sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

359Latest Protection box Tenders List

Latest Protection box Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Protection box tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Protection box tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Protection box Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Protection box tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Protection box Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Protection box Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Protection box Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Protection box tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Protection box Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Protection box sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Protection box tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Protection box tenders.

Is EMD mandatory for all Protection box tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Protection box work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Protection box tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Protection box Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16655256
Location : sonawari , jammu & kashmir
NEW TENDER
tender for fabrication of m.s fuel tank protection rectangular box, repairs to damaged deck safety fencing railing of wular ital dredger deputed at hajin bandipora of flood mechanical division baramulla
Agency / Dept :
irrigation and flood control department I & FC
Due Date :
Aug 24, 2026 (16 days left)
Tender Value :
27.61K
View Documents
T18 Ref No : 16641953
Location : new delhi , delhi
Source : GEM Tenders
NEW TENDER
tender for electrical cable , electrical conduit , led , ventilating fan , electrical equipments, supply of electrical spares, supply of 1.5sqmm single core (fr-lsh) (is 694) pvc insulated copper conductor industrial cable, 1100v, and pvc sheathed for cables-100 meter standard length and multicolours., supply of 2.5 sqmm single core (fr-lsh) (is 694) pvc insulated copper conductor industrial cable, 1100v, and pvc sheathed for cables-100 meter standard length and multicolours., supply of 4 sqmm single core (fr-lsh) (is 694) pvc insulated copper conductor industrial cable, 1100v, and pvc sheathed for cables-100 meter standard length and multicolours., supply of 6 sqmm single core (fr-lsh) (is 694) pvc insulated copper conductor industrial cable, 1100v, and pvc sheathed for cables-100 meter standard length and multicolours., supply of 2 x 1.5 sq mm cable multi core (is 694) pvc insulated copper conductor (flexible) industrial cable, 1100v, and pvc round sheathed for cables-100m standard length., supply of 2 x 2.5 sq mm cable multi core (is 694) pvc insulated copper conductor (flexible) industrial cable, 1100v, and pvc round sheathed for cables-100m standard length., supply of 3 x 1.5 sq mm cable multi core (is 694) pvc insulated copper conductor (flexible) industrial cable, 1100v, and pvc round sheathed for cables-100m standard length., supply of 3 x 2.5 sq mm cable multi core (is 694) pvc insulated copper conductor (flexible) industrial cable, 1100v, and pvc round sheathed for cables-100m standard length., supply of 3 x 4 sq mm cable multi core (is 694) pvc insulated copper conductor (flexible) industrial cable, 1100v, and pvc round sheathed for cables-100m standard length., supplying of ms conduit medium class of nominal diameter 25mm as required at site., supplying of f.r.l.s. pvc conduit medium class of nominal diameter 25mm as required at site., supplying of f.r.l.s. pvc conduit medium class of nominal diameter 32mm as required at site., supply of 4 x 10 sqmm cable multi core xlpe insuated,armoured aluminium cable of 650/1100 v grade as per is 7098, supply of 4 x 16 sqmm cable multi core xlpe insuated,armoured aluminium cable of 650/1100 v grade as per is 7098, supply of 4 x 25 sqmm cable multi core xlpe insuated,armoured aluminium cable of 650/1100 v grade as per is 7098, supply of led type recess light fixtures 2x2 type with wattage of 36 w with system lumen- 100 lumens/watt (min.) having housing made of crca powder coated sheet/ pdc aluminium with poly carbonate/ opal/ pmma acrylic diffuser with life expectancy of min 50,000 burning hrs for leds and suitable built in/external led driver as per tender specifications & special conditions complete in all respect etc. as required., supply of led type recess light fixtures 4x1 type with wattage of 36 w with system lumen- 100 lumens/watt (min.) having housing made of crca powder coated sheet/ pdc aluminium with poly carbonate/ opal/ pmma acrylic diffuser with life expectancy of min 50,000 burning hrs for leds and suitable built in led driver as per tender specifications & special conditions complete in all respect etc. as required., supply of led type recess round shape downlight fixture having 168 mm cut out diamater with wattage of 18 w (min), system lumens -100 lumens/watt (min.) having housing made of powder coated dye cast aluminium and opal/ acrylic/ high eff. translucence diffuser with life expectancy of min 50,000 burning hrs for leds and suitable built in/external led driver as per tender specifications & special conditions complete in all respect etc. as required., supply of led type recess round shape downlight fixture having 138 mm cut out diamater with wattage of 12w (min), system lumens -1200 lm (min.) having housing made of powder coated dye cast aluminium and opal/ acrylic/ high eff. translucence diffuser., supply of 36 watt led streat lights suitable for operating in outdoor condition with ip 65 of higher protection with life expectancy of min 50,000 burning hrs for leds and suitable built in/external led driver as per tender specifications & special conditions complete in all respect etc. as required., supply of modular ventilating fan 200 mm (8inches) in pvc body., supply of wall mounted fan, 400 mm sweep, high speed, swing pull cord type, three speed pull cord etc., supply of s.p.mcb- 10 amps mcbs, c curve, working on 240v, 10ka as required., supply of s.p.mcb- 16 amps mcbs, c curve, working on suitable voltage, 10ka as required., supply of s.p.mcb- 20 amps mcbs, c curve, working on suitable voltage, 10ka as required., supply of s.p.mcb- 25 amps mcbs, c curve, working on suitable voltage, 10ka as required., supply of dp mcb 32 amps, c curve, working on suitable voltage, 10ka as required., supply of dp mcb- 40 amps, c curve, working on suitable voltage, 10ka as required., supply of dp mcb- 63 amps, c curve, working on suitable voltage, 10ka as required., supply of fp mcb- 32 amps mcbs / rccbs, c curve, working on suitable voltage, 10ka as required., supply of fp mcb- 40 amps mcbs / rccbs, c curve, working on suitable voltage, 10ka as required., supply of fp mcb- 63 amps mcbs / rccbs, c curve, working on suitable voltage, 10ka as required., supply of dp rccb 63 amps, 300 ma sensitivity, 415vs working on suitable voltage, 10ka as required., supply of fp rccb 63 amps, 300 ma sensitivity, 415vs working on suitable voltage, 10ka as required., providing of plastic trunking (cat no. 0104 22) without cover 105 mm x 50 mm of dlp plastic u-pvc trunking (make legrand) complete as required., providing of plastic trunking cover (cat no. 0105 22) suitable for 105 mm x 50 mm of dlp plastic u-pvc trunking (make legrand) complete as required., providing of separation (cat no. 0105 82) suitable for trunking size 105mmx50mm of dlp plastic u-pvc trunking (make legrand) complete as required., providing of body joint for aligning bases during installation (cat no. 0106 91) suitable for trunking size 105mmx50mm of dlp plastic u-pvc trunking (make legrand) complete as required., providing of internal angle adjusted from 80-100 angle suitable for trunking size 105mm x 50 mm (cat no. 0106 02) of dlp plastic u-pvc trunking (make legrand) complete as required., providing of external angle adjusted from 60-120 angle suitable for trunking size 105mm x 50 mm (cat no. 0106 22) of dlp plastic u-pvc trunking (make legrand) complete as required., providing of flat angle - 90 suitable for trunking size 105mm x 50 mm (cat no. 0107 85) of dlp plastic u-pvc trunking (make legrand) complete as required., providing of end caps suitable for trunking size 105mmx50mm (cat no. 107 02) of dlp plastic u-pvc trunking (make legrand) complete as required., providing of plastic trunking with cover & without central partition 32 mm x 20 mm (cat no. 0300 17) of dlp plastic u-pvc trunking (make legrand) complete as required., providing of end caps suitable for trunking size 32mmx20mm (cat no. 0312 09) of dlp plastic u-pvc trunking (make legrand) complete as required., providing of changeable flat angle suitable for trunking size 32mmx20mm (cat no. 0302 73) of dlp plastic u-pvc trunking (make legrand) complete as required., providing of changeable internal-external angle suitable for trunking size 32mmx20mm (cat no. 0302 71) of dlp plastic u-pvc trunking (make legrand) complete as required., supplying 1 or 2 module (cat no. 0109 92) modular base , cover plate & insulation unit dlp trunking (for 85 mm cover) etc. complete as required. (make legrand), supplying 3 module (cat no. 0109 93) modular base , cover plate & insulation unit dlp trunking (for 85 mm cover) etc. complete as required. (make legrand), supplying 4 module (cat no. 0109 94) modular base , cover plate & insulation unit dlp trunking (for 85 mm cover) etc. complete as required. (make legrand), supplying 6 module (cat no. 0109 96) modular base , cover plate & insulation unit dlp trunking (for 85 mm cover) etc. complete as required. (make legrand), supplying 6 amp. one way module switch (make legrand, cat no. 5734 00 ) modular base , cover plate & insulation unit dlp trunking (for 85 mm cover) etc. complete as required. (make legrand), supplying 20 amp. one way module switch (make legrand, cat no. 5734 10 ) modular base , cover plate & insulation unit dlp trunking (for 85 mm cover) etc. complete as required. (make legrand), supplying 25 amp. one way module switch (make legrand, cat no. 5734 17) modular base , cover plate & insulation unit dlp trunking (for 85 mm cover) etc. complete as required. (make legrand), supplying 6/16 amp. twin socket heavy duty (2 module) (make legrand, cat no. 5734 71) modular base , cover plate & insulation unit dlp trunking (for 85 mm cover) etc. complete as required. (make legrand), supply of 6 amp. 5 pin multi socket modular, similar to roma classic cat no. 21102 suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 6/16 a. 5 pin twin socket modular heavy duty, similar to roma classic cat no. 30828 suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 10 amp one way switch modular, similar to anchor rider cat no.21011 suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 16 amp one way switch modular, similar to anchor roma classic cat no. 21066 suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 25 amp one way switch modular, similar to anchor roma classic cat no. 22014 suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 10 amp bell push switch modular, similar to anchor roma classic cat no. 21044 suitable for working on 240v, single phase, 50 hz ac complete as required., supply of blanking plate, similar to roma classic cat no. 21598 suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 1 & 2 modular front plates with base frame similar to roma classic cat no. 30227wh suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 3 modular front plates with base frame similar to roma classic cat no.30238wh suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 4 modular front plates with base frame similar to roma classic cat no.30249wh suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 6 modular front plates with base frame similar to roma classic cat no.30250wh suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 8 modular front plates with base frame similar to roma classic cat no.30384wh suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 3 modular surface mounting plastic box modular base frame and cover similar to crabtree classic suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 6 modular surface mounting plastic box modular base frame and cover similar to crabtree classic suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 20a mini moduler mcb sp similar to roma classic cat no.98072 suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 25a mini moduler mcb sp similar to roma classic cat no.98073 suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 32a mini moduler mcb sp similar to roma classic cat no.98074 suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 100 watt 240 v, ac 50 hz. fan step regulator single modular, similar to roma classic cat no 22546 suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 100 watt 240 v, ac 50 hz. fan step reglator two modular, similar to roma classic cat no 21496 suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 3 pin plug top 5/6a, isi marked (crabtree cat no. ahlgxxw063 or similar) suitable for working on 240v, single phase, 50 hz ac complete as required., supply of 3 pin plug top 15/16a, isi marked(crabtree cat no. ahlgxxw163 or similar) suitable for working on 240v, single phase, 50 hz ac complete as required., 20 amp. indusrial ac plug & socket, sp&n enclosure with 2 pole and earh metal plug & socket for incorporating 20 a spn/dp mcb (make anchor roma category no. 98492 or similar)., supply of 80 watt high bay led lights suitable for operating on 230 v with life expectancy of min 50,000 burning hrs for leds and suitable built in/external led driver as per tender specifications & special conditions complete in all respect etc. as required., supply of constant current led driver of output power of 36watt suitable for existing led fitting of make-wipro., supply of constant current led driver of output power of 18 watt suitable for existing led fitting of make-wipro., supply of constant current led driver of output power of 12 watt suitable for existing led fitting of make-wipro.
Agency / Dept :
airports authority of india AAI
Due Date :
Aug 24, 2026 (16 days left)
Tender Value :
41.6L
View Documents
T18 Ref No : 16649028
Location : hyderabad , telangana
NEW TENDER
tender for protection cover for passenger emergency alarm pull box as per rdso drg no. rdso/cg/drg/23003 alt.01 or latest. note: velcro hook and velcro loop (self adhesive) of required length to be supplied along with each protection cover, protection cover for passenger emergency alarm pull box as per rdso drg no. rdso/cg/drg/23003 alt. 01 or latest. note: velcro hook and velcro loop (self adhesive) of required length to be supplied along with each protec tion cover - warranty period: 30 months after the date of delivery
Agency / Dept :
south central railway SCR
Due Date :
Sep 09, 2026 (32 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16638425
Location : sonitpur , assam
Source : GEM Tenders
NEW TENDER
tender for basketball court construction , general features , base of basketball ground , pavement layers , drainage system with sump , led flood light including electrical work and installation , 12 ft high all round fencing. , sitting arrangement for players. , fiber glass basketball system,dunk board, poles, rings and net , electronic scoreboard., synthetic basketball court, overall court area 100 ft x 50 ft playing area 94 ft x 50 ft fiba or bfi standard, providing and fixing basketball poles with 20 mm acrylic fiber backboard, including dunking ring and net. standard quality 6 inch round pipe of 3mm thickness including installation., excavation leveling and compacting of the existing surface after dismantling and removal of existing cement concrete court. 100 mm wbm. thickness 100 mm, roller capacity of 8 to 10 tons, bitumen grade 60 to 70. 12 mm to 20 mm bm carpet. 15 mm seal coat, bitumen grade 60 to 70. leveling layer 15 mm. installation and line marking should be included., acrylic color coat, fine cushion layers, heavy cushion layers, resurfacer, 40 mm bituminous concrete. 50 mm dense bituminous macadam. 100 mm wbm. 150 mm granular sub base. compacted earth., covered drainage with sump. a side drain shall be provided on all sides with following specifications, providing and laying cement concrete with proper sloping. support wall. brickwork with first class bricks. provision of paint finish with one primer coat and additional coats., 06 ms poles with safety pads with 30 ft height. 4 x 30 ft poles with led floodlights minimum 200 lux illumination. 04 lights per pole total 16 led. power control and distribution penal box and 2.5 sqmm copper cables from mcb box to lights. a dedicated earthing system for the entire electrical installation. ip66 fittings with surge protection and 5 year warranty, 1. 2 inch wire mesh fencing fist grade gi chain link fencing. circumference of fencing around basketball court. fencing area 100ft l x 10ft h x 2 sides and 50ft l x 12ft h x 2 sides total 310ft., 04 x stainless steel seating arrangement for the player of two team three players per seat if length 6ft, dimensions. 6 ft x 4 ft led digital display. score, timer, shot clock, fouls, period indications. wireless and wired controlled. built in buzzer. 220-240v ac. indoor and outdoor ip65
Agency / Dept :
integrated defence staff IDS
Due Date :
Aug 20, 2026 (12 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16640429
Location : kargil , ladakh
Source : GEM Tenders
NEW TENDER
tender for tin sheet size 3.5 ft x 10 ft , iron angle size thickness 6 mm 2.5 inch x 2.5 inch , drill machine with accessory kit , angle grinder with 900w motor 100mm disc m10 thread 2 way switch restart protection for heavy duty use includes wrench box , metal 4 inch cut off wheel set white pack of 10 , square pipe size thickness 5 mm 1.5 inch x 1.5 inch , roofing screws with washer length 50 mm hex head self drilling , roofing screws with washer length 25 mm hex head self drilling , 103 pcs drill bits accessory set versatile drilling screw driving kit organized carry case, procurement of trg shed items, tin sheet size 3.5 ft x 10 ft, iron angle size thickness 6 mm 2.5 inch x 2.5 inch, drill machine with accessory kit, angle grinder with 900w motor 100mm disc m10 thread 2 way switch restart protection for heavy duty use includes wrench box, metal 4 inch cut off wheel set white pack of 10, square pipe size thickness 5 mm 1.5 inch x 1.5 inch, roofing screws with washer length 50 mm hex head self drilling, roofing screws with washer length 25 mm hex head self drilling, 103 pcs drill bits accessory set versatile drilling screw driving kit organized carry case
Agency / Dept :
indian army
Due Date :
Aug 12, 2026 (4 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16640071
Location : banda , uttar pradesh
Source : GEM Tenders
NEW TENDER
tender for supply and fixing of 9 mtr gi octagonal pole of approved make top dia 70mm bottom dia 155 mm and base plate 12mm thik having 3mm thikness with double arm bracket 1 mtr length each on rcc foundation , supply and laying of aluminium conductor pvcinsulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand , supply and fixing of brass nickle plated compression gland for pvc insulated and armoured served sheathed underground cable including rubber ring etc complete in all respect , supply and burying of 40mm dia x 4 and half metres long gi pipe vertically for earthing having 12mm dia holes spaced 75mm apart drilled up to 2 metre from the , supply and fixing of factory wired integral led flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200watt confirming to ip 66 protection , supply and fixing following capacity of automaticstreet light cubicle control panel , supply and wiring of submain with two number 2and half sq mm frlsh pvc insulated 1100 v grade multistrand single core copper conductor cable, supply and fixing of 9 mtr gi octagonal pole of approved make top dia 70mm bottom dia 155 mm and base plate 12mm thik having 3mm thikness with double arm bracket 1 mtr length each on rcc foundationincluding the cost of foundation foundation bolts excavation and back filling and required tp completeein all respect, supply and laying of aluminium conductor pvcinsulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable un shall be fixed on m.s. clamps etc. of suitable size or as directed by the engineer-incharge complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.16 sq. mm 4 core, supply and fixing of brass nickle plated compression gland for pvc insulated & armoured served sheathed underground cable including rubber ring etc. complete in all respect. the armouring of the cable shall be properly connected with the earth as per direction of engineer- incharge., supply and burying of 40mm dia x 4.5 metres long g.i. pipe vertically for earthing having 12mm dia. holes spaced 75mm apart drilled up to 2 metre from the bottomcomplete with earthing lead of no. 6 to 8swg gi wire in g.i. pipe up to appron and from appron to switch board the cost of g.i. wire and pipe will be extra upto switch board 30cm square c.i. box with hinged cover masonary enclosure funnel at top alternate layers of charcoal coke and salt at least 150mm thick alround etc. as per directions of engineer-in-charge complete in all respects as per drawing, supply and fixing of factory wired integral led flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200watt confirming to ip 66 protection complete in all respect, supply and fixing following capacity of automaticstreet light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch tso 100 series with contactors hrc fuses isolating switch metering instrument & instrument box with cts etc. in case of tpn complete in all respect., supply and wiring of submain with two number 2.5 sq.mm. frlsh pvc insulated 1100 v grade multistrand single core copper conductor cable in 20 mm dia. heavy guage rigid steel conduit on surface with one number 14 swg copper earth continuity wire etc complete in all respect.
Agency / Dept :
district rural development agency DRDA
Due Date :
Aug 17, 2026 (9 days left)
Tender Value :
6L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16640089
Location : jammu , jammu & kashmir
Source : GEM Tenders
NEW TENDER
tender for supply laying testing and commissioning ug cable xlpe , material and labour for cable jointing kit end joint , excavating in trenches in hard dense soft soil , removing excavated material to a distance , returing filling in including spreading , supply and laying of dwc double wall , material and labour for cutting through , supply and fixing gi tubing medium grade , material and labour for earthing complete , supply and fixing in replacement mccb , supply and fixing change over switchs , material and labour for three phase aluminum, repair and maintenance of aluminum cable and including connected items at charlie hill ops location, supply laying testing and commissioning ug cable xlpe insulated screened pvc bedded galvanized steel strip or wire armoured electric power cables heavy duty 1100 volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core including taking down old cable with suitable thimbles from trench complete. make polycab paragon gloster, material and labour for cable jointing kit end joint for 1.1 kv earthed grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core xlpe armoured aluminium conductor cable of size 70 sqmm to 95 sqmm., excavating in trenches in hard dense soft soil n exc 1.5 m wide and n exc 1.5 m in depth for foundation of poles trenches for laying of cable or for shafts wells cesspits manholes pier holes etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed., removing excavated material to a distance not exceeding 50 mtr and deposting where directed at a level not exc 1.5 mtr above the starting point, returing filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm each all as required and directed., supply and laying of dwc double wall corrugated hdpe pipe isi marked is 16205 part-ii of outer dia of 93 mm and inner dia 80 mm with smooth internal and profiled external surface for non pressure under ground cable including all connected accessories like coupler o ring etc for protection cable complete all as specified and as directed. make rex polyextrusion genimi, material and labour for cutting through existing road surfaces pcc pcc tiles etc and making trench rm of minimum 500mm wide 100cm in depth along the cross section of road for laying of pipes or ug cables including returning filing in well ramming and removal of surplus soil to a distance not exc. 50 mtrs and repairs to road surfaces to match with existing specification after laying the pipes cable etc. all as specified and directed, supply and fixing gi tubing medium grade tubes 80 mm bore including taking down old unsv one complete all as specified and directed., material and labour for earthing complete with galvanized steel earth plate electrode 60 x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below gl with top edge of the plate not less than 1.5 mtr below normal gl and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead galvanised iron 4mm dia wire by means of bolts nuts check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to db and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore gi light grade with funnel and wire mesh including all necessary excavation and earth work pcc chamber in cement concrete 1 ratio 3 ratio 6 type c2 and rcc cover and all as shown in electrical plate no 3 of mes schedule pt i of 2009., supply and fixing in replacement mccb tpn 100 amps 415 volts complete incl taking down old unserviceable make legrand havells l and t indoasian hpl, supply and fixing change over switchs on load 63 amps 4 pole including taking down old unsv one complete all as specified and directed., material and labour for three phase aluminum rectangle bus bar box 4 way of 150 amps rating complete all as specified and as directed
Agency / Dept :
indian army
Due Date :
Aug 19, 2026 (11 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16640097
Location : jammu , jammu & kashmir
Source : GEM Tenders
NEW TENDER
tender for material and labour in replacement of crca sheet , material and labour in replacement of crca sheet out door , supply and fixing lt cable end terminatio , supply and fixing on wall pvc insulated , excavation in trenches not exceeding , returning filling in including spreading levelling , removing excavated material not exceeding , supply laying and testing in replcement of cable xlpe , supply laying and testing in replcement of cable xlpe insulated , supply laying and testing in replcement of cable xlpe insulated screened , supply and laying and fixing in replacement double wall , ditto all as per items no 11 but of size 77mm outer dia, repair of power supply for rice steam boiler and standby supply panel for chapatti, material and labour in replacement of crca sheet out door feeder box for aluminuam bus bar cap 300 amp 3 phase 4 wire 415 volts with porcelain insulator weather and vermin proof with ip 54 protection made out of 3.15 mm crca sheet duly painted with two coats of synthetic enameld paint over a red oxide primer type both side openable from front side and back having locking arrangement on both sides mounted over 50x50x6 mm angle iron stand at the bottom of height not less than 45 cm above ground level and not less than 30 cm in ground floor mounted duly grouted in pcc 1 ratio 3 ratio 6 type c1 factory made duly powder coated including taking out of old unservisable panel and mccb 200amp 25ka four pole x 01 nos as a incomer, material and labour in replacement of crca sheet out door feeder box for aluminuam bus bar cap 400 amp 3 phase 4 wire 415 volts with porcelain insulator weather and vermin proof with ip 54 protection, made out of 3.15 mm crca sheet duly painted with two coats of synthetic enameld paint over a red oxide primer type both side openable, from front side & back having, locking arrangement on both sides mounted over 50x50x6 mm angle iron stand at the bottom of height not less than 45 cm above ground level and not less than 30 cm in ground floor mounted duly grouted in pcc 1 ratio 3 ratio 6 type c1 factory made duly powder coated including taking out of old unservisable panel and mccb 250amp 25ka four pole x 01 nos as a incomer, supply and fixing lt cable end termination joining kit heat shrinkabale complete with jointing materials suitable for lt armoured cable 3.5 core of size 50 to 95 sqmm all as directed make 3m denson m-seal, supply and fixing on wall pvc insulated sheathed service wire twin core 10 sqmm aluminium multistranded conductor 1100 volts grade incl taking down old unserviceable one complete with fixing arrangement clip., excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in any type of soil for laying of lt ug cables complete., returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm thick in hard dense soil, removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, supply laying and testing in replcement of cable xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cable lt 1100 volt grade with stranded aluminium conductor of size 95 sqmm 3.5 core complete all as specified and directed., supply laying and testing in replcement of cable xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cable lt 1100 volt grade with stranded aluminium conductor of size 70 sqmm 3.5 core., supply laying and testing in replcement of cable xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cable lt 1100 volt grade with stranded aluminium conductor of size 16 sq mm 4 core., supply and laying and fixing in replacement double wall corrugated dwc pipes made of high density polythyline hdpe with all accessories i.e. all type of joints sockets elbows bends and end caps etc. all as specified and directed by engr in charge of size 50mm outer dia and 38mm inner dia, ditto all as per items no 11 but of size 77mm outer dia and 63mm inner dia
Agency / Dept :
indian army
Due Date :
Aug 19, 2026 (11 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16639046
Location : coimbatore , tamil nadu
Source : GEM Tenders
NEW TENDER
tender for item 1 , item 2 , item 3 , item 4 , item 5 , item 6 , item 7 , item 8 , item 9 , item 10 , item 11 , item 12 , item 13 , item 14 , item 15 , item 16 , item 17 , item 18 , item 19 , item 20 , item 21 , item 22 , item 23 , item 24 , item 25 , item 26 , item 27 , item 28 , item 29 , item 30 , item 31 , item 32 , item 33 , item 34 , item 35 , item 36 , item 37 , item 38 , item 39 , item 40 , item 41 , item 42 , item 43 , item 44 , item 45 , item 46 , item 47 , item 48 , item 49 , item 50 , item 51 , item 52 , item 53 , item 54 , item 55 , item 56 , item 57 , item 58 , item 59 , item 60 , item 61 , item 62 , item 63 , item 64 , item 65 , item 66 , item 67 , item 68 , item 69 , item 70 , item 71 , item 72 , item 73 , item 74 , item 75 , item 76 , item 77 , item 78 , item 79 , item 80 , item 81 , item 82 , item 83 , item 84 , item 85 , item 86 , item 87 , item 88 , item 89 , item 90 , item 91 , item 92 , item 93 , item 94 , item 95 , item 96 , item 97 , item 98 , item 99 , item 100 , item 101 , item 102 , item 103 , item 104 , item 105 , item 106 , item 107 , item 108 , item 109 , item 110 , item 111 , item 112 , item 113 , item 114 , item 115 , item 116 , item 117 , item 118 , item 119 , item 120, supply of electrical spares, 1600a main moving contacts, cat ref. no. 16d / 16n, movmain 16d, for c&s make acb aha series, 2500 a main isolating contacts (jaw contacts), cat ref. no. 25d / 25n-30s, cs-mic-25d, set of 2, for c&s make acb aha series, 1600 a main isolating contacts (jaw contacts), cat ref. no. 16d / 16n, cs-mic-16d, set of 2, for c&s make acb aha series, 4pole 1600 a arcing contacts, , cat. ref. no. 16d / 16n, cs-arccont-16d, (set of 1 no. fixed 1 no. moving), for c&s make acb aha series, 2500 a acb pole separator (barrier), cat no. pole-septr-20-25, for c&s make acb aha series, 36 way set of three contact block on acb side & six block on cradle side, cat. ref. no. 6d-16d/06n-20s, 4p, cs-aih-3-116 (4p), for c&s make acb aha series, 36 way set of three contact block on acb side & six block on cradle side, cat. ref. no. 20d-25d/25n-30s, 4p, cs-aih-3-220 (4p), current transfomer 1600/0.2 a, cat. ref. no. cs-wmct-164, cs-atbwm-160, for c&s make acb aha series, current transformer 2500/0.2 a, cat. ref. no. cs-wmct-164, cs-atbwm-225 for c&s make acb aha series, shunt trip coil cat. ref. no. 6d-16d /08n 208 & 20d -40d/30s-40s (aha), cs-avh-s-220-xx for c&s make acb aha series, closing coil cat. ref. no. 6d-16d /08n-20s ( aha ) & 20d -40d/30s-41s (aha), cs-avh-c-220-xx for c&s make acb aha series, uv coil ct. ref. no. 6d-16d/06n-20s, cs-auh-v-a-xx for c&s make acb aha series, uv coil cat. ref. no. 20d-40d/25n-40s / 50c-60c , cs-auh-v-b-xx, for c&s make acb aha series, 1600a , 4p frp shutter assebly 6d-16d / 06n-16n, 4 pole, cat. ref. no. ash-1 (4p), for c&s make acb aha series, 2500a , 4p frp shutter assebly 20d-25d/30s, 4 pole cat. ref. no. ash-2 (4p), for c&s make acb aha series, auxillary switch 14 way (7no+7nc) cat. ref. no. 6d-16d/06n-20s cs-axh-7a7b-116, for c&s make acb aha series, auxillary switch 14 way cat. ref. no. 20d-40d/25n-40s / 50c-60c cs-axh-7a7b-22 0, for c&s make acb aha series, arc chutes cat. ref. no. 25d/30s, cs-arccht-25d, for c&s make acb aha series, arc chutes cat. ref. no. 6d-16d/06n-20n, cs-arccht-06d-16d, for c&s make acb aha series, 1600a/2500a closing latch for c&s make acb aha series, micro switch for motor cut off 6d-40d/06n-40s /50c-60c, model- microsw, for c&s make acb aha series, 2500 a trip shaft, for c&s make acb aha series, 1600 a trip shaft, for c&s make acb aha series, supply of c&s make acb, ah-25d 4p edo with micropro-5.1t with complete set, communication module for micropro 4.1/5.1 release. model- cspscm-micropro for c&s make acb aha series, c-power acb 1000a uv coil, 240v, 50hz ac for l&t make, model- sl92720b000, c-power acb 1000a shunt coil, 240v, 50hz ac for l&t make, model- sl927180b00, c-power acb 1000a closing coil, 240v, 50hz ac for l&t make, supply of 3 phase multi function meter rishi master 3440 with support rs port 485., 100 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse1m125atm4p-x., 125 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse1m125atm4p-x, 160 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse2m250atm4p-x, 200 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse2m250atm4p-x, 63 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv510345., 125 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv516342, 160 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv516343, 200 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv525342, 250a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv525343, 400a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv540309, 10kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4102j040 complete as required., 20kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4202j040 complete as required., 25 kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4252j040 complete as required., cylindrical hrc fuse links type hf of rating 63 amps, make- - l&t, cat no- - sf90159, or equivalent, cylindrical hrc fuse links type hf of rating 40 amps, make- - l&t, cat no- - sf90143, or equivalent, cylindrical hrc fuse links type hf of rating 32 amps, make- - l&t, cat no- - sf90142, or equivalent, cylindrical hrc fuse links type hf of rating 16 amps, make- - l&t, cat no- - sf90150, or equivalent, off set clip in type fuse links type hbc of rating 2 amps, type- cns, iec 269,, off set clip in type fuse links type hbc of rating 4 amps, type- cns, iec 269,, off set clip in type fuse links type hbc of rating 6 amps, type- cns, iec 269,, 63a on-load changeover switch (manual) in sheet steel enclosure, suitable for switching between two power sources (mains and standby supply), with ac-23a utilization category, 4 pole, suitable for 415v, 50hz, three-phase system., supply of 32a motor protection circuit breaker (mpcb), suitable for three-phase motor protection, with adjustable thermal overload and magnetic short-circuit protection, conforming to relevant is/iec standards., 1.5 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (fr-lsh) grade wires suitable for domestic and industrial purpose (each - 90 mtrs. coil), 2.5 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (frls) grade wires suitable for domestic and industrial purpose (each - 90 mtrs. coil), 4 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (fr-lsh) grade wires suitable for domestic and industrial purpose(each - 90 mtrs. coil), 2 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment)-(each - 100 mtrs. coil), 3 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 3 core 2.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 3 core 4 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment)- (each - 100 mtrs. coil), 8 core 1.0 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 4 core 2.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 6 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), category 6 (cat6) utp lan cable, 4-pair, 23 awg electrolytic grade solid annealed bare copper conductor, hdpe insulated, overall pvc/lszh sheathed, conforming to tia/eia-568-c.2 and iso/iec 11801, suitable for data transmission up to 1 gbps and 250 mhz frequency, complete as required. (each - 100 mtrs. coil), miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. sp mcb, 16 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. dp mcb, 25 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. dp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. tp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp mcb, 63a, c curve, isolator having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp isolator, 100a, 5 pin, 32a, 220-440vac, industrial panel socket with plug ip44 waterproof plug socket male female connector (plug & socket), 6 amps modular one way switch of make- - legrand, model- - myrius, cat no- - 6792 00 or equivalent, 16 amps modular one way switch of make- - legrand, model- - myrius, cat no- - 6792 09 or equivalent, 6 amps modular two way switch of make- - legrand, model- - myrius, cat no- - 6792 01 or equivalent, 6 amps modular bell switch of make- - legrand, model- - myrius, cat no- - 6792 20 or equivalent, 6 amps modular socket of make- - legrand, model- - myrius, cat no- - 6792 35 or equivalent, 16 amps modular socket of make- - legrand, model- - myrius, cat no- - 6792 30 or equivalent, blanking plate of make- - legrand, model- - myrius, cat no- - 6792 76 or equivalent, modular 2 module electronic fan regulator of make- - legrand, model- - myrius, cat no- - 6792 39 or equivalent, 2 module modular pvc surface mounting box with base cover plate, 3 module modular pvc surface mounting box with base cover plate, 4 module modular pvc surface mounting box with base cover plate, 6 module modular pvc surface mounting box with base cover plate, 8 module modular pvc surface mounting box with base cover plate, 12 module modular pvc surface mounting box with base cover plate, 6/16amp combined switch and socket, 3 in one, universal s.s. combined, with safety shutter & pvc gang box., dingdong doorbell, electronic suitable for operation in 220v ac supply, havells/crompton or equilant make, 20 w, 1200 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications. thd lessthan10%, 36w, 1200 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications. thd lessthan10%, 10w, 600 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications., 10w min, b22 led bulb made up of integrated electronic driver along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications., 10w led type bulkhead luminaire with cool white colour temperature, efficiency of led light fitting minimum 110 lm/w, pf equal to 0.95 or more, thd should be less than 10% , minimum ip 65/66 protection with housing material made of high pressure die cast aluminium /standard alloy suitable for outdoor application suitable for operation on 230 v+/- 10%, 50hz, single phase ac supply and as per technical specification with all its accessories, driver etc. as complete., led flood light led luminaire in die-cast aluminium housing, ip66 flood light suitable for operating on voltage range (120 - 270v ac) single phase, 50hz supply of following rating. rating - 100w, led flood light led luminaire in die-cast aluminium housing, ip66 flood light suitable for operating on voltage range (120 - 270v ac) single phase, 50hz supply of following rating. rating - 200w, led flood light luminaire with secondary optical lens having minimum output of 120 lm/watt and rated power not exceeding 250 watts with 5 years warranty designed with powder coated pressure die cast aluminium housing, frame, ms mounting bracket, integral driver with surge protection, heat resistant toughned glass, conforming to ip 65/ip66 & ik 07 protection etc. complete as required. (led & power drive should meet the aai specifications. rating - 250 w led -bajaj praze f 300l wh nb-a5 tg sd model or equilanet, supply of 45w led type streetlight pole arm mountable luminaire with 5700k colour temperature, efficiency of led light fitting minimum 110lm/w, pf equal to 0.95 or more, thd should be less than 10% , minimum ip 65/66 protection with housing material made of high pressure die cast aluminium /standard alloy suitable for outdoor application with manufacturer name/logo embossed in the housing body or on aluminium plate etc. complete as required, all prewired up to terminal block and suitable for operation on 230 v+/- 10%, 50hz, single phase ac supply and as per technical specification with all its accessories, driver etc. as complete., supply of 12w light dome (white in colour) for garden lights, make crompton solar eclipse or suitable for existing pole., supply of 7w led spot light for lift cabin make- philips, model- starfit next or equivalent, supply of 5w, 1 ft led batten light, led type twin dome red aviation obstacle light fixture low intensity type b as per icao annex-14 , ip 66, operating on 230v ac 50 or 60hz input supply (operating band of 90v to 260v ac) direct mounting type complete as required as per the technical specifications., 1200 mm sweep, 5 star rated, bldc motor ceiling fan suitable for operating on 230 v ac etc., 1400 mm sweep, 5 star rated, ceiling fan suitable for operating on 230 v ac etc., 250 mm sweep exhaust fan with pvc body suitable for operation on 230v single phase ac supply 250 mm sweep,, air circulator, bldc pedestal type, 600 mm sweep, having adjustable height feature, aluminium blades, oscillating feature, suitable for operation in 230v ac supply., 400mm sweep wall fan, 5 star rated with 3 nos. of plastic blade having pull cord control feature & vertical adjustable tilt mechanism, oscillation feature, copper winding motor suitable for operation in 230v ac supply, supply of 2-inch size ball type foot valve, made of heavy-duty ci body with ss strainer and rubber/epdm sealing, suitable for water application, supply of 2-inch (dn50) inline digital water flow meter, suitable for measurement of potable water and sewage water flow, complete with sensor, transmitter, and all necessary accessories, as required., supply of 4-inch inline water flow meter (electromagnetic type), suitable for bulk water measurement, supply of 2-inch flow meter suitable for sewage treatment plant (stp) applications, preferably electromagnetic type, corrosion-resistant, with digital indicator, ip68 protection (sensor), complete with cables and accessories. make- frehing, fmf 2040 series, size- 80mm, supply of smc (sheet moulded compound) junction box of size 300 x 200 x 105 mm, suitable for outdoor pole mounting in street lighting applications, made of high-strength frp or smc material, weatherproof, uv resistant, fire retardant (ul94 v 0), with hinged door (right side), complete with gasket, locking arrangement, and provision for cable entry, suitable for 3-phase or 4-core systems, as per sintex model gsjb 3020(1) or approved equivalent, including all accessories required for proper installation., supply of 12 kv, 3.15 a hrc cartridge fuse (pt fuse) conforming to iec 60282 1, suitable for ht panels, item. pt fuse 11kv 3.15a 12abcna 3.15a bussman (set of 3 nos for r y b phases)., supply of portable high-pressure water jet cleaning system suitable for solar pv module cleaning, comprising motorized pressure pump power- 1800w, pressure- 120 bar, flow rate- 6l per min, voltage- 220v, 50hz, spray gun, high-pressure hose, and necessary accessories., supply of solar photovoltaic (pv) modules of capacity 335 wp, based on crystalline silicon technology with multi-crystalline cells, having a rated power output of 335 wp (plus or minus 2 percenet). the module dimensions shall be approximately 1958 mm x 987 mm, with a weight of around 21.2 kg.m make- renewsys india pvt ltd, model. deserv 3m6h 335 or equivalent, conforming to relevant iec standards (iec 61215 or iec 61730), complete in all respects as per specifications and as directed by the engineer-in-charge., supply of portable digital lux level meter suitable for measurement of illumination levels in lux (lx) and foot-candle (fc), for indoor and outdoor lighting assessment applications. the instrument shall have a measuring range up to at least 200,000 lux with high accuracy of plus or minus 3 percenet or better, and shall be suitable for measurement of light from various sources such as led, fluorescent, metal halide, high-pressure sodium, and incandescent lamps. make- fluke, model- fluke 941 light meter, supply of auto day/night on & off photocell, ldr sensor switch for lighting, water proof, suitable for outdoor usage, 230 v ac, 10a supply complete as required. - make - geltech model- gt-ld308 or equialant., supply of led landing h light suitable to replace existing landing h lights operated at 230v 50hz direct input supply. the fitting housing meets ip-66 dust & moisture proof. designed in accordance with icao aerodrome standards-aerodrome design & operators manual for landing direction indicator landing-t lamp advisory with bas fixing pipe flange. light output colour - white., catalog code- ltl-5w-ui, supply of 200w 6.6a bi-pin halogen lamps. (cat no. 64386 osram or equivalent) as required., supply of single phase preventer (phase failure relay) suitable for protection of 3-phase motors against single phasing, phase reversal, and voltage imbalance. the relay shall operate on 415 v ac, 3-phase, 50 hz supply and shall have built-in phase sequence correction and automatic reset feature. make- selec, model- sppa2m2, supply of 50mm dia dwc hdpe pipe isi marked, acb mechanical interlock set l&t make omega model, suitable exisitng panel, supply of digital hour meter (time totaliser), model ltc9a of selec or approved make list of aai, having 7 and half digit lcd display, suitable for cumulative time measurement with voltage or contact input (24 to 260v ac or dc), panel mounting type, battery powered with memory retention, measuring range up to 199999.99 hours, accuracy plus or minus 0.05 percent, with front or reset facility, complete as required.
Agency / Dept :
airports authority of india AAI
Due Date :
Aug 28, 2026 (20 days left)
Tender Value :
49.71L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16590005
Location : varanasi , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for gi protection box
Agency / Dept :
central ground water board CGWB
Due Date :
Aug 25, 2026 (17 days left)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Protection Box. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Protection Box sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Protection Box Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Protection Box, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Protection Box Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Protection Box Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Protection Box.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Protection Box depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Protection Box Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Protection Box bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Protection Box. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Protection Box, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Protection Box, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Protection Box?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Protection Box tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Protection Box?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Protection Box, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Protection Box is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All