Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

282Latest Rod guide Tenders List

Latest Rod guide Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Rod guide tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Rod guide tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Rod guide Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Rod guide tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Rod guide Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Rod guide Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Rod guide Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Rod guide tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Rod guide Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Rod guide sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Rod guide tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Rod guide tenders.

Is EMD mandatory for all Rod guide tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Rod guide work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Rod guide tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Rod guide Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17777927
Location : mumbai , maharashtra
Source : GEM Tenders
NEW TENDER
corrigendum tender for eniso4032-m8-a4l-80 , ed6061d-ensio4032-m16-8-a2c , ed6061d-ge30txg3e-2ls , ed6061d-gsm124-001a540 , ed6061d-gsm141-003f4dn6-2 , ed6061d-gsm141- 003f4dn8-2 , ed6061d-h190-1-88nbr-101 , ed6061d- ha22f1a , ed6061d-iso10642-m10x30-a4l-80 , ed6061d- iso2009-m6x20x20-a4l-80 , ed6061d-iso4014- m16x160x44-z5cnd , ed6061d-iso4017-m12x35-8-8-zu , ed6061d-iso4017-m14x40-a4l-80 , ed6061d-iso4017- m16x80-a4l-80 , ed6061d-iso4032-m10-8 , ed6061d- iso8735-16x30-c1 , ed6061d-mat164-0315f1 , ed6061d- mat658-0066 , ed6061d-mat677-0129f1-a-f9 , ed6061d- nl-20 , ed6061d-r4579-0 , ed6061d-sei-103 , ed6061d- snlim10 , ed6061d-snlim18 , ed6061d-sr770852502940 , ed6061d-stf33-02 r004edn18inox , ed6061d-stf330702 034ede10-20 , ed6061d-ti2960 , ed6061d- 010489ressortbronze , ed6061d-5310jj-dn12 , ed6061d-e25112b200m80qval , ed6061d-019-335-00x2- 50-20a8-gn , ed6061d-031919 , ed6061d-0930930114405 , ed6061d-0930930262107 , ed6061d-164-0367-f5 , ed6061d-214-1389-f8 , ed6061d-214-1389-f9 , ed6061d- 214-1427-f10 , ed6061d-214-1427-f13 , ed6061d-214- 1427-f22 , ed6061d-214-1427-f23 , ed6061d-214-1427- f26 , ed6061d-214-1427-f9 , ed6061d-214-1461-f7 , ed6061d-214-1503-f3 , ed6061d-214-1542-f26 , ed6061d-214-1567-f8 , ed6061d-214-1567-f9 , ed6061d- 214-1593-f2 , ed6061d-214-1620-f1 , ed6061d-214-1620- f2 , ed6061d-214-1620-f4 , ed6061d-214-1620-f8 , ed6061d-5305-14-537-6813 , ed6061d-5305145376486 , ed6061d-5330-14-507-4204 , ed6061d-5330-14-524-0906 , ed6061d-5330-14-524-0908 , ed6061d-5330145240907 , ed6061d-5330145240912 , ed6061d-9980000044748 , ed6061d-aig5x25-8br , ed6061d-ap165x205x16 , ed6061d-ap285x325x16 , ed6061d-c31-111-1-5 , ed6061d-e-gt-20097-40-55a , ed6061d- e22306a300lqjucd , ed6061d-e25112b160m65qvacm , ed6061d-e25114b160q40gps , ed6061d- e25114b160q45qvacg , ed6061d-e25114b220q60gps , ed6061d-e25114b300q30gps , ed6061d- e25114b360q50gps , ed6061d-e25401b240qbzb , ed6061d-e27624-120axtl , ed6061d-v002-v-chc- m10x25x25 , ed6061d-stf33-02-ve010-e-h-m24 , ed6061d-stf33-02-ve010-e-h-m16 , ed6061d-stf33-02- r004dn24inox , ed6061d-stf33-02-r004dn16acier , ed6061d-stf33-02-r003-dn24-inox , ed6061d-stf33-02- r003-dn20-inox , ed6061d-mat215-0174-d , ed6061d- iso4762-m16x50x50-8-8 , ed6061d-iso4032-m10-a4l-80 , ed6061d-iso4017-m8x50-a4l-80 , ed6061d-01141-0-00 , ed6061d-02527-0-10 , ed6061d-0999514202 , ed6061d- 0999520126 , ed6061d-522553 , ed6061d-slk-102-usb- qwerty , ed6061d-518772 , ed6061d-09ep002c0058 , ed6061d-504561 , ed6061d-485055 , ed6061d-504559 , ed6061d-504560 , ed6061d-488422 , ed6061d-627156 , ed6061d-487590 , ed6061d-485054 , ed6061d-627152 , ed6061d-627155 , ed6061d-507424 , ed6061d-485020 , ed6061d-487100 , ed6061d-627154 , ed6061d-627153 , ed6061d-509625 , ed6061d-484995 , ed6061d-484987 , ed6061d-487045 , ed6061d-488065 , ed6061d-485021 , ed6061d-485019 , ed6061d-485022 , ed6061d-484986 , ed6061d-519938 , ed6061d-489908 , ed6061d-507423 , ed6061d-487008 , ed6061d-511491 , ed6061d-mat164-, stern gland thrust block and inflatable seal for p 75, nord-lock wash 6, set of 2 fasteners, rigid fasteners, chaom range 150, lockwire dia 0.8 st.steel, type 2 damper, standard safety washer de 16, o-ring 20x2.65, stainless steel lock tab washer dn16,, damper washer, simrit bellow, lock washer, bearing cap, pusher, spring, pushing bolt, lower lockwasher, upper lockwasher, nut m60x2, chloroprene washer, bottom protection, brake pad, plaquette brake, lantern seal, adjusting shim 487372, adjusting shim 487373, adjusting shim 487374, lockwasher, trapezoidal seal, roller, pulley, outside flange, flat seal, upper stop, lower stop, laminated spacer, peelable shim, axial ball joint m, axial ball joint f, castellated nut m160, fitted screw, positioning pin, lev.process.module, processing module- m.bt.14.h21 18 (z03-z04), nut h m16 z3cnd22-05 az, stainless steel lock tab washer dn8, nord-lock wash 12, screw h m10x30x30 steel cl 8.8, screw h m 8x25x25 8.8 b198, scraper as 100, ring as75, gask.b0174-218-804, guide ring dfi, locknut m60x2, lockwasher dn60, screw h m 14x90x34 8-8 b198, screw h m16x140x44 z5cnd17-04-01, screw h m8x100x22 8.8, screw h m4x10x10, nut h m 24 steel cl8-8, screw fhc/90 m10x25 8-8, stainless steel lock tab washer dn12, stainless steel lock tab washer dn14, lock tab washer nd 16, stainless steel lock tab washer dn6, screw h m8x180x180 a4-80, screw h m8x35x35 a4 80, nut h m20 cl8 zn-bi, nut h m8 a4l-80, chromated nut h m 16 cl8, radial ball joint, lip seal dia.540, simrit seal h190-1, fuse 1a ha22, screw fhc/90 m10x30x30 stainless steel, screw fs m6x20x20, iso4014-m16x160x44-z5cnd170401/screwhm16x160-44z5cnd17-04-01, srew hm 12x35x35 cl8-8 coated, screw h m14x40x40 inox a4l-80 8.8, screw h m16x80x80 a4l-80, nut h m10 steel cl 8.8, cylindr. pin 16x30, capacity screw for ss pipe de 10.2, position sensor, washer snl20, self-align. roller, threaded wire clamp d3-4, stainless steel lock washer de10, nord-lock wash 18, closed cable holder chain, nd 18 plain washer, stainless steel, ruch seal plan nd6 od10,2 made of rubber, bushing, lock washer dn12, screw h m 20x80x46 8.8 b198, o-ring 335x7 20a8, colson collar 9x350 rilsan, stud rod diameter pitch m20- 116 x4crnimo16-5-1, screw h m12x25x25 class 8.8, ring for crimped ring union mm8, transverse stock/yoke key, lock bar of transverse key s275 k2 g3, nut retainer z6cnt18-10, transverse stock/blade key 80 hles, screw retainer s275 k2 g3, stud rod m16x175 stainless steel, spring steel class c1, transverse rudder fin/gudgeon key 80 hles, transverse rudder blade/pintle key 80 hles, gasket 278x232x3 fibre, locking bar s275k2g3, transverse plane blade/pintle key 80 hles, locking plate s355k2g3, screw h m16-100/100 stainless steel, screw h m8x50x50 a4l-80, gasket 207x241x2 asbestos-free fibre +elastomer, gasket 120x220x3 fibre, gasket 480x560x3 fibre, gasket 295x333x2 asbestos- free fibre+elastomer, screw chc m12-40/40 cl8-8, needle 5x25.8 br, lip ring cefiseal nitrile, locking wire copper dia1.5mm, guiding strap e/gt series ptfe, slotted nut m30x150, screw hm16-65/38 cl8-8, screw hm16-40/40 polyethylene lp, screw hm16-45/45 cl8.8, screw h m22-60/60 polyethylene lp, screw h m30-30/30 polyethylene lp, screw h m36-50/50 polyethylene lp, nut hm 24, serrated washer dec 12 steel, screw chc m10-25/25 cl8-8, nut h style 1 m24 z6cnd18.05.01, nut h style 1 m16 z6cnd18.05.01, lock tab washer nd24 stainless steel, lock tab washer nd16 galv. steel, nord lock washer nd24, nord lock washer nd20 steel, operating press of rudder gear, screw chc m16-50/50 cl8.8, nut h m10 stainless steel, screw h m8-50/50 stainless steel, thermostat, slimline light, on/off switch, pc computer, lcd screen 21 inch, converter module, qwerty keyboard, hoist ram, hf whip idler holding and guiding device, intermediate cable clamp, lining tightening lower nut, input cable clamp, lower cable clamp, hull bearing fitting, protection band 5, bracket, lining tightening upper nut, protection band 1, protection band 4, drain screw, lining tightening nut, gasket stop, protection band 3, protection band 2, fixed blanking plate, castellated nut, bellows mating flange, bumper, braking lug, lip seal, slide holding screw, adjusting shim, capacity screw ruch de 21.34, seating washer
T18 Ref No : 17779551
Location : jhansi , uttar pradesh
Source : GEM Tenders
NEW TENDER
corrigendum tender for 283401 brg shel for connect rodcap wds 6 , 28340102 insert valve left seat wds 6 , 28340102 insert valve right seat wds 6 , 283403 bear shell for connect rod wds 6 , 283403 chrome plated liner cyl wds 6 , 283403 intake snf exhaust vlv spring wds 6 , 283403 piston pin with sleeve wds 6 , 28340302 air blower plummer block wds 6 , 28340302 cam shaft assy wds 6 , 28340302 lubricating oil pump wds 6 , 28340302 mr and fp pressure guage wds 6 , 28340302 nozzle opening sleeve wds 6 , 28340302 spring seat for loco wds 6 , 28340302 spring seat lock wds 6 , 28340302 stud opening sleeve wds 6 , 28340302 valve lever yoke guide wds 6 , 28340501 piston piston ring set wds 6 , 283403 gasket top cyl liner to blk wds 6 , 283403 gasket exhaust manifold wds 6 , 283403 gasket cranks cover to base wds 6 , 283403 gasket,manifold to cyl head wds 6 , 283403 gskt centr cyl liner to blk wds 6 , 283403 gskt,branch pipe to header wds 6 , 283403 gskt,brnch pipe to cyl head wds 6 , 283403 gskt,lever case to cyl head wds 6 , 28340302 gasket of bottom wds 6 , 28340302 gasket of indicator plug wds 6 , 28340302 gasket cover to support wds 6 , 28340302 gasket,elbow to cyl block wds 6 , 28340302 gasket elbow to cyl head wds 6 , 28340302 gskt fuel filter to cover wds 6 , 28340302 gskt over head to housing wds 6 , 28340302 gskt support cover to blk wds 6, loco spares, bearing shell for connecting rod cap for wds 6 loco 1400hp part no 10150055 make dlw, varanasi., insert valve seat left standerd size of wds 6 loco 1400hp part no 10240391 make dlw varanasi., insert valve seat rightstanderd size of wds 6 loco 1400hp part no 10240380 make dlw varanasi., bearing shell for connecting rod for loco wds 6 1400 hp part no 10150043 make dlw varanasi., liner cylinder chrome plated for wds 6 loco 1400hp part no 10120579 make dlw varanasi., intake and xhaust valve spring for wds 6 loco 1400hp part no 10160115 make dlw varanasi., piston pin with sleeve for wds 6 loco 1400hp part no 10030049 make dlw varanasi, plumber block of air blower no lsag 138 jbl for wds 6 loco 1400hp make dlw varanasi, cam shaft assembly for wds 6 loco 1400hp part no 10030219 make dlw varanasi, lubricating oil pump of wds 6 loco 1400hp part no 10060418 make dlw varanasi, main reserve &feed pipe pressure guage for wds 6 loco 1400hp part no 11440193 make dlw varanasi., nozzle opening sleeve for wds 6 loco 1400hp part no 10240184 make dlw varanasi, spring seat for wds 6 loco 1400hp part no 10210520 make dlw varanasi, spring seat lock for wds 6 loco 1400hp part no 10210477 make dlw varanasi, stud opening sleeve for wds 6 loco 1400hp part no 10230567 make dlw varanasi, valve lever yoke guide for wds 6 loco 1400hp part no 10210714 make dlw varanasi, piston piston ring set for wds 6 loco 1400hp part no 10141480 make dlw varanasi, gasket top cylinder liner to block for wds 6 loco 1400hp part no 10170560 make dlw varanasi, gasket exhaust manifold for wds-6 loco 1400hp part no 10170482 make dlw varanasi., gasket cranks cover to base for wds 6 loco 1400hp part no 10170248 make dlw varanasi, gasket manifold to cyl head for wds 6 loco 1400hp part no 10170479 make dlw varanasi, gasket centre cylinder liner to block for wds 6 loco 1400hp part no 10170595 make dlw varanasi, gasket branch pipe to header for wds 6 loco 1400hp part no 10170583 make dlw varanasi, gasket branch pipe to cyl head for wds 6 loco 1400hp part no 10170303, make dlw varanasi, gasket of vlv lever casing to cyl head for wds 6 loco 1400hp part no 10170686 make dlw varanasi., gasket bottom for wds-6 loco 1400hp part no 10170595 make dlw varanasi, gasket of indicator plug for wds 6 loco 1400hp part no 10170625 make dlw varanasi, gasket cover to support for wds 6 loco 1400hp part no 10170170 make dlw varanasi, gasket elbow to cyl block for wds 6 loco 1400hp part no 10170522 make dlw varanasi, gasket,elbow to cyl head for wds 6 loco 1400hp part no 10170510 make dlw varanasi, gasket fuel filter to cover for wds6 loco 1400hp part no 10170194 make dlw varanasi, gasket over head to housing lub oil filter for wds 6 loco 1400hp part no 10170224 make dlw varanasi, gasket support cover to block for wds 6 loco 1400hp part no 10170601 make dlw varanasi

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 17780614
Location : leh , ladakh
Source : GEM Tenders
NEW TENDER
tender for repair and overhauling service - cars; tata safari complete engine machine 1 job, cylinder boring/ sleeve fitting, , crank grinding, cam/connecting rod bushing, main & big end setting, head facing, checking oil & water ways, head valve/seat/guide fi.. , repair and overhauling service - cars; tata safari high pressure pump repair & overhauling with material & labour charge; no; buyer premises , repair and overhauling service - cars; tata safari injector repair (04 nos)& overhauling with material & labour charge; no; buyer premises , repair and overhauling service - cars; tata safari common rail fuel pressure setting; no; buyer premises , repair and overhauling service - cars; tata safari alternator repair & overhauling with material & labour charge; no; buyer premises , repair and overhauling service - cars; tata safari self starter repair & overhauling with material & labour charge; no; buyer premises , repair and overhauling service - cars; mahindra scorpio complete engine machine 1 job, cylinder boring/ sleeve fitting, , crank grinding, cam/connecting rod bushing, main & big end setting, head facing, checking oil & water ways, head valve/seat/guid.. , repair and overhauling service - cars; mahindra scorpio turbo charger repair & overhauling with material & labour charge; no; buyer premises , repair and overhauling service - cars; mahindra scorpio high pressure pump repair & overhauling with material & labour charge; no; buyer premises , repair and overhauling service - cars; mahindra scorpio injector repair (04 nos)& overhauling with material & labour charge; no; buyer premises , repair and overhauling service - cars; mahindra scorpio common rail fuel pressure setting; no; buyer premises , repair and overhauling service - cars; mahindra scorpio alternator repair & overhauling with material & labour charge; no; buyer premises , repair and overhauling service - cars; mahindra scorpio self starter repair & overhauling with material & labour charge; no; buyer premises , repair and overhauling service - cars; mahindra bolero camper dpf cleaning and egt (exhaust gas treatment) system complete repair with vehicle diagnostics charges; no; buyer premises
T18 Ref No : 17597084
Location : leh , ladakh
Source : GEM Tenders
LIVE TENDER
tender for air clear element , avr plate , fuel feed pump with fuel filter assy , fuel injection pump , fuel pipe line 17x19 , oil filter , piston ring set std , head gasket , fuel pump , injector nozzle , fd coil , head gasket , push rod , main bearing , blower assy , oil filter , pistion ring set , piston , push rod seal lower , push rod seal upper , rocker arm assy , fuel filter , fuel feed pump assy , air filter , push rod assy , injector assy , crank shaft thrust washer set 4 piece , impeller housing assy , cr bearing set , crank shaft oil seal , sleeve std , self starter assy , fuel pipe line tank to feed pump , fuel filter , pistion assy , valve oil seal , benjo nut , fuel fillter , piston ring set , fuel pipe 17x19 , cylinder liner , cr bearing seal set 4 pieces big end seal set , main bearing set 6 pieces , crank shaft seal front fly wheel side , fip return benjo bolt , air filter , injector assy , common rail 3 cyl engine , fuel injection pump , gaskit fip , filter element master trem iv dom , sigle bowl filter element with o ring , outer air element , safety air element , engine oil , fuel line pipe , fuel pipe tank to pump , injector nozzle , head assy complete , turbo charger , turbo charger pipe in and out , inter cooler , fuel filter assy , push rod pipe , big end brg set , pre filter insert , main filter spin on , main element , cogged v belt , rakshak gen set oil , sensor with assy , fuel feed pump with assy , self starter 24 volt , tapped gasket , trubo charger , oil filtter , main beraring set 10 piece , crank shaft thrust washer set 4 piece , push rod guide , push tube seal , cr bearing seal set 8 piece big end seal set , self starter solenoid assy 24 volt , alternator regulator 24 volt , water pump , piston ring , connecting rod , solonide switch , push rod , egr assy , inzector nozzle , radiator hose set , turbocharger assy , thermostate valve , hose pipe clamp , crank shaft thrust washer set 4piece , main bearing std , valve set inlet and exhaust , sleeve oil seal set , packing kit , crank shaft assy , head assy valve oil seal , benzo washer , fuel pipe 52 inches , self starter 12 v , alternator 12 v , avr , fuel pipe 32 inch , tappet gasket , turbo charger, mta ii genr spare, air clear element, avr plate, fuel feed pump with fuel filter assy, fuel injection pump, fuel pipe line 17x20, oil filter, piston ring set std, head gasket, fuel pump, injector nozzle, fd coil, head gasket, push rod, main bearing, blower assy, oil filter, pistion ring set, piston, push rod seal lower, push rod seal upper, rocker arm assy, fuel filter, fuel feed pump assy, air filter, push rod assy, injector assy, crank shaft thrust washer set 4 piece, impeller housing assy, cr bearing set, crank shaft oil seal, sleeve std, self starter assy, fuel pipe line tank to feed pump, fuel filter, pistion assy, valve oil seal, benjo nut, fuel fillter, piston ring set, fuel pipe 17x20, cylinder liner, cr bearing seal set 4 pieces big end seal set, main bearing set 6 pieces, crank shaft seal front fly wheel side, crank shaft thrust washer set 4 piece, fip return benjo bolt, air filter, injector assy, common rail 3 cyl engine, fuel injection pump, gaskit fip, filter element master trem iv dom, sigle bowl filter element with o ring, outer air element, safety air element, engine oil, fuel line pipe, fuel pipe tank to pump, injector nozzle, head assy complete, turbo charger, turbo charger pipe in and out, inter cooler, fuel filter assy, push rod pipe, big end brg set, pre filter insert, main filter spin on, main element, cogged v belt, rakshak gen set oil, sensor with assy, fuel feed pump with assy, self starter 24 volt, tapped gasket, trubo charger, oil filtter, main beraring set 10 piece, crank shaft thrust washer set 4 piece, crank shaft seal front fly wheel side, push rod guide, push tube seal, cr bearing seal set 8 piece big end seal set, self starter solenoid assy 24 volt, alternator regulator 24 volt, water pump, piston ring, connecting rod, solonide switch, push rod, egr assy, inzector nozzle, radiator hose set, turbocharger assy, thermostate valve, hose pipe clamp, crank shaft thrust washer set 4piece, main bearing std, valve set inlet and exhaust, sleeve oil seal set, packing kit, crank shaft assy, head assy valve oil seal, benzo washer, fuel pipe 52 inches, self starter 12 v, alternator 12 v, avr, fuel pipe 32 inch, tappet gasket, turbo charger

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 17636694
Location : mysore , karnataka
Source : GEM Tenders
LIVE TENDER
T18 Ref No : 17471242
Location : nashik , maharashtra
Source : GEM Tenders
LIVE TENDER
corrigendum tender for 1 fitting on stringer 6 , 2 fitting on stringer 6 , 3 fittings on stringer 23 , 4 fittings on stringer 23 , 5 bracket , 6 stiffener , 7 stopper , 8 hinge , 9 fitting , 10 fitting , 11 fitting , 12 fitting , 13 fittings of frame 28ak , 14 fittings of frame 28ak , 15 fittings of frame 28bk , 16 fittings of frame 28bk , 17 fittings frame 28bk , 18 fittings frame 28bk , 19 fittings frame 28bk , 20 fittings frame 28bk , 21 fittings of frame 28bk , 22 fittings frame 28bk , 23 profile , 24 profile , 25 profile , 26 profile , 27 profile , 28 profile , 29 profile , 30 profile , 31 bush , 32 slide block , 33 fitting , 34 fitting , 35 upper profile , 36 upper profile , 37 fitting , 38 fitting , 39 wall of frame 45b , 40 hinge , 41 hinge , 42 hinge , 43 bushing , 44 fitting , 45 fitting , 46 angle , 47 doubler , 48 bracket , 49 lateral middle clamp , 50 lateral middle clamp , 51 middle rib , 52 sector , 53 sector , 54 link , 55 handle , 56 support , 57 bosses , 58 bell crank , 59 tie rod , 60 flange , 61 bracket , 62 guide , 63 hook , 64 hook , 65 fitting , 66 fitting , 67 bracket , 68 bracket , 69 bracket , 70 bracket , 71 bracket , 72 bracket , 73 fitters , 74 diaphragm , 75 diaphragm , 76 strut , 77 strut , 78 strut , 79 bush , 80 wall , 81 wall , 82 hatch lining , 83 hatch lining , 84 cover , 85 cover , 86 profile , 87 profile , 88 hinge , 89 shackle , 90 shackle , 91 insert , 92 bracket , 93 bell crank , 94 cam , 95 bracket , 96 bracket , 97 bracket , 98 bracket , 99 bracket , 100 bracket, osaero job work for manufacturing of 100 parts ref semfg981, 11.0247.i.016.001, 11.0247.i.016.002, 11.0247.i.018.001, 11.0247.i.018.002, 11.0247.i.020.001, 11.0250.i.201.900, 11.0255.3.802.900, 11.0400.3.141.900, 11.0445.3.021.001, 11.0445.3.021.002, 11.0445.3.023.001, 11.0445.3.023.002, 11.0445.3.024.001, 11.0445.3.024.002, 11.0445.3.031.001, 11.0445.3.031.002, 11.0445.3.032.001, 11.0445.3.032.002, 11.0445.3.033.001, 11.0445.3.033.002, 11.0445.3.034.001, 11.0445.3.034.002, 11.0446.3.052.001, 11.0446.3.052.002, 11.0446.3.054.003, 11.0446.3.054.004, 11.0446.3.054.005, 11.0446.3.054.006, 11.0446.3.054.007, 11.0446.3.054.008, 11.0446.3.356.900, 11.0446.3.502.900, 11.0610.3.883.001, 11.0610.3.883.002, 11.0610.3.887.001, 11.0610.3.887.002, 11.0620.3.036.001, 11.0620.3.052.001, 11.0620.i.385.001, 11.0650.3.918.001, 11.0650.3.918.002, 11.0650.3.919.900, 11.0670.3.444.900, 11.0670.3.926.003, 11.0670.3.926.004, 11.0670.7.050.039, 11.0670.i.441.900, 11.0720.3.129.004, 11.0720.4.008.001, 11.0720.4.008.002, 11.0720.4.012.900, 11.0730.3.246.001, 11.0730.3.246.002, 11.0730.3.414.900, 11.0730.4.023.900, 11.0730.4.208.900, 11.0730.4.219.900, 11.0730.4.223.900, 11.0730.4.248.900, 11.0730.4.330.001, 11.0730.4.357.900, 11.0730.4.902.001, 11.0730.4.912.001, 11.0730.4.912.002, 11.0780.i.103.001, 11.0780.i.103.002, 11.0780.i.104.001, 11.0780.i.104.002, 11.0780.i.273.001, 11.0780.i.273.002, 11.0780.i.274.001, 11.0780.i.274.002, 11.0790.4.014.900, 11.1000.3.802.001, 11.1000.3.802.002, 11.1012.3.109.105, 11.1012.3.109.106, 11.1012.3.109.107, 11.1100.3.806.900, 11.1102.3.102.001, 11.1102.3.103.001, 11.1102.3.104.001, 11.1102.3.104.002, 11.1250.i.032.001, 11.1250.i.032.002, 11.2010.2.044.001, 11.2010.2.044.002, 11.2030.2.007.001, 11.2030.2.165.001, 11.2030.2.225.001, 11.4100.7.103.900, 11.4100.i.810.001, 11.4200.i.825.001, 11.4210.3.801.900, 11.4804.3.602.900, 11.4920.3.115.001, 11.4920.3.115.002, 11.4930.3.050.001, 11.4930.4.805.001, 11.4950.3.900.001

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 17500113
Location : imphal , manipur
Source : GEM Tenders
LIVE TENDER
tender for x ray view box size 28 x 17 inch , elliptical trainer , seated horizontal leg press , dual lat pull and mid row , assisted pull up and dip machine , hip adductor machine , dual ab and back machine , biceps and triceps machine , recumbent bike , shoulder press machine , arcadia functional trainer , fms test kit , y balance test kit, sports science phase ii, double film led x ray view box with black frame and automatic film activation sensor with variable brightness controller viewing area 43 point 5 x 34 point 5 cm led display 12 v 50 to 60 hz power requirement high glossy led bulbs with dimmer for brightness adjustment power consumption 20 w dimensions length 59 cm width 50 cm weight 4 point 8 kg, led display with dot matrix size 340 x 440 mm display readings including speed time distance calories resistance level watts and pulse stride length 500 x 220 mm magnetic resistance with minimum 20 levels crank arm 254 mm support for preset programmes suitable for elite athletes maximum user weight 150 kg assembly area 2150 x 770 x 1940 mm usb charger and ac power supply product shall have valid bs en iso certification, dual function machine allowing users to work at least two major muscle groups with efficient use of space angle designed for optimal lower body alignment and proper biomechanics weight stack with sound dampeners and magnetized selector 5 inch deep groove pom pulleys for consistent cable tracking 14 gauge machine welded frame stainless steel guide rods heavy duty marine grade cushions multiple adjustment points step through design for safe access unit weight 242 point 5 kg dimensions 92 x 43 x 67 inch maximum weight stack 200 kg with 1 to 2 pulley ratio maximum user weight 227 kg plate increments 5 kg and 7 point 5 kg starting weight for leg press and calf extension 26 kg, dual function machine allowing users to work at least two major muscle groups dual cam system for improved biomechanics and reduced cable slack 14 gauge machine welded frame stainless steel guide rods heavy duty marine grade cushions multiple adjustment points direct drive system with two opposing cams fully adjustable chest and back pad multiple foot supports plate increments 5 kg unit weight 215 kg dimensions 44 x 42 x 57 inch weight stack 100 kg maximum user weight 227 kg, dual function machine for pull ups and dips integrated weight assisted platform to offset user body weight weight stack with sound dampeners and magnetized selector fork 14 gauge machine welded frame stainless steel guide rods heavy duty marine grade cushions multiple adjustment points fold away assist pad plate increments 5 kg unit weight 217 kg dimensions 49 x 41 x 76 inch weight stack 100 kg maximum user weight 227 kg starting weight 6 point 5 kg, combined functionality for hip adduction and abduction length 1406 mm width 850 mm height 1195 mm standard weight stack 70 kg plus weight stack 100 kg machine weight 208 kg knee pads and dual foot positions for leg support and reduced torque around knees robotic welding two coated powder coating pipe gauge more than 3 mm oval or round pipe construction, dual function machine allowing users to work at least two major muscle groups dual cam system for improved biomechanics and reduced cable slack 14 gauge machine welded frame stainless steel guide rods heavy duty marine grade cushions multiple adjustment points direct drive system with two opposing cams fully adjustable chest and back pad multiple foot supports plate increments 5 kg unit weight 215 kg dimensions 44 x 42 x 57 inch weight stack 100 kg maximum user weight 227 kg starting weight for ab crunch and back extension 3 point 5 kg, dual function machine for biceps and triceps training system designed for improved biomechanics and reduced cable slack weight stack with sound dampeners and magnetized selector fork 14 gauge machine welded frame stainless steel guide rods heavy duty marine grade cushions multiple adjustment points adjustable seat back and bottom heavy duty arm pad with chest support plate increments 5 kg unit weight 220 kg dimensions 54 point 5 x 41 point 6 x 57 inch weight stack 100 kg maximum user weight 227 kg starting weight for biceps 5 kg and triceps 3 kg, power operated recumbent bike with 14 resistance levels oversized padded seat step through design for easy access white backlit display with multiple programmes adjustable pedal straps multiple workout programmes display readings including calories time rpm and workout level workout programmes including track hill random and interval maximum user weight 150 kg unit weight 61 kg dimensions 66 x 25 point 9 x 51 inch, plate increments 5 kg unit weight 227 point 5 kg dimensions 55 point 7 x 56 point 6 x 65 point 1 inch weight stack 100 kg maximum user weight 227 kg starting weight 9 kg 5 inch deep groove pom pulleys for consistent cable tracking 14 gauge machine welded frame stainless steel guide rods heavy duty marine grade cushions multiple adjustment points multi position grip for improved biomechanics adjustable starting position for targeting different muscle groups, dual adjustable pulley system with independent weight stacks for bilateral and unilateral exercises digitally controlled resistance or integrated digital display for tracking load repetitions tempo and power output smooth and precise cable movement with high quality pulleys and coated steel cables adjustable pulley height positions heavy duty steel frame integrated touchscreen or digital interface for workout selection data monitoring and user feedback bluetooth and wi fi connectivity ergonomic handles and attachments including d handles triceps rope straight bar and ankle strap built in safety features smooth weight transition minimum resistance range of 0 point 5 kg increments up to at least 100 kg per stack or equivalent digital load space efficient design suitable for sports science and high performance training setups, kit shall include equipment required to conduct all seven original fms tests shall include meter measuring stick or dowel rope for hurdle step test and mcs slide box, test kit developed by functional movement systems grey cook three directional arms extending from a central point in the shape of the letter y minimum arm length 1 point 5 m in each direction arm configuration for anterior posteromedial and posterolateral reach testing lightweight durable plastic or rubber construction non slip surface texture markers or indicator flags on platforms and arms to indicate starting point and measure reach distance calibrated for accuracy full coating coverage across platform surface for consistent traction carrying case suitable for platform and kit components printed instructional materials for setup administration and interpretation of test results on site installation and training shall be provided

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Rod Guide. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Rod Guide sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Rod Guide Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Rod Guide, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Rod Guide Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Rod Guide Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Rod Guide.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Rod Guide depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Rod Guide Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Rod Guide bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Rod Guide. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Rod Guide, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Rod Guide, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Rod Guide?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Rod Guide tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Rod Guide?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Rod Guide, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Rod Guide is declared L1 and is generally awarded the contract