sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

20Latest Roughness testing Tenders List

Latest Roughness testing Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Roughness testing tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Roughness testing tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Roughness testing Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Roughness testing tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Roughness testing Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Roughness testing Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Roughness testing Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Roughness testing tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Roughness testing Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Roughness testing sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Roughness testing tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Roughness testing tenders.

Is EMD mandatory for all Roughness testing tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Roughness testing work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Roughness testing tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Roughness testing Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17460290
Location : dasada , gujarat
Source : GEM Tenders
LIVE TENDER
tender for tools and equipment machinery item - cut section model for pneumatic components , drill gauges letter drill gauge , power tools for fastening capacity 10-18 , hand reamer set nominal dia. 6, 8, 10, 12, 16mm , surface roughness comparison plates n1 - n12 grade , anvil 50 kgs with stand , injector , ring groove cleaner , valve spring compressor universal , glow plug tester , drill point angle gauge , stethoscope engineering , arbor press hand operated 2 ton capacity , drill twist 1.5 mm to 15 mm by 0.5 mm , disk brake in working condition with caliper assembly with all parts , drum brake assembly in working condition brake drum , working model of power showing parts like door , cut section models of shock absorbers , cut section of cross ply and radial tyres , coll winding machines with counting meter , potential transformer , single phase transformer, core type, air cooled , brake test arrangement with two spring balance rating 0-25 kg , shaded pole motor fractional hp , series type portable box type ohm meter , shunt type portable box type ohm meter , ac starter starters for 3-phase , 3 phase - smart energy meter , milli voltmeter centre zero analog, portable box type housed in bakelite case , d.c. compound motor 3 h.p. 250 v, with 4 point starter and field regulator , d.c. shunt motor 3 h.p. 250 v with 3 point starter and speed regulator , solid state solar base single phase energy meter , cut out relays , reverse current relay , under voltaged relay , soft starter single phase , magnetic flux meter 0- 500 tesla , dmx controller , rawl punch holder and bits , hot wire ammeter 0-15 amps. , voltmeter m.c. multirange , voltmeter centre zero , ammeter m.c. centre zero , kilo watt meter , watt meter dynamo meter type , foot print grip 250 mm , wall jumper octagonal , earth electrode primary electrode , earth electrode secondary cu strip , dc power supply, cut section model for pneumatic components with profile plate, anodised aluminium, drill gauges letter drill gauge (a to z), number drill gauge (1 to 60), metric drill gauge (1.5mm to 12.5mm, 30 holes), power tools for fastening capacity 10-18mm, hand reamer set (taper pin straight flute) nominal dia. 6, 8, 10, 12, 16mm, surface roughness comparison plates n1 - n12 grade, anvil 50 kgs with stand, injector (two types) multi hole type, pintle type, ring groove cleaner, valve spring compressor universal, glow plug tester, drill point angle gauge, stethoscope engineering, arbor press hand operated 2 ton capacity, drill twist 1.5 mm to 15 mm (various sizes) by 0.5 mm, disk brake in working condition with caliper assembly with all parts exhibiting brake disc, caliper assembly, tandem master cylinder, brake hoses, oil bottle, pedal, etc, drum brake assembly in working condition brake drum, tandem master cylinder, oil container, brake hose, brake pedal, working model of power showing parts like door, glass with motor and its gear arrangement and operating switch. windows, cut section models of shock absorbers, cut section of cross ply and radial tyres, coll winding machines with counting meter, potential transformer 415 v, 50 hz, pt ratio, 440v/110 v,10 va, single phase transformer, core type, air cooled1 kva , 240/415 v, 50 hz, brake test arrangement with two spring balance rating 0-25 kg, shaded pole motor fractional hp , 240 v , 50 hz, series type portable box type ohm meter 50/2000 ohm analog, shunt type portable box type ohm meter 50/2000 ohm analog, ac starter starters for 3-phase, 400 v,50 cycles, 2 to 5 h.p.a.c. motors auto transformer type starter, 3 phase - smart energy meter, milli voltmeter centre zero analog, portable box type housed in bakelite case 100-0-100 mv, d.c. compound motor 3 h.p. 250 v, with 4 point starter and field regulator(laboratory type), d.c. shunt motor 3 h.p. 250 v with 3 point starter and speed regulator (laboratory type), solid state solar base single phase energy meter (bidirectional)5-30amops,240v, cut out relaysa. 16a, 440v, reverse current relay 16a, 440v, under voltaged relay 360v-440v, soft starter single phase, magnetic flux meter 0-500 tesla, dmx controller, rawl punch holder and bits (no. 8,10), hot wire ammeter 0-15 amps., voltmeter m.c. multirange 0-70,150,300 & 600v, voltmeter m.c. multirange 0-15,30,50 & 75 v, voltmeter centre zero 15-0-15 volts, ammeter m.c. centre zero 5-0-5 amp., kilo watt (kw) meter 15 a 440 v 3 phase, watt meter dynamo meter type 5 amp.and 250 v 1.25 kw, rawl punch holder and bits (no. 8,10,14,16), foot print grip 250 mm, wall jumper octagonal 37mmx450mm and 37x600 mm, earth electrode primary electrode 2100x28x3.25mm, earth electrode secondary cu strip 20x5mm, dc power supply 250 v / 25a
Agency / Dept :
department of employment and training DET
Due Date :
Oct 16, 2026 (1 day left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17632479
Location : alwar , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for steel rule , try square , caliper inside , caliper , caliper outside , divider spring , scriber , punch centre , screw driver , chisel cold flat , hammer ball , hammer ball peen , file flat 250 , file half round , hacksaw frame , safety goggles , punch dot , straight edge steel , spirit level , stud extractor , micrometer outside , vernier caliper , vernier height gauge , vernier bevel protractor , screw pitch gauge , wire gauge metric standard , universal scribing , punch letter set , punch number set , portable hand electric drill machine , drill twist straight , taps and dies , file knife edge , file feather , file triangular , file round , file square , feeler gauge , file flat , file swiss , file hand , file card , oil can , plier combination , wooden handle , spanner double ended , spanner adjustable , interchangeable , double ended , glass magnifying , clamp tool maker , c clamp , hand reamer , machine reamer , scraper flat , scraper triangular , scraper half round , chisel cold , drill chuck , pipe wrench , pipe vice , adjustable pipe , wheel dresser , vice machine , sleeve drill morse , vice bench , bench working , black board , wing compass , hammer hand , torque wrench , power tools , different profile , knurling tool , indexable boring bar , temperature gauge , dowel pin , standard tap screws , lapping plate dia 6 , medium carbon heat treated , caps screws , drill gauges , cast iron globe valve , c i sluice gate valve , stop cock , slip on forged steel , pipe threading , pulleys for v belt , v belt and flat belt , packing gasket , washer clutch keys , hollow punch , bearing different , lifting sling , bearing extractor , pulley extractor , trammel , poker , punch prick , mallet , aviation snip straight , flat headed hammer , hammer planishing , snip bent left cut , stake hatchet with leg , stake grooving , gauge slip metric , gauge snap , gauge plug , gauge telescopic , dial test indicator on stand , sine bar , dial vernier caliper universal type , screw thread micrometer , depth micrometer , digital vernier caliper , digital micrometer , comparator , engineer try square , surface roughness comparison plates , carbide wear , lathe tools h s s tipped set , lathe tools bit , arm strong type tool bit holder , stilson wrenches , pipe cutter wheel type , pipe bender spool type , adjustable pipe chain tong , s s and s c centre lathe , drilling machine , welding cable , lugs for cable , earth clamps , welding torch , gas lighter , hammer chipping , gloves leather , leather apron , spindle key , welding torches , welding goggles , welding helmet , tip cleaner , pneumatic trainer kit , hydraulic trainer kit , steel rule 150mm with metric and british graduation, try square 150 mm blade, caliper inside 150mm spring, caliper 150 mm hermaphrodite spring type, caliper outside 150 mm spring, divider spring joint 150 mm, scriber 150mm x 5mm, punch centre 120 mmx10mm, screw driver 150mm x 6mm, chisel cold flat 20mmx150mm, hammer ball peen450 gm 1lb with handle, hammer ball peen 220 gm 1 2 lb with handle, file flat 250 mm second cut, file flat 250 mm smooth, file half round 150 mm second cut, hacksaw frame fixed 300mm, safety goggles, punch dot100 mm, steel rule graduated both in metric and english unit, straight edge steel, spirit level 300 mm type, stud extractor ezy out, micrometer outside 0 to 25 mm, vernier caliper 150 mm, vernier height gauge 300 mm, vernier bevel protractor blade with acute angle attachment, screw pitch gauge, wire gauge metric standard, universal scribing block 220 mm, punch letter set, punch number set, portable hand electric drill machine 0 to 13 mm capacity, drill twist straight shank 3 to 12 mm by 0 5 mm, taps and dies complete set in a box b s w whitworth, taps and dies complete set in box set of 05, file knife edge 150 mm smooth, file feather edge 150 mm smooth, file triangular smooth 200 mm, file round 200 mm second cut, file square 250 mm second cut, feeler gauge, file triangular 200 mm second cut, file flat 300 mm second cut safe edge, file flat 200 mm bastard, file flat 300 mm bastard, file swiss type needle set of 12, file half round 250 mm second cut, file half round 250 mm bastard, file round 250 mm bastard, file hand 150 mm second cut, file card, oil can 250 ml, plier combination insulated 150 mm, wooden handle forged soldering iron copper bit, spanner double ended, spanner adjustable, interchangeable ratchet socket, double ended tubular box spannerr, glass magnifying 75 mm, clamp tool maker 50 mm, clamp tool maker 75 mm, c clamp 100 mm, c clamp 200 mm, hand reamer set taper pin straight flute, machine reamer parallel helical flute, scraper flat 150 mm, scraper triangular 150 mm, scraper half round 150 mm, chisel cold 9 mm x150 mm cross cut, chisel cold 9 mm x 150 mm diamond, chisel cold flat 9 mm x 100 mm, chisel cold 9 mm x 100 mm round nose, drill chuck 12 mm with key, pipe wrench 400 mm, pipe vice 100 mm, adjustable pipe die set b s p, wheel dresser, vice machine 100 mm jaw swivel base, vice machine 125 mm swivel base, sleeve drill morse, vice bench 150 mm jaw, bench working 2400 x 1200 x 900 mm, black board with easel, vice machine 100 mm jaw, wing compass 300 mm, hammer hand 1 kg with handle, torque wrench, power tools for fastening capacity, different profile gauges plate type for demonstration, knurling tool diamond straight and diagonal, indexable boring bar with inserts, temperature gauge range 0 150, dowel pin, standard tap screws, lapping plate dia 6, medium carbon heat treated alloy steel metric studs and bolts, caps screws, drill gauges, cast iron globe valve flanged type, c i sluice gate valve flanged type, stop cock, slip on forged steel flange, pipe threading die with handle, pulleys for v belt or flat belt, v belt and flat belt, packing gasket, washer clutch keys jib cotterand circlip, hollow punch, bearing different types, lifting sling, bearing extractor, pulley extractor, trammel, poker, punch prick, mallet, aviation snip straight, flat headed hammer with handle, hammer planishing, snip bent left cut, stake hatchet with leg, stake grooving, gauge slip metric as johnson set, gauge snap go and not go, gauge plug single ended, gauge telescopic, dial test indicator on stand, sine bar, dial vernier caliper universal type, screw thread micrometer, depth micrometer, digital vernier caliper, digital micrometer, comparator s gauge dial indication, engineer s try square knife edge, surface roughness comparison plates, vernier bevel protractor, carbide wear block 1 mm 2 mm, lathe tools h s s tipped set, lathe tools bit, arm strong type tool bit holder, stilson wrenches, pipe cutter wheel type, pipe bender spool type, adjustable pipe chain tong, spanner adjustable, s s and s c centre lathe all geared, drilling machine, welding cable, lugs for cable, earth clamps, welding torch tips of different sizes, gas lighter, hammer chipping 300 gm, gloves leather, leather apron, spindle key for cylinder valves, welding torches, welding goggles, welding helmet with colored flame retardent glass, tip cleaner, pneumatic trainer kit, hydraulic trainer kit
Agency / Dept :
department of technical education DTE
Due Date :
Oct 27, 2026 (12 days left)
Tender Value :
21.02L
View Documents
T18 Ref No : 17587394
Location : mahemdavad , gujarat
Source : GEM Tenders
LIVE TENDER
tender for mahemdavad tools equipments and machinary boq - scissors blade, ss 200mm , mallet hard wood 0.50 kg , hammer extractor type 250 grams , pliers flat nose insulated 200 mm , copper bit soldering iron. 0.25 kg , glowler 230v hz, single phase,adjustable jaws,testing armture with ampere meter and testing porbes , load bank lamp heater type 6 kw, 3ph , braketest , earth electrode , rheostat sliding type 0 to 1 ohm 10amp , lps lamp , diff cable , busbar , rcc pole with accessories , ohm meter series type portable box type 50 2000ohm analog , ohmmeter , digital multi meter , tachometer analog type - 10000 rpm , ac starters resistance type starter , ac starters star delta starter , ac table fan 68 watt, 230 v , a.c. series type motor 1 hp, 240 v, 50 hz , single phase capacitor motor , manual motor coil winding machine with step arbor , wiring board , boring bar indexable with insert 1 inch shank , lappingplate , drills guage straight shank , drills guage straight shank wire size 1 to 60 with guage , stop cock 25nb 2way, threaded end , flange slip , jigs and fixture , bearing different types , stake hatchet , stake grooving. 100 x 100 x 300 mm , surface roughness comparison plates n1-n12 grades , tip cleaner , knife electrician , hammer ball peen0.25 kg , plumb bob 115 grams , screw driver set set of 5 100 to 300 mm , file round second cut , bradawl150 mm x 6mm square pointed , set of rowel punch8, 10 mm , wooden mallet1 kg 75mm x 15mm , out side micrometer , meter reading instrument , trowel , elcb and rccb , solar street light , solar traffic light , rechargeable battery12 v, 100 ah , rechargeable battery6 v, 7 ah , solar charge controller with manual switch day lighting 6v 5 a , electric induction plate , b. electric kettle1500 watts, 240v , c. electric ironautomatic - 750 w, 240 v , d. immersion heater1500 watt, 240v , geyser storage type 10 litre , digital multiplex controller dmx , rewinding machine , demonstration table2.5 x 1.25 x 0.75 m , head phone and mic. set wired , different type bearing type of engine bearing model , different type of piston model , spanner t. flocks for screwing , spindle key , universal weld measuring gauge , hammer sledge double faced 4kg , s.s tape 5 meters flexible in case , multiangle magnetic clamp set metal base , fire buckets with stand , swaging and flooring tool kit , universal motor with starter or switch 230 v, 50 hz, 5hp, as item specification documents
Agency / Dept :
department of employment and training DET
Due Date :
Oct 16, 2026 (1 day left)
Tender Value :
3.78L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17758490
Location : bhavnagar , gujarat
Source : GEM Tenders
LIVE TENDER
tender for dial gauge type 1 gr. a complete with clamping devices and magnetic stand , drill point angle gauge , injector testing set hand tester , oil stone carborundum universel silicon carbide combination rough and fine 150 x 50 x 25 mm , universal scribing block 12 inches or 30 cm with scriber , turbocharger cut sectional view latest wgt type , vernier bevel protractor blade with acute angle attachment 300 mm , v-blocks pair with clamps 150 x 100 x 100 mm. , morse taper sleeves drill no. 0-1, 1-2, 2-3, 3-4, 4-5, , power tool for fastening capacity 10 to 18mm , defferent profile gauges plate type for demonstration metric standard , knurling tool diamond , drills guage letter sizes a to z , jigs and fixture sample for demonstration , telescopic gauge range 8-150 mm set of 6 pcs , dial test indicator on stand 0.01 mm least count , sine bar 125 mm. , surface roughness comparison plates n1-n12 grades , vernier bevel protector range 360deg, lc 5min 150mm blade , lathe tools bit 6 mm x 75 mm hss , lathe tools bit 8 mm x 75 mm hss , lathe tools bit 10 mm x 75 mm hss , arm strong type tool bit holder right hand , arm strong type tool bit holder left hand , universal weld measuring gauge , h.p. welding torch with 5 nozzles , co2 gas pressure regulator with flow meter , multiangle magnetic clamp set metal base 18x10x10cm , anvil 24 square inches working area with stand , fire buckets with stand , portable abrasive cut-off machine, boq bid of mechanical group items, dial gauge type 1 gr. a complete with clamping devices and magnetic stand, drill point angle gauge, injector testing set hand tester, oil stone carborundum universel silicon carbide combination rough and fine 150 x 50 x 25 mm, universal scribing block 12 inches or 30 cm with scriber, turbocharger cut sectional view latest wgt type, vernier bevel protractor blade with acute angle attachment 300 mm, v-blocks pair with clamps 150 x 100 x 100 mm., morse taper sleeves drill no. 0-1, 1-2, 2-3, 3-4, 4-5,, power tool for fastening capacity 10 to 18mm, defferent profile gauges plate type for demonstration metric standard, knurling tool diamond, drills guage letter sizes a to z, jigs and fixture sample for demonstration, telescopic gauge range 8-150 mm set of 6 pcs, dial test indicator on stand 0.01 mm least count, sine bar 125 mm., surface roughness comparison plates n1-n12 grades, vernier bevel protector range 360deg, lc 5min 150mm blade, lathe tools bit 6 mm x 75 mm hss, lathe tools bit 8 mm x 75 mm hss, lathe tools bit 10 mm x 75 mm hss, arm strong type tool bit holder right hand, arm strong type tool bit holder left hand, universal weld measuring gauge, h.p. welding torch with 5 nozzles, co2 gas pressure regulator with flow meter, multiangle magnetic clamp set metal base 18x10x10cm, anvil 24 square inches working area with stand, fire buckets with stand, portable abrasive cut-off machine
Agency / Dept :
department of employment and training DET
Due Date :
Oct 28, 2026 (13 days left)
Tender Value :
2.04L
View Documents
T18 Ref No : 16664094
Location : nadia , west bengal
Source : GEM Tenders
tender for workshop items vertical multistage centrifugal pump (q3) , hydraulic trainer kit each consisting of the following matching components and accessories 16 items , slip gauge , snap guage , plug guage , dial test indicator , sine bar , dial vernier caliper , screw thread micrometer , depth micrometer , digital vernier caliper , digital micrometer outside , comparators gauge dial indication , surface roughness comparision plates , vernier beveal procter , carbide wear block , stilson wrenches , pipe cutter wheel type , pipe bender machine , adjjustable pipe chain tonge , adjustavble spanner , combination set , micrometer outside , micrometer intside , vernier caliper , vernier height gauge , vernier bevel protector , file , hacksaw frame , machine vice swivel base , discrete component trainer , linear ic trainer , digital ic trainer , voltage stabilizer , dc power supply , battery charger , current transformer , potential transformer , solar panel with battery , d.c. compound generator , synchronous motor , thyristor igbt controlled dc motor drive , thyristor igbt controlled ac motor drive , electrical machine trainer , motorised bench grinder , ac series type motor , manual motor coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger home , temperature controlled soldering iron , wheat stone bridge with galvanometer and battery , single phase variable auto transformer , phase sequence indicator , growler , ohm meter , milli voltmeter , kilo wattmeter analog , digital wattmeter , a.c. energy meter , frequency meter , magnetic flux meter , lux meter , tachometer , tong tester clamp meter , air ratchet , air impact wrench , chain pulley block capacity with tripod stand , compression testing gauge , engineers stethoscope , piston ring compressor , piston ring expander and remover , hydraulic jack hi lift type , two post car lift capacity 4000 kg , wheel alignment machine computerized 3d optional , torque wrenches , diesel engine crdi 4 stroke , automotive diesel smokemeter for diesel engine , spring tension tester , trolley type portable air compressor , cut section of 4 or 6 cylinder diesel engine with moving condition to show momentum of internal parts , fuel injection test bench for calibration of fuel pump , diesel engine six cylinder in running condition , circulating water pump small , gauge manifold with gauges , dumpy level , auto level , theodolite transit , prismatic compass , dgps latest version , hand gps latest version , rachet type pipe die set , dies and die stock cup model , adjustable spanner , pipe wrench , pipe cutter , hammering hand drilling machine , electric water heater, workshop items, as per specification
Agency / Dept :
department of industrial training
Due Date :
Aug 31, 2026
Tender Value :
50.04L
View Documents
T18 Ref No : 16808587
Location : domjur , west bengal
Source : GEM Tenders
tender for supply installation and commissioning of tools and machinery for different trades vernier height gauge 300 mm , combination set 300 mm , machine vice with swiveling base 150 mm , universal machine vice swivel base 100 mm , demagnetizer chuck , surface plate cast iron 600 mm , marking table 90 cms , magnetic v block , static balancing stand , dial test indicator digital , all geared head lathe machine , pillar drill machine all geared , tool room lathe machine , all geared head lathe machine sliding surface , grinding machine pedestal 200 mm , pillar drilling machines 13mm , power saw machine 400 mm , micrometer out side 25mm , micrometer out side 50mm , micrometer out side 75mm , micrometer inside 25mm , micrometer inside 50mm , depth gauge micrometer 150 mm , vernier caliper 200mm , vernier micrometer 25mm , sliding surface and screw cutting lathe , pillar type drilling 20 mm , hydraulic trainer kit , hydraulic workstation , cut section model of hydraulic components , granite surface plate , slip gauge as johnson metric set , gauge snap go and not go , gauge plug single ended 5 to 55 , gauge telescopic set 150 mm , dial test indicator with stand , sine bar 125 mm , dial vernier caliper universal type , screw thread micrometer interchangeable , depth micrometer 25 mm , digital vernier caliper 150 mm , digital micrometer outside 25 mm , comparators gauge , engineers try square , surface roughness comparison plates , digital vernier caliper 200 mm , vernier bevel protector range 360deg , micrometer outside 25 mm , micrometer outside 50 mm , micrometer outside 75 mm , micrometer inside 150 mm , vernier caliper 150 mm , vernier height gauge 300mm , vernier bevel protector 360deg , industrial temperature gauge , lapping plate , torque wrench set , taps and dies complete set in box , taps and dies complete set , spanner double ended , spanner adjustable , interchangeable ratchet socket set , de tubular box spanner set , wheel dresser , drill chuck with key 12 mm , v block pair with clamps , angle plate , punch letter set , punch number set , portable hand drill electric , slotter , universal tool and cutter grinder machine , radial drill machine 1200 mm , silicon carbide grinding machine , grinding machine pedestal de 200 mm , high precision manual surface grinder , cylindrical grinder , power hack saw , milling cutter 10 mm , milling cutter 16 mm , milling cutter 20 mm , milling cutter 8 mm , milling cutter 45 , milling cutter 60 , milling cutter 90 , milling cutter bore dia 550 , milling cutter bore dia 600 , milling cutter bore dia 700 , milling cutter bore dia 750 , milling cutter rh 27 mm , milling cutter 450 lh 27 mm , milling cutter 600 lh 27 mm , milling cutter 600 rh 27 mm , milling cutter 50 mm , milling cutter 75 mm , milling cutter 25mm , milling cutter concave 63 mm , milling cutter convex 63 mm , involute gear cutter size 2 module , involute gear cutter size 2.5 module , involute gear cutter size 3 module , micrometer outside 100 mm , micrometer depth gauge 200 mm , vernier caliper 200 mm , direct reading vernier caliper 300 mm , digital vernier caliper 300 mm , vernier gear tooth caliper , sine bar 200 mm , universal dial test indicator with magnetic stand , gauge slip box metric 87 pieces set , magnifying glass 100 mm, as per boq
Agency / Dept :
department of industrial training
Due Date :
Sep 02, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17070470
Location : nadia , west bengal
Source : GEM Tenders
tender for vertical multistage centrifugal pump (q3) , hydraulic trainer kit each consisting of the following matching components and accessories 16 items , slip gauge , snap guage , plug guage , dial test indicator , sine bar , dial vernier caliper , screw thread micrometer , depth micrometer , digital vernier caliper , digital micrometer outside , comparators gauge dial indication , surface roughness comparision plates , vernier beveal procter , carbide wear block , stilson wrenches , pipe cutter wheel type , pipe bender machine , adjjustable pipe chain tonge , adjustavble spanner , combination set , micrometer outside , micrometer intside , vernier caliper , vernier height gauge , vernier bevel protector , file , hacksaw frame , machine vice swivel base , discrete component trainer , linear ic trainer , digital ic trainer , voltage stabilizer , dc power supply , battery charger , current transformer , potential transformer , solar panel with battery , d.c. compound generator , synchronous motor , thyristor igbt controlled dc motor drive , thyristor igbt controlled ac motor drive , electrical machine trainer , motorised bench grinder , ac series type motor , manual motor coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger home , temperature controlled soldering iron , wheat stone bridge with galvanometer and battery , single phase variable auto transformer , phase sequence indicator , growler , ohm meter , milli voltmeter , kilo wattmeter analog , digital wattmeter , a.c. energy meter , frequency meter , magnetic flux meter , lux meter , tachometer , tong tester clamp meter , air ratchet , air impact wrench , chain pulley block capacity with tripod stand , compression testing gauge , engineers stethoscope , piston ring compressor , piston ring expander and remover , hydraulic jack hi lift type , two post car lift capacity 4000 kg , wheel alignment machine computerized 3d optional , torque wrenches , diesel engine crdi 4 stroke , automotive diesel smokemeter for diesel engine , spring tension tester , trolley type portable air compressor , cut section of 4 or 6 cylinder diesel engine with moving condition to show momentum of internal parts , fuel injection test bench for calibration of fuel pump , diesel engine six cylinder in running condition , circulating water pump small , gauge manifold with gauges , dumpy level , auto level , theodolite transit , prismatic compass , dgps latest version , hand gps latest version , rachet type pipe die set , dies and die stock cup model , adjustable spanner , pipe wrench , pipe cutter , hammering hand drilling machine , electric water heater, workshop items, as per specification
Agency / Dept :
department of industrial training
Due Date :
Sep 03, 2026
Tender Value :
50.04L
View Documents
T18 Ref No : 17166087
Location : nadia , west bengal
Source : GEM Tenders
corrigendum tender for vertical multistage centrifugal pump (q3) , hydraulic trainer kit each consisting of the following matching components and accessories 16 items , slip gauge , snap guage , plug guage , dial test indicator , sine bar , dial vernier caliper , screw thread micrometer , depth micrometer , digital vernier caliper , digital micrometer outside , comparators gauge dial indication , surface roughness comparision plates , vernier beveal procter , carbide wear block , stilson wrenches , pipe cutter wheel type , pipe bender machine , adjjustable pipe chain tonge , adjustavble spanner , combination set , micrometer outside , micrometer intside , vernier caliper , vernier height gauge , vernier bevel protector , file , hacksaw frame , machine vice swivel base , discrete component trainer , linear ic trainer , digital ic trainer , voltage stabilizer , dc power supply , battery charger , current transformer , potential transformer , solar panel with battery , d.c. compound generator , synchronous motor , thyristor igbt controlled dc motor drive , thyristor igbt controlled ac motor drive , electrical machine trainer , motorised bench grinder , ac series type motor , manual motor coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger home , temperature controlled soldering iron , wheat stone bridge with galvanometer and battery , single phase variable auto transformer , phase sequence indicator , growler , ohm meter , milli voltmeter , kilo wattmeter analog , digital wattmeter , a.c. energy meter , frequency meter , magnetic flux meter , lux meter , tachometer , tong tester clamp meter , air ratchet , air impact wrench , chain pulley block capacity with tripod stand , compression testing gauge , engineers stethoscope , piston ring compressor , piston ring expander and remover , hydraulic jack hi lift type , two post car lift capacity 4000 kg , wheel alignment machine computerized 3d optional , torque wrenches , diesel engine crdi 4 stroke , automotive diesel smokemeter for diesel engine , spring tension tester , trolley type portable air compressor , cut section of 4 or 6 cylinder diesel engine with moving condition to show momentum of internal parts , fuel injection test bench for calibration of fuel pump , diesel engine six cylinder in running condition , circulating water pump small , gauge manifold with gauges , dumpy level , auto level , theodolite transit , prismatic compass , dgps latest version , hand gps latest version , rachet type pipe die set , dies and die stock cup model , adjustable spanner , pipe wrench , pipe cutter , hammering hand drilling machine , electric water heater, workshop items, as per specification
Agency / Dept :
department of industrial training
Due Date :
Sep 10, 2026
Tender Value :
50.04L
View Documents
T18 Ref No : 17132717
Location : nadia , west bengal
Source : GEM Tenders
tender for vertical multistage centrifugal pump (q3) , hydraulic trainer kit each consisting of the following matching components and accessories 16 items , slip gauge , snap guage , plug guage , dial test indicator , sine bar , dial vernier caliper , screw thread micrometer , depth micrometer , digital vernier caliper , digital micrometer outside , comparators gauge dial indication , surface roughness comparision plates , vernier beveal procter , carbide wear block , stilson wrenches , pipe cutter wheel type , pipe bender machine , adjjustable pipe chain tonge , adjustavble spanner , combination set , micrometer outside , micrometer intside , vernier caliper , vernier height gauge , vernier bevel protector , file , hacksaw frame , machine vice swivel base , discrete component trainer , linear ic trainer , digital ic trainer , voltage stabilizer , dc power supply , battery charger , current transformer , potential transformer , solar panel with battery , d.c. compound generator , synchronous motor , thyristor igbt controlled dc motor drive , thyristor igbt controlled ac motor drive , electrical machine trainer , motorised bench grinder , ac series type motor , manual motor coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger home , temperature controlled soldering iron , wheat stone bridge with galvanometer and battery , single phase variable auto transformer , phase sequence indicator , growler , ohm meter , milli voltmeter , kilo wattmeter analog , digital wattmeter , a.c. energy meter , frequency meter , magnetic flux meter , lux meter , tachometer , tong tester clamp meter , air ratchet , air impact wrench , chain pulley block capacity with tripod stand , compression testing gauge , engineers stethoscope , piston ring compressor , piston ring expander and remover , hydraulic jack hi lift type , two post car lift capacity 4000 kg , wheel alignment machine computerized 3d optional , torque wrenches , diesel engine crdi 4 stroke , automotive diesel smokemeter for diesel engine , spring tension tester , trolley type portable air compressor , cut section of 4 or 6 cylinder diesel engine with moving condition to show momentum of internal parts , fuel injection test bench for calibration of fuel pump , diesel engine six cylinder in running condition , circulating water pump small , gauge manifold with gauges , dumpy level , auto level , theodolite transit , prismatic compass , dgps latest version , hand gps latest version , rachet type pipe die set , dies and die stock cup model , adjustable spanner , pipe wrench , pipe cutter , hammering hand drilling machine , electric water heater, workshop items, as per specification
Agency / Dept :
department of industrial training
Due Date :
Sep 07, 2026
Tender Value :
50.04L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17314792
Location : gandevi , gujarat
Source : GEM Tenders
tender for 4250 tools boq1 working stool wooden standard size 21x16 inch , white apron for trainee , professional hairbrushes set , op amp trainer , power electronics trainer with atleast 6 no of onboard applications , seven segment dpm trainer board dot point selection point provided with 2mm banana socket , adjustable set square , stand for hanging dresses , electrician knife double ended 6 10mm , continuity tester , anti static pads size 2 ft x 5ft x 0 point 125 inch , anti static wrist wraps length of cord 12 foot material pvc , lan cable tester cable type rj45 frequency 50 hertz voltage 9 volt , poe adapters , cylinder liner dry and wet liner, press fit and slide fit liner 2 each , temperature gauge with sensor 0 to 100 degree measurment automobile vehicle testing , finger thimble steel , thread cutter 4 inch to 5 inch , pinking scissors 8 inch , magnet permanent bar 15 cms , rubber gloves 5000 volts , file round 2nd cut 300 mm , screw driver electrician connector 100mm , dc shunt motor 3 hp 250 v , rubber mat 2 meters x 1 meter x 9 mm , electrician helmet , motion dectector , bunsen burners , h.d.p.distill water bottle 1000ml , funnels 4cm , china dish 150ml ceramic or borosilicate glass , watch glass 3 inch dia borosilicate glass , first aid box , condenser for distillation lebig type 30cm long , electrical baby boiler , vernier depth gauge 300 mm l c 0 point 02 mm , electric spark lighter , tong flat 300 mm , resistance box 0 100 omhs , resistance box 0 500 ohms , pressure sensor with transmitter and display unit , pattern punch , pattern knotcher , pattern hanging stand , knife double bladed electrician 100 mm , steel rule graduated both in metric and english unit 300 mm , scissors blade ss 200 mm , tweezers 150 mm , plane cutters 50x200 mm , file rasp half round 200 mm bastard with handle , limit switch liver operated 2a 500 v 2 contacts , laboratory type induction coil 1000w , ohm meter series type portable box type 0 to 2000 ohm analog , ammeter mc analog,portable box type housed in bakelite case 0 to 5a , ammeter mc analog,portable box type housed in bakelite case 0 to 25a , ac ammeter mi analog portable box type housed in bakelite case multi range 0 to 5a , kilo wattmeter analog 0 to 1 point 5 to 3 kw pressure coil rating 240vor440v current rating 5aor10a analog portable box type housed in bakelite case , 4 point dc starter for 2 point 5 kw dc motor , ventilation system exhaust fan type , dry sterilizer ultra violet , digital panel meters voltage and current , trainers on power suppliers half wave rectifier full wave rectifier , inclined limb manometers , simple tank type quantity meter , mercury in steel remote indicating thermometers various ranges , digital input or output cards , tds meter , geometrical shapes , mini drafter , auto clave electrically heated , heating mantles universal , ph meter digital , heating plate electric , wheatstone bridge , ameter 0 to 5 amp , voltmeter 0 to1 volt , voltmeter 0 to 4 volt , voltmeter 0 to 5 volt , voltmeter 0 to 25 volt , milivoltmeter 0 to 5 m volt , fire buckets with stand , multi angle magnetic clamp set metal base 18 x10 x 10 cm , power saw machine blade size 450 mm , burettes 25ml boroflow , funnels dia 7 point 5cms , watch glass 3 inch dia , glass test tubes 15 ml , round bottom distillation flask with side neck , connecting screw driver 10 x 100 mm , rheostat 500 ohm , resistance box 0 to 500 ohms , dc or ac ammeter 0 to 1000 ma , dc or ac ammeter 0 to 1000 micro a , rods with screw at one end for electrochemical equivalent carbon , rods with screw at one end for electrochemical equivalent copper , stands with clamps for burettes , first aid box , swagging and flaring tool kit 45 degree tubing 1 by 8 to 3 by 4 inch , cutter pipe miniature for copper tube 3 to 16 mm dia set , blower hand portable complete 1by10hp , digital thermometer graduated disc analogy type , instrumentation screw driver set 100mm , hermatic compressor 1by 8 hp to 1by2 hp for use in repair work of appliance for cfcs and hcs , extractors screw or stud sizes 1 to 8 set , universal scribing block 220or225or250 mm pillar , blocks vee 150 x 100 x 100 mm , drill twist st shank metric 3 mm to 12 mm in step of 0 point 5 mm , taps and dies complete set 5 6 8 10 and 12 mm set of 5 , file knife edge smooth 15o mm , file feather edge smooth 150 mm , file flat 2nd cut 300 mm safe edge , file swiss or needle or instrument set of 12 nos 150 mm , file hand 2nd cut 150 mm , card file or steel wire brush 3inch x 5 inch , clamp or vice tool maker 5 cm and 7 point 5cm set of 2 , c clamp 200 mm , scraper flat 12 mm x 150 mm , scraper 3 corner 15 cm , scraper half round 15 cm , chisel cold 9 mm round noze 100 mm , pipe die with die stock 3by 4 inch , fire bucket or sand bucket , wing campass 300mm , knurling tool diamond straight and diagonal , boring bar indexable with insert 1inch shank , lapping plate 6 inch dia , mallet dia 100 mm x 150 mm , hammer flat head with handle, working stool wooden standard size 21x16 inch, lab coat white apron for trainee, professional hairbrushes set, op amp trainer ic regulated dc power supplycontinuously variable dc power supply two opamp ic.transistor 5 diodes 2 zener diodes 28 resistor 8 capacitors one led one lampmains on or off switch fuse and neon indicator are provided, power electronics trainer with atleast 6 nos of onboard applications mosfet characteristics scr characteristics scr lamp flasher scr alarm circuit series inverter single phase pwm inverter, seven segment dpm trainer board dot point selection point provided with 2mm banana socket x on board multi turn preset provided for calibration setup x dimensions 280mm l x 205mm b x 85mm h x power requirement 220v ac plus or minus 10 percent 50hz standard accessories patchcords and instruction manual, adjustable set square, stand for hanging dresses, electrician knife double ended 6 10mm is 6087 1971, continuity tester power source battery powered,item dimensions l x w x h 10 x 10 x 10 centimeters, anti static pads size 2 ft x 5ft x 0 point 125 inch is 3462 1986, anti static wrist wraps length of cord 12 foot material pvc, lan cable tester cable type rj45 frequency 50 hertz voltage 9 volt is 15955 2012, poe adapters is 13252 part 1 2010, cylinder liner dry and wet liner, press fit and slide fit liner 2 each is 6750 1985, temperature gauge with sensor 0 to 100 degree measurment automobile vehicle testing is 13602 1992, finger thimble steel, thread cutter 4 inch to 5 inch, pinking scissors 8 inch, magnet permanent bar 15 cms, rubber gloves 5000 volts is 1899 1977, file round 2nd cut 300 mm is 1931 2000, screw driver electrician connector 100mm is 844 1979, dc shunt motor 3 hp 250 v is 4722 2001, rubber mat 2 meters x 1 meter x 9 mm is 5424 1969, electrician helmet is 2925 1984, motion dectector, bunsen burners, h.d.p.distill water bottle 1000ml borosilicate glass is 1388 part 1 2005, funnels 4cm borosilicate glass is 1591, china dish 150ml ceramic or borosilicate glass is 2837 part 2 1977, watch glass 3inch dia borosilicate glass is 2626 1972, first aid box is 13115 1991, condenser for distillation lebig type 30cm long, electrical baby boiler capacity of water boiler 1 point 6 liter height of water boiler 150 mm diameter of water boiler 300 mm material of outlet tap material of water boiler outer body material of water boiler inner body stainless steel 304 is 3412 1994, vernier depth gauge 300 mm l c 0 point 02 mm material ss is 16491 part 2 2016, electric spark lighter material ss body usb rechargeable is 10975 1984, tong flat 300 mm is 843 1968, resistance box 0 100 omhs is 9223 1989, resistance box 0 500 ohms is 9223 1989, pressure sensor with transmitter and display unit voltage 24 v dc operating range 1 to plus 2200 bar, output type 4 to 20 ma 0 to 10 vdc 1 to 5 vdc or 0 point 5 to 4 point 5 v dc under 5 v dc digital indicating type pressure transmitters senses the pressure in the process display the pressure value in its indicator and gives the output in current or voltage with proportion to the input pressure, pattern punch, pattern knotcher, pattern hanging stand, knife double bladed electrician 100 mm is 5060 1969, steel rule graduated both in metric and english unit 300 mm is 1481 2024, scissors blade ss 200 mm is 989 1982, tweezers 150 mm is 8283 1976, plane cutters 50x200 mm, file rasp half round 200 mm bastard with handle is 3587 1986, limit switch liver operated 2a 500 v 2 contacts, laboratory type induction coil 1000w, ohm meterseries type portable box type0 to 2000 ohm analog, ammeter mc analog,portable box type housed in bakelite case 0 to 5a is 1248 part 2 2003, ammeter mc analog,portable box type housed in bakelite case 0 to 25a is 1248 part 2 2003, ac ammeter mi analog portable box type housed in bakelite case multi range 0 to 5a is 1248 part 2 2003, kilo wattmeter analog 0 to 1 point 5 to 3 kw pressure coil rating 240vor440v current rating 5aor10a analog portable box type housed in bakelite case, 4 point dc starter for 2 point 5 kw dc motor, ventilation system exhaust fan type specification providing and supplying wall mounted exhaust fan 9 to12inch with protective grill and basic electrical connection for ventilation demonstration the system shall include air inlet opening and exhaust fan for demonstrating air flow suitable for iti or nsqf health sanitary inspector trade educational purpose, dry sterilizer ultra violet type portable uv c sterilizer dry type material abs plastic body with reflective inner surface uv wavelength 254 nm uv c uv lamps 1 to 2 nos capacity suitable for small items small instrument keys masks etc timer preset timer 5to30 minutes with auto shut off safety lid safety switch uv leakage protection power supply 220 240v ac 5v usb application surface disinfection for training or demo purpose compliance suitable for hsi or iti training use warranty 1 year is 17615 part 1 2021, digital panel meters voltage and current is 13875 part 2 1993, trainers on power suppliers half wave rectifier full wave rectifier, inclined limb manometers is 14506 1997, simple tank type quantity meter, mercury in steel remote indicating thermometers various ranges is 13211 1991, digital input or output cards, tds meter is 3025 part 16 1984, geometrical shapes, mini drafter, auto clave electrically heated capacity 55 lit material ss 304 pressure gauge temp range 121 to 125 degree cel temp accuracy plus or minus 0 point 5 percent with auto cycle controller and solenoid valve foot lifting and drum is 3829, heating mantles universal temperature range 300 degree cel to 450 degree cel good quality fiberglass insulation analog or digital temperature controller suitable for various types of flasks 1l 2l 3l 5l to 10 liters, ph meter digital with ph range of 1 to 14 resolution of 0 point 01 ph temperature range up to 0 point 0 c to 100 c digital led or lcd display power supply of 230 vac plus or minus 10 percent with auto calibration facility auto manual temp compensation facility ph electrode to study the measurement of ph is 2711 1979, heating plate electric 1000 watt is 302 part 2 sec 6 2009, wheatstone bridge, ameter 0 to 5 amp is 1248 part 2 2003, voltmeter 0 to1 volt is 1248 part 2 2003, voltmeter 0 to 4 volt is 1248 part 2 2003, voltmeter 0 to 5 volt is 1248 part 2 2003, voltmeter 0 to 25 volt is 1248 part 2 2003, milivoltmeter 0 to 5 m volt is 1248 part 2 2003, fire buckets with stand is 2546 1974, multi angle magnetic clamp set metal base 18 x10 x 10 cm, power saw machine blade size 450 mm, burettes 25ml boroflow is 1997 2008, funnels dia 7 point 5 cms is 1541 2006, watch glass 3inch dia, glass test tubes 15 ml is 2618 2006, round bottom distillation flask with side neck is 2620 1963, connecting screw driver 10 x 100 mm is 844, rheostat 500 ohm is 9051 1979, resistance box 0 to 500 ohms, dc or ac ammeter 0 to 1000 ma is 1248 part 2 2003, dc or ac ammeter 0 to 1000 micro a is 1248 part 2 2003, rods with screw at one end for electrochemical equivalent carbon, rods with screw at one end for electrochemical equivalent copper, stands with clamps for burettes, first aid box is 13115 1991, swagging and flaring tool kit 45 degree tubing 1 by 8 to 3 by 4 inch, cutter pipe miniature for copper tube 3 to 16 mm dia set, blower hand portable complete 1by10hp, digital thermometer graduated disc analogy type, instrumentation screw driver set 100mm, hermatic compressor 1by 8 hp to 1by2 hp for use in repair work of appliance for cfcs and hcs is 10617 2018, extractors screw or stud sizes 1 to 8 set, universal scribing block 220or225or250 mm pillar, blocks vee 150 x 100 x 100 mm is 2949 1992, drill twist st shank metric 3 mm to 12 mm in step of 0 point 5 mm is 5101, taps and dies complete set 5 6 8 10 and 12 mm set of 5, file knife edge smooth 15o mm is 1931 2000, file feather edge smooth 150 mm is 1931 2000, file flat 2nd cut 300 mm safe edge is 1931 2000, file swiss or needle or instrument set of 12 nos 150 mm is 1931 2000, file hand 2nd cut 150 mm is 1931 2000, card file or steel wire brush 3inch x 5 inch, clamp or vice tool maker 5 cm and 7 point 5 cm set of 2, c clamp 200 mm is 9181 1988, scraper flat 12 mm x 150 mm is 6861 1973, scraper 3 corner 15 cm is 6861 1973, scraper half round 15 cm is 6861 1973, chisel cold 9 mm round noze 100 mm is 402 1990, pipe die with die stock 3 by 4 inch, fire bucketor sand bucket is 2546 1974, wing campass 300mm is 3208 1989, knurling tool like diamond straight and diagonal, boring bar indexable with insert 1inch shank is 14864, lapping plate 6inch dia is 2285 2003, mallet dia 100 mm x 150 mm is 5675 1987, hammer flat head with handle is 841 1983, hammer planishing with handle is 841 1983, snip bent 250 mm is 6015 1989, gauge snap go and no go 25 to 50 mm by 5 mm is 3477, telescopic gauge range 8 to150 mm set of 6 pcs is 13197 1991, surface roughness comparison plates n1 to n12 grades, carbide wear block 1 mm to 2 mm is 2984 2003, dumpy level is 4590 1980
Agency / Dept :
department of employment and training DET
Due Date :
Sep 29, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Roughness Testing. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Roughness Testing sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Roughness Testing Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Roughness Testing, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Roughness Testing Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Roughness Testing Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Roughness Testing.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Roughness Testing depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Roughness Testing Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Roughness Testing bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Roughness Testing. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Roughness Testing, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Roughness Testing, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Roughness Testing?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Roughness Testing tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Roughness Testing?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Roughness Testing, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Roughness Testing is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All