Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

10Latest Touch probe Tenders List

Latest Touch probe Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Touch probe tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Touch probe tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Touch probe Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Touch probe tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Touch probe Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Touch probe Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Touch probe Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Touch probe tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Touch probe Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Touch probe sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Touch probe tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Touch probe tenders.

Is EMD mandatory for all Touch probe tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Touch probe work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Touch probe tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Touch probe Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16590801
Location : bangalore , karnataka
Source : GEM Tenders
T18 Ref No : 15734781
Location : bangalore , karnataka
Source : GEM Tenders
tender for cnc double column vertical machining center , panel cooler ac , coolant system , hydraulic system , pre- dispatch inspection -pdi , installation and commissioning , stabilizer , machine andon light , standard tools and toolbox , hand held air gun , touch probe , set of spares for machine maintatinence , right angle milling head , first fill of lubricating oils,coolant. , document and manuals , test pieces for machining trails , levelling and anchoring materials , packaging and forwarding , tool holders and collets, cnc double column vertical machining center, cnc double column vertical machining center in annexure1, panel cooler ac as per annexure1 - detailed specification - sl.no 13.9, integrated and programmable coolant system as per annexure1, hydraulic system as per annexure1 - detailed specification - sl.no 12, pre- dispatch inspection in annexure iii -detailed specification, installation and commissioning as detailed specification of annexureiii - detailed specification, automatic voltage stabilizer compatible with the double column cnc vmc as per si. no.13.32, machie andon light as per annexure1 - detailed specification - sl.no 15.8, standard tools and toolbox for machine operation and maintenance in annexure1 - detailed specification - sl.no 13.34, hand held air gun per annexure1 - detailed specification - si. no 13.30, touch probe as per annexure1 - detailed specification - si. no 11, set of spares for machine maintatinence for 2 years- itemwise breakup to be provided, right angle milling head manual adjustable as per detailed specification annexure1 - detailed specification - sl.no 13.33, first filling of lubrication,hydraulic oils and coolant as per annexure1 - detailed specification - sl.no 19, supply of documents, manuals, backups and softcopies thereof as per annexure1 - detailed specification - sl.no 17, test pieces for proveout as per 7.12 of annexure-1 and 2.1,3.11 of annexure -iii -detailed technical specifications, supply of levelling and anchoring material as per annexure1 - detailed specification - sl.no 16, packaging and forwarding as per annexure1 - detailed specification - sl.no 21, supply of tool holders and collets as per annexure -iv - detailed specification

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 15831052
Location : sas nagar , punjab
Source : GEM Tenders
tender for arduino uno development board , digital to analog converter module , arduino mega development board , case for arduino mega , programming cable for arduino mega or uno boards , tft lcd screen 3.5 inch , multiband gnss rtk module for positioning , aaa cell battries for remoteormouseorkeyboard , aa cell battries for remoteormouseorkeyboard , camera module for raspberry- piornvidia nano jetson , 24v 6.5a dc smps power supply , 1-wire temperature sensor , ec sensor , class 10 micro sd card , remote control system for droneorugv , red light incidator , 12v dc pump , sensor for obstacle detection , battery for multimeter , connector for gps module antenna , camera for fpv transmitter , fpv transmitter , fpv receiver , iot development board , embedded systems development board , wifi module , temperature sensor , opamp ic , optoisolator ic , 24 to 5v dc , thermostat switch , telemetry transmitter receiver 915mhz , telemetry transmitter receiver 433mhz , multiband gnss rtk base module , multiband receiver antenna , gopro mod , submersible water pump , absolute encoder , temperature pid controller , solenoid valve, robotic items, uno r3 ch340g atmega328p development board with micro-usb, mcp4725 i2c dac breakout development board, atmel mcu atmega2560-16u mega 2560, transparent acrylic case shell enclosure gloss box for arduino mega 2560 r3, cable for arduino uno or mega (usb a to b)-50 cm, nextion basic nx4832t035 3.5 hmi tft lcd touch display module, hex here4 multiband rtk gnss gps module, duracell chhota power alkaline aaa batteries (pack of 10), duracell chhota power alkaline aa batteries (pack of 10), intel realsense depth camera d435i with imu, lm150-20b24 mornsun smps - 24v 6.5a - 156w acordc enclosed switching single output power supply, ds18b20 water proof temperature probe, dfrobot gravity lab grade analog electrical conductivity sensor ormeter v2 (k equals 1), sandisk micro sdxc ush-i 64gb class 10 memory card, skydroid t12 2.4ghz 12ch remote controller with r12 receiver and 3in1 camera, red acordc12v 16mm ad16-16e led power pilot signal indicator lamp, dc6-12v mini aquarium water pump r385, dfrobot a02yyuw waterproof ultrasonic sensor, 9v original hw high-quality battery-10pcsorbox, 15cm ipex 1 to rp-sma female connector cable 11mm rg1.13, high definition 1200tvl cmos camera with 2.1mm lens fpv camera for rc drone multi-copter, ewrf ts5823 600mw wireless video transmitter, 5.8g uvc otg android av phone receiver, aries iot v2.0 devlopment board, aries v3.0 devlopment board, esp32-wroom-32d iot development board module for arduino, esp8266 serial port to wi-fi module, fl-m1s, b3950 10k ntc thermistor temperature sensor 5 x 25mm with xh2.54 connector with 3 meter cable, pt1000-s waterproof 1m 30mm stainless steel pole probe temperature sensor, lm358p pdip-8 high gain operational amplifier (pack of 5 ics), tlp183(gb-tple - photocoupler optoisolator infrared led and photo transistor 1 ch 6-so 4 pin, lm2596s dc-dc buck converter power supply, stc-1000 ac220v digital temperature controlled thermostat switch, holybro sik telemetry radio v3 500mw 915 mhz, holybro sik telemetry radio v3 500mw 433 mhz, here4 rtk base, u-bbox ann-mb1 antenna, gopro media mod for hero9or10or11or12or13 black, 15w 800lorh submersible water pump mini fountain pump for aquarium fish tank pond water gardens hydroponic systems with nozzle ac220- 240v,water pump, ep50s8-1024-1r-n-24 encoder, temperature pid controller, smc proportional solenoid valve pvq33-5g-23, nc, 24 v dc

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 15957929
Location : bhilwara , rajasthan
Source : GEM Tenders
tender for turnkey procurement supply installation testing and commissioning of rac trade lab tools equipment at govt iti gulabpura bhilwara hack saw metal frame fixed , snip sheet metal curved nose , stakes different types , tin smith , knife folded stainless steel , tong close mouth and pick , welding table for gasor arc , flaring tool set single type for tube , swaging tool punch type set of size for tube , pinch of tool for copper tube , piercing pliers and reversing valve with access fitting , pipe or tube bender lever type , torque wrench , megger , service oscillator , c r o single beam , c r o dual traceor double beam , electronic leak detector , multi meter analogue type , fin straightenedor fin comb , dial thermometer with armored capillary dial , compressors testers for small hermetic compressors , temperature andhumidity recorder , split phase induction motor , bldc motor with controller , idu pulse generation type motor , capacitor start induction motor , ac 3 phase motor 400or 50 hz , portable air - lpg brazing kit , frost free refrigerator , threeor four door refrigerator inverter type , bench drilling machine , grinding machine , evacuating and charging station as above but fitted with weighing scale , two stage rotary vacuum pump 3or 4 cfm , window a c , split a c , duct able split a c 1 5 ton , recovery unit with cylinders , cassette air conditioner , fan coil unit , shell and tube dx chillers small , circulating water pump small , rotary hermetic compressor , bottle cooler visible , deep freezer , display cabinet , water cooler storage type , water dispenser bubble type hot and cold , ice candy plant , air conditioning indirect system water cooled , car ac tutorial model , bus ac tutorial model , automatic ice cube machine , glass board portable , chart stand , desktop computer , lcd projector or led or lcd tv big size , laptop , storage shelf, frame material heavyduty size 300 mm, length 200mm type curved nose material forged steel cutting edge hard and tempered, type grooving stake length 15 inch material options tool steel or cast iron number of grooves 10 different sizes purpose designed for creating various grooves in sheet metal work, length 400 mm graduation marked with both millimeters and inches material tool steel, type folded knife blade type double blade for electricians blade length 150 mm blade material stainless steel features folded system with two blades, tong close mouth and pickup good quality material mild steel, the gas or arc welding table with dimensions featuring a frame made of m s angle 50x50x6 mm and a top plain sheet designed to hold fire bricks along with a positioned stand made of m s pipe is generally used for robust welding tasks the specifications typically include table frame m s angle 50x50x6 mm stan m s pipe additional features complete with clamps and fire bricks extra bricks 06 nos, material block and cone made of alloy steel and hard tempered nickel chrome plated flaring capability can flare copper tubes with the following outer diameters 1or 2 inch 7or 16 inch 1or 4 inch 3or 16 inch 3or 8 inch 5or 8 inch and 5or 16 inch, function able to swage copper tubes with the following outer diameters 1or 2 inch 7or 16 inch 1or 4 inch 3or 16 inch 3or 8 inch 5or 8 inch and 5or 16 inch, the pinch-off tool for copper tubes with a diameter of 6mm to 18mm tube size compatibility 6mm to 18mm dia material chrome-plated for corrosion resistance and durability function designed to crimp or pinch-off copper tubes effectively, the piercing pliers and reversing valve with access fitting for 6-18mm tool type piercing pliers and reversing valve fitting size 6-18mm application typically used for hvac systems refrigeration and other applications requiring precise piercing and valve operation, type tube bender lever type tube compatibility 3 mm to 16 mm material chrome plated features lever type design for easy and precise bending suitable for bending tubes made of various materials like copper brass aluminum and steel graduated markings for accurate bending up to 180 degrees durable and corrosion-resistant chrome plating set includes 5 pieces set, length 300mm type ratchet type size 12 7mm material high-quality chrome plated steel features ratchet type forward reversible and locking arrangement, voltage range test voltages up to 1000v dc insulation resistance range typically from 0 01 m ohm to 200 m ohm display analog pointer, frequency range 100 khz to 30 mhz in 9 ranges power supply 220v plus minus 10persantage 50 hz accessories test lead banana rca and operating manual, specification of c r o single beam 5 mhz bandwidth dc 20mhz channels two channels trigger system automatic and normal level adjustable sources ch i ch ii alt line external slope positiveor negative coupling ac dc gnd trigger bandwidth 40 mhz computer interface usb crt 100 mm with accessories, bandwidth dc 60 mhz channels 2 channels trigger system automatic and normal level adjustable sources ch 1 ch 2 line external slope positiveor negative coupling ac dc gnd trigger bandwidth 60 mhz computer interface usb component tester built-in single touch continuity tester with beeper accessories two 10x probes two bnc-bnc cables power cord manual and calibration certificate, specifications electronic leak detector super sensitive function enhances sensitivity beyond standard settings for detecting small leaks especially with gases like refrigerants r134a r-404a r-410a r-407c r-22 sensitivity levels 3 sensitivity levels probe intelligent tip design to minimize false alarms by sensing environmental conditions flexible probe for accessing difficult-to-reach areas display six vertical led indicators red yellow or green provide relative signal level of detected leak selected sensitivity range lowor mediumor high diagnostic information includes low battery interference wait times contaminated atmosphere unit readiness or faults refrigerants detects all refrigerants cfcs hcfcs hfcs and blends sensor life 2000 hours sensing element heated tin oxide operating temperature range 0 to 140 degree f response time less than 1 second battery life 30 hours keypad functions onor off turns the unit on or off, type large size analog multimeter with automatic circuit breaker scale single scale for both ac and dc voltage with improved scale graduation features automatic circuit breaker for protection ac and dc amps share common jacks equipped with a plus minus polarity reverse switch accessories essential accessories such as test leads probes etc instruction manual suitable battery, designed for straightening the fins of condensers and cooling coils in air conditioning and refrigeration systems type fin straightenedor fin comb usage designed for straightening the fins of condensers and cooling coils fin spacing suitable for fins with spacings of 8 9 10 12 14 and 15 fins per inch compatibility can be used on both metal and plastic fins, dial thermometer type dial thermometer with armored capillary dial temperature range minus 50 degree c to plus 50 degree c capillary tube armoured to protect the capillary from physical damage and corrosion dial material stainless steel or durable plastic mounting comes with a mounting bracket or clip features armoured capillary provides protection for the capillary tube making it more suitable for rugged environments temperature range suitable for low temperature applications such as refrigeration or environmental testing dial face clear and easy to read with a scale marked for precise readings, the compressor tester for small hermetic compressors with electrical inputor output indicating facilities are as follows purpose testing of pressure testing of efficiency testing of current and voltage components fitted in the compressor tester digital voltmeter digital ammeter digital suction gauge digital pressure gauge digital energy meter time delay relay dimmer state lp hp cutout solenoid valve ms cylinder with gauge main switch air purge valve three-point socket 15 amp 5 amp charging lines gauge manifold temperature indicator test bulb tong tester main supply lead testing leads wiring and controls fixed on a sun mica panel board mounted on an ms mild steel stand, temperature and humidity recorder with the capacity to record data for 24 hours specifications recording type digital or analog recording duration 24-hour recording capability or longer durations display lcd or led display for real-time monitoring recording medium paper chart analog or digital memory digital power supply battery-operated or mains powered with backup battery, power output 1 hp horsepower voltage 230 v single phase frequency 50 hz speed typically 1440 rpm to 1750 rpm current fulll oad current around 7 8 a starting mechanism split phase starting mechanism with a start winding and a run winding centrifugal switch to disconnect the start winding after the motor reaches a certain speed construction enclosed fan-cooled tefc or open drip-proof odp housing ball bearing or sleeve bearing mounting foot-mounted or flange-mounted protection overload protection through thermal overload relay or built-in thermal protection, motor type brushless dc bldc motor power output 15 to 30 watts voltage 315v dc speed range 3000 to 4000 rpm revolutions per minute control type electronic speed controller esc phase 3-phase cooling air-cooled or fan-cooled components 1 forwardor revers switch 2 amp meter digital type 3 rpm meter digital type 5 mcb 6 main switch supply cord with pin top all components fit on panel, motor type pulse generation type power output 15 watts voltage 230v ac frequency 50or 60 hz speed 1500 rpm efficiency high efficiency control type integrated pulse generator for precise control cooling air cooled or fan cooled mounting type flange or base-mounted, motor type capacitor start induction motor power output 1 horsepower hp voltage 230v ac frequency 50or 60 hz speed 1440 to 1500 rpm revolutions per minute phase single phase starting method capacitor start capacitor typically 60 80 micro f microfarads for starting mounting type foot mounted or flange-mounted cooling air cooled, motor type ac induction motor power output 2 horsepower hp voltage 400v ac frequency 50 hz phase 3 phase speed 1440 to 1500 rpm revolutions per minute mounting type foot mounted or flange mounted cooling air cooled with fan, cylinder capacity 5 kg lpg cylinder material high-quality steel valve standard lpg valve with safety features torches type air-lpg brazing torches material brass or stainless steel nozzles interchangeable 5 nozzles for different flame sizes ignition automatic ignition hoses length typically 5 meters material high-pressure resistant rubber connections standard lpg fittings with secure clamps stand material metal or durable plastic design stable base with a holder for the cylinder and torch accessories regulator pressure regulator for precise control safety equipment safety goggles gloves and flame arrestors, capacity 200 litres and above features handle toughened glass shelves warranty card included refrigerant r 600a energy rating three star rating additional requirements manufacturer authorization required, capacity 300 to 350 litres type inverter type refrigerant hc r-600a energy rating three star rating features threeor four doors warranty card included additional requirements manufacturer authorization required, type bench type drill machine hand feed and gear drive type motorized model v belt driven with v pulley rack and pinion for slotted swivel table and base swivel table mounted on a sturdy c i arm with locking system drilling capacity 20 mm spindle nose mt 2 spindle travel 125 mm surface 200 mm rpm 200-2500 motor 1 hp 1440 rpm 3 phase 440 vac drill chuck with arbor mt2 and key 20 mm capacity accessories pump motor 0 1 hp with coolant tank and its complete fittings suitable starters switch for motors and electrical fittings drill machine vice 100 mm jaw drill drift service tool kit allen keys and spanners as per machine safety guard of motor and pulley, type pedestal grinding machine with a standard size fabricated pedestal stand wheel double ended heavy duty wheel size 200 x 25 mm rough and smooth electric motor power 0 5 hp phase 3 phase voltage 440v speed 3000 rpm running speed winding copper wire attachments twist drill grinding attachment tool rest adjustable tool rest on both sides control switch onor off four-position rotary triple pole control switch, components rotary two-stage vacuum pump and motor features gas ballast and anti-suck back capability pulling vacuum up to 50 microns of hg connection for vacuum hold test with solenoid valve and switch manifold with gauges and valves capability pulling vacuum up to 50 microns of hg weighing scale type digital capacity 10 kg additional features supplied with 3 charging lines 1 metre each instruction manual included, two stage rotary vacuum pump evacuation capability capable of evacuating to 50 microns of hg features fitted with gas ballast anti-suck back valve motor single phase motor, type window a c 1 ton with remote trainer with fault simulation unit components 1 compressor new reciprocating sealed compressor certified by the principal manufacturer with a warranty card and serial number capacity 1 ton 2 condenser air-cooled compatible with 1 ton compressor 3 condenser cooling fan compatible capacity permanent lubricated motor 4 expansion device capillary tube with compatible capacity 5 evaporator compatible with 1 ton made of copper tube and aluminum fins fitted with a compatible capacity fan 6 lp and hp pressure cut out switch 7 pressure gauges glycerine filled suction and discharge gauge 8 safety control overload and overcurrent protection for compressor with time delay circuit 9 temperature sensor digital temperature controller 10 temperature measurement digital temperature indicator with multi-channel switch 11 ampere meter and voltmeter for measurement of voltage and current 12 energymeter for measurement of energy consumption 13 other accessories hand shut off valves filter drier thermostat pressure gauges fault simulation there should be a fault switch bank of a minimum of 7-8 standard faults by inserting these faults the effects on the system can be studied mounting all accessories will be mounted on a rigid base frame made of m s mild steel pipe and g i galvanized iron powder-coated paint additional requirement manufacturer authorization required, type 1 5 ton split ac trainer with a fault-finding simulator capacity 1 5 ton refrigerant eco-friendly varies by model compressor type reciprocating or equivalent components and features 1 compressor new reciprocating or similar compressor manufacturer certified with warranty suitable for 1 5 ton capacity 2 condenser air-cooled with compatible capacity for 1 5 ton system 3 evaporator copper tube with aluminum fins compatible capacity fan 4 expansion device capillary tube or equivalent 5 controls and instruments lp and hp pressure cut-out switches glycerine-filled pressure gauges suction and discharge digital temperature indicator with multi-channel switch ampere meter and voltmeter for electrical measurements energymeter for energy consumption measurement 6 safety features overload and overcurrent protection with time delay circuit fault switch bank with multiple fault simulations typically 7-8 faults accessories hand shut-off valves filter drier thermostat construction mounted on a sturdy base frame usually m s pipe and g i powder-coated sheet additional considerations training and educational use designed for training purposes to simulate real-world faults and system responses manufacturer authorization required, a working model of a ductable split a c 1 5 ton trainer with fault simulation and eco-friendly refrigerant includes the following capacity 1 5 tons compressor type reciprocating compressor for durability and reliability in training environments refrigerant eco-friendly refrigerant to comply with environmental regulations and promote sustainability fault simulation integrated fault simulation system with various simulated faults for training purposes examples include electrical faults capacitor failure compressor overload refrigerant flow issues sensor malfunctions etc construction robust construction suitable for educational and training environments often with clear panels to visualize internal components and processes air handling unit ahu ductable design with an ahu suitable for ducted installations ensuring efficient air distribution safety features includes safety features such as overload protection emergency shutdown and clear labeling for educational purposes environmental compliance uses eco-friendly refrigerants promoting sustainability and compliance with modern environmental standards, recovery unit with cylinders for cfc compressor type twin-cylinder oil-less air-cooled piston compressor with oil separator included recovery rates components gauges pressure and compound gauges glycerine-filled liquid indicator included dryer included cut-outs high pressure hp and low pressure lp cut-outs switches onor off switch mcb miniature circuit breaker valves inlet and outlet valves cylinders empty gas cylinders 5 kg capacity each number of cylinders three cylinders for cfc refrigerants accessories flexible gas charging lines 2 nos one meter long each instruction manual included manufacturer authorization required, recovery unit with cylinders for hfc compressor type twin-cylinder oil-less air-cooled piston compressor with oil separator included components gauges pressure and compound gauges glycerine-filled liquid indicator included dryer included cut-outs high pressure hp and low pressure lp cut-outs switches onor off switch mcb miniature circuit breaker valves inlet and outlet valves cylinders empty gas cylinders 5 kg capacity each number of cylinders three cylinders for hfc refrigerants accessories flexible gas charging lines 2 nos one meter long each instruction manual included manufacturer authorization required, recovery unit with cylinders for hcfc compressor type twin-cylinder oil-less air-cooled piston compressor with oil separator included components gauges pressure and compound gauges glycerine-filled liquid indicator included dryer included cut-outs high pressure hp and low pressure lp cut-outs switches onor off switch mcb miniature circuit breaker valves inlet and outlet valves cylinders empty gas cylinders 5 kg capacity each number of cylinders three cylinders for hcfc refrigerants accessories flexible gas charging lines 2 nos one meter long each instruction manual included manufacturer authorization required, cassette air conditioner 1 5 ton type cassette air conditioner technology digital inverter technology refrigerant eco friendly copper tubing suction line and liquid line included with insulation mounting indoor unit mounting bracket included outdoor unit mounting bracket included outdoor unit service valve fitted control remote control included warranty warranty card provided manufacturer authorization required, fan coil unit with water valves type fan coil unit fcu water valves includes both 2-way and 3-way valves cooling coil material copper tube configuration two rows air filter included for filtration grill included for air distribution blower motor type suitable single-phase blower motor mounting wall or ceiling-mounted depending on design, shell and tube dx chillers small - 5 ton type shell and tube dx chiller capacity 5 tons approximately tubing material copper number of tubes 32 to 36 outer shell heavy-duty construction length 48 inches diameter 8 inches finned tubes copper fins mounting plates included for installation, small circulating water pump power rating 1 hp type single-phase motor winding material copper certification isi marked or star rating pump type self-priming tank material stainless steel capacity 20 liters inletor outlet provision both fitted on the tank frame metal frame for supporting the pump and tank make and model required, 2-ton rotary hermetic compressor specifications type rotary hermetic compressor capacity 2 tons refrigerant echo friendly voltage 220-240v or 50hz phase single-phase electrical starting accessories includes starter capacitor relay and other necessary components for proper operation, bottle cooler visible 200 l capacity general specifications inner volume minimum 200 litres refrigerant eco-friendly refrigerant compressor reciprocating compressor certified by the principal manufacturer with warranty card evaporator forced convection type lighting internal cabinet light for visibility warranty includes warranty card manufacturer authorization required detailed components compressor type reciprocating sealed compressor certification certified by principal manufacturer with warranty card and serial number evaporator type forced convection interior and exterior inner and outer body made of durable food-grade materials for safety transparent door made of tempered glass for visibility durable construction for long-term use lighting internal led light for better visibility of contents temperature control digital thermostat for temperature control additional features lockable door for security energy-efficient operation noise reduction technology warranty includes warranty card for compressor and other critical components manufacturer authorization manufacturer authorization required, deep freezer 200 l capacity general specifications inner volume minimum 200 litres refrigerant eco friendly refrigerant temperature range up to minus 18 degree c compressor reciprocating compressor certified by the principal manufacturer with warranty card detailed components compressor type reciprocating sealed compressor certification certified by principal manufacturer with warranty card and serial number temperature control digital thermostat for precise temperature control temperature range up to minus 18 degree c cooling system efficient cooling system with rapid cooling capabilities high quality insulation to maintain consistent temperature interior and exterior inner and outer body made of food grade materials for safety durable construction for long term use warranty includes warranty card for compressor and other critical components manufacturer authorization manufacturer authorization required, display cabinet 2 ton capacity general specifications cabinet material food grade stainless steel and transparent toughened glass cabinet dimensions length 6 ft width 27 inches height 4 ft with round glass shelves 2 shelves and 1 bottom shelf made of food grade stainless steel back door sliding back door with glass components compressor type new reciprocating sealed compressor certification certified by principal manufacturer with warranty card and serial number capacity 2 ton thermostatic expansion valve suitable size for the system condenser type air cooled condenser fan heavy duty energy efficient new fan motor with copper winding and condenser housing, water cooler storage type 200 liters general specifications storage capacity 200 liters cooling capacity 150 liters per hour compressor type reciprocating compressor refrigerant charged with echo friendly refrigerant construction material structure and tank made of food-grade stainless steel insulation tank with puf insulation tank lid equipped with a lock facility, water dispenser bubble type hot and cold general specifications delivery capacity 2 5 to 3 liters per hour cabinet capacity up to 20 liters functions hot cold and normal water dispensing display led display indicator hot water dispensing equipped with a lock for safety refrigerant charged with echo friendly refrigerant construction type floor-mounted faucets 3 faucets for dispensing water bottle supply unit supplied with a 20 liter transparent food-grade bottle, ice candy plant 2 ton capacity specifications capacity 2 ton temperature range 20 c to minus 30 degree c ice candy production capacity to make 32 ice candies at a time with forma tray construction stainless steel tank on trolley puff insulated stainless steel body compressor type hermetic reciprocating compressor capacity 2 ton certification tested and certified by principal manufacturer with warranty card and serial number condenser type air-cooled capacity 2 ton features heavy duty fan copper tube and aluminum fins housing brine cooling system material stainless steel with lid and lid holding angle features window for brine filling and drainage with valve facilities thick insulation agitator motor agitator water pump food grade stainless steel tank and cooling coil made of copper tube forma tray food grade stainless steel minimum 32 candy capacity proper fixing system in brine tank expansion device arrangement thermostatic expansion valve with hand shut off valve controls and gauges hp and lp cut out switch liquid line indicator receiver with inlet and outlet valve solenoid valve solid core filter drier suction accumulator pressure gauge glycerin type compound gauge glycerin type thermostat digital type hydrometer digital type temperature meters digital led type for brine temperature discharge line temperature and suction line temperature amp meter digital type energy meter digital type voltmeter digital type mcb 2 pole as a main switch with supply cord and pin top fault detection minimum eight faults switch bank for detecting various operational faults additional features heavy duty iron frame control panel fitted on powder coated g i sheet system charged with refrigerant instruction manual with fault finding wiring diagram maintenance tips and brine condition for different temperatures, air conditioning indirect system water cooled with humidity control general specifications cooling capacity 2 tons components compressor type reciprocating sealed compressor capacity 2 tons, compressor type new wobble plate type make and model number to be provided condenser type parallel flow type suitable for cars evaporator type serpentine type components thermostatic expansion valve blower motor and grill receiver features with sight glass and other necessary accessories controls type all ideal controls and safety controls for car aor c electric motor type suitable single-phase electric motor isi marked copper winding to run the compressor make and model number to be provided dc power supply components powered condenser fan evaporator fan and magnetic clutch of the compressor fault switch bank type includes standard faults like compressor clutch fault evaporator fan fault condenser fan fault etc additional accessories components onor off switch fan speed selector switch complete wiring jack and clips digital temperature indicator included in the test chamber test chamber size 3x3x6 ft lxwxh construction made of 18mm sun mica board with a door facility size 3x6 ft in an angle iron frame with an inspection glass window 1 5x2 ft towards the aor c unit condition system in running condition with refrigerant charged, specifications automobile bus aor c compressor type new automobile bus aor c compressor make and model number to be provided condenser type parallel flow type designed for buses fans two axial dc fans cooling coil type suitable for buses components expansion valve two blower motors six small grills mounting mounted on the test chamber receiver features with sight glass and all necessary accessories control and safety controls all ideal control and safety controls electric motor type suitable new electric motor with copper winding to run the compressor make and model number to be provided dc power supply components powered condenser fan evaporator blower and magnetic clutch of the compressor additional accessories components onor off switch fan speed selector switch complete wiring and a digital temperature indicator in the test chamber fault switch bank includes six standard faults like compressor clutch fault evaporator blower fault condenser fan fault thermostat fault test chamber size 8x4x6 ft lxwxh construction blower housing made of sunmica board with door facility in an angle iron frame with inspection glass window mounting complete system fitted on a four wheeled heavy duty steel trolley condition system in running condition with refrigerant charged, automatic ice cube machine with a capacity of 50 to 55 kg per day specifications capacity 50 to 55 kg of ice cubes per day control panel digitally controlled touch screen panel storage capacity 14 kg to 27 kg of ice cubes cooling method fan-cooled water connection facility for connection with a tap or direct water line body material stainless steel for durability and easy maintenance compressor energy-efficient charged with eco-friendly refrigerant special features automatic stop and start noiseless operation compact and elegant design storage bin in built manufacturer authorization required with a guarantee card, 2 5 inch x4 inch with stand, 6 inch x3 inch providing with hanging clip top and bottom plate, parameter generic technical specification processor intel i3 4 core or higher with minimum turbo boost 2 4 ghz or higher base frequency 12 mb cache or higher with 14th or higher generation and to be certified by oem chipset compatible chipset operating system 1 pre-installed oem certified genuine microsoft windows 11 professional 64 bit or higher memory ram 8 gb or higher ddr5 4400 mhz or higher with 64 gb expandability storage 512 gb ssd graphics integrated hd graphic card or highe ports minimum 5 usb ports with at least 2 usb 3 0 or higher ports hdmi display port audio jack for headphone and microphone display minimum 21 inch or higher resolution 1600x900 or higher display antivirus minimum 3 years subscription antivirus with protection for ransomware browsing phishing along with oem undertaking to be provided model specific certification bis for monitor only keyboard and mouse usb keyboard and usb two button optical mouse same make as desktop and mouse pad network interface integrated 10or 100or 1000 gb ethernet integrated 802 11ac wi-fi and bluetooth 5 0 or higher form factor smallor slim form factor or minior micro tower accessories all necessary cables expansion slots minimum two pcie slots warranty 3 years comprehensive on site oem warranty and it should be mentioned on the oem website and it should be mentioned on the oem, parameter generic technical specification technology dlp projection method front and rear both minimum resolution xga 1024 x 768or wxga 1280 x 800 brightness minimum 3300 ansi lumens for color light and white light output both contrast ratio 15000 1 aspect ratio minimum 4 3 lamp type uhe lamp life minimum 6000 hrs normal mode and 12000 hrs in eco mode wireless connectivity bluetooth and integrated wi-fi ior o connection vga hdmi usb warranty 3 years comprehensive on site oem warranty and it should be mentioned on the oem website, processor intel i3 minimum 4 core or higher with minimum turbo boost 2 4 ghz or higher base frequency, material mild steel powder coated or paint coated product type free standing unit with glass panel
T18 Ref No : 16448737
Location : sikar , rajasthan
Source : GEM Tenders
corrigendum tender for capacity 20 to 160 mm , cylinder liner dry and wet liner press fit and slide fit , depth micrometer 0 to 25 mm , dial gauge type 1 gr a complete with clamping devices and with magnetic stand , different type of engine bearing model , different types of piston model , dividers with spring 150 mm , drift punch copper 150 mm , drill point angle gauge , drill twist 1.5 mm to 15 mm various sizes by 0.5 mm , electric soldering iron 60 watt 230 v , electric soldering iron 25 watts 230 v , electric testing screw driver , engineers stethoscope , feeler gauge 20 blades metric , file flat bastard 200 mm , file half round second cut 200 mm , file square second cut 200 mm , file square rough 300 mm , file triangular second cut 150 mm , files assorted sizes and types including safe edge file 20 nos , flat file second cut 250 mm , flat file bastard 350mm , fuel injection pump diesel in line , fuel injection pump dismantling tool kit universal vice , fuel injection pumps ve pump distributor fuel rotary pump dpc pumps along with special tools and accessories , glow plug tester , surface plate l 1600 w 1000 mm c i granite with stand and cover , grease gun , growler , hacksaw frame adjustable type 200 to 300 mm , hammer ball pein 750 gm , hammer chipping 250 gm , hammer copper 1 kg with handle , hammer mallet , hand operated crimping tool wire up to 4 mm , hand operated crimping tool wire up to 10 mm , hand shear universal 250 mm , hollow punch set of seven pieces 6 mm to 15 mm , injector cleaning unit technical , injector testing set hand tester , lifting jack screw type 3 ton capacity , lifting jack screw type 5 ton capacity , lifting jack screw type 20 ton capacity , magnifying glass 75 mm , marking out table l 90 w 60 h 90 cm , multi meter digital , oil pump gear type pump for lmv , oil pump rotor type pump for lmv , oil stone l 15 w 5 h 2.5 cm , oscilloscope 20 mhz , micrometer outside 50 to 75 mm , micrometer outside 75 to 100 mm , pipe flaring tool , piston ring compressor , pliers round nose 150 mm , portable electric drill machine , prick punch 150 mm , punch number 4 mm , rivet sets snap and dolly combined 3 mm 4 mm and 6 mm , scraper flat 250 mm , scraper half round 250 mm , scraper triangular 250 mm , scriber with scribing block universal , set of stock and dies metric , tinmans shear l 450 mm w 600 mm , sheet metal gauge , tinman s shear 300 mm , soldering copper hatchet type 500 gm , solid parallels in pairs different sizes in metric , spanner clyburn 150 mm , spanner t flocks for screwing up and up screwing inaccessible , spanner adjustable 150 mm , spark lighter , spark plug spanner l 14 mm w 18 mm size , steel rule 150 mm inch and metric , straight edge gauge 2 ft , straight edge gauge 4 ft , tachometer counting type , tandem master cylinder with booster working model , taps and dies complete sets b a , taps and dies bsw various type in inch , tap and dies set metric size 03 to 24 mm , taps and die set bsf various type in inch , taps and dies width worth fine , timing lighter new brand , torque wrenches 5 to 35 nm , torque wrenches 12 to 68 nm , torque wrenches 50 to 225 nm , tyre pressure gauge with holding nipple , universal puller , v block l 75 w 38 mm pair with clamps , valve lifter , valve spring compressor universal , vernier caliper 0 to 300 mm with least count 0 point 02 mm , water pump new brand , wire gauge metric , vices of 120 mm jaw , air conditioned crdi vehicle new brand lmv bs vi with abs and speed limiter , arbor press, mechanic diesel lab items, allen key set of 12 pieces with hex key sizes 2 to 14 mm made from forged steel alloy carbon steel, caliper inside 150mm spring made of carbon steel gauging point should be heat treated, centre punch 10mm dia x 100 mm round knurled body made of alloy steel gauging point should be heat treated, screw driver 250 x 9 mm flat tip size 8 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, properly heat treated., hammer ball pein, head weight 500 gm made from forged carbon steel, face heat treated. with wooden handle, hand file 200mm second cut, made of heat treated tool steel with wooden handle., philips screw driver 100 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip with neon tester., philips screw driver 150 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 200 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 250 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 300 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, pliers combination 200mm insulated with moulded sleeves of high voltage grade, made from drop forged alloy steel with side cutting facilities, properly heat treated., screw driver heavy duty 200mm x 9 mm flat tip size 9 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., screw driver heavy duty300mmx 9mm flat tip size 10 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., spanner d.e. 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanner ring 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanners socket with speed handle, t-bar, ratchet and universal up to 32 mm set of 28 pieces with box. made from forged carbon steel., steel rule 300 mm. metric, english both graduation made of stainless steel with conversion table engraved, as per drawing l 150 mm w 200 h 400, wire cutter & stripper 150 mm made of high carbon steel , wire stripping capacity up to 6mm, spanner adjustable 350 mm blade, made from alloy steel, workshop grade, 1 should be trigger operated blow gun with interchangeable nozzles with metal gun 2 fitted with brass air inlet ferrule 3 suitable for quick removal of chips, dust and particulate from any surface 4 operating pressure 80 to 150 psi 5 high pressure nozzle 6 safety nozzle adaptor 7 crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application 8 low pressure nozzle and supplied with manual, ammeter dc shunt type up to 300 amp the shunts are constructed from high grade managing, air ratchet with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box with manual, air impact wrench with 180 ft lb 244 nm max torque and 7100 rpm and a feather touch trigger two position forward power regulator and conveniently located forward reverse ring provide precise control with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box and manual will be provided. square drive half inch bolt size in the box 9 to 27 mm, angle plate size 200x100x200mm made from close grain c.i. workshop grade., anvil 50 kg. single horn type made from cast steel working face heat treated, face having hardie hole & punching hole, stand made from fabricated angle iron (50 x 50 x 6 mm) height 400 mm, alternator starter with minimum 2 hp ac motor digital auto electrical test bench checking for alternator and starter motor auto electrical test bench checking for alternator and starter motor mild steel frame work table top test bench 2 hp and 3 phase1440 rpm motor induction motor suitable for 50 hz 415 v ac supply with heavy duty transformer for starter testing with light run test variable frequency drive vfd overload capability 150 percentage of rated current 60 seconds built in pid simplify the establishment of a closed loop control system key lock and function selection communication port rs 485 4 point 3 inch colour hmi for indication for voltage and current 2 ch analogue input controlled via rs 485 bus utilizing modbus rtu protocol 1 channel dc current input with 75 mv input for shunt 1 channel dc voltage input 200vdc 1 construction of relay output 7a 230vac 2 leds for indicating the power status and signal trans receiving status capable to interface with pc attached with thermal printer communication interface rs485 rtu diode150 a 12 to 24 v 4 nos shunt 200a 75 mv transformer 12v 200 a 24 v 150 a 1 no transformer 0 to 240 v primary 12 to 0 to 12 v secondary 1 no mains supply 415 v ac 3 phase 50 hz ac power supply v belt heavy duty banana terminals on the front panel pulley groove for alternator checking heavy duty rugged vice for mounting alternator and starter operation manual should be provided, voltage 12v input volt 230v 50hz output volt 12 v dc capable for 5ah 35ah battery charged rotary swicth to select volt and amp ammeter display and main switch plus minus knob crocodile connector with wire 2 ft in length aligator clips high current charging upto 15 ampere circuit breaker for reverse battery auto cut off after charging, blow lamp capacity 1000ml body made from brass. with inclined burner type, should be used on vehicle belts where the manufacturer specifies the timing belt tension to be set at a specific location on the belt span between pulleys should have clear incremental markings with knurled knob for accurate measurement. should speed up timing belt installation .measurement range 0 to 80 kg 750 newton supplied in a foam inlay box, power supply electrical electrical cable m 5 mtr working pressure bar 8 to 12 kg cm2 hose length m 10 mtr suction and discharge each motor rpm 2800 rpm flow rate l h 8 to 12 lpm phase 1 phase 3 hp 230 volt suitable for cold water spray gun standard number of pistons plungers 3 pressure gauge auto stop facility for power saving suitable guns for water and foam sprey water filter pressure regulating valve for increasing and decreasing output pressure the operating unit should be mounted on a ms structure trolley type starter switch caster wheel 2 nos water pipe inlet and out let, automatic double pawl braking system capacity range 1- 3 ton fully forged hooks are fitted safety latches shield bearing zinc plated hand chain as standard standard lift 3 meter effort required to lift 3 ton load- 30 kg. with tripod stand & standard accessories., chisel flat 100mm, made of forged steel. point heat treated., circlip plier internal 150 mm drop forge alloy steel heat treatment moulded sleeve . ., circlip plier external 150 mm.drop forge alloy steel heat treatment moulded sleeve ., circlip plier internal 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., circlip plier external 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., clamps c 100mm, made of forged steel., clamps c 150mm, made of forged steel., clamps c 200mm, made of forged steel., tray cleaning 450 into 300mm -gi sheet 18 g side handle both border wires, 1 quickconnect adapter push pressure scale 0 1000 psi 0 7000 2 kpareads pressure from 0 to 1000 psi 3 2 to 9 by 16 diameter gauge 4 thumb button air release should be supplied with adapters for suzuki hyundai gm ford isuzu mercedes toyota volkswagen and peugeot compatible for dry test with adptor standard accessories all above items should be placed secured in a blow molded plastic box or metal box, connecting rod alignment fixture height of fixture 450mm connecting rod 40 to 100mm connecting rod alignment fixture checking bent twist offset precision ground surfaceshould be supplied with following accessories bent and twist indicator bending bar with alignerdial indicator and the connecting rod fixture ms iron should be fitted over a base etc with all accessory, soldering iron copper bit weight 250gm hatchet type with handle, cylinder gauge, bore dial gauge with accessories 20-160 mm least count 0.01 mm self cantering with interchangeable mounted head complete., technical specification cylinder liners of following types dry liner for engine cylinder press fit type wet liner for engine cylinder with rubber o ring slide fit liner piston with ringstandard features, micrometer depth 0 to 25mm lc 0 point 01mm carbide tipped on measuring face made from alloy steel complete in box, dial gauge indicator l.c. 0.1 mm ran- ge 10mm dial graduation 0-50-0 balance plunger type dial & holder. magnetic base with on-off switch, fine tolerance setting arm, stem dia. as per dial indicator, complete set in dial gauge., the model will made out of different type of engine bearing suitable for engine 1 shell bearing for crankshaft with main journal and big end journal 2 thrust bearing for crankshaft 3 ball bearing for crank shaft 4 bush bearing for connecting rod 5 needle bearing for connecting rod 6 bush bearing for camshaft & rocker arm 7 shell bearing for overhead cam shaft 8 needle bearing for rocker arm 9 name mention of each bearing on board, the model will be made out of different type of piston model. 01set concave head dome head flat head solid skirt recessed head light weight model for easy shifting. piston will be mounted on a wooden board name mentioned of each type the piston.and constructional diagram details printed on to a colourful panel with details of applications the item will be supplied in a dust proof box & covered by the acrylic sheet., divider spring joint 150mm, made of alloy steel., drift punch copper 150mm made by copper, drill point angle gauge made by drop forged steel., twist drill straight shank high speed steel 1.5 to 15mm by 0.5mm set 10pcs. high carbon steel &heat treated., soldering iron 60 watt, 230 v.a.c. standard length of mains lead with 3 pin top, bit made from copper., soldering iron 25 watt, 230 v,.a.c. standard length of mains lead with 3 pin top, bit made from copper., neon tester 500 volt heavy duty insulated. handle made from transparent cellulose acetate with plated metal clip. blades made from selected steel chrome & insulated., engineer s stethoscope with standard accessories, feeler gauge set of 20 blades metric, different sizes, length of blades 100 mm, made from alloy steel., file flat 200mm bastard made of heat treated tool steel with wooden handle., file half round 20cm second cut, made of heat treated tool steel with wooden handle., file square 200mm second cut, made of heat treated tool steel with wooden handle., file, square 300mm rough, made of heat treated tool steel with wooden handle., file triangular 150mm second cut, made of heat treated tool steel with wooden handle., files assorted sizes and types including safe edge file (20 nos), made high carbon/high speed steel. size (150 mm)., file flat 250mm second cut, made of heat treated tool steel with wooden handle., file flat 350mm bastard, made of heat treated tool steel with wooden handle., fuel injection pump (diesel) inline complete pump assembly suitable for 4/6 cylinders diesel engine rsv mechanical or pneumatic governor type the item will be supplied on suitable plywood and collared with attractive colour. a dust proof wooden box & covered by the acrylic sheet., fuel injection pump dismantling tool kit 1. universal vice 2. pre stroke setting attachment with gauge, 3. pump couplings, 4. control setting gauge with attachment, 5 .tappet adjusting spanner (thin),6. ring wrench,7. tappet lifter, 8. mechanical finger (gripper), 9. adapter capsule box for fip, 10. thread puller for fly weight, 11. drift for bottom plug, 12. impact screw driver, 13. flower/trox allen key set, 14. attachment for setting angle of accelerate lever, 15. coupling for fip cam, coupling wrench, 16. round nut spanner different type, 17. ve pump holding attachment, 18. inline and rotary pump holding attachments,19. drift for installing and removing oil seal, 20. holder spanner, 21. spring locking plates, 22. governor weight remover., fuel injection pump in diesel type distributor fuel rotary pump with dpc complete pump assembly compatible for 4 cylinders diesel pump operated by handle and constructional diagram details printed on to a colourful panel with details of applications will be supplied with along with all tools and special tools and accessories for dismantling and assembling fuel injection pump special tools 1 extra long socket 2 mounting stand for ve pump distributor fuel rotary pump dpc pumps 3 injection pump special socket 4. coapling for ve pump distributor fuel rotary pump dpc pumps 5 testing jig 6two pin spnner 7 huk spanner 8.pump nozzle refting tool, power input 8point 5 to 15 volt max current 80 ampere, surface plate made of closed grain seasoned cast iron/ granite 1600 mmx 1000 mm grade 1, with calibration test certificate, complete with top cover, side handle. m.s. fabricated standard height stand with leveling screws ., grease gun pressure type 500 gm. capacity hand operated, manufactured from tin plate with steel pump with fixed spot., growler general & internal set suitable to test d.c. armature and ac motor starter rating supply ac. 250volt 50hz., hacksaw frame adjustable type 200-300mm with blade & handle., hammer ball pein head weight 750gm made from forged carbon steel, face heat treated. wooden handle fitted, hammer chipping 250gm with handle, one side chisel and other side pointed end type hard and tempered, steel handle about 250 mm long., hammer copper forged head weight 1000gm with fibre glass handle,, hammer mallet head dia.100 mm. made from wood with handle., hand operated crimping tool for crimping up to 4 mm, hand operated crimping tool for crimping up to 10 mm, hand shear universal( straight snip ) 250 mm, made from drop forge steel. cutting edge hard & tempered., punch hollow, hole dia 6 to 15 mm set of 7 pieces made from alloy steel, main unit power supply ac 220v plus minus 10 percent 50hz ultrasonic cleaner power 30 to 50w ultrasonic bath inner body material stainless steel simulated rpm range 10 to 9990 rpm step 10 rpm time range 1 to 9999 pulse width 0 point 5 to 25 ms step 0 point 1ms fuel tank capacity 2 to 4 ltr no of glass tube 4 nos with marking glass tube holder and manifold moc aluminium display type led suitable for all types of petrol injectors and gdi gasoline direct injection injectors achieve automatic cleaning and testing of injectors the machine should be capable to perform flowing test uniformity/spray ability test will be able to test the uniformity of injecting amount of each injector and to monitor the spraying status of each injector with the help of backlight leakage test will be able to test the sealing and dribbling conditions of injectors under system pressure injecting flow test will be able to check the injecting amount of the injector in 15 seconds of constant injection auto test will be able to test injectors by simulating different working conditions ultrasonic cleaning will be able to perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely, for nozzle sizes presser gauge 0 to 400 kgf cm2 standard accessories steel aluminium fuel container with filter manual hand operating lever handle with grip. along with split pin three way shut off valve with valve spindle. suitable fuel pipes for all injector, lifting jack screw type 3 ton capacity for vehicle 3048 kg road open height 13 inch closed 4 inch dia of screw 1 point 25 inch with bearing type lifting jack, lifting jack screw type 5ton capacity for vehicle 5048 kg road open height 13 closed 7 inch dia of screw 1 point 50 inch with bearing type lifting jack, lifting jack screw type 20 ton capacity road open height 14 inch closed 7 dia of screw 1 point 75 inch to 2 point 0 inch square threads with bearing type, magnifying glass 75mm with handle, marking table made from seasoned close grain c.i. 90cm x 60cm x 90cm. workshop grade with test certificate. with steel handle both side, levelling screws & cover. m.s. fabricated stand in standard size, digits 3 and half digit display lcd display with large digits for easy visibility voltage range ac up to 750v ac voltage range dc up to 1000v dc ac and dc current range up to 20a resistance measurement up to 200 mohm with capacitance frequency diode transistor test audible continuity test data hold facilities, 1. gear type pump for lmv this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine, 1. rotor type pump for lmv. this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine., stone oil 15 x 5 x 2.5 cm. one side rough & one side smooth., analog oscilloscope 20 mhz two channel 4 trace monochrome display 1 general portable rugged including features of component tester and in built frequency counter 2 bandwidth dc to 20 mhz 3d b 3 of channels two channels 4 deflection coefficient in calibrated steps from 5 mv to 5 v cm 5 rise time 17 point 5 ns 6 variable hold off for stable triggering 7 input impedance 1 mohm 25 pf 8 time base coefficients 18 calibrated steps 0 point 5microsec per cm to 0 point 2 sec cm with 5 magnifier to 100ns cm 9 trigger system automatic and normal level adjustable 10 source ch i ch ii alt line external 11 slope positive negative 12 coupling ac dc gnd 13 sensitivity 5 mm 14 trigger bandwidth 40 mhz 15 horizontal deflection dc 2 point 3 mhz 3db bandwidth 16 x to y mode phase shift 3 degree up to 60 khz 17 frequency counter range 20 hz to 30 mhz in built 18 computer interface usb 19 resolution 10 hz 10 khz 20 sensitivity 0 to 5v by div 21 attenuation 1 ratio 1 and 1 ratio 20 22 max input voltage 300 v rms cat ii 23 crt 140 mm rectangular with internal graticule and p31 phosphor 0 point 8 mm green colour plexiglass 24 calibrator operator 1 khz square wave 0 point2 vpp for probe compensation 25 z modulation ttl level 26 power supply 230 v plus minus 10 percent 50 hz ac supply component tester built in single touch, micrometer outside 50 to 75 mm l c 0 point 01 mm carbide tipped on anvil and spindle measuring face with spindle lock setting spanner and test piece 50 mm made of alloy steel complete in box with master, micrometer outside 75-100 mm, least count 0.01mm, carbide tipped on anvil &spindle measuring face, with spindle lock, setting spanner & test piece 75 mm, made of alloy steel complete in box with master., flaring tool set single type for tube 4 point 7 to 16 mm o d block and cone made of alloy steel and hard tempered nickel chrome plated able to flaring 1 by 2 inch 7 by 16 inch 1 by 4 inch 3 by 16 inch 3 by 8 inch and 5 by 8 inch o d, piston ring compressor 50 to 150 mm 2 1 by 2 inch wide spring bands equally distributes tension for easy compression for use on all passenger vehicles, pliers combination 200 mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, pliers nose 150mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, drill machine portable electrical 15 mm capacity a c single phase input full load 235 watt rpm 2800 and standard length supply cable and key, prick punch 150mm knurled body made from tool steel tip ground and heat treated, punch number 4 mm made from tool steel hardened set containing set of 9 piece 0 to 9 in suitable container, rivet sets snap and dolly combined 3 mm 4 mm 6 mm hand operated mabe drop forgd steel, scraper flat 250mm made from tool steel tip hardened and ground with wooden handle, scraper half round 20mm made from tool steel tip hardened and ground with wooden handle, scraper triangular 250mm made from tool steel tip hardened and ground with wooden handle, scriber with universal scribes block and accessories, dies set of stock and dies metric dies 3 4 5 6 8 10 12 14 16 and 18 set of 10 made from alloy tool steel dies circular split pattern type with suitable die stock with suitable dies handle dies hardened and tempered complete set in box, heavy duty cast iron body blade length600mm blade material d2 table size 450 mm into 600 mm back gauge attachment table 2t slot paddle spring operated, sheet metal gauge made from alloy steel steel graduation in both system british and metric, tinmans shear 300 mm made from drop forge steel cutting edge hard and tempered, soldering copper hatchet type 500 gms, solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated size 1 by 2 inch accuracy 0 point 0002 inch material made of high quality alloy steel precision ground and hardened product includes one pair of 1 inch into 6 into 1 by 2 into one pair of 1 to 1 by 2 inch into 6 into 1 by 2 inch one pair of 1 to 1 by 4 inch into 6 into 1 by 2 inch one pair of 1 to 3 by 4 inch into 6 into 1 by 2 inch application to be used in setting up work for drilling and milling, spanner clyburn 150mm. made from forged carbon steel. phosphate finish, spanner t flex for screwing up and unscrewing in inaccessible position and size 6 8 10 12 14 set of 5 pcs, spanner or wrench adjustable 150mm. standard pattern selected, made from forged steel heat treated, spark lighter friction type suitable for gas lighting, spark plug spanner size14 into 18 mm made from forged carbon steel, steel rule 150mm metric english both graduation made of stainless steel with conversion table engraved, straight edge 600 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, straight edge 1200 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, tachometer counting type display 5 digit lcd display accuracy plus minus 0 point 05 percent plus 1 digits rpm test range 2 to 99 999 rpm count range 1 to 99 999 counter resolution 0 point 1 rpm 2 to 999 point 9 rpm 1 rpm over 1000 rpm sampling time 0 point 5 sec over 120 rpm detecting distance 50 to 500 mm, this model which will give a complete idea of tandem master cylinder in vehicle and it s function the working model of tandem master cylinder assembly consisting of following minimum parts and practically demonstrable brake disc assembly one caliper assembly brake pad tandem master cylinder with vacuum booster vacuum pump brake hoses oil reservoir with oil with brake pedal features the model will be mounted on m s stand with good quality paint applications suitable sectioned to demonstrate the internal construction diagram details printed on to a colourful panel operating manual will be provided., taps and dies set b.a. 0 to 10 circular split pattern die & hand tap set of 3 piece made from alloy tool steel with suitable die stock and tap handle. taps and dies hardened & tempered. complete set in box, taps and dies b s w 1 by 4 5 by 16 3 by 8 inch 7 by 16 1 2 5 by 8 3 4 inch 7 by 8 1 inch set of 9 made from alloy tool steel dies circular split pattern type with suitable die stock hand tap set of 3 piece and tap handle taps and dies hardened and tempered complete set in box, tap and dies set metric size 03 to 24 mm 3 4 5 6 8 10 12 14 16 20 22 24 mm set of 12 made from alloy tool steel dies hand circular split pattern type with die stocks tap set having three piece taps with suitable tap handle and according to size taps and dies hardened and tempered complete set in box, taps and die set b s f by 4 5 by 16 3 by 8 inch 7 by 16 1 by 2 9 by 16 5 by 8 3 by 4 7 by 8 1 inch set of 10 made of alloy tool steel tap set of 3 piece circular split pattern die set tap wrenches and die stocks taps and dies hardened and tempered complete set in box, taps and dies width worth fine 1 by 8 inch 3 by 16 inch 3 by 8 inch 1 by 4 inch 5 by 16 inch 7 by 16 inch 1 by 2 inch 5 by 8 inch 3 by 4 inch 1 inch set of 10 made from alloy tool steel dies circular split pattern type with die stock hand tap set of 3 pieces with suitable tap handle. tap and dies hardened and tempered complete set in box, timing lighter with neon bulb for setting of all kind of petrol engine timing illumination angle approx 15 degree strobe tube high intensity xenon tube with cable used for checking ignition timing of petrol engine easily operate on 12v ignition systems 12 volt battery operated focused lens should provide light for high visibility of timing mark suitable for petrol carstwo wheelers handle design be more comfortable and easy to operate manufactured by standard company provided with suitable woodenplastic metal box, torque wrench 5 to 35 nm force, adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 12 to 68 nm force adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 50 to 225 nm force, adjustable by turning knurled handle barrel type rod form chrome plated. brake over type, tyre pressure gauge with holding nipple for measuring 0 to 160 lb by sq inch and 0 to 12kgf by sq cm of tyre pressure, universal puller for removing pulleys bearings, v block 75 into 38 mm pair with clamps v block pair with one clamps 75 into 38 into 50 mm by 75 into 50 into 50 mm made from close grain c i workshop grade, valve lifter valve spring for lifting & realizing of spring automatic ratchet lock c type reversible jaw adaptor for multi valve engines capacity 45 to 145mm throated clearance 250mm big window jaw adaptor for easy replacement of valve collects, valve spring compressor universal suitable for various cylinder head engine models, vernier calliper 300 mm length with metric and inch scale l c 0 point 02 mm four way quadric measurement type made from stainless chrome steel micro lapped hardened and tempered in box, automotive water pump of any multi cylinder water cooled engine for dismantling and assembling colored with attractive color. good finish the model will be fitted on suitable plywood sheet and constructional diagram details printed on to a colourful panel with details of applications, wire gauge made from alloy steel, gauge size 0 to 36 swg graduation in metric, bench vices 12cm jaw body made from close grain sg iron and serrated alloy steel jaw jaw heat treated spindle handle dia grater than equal 10 mm and closed on both end unbrakable materials screw materials en 24, engine type 3 cylinder inline common rail turbo diesel iron block air conditioned type displacement 1500 cc rear wheel drive water cooled engine fuel system common rail direct injection body two box five door wagon transmission type 5 speed manual suspension front independent with coil spring rear independent with coil spring steering type power assisted steering power window all four windows reverse gear sensors. anti theft device gprs inbuilt turning diameter 11 point 6 m ground clearance 180 mm wheel base 2680 mm fuel tank 60 litre s standard accessories owner s manual bs vi with abs and speed limiter, an arbor press is a small hand-operated press. it is typically used to perform smaller jobs such as staking riveting installing configuring and removing bearings and other press fit work removable machined steel anvil provides accurate work support in for slot positions automation grade manual material iron weight 30 to 50 kg usage application industrial capacity 2 ton, exhaust gas analyzer petrol arai approved to check construction of co2 o2 and hc and nox 1 construction of carbon monoxide range 0 to 9 point 999 percent resolution 0 point 01 percent 2 co2 carbon dioxide range 0 t
T18 Ref No : 16387076
Location : imphal , manipur
Source : GEM Tenders
tender for op sadbhavana proj 106 cap b complex with vitamin c , cap itraconazole 200 mg , cap pantoprazole 40 mg plus domperidone 30 mg , cap pre probiotic multibacillary 4 or more organisms , cap vitamin e 400 mg , tab aceclofenac 100 mg plus serratiopeptidase 15 mg plus paracetamol 325 mg , tab antispasmodic containing mefenamic acid 250 mg and dicyclomine hcl 10 mg , tab albendazole 400 mg , tab amlodipine besylate 5 mg , tab amoxycillin 500 mg plus clavulanic acid 125mg , tab ascorbic acid chewable 500 mg , tab aspirin 75 mg , tab atorvastatin 10 mg , tab azithromycin 500 mg , tab betahistine dihydrochloride 8 mg , tab calcium carbonate 500 mg plus vit d3 , tab cefixime 200 mg , tab cetrizine dihydrochloride 10 mg , tab chlorzoxazone 500 mg plus diclofenac sodium 50 mg plus paracetamol 325 mg tab cipzox , tab clopidogrel 75 mg , tab cough lozenges , tab doxylamine succinate 10 mg usp plus pyridoxine hydrochloride 10 mg ip , tab fexofenadine 180 mg , tab fluconazole 150 mg , tab folic acid 5 mg , tab glimepride 1 mg , tab glucosamine sulfate 2 kcl 750 mg plus chondroitin sulfate sodium 600 mg , tab oblique cap heamatinic containing ferrous fumarate with 100 mg elemental iron folic acid 500 mcg to 1500 mcg , tab ibuprofen 400 mg plus paracetamol 325 mg , tab metformin special repair 500 mg , tab montelukast 10 mg plus levocetrizine 10 mg , tab naproxen 250 mg , tab ondansetron 8 mg , tab ofloxacin 200 mg plus ornidazole 500 mg , tab pantoprazole 40 mg , tab paracetamol 500 mg , tab paracetamol 500 mg phenylephrine hydrochloride 10 mg and chlorpheniramine maleate 2 mg , tab pheniramine maleate 25 mg , tab pregabalin 75 mg plus methylcobalamine 1500 mcg , tab sitagliptin 50 mg , tab tamsulosin point 4 mg , tab telmisartan 40 mg , tab thyroxine 50 mcg , tab trypsin plus chymotrypsin , vaginal pessary clotrimazole 100 mg , syp azithromycine 200 mg oblique 5 ml , syp albendazole 10 ml , syp amoxycillin plus potassium clavunate bott of 30 ml , syp antacid gel each 5ml containing dried aluminium hyroxide gel 170 ml , syp dextromethorphan hydrobromide 10 mg phenylephrine hydrochloride 5 mg chlorpheniramine maleate 2 mg bott of 100 ml , syp multivitamin multiminerals with lysine bott of 200 ml , syp calcium magnesium zinc and vitamin d3 bott of 200 ml , syp cetrizine 60 ml , syp ambroxol hcl 15 mg plus guaiphensin 50 mg plus terbutaline sulphate 1 point 25 mg plus menthol 2 point 5 mg bott of 60 ml , syp cough expectorant 5 ml containing diphenhydramine hcl 14 point , syp cyproheptadine plus tricholine citrate , syp disodium hydrogen , syp iron for adults with vitamins each 5ml containing ferrous fumarate 100 mg folic acid ip 3 mg and vit b12 10 mcg 200 ml , syp lactulose bottle of 100 ml , syp ofloxacine 100 mg oblique 5 ml plus metronidazole 200 mg oblique 5 ml 30 ml , syp ondansetron 2 mg oblique 5 ml in 30 ml , syp paracetamol plus ibuprofen bott of 60 ml , syp paracetamol 250 mg , syp liv 52 , drop dicyclomine plus simethicone 10 ml , mouth wash chlorhexidine bott of 100 ml , protein powder bott of 400 gm , glucose d powder pkt of 30 gm , oint diclofenac diethylamine menthyl salisylic linsed oil menthol gel tube of 30 gm , oint anti haemorhoidal , oint clindamycin phosphate 1 percent topical gel tube of 10 gm , oint luliconazole 1 percent 30 gm , oint miconazole nitrate tube of 15 gm , oint mouth ulcer gel , oint mupirocin 2 percent 5 gm , oint povidone iodine 5 percent tube of 10 gm , oint silver sulphadiazine 1 percent tube of 15 gms , oint clotrimazole tube of 15 gm , oint metronidazole , lotion sunscreen , lotion v wash bott of 100 ml , lotion calamine bott of 100 ml , lotion glycerine bott of 100 ml , lotion povidone iodine 5 percent 100 ml , shampoo ketoconazole , gargle povidone iodine bott of 100 ml , spray analgesic , eye drop carboxy methyl cellulose 1 percent bott of 10 ml , eye drop ciprofloxacin hcl point 3 percent plus dexamethasone point 1 percent bott of 5 ml , eye drop moxifloxacin point 5 percent preservative free , ear drop benzocaine plus chlorbutol plus paradichlorobenzine plus terpentine oil 15ml , mouth paint clotrimazole bott of 5 ml , pdr clotrimazole 1 percent bott of 75 gm , sachet calciferol 60000 iu , sachet isabgol oblique ispaghula husk 3 point 5 gm , sachet oral rehydration salt ors 20 point 5 gm , mdi salmeterol 25 mcg plus fluticasone 125 mcg , nasal drop sodium chloride point 65 percent 15 ml , nasal drop oxymetazoline hcl point 5 percent , disposable mask triple layer , dressing medicated adhesive 25cmx 6cm single strip pack band aid , bandage crepe 15 cm , hand sanitizer bott of 100 ml , sanitary pad , elbow support , ankle support , knee cap size medium and large , lumbo sacral belt size medium and large , steamer , nebuliser , digital bp apparatus , walking stick , wheel chair foldable , glucometer strips one touch select plus bott of 50 strips , glucometer one touch select plus , cervical collar , inj tetanus toxoid , tooth paste thermoseal , tooth paste for kids , tooth brush paediatric , dental floss thread type , dental floss handle type , disposable mouth mirror with mirror top ss , disposable probe ss , lignocaine spray, cap b complex with vitamin c, cap itraconazole 200 mg, cap pantoprazole 40 mg plus domperidone 30 mg, cap pre probiotic multibacillary 4 or more organisms, cap vitamin e 400 mg, tab aceclofenac 100 mg plus serratiopeptidase 15 mg plus paracetamol 325 mg, tab antispasmodic containing mefenamic acid 250 mg and dicyclomine hcl 10 mg, tab albendazole 400 mg, tab amlodipine besylate 5 mg, tab amoxycillin 500 mg plus clavulanic acid 125mg, tab ascorbic acid chewable 500 mg, tab aspirin 75 mg, tab atorvastatin 10 mg, tab azithromycin 500 mg, tab betahistine dihydrochloride 8 mg, tab calcium carbonate 500 mg plus vit d3, tab cefixime 200 mg, tab cetrizine dihydrochloride 10 mg, tab chlorzoxazone 500 mg plus diclofenac sodium 50 mg plus paracetamol 325 mg tab cipzox, tab clopidogrel 75 mg, tab cough lozenges, tab doxylamine succinate 10 mg usp plus pyridoxine hydrochloride 10 mg ip, tab fexofenadine 180 mg, tab fluconazole 150 mg, tab folic acid 5 mg, tab glimepride 1 mg, tab glucosamine sulfate 2 kcl 750 mg plus chondroitin sulfate sodium 600 mg, tab oblique cap heamatinic containing ferrous fumarate with 100 mg elemental iron folic acid 500 mcg to 1500 mcg, tab ibuprofen 400 mg plus paracetamol 325 mg, tab metformin special repair 500 mg, tab montelukast 10 mg plus levocetrizine 10 mg, tab naproxen 250 mg, tab ondansetron 8 mg, tab ofloxacin 200 mg plus ornidazole 500 mg, tab pantoprazole 40 mg, tab paracetamol 500 mg, tab paracetamol 500 mg phenylephrine hydrochloride 10 mg and chlorpheniramine maleate 2 mg, tab pheniramine maleate 25 mg, tab pregabalin 75 mg plus methylcobalamine 1500 mcg, tab sitagliptin 50 mg, tab tamsulosin point 4 mg, tab telmisartan 40 mg, tab thyroxine 50 mcg, tab trypsin plus chymotrypsin, vaginal pessary clotrimazole 100 mg, syp azithromycine 200 mg oblique 5 ml, syp albendazole 10 ml, syp amoxycillin plus potassium clavunate bott of 30 ml, syp antacid gel each 5ml containing dried aluminium hyroxide gel 170 ml, syp dextromethorphan hydrobromide 10 mg phenylephrine hydrochloride 5 mg chlorpheniramine maleate 2 mg bott of 100 ml, syp multivitamin multiminerals with lysine bott of 200 ml, syp calcium magnesium zinc and vitamin d3 bott of 200 ml, syp cetrizine 60 ml, syp ambroxol hcl 15 mg plus guaiphensin 50 mg plus terbutaline sulphate 1 point 25 mg plus menthol 2 point 5 mg bott of 60 ml, syp cough expectorant 5 ml containing diphenhydramine hcl 14 point 8mg ammonium chloride point 138 gm sodium citrate 57 point 3 mg chloroform 22 point 8 mg menthol 1 point 14 mg and alcohol point 2625 ml 5 percent v oblique v in flavoured syp base bott of 100 ml, syp cyproheptadine plus tricholine citrate, syp disodium hydrogen, syp iron for adults with vitamins each 5ml containing ferrous fumarate 100 mg folic acid ip 3 mg and vit b12 10 mcg 200 ml, syp lactulose bottle of 100 ml, syp ofloxacine 100 mg oblique 5 ml plus metronidazole 200 mg oblique 5 ml 30 ml, syp ondansetron 2 mg oblique 5 ml in 30 ml, syp paracetamol plus ibuprofen bott of 60 ml, syp paracetamol 250 mg, syp liv 52, drop dicyclomine plus simethicone 10 ml, mouth wash chlorhexidine bott of 100 ml, protein powder bott of 400 gm, glucose d powder pkt of 30 gm, oint diclofenac diethylamine menthyl salisylic linsed oil menthol gel tube of 30 gm, oint anti haemorhoidal, oint clindamycin phosphate 1 percent topical gel tube of 10 gm, oint luliconazole 1 percent 30 gm, oint miconazole nitrate tube of 15 gm, oint mouth ulcer gel, oint mupirocin 2 percent 5 gm, oint povidone iodine 5 percent tube of 10 gm, oint silver sulphadiazine 1 percent tube of 15 gms, oint clotrimazole tube of 15 gm, oint metronidazole, lotion sunscreen, lotion v wash bott of 100 ml, lotion calamine bott of 100 ml, lotion glycerine bott of 100 ml, lotion povidone iodine 5 percent 100 ml, shampoo ketoconazole, gargle povidone iodine bott of 100 ml, spray analgesic, eye drop carboxy methyl cellulose 1 percent bott of 10 ml, eye drop ciprofloxacin hcl point 3 percent plus dexamethasone point 1 percent bott of 5 ml, eye drop moxifloxacin point 5 percent preservative free, ear drop benzocaine plus chlorbutol plus paradichlorobenzine plus terpentine oil 15ml, mouth paint clotrimazole bott of 5 ml, pdr clotrimazole 1 percent bott of 75 gm, sachet calciferol 60000 iu, sachet isabgol oblique ispaghula husk 3 point 5 gm, sachet oral rehydration salt ors 20 point 5 gm, mdi salmeterol 25 mcg plus fluticasone 125 mcg, nasal drop sodium chloride point 65 percent 15 ml, nasal drop oxymetazoline hcl point 5 percent, disposable mask triple layer, dressing medicated adhesive 25cmx 6cm single strip pack band aid, bandage crepe 15 cm, hand sanitizer bott of 100 ml, sanitary pad, elbow support, ankle support, knee cap size medium and large, lumbo sacral belt size medium and large, steamer, nebuliser, digital bp apparatus, walking stick, wheel chair foldable, glucometer strips one touch select plus bott of 50 strips, glucometer one touch select plus, cervical collar, inj tetanus toxoid, tooth paste thermoseal, tooth paste for kids, tooth brush paediatric, dental floss thread type, dental floss handle type, disposable mouth mirror with mirror top ss, disposable probe ss, lignocaine spray for surface anaesthetic strawberry flavour

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 16975987
Source : GEM Tenders
corrigendum tender for re 07 dglp ifa sodium lactate compound , dry view fuji film for cr , dry view konica film for cr , vdrl 1 x30 test , disposable needle s 24 , disposable needle s 26 , suction catheter fr 6 , suction catheter fr 8 , suction catheter fr 10 , suction catheter fr 12 , suction catheter fr 14 , extension line 150 cm , suture silk black atromatic with , syp ibrufenplus paracetamol bott of 60 ml , paracetamol suppository 150mg , sterile urine container , disposable oxygen mask paediatric , disposable paediatric nebulizer mask , feeding tube size 6 , feeding tube size 8 , feeding tube size 10 , ryles tube size 12 , sterillium 100 ml , levosalbutamol sulphate , drop paracetamol , syp multi vitamin with zinc , enterogermina respules , betamethasone cream , dimethicone 5 w w zinc oxide 15 , tab calcitriol 0 point25 mg , inj clindamycin , mometasone nasal spray , intracath size 26 , specimen bottle for bact alert fa adult , specimen bottle for bact alert fa paediatric , multi stick 10 sg pkt of 100 urosticks siemens , endotracheal tube holder , k bind sachet , urinary catheter foley s size 10 , urinary catheter foley s size 8 , ventilator circuit paediatric , ram cannulae premie , ram cannulae infant , intercostal drainage set with trochar size 8 , intercostal drainage set with trochar size 10 , intercostal drainage set with trochar size 12 , paediatric non rebreathing mask , paediatric cpap circuit , meconium aspirator , neonatal phototherapy eye shield , neonatal iv splint , infant iv splint , paediatric vaccutainer edta , paediatric vaccutainer sterile , paediatric vaccutainer sodium citrate , ivf isolyte p , siloderm cream , syp vit e , syp vit k , disposable laryngoscope size , infant bp cuff manual , paediatric bp cuff manual , syp doxycycline , lederflex 22g 80mm , nutriline 2f with stylet , premicath , umbilical venous catheter size 3 , umbilical venous catheter size 5 , tegaderm dressing small , intraosseus needle paediatric , disposable spo2 probes nellcor , yankur suctor connector , hmf sachet , central line triple lumen size 3f , central line triple lumen size 4f , central line triple lumen size 5f , human rabies humanoglobulin , one touch glucostrips , urine collection pouch , ambu mask size 0 , ambu mask size 1 , ambu mask size 2 , ambu mask size 3 , syp nitrofurantoin , mdi salbutamol with dose counter , ambu bag adult 1475 ml , ambu bag infant 220ml , ambu bag child 635 ml , syp ranitidine , syp cotrimoxazole septran , tab pyridoxine 25 mg , hhhfnc circuit , hhhfnc nasal cannula , exchange transfusion set pediatric , hme filter , tube holder for ventilator circuit , hepatitis a vaccine , ppd for mantaux 0 point1ml 2tu , rabies monoclonal antibodies , venturi mask set , widal test kit , malaria rapid test 1x30 , distilled water pack of 5 ltrs , pci lyte elctrolyte reagent , blotting paper , wire loop nychrome , triamcinolone 40mg ml , voriconazole eye drops , tobramycin and flurometholone , hyaluronidase 1500 iu inj , hydroxy propyl methyl cellulose , moxifloxacin 0 point50 oint , needle disposable 30 g , sterile surgical drape for eye , toric marker bubble , dark goggle , guarded cataract knife system , guarded cataract knife system with slider , guarded cataract knife system with , cellulose sponge disposable pkt of 5 , disposable sterile bimanual irrigation , disposable sterile mvr 20g straight knife , ear buds , amniotic membrane sheet dry sterile , hydrodissection cannula , vitrectomy cutter infiniti anterior , sterile eye patch with adhesive disposable , multipiece hydrophobic acrylic iolwit , 10 0 polyamide monofilament nylon , 6 0 synthetic absorbable polygalactin 910 , 8 0 synthetic absorbable polygalactin 910 , 6 0 silk single arm suture with 3 8 circle , 10 0 prolene double arm suture , 6 0 nylon single arm suture with 3 8 , inj sodium hyaluronate 16 point5 mg ml , inj sodium hyaluronate 30 mg ml with sodium , inj tropicamideplus phenylephrine , netarsudil 0 point02 eye drop bottle of 3 ml , fms packs for alcon , cuvetts for pt test , stainless steel balls for pt test , typhi dot 1x50 test , petri dish for culture sensitivity , readymade leishmen stain 500 , abg cartidge epoc , tab misoprostol 200mg , tab misoprostol 50 mg , nerve block needle s 25g , nerve block needle s 50g , nerve block needle s 100g , et tube size 07 , laryngoscope with blade, sodium lactate compound, dry view fuji film for cr, dry view konica film for cr, vdrl 1 x30 test, disposable needle s 24, disposable needle s 26, suction catheter fr 6, suction catheter fr 8, suction catheter fr 10, suction catheter fr 12, suction catheter fr 14, extension line 150 cm, suture silk black atromatic with, syp ibrufenplus paracetamol bott of 60 ml, paracetamol suppository 150mg, sterile urine container, disposable oxygen mask paediatric, disposable paediatric nebulizer mask, feeding tube size 6, feeding tube size 8, feeding tube size 10, ryles tube size 12, sterillium 100 ml, levosalbutamol sulphate, drop paracetamol, syp multi vitamin with zinc, enterogermina respules, betamethasone cream, dimethicone 5 w w zinc oxide 15, tab calcitriol 0 point25 mg, inj clindamycin, mometasone nasal spray, intracath size 26, specimen bottle for bact alert fa adult, specimen bottle for bact alert fa, multi stick 10 sg pkt of 100 urosticks, endotracheal tube holder, k bind sachet, urinary catheter foley s size 10, urinary catheter foley s size 8, ventilator circuit paediatric, ram cannulae premie, ram cannulae infant, intercostal drainage set, paediatric non rebreathing mask, paediatric cpap circuit, meconium aspirator, neonatal phototherapy eye shield, neonatal iv splint, infant iv splint, paediatric vaccutainer edta, paediatric vaccutainer sterile, paediatric vaccutainer sodium citrate, ivf isolyte p, siloderm cream, syp vit e, syp vit k, disposable laryngoscope size, infant bp cuff manual, paediatric bp cuff manual, syp doxycycline, lederflex 22g 80mm, nutriline 2f with stylet, premicath, umbilical venous catheter size 3, umbilical venous catheter size 5, tegaderm dressing small, intraosseus needle paediatric, disposable spo2 probes nellcor, yankur suctor connector, hmf sachet, central line triple lumen size 3f, central line triple lumen size 4f, central line triple lumen size 5f, human rabies humanoglobulin, one touch glucostrips, urine collection pouch, ambu mask size 0, ambu mask size 1, ambu mask size 2, ambu mask size 3, syp nitrofurantoin, mdi salbutamol with dose counter, ambu bag adult 1475 ml, ambu bag infant 220ml, ambu bag child 635 ml, syp ranitidine, syp cotrimoxazole septran, tab pyridoxine 25 mg, hhhfnc circuit, hhhfnc nasal cannula, exchange transfusion set pediatric, hme filter, tube holder for ventilator circuit, hepatitis a vaccine, ppd for mantaux 0 point1ml 2tu, rabies monoclonal antibodies, venturi mask set, widal test kit, malaria rapid test 1x30, distilled water pack of 5 ltrs, pci lyte elctrolyte reagent, blotting paper, wire loop nychrome, triamcinolone 40mg ml preservative free, voriconazole eye drops, tobramycin and flurometholone, hyaluronidase 1500 iu inj, hydroxy propyl methyl cellulose, moxifloxacin 0 point50 oint, needle disposable 30 g, sterile surgical drape for eye, toric marker bubble, dark goggle, guarded cataract knife system, guarded cataract knife system with, cellulose sponge disposable pkt of 5, disposable sterile bimanual irrigation, disposable sterile mvr 20g, ear buds, amniotic membrane sheet dry sterile, hydrodissection cannula, vitrectomy cutter infiniti anterior, sterile eye patch with adhesive disposable, multipiece hydrophobic acrylic iolwit, 10 0 polyamide monofilament nylon, 6 0 synthetic absorbable polygalactin, 8 0 synthetic absorbable polygalactin 910, 6 0 silk single arm suture with 3 8 circle, 10 0 prolene double arm suture, 6 0 nylon single arm suture with 3 8, inj sodium hyaluronate 16 point5 mg ml, inj sodium hyaluronate 30 mg, inj tropicamideplus phenylephrine, netarsudil 0 point02 eye drop, fms packs for alcon laureate, cuvetts for pt test, stainless steel balls for pt test, typhi dot 1x50 test, petri dish for culture sensitivity, readymade leishmen stain 500, abg cartidge epoc, tab misoprostol 200mg, tab misoprostol 50 mg, nerve block needle s 25g, nerve block needle s 50g, nerve block needle s 100g, et tube size 07, laryngoscope with blade no 01 02 03 04

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Touch Probe. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Touch Probe sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Touch Probe Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Touch Probe, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Touch Probe Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Touch Probe Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Touch Probe.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Touch Probe depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Touch Probe Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Touch Probe bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Touch Probe. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Touch Probe, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Touch Probe, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Touch Probe?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Touch Probe tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Touch Probe?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Touch Probe, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Touch Probe is declared L1 and is generally awarded the contract