sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

520Latest Tool holders Tenders List

Latest Tool holders Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Tool holders tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Tool holders tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Tool holders Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Tool holders tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Tool holders Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Tool holders Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Tool holders Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Tool holders tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Tool holders Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Tool holders sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Tool holders tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Tool holders tenders.

Is EMD mandatory for all Tool holders tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Tool holders work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Tool holders tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Tool holders Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17497755
Location : kanpur , uttar pradesh
Source : GEM Tenders
NEW TENDER
tender for diamond tool holder 9/16" x1. carat. make- norton/wendt/solar diamond
Agency / Dept :
advanced weapons and equipment india limited AWEIL
Due Date :
Oct 19, 2026 (20 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17499435
Location : nagpur , maharashtra
Source : GEM Tenders
NEW TENDER
tender for tooling set consisting of (a) 1 n0. turning tool holder to sandvik specn. pclnl 2525-m12 l. h. or equival
Agency / Dept :
yantra india limited
Due Date :
Oct 19, 2026 (20 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17499342
Location : nagpur , maharashtra
Source : GEM Tenders
NEW TENDER
tender for tooling set consisting of (a) 1 no. turning tool holder sandv ik cat. no. pclnr 2525 m12 (b) 70 n0s. car
Agency / Dept :
yantra india limited
Due Date :
Oct 19, 2026 (20 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17496722
Location : mumbai , maharashtra
Source : GEM Tenders
NEW TENDER
corrigendum tender for cnc inserts cnmg 120404 pm 4235 , cnmg 12 04 08 pr 4335 , vbmt 160404 pm 4225 , od turning rough vbmt 160408 pr 4235 , cnc insert cnmg 12 04 08 pm 4325 , cnmg 09 03 04 pr , cnmg 09 03 08 mn , lt 16 er 15 isok ku 25t , lt 16 er 20 isok ku 25t , lt 16 er 175 isok ku 25t , r166 ol 16 mm01 150 4125 , r166 ol 16 mm01 200 , mb 07 t093 02 10l 1025 , pclnl 2525 m12 , tool holder svjbl2525m 16 , mb a16 16 07 , end mill cutter 6 mm , end mill cutter straight shank 8 mm , end mill cutter straight shank 12 mm , 15mm hss parallel shank end mill cutter , end mill cutter straight shank 16 mm , end mill cutter straight shank 18 mm , 1mm to 10mm straight shank drill bits , hss hand hacksaw blade 18 tpi , circlip plier small size outside , circlip plier small size inside , circlip plier middle size outside , circlip plier middle size inside , 10mm threading die , drill chuck automatic middle size , drill chuck keytype middle size , drill chuck keytype small size , 8 pipe wrench , drill socket taper shank , spanner set mm , spanner set inch , bondtite adhesive 270 gram pack , wd 40 420 ml pack , ptfe teflon tape 12mm x 10meter , gws professional 6 125 angle grinder , hexagonal nut bolt 4mm x 50mm length , hexagonal nut bolt 5mm x 50mm length , hexagonal nut bolt 6mm x 50mm length , hexagonal nut bolt 8mm x 60mm length , hexagonal nut bolt 10mm x 80mm length , hexagonal nut bolt 4mm x 30mm length , hexagonal nut bolt 5mm x 30mm length , hexagonal nut bolt 6mm x 30mm length , hexagonal nut bolt 8mm x 40mm length , hexagonal nut bolt 10mm x 60mm length , allen bolt 4mm x 50mm length , allen bolt 5mm x 50mm length , allen bolt 6mm x 50mm length , allen bolt 8mm x 60mm length , allen bolt 10mm x 80mm length , allen bolt 4mm x 30mm length , allen bolt 5mm x 30mm length , allen bolt 6mm x 30mm length , allen bolt 8mm x 40mm length , allen bolt 10mm x 60mm length, procurement of spares, enclosed
Agency / Dept :
security printing and minting corporation of india ltd SPMCIL
Due Date :
Oct 05, 2026 (6 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17498492
Location : raipur , chhattisgarh
Source : GEM Tenders
NEW TENDER
tender for 20 , flat file second cut 25 cm , flat file bastard 35 cm , hammer ball peen , hammer chipping , hammer mallet , hammer plastic , hand operated crimping tool up to 4mm , hand operated crimping tool up to 10mm , hand vice up to 37 mm , hollow punch set of seven pieces 6mm to 15mm , lifting jack screw 3 ton , lifting jack screw 5ton , lifting jack screw 20 ton , magneto spanner with 8 spanners , magnifying glass 75mm , oil stone , pipe flaring tool , piston ring expander , piston ring remover , piston ring groove cleaner , pliers flat nose 15 cm , pliers round nose 15 cm , insulated side cutting pliers 150 mm , prick punch 15 cm , punch letter 4mm , punch number 4mm , right cut snips 250mm , scraper flat 25 cm , scraper half round 25 cm , scraper triangular 25 cm , spanner t flocks for screwing up and up screwing inaccessible , steel measuring tape in a case 10 meter , stud extractor set of 3 , stud remover with socket handle , temperature gauge with sensor 0 to 100 0c , thermostate , thread pitch gauge metric , tyre pressure gauge with holding nipple , universal puller for removing pulleysbearings , valve lifter , spirit level metal type 2 to 300 mm basic length accuracy , vernier bevel protractor blade with acute angle attachment 300 mm , screw pitch gauge metric , universal scribing block , punch letter set 3 mm , punch number set 3 mm , file knife edge smooth 150 mm , file feather edge smooth 150 mm , feeler gaugegauge feeler , file swiss type needle set of 12 , file card brass or steel wire , pliers combination insulated 150 mm , wooden handle forged soldering iron , spanner double ended , glass magnifying 75 mm , clamp toolmaker 5 cm set of 2 , clamp toolmaker 7 point 5 cm set of 2 , machine reamer parallel helical flute12 to 16mm set of 5 , scraper flat 150 mm , scraper triangular 150 mm , scraper half round 150 mm , chisel cold crosscut and diamond point 9 mm x 150 mm , chisel cold flat9 mm x 100 mm , chisel cold round nose 9 mm x 100 mm , drill chuck with key 12 mm , pipe wrench 400 mm , wheel dresser one for 4 units star dresser with holder length 150 mm , sleeve drill morse set of no , wing compass 254 mm or 300 mm , hand hammer with handle 1000 gm , knurling tool diamond 6mm , knurling tool straight 6mm , knurling tool diagonal 6mm , temperature gauge range 0 to 150 degree c , drill gauges letter drill gauge a to z , drill gauges number drill gauge 1 to 60 , drill gauges metric drill gauge 1 point 5mm , hollow punch straight shank hollow punch sets 5 to 12mm , bearing extractor universal gear puller 2 or 3 jaws adjustable , pulley extractor universal gear puller 2 or 3 jaws adjustable , prick punch100 mm , mallet dia 100 mm x 150 mm , aviation snips straight cut 300 mm , flat headed hammers with handle 750 gm , planishing hammer 250gm , snip bent left cut 250 mm , sine bar 125 mm , digital vernier caliper 0 to 150 mm with least count , engineers try square knife edge150 mm blade , lathe tools hss tipped set , lathe tools bit 6 mm x 75 mm hss carbide , lathe tools bit 8 mm x 75 mm hss carbide , lathe tools bit 10 mm x 75 mm hss carbide , arm strong type tool bit holder right hand , arm strong type tool bit holder left hand , arm strong type tool bit holder straight , stilson wrenches 250 mm , pipe cutter wheel type 6 mm to 25 mm , adjustable pipe chain tonge to take pipesup to 300 mm , adjustable spanner 380 mm long , welding helmet with coloured flame retardant glass , carrier for mounting components such as pb and relay boxes , screw driver 300 mm blade , screw, t and p, as per specification
Agency / Dept :
department of technical education DTE
Due Date :
Oct 28, 2026 (29 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17495436
Location : mumbai , maharashtra
Source : GEM Tenders
NEW TENDER
corrigendum tender for mb 09 r 120 06 14r 1025 , parting insert c21 g2l 0300 0503 cr1135 , lf123g10 2525 b , parting insert c21 f2l 0250 0503 cr1225 , n 123 j 1 0600 rm 2135 , mb 07 t093 02 10l 1025 , mb a16 20 09 , mb 09r080 04 14r 1025 , lf123g20 2525 b , tr v13jbl2525m , mb e12 24 07 , mb e16 34 09 , mb e16 45 09 , mb e12 32 07 , mb a16 16 07 , cxs a10 04 , cxs a10 05 , lf123 e08 2525 b , groove profile insert c21 e2n 0239 ro1225 , pdjnl 2525 m11 , mb insert mb 09 r180 09 14r 1025 , groove profile insert c21 e2n 0200 ro12 , carbide tip smk 42 e2 r 4230 , turning insert vbmt 16 04 02 mf 1125 , tool holder svhbl 2525m 16 , tool holder svvbn 2525m 11 , tool holder svvbn 2525m 16 , insert tr vb1302 f h13a , insert vnmg 16 04 04 mf 2025 , insert vnmg 16 04 08 mm 2025 , tool holder svjbr 2525m 16 , insert vbgt 16 04 02 um 1125 , a4co305l10cf02 kc 5025 , a4co405l10cf02 kc 5025 , dvvnn2525m 16 , vbmt160404hq pr 1125 , a4sml 2525 m04 17 , t c insert cnmg 120408 49 , cnc tool holder small 1616k 3 , insert mafl 3 003 1025 corocut xs, procurement of inserts and tool holders, attached
Agency / Dept :
security printing and minting corporation of india ltd SPMCIL
Due Date :
Oct 05, 2026 (6 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17497647
Location : nagpur , maharashtra
Source : GEM Tenders
NEW TENDER
tender for turning tool holder as per iso key code no. scacr 2020 e 09 note-vender must give documentry evidence , plain turning tool holder similar to m/s sandvik cat. no. r171-31-2525-12 (iso identy code pclnr 2525 , l. h. turning tool holder to iso identy code pclnl 2525 m-12. , bore turning tool holder(boring bar) to iso. identy code s16m-sclcr- 09
Agency / Dept :
yantra india limited
Due Date :
Oct 19, 2026 (20 days left)
Tender Value :
1.45L
View Documents
T18 Ref No : 17494772
Location : ahmedabad , gujarat
Source : GEM Tenders
NEW TENDER
tender for tools equipment and machinery - bearing puller set , cut out relays , brake test arrangement , bus bar with brackets 1 mtr , rcc pole , energy meter 3 ph440v , wheatstone bridge complete with galvanometer and battery , variable auto transformer , ac starter resistance type starter , star delta strater soft starter , auto transformer type starter , function generator , discrete component trainer , motor ac single phase 230 v series type , single phase capacitor motor , coil winding machine manual , shaded pole motor fractional hp, 240 v, 50 hz , wiring board on stand , anvil with stand , circlip pliers expanding and contracting 150 mm , circlip pliers expanding and contracting 200 mm , different type of engine bearing model , different type of piston model , engineers stethoscope , growler , injector multi hole type , injector pintle type , left cut snips , piston ring expander and remover. , radiator pressure cap , right cut snips , rivet sets snap and dolly combined , scraper flat , spanner t. flocks for screwing up and upscrewing inaccessible , water pump for dismantling and assembling , pneumatic rivet gun with accessories , plumb bob 115 grams , wheatstones bridge , solid state solar based single phase energy meter , rawl punch holder and bits , a. cut out relay , b. reverse current relay , c. over current relay , d. under voltage relay , knife switch tpdt fitted with fuse terminals , earth electrode primary electrode 2100x28x3.25 mm secondary cu strip 20x5mm , capacitors electrolytic , capacitors ceramic , capacitors polyster film , capacitors variable , capacitors dual run , bus bar with brackets 1 mtr each , solar street light lamp 12v 18 or 24 watts , d.c. shunt motor , dmx controller , caliper hermachrodite.spring type 150 mm , file flat 2nd cut safe edge 300 mm , lapping plate , jigs and fixture sample for demonstration , drift drill 200 mm, 100-300mm for extracting both outer and inner races with box containing, cut out relays, two spring balance of 0 to 25 kg, 1 mtr, with accessories 6 mtr, 3 ph 440 v 15 a 4 wire induction type, wheatstone bridge complete with galvanometer and battery, 0 - 270v 5a -10a single phase, for 3 phase 400 v 50 cycles 2 to 5 h p ac motors, for 3-phase, 400 v 50 cycles 2 to 5 hp ac motors, for 3-phase 400 v 50 cycles 2 to 5 hp ac motors auto transformer type starter, 2 to 200 khz, sine, square, triangular 220 v 50 hz single phase, for diode and transistor circuit with regulated power supply +5,0- 5 v,+12 ,0-12 v, 50 cycles series type with starter with switch 1 hp, single phase capacitor motor 1 hp 240v 50hz with starter switch, manual motor coil winding machine with step arbor, fractional hp 240 v 50 hz, 3 meters x 1meter with 0.5 meter projection on the top, 50 kgs, expanding and contracting 150 mm, expanding and contracting 200 mm, different type of engine bearing model, different type of piston model, engineers stethoscope, growler, injector multi hole type, injector pintle type, 250 mm, piston ring expander and remover., radiator pressure cap, 3 mm, 4 mm, 6mm, 250mm, spanner t. flocks for screwing up and upscrewing inaccessible, water pump for dismantling and assembling, pneumatic rivet gun with accessories, 115 grams, wheatstones bridge, bidirectional 5 to 30 amps 240 volts, (no. 8,10,14 &16) set, 16a, 440v, 360v- 440v, 16 amp/440 v, earth electrode primary electrode 2100x28x3.25 mm, secondary cu strip 20x5mm, capacitors electrolytic, capacitors ceramic, capacitors polyster film, capacitors variable, capacitors dual run, different type 1 mtr each, 12v 75ah battery 75 wp solar panel, 3 h.p 250 v with 3 point starter and speed regulator (laboratory type), dmx controller, 150 mm, 300 mm, 6 inch dia, jigs and fixture sample for demonstration, 200 mm hardened and black finish
Agency / Dept :
department of employment and training DET
Due Date :
Oct 10, 2026 (11 days left)
Tender Value :
4L
View Documents
T18 Ref No : 17498354
Location : chennai , tamil nadu
Source : GEM Tenders
NEW TENDER
tender for borosil glass bottles 250ml with caps , petriplates , conical flask 50ml , flat bottom flask 6000ml , 10 litre bottles solution plain tooled neck for chromic acid preparation , 10 litre glass bottle reagent with screw cap clear graduated for final bulk preparation , conical flask with screw cap , conical flask with screw cap , pipette holder , flat bottom flask 4000ml , 3 litre flask flat bottom with screw caps , tuberculin flask with gl45 screw caps , haffkine flask with short neck with rim , test tubes with screw caps , glass inner , glass connector rod , micro slides , pipettes 10ml graduated with individual calibration certificates , test tube narrow 50ml, glasswares, borosilicate glass o d x height seventy by 138 mm thread specification gl 45, borosilicate glass line petric dishes size 90 by 15 mm lid o d x height 86 by 12 mm bottom o d x height 84 by 15 mm, borosilicate glass narrow mouth with rim o d x height 51 by 90 mm neck o d 22 mm, borosilicate glass narrow mouth o d x height 236 by 315 mm neck o d 65 mm, borosilicate glass capacity 10 litres neck id 54 mm o d x h 235 mm by 430 mm, borosilicate glass capacity 10 litres gl 45 screw cap o d x h 235 mm by 405 mm, borosilicate glass capacity 3 litre gl 45 screw cap with graduation, borosilicate glass capacity 2 litre gl 45 screw cap with graduation, borosilicate glass capacity 250 ml gl 45 screw cap with graduation, borosilicate glass size length 460 mm wall thickness appr 4 mm, borosilicate glass o d x height 186 by 300 mm neck o d 65 mm, borosilicate glass gl 45 screw caps capacity 3 liters, borosilicate glass gl 45 screw caps as per sample, borosilicate glass appr neck to mouth height 70 mm with smooth surface mouth o d minus 4 point 8 mm i d minus 3 point 6 mm capacity 3000 ml, borosilicate glass size appr length 220 mm mouth od 28 mm id 26 mm gl 32 screw caps wall thickness appr 2 point 5 mm, borosilicate glass appr size length 40 mm od minus 8 mm id minus 5 mm, borosilicate glass appr size 80 mm od minus 8 mm id minus 5 mm, borosilicate glass 75 mm by 26 mm thickness 1 point 25 mm, borosilicate glass mohr type graduation level 0 point 10 ml tolerance plus 0 point 05 ml, borosilicate glass 15 mm by 150 mm
Agency / Dept :
bcg vaccine laboratory
Due Date :
Oct 20, 2026 (21 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17415356
Location : thiruvananthapuram , kerala
Source : GEM Tenders
LIVE TENDER
corrigendum tender for carbide micro turning tools & holders
Agency / Dept :
indian space research organisation ISRO
Due Date :
Sep 29, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Tool Holders. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Tool Holders sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Tool Holders Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Tool Holders, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Tool Holders Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Tool Holders Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Tool Holders.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Tool Holders depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Tool Holders Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Tool Holders bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Tool Holders. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Tool Holders, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Tool Holders, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Tool Holders?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Tool Holders tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Tool Holders?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Tool Holders, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Tool Holders is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All