Filters By:

T18 Ref No
Keyword
State
City
Agency
Tender ID
Due Date
Tender Source
Tender Type

6Results forLatest Wall timber Tenders List

Latest Wall timber Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Wall timber tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Wall timber tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Wall timber Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Wall timber tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Wall timber Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Wall timber Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Wall timber Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Wall timber tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Wall timber Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Wall timber sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Wall timber tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Wall timber tenders.

Is EMD mandatory for all Wall timber tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Wall timber work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Wall timber tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Wall timber Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 15999322
live Tender
Source : GEM Tenders
live Tender

tender for billing of quantity bib tap cast copper alloy brass 15mmdia , seat cover plastic white for evc with hinges , decorative rod 20 or 25mm dia x 3 mtr , 600 mm connection pipe with nuts , stop valve cast copper 15 mm dia , bib cock cp 15 mm dia with flange , pvc low level flushing cistern with complete accessories 10 litre capacity , pvc mirror cabinet of size n exc 450mm in width n exc 550 mm in length 100mm thick with suitable pvc dooe shutter and 5mm thick front looking , cp grating 100 mm dia isi marked m , decorative brackets for drapery rods , cp jet spray 450mm long for 15mm dia , cp health foucet with 1mm flexible tube , shower rose cp 125 mm , angle cock cp 15 mm dia with flange , pillar cock cp medium weight fancy type of 15 mm , floor door stopper of aluminium 140 mm , aluminium anodised curtain rod 20mm dia 3 mtr long , cp grating 125 mm isi marked , waste coupling 40 mm cp for stainless steel kitchen sink , pvc waste pipe for urinal 32 mm dia , aluminium anodised bow handle 150 mm long , aluminium anodised tower bolt 200mm , aluminium anodised tower bolt 150mm , aluminium bracket 20mm curtain rod tubing t and l type , hydraulic door closer brass type , nails wire 1inch , nails wire one and half inch , nails two inch , nails two and half inch , nails 3 inch , pannel pin 15 mm , pannel pin 20 mm , ss plate rack 24inch x 30 inch , ss plate rack 30 inch x36 inch , cp nipple 1 inch , cp nipple one and half inch , cp nipple two inch , self screw 1 inch , self screw one and half inch , self screw 2 inch , self screw 4 inch , splindle for concealed stop cock , splindle for bib cock , washer , sink coupling 3 inch , sink coupling 4 inch , waste pipe for sink 32mm , waste pipe for hand wash basin , cp sink cock , ss overhead shower , cp long body bib tap , bib cock 2 in 1 , two way bib cock 15mm , angle cp cock 2 in 1 , butt hings ms 100mm , aluminium anodised aldrop bolt 300mm , hasp and staple 100 mm , alloy butt hings 100mm , tephlon tape , sink coupling 32 mm , looking mirror 24x16 inch , looking mirror 24x24 inch , ss jet spray with 1 mtr tube , soap dish , toilet paper holder with flap , tower rack 24 inch , towel ring round type , cp or ss grating 100 round , cp or ss grating 150 or 125 mm round , cp or ss grating with hole 100 round , cp or ss grating with hole 150 or 125mm round , glass shelf corner , glass shelf 15 or 18 inch long , cp extension nipple length 1 inch size half inch , cp extension nipple length one inch size half inch , cp or brass shower rose 75 mm or 100 mm , cp or brass shower rose 100 mm or 150mm , wall grip 8 nos , wall grip 10 nos , crack seal paint 360 grm , cpvc fitting tee 1 , cpvc fitting elbow 1 , cpvc fitting socket 1 , cpvc fitting socket 3 or 4 , cpvc fitting union socket 1 , cpvc fitting union socket 3 or 4 , cpvc fitting brass elbow 3 or 4 , cpvc fitting mta 1 , cpvc fitting mta 3 or 4 , cpvc fitting fta 1 , cpvc fitting fta 3 or 4 , aluminium wire mesh 4 feet , snake guard 4 feet long , door stopper 140 mm make , door stopper 140 mm brass coated moduler , sliding bolt 150mm , sliding bolt 200mm , door hings 75mm , door hings 100mm , door hings 150mm , tower bolt 75mm , tower bolt 100mm , tower bolt 150mm , tower bolt 200mm , curtain rods 3.60 mtr lenght 25mm dia , curtain brackets normal , door bandle aluminium 150mm , pvc acrylic sheet size 8 feet x 5mm , aluminium window handle right or left , cp wall mixture , cp sink mixture , solvent cement , silicon with gun , measuring tap 30 meter long , measuring tap 5 meter long , knob drawer 25 mm brass , fevicol special repair 098 , self taping 35 mm isi marked , self taping 35 mm 25 mm isi marked , screw wood 20 mm isi marked , french polish in 1 ltr pack , hinges 75mm , thinner , synthetic enamel paint black colour 1 st quality in 1 ltr pack , sand paper no 100 , tapping screw wood 20mm , nail 2 inch , varnish in 1 litre container , touch wood paint 1 litre container , sand paper no 80 , nails wire 1 inch , nails wire 1 and half inch , nails wire 2 inch , nails wire 2 and half inch , sand paper no 60 , synthetic enamel paint white colour 1 st quality in 1 ltr pack , sand paper no 200 , sand paper no 40 , cp knob 40mm , paint brush 25 mm , plywood 2400 x 1200 x 12 mm bwr , plywood 2400 x 1200 x 6 mm bwr , timber beeding 200 mm x 15 mm , pannel pin 20 mm , pannel pin 15 mm , plywood 4mmx 8 ft x 4ft x 4mm one side teak face , paint brush 75 mm , pre laminated particle board 8ft x 4ft x18 or 19mm exterior grade , pre laminated particle board 8ft x4ft x9 mm exterior grade , grinder paper 5 inch , blade wood cutter 4 inch , haxo blade both side , slip taper file , wall gits 5mm , wooden gits 5mm , driver bit 65mm , hook for hanging hat, cloth , cushion for sofa 21 inch x 22 inch x 4mm density 40 with cover of tapestry cloth not stched one, bib tap cast copper alloy brass 15mmdia, seat cover plastic white for evc with hinges, decorative rod 20 or 25mm dia x 3 mtr, 600 mm connection pipe with nuts, stop valve cast copper 15 mm dia, bib cock cp 15 mm dia with flange, pvc low level flushing cistern with complete accessories 10 litre capacity, pvc mirror cabinet of size n exc 450mm in width n exc 550 mm in length 100mm thick with suitable pvc dooe shutter and 5mm thick front looking, cp grating 100 mm dia isi marked m, decorative brackets for drapery rods, cp jet spray 450mm long for 15mm dia, cp health foucet with 1mm flexible tube, shower rose cp 125 mm, angle cock cp 15 mm dia with flange, pillar cock cp medium weight fancy type of 15 mm, floor door stopper of aluminium 140 mm, aluminium anodised curtain rod 20mm dia 3 mtr long, cp grating 125 mm isi marked, waste coupling 40 mm cp for stainless steel kitchen sink, pvc waste pipe for urinal 32 mm dia, aluminium anodised bow handle 150 mm long, aluminium anodised tower bolt 200mm, aluminium anodised tower bolt 150mm, aluminium bracket 20mm curtain rod tubing t and l type, hydraulic door closer brass type, nails wire 1inch, nails wire one and half inch, nails two inch, nails two and half inch, nails 3 inch, pannel pin 15 mm, pannel pin 20 mm, ss plate rack 24inch x 30 inch, ss plate rack 30 inch x36 inch, cp nipple 1 inch, cp nipple one and half inch, cp nipple two inch, self screw 1 inch, self screw one and half inch, self screw 2 inch, self screw 4 inch, splindle for concealed stop cock, splindle for bib cock, washer, sink coupling 3 inch, sink coupling 4 inch, waste pipe for sink 32mm, waste pipe for hand wash basin, cp sink cock, ss overhead shower, cp long body bib tap, bib cock 2 in 1, two way bib cock 15mm, angle cp cock 2 in 1, butt hings ms 100mm, aluminium anodised aldrop bolt 300mm, hasp and staple 100 mm, alloy butt hings 100mm, tephlon tape, sink coupling 32 mm, looking mirror 24x16 inch, looking mirror 24x24 inch, ss jet spray with 1 mtr tube, soap dish, toilet paper holder with flap, tower rack 24 inch, towel ring round type, cp or ss grating 100 round, cp or ss grating 150 or 125 mm round, cp or ss grating with hole 100 round, cp or ss grating with hole 150 or 125mm round, glass shelf corner, glass shelf 15 or 18 inch long, cp extension nipple length 1 inch size half inch, cp extension nipple length one inch size half inch, cp or brass shower rose 75 mm or 100 mm, cp or brass shower rose 100 mm or 150mm, wall grip 8 nos, wall grip 10 nos, crack seal paint 360 grm, cpvc fitting tee 1, cpvc fitting elbow 1, cpvc fitting socket 1, cpvc fitting socket 3 or 4, cpvc fitting union socket 1, cpvc fitting union socket 3 or 4, cpvc fitting brass elbow 3 or 4, cpvc fitting mta 1, cpvc fitting mta 3 or 4, cpvc fitting fta 1, cpvc fitting fta 3 or 4, aluminium wire mesh 4 feet, snake guard 4 feet long, door stopper 140 mm make, door stopper 140 mm brass coated moduler, sliding bolt 150mm, sliding bolt 200mm, door hings 75mm, door hings 100mm, door hings 150mm, tower bolt 75mm, tower bolt 100mm, tower bolt 150mm, tower bolt 200mm, curtain rods 3.60 mtr lenght 25mm dia, curtain brackets normal, door bandle aluminium 150mm, pvc acrylic sheet size 8 feet x 5mm, aluminium window handle right or left, cp wall mixture, cp sink mixture, solvent cement, silicon with gun, measuring tap 30 meter long, measuring tap 5 meter long, knob drawer 25 mm brass, fevicol special repair 098, self taping 35 mm isi marked, self taping 35 mm 25 mm isi marked, screw wood 20 mm isi marked, french polish in 1 ltr pack, hinges 75mm, thinner, synthetic enamel paint black colour 1 st quality in 1 ltr pack, sand paper no 100, tapping screw wood 20mm, nail 2 inch, varnish in 1 litre container, touch wood paint 1 litre container, sand paper no 80, nails wire 1 inch, nails wire 1 and half inch, nails wire 2 inch, nails wire 2 and half inch, sand paper no 60, synthetic enamel paint white colour 1 st quality in 1 ltr pack, sand paper no 200, sand paper no 40, cp knob 40mm, paint brush 25 mm, plywood 2400 x 1200 x 12 mm bwr, plywood 2400 x 1200 x 6 mm bwr, timber beeding 200 mm x 15 mm, pannel pin 20 mm, pannel pin 15 mm, plywood 4mmx 8 ft x 4ft x 4mm one side teak face, paint brush 75 mm, pre laminated particle board 8ft x 4ft x18 or 19mm exterior grade, pre laminated particle board 8ft x4ft x9 mm exterior grade, grinder paper 5 inch, blade wood cutter 4 inch, haxo blade both side, slip taper file, wall gits 5mm, wooden gits 5mm, driver bit 65mm, hook for hanging hat, cloth, cushion for sofa 21 inch x 22 inch x 4mm density 40 with cover of tapestry cloth not stched one side


Agency / Dept : indian army
Tender Value : 5424897
Due Date : Jul 16, 2026
T18 Ref No : 16113161
live Tender
live Tender

auction or scrap of lot no - 1 lot name - alloy steel turning & boring product type - miscellaneous category - miscellaneous items - 0.0 alloy steel turning & boring - 144000 kg item cd :9926781372 hsn code :72044100 | lot no - 2 lot name - al.alloy swarf turning/boring product type - miscellaneous category - miscellaneous items - 0.0 al.alloy swarf turning/borin g - 36000 kg item cd :0699801800 hsn code :76020010 | lot no - 3 lot name - steel- end pieces and rejected components product type - miscellaneous category - miscellaneous items - 0.0 steel-end pieces and rejected components - 7000 kg item cd :9926781373 hsn code :72042110 | lot no - 4 lot name - al. alloy end pieces & rej. components product type - miscellaneous category - miscellaneous items - 0.0 al. alloy end pieces & rej. components - 1900 kg item cd :0699711100 hsn code :76020090 | lot no - 5 lot name - steel scrap - s product type - miscellaneous category - miscellaneous items - 0.0 steel scrap - s - 500 kg item cd :0499199991 hsn code :7204 | lot no - 6 lot name - al.alloy end pieces dtd 5124 & rejected components product type - miscellaneous category - miscellaneous items - 0.0 al.alloy end pieces dtd 5124 & rejected components - 600 kg item cd :0699801100 hsn code :76020090 | lot no - 7 lot name - used unserviceable chlorinated solvents product type - miscellaneous category - miscellaneous items - 0.0 used unserviceabl e chlorinated solvents - 4000 kg item cd :1035706120 hsn code :29032200 | lot no - 8 lot name - paint sludge generated through painting product type - miscellaneous category - miscellaneous items - 0.0 pcb group - paint & ink sludge / residue paint sludge generated through painting - 2500 kg item cd :9926700426 hsn code :3209 | lot no - 9 lot name - mixed mild steel scrap product type - miscellaneous category - miscellaneous items - 0.0 mixed mild steel scrap - 10000 kg item cd :0499199091 hsn code :7204 | lot no - 10 lot name - timber scrap from unused packing boxes. product type - miscellaneous category - miscellaneous items - 0.0 timber scrap from unused packing boxes. - 10000 kg item cd :2289354004 hsn code :44151000 | lot no - 11 lot name - electrical scrap miscellaneous product type - electrical items category - others - electrical items pcb group - e- waste-rule 2022 electrical scrap miscellaneou s - 1400 kg item cd :0599267006 hsn code :85493100 | lot no - 12 lot name - unserviceable assorted used toners product type - miscellaneous category - miscellaneous items - 0.0 unserviceabl e assorted used toners - 1250 nos item cd :2567188130 hsn code :8443 | lot no - 13 lot name - incandescent lamps - unserviceable product type - miscellaneous category - miscellaneous items - 0.0 pcb group - e- waste-rule 2022 incandescent lamps - unserviceabl e - 2785 nos item cd :1522194042 hsn code :8539 | lot no - 14 lot name - empty barrels 200/205/210 ltr cap. product type - miscellaneous category - miscellaneous items - 0.0 empty barrels 200/205/210 ltr cap. - 115 nos item cd :1432531205 hsn code :39233090 | lot no - 15 lot name - plastic scrap product type - miscellaneous category - miscellaneous items - 0.0 plastic scrap - 1300 kg item cd :9926790068 hsn code :39159042 | lot no - 16 lot name - barrel plastic/hdp 200 lit.capacity product type - miscellaneous category - miscellaneous items - 0.0 barrel plastic/hdp 200 lit.capacity - 70 nos item cd :1432431210 hsn code :3923 | lot no - 17 lot name - tube light fused- unserviceable product type - miscellaneous category - miscellaneous items - 0.0 pcb group - e- waste-rule 2022 tube light fused- unserviceabl e - 11260 nos item cd :1522194037 hsn code :7001 | lot no - 18 lot name - battery pack- unserviceable product type - electrical items category - battery - 0.0 pcb group - used batteries/lead acid batteries/lead acid cells & lead scrap battery pack- unserviceabl e - 63 nos item cd :2567188122 hsn code :854810 | lot no - 19 lot name - used unserviceable coolant product type - petroleum products category - used/ waste oil - 0.0 pcb group - used spent/burnt oil/used lube oil/used engine oil used unserviceabl e coolant - 2000 litre item cd :1035700183 hsn code :3820 | lot no - 20 lot name - cable assorted, unserviceable product type - miscellaneous category - miscellaneous items - 0.0 cable assorted, unserviceabl e - 113.5 kg item cd :1522194040 hsn code :74040012 | lot no - 21 lot name - nylon swarf of t&b from db & cb product type - miscellaneous category - miscellaneous items - 0.0 nylon swarf of t&b from db & cb - 700 kg item cd :9926780533 hsn code :39159021 | lot no - 22 lot name - unserviceable varnish,hardene r,etc product type - miscellaneous category - miscellaneous items - 0.0 unserviceabl e varnish,hard ener,etc(life expired)with container - 200 kg item cd :1035706124 hsn code :3210 | lot no - 23 lot name - nylon rejected blanks product type - miscellaneous category - miscellaneous items - 0.0 nylon rejected blanks - 900 kg item cd :9926780532 hsn code :39159021 | lot no - 24 lot name - used alumina powder product type - miscellaneous category - miscellaneous items - 0.0 used alumina powder - 1000 kg item cd :2567556097 hsn code :7603 | lot no - 25 lot name - used lubricating oil product type - petroleum products category - used/ waste oil - 0.0 pcb group - used spent/burnt oil/used lube oil/used engine oil used lubricating oil - 190 litre item cd :1035700178 hsn code :34039900 | lot no - 26 lot name - unserviceable rubber solution product type - miscellaneous category - miscellaneous items - 0.0 unserviceabl e rubber solution(life expired)with container (jrtv) - 67.5 kg item cd :1035706123 hsn code :40170020 | lot no - 27 lot name - used / oil soaked wood saw dust product type - miscellaneous category - miscellaneous items - 0.0 used / oil soaked wood saw dust - 480 kg item cd :2287359001 hsn code :44014000 | lot no - 28 lot name - used alumina bricks- broken condition product type - miscellaneous category - miscellaneous items - 0.0 used alumina bricks- broken condition - 700 kg item cd :2567556098 hsn code :28182010 | lot no - 29 lot name - unserviceable paints(life expired/sediment ed)with container product type - miscellaneous category - miscellaneous items - 0.0 pcb group - paint & ink sludge / residue unserviceabl e paints(life expired/sedim ented)with container - 390 kg item cd :1035706122 hsn code :7902 | lot no - 30 lot name - bi- cycles 22" green colour- unserviceable product type - miscellaneous category - miscellaneous items - 0.0 bi-cycles 22 green colour- unserviceabl e - 4 nos item cd :2567556076 hsn code :871200 | lot no - 31 lot name - unserviceable adhesives(life expired) with container product type - miscellaneous category - miscellaneous items - 0.0 pcb group - paint & ink sludge / residue unserviceabl e adhesives(life expired) with container - 200 kg item cd :1035706125 hsn code :4017 | lot no - 32 lot name - unusable rubber scrap product type - miscellaneous category - miscellaneous items - 0.0 unusable rubber scrap - 70.8 kg item cd :9926780543 hsn code :400400 | lot no - 33 lot name - unserviceable ceiling fans/wall product type - miscellaneous category - miscellaneous items - 0.0 unserviceabl e ceiling fans/wall - 60 kg item cd :0599267013 hsn code :85439090 | lot no - 34 lot name - used / oil soaked cotton/banian waste product type - miscellaneous category - miscellaneous items - 0.0 used / oil soaked cotton/bania n waste - 250 kg item cd :2567556096 hsn code :520210 | lot no - 35 lot name - used hydraulic oil servo system 32/46/68 product type - petroleum products category - used/ waste oil - 0.0 pcb group - used spent/burnt oil/used lube oil/used engine oil used hydraulic oil servo system 32/46/68 - 200 litre item cd :1035700169 hsn code :8410 | lot no - 36 lot name - unserviceable battery of sorts product type - electrical items category - battery - 0.0 pcb group - used batteries/lead acid batteries/lead acid cells & lead scrap unserviceabl e battery of sorts - 34 kg item cd :1583309971 hsn code :8548 | lot no - 37 lot name - unserviceable miscellaneous scrap product type - miscellaneous category - miscellaneous items - 0.0 unserviceable miscellaneous scrap - 1 lot item cd : hsn code :72044900


Tender Value : 0
Due Date : Jul 21, 2026
T18 Ref No : 16226683
live Tender
Source : GEM Tenders
live Tender

tender for almirah large steel 1 by 2 hanging 1 by 2 shelving , mattress for king size bed , side board , chair plastic ornate , charpoy ip with hard top , shoe rack wooden double door , table center two tier , table writing , chair dining long back and cushion , table center with glass top , table dining 4 pers , sofa set 5 seater with cushion , sofa set 4 seater , table dressing ladies including stool , peg table with glass top , teapoy , locker bed side steel , rack adjustable 6 tier steel , hat stand with mirror , chair writing , table dining round shape with 4 chair t wood , chair d man , receptacle pvc , chair computer , bin linen multipurpose , chair visitors , hot case large , chair cushioned with arms , table office wooden , table office officer , bed hard , almirah small steel with shelves , book case , chair verandah , chair easy , chair dining , chair school with hand board , durries 24 feet x 15 , rack shoe steel , rack single 2745 x 760 x 1905 mm , sofa set 5 seater , peg table , tv trolly , trestle store room steel , table dining six pers , table dining eight pers, replacement of ber furniture for the qe jun 2025 and qe sep 2025 under ge haddo sri vijaya puram, all as shown on drawing. overall size shall 920mm long 485mm wide and 1985mm high. the base shall be 100mm high. the base shall be made of two numbers mild steel sheet channels shape with ends covered and welded to bottom of almirah. mild steel sheet for channel shall be 1mm thick. the base channel shall be welded at 50mm from each end of 920mm length. top comma sides comma back comma bottom and front of almirah shall be 1mm thick mild steel sheet. two shelves shall be provided at 350mm and 700mm from bottom of almirah. ahan ging rod 60mm from top shall be provided which shall be of 20mm dia steel chromium plated conduit pipe of wall thickness 1 point 25mm. two sockets shall be provided at the end of hanging rod. front shutters shall have two leaves. a steel chromium plated handle 100mm long shall provided to shutters. a three way locking device shall be provided to front shutters. each leaf of front shutter shall be hinged with three nubers butt hinges 75mm long and shutters shall be side hung. all joints and welding comma fixing shall be done with standard workmanship. all hung. all joints and welding comma fixing shall be done with standard workmanship. the almirah shall be finished dry powder coated in double shade different colour after properly smoothening the surface or as approved by ge both internaly and externaly. rest all as specified oblique shown in drawing and directed by enginer in charge., the overall of size of mattress 78 inch x 72 inch x 8 inch. the matress shall be made of natural latex and cool foam reinforced by each other by press mechanism.the tapestry used in the matress shall be of best quality. the pilllow shall be of size 600mmx300mm filled with white reckon fibre and covered with best quality cotton fabric in desired shape and bedsheet size of 9 feet x 8 feet long best quality cotton colour approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., oveall size shall be 1220mm long comma 455mm wide and 760mm high. body of the side board comma shelves comma drawers comma shutters shall be made of 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge. back of side board shall be 12 mm thick plywood. sides comma back and bottom of drawers shall be of 18 mm thick mdf board bothside laminated. top drawer shall be given 5 comportment in equidistant space in front portion and one comportment in remaining portion. 4mm thick teak wood edging shall be provided to all edges of mdf board. ss handle and ss knobs as approved by ge shall be provided for shutter and drawers. drawers shall be supported with telescopic channel for smooth functioning. 75 mm high skirting shall be provided by 19 mm thick teak wood as shown in drawing. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer-in-charge., as per trade pattern and directed by enginer in charge, long and short rails of bed shall be 65 x 25 mm 16 gauge rectangle ms tube.stifners shall be 25 mm 16 gauge square ms pipe. legs shall be 32 mm 16 gauge square ms pipe and welded properly at joints to make the charpoy. 25 x 60 x 6 mm cleats be welded with short rails inner side to support the plywood. 12 mm thick ply wood bwr type unpolished shall be provided to the top of charpoy screwed with cleat and stiffners by nut and washers. all steel members shall be finshed with two coats of synthetic enamel paint to obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper in black colour. rest all as specified oblique shown in drawing and directed by enginer in charge., as per trade pattern and directed by enginer in charge., overall size shall be 900mm long comma 450mm wide and 400mm high. all wood shall be of teak wood. top of the table shall be provided with 12 mm thick glass of approved shade. legs shall be made out of 60mmx30mm in section teak wood and 356 mm high. bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. the bottom tier shall be fixed on the top of bottom side rails with 50mm long screwss. the bottom tier shall be 12 mm thick glass of approved shade. 25mm dia hard rubber oblique pvc rings shall be fixed to the bottom of all legs fixed with 30mm long screws. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200 mm high. all timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be of size 25mmx50mm in section and 450mm high and rear legs shall be of section 65mmx50mm made to shape as shown on drg. the front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. the top of side rails shall be at 450 mm from bottom of legs. two side stiffeners of 25 mm x 40 mm in section shall beprovided joining front and rear legs. the bottom side stiffeners shall be 100 mmabove the bottom of legs. a middle stiffener of 25 mm x 40 mm in section joining the side stiffeners in middle shall be provided as shown on drg. for seat cushion comma a frame shall be made with 75 mm x 20 mm in section front and rear wooden horizontal rails comma joined by 40 mm 20 mm in section wooden side rails. 70 mm x 10 mm batten shall be provided in the middle. 45 mm x 10 mm batten shall be provided with three equal gaps. 50 mm thick comma 32 density foam shall be provided to the chair which shall be covered with leatherised rexine of best quality as approved by ge. the back rest the shape of legs shall be as shown on drg. rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical and 12mm dia teak wood in horizontal. back shall have vertical battens 20mmx25mm in section. 50mm thick synthetic foam of 32 density covered with leatheised rexene made to shape as shown on drg shall be fixed over 10mm thick plywood commercial. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., overall size shall be 1200mm long comma 600mm wide and 400mm high. legs shall be of 40mm dia anodized brass legs comma four in number in one piece. the legs shall be joined in short and long sides with two number 25mm dia brass pipes of wall thickness 2mm. the top pipe shall be fixed 150mm from top and the lower pipe shall be at 100 from bottom of top pipe the brass frame shall be 900mm long and 450mm wide. vaacuum rubber shall be provided at top of legs comma which shall be closed with brass sheet 1 point 6mm thick. the bottom of legs shall be covered with brass sheet of 1 point 6mm thick sheet. the bottom of legs shall have pvc shoes. the top shall be provided with 12 mm thick glass of approved shade with corners rounded as shown drawing comma the edges of top of table shall be rounded off. rest all as specified oblique shown in drawing and directed by enginer in charge., all wooden part shall be first class seasoned teak wood free from knots and defects. hard rubber oblique nylon buffers shall be fixed at the bottom of legs with brass screws, top shall be 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge comma duly fixed with 4mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh 8 nos of l shape corner of flat iron 5mm thick 4 inch x 4 inch between legs and rail to be fixed with screw. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., the set consist of one long piece of three seater and two small pieces of single seater. all timber work shall be first class seasoned teak wood free from knots oblique defects. cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth not less than rs 500 by mtr composition of 65 percentage polyester and 35 percentage cotton or as approved by ge. all the wooden joints shall be fixed with bamboo pins and nails shall not be used. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge., the set consist of one long piece of two seater and two small pieces of single seater. all timber work shall be first class seasoned teak wood free from knots oblique defects. cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth not less than rs 500 by mtr composition of 65 percentage polyester and 35 percentage cotton or as approved by ge. all the wooden joints shall be fixed with bamboo pins and nails shall not be used. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., the body of table and stool shall be 18m thick exterior grade pre laminated mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. drawers shall be supported with telescopic ball bearing channel for smooth functioning. shutter shallbe fixed with ss piano hinges and magnetic catcher. mirror frame shall be first class teak wood free from knots and defects. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, overall size shall be 450mm long comma 300mm wide and 380mm high. legs shall be of first class teak wood of section 30mmx50mm. the legs shall be 362mm high. 5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position. two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs. two bottom rails of size 20mmx40mm shall be fixed between the legs. a centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg. vaacuum rubber shall be provided at top of legs. the top shall be 12mm thick plate tinted glass white colour with corners rounded as shown drawing comma the edges of top of table shall be rounded off. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, the leg shall be 60mm x 30mm in section and 497 mm high and shall be of teak wood 5mm x 5mm in section groove shall be provided at the visible portion of the top of legs. top rail of first class teak wood of 20mm x 50mm in section and 510mm long shall be provided between the legs bottom rail of teak wood of 20mm x 50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. a centre rail of size 20mm x 50mm shal also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg 25mm thick and 25mm dia hard rubber pvc rings shall be fixed to the bottom of all legs fixed with 30 mm long screws. top of the table shall be of 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge comma with 4mm thick teak wood beading all round the edges of top. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., 1mm thick ms sheet shall be used to manufacture locker except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 point 25 mm thick ms sheet. cromium plated stainless steel godrej type handle 100mm long shall be fixed on shutters comma locker shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. locker shall be finished with shade of ta gray colour or as approved ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper. rest all as specified shown in drawing and directed by enginer in charge, over all size shall be 915mm long comma 305 mm wide and 1905mm high. frame shall be 40x40x5mm slotted angle iron fixed with nut bolts irrespective of shown in drawing.shelf shall be 1mm thick crca sheet with bottom support of 15x15x3mm angle iron. all steel surface shall be finished with shade of ta gray colour or as approved by ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as per drawing and directed by engineer in charge., overall size shall be 1330 mm long comma 710mm high. the inner frame shall be of 50mmx20mm teak wood battens six in nos . the back and front of frame shall be covered with 6mm thick commercial ply. the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive. six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg. 5mm thick looking mirror shall be provided as shown on drg with beading alround . mild steel key plate shall be provided at both top corners of the hat stand. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces . all steel surfaces shall be painted with two coats of enamel paint over a coat of primer. rest all as per drawing and directed by engineer in charge., the frame of the chair shall be of 16 gauge 25mm dia ms tubular frame powder coated. back shall be designed with contoured lumber support for extra comfort. 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with pvc lippling alround shall be provided at seat and back. arm rest shall be of black integral skin poly urethane with shore a hardness and reinforced with ms insert. it shall be scratch and wheather resistant. both hand rest section shall have inner and outer dia of 210mm and 230mm respectively and have slope towards front. rest all as specified shown in drawing and directed by engineer in charge., table dining round shape 1200mm comma high 760mm shall be first class seasoned teak wood free from knots and defects. hard rubber oblique nylon buffers shall be fixed at the bottom of 04 legs of 30x40mm with brass screws comma top shall be 18 mm thick teak wood with12mm thick glass top. chair dining long back and cushion overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200 mm high. all timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be of size 25mmx50mm in section and 450mm high and rear legs shall be of section 65mmx50mm made to shape. the front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. the top of side rails shall be at 450 mm from bottom of legs. two side stiffeners of 25 mm x 40 mm in section shall beprovided joining front and rear legs. the bottom side stiffeners shall be 100 mm above the bottom of legs. a middle stiffener of 25 mm x 40 mm in section joining the side stiffeners in middle shall be provided as shown on drg. for seat cushion comma a frame shall be made with 75 mm x 20 mm in section front and rear wooden horizontal rails comma joined by 40 mm 20 mm in section wooden side rails. 70mmx 10mm batten shall be provided in the middle. 45 mm x 10 mm batten shall be provided with three equal gaps. 50 mm thick comma 32 density foam shall be provided to the chair which shall be covered with leatherised rexine tapestry cloth not less than rs 500 by mtr of best quality as approved by ge. rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical and 12mm dia teak wood in horizontal. back shall have vertical battens 20mmx25mm in section., overall size shall be 470mm wide comma 445mm deep and 1040mm high. tall timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be 50x50mm at top and 40x40mm at bottom. rear legs shall be 95x50mm. the seat of the chair shall be woven in godrej pattern with 2mm wide 0 point 25mm thick best quality cane. all diamensions comma shape and size shall be followed as per drg. all joints comma fixing shallbe done in accordance with standard specifications. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge, as per trade pattern and directed by enginer in charge, body of the bin linen multipurpose comma shelves comma drawers comma shutters shall be made of 19mm thick exterior grade mdf board both side laminated. shade as approved by ge back shall be 12mm thick plywood sides back and bottom of drawers shall be of 12mm thick mdf board bothside laminated shade as approved by ge. 4mm thick teak wood edgig shall be provided to all edges of mdf board. ss handle and ss knobs as approved by ge shall be approved for shutter and drawers. drawers shall be supported with telescopic channel for smooth functioning 75mm high skirting shall be provided by 19mm thick teak wood as shown in drawing. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., as per trade pattern and directed by enginer-in-charge., top shall be made of teak wood with size of legs as 45mmx45mm at top and 30mmx30mm side stiffners of size 40x19mm. the top portion shall have be provided with teak wood frame made of 74mmx19mm batterns frame as shown in drg. the bottom of top frame shall be provided with asbestos sheet plain. the two shleeves fitted inside the hot case shall be made of 4mm dia wire mess welded to 12x3mm flat iron frame as shown. the inner sides/shutters including top and bottom of hot case shall be fitted with aluminium sheet lining allround. the shutters shall be fixed with aluminium hinges and each shutter shall be provided with dimentions comma shape and size shall be followed as per drg. all joints fixing shall be done in accordance with standard specification. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., as per trade patern and directed by enginer in charge., as per trade patern and directed by enginer in charge, as per trade patern and directed by enginer-in-charge, all steel member shall be 18 gauge ms pipe. the frame of head board and foot board shall be of 38mm ms square pipe. 18mm ms square pipe shall be provided in the inner of head or foot board frame as shown in drg. 18mm thick both side prelaminated mdf board of walnut shade with 4mm thick teakwood beading shall be screwed to ms strip arc welded with 18mm thick square pipe with standard workmanship both in head/foot board. one stiffener of size 25mmx25mm shall be welded between the two legs of head board over 150mm from the ground level. the top of bed hard shall be of 12mm thick bwr grade plywood of approved make fixed over the four equidistant stiffener of size 25mmx25mm sq ms pipe in line with bottom of 25x65mm long rail section. pvc shoes shall be provided to legs of bed. all steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. rest all as per drawing., overall size shall be 1270mm high comma 765mm wide and 440mm deep. 1mm thick ms sheet shall be used to manufacture almirah except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 comma 25 mm thick ms sheet. cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma almirah shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. the almirah shall be finished dry powder coated in double shade different colour after properly smoothening the surface or as approved by ge both internaly and externaly. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be 1230mm long. 300mm wide and 760mm high. all wood shall be of first class teak wood . the legs shall be made to shape out of 50mmx100mm teak wood. the legs shall be 100mm high. the two long rails of 50mmx50mm in section and 1230mm long shall be provided for support of body of book case. the two long rails shall be joined with 25mmx50mm stiffeners at 150mm from each end joining the long rails. 19mm thick pre laminated mdf board shall be provided at bottom comma top comma sides shelves and vertical partitions. the back shall be of 6mm thick ply wood. the top comma shelves comma bottom and vertical partitions shall have 1 comma 5mm plastic laminated sheet fixed over the mdf board. the vertical partition shall have plastic laminated sheet on both sides. the shelves shall have plastic laminated sheet on top only. the top and bottom of book case shall have plastic laminated sheet on top only. the sides shall have plastic laminated sheet on both sides. the fornt edges of sides comma shelves comma vertical partition and top shall be covered with 3mmmm thick teak wood edging. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., the overall size of the chair shall not be less than 460mm wide 600mm deep and 355 mm high to seat from ground level and over all height 760mm. the frame of the chair verendah shall be made up of 20mm dia conduit piupe of wall thickness 1 point 6mm. seat and back of the chair shall be woven with virgin plastic cane 4mm wide and 0 point 6mm thick half round in true godrej pattern weighing not less than 6 gms in ten running meters. pvc hard rubber shoe shall be provided to each leg of chair verendah. the chair shall be powder coated in white colour after preparation of surface or as approved by ge. rest all as specified shown in drawing and directed by engineer in charge., overall size shall be 510mm long comma 575mm wide and 720mm high. all wood shall be seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. canning of chairs by true godrej pattern with plastic cane 2mm to 2.5mm wide comma white colour coma quality as approved by ge all as specified and as shown on drgs. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by engineer in charge., the overall size shall be 440 mm wide x 430mm deep and 460mm high from front and 890mm high from back. all teak used shall be 1st class hard teak wood. pvc hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screw. canning shall be done in true godrej pattern with virgin plastic cane of 2mm wide 0 point 6mm thick half round gola type weighing not less than 6 gms in ten running meters with border woven with 4mm thick plastic cane. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be 535mm long comma 470mm wide and 890mm high. well seasoned teak wood throughout in frame work shall be used for framework comma caning shall be done without any joint in the cane. the cane shall be of 2mm wide comma 0 point 4mm thick half round gola type of shah or equivalent brand. the sides of the chair shall be canned with 4mm thick cane. hard rubber rings of 25mm dia and 25mm high shall be screwed to the bottom of all legs. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be of 585 mm wx300 mm dx738 mm h. 25mm dia 16 gauge ms tube shall be provided for steel frame. synthetic enamel paint colour black shall be applied two coats over a coat of primer. 1st class teak wood shall be used for hand board. one piece pvc seat and back shall be provided. all diamensions comma shape and size shall be followed as per drg. all joints comma fixing shall be done in accordance with standard specifications. rest all as per drawing and directed by engineer in charge., overall size shall be 24 feet x 15 feet long. it shall be made up of heavy cotton fringes losely woven and knitted in rectangular pieces fringed at the ends having cotton backing .the nominal thickness of the durrie shall not be less than 5mm. as per sample approved by ge, overall size shall be 700mm long comma 300mm wide and 880mm high. main frame shall be 25mm dia 18 guage ms pipe. shelf frame shall be 19mm dia 18 guage ms pipe and covered by 3mm dia ms rods three in length wise and nine in width wise. all steel and iron surface shall be finished with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer after preparation of surfaces. rest all as per drawing and directed by engineer in charge., over all size of the rack shall be 2745mm length comma 760mm depth and 1905mm high. storage solutions mild steel heavy duty storage racks with 4 shelves . as per the trade pattern and directed by engineer in charge., the set consist of one long piece of three seater and two small pieces of single seater. as per trade pattern and directed by engineer in charge., overall size shall be 450mm long comma 300mm wide and 380mm high. all wood shall seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. h type leg stiffeners shall be provided for better support. top shall be 18 mm thick exterior grade mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified/ shown in drawing and directed by enginer in charge., overall size shall be 650mm long x 500mm wide and 750mm high. the sides comma back comma shelf and front openable shutters shall be of 18mm thick prelaminated mdf board.the front shutters shall be of 5 point 5 mm thick glass shutter with magnetic catcher.brass handle and door catchers shall also be provided to the tv trolley as described on drg. the pull out drawers shall be provided with two telescopic channel.the top of the trolley shall be of 18mm thick prelaminated mdf board of size 750mmx600mm.50mm dia swivel type castors 4 in numbers shall be provided at base. 4mm thick teak wood beading shall be fixed allroung the edges of the top. rest all as specified shown in drawing and directed by enginer in charge, overall size shall be 2440mm long comma 600mm wide and 300mm high. two long angle iron 40mmx40mmx6mm of mild steel 1980mm long shall be provided 520mm apart at bottom connected with 50mm x 3mm iron bracing comma four in numbers comma and equally spaced with 50mm x 50mmx6mm iron. all steel and iron work surfaces shall be painted with two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces on exposed to view when placed in position. rest all as specified shown in drawing and directed by enginer in charge, table dining 6 pers. overall size shall be 1500mm long comma 900mm wide and 750mm high. all wood shall be of first class teak wood. the top shall be of prelaminated mdf board of 18 by 19mm thick with 4mm thick teak wood beading alround the edges of the top fixed with headless nails and adhesive on long sides only., table dining 8 pers. overall size shall be 1800mm long comma 900mm wide and 750mm high. all wood shall be of first class teak wood. the top shall be of prelaminated mdf board of 18 by 19mm thick with 4mm thick teak wood beading alround the edges of the top fixed with headless nails and adhesive on long sides only.


Agency / Dept : indian army
Tender Value : 6495500
Due Date : Jul 23, 2026

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 15483510
Location : durgapur , west bengal

tender for renovation of toilets, synergy hall at l&d deptt. and toilets at ispat bhawan, scope of work (sow) as mentioned in tender and schedule of work( 69 )items as given below ,-1 point wiring with pvc copper wire 964.000 m,-2 circuit wiring with pvc copper wire 300.000 m,-3 power plug wiring with pvc copper wire 91.000 m,-4 supply and fixing of gi box 40.000 ea,-5 supply and laying of pvc conduit pipe 268.000 m,-6 supply and fixing 12 way double door db 5.000 ea,-7 supply,fixing led panel light 64.000 ea,-8 supply,fixing modular switch 6a 51.000 ea,-9 supply,fixing modular socket 6a 2 in 1 12.000 ea,-10 stripping,worn out plaster wall&ceiling 985.000 m2,-11 plaster sand/cement mortar,4:1,thk10mm 589.000 m2,-12 removal,rubbish,earth 23.500 m3,-13 prvdg,pcc wrk,m15,1:2:4 5.360 m3,-14 smooth cement plaster,cm1:6,thk15mm 63.000 m2,-15 dismantling of pcc/ rcc structures 8.500 m3,-16 dismantling of brick work 7.000 m3,-17 supply&layg,vitrified tiles 705.993 m2,-18 supply,fitg,fixg,venetian blinds 24.000 m2,-19 prvdg&fixg,false ceiling 230.520 m2,-20 prvdg,oil bound distemper,2 coat 1818.000 m2,-21 supply&applyg,bison exterior putty 704.000 m2,-22 plstrng,priming timber or steel,1coat 183.000 m2,-23 paintg enamel,timber,hi gloss,2coat,?wh 390.000 m2,-24 fixg porcelain auto cistern,white,10l 12.000 ea,-25 fixg flat back urinal,610x400x380mm 26.000 ea,-26 fixg,granite slab,10-12mm,wrking table 50.000 m2,-27 fixg door fitting,stainless steel aldrop 68.000 ea,-28 fixg,door,fully casing tower bolt 69.000 ea,-29 fixing tower bolts of approved type. 16.000 ea,-30 fixg door handle of approved type&size 138.000 ea,-31 fly ash brick wrk, 110mm, m-7.5, (1:4) 46.000 m2,-32 supply & installation of ms rack 13.000 ea,-33 sup,fit,fix hygeine pipe 27.000 ea,-34 supply gi pipe,dia20mm,medium quality 158.000 m,-35 supply gi pipe,dia15mm,medium quality 91.000 m,-36 supply, istallation of smoke detector 6.000 ea,-37 supply,commode 27.000 ea,-38 supply,low cistern 27.000 ea,-39 fixg,stopcock 93.000 ea,-40 fixg,bibcock 51.000 ea,-41 fixg,shower rose 9.000 ea,-42 fixg,wall tiles,kajaria,jhonson 705.000 m2,-43 fixg,towel rail,cp 24.000 ea,-44 supply,liquid soap container 39.000 ea,-45 supply,fixg,antiskid tiles 334.000 m2,-46 fixg,hessian partition,ordinary teak 47.000 m2,-47 procviding & fixing ring hanger 15.000 ea,-48 proving&fixing design mirror 43.000 m2,-49 fixg,cp pillar cock 22.000 ea,-50 fixg,window glass 59.000 m2,-51 provide partition 9mm particle board 10.000 m2,-52 provide partition 4mm clear gla


Tender Value : 4484083.54
Due Date : May 30, 2026
T18 Ref No : 16025216
Location : haridwar , uttarakhand
Source : GEM Tenders

tender for bricks , sand , agg 20mm , agg 10mm , agg 63mm , coarse sand , cement , binding wire tata , white cement jk , wire brush , enamel paint gloss r y b g bk wh 6 ltr each , enamel paint matt r y b g bk wh 6 ltr each , turpentine oil , cotton waste , poster colour 12 shade , water tube colour 12 shade , glass marking pencil , distemper white , wall putty , emery paper 200 320 and 400 nos 25 each , stainer wall nut rose wood oak yellow red brown teak , washing thinner , touchwood 4 ltr pack , stain powder r br y bk 1 kg each , writing brush round 0 to 12 no , writing brush flat 0 to 12 no , water painting brush 0 to 12 no , oil painting brush 0 to 12 no , mixing plate tray , distemper brush , roller brush , putty blade , paint brush 1 inch , paint brush 2 inch , paint brush 4 inch , glass glue locitte , glass 2mm , glass 8mm , glass sanding disc , masking tape , acrylic putty , wall primer , canvas board 16 inch x 12 inch fine grain , universal stainer r y b g 1 btl each , diamond glazer , malmal cloth , duco primer , duco paint gloss r y b g bk wh 6 ltr each , duco paint matt r y b g bk wh 6 ltr each , duco thinner , pgi sheet 8 ft x4 ft x 24g , gi wire 2mm , gi wire 4mm , ms flat 1 pt 5 inch x 1 pt 5 inch x 5mm , ms flat 1 inch x 1 inch x 5mm , ms flat 2 inch x 1 inch x 5mm , ms square pipe 1 inch x1 inch x3mm , ms round pipe 1 inch x 3mm , ms rod 25mm , ms round bar 10mm , ms angle iron 25x25x3mm , ms angle iron 35x35x3mm , ms sheet 6 ft x 3 ft x 3mm , aluminium plate 3 ft x 4 ft , ms flat 2 inch x 5mm , gi pipe 3 by 4 inch , gi rivet no 8 500 gm , gi rivet no 10 500 gm , gi rivet no 12 500 gm , distilled water , u clip 6 mm , u clip 7 mm , u clip 9 mm , rawlplug 1 pt 5 , casing capping 25mm , extension board 15 amp modular , 3 pin top 15 amp , capacitor 42 mfd , fire fighting foam chemical 1 by 2 ltr btl , timber teak 10 ft x 2 inch x 2 inch cft 5 , timber sheesham 8 inch x 6 inch x 1 inch , plywood 8 ft x 4 ft x12mm , plywood 8 ft x 4 ft x 19mm , cnc bit flat bottom straight flutes bit 2 3 4 6 mm 5 each , cnc bit ball nose bit round tip 2 3 4 6mm 5 each , welding rod no 10 , cutting disc 14 inch , grinding disc 4 inch , grinding disc 8 inch , cutting disc 4 inch , aluminium filer rod 1 by 8 inch , brass rod 1 by 6 inch , copper rod 1 by 16 inch , brazing flux 1 kg pkt , acetylene gas , oxygen gas , co2 gas , nitrogen gas , soft coal , hack saw blade 12 inch , drill bit all size 2 to 13 mm bosch , power hacksaw blade 18 inch , black screw 3 by 4 inch 500 pc , black screw 1 inch 500 pc , black screw 2 inch 500 pc , sanding disc 4 inch , tile cutter blade 4 inch , tile cutter blade 121 by 141 bosch gdc , marbal grinding disc size 0 1 2 3 60 80 120 2 each size , marble polishing disc , silicon sealant with gun 250ml , pu expanding foam sealant with gun 250ml , spray paint gun , chain saw blade 18 inch , chain saw blade 16 inch , hand gloves , welding holder , hacksaw frame , duracell bty 1 pt 5v ultra, as per technical specifications


Agency / Dept : indian army
Tender Value : 0
Due Date : Jul 09, 2026
T18 Ref No : 16083118
Source : GEM Tenders

tender for almirah large steel with shelves , king size teak wood bed with headboard and footboard , bed hard plywood top rubber wood , charpoy ip with hard top , chair verandah , chair visitor cushioned with arm , chair easy , chair dining , chair writing , chair dining long back teak wood , chair computer , sofa set 5 seater , table office wooden , table office officer , table dressing gents , table dressing ladies including stool , hat stand with mirror, replacement of ber furniture for the qe dec 2025 under ge haddo sri vijaya puram, almirah large steel with shelves. as per trade pattern and directed by engineer in charge, overall size of the bed shall be 2133mm length comma 1930mm width and 400mm high. length of head board shall be 1016mm and foorboard shall be 608mm. legs size shall be 90x90mm comma length as per head board and foot board. with engraving design and shape per approved by ge. long rails shall be 400x50mm with engraving the design pattern approved by ge. stiffener 30x40mm x 4 nos shall be used to support the top of the box parallel to head board and 2 nos perpendicular to head board. similarly stiffeners shall be used to support the bottom of the box. bed shall be made of first class teak wood or padak comma box type storage system with locking arrangement should be provided. 12mm plywood bwr grade shall be provided at the bottom and top of the storage box comma suitable opening hydraulic lifting provision shall be given at the top. head board and foot board shall be 75mm thick with engraving the design oblique provided with 75mm thick 40 density cushion covered with tapestry cloth not less than rs 750 by mtr with pattern approved by ge. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all design and shape as directed by enginer in charge, overall size of the bed shall be 2133mm length comma 950mm width and 440mm high. head board size shall be 1016mm and foorboard shall be 608mm. legs size shall be 90x90mm. long rail shall be 440x36mm. stiffener 30x40mm x 4 nos shall be used to support the top of the box parallel to head board and 2 nos perpendicular to head board. similarly stiffeners shall be used to support the bottom of the box. box type storage system with locking arrangement should be provided. 12mm plywood bwr grade shall be provided at the bottom and top of the storage box comma suitable opening hydraulic lifting provision shall be given at the top. head board and foot board shall be 36mm thick. all rubber wood surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all design and shape as directed by enginer in charge., long and short rails of bed shall be 65 x 25 mm 16 gauge rectangle ms pipe. stifners shall be 25 mm 16 gauge square ms pipe. legs shall be 32 mm 16 gauge square ms pipe and welded properly at joints to make the charpoy. 25 x 60 x 6 mm cleats be welded with short rails inner side to support the plywood. 12 mm thick ply wood bwr type unpolished shall be provided to the top of charpoy screwed with cleat and stiffners by nut and washers. all steel members shall be finshed with two coats of synthetic enamel paint to obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper in black colour. rest all as specified oblique shown in drawing and directed by enginer in charge., the overall size of the chair shall not be less than 460mm wide 600mm deep and 355 mm high to seat from ground level and over all height 760mm. the frame of the chair verendah shall be made up of 20mm dia conduit piupe of wall thickness 1 point 6mm. seat and back of the chair shall be woven with virgin plastic cane 4mm wide and 0 point 6mm thick half round in true godrej pattern weighing not less than 6 gms in ten running meters. pvc hard rubber shoe shall be provided to each leg of chair verendah. the chair shall be powder coated in white colour after preparation of surface or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., as per trade pattern and directed by engineer in charge, all wood shall be seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. canning of chairs by true godrej pattern with plastic cane 2mm to 2 point 5mm wide comma white colour comma quality as approved by ge all as specified and as shown on drgs. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., the overall size shall be 440 mm wide x 430mm deep and 460mm high from front and 890mm high from back. all teak used shall be 1st class hard teak wood. pvc hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screw. canning shall be done in true godrej pattern with virgin plastic cane of 2mm wide 0 point 6mm thick half round gola type weighing not less than 6 gms in ten running meters with border woven with 4mm thick plastic cane. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., overall size shall be 535mm long comma 470mm wide and 890mm high. well seasoned teak wood throughout in frame work shall be used for framework comma caning shall be done without any joint in the cane. the cane shall be of 2mm wide comma 0 point 4mm thick half round gola type of shah oblique equivalent brand. the sides of the chair shall be canned with 4mm thick cane. hard rubber rings of 25mm dia and 25mm high shall be screwed to the bottom of all legs. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200 mm high. all timber work shall be first class seasoned teak wood free from knots or zefects. front legs shall be of size 25mmx50mm in section and 450mm high and rear legs shall be of section 65mm x50mm made to shape. the front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. the top of side rails shall be at 450 mm from bottom of legs. two side stiffeners of 25 mm x 40 mm in section shall beprovided joining front and rear legs. the bottom side stiffeners shall be 100 mm above the bottom of legs. a middle stiffener of 25 mm x 40 mm in section joining the side stiffeners in middle shall be provided as shown on drg. for seat cushion comma a frame shall be made with 75 mm x 20 mm in section front and rear wooden horizontal rails comma joined by 40 mm 20 mm in section wooden side rails. 70 mm x 10 mm batten shall be provided in the middle. 45 mm x 10 mm batten shall be provided with three equal gaps. 50 mm thick comma 40 density foam shall be provided to the chair which shall be covered with leatherised rexine tapestry cloth not less than rs 750 by mtr of best quality as approved by ge. rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical and 12mm dia teak wood in horizontal. back shall have vertical battens 20mmx25mm in section.50mm thick synthetic foam of 40 density covered with leatheised rexene tapestry cloth not less than rs 750 by mtr made to shape shall be fixed over 12mm thick plywood . all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., as per trade pattern and directed by engineer in charge., the set consist of one long piece of three seater and two small pieces of single seater. as per trade pattern and directed by engineer in charge., all wood shall seasoned first class teak wood free from knots and defects. back shall be made by 12mm thick bwr grade plywood. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge. rest all as specified shown in drawing and directed by enginer in charge., the body of table and stool shall be 18m thick exterior grade pre laminated mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. drawers shall be supported with telescopic ball bearing channel for smooth functioning. shutter shallbe fixed with ss piano hinges and magnetic catcher. mirror frame shall be first class teak wood free from knots and defects. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., frame shall be 18 mm thick exterior grade mdf board one side laminated comma shade as approved by ge comma duly fixed with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. bevelled edge mirror shall be fixed by ss mirror fixing screw with good quality pvc plug. brass hooks as per drawing specification shall be fixed by brass oval trim self tapping screw. rest all as specified shown in drawing and directed by engineer in charge.


Agency / Dept : indian army
Tender Value : 4744430
Due Date : Jul 11, 2026

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Published By

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Wall Timber. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Wall Timber sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Wall Timber Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Wall Timber, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Wall Timber Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Wall Timber Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Wall Timber.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Wall Timber depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Wall Timber Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Wall Timber bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Wall Timber. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Wall Timber, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Wall Timber, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Wall Timber?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Wall Timber tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Wall Timber?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Wall Timber, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Wall Timber is declared L1 and is generally awarded the contract