sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

10Latest Pneumatic rivet hammer Tenders List

Latest Pneumatic rivet hammer Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Pneumatic rivet hammer tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Pneumatic rivet hammer tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Pneumatic rivet hammer Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Pneumatic rivet hammer tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Pneumatic rivet hammer Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Pneumatic rivet hammer Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Pneumatic rivet hammer Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Pneumatic rivet hammer tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Pneumatic rivet hammer Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Pneumatic rivet hammer sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Pneumatic rivet hammer tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Pneumatic rivet hammer tenders.

Is EMD mandatory for all Pneumatic rivet hammer tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Pneumatic rivet hammer work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Pneumatic rivet hammer tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Pneumatic rivet hammer Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17021778
Location : vijayawada , andhra pradesh
NEW TENDER
tender for set of spare parts for pneumatic rivet buster (cutter) pt811, rivet hammer cp60 & 1/2 union connecting nipple (as per enclosed drawing): (1) valve case complete part no: cat00z9331863 for rivet buster (rivet cutter), model: cat3010, equivalent and suitable to pt811 in all respect. (2) valve case complete part no: cat00z9476840 for rivet hammer, model: cat3007, equivalent and suitable to cp 60 in all respect. (3) 1/2 union connecting nipple complete with mild steel nipple, mild steel hex nut and oil resistant neoprene rubber washer (ru33e), suitable for compressed air service, conforming to scr drawing no. a4-0888. make/model: chicago pneumatic/atlas copco/ingersoll rand, apt tools & machinery india pvt. ltd/aerobulls/bullscat or equivalent make, subject to compatibility and suitability for pt811 , cp-60 & 1/2 union connecting nipple., set of spare parts for pneumatic rivet buster (cutter) pt811, rivet hammer cp60 & 1/2 uni on connecting nipple (as per enclosed drawing): (1) valve case complete part no: cat00z9331863 for r ivet buster (rivet cutter), model: cat3010, equivalent and suitable to pt811 in all respect. (2) valve case complete part no: cat00z9476840 for rivet hammer, model: cat3007, equivalent and suitable to cp 60 i n all respect. (3) 1/2 union connecting nipple complete with mild steel nipple, mild steel hex nut and oil resistant neoprene rubber washer (ru33e), suitable for compressed air service, conforming to scr drawi ng no. a4-0888. make/model: chicago pneumatic/atlas copco/ingersoll rand, apt tools & machinery india p vt. ltd/aerobulls/bullscat or equivalent make, subject to compatibility and suitability for pt811 , cp-60 & 1/ 2 union connecting nipple. - warranty period: 6 months after the date of delivery -quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs
Agency / Dept :
south central railway SCR
Due Date :
Sep 18, 2026 (18 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16872213
Location : tawang , arunachal pradesh
Source : GEM Tenders
LIVE TENDER
tender for masonry carpentry and general construction tools - crow bar heavy duty big size , mason trowel 4 inch steel with handle , mason trowel 5 inch steel with handle , mason trowel 6 inch steel with handle , mason trowel 8 inch steel with handle , mason trowel 9 inch steel with handle , plumb bob , transparent water level pipe 10 mm , mortar pan tasla 16 inch , stone breaking hammer 2 kg , mason thread cotton , mason thread nylon , spirit level 12 inch steel body , tape steel 2 metre steel case , tape steel 3 metre steel case , tape steel 15 metre steel case , hammer stone breaking 1 kg , wheel barrow single wheel , spare wheel for wheel barrow cast iron with solid rubber tyre and double ball bearing , dah iron 12 inch with handle , rammer earth 5 kg , earth rammer 14 lbs with wooden handle , folding entrenching shovel military specification , hammer stone dressing 1 kg , felling axe 2 kg without handle , hammer chisel face with handle 6 kg , mason hammer with chisel 850 gram , mason hammer chisel type , cordless rotary hammer drill 18 volt sds plus , electric planer for carpenter nput power 650 watt to 750 watt. operating voltage 220 volt to 240 volt ac 50 hz. no load speed 15000 rpm to 17000 rpm , hand tool kit for carpenter , carpenter screw driver 18 inch , carborundum stone 6 inch x 2 inch x 1 inch , blade for jack plane 2 inch , carpenter hand drill machine , electric jack planer , electric circular saw 12 inch , electric jack plane , gurmala steel 9 inch to 12 inch , hacksaw frame 12 inch , raker 10 to 12 prong , electric circular saw with spare blade , raker 12 prong with wooden handle , hand operated bitumen sprayer can , sledge hammer 2 kg without handle , sledge hammer 5 kg to 6 kg without handle , stone breaking hammer 6 kg , stone dressing chisel half inch and three fourth inch , steel measuring tape 5 metre fibre case , steel measuring tape 15 metre fibre case , steel measuring tape 30 metre fibre case , hand saw 12 inch , hand saw 20 inch , carpenter chisel 1 inch , carpenter chisel 2 inch , auger eyed half inch , spirit level 8 inch pvc body , spirit level 12 inch pvc body , spirit level 18 inch pvc body , spirit level 24 inch pvc body , spirit level 18 inch steel body , spirit level 24 inch steel body, octagonal crow bar conforming to is 704 latest. material high carbon steel. length 1650 mm. diameter at hammer end 30 mm. nominal weight 11 kg. heat treated and forged. one chisel end and one hammer end. black oxide finish. make equivalent to tata or reputed manufacturer., conforming to is 6013. blade size 4 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 5 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 6 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 8 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 9 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., material forged steel or brass. weight 200/500 gram. precision machined pointed tip. complete with 2 metre nylon thread. corrosion resistant finish. suitable for masonry alignment., transparent flexible pvc water tube. internal diameter 10 mm. wall thickness 2 mm minimum. uv resistant. kink resistant. smooth inner surface. roll length 30 metre minimum., virgin hdpe or pp plastic. diameter 16 inch. capacity 18 to 20 litre. weight 700 gram minimum. heavy duty. unbreakable. crack resistant. smooth non stick inner surface. uv stabilized., head weight 2 kg. forged high carbon steel head. heat treated. face hardness 50 to 55 hrc. handle fiberglass or seasoned hardwood. handle length 800 to 900 mm. anti slip rubber grip. heavy duty construction. manufacturer iso 9001 certified., construction 56 tex x 3 x 3. material 100 percent cotton. linear density 560 gram per 1000 metre minimum. breaking load 78 newton minimum. ball weight 200 gram minimum. uniform twist. high strength. suitable for masonry line marking., material 100 percent nylon multifilament. diameter 1.5 mm minimum. breaking strength 100 newton minimum. ball weight 200 gram minimum. high tensile strength. abrasion resistant. water resistant. suitable for masonry alignment and layout work., non magnetic type. body material heavy duty steel. length 12 inch. accuracy 0.5 mm per metre or better. tube thickness 1.25 mm minimum. liquid ethyl ether or industrial methylated spirit. width 50 mm. height 20 mm. weight 165 gram minimum. warranty 1 year, measuring length 2 metre. blade material stainless steel. case material steel. blade width 16 mm minimum. blade thickness 0.10 mm minimum. lock button. graduation in mm and cm. accuracy class ii., measuring length 3 metre. blade material stainless steel. case material steel. blade width 16 mm minimum. blade thickness 0.10 mm minimum. lock button. graduation in mm and cm. accuracy class ii., measuring length 15 metre. blade material stainless steel. steel closed case. blade width 12 mm minimum. blade thickness 0.10 mm minimum. folding rewind handle. graduation in mm and cm. accuracy class ii., head weight 1 kg. forged high carbon steel head. heat treated. hardness 50 to 55 hrc. double face. fiberglass or hardwood handle. handle length 300 mm to 350 mm. anti slip grip. heavy duty construction., capacity 90 litre minimum. tray material pressed mild steel. tray thickness 1.2 mm minimum. frame heavy duty mild steel tubular construction. wheel diameter 380 mm minimum. pneumatic rubber tyre with steel rim. load capacity 150 kg minimum. powder coated finish., wheel diameter 380 mm minimum. cast iron rim. solid rubber tyre. double ball bearing. axle bore 20 mm. heavy duty construction. suitable for standard wheel barrow., blade length 12 inch. blade material drop forged high carbon steel. blade thickness 4 mm minimum. heat treated. cutting edge hardened. full tang construction. hardwood handle with steel rivets. overall length 450 mm minimum. heavy duty construction, head weight 5 kg. rammer head made of cast iron or forged steel. base size 200 mm x 200 mm minimum. head height 100 mm minimum. hardwood seasoned wooden handle. handle length 1200 mm minimum. heavy duty construction suitable for earth compaction., rammer weight 14 lbs. head made of cast iron or forged steel. base size 200 mm x 200 mm minimum. heat treated. seasoned hardwood handle. handle length 1200 mm minimum. heavy duty construction for compacting soil and aggregates., military specification folding entrenching shovel. three position locking mechanism. blade material high carbon steel. blade hardness 45 to 55 hrc. overall length 580 mm minimum when open. folded length 250 mm maximum. powder coated finish. serrated edge on one side. carry pouch included., head weight 1 kg. forged high carbon steel. heat treated. double face. face hardness 50 to 55 hrc. fiberglass or hardwood handle. handle length 300 mm to 350 mm. heavy duty construction., head weight 2 kg. drop forged high carbon steel. heat treated cutting edge. blade hardness 50 to 55 hrc. cutting edge width 120 mm minimum. eye suitable for standard wooden handle. rust resistant finish., head weight 6 kg. forged high carbon steel. one flat striking face and one chisel face. heat treated. face hardness 50 to 55 hrc. fiberglass or seasoned hardwood handle. handle length 900 mm minimum. anti slip grip. heavy duty construction., head weight 850 gram. high carbon steel head. one square striking face and one chisel end. heat treated. face hardness 50 to 55 hrc. hardwood or fiberglass handle. handle length 300 mm minimum. heavy duty construction., head weight 600 gram to 800 gram. forged high carbon steel. one flat face and one chisel edge. heat treated. hardwood or fiberglass handle. handle length 300 mm minimum. suitable for brick and stone masonry work., voltage 18 volt dc. chuck type sds plus. battery lithium ion 4 ah minimum. motor type brushless or brushed. impact energy 1.5 joule to 2.6 joule. no load speed 0 to 1400 rpm. impact rate 0 to 4675 bpm. three operating modes rotary drilling hammer drilling and chiselling. maximum drilling capacity concrete 28 mm metal 13 mm wood 30 mm. tool weight 2.3 kg to 3.5 kg including battery. integrated mechanical or electronic safety clutch with anti rotation protection. vibration reduction system. variable speed control. forward and reverse function. led work light. fast charger. minimum two lithium ion batteries of 4 ah each. heavy duty carry case included. manufacturer iso 9001 certified. warranty 1 year minimum. make bosch or makita or dewalt or hilti or equivalent., input power 650 watt to 750 watt. operating voltage 220 volt to 240 volt ac 50 hz. no load speed 15000 rpm to 17000 rpm. planing width 82 mm. adjustable planing depth 0 mm to 2.6 mm. rebating depth 9 mm minimum. heavy duty aluminium base plate with v groove. reversible tungsten carbide blades. dual chip ejection. adjustable depth control. parking shoe. ergonomic soft grip handle with safety lock switch. dust collection facility. accessories to include parallel guide wrench and dust bag. manufacturer iso 9001 certified. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., professional carpenter hand tool kit comprising essential hand tools. heavy duty carrying case. tools made of chrome vanadium steel or high carbon steel. ergonomic insulated handles. manufacturer iso 9001 certified. make bosch or stanley or taparia or ingco or equivalent., overall length 18 inch. blade material chrome vanadium steel. blade length 300 mm minimum. magnetic tip. hardened and tempered blade. ergonomic anti slip handle. manufacturer iso 9001 certified. make taparia or stanley or bosch or equivalent., size 6 inch x 2 inch x 1 inch. material silicon carbide. double sided coarse and fine grit. suitable for sharpening carpenter tools. heavy duty quality., blade width 2 inch. material high carbon tool steel. hardened and tempered. hardness 58 to 62 hrc. precision ground cutting edge. suitable for standard hand jack plane., manual hand drill with geared drive. chuck capacity 1.5 mm to 10 mm. steel body. hardened steel gears. wooden or polypropylene handle. smooth operation. heavy duty construction., input power 650 watt to 750 watt. voltage 220 volt to 240 volt ac. no load speed 15000 rpm to 17000 rpm. planing width 82 mm. adjustable planing depth 0 mm to 2.6 mm. rebating depth 9 mm minimum. tungsten carbide blades. aluminium base plate. dust collection facility. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., blade diameter 12 inch. input power 1800 watt minimum. voltage 220 volt to 240 volt ac. no load speed 4000 rpm minimum. maximum cutting depth 100 mm minimum. adjustable bevel 0 degree to 45 degree. blade guard. dust extraction port. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., input power 650 watt to 750 watt. voltage 220 volt to 240 volt ac. no load speed 15000 rpm to 17000 rpm. planing width 82 mm. adjustable planing depth 0 mm to 2.6 mm. aluminium base plate. tungsten carbide blades. dust collection facility. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., material high carbon steel. size 9 inch to 12 inch. hardened and tempered. polished finish. heavy duty construction. suitable for carpenter marking and shaping work. indigenous pattern., frame size 12 inch. heavy duty tubular steel frame. suitable for 300 mm blade. adjustable blade tension. ergonomic handle. powder coated finish. blade included. make taparia or stanley or eclipse or equivalent., heavy duty garden raker. number of prongs 10 to 12. prong material high carbon steel. head width 300 mm to 350 mm. prongs heat treated. handle length 1200 mm to 1500 mm. hardwood handle with firm grip. powder coated finish., blade diameter 12 inch. input power 1800 watt minimum. operating voltage 220 volt to 240 volt ac 50 hz. no load speed 4000 rpm minimum. cutting depth 100 mm minimum at 90 degree. bevel capacity 0 degree to 45 degree. carbide tipped blade. blade guard. dust extraction port. soft grip handle. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., blade diameter 12 inch. input power 1800 watt minimum. operating voltage 220 volt to 240 volt ac. no load speed 4000 rpm minimum. maximum cutting depth 100 mm minimum. adjustable bevel 0 degree to 45 degree. one extra tungsten carbide tipped blade included. heavy duty carry case. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., number of prongs 12. head material mild steel. head length 12 inch. heat treated prongs. hardwood handle length 1200 mm minimum. powder coated finish. heavy duty construction., capacity 10 litre minimum. material heavy gauge mild steel. hand operated pump. brass spray nozzle. flexible hose 1.5 metre minimum. working pressure 3 bar minimum. leak proof construction. powder coated finish. suitable for spraying bitumen emulsion and primer., conforming to is 841 latest. head weight 2 kg. oval round nose eye. forged high carbon steel. heat treated. face hardness 50 to 55 hrc. without handle. black finish., conforming to is 841 latest. head weight 5 kg to 6 kg. oval round nose eye. forged high carbon steel. heat treated. face hardness 50 to 55 hrc. without handle. black finish., head weight 6 kg. forged high carbon steel. heat treated. double face. fiberglass or seasoned hardwood handle. handle length 900 mm minimum. anti slip grip. heavy duty construction, size half inch and three fourth inch. material forged high carbon steel. heat treated. hardness 50 to 55 hrc. overall length 200 mm to 250 mm. hardened cutting edge. suitable for stone dressing and masonry work., measuring length 5 metre. blade material stainless steel. fibre reinforced abs case. blade width 19 mm minimum. blade thickness 0.10 mm minimum. lock button. graduation in mm and cm. accuracy class ii. warranty 1 year minimum. make freemans or stanley or bosch or equivalent., measuring length 15 metre. blade material stainless steel. fibre reinforced abs case. blade width 12 mm minimum. blade thickness 0.10 mm minimum. folding rewind handle. graduation in mm and cm. accuracy class ii. warranty 1 year minimum. make freemans or stanley or bosch or equivalent., measuring length 30 metre. blade material stainless steel. fibre reinforced abs case. blade width 13 mm minimum. blade thickness 0.10 mm minimum. folding rewind handle. graduation in mm and cm. accuracy class ii. warranty 1 year minimum. make freemans or stanley or bosch or equivalent., blade length 12 inch. blade material high carbon steel. blade thickness 1 mm minimum. triple ground hardened teeth. teeth per inch 7 to 9. ergonomic anti slip handle. suitable for wood cutting. make stanley or bahco or taparia or equivalent., blade length 20 inch to 21 inch. blade material high carbon steel. blade thickness 1 mm minimum. triple ground hardened teeth. teeth per inch 7 to 9. ergonomic anti slip handle. suitable for heavy duty wood cutting. make stanley or bahco or taparia or equivalent., blade width 1 inch. blade material chrome vanadium steel or high carbon steel. hardened and tempered. hardness 58 to 62 hrc. bevel edge. wooden or polypropylene handle with steel striking cap. make stanley or taparia or bosch or equivalent., blade width 2 inch. blade material chrome vanadium steel or high carbon steel. hardened and tempered. hardness 58 to 62 hrc. bevel edge. wooden or polypropylene handle with steel striking cap. make stanley or taparia or bosch or equivalent., size half inch. material forged high carbon steel. heat treated. precision ground spiral. eye type. suitable for wood boring. rust resistant finish. make taparia or stanley or equivalent., length 8 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 12 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 18 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 24 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 18 inch. body material heavy duty steel. three precision acrylic vials. accuracy 0.5 mm per metre or better. powder coated finish. shock resistant end caps. make freemans or stanley or bosch or equivalent., length 24 inch. body material heavy duty steel. three precision acrylic vials. accuracy 0.5 mm per metre or better. powder coated finish. shock resistant end caps. make freemans or stanley or bosch or equivalent.
Agency / Dept :
border road organisation BRO
Due Date :
Sep 09, 2026 (9 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16933377
Location : bangalore , karnataka
Source : GEM Tenders
LIVE TENDER
tender for trade training equipments required for aww and metal - smith shop plywood 12mm 8 feet x 4 feet aa grade , plywood 19mm 8 feet x 4 feet aa grade , plywood 6mm 8 feet x 4 feet aa grade , gi sheet 24g 8 feet x 4 feet , gi wire 8 swg 100 mtr roll , hand cutting machine , haps and staples 3 inch , hinges 1inch , hinges 2inch , hinges 3inch , ms sheet 20g 8 feet x4 feet , ms sheet 24g 8 feet x4 feet , pneumatic pop rivet gun , ppgi sheet 12 feet x 3.5 feet 24g , sheet cutting nibbler machine , side handle 4inch , 13 x 6 self screw star , 19 x6 self screw star , 2 track bottom 12 feet long , 2 track side 12 feet long , 2.5inch x 1.5 inch pipe 12 feet long , 2t oil for engine , 4mm drill bit steel , 5mm drill bit steel , 6mm hammer bit socket type , 6mm socket for bolt , 8mm drill bit steel , 90 degree corner clamp , 9mm navopan board 8 feet x4 feet , acp 4mm sheet 8 feet x4 feet , adze , aluminium door handle 6inch , aluminium door lock , ball pein hammer 0.5lb , band saw blade 3inch width , band saw machine belt , beeding 1 1 i 2 inch x 1 i 2inch teak wood first quality , beeding 1 inch x 1 i 2 inch teak wood first quality , beeding 1 i 2 inch x 1 i 2 inch teak wood first quality , bevel square , bolt, nut and washers , both side open 12 feet long , butt hinges 1inch , butt hinges 1.5inch , butt hinges 2inch , butt hinges 3inch , c gear 12feet long with gear wheel , carbon brush angle grinder , carbon brush circular saw machine , carbon brush drilling machine , carbon brush jig saw machine , carbon brush miter saw machine catpart no gcm12mx , carbon brush sanding machine , card file steel wire brush for file , carpenter marking gauge, mortise gauge , carpenter vice , carving tools set , centre punch , chalk piece white , circular saw blade 10 inch, 7 inch, 5 inch , claw hammer , clip rubber , cnc bit - 1.5mm ball nose , cnc bit - 1.5mm end mill , cnc bit - 2mm ball nose , cnc bit - 2mm end mill , cnc bit - 3mm ball nose , cnc bit - 3mm end mill , cnc bit - 4mm ball nose , cnc bit - 4mm end mill , cnc bit - 6mm end mill, plywood 12mm 8 feet x 4 feet aa grade, plywood 19mm 8 feet x 4 feet aa grade, plywood 6mm 8 feet x 4 feet aa grade, gi sheet 24g 8 feet x 4 feet, gi wire 8 swg 100 mtr roll, hand cutting machine, haps and staples 3 inch, hinges 1inch, hinges 2inch, hinges 3inch, ms sheet 20g 8 feet x4 feet, ms sheet 24g 8 feet x4 feet, pneumatic pop rivet gun, ppgi sheet 12 feet x 3.5 feet 24g, sheet cutting nibbler machine, side handle 4inch, 13 x 6 self screw star, 19 x6 self screw star, 2 track bottom 12 feet long, 2 track side 12 feet long, 2.5inch x 1.5 inch pipe 12 feet long, 2t oil for engine, 4mm drill bit steel, 5mm drill bit steel, 6mm hammer bit socket type, 6mm socket for bolt, 8mm drill bit steel, 90 degree corner clamp, 9mm navopan board 8 feet x4 feet, acp 4mm sheet 8 feet x4 feet, adze, aluminium door handle 6inch, aluminium door lock, ball pein hammer 0.5lb, band saw blade 3inch width, band saw machine belt, beeding 1 1 i 2 inch x 1 i 2 inch teak wood first quality, beeding 1 inch x 1 i 2 inch teak wood first quality, beeding 1 i 2 inch x 1 i 2 inch teak wood first quality, bevel square, bolt, nut and washers, both side open 12 feet long, butt hinges 1inch, butt hinges 1.5inch, butt hinges 2inch, butt hinges 3inch, c gear 12feet long with gear wheel, carbon brush angle grinder, carbon brush circular saw machine, carbon brush drilling machine, carbon brush jig saw machine, carbon brush miter saw machine catpart no gcm12mx, carbon brush sanding machine, card file steel wire brush for file, carpenter marking gauge, mortise gauge, carpenter vice, carving tools set, centre punch, chalk piece white, circular saw blade 10 inch, 7 inch, 5 inch, claw hammer, clip rubber, cnc bit - 1.5mm ball nose, cnc bit - 1.5mm end mill, cnc bit - 2mm ball nose, cnc bit - 2mm end mill, cnc bit - 3mm ball nose, cnc bit - 3mm end mill, cnc bit - 4mm ball nose, cnc bit - 4mm end mill, cnc bit - 6mm end mill
Agency / Dept :
indian army
Due Date :
Sep 01, 2026 (1 day left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16050482
Location : dahod , gujarat
tender for valve case complete assembly, valve case complete assembly with piston for pneumatic rivetting hammer, suit able for chicago pneumatic rivetting hammer, modelcp-4689. with oem test certificate & war ranty certificate. brand: iam/cp or eqivalent only. - warranty period: 30 months after the date of delivery pl code : 723001460011
Agency / Dept :
western railway WR
Due Date :
Jul 14, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16106632
Location : nashik , maharashtra
Source : GEM Tenders
tender for repair and overhauling service - multifunction machines mfm; repair of hammer rivetting pneumatic; yes; buyer premises, service provider premises
Agency / Dept :
indian air force IAF
Due Date :
Jul 07, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16195226
Location : nashik , maharashtra
Source : GEM Tenders
tender for repair and overhauling service - multifunction machines mfm; repair of hammer rivetting pneumatic; yes; buyer premises, service provider premises
Agency / Dept :
indian air force IAF
Due Date :
Jul 11, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16142609
Location : nashik , maharashtra
Source : GEM Tenders
tender for repair and overhauling service - multifunction machines mfm; repair of hammer rivetting pneumatic; yes; buyer premises, service provider premises
Agency / Dept :
indian air force IAF
Due Date :
Jul 09, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15929016
Location : unnao , uttar pradesh
Source : GEM Tenders
corrigendum tender for gd m.c head lower bell , neauprene seal,hydrotesting unit , l bend for filling gun , gd.pt ms sliding bush , screw for pneumatic cylinder , supporting rod ss 40x300 for gd.pt , ss locking bush for clamping rod , pneumatic cylinder shaft 50x160 short thread , pneumatic cylinder shaft 50x160 long thread , v belt a 66,b62,b66 antistatic , pneumatic cylinder norgren.festo 63x25 , lot adopter , plummer block ucp 212 ntn bearing , vibration rubber damper , upper head brass for antennae valve ,norgren , manual sealing gun , antennae valve ,norgren , wd 40 spray , thread locker , 40x400 and 40x400 cylinder guide rail , lens for optical fibre z017400 , coil for metalwork valve , pu seal for gd lower bell , optical fibre cable,sick , push button air valve ,pneumax , spring for centering gun , allen csk bolt 6x50mm,10x30mm ht tvs , chain lock make diamond , pneumatic cylinder shaft 50x80 short thread , roller clamping arm for gd and pt , hot air sealing gun straight type , base of gd ,central section ms , ht bolt 8x40 mm,8x75mm , hexagonal bolt with nut and washer 10x40mm , nut bolt with washer 12 x40 mm , hexagonal bolt with nut and washer 16x75mm , antennae wire , vision unit antennae rod , flameproof sealing unit sensor , yoke plate , clp rd sds drill bit hammer 6x160,12x260,16x350mm , it hss drill p.s 8,10,12 mm , welding electrode 3to 15mm ,manglam , seal kit ck 95 40 , teflon roller with dual bearing , flexible coipling 16x1to 5 ,for introduction unit , pt gun bottom ss head to 6 hole of 8 mm , sensor cable to 1,3,5,7,10mtr , allen csk bolt 0.5x2mm ht tvs , wheel for carousel , welding rod ss to esab make , reflector to white , load cell cable mk 4 , load cell cable to check scale , ss wheel to telescopic boom , mounting for gd cylinder , nylock nut to 6,8 ,10mm , ms anchor fastener 16x150, 12x150 , frl 0.5 inch , pneumatic single pilot valve 2.5 , clamping guide ms block , linear bearing , guide rod ejection unit,introduction unit , conveyor bend teflon , seal kit 50x160 to norgren , elbow connector, size 0.25inchx4mm , elbow connector,size 0.25inchx6mm , elbow connector,size 0.25inchx8mm , elbow connector,size 0.125inchx4mm , elbow connector,size 0.125inchx6mm , elbow connector,size 0.125inchx8mm , elbow connector,size 0.5inchx8mm , elbow connector,size 0.5inchx10mm , elbow connector,size 0.5inchx12mm , reducer,pu, size 6to 4mm,8to 4mm , reducer,pu, size 8to 6mm , reducer,pu, size 10to 8mm , reducer,pu, size 12to 8mm , connector,straight, size 4x4mm,8x8mm , connector,straight, size 6x6mm , connector,straight, size 10x10mm , connector,straight, size 12x12mm , t connector,size 4x4x4mm , t connector,size 6x6x6mm , t connector,size 8x8x8mm , t connector,size 10x10x10mm , t connector,size 12x12x12mm , wll24to 2x430501 ,optical sensor , pu tube 10mm and 12 mm , pu tube 8 mm , pu tube 6 mm , pu tube 4 mm , hot air sealing gun baliga and flameproof type , pressure gauge 2inch ,0to 10 kg per cm2 micro , pressure gauge 4inch ,0to 10 kg per cm2 micro, consumables spares, 8 teeth sprocket with teflon bush, drive unit, pneumatic cylinder 40x400 metalwork flat shaft, 14 teeth sprocket, conveyor, pillow block bearing, drive chain riveted pin, counter weight, chain set, conveyor chain ,riveted type, double stopper set, conveyoyor uhmwear strip, 40x10x2500 mm, taper strip 1850x32x1.625 mm, taper strip 1550x32x1.625 mm, spider l 150, hacksaw blade,hss,12x0.5in ,mirinda, hacksaw frame, electrode, weld,e6013,3.15mm, grinding wheel ag4 packet, cutting wheel ag4 packet, bolt,hex,ms, 1.5inx10mm,2inx10mm, 16mmx4in,1inx4mm,1inx8mm,1.5inx8mm, tipped drill bit,8,10,12mm packet, drill bit,grouting,hss,m10,m12,m16, 10mm,12mm,16mm grouting bolts, cable tie, size 150mm ,200mm, 250mm, 300mm packet, wear strip, soldering iron rod, brass block gdpt, rectangular block gdpt, shaft 60 mm od x 850 mm length, duplex chain 3 mtr, pneumatic cylinder d 40 l 300 metalwork with flat shaft, introduction cylinder d 50 l 450 norgren, clamping cylinder d 50 l 160 norgren, stopper cylinder back mounting norgren, arms set carousel, gas stop valve service kit, wear strip 50x6 mm 50 mtr roll, toggle joint, under cover gi for conveyor, coupling patta, pusher rubber pad,with ss bush, spindle for pt gun,pressure drop, eye bolt for filling machine, pneumatic cylinder 50x80,norgren, piston rod 40x300,hexagon, piston rod 40x400,hexagon, u seal kit hexagon, deadman switch industrial 2.5 0.25inch ,dp055061, wt 24 2x 400 diffuse sensor ,sick, pencil inductive sensor, gd m.c head lower bell, neauprene seal,hydrotesting unit, l bend for filling gun, gd.pt ms sliding bush, screw for pneumatic cylinder, supporting rod ss 40x300 for gd.pt, ss locking bush for clamping rod, pneumatic cylinder shaft 50x160 short thread, pneumatic cylinder shaft 50x160 long thread, v belt a 66,b62,b66 antistatic, pneumatic cylinder norgren.festo 63x25, lot adopter, plummer block ucp 212 ntn bearing, vibration rubber damper, upper head brass for antennae valve ,norgren, manual sealing gun, antennae valve ,norgren, wd 40 spray, thread locker, 40x400 and 40x400 cylinder guide rail, lens for optical fibre z017400, coil for metalwork valve, pu seal for gd lower bell, optical fibre cable,sick, push button air valve ,pneumax, spring for centering gun, allen csk bolt 6x50mm,10x30mm ht tvs, chain lock make diamond, pneumatic cylinder shaft 50x80 short thread, roller clamping arm for gd and pt, hot air sealing gun straight type, base of gd ,central section ms, ht bolt 8x40 mm,8x75mm, hexagonal bolt with nut and washer 10x40mm, nut bolt with washer 12 x40 mm, hexagonal bolt with nut and washer 16x75mm, antennae wire, vision unit antennae rod, flameproof sealing unit sensor, yoke plate, clp rd sds drill bit hammer 6x160,12x260,16x350mm, it hss drill p.s 8,10,12 mm, welding electrode 3to 15mm ,manglam, seal kit ck 95 40, teflon roller with dual bearing, flexible coipling 16x1to 5 ,for introduction unit, pt gun bottom ss head to 6 hole of 8 mm, sensor cable to 1,3,5,7,10mtr, allen csk bolt 0.5x2mm ht tvs, wheel for carousel, welding rod ss to esab make, reflector to white, load cell cable mk 4, load cell cable to check scale, ss wheel to telescopic boom, mounting for gd cylinder, nylock nut to 6,8 ,10mm, ms anchor fastener 16x150, 12x150, frl 0.5 inch, pneumatic single pilot valve 2.5, clamping guide ms block, linear bearing, guide rod ejection unit,introduction unit, conveyor bend teflon, seal kit 50x160 to norgren, elbow connector, size 0.25inchx4mm, elbow connector,size 0.25inchx6mm, elbow connector,size 0.25inchx8mm, elbow connector,size 0.125inchx4mm, elbow connector,size 0.125inchx6mm, elbow connector,size 0.125inchx8mm, elbow connector,size 0.5inchx8mm, elbow connector,size 0.5inchx10mm, elbow connector,size 0.5inchx12mm, reducer,pu, size 6to 4mm,8to 4mm, reducer,pu, size 8to 6mm, reducer,pu, size 10to 8mm, reducer,pu, size 12to 8mm, connector,straight, size 4x4mm,8x8mm, connector,straight, size 6x6mm, connector,straight, size 10x10mm, connector,straight, size 12x12mm, t connector,size 4x4x4mm, t connector,size 6x6x6mm, t connector,size 8x8x8mm, t connector,size 10x10x10mm, t connector,size 12x12x12mm, wll24to 2x430501 ,optical sensor, pu tube 10mm and 12 mm, pu tube 8 mm, pu tube 6 mm, pu tube 4 mm, hot air sealing gun baliga and flameproof type, pressure gauge 2inch ,0to 10 kg per cm2 micro, pressure gauge 4inch ,0to 10 kg per cm2 micro, pressure gauge 2inch ,0to 28 kg per cm2 micro, pressure gauge 4inch ,0to 28 kg per cm2 micro, pressure gauge 2inch ,0to 16 kg per cm2 micro, pressure gauge 4inch ,0to 16 kg per cm2 micro, pressure gauge 2inch ,0to 21 kg percm2 micro, pressure gauge 4inch ,0to 21 kg per cm2 micro, pressure gauge 6inch ,0to 21 kg per cm2 micro, pressure gauge 2inch ,0to 42 kg per cm2 micro, pressure gauge 4inch ,0to 42 kg per cm2 micro, temperature gauge 4inch ,0 to 200 degree celsius micro, pressure gauge 6inch ,0 to160 kg per cm2 micro, vacuum gauge 4inch ,0 to760 mm per hg micro, hose parker 2000mm 0.5 inch, hose parker 2000mm 1 inch, hose parker 900mm and 1000mm 0.5 inch, display cuc mark iv, keypad rubber type mkiv, magnetic sensor pneumatic, cap hammering head with white teflon, carousal drive belt anti static, pressure switch flp smart tech, mechanical tool master set,400to 500 pcs include torque wrench ,allen key set ,pliersetc., conveyor c channel, bolt, hex,ms,3inx8mm tvs, load cell 200kg, 5m cable flintec, supporting rod ss 40x400 for gd.pt, cuc card mark iv advanced, cap hammering head with white teflon, carousal drive belt, pressure switch flp, solenoid valve rotex, socket 1 inch thread, socket 0.5 inch thre, hex nipple 1x1 inch and 0.5x0.5 inch, adapter 1x0.75 inch and 0.5x0.375 inch, adapter 1x0.5 inch, adapter 0.5x0.25 inch, stud 30to 32 and 24to 27, stud 21 to 23, belt jockey compressor b72, plug,male transmitter 110703, plug,female transmitter,110704, ucp 209 plumber block ,ntn, brass block for gd.pt machine, sealing cup flameproof straight type, straight fitting 0.375x8 mm, vision unit usb hub,121227, pressure transmitter head, a.d convertor, t connector in gd.pt, pr module controller in carousel mk1v advance vfd, hasm hose pie 1 mtr and 3 mtr, board, part no 130034 pitxe38,qc 1to 91ghz,168201301377
Agency / Dept :
hindustan petroleum corporation limited HPCL
Due Date :
Jun 24, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15763051
Location : unnao , uttar pradesh
Source : GEM Tenders
tender for gd m.c head lower bell , neauprene seal,hydrotesting unit , l bend for filling gun , gd.pt ms sliding bush , screw for pneumatic cylinder , supporting rod ss 40x300 for gd.pt , ss locking bush for clamping rod , pneumatic cylinder shaft 50x160 short thread , pneumatic cylinder shaft 50x160 long thread , v belt a 66,b62,b66 antistatic , pneumatic cylinder norgren.festo 63x25 , lot adopter , plummer block ucp 212 ntn bearing , vibration rubber damper , upper head brass for antennae valve ,norgren , manual sealing gun , antennae valve ,norgren , wd 40 spray , thread locker , 40x400 and 40x400 cylinder guide rail , lens for optical fibre z017400 , coil for metalwork valve , pu seal for gd lower bell , optical fibre cable,sick , push button air valve ,pneumax , spring for centering gun , allen csk bolt 6x50mm,10x30mm ht tvs , chain lock make diamond , pneumatic cylinder shaft 50x80 short thread , roller clamping arm for gd and pt , hot air sealing gun straight type , base of gd ,central section ms , ht bolt 8x40 mm,8x75mm , hexagonal bolt with nut and washer 10x40mm , nut bolt with washer 12 x40 mm , hexagonal bolt with nut and washer 16x75mm , antennae wire , vision unit antennae rod , flameproof sealing unit sensor , yoke plate , clp rd sds drill bit hammer 6x160,12x260,16x350mm , it hss drill p.s 8,10,12 mm , welding electrode 3to 15mm ,manglam , seal kit ck 95 40 , teflon roller with dual bearing , flexible coipling 16x1to 5 ,for introduction unit , pt gun bottom ss head to 6 hole of 8 mm , sensor cable to 1,3,5,7,10mtr , allen csk bolt 0.5x2mm ht tvs , wheel for carousel , welding rod ss to esab make , reflector to white , load cell cable mk 4 , load cell cable to check scale , ss wheel to telescopic boom , mounting for gd cylinder , nylock nut to 6,8 ,10mm , ms anchor fastener 16x150, 12x150 , frl 0.5 inch , pneumatic single pilot valve 2.5 , clamping guide ms block , linear bearing , guide rod ejection unit,introduction unit , conveyor bend teflon , seal kit 50x160 to norgren , elbow connector, size 0.25inchx4mm , elbow connector,size 0.25inchx6mm , elbow connector,size 0.25inchx8mm , elbow connector,size 0.125inchx4mm , elbow connector,size 0.125inchx6mm , elbow connector,size 0.125inchx8mm , elbow connector,size 0.5inchx8mm , elbow connector,size 0.5inchx10mm , elbow connector,size 0.5inchx12mm , reducer,pu, size 6to 4mm,8to 4mm , reducer,pu, size 8to 6mm , reducer,pu, size 10to 8mm , reducer,pu, size 12to 8mm , connector,straight, size 4x4mm,8x8mm , connector,straight, size 6x6mm , connector,straight, size 10x10mm , connector,straight, size 12x12mm , t connector,size 4x4x4mm , t connector,size 6x6x6mm , t connector,size 8x8x8mm , t connector,size 10x10x10mm , t connector,size 12x12x12mm , wll24to 2x430501 ,optical sensor , pu tube 10mm and 12 mm , pu tube 8 mm , pu tube 6 mm , pu tube 4 mm , hot air sealing gun baliga and flameproof type , pressure gauge 2inch ,0to 10 kg per cm2 micro , pressure gauge 4inch ,0to 10 kg per cm2 micro, consumables spares, 8 teeth sprocket with teflon bush, drive unit, pneumatic cylinder 40x400 metalwork flat shaft, 14 teeth sprocket, conveyor, pillow block bearing, drive chain riveted pin, counter weight, chain set, conveyor chain ,riveted type, double stopper set, conveyoyor uhmwear strip, 40x10x2500 mm, taper strip 1850x32x1.625 mm, taper strip 1550x32x1.625 mm, spider l 150, hacksaw blade,hss,12x0.5in ,mirinda, hacksaw frame, electrode, weld,e6013,3.15mm, grinding wheel ag4 packet, cutting wheel ag4 packet, bolt,hex,ms, 1.5inx10mm,2inx10mm, 16mmx4in,1inx4mm,1inx8mm,1.5inx8mm, tipped drill bit,8,10,12mm packet, drill bit,grouting,hss,m10,m12,m16, 10mm,12mm,16mm grouting bolts, cable tie, size 150mm ,200mm, 250mm, 300mm packet, wear strip, soldering iron rod, brass block gdpt, rectangular block gdpt, shaft 60 mm od x 850 mm length, duplex chain 3 mtr, pneumatic cylinder d 40 l 300 metalwork with flat shaft, introduction cylinder d 50 l 450 norgren, clamping cylinder d 50 l 160 norgren, stopper cylinder back mounting norgren, arms set carousel, gas stop valve service kit, wear strip 50x6 mm 50 mtr roll, toggle joint, under cover gi for conveyor, coupling patta, pusher rubber pad,with ss bush, spindle for pt gun,pressure drop, eye bolt for filling machine, pneumatic cylinder 50x80,norgren, piston rod 40x300,hexagon, piston rod 40x400,hexagon, u seal kit hexagon, deadman switch industrial 2.5 0.25inch ,dp055061, wt 24 2x 400 diffuse sensor ,sick, pencil inductive sensor, gd m.c head lower bell, neauprene seal,hydrotesting unit, l bend for filling gun, gd.pt ms sliding bush, screw for pneumatic cylinder, supporting rod ss 40x300 for gd.pt, ss locking bush for clamping rod, pneumatic cylinder shaft 50x160 short thread, pneumatic cylinder shaft 50x160 long thread, v belt a 66,b62,b66 antistatic, pneumatic cylinder norgren.festo 63x25, lot adopter, plummer block ucp 212 ntn bearing, vibration rubber damper, upper head brass for antennae valve ,norgren, manual sealing gun, antennae valve ,norgren, wd 40 spray, thread locker, 40x400 and 40x400 cylinder guide rail, lens for optical fibre z017400, coil for metalwork valve, pu seal for gd lower bell, optical fibre cable,sick, push button air valve ,pneumax, spring for centering gun, allen csk bolt 6x50mm,10x30mm ht tvs, chain lock make diamond, pneumatic cylinder shaft 50x80 short thread, roller clamping arm for gd and pt, hot air sealing gun straight type, base of gd ,central section ms, ht bolt 8x40 mm,8x75mm, hexagonal bolt with nut and washer 10x40mm, nut bolt with washer 12 x40 mm, hexagonal bolt with nut and washer 16x75mm, antennae wire, vision unit antennae rod, flameproof sealing unit sensor, yoke plate, clp rd sds drill bit hammer 6x160,12x260,16x350mm, it hss drill p.s 8,10,12 mm, welding electrode 3to 15mm ,manglam, seal kit ck 95 40, teflon roller with dual bearing, flexible coipling 16x1to 5 ,for introduction unit, pt gun bottom ss head to 6 hole of 8 mm, sensor cable to 1,3,5,7,10mtr, allen csk bolt 0.5x2mm ht tvs, wheel for carousel, welding rod ss to esab make, reflector to white, load cell cable mk 4, load cell cable to check scale, ss wheel to telescopic boom, mounting for gd cylinder, nylock nut to 6,8 ,10mm, ms anchor fastener 16x150, 12x150, frl 0.5 inch, pneumatic single pilot valve 2.5, clamping guide ms block, linear bearing, guide rod ejection unit,introduction unit, conveyor bend teflon, seal kit 50x160 to norgren, elbow connector, size 0.25inchx4mm, elbow connector,size 0.25inchx6mm, elbow connector,size 0.25inchx8mm, elbow connector,size 0.125inchx4mm, elbow connector,size 0.125inchx6mm, elbow connector,size 0.125inchx8mm, elbow connector,size 0.5inchx8mm, elbow connector,size 0.5inchx10mm, elbow connector,size 0.5inchx12mm, reducer,pu, size 6to 4mm,8to 4mm, reducer,pu, size 8to 6mm, reducer,pu, size 10to 8mm, reducer,pu, size 12to 8mm, connector,straight, size 4x4mm,8x8mm, connector,straight, size 6x6mm, connector,straight, size 10x10mm, connector,straight, size 12x12mm, t connector,size 4x4x4mm, t connector,size 6x6x6mm, t connector,size 8x8x8mm, t connector,size 10x10x10mm, t connector,size 12x12x12mm, wll24to 2x430501 ,optical sensor, pu tube 10mm and 12 mm, pu tube 8 mm, pu tube 6 mm, pu tube 4 mm, hot air sealing gun baliga and flameproof type, pressure gauge 2inch ,0to 10 kg per cm2 micro, pressure gauge 4inch ,0to 10 kg per cm2 micro, pressure gauge 2inch ,0to 28 kg per cm2 micro, pressure gauge 4inch ,0to 28 kg per cm2 micro, pressure gauge 2inch ,0to 16 kg per cm2 micro, pressure gauge 4inch ,0to 16 kg per cm2 micro, pressure gauge 2inch ,0to 21 kg percm2 micro, pressure gauge 4inch ,0to 21 kg per cm2 micro, pressure gauge 6inch ,0to 21 kg per cm2 micro, pressure gauge 2inch ,0to 42 kg per cm2 micro, pressure gauge 4inch ,0to 42 kg per cm2 micro, temperature gauge 4inch ,0 to 200 degree celsius micro, pressure gauge 6inch ,0 to160 kg per cm2 micro, vacuum gauge 4inch ,0 to760 mm per hg micro, hose parker 2000mm 0.5 inch, hose parker 2000mm 1 inch, hose parker 900mm and 1000mm 0.5 inch, display cuc mark iv, keypad rubber type mkiv, magnetic sensor pneumatic, cap hammering head with white teflon, carousal drive belt anti static, pressure switch flp smart tech, mechanical tool master set,400to 500 pcs include torque wrench ,allen key set ,pliersetc., conveyor c channel, bolt, hex,ms,3inx8mm tvs, load cell 200kg, 5m cable flintec, supporting rod ss 40x400 for gd.pt, cuc card mark iv advanced, cap hammering head with white teflon, carousal drive belt, pressure switch flp, solenoid valve rotex, socket 1 inch thread, socket 0.5 inch thre, hex nipple 1x1 inch and 0.5x0.5 inch, adapter 1x0.75 inch and 0.5x0.375 inch, adapter 1x0.5 inch, adapter 0.5x0.25 inch, stud 30to 32 and 24to 27, stud 21 to 23, belt jockey compressor b72, plug,male transmitter 110703, plug,female transmitter,110704, ucp 209 plumber block ,ntn, brass block for gd.pt machine, sealing cup flameproof straight type, straight fitting 0.375x8 mm, vision unit usb hub,121227, pressure transmitter head, a.d convertor, t connector in gd.pt, pr module controller in carousel mk1v advance vfd, hasm hose pie 1 mtr and 3 mtr, board, part no 130034 pitxe38,qc 1to 91ghz,168201301377
Agency / Dept :
hindustan petroleum corporation limited HPCL
Due Date :
Jun 22, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16448737
Location : sikar , rajasthan
Source : GEM Tenders
corrigendum tender for capacity 20 to 160 mm , cylinder liner dry and wet liner press fit and slide fit , depth micrometer 0 to 25 mm , dial gauge type 1 gr a complete with clamping devices and with magnetic stand , different type of engine bearing model , different types of piston model , dividers with spring 150 mm , drift punch copper 150 mm , drill point angle gauge , drill twist 1.5 mm to 15 mm various sizes by 0.5 mm , electric soldering iron 60 watt 230 v , electric soldering iron 25 watts 230 v , electric testing screw driver , engineers stethoscope , feeler gauge 20 blades metric , file flat bastard 200 mm , file half round second cut 200 mm , file square second cut 200 mm , file square rough 300 mm , file triangular second cut 150 mm , files assorted sizes and types including safe edge file 20 nos , flat file second cut 250 mm , flat file bastard 350mm , fuel injection pump diesel in line , fuel injection pump dismantling tool kit universal vice , fuel injection pumps ve pump distributor fuel rotary pump dpc pumps along with special tools and accessories , glow plug tester , surface plate l 1600 w 1000 mm c i granite with stand and cover , grease gun , growler , hacksaw frame adjustable type 200 to 300 mm , hammer ball pein 750 gm , hammer chipping 250 gm , hammer copper 1 kg with handle , hammer mallet , hand operated crimping tool wire up to 4 mm , hand operated crimping tool wire up to 10 mm , hand shear universal 250 mm , hollow punch set of seven pieces 6 mm to 15 mm , injector cleaning unit technical , injector testing set hand tester , lifting jack screw type 3 ton capacity , lifting jack screw type 5 ton capacity , lifting jack screw type 20 ton capacity , magnifying glass 75 mm , marking out table l 90 w 60 h 90 cm , multi meter digital , oil pump gear type pump for lmv , oil pump rotor type pump for lmv , oil stone l 15 w 5 h 2.5 cm , oscilloscope 20 mhz , micrometer outside 50 to 75 mm , micrometer outside 75 to 100 mm , pipe flaring tool , piston ring compressor , pliers round nose 150 mm , portable electric drill machine , prick punch 150 mm , punch number 4 mm , rivet sets snap and dolly combined 3 mm 4 mm and 6 mm , scraper flat 250 mm , scraper half round 250 mm , scraper triangular 250 mm , scriber with scribing block universal , set of stock and dies metric , tinmans shear l 450 mm w 600 mm , sheet metal gauge , tinman s shear 300 mm , soldering copper hatchet type 500 gm , solid parallels in pairs different sizes in metric , spanner clyburn 150 mm , spanner t flocks for screwing up and up screwing inaccessible , spanner adjustable 150 mm , spark lighter , spark plug spanner l 14 mm w 18 mm size , steel rule 150 mm inch and metric , straight edge gauge 2 ft , straight edge gauge 4 ft , tachometer counting type , tandem master cylinder with booster working model , taps and dies complete sets b a , taps and dies bsw various type in inch , tap and dies set metric size 03 to 24 mm , taps and die set bsf various type in inch , taps and dies width worth fine , timing lighter new brand , torque wrenches 5 to 35 nm , torque wrenches 12 to 68 nm , torque wrenches 50 to 225 nm , tyre pressure gauge with holding nipple , universal puller , v block l 75 w 38 mm pair with clamps , valve lifter , valve spring compressor universal , vernier caliper 0 to 300 mm with least count 0 point 02 mm , water pump new brand , wire gauge metric , vices of 120 mm jaw , air conditioned crdi vehicle new brand lmv bs vi with abs and speed limiter , arbor press, mechanic diesel lab items, allen key set of 12 pieces with hex key sizes 2 to 14 mm made from forged steel alloy carbon steel, caliper inside 150mm spring made of carbon steel gauging point should be heat treated, centre punch 10mm dia x 100 mm round knurled body made of alloy steel gauging point should be heat treated, screw driver 250 x 9 mm flat tip size 8 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, properly heat treated., hammer ball pein, head weight 500 gm made from forged carbon steel, face heat treated. with wooden handle, hand file 200mm second cut, made of heat treated tool steel with wooden handle., philips screw driver 100 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip with neon tester., philips screw driver 150 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 200 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 250 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 300 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, pliers combination 200mm insulated with moulded sleeves of high voltage grade, made from drop forged alloy steel with side cutting facilities, properly heat treated., screw driver heavy duty 200mm x 9 mm flat tip size 9 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., screw driver heavy duty300mmx 9mm flat tip size 10 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., spanner d.e. 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanner ring 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanners socket with speed handle, t-bar, ratchet and universal up to 32 mm set of 28 pieces with box. made from forged carbon steel., steel rule 300 mm. metric, english both graduation made of stainless steel with conversion table engraved, as per drawing l 150 mm w 200 h 400, wire cutter & stripper 150 mm made of high carbon steel , wire stripping capacity up to 6mm, spanner adjustable 350 mm blade, made from alloy steel, workshop grade, 1 should be trigger operated blow gun with interchangeable nozzles with metal gun 2 fitted with brass air inlet ferrule 3 suitable for quick removal of chips, dust and particulate from any surface 4 operating pressure 80 to 150 psi 5 high pressure nozzle 6 safety nozzle adaptor 7 crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application 8 low pressure nozzle and supplied with manual, ammeter dc shunt type up to 300 amp the shunts are constructed from high grade managing, air ratchet with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box with manual, air impact wrench with 180 ft lb 244 nm max torque and 7100 rpm and a feather touch trigger two position forward power regulator and conveniently located forward reverse ring provide precise control with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box and manual will be provided. square drive half inch bolt size in the box 9 to 27 mm, angle plate size 200x100x200mm made from close grain c.i. workshop grade., anvil 50 kg. single horn type made from cast steel working face heat treated, face having hardie hole & punching hole, stand made from fabricated angle iron (50 x 50 x 6 mm) height 400 mm, alternator starter with minimum 2 hp ac motor digital auto electrical test bench checking for alternator and starter motor auto electrical test bench checking for alternator and starter motor mild steel frame work table top test bench 2 hp and 3 phase1440 rpm motor induction motor suitable for 50 hz 415 v ac supply with heavy duty transformer for starter testing with light run test variable frequency drive vfd overload capability 150 percentage of rated current 60 seconds built in pid simplify the establishment of a closed loop control system key lock and function selection communication port rs 485 4 point 3 inch colour hmi for indication for voltage and current 2 ch analogue input controlled via rs 485 bus utilizing modbus rtu protocol 1 channel dc current input with 75 mv input for shunt 1 channel dc voltage input 200vdc 1 construction of relay output 7a 230vac 2 leds for indicating the power status and signal trans receiving status capable to interface with pc attached with thermal printer communication interface rs485 rtu diode150 a 12 to 24 v 4 nos shunt 200a 75 mv transformer 12v 200 a 24 v 150 a 1 no transformer 0 to 240 v primary 12 to 0 to 12 v secondary 1 no mains supply 415 v ac 3 phase 50 hz ac power supply v belt heavy duty banana terminals on the front panel pulley groove for alternator checking heavy duty rugged vice for mounting alternator and starter operation manual should be provided, voltage 12v input volt 230v 50hz output volt 12 v dc capable for 5ah 35ah battery charged rotary swicth to select volt and amp ammeter display and main switch plus minus knob crocodile connector with wire 2 ft in length aligator clips high current charging upto 15 ampere circuit breaker for reverse battery auto cut off after charging, blow lamp capacity 1000ml body made from brass. with inclined burner type, should be used on vehicle belts where the manufacturer specifies the timing belt tension to be set at a specific location on the belt span between pulleys should have clear incremental markings with knurled knob for accurate measurement. should speed up timing belt installation .measurement range 0 to 80 kg 750 newton supplied in a foam inlay box, power supply electrical electrical cable m 5 mtr working pressure bar 8 to 12 kg cm2 hose length m 10 mtr suction and discharge each motor rpm 2800 rpm flow rate l h 8 to 12 lpm phase 1 phase 3 hp 230 volt suitable for cold water spray gun standard number of pistons plungers 3 pressure gauge auto stop facility for power saving suitable guns for water and foam sprey water filter pressure regulating valve for increasing and decreasing output pressure the operating unit should be mounted on a ms structure trolley type starter switch caster wheel 2 nos water pipe inlet and out let, automatic double pawl braking system capacity range 1- 3 ton fully forged hooks are fitted safety latches shield bearing zinc plated hand chain as standard standard lift 3 meter effort required to lift 3 ton load- 30 kg. with tripod stand & standard accessories., chisel flat 100mm, made of forged steel. point heat treated., circlip plier internal 150 mm drop forge alloy steel heat treatment moulded sleeve . ., circlip plier external 150 mm.drop forge alloy steel heat treatment moulded sleeve ., circlip plier internal 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., circlip plier external 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., clamps c 100mm, made of forged steel., clamps c 150mm, made of forged steel., clamps c 200mm, made of forged steel., tray cleaning 450 into 300mm -gi sheet 18 g side handle both border wires, 1 quickconnect adapter push pressure scale 0 1000 psi 0 7000 2 kpareads pressure from 0 to 1000 psi 3 2 to 9 by 16 diameter gauge 4 thumb button air release should be supplied with adapters for suzuki hyundai gm ford isuzu mercedes toyota volkswagen and peugeot compatible for dry test with adptor standard accessories all above items should be placed secured in a blow molded plastic box or metal box, connecting rod alignment fixture height of fixture 450mm connecting rod 40 to 100mm connecting rod alignment fixture checking bent twist offset precision ground surfaceshould be supplied with following accessories bent and twist indicator bending bar with alignerdial indicator and the connecting rod fixture ms iron should be fitted over a base etc with all accessory, soldering iron copper bit weight 250gm hatchet type with handle, cylinder gauge, bore dial gauge with accessories 20-160 mm least count 0.01 mm self cantering with interchangeable mounted head complete., technical specification cylinder liners of following types dry liner for engine cylinder press fit type wet liner for engine cylinder with rubber o ring slide fit liner piston with ringstandard features, micrometer depth 0 to 25mm lc 0 point 01mm carbide tipped on measuring face made from alloy steel complete in box, dial gauge indicator l.c. 0.1 mm ran- ge 10mm dial graduation 0-50-0 balance plunger type dial & holder. magnetic base with on-off switch, fine tolerance setting arm, stem dia. as per dial indicator, complete set in dial gauge., the model will made out of different type of engine bearing suitable for engine 1 shell bearing for crankshaft with main journal and big end journal 2 thrust bearing for crankshaft 3 ball bearing for crank shaft 4 bush bearing for connecting rod 5 needle bearing for connecting rod 6 bush bearing for camshaft & rocker arm 7 shell bearing for overhead cam shaft 8 needle bearing for rocker arm 9 name mention of each bearing on board, the model will be made out of different type of piston model. 01set concave head dome head flat head solid skirt recessed head light weight model for easy shifting. piston will be mounted on a wooden board name mentioned of each type the piston.and constructional diagram details printed on to a colourful panel with details of applications the item will be supplied in a dust proof box & covered by the acrylic sheet., divider spring joint 150mm, made of alloy steel., drift punch copper 150mm made by copper, drill point angle gauge made by drop forged steel., twist drill straight shank high speed steel 1.5 to 15mm by 0.5mm set 10pcs. high carbon steel &heat treated., soldering iron 60 watt, 230 v.a.c. standard length of mains lead with 3 pin top, bit made from copper., soldering iron 25 watt, 230 v,.a.c. standard length of mains lead with 3 pin top, bit made from copper., neon tester 500 volt heavy duty insulated. handle made from transparent cellulose acetate with plated metal clip. blades made from selected steel chrome & insulated., engineer s stethoscope with standard accessories, feeler gauge set of 20 blades metric, different sizes, length of blades 100 mm, made from alloy steel., file flat 200mm bastard made of heat treated tool steel with wooden handle., file half round 20cm second cut, made of heat treated tool steel with wooden handle., file square 200mm second cut, made of heat treated tool steel with wooden handle., file, square 300mm rough, made of heat treated tool steel with wooden handle., file triangular 150mm second cut, made of heat treated tool steel with wooden handle., files assorted sizes and types including safe edge file (20 nos), made high carbon/high speed steel. size (150 mm)., file flat 250mm second cut, made of heat treated tool steel with wooden handle., file flat 350mm bastard, made of heat treated tool steel with wooden handle., fuel injection pump (diesel) inline complete pump assembly suitable for 4/6 cylinders diesel engine rsv mechanical or pneumatic governor type the item will be supplied on suitable plywood and collared with attractive colour. a dust proof wooden box & covered by the acrylic sheet., fuel injection pump dismantling tool kit 1. universal vice 2. pre stroke setting attachment with gauge, 3. pump couplings, 4. control setting gauge with attachment, 5 .tappet adjusting spanner (thin),6. ring wrench,7. tappet lifter, 8. mechanical finger (gripper), 9. adapter capsule box for fip, 10. thread puller for fly weight, 11. drift for bottom plug, 12. impact screw driver, 13. flower/trox allen key set, 14. attachment for setting angle of accelerate lever, 15. coupling for fip cam, coupling wrench, 16. round nut spanner different type, 17. ve pump holding attachment, 18. inline and rotary pump holding attachments,19. drift for installing and removing oil seal, 20. holder spanner, 21. spring locking plates, 22. governor weight remover., fuel injection pump in diesel type distributor fuel rotary pump with dpc complete pump assembly compatible for 4 cylinders diesel pump operated by handle and constructional diagram details printed on to a colourful panel with details of applications will be supplied with along with all tools and special tools and accessories for dismantling and assembling fuel injection pump special tools 1 extra long socket 2 mounting stand for ve pump distributor fuel rotary pump dpc pumps 3 injection pump special socket 4. coapling for ve pump distributor fuel rotary pump dpc pumps 5 testing jig 6two pin spnner 7 huk spanner 8.pump nozzle refting tool, power input 8point 5 to 15 volt max current 80 ampere, surface plate made of closed grain seasoned cast iron/ granite 1600 mmx 1000 mm grade 1, with calibration test certificate, complete with top cover, side handle. m.s. fabricated standard height stand with leveling screws ., grease gun pressure type 500 gm. capacity hand operated, manufactured from tin plate with steel pump with fixed spot., growler general & internal set suitable to test d.c. armature and ac motor starter rating supply ac. 250volt 50hz., hacksaw frame adjustable type 200-300mm with blade & handle., hammer ball pein head weight 750gm made from forged carbon steel, face heat treated. wooden handle fitted, hammer chipping 250gm with handle, one side chisel and other side pointed end type hard and tempered, steel handle about 250 mm long., hammer copper forged head weight 1000gm with fibre glass handle,, hammer mallet head dia.100 mm. made from wood with handle., hand operated crimping tool for crimping up to 4 mm, hand operated crimping tool for crimping up to 10 mm, hand shear universal( straight snip ) 250 mm, made from drop forge steel. cutting edge hard & tempered., punch hollow, hole dia 6 to 15 mm set of 7 pieces made from alloy steel, main unit power supply ac 220v plus minus 10 percent 50hz ultrasonic cleaner power 30 to 50w ultrasonic bath inner body material stainless steel simulated rpm range 10 to 9990 rpm step 10 rpm time range 1 to 9999 pulse width 0 point 5 to 25 ms step 0 point 1ms fuel tank capacity 2 to 4 ltr no of glass tube 4 nos with marking glass tube holder and manifold moc aluminium display type led suitable for all types of petrol injectors and gdi gasoline direct injection injectors achieve automatic cleaning and testing of injectors the machine should be capable to perform flowing test uniformity/spray ability test will be able to test the uniformity of injecting amount of each injector and to monitor the spraying status of each injector with the help of backlight leakage test will be able to test the sealing and dribbling conditions of injectors under system pressure injecting flow test will be able to check the injecting amount of the injector in 15 seconds of constant injection auto test will be able to test injectors by simulating different working conditions ultrasonic cleaning will be able to perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely, for nozzle sizes presser gauge 0 to 400 kgf cm2 standard accessories steel aluminium fuel container with filter manual hand operating lever handle with grip. along with split pin three way shut off valve with valve spindle. suitable fuel pipes for all injector, lifting jack screw type 3 ton capacity for vehicle 3048 kg road open height 13 inch closed 4 inch dia of screw 1 point 25 inch with bearing type lifting jack, lifting jack screw type 5ton capacity for vehicle 5048 kg road open height 13 closed 7 inch dia of screw 1 point 50 inch with bearing type lifting jack, lifting jack screw type 20 ton capacity road open height 14 inch closed 7 dia of screw 1 point 75 inch to 2 point 0 inch square threads with bearing type, magnifying glass 75mm with handle, marking table made from seasoned close grain c.i. 90cm x 60cm x 90cm. workshop grade with test certificate. with steel handle both side, levelling screws & cover. m.s. fabricated stand in standard size, digits 3 and half digit display lcd display with large digits for easy visibility voltage range ac up to 750v ac voltage range dc up to 1000v dc ac and dc current range up to 20a resistance measurement up to 200 mohm with capacitance frequency diode transistor test audible continuity test data hold facilities, 1. gear type pump for lmv this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine, 1. rotor type pump for lmv. this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine., stone oil 15 x 5 x 2.5 cm. one side rough & one side smooth., analog oscilloscope 20 mhz two channel 4 trace monochrome display 1 general portable rugged including features of component tester and in built frequency counter 2 bandwidth dc to 20 mhz 3d b 3 of channels two channels 4 deflection coefficient in calibrated steps from 5 mv to 5 v cm 5 rise time 17 point 5 ns 6 variable hold off for stable triggering 7 input impedance 1 mohm 25 pf 8 time base coefficients 18 calibrated steps 0 point 5microsec per cm to 0 point 2 sec cm with 5 magnifier to 100ns cm 9 trigger system automatic and normal level adjustable 10 source ch i ch ii alt line external 11 slope positive negative 12 coupling ac dc gnd 13 sensitivity 5 mm 14 trigger bandwidth 40 mhz 15 horizontal deflection dc 2 point 3 mhz 3db bandwidth 16 x to y mode phase shift 3 degree up to 60 khz 17 frequency counter range 20 hz to 30 mhz in built 18 computer interface usb 19 resolution 10 hz 10 khz 20 sensitivity 0 to 5v by div 21 attenuation 1 ratio 1 and 1 ratio 20 22 max input voltage 300 v rms cat ii 23 crt 140 mm rectangular with internal graticule and p31 phosphor 0 point 8 mm green colour plexiglass 24 calibrator operator 1 khz square wave 0 point2 vpp for probe compensation 25 z modulation ttl level 26 power supply 230 v plus minus 10 percent 50 hz ac supply component tester built in single touch, micrometer outside 50 to 75 mm l c 0 point 01 mm carbide tipped on anvil and spindle measuring face with spindle lock setting spanner and test piece 50 mm made of alloy steel complete in box with master, micrometer outside 75-100 mm, least count 0.01mm, carbide tipped on anvil &spindle measuring face, with spindle lock, setting spanner & test piece 75 mm, made of alloy steel complete in box with master., flaring tool set single type for tube 4 point 7 to 16 mm o d block and cone made of alloy steel and hard tempered nickel chrome plated able to flaring 1 by 2 inch 7 by 16 inch 1 by 4 inch 3 by 16 inch 3 by 8 inch and 5 by 8 inch o d, piston ring compressor 50 to 150 mm 2 1 by 2 inch wide spring bands equally distributes tension for easy compression for use on all passenger vehicles, pliers combination 200 mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, pliers nose 150mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, drill machine portable electrical 15 mm capacity a c single phase input full load 235 watt rpm 2800 and standard length supply cable and key, prick punch 150mm knurled body made from tool steel tip ground and heat treated, punch number 4 mm made from tool steel hardened set containing set of 9 piece 0 to 9 in suitable container, rivet sets snap and dolly combined 3 mm 4 mm 6 mm hand operated mabe drop forgd steel, scraper flat 250mm made from tool steel tip hardened and ground with wooden handle, scraper half round 20mm made from tool steel tip hardened and ground with wooden handle, scraper triangular 250mm made from tool steel tip hardened and ground with wooden handle, scriber with universal scribes block and accessories, dies set of stock and dies metric dies 3 4 5 6 8 10 12 14 16 and 18 set of 10 made from alloy tool steel dies circular split pattern type with suitable die stock with suitable dies handle dies hardened and tempered complete set in box, heavy duty cast iron body blade length600mm blade material d2 table size 450 mm into 600 mm back gauge attachment table 2t slot paddle spring operated, sheet metal gauge made from alloy steel steel graduation in both system british and metric, tinmans shear 300 mm made from drop forge steel cutting edge hard and tempered, soldering copper hatchet type 500 gms, solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated size 1 by 2 inch accuracy 0 point 0002 inch material made of high quality alloy steel precision ground and hardened product includes one pair of 1 inch into 6 into 1 by 2 into one pair of 1 to 1 by 2 inch into 6 into 1 by 2 inch one pair of 1 to 1 by 4 inch into 6 into 1 by 2 inch one pair of 1 to 3 by 4 inch into 6 into 1 by 2 inch application to be used in setting up work for drilling and milling, spanner clyburn 150mm. made from forged carbon steel. phosphate finish, spanner t flex for screwing up and unscrewing in inaccessible position and size 6 8 10 12 14 set of 5 pcs, spanner or wrench adjustable 150mm. standard pattern selected, made from forged steel heat treated, spark lighter friction type suitable for gas lighting, spark plug spanner size14 into 18 mm made from forged carbon steel, steel rule 150mm metric english both graduation made of stainless steel with conversion table engraved, straight edge 600 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, straight edge 1200 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, tachometer counting type display 5 digit lcd display accuracy plus minus 0 point 05 percent plus 1 digits rpm test range 2 to 99 999 rpm count range 1 to 99 999 counter resolution 0 point 1 rpm 2 to 999 point 9 rpm 1 rpm over 1000 rpm sampling time 0 point 5 sec over 120 rpm detecting distance 50 to 500 mm, this model which will give a complete idea of tandem master cylinder in vehicle and it s function the working model of tandem master cylinder assembly consisting of following minimum parts and practically demonstrable brake disc assembly one caliper assembly brake pad tandem master cylinder with vacuum booster vacuum pump brake hoses oil reservoir with oil with brake pedal features the model will be mounted on m s stand with good quality paint applications suitable sectioned to demonstrate the internal construction diagram details printed on to a colourful panel operating manual will be provided., taps and dies set b.a. 0 to 10 circular split pattern die & hand tap set of 3 piece made from alloy tool steel with suitable die stock and tap handle. taps and dies hardened & tempered. complete set in box, taps and dies b s w 1 by 4 5 by 16 3 by 8 inch 7 by 16 1 2 5 by 8 3 4 inch 7 by 8 1 inch set of 9 made from alloy tool steel dies circular split pattern type with suitable die stock hand tap set of 3 piece and tap handle taps and dies hardened and tempered complete set in box, tap and dies set metric size 03 to 24 mm 3 4 5 6 8 10 12 14 16 20 22 24 mm set of 12 made from alloy tool steel dies hand circular split pattern type with die stocks tap set having three piece taps with suitable tap handle and according to size taps and dies hardened and tempered complete set in box, taps and die set b s f by 4 5 by 16 3 by 8 inch 7 by 16 1 by 2 9 by 16 5 by 8 3 by 4 7 by 8 1 inch set of 10 made of alloy tool steel tap set of 3 piece circular split pattern die set tap wrenches and die stocks taps and dies hardened and tempered complete set in box, taps and dies width worth fine 1 by 8 inch 3 by 16 inch 3 by 8 inch 1 by 4 inch 5 by 16 inch 7 by 16 inch 1 by 2 inch 5 by 8 inch 3 by 4 inch 1 inch set of 10 made from alloy tool steel dies circular split pattern type with die stock hand tap set of 3 pieces with suitable tap handle. tap and dies hardened and tempered complete set in box, timing lighter with neon bulb for setting of all kind of petrol engine timing illumination angle approx 15 degree strobe tube high intensity xenon tube with cable used for checking ignition timing of petrol engine easily operate on 12v ignition systems 12 volt battery operated focused lens should provide light for high visibility of timing mark suitable for petrol carstwo wheelers handle design be more comfortable and easy to operate manufactured by standard company provided with suitable woodenplastic metal box, torque wrench 5 to 35 nm force, adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 12 to 68 nm force adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 50 to 225 nm force, adjustable by turning knurled handle barrel type rod form chrome plated. brake over type, tyre pressure gauge with holding nipple for measuring 0 to 160 lb by sq inch and 0 to 12kgf by sq cm of tyre pressure, universal puller for removing pulleys bearings, v block 75 into 38 mm pair with clamps v block pair with one clamps 75 into 38 into 50 mm by 75 into 50 into 50 mm made from close grain c i workshop grade, valve lifter valve spring for lifting & realizing of spring automatic ratchet lock c type reversible jaw adaptor for multi valve engines capacity 45 to 145mm throated clearance 250mm big window jaw adaptor for easy replacement of valve collects, valve spring compressor universal suitable for various cylinder head engine models, vernier calliper 300 mm length with metric and inch scale l c 0 point 02 mm four way quadric measurement type made from stainless chrome steel micro lapped hardened and tempered in box, automotive water pump of any multi cylinder water cooled engine for dismantling and assembling colored with attractive color. good finish the model will be fitted on suitable plywood sheet and constructional diagram details printed on to a colourful panel with details of applications, wire gauge made from alloy steel, gauge size 0 to 36 swg graduation in metric, bench vices 12cm jaw body made from close grain sg iron and serrated alloy steel jaw jaw heat treated spindle handle dia grater than equal 10 mm and closed on both end unbrakable materials screw materials en 24, engine type 3 cylinder inline common rail turbo diesel iron block air conditioned type displacement 1500 cc rear wheel drive water cooled engine fuel system common rail direct injection body two box five door wagon transmission type 5 speed manual suspension front independent with coil spring rear independent with coil spring steering type power assisted steering power window all four windows reverse gear sensors. anti theft device gprs inbuilt turning diameter 11 point 6 m ground clearance 180 mm wheel base 2680 mm fuel tank 60 litre s standard accessories owner s manual bs vi with abs and speed limiter, an arbor press is a small hand-operated press. it is typically used to perform smaller jobs such as staking riveting installing configuring and removing bearings and other press fit work removable machined steel anvil provides accurate work support in for slot positions automation grade manual material iron weight 30 to 50 kg usage application industrial capacity 2 ton, exhaust gas analyzer petrol arai approved to check construction of co2 o2 and hc and nox 1 construction of carbon monoxide range 0 to 9 point 999 percent resolution 0 point 01 percent 2 co2 carbon dioxide range 0 t
Agency / Dept :
department of technical education DTE
Due Date :
Jul 30, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Pneumatic Rivet Hammer. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Pneumatic Rivet Hammer sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Pneumatic Rivet Hammer Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Pneumatic Rivet Hammer, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Pneumatic Rivet Hammer Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Pneumatic Rivet Hammer Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Pneumatic Rivet Hammer.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Pneumatic Rivet Hammer depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Pneumatic Rivet Hammer Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Pneumatic Rivet Hammer bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Pneumatic Rivet Hammer. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Pneumatic Rivet Hammer, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Pneumatic Rivet Hammer, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Pneumatic Rivet Hammer?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Pneumatic Rivet Hammer tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Pneumatic Rivet Hammer?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Pneumatic Rivet Hammer, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Pneumatic Rivet Hammer is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All