sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

5Latest Adapter scrap Tenders List

Latest Adapter scrap Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Adapter scrap tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Adapter scrap tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Adapter scrap Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Adapter scrap tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Adapter scrap Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Adapter scrap Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Adapter scrap Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Adapter scrap tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Adapter scrap Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Adapter scrap sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Adapter scrap tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Adapter scrap tenders.

Is EMD mandatory for all Adapter scrap tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Adapter scrap work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Adapter scrap tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Adapter scrap Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16924713
Location : bangarapet , karnataka
auction or scrap of lot no - lot name - used scrap aluminium valves product type - metal category - aluminium pcb group - ferrous and non ferrous metals scraps used / scrap aluminium valves, with / without attachments, etc. in wooden box, excluding box (em) note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - scrap electric motors product type - electrical items category - others pcb group - ferrous and non ferrous metals scraps used / scrap / condemned electric motors with / without attachments, of assorted sizes, with / without copper coils etc., in as is, where is condition (approximately 980 kg) (em) note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - used scrap high percentage nickel chromium charge trays product type - metal category - nickle pcb group - ferrous and non ferrous metals scraps used / scrap high percentage nickel chromium charge trays, etc. excluding pallet (em)note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - used scrap grinding wheels product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps used / scrap grinding wheels, without box/pallet (em)note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - used scrap iso boring bars, attachments product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps used / scrap iso / mt boring bars, attachments etc. (em)note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - used scrap cartridges product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps used / scrap cartridges (em)note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - used scrap broken carbide facing & turning tools product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps used / scrap broken carbide facing & turning tools with ms body (em)note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - used scrap carbon brush with copper lugs product type - metal category - copper pcb group - ferrous and non ferrous metals scraps scrap carbon brushes with copper pigtails (em)note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - used scrap hss tools, spot face cutters, product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps used / scrap hss tools, spot face cutters, etc. (approximately 55 kg) (em)note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - obsolete discarded nipples, adapters, etc product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps obsolete / discarded nipples, adapters, etc., in a pallet, excluding pallet (em)note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - scrap high percentage nickel chromium product type - metal category - nickle pcb group - ferrous and non ferrous metals scraps used / scrap high percentage nickel chromium heating elements / holding rods / tubes etc. (em)note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - used damaged scrap broken saw cutting machine blades product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps used / damaged / scrap / broken saw cutting machine blades, tun | lot no - lot name - used scrap condemned co2 and arc welding machines and parts product type - plant/machineries category - machinery items pcb group - ferrous and non ferrous metals scraps used / scrap / condemned co2 / arc welding machines and parts, etc., 4 mt approximately, in as is, whereis condition (em) note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - used scrap condemned voltage transformers product type - electrical items category - transformer pcb group - ferrous and non ferrous metals scraps used / scrap / condemned transformers - 4nos, aprex, 2.53 mt approximately (em) note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - end bits of steel rods and pipes product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps end bits of steel rods and pipes in assorted sizes, in 8 pallets, without pallets (em)note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - salvaged condemned beml equipment be220 product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps salvaged / condemned beml equipment be220 (3 nos in 2 places, equipment slnos 15001, 16045 and 16663, manufactured during 2008, approximately 54.39 mt), in dismantled condition. concrete and metal scrap were filled inside the counter weight structure in this lot (em). gas cutting permitted with buyer consumables. note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - scrap items including lab tested cut items product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps scrap items including lab tested cut items - track shoes, links, bushes, pinions, gears etc., in pallets, excluding pallets. (em) note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - scrap links pins bushes link chain assy product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps used / scrap links of various models (in 12 pallets, excluding pallets), pins, bushes, etc., in 2 pallets, excluding pallets. (em) note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - salvaged condemned beml equipment be200 product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps salvaged / condemned beml equipment be200 (1 no, equipment slno 10051, manufactured during 2008, approximately 17.535 mt), in dismantled condition (em). gas cutting permitted with buyer consumables. note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - condemned scrap radiators product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps condemned / scrap radiators with or without attachment, with / without copper tubes / cooling alluminium fins, etc. (approximately 250 kg) (em) note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - condemned scrap machines product type - plant/machineries category - machinery items pcb group - ferrous and non ferrous metals scraps condemned / scrap machines, including parts of machines, connecting cables, panels etc. (em) (gas cutting permitted with buyer consumables) note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - scrap aluminium electrical cable product type - electrical items category - cables pcb group - ferrous and non ferrous metals scraps used / scrap aluminium electrical cable (em) - in as is condition.note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - condemned scrap tempering furnance product type - electrical items category - others pcb group - ferrous and non ferrous metals scraps condemned / scrap tempering furnance, approximately 10.167 mt (em) gas cutting permitted with buyer consumables.not e : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - obsolete discarded wheel disc rims product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps obsolete / discarded wheel disc rims, 3,440 kg approximately (em)note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - scrap gi ms pipes product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps scrap gi / ms pipes of various sizes with or without end fittings (em)note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - flame cutting powder product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps flame cutting powder with small steel cut pieces, without steel barrels. (em) gas cutting of barrels is permitted with buyer consumables, for emptying the barrels. note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - scrap automobile spares product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps scrap automobile spares and machine spares, etc. (em)note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - scrap condemned field returned track chains product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps scrap / condemned field returned track chains, 9.515 mt approximately (em)note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - rusted i beam round rod square bar channel product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps rusted i-beam, round rod, square bar, channel etc. (em) gas cutting is permitted with buyer consumables. note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - obsolete discarded field returned condemned axles pto product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps obsolete / discarded / field returned / condemned axle assemblies, pto, transmissions and connected parts / sub- assemblies, etc. in 2 places (em). gas cutting permitted with buyer consumables. note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - used scrap heavy castings forgings product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps used / scrap heavy castings, steel / cast iron scrap-field failure items, forgings fabricated structures with casting, etc. in 2 places (em). gas cutting permitted with buyer consumables. note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - scrap codemned ms cabins product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps scrap / codemned ms cabins 14 nos (em). gas cutting permitted with buyer consumables. note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - scrap condemned gi ms sheet metal items product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps scrap / condemned gi / ms sheet metal items, structural items, ducts, parts of air compressor housing unit, etc. (em) (gas cutting / dismantling permitted with buyer consumables / tools) note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - scrap dc wheels product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps used / scrap dc wheels, cutting wheels etc., 4 mt approximately, without box/palletnote : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - scrap track shoe profile end cut pieces product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps scrap boron steel track shoe profile end cut pieces, etc. (em) note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - used scrap sheet metal items fabricated parts structures product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps used / scrap sheet metal items, fabricated parts, structures, base structure, sfg items, etc. (em) (gas cutting / dismantling permitted with buyer consumables / tools) note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - condemned obsolete old model bl9h engines product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps condemned / scrap / used / obsolete old model bl9h engines 30 nos, approxiately 14.365 mt, in 2 places (em) note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - scrap roller assembly product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps scrap roller assembly, 31 nos, 6.835 mt approximately (em) note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - scrap track shoe gas cut end bits product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps scrap track shoe gascut end bits, in as is condition, without pallet box (em) note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - condemned used lifting chains product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps condemned / scrap / used lifting chains (em) note : bidders should posses valid kspcb authorization for actual use / recycling for this scrap. | lot no - lot name - scrap ms fabricated sq tubes channels pipes product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps scrap ms fabricated sq.tubes/channel s, pipes, etc., (rc) (gas cutting permitted with buyer consumables) note : bidders should posses valid kspcb authorization for actual use/recycling for this scrap. | lot no - lot name - salvaged condemned fork lift truck 3ton capacity godrej product type - plant/machineries category - crane/earth moving equipments sub category - forklift pcb group - ferrous and non ferrous metals scraps salvaged/conde mned fork lift truck 3ton capacity (godrej) serial no.33395 & 33402, asset/inventory no.4401123 & 4401124, as is, where is condition. flm no.2490003. wt : 6.5 mt approx.1.gas cutting is permitted with buyer consumables.2.u sage of suitable material handling equipment of buyer is permitted to lift the vehicle from existing location.3.any damages to surrounding, cost of the damage is to be borne by the buyer as decided by beml authorities.4.dism antling is allowed with buyer toolings and consumables.not e : bidders should posses valid kspcb authorization for actual | lot no - lot name - salvaged condemned fork lift truck 5ton capacity godrej product type - plant/machineries category - crane/earth moving equipments sub category - forklift pcb group - ferrous and non ferrous metals scraps salvaged/conde mned fork lift truck 5ton capacity (godrej) serial no.60362, asset/inventory no.4401121 (as is, where is condition). flm no.2490003. wt : 6.5 mt approx.1.gas cutting is permitted with buyer consumables.2.u sage of suitable material handling equipment of buyer is permitted to lift the vehicle from existing location.3.any damages to surrounding, cost of the damage is to be borne by the buyer as decided by beml authorities.4.dism antling is allowed with buyer toolings and consumables.not e : bidders should posses valid kspcb authorization for actual use/recycling for this scrap. | lot no - lot name - salvaged condemned hydraulic mobile lift table product type - plant/machineries category - tools & equipments pcb group - ferrous and non ferrous metals scraps salvaged/conde mned hydraulic mobile lift table, asset/inventory no. 4401126 & 4401127 (as is, where is condition). flm no. 2490003. wt : 1.9 mt approx.1.gas cutting is permitted with buyer consumables.2.u sage of suitable material handling equipment of buyer is permitted to lift the vehicle from existing location.3.any damages to surrounding, cost of the damage is to be borne by the buyer as decided by beml authorities.4.dism antling is allowed with buyer toolings and consumables.not e : bidders should posses valid kspcb authorization for actual use/recycling for this scrap. | lot no - lot name - salvaged condemned battery operated truck jaldoot product type - transport vehicles category - others pcb group - ferrous and non ferrous metals scraps salvaged/conde mned battery operated truck (jaldoot) asset/inventory no.4401128 (as is, where is condition). flm no. 2490003. wt : 500 kg approx.1.gas cutting is permitted with buyer consumables.2.u sage of suitable material handling equipment of buyer is permitted to lift the vehicle from existing location.3.any damages to surrounding, cost of the damage is to be borne by the buyer as decided by beml authorities.4.dism antling is allowed with buyer toolings and consumables.not e : bidders should posses valid kspcb authorization for actual use/recycling for this scrap. | lot no - lot name - used damaged tube light fittings product type - electrical items category - others pcb group - ferrous and non ferrous metals scraps used/damaged tube light fittings with/without copper chokes etc., (approximately 350 kg, as is, where is condition) note : bidders should posses valid kspcb authorization for actual use/recycling for this scrap. | lot no - lot name - used scrap ms items product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps used/scrap ms items (includes rail coach sub assy’s like brackets, mounting frame, channel assy, clamp assy etc., different plate/fabricated components, angles, channels, tubes, etc.,) (rc) (gas cutting permitted with buyer consumables) note : bidders should posses valid kspcb authorization for actual use/recycling for this scrap. | lot no - lot name - used scrap ms sheet metal fabricated rejected parts product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps used/scrap ms sheet metal/fabricated rejected parts (angles,channels, brackets, sub assys, etc.,) (rc) (gas cutting permitted with buyer consumables) note : bidders should posses valid kspcb authorization for actual use/recycling for this scrap. | lot no - lot name - scrap plastic welding spools product type - miscellaneous category - plastic pcb group - plastic scrap scrap plastic welding spools with or without ms-coils / residules (em)note : bidders should posses valid kspcb / central authorization as recycler for this scrap. buyer should use authorised vehicle only for transportation of the hazardous material. buyers need to get noc from pollution control boards of receiving states. | lot no - lot name - obsolete discarded brake pads brake bands product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps obsolete / discarded brake pads, brake bands, etc. (em)note : bidders should posses valid kspcb / central authorization as recycler for this scrap. buyer should use authorised vehicle only for transportation of the hazardous material. buyers need to get noc from pollution control boards of receiving states. | lot no - lot name - condemned scrap hoses with springs product type - miscellaneous category - rubber pcb group - rubber scrap condemned / scrap hydraulic hoses surronded by springs, with end fittings, in assorted sizes. (em)note : bidders should posses valid kspcb / central authorization as recycler for this scrap. buyer should use authorised vehicle only for transportation of the hazardous material. buyers need to get noc from pollution control boards of receiving states. | lot no - lot name - condemned scrap filters product type - metal category - iron and steel pcb group - ferrous and non ferrous metals scraps condemned / scrap diesel engine oil filters (em)note : bidders should posses valid kspcb / central authorization as recycler for this scrap. buyer should use authorised vehicle only for transportation of the hazardous material. buyers need to get noc from pollution control boards of receiving states. | lot no - lot name - used oil filled in barrels product type - petroleum products category - used/ waste oil pcb group - used spent/burnt oil/used lube oil/used engine oil used / waste hydraulic / transmission etc., oil filled in 205/210 ltr barrels, in as is where is condition (em) note : bidders should posses valid kspcb / central authorization as recycler for this scrap. buyer should use authorised vehicle only for transportation of the hazardous material. buyers need to get noc from pollution control boards of receiving states. | lot no - lot name - scrap empty oil tins product type - container category - can/tin pcb group - empty barrels/containers/l iners contaminated with hazardous chemicals/wastes scrap empty oil tins (15 kg capacity), approximately 120 kg (em)note : bidders should posses valid kspcb / central authorization as recycler for this scrap. buyer should use authorised vehicle only for transportation of the hazardous material. buyers need to get noc from pollution control boards of receiving states. | lot no - lot name - damaged rubber pneumatic and rubber solid cushion tyres product type - miscellaneous category - rubber pcb group - rubber scrap old/used/damag ed rubber pneumatic and rubber solid cushion tyres with/without rims & flaps/tubes (solid cushion/pneumati c tyres of forklift tyres-40nos, sideloader tyres- 05nos, mobile crane tyres- 02nos, battery truck tyres-01no & two wheeler scooter tyres- 02nos) wt : 1,500 kg approxnote : bidders should posses valid kspcb / central authorization as recycler for this scrap. buyer should use authorised vehicle only for transportation of the hazardous material. buyers need to get noc from pollution control boards of receiving states.
Agency / Dept :
mstc limited metal scrap trade corporation limited
Due Date :
Aug 19, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16062452
Location : ajmer , rajasthan
auction or scrap of lot no - 1 lot name - e -waste material product type - electrical items category - others - e -waste material pcb group - e- waste-rule 2022 desktop computer, ceiling fan , wll adaptor , hauwei smartax rack with 2 nos mother board, power supply adapter kindly check annexures for more details location- as per annexures contact for inspection- as per annexures
Agency / Dept :
bharat sanchar nigam limited BSNL
Due Date :
Jul 08, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16062465
Location : nagpur , maharashtra
auction or scrap of lot no - 1 lot name - e-waste / electrical scrap - as per the annexure attached product type - electrical items category - others - ac units, fan, miscellaneous electrical items, etc pcb group - e- waste-rule 2022 e-waste / electrical scrap - as per the annexure attached false ceiling lights, tubelight fittings, ac pipes, indoor ac units, outdoor ac units, ceiling fan, led/batten light fittings, miscellaneous electrical items, water heaters / geysers (storage type), circular led surface lights, gi / pvc conduit pipes (long), etc | lot no - 2 lot name - ferrous & non-ferrous metal scrap - as per the annexure attached product type - metal category - mixed metal scraps ferrous & non- ferrous metal scrap - as per the annexure attached steel chairs, steel tables, aluminium partition members/panels, steel drawers, rack, heavy steel bed, ms keyboard boards / trays, ms pipe, steel cupboards / lockers, aluminium sections, aluminium partition members, mild steel letter boxes, ms reinforcement rods / tmt bars, metal window/grill frames, etc. | lot no - 3 lot name - wooden furniture & miscellaneous scrap - as per the annexure attached product type - miscellaneous category - furniture wooden furniture & miscellaneous scrap - as per the annexure attached revolving chairs, plywood partition panels, teak wood doors, wooden tables, cpu stands, plastic chairs, wooden cabinets / storage units, wooden panels / plywood sheets, sofa set, cp brass bib cocks / pillar cocks / angle valves (mixed), flexible connection hoses, miscellaneous plumbing scrap (nuts, unions, adapters etc.), wooden cabinet doors / laminated panels, etc.
Agency / Dept :
reserve bank of india RBI
Due Date :
Jul 10, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16448737
Location : sikar , rajasthan
Source : GEM Tenders
corrigendum tender for capacity 20 to 160 mm , cylinder liner dry and wet liner press fit and slide fit , depth micrometer 0 to 25 mm , dial gauge type 1 gr a complete with clamping devices and with magnetic stand , different type of engine bearing model , different types of piston model , dividers with spring 150 mm , drift punch copper 150 mm , drill point angle gauge , drill twist 1.5 mm to 15 mm various sizes by 0.5 mm , electric soldering iron 60 watt 230 v , electric soldering iron 25 watts 230 v , electric testing screw driver , engineers stethoscope , feeler gauge 20 blades metric , file flat bastard 200 mm , file half round second cut 200 mm , file square second cut 200 mm , file square rough 300 mm , file triangular second cut 150 mm , files assorted sizes and types including safe edge file 20 nos , flat file second cut 250 mm , flat file bastard 350mm , fuel injection pump diesel in line , fuel injection pump dismantling tool kit universal vice , fuel injection pumps ve pump distributor fuel rotary pump dpc pumps along with special tools and accessories , glow plug tester , surface plate l 1600 w 1000 mm c i granite with stand and cover , grease gun , growler , hacksaw frame adjustable type 200 to 300 mm , hammer ball pein 750 gm , hammer chipping 250 gm , hammer copper 1 kg with handle , hammer mallet , hand operated crimping tool wire up to 4 mm , hand operated crimping tool wire up to 10 mm , hand shear universal 250 mm , hollow punch set of seven pieces 6 mm to 15 mm , injector cleaning unit technical , injector testing set hand tester , lifting jack screw type 3 ton capacity , lifting jack screw type 5 ton capacity , lifting jack screw type 20 ton capacity , magnifying glass 75 mm , marking out table l 90 w 60 h 90 cm , multi meter digital , oil pump gear type pump for lmv , oil pump rotor type pump for lmv , oil stone l 15 w 5 h 2.5 cm , oscilloscope 20 mhz , micrometer outside 50 to 75 mm , micrometer outside 75 to 100 mm , pipe flaring tool , piston ring compressor , pliers round nose 150 mm , portable electric drill machine , prick punch 150 mm , punch number 4 mm , rivet sets snap and dolly combined 3 mm 4 mm and 6 mm , scraper flat 250 mm , scraper half round 250 mm , scraper triangular 250 mm , scriber with scribing block universal , set of stock and dies metric , tinmans shear l 450 mm w 600 mm , sheet metal gauge , tinman s shear 300 mm , soldering copper hatchet type 500 gm , solid parallels in pairs different sizes in metric , spanner clyburn 150 mm , spanner t flocks for screwing up and up screwing inaccessible , spanner adjustable 150 mm , spark lighter , spark plug spanner l 14 mm w 18 mm size , steel rule 150 mm inch and metric , straight edge gauge 2 ft , straight edge gauge 4 ft , tachometer counting type , tandem master cylinder with booster working model , taps and dies complete sets b a , taps and dies bsw various type in inch , tap and dies set metric size 03 to 24 mm , taps and die set bsf various type in inch , taps and dies width worth fine , timing lighter new brand , torque wrenches 5 to 35 nm , torque wrenches 12 to 68 nm , torque wrenches 50 to 225 nm , tyre pressure gauge with holding nipple , universal puller , v block l 75 w 38 mm pair with clamps , valve lifter , valve spring compressor universal , vernier caliper 0 to 300 mm with least count 0 point 02 mm , water pump new brand , wire gauge metric , vices of 120 mm jaw , air conditioned crdi vehicle new brand lmv bs vi with abs and speed limiter , arbor press, mechanic diesel lab items, allen key set of 12 pieces with hex key sizes 2 to 14 mm made from forged steel alloy carbon steel, caliper inside 150mm spring made of carbon steel gauging point should be heat treated, centre punch 10mm dia x 100 mm round knurled body made of alloy steel gauging point should be heat treated, screw driver 250 x 9 mm flat tip size 8 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, properly heat treated., hammer ball pein, head weight 500 gm made from forged carbon steel, face heat treated. with wooden handle, hand file 200mm second cut, made of heat treated tool steel with wooden handle., philips screw driver 100 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip with neon tester., philips screw driver 150 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 200 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 250 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 300 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, pliers combination 200mm insulated with moulded sleeves of high voltage grade, made from drop forged alloy steel with side cutting facilities, properly heat treated., screw driver heavy duty 200mm x 9 mm flat tip size 9 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., screw driver heavy duty300mmx 9mm flat tip size 10 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., spanner d.e. 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanner ring 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanners socket with speed handle, t-bar, ratchet and universal up to 32 mm set of 28 pieces with box. made from forged carbon steel., steel rule 300 mm. metric, english both graduation made of stainless steel with conversion table engraved, as per drawing l 150 mm w 200 h 400, wire cutter & stripper 150 mm made of high carbon steel , wire stripping capacity up to 6mm, spanner adjustable 350 mm blade, made from alloy steel, workshop grade, 1 should be trigger operated blow gun with interchangeable nozzles with metal gun 2 fitted with brass air inlet ferrule 3 suitable for quick removal of chips, dust and particulate from any surface 4 operating pressure 80 to 150 psi 5 high pressure nozzle 6 safety nozzle adaptor 7 crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application 8 low pressure nozzle and supplied with manual, ammeter dc shunt type up to 300 amp the shunts are constructed from high grade managing, air ratchet with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box with manual, air impact wrench with 180 ft lb 244 nm max torque and 7100 rpm and a feather touch trigger two position forward power regulator and conveniently located forward reverse ring provide precise control with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box and manual will be provided. square drive half inch bolt size in the box 9 to 27 mm, angle plate size 200x100x200mm made from close grain c.i. workshop grade., anvil 50 kg. single horn type made from cast steel working face heat treated, face having hardie hole & punching hole, stand made from fabricated angle iron (50 x 50 x 6 mm) height 400 mm, alternator starter with minimum 2 hp ac motor digital auto electrical test bench checking for alternator and starter motor auto electrical test bench checking for alternator and starter motor mild steel frame work table top test bench 2 hp and 3 phase1440 rpm motor induction motor suitable for 50 hz 415 v ac supply with heavy duty transformer for starter testing with light run test variable frequency drive vfd overload capability 150 percentage of rated current 60 seconds built in pid simplify the establishment of a closed loop control system key lock and function selection communication port rs 485 4 point 3 inch colour hmi for indication for voltage and current 2 ch analogue input controlled via rs 485 bus utilizing modbus rtu protocol 1 channel dc current input with 75 mv input for shunt 1 channel dc voltage input 200vdc 1 construction of relay output 7a 230vac 2 leds for indicating the power status and signal trans receiving status capable to interface with pc attached with thermal printer communication interface rs485 rtu diode150 a 12 to 24 v 4 nos shunt 200a 75 mv transformer 12v 200 a 24 v 150 a 1 no transformer 0 to 240 v primary 12 to 0 to 12 v secondary 1 no mains supply 415 v ac 3 phase 50 hz ac power supply v belt heavy duty banana terminals on the front panel pulley groove for alternator checking heavy duty rugged vice for mounting alternator and starter operation manual should be provided, voltage 12v input volt 230v 50hz output volt 12 v dc capable for 5ah 35ah battery charged rotary swicth to select volt and amp ammeter display and main switch plus minus knob crocodile connector with wire 2 ft in length aligator clips high current charging upto 15 ampere circuit breaker for reverse battery auto cut off after charging, blow lamp capacity 1000ml body made from brass. with inclined burner type, should be used on vehicle belts where the manufacturer specifies the timing belt tension to be set at a specific location on the belt span between pulleys should have clear incremental markings with knurled knob for accurate measurement. should speed up timing belt installation .measurement range 0 to 80 kg 750 newton supplied in a foam inlay box, power supply electrical electrical cable m 5 mtr working pressure bar 8 to 12 kg cm2 hose length m 10 mtr suction and discharge each motor rpm 2800 rpm flow rate l h 8 to 12 lpm phase 1 phase 3 hp 230 volt suitable for cold water spray gun standard number of pistons plungers 3 pressure gauge auto stop facility for power saving suitable guns for water and foam sprey water filter pressure regulating valve for increasing and decreasing output pressure the operating unit should be mounted on a ms structure trolley type starter switch caster wheel 2 nos water pipe inlet and out let, automatic double pawl braking system capacity range 1- 3 ton fully forged hooks are fitted safety latches shield bearing zinc plated hand chain as standard standard lift 3 meter effort required to lift 3 ton load- 30 kg. with tripod stand & standard accessories., chisel flat 100mm, made of forged steel. point heat treated., circlip plier internal 150 mm drop forge alloy steel heat treatment moulded sleeve . ., circlip plier external 150 mm.drop forge alloy steel heat treatment moulded sleeve ., circlip plier internal 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., circlip plier external 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., clamps c 100mm, made of forged steel., clamps c 150mm, made of forged steel., clamps c 200mm, made of forged steel., tray cleaning 450 into 300mm -gi sheet 18 g side handle both border wires, 1 quickconnect adapter push pressure scale 0 1000 psi 0 7000 2 kpareads pressure from 0 to 1000 psi 3 2 to 9 by 16 diameter gauge 4 thumb button air release should be supplied with adapters for suzuki hyundai gm ford isuzu mercedes toyota volkswagen and peugeot compatible for dry test with adptor standard accessories all above items should be placed secured in a blow molded plastic box or metal box, connecting rod alignment fixture height of fixture 450mm connecting rod 40 to 100mm connecting rod alignment fixture checking bent twist offset precision ground surfaceshould be supplied with following accessories bent and twist indicator bending bar with alignerdial indicator and the connecting rod fixture ms iron should be fitted over a base etc with all accessory, soldering iron copper bit weight 250gm hatchet type with handle, cylinder gauge, bore dial gauge with accessories 20-160 mm least count 0.01 mm self cantering with interchangeable mounted head complete., technical specification cylinder liners of following types dry liner for engine cylinder press fit type wet liner for engine cylinder with rubber o ring slide fit liner piston with ringstandard features, micrometer depth 0 to 25mm lc 0 point 01mm carbide tipped on measuring face made from alloy steel complete in box, dial gauge indicator l.c. 0.1 mm ran- ge 10mm dial graduation 0-50-0 balance plunger type dial & holder. magnetic base with on-off switch, fine tolerance setting arm, stem dia. as per dial indicator, complete set in dial gauge., the model will made out of different type of engine bearing suitable for engine 1 shell bearing for crankshaft with main journal and big end journal 2 thrust bearing for crankshaft 3 ball bearing for crank shaft 4 bush bearing for connecting rod 5 needle bearing for connecting rod 6 bush bearing for camshaft & rocker arm 7 shell bearing for overhead cam shaft 8 needle bearing for rocker arm 9 name mention of each bearing on board, the model will be made out of different type of piston model. 01set concave head dome head flat head solid skirt recessed head light weight model for easy shifting. piston will be mounted on a wooden board name mentioned of each type the piston.and constructional diagram details printed on to a colourful panel with details of applications the item will be supplied in a dust proof box & covered by the acrylic sheet., divider spring joint 150mm, made of alloy steel., drift punch copper 150mm made by copper, drill point angle gauge made by drop forged steel., twist drill straight shank high speed steel 1.5 to 15mm by 0.5mm set 10pcs. high carbon steel &heat treated., soldering iron 60 watt, 230 v.a.c. standard length of mains lead with 3 pin top, bit made from copper., soldering iron 25 watt, 230 v,.a.c. standard length of mains lead with 3 pin top, bit made from copper., neon tester 500 volt heavy duty insulated. handle made from transparent cellulose acetate with plated metal clip. blades made from selected steel chrome & insulated., engineer s stethoscope with standard accessories, feeler gauge set of 20 blades metric, different sizes, length of blades 100 mm, made from alloy steel., file flat 200mm bastard made of heat treated tool steel with wooden handle., file half round 20cm second cut, made of heat treated tool steel with wooden handle., file square 200mm second cut, made of heat treated tool steel with wooden handle., file, square 300mm rough, made of heat treated tool steel with wooden handle., file triangular 150mm second cut, made of heat treated tool steel with wooden handle., files assorted sizes and types including safe edge file (20 nos), made high carbon/high speed steel. size (150 mm)., file flat 250mm second cut, made of heat treated tool steel with wooden handle., file flat 350mm bastard, made of heat treated tool steel with wooden handle., fuel injection pump (diesel) inline complete pump assembly suitable for 4/6 cylinders diesel engine rsv mechanical or pneumatic governor type the item will be supplied on suitable plywood and collared with attractive colour. a dust proof wooden box & covered by the acrylic sheet., fuel injection pump dismantling tool kit 1. universal vice 2. pre stroke setting attachment with gauge, 3. pump couplings, 4. control setting gauge with attachment, 5 .tappet adjusting spanner (thin),6. ring wrench,7. tappet lifter, 8. mechanical finger (gripper), 9. adapter capsule box for fip, 10. thread puller for fly weight, 11. drift for bottom plug, 12. impact screw driver, 13. flower/trox allen key set, 14. attachment for setting angle of accelerate lever, 15. coupling for fip cam, coupling wrench, 16. round nut spanner different type, 17. ve pump holding attachment, 18. inline and rotary pump holding attachments,19. drift for installing and removing oil seal, 20. holder spanner, 21. spring locking plates, 22. governor weight remover., fuel injection pump in diesel type distributor fuel rotary pump with dpc complete pump assembly compatible for 4 cylinders diesel pump operated by handle and constructional diagram details printed on to a colourful panel with details of applications will be supplied with along with all tools and special tools and accessories for dismantling and assembling fuel injection pump special tools 1 extra long socket 2 mounting stand for ve pump distributor fuel rotary pump dpc pumps 3 injection pump special socket 4. coapling for ve pump distributor fuel rotary pump dpc pumps 5 testing jig 6two pin spnner 7 huk spanner 8.pump nozzle refting tool, power input 8point 5 to 15 volt max current 80 ampere, surface plate made of closed grain seasoned cast iron/ granite 1600 mmx 1000 mm grade 1, with calibration test certificate, complete with top cover, side handle. m.s. fabricated standard height stand with leveling screws ., grease gun pressure type 500 gm. capacity hand operated, manufactured from tin plate with steel pump with fixed spot., growler general & internal set suitable to test d.c. armature and ac motor starter rating supply ac. 250volt 50hz., hacksaw frame adjustable type 200-300mm with blade & handle., hammer ball pein head weight 750gm made from forged carbon steel, face heat treated. wooden handle fitted, hammer chipping 250gm with handle, one side chisel and other side pointed end type hard and tempered, steel handle about 250 mm long., hammer copper forged head weight 1000gm with fibre glass handle,, hammer mallet head dia.100 mm. made from wood with handle., hand operated crimping tool for crimping up to 4 mm, hand operated crimping tool for crimping up to 10 mm, hand shear universal( straight snip ) 250 mm, made from drop forge steel. cutting edge hard & tempered., punch hollow, hole dia 6 to 15 mm set of 7 pieces made from alloy steel, main unit power supply ac 220v plus minus 10 percent 50hz ultrasonic cleaner power 30 to 50w ultrasonic bath inner body material stainless steel simulated rpm range 10 to 9990 rpm step 10 rpm time range 1 to 9999 pulse width 0 point 5 to 25 ms step 0 point 1ms fuel tank capacity 2 to 4 ltr no of glass tube 4 nos with marking glass tube holder and manifold moc aluminium display type led suitable for all types of petrol injectors and gdi gasoline direct injection injectors achieve automatic cleaning and testing of injectors the machine should be capable to perform flowing test uniformity/spray ability test will be able to test the uniformity of injecting amount of each injector and to monitor the spraying status of each injector with the help of backlight leakage test will be able to test the sealing and dribbling conditions of injectors under system pressure injecting flow test will be able to check the injecting amount of the injector in 15 seconds of constant injection auto test will be able to test injectors by simulating different working conditions ultrasonic cleaning will be able to perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely, for nozzle sizes presser gauge 0 to 400 kgf cm2 standard accessories steel aluminium fuel container with filter manual hand operating lever handle with grip. along with split pin three way shut off valve with valve spindle. suitable fuel pipes for all injector, lifting jack screw type 3 ton capacity for vehicle 3048 kg road open height 13 inch closed 4 inch dia of screw 1 point 25 inch with bearing type lifting jack, lifting jack screw type 5ton capacity for vehicle 5048 kg road open height 13 closed 7 inch dia of screw 1 point 50 inch with bearing type lifting jack, lifting jack screw type 20 ton capacity road open height 14 inch closed 7 dia of screw 1 point 75 inch to 2 point 0 inch square threads with bearing type, magnifying glass 75mm with handle, marking table made from seasoned close grain c.i. 90cm x 60cm x 90cm. workshop grade with test certificate. with steel handle both side, levelling screws & cover. m.s. fabricated stand in standard size, digits 3 and half digit display lcd display with large digits for easy visibility voltage range ac up to 750v ac voltage range dc up to 1000v dc ac and dc current range up to 20a resistance measurement up to 200 mohm with capacitance frequency diode transistor test audible continuity test data hold facilities, 1. gear type pump for lmv this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine, 1. rotor type pump for lmv. this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine., stone oil 15 x 5 x 2.5 cm. one side rough & one side smooth., analog oscilloscope 20 mhz two channel 4 trace monochrome display 1 general portable rugged including features of component tester and in built frequency counter 2 bandwidth dc to 20 mhz 3d b 3 of channels two channels 4 deflection coefficient in calibrated steps from 5 mv to 5 v cm 5 rise time 17 point 5 ns 6 variable hold off for stable triggering 7 input impedance 1 mohm 25 pf 8 time base coefficients 18 calibrated steps 0 point 5microsec per cm to 0 point 2 sec cm with 5 magnifier to 100ns cm 9 trigger system automatic and normal level adjustable 10 source ch i ch ii alt line external 11 slope positive negative 12 coupling ac dc gnd 13 sensitivity 5 mm 14 trigger bandwidth 40 mhz 15 horizontal deflection dc 2 point 3 mhz 3db bandwidth 16 x to y mode phase shift 3 degree up to 60 khz 17 frequency counter range 20 hz to 30 mhz in built 18 computer interface usb 19 resolution 10 hz 10 khz 20 sensitivity 0 to 5v by div 21 attenuation 1 ratio 1 and 1 ratio 20 22 max input voltage 300 v rms cat ii 23 crt 140 mm rectangular with internal graticule and p31 phosphor 0 point 8 mm green colour plexiglass 24 calibrator operator 1 khz square wave 0 point2 vpp for probe compensation 25 z modulation ttl level 26 power supply 230 v plus minus 10 percent 50 hz ac supply component tester built in single touch, micrometer outside 50 to 75 mm l c 0 point 01 mm carbide tipped on anvil and spindle measuring face with spindle lock setting spanner and test piece 50 mm made of alloy steel complete in box with master, micrometer outside 75-100 mm, least count 0.01mm, carbide tipped on anvil &spindle measuring face, with spindle lock, setting spanner & test piece 75 mm, made of alloy steel complete in box with master., flaring tool set single type for tube 4 point 7 to 16 mm o d block and cone made of alloy steel and hard tempered nickel chrome plated able to flaring 1 by 2 inch 7 by 16 inch 1 by 4 inch 3 by 16 inch 3 by 8 inch and 5 by 8 inch o d, piston ring compressor 50 to 150 mm 2 1 by 2 inch wide spring bands equally distributes tension for easy compression for use on all passenger vehicles, pliers combination 200 mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, pliers nose 150mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, drill machine portable electrical 15 mm capacity a c single phase input full load 235 watt rpm 2800 and standard length supply cable and key, prick punch 150mm knurled body made from tool steel tip ground and heat treated, punch number 4 mm made from tool steel hardened set containing set of 9 piece 0 to 9 in suitable container, rivet sets snap and dolly combined 3 mm 4 mm 6 mm hand operated mabe drop forgd steel, scraper flat 250mm made from tool steel tip hardened and ground with wooden handle, scraper half round 20mm made from tool steel tip hardened and ground with wooden handle, scraper triangular 250mm made from tool steel tip hardened and ground with wooden handle, scriber with universal scribes block and accessories, dies set of stock and dies metric dies 3 4 5 6 8 10 12 14 16 and 18 set of 10 made from alloy tool steel dies circular split pattern type with suitable die stock with suitable dies handle dies hardened and tempered complete set in box, heavy duty cast iron body blade length600mm blade material d2 table size 450 mm into 600 mm back gauge attachment table 2t slot paddle spring operated, sheet metal gauge made from alloy steel steel graduation in both system british and metric, tinmans shear 300 mm made from drop forge steel cutting edge hard and tempered, soldering copper hatchet type 500 gms, solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated size 1 by 2 inch accuracy 0 point 0002 inch material made of high quality alloy steel precision ground and hardened product includes one pair of 1 inch into 6 into 1 by 2 into one pair of 1 to 1 by 2 inch into 6 into 1 by 2 inch one pair of 1 to 1 by 4 inch into 6 into 1 by 2 inch one pair of 1 to 3 by 4 inch into 6 into 1 by 2 inch application to be used in setting up work for drilling and milling, spanner clyburn 150mm. made from forged carbon steel. phosphate finish, spanner t flex for screwing up and unscrewing in inaccessible position and size 6 8 10 12 14 set of 5 pcs, spanner or wrench adjustable 150mm. standard pattern selected, made from forged steel heat treated, spark lighter friction type suitable for gas lighting, spark plug spanner size14 into 18 mm made from forged carbon steel, steel rule 150mm metric english both graduation made of stainless steel with conversion table engraved, straight edge 600 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, straight edge 1200 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, tachometer counting type display 5 digit lcd display accuracy plus minus 0 point 05 percent plus 1 digits rpm test range 2 to 99 999 rpm count range 1 to 99 999 counter resolution 0 point 1 rpm 2 to 999 point 9 rpm 1 rpm over 1000 rpm sampling time 0 point 5 sec over 120 rpm detecting distance 50 to 500 mm, this model which will give a complete idea of tandem master cylinder in vehicle and it s function the working model of tandem master cylinder assembly consisting of following minimum parts and practically demonstrable brake disc assembly one caliper assembly brake pad tandem master cylinder with vacuum booster vacuum pump brake hoses oil reservoir with oil with brake pedal features the model will be mounted on m s stand with good quality paint applications suitable sectioned to demonstrate the internal construction diagram details printed on to a colourful panel operating manual will be provided., taps and dies set b.a. 0 to 10 circular split pattern die & hand tap set of 3 piece made from alloy tool steel with suitable die stock and tap handle. taps and dies hardened & tempered. complete set in box, taps and dies b s w 1 by 4 5 by 16 3 by 8 inch 7 by 16 1 2 5 by 8 3 4 inch 7 by 8 1 inch set of 9 made from alloy tool steel dies circular split pattern type with suitable die stock hand tap set of 3 piece and tap handle taps and dies hardened and tempered complete set in box, tap and dies set metric size 03 to 24 mm 3 4 5 6 8 10 12 14 16 20 22 24 mm set of 12 made from alloy tool steel dies hand circular split pattern type with die stocks tap set having three piece taps with suitable tap handle and according to size taps and dies hardened and tempered complete set in box, taps and die set b s f by 4 5 by 16 3 by 8 inch 7 by 16 1 by 2 9 by 16 5 by 8 3 by 4 7 by 8 1 inch set of 10 made of alloy tool steel tap set of 3 piece circular split pattern die set tap wrenches and die stocks taps and dies hardened and tempered complete set in box, taps and dies width worth fine 1 by 8 inch 3 by 16 inch 3 by 8 inch 1 by 4 inch 5 by 16 inch 7 by 16 inch 1 by 2 inch 5 by 8 inch 3 by 4 inch 1 inch set of 10 made from alloy tool steel dies circular split pattern type with die stock hand tap set of 3 pieces with suitable tap handle. tap and dies hardened and tempered complete set in box, timing lighter with neon bulb for setting of all kind of petrol engine timing illumination angle approx 15 degree strobe tube high intensity xenon tube with cable used for checking ignition timing of petrol engine easily operate on 12v ignition systems 12 volt battery operated focused lens should provide light for high visibility of timing mark suitable for petrol carstwo wheelers handle design be more comfortable and easy to operate manufactured by standard company provided with suitable woodenplastic metal box, torque wrench 5 to 35 nm force, adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 12 to 68 nm force adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 50 to 225 nm force, adjustable by turning knurled handle barrel type rod form chrome plated. brake over type, tyre pressure gauge with holding nipple for measuring 0 to 160 lb by sq inch and 0 to 12kgf by sq cm of tyre pressure, universal puller for removing pulleys bearings, v block 75 into 38 mm pair with clamps v block pair with one clamps 75 into 38 into 50 mm by 75 into 50 into 50 mm made from close grain c i workshop grade, valve lifter valve spring for lifting & realizing of spring automatic ratchet lock c type reversible jaw adaptor for multi valve engines capacity 45 to 145mm throated clearance 250mm big window jaw adaptor for easy replacement of valve collects, valve spring compressor universal suitable for various cylinder head engine models, vernier calliper 300 mm length with metric and inch scale l c 0 point 02 mm four way quadric measurement type made from stainless chrome steel micro lapped hardened and tempered in box, automotive water pump of any multi cylinder water cooled engine for dismantling and assembling colored with attractive color. good finish the model will be fitted on suitable plywood sheet and constructional diagram details printed on to a colourful panel with details of applications, wire gauge made from alloy steel, gauge size 0 to 36 swg graduation in metric, bench vices 12cm jaw body made from close grain sg iron and serrated alloy steel jaw jaw heat treated spindle handle dia grater than equal 10 mm and closed on both end unbrakable materials screw materials en 24, engine type 3 cylinder inline common rail turbo diesel iron block air conditioned type displacement 1500 cc rear wheel drive water cooled engine fuel system common rail direct injection body two box five door wagon transmission type 5 speed manual suspension front independent with coil spring rear independent with coil spring steering type power assisted steering power window all four windows reverse gear sensors. anti theft device gprs inbuilt turning diameter 11 point 6 m ground clearance 180 mm wheel base 2680 mm fuel tank 60 litre s standard accessories owner s manual bs vi with abs and speed limiter, an arbor press is a small hand-operated press. it is typically used to perform smaller jobs such as staking riveting installing configuring and removing bearings and other press fit work removable machined steel anvil provides accurate work support in for slot positions automation grade manual material iron weight 30 to 50 kg usage application industrial capacity 2 ton, exhaust gas analyzer petrol arai approved to check construction of co2 o2 and hc and nox 1 construction of carbon monoxide range 0 to 9 point 999 percent resolution 0 point 01 percent 2 co2 carbon dioxide range 0 t
Agency / Dept :
department of technical education DTE
Due Date :
Jul 30, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15752695
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
corrigendum tender for 25pmuc008 em6290b-700425000049 plate , em6290b-006796012100 conical spr washer , em6290b-304014010013 hex screw , em6290b-700429008001 o ring , em6290b7603014106 sealing ring , em6290b-7603022102 sealing ring , em6290b-000171160 seal ring for set w6 , em6290b-0005333080 o ring , em6290b-0012377312 isolator 60sh rd314b , em6290b-001474006000 grooved pin , em6290b-007603022105 washer a cop , em6290b-0259972048 o ring , em6290b-200835008005 stud , em6290b-304017008079 screw , em6290b5100850060 piston ring , em6290b-5110251976 washer , em6290b-5119940041 ring snap , em6290b-5132155 seal ring , em6290b-5240110159 carbon scrapper ring , em6290b-5240500930 push rod , em6290b5240530830 valve guide , em6290b-5240530905 valve exhaust std floating bridge , em6290b-5240531101 valve intake std floating bridge , em6290b5240550320 bolt adjusting , em6290b-5240550550 bushing , em6290b-5240900850 fuel delivery pump , em6290b-5241870147 pate , em6290b-5249970545 sealing ring , em6290b-5261400026 shaft , em6290b5410180233 diaphgarm , em6290b-5501871180 gasket , em6290b-5552032880 gasket , em6290b-5589900163 flow restrictor , em6290b-700327028000 grommet , em6290b-700429011002 o ring , em6290b-700429012002 o ring , em6290b-700429021001 o ring , em6290b700429027001 o ring , em6290b-700429028005 o ring , em6290b-700429032003 o ring , em6290b-700429033001 o ring , em6290b-700429035000 o ring , em6290b700429039000 o ring 39 2x3 , em6290b-700429075002 o ring , em6290b-700429172000 o ring , em6290b700429175001 o ring , em6290b-700429200002 o-ring , em6290b-700429418000 o ring , em6290b-700429420000 o ring , em6290b-7603014102 sealing ring , em6290b7603018101 washer a cop , em6290b-8699930063 dished washer , em6290b-8699970005 gasket , em6290b-8699970154 adhesive , em6290b- 915006006000 straight connector , em6290b- 934010005 hex nut , em6290b-x00010428 washer , em6290b-x00040625 cover for solars , em6299b- 25405497 4 by 2 way valve , em6299b-xp52717300088 repair kit , em6290b-007603017102 ring sealing a17x21 , em6290b-007603018104 sealing ring , em6290b-0472068000 ring snap , em6290b- 200433010500 washer , em6290b-206796016000 cynical spr washer , em6290b-304017010051 hex screw , em6290b-49978190 clamp , em6290b- 5240160321 gasket , em6290b-5240701433 tube asm cyl head fuel return , em6290b-5240780047 adapter , em6290b-5261420060 flange sealing , em6290b- 5304334 ground strap , em6290b-5319970345 sealing ring for set w6 , em6290b-5359930020 spring torsion , em6290b-5590981750 flange , em6290b-700223006000 benjo screw , em6290b-700327006000 grommet 6 , em6290b-700327008000 grommet , em6290b- 700368042004 rubber sleeve 42x100 , em6290b- 700429023002 o-ring for set w5 , em6290b- 700429028002 o ring 28x4 , em6290b-700429055001 o ring , em6290b-700429060002 o-ring 60x4 for set w5 , em6290b-700429070000 o ring , em6290b-700429110000 o-ring for set w5 , em6290b-700429185001 o ring , em6290b-735080010200 regulator fuel retur n 0 point 5 bar , em6290b-735080018200 valve check 0 point2 bar rhdk 18-l 0 point 2 , em6290b- 735080018202 check valve , em6290b-735211012000 union , em6290b-7603010110 washer a cop , em6290b- 7603012111 washer a cop , em6290b-7603026104 washer a cop s2000 by 4000 , em6290b-7603030101 washer a cop , em6290b-7603045101 washer a cop , em6290b-7603052101 washer a cop , em6290b- 8595860330 repair kit , em6290b-8691710010 sealing ring , em6290b-8695860599 repair kit , em6290b- ex52403500019 vibration damper , em6290b- x00042774 pipe , em6290b-x00042803 servo-locker , em6290b-xp52725100119 parts kit , em6290b- xp52725100120 spare parts kit , em6299b- xp59408300034 filter cartridge , em6299b- xp59408300095 filter element , em6290b-5260900009 cylinder , em6290b-5272010401 volute , em6290b- 5330280 o ring 11 point 3x2 point 2 , em6290b- 700429025001 o ring 26 x 2 point 5 mmn 294 , em6290b- 700429042000 o ring , em6290b-700429083000 o ring , em6299b-xp52800600016 repair kit , em6299b- xp52899100719 basic body , em6290b-5360980218 actuating cylinder , em6290b-7603014103 washer a , em6290b-7603016105 washer a cop , em6290b- 934008008 hex nut , em6299b-x52820400001 cooler plate b , em6299b-x52820400002 cooler plate version c , em6299b-x00041552 cooler plate a version , em6299b-x00014409 gasket , em6299b- x00034972 stop , em6299b-xp52707700004 snap ring , em6299b-xp52707700005 o-ring , em6299b- xp52707700010 o-ring , em6299b-x56912300043, em6290b-700425000049 plate, em6290b-006796012100 conical spr washer, em6290b-304014010013 hex screw, em6290b-700429008001 o ring, em6290b-7603014106 sealing ring, em6290b-7603022102 sealing ring, em6290b-000171160 seal ring for set w6, em6290b-0005333080 o ring, em6290b-0012377312 isolator 60sh rd314b, em6290b-001474006000 grooved pin, em6290b-007603022105 washer a cop, em6290b-0259972048 o ring, em6290b-200835008005 stud, em6290b-304017008079 screw, em6290b-5100850060 piston ring, em6290b-5110251976 washer, em6290b-5119940041 ring snap, em6290b-5132155 seal ring, em6290b-5240110159 carbon scrapper ring, em6290b-5240500930 push rod, em6290b-5240530830 valve guide, em6290b-5240530905 valve exhaust std floating bridge, em6290b-5240531101 valve intake std floating bridge, em6290b-5240550320 bolt adjusting, em6290b-5240550550 bushing, em6290b-5240900850 fuel delivery pump, em6290b-5241870147 pate, em6290b-5249970545 sealing ring, em6290b-5261400026 shaft, em6290b-5410180233 diaphgarm, em6290b-5501871180 gasket, em6290b-5552032880 gasket, em6290b-5589900163 flow restrictor, em6290b-700327028000 grommet, em6290b-700429011002 o ring, em6290b-700429012002 o ring, em6290b-700429021001 o ring, em6290b-700429027001 o ring, em6290b-700429028005 o ring, em6290b-700429032003 o ring, em6290b-700429033001 o ring, em6290b-700429035000 o ring, em6290b-700429039000 o ring 39 2x3, em6290b-700429075002 o ring, em6290b-700429172000 o ring, em6290b-700429175001 o ring, em6290b-700429200002 o-ring, em6290b-700429418000 o ring, em6290b-700429420000 o ring, em6290b-7603014102 sealing ring, em6290b-7603018101 washer a cop, em6290b-8699930063 dished washer, em6290b-8699970005 gasket, em6290b-8699970154 adhesive, em6290b-915006006000 straight connector, em6290b-934010005 hex nut, em6290b-x00010428 washer, em6290b-x00040625 cover for solars, em6299b-25405497 4 by 2 way valve, em6299b-xp52717300088 repair kit, em6290b-007603017102 ring sealing a17x21, em6290b-007603018104 sealing ring, em6290b-0472068000 ring snap, em6290b-200433010500 washer, em6290b-206796016000 cynical spr washer, em6290b-304017010051 hex screw, em6290b-49978190 clamp, em6290b-5240160321 gasket, em6290b-5240701433 tube asm cyl head fuel return, em6290b-5240780047 adapter, em6290b-5261420060 flange sealing, em6290b-5304334 ground strap, em6290b-5319970345 sealing ring for set w6, em6290b-5359930020 spring torsion, em6290b-5590981750 flange, em6290b-700223006000 benjo screw, em6290b-700327006000 grommet 6, em6290b-700327008000 grommet, em6290b-700368042004 rubber sleeve 42x100, em6290b-700429023002 o-ring for set w5, em6290b-700429028002 o ring 28x4, em6290b-700429055001 o ring, em6290b-700429060002 o-ring 60x4 for set w5, em6290b-700429070000 o ring, em6290b-700429110000 o-ring for set w5, em6290b-700429185001 o ring, em6290b-735080010200 regulator fuel retur n 0 point 5 bar, em6290b-735080018200 valve check 0 point2 bar rhdk 18-l 0 point 2, em6290b-735080018202 check valve, em6290b-735211012000 union, em6290b-7603010110 washer a cop, em6290b-7603012111 washer a cop, em6290b-7603026104 washer a cop s2000 by 4000, em6290b-7603030101 washer a cop, em6290b-7603045101 washer a cop, em6290b-7603052101 washer a cop, em6290b-8595860330 repair kit, em6290b-8691710010 sealing ring, em6290b-8695860599 repair kit, em6290b-ex52403500019 vibration damper, em6290b-x00042774 pipe, em6290b-x00042803 servo-locker, em6290b-xp52725100119 parts kit, em6290b-xp52725100120 spare parts kit, em6299b-xp59408300034 filter cartridge, em6299b-xp59408300095 filter element, em6290b-5260900009 cylinder, em6290b-5272010401 volute, em6290b-5330280 o ring 11 point 3x2 point 2, em6290b-700429025001 o ring 26 x 2 point 5 mmn 294, em6290b-700429042000 o ring, em6290b-700429083000 o ring, em6299b-xp52800600016 repair kit, em6299b-xp52899100719 basic body, em6290b-5360980218 actuating cylinder, em6290b-7603014103 washer a, em6290b-7603016105 washer a cop, em6290b-934008008 hex nut, em6299b-x52820400001 cooler plate b, em6299b-x52820400002 cooler plate version c, em6299b-x00041552 cooler plate a version, em6299b-x00014409 gasket, em6299b-x00034972 stop, em6299b-xp52707700004 snap ring, em6299b-xp52707700005 o-ring, em6299b-xp52707700010 o-ring, em6299b-x56912300043 actuating cylinder, additional charges
Agency / Dept :
integrated defence staff IDS
Due Date :
Jun 24, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Adapter Scrap. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Adapter Scrap sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Adapter Scrap Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Adapter Scrap, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Adapter Scrap Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Adapter Scrap Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Adapter Scrap.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Adapter Scrap depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Adapter Scrap Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Adapter Scrap bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Adapter Scrap. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Adapter Scrap, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Adapter Scrap, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Adapter Scrap?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Adapter Scrap tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Adapter Scrap?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Adapter Scrap, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Adapter Scrap is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All