sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

69Latest Rotating light Tenders List

Latest Rotating light Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Rotating light tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Rotating light tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Rotating light Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Rotating light tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Rotating light Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Rotating light Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Rotating light Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Rotating light tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Rotating light Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Rotating light sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Rotating light tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Rotating light tenders.

Is EMD mandatory for all Rotating light tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Rotating light work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Rotating light tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Rotating light Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17354456
Location : chandigarh , chandigarh
Source : GEM Tenders
NEW TENDER
tender for scalpel bp handle , towel forceps mayo , towel clip xaction , artery forceps mosquito straight , artery forceps mosquito curved , skin hook mcindoe , adson forceps serrated , adson forceps 1x2 teeth , sponge forceps foerster , dissecting forceps narrow serrated , needle holder mayohegar , ear specula hartmann , retractor mollison , sickle knife kley , sickle knife , flap knife plester , round knife , micro ear scissors , crocodile cup forceps , crocodile serrated forceps , malleus nipper housedieter , suction tube frazier lempert , elevator farabeuf , mayo scissors , retractor senn miller kilner , ball probe goldman , curette house , seeker curette macewen , speculum endaural lempert storz , tumarkin transmeatal specula , instrument rack , house elevator , forceps vein graft press king , adaptor house fisch with cutoff luer , cannula verhoeven luer , elevator freer , scissors curved , iris scissors , scissors cartilage cutting serrated , micro scissors flat grip , rae tubes of all size , forceps nasal polypus watson williams , forceps nasal turbinate luc small oval , forceps nasal turbinate luc medium oval , forceps nasal turbinate luc large oval , aspirating dissector negus freer , elevator freerlempert , gouge nasal tilley , knife nasal cartilage ballenger , suction tube with ball tip keyhole control , speculum nasal cottle , forceps septum straightening asch , forceps septum straightening walsham , heymann nasal turbinectomy scissors , forceps tilley fine , mallet , punch rongeur frontal sinus , blakesleywilde ethmoid forceps solid , blakesley ethmoid forceps thrucut , scissors nasal solid , maxillary sinus forceps , stammberger forceps , stammberger antrum punch , frontal sinus jcurette kuhnbolger , suction cannula eicken , kerrison punch rongeur , tongue depressor lack , derma stool with adjustable height , wooden lamp , dermavission h h, scalpel blade, no 7 18 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 125 cm 5 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 8 cm 325 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 3 mm 19 cm 725 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 2 mm 12 cm 475 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 8 in 10 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 4 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 15 cm 6 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, set of 3 3 mm 4 mm and 5 mm surgical grade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 4x4 prong curved sharp 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 6 mm curved 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, oval vertical 25 x 35 mm 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 45 degree 3 mm 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 45 degree 15 mm 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight 4 mm blade 8 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight approx 1 mm jaw 8 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, up approx 1 mm jaw 8 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, right curved 8 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, left curved 8 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight 35 mm jaw 8 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, upward 8 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 3 mm 19 cm 75 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, curved 8 mm 15 cm 6 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, curved 165 cm 65 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, sharp double ended 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 08 mm 45 degree 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight 3 mm 25 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, round 19 cm 75 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 14 cm 55 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, black set of 4 4 5 6 and 7 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, stainless steel for straight instruments surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 1 mm 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 55 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 75 cm assorted sizes surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 4 mm sharp with tamper surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 35 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, standard ent micro use surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 19 cm 75 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight curved variants as per marked list surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, all sizes as required preformed rae endotracheal tube medicalgrade nontoxic and kinkresistant material smooth atraumatic tip with radiopaque marking sterile singleuse and individually packed clear size depth marking adequate residual shelf life at the time of supply, serrated edges 12 cm 475 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 19 cm 75 in dia 60 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 19 cm 75 in dia 75 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 19 cm 75 in dia 90 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 21 cm 825 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, double ended 20 cm 8 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, vshaped 5 mm 17 cm 675 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight revolving 20 cm 8 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 1 mm 19 cm 75 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 2 mm 19 cm 75 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 4 mm 19 cm 75 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 35 mm 14 cm 55 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 7 mm width x 75 mm length surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 22 cm 875 in all jaws surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 23 cm 9 in universal surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, light 18 cm 7 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 55 mm 125 cm 5 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, approx 20 cm 8 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 2 mm 70 degree surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, pointed approx 19 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight 3 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight 4 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 45 degree 3 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 45 degree 4 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 90 degree 3 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight approx 11 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 45 degree approx 125 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 70 degree vertical opening surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, tubular rotatable 35 mm working length approx 11 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 55 degree curved approx 19 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 90 degree curved approx 19 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 25 mm long curved approx 15 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 3 mm long curved approx 15 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 4 mm short curved approx 15 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, curved up 3 mm approx 18 cm 7 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, set of 3 surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, heightadjustable dermatologist doctor stool stable corrosionresistant metal base frame cushioned easytoclean seat smooth 360 degree rotation pneumatic hydraulic height adjustment with secure locking suitable for routine opd use minimum 01year warranty against manufacturing defects, dermatology woods lamp type examination light longwave uva output around 365 nm suitable for fluorescence examination of skin hair lowheat illumination compact and easy to clean minimum 01 year warranty against manufacturing defects, handheld compact dermatology skin visualization device lightweight design led illumination minimum 10x magnification suitable for close examination of skin surface pigmentation complete readytouse unit with standard accessories minimum 01year warranty against manufacturing defects
Agency / Dept :
indo tibetan border police ITBP
Due Date :
Oct 09, 2026 (18 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17274627
Location : jammu , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for re 2990-016264 silencer assy , re 2640-004922 143548 air filter , als 2520-72-04683318 clutch r brg , als x- 7803800 door regulator rh , als x-7803900 door regulator lh , mg 53200m83050 brake shoe set rear , t815 443-815-432-020 circuit breaker , sx4 nk fuel pump assy , sx4 nk fuel filter , sx4 13780m55k00 air filter assy , stln s-7478300 engine speed boot pressure sensor , tata 2573-5450-9931 bty cut off switch , als 6210-72-0468905 rotating light , tmb 203-4410-0117 steering pipe , tmb 252-0913-0202 safety cartridge , storme 278909110121 assy fuel filter , storme nk.storme.001 ac condensor , storme 278909130166 hose assy air filter out let , storme 4010-004113 597463 chain sprocket kit, mt spares
Agency / Dept :
indian army
Due Date :
Sep 25, 2026 (4 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17226591
Location : korba , chhattisgarh
Source : GEM Tenders
LIVE TENDER
tender for gear motor part no.939793 or equivalent , alternator part no.52726309 or equivalent , led light kit rhs part no.52677723 or equivalent , led light kit lhs part no.52677759 or equivalent , led working light part no.52658841 or equivalent , electronic module part no.319398 or equivalent , button part no.52573422 or equivalent , electronic accelerator pedal part no.52677280 or equivalent , sensor part no.52657758 or equivalent , sensor part no.52690374 or equivalent , module part no.52687872 or equivalent , wiper blade part no.746458 or equivalent , reverser part no.794722 or equivalent , filter tank part no.52717070 or equivalent , brake valve part no.52707570 or equivalent , rotating beacon light part no.52721773 or equivalent , reversing sound alarm part no.931557 or equivalent , battery lockout part no.705222 or equivalent , pump part no.912176 or equivalent , battery part no.batm12 or equivalent , wiring harness part no.52725273 or equivalent , speed sensor part no.795174 or equivalent , sensor part no.52576053 or equivalent , valve part no.673151 or equivalent , valve part no.501919 or equivalent , valve part no.688359 or equivalent , valve part no.726168 or equivalent, procurement of spares for manitou tyre handlers, gear motor part no.939793 or equivalent, alternator part no.52726309 or equivalent, led light kit rhs part no.52677723 or equivalent, led light kit lhs part no.52677759 or equivalent, led working light part no.52658841 or equivalent, electronic module part no.319398 or equivalent, button part no.52573422 or equivalent, electronic accelerator pedal part no.52677280 or equivalent, sensor part no.52657758 or equivalent, sensor part no.52690374 or equivalent, module part no.52687872 or equivalent, wiper blade part no.746458 or equivalent, reverser part no.794722 or equivalent, filter tank part no.52717070 or equivalent, brake valve part no.52707570 or equivalent, rotating beacon light part no.52721773 or equivalent, reversing sound alarm part no.931557 or equivalent, battery lockout part no.705222 or equivalent, pump part no.912176 or equivalent, battery part no.batm12 or equivalent, wiring harness part no.52725273 or equivalent, speed sensor part no.795174 or equivalent, sensor part no.52576053 or equivalent, valve part no.673151 or equivalent, valve part no.501919 or equivalent, valve part no.688359 or equivalent, valve part no.726168 or equivalent
Agency / Dept :
south eastern coalfields limited SECL
Due Date :
Sep 24, 2026 (3 days left)
Tender Value :
54.32L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16935584
Location : ernakulam , kerala
Source : GEM Tenders
LIVE TENDER
tender for ec6948d 3658396 , ep3091b 03183000 , ep3091b 3204200 , ep3091b 50013000 , ep3091b 624301760013 , ep3091b 624301760014 , ep3091b 624301760015 , ep3091b 624301760016 , ep3091b 624301760017 , ep3091b 624301760018 , ep3091b 624301760019 , ep3091b 624301760020 , ek3070b 313069840000 , ek3070b 130rr03f8200 , ek3070b bp0051034800 , ek3070b bp0060037100 , eh8018d 2ja959037521 , ek9521d gm51739, 25kd8c001, engine coolant elc 18 lit pail, coller nut, gasket for cylinder head cover, ball bearing 6007, push buttons green, push buttons red, panel lamp bulb, control panel of 4point4 kw contactor, voltmeter, ammeter, frequency meter, hour run indicator, rotating rectifier assy, rotating rectifier assembly, aux contractor, automatic voltage regulator ievr2n, replacement lamp engine room light, engine yanmar 3tnv88 bgkm
Agency / Dept :
indian navy
Due Date :
Oct 06, 2026 (15 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17189914
Location : udham singh nagar , uttarakhand
Source : GEM Tenders
LIVE TENDER
tender for pure tone audiometer with bone conductor diagnostic , torch penlight , lea grating paddles , lea near single symbol playing cards , lea symbol test set 3 meter , hiding heidi , lea symbol low contrast 10m flipchart , receptive-expressiveemergent languagetest third edition reel-3 , lpt linguistic profile test , vineland social maturity scale , developmental screening test dst by bharat raj , stanford binet indian adaptation-kulshreshta , piagets sensori motor intelligence scale 0 to 2 years piagetian cognitive tasks , dyslexia early screening test 4 to 6 years dest and dyslexia screening test junior 6 to 11 years , jhula , slide children , pinspot and mirror ball , mirror ball motor , led mirror ball , fire ball mounted on the roof , sound activated light , led bubble tube , optic fibers , blue led lights , 150 bulb blue led light chain , rotating drum , chime frame and beater , mirror chime bout , swings , deic rubber mats tile, led light, pure tone audiometer with bone conductor diagnostic, torch penlight, lea grating paddles, lea near single symbol playing cards, lea symbol test set 3 meter, hiding heidi, lea symbol low contrast 10m flipchart, receptive-expressiveemergent languagetest third edition reel-3, lpt linguistic profile test, vineland social maturity scale, developmental screening test dst by bharat raj, stanford binet indian adaptation-kulshreshta, piagets sensori motor intelligence scale 0 to 2 years piagetian cognitive tasks, dyslexia early screening test 4 to 6 years dest and dyslexia screening test junior 6 to 11 years, jhula, slide children, pinspot and mirror ball, mirror ball motor, led mirror ball, fire ball mounted on the roof, sound activated light, led bubble tube, optic fibers, blue led lights, 150 bulb blue led light chain, rotating drum, chime frame and beater, mirror chime bout, swings, deic rubber mats tile
Agency / Dept :
department of health and family welfare DOHAFW
Due Date :
Sep 24, 2026 (3 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17207107
Location : baramulla , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for repair and pcb replacement of hand held search light , repair and mirror replacement of veh scanning mirror , pcb and bty replacement of megaphone with amplifier , repair of hand held metal detector , repair and mounting rotator replacement of veh mounting search light, original
Agency / Dept :
indian army
Due Date :
Sep 21, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17252353
Location : mallappally , kerala
Source : GEM Tenders
LIVE TENDER
tender for muffle furnace-high temperature , digital zoom stereo microscope , rotary vacuum evaporator with vacuum pump , electronic analytical balance , dslr mounted digital microscope , microwave oven , refrigerator , water quality analyser with 9 parameters , optic fibre characteristics apparatus , four probe apparatus , b-h curve apparatus , diaphram vacuum pump , gauss meter with hall probe, ug lab items, continuous working temperature 1400-1700 degree celsius preferred-(stable for long duration runs) temperature accuracy / uniformity +/- 1 degree celsius inside the central thermal work zone heating rate programmable from 1 degree celsius to 10 degree celsius per minute sensor / thermocouple type b (pt-30rh/pt-6rh) thermocouple with cold-junction compensation heating elements minimum 4 to 6 numbers of u-shaped high-grade molybdenum disilicide elements positioned on opposite sides. size-11x11x23cm power controller phase angle control thyristor (scr) power drive unit with soft-start, soft-stop, and current-limiting features to protect heating elements temperature controller microprocessor-based auto-tune pid programmable controller with at least 30 ramp/dwell segments input power supply 220-240v ac single phase with 50 hz. door mechanism parallel-action side-swing or vertical upward lifting insulated plug door designed to keep the hot face away from the operator. automatic cut-off safety door-interlock switch that cuts power to the heating elements immediately upon door opening trip protections hardware-based over-temperature limiter, broken thermocouple sensor trip, and over-current semiconductor fuse protection microprocessor-controlled ultra-wide range static voltage stabilizer with isolation rated capacity 5 kva /4000w (heavy duty single phase) input voltage operating range extremely wide range of 75v - 300v ac (sine wave)output voltage regulation 220v ac +/- 1% (constant stabilized output)-, commissioning and demonstration of high-performance digital zoom stereo microscope with dedicated/integrated digital camera, software and illumination. optical system- greenough or parallel/galilean, 3d stereoscopic viewing, anti-fungal and anti-reflective optical coatings. viewing head- trinocular/dedicated digital head, 45 deg inclined, 360 deg rotatable, pupillary distance 54-76mm, diopter adjustment +/-5. eyepieces- paired high-eyepoint ewf 10x, fov greater than or equal to 22mm, eyeglass compatible. zoom- continuous ratio greater than or equal to 6.5to1, objective 0.7x-4.5x with click-stops. magnification- 7x-45x, expandable to 90x/180x with optional auxiliary lenses and 20x eyepieces. working distance- greater than or equal to 100mm. camera- scientific-grade uhd cmos/scmos colour sensor, greater than or equal to 1/2.5 inch. resolution- 4k uhd (8mp) live via hdmi, greater than or equal to 12mp still capture via usb 3.0. frame rate- greater than or equal to 30fps at 4k via hdmi and greater than or equal to 30fps via usb 3.0. illumination- variable/dimmable led ring or dual gooseneck led incident light, built-in sub-stage led transmitted light. stand- heavy-duty rigid pillar/track stand with integrated focus, coarse/fine focus and tension adjustment, base greater than or equal to 280x240mm. software- live preview/capture, image stitching, edof, hdr, real-time calibration and measurement of length, area, perimeter, angles, radius, circle-to-circle and point-to-point, export data/images to excel, word and pdf. compatibility- windows 10/11 64-bit. power- 220-240v ac, 50hz, indian 3-pin plug. documentation- user manual and software license keys., brushless dc motor, rotation speed range 20 to 300 rpm with digital display and smooth-start function. lift mechanism motorized or manual quick-action lift with automatic safety drop/lift-out function during power failure. condenser vertical double-coiled glass condenser made of 3.3 borosilicate glass, cooling surface area greater than or equal to 1500 sq. cm. heating bath stainless steel-ss316 with ptfe coating or dedicated non-stick surface, capacity 2 to 5 liters, temperature range ambient to 180 deg. celsius with +/- 1degree celsius accuracy. flask capacity 2000 ml evaporating flask and 2000 ml receiving flask standard. vapor tube and seals vacuum control facility must be provided. removable vapor tube with lock indicator- vacuum seals made of graphite-filled ptfe for chemical resistance. diaphragm vacuum pump specifications pump type two-stage, oil-free, chemically resistant ptfe diaphragm pump. flow rate minimum approx. 20 to 34 l/min. ultimate vacuum less than or equal to 10 mbar (preferred less than or equal to 5 mbar for low-boiling solvents). wetted parts peek, ptfe, or highly chemical-resistant fluoroelastomers on all valve and head assemblies. power and compliance operates on 220-240 v ac, 50 hz, electronic analytical balance with the draft shield chamber. weighing range 220 g. readability resolution 0.1 mg or 4 decimals up to 220 g. repeatability -std. dev. less than or equal to 0.015 mg at lower range less than or equal to 0.08 mg at full load. linearity deviation +/- 0.03 mg at lower range +/- 0.1 mg at nominal load. stabilization time ultra-fast tracking less than or equal to 2.0 seconds for 0.01 mg resolution. minimum weight -usp- 20 mg or lower -complying with usp chapter 41 for absolute accuracy. calibration system fully automated isocal / profact motorized internal calibration triggered dynamically by ambient temperature changes - delta t greater than or equal to 0.5 k- or timed intervals. draft shield technology motorized, contactless gesture-controlled sliding doors -top, left, right- to eliminate vibration from physical contact. data integrity and compliance full 21 cfr part 11 compliance with built-in audit trails, electronic signatures, and multi-level user password management -no external software required- connectivity ports integrated ethernet -rj45, usb-a, usb-b, and rs232 for direct server/lims data transfer without pc middleware., optical system and head - head type trinocular (30 deg. inclined, rotatable 360 deg.) with a dedicated vertical photo port for camera mounting. optical design infinity-corrected optical system to prevent image distortion during magnification. eyepieces - 10x widefield high-eyepoint eyepieces (f.n. 20mm) with anti-fungal coating. objective lenses achromatic or plan achromatic 4x, 10x, 40x (s), and 100x (oil immersion) offering up to 1000x standard optical magnification. stage and focusing mechanism stage double-layer rackless mechanical stage (e.g., 140 x 132 mm) with a low-position coaxial control knob. movement range x-y axis travel range around 75mm x 50mm. focusing - coaxial coarse and fine focus adjustment mechanisms with tension control and limit stopped. illumination and power light source ultra-bright 3w led or 6v/20w halogen variable illumination system providing true daylight colour temperature. condenser abbe condenser (n.a. 1.25) with iris diaphragm and filter holder. power supply - universal input 100v-240v ac, 50hz. dslr camera integration and adapter mount compatibility specific dslr brand mounts via a specialized t-mount adapter and low-profile microscope t2 ring. camera adapter magnification - intermediate adapter optics typically features 2x or 4x magnification factors to project the image correctly onto the dslr sensor without heavy vignetting. shutter control - electronic remote shutter or pc tethering to minimize mechanical shake during image capture., capacity - 20 to 32 liters, microwave frequency - 2450 mhz, power output (microwave) 800w to 1000w, power consumption - 1200w to 2100w, electrical input - 230v, 50hz single-phase ac supply. solo (basic heating), grill (heating + grilling coil), or convection (heating + fan for baking/roasting) control panel - touch keypad (membrane) or mechanical dials, safety - child lock system, overheating protection, and thermal fuse - convenience auto-cook menus, weight defrost, express cooking, and steam-clean functions, gross/net capacity measured in liters 200l or cubic feet. net capacity indicates usable space. dimensions - width (typically 55 cm to 90+ cm), height (130 cm to 180+ cm), and depth. defrost type - direct cool (manual defrost) or frost-free (automatic air circulation). compressor - inverter or standard reciprocating compressor for temperature regulation. refrigerant - eco-friendly gas types like r600a (cfc-free). features and build configuration - single door, double door (top/bottom freezer), side-by-side, or french door. add-ons led lighting, digital displays, built-in ice makers, and convertible zones., microprocessor-controlled, modular benchtop multiparameter water quality analysis system. simultaneous channels - minimum 4 independent, galvanically isolated measurement channels supporting simultaneous logging and display of distinct modules without cross-talk. display unit - 7 inch high-resolution colour capacitive touch screen with multi-touch operation, real-time graphical plotting, and on-screen procedural video tutorials. parameters - ph, orp (mv), ion selective electrode (ise) , conductivity 0.001 micros/cm to 1000 ms/cm , tds 0 to 400 ppt , resistivity up to 100 mohm.cm , salinity 0.00 to 80.00 ppt. - dissolved oxygen (do) 0.0 to 50 mg/l (ppm), 0 to 600% saturation with automatic barometric pressure and salinity compensation. temperature -20.0 deg. celsius to 130.0 deg. celsius, resolution 0.1 deg. celsius, accuracy +/-0.1 deg. celsius. temperature compensation - automatic (atc) or manual (mtc) across 0-100deg. celsius with selectable compensation coefficients (linear, pure water astm, and natural water iso-7888). calibration - 1 to 6 points auto-recognition for ph (usa, nist, din, custom buffers), 1 to 5 points for conductivity and ise. data management and glp compliance - non-volatile memory storing greater than or equal to 1,000,000 data sets with time/date stamp, sample id, and sensor serial number tracking. connectivity and peripherals - dual usb-a (for keyboard, flash drive, printer), usb-c (for pc link), ethernet port, and built-in wi-fi for direct lims integration and secure ftp/email data export. power supply - universal 240 vac adapter, 5v/12v dc output with internal backup battery cell for real-time clock maintenance., setup to measure various characteristics of optical fibre - for ug lab, resistivity and bang gap measurement of semiconductors - for ug lab, to plot b-h curve of ferromagnetic materials - for ug lab - cro not required, for using with desiccator, for ug lab
Agency / Dept :
department of collegiate education
Due Date :
Sep 29, 2026 (8 days left)
Tender Value :
14.75L
View Documents
T18 Ref No : 17335063
Location : chandigarh , chandigarh
Source : GEM Tenders
LIVE TENDER
tender for scalpel bp handle , towel forceps mayo , towel clip xaction , artery forceps mosquito straight , artery forceps mosquito curved , skin hook mcindoe , adson forceps serrated , adson forceps 1x2 teeth , sponge forceps foerster , dissecting forceps narrow serrated , needle holder mayohegar , ear specula hartmann , retractor mollison , sickle knife kley , sickle knife , flap knife plester , round knife , micro ear scissors , crocodile cup forceps , crocodile serrated forceps , malleus nipper housedieter , suction tube frazier lempert , elevator farabeuf , mayo scissors , retractor senn miller kilner , ball probe goldman , curette house , seeker curette macewen , speculum endaural lempert storz , tumarkin transmeatal specula , instrument rack , house elevator , forceps vein graft press king , adaptor house fisch with cutoff luer , cannula verhoeven luer , elevator freer , scissors curved , iris scissors , scissors cartilage cutting serrated , micro scissors flat grip , rae tubes of all size , forceps nasal polypus watson williams , forceps nasal turbinate luc small oval , forceps nasal turbinate luc medium oval , forceps nasal turbinate luc large oval , aspirating dissector negus freer , elevator freerlempert , gouge nasal tilley , knife nasal cartilage ballenger , suction tube with ball tip keyhole control , speculum nasal cottle , forceps septum straightening asch , forceps septum straightening walsham , heymann nasal turbinectomy scissors , forceps tilley fine , mallet , punch rongeur frontal sinus , blakesleywilde ethmoid forceps solid , blakesley ethmoid forceps thrucut , scissors nasal solid , maxillary sinus forceps , stammberger forceps , stammberger antrum punch , frontal sinus jcurette kuhnbolger , suction cannula eicken , kerrison punch rongeur , tongue depressor lack , derma stool with adjustable height , wooden lamp , dermavission h h, scalpel blade, no 7 18 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 125 cm 5 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 8 cm 325 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 3 mm 19 cm 725 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 2 mm 12 cm 475 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 8 in 10 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 4 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 15 cm 6 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, set of 3 3 mm 4 mm and 5 mm surgical grade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 4x4 prong curved sharp 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 6 mm curved 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, oval vertical 25 x 35 mm 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 45 degree 3 mm 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 45 degree 15 mm 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight 4 mm blade 8 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight approx 1 mm jaw 8 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, up approx 1 mm jaw 8 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, right curved 8 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, left curved 8 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight 35 mm jaw 8 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, upward 8 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 3 mm 19 cm 75 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, curved 8 mm 15 cm 6 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, curved 165 cm 65 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, sharp double ended 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 08 mm 45 degree 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight 3 mm 25 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, round 19 cm 75 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 14 cm 55 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, black set of 4 4 5 6 and 7 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, stainless steel for straight instruments surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 1 mm 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 16 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 55 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 75 cm assorted sizes surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 4 mm sharp with tamper surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 35 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, standard ent micro use surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 19 cm 75 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight curved variants as per marked list surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, all sizes as required preformed rae endotracheal tube medicalgrade nontoxic and kinkresistant material smooth atraumatic tip with radiopaque marking sterile singleuse and individually packed clear size depth marking adequate residual shelf life at the time of supply, serrated edges 12 cm 475 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 19 cm 75 in dia 60 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 19 cm 75 in dia 75 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 19 cm 75 in dia 90 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 21 cm 825 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, double ended 20 cm 8 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, vshaped 5 mm 17 cm 675 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight revolving 20 cm 8 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 1 mm 19 cm 75 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 2 mm 19 cm 75 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 4 mm 19 cm 75 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 35 mm 14 cm 55 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 7 mm width x 75 mm length surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 22 cm 875 in all jaws surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 23 cm 9 in universal surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, light 18 cm 7 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 55 mm 125 cm 5 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, approx 20 cm 8 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 2 mm 70 degree surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, pointed approx 19 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight 3 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight 4 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 45 degree 3 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 45 degree 4 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 90 degree 3 mm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, straight approx 11 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 45 degree approx 125 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 70 degree vertical opening surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, tubular rotatable 35 mm working length approx 11 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 55 degree curved approx 19 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 90 degree curved approx 19 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 25 mm long curved approx 15 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 3 mm long curved approx 15 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, 4 mm short curved approx 15 cm surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, curved up 3 mm approx 18 cm 7 in surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, set of 3 surgicalgrade stainless steel ss410 or equivalent suitable surgical grade reusable fully autoclavable corrosion stain resistant smooth finished working surfaces manufacturer identification permanently engraved marked minimum 01year warranty against manufacturing defects, heightadjustable dermatologist doctor stool stable corrosionresistant metal base frame cushioned easytoclean seat smooth 360 degree rotation pneumatic hydraulic height adjustment with secure locking suitable for routine opd use minimum 01year warranty against manufacturing defects, dermatology woods lamp type examination light longwave uva output around 365 nm suitable for fluorescence examination of skin hair lowheat illumination compact and easy to clean minimum 01 year warranty against manufacturing defects, handheld compact dermatology skin visualization device lightweight design led illumination minimum 10x magnification suitable for close examination of skin surface pigmentation complete readytouse unit with standard accessories minimum 01year warranty against manufacturing defects
Agency / Dept :
indo tibetan border police ITBP
Due Date :
Oct 09, 2026 (18 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16357981
Location : faridkot , punjab
Source : GEM Tenders
tender for brake shoe , deration tank , fog light , wheel brg , rotating light , wiper blade , head light , chain sprocket, brake shoe, re, stln, hh
Agency / Dept :
indian army
Due Date :
Aug 01, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16589244
Location : faridkot , punjab
Source : GEM Tenders
tender for brake shoe , deration tank , fog light , wheel brg , rotating light , wiper blade , head light , chain sprocket, brake shoe, re, stln, hh
Agency / Dept :
indian army
Due Date :
Aug 14, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Rotating Light. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Rotating Light sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Rotating Light Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Rotating Light, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Rotating Light Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Rotating Light Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Rotating Light.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Rotating Light depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Rotating Light Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Rotating Light bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Rotating Light. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Rotating Light, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Rotating Light, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Rotating Light?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Rotating Light tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Rotating Light?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Rotating Light, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Rotating Light is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All