase, bus bar punching machine, rawal tool holder and bit, scriber, foot print grip, spirit level, forge with hand blower, tower ladder on type wheels, portable extension ladder, solar street light, solar traffic light, solar dc pump, motion detector, single phasing preventer, solar street light lamp set, d.c. compound motor with control panel, d.c. shunt motor, d. c. series motor, mg set, cctv camera kit, ups with battery, lcd led projector, dmx controller, field regulator, working bench, wiring board, instructors table, instructors chair, metal rack, lockers with drawers 10 drawer, almirah, black board white board, fire extinguisher co2, 2 kg, fire buckets, student table, student stool, gi pipe bending machine 19 mm to 32 mm, battery charger, 0 - 6 - 9 - 12 - 24 - 48 v, 30 amp, battery charger 15 volts, current controlled, hammer ball peen 250gm, ac starters, automatic reverse forward starter, single phase k.w.h meter digital 5a, 250 v a. c, three phase k.w.h meter digital 25a, 415 v a. c, a.c. voltmeter, milli voltmeter centre zero analog, ammeter mc analog, ac ammeter mi, ammeter mc analog, portable box type housed in bakelite case 0-25 a, ammeter m.c. centre zero 5-0-5amp, crimping tool hydraulic 16-300 sq mm
Agency / Dept :
department of technical education DTE
Due Date :
Sep 07, 2026 (9 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16664094
Location : nadia , west bengal
Source : GEM Tenders
LIVE TENDER
tender for workshop items vertical multistage centrifugal pump (q3) , hydraulic trainer kit each consisting of the following matching components and accessories 16 items , slip gauge , snap guage , plug guage , dial test indicator , sine bar , dial vernier caliper , screw thread micrometer , depth micrometer , digital vernier caliper , digital micrometer outside , comparators gauge dial indication , surface roughness comparision plates , vernier beveal procter , carbide wear block , stilson wrenches , pipe cutter wheel type , pipe bender machine , adjjustable pipe chain tonge , adjustavble spanner , combination set , micrometer outside , micrometer intside , vernier caliper , vernier height gauge , vernier bevel protector , file , hacksaw frame , machine vice swivel base , discrete component trainer , linear ic trainer , digital ic trainer , voltage stabilizer , dc power supply , battery charger , current transformer , potential transformer , solar panel with battery , d.c. compound generator , synchronous motor , thyristor igbt controlled dc motor drive , thyristor igbt controlled ac motor drive , electrical machine trainer , motorised bench grinder , ac series type motor , manual motor coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger home , temperature controlled soldering iron , wheat stone bridge with galvanometer and battery , single phase variable auto transformer , phase sequence indicator , growler , ohm meter , milli voltmeter , kilo wattmeter analog , digital wattmeter , a.c. energy meter , frequency meter , magnetic flux meter , lux meter , tachometer , tong tester clamp meter , air ratchet , air impact wrench , chain pulley block capacity with tripod stand , compression testing gauge , engineers stethoscope , piston ring compressor , piston ring expander and remover , hydraulic jack hi lift type , two post car lift capacity 4000 kg , wheel alignment machine computerized 3d optional , torque wrenches , diesel engine crdi 4 stroke , automotive diesel smokemeter for diesel engine , spring tension tester , trolley type portable air compressor , cut section of 4 or 6 cylinder diesel engine with moving condition to show momentum of internal parts , fuel injection test bench for calibration of fuel pump , diesel engine six cylinder in running condition , circulating water pump small , gauge manifold with gauges , dumpy level , auto level , theodolite transit , prismatic compass , dgps latest version , hand gps latest version , rachet type pipe die set , dies and die stock cup model , adjustable spanner , pipe wrench , pipe cutter , hammering hand drilling machine , electric water heater, workshop items, as per specification
Agency / Dept :
department of industrial training
Due Date :
Aug 31, 2026 (2 days left)
Tender Value :
50.04L
View Documents
T18 Ref No : 16639046
Location : coimbatore , tamil nadu
Source : GEM Tenders
LIVE TENDER
tender for item 1 , item 2 , item 3 , item 4 , item 5 , item 6 , item 7 , item 8 , item 9 , item 10 , item 11 , item 12 , item 13 , item 14 , item 15 , item 16 , item 17 , item 18 , item 19 , item 20 , item 21 , item 22 , item 23 , item 24 , item 25 , item 26 , item 27 , item 28 , item 29 , item 30 , item 31 , item 32 , item 33 , item 34 , item 35 , item 36 , item 37 , item 38 , item 39 , item 40 , item 41 , item 42 , item 43 , item 44 , item 45 , item 46 , item 47 , item 48 , item 49 , item 50 , item 51 , item 52 , item 53 , item 54 , item 55 , item 56 , item 57 , item 58 , item 59 , item 60 , item 61 , item 62 , item 63 , item 64 , item 65 , item 66 , item 67 , item 68 , item 69 , item 70 , item 71 , item 72 , item 73 , item 74 , item 75 , item 76 , item 77 , item 78 , item 79 , item 80 , item 81 , item 82 , item 83 , item 84 , item 85 , item 86 , item 87 , item 88 , item 89 , item 90 , item 91 , item 92 , item 93 , item 94 , item 95 , item 96 , item 97 , item 98 , item 99 , item 100 , item 101 , item 102 , item 103 , item 104 , item 105 , item 106 , item 107 , item 108 , item 109 , item 110 , item 111 , item 112 , item 113 , item 114 , item 115 , item 116 , item 117 , item 118 , item 119 , item 120, supply of electrical spares, 1600a main moving contacts, cat ref. no. 16d / 16n, movmain 16d, for c&s make acb aha series, 2500 a main isolating contacts (jaw contacts), cat ref. no. 25d / 25n-30s, cs-mic-25d, set of 2, for c&s make acb aha series, 1600 a main isolating contacts (jaw contacts), cat ref. no. 16d / 16n, cs-mic-16d, set of 2, for c&s make acb aha series, 4pole 1600 a arcing contacts, , cat. ref. no. 16d / 16n, cs-arccont-16d, (set of 1 no. fixed 1 no. moving), for c&s make acb aha series, 2500 a acb pole separator (barrier), cat no. pole-septr-20-25, for c&s make acb aha series, 36 way set of three contact block on acb side & six block on cradle side, cat. ref. no. 6d-16d/06n-20s, 4p, cs-aih-3-116 (4p), for c&s make acb aha series, 36 way set of three contact block on acb side & six block on cradle side, cat. ref. no. 20d-25d/25n-30s, 4p, cs-aih-3-220 (4p), current transfomer 1600/0.2 a, cat. ref. no. cs-wmct-164, cs-atbwm-160, for c&s make acb aha series, current transformer 2500/0.2 a, cat. ref. no. cs-wmct-164, cs-atbwm-225 for c&s make acb aha series, shunt trip coil cat. ref. no. 6d-16d /08n 208 & 20d -40d/30s-40s (aha), cs-avh-s-220-xx for c&s make acb aha series, closing coil cat. ref. no. 6d-16d /08n-20s ( aha ) & 20d -40d/30s-41s (aha), cs-avh-c-220-xx for c&s make acb aha series, uv coil ct. ref. no. 6d-16d/06n-20s, cs-auh-v-a-xx for c&s make acb aha series, uv coil cat. ref. no. 20d-40d/25n-40s / 50c-60c , cs-auh-v-b-xx, for c&s make acb aha series, 1600a , 4p frp shutter assebly 6d-16d / 06n-16n, 4 pole, cat. ref. no. ash-1 (4p), for c&s make acb aha series, 2500a , 4p frp shutter assebly 20d-25d/30s, 4 pole cat. ref. no. ash-2 (4p), for c&s make acb aha series, auxillary switch 14 way (7no+7nc) cat. ref. no. 6d-16d/06n-20s cs-axh-7a7b-116, for c&s make acb aha series, auxillary switch 14 way cat. ref. no. 20d-40d/25n-40s / 50c-60c cs-axh-7a7b-22 0, for c&s make acb aha series, arc chutes cat. ref. no. 25d/30s, cs-arccht-25d, for c&s make acb aha series, arc chutes cat. ref. no. 6d-16d/06n-20n, cs-arccht-06d-16d, for c&s make acb aha series, 1600a/2500a closing latch for c&s make acb aha series, micro switch for motor cut off 6d-40d/06n-40s /50c-60c, model- microsw, for c&s make acb aha series, 2500 a trip shaft, for c&s make acb aha series, 1600 a trip shaft, for c&s make acb aha series, supply of c&s make acb, ah-25d 4p edo with micropro-5.1t with complete set, communication module for micropro 4.1/5.1 release. model- cspscm-micropro for c&s make acb aha series, c-power acb 1000a uv coil, 240v, 50hz ac for l&t make, model- sl92720b000, c-power acb 1000a shunt coil, 240v, 50hz ac for l&t make, model- sl927180b00, c-power acb 1000a closing coil, 240v, 50hz ac for l&t make, supply of 3 phase multi function meter rishi master 3440 with support rs port 485., 100 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse1m125atm4p-x., 125 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse1m125atm4p-x, 160 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse2m250atm4p-x, 200 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse2m250atm4p-x, 63 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv510345., 125 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv516342, 160 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv516343, 200 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv525342, 250a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv525343, 400a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv540309, 10kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4102j040 complete as required., 20kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4202j040 complete as required., 25 kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4252j040 complete as required., cylindrical hrc fuse links type hf of rating 63 amps, make- - l&t, cat no- - sf90159, or equivalent, cylindrical hrc fuse links type hf of rating 40 amps, make- - l&t, cat no- - sf90143, or equivalent, cylindrical hrc fuse links type hf of rating 32 amps, make- - l&t, cat no- - sf90142, or equivalent, cylindrical hrc fuse links type hf of rating 16 amps, make- - l&t, cat no- - sf90150, or equivalent, off set clip in type fuse links type hbc of rating 2 amps, type- cns, iec 269,, off set clip in type fuse links type hbc of rating 4 amps, type- cns, iec 269,, off set clip in type fuse links type hbc of rating 6 amps, type- cns, iec 269,, 63a on-load changeover switch (manual) in sheet steel enclosure, suitable for switching between two power sources (mains and standby supply), with ac-23a utilization category, 4 pole, suitable for 415v, 50hz, three-phase system., supply of 32a motor protection circuit breaker (mpcb), suitable for three-phase motor protection, with adjustable thermal overload and magnetic short-circuit protection, conforming to relevant is/iec standards., 1.5 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (fr-lsh) grade wires suitable for domestic and industrial purpose (each - 90 mtrs. coil), 2.5 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (frls) grade wires suitable for domestic and industrial purpose (each - 90 mtrs. coil), 4 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (fr-lsh) grade wires suitable for domestic and industrial purpose(each - 90 mtrs. coil), 2 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment)-(each - 100 mtrs. coil), 3 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 3 core 2.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 3 core 4 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment)- (each - 100 mtrs. coil), 8 core 1.0 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 4 core 2.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 6 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), category 6 (cat6) utp lan cable, 4-pair, 23 awg electrolytic grade solid annealed bare copper conductor, hdpe insulated, overall pvc/lszh sheathed, conforming to tia/eia-568-c.2 and iso/iec 11801, suitable for data transmission up to 1 gbps and 250 mhz frequency, complete as required. (each - 100 mtrs. coil), miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. sp mcb, 16 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. dp mcb, 25 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. dp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. tp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp mcb, 63a, c curve, isolator having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp isolator, 100a, 5 pin, 32a, 220-440vac, industrial panel socket with plug ip44 waterproof plug socket male female connector (plug & socket), 6 amps modular one way switch of make- - legrand, model- - myrius, cat no- - 6792 00 or equivalent, 16 amps modular one way switch of make- - legrand, model- - myrius, cat no- - 6792 09 or equivalent, 6 amps modular two way switch of make- - legrand, model- - myrius, cat no- - 6792 01 or equivalent, 6 amps modular bell switch of make- - legrand, model- - myrius, cat no- - 6792 20 or equivalent, 6 amps modular socket of make- - legrand, model- - myrius, cat no- - 6792 35 or equivalent, 16 amps modular socket of make- - legrand, model- - myrius, cat no- - 6792 30 or equivalent, blanking plate of make- - legrand, model- - myrius, cat no- - 6792 76 or equivalent, modular 2 module electronic fan regulator of make- - legrand, model- - myrius, cat no- - 6792 39 or equivalent, 2 module modular pvc surface mounting box with base cover plate, 3 module modular pvc surface mounting box with base cover plate, 4 module modular pvc surface mounting box with base cover plate, 6 module modular pvc surface mounting box with base cover plate, 8 module modular pvc surface mounting box with base cover plate, 12 module modular pvc surface mounting box with base cover plate, 6/16amp combined switch and socket, 3 in one, universal s.s. combined, with safety shutter & pvc gang box., dingdong doorbell, electronic suitable for operation in 220v ac supply, havells/crompton or equilant make, 20 w, 1200 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications. thd lessthan10%, 36w, 1200 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications. thd lessthan10%, 10w, 600 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications., 10w min, b22 led bulb made up of integrated electronic driver along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications., 10w led type bulkhead luminaire with cool white colour temperature, efficiency of led light fitting minimum 110 lm/w, pf equal to 0.95 or more, thd should be less than 10% , minimum ip 65/66 protection with housing material made of high pressure die cast aluminium /standard alloy suitable for outdoor application suitable for operation on 230 v+/- 10%, 50hz, single phase ac supply and as per technical specification with all its accessories, driver etc. as complete., led flood light led luminaire in die-cast aluminium housing, ip66 flood light suitable for operating on voltage range (120 - 270v ac) single phase, 50hz supply of following rating. rating - 100w, led flood light led luminaire in die-cast aluminium housing, ip66 flood light suitable for operating on voltage range (120 - 270v ac) single phase, 50hz supply of following rating. rating - 200w, led flood light luminaire with secondary optical lens having minimum output of 120 lm/watt and rated power not exceeding 250 watts with 5 years warranty designed with powder coated pressure die cast aluminium housing, frame, ms mounting bracket, integral driver with surge protection, heat resistant toughned glass, conforming to ip 65/ip66 & ik 07 protection etc. complete as required. (led & power drive should meet the aai specifications. rating - 250 w led -bajaj praze f 300l wh nb-a5 tg sd model or equilanet, supply of 45w led type streetlight pole arm mountable luminaire with 5700k colour temperature, efficiency of led light fitting minimum 110lm/w, pf equal to 0.95 or more, thd should be less than 10% , minimum ip 65/66 protection with housing material made of high pressure die cast aluminium /standard alloy suitable for outdoor application with manufacturer name/logo embossed in the housing body or on aluminium plate etc. complete as required, all prewired up to terminal block and suitable for operation on 230 v+/- 10%, 50hz, single phase ac supply and as per technical specification with all its accessories, driver etc. as complete., supply of 12w light dome (white in colour) for garden lights, make crompton solar eclipse or suitable for existing pole., supply of 7w led spot light for lift cabin make- philips, model- starfit next or equivalent, supply of 5w, 1 ft led batten light, led type twin dome red aviation obstacle light fixture low intensity type b as per icao annex-14 , ip 66, operating on 230v ac 50 or 60hz input supply (operating band of 90v to 260v ac) direct mounting type complete as required as per the technical specifications., 1200 mm sweep, 5 star rated, bldc motor ceiling fan suitable for operating on 230 v ac etc., 1400 mm sweep, 5 star rated, ceiling fan suitable for operating on 230 v ac etc., 250 mm sweep exhaust fan with pvc body suitable for operation on 230v single phase ac supply 250 mm sweep,, air circulator, bldc pedestal type, 600 mm sweep, having adjustable height feature, aluminium blades, oscillating feature, suitable for operation in 230v ac supply., 400mm sweep wall fan, 5 star rated with 3 nos. of plastic blade having pull cord control feature & vertical adjustable tilt mechanism, oscillation feature, copper winding motor suitable for operation in 230v ac supply, supply of 2-inch size ball type foot valve, made of heavy-duty ci body with ss strainer and rubber/epdm sealing, suitable for water application, supply of 2-inch (dn50) inline digital water flow meter, suitable for measurement of potable water and sewage water flow, complete with sensor, transmitter, and all necessary accessories, as required., supply of 4-inch inline water flow meter (electromagnetic type), suitable for bulk water measurement, supply of 2-inch flow meter suitable for sewage treatment plant (stp) applications, preferably electromagnetic type, corrosion-resistant, with digital indicator, ip68 protection (sensor), complete with cables and accessories. make- frehing, fmf 2040 series, size- 80mm, supply of smc (sheet moulded compound) junction box of size 300 x 200 x 105 mm, suitable for outdoor pole mounting in street lighting applications, made of high-strength frp or smc material, weatherproof, uv resistant, fire retardant (ul94 v 0), with hinged door (right side), complete with gasket, locking arrangement, and provision for cable entry, suitable for 3-phase or 4-core systems, as per sintex model gsjb 3020(1) or approved equivalent, including all accessories required for proper installation., supply of 12 kv, 3.15 a hrc cartridge fuse (pt fuse) conforming to iec 60282 1, suitable for ht panels, item. pt fuse 11kv 3.15a 12abcna 3.15a bussman (set of 3 nos for r y b phases)., supply of portable high-pressure water jet cleaning system suitable for solar pv module cleaning, comprising motorized pressure pump power- 1800w, pressure- 120 bar, flow rate- 6l per min, voltage- 220v, 50hz, spray gun, high-pressure hose, and necessary accessories., supply of solar photovoltaic (pv) modules of capacity 335 wp, based on crystalline silicon technology with multi-crystalline cells, having a rated power output of 335 wp (plus or minus 2 percenet). the module dimensions shall be approximately 1958 mm x 987 mm, with a weight of around 21.2 kg.m make- renewsys india pvt ltd, model. deserv 3m6h 335 or equivalent, conforming to relevant iec standards (iec 61215 or iec 61730), complete in all respects as per specifications and as directed by the engineer-in-charge., supply of portable digital lux level meter suitable for measurement of illumination levels in lux (lx) and foot-candle (fc), for indoor and outdoor lighting assessment applications. the instrument shall have a measuring range up to at least 200,000 lux with high accuracy of plus or minus 3 percenet or better, and shall be suitable for measurement of light from various sources such as led, fluorescent, metal halide, high-pressure sodium, and incandescent lamps. make- fluke, model- fluke 941 light meter, supply of auto day/night on & off photocell, ldr sensor switch for lighting, water proof, suitable for outdoor usage, 230 v ac, 10a supply complete as required. - make - geltech model- gt-ld308 or equialant., supply of led landing h light suitable to replace existing landing h lights operated at 230v 50hz direct input supply. the fitting housing meets ip-66 dust & moisture proof. designed in accordance with icao aerodrome standards-aerodrome design & operators manual for landing direction indicator landing-t lamp advisory with bas fixing pipe flange. light output colour - white., catalog code- ltl-5w-ui, supply of 200w 6.6a bi-pin halogen lamps. (cat no. 64386 osram or equivalent) as required., supply of single phase preventer (phase failure relay) suitable for protection of 3-phase motors against single phasing, phase reversal, and voltage imbalance. the relay shall operate on 415 v ac, 3-phase, 50 hz supply and shall have built-in phase sequence correction and automatic reset feature. make- selec, model- sppa2m2, supply of 50mm dia dwc hdpe pipe isi marked, acb mechanical interlock set l&t make omega model, suitable exisitng panel, supply of digital hour meter (time totaliser), model ltc9a of selec or approved make list of aai, having 7 and half digit lcd display, suitable for cumulative time measurement with voltage or contact input (24 to 260v ac or dc), panel mounting type, battery powered with memory retention, measuring range up to 199999.99 hours, accuracy plus or minus 0.05 percent, with front or reset facility, complete as required.
Agency / Dept :
airports authority of india AAI
Due Date :
Aug 28, 2026
Tender Value :
49.71L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15603949
Location : gandevi , gujarat
Source : GEM Tenders
corrigendum tender for bi facial solar panel 550 watt , topcon solar panel 610 watt , cut section of gate valve,globe valve,ball valve,diapharm valve,needle valve,check valve,safety valve,butterfly valve,pnematic control valve 4 inch diameter , cut section of centrifugal pump,gear pump,multistage c f pump,reciprocating pump,screw pump , cut section of shell and tube heat exchanger acrylic material , cut section of reactor with accessories motor,agitatot,support leg,nozzle,manhole,baffels,thermo well,bottom valve , gauge manifold with gauges different size of hoses for r134a,r22,r32 and r 410 , wash bag cover jacket for ac service indore 1 point 5 ton,2 point 5 ton capacity , safety belt, industrial type full body protection double rope double hook,100 kg human weight , embroidery machine , brake test arrangement with two spring balance 0 to 25 kg rating , automatic motor coil winding machine with step arbor , three phase variable auto transformer ac varic 3 phase , 0 to 440v, 25a, 50 hz , synchronous motor, with accessories , vfd ac drive ac motor drive with vvvf control 3 phase , single phase transformer, core type, air cooled,1 kva,240 or 415 v,50hz , stepper motor with digital controller , bipolar , 12v dc , input pulse 5v, step angle 1 point 8 , power supply 230 v ac , oprating condition 0 to 40 deg c , bldc motor fan with controller 40 watt , servo motor with contoller 300rpm,12v dc,6mm dia and 15mm legth shaft ,holding torque 30kg cm,no load current 0 point 8 amp,full load current 7 point 5 amp , electrical test bench integrated with 0 to270v ac variac 25a, ppp boq1, bi facial solar panel 550 watt,efficiency 21.3 percentage,dimension 2285mm x 1134mm x 35 mm,anodized aluminumsilver frame,connector mc4 ev02,maximum system voltage 1500v dc, topcon solar panel 610 watt,efficiency 22 point 6 percent to 22 point 9 percent,n type topcon,dimension 2382x1134x30 mm,2 mm dual glass,maximum system voltage 1500v dc, cut section of gate valve,globe valve,ball valve,diapharm valve,needle valve,check valve,safety valve,butterfly valve,pnematic control valve 4 inch diameter, cut section of centrifugal pump,gear pump,multistage c f pump,reciprocating pump,screw pump, cut section of shell and tube heat exchanger acrylic material, cut section of reactor with accessories motor,agitatot,support leg,nozzle,manhole,baffels,thermo well,bottom valve, gauge manifold with gauges different size of hoses for r134a,r22,r32 and r 410, wash bag cover jacket for ac service indore 1 point 5 ton,2 point 5 ton capacity, safety belt, industrial type full body protection double rope double hook,100 kg human weight, embroidery machine highlighted upper and lower tread sensors,auto adjustable tread tension,automaticneedle treader embroidery designs 227,lcd display included usb cable,embroidery erea 300 x 200 mm,maximum speed 1050 stitch per mi, brake test arrangement with two spring balance 0 to 25 kg rating with flat belt with 3 pullies having inner diameter 17 mm,23mm, 29mm and width of 2 inch, automatic motor coil winding machine with step arbor, three phase variable auto transformer ac varic 3 phase , 0 to 440v, 25a, 50 hz, synchronous motor, with accessories like starter, excitation arrangements,3 phase, 3hp, 440 v, 50hz, 4 pole ac voltmeter, dc voltmeter , ac ameter , dc ameter , watt meter panel with desk and drawer lock key panel total height 170 cm , width 75 cm, horizontal desk size 40 cm,drawer size 33cm x 12 cm 2 drawers,component fitting area at top 120 cm x 60 cm, vfd ac drive ac motor drive with vvvf control 3 phase, 7 point 5 hp panel with desk & drawer lock key panel total height 170 cm,width 75 cm, horizontal desk size 40 cm,drawer size 33cm x 12 cm 2 drawers , component fitting area at top 120 cm x 60 cm, single phase transformer, core type, air cooled,1 kva,240 or 415 v,50hz, stepper motor with digital controller , bipolar , 12v dc , input pulse 5v, step angle 1 point 8 , power supply 230 v ac , oprating condition 0 to 40 deg c, bldc motor fan with controller 40 watt, servo motor with contoller 300rpm,12v dc,6mm dia and 15mm legth shaft ,holding torque 30kg cm,no load current 0 point 8 amp,full load current 7 point 5 amp, electrical test bench integrated with 0 to270v ac variac 25a 01 no, dc variac 0 to 270v dc 25a 01 no, dc ameter 0 to 25a 03 nos , dc voltmeter 0 to 750 volt 03 nos, ac ammeter 0 to 25 a 03 nos, ac voltmeter 0 to 750v03 nos,1 phase power factor meter01 no ,3 phase power factor meter01 no, frequency meter 45 to 55 hz 01 no, watt meter 0 to 3000w02 nos,1 phase energy meter01 no, 3 phase energy meter01 no all equipments with seperate contact terminals and all meters are digital
Agency / Dept :
department of employment and training DET
Due Date :
Jun 04, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15672376
Location : gandevi , gujarat
Source : GEM Tenders
corrigendum tender for bi facial solar panel 550 watt , topcon solar panel 610 watt , cut section of gate valve,globe valve,ball valve,diapharm valve,needle valve,check valve,safety valve,butterfly valve,pnematic control valve 4 inch diameter , cut section of centrifugal pump,gear pump,multistage c f pump,reciprocating pump,screw pump , cut section of shell and tube heat exchanger acrylic material , cut section of reactor with accessories motor,agitatot,support leg,nozzle,manhole,baffels,thermo well,bottom valve , gauge manifold with gauges different size of hoses for r134a,r22,r32 and r 410 , wash bag cover jacket for ac service indore 1 point 5 ton,2 point 5 ton capacity , safety belt, industrial type full body protection double rope double hook,100 kg human weight , embroidery machine , brake test arrangement with two spring balance 0 to 25 kg rating , automatic motor coil winding machine with step arbor , three phase variable auto transformer ac varic 3 phase , 0 to 440v, 25a, 50 hz , synchronous motor, with accessories , vfd ac drive ac motor drive with vvvf control 3 phase , single phase transformer, core type, air cooled,1 kva,240 or 415 v,50hz , stepper motor with digital controller , bipolar , 12v dc , input pulse 5v, step angle 1 point 8 , power supply 230 v ac , oprating condition 0 to 40 deg c , bldc motor fan with controller 40 watt , servo motor with contoller 300rpm,12v dc,6mm dia and 15mm legth shaft ,holding torque 30kg cm,no load current 0 point 8 amp,full load current 7 point 5 amp , electrical test bench integrated with 0 to270v ac variac 25a, ppp boq1, bi facial solar panel 550 watt,efficiency 21.3 percentage,dimension 2285mm x 1134mm x 35 mm,anodized aluminumsilver frame,connector mc4 ev02,maximum system voltage 1500v dc, topcon solar panel 610 watt,efficiency 22 point 6 percent to 22 point 9 percent,n type topcon,dimension 2382x1134x30 mm,2 mm dual glass,maximum system voltage 1500v dc, cut section of gate valve,globe valve,ball valve,diapharm valve,needle valve,check valve,safety valve,butterfly valve,pnematic control valve 4 inch diameter, cut section of centrifugal pump,gear pump,multistage c f pump,reciprocating pump,screw pump, cut section of shell and tube heat exchanger acrylic material, cut section of reactor with accessories motor,agitatot,support leg,nozzle,manhole,baffels,thermo well,bottom valve, gauge manifold with gauges different size of hoses for r134a,r22,r32 and r 410, wash bag cover jacket for ac service indore 1 point 5 ton,2 point 5 ton capacity, safety belt, industrial type full body protection double rope double hook,100 kg human weight, embroidery machine highlighted upper and lower tread sensors,auto adjustable tread tension,automaticneedle treader embroidery designs 227,lcd display included usb cable,embroidery erea 300 x 200 mm,maximum speed 1050 stitch per mi, brake test arrangement with two spring balance 0 to 25 kg rating with flat belt with 3 pullies having inner diameter 17 mm,23mm, 29mm and width of 2 inch, automatic motor coil winding machine with step arbor, three phase variable auto transformer ac varic 3 phase , 0 to 440v, 25a, 50 hz, synchronous motor, with accessories like starter, excitation arrangements,3 phase, 3hp, 440 v, 50hz, 4 pole ac voltmeter, dc voltmeter , ac ameter , dc ameter , watt meter panel with desk and drawer lock key panel total height 170 cm , width 75 cm, horizontal desk size 40 cm,drawer size 33cm x 12 cm 2 drawers,component fitting area at top 120 cm x 60 cm, vfd ac drive ac motor drive with vvvf control 3 phase, 7 point 5 hp panel with desk & drawer lock key panel total height 170 cm,width 75 cm, horizontal desk size 40 cm,drawer size 33cm x 12 cm 2 drawers , component fitting area at top 120 cm x 60 cm, single phase transformer, core type, air cooled,1 kva,240 or 415 v,50hz, stepper motor with digital controller , bipolar , 12v dc , input pulse 5v, step angle 1 point 8 , power supply 230 v ac , oprating condition 0 to 40 deg c, bldc motor fan with controller 40 watt, servo motor with contoller 300rpm,12v dc,6mm dia and 15mm legth shaft ,holding torque 30kg cm,no load current 0 point 8 amp,full load current 7 point 5 amp, electrical test bench integrated with 0 to270v ac variac 25a 01 no, dc variac 0 to 270v dc 25a 01 no, dc ameter 0 to 25a 03 nos , dc voltmeter 0 to 750 volt 03 nos, ac ammeter 0 to 25 a 03 nos, ac voltmeter 0 to 750v03 nos,1 phase power factor meter01 no ,3 phase power factor meter01 no, frequency meter 45 to 55 hz 01 no, watt meter 0 to 3000w02 nos,1 phase energy meter01 no, 3 phase energy meter01 no all equipments with seperate contact terminals and all meters are digital
Agency / Dept :
department of employment and training DET
Due Date :
Jun 08, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16499728
Location : raipur , chhattisgarh
Source : GEM Tenders
tender for engineering power tools combination pliers 200 mm , nose plier 200 mm , side cutting pliers 200 mm , portable high pressure washer, 160 bar pressure , ac cleaning cover , industrial infrared ir thermometer , pipe cutter , heavy duty steel flaring tools kit , swage tool kit tube pipe expander , crimping tool , wire stripping and cutting tool 200 mm , double ended spanner sets , ring spanner sets , sledge hammer 500 gm , tester , insulated screw drivers , insulated screw drivers heavy duty , t-handle allen key set , allen key set , socket set , t spanner 10 mm , t spanner 11 mm , t spanner 12 mm , t spanner 13 mm , t spanner 14 mm , t spanner 17 mm , hacksaw ss frame , high carbon steel hacksaw blade , right angled hammer drill machine heavy duty , hammer drill bit- 4 mm , hammer drill bit- 6 mm , hammer drill bit- 16 mm , hammer drill bit- 20 mm , hammer drill bit- 8mm , hammer drill bit- 10mm , hammer drill bit- 12mm , spring tube bender , gauge manifold , charge line , refrigerant cylinder, 10 kg , grinder machine- heavy duty , grinder wheel , cutting wheel , clamp meter , measuring tape 5m , measuring tape 50m , 24w torch light zoomable , spirit level, 12 inch , tool kit bag , hdpe nape type safety helmet with chin strap 600 mm , vacuum pump, 2 stage , hand gloves , handheld instant start 620 watt , gumboot steel toe fire safety. , sling psychrometer , temperature and humidity data logger , anemometer , tube bender , file tool , adjustable spanner 8 inch , adjustable spanner 10 inch , chisel or chheni, size- minimum 400 mm , tool centre concrete cutter , brazing torch , rachit wrench , safety belt , safety shoes , rotary hammer sds plus , demolition hammer , circular saw , planer machine , 5 kg chipping hammer , manual grouting machine , laser measure, combination pliers 200 mm 1000 volt rated handle, safe live wire working handle tested up to 10000 volts, conform to current norms bi-material grip for comfort finger guard for better control and added user safety confirm to din standard en 60900, ice/cei 900 vde 0681 warranty life time (as per oem), nose plier 200 mm 1000 volt rated handle, safe live wire working handle tested up to 10000 volts, conform to current norms bi-material grip for comfort finger guard for better control and added user safety confirm to din standard en 60900, ice/cei 900 vde 0681 warranty life time (as per oem), side cutting pliers 200 mm 1000 volt rated handle, safe live wire working handle tested up to 10000 volts, conform to current norms bi-material grip for comfort finger guard for better control and added user safety confirm to din standard en 60900, ice/cei 900 vde 0681 warranty life time (as per oem), portable high pressure moter power - 2400 w maximum pressure - 160 bar maximum flow rate - 520 l/ h hose lenth - 8 m pump system - wobble plate product weight - 23 kg voltage/ frequency - 220-240v & 50hz warranty 6 months, ac cleaning cover warranty 6 months, industrial infrared ir thermometer warranty 1 year, pipe cutter warranty life time (as per oem), heavy duty steel flaring tools kit warranty 12 months, swage tool kit tube pipe expander warranty 12 months, crimping tool (1.5 - 16 mm capacity) warranty 12 months, wire stripping & cutting tool 200 mm warranty life time (as per oem), double ended spanner sets (sizes- 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22) warranty life time (as per oem), ring spanner sets (sizes- 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22) warranty life time (as per oem), sledge hammer 500 gm warranty life time (as per oem), tester (line) 130 mm warranty 12 months, insulated screw drivers (two-in-one) size- 225 mm warranty life time (as per oem), insulated screw drivers heavy duty size- 305 mm warranty life time (as per oem), t-handle allen key set (sizes- 9 pcs. set (1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm,10mm) black finish warranty life time (as per oem), allen key set (sizes- 9 pcs. set (1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm,10mm) black finish warranty life time (as per oem), socket set, 1/2inch square drive 8-32mm warranty life time (as per oem), t spanner 10 mm, t spanner 11 mm, t spanner 12 mm, t spanner 13 mm, t spanner 14 mm, t spanner 17 mm, hacksaw ss frame 12inch warranty 12 months, high carbon steel hacksaw blade 12indh warranty 12 months, right angled hammer drill machine heavy duty rated input power- 850 w impact energy- 3.2 j drilling dia. concrete, hammer drill bits- 4-28 mm warranty 6 months, hammer drill bit- 4 mm warranty life time (as per oem), hammer drill bit- 6 mm warranty life time (as per oem), hammer drill bit- 16 mm warranty life time (as per oem), hammer drill bit- 20 mm warranty life time (as per oem), hammer drill bit- 8mm warranty life time (as per oem), hammer drill bit- 10mm warranty life time (as per oem), hammer drill bit- 12mm warranty life time (as per oem), spring tube bender- 1/4inch warranty 6 months, spring tube bender- 5/16inch warranty 6 months, spring tube bender- 3/8inch warranty 6 months, spring tube bender- 1/2inch warranty 6 months, spring tube bender- 5/8inch warranty 6 months, gauge manifold (pressure & compound gauge) warranty 6 months, charge line (2500 psi, 5000 psi), refrigerant cylinder, 10 kg isi certified quality certificate required, grinder machine- heavy duty power input - 900 w disc diameter - 100 mm no- load speed - 11,000 rpm spindle diameter - m10 weight. - 1.9 kg warranty 1 year, grinder wheel, cutting wheel, clamp meter warranty 2 years quality certificate required, measuring tape 5m, measuring tape 50m, 24w torch light zoomable, 2000mah handheld flashlight rechargeable and stepless dimming, 1000 lumens, 900m coverage, portable led flash light warranty 1 year, spirit level, 12 inch, tool kit bag lenth - 550 mm width - 350 mm height - 350 mm warranty 6 months, hdpe nape type safety helmet with chin strap 600 mm is 2925 & en 397 blue color warranty 12 months, vacuum pump, 2 stage warranty 1 year as per specifications, hand gloves, handheld instant start 620 watt, anti vibration system and an airflow of 3.2to3.5m3/min air blower made with polyamide material. warranty 1 year, gumboot steel toe fire safety. (standard steel safety shoes, anti slip, waterpoof, breathable printed leather shoes, puncture and tear resistant, for industrial use) material type alloy steel, leather heel type flat closure type slip-on toe style round toe is 15298 (part 2) 2011 iso 20345 2004 warranty 1 year, sling psychrometer warranty 12 months, temperature & humidity data logger warranty 1 year quality certificate required, anemometer warranty 1 year quality certificate required, tube bender (lever type) 1/2inch, tube bender (lever type) 5/8inch, file tool (mill file), adjustable spanner 8inch, adjustable spanner 10inch, chisel (chheni), size- minimum 400 mm, tool centre concrete cutter warranty 06 months, brazing torch, rachit wrench, safety belt, safety shoes warranty 1 year, rotary hammer ssd plus power input - 790 w impact energy - 2.7 j drilling capacity - 24 mm max. drilling diameter in (metal/wood/concrete) 13/30/24 mm no- load speed - 1300 rpm impact rate - 4200 bpm weight. - 2.8 kg warranty 1 year, demolition hammer power input - 1750 w impact rate - 1300 bpm impact energy - 41 j weight - 16 kg tool holder - 30 mm hex warranty 1 year, circular saw power input - 2050 w no-load speed 0-5, 300 rpm saw blade bore. 25 mm saw blade diameter - 235 mm cutting depth (90degree) 85mm cutting depth (45degree) 65mm warranty 1 year, planer machine power input - 650 w no load speed - 16,500 rpm planing widths - 82 mm max cutting depth - 2.6 weight - 3 kg warranty 1 year, 5 kg chipping hammer impact rate at rated speed - 2850 bpm input power - 1100 w impact energy - 7.5 j weight - 5.6 kg tool holder - ssd max warranty 1 year, manual grouting machine, laser measure (as per attached specificaiton sheet)
Agency / Dept :
all india institute of medical sciences AIIMS
Due Date :
Aug 18, 2026
Tender Value :
16L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16499797
Location : dhanbad , jharkhand
Source : GEM Tenders
tender for procurement of medical equipments ultrasonic therapy unit , tens 8 channel , tens 4 channel , hand wave diathermy , short wave diathermy , dental x- ray iop or opg x-ray viewer with led light , operating microscope , otoscope , syringe pump , transcutaneous bilirubinometer , bubble cpap with compressor , radiant warmer , infusion pump , multi para monitor with leads , abg , hemo dialysis , multi para monitors , suction machine , defibrillator , medical monitor with stand , medicine general items ro water plant - lph2000ltr, procurement of medical equipments, dual frequency (1mhz and 3mhz), output power up to 2.5 w/cm2, continuous and pulsed modes, microprocessor-based timer with lcd display, water-protected transducer head., 8-channel independent intensity control, pulse frequency range 2hz-150hz, multiple waveforms (burst, continuous, pwm), digital display for time and intensity., 4-channel independent control, microprocessor-based circuitry, adjustable pulse width (50-300 microseconds), battery and mains operated with safety cutoff., shortwave frequency 27.12 mhz, continuous/pulsed modes, output power 250w-500w, automatic tuning, air-spaced glass electrodes or rubber pads., heavy-duty 500w output, 27.12 mhz, disc and pad electrodes included, digital timer with automatic termination, cooling fan for internal circuitry., an ultra-thin, led-illuminated viewing screen specifically dimensioned to hold and backlight small intraoral periapical iop or panoramic orthopantomogram opg dental x-ray films., a binocular surgical microscope featuring led coaxial illumination to maintain a strong red reflex during eye surgeries. it includes a manual 3-step magnification system (usually 4x, 10x, and 16x) mounted on a stable, mobile floor stand., a durable, pocket-sized diagnostic tool for ear examinations. uses fiber-optic technology to project cool led light without reflections and features a 3x magnification viewing window., a highly precise volumetric infusion pump. it mechanically drives standard 10ml, 20ml, 30ml, or 50ml syringes to deliver micro-infusions of potent medications at exact rates (often down to 0.1 ml/hr). features strict occlusion pressure alarms to prevent blockages., a handheld, non-invasive diagnostic tool. it uses led light reflection to measure bilirubin levels directly through the infants skin (usually on the sternum or forehead), which spares the baby from the pain of constant heel-prick blood draws., continuous positive airway pressure system used for premature infants in respiratory distress. it is electrically powered and mixes heated, humidified air and oxygen, using an underwater bubble generator to create gentle, continuous pressure that keeps the infants tiny lung sacs open., microprocessor control, quartz infrared heater, skin and manual modes, 360degree-rotation of heater head, alarm system., a volumetric pump compatible with standard iv sets. delivers fluids at highly precise flow rates ranging from 0.1 ml/hr to 1200 ml/hr. features ultrasonic air-in-line detection, occlusion pressure sensors, and a keep vein open (kvo) function., a high-acuity patient monitor featuring a large 15-inch color display. it continuously tracks five essential parameters, ecg, spo2, non-invasive blood pressure (nibp), and temperature. it is specifically programmed to be neonatal-compatible, meaning it can process the rapid heart rates of infants without triggering false alarms., the epoc blood analysis system. a portable, point-of-care device that uses specialized test cards to measure blood gases, electrolytes, and metabolites in under a minute directly at the bedside., single/double pump, online clearance monitoring, blood leak detector, ultrafiltration control, 5/7 para (ecg, spo2, nibp, resp, temp), 12.1 inch tft display, 720h data storage, dual 2.5l jars, oil-free piston pump, high vacuum (600+ mmhg), 20-45 lpm flow, biphasic technology, aed & manual modes, integrated ecg monitor, 200j-360j energy range, compatible with 5ml-60ml syringes, flow rate 0.1-1500 ml/hr, bolus function, kvo mode, medical grade full hd monitor minimum 24-32 inch, anti-glare display, dvi/hdmi input, high brightness and contrast ratio, movable monitor stand with locking wheels., 5 stage filtration ss-304 skid high pressure pump digital conductivity meter
Agency / Dept :
department of revenue registration and land reforms
Due Date :
Aug 17, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16830320
Location : dhanbad , jharkhand
Source : GEM Tenders
corrigendum tender for ultrasonic therapy unit , tens 8 channel , tens 4 channel , hand wave diathermy , short wave diathermy , dental x- ray iop or opg x-ray viewer with led light , operating microscope , otoscope , syringe pump , transcutaneous bilirubinometer , bubble cpap with compressor , radiant warmer , infusion pump , multi para monitor with leads , abg , hemo dialysis , multi para monitors , suction machine , defibrillator , medical monitor with stand , medicine general items ro water plant - lph2000ltr, procurement of medical equipments, dual frequency (1mhz and 3mhz), output power up to 2.5 w/cm2, continuous and pulsed modes, microprocessor-based timer with lcd display, water-protected transducer head., 8-channel independent intensity control, pulse frequency range 2hz-150hz, multiple waveforms (burst, continuous, pwm), digital display for time and intensity., 4-channel independent control, microprocessor-based circuitry, adjustable pulse width (50-300 microseconds), battery and mains operated with safety cutoff., shortwave frequency 27.12 mhz, continuous/pulsed modes, output power 250w-500w, automatic tuning, air-spaced glass electrodes or rubber pads., heavy-duty 500w output, 27.12 mhz, disc and pad electrodes included, digital timer with automatic termination, cooling fan for internal circuitry., an ultra-thin, led-illuminated viewing screen specifically dimensioned to hold and backlight small intraoral periapical iop or panoramic orthopantomogram opg dental x-ray films., a binocular surgical microscope featuring led coaxial illumination to maintain a strong red reflex during eye surgeries. it includes a manual 3-step magnification system (usually 4x, 10x, and 16x) mounted on a stable, mobile floor stand., a durable, pocket-sized diagnostic tool for ear examinations. uses fiber-optic technology to project cool led light without reflections and features a 3x magnification viewing window., a highly precise volumetric infusion pump. it mechanically drives standard 10ml, 20ml, 30ml, or 50ml syringes to deliver micro-infusions of potent medications at exact rates (often down to 0.1 ml/hr). features strict occlusion pressure alarms to prevent blockages., a handheld, non-invasive diagnostic tool. it uses led light reflection to measure bilirubin levels directly through the infants skin (usually on the sternum or forehead), which spares the baby from the pain of constant heel-prick blood draws., continuous positive airway pressure system used for premature infants in respiratory distress. it is electrically powered and mixes heated, humidified air and oxygen, using an underwater bubble generator to create gentle, continuous pressure that keeps the infants tiny lung sacs open., microprocessor control, quartz infrared heater, skin and manual modes, 360degree-rotation of heater head, alarm system., a volumetric pump compatible with standard iv sets. delivers fluids at highly precise flow rates ranging from 0.1 ml/hr to 1200 ml/hr. features ultrasonic air-in-line detection, occlusion pressure sensors, and a keep vein open (kvo) function., a high-acuity patient monitor featuring a large 15-inch color display. it continuously tracks five essential parameters, ecg, spo2, non-invasive blood pressure (nibp), and temperature. it is specifically programmed to be neonatal-compatible, meaning it can process the rapid heart rates of infants without triggering false alarms., the epoc blood analysis system. a portable, point-of-care device that uses specialized test cards to measure blood gases, electrolytes, and metabolites in under a minute directly at the bedside., single/double pump, online clearance monitoring, blood leak detector, ultrafiltration control, 5/7 para (ecg, spo2, nibp, resp, temp), 12.1 inch tft display, 720h data storage, dual 2.5l jars, oil-free piston pump, high vacuum (600+ mmhg), 20-45 lpm flow, biphasic technology, aed & manual modes, integrated ecg monitor, 200j-360j energy range, compatible with 5ml-60ml syringes, flow rate 0.1-1500 ml/hr, bolus function, kvo mode, medical grade full hd monitor minimum 24-32 inch, anti-glare display, dvi/hdmi input, high brightness and contrast ratio, movable monitor stand with locking wheels., 5 stage filtration ss-304 skid high pressure pump digital conductivity meter
Agency / Dept :
department of revenue registration and land reforms
Due Date :
Aug 20, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16193618
Location : bareilly , uttar pradesh
Source : GEM Tenders
tender for general tool kit with tool box , mechanical creeper , allen key set , ratchet set 46 pcs , impact wrench , cordless drill machine , tool kit drill machine for drone, reqmt of tool and test eqpt, 1 x 150mm adjustable wrench, 1 x 150mm mini hacksaw, 1 x 150mm side cutters, 1 x 175mm combination pliers, 1 x 18mm utility knife, 1 x 200mm wire striper, 1 x 230mm torpedo level, 1 x 250mm water pump pliers, 1 x 3 oblique 8 x 1.1 oblique 4 adaptor, 1 x 3 oblique 8 inch ratchet handle 72 tooth, 1 x 3m tape measure, 1 x 75mm 3 oblique 8 inch square drive extension bar, 1 x 8oz bs876 claw hammer, 1 x spark plug sockets 16mm, 1 x ratchet screwdriver bit driver, 1.1 oblique 4 hex x 1.1 oblique 4 square driver adaptor, 10 x 1.1 oblique 4 inch hex 50mm crv screwdriver bits - sl 4, sl5, sl6, sl7 ph1, ph2, ph3 pz1, pz2, pz3, 10 x 3 oblique 8 inch sockets - 9, 10, 11, 12, 13, 14, 15, 16, 17, 19mm, 10 x knife blades, 11 x metric hex keys - 1.27, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6mm, 13 x 1.1 oblique 4 inch sockets - 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm, 1x 1.1oblique 4 inch 60mm magnetic bit holder, 2 x 2 inch spring clamps, 2 x 3inch spring clamps, 2 x cross slot - ph1 x 75mm, ph2x38mm, 2 x plain slot - 1.5x50mm, 2x50mm, 2 x plain slot - 5x75mm, 6x38mm, 20 x 1.1 oblique 4 inch hex 25mm crv screwdriver bits - ph0, ph1, ph2, ph3, pz1, pz2, pz3, h3, h4, h5, h6, sl4, t8, t10, t15, t20, t25, t27, t30, 28 x 150mm cable ties, 3 x cross slot - ph000x50mm, ph00x50mm, ph0x50mm, 4 x screwdrivers-, 5 x precision screwdriver -, 6 x combination spanners - 8, 10, 12, 13, 14, 17mm, all size of spanner open jaw, and ring double ended, hammer, metallic hammer, chisel, all size combination spanner, all size screw driver , cutting pliers of each set, all size of half open jaw and ring, size - 40 inch length and max capacity of mechanic creeper middle part 250lbs, frame material - mild steel, seat material - foam seat, surface finish- powder coating, movement - pu caster wheel-hard standing wheel, color-silver, finish types- polished, head style- hex, item length- 9.45 inches, item weight- 1026 grams, material type- chrome vanadium steel, measurement standard- metric, sae, set name- 27-piece hex key set, complete 27-piece allen key set- includes metric 1.5mm-10mm and sae . one set covers everything from small toys to large machinery, cr-v steel construction- made from heat-treated chrome vanadium steel for strength, durability, and rust resistance .this hex key set won not strip or snap under pressure, sizes include- t6,t7,t8,t9,t10,t15,t20,t25,t27, flowers hex- oblique with t10, t15 , t20 , t25, t30 , t40 inner flat head hex- oblique with h3, h4 , h5 , h6 , h7 , h8 a word- oblique each sl4 , sl5.5 , sl7 cross- oblique each ph1, ph2 , ph3 m word- oblique each pz1 , pz2, pz3 13-1,4 inches dr sockets- 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14mm 3-hex key wrenches- oblique each 1.5,2.0,2.5mm 1-1 and 4 dr universal joint 1-1 oblique 4 inch x inch extension bar 1-1 oblique 4 x4 extension bar 1-1 oblique 4 x6 flexible extension 1-1 oblique 4 dr sliding t bar 1-1 oblique 4 inch quick ratchet handle 1- inch spinner handle 1-bit adaptor 1- blow case, flowers hex- oblique each t10, t15, t20, t25, t30, t40 inner flat head hex- oblique each h3 , h4 , h5 h6, h7, h8 a word- sl4 oblique sl5.5 oblique sl7 cross- ph1 oblique ph2 oblique ph3 m word- pz1 oblique pz2 oblique pz3 13-1 oblique 4 dr sockets- 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14mm 3-hex key wrenches- 1.5 oblique 2.0 oblique 2.5mm 1-1 oblique 4 inch dr universal joint 1-1 oblique 4 x2 extension bar 1-1 oblique 4 x4 extension bar 1-1 oblique 4 x6 flexible extension 1-1 oblique 4 inch dr sliding t bar 1-1 oblique 4 quick ratchet handle 1-6 spinner handle 1-bit adaptor 1- blow case, material- metal, item length- 14.7 centimetres, reverse rotation auto stop mode stops rotation and impact in 0.2 seconds when fastener is loosened adequately to prevent bolt oblique nut get lost. bl motor delivers 280 nm of max torque, bl motor should be electronically controlled to optimize battery energy use for up to 50 percent longer run time per charge. bl motor eliminates carbon brushes, enabling the bl motor to run cooler and more efficiently for longer life. 1 x dtw285 impact wrench, 2 x bl1830b 18v 3.0ah battery, 1 x dc18rc 18v rapid charger,01 x carrying case, power source- battery powered, maximum rotational speed- 2800 rpm, voltage- 18 volts, maximum torque- 285 newton meters, number of speeds-02, speed- 2800 rpm, torque- 285 newton meters, drill type- impact driver- battery capacity- 18 amp hours, 2 x 5.0ah batteries, voltage- 110v power- 500w frequency- 50-60hz speed- 8000-31000rpm attachment range- 0.6-6.5mm package content- 1x power grinder 1x arbor wrench 2x carbon brushes 35 practical accessories
Agency / Dept :
indian army
Due Date :
Jul 11, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16010189
Location : bareilly , uttar pradesh
Source : GEM Tenders
tender for general tool kit with tool box , mechanical creeper , allen key set , ratchet set 46 pcs , impact wrench , cordless drill machine , tool kit drill machine for drone, reqmt of tool and test eqpt, 1 x 150mm adjustable wrench, 1 x 150mm mini hacksaw, 1 x 150mm side cutters, 1 x 175mm combination pliers, 1 x 18mm utility knife, 1 x 200mm wire striper, 1 x 230mm torpedo level, 1 x 250mm water pump pliers, 1 x 3 oblique 8 x 1.1 oblique 4 adaptor, 1 x 3 oblique 8 inch ratchet handle 72 tooth, 1 x 3m tape measure, 1 x 75mm 3 oblique 8 inch square drive extension bar, 1 x 8oz bs876 claw hammer, 1 x spark plug sockets 16mm, 1 x ratchet screwdriver bit driver, 1.1 oblique 4 hex x 1.1 oblique 4 square driver adaptor, 10 x 1.1 oblique 4 inch hex 50mm crv screwdriver bits - sl 4, sl5, sl6, sl7 ph1, ph2, ph3 pz1, pz2, pz3, 10 x 3 oblique 8 inch sockets - 9, 10, 11, 12, 13, 14, 15, 16, 17, 19mm, 10 x knife blades, 11 x metric hex keys - 1.27, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6mm, 13 x 1.1 oblique 4 inch sockets - 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm, 1x 1.1oblique 4 inch 60mm magnetic bit holder, 2 x 2 inch spring clamps, 2 x 3inch spring clamps, 2 x cross slot - ph1 x 75mm, ph2x38mm, 2 x plain slot - 1.5x50mm, 2x50mm, 2 x plain slot - 5x75mm, 6x38mm, 20 x 1.1 oblique 4 inch hex 25mm crv screwdriver bits - ph0, ph1, ph2, ph3, pz1, pz2, pz3, h3, h4, h5, h6, sl4, t8, t10, t15, t20, t25, t27, t30, 28 x 150mm cable ties, 3 x cross slot - ph000x50mm, ph00x50mm, ph0x50mm, 4 x screwdrivers-, 5 x precision screwdriver -, 6 x combination spanners - 8, 10, 12, 13, 14, 17mm, all size of spanner open jaw, and ring double ended, hammer, metallic hammer, chisel, all size combination spanner, all size screw driver , cutting pliers of each set, all size of half open jaw and ring, size - 40 inch length and max capacity of mechanic creeper middle part 250lbs, frame material - mild steel, seat material - foam seat, surface finish- powder coating, movement - pu caster wheel-hard standing wheel, color-silver, finish types- polished, head style- hex, item length- 9.45 inches, item weight- 1026 grams, material type- chrome vanadium steel, measurement standard- metric, sae, set name- 27-piece hex key set, complete 27-piece allen key set- includes metric 1.5mm-10mm and sae . one set covers everything from small toys to large machinery, cr-v steel construction- made from heat-treated chrome vanadium steel for strength, durability, and rust resistance .this hex key set won not strip or snap under pressure, sizes include- t6,t7,t8,t9,t10,t15,t20,t25,t27, flowers hex- oblique with t10, t15 , t20 , t25, t30 , t40 inner flat head hex- oblique with h3, h4 , h5 , h6 , h7 , h8 a word- oblique each sl4 , sl5.5 , sl7 cross- oblique each ph1, ph2 , ph3 m word- oblique each pz1 , pz2, pz3 13-1,4 inches dr sockets- 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14mm 3-hex key wrenches- oblique each 1.5,2.0,2.5mm 1-1 and 4 dr universal joint 1-1 oblique 4 inch x inch extension bar 1-1 oblique 4 x4 extension bar 1-1 oblique 4 x6 flexible extension 1-1 oblique 4 dr sliding t bar 1-1 oblique 4 inch quick ratchet handle 1- inch spinner handle 1-bit adaptor 1- blow case, flowers hex- oblique each t10, t15, t20, t25, t30, t40 inner flat head hex- oblique each h3 , h4 , h5 h6, h7, h8 a word- sl4 oblique sl5.5 oblique sl7 cross- ph1 oblique ph2 oblique ph3 m word- pz1 oblique pz2 oblique pz3 13-1 oblique 4 dr sockets- 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14mm 3-hex key wrenches- 1.5 oblique 2.0 oblique 2.5mm 1-1 oblique 4 inch dr universal joint 1-1 oblique 4 x2 extension bar 1-1 oblique 4 x4 extension bar 1-1 oblique 4 x6 flexible extension 1-1 oblique 4 inch dr sliding t bar 1-1 oblique 4 quick ratchet handle 1-6 spinner handle 1-bit adaptor 1- blow case, material- metal, item length- 14.7 centimetres, reverse rotation auto stop mode stops rotation and impact in 0.2 seconds when fastener is loosened adequately to prevent bolt oblique nut get lost. bl motor delivers 280 nm of max torque, bl motor should be electronically controlled to optimize battery energy use for up to 50 percent longer run time per charge. bl motor eliminates carbon brushes, enabling the bl motor to run cooler and more efficiently for longer life. 1 x dtw285 impact wrench, 2 x bl1830b 18v 3.0ah battery, 1 x dc18rc 18v rapid charger,01 x carrying case, power source- battery powered, maximum rotational speed- 2800 rpm, voltage- 18 volts, maximum torque- 285 newton meters, number of speeds-02, speed- 2800 rpm, torque- 285 newton meters, drill type- impact driver- battery capacity- 18 amp hours, 2 x 5.0ah batteries, voltage- 110v power- 500w frequency- 50-60hz speed- 8000-31000rpm attachment range- 0.6-6.5mm package content- 1x power grinder 1x arbor wrench 2x carbon brushes 35 practical accessories
Agency / Dept :
indian army
Due Date :
Jul 07, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Adjustable Frequency Drive. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Adjustable Frequency Drive sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Adjustable Frequency Drive Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Adjustable Frequency Drive, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Adjustable Frequency Drive Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Adjustable Frequency Drive Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Adjustable Frequency Drive.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Adjustable Frequency Drive depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Adjustable Frequency Drive Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Adjustable Frequency Drive bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Adjustable Frequency Drive. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Adjustable Frequency Drive, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Adjustable Frequency Drive, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Adjustable Frequency Drive?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Adjustable Frequency Drive tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Adjustable Frequency Drive?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Adjustable Frequency Drive, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Adjustable Frequency Drive is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All