sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

30Latest Treating iron Tenders List

Latest Treating iron Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Treating iron tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Treating iron tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Treating iron Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Treating iron tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Treating iron Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Treating iron Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Treating iron Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Treating iron tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Treating iron Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Treating iron sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Treating iron tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Treating iron tenders.

Is EMD mandatory for all Treating iron tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Treating iron work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Treating iron tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Treating iron Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16872213
Location : tawang , arunachal pradesh
Source : GEM Tenders
LIVE TENDER
tender for masonry carpentry and general construction tools - crow bar heavy duty big size , mason trowel 4 inch steel with handle , mason trowel 5 inch steel with handle , mason trowel 6 inch steel with handle , mason trowel 8 inch steel with handle , mason trowel 9 inch steel with handle , plumb bob , transparent water level pipe 10 mm , mortar pan tasla 16 inch , stone breaking hammer 2 kg , mason thread cotton , mason thread nylon , spirit level 12 inch steel body , tape steel 2 metre steel case , tape steel 3 metre steel case , tape steel 15 metre steel case , hammer stone breaking 1 kg , wheel barrow single wheel , spare wheel for wheel barrow cast iron with solid rubber tyre and double ball bearing , dah iron 12 inch with handle , rammer earth 5 kg , earth rammer 14 lbs with wooden handle , folding entrenching shovel military specification , hammer stone dressing 1 kg , felling axe 2 kg without handle , hammer chisel face with handle 6 kg , mason hammer with chisel 850 gram , mason hammer chisel type , cordless rotary hammer drill 18 volt sds plus , electric planer for carpenter nput power 650 watt to 750 watt. operating voltage 220 volt to 240 volt ac 50 hz. no load speed 15000 rpm to 17000 rpm , hand tool kit for carpenter , carpenter screw driver 18 inch , carborundum stone 6 inch x 2 inch x 1 inch , blade for jack plane 2 inch , carpenter hand drill machine , electric jack planer , electric circular saw 12 inch , electric jack plane , gurmala steel 9 inch to 12 inch , hacksaw frame 12 inch , raker 10 to 12 prong , electric circular saw with spare blade , raker 12 prong with wooden handle , hand operated bitumen sprayer can , sledge hammer 2 kg without handle , sledge hammer 5 kg to 6 kg without handle , stone breaking hammer 6 kg , stone dressing chisel half inch and three fourth inch , steel measuring tape 5 metre fibre case , steel measuring tape 15 metre fibre case , steel measuring tape 30 metre fibre case , hand saw 12 inch , hand saw 20 inch , carpenter chisel 1 inch , carpenter chisel 2 inch , auger eyed half inch , spirit level 8 inch pvc body , spirit level 12 inch pvc body , spirit level 18 inch pvc body , spirit level 24 inch pvc body , spirit level 18 inch steel body , spirit level 24 inch steel body, octagonal crow bar conforming to is 704 latest. material high carbon steel. length 1650 mm. diameter at hammer end 30 mm. nominal weight 11 kg. heat treated and forged. one chisel end and one hammer end. black oxide finish. make equivalent to tata or reputed manufacturer., conforming to is 6013. blade size 4 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 5 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 6 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 8 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 9 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., material forged steel or brass. weight 200/500 gram. precision machined pointed tip. complete with 2 metre nylon thread. corrosion resistant finish. suitable for masonry alignment., transparent flexible pvc water tube. internal diameter 10 mm. wall thickness 2 mm minimum. uv resistant. kink resistant. smooth inner surface. roll length 30 metre minimum., virgin hdpe or pp plastic. diameter 16 inch. capacity 18 to 20 litre. weight 700 gram minimum. heavy duty. unbreakable. crack resistant. smooth non stick inner surface. uv stabilized., head weight 2 kg. forged high carbon steel head. heat treated. face hardness 50 to 55 hrc. handle fiberglass or seasoned hardwood. handle length 800 to 900 mm. anti slip rubber grip. heavy duty construction. manufacturer iso 9001 certified., construction 56 tex x 3 x 3. material 100 percent cotton. linear density 560 gram per 1000 metre minimum. breaking load 78 newton minimum. ball weight 200 gram minimum. uniform twist. high strength. suitable for masonry line marking., material 100 percent nylon multifilament. diameter 1.5 mm minimum. breaking strength 100 newton minimum. ball weight 200 gram minimum. high tensile strength. abrasion resistant. water resistant. suitable for masonry alignment and layout work., non magnetic type. body material heavy duty steel. length 12 inch. accuracy 0.5 mm per metre or better. tube thickness 1.25 mm minimum. liquid ethyl ether or industrial methylated spirit. width 50 mm. height 20 mm. weight 165 gram minimum. warranty 1 year, measuring length 2 metre. blade material stainless steel. case material steel. blade width 16 mm minimum. blade thickness 0.10 mm minimum. lock button. graduation in mm and cm. accuracy class ii., measuring length 3 metre. blade material stainless steel. case material steel. blade width 16 mm minimum. blade thickness 0.10 mm minimum. lock button. graduation in mm and cm. accuracy class ii., measuring length 15 metre. blade material stainless steel. steel closed case. blade width 12 mm minimum. blade thickness 0.10 mm minimum. folding rewind handle. graduation in mm and cm. accuracy class ii., head weight 1 kg. forged high carbon steel head. heat treated. hardness 50 to 55 hrc. double face. fiberglass or hardwood handle. handle length 300 mm to 350 mm. anti slip grip. heavy duty construction., capacity 90 litre minimum. tray material pressed mild steel. tray thickness 1.2 mm minimum. frame heavy duty mild steel tubular construction. wheel diameter 380 mm minimum. pneumatic rubber tyre with steel rim. load capacity 150 kg minimum. powder coated finish., wheel diameter 380 mm minimum. cast iron rim. solid rubber tyre. double ball bearing. axle bore 20 mm. heavy duty construction. suitable for standard wheel barrow., blade length 12 inch. blade material drop forged high carbon steel. blade thickness 4 mm minimum. heat treated. cutting edge hardened. full tang construction. hardwood handle with steel rivets. overall length 450 mm minimum. heavy duty construction, head weight 5 kg. rammer head made of cast iron or forged steel. base size 200 mm x 200 mm minimum. head height 100 mm minimum. hardwood seasoned wooden handle. handle length 1200 mm minimum. heavy duty construction suitable for earth compaction., rammer weight 14 lbs. head made of cast iron or forged steel. base size 200 mm x 200 mm minimum. heat treated. seasoned hardwood handle. handle length 1200 mm minimum. heavy duty construction for compacting soil and aggregates., military specification folding entrenching shovel. three position locking mechanism. blade material high carbon steel. blade hardness 45 to 55 hrc. overall length 580 mm minimum when open. folded length 250 mm maximum. powder coated finish. serrated edge on one side. carry pouch included., head weight 1 kg. forged high carbon steel. heat treated. double face. face hardness 50 to 55 hrc. fiberglass or hardwood handle. handle length 300 mm to 350 mm. heavy duty construction., head weight 2 kg. drop forged high carbon steel. heat treated cutting edge. blade hardness 50 to 55 hrc. cutting edge width 120 mm minimum. eye suitable for standard wooden handle. rust resistant finish., head weight 6 kg. forged high carbon steel. one flat striking face and one chisel face. heat treated. face hardness 50 to 55 hrc. fiberglass or seasoned hardwood handle. handle length 900 mm minimum. anti slip grip. heavy duty construction., head weight 850 gram. high carbon steel head. one square striking face and one chisel end. heat treated. face hardness 50 to 55 hrc. hardwood or fiberglass handle. handle length 300 mm minimum. heavy duty construction., head weight 600 gram to 800 gram. forged high carbon steel. one flat face and one chisel edge. heat treated. hardwood or fiberglass handle. handle length 300 mm minimum. suitable for brick and stone masonry work., voltage 18 volt dc. chuck type sds plus. battery lithium ion 4 ah minimum. motor type brushless or brushed. impact energy 1.5 joule to 2.6 joule. no load speed 0 to 1400 rpm. impact rate 0 to 4675 bpm. three operating modes rotary drilling hammer drilling and chiselling. maximum drilling capacity concrete 28 mm metal 13 mm wood 30 mm. tool weight 2.3 kg to 3.5 kg including battery. integrated mechanical or electronic safety clutch with anti rotation protection. vibration reduction system. variable speed control. forward and reverse function. led work light. fast charger. minimum two lithium ion batteries of 4 ah each. heavy duty carry case included. manufacturer iso 9001 certified. warranty 1 year minimum. make bosch or makita or dewalt or hilti or equivalent., input power 650 watt to 750 watt. operating voltage 220 volt to 240 volt ac 50 hz. no load speed 15000 rpm to 17000 rpm. planing width 82 mm. adjustable planing depth 0 mm to 2.6 mm. rebating depth 9 mm minimum. heavy duty aluminium base plate with v groove. reversible tungsten carbide blades. dual chip ejection. adjustable depth control. parking shoe. ergonomic soft grip handle with safety lock switch. dust collection facility. accessories to include parallel guide wrench and dust bag. manufacturer iso 9001 certified. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., professional carpenter hand tool kit comprising essential hand tools. heavy duty carrying case. tools made of chrome vanadium steel or high carbon steel. ergonomic insulated handles. manufacturer iso 9001 certified. make bosch or stanley or taparia or ingco or equivalent., overall length 18 inch. blade material chrome vanadium steel. blade length 300 mm minimum. magnetic tip. hardened and tempered blade. ergonomic anti slip handle. manufacturer iso 9001 certified. make taparia or stanley or bosch or equivalent., size 6 inch x 2 inch x 1 inch. material silicon carbide. double sided coarse and fine grit. suitable for sharpening carpenter tools. heavy duty quality., blade width 2 inch. material high carbon tool steel. hardened and tempered. hardness 58 to 62 hrc. precision ground cutting edge. suitable for standard hand jack plane., manual hand drill with geared drive. chuck capacity 1.5 mm to 10 mm. steel body. hardened steel gears. wooden or polypropylene handle. smooth operation. heavy duty construction., input power 650 watt to 750 watt. voltage 220 volt to 240 volt ac. no load speed 15000 rpm to 17000 rpm. planing width 82 mm. adjustable planing depth 0 mm to 2.6 mm. rebating depth 9 mm minimum. tungsten carbide blades. aluminium base plate. dust collection facility. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., blade diameter 12 inch. input power 1800 watt minimum. voltage 220 volt to 240 volt ac. no load speed 4000 rpm minimum. maximum cutting depth 100 mm minimum. adjustable bevel 0 degree to 45 degree. blade guard. dust extraction port. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., input power 650 watt to 750 watt. voltage 220 volt to 240 volt ac. no load speed 15000 rpm to 17000 rpm. planing width 82 mm. adjustable planing depth 0 mm to 2.6 mm. aluminium base plate. tungsten carbide blades. dust collection facility. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., material high carbon steel. size 9 inch to 12 inch. hardened and tempered. polished finish. heavy duty construction. suitable for carpenter marking and shaping work. indigenous pattern., frame size 12 inch. heavy duty tubular steel frame. suitable for 300 mm blade. adjustable blade tension. ergonomic handle. powder coated finish. blade included. make taparia or stanley or eclipse or equivalent., heavy duty garden raker. number of prongs 10 to 12. prong material high carbon steel. head width 300 mm to 350 mm. prongs heat treated. handle length 1200 mm to 1500 mm. hardwood handle with firm grip. powder coated finish., blade diameter 12 inch. input power 1800 watt minimum. operating voltage 220 volt to 240 volt ac 50 hz. no load speed 4000 rpm minimum. cutting depth 100 mm minimum at 90 degree. bevel capacity 0 degree to 45 degree. carbide tipped blade. blade guard. dust extraction port. soft grip handle. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., blade diameter 12 inch. input power 1800 watt minimum. operating voltage 220 volt to 240 volt ac. no load speed 4000 rpm minimum. maximum cutting depth 100 mm minimum. adjustable bevel 0 degree to 45 degree. one extra tungsten carbide tipped blade included. heavy duty carry case. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., number of prongs 12. head material mild steel. head length 12 inch. heat treated prongs. hardwood handle length 1200 mm minimum. powder coated finish. heavy duty construction., capacity 10 litre minimum. material heavy gauge mild steel. hand operated pump. brass spray nozzle. flexible hose 1.5 metre minimum. working pressure 3 bar minimum. leak proof construction. powder coated finish. suitable for spraying bitumen emulsion and primer., conforming to is 841 latest. head weight 2 kg. oval round nose eye. forged high carbon steel. heat treated. face hardness 50 to 55 hrc. without handle. black finish., conforming to is 841 latest. head weight 5 kg to 6 kg. oval round nose eye. forged high carbon steel. heat treated. face hardness 50 to 55 hrc. without handle. black finish., head weight 6 kg. forged high carbon steel. heat treated. double face. fiberglass or seasoned hardwood handle. handle length 900 mm minimum. anti slip grip. heavy duty construction, size half inch and three fourth inch. material forged high carbon steel. heat treated. hardness 50 to 55 hrc. overall length 200 mm to 250 mm. hardened cutting edge. suitable for stone dressing and masonry work., measuring length 5 metre. blade material stainless steel. fibre reinforced abs case. blade width 19 mm minimum. blade thickness 0.10 mm minimum. lock button. graduation in mm and cm. accuracy class ii. warranty 1 year minimum. make freemans or stanley or bosch or equivalent., measuring length 15 metre. blade material stainless steel. fibre reinforced abs case. blade width 12 mm minimum. blade thickness 0.10 mm minimum. folding rewind handle. graduation in mm and cm. accuracy class ii. warranty 1 year minimum. make freemans or stanley or bosch or equivalent., measuring length 30 metre. blade material stainless steel. fibre reinforced abs case. blade width 13 mm minimum. blade thickness 0.10 mm minimum. folding rewind handle. graduation in mm and cm. accuracy class ii. warranty 1 year minimum. make freemans or stanley or bosch or equivalent., blade length 12 inch. blade material high carbon steel. blade thickness 1 mm minimum. triple ground hardened teeth. teeth per inch 7 to 9. ergonomic anti slip handle. suitable for wood cutting. make stanley or bahco or taparia or equivalent., blade length 20 inch to 21 inch. blade material high carbon steel. blade thickness 1 mm minimum. triple ground hardened teeth. teeth per inch 7 to 9. ergonomic anti slip handle. suitable for heavy duty wood cutting. make stanley or bahco or taparia or equivalent., blade width 1 inch. blade material chrome vanadium steel or high carbon steel. hardened and tempered. hardness 58 to 62 hrc. bevel edge. wooden or polypropylene handle with steel striking cap. make stanley or taparia or bosch or equivalent., blade width 2 inch. blade material chrome vanadium steel or high carbon steel. hardened and tempered. hardness 58 to 62 hrc. bevel edge. wooden or polypropylene handle with steel striking cap. make stanley or taparia or bosch or equivalent., size half inch. material forged high carbon steel. heat treated. precision ground spiral. eye type. suitable for wood boring. rust resistant finish. make taparia or stanley or equivalent., length 8 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 12 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 18 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 24 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 18 inch. body material heavy duty steel. three precision acrylic vials. accuracy 0.5 mm per metre or better. powder coated finish. shock resistant end caps. make freemans or stanley or bosch or equivalent., length 24 inch. body material heavy duty steel. three precision acrylic vials. accuracy 0.5 mm per metre or better. powder coated finish. shock resistant end caps. make freemans or stanley or bosch or equivalent.
Agency / Dept :
border road organisation BRO
Due Date :
Sep 09, 2026 (9 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16813008
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
LIVE TENDER
tender for almirah large with shelves steel , book case small , charpoy ip with hard top , locker bed side steel , rack adjustable 6 tier steel , table dressing gents with mirror , table dressing ladies with mirror , table dining 4 person , table writing med , teapoy wooden , hat stand with mirror , sofa set 5 seater , chair computer , rack shoe steel , table bed side , bin solied linen multi purpose, special repair surveyed off condemned furniture for the qe jun 2025 under ge minniebay, dimension overall size shall be 1985mm high comma 920mm wide and 485mm deep. description the base shall be made of two numbers mild steel sheet channel bases made in u shaped with ends covered. mild steel sheet shall be 1mm thick. the base channel shall be welded at 50mm from each end of the length of 920mm and shall be up to full width of 485mm and shall be 100mm high top comma sides bottom and back of almirah shall be of 1mm thick mild steel sheet. four shelves equally spaced of 1mm thick mild steel sheet shall be provided to make five compartments. front shutter shall two leaves of equal size. front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung. all joints and welding and fixing shall be done in accordance with the standard workmanship. handle one chromium plated steel handle with a locking device shall be provided as shown on drawing. locking device the locking device shall be three way locking device and shall also be provided with decorative key plate. finish all steel surfaces shall be painted with two coats of smoke grey paint internally and extrenally with spray machine over a coat of red oxide primer after preparation of surfaces. a mark of mes shall also be provided on top left corner of front shutter with visible colour. painting shall be done with spray machine. rest all as per drg., overall size shall be 1025mm long comma 450mm wide and 750mm high. back shall be 1025 mm long and 750 mm high made out of prelaminated hdf board bd 18mm thick one side teak comma walnut and other side balancing white comma rest all as per drg and as directed by engr in charge., overall size shall be 1980mm long comma 900mm wide and 440mm high. two long rails and two short rails shall be of 25mmx65mmx16 gauge ms rectangular pipe. the legs shall be of size 32mmx32mmx16 gauge welded to long and short rails as shown on drg.two stiffeners of size 25mmx25mmx16 gauge shall be provided in equidistant between two opposite long rails. six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. two stiffeners joining legs of size 25mmx25mmx16 gauge shall be provided at 150mm from ground level. 12mm thick bwr plywood shall be provided for top as shown on drg with proper nut and bolt .one nut and bolt shall also be provided at centre of each stiffeners for fixing the plywood irrespective of what is shown on drg. pvc hard rubber shoes shall be fixed at bottom of each leg. all steel surfaces shall be painted with synthetic enamel paint black in color after applying a coat of primer. rest all as per drg, dimension overall size shall be 760mm long comma 600mm wide and 1100mm high. description the locker shall be made of mild steel sheet 1mm thick. 20 mm dia conduit pipe shall be chrome plated with wall thickness of 1 point 6 mm shall be fixed with side sockets. two handles chromium plated 100mm long shall be fixed to shutters with necessary riveting. one hasp and staple 75mm long shall also be fixed to shutters with riveting. the left shutters shall be provided with 100mm long tower bolt inside at upper and lower ends also. the locker shall be provided with compartments as shown in drgs made of 1mm ms sheet. finish all steel surface internally and externally comma exposed to view when placed in position shall be given two coats of smoke grey paint internally and externally after properly smoothened the surface with sand paper and applying putty. painting shall be done with spray machine. rest all specifications are as per drg., dimension overall size shall be 915mm long comma 610mm wide and 1905mm high. description the entire rack shall be made of 1mm mild steel sheet. the sides shall be provided with 40x40x4mm angle iron welded to 1 point 00mm thick ms sheet. 75x75x3mm thick flat iron cut to shape shall be welded at front corner. all partitions shall also be made of 1mm thick mild steel sheet and shall be riveted to side of rack. all dimensions comma shape and size shall be followed as per drg. all joints comma fixing shallbe done in accordance with standard specifications. rest all as shown on drg. finish all steel surfaces exposed to view when placed in position shall be painted with two coats of smoke grey hammer paint internally and extrenally with spray machine after preparation of surfaces. painting shall be done with spray machine. rest all as per drg., all as per drg comma the frame shall be strictly as per drg wallet oblique teak colour as approved. the mirror shall be of 5mm thickness of make modiguard oblique saint gobain all shown on drg and as directed by engr in charge., the overall size of the table dressing shall be 1150mm long 380mm wide and 1700mm high. the sides comma top comma back and front of the base unit shall be of 18mm thick prelaminated mdf board. the bottom of the side units shall be of 12mm thick mdf board. the sides and back of drawers shall be of 12mm thick prelaminated mdf comma bottom of the drawers shall be of 6mm thick commercial ply whereas the front of the drawers shall be of 18mm thick prelaminated mdf board. 5mm thick electro copper plated mirror shall be fixed over 6mm thick plywood back. track rails 25mm x 25mm in section on one side telescopic channel of make hettick oblique ebbco comma on two vertical. the overall size of the stool shall be 440mm long 350mm wide and 425mm high. the four sides shall be of 18mm thick prelaminated mdf. the top of the stool shall be of 12mm thick plywood openable as shown in drg. four heavy duty revolving nylon double wheels shall be provided at base below the 6mm base ply fixed over wooden runner 20 mm x 20 mm. the seat of the stool shall be 75mm high comma made of foam 40 density covered with tapestry cloth as approved by engr in charge oblique ge. rest all as per drg., all as per drg comma the wood shall be 1st class hard wood teak free from any joints cracks and knots. the top shall be made out of 18mm thick mdf board exterior grade one side teak lamination in wange oblique wallet as approved colour and one side white lamination. all exposed edges of ppb shall be provided wooden beading of teak wood 4mm thick x 18mm wide duly polished with matching colour the frame shall be polished after prepration of surfaces with two or more coats of brown oblique walnut colour melamyne polish with spray machine as per the requirement to its glossy look. rest all as shown on drg and as directed by engr in charge., dimension overall size shall be 1145mm long comma 600mm wide and 760mm high. description all wood shall be of first class hard teak wood except top and right hand side drawer cabinet. legs shall be of 35mmx55mm in section and 717mm high having 5mmx5mm in section groove at the top of legs at the portion when placed in position. the top shall be of 18mm thick of approved shade and the edges shall be covered with 4mm thick teak wood beading. two short stiffeners of teak wood of size 50mmx40mm in section irrespective of what is shown on drg shall be provided between legs at 100mm from bottom of legs. sides of the box which house the drawer and cabinet shall be 18mm thick bwr grade plywood sides and back of drawers shall be of 12mm thick teak wood planks. bottom of drawers shall be of 6 mm thick plywood commercial. 6mm thick plywood commercial 75mm high partition shall be provided in the drawer. shutter for cabinet shall be fixed with piano type continuous hinges. lock shall be provided to drawer and shutters. recessed handle shall be provided to drawer and shutter. 25mm dia and 25mm high rubber shoes shall be fixed to bottom of legs. finish all wood surfaces shall be melamyne polished with high gloss finishby spray machine. rest all as per drg., dimension the overall size shall be 600mm long comma 450mm wide and 540mm high. description the legs shall be 60mmx30mm in section and 497 mm high and shall be of teak wood. 5mmx5mm in section groove shall be provided at the visible portion of top of legs. top rails of teak wood of 20mmx50mm in section and 510mm long shall be provided between the legs. bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. a centre rail of size 20mmx50mm shall also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg. 25mm thick and 25mm dia hard rubber oblique pvc rings shall be fixed to the bottom of all legs fixed with 30mm long screws. top of table shall be of 18 mm thick pre laminated mdf board with 4mm teak wood edging alround the top of table. finish all wood surfaces shall be melamyne polished with high gloss finish by spray machine. rest all as per drg, overall size shall be 1330 mm long comm 710mm high. the inner frame shall be of 50mmx20mm teak wood battens six in nos. the back and front of frame shall be covered with 6mm thick commercial ply. the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive. six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg. 5mm thick looking mirror of saint gobian comma modiguard oblique atul shall be provided as shown on drg with beading alround. mild steel key plate shall be provided at both top corners of the hat stand. all exposed surfaces shall be given high gloss melamyne polish with lacquer spray machine finish. rest all as per drgs, all as per drg comma the timber in all around shall be first class hard wood teak comma the cushions shall be made out of pu foam of min 40 density of approved make and covered with tapestery cloth of approved quality comma pattern and colour before incorporating in work. the frame shall be polished after prepration of surfaces with two or more coats of brown oblique walnut colour melamyne polish with spray machine as per the requirement to its glossy look rest all as shown on drg and as directed by engr in charge., the base pedestal assembly of chair computer shall be of dia 700mm and 1060mm high. the pedestal assembly shall be provided with injection molded in black 30 percentage glass filled nylon. a 10 point 5mm dia forged bright zinc plated ms castor pin is of press fitted into each prong for holding the castors. the seat and back of the chair computer shall be made of 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. the back form shall be designed with contour lumber support for extra comfort with pvc lipping allround. the back rest shall be adjustable and consist of drop lift mechanism and shall be adjusted in the insert. it shall be scratch and weather resistant. rest all as per sample and as approved by ge, overall size shall be 700mm long comma 300mm wide and 880mm high. the legs of the shoe rack shall be of 25mm dia ms pipe of 18 gauge. the five shelves of the rack shall be of 20mm dia ms pipe of 18 gauge welded to legs. the shelves shall have 3mm dia ms rod 9 nos in widthwise and 3 nos in lengthwise welded to 20mm dia shelf frame. pre treated with powder coated oven baked with black colour., the overall size of the table bed side shall be 450mm x 450mm x 600mm from rear and 450mm x 450mm x 500mm from front as shown in drg. the entire frame of table bed side shall be made up of 18mm ms square pipe 18 gauge duly black powder coated. the two sides and top shall be made up of 18mm thick mdf board exterior grade. the back of the table except the top portion as shown in drg shall be provided with 6mm commercial plywood bwr grade duly screwed to frame. the two sides comma back and bottom of drawers of the table shall be made up of 12mm thick mdf board irrespective of what is shown on drg comma except the front side which shall be of 18mm thick mdf board exterior grade. the drawers shall be made functional by using telescopic channel of appropriate size shall be used for smaooth mvement of drawer.the drawers of the tables shall be provided with 100mm long cp handles. rest all as per drg. the lower portion of the bed side table should be box type provided with one shutter of appropriate size duly fixed with piano type hinges comma one cp handle of 4 inch size and one magnetic catcher should also be provided. rest all as shown on drawing and as directed by engr in charge., overall size shall be of 1000mm long comma 380mm wide and 760mm high. bottom rest shall be made of 19mm thick mdf board and shall be 900mm long and 280mm wide and 75mm hih joined together in long and short sides. multipurpose bin linen shall be placed over it. the bin shall be 1000mm long comma 380mm wide and 385mm high. back side shall be of 19mm thick mdf board 1000mm long and 685mm high. sides shall be of 19mm thick mdf board 380mm wide and 685mm high. top and bottom shall be of 19mm thick mdf board 1000mm long and 380mm wide. a vertical partition shall be provided at 400mm from inner face of left hand side which shall be of 19mm thick mdf. a shelf shall be provided in the middle of left portion which shall be of 19mm thick mdf board and shall remain uncovered. two drawers and a cupboard shall be provided on the right hand side. of the bin. bottom comma sides comma back and front of drawers shall be of 12mm thick mdf board. the partition between the drawers shall be of 19mm thick mdf board. front shutter of cupboard shall be hinged with continuous piano type hing and shall be side hung. the shutter shall have eight vertical slots of 19mm width and 180mm high with gap of 19mm made in the center of the shutter. the shutter shall be provided with 100mm long mild steel powder coated handle and ball spring catch as shown on drawing. 19mm thick mdf board 543 mm long and 40mm wide shall be provided as base support in the front under the drawers. teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers. teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers on the outer sides in such a way that it rns smoothly over the beares fixed on the the sides of the partitions of the bin.
Agency / Dept :
indian army
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
23.73L
View Documents
T18 Ref No : 16854181
Location : haldwani , uttarakhand
Source : GEM Tenders
LIVE TENDER
tender for fitter trade hand tools and equipment - steel rule with metric british graduation , caliper outside spring type , hammer ball peen with handle , file flat second cut , file half round second cut , hacksaw frame fixed type , safety goggles , straight edge steel , vernier caliper , punch letter set , drill twist straight shank , drill twist taper shank , file feather edge smooth , file triangular smooth , file round second cut , file square second cut , file triangular second cut , file flat second cut safe edge , file flat bastard , file half round bastard , file round bastard , file hand second cut , wire brush , wooden handle forged soldering iron copper bit , hand reamer set taper pin straight flute , machine reamer parallel helical flute , scraper flat , scraper triangular , scraper half round , chisel cold crosscut diamond point , chisel cold flat , chisel cold round nose , drill chuck with key , wheel dresser , lockers with 8 drawers , metal rack , instructor table , instructor chair , black board with easel , torque wrench , power tools for fastening , different profile gauges , knurling tool diamond straight diagonal , indexable boring bar with inserts , temperature gauge , dowel pin straight , standard tap screws , lapping plate , medium carbon heat treated alloy steel metric studs and bolts along with nuts , caps screws , drill gauges , cast iron globe valve , stop cock , slip on forged steel flange , pipe threading die with handle , jigs fixture , pulleys for v belt or flat belt , steel keys , damaged old spur gear , v belt and flat belt , packing gasket , washer clutch keys jib cotter circlip , hollow punch , drill drift , bearing different types , lifting sling , bearing extractor , pulley extractor , mallet , aviation snips straight cut , flat headed hammers with handle , snip bent left cut , slip gauge as johnson metric set , dial vernier caliper , screw thread micrometer , digital micrometer outside , engineers try square , carbide wear block , arm strong type tool bit holder , pipe bender machine , pneumatic trainer kit , carrier for mounting components such as pb relay boxes , cut section model for pneumatic components , hydraulic trainer kit , hydraulic workstation , cut section models for hydraulic components, as per specification
Agency / Dept :
department of personnel and training
Due Date :
Sep 01, 2026 (1 day left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16953018
Location : vemula , andhra pradesh
Source : GEM Tenders
LIVE TENDER
corrigendum tender for bitumenlayingwork2 , kerbstonelayingwork1 , tailingexcavationwork1 , borrowearthsoilwork3 , removinghdpeliningwork1 , dismantlingstonepitching1 , backfillingoftailing1 , laboratorytestwork15 , humepipework1 , humepipework2 , humepipework3 , humepipework4 , humepipework5 , humepipework6 , earthworkfillingforbund1 , stonepitchingwork5 , brickwork1 , brickwork2 , plasteringwork1 , plasteringwork2 , plasteringwork3 , paitingwork1 , paitingwork2 , paitingwork3 , handrailingwork3 , ccforflooringwork1 , plasteringwork4 , glasssstripswork1 , cementpunning1 , aluminumwork1 , shutterworks1 , glasspaneswork1 , siliconsealantwork1 , doorworks1 , mechanicalinstallationpumps1 , mechanicalinstallationpipes1 , mechanicalinstallationpipes2 , mechanicalinstallationpipes3 , electricallinstallation5 , mechanicalerections1 , disposalareappep1 , slimedisposalareappep1 , slimedisposalareappep2 , constructionofelectricalfacilityworklumpsum1 , panelneartaillingpond , automaticpowerfactorcorrectionpanel1 , batterychargerdcboard , lcsmushroomheadstay1 , lcsmushroomheadstay2 , lcsmushroomheadstay3 , distributiontransformer1 , dieselgeneratorset1 , dieselgeneratorfounation1 , ltbusduct1 , htswitchgearincomingpanel1 , htswitchgearincomingpanel2 , mainlightingdistributionboard1 , sublightingdistributionboard , highmastlighting1 , highmastlighting2 , lighteningfixture1 , ltpowercables1 , htpowercables1 , htpowercables2 , ltcontrolcables , junctionboxes1 , earthinglightningitems1 , aircondition1 ,, construction of 4th stage tailing pond, stripping and clearing the site of jungles, bushes, shrubs, wood etc., uprooting of rank vegetation, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level, removal of undesirable materials etc. including removal and disposal of debris at suitable locations with all leads and lifts, as decided by the engineer-in-charge., felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unserviceable material at suitable ocations as decided by the engineer-in-charge. beyond 30 cm girth upto and including 60 cm girth, felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unserviceable material at suitable ocations as decided by the engineer-in-charge. beyond 60 cm girth upto and including 120 cm girth, felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unserviceable material at suitable ocations as decided by the engineer-in-charge. beyond 120 cm girth upto and including 240 cm girth, earth work in excavation in development of embankment profile in the following types of soils for all lifts, including taking adequate protection during excavation, drilling and transporting the excavated spoil / material after stripping of top soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation in development of embankment profile in the following types of soils for all lifts, including taking adequate protection during excavation, drilling and transporting the excavated spoil / material after stripping of top soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. ordinary rock, earth work in excavation in development of embankment profile in the following types of soils for all lifts, including taking adequate protection during excavation, drilling and transporting the excavated spoil / material after stripping of top soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond.hard rock (blasting prohibited), earth work in excavation of hillocks within existing pond area in the following types of soils for all lifts, transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead and lift within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation of hillocks within existing pond area in the following types of soils for all lifts, transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead and lift within acquired area of tailing dam & pond. ordinary rock, earth work in excavation of hillocks within existing pond area in the following types of soils for all lifts, transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead and lift within acquired area of tailing dam & pond. hard rock (blasting prohibited), earth work in excavation in bed layer -1 in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, transporting the excavated soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of the engineer-in-charge for any lead within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation in bed layer -1 in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, transporting the excavated soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of the engineer-in-charge for any lead within acquired area of tailing dam & pond. ordinary rock, earth work in excavation in pipe-support foundations, peripheral drains, culverts, diversion drain, watch towers, miscellaneous equipment foundations etc. in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, drilling and transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation in pipe-support foundations, peripheral drains, culverts, diversion drain, watch towers, miscellaneous equipment foundations etc. in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, drilling and transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. ordinary rock, earth work in excavation in pipe-support foundations, peripheral drains, culverts, diversion drain, watch towers, miscellaneous equipment foundations etc. in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, drilling and transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. hard rock (blasting prohibited), supplying and transporting earth of specified quality (as per specification and drawing) from borrow-pit i.e. the source not owned by ucil but arranged by the contractor at his own cost including all taxes, royalty etc and filling the same in bed later - 1 in layers not exceeding 250 mm above existing ground level, watering of each layer in the stipulated manner as per specification and / or direction of the engineer-in-charge and compaction by mechanical means to achieve required degree of compaction as per specification, all complete as per drawing, specification and direction of the engineer-in-charge., supplying and transporting earth of specified quality (as per specification and drawing) from borrow-pit i.e. the source not owned by ucil but arranged by the contractor at his own cost including all taxes, royalty etc and filling the same in embankment in random fill zone in layers not exceeding 250 mm in proper profile to various heights above existing ground level, watering of each layer in the stipulated manner as per specification and / or direction of the engineer-in-charge and compaction by mechanical means to acheive required degree of compaction as per specification, disposal of excess of unusable material all complete as per drawing, specification and direction of the engineer-in-charge for any lead and lift (sectional measurement for compacted filling will only be paid)., supplying and transporting clay of specified quality and property (as per specification and drawing) from borrow-pit i.e. the source not owned by ucil but arranged by the contractor at his own cost including all taxes, royalty etc and laying the same over random fill on upstream side of embankment in layers not exceeding 150 mm measured loose in proper profile, watering of each layer in stipulated manner to various heights and compacting each layer by mechanical means to achieve required degree of compaction as per specification and / or direction of the engineer-in-charge, all complete as per drawing, specification and direction of the engineer-in-charge for any lead and lift (sectional measurement for compacted thickness will only be paid)., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) over clay lining on upstream side of dam with voids filler with stone dust with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge. note - payment shall be made for the actual area of coverage of stone pitching. wastage shall not be payable., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) over random fill on downstream side of dam with voids filler with stone dust with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge. note payment shall be made for the actual area of coverage of stone pitching. wastage shall not be payable., supplying, transporting, spreading and compacting sand (average 100 mm thick) over stone pitching on upstream side of dam with all lead and lift including all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge., supplying, transporting and laying 1500 micron thick high density polyethelene (hdpe) sheet (textured on both sides) as lining over sand cushion layer on upstream side of dam, laid in position by qualified and skilled installer certified by the manufacturer and approved by the engineer-in-charge, with all lead and lift including sealing of joints (hot wedge single and dual track seaming and / or extrusion fillet seaming method or any other specialized method e.g. robotic two stitch welding etc.) of new sheets and sealing of new lining sheet with existing lining sheet with an overlap of approximately 1.0m, anchoring the new lining sheet on top of new embankment, maintaining quality control, conducting tests as per requirement of the specification, all complete as per drawing, provisions of specification and direction of the engineer-in-charge. note payment shall be made for the actual area of coverage of hdpe lining sheet. overlapping area, wastage etc. shall not be payable., supplying, transporting, laying and compacting uniformly graded stone aggregate filters within new embankment at all levels,incl shuttering, tools tackles all complete as per drawing, specification and direction of the engineer-in-charge., supplying, transporting, laying and compacting uniformly graded coarse sand filters within new embankment at all levels incl shuttering, tools tackles all complete as per drawing, specification and direction of the engineer-in-charge. (sand shall conform to is383). laying and compacting rock-fill toe dam on downstream side of embankment with following materials at all levels, all complete as per drawing, specification and direction of the engineer-in-charge., with rocks arranged by the contractor at his own cost (rate to include supply and transport also), earth work in back-filling including watering, ramming and compaction at all elevation around pipe support foundations, drain trenches etc. as per specifications and drawings and as directed by the engineer-in-charge with selected soils obtained from stacks under item no. 6 above for any lead within acquired area of tailing pond and dam. (filling shall be done in layers not exceeding 250 mm in loose thickness and watered as necessary. each layer of filling to be compacted to acheive a dry density of not less than 95% of the proctor density)., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) in diversion drain and at outfall locations with interstices between adjacent stones filled-in with stones of proper size well-driven in order to ensure tight packing and complete filling of all interstices so that no chip can be removed by hand, with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge. note payment shall be made for the actual area of coverage of stone pitching. wastage shall not be payable., earthwork in filling using earth obtained from item nos. 3, 4, 5 and 6 above in construction of embankment of access roads (total four nos. access roads) connecting top of new tailing pond embankment in layers not exceeding 250 mm in proper profile to various heights above existing ground level, watering of each layer in the stipulated manner as per specification and / or direction of the engineer-in-charge and compaction by mechanical means to acheive required degree of compaction as per specification, all complete as per drawing, specification and direction of the engineer-in-charge for any lead and lift (sectional measurement for compacted filling will only be paid)., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) on sides of embankments of access roads with voids filler with stone dust with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge., supplying site machine batched plain cement concrete of 136 nominal mix (1 cement 3 coarse sand 6 graded stone aggregate with 20 mm and down aggregates) below foundations, walls, drains, pits etc. including mixing, transporting, placing in position, compacting to proper thickness and level, curirg, maintaining proper quality control including cost of admixtures in recommended proportions as per is 9103 to accelerate/retard setting of concrete, improve workability without impairing strength and durability but excluding cost of shuttering work, all complete as per specifications, drawings and direction of the engineer-in-charge and including cost of form work., extra over item 30 bove for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. note (i) cost of shuttering and reinforcement shall be paid in respective items. (note the bidder has to quote only extra cost above the item 30 in the line item of 31, for example- if the cost of item 30 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 31 of the price part), providing, mixing, laying in position in substructure upto plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m25 grade with minimum cement content of 330 kg/cum, providing, mixing, laying in position in substructure upto plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m30 grade with minimum cement content of 350 kg/cum, extra over item 32 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. concrete of m25 grade with minimum cement content of 330 kg/cum (note the bidder has to quote only extra cost above the item 32 in the line item of 34, for example- if the cost of item 32 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 34 of the price part), extra over item 33 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying.concrete of m30 grade with minimum cement content of 350 kg/cum. (note the bidder has to quote only extra cost above the item 33 in the line item of 35, for example- if the cost of item 33 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 35 of the price part), providing, mixing, laying in position in superstructure above plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m25 grade with minimum cement content of 330 kg/cum, providing, mixing, laying in position in superstructure above plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m30 grade with minimum cement content of 350 kg/cum, extra over item 36 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. concrete of m25 grade with minimum cement content of 330 kg/cum (note the bidder has to quote only extra cost above the item 36 in the line item of 38, for example- if the cost of item 36 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 38 of the price part), extra over item 37 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. concrete of m30 grade with minimum cement content of 350 kg/cum (note the bidder has to quote only extra cost above the item 37 in the line item of 39, for example- if the cost of item 37 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 39 of the price part) (another note-2 for item nos. 23, 24, 25 and 26 (i) excess cement, if required in design mix, with respect to the minimum cement content mentioned above, shall be paid under respective item. (ii) cost of shuttering and reinforcement shall be paid through respective items.(iii) rendering of treatment at construction joint shall be carried out under supervision of manufacturer, cost of which shall be included in rate of these items. (iv) design of pipe support foundations, high mast foundations, miscellaneous pump foundations, transformer and other equipment foundations shall be under scope of the contractor. (v) contractor shall prepare design drawings and bar bending schedules for all rcc structures and submit the same to ucil for approval., supplying and laying precast reinforced cement concrete elements at any level using 20 mm and down graded crushed stones as coarse aggregate as per approved design mix including supply of materials / labour / tools and tackles etc. as required, formwork, mixing, laying, compacting to proper size and thickness, curing, storing, handling, transporting, erection without damage etc. but excluding cost of shuttering and reinforcement, all complete as per drawings, specifications and direction of the engineer-in-charge. concrete of m25 grade with minimum cement content of 330 kg/cum note (i) excess cement, if required in design mix, with respect to the minimum cement content mentioned above, shall be paid under respective item. (ii) cost of shuttering and reinforcement shall be paid in respective items., add for consumption of extra / excess cement, if required, in design mix concrete (item no. 23 to 26 above) over the specified minimum cement content in respective items mentioned above. note i) requirement of extra cement with respect to the minimum cement content mentioned against respective items of approved design mix of concrete to achieve the characteristic strength for each design mix must be approved by engineer-in-charge during mix design stage based on laboratory test results which must also be approved by the engineer-in-charge..(ii) payment shall be on the basis of actual quantity of cement used in mix concrete executed., supplying, installing, dismantling and removing shuttering for foundations and substructures upto plinth level in all kinds of rcc work for all leads and lifts including necessary rendering of concrete surfaces after exposure, maintaining proper quality control, supervision etc., all complete as per drawings, specification and direction of engineer-in-charge. notes for the above item nos. i) the design of formwork/staging shall be submitted by the contractor to ucil for approval before commencement of work., supplying, installing, dismantling and removing shuttering for superstructures above plinth level in all kinds of rcc work for all leads and lifts including necessary rendering of concrete surfaces after exposure, maintaining proper quality control, supervision etc., all completer as per drawings, specification and direction of engineer-in-charge. notes for the above item nos. i) the design of formwork/staging shall be submitted by the contractor to ucil for approval before commencement of work., supplying, straightening, cutting, bending, binding with 2 nos. 20 gauge annealed soft iron wire and placing in position following types of reinforcement, of all diameters to all types of rcc members in substructure upto plinth level including all lifts and leads, maintaining proper quality control, supervision, provision of necessary chairs/spacers, tying and bending of dowel bars, cover blocks of same grade of concrete, preparation of bar bending schedule and getting the same approved from ucil before construction, all complete as per drawings, specification and direction of the engineer-in-charge. thermo-mechanically treated (tmt) bars of grade fe-500d conforming to is1786. note for above items. i) the supply of fe 500d tmt bars conforming to is 1786 (latest) shall be fromm/s sail, iisco, rinl, tata steel and jindal from their own plants rolled from virgin material only.ii) reinforcement steel bars from rerollers of the above manufacturers will not be accepted iii) no extra payment shall be made on account of rolling margin and wastage iv) contractor shall supply copies of the documentary evidence of purchase of steel, test certificates from these manufacturers (steel either directly purchased or through their dealers)and also tests from third party, if required, to be arranged at no extra cost.v) welding weights, weight of binding wires etc. shall not be measured for payment but the cost of the same shall be deemed to have been included in the quoted rate.vi) chairs and spacers provided will not be paid extra.vii) preparation of bar bending schedule for reinforcement in all types of rcc structures will be prepared by the contractor and submitted to ucil for approval., supplying, straightening, cutting, bending, binding with 2 nos. 20 gauge annealed soft iron wire and placing in position following types of reinforcement, of all diameters to all types of rcc members in superstructure above plinth level including all lifts and leads, maintaining proper quality control, supervision, provision of necessary chairs/spacers, tying and bending of dowel bars, cover blocks of same grade of concrete, preparation of bar bending schedule and getting the same approved from ucil before construction, all complete as per drawings, specification and direction of the engineer-in-charge. thermo-mechanically treated (tmt) bars of grade fe-500d conforming to is1786. note for above items. i) the supply of fe 500d tmt bars conforming to is 1786 (latest) shall be fromm/s sail, iisco, rinl, tata steel and jindal from their own plants rolled from virgin material only.ii) reinforcement steel bars from rerollers of the above manufacturers will not be accepted iii) no extra payment shall be made on account of rolling margin and wastage iv) contractor shall supply copies of the documentary evidence of purchase of steel, test certificates from these manufacturers (steel either directly purchased or through their dealers)and also tests from third party, if required, to be arranged at no extra cost.v) welding weights, weight of binding wires etc. shall not be measured for payment but the cost of the same shall be deemed to have been included in the quoted rate.vi) chairs and spacers provided will not be paid extra.vii) preparation of bar bending schedule for reinforcement in all types of rcc structures will be prepared by the contractor and submitted to ucil for approval., supplying, fabricating and installing mild steel anchor bolts / holding down bolts, pipes, sleeves, inserts, hangers, conduits and any other mild steel, cast iron, g.i.cast steel and other fixures including lugs in cement concrete, including necessary templates for keeping them in position and with welding, bending to the required shape, if necessary and prime coat and final painting whereever necessary/applicable, cost of scaffolding, as required, at all leads and lifts, storing, handling, transporting, erection without damage, placing in position, maintaining proper quality control etc. all complete as per drawings, specification and direction of engineer-in-charge. note i) all materials shall be from m/s sail, iisco, rinl and tata steel from their own plants rolled from virgin material only. ii) welding weights, connections, bolts and nuts etc. shall not be measured for payment but the cost of which shall be deemed to have been included in the quoted rate. iii) contractor shall supply copies of the documentary evidence of purchase of steel, test certificates from these manufacturers and also tests from third party, if required, to be arranged at no extra cost. iv) all holes will be made by drilling only. gas cutting of holes will not be permitted. v) electrodes manufactured by m/s advani oerlikon, esab india, indian oxygen and dandh secheron only shall be used., taking delivery from ucil, handling, transporting and installing in cement concrete at all elevations anchor bolts, anchors, pipes, sleeves, inserts, hangers, conduits and any other mild steel, cast iron, g.i.cast steel and other fixures, cost of scaffolding, as required, placing in position, maintaining proper quality control etc. all complete as per drawings, specification and direction of engineer-in-charge.. note i) the fabricated embedded items including lugs etc. shall be supplied by ucil., supplying, fabricating and installing structural steel work conforming to is 2062 (grade e250, quality b0) in all kinds of work for pipe and cable supports at top of dam/embankment at all elevations including straightening of raw steel (if required), cutting, making edge preparation, making connections at fabrication yard by welding / bolting, hoisting, fixing in position by welding / bolting, cleaning and preparation of all steel, storing, loading, transportation, unloading, delivery at erection site, maintening proper quality control, surface preparation for painting, erection, alignment and connections of all structures true to line, level, plumb and dimension including rectification, if any, splicing, applying a primer coat of approved make before erection and two coats of final paint of approved make after erection and final alignment, preparation of design d
Agency / Dept :
uranium corporation of india limited UCIL
Due Date :
Sep 03, 2026 (3 days left)
Tender Value :
172Cr
View Documents
T18 Ref No : 16941300
Location : kalyan , maharashtra
LIVE TENDER
tender for wooden packing 1200 x 300 x 150 mm for m -wooden packing 1200 x 300 x 150 mm for making lead bearing working with hydraulic jacks for use of rarv / tool van capable to withstand 140 mt load of seasoned sal wood /sheeshm wood chemically treated with red oxide paint and both end secure by 30 mm x 5 mm iron strip or its equivalent. , wooden packing 1200 x 300 x 150 mm for making lead bearing working with hydraulic jacks for use of rarv / tool van capable to withstand 140 mt load of seasoned sal wood /sheeshm wood chemica lly treated with red oxide paint and both end secure by 30 mm x 5 mm iron strip or its equivalent.
Agency / Dept :
central railway CR
Due Date :
Sep 14, 2026 (14 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16919802
Location : hassan , karnataka
Source : GEM Tenders
LIVE TENDER
tender for river sand , surkhi , lime , brick bats of 20 mm , jaggery , antuwalakai , kadukkai , grinding machine hiring including fuel charges , grinding machine , lime mixing machine , size stone , special size bricks , rubbles stone , modular common brunt clay bricks , cement mortar , trowel sharp edge - blades , trowel curve edge , wooden float , plastic buckets 25 liters , aluminium screed 2inchx1inchx5feet , aluminium screed 2inchx1inchx3feet , curing pipe one inch 100 meter , saw blade , rubber hand gloves set , cloth hand gloves set , gumboots , safety helmet , safety goggles , shovel , pvc round pan , sieving mesh , plastic water storage pot , water storage plastic drums , pvc water drum 2000 liters capacity , 2 hp motor , tarpaulin sheet , disposable face mask , safety belt , hammer 2kgs head with handle , chisel , sharping charges of chisel , gunny bags , aluminium wire 90m coil , switch box 4 module, switch and socket , bulb led 18w , pointing trowel , wire brush , coir brush , transportation of materials , 50mm dia and 5mm thick hollow ms pipe , 2 nos ms steel 15mm thick inter lock chainage , synthetic enamel paint , carriage of rubbish item, supply of good quality river sand (coarse and fine) required for lime works shall consist of natural sand, shall be hard, durable, clean and free from adherent coatings and organic matter, shall not contain the amount of clay not more than 5percentage by mass, free from silt, shall not contain any harmful impurities such as iron pyrites, alkalis, salts, coal or other organic impurities to affect adversely the hardening, strength or durability of the mortar, supply of good quality 1st class surkhi used as fine aggregate in lime mortar. surkhi, powdered broken brick, prepared by pozzolanic material well burnt good quality bricks and clay balls, finely grinded, powdered, free from under burnt particles of soluble salts, more resistant to alkalis and salt solutions, pyrites and adherent coatings of soil or silt, used for making waterproofing, lime mortars and, lime concrete, including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications .( test reports as per is standard from recognised govt agency and the material sample approval should be taken from the office before supplying), supply of good quality un slaked lime directly from quarry not more than 15 days required for preparation of lime putty in traditional method on the process of slaking, from non-hydraulic lime silica and alumina in quantities of less than 15percentage in lime will be accepted, used for masonry mortars, lime concrete and plaster undercoat, minimum 1.25n mm square compressive strength for 7days, etc., including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications, supply of good quality 20 mm brick bats obtained by crushing well-burnt clay bricks of class designation 7.5, hard, sound, and free from under-burnt particles, soluble salts, pyrites, dust, soil, and other deleterious matter, graded to pass through a 20 mm sieve and retained on a 10 mm sieve, suitable for use as coarse aggregate in lime mortar and lime concrete, including loading, transportation, unloading, stacking, all labour, and incidental charges complete as directed by the engineer-in-charge and as per specifications, supply of good quality jaggery, ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the work in charge, supply of good quality antuwalakai (soap nut and feronia additive as locally approved), clean, dry and free from impurities, suitable for preparation of traditional lime mortar to improve workability, durability and bonding properties in conservation works, as directed by the engineer-in-charge, supply of good quality kadukkai - mature, clean and free from foreign matter, suitable for use as a traditional additive in lime mortar for improving strength, durability and water resistance in conservation works, as approved by the engineer-in-charge, grinding machine hiring including fuel charges providing and hiring heavy-duty grinding machine in good working condition, complete with all accessories, suitable for grinding lime, surkhi and other approved materials required for conservation works, including fuel and operational requirements, providing and hiring portable grinding machine in good working condition, complete with necessary accessories, suitable for grinding small quantities of lime mortar ingredients and other approved materials for conservation works, including fuel and operational requirements., lime mixing machine hiring including fuel charges providing and hiring lime mixing machine of adequate capacity, diesel or electrically operated, in good working condition, suitable for uniform mixing of lime mortar for conservation works, complete with all necessary accessories including fuel wherever applicable, size stone 300mm x 300mm x 250mm, bond stone 350mm x 500mm x 250mm size supply of hard, sound and durable natural size stones and bond stones, obtained from approved quarries, free from cracks, weathered portions, laminations and other defects, accurately dressed to the specified dimensions with true beds and joints. the stones shall conform to the provisions of is 1597.size stones shall be used for wall face masonry and structural hearting, while the bond stones shall be provided as tie stones for effective transverse bonding, interlocking and strengthening of masonry in conservation works and the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, special size bricks 220mmx120mmx40mm- should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952 the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, rubbles stone for backfilling 15cm x 22.5cm- supply of hard, sound and durable natural rubble stones of minimum size 150 mm x 225 mm, obtained from approved quarries, free from cracks, weathered portions and other defects, hammer dressed in accordance with is 1129 and conforming to is 1597 (part 1). the stones shall have a minimum thickness of 225 mm, be laid with the broadest face on the prepared bed to achieve proper interlocking, with joints tightly packed using stone spalls. the finished pitching shall be suitable for dry or grouted stone pitching in conservation works and slope protection, the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, modular common brunt clay bricks of class designation 7.5 - should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952, cement mortar 1 into 4 where 1 part cement to 4 parts sand-ratio in which specify clean dry sand mention water as needed for workability also note its uses for example bricklaying blockwork and tile bedding and including material quality where opc cement type and standards like is codes in india ensuring consistency with measured proportions for strength., trowel sharp edge blades hardened and tempered highcarbon steei for durabitity staintess steei for rust resistance. handles smooth and seasoned hardwood or pvc. should be in accordance with lndian standards ls 1630 1984., trowel curve edge - blades hardened, tempered high-carbon steel for durability stainless steel for rust resistance. handles smooth, seasoned hardwood or pvc. should be in accordance with indian standards is 1630 (1984)., supply of wooden float of size 300 mm x 150 mm, manufactured from seasoned hardwood such as teak, pine, sheesham or equivalent, having a 10 to 15 mm thick smooth, flat base with slightly bevelled edges and fitted with an ergonomically designed top mounted wooden or high impact composite handle securely fixed with screws or resin bonding. the float shall be lightweight, durable and moisture-resistant, suitable for levelling, compacting and finishing lime mortar, plaster and concrete surfaces in conservation works, complete as approved by the engineer in charge, plastic buckets 25 liters - high-durability specifications to withstand rough handling, heavy loads, and exposure to construction materials like lime, mortar, and sand. made from high-density polyethylene (hdpe) or polypropylene (pp), offering impact resistance, chemical resistance, and uv protection for outdoor use. (the material sample approval should be taken from the office before supplying), aluminium screed 2inchx1inchx5feet supply of aluminium screed of size 2 inch x 1 inch x 5 feet, manufactured from high-strength extruded aluminium section, straight, lightweight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime concrete and plaster surfaces in conservation works, complete as directed by the engineer-in-charge, aluminium screed 2inchx1inchx3feet supply of aluminium screed of size 2 inch x 1 inch x 3 feet, manufactured from high-strength extruded aluminium section, lightweight, straight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime mortar and plaster surfaces in conservation works, complete as approved by the engineer-in-charge., curing pipe one inch 100 meter -supply of flexible pvc hose pipe of 25 mm (1 inch) diameter and 100 metres length, manufactured from premium quality pvc, weather-resistant, leak-proof and capable of withstanding normal working pressure, suitable for curing masonry, plaster and concrete works, complete with standard fittings wherever required, supply of industrial quality circular saw blade of 10inch diameter with 30 mm bore, manufactured from high-grade hardened and tempered alloy steel with 40 precision-ground teeth, heavy duty steel plate and optimized kerf width, provided with thermal expansion slots and friction-reducing coating for smooth, stable and reliable cutting with extended service life. the blade shall be easy to installation , suitable for cutting wood, plastics and non-ferrous metals, and compatible with professional cutting machines, complete as approved by the engineer in charge., rubber hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., cloth hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., gumboots should meet requirements such as water impermeability puncture resistance and slip resistant soles safety or protective footwear en iso 20345. it has a minimum impact resistance of 200 joules and compressive strength of at least 15 kn at the toe cap. the material sample approval should be taken from the office before supplying., safety helmet strong, rigid materials like high density polyethylene hdpe, abs, or polypropylene pp, dome shaped, without metallic parts, uv resistant. harness system suspension, impact absorption, penetration resistance, electrical insulation class g general, temperature resistance, standards and certifications is 2925the material sample approval should be taken from the office before supplying., safety goggles- should be impact-resistant polycarbonate lenses, uv protection, anti-fog scratch coatings, and a wraparound side-shield design for full coverage, fitting snugly and comfortably with ventilation, often meeting standards like ansi z87.1, ensuring protection from debris, dust, and radiation for construction environments. (the material sample approval should be taken from the office before supplying), supply of industrial quality multi purpose folding shovel manufactured from high strength metal, rugged, lightweight and corrosion-resistant, suitable for digging, chopping, scooping, hammering and scraping applications. the shovel shall be foldable for easy storage and portability, with an overall shovel length of approximately 23.25 inches 59 cm, saw length with handle of approximately 12.5 inches, integrated saw blade length of approximately 5.5 inches 14 cm, maximum weight of 525 g, and conforming to uiaa safety certification or equivalent, complete as approved by the engineer in charge, pvc round pan ghamela in which high grade virgin polyvinyl chloride or heavy duty polypropylene for high strength and flexibility. smooth interior surface crack and impact resistant, weather resistant for both indoor and outdoor use in which generally 5mm to 10mm thickness and shape is round open to top bowl and standard construction sizes usually 15 to 8 inches diameter and 10 kg to 20 kg load capacity. roughly 8 to 12 inches height. the material sample approval should be taken from the office before supplying., sieving mesh with wooden side frame with stand mechanism of size 2 feet x 5feet fabricated with ss304 ss316 stainless steel wire mesh of approved aperture and gauge securely fixed to a rigid hardwood frame teak neem or treated pine resistant to moisture decay and heavy usage. the unit shall be mounted on a sturdy wooden stand mechanism for convenient operation ensuring stability during sieving of sand surkhi lime and other construction materials used in conservation works. the mesh shall be corrosion resistant durable and free from defects complete as approved by the engineer in charge., plastic water storage pot supply of portable water storage pot manufactured from food-grade virgin high density polyethylene hdpe, polypropylene pp or pet plastic, free from bpa and harmful chemicals, suitable for safe storage of drinking and construction water. the pot shall be durable, leak-proof, uv resistant and provided with a tight fitting screw lid and leak proof plastic tap or dispensing arrangement, with integrated top handle or side grips for easy handling and transportation, complete as approved by the engineer in charge, water storage plastic drums 200l to 200 liters capacity, made of hdpe plastic, corrosion resistance, uv stability, and lightweight 8to10 kg empty removable lid with a metal or plastic locking ring clamp for easy filling, cleaning, and access. the material sample approval should be taken from the office before supplying, pvc water drum 2000 liters capacity of 2000 liter pvc water drum or tank typically feature like durable uv stabilized plastic cylindrical shapes varying thickness for strength and offering strong corrosion resistant storage for drinking industrial or agricultural water needs with options for multiple layers and specific fittings., supply of 2 hp single phase electric motor operating on 220to 240 v ac, 50 and 60 hz power supply, delivering 1.5 kw output with a rated speed of 1440 rpm 4pole or 2800 rpm 2pole and full-load current of 9.2 to 12 a. the motor shall be manufactured with 100 percentage copper windings, enclosed in a totally enclosed fan cooled tefc casing with ip55 protection against dust and water ingress, suitable for continuous operation in construction and conservation works, complete as approved by the engineer in charge., tarpaulin sheet 30 feet x 40 feet high-density polyethylene (hdpe) or multi-layered cross laminated (mlcl) materials, often with 120 gsm to 250 gsm (grams per square meter) thickness for durability, 100% waterproof and weatherproof and uv stabilized/protected (essential for long-term outdoor exposure)., disposable face mask supply of disposable 3ply non woven face mask comprising an outer hydrophobic spun bond non woven layer, a middle high density melt blown polypropylene filtration layer with bacterial filtration efficiency (bfe) of 95 to 99percentage, and an inner soft hydrophilic non woven layer for enhanced comfort. the mask shall be provided with high elastic soft ear loops and an integrated flexible plastic or aluminium nose clip to ensure a secure fit and minimize leakage, suitable for protection against dust and airborne particles during conservation and construction works, complete as approved by the engineer in charge., safety belt-- full-body harnesses (fbh) for fall arrest (dorsal d-ring), made from high-tenacity polyester and nylon webbing (min 44mm wide, 3mm thick) that withstands high tensile loads, featuring corrosion-resistant hardware, ergonomic padding, adjustable straps, and certifications like ce bis iso, ensuring comfort, proper fit, and critical fall-arrest force absorption for working at heights as per is 3521. (the material sample approval should be taken from the office before supplying), hammer 2kgs head with handle - head is hardened and tempered, typically ranging from hrc 48 to 58 for optimum toughness and to prevent shattering. square, double-faced, or hexagonal head with flat striking surfaces, handel made up of high-quality hardwood. two-colour carbon fiberglass shaft designed to absorb shock and reduce hand fatigue., chisel made up of high grade alloy steel, chrome vanadium crv steel or carbon steel for high durability. induction hardened tips around hrc 63 to 65. bevel edged, flat or pointed edge. the material sample approval should be taken from the office before supplying., sharping charges of chisel 5nos x 2times providing sharpening charges for 5 numbers of chisels, each sharpened twice, using mechanical grinding equipment to restore the cutting edge and maintain the required sharpness, profile and temper suitable for stone dressing, brick cutting and conservation works, complete as directed by the engineer-in-charge., gunny bags supply of good quality bt will woven jute gunny bags conforming to is 12650 into 2018 (standard btwill) or is 16186 2014 (lightweight sacking), having nominal dimensions of 94 cm x57 cm or 112 cm x 67.5 cm, fabricated from natural jute fibre with 3ply heracles stitched safety seams, durable and free from defects, suitable for storage and transportation of construction materials and for use in curing works during conservation works, complete as approved by the engineer in charge, aluminium wire 90m coil supply of pvc insulated aluminium wire in 90 metre coil of approved size 7 bar 20, manufactured with high-quality aluminium conductor and durable pvc insulation, providing safe, reliable and efficient current flow with good heat resistance. the wire shall be lightweight, flexible and easy to installation , suitable for domestic, commercial and light electrical wiring applications, complete as approved by the engineer-in-charge, switch box 4 module, switch and socket supply of 4 module modular switch box manufactured from fr grade polycarbonate for surface mounting or galvanized iron gi sheet for flush mounting, measuring approximately 135 mm x 75 mm to 150 mm x 90 mm, suitable for accommodating up to 4 modular units comprising switches and sockets. the switches shall have a current rating of 6a bar 10a or 16a 20a 25a as required, with a voltage rating of 240to 250v ac, 50 hz, and the socket shall be 6a or 16a shuttered type with child safety mechanism. the switch box shall be durable, corrosion resistant and suitable for indoor electrical installations, complete as approved by the engineer in charge., bulb led 18w supply of 18 w led bulb suitable for operation on 220 to 240 v ac, 50 hz power supply, having a minimum luminous flux of 1620 to 1908 lumens with an efficacy of 90 to 106 lumens and w. the bulb shall have a power factor of not less than 0.90, colour rendering index cri of 80 ra, surge protection of 2.5 to 4 kv, and an average service life of up to 25,000 hours, suitable for energy efficient indoor illumination, complete as approved by the engineer in charge., pointing trowel supply of professional quality pointing trowel with 150 mm 6 inch long and 75to80 mm wide blade, manufactured from high carbon steel or hardened mild steel with rust-resistant coating and blade thickness of approximately 1.0to1.2 mm. the trowel shall be fitted with a pvc or thermoplastic rubber tpr soft-grip handle of approximately 120to125 mm length, securely attached with a welded or riveted tang, lightweight and durable, suitable for accurate pointing, joint finishing and application of lime mortar in conservation works, complete as approved by the engineer in charge., wire brush supply of heavy-duty wire brush having an overall length of approximately 250 to 300 mm, provided with 3 or 4 rows of hardened carbon steel or iron wire bristles, securely stapled or embedded in a durable hardwood or moulded pvc handle. the brush shall be sturdy, corrosion resistant and suitable for manual cleaning of stone and brick masonry surfaces, removal of loose mortar, dirt, biological growth, rust stains and other surface deposits during conservation works, complete as approved by the engineer in charge., coir brush supply of 10 inch coir fibre handle brush fitted with 100 percentage naturally processed unbleached brown coir fibre bristles of 63 to 76 mm length, densely packed for effective scrubbing, securely fixed to a seasoned hardwood or country wood ergonomic handle. the brush shall be resistant to water, diluted acids and lime wash, biodegradable and free from plastic components, suitable for cleaning stone and brick masonry surfaces, removal of loose dust, lime deposits and surface contaminants during conservation and restoration works, complete as approved by the engineer in charge., transportation of materials providing transportation of approved construction materials from the source of supply to the work site by suitable vehicles, including safe loading, unloading, handling and stacking, ensuring the materials are protected from damage, contamination and moisture during transit, complete as directed by the engineer-in-charge., 50mm dia and 5mm thick hollow ms pipe supply of 50 mm diameter and 5 mm thick mild steel (ms) hollow pipe conforming to is 1161 or is 4923, manufactured from low carbon steel by the electric resistance welded (erw) process or seamless construction, having a minimum yield strength of 240 mpa and tensile strength of 410 mpa. the pipe shall be supplied in standard lengths, true to size, straight, free from dents, cracks and surface defects, with black or hot-dip galvanized finish as specified, suitable for fabrication of grills, railings, fencing, supports and other structural components in conservation works, complete as approved by the engineer-in-charge, 2 nos ms steel 15mm thick inter lock chainage supply of 2 numbers of mild steel ms interlocking chainage plates, manufactured from 15 mm thick ms plates conforming to is 2062 grade e250 a andb, precision cut by laser or cnc process and provided with accurately machined interlocking arrangement for secure and slip free coupling. the plates shall have a minimum yield strength of 250 mpa and tensile strength of 410 to 540 mpa, with high visibility engraved or punched chainage markings as per approved drawings, suitable for alignment, chainage marking and structural applications in conservation works, complete as approved by the engineer in charge, supply of synthetic enamel paint based on modified alkyd resin, having a high gloss finish minimum 85 percentage at 60 degree angle, with 40to 45percentage volume solids and suitable viscosity for brush, roller or spray application. the paint shall provide a dry film thickness of 20 to 35 microns per coat with a theoretical coverage of 10 to 15 m square per litre per coat, and shall be compatible with approved enamel thinners. it shall possess good adhesion, flexibility, resistance to moisture, water, oils, mild industrial fumes and intermittent salt spray and suitable in conservation works, complete as approved by the engineer in charge, carriage of rubbish item providing carriage of rubbish, debris, dismantled materials and other unserviceable waste generated during conservation works from the work site to an approved disposal location by suitable means of transport, including safe loading, unloading and disposal in accordance with local regulations, ensuring the monument premises are kept clean and free from obstructions, complete as directed by the engineer-in-charge.
Agency / Dept :
archaeological survey of india ASI
Due Date :
Sep 11, 2026 (11 days left)
Tender Value :
34.41L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16742579
Location : chhota udaipur , gujarat
Source : GEM Tenders
LIVE TENDER
tender for tools and equipments - different type of engine bearing model 10 different types on board , different type of piston model 5 different types on board , drilling machine electric portable 10 mm capacity , spanner t.flex for screwing up and unscrewing inaccessible position , straight edge gauge 2 ft. , torque wrench 5 to 35 nm , torque wrench 12- 68nm. , lifter valve spring , car jet washer with standard accessories, with pressure adjustable brass nozzle , drilling machine electric portable 15 mm capacity , spanners socket with speed handle , telescopic gauge , thermostat , valve spring compressor universal , electrode drying oven thermostatically controlled temperature 0 to 250 c 10 kg cap , co2 cylinders , argon cylinders , anvil 24 sq. inches working area with stand , swage block 5048 , cast iron 16 x 16x 16 inch , magnetic particle testing machine , water cooled induction welding brazing machine , plastic welding machine with hot air gun, , swagging and flooring tool kit 45 degree tubing 1by8 to 3by4 inch , welding cds processes and inspection methods , extractors screw stud sizes 1 to 8 set , profile gauges plate type for demonstration metric standard , boring bar indexable with insert 1inch shank , medium carbon heat treated alloy steel metric studs and bolts along with nuts , gear - spur old damaged to fit 50 mm shaft dia , carrier for mounting components such as pb and relay boxes , line tester or neon tester 5oo volt heavy duty electric testing , steel tape 5 mt flaxible in case , bradawl 150 mm x 6mm square pointed , auto transformer 15 amps , hydraulic crimping tool for ug 20sq mm to 250sq mm cable crimping with bits , bending machineconduit pipe ,suitable for 15 mm,18 mm,25 mm and 30 mm pipe , crimping tool for crimping 16 sq mm to 95 sq.mm , small crimping tools assorted 10 to 100 mm 5nos set , crimping tools for network cable , insulator shackle types including hardware fitting , insulator suspension type including hardware fitting , ladder -tower 3 meters on tyre wheels - min 10ft - max. 30ft , rechargeable battery 12v,100ah , solar panels 250 wp , solar charge controller with manual switch day lighting 12 v 10 a , ev charger 3 phase input , ev charger home 1 phase input , star delta strater manual , star delta strater semi-automatic , star delta starter automatic for 7.5 hp 440 3 ph induction motor , automatic reverse forward starter , direct on line starter single phase , battery storage lead acid- 12v 75 ah , solar street light lamp set 12v 18 or 24 watts , transformer single phase 1 kilo watt hour 250 and 100 v , washing machine semi automatic 5 kg , refrigerator 165 litre using 134a refrigerant , split type ac 1.5 ton inverter technology , dmx controller , coil winding machine manual , metal rack 100 cm x 150 cm x 45 cm , fire extinguisher-co2 type , fire bucket sand bucket , registered domain at least 100 mb web space , onile centralized ups with 5kva capacity, different type of engine bearing model 10 different types on board, different type of piston model 5 different types on board, drilling machine electric portable 10 mm capacity, spanner t.flex for screwing up and unscrewing inaccessible position, straight edge gauge 2 ft., torque wrench 5 to 35 nm, torque wrench 12- 68nm., lifter valve spring, car jet washer with standard accessories, with pressure adjustable brass nozzle, drilling machine electric portable 15 mm capacity, spanners socket with speed handle, telescopic gauge, thermostat, valve spring compressor universal, electrode drying oven thermostatically controlled temperature 0 to 250 c 10 kg cap, co2 cylinders, argon cylinders, anvil 24 sq. inches working area with stand, swage block 5048 , cast iron 16 x 16x 16 inch, magnetic particle testing machine, water cooled induction welding brazing machine, plastic welding machine with hot air gun,, swagging and flooring tool kit 45 degree tubing 1by8 to 3by4 inch, welding cds processes and inspection methods, extractors screw stud sizes 1 to 8 set, profile gauges plate type for demonstration metric standard, boring bar indexable with insert 1inch shank, medium carbon heat treated alloy steel metric studs and bolts along with nuts, gear - spur old damaged to fit 50 mm shaft dia, carrier for mounting components such as pb and relay boxes, line tester or neon tester 5oo volt heavy duty electric testing, steel tape 5 mt flaxible in case, bradawl 150 mm x 6mm square pointed, auto transformer 15 amps, hydraulic crimping tool for ug 20sq mm to 250sq mm cable crimping with bits, bending machineconduit pipe ,suitable for 15 mm,18 mm,25 mm and 30 mm pipe, crimping tool for crimping 16 sq mm to 95 sq.mm, small crimping tools assorted 10 to 100 mm 5nos set, crimping tools for network cable, insulator shackle types including hardware fitting, insulator suspension type including hardware fitting, ladder -tower 3 meters on tyre wheels - min 10ft - max. 30ft, rechargeable battery 12v,100ah, solar panels 250 wp, solar charge controller with manual switch day lighting 12 v 10 a, ev charger 3 phase input, ev charger home 1 phase input, star delta strater manual, star delta strater semi-automatic, star delta starter automatic for 7.5 hp 440 3 ph induction motor, automatic reverse forward starter, direct on line starter single phase, battery storage lead acid- 12v 75 ah, solar street light lamp set 12v 18 or 24 watts, transformer single phase 1 kilo watt hour 250 and 100 v, washing machine semi automatic 5 kg, refrigerator 165 litre using 134a refrigerant, split type ac 1.5 ton inverter technology, dmx controller, coil winding machine manual, metal rack 100 cm x 150 cm x 45 cm, fire extinguisher-co2 type, fire bucket sand bucket, registered domain at least 100 mb web space, onile centralized ups with 5kva capacity
Agency / Dept :
department of employment and training DET
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16209732
Location : ranchi , jharkhand
tender for refrigerator for laboratory and pharmaceutical use. 490-520 lts, refrigerator for laboratory and pharmaceutical use. 490-520 lts capacity, single door. it sho uld be suitable for storage of medicines, vaccines and pharmaceutical/ laboratory use products at fixed ran ge of temperature i.e 2 to 8 degree celsius. operating temperature range of the inner chamber must be wi thin 2 to 8 degree celsius at whole chamber uniformly. control panel setting- thermometer, main switch an d temperature selection. having 4-5 nos of adjustable shelves inside the chamber. having 4 wheels for mob ility. inner body made of pre treated galvanized iron. having led light for better visibility inside the chamb er. net storage capacity having 490-520 ltrs or more. having front opening glass door with hinged door. h aving door locking system. it should have 4 in built electronic alarm system for that activate in case of tem perature deviation, door opening, sensor failure and during compressor failure. it should be workable in wid e range of voltage like 110 v-280 volts, even in voltage fluctuation. one number of separate suitable capaci ty voltage stabilizer to be supplied with the refrigerator. the fridge should have silent evaporator fan for ev aporation. the refrigerator should have 60 days data logging facility to monitor the temperature. refrigerat or should be iso and ce certified. - warranty period: 24 months after the date of delivery pl code : 823015100011
Agency / Dept :
south eastern railway SER
Due Date :
Jul 20, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16448737
Location : sikar , rajasthan
Source : GEM Tenders
corrigendum tender for capacity 20 to 160 mm , cylinder liner dry and wet liner press fit and slide fit , depth micrometer 0 to 25 mm , dial gauge type 1 gr a complete with clamping devices and with magnetic stand , different type of engine bearing model , different types of piston model , dividers with spring 150 mm , drift punch copper 150 mm , drill point angle gauge , drill twist 1.5 mm to 15 mm various sizes by 0.5 mm , electric soldering iron 60 watt 230 v , electric soldering iron 25 watts 230 v , electric testing screw driver , engineers stethoscope , feeler gauge 20 blades metric , file flat bastard 200 mm , file half round second cut 200 mm , file square second cut 200 mm , file square rough 300 mm , file triangular second cut 150 mm , files assorted sizes and types including safe edge file 20 nos , flat file second cut 250 mm , flat file bastard 350mm , fuel injection pump diesel in line , fuel injection pump dismantling tool kit universal vice , fuel injection pumps ve pump distributor fuel rotary pump dpc pumps along with special tools and accessories , glow plug tester , surface plate l 1600 w 1000 mm c i granite with stand and cover , grease gun , growler , hacksaw frame adjustable type 200 to 300 mm , hammer ball pein 750 gm , hammer chipping 250 gm , hammer copper 1 kg with handle , hammer mallet , hand operated crimping tool wire up to 4 mm , hand operated crimping tool wire up to 10 mm , hand shear universal 250 mm , hollow punch set of seven pieces 6 mm to 15 mm , injector cleaning unit technical , injector testing set hand tester , lifting jack screw type 3 ton capacity , lifting jack screw type 5 ton capacity , lifting jack screw type 20 ton capacity , magnifying glass 75 mm , marking out table l 90 w 60 h 90 cm , multi meter digital , oil pump gear type pump for lmv , oil pump rotor type pump for lmv , oil stone l 15 w 5 h 2.5 cm , oscilloscope 20 mhz , micrometer outside 50 to 75 mm , micrometer outside 75 to 100 mm , pipe flaring tool , piston ring compressor , pliers round nose 150 mm , portable electric drill machine , prick punch 150 mm , punch number 4 mm , rivet sets snap and dolly combined 3 mm 4 mm and 6 mm , scraper flat 250 mm , scraper half round 250 mm , scraper triangular 250 mm , scriber with scribing block universal , set of stock and dies metric , tinmans shear l 450 mm w 600 mm , sheet metal gauge , tinman s shear 300 mm , soldering copper hatchet type 500 gm , solid parallels in pairs different sizes in metric , spanner clyburn 150 mm , spanner t flocks for screwing up and up screwing inaccessible , spanner adjustable 150 mm , spark lighter , spark plug spanner l 14 mm w 18 mm size , steel rule 150 mm inch and metric , straight edge gauge 2 ft , straight edge gauge 4 ft , tachometer counting type , tandem master cylinder with booster working model , taps and dies complete sets b a , taps and dies bsw various type in inch , tap and dies set metric size 03 to 24 mm , taps and die set bsf various type in inch , taps and dies width worth fine , timing lighter new brand , torque wrenches 5 to 35 nm , torque wrenches 12 to 68 nm , torque wrenches 50 to 225 nm , tyre pressure gauge with holding nipple , universal puller , v block l 75 w 38 mm pair with clamps , valve lifter , valve spring compressor universal , vernier caliper 0 to 300 mm with least count 0 point 02 mm , water pump new brand , wire gauge metric , vices of 120 mm jaw , air conditioned crdi vehicle new brand lmv bs vi with abs and speed limiter , arbor press, mechanic diesel lab items, allen key set of 12 pieces with hex key sizes 2 to 14 mm made from forged steel alloy carbon steel, caliper inside 150mm spring made of carbon steel gauging point should be heat treated, centre punch 10mm dia x 100 mm round knurled body made of alloy steel gauging point should be heat treated, screw driver 250 x 9 mm flat tip size 8 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, properly heat treated., hammer ball pein, head weight 500 gm made from forged carbon steel, face heat treated. with wooden handle, hand file 200mm second cut, made of heat treated tool steel with wooden handle., philips screw driver 100 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip with neon tester., philips screw driver 150 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 200 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 250 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 300 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, pliers combination 200mm insulated with moulded sleeves of high voltage grade, made from drop forged alloy steel with side cutting facilities, properly heat treated., screw driver heavy duty 200mm x 9 mm flat tip size 9 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., screw driver heavy duty300mmx 9mm flat tip size 10 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., spanner d.e. 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanner ring 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanners socket with speed handle, t-bar, ratchet and universal up to 32 mm set of 28 pieces with box. made from forged carbon steel., steel rule 300 mm. metric, english both graduation made of stainless steel with conversion table engraved, as per drawing l 150 mm w 200 h 400, wire cutter & stripper 150 mm made of high carbon steel , wire stripping capacity up to 6mm, spanner adjustable 350 mm blade, made from alloy steel, workshop grade, 1 should be trigger operated blow gun with interchangeable nozzles with metal gun 2 fitted with brass air inlet ferrule 3 suitable for quick removal of chips, dust and particulate from any surface 4 operating pressure 80 to 150 psi 5 high pressure nozzle 6 safety nozzle adaptor 7 crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application 8 low pressure nozzle and supplied with manual, ammeter dc shunt type up to 300 amp the shunts are constructed from high grade managing, air ratchet with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box with manual, air impact wrench with 180 ft lb 244 nm max torque and 7100 rpm and a feather touch trigger two position forward power regulator and conveniently located forward reverse ring provide precise control with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box and manual will be provided. square drive half inch bolt size in the box 9 to 27 mm, angle plate size 200x100x200mm made from close grain c.i. workshop grade., anvil 50 kg. single horn type made from cast steel working face heat treated, face having hardie hole & punching hole, stand made from fabricated angle iron (50 x 50 x 6 mm) height 400 mm, alternator starter with minimum 2 hp ac motor digital auto electrical test bench checking for alternator and starter motor auto electrical test bench checking for alternator and starter motor mild steel frame work table top test bench 2 hp and 3 phase1440 rpm motor induction motor suitable for 50 hz 415 v ac supply with heavy duty transformer for starter testing with light run test variable frequency drive vfd overload capability 150 percentage of rated current 60 seconds built in pid simplify the establishment of a closed loop control system key lock and function selection communication port rs 485 4 point 3 inch colour hmi for indication for voltage and current 2 ch analogue input controlled via rs 485 bus utilizing modbus rtu protocol 1 channel dc current input with 75 mv input for shunt 1 channel dc voltage input 200vdc 1 construction of relay output 7a 230vac 2 leds for indicating the power status and signal trans receiving status capable to interface with pc attached with thermal printer communication interface rs485 rtu diode150 a 12 to 24 v 4 nos shunt 200a 75 mv transformer 12v 200 a 24 v 150 a 1 no transformer 0 to 240 v primary 12 to 0 to 12 v secondary 1 no mains supply 415 v ac 3 phase 50 hz ac power supply v belt heavy duty banana terminals on the front panel pulley groove for alternator checking heavy duty rugged vice for mounting alternator and starter operation manual should be provided, voltage 12v input volt 230v 50hz output volt 12 v dc capable for 5ah 35ah battery charged rotary swicth to select volt and amp ammeter display and main switch plus minus knob crocodile connector with wire 2 ft in length aligator clips high current charging upto 15 ampere circuit breaker for reverse battery auto cut off after charging, blow lamp capacity 1000ml body made from brass. with inclined burner type, should be used on vehicle belts where the manufacturer specifies the timing belt tension to be set at a specific location on the belt span between pulleys should have clear incremental markings with knurled knob for accurate measurement. should speed up timing belt installation .measurement range 0 to 80 kg 750 newton supplied in a foam inlay box, power supply electrical electrical cable m 5 mtr working pressure bar 8 to 12 kg cm2 hose length m 10 mtr suction and discharge each motor rpm 2800 rpm flow rate l h 8 to 12 lpm phase 1 phase 3 hp 230 volt suitable for cold water spray gun standard number of pistons plungers 3 pressure gauge auto stop facility for power saving suitable guns for water and foam sprey water filter pressure regulating valve for increasing and decreasing output pressure the operating unit should be mounted on a ms structure trolley type starter switch caster wheel 2 nos water pipe inlet and out let, automatic double pawl braking system capacity range 1- 3 ton fully forged hooks are fitted safety latches shield bearing zinc plated hand chain as standard standard lift 3 meter effort required to lift 3 ton load- 30 kg. with tripod stand & standard accessories., chisel flat 100mm, made of forged steel. point heat treated., circlip plier internal 150 mm drop forge alloy steel heat treatment moulded sleeve . ., circlip plier external 150 mm.drop forge alloy steel heat treatment moulded sleeve ., circlip plier internal 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., circlip plier external 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., clamps c 100mm, made of forged steel., clamps c 150mm, made of forged steel., clamps c 200mm, made of forged steel., tray cleaning 450 into 300mm -gi sheet 18 g side handle both border wires, 1 quickconnect adapter push pressure scale 0 1000 psi 0 7000 2 kpareads pressure from 0 to 1000 psi 3 2 to 9 by 16 diameter gauge 4 thumb button air release should be supplied with adapters for suzuki hyundai gm ford isuzu mercedes toyota volkswagen and peugeot compatible for dry test with adptor standard accessories all above items should be placed secured in a blow molded plastic box or metal box, connecting rod alignment fixture height of fixture 450mm connecting rod 40 to 100mm connecting rod alignment fixture checking bent twist offset precision ground surfaceshould be supplied with following accessories bent and twist indicator bending bar with alignerdial indicator and the connecting rod fixture ms iron should be fitted over a base etc with all accessory, soldering iron copper bit weight 250gm hatchet type with handle, cylinder gauge, bore dial gauge with accessories 20-160 mm least count 0.01 mm self cantering with interchangeable mounted head complete., technical specification cylinder liners of following types dry liner for engine cylinder press fit type wet liner for engine cylinder with rubber o ring slide fit liner piston with ringstandard features, micrometer depth 0 to 25mm lc 0 point 01mm carbide tipped on measuring face made from alloy steel complete in box, dial gauge indicator l.c. 0.1 mm ran- ge 10mm dial graduation 0-50-0 balance plunger type dial & holder. magnetic base with on-off switch, fine tolerance setting arm, stem dia. as per dial indicator, complete set in dial gauge., the model will made out of different type of engine bearing suitable for engine 1 shell bearing for crankshaft with main journal and big end journal 2 thrust bearing for crankshaft 3 ball bearing for crank shaft 4 bush bearing for connecting rod 5 needle bearing for connecting rod 6 bush bearing for camshaft & rocker arm 7 shell bearing for overhead cam shaft 8 needle bearing for rocker arm 9 name mention of each bearing on board, the model will be made out of different type of piston model. 01set concave head dome head flat head solid skirt recessed head light weight model for easy shifting. piston will be mounted on a wooden board name mentioned of each type the piston.and constructional diagram details printed on to a colourful panel with details of applications the item will be supplied in a dust proof box & covered by the acrylic sheet., divider spring joint 150mm, made of alloy steel., drift punch copper 150mm made by copper, drill point angle gauge made by drop forged steel., twist drill straight shank high speed steel 1.5 to 15mm by 0.5mm set 10pcs. high carbon steel &heat treated., soldering iron 60 watt, 230 v.a.c. standard length of mains lead with 3 pin top, bit made from copper., soldering iron 25 watt, 230 v,.a.c. standard length of mains lead with 3 pin top, bit made from copper., neon tester 500 volt heavy duty insulated. handle made from transparent cellulose acetate with plated metal clip. blades made from selected steel chrome & insulated., engineer s stethoscope with standard accessories, feeler gauge set of 20 blades metric, different sizes, length of blades 100 mm, made from alloy steel., file flat 200mm bastard made of heat treated tool steel with wooden handle., file half round 20cm second cut, made of heat treated tool steel with wooden handle., file square 200mm second cut, made of heat treated tool steel with wooden handle., file, square 300mm rough, made of heat treated tool steel with wooden handle., file triangular 150mm second cut, made of heat treated tool steel with wooden handle., files assorted sizes and types including safe edge file (20 nos), made high carbon/high speed steel. size (150 mm)., file flat 250mm second cut, made of heat treated tool steel with wooden handle., file flat 350mm bastard, made of heat treated tool steel with wooden handle., fuel injection pump (diesel) inline complete pump assembly suitable for 4/6 cylinders diesel engine rsv mechanical or pneumatic governor type the item will be supplied on suitable plywood and collared with attractive colour. a dust proof wooden box & covered by the acrylic sheet., fuel injection pump dismantling tool kit 1. universal vice 2. pre stroke setting attachment with gauge, 3. pump couplings, 4. control setting gauge with attachment, 5 .tappet adjusting spanner (thin),6. ring wrench,7. tappet lifter, 8. mechanical finger (gripper), 9. adapter capsule box for fip, 10. thread puller for fly weight, 11. drift for bottom plug, 12. impact screw driver, 13. flower/trox allen key set, 14. attachment for setting angle of accelerate lever, 15. coupling for fip cam, coupling wrench, 16. round nut spanner different type, 17. ve pump holding attachment, 18. inline and rotary pump holding attachments,19. drift for installing and removing oil seal, 20. holder spanner, 21. spring locking plates, 22. governor weight remover., fuel injection pump in diesel type distributor fuel rotary pump with dpc complete pump assembly compatible for 4 cylinders diesel pump operated by handle and constructional diagram details printed on to a colourful panel with details of applications will be supplied with along with all tools and special tools and accessories for dismantling and assembling fuel injection pump special tools 1 extra long socket 2 mounting stand for ve pump distributor fuel rotary pump dpc pumps 3 injection pump special socket 4. coapling for ve pump distributor fuel rotary pump dpc pumps 5 testing jig 6two pin spnner 7 huk spanner 8.pump nozzle refting tool, power input 8point 5 to 15 volt max current 80 ampere, surface plate made of closed grain seasoned cast iron/ granite 1600 mmx 1000 mm grade 1, with calibration test certificate, complete with top cover, side handle. m.s. fabricated standard height stand with leveling screws ., grease gun pressure type 500 gm. capacity hand operated, manufactured from tin plate with steel pump with fixed spot., growler general & internal set suitable to test d.c. armature and ac motor starter rating supply ac. 250volt 50hz., hacksaw frame adjustable type 200-300mm with blade & handle., hammer ball pein head weight 750gm made from forged carbon steel, face heat treated. wooden handle fitted, hammer chipping 250gm with handle, one side chisel and other side pointed end type hard and tempered, steel handle about 250 mm long., hammer copper forged head weight 1000gm with fibre glass handle,, hammer mallet head dia.100 mm. made from wood with handle., hand operated crimping tool for crimping up to 4 mm, hand operated crimping tool for crimping up to 10 mm, hand shear universal( straight snip ) 250 mm, made from drop forge steel. cutting edge hard & tempered., punch hollow, hole dia 6 to 15 mm set of 7 pieces made from alloy steel, main unit power supply ac 220v plus minus 10 percent 50hz ultrasonic cleaner power 30 to 50w ultrasonic bath inner body material stainless steel simulated rpm range 10 to 9990 rpm step 10 rpm time range 1 to 9999 pulse width 0 point 5 to 25 ms step 0 point 1ms fuel tank capacity 2 to 4 ltr no of glass tube 4 nos with marking glass tube holder and manifold moc aluminium display type led suitable for all types of petrol injectors and gdi gasoline direct injection injectors achieve automatic cleaning and testing of injectors the machine should be capable to perform flowing test uniformity/spray ability test will be able to test the uniformity of injecting amount of each injector and to monitor the spraying status of each injector with the help of backlight leakage test will be able to test the sealing and dribbling conditions of injectors under system pressure injecting flow test will be able to check the injecting amount of the injector in 15 seconds of constant injection auto test will be able to test injectors by simulating different working conditions ultrasonic cleaning will be able to perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely, for nozzle sizes presser gauge 0 to 400 kgf cm2 standard accessories steel aluminium fuel container with filter manual hand operating lever handle with grip. along with split pin three way shut off valve with valve spindle. suitable fuel pipes for all injector, lifting jack screw type 3 ton capacity for vehicle 3048 kg road open height 13 inch closed 4 inch dia of screw 1 point 25 inch with bearing type lifting jack, lifting jack screw type 5ton capacity for vehicle 5048 kg road open height 13 closed 7 inch dia of screw 1 point 50 inch with bearing type lifting jack, lifting jack screw type 20 ton capacity road open height 14 inch closed 7 dia of screw 1 point 75 inch to 2 point 0 inch square threads with bearing type, magnifying glass 75mm with handle, marking table made from seasoned close grain c.i. 90cm x 60cm x 90cm. workshop grade with test certificate. with steel handle both side, levelling screws & cover. m.s. fabricated stand in standard size, digits 3 and half digit display lcd display with large digits for easy visibility voltage range ac up to 750v ac voltage range dc up to 1000v dc ac and dc current range up to 20a resistance measurement up to 200 mohm with capacitance frequency diode transistor test audible continuity test data hold facilities, 1. gear type pump for lmv this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine, 1. rotor type pump for lmv. this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine., stone oil 15 x 5 x 2.5 cm. one side rough & one side smooth., analog oscilloscope 20 mhz two channel 4 trace monochrome display 1 general portable rugged including features of component tester and in built frequency counter 2 bandwidth dc to 20 mhz 3d b 3 of channels two channels 4 deflection coefficient in calibrated steps from 5 mv to 5 v cm 5 rise time 17 point 5 ns 6 variable hold off for stable triggering 7 input impedance 1 mohm 25 pf 8 time base coefficients 18 calibrated steps 0 point 5microsec per cm to 0 point 2 sec cm with 5 magnifier to 100ns cm 9 trigger system automatic and normal level adjustable 10 source ch i ch ii alt line external 11 slope positive negative 12 coupling ac dc gnd 13 sensitivity 5 mm 14 trigger bandwidth 40 mhz 15 horizontal deflection dc 2 point 3 mhz 3db bandwidth 16 x to y mode phase shift 3 degree up to 60 khz 17 frequency counter range 20 hz to 30 mhz in built 18 computer interface usb 19 resolution 10 hz 10 khz 20 sensitivity 0 to 5v by div 21 attenuation 1 ratio 1 and 1 ratio 20 22 max input voltage 300 v rms cat ii 23 crt 140 mm rectangular with internal graticule and p31 phosphor 0 point 8 mm green colour plexiglass 24 calibrator operator 1 khz square wave 0 point2 vpp for probe compensation 25 z modulation ttl level 26 power supply 230 v plus minus 10 percent 50 hz ac supply component tester built in single touch, micrometer outside 50 to 75 mm l c 0 point 01 mm carbide tipped on anvil and spindle measuring face with spindle lock setting spanner and test piece 50 mm made of alloy steel complete in box with master, micrometer outside 75-100 mm, least count 0.01mm, carbide tipped on anvil &spindle measuring face, with spindle lock, setting spanner & test piece 75 mm, made of alloy steel complete in box with master., flaring tool set single type for tube 4 point 7 to 16 mm o d block and cone made of alloy steel and hard tempered nickel chrome plated able to flaring 1 by 2 inch 7 by 16 inch 1 by 4 inch 3 by 16 inch 3 by 8 inch and 5 by 8 inch o d, piston ring compressor 50 to 150 mm 2 1 by 2 inch wide spring bands equally distributes tension for easy compression for use on all passenger vehicles, pliers combination 200 mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, pliers nose 150mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, drill machine portable electrical 15 mm capacity a c single phase input full load 235 watt rpm 2800 and standard length supply cable and key, prick punch 150mm knurled body made from tool steel tip ground and heat treated, punch number 4 mm made from tool steel hardened set containing set of 9 piece 0 to 9 in suitable container, rivet sets snap and dolly combined 3 mm 4 mm 6 mm hand operated mabe drop forgd steel, scraper flat 250mm made from tool steel tip hardened and ground with wooden handle, scraper half round 20mm made from tool steel tip hardened and ground with wooden handle, scraper triangular 250mm made from tool steel tip hardened and ground with wooden handle, scriber with universal scribes block and accessories, dies set of stock and dies metric dies 3 4 5 6 8 10 12 14 16 and 18 set of 10 made from alloy tool steel dies circular split pattern type with suitable die stock with suitable dies handle dies hardened and tempered complete set in box, heavy duty cast iron body blade length600mm blade material d2 table size 450 mm into 600 mm back gauge attachment table 2t slot paddle spring operated, sheet metal gauge made from alloy steel steel graduation in both system british and metric, tinmans shear 300 mm made from drop forge steel cutting edge hard and tempered, soldering copper hatchet type 500 gms, solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated size 1 by 2 inch accuracy 0 point 0002 inch material made of high quality alloy steel precision ground and hardened product includes one pair of 1 inch into 6 into 1 by 2 into one pair of 1 to 1 by 2 inch into 6 into 1 by 2 inch one pair of 1 to 1 by 4 inch into 6 into 1 by 2 inch one pair of 1 to 3 by 4 inch into 6 into 1 by 2 inch application to be used in setting up work for drilling and milling, spanner clyburn 150mm. made from forged carbon steel. phosphate finish, spanner t flex for screwing up and unscrewing in inaccessible position and size 6 8 10 12 14 set of 5 pcs, spanner or wrench adjustable 150mm. standard pattern selected, made from forged steel heat treated, spark lighter friction type suitable for gas lighting, spark plug spanner size14 into 18 mm made from forged carbon steel, steel rule 150mm metric english both graduation made of stainless steel with conversion table engraved, straight edge 600 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, straight edge 1200 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, tachometer counting type display 5 digit lcd display accuracy plus minus 0 point 05 percent plus 1 digits rpm test range 2 to 99 999 rpm count range 1 to 99 999 counter resolution 0 point 1 rpm 2 to 999 point 9 rpm 1 rpm over 1000 rpm sampling time 0 point 5 sec over 120 rpm detecting distance 50 to 500 mm, this model which will give a complete idea of tandem master cylinder in vehicle and it s function the working model of tandem master cylinder assembly consisting of following minimum parts and practically demonstrable brake disc assembly one caliper assembly brake pad tandem master cylinder with vacuum booster vacuum pump brake hoses oil reservoir with oil with brake pedal features the model will be mounted on m s stand with good quality paint applications suitable sectioned to demonstrate the internal construction diagram details printed on to a colourful panel operating manual will be provided., taps and dies set b.a. 0 to 10 circular split pattern die & hand tap set of 3 piece made from alloy tool steel with suitable die stock and tap handle. taps and dies hardened & tempered. complete set in box, taps and dies b s w 1 by 4 5 by 16 3 by 8 inch 7 by 16 1 2 5 by 8 3 4 inch 7 by 8 1 inch set of 9 made from alloy tool steel dies circular split pattern type with suitable die stock hand tap set of 3 piece and tap handle taps and dies hardened and tempered complete set in box, tap and dies set metric size 03 to 24 mm 3 4 5 6 8 10 12 14 16 20 22 24 mm set of 12 made from alloy tool steel dies hand circular split pattern type with die stocks tap set having three piece taps with suitable tap handle and according to size taps and dies hardened and tempered complete set in box, taps and die set b s f by 4 5 by 16 3 by 8 inch 7 by 16 1 by 2 9 by 16 5 by 8 3 by 4 7 by 8 1 inch set of 10 made of alloy tool steel tap set of 3 piece circular split pattern die set tap wrenches and die stocks taps and dies hardened and tempered complete set in box, taps and dies width worth fine 1 by 8 inch 3 by 16 inch 3 by 8 inch 1 by 4 inch 5 by 16 inch 7 by 16 inch 1 by 2 inch 5 by 8 inch 3 by 4 inch 1 inch set of 10 made from alloy tool steel dies circular split pattern type with die stock hand tap set of 3 pieces with suitable tap handle. tap and dies hardened and tempered complete set in box, timing lighter with neon bulb for setting of all kind of petrol engine timing illumination angle approx 15 degree strobe tube high intensity xenon tube with cable used for checking ignition timing of petrol engine easily operate on 12v ignition systems 12 volt battery operated focused lens should provide light for high visibility of timing mark suitable for petrol carstwo wheelers handle design be more comfortable and easy to operate manufactured by standard company provided with suitable woodenplastic metal box, torque wrench 5 to 35 nm force, adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 12 to 68 nm force adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 50 to 225 nm force, adjustable by turning knurled handle barrel type rod form chrome plated. brake over type, tyre pressure gauge with holding nipple for measuring 0 to 160 lb by sq inch and 0 to 12kgf by sq cm of tyre pressure, universal puller for removing pulleys bearings, v block 75 into 38 mm pair with clamps v block pair with one clamps 75 into 38 into 50 mm by 75 into 50 into 50 mm made from close grain c i workshop grade, valve lifter valve spring for lifting & realizing of spring automatic ratchet lock c type reversible jaw adaptor for multi valve engines capacity 45 to 145mm throated clearance 250mm big window jaw adaptor for easy replacement of valve collects, valve spring compressor universal suitable for various cylinder head engine models, vernier calliper 300 mm length with metric and inch scale l c 0 point 02 mm four way quadric measurement type made from stainless chrome steel micro lapped hardened and tempered in box, automotive water pump of any multi cylinder water cooled engine for dismantling and assembling colored with attractive color. good finish the model will be fitted on suitable plywood sheet and constructional diagram details printed on to a colourful panel with details of applications, wire gauge made from alloy steel, gauge size 0 to 36 swg graduation in metric, bench vices 12cm jaw body made from close grain sg iron and serrated alloy steel jaw jaw heat treated spindle handle dia grater than equal 10 mm and closed on both end unbrakable materials screw materials en 24, engine type 3 cylinder inline common rail turbo diesel iron block air conditioned type displacement 1500 cc rear wheel drive water cooled engine fuel system common rail direct injection body two box five door wagon transmission type 5 speed manual suspension front independent with coil spring rear independent with coil spring steering type power assisted steering power window all four windows reverse gear sensors. anti theft device gprs inbuilt turning diameter 11 point 6 m ground clearance 180 mm wheel base 2680 mm fuel tank 60 litre s standard accessories owner s manual bs vi with abs and speed limiter, an arbor press is a small hand-operated press. it is typically used to perform smaller jobs such as staking riveting installing configuring and removing bearings and other press fit work removable machined steel anvil provides accurate work support in for slot positions automation grade manual material iron weight 30 to 50 kg usage application industrial capacity 2 ton, exhaust gas analyzer petrol arai approved to check construction of co2 o2 and hc and nox 1 construction of carbon monoxide range 0 to 9 point 999 percent resolution 0 point 01 percent 2 co2 carbon dioxide range 0 t
Agency / Dept :
department of technical education DTE
Due Date :
Jul 30, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15636111
Location : tawang , arunachal pradesh
Source : GEM Tenders
tender for amn bkr inf 30 mt 2615, cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112 1989 make birla gold ambuja ultratech acc jk dalmia or equivalent as per list att under job no 2615, coarse sand free from vegetation, coarse aggregate 20mm graded, coarse aggregate 40mm graded, hardcore 63 90 mm graded, aac blocks of size 600x200x150mm make brikolite ncl nuconor equivalent, mild steel bars of size 8 mm dia conform to is 432 part 1 1982 tmt bar make tata sail jsw or equivalent, mild steel bars of size 10 mm dia conform to is 432 part 1 1982 tmt bar make tata sail jsw or equivalent, mild steel bars of size 12mm dia conform to is 432 part 1 1982 tmt bar make tata sail jsw or equivalent, mild steel bars of size 16 mm dia conform to is 432 part 1 1982 tmt bar make tata sail jsw or equivalent, ms binding wire make tata sail jsw or equivalent, wooden plank for shuttering ii class wood of size 3.0 x0.3 x0.026 m, acrylic emulsion paint of approved brand on new concrete surface of make berger asian nerolac equivalent, wooden scantling various size, oil bound distemper washable quality of proprietary brand of make berger asian nerolac equivalent, wooden log for prop of size 3 mtr long 100mm dia, synthetic enamel paint any colour as directed conforming to is 5-2004 make berger asian nerolac equivalent, painting brush 4 inch isi marked, nails various sizes, ms rhs of size 80x40x3.2, ms plate of size 8mm thick, ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete all as directed, pre painted galvatume aluminium zinc coating gi based corrugated steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa of size 10 feet x3 feet make uniix jindal mectec or eqv brand, ppgi ridge sheet of 0.80mm thick of 90cm wide of make sail tata jindal incl treating galvanised surface, self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos per pkt, hdpe sand bags og colour of size 0.75x0.375x0.15, door size 3.0x2.10m double leaf ms sheet for door 2mm thick frame as specified, door size 1.80x2.10m double leaf ms sheet for door 2mm thick frame chowkat made of steel equal angle iron 55x55x6mm isi grade, ventilator with grill of size 600x400 mm ventilator loop hole frame for steel angle of size 35x35x5mm isigrade, gate size 3.0 mx 2.0m double leaf frame made of anlgeiron 75x 75x6mm isi grade with shutters made of reinforemnt tmt bar 12 mm dia flat iron for stiles, anti corrosive red oxide zinc chromate primer conforming to is 5-2004 make berger nerolac asian or equivalent, white lime, waterproofing compound make pidilite dr fixit fevicol or equivalent, cement based paint snowcem of make berger nerolac asian or equivalent, cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112-1989 make birla gold ambuja ultratech acc jk dalmia or equivalent, brick sub class b, three phase 1.2 hp monoblock pump 430 volt complete with and incl 3 mtr length required size flexible suction pipe, mild steel bars of size 12mm dia conform to is 432 part 1 1982 tmt bar make tata sail jsw or equivalent, air termination single pointed aluminium rod 12 mm dia and 300 mm long, testing point terminal block make of gun metal phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw, aluminium strips 25 x 3.0 mm, galvanized iron strip 32 x 6 mm, earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings, drilled with 2 nos holes for 6 mm dia near one side, charcoal, salt normal, ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame., nut bolt 6mm dia 30 mtr dia with check nut and washer, gi pipe 40mm dia mtr 2.5 mtr make jindal tata kalinga, insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto polycab finolex, wall vertical non woven geotextile 500gsm as separation layer between wall pvc membrane with provision of pvc disk anchor faster, 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness 2, non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive, floor horizontal non woven geotextile 500gsm as separation layer between foundation and pvc membrane, 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc-p water proofing membrane, non woven geotextile 500gsm as protective layer of pvc for pvc membrane, deck slab horizontal non woven geotextile 500gsm as seperation layer between deck slab and pvc membrance, 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness 2, non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive for non woven geotextile 50gsm, high quality adhesive for termination of pvc water proofing membrane at doors ventilators, cement opc 43 grade packed in hdpe bag each 50 kg wt for retaining wall 40.00 mtr x 3.00 mtr height 8 mtr x 3 mtr x 5 nos 40 mtr, coarse sand free from vegetation confirming to is 650 1991, coarse aggregate 40mm graded confirming to is 383 2016, stone boulder 9 inch to 12 inch, pvc pipe 75mm dia 3 mtr long
Agency / Dept :
indian army
Due Date :
Jun 12, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Treating Iron. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Treating Iron sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Treating Iron Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Treating Iron, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Treating Iron Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Treating Iron Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Treating Iron.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Treating Iron depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Treating Iron Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Treating Iron bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Treating Iron. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Treating Iron, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Treating Iron, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Treating Iron?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Treating Iron tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Treating Iron?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Treating Iron, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Treating Iron is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All