sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

20Latest Pneumatic grinding machine Tenders List

Latest Pneumatic grinding machine Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Pneumatic grinding machine tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Pneumatic grinding machine tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Pneumatic grinding machine Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Pneumatic grinding machine tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Pneumatic grinding machine Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Pneumatic grinding machine Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Pneumatic grinding machine Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Pneumatic grinding machine tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Pneumatic grinding machine Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Pneumatic grinding machine sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Pneumatic grinding machine tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Pneumatic grinding machine tenders.

Is EMD mandatory for all Pneumatic grinding machine tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Pneumatic grinding machine work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Pneumatic grinding machine tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Pneumatic grinding machine Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16812310
Location : jodhpur , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for cut , file flat 300 mm second cut , file flat 200 mm bastard , file flat 300 mm bastard , file swiss type needle set of 12 , file half round 250 mm second cut , file half round 250 mm bastard , file round 250 mm bastard , file hand 150 mm second cut , file card wire brush , oil can 250 ml , plier combination insulated 150 mm , wooden handle forged soldering iron copper bit , blow lamp 500 ml , spanner double ended set of 8 pcs , spanner adjustable 150 mm , interchangeable ratchet socket set with 12 mm driver , double ended tubular box spanner set with tommy bar , glass magnifying 75 mm , clamp tool maker 50 mm , clamp tool maker 75 mm , c-clamp 100 mm , c-clamp 200 mm , reamer hand set pin taper straight flute , reamer machine parallel helical flute , scraper flat 150 mm , scraper triangular 150 mm , scraper half round 150 mm , chisel cold 9 mm x150 mm cross cut , chisel cold 9 mm x 150 mm diamond , chisel cold flat 9 mm x 100 mm , chisel cold 9 mm x 100 mm round nose , drill chuck 12 mm with key , pipe wrench 400 mm , pipe vice 100 mm , adjustable pipe die set b.s.p , wheel dresser , vice machine 100 mm jaw swivel base , vice machine 125 mm swivel base , sleeve drill morse , vice bench 150 mm jaw , bench working 2400 x 1200 x 900 mm , almirah 1800 x 900 x 450 mm , lockers with 12 drawers standard size , metal rack 1820 x 900 x 450 mm , instructor table , instructor chairs , black board with easel , fire extinguisher , fire buckets with stand , vice machine 100 mm jaw , wing compass 300 mm , hammer hand 1 kg. with handle , torque wrench 14 to 68 nm ratchet type , power tools for fastening capacity 10-18mm , different profile gauges plate type for demonstration , knurling tool diamond , knurling tool straight and diagonal , indexable boring bar with inserts , temperature gauge range , dowel pin straight , standard tap screws , lapping plate dia , metric drill gauge , letter drill gauge , number drill gauge , cast iron globe valve flanged type , c.i. sluice gate valve flanged type , stop cock , slip-on forged steel flange , pipe threading die with handle , pulleys for v-belt or flat belt , v- belt and flat belt , washer, clutch, keys, jib, cotter and circlips , hollow punch , bearing different types , lifting sling , bearing extractor , pulley extractor , trammel 300 mm , punch prick , mallet , aviation snip straight cut 300 mm , hammer flat headed with handle , hammer planishing , snip bent left cut 250 mm , stake hatchet with leg , stake grooving , gauge slip metric as johnson set , gauge snap go and not go 25 to 50 mm by 5mm set of 6 pcs , gauge plug single ended 5 to 55 by 5 mm set of 11 piece , gauge telescopic 8 to 150 mm , dial test indicator on stand , sine bar 125 mm , dial vernier caliper universal type , screw thread micrometer , depth micrometer , digital vernier caliper , digital micrometer , comparator gauge , engineer try square , surface roughness comparison , vernier bevel protractor , carbide wear block , lathe tools h.s.s. , lathe tools bit , arm strong type tool bit holder , stilson wrenches , pipe cutter wheel type , pipe bender spool type with stand manually , adjustable pipe chain tong to take pipes , spanner adjustable , s.s. and s.c. centre lathe , drilling machine pillar sensitive , drilling machine bench sensitive , d.e. pedestal grinding machine , transformer welding set 300 amps , welding cable , lugs for cable , earth clamps , arc welding table , oxy- acetylene gas welding set , gas welding table with, lab of fitter trade, steel rule 150mm with metric and british graduation, try square 150mm blade, caliper inside 150mm spring, caliper 150mm hermaphrodite spring type, caliper outside 150mm spring, divider spring joint 150mm, scriber 150mm multiple 5mm, punch centre 120mm multiple 10mm, screw driver 150mm multiple 6mm, chisel cold flat 20mm multiple 150mm, hammer ball peen 450 gm, hammer ball peen220 gm, file flat 250 mm second cut, file flat 250 mm smooth, file half round 150 mm second cut, hacksaw frame fixed 300mm, safety goggles plain, punch dot 100 mm, steel rule graduated both in metric and english unit, straight edge steel, spirit level 300 mm, stud extractor, combination set 300 mm, micrometer outside 0 to 25 mm, micrometer outside 25 to 50 mm, micrometer outside 50 to 75 mm, micrometer inside with extension rods, vernier caliper 150 mm, vernier height gauge 300 mm, vernier bevel protractor blade with acute angle attachment, screw pitch gauge, wire gauge metric standard, surface plate 600 multiple 600 mm c.i. granite with stand and cover, marking table 900 multiple 900 multiple 900 mm mild steel, universal scribing block 220 mm, v-block pair 150 multiple 100 multiple 100 mm with clamp, angle plate 150 multiple 150 multiple 250 mm, punch letter set, punch number set, portable hand electric drill machine 0 to 13 mm capacity, drill twist straight shank 3 to 13 mm by 0.5 mm, drill twist taper shank 8 mm to 20 mm by 0.5 mm, taps and dies complete set in a box, taps and dies complete set in box set of 05, file knife edge 150 mm smooth, file feather edge 150 mm smooth, file triangular smooth 200 mm, file round 200 mm second cut, file square 250 mm second cut, gauge feeler, file triangular 200 mm second cut, file flat 300 mm second cut, file flat 200 mm bastard, file flat 300 mm bastard, file swiss type needle set of 12, file half round 250 mm second cut, file half round 250 mm bastard, file round 250 mm bastard, file hand 150 mm second cut, file card wire brush, oil can 250 ml, plier combination insulated 150 mm, wooden handle forged soldering iron copper bit, blow lamp 500 ml, spanner double ended set of 8 pcs, spanner adjustable 150 mm, interchangeable ratchet socket set with 12 mm driver, double ended tubular box spanner set with tommy bar, glass magnifying 75 mm, clamp tool maker 50 mm, clamp tool maker 75 mm, c-clamp 100 mm, c-clamp 200 mm, reamer hand set pin taper straight flute, reamer machine parallel helical flute, scraper flat 150 mm, scraper triangular 150 mm, scraper half round 150 mm, chisel cold 9 mm x150 mm cross cut, chisel cold 9 mm x 150 mm diamond, chisel cold flat 9 mm x 100 mm, chisel cold 9 mm x 100 mm round nose, drill chuck 12 mm with key, pipe wrench 400 mm, pipe vice 100 mm, adjustable pipe die set b.s.p, wheel dresser, vice machine 100 mm jaw swivel base, vice machine 125 mm swivel base, sleeve drill morse, vice bench 150 mm jaw, bench working 2400 x 1200 x 900 mm, almirah 1800 x 900 x 450 mm, lockers with 12 drawers standard size, metal rack 1820 x 900 x 450 mm, instructor table, instructor chairs, black board with easel, fire extinguisher, fire buckets with stand, vice machine 100 mm jaw, wing compass 300 mm, hammer hand 1 kg. with handle, torque wrench 14 to 68 nm ratchet type, power tools for fastening capacity 10-18mm, different profile gauges plate type for demonstration, knurling tool diamond, knurling tool straight and diagonal, indexable boring bar with inserts, temperature gauge range, dowel pin straight, standard tap screws, lapping plate dia, metric drill gauge, letter drill gauge, number drill gauge, cast iron globe valve flanged type, c.i. sluice gate valve flanged type, stop cock, slip-on forged steel flange, pipe threading die with handle, pulleys for v-belt or flat belt, v-belt and flat belt, washer, clutch, keys, jib, cotter and circlips, hollow punch, bearing different types, lifting sling, bearing extractor, pulley extractor, trammel 300 mm, punch prick, mallet, aviation snip straight cut 300 mm, hammer flat headed with handle, hammer planishing, snip bent left cut 250 mm, stake hatchet with leg, stake grooving, gauge slip metric as johnson set, gauge snap go and not go 25 to 50 mm by 5mm set of 6 pcs, gauge plug single ended 5 to 55 by 5 mm set of 11 piece, gauge telescopic 8 to 150 mm, dial test indicator on stand, sine bar 125 mm, dial vernier caliper universal type, screw thread micrometer, depth micrometer, digital vernier caliper, digital micrometer, comparator gauge, engineer try square, surface roughness comparison, vernier bevel protractor, carbide wear block, lathe tools h.s.s., lathe tools bit, arm strong type tool bit holder, stilson wrenches, pipe cutter wheel type, pipe bender spool type with stand manually, adjustable pipe chain tong to take pipes, spanner adjustable, s.s. and s.c. centre lathe, drilling machine pillar sensitive, drilling machine bench sensitive, d.e. pedestal grinding machine, transformer welding set 300 amps, welding cable, lugs for cable, earth clamps, arc welding table, oxy-acetylene gas welding set, gas welding table with positioner, welding torch tips, trolley for gas cylinders, hammer chipping 300g, gloves leather, leather apron, spindle key for cylinder valves, welding torches, welding goggles, welding helmet, tip cleaner, pneumatic trainer kit, hydraulic trainer kit
Agency / Dept :
department of technical education DTE
Due Date :
Sep 07, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16664093
Location : krishnagar , west bengal
Source : GEM Tenders
LIVE TENDER
tender for workshop outfit pneumatic trainer kit each consisting of the following matching components and accessories , box drawing instrument , protractor celluloid , scale card board , scales plotting box wood 6 metric scales , set square transparent , set square celluloid , template architects and builders , geometrical models wooden plastic , templates circle ellipse furniture etc , french curves , flexible curves , radius curve metric , brass parallel rulers in a case , calculator scientific non programmable , proportional dividers , land measuring chain , ranging rod wooden fitted iron shoe , prismatic compass with stand , telescopic alidade , dumpy level with all accessories , transit theodolite with stand with all accessories , instrument for total station with latest modelwith all accessories , caliper outside spring joint , caliper inside spring joint , caliper odd leg firm joint , steel rule , scriber , hammer ball peen , centre punch , prick punch , divider spring joint , hammer copper brass , micrometer outside , micrometer inside , gauge feeler , gauge radius set , plain ring and plug gauge , wheel dresser hunting on type with star cutter , morse taper plug and ring gauge , sine bar with centers , morse taper , tap and die set , tap and die , reamer machine , parting tool holder with h s s blade , boring tool holder , angle plate , spirit level , tool maker s button , combination drill centre drill , st locker with drawer pigeonholes , angle gauge for tool grinding , hand chaser , tool cemented carbide assorted shaped external for steel turning , thread plug gauge , thread ring gauge , machine chaser , lathe mandrels diff types , coventry type die head self opening , collapsible tap with attachment , bore dial gauge stems , digimatic electronic vernier caliper , digimatic electronic outside micrometer , multimedia based simulator for cnc technology , universal weld measuring gauge , auto darkening helmet with desirable specification , pedestal grinder fitted with coarse and medium grain size grinding wheels dia 300 mm with desirable specification , work bench , oxy acetylene gas cutting blow pipe , fire buckets with stand , portable abrasive cut off machine , suitable gas cutting table , welding simulators for smaw gtaw gmaw , water cooled induction brazing machine , plastic machine with hot air gun uses of pepp and pvc sheet or pipe , swaging and flooring tool kit 45 degree tubing , die penetrant testing kit , anti spatter spray can desirable , gmaw torch nozzle tip , tig torch ceramic nozzle , tungsten electrode , copper filler wire , flux for brass , flux for copper , steel tape , steel measuring scale , marking knife , try square , bevel square , carpenter marking gauge , carpenter mortiser gauge , metal smoothing plane , firmer chisel , contraction measuring scale , rip saw , ball pein hammer , country drill with bow ball bearing type , breast drill , snip straight , oil cans , carpenter vice , saw sharpening vice , blower , grease gun , portable circular saw machine , portable planning machine , portable jig saw machine , portable router machine , set of turning tools for above lathe machine , drills chuck , portable disc sander , electric heater , universal wood working machine , small type compressor with spray painting system , ohm meter , digital multi meter , a c voltmeter , milli voltmeter , ammeter mc analog , digital wattmeter , power factor meter digital , magnetic flux meter , lux meter , megger , wheat stone bridge with galvanometer and battery , phase sequence indicator , temperature controlled soldering iron , current transformer , potential transformer , solar panel with battery , d c compound generator with control panel including fitted rheostat voltmeter ammeter and breaker , ac phase wound slip ring motor with starter switch , universal motor with starter switch universal motor along with control panel , single phase transformer core type air cooled , three phase transformer shell type oil cooled with delta star , used dc generators series shunt and compound type for overhauling practice , a c series type motor , manual coil winding machine , fully automatic ceiling fan stator winding machine , stepper motor with digital , single phase shaded pole induction motor , smart meter , ev charger , ev charger home , hss taper shank twist drills (short series) (q3), workshop outfit, as per specification
Agency / Dept :
department of industrial training
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
73.76L
View Documents
T18 Ref No : 16450020
Location : kolkata , west bengal
Source : GEM Tenders
LIVE TENDER
tender for split air conditioner, wall mount type (v3) isi marked to is 1391 (part 2) (q2) , ss and sc centre lathe all geared for fitter trade , pillar type drilling machine , drilling machine bench , cut section model for pneumatic components of pneumatic trainer kit , cut-section models for hydraulic components of hydraulic trainer kit , power saw machine hydraulic feed system , ss and sc centre lathe all geared for machinist trade , tool and cutter grinder , drilling machine pillar , radial drill , universal milling machine , surface grinding machine , cylindrical grinder , single door direct cool refrigerator carrying with hfc and hc , frost free refrigerator , three four door refrigerator inverter type , core drill machine , bench drilling machine , window ac , duct able split ac one and half ton , cassette air conditioner , rotary hermetic compressor , deep freezer , display cabinet , water cooler storage type , ice candy plant , air conditioning direct system , package ac , bus ac tutorial model , automatic ice cube mc , storage type water cooler hot and cold , visi cooler , vrf vrv unit with two indoor units , split ac inverter technology , working model of air brake assembly , cut section of cross ply and radial tyres , cut section working model of automatic transmission gear box , demonstration board of mpfi system , drum brake assembly in working condition , front axle rzeeppa joint with stand for dismantling and assembly , tyre and split rim wheel assembly , tube tyre vulcanizing machine , diesel engine six cylinder in running condition , working condition of petrol mpfi engine assembly with fault simulation board , ss and sc centre lathe all geared for machinist grinder , pedestal grinder fitted with coarse and medium grain size grinding wheels , ag 4 grinder , portable drilling machine , simulators for mr mixed reality vr virtual reality , water cooled induction brazing machine , plastic machine with hot air gun , swaging and flooring tool kit 450 tubing , arbor press hand operated 2 ton capacity , automotive diesel smokemeter , diesel engine crdi 4 stroke dismantling and assembling with swivelling stand , drilling machine bench to drill up to 12mm dia along with accessories , grinding machine general purpose de pedestal with 300 mm dia wheels rough and smooth , hydraulic jack hi lift type 3 ton capacity and 5 ton capacity , multi scan tool , working condition of diesel engine crdi 4 stroke engine assembly with fault simulation board, workshop outfit, as given in specification
Agency / Dept :
department of industrial training
Due Date :
Sep 01, 2026 (1 day left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15691512
Location : bathinda , punjab
Source : GEM Tenders
tender for boroscope camera with hod , torque wrench ratchet type light duty , pneumatic gun with socket set light duty , injector tester diesel vehicle , heavy duty screw driver set , impact screw driver set , filter clamp heavy duty , hydraulic fork stacker , glass cutter tool , magnet remover puller hero honda , magnet remover puller royal enfield , nose plier internal external , dc test lamp , socket set 4mm to 14 mm , 2 in 1 long screw driver , vernier caliper 300 mm , electronics grinding machine 150w, boroscope camera with hod, torque wrench ratchet type light duty, pneumatic gun with socket set light duty, injector tester diesel vehicle, heavy duty screw driver set, impact screw driver set, filter clamp heavy duty, hydraulic fork stacker, glass cutter tool, magnet remover puller hero honda, magnet remover puller royal enfield, nose plier internal external, dc test lamp, socket set 4mm to 14 mm, 2 in 1 long screw driver, vernier caliper 300 mm, electronics grinding machine 150w
Agency / Dept :
indian army
Due Date :
Jun 15, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15929016
Location : unnao , uttar pradesh
Source : GEM Tenders
corrigendum tender for gd m.c head lower bell , neauprene seal,hydrotesting unit , l bend for filling gun , gd.pt ms sliding bush , screw for pneumatic cylinder , supporting rod ss 40x300 for gd.pt , ss locking bush for clamping rod , pneumatic cylinder shaft 50x160 short thread , pneumatic cylinder shaft 50x160 long thread , v belt a 66,b62,b66 antistatic , pneumatic cylinder norgren.festo 63x25 , lot adopter , plummer block ucp 212 ntn bearing , vibration rubber damper , upper head brass for antennae valve ,norgren , manual sealing gun , antennae valve ,norgren , wd 40 spray , thread locker , 40x400 and 40x400 cylinder guide rail , lens for optical fibre z017400 , coil for metalwork valve , pu seal for gd lower bell , optical fibre cable,sick , push button air valve ,pneumax , spring for centering gun , allen csk bolt 6x50mm,10x30mm ht tvs , chain lock make diamond , pneumatic cylinder shaft 50x80 short thread , roller clamping arm for gd and pt , hot air sealing gun straight type , base of gd ,central section ms , ht bolt 8x40 mm,8x75mm , hexagonal bolt with nut and washer 10x40mm , nut bolt with washer 12 x40 mm , hexagonal bolt with nut and washer 16x75mm , antennae wire , vision unit antennae rod , flameproof sealing unit sensor , yoke plate , clp rd sds drill bit hammer 6x160,12x260,16x350mm , it hss drill p.s 8,10,12 mm , welding electrode 3to 15mm ,manglam , seal kit ck 95 40 , teflon roller with dual bearing , flexible coipling 16x1to 5 ,for introduction unit , pt gun bottom ss head to 6 hole of 8 mm , sensor cable to 1,3,5,7,10mtr , allen csk bolt 0.5x2mm ht tvs , wheel for carousel , welding rod ss to esab make , reflector to white , load cell cable mk 4 , load cell cable to check scale , ss wheel to telescopic boom , mounting for gd cylinder , nylock nut to 6,8 ,10mm , ms anchor fastener 16x150, 12x150 , frl 0.5 inch , pneumatic single pilot valve 2.5 , clamping guide ms block , linear bearing , guide rod ejection unit,introduction unit , conveyor bend teflon , seal kit 50x160 to norgren , elbow connector, size 0.25inchx4mm , elbow connector,size 0.25inchx6mm , elbow connector,size 0.25inchx8mm , elbow connector,size 0.125inchx4mm , elbow connector,size 0.125inchx6mm , elbow connector,size 0.125inchx8mm , elbow connector,size 0.5inchx8mm , elbow connector,size 0.5inchx10mm , elbow connector,size 0.5inchx12mm , reducer,pu, size 6to 4mm,8to 4mm , reducer,pu, size 8to 6mm , reducer,pu, size 10to 8mm , reducer,pu, size 12to 8mm , connector,straight, size 4x4mm,8x8mm , connector,straight, size 6x6mm , connector,straight, size 10x10mm , connector,straight, size 12x12mm , t connector,size 4x4x4mm , t connector,size 6x6x6mm , t connector,size 8x8x8mm , t connector,size 10x10x10mm , t connector,size 12x12x12mm , wll24to 2x430501 ,optical sensor , pu tube 10mm and 12 mm , pu tube 8 mm , pu tube 6 mm , pu tube 4 mm , hot air sealing gun baliga and flameproof type , pressure gauge 2inch ,0to 10 kg per cm2 micro , pressure gauge 4inch ,0to 10 kg per cm2 micro, consumables spares, 8 teeth sprocket with teflon bush, drive unit, pneumatic cylinder 40x400 metalwork flat shaft, 14 teeth sprocket, conveyor, pillow block bearing, drive chain riveted pin, counter weight, chain set, conveyor chain ,riveted type, double stopper set, conveyoyor uhmwear strip, 40x10x2500 mm, taper strip 1850x32x1.625 mm, taper strip 1550x32x1.625 mm, spider l 150, hacksaw blade,hss,12x0.5in ,mirinda, hacksaw frame, electrode, weld,e6013,3.15mm, grinding wheel ag4 packet, cutting wheel ag4 packet, bolt,hex,ms, 1.5inx10mm,2inx10mm, 16mmx4in,1inx4mm,1inx8mm,1.5inx8mm, tipped drill bit,8,10,12mm packet, drill bit,grouting,hss,m10,m12,m16, 10mm,12mm,16mm grouting bolts, cable tie, size 150mm ,200mm, 250mm, 300mm packet, wear strip, soldering iron rod, brass block gdpt, rectangular block gdpt, shaft 60 mm od x 850 mm length, duplex chain 3 mtr, pneumatic cylinder d 40 l 300 metalwork with flat shaft, introduction cylinder d 50 l 450 norgren, clamping cylinder d 50 l 160 norgren, stopper cylinder back mounting norgren, arms set carousel, gas stop valve service kit, wear strip 50x6 mm 50 mtr roll, toggle joint, under cover gi for conveyor, coupling patta, pusher rubber pad,with ss bush, spindle for pt gun,pressure drop, eye bolt for filling machine, pneumatic cylinder 50x80,norgren, piston rod 40x300,hexagon, piston rod 40x400,hexagon, u seal kit hexagon, deadman switch industrial 2.5 0.25inch ,dp055061, wt 24 2x 400 diffuse sensor ,sick, pencil inductive sensor, gd m.c head lower bell, neauprene seal,hydrotesting unit, l bend for filling gun, gd.pt ms sliding bush, screw for pneumatic cylinder, supporting rod ss 40x300 for gd.pt, ss locking bush for clamping rod, pneumatic cylinder shaft 50x160 short thread, pneumatic cylinder shaft 50x160 long thread, v belt a 66,b62,b66 antistatic, pneumatic cylinder norgren.festo 63x25, lot adopter, plummer block ucp 212 ntn bearing, vibration rubber damper, upper head brass for antennae valve ,norgren, manual sealing gun, antennae valve ,norgren, wd 40 spray, thread locker, 40x400 and 40x400 cylinder guide rail, lens for optical fibre z017400, coil for metalwork valve, pu seal for gd lower bell, optical fibre cable,sick, push button air valve ,pneumax, spring for centering gun, allen csk bolt 6x50mm,10x30mm ht tvs, chain lock make diamond, pneumatic cylinder shaft 50x80 short thread, roller clamping arm for gd and pt, hot air sealing gun straight type, base of gd ,central section ms, ht bolt 8x40 mm,8x75mm, hexagonal bolt with nut and washer 10x40mm, nut bolt with washer 12 x40 mm, hexagonal bolt with nut and washer 16x75mm, antennae wire, vision unit antennae rod, flameproof sealing unit sensor, yoke plate, clp rd sds drill bit hammer 6x160,12x260,16x350mm, it hss drill p.s 8,10,12 mm, welding electrode 3to 15mm ,manglam, seal kit ck 95 40, teflon roller with dual bearing, flexible coipling 16x1to 5 ,for introduction unit, pt gun bottom ss head to 6 hole of 8 mm, sensor cable to 1,3,5,7,10mtr, allen csk bolt 0.5x2mm ht tvs, wheel for carousel, welding rod ss to esab make, reflector to white, load cell cable mk 4, load cell cable to check scale, ss wheel to telescopic boom, mounting for gd cylinder, nylock nut to 6,8 ,10mm, ms anchor fastener 16x150, 12x150, frl 0.5 inch, pneumatic single pilot valve 2.5, clamping guide ms block, linear bearing, guide rod ejection unit,introduction unit, conveyor bend teflon, seal kit 50x160 to norgren, elbow connector, size 0.25inchx4mm, elbow connector,size 0.25inchx6mm, elbow connector,size 0.25inchx8mm, elbow connector,size 0.125inchx4mm, elbow connector,size 0.125inchx6mm, elbow connector,size 0.125inchx8mm, elbow connector,size 0.5inchx8mm, elbow connector,size 0.5inchx10mm, elbow connector,size 0.5inchx12mm, reducer,pu, size 6to 4mm,8to 4mm, reducer,pu, size 8to 6mm, reducer,pu, size 10to 8mm, reducer,pu, size 12to 8mm, connector,straight, size 4x4mm,8x8mm, connector,straight, size 6x6mm, connector,straight, size 10x10mm, connector,straight, size 12x12mm, t connector,size 4x4x4mm, t connector,size 6x6x6mm, t connector,size 8x8x8mm, t connector,size 10x10x10mm, t connector,size 12x12x12mm, wll24to 2x430501 ,optical sensor, pu tube 10mm and 12 mm, pu tube 8 mm, pu tube 6 mm, pu tube 4 mm, hot air sealing gun baliga and flameproof type, pressure gauge 2inch ,0to 10 kg per cm2 micro, pressure gauge 4inch ,0to 10 kg per cm2 micro, pressure gauge 2inch ,0to 28 kg per cm2 micro, pressure gauge 4inch ,0to 28 kg per cm2 micro, pressure gauge 2inch ,0to 16 kg per cm2 micro, pressure gauge 4inch ,0to 16 kg per cm2 micro, pressure gauge 2inch ,0to 21 kg percm2 micro, pressure gauge 4inch ,0to 21 kg per cm2 micro, pressure gauge 6inch ,0to 21 kg per cm2 micro, pressure gauge 2inch ,0to 42 kg per cm2 micro, pressure gauge 4inch ,0to 42 kg per cm2 micro, temperature gauge 4inch ,0 to 200 degree celsius micro, pressure gauge 6inch ,0 to160 kg per cm2 micro, vacuum gauge 4inch ,0 to760 mm per hg micro, hose parker 2000mm 0.5 inch, hose parker 2000mm 1 inch, hose parker 900mm and 1000mm 0.5 inch, display cuc mark iv, keypad rubber type mkiv, magnetic sensor pneumatic, cap hammering head with white teflon, carousal drive belt anti static, pressure switch flp smart tech, mechanical tool master set,400to 500 pcs include torque wrench ,allen key set ,pliersetc., conveyor c channel, bolt, hex,ms,3inx8mm tvs, load cell 200kg, 5m cable flintec, supporting rod ss 40x400 for gd.pt, cuc card mark iv advanced, cap hammering head with white teflon, carousal drive belt, pressure switch flp, solenoid valve rotex, socket 1 inch thread, socket 0.5 inch thre, hex nipple 1x1 inch and 0.5x0.5 inch, adapter 1x0.75 inch and 0.5x0.375 inch, adapter 1x0.5 inch, adapter 0.5x0.25 inch, stud 30to 32 and 24to 27, stud 21 to 23, belt jockey compressor b72, plug,male transmitter 110703, plug,female transmitter,110704, ucp 209 plumber block ,ntn, brass block for gd.pt machine, sealing cup flameproof straight type, straight fitting 0.375x8 mm, vision unit usb hub,121227, pressure transmitter head, a.d convertor, t connector in gd.pt, pr module controller in carousel mk1v advance vfd, hasm hose pie 1 mtr and 3 mtr, board, part no 130034 pitxe38,qc 1to 91ghz,168201301377
Agency / Dept :
hindustan petroleum corporation limited HPCL
Due Date :
Jun 24, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15763051
Location : unnao , uttar pradesh
Source : GEM Tenders
tender for gd m.c head lower bell , neauprene seal,hydrotesting unit , l bend for filling gun , gd.pt ms sliding bush , screw for pneumatic cylinder , supporting rod ss 40x300 for gd.pt , ss locking bush for clamping rod , pneumatic cylinder shaft 50x160 short thread , pneumatic cylinder shaft 50x160 long thread , v belt a 66,b62,b66 antistatic , pneumatic cylinder norgren.festo 63x25 , lot adopter , plummer block ucp 212 ntn bearing , vibration rubber damper , upper head brass for antennae valve ,norgren , manual sealing gun , antennae valve ,norgren , wd 40 spray , thread locker , 40x400 and 40x400 cylinder guide rail , lens for optical fibre z017400 , coil for metalwork valve , pu seal for gd lower bell , optical fibre cable,sick , push button air valve ,pneumax , spring for centering gun , allen csk bolt 6x50mm,10x30mm ht tvs , chain lock make diamond , pneumatic cylinder shaft 50x80 short thread , roller clamping arm for gd and pt , hot air sealing gun straight type , base of gd ,central section ms , ht bolt 8x40 mm,8x75mm , hexagonal bolt with nut and washer 10x40mm , nut bolt with washer 12 x40 mm , hexagonal bolt with nut and washer 16x75mm , antennae wire , vision unit antennae rod , flameproof sealing unit sensor , yoke plate , clp rd sds drill bit hammer 6x160,12x260,16x350mm , it hss drill p.s 8,10,12 mm , welding electrode 3to 15mm ,manglam , seal kit ck 95 40 , teflon roller with dual bearing , flexible coipling 16x1to 5 ,for introduction unit , pt gun bottom ss head to 6 hole of 8 mm , sensor cable to 1,3,5,7,10mtr , allen csk bolt 0.5x2mm ht tvs , wheel for carousel , welding rod ss to esab make , reflector to white , load cell cable mk 4 , load cell cable to check scale , ss wheel to telescopic boom , mounting for gd cylinder , nylock nut to 6,8 ,10mm , ms anchor fastener 16x150, 12x150 , frl 0.5 inch , pneumatic single pilot valve 2.5 , clamping guide ms block , linear bearing , guide rod ejection unit,introduction unit , conveyor bend teflon , seal kit 50x160 to norgren , elbow connector, size 0.25inchx4mm , elbow connector,size 0.25inchx6mm , elbow connector,size 0.25inchx8mm , elbow connector,size 0.125inchx4mm , elbow connector,size 0.125inchx6mm , elbow connector,size 0.125inchx8mm , elbow connector,size 0.5inchx8mm , elbow connector,size 0.5inchx10mm , elbow connector,size 0.5inchx12mm , reducer,pu, size 6to 4mm,8to 4mm , reducer,pu, size 8to 6mm , reducer,pu, size 10to 8mm , reducer,pu, size 12to 8mm , connector,straight, size 4x4mm,8x8mm , connector,straight, size 6x6mm , connector,straight, size 10x10mm , connector,straight, size 12x12mm , t connector,size 4x4x4mm , t connector,size 6x6x6mm , t connector,size 8x8x8mm , t connector,size 10x10x10mm , t connector,size 12x12x12mm , wll24to 2x430501 ,optical sensor , pu tube 10mm and 12 mm , pu tube 8 mm , pu tube 6 mm , pu tube 4 mm , hot air sealing gun baliga and flameproof type , pressure gauge 2inch ,0to 10 kg per cm2 micro , pressure gauge 4inch ,0to 10 kg per cm2 micro, consumables spares, 8 teeth sprocket with teflon bush, drive unit, pneumatic cylinder 40x400 metalwork flat shaft, 14 teeth sprocket, conveyor, pillow block bearing, drive chain riveted pin, counter weight, chain set, conveyor chain ,riveted type, double stopper set, conveyoyor uhmwear strip, 40x10x2500 mm, taper strip 1850x32x1.625 mm, taper strip 1550x32x1.625 mm, spider l 150, hacksaw blade,hss,12x0.5in ,mirinda, hacksaw frame, electrode, weld,e6013,3.15mm, grinding wheel ag4 packet, cutting wheel ag4 packet, bolt,hex,ms, 1.5inx10mm,2inx10mm, 16mmx4in,1inx4mm,1inx8mm,1.5inx8mm, tipped drill bit,8,10,12mm packet, drill bit,grouting,hss,m10,m12,m16, 10mm,12mm,16mm grouting bolts, cable tie, size 150mm ,200mm, 250mm, 300mm packet, wear strip, soldering iron rod, brass block gdpt, rectangular block gdpt, shaft 60 mm od x 850 mm length, duplex chain 3 mtr, pneumatic cylinder d 40 l 300 metalwork with flat shaft, introduction cylinder d 50 l 450 norgren, clamping cylinder d 50 l 160 norgren, stopper cylinder back mounting norgren, arms set carousel, gas stop valve service kit, wear strip 50x6 mm 50 mtr roll, toggle joint, under cover gi for conveyor, coupling patta, pusher rubber pad,with ss bush, spindle for pt gun,pressure drop, eye bolt for filling machine, pneumatic cylinder 50x80,norgren, piston rod 40x300,hexagon, piston rod 40x400,hexagon, u seal kit hexagon, deadman switch industrial 2.5 0.25inch ,dp055061, wt 24 2x 400 diffuse sensor ,sick, pencil inductive sensor, gd m.c head lower bell, neauprene seal,hydrotesting unit, l bend for filling gun, gd.pt ms sliding bush, screw for pneumatic cylinder, supporting rod ss 40x300 for gd.pt, ss locking bush for clamping rod, pneumatic cylinder shaft 50x160 short thread, pneumatic cylinder shaft 50x160 long thread, v belt a 66,b62,b66 antistatic, pneumatic cylinder norgren.festo 63x25, lot adopter, plummer block ucp 212 ntn bearing, vibration rubber damper, upper head brass for antennae valve ,norgren, manual sealing gun, antennae valve ,norgren, wd 40 spray, thread locker, 40x400 and 40x400 cylinder guide rail, lens for optical fibre z017400, coil for metalwork valve, pu seal for gd lower bell, optical fibre cable,sick, push button air valve ,pneumax, spring for centering gun, allen csk bolt 6x50mm,10x30mm ht tvs, chain lock make diamond, pneumatic cylinder shaft 50x80 short thread, roller clamping arm for gd and pt, hot air sealing gun straight type, base of gd ,central section ms, ht bolt 8x40 mm,8x75mm, hexagonal bolt with nut and washer 10x40mm, nut bolt with washer 12 x40 mm, hexagonal bolt with nut and washer 16x75mm, antennae wire, vision unit antennae rod, flameproof sealing unit sensor, yoke plate, clp rd sds drill bit hammer 6x160,12x260,16x350mm, it hss drill p.s 8,10,12 mm, welding electrode 3to 15mm ,manglam, seal kit ck 95 40, teflon roller with dual bearing, flexible coipling 16x1to 5 ,for introduction unit, pt gun bottom ss head to 6 hole of 8 mm, sensor cable to 1,3,5,7,10mtr, allen csk bolt 0.5x2mm ht tvs, wheel for carousel, welding rod ss to esab make, reflector to white, load cell cable mk 4, load cell cable to check scale, ss wheel to telescopic boom, mounting for gd cylinder, nylock nut to 6,8 ,10mm, ms anchor fastener 16x150, 12x150, frl 0.5 inch, pneumatic single pilot valve 2.5, clamping guide ms block, linear bearing, guide rod ejection unit,introduction unit, conveyor bend teflon, seal kit 50x160 to norgren, elbow connector, size 0.25inchx4mm, elbow connector,size 0.25inchx6mm, elbow connector,size 0.25inchx8mm, elbow connector,size 0.125inchx4mm, elbow connector,size 0.125inchx6mm, elbow connector,size 0.125inchx8mm, elbow connector,size 0.5inchx8mm, elbow connector,size 0.5inchx10mm, elbow connector,size 0.5inchx12mm, reducer,pu, size 6to 4mm,8to 4mm, reducer,pu, size 8to 6mm, reducer,pu, size 10to 8mm, reducer,pu, size 12to 8mm, connector,straight, size 4x4mm,8x8mm, connector,straight, size 6x6mm, connector,straight, size 10x10mm, connector,straight, size 12x12mm, t connector,size 4x4x4mm, t connector,size 6x6x6mm, t connector,size 8x8x8mm, t connector,size 10x10x10mm, t connector,size 12x12x12mm, wll24to 2x430501 ,optical sensor, pu tube 10mm and 12 mm, pu tube 8 mm, pu tube 6 mm, pu tube 4 mm, hot air sealing gun baliga and flameproof type, pressure gauge 2inch ,0to 10 kg per cm2 micro, pressure gauge 4inch ,0to 10 kg per cm2 micro, pressure gauge 2inch ,0to 28 kg per cm2 micro, pressure gauge 4inch ,0to 28 kg per cm2 micro, pressure gauge 2inch ,0to 16 kg per cm2 micro, pressure gauge 4inch ,0to 16 kg per cm2 micro, pressure gauge 2inch ,0to 21 kg percm2 micro, pressure gauge 4inch ,0to 21 kg per cm2 micro, pressure gauge 6inch ,0to 21 kg per cm2 micro, pressure gauge 2inch ,0to 42 kg per cm2 micro, pressure gauge 4inch ,0to 42 kg per cm2 micro, temperature gauge 4inch ,0 to 200 degree celsius micro, pressure gauge 6inch ,0 to160 kg per cm2 micro, vacuum gauge 4inch ,0 to760 mm per hg micro, hose parker 2000mm 0.5 inch, hose parker 2000mm 1 inch, hose parker 900mm and 1000mm 0.5 inch, display cuc mark iv, keypad rubber type mkiv, magnetic sensor pneumatic, cap hammering head with white teflon, carousal drive belt anti static, pressure switch flp smart tech, mechanical tool master set,400to 500 pcs include torque wrench ,allen key set ,pliersetc., conveyor c channel, bolt, hex,ms,3inx8mm tvs, load cell 200kg, 5m cable flintec, supporting rod ss 40x400 for gd.pt, cuc card mark iv advanced, cap hammering head with white teflon, carousal drive belt, pressure switch flp, solenoid valve rotex, socket 1 inch thread, socket 0.5 inch thre, hex nipple 1x1 inch and 0.5x0.5 inch, adapter 1x0.75 inch and 0.5x0.375 inch, adapter 1x0.5 inch, adapter 0.5x0.25 inch, stud 30to 32 and 24to 27, stud 21 to 23, belt jockey compressor b72, plug,male transmitter 110703, plug,female transmitter,110704, ucp 209 plumber block ,ntn, brass block for gd.pt machine, sealing cup flameproof straight type, straight fitting 0.375x8 mm, vision unit usb hub,121227, pressure transmitter head, a.d convertor, t connector in gd.pt, pr module controller in carousel mk1v advance vfd, hasm hose pie 1 mtr and 3 mtr, board, part no 130034 pitxe38,qc 1to 91ghz,168201301377
Agency / Dept :
hindustan petroleum corporation limited HPCL
Due Date :
Jun 22, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16499899
Location : pune , maharashtra
Source : GEM Tenders
tender for industrial cotton waste , n95 nose mask , dust bin heavy duty 35 ltr , wet mop , dry mop , soft broom , hard broom , door mat 2 x 3 ft , baking soda , super absorbent cotton mop , wet and dry cotton mop , wet and dry cotton floor mop pad , hand wash , bucket , floor cleaning liquid dome , hose clip , teflon taper , single point diamond dresser , star grinding wheel dresser , abrasive stick grinding wheel dresser , nylon full hand gloves , industrial hand glove cotton , industrial polish paper , wax candle , round polishing belt , oil stone cuboids , sediment filter , pre carbon filter , double push connector , connecting tube , black board choke , industrial blue used to convey mandatory action , steel body air gun , pneumatic air circulation in pine , steel wire brush for file cleaning , painting brush , screw driver , belt for belt spanner high grade cotton mesh strap , oil filter adjustable wrench , rechargeable torch for rough dressing , battery aaa, aa , induction hot plate , heater 2 kw , 2 burner gas stove , copper strip fail , acrylic rod , vinegar , thermal water bottle , jar for liquid measurement , litmus paper for ph value measurement , shoe rack , bubble sheet roll , hss tap extractor set , hss screw extractor set , wd 40 spray , fevicol , velvet display cloth , pneumatic debarring machine , debarring tool set, cotton waste white superior quality free fromany synthetic impurities 100% cotton knot free, dust free, n95 nose mask., dust bin heavy duty 35 ltr as per iso 9001-2025 plastic, wet mop 24 inch, dry mop 24 inch, soft broom (length- min100 cm, handle- pvc-coated metal), hard broom (length- min120 cm, handle- rust-resistant stainless steel with a hanging loop), door mat 2 x 3 ft (anti-skid rubber or pvc backing, and moisture-trapping), baking soda (density-63 to 66 lb/ft cube (approx 1.0 to 1.05 g/cm cube), super absorbent 100% cotton yarn mop with telescopic handle length 4 to 5 ft., wet & dry cotton mop with telescopic handle (18 inch x 16inch x5cm), wet & dry cotton floor mop pad (18 inch x 16inch x5cm), hand wash (ph level 5.5 - 6.5), bucket 5 ltr (hdpe plastic material), floor cleaning liquid dome x 1 ltr., stainless steel hose clip 1/2 inch (hexagon screw head type), stainless steel hose clip 1/4 inch (hexagon screw head type), stainless steel hose clip 1 inch (hexagon screw head type), stainless steel hose clip 4 inch (hexagon screw head type), stainless steel hose clip 5 inch (hexagon screw head type), teflon tape 10 nos in 1 box (width- min 12 mm), single point diamond dresser 0.5 mm (dia 10mm), single point diamond dresser 1 mm (dia 10mm), star grinding wheel dresser with handle for rough dressing., abrasive stick grinding wheel dresser (25m x 25m x 10mm) standard., nylon full hand gloves 22 inch, industrial hand gloves cotton knitted, industrial polish paper 420 no (grit no-420), industrial polish paper 320 no (grit no-320), industrial polish paper 220 no (grit no-220), industrial polish paper 120 no (grit no-120), industrial polish paper 80 no (grit no-80), wax candle, round polishing belt-grit number-120,180 length 900mm, width 100mm.(10 nos of each grit), oil stone cuboids 10 x 10 x 120 mm (coarse grit-120 to 320, fine grit-800 to 3000)., oil stone cuboids dia 100 mm l-100 mm(coarse grit-120 to 320, fine grit-800 to 3000)., oil stone cuboids 150 x 50 x 25 mm (coarse grit-120 to 320, fine grit-800 to 3000)., sediment filter for uv water purifier (suitable for uv water purifier, product code- gwpdhacuv00000 and name- ag absolute hot n ambient and cold uv eurka forbes ltd), pre carbon filter for uv water purifier(suitable for uv water purifier , product code- gwpdhacuv00000 and name- ag absolute hot n ambient and cold uv eurka forbes ltd), 1/4 inch double push connector for uv water purifier (suitable for uv water purifier , product code- gwpdhacuv00000 and name- ag absolute hot n ambient and cold uv eurka forbes ltd), 1/4 inch connecting tube for uv water purifier.(suitable for uv water purifier , product code- gwpdhacuv00000 and name- ag absolute hot n ambient and cold uv eurka forbes ltd), black board chock., industrial blue used to convey mandatory action., steel body air gun(pnumatic air gun ss body), pneumatic air circulation in pipe id 8mm and od 12mm, pneumatic air circulation in pipe id 10mm and od 14mm, pneumatic air circulation in pipe id 12mm and od 16mm, steel wire brush for file cleaning (overall length in minimum 235, bristal trim length- min 15mm, head face-min 30mm, gauge- 0.15 to 0.20mm, hardend steel wire)., painting brush no. 02 (2 inch ), screw driver 15 inch, screw driver 18 inch, belt for belt spanner high grade cotton mesh strap (40mm width x 5mm thick)., oil filter adjustable wrench (0 to 200 mm), rechargeable torch 20w, 4000mah., battery aaa, aa., induction hot plate 2100 watt., heater 2 kw (immersion heater), 2 burner gas stove ( body thickness min 4mm ss material), copper strip foil (difference thicknesses- 0.05 mm to 0.10mm,0.15mm and 0.20mm (1.25 kg for each thickness)., acrylic rod (fully transparent) dia 50 mm., vinegar 1 ltr., thermal water bottle 1 ltr melton., 1/2 ltr jar for liquid measurement., litmus paper for ph value measurement., shoe rack 10 x 10 x 1 ft with metal., bubble sheet roll 40 gsm 1 mtr x 50 mtr., hss tap extractor set m2-m16., hss screw extractor set (2mm-12mm)., wd 40 spray 420 ml as per iso 9001., fevicol., velvet display cloth 300 gsm., pneumatic deburring m/c with grinding tool set (capacity should be 200w, rpm 22000, air pressure more than 120 psi)., deburring tool set diamond file(50 pieces diomand bur set and 10 pieces 160 length).
Agency / Dept :
defence research and development organisation DRDO
Due Date :
Aug 18, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16830339
Location : visakhapatnam , andhra pradesh
Source : GEM Tenders
tender for extended spindle die grinder , die grinder kit , heavy duty needle scaler , scaler needles , 14v cardless drill or driver kit drilling machine , pipe wrench 4 inch opening jaw width , angular grinder 4 and half inch machine , adhasive disc grinding cutter , emery disc wired wheels and wire brush , cable reels extended cable box 15 mtrs , lead lamp plastic cage 12 mts , mechanical pullers 2 and 3 legs 175 reach , pneumatic 3 leg puller 3 jaw 175 reach , spirit level box section , fixed head torque wrench 20 to 110 fjw 150 , bearing separators upto 150mm capacity , 4 inch pneumatic angular grinder , half inch drilling machine , magnatic base drilling compact machine drill size upto 25mm , measuring tap with abs 5 meters and 2 meters , bosch battery drilling machine drilling size upto 13mm , spanner power tool kit with extended rod upto 32mm hexagonal, procurement of tools for machine shop, extended spindle die grinder, die grinder kit, heavy duty needle scaler, scaler needles, 14v cardless drill or drive kit drilling machine, pipe wrench 4 inch opening jaw width, angular grinder 4 and 1 by 2 inch machine, adhasive disc grinding cutter, emery disc wired wheels and wire brush, cables reels extended cable box 15 mtrs, lead lamp plastic cage 12 mts, mechanical pullers 2 and 3 legs 175 reach, pneumatic 3 leg puller 3 jaw 175 reach, spirit level box section, fixed heat torque wrench 20 to 110 fjw 150, bearing separators upto 150mm capacity, 4 inch pneumatic angular grinder, half inch drilling machine, magnatic base drilling compact machine drill size upto 25mm, measuring tape with abs 5 meters and 2 meters, bosch battery drilling machine drill size upto 13mm, spanner power tool kit with extended rod upto 32mm hexagonal
Agency / Dept :
indian navy
Due Date :
Aug 18, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16898557
Location : visakhapatnam , andhra pradesh
Source : GEM Tenders
tender for procurement of tools for machine shop extended spindle die grinder , die grinder kit , heavy duty needle scaler , scaler needles , 14v cardless drill or driver kit drilling machine , pipe wrench 4 inch opening jaw width , angular grinder 4 and half inch machine , adhasive disc grinding cutter , emery disc wired wheels and wire brush , cable reels extended cable box 15 mtrs , lead lamp plastic cage 12 mts , mechanical pullers 2 and 3 legs 175 reach , pneumatic 3 leg puller 3 jaw 175 reach , spirit level box section , fixed head torque wrench 20 to 110 fjw 150 , bearing separators upto 150mm capacity , 4 inch pneumatic angular grinder , half inch drilling machine , magnatic base drilling compact machine drill size upto 25mm , measuring tap with abs 5 meters and 2 meters , bosch battery drilling machine drilling size upto 13mm , spanner power tool kit with extended rod upto 32mm hexagonal, procurement of tools for machine shop, extended spindle die grinder, die grinder kit, heavy duty needle scaler, scaler needles, 14v cardless drill or drive kit drilling machine, pipe wrench 4 inch opening jaw width, angular grinder 4 and 1 by 2 inch machine, adhasive disc grinding cutter, emery disc wired wheels and wire brush, cables reels extended cable box 15 mtrs, lead lamp plastic cage 12 mts, mechanical pullers 2 and 3 legs 175 reach, pneumatic 3 leg puller 3 jaw 175 reach, spirit level box section, fixed heat torque wrench 20 to 110 fjw 150, bearing separators upto 150mm capacity, 4 inch pneumatic angular grinder, half inch drilling machine, magnatic base drilling compact machine drill size upto 25mm, measuring tape with abs 5 meters and 2 meters, bosch battery drilling machine drill size upto 13mm, spanner power tool kit with extended rod upto 32mm hexagonal
Agency / Dept :
indian navy
Due Date :
Aug 20, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16446212
Location : visakhapatnam , andhra pradesh
Source : GEM Tenders
tender for procurement of tools for machine shop extended spindle die grinder , die grinder kit , heavy duty needle scaler , scaler needles , 14v cardless drill or driver kit drilling machine , pipe wrench 4 inch opening jaw width , angular grinder 4 and half inch machine , adhasive disc grinding cutter , emery disc wired wheels and wire brush , cable reels extended cable box 15 mtrs , lead lamp plastic cage 12 mts , mechanical pullers 2 and 3 legs 175 reach , pneumatic 3 leg puller 3 jaw 175 reach , spirit level box section , fixed head torque wrench 20 to 110 fjw 150 , bearing separators upto 150mm capacity , 4 inch pneumatic angular grinder , half inch drilling machine , magnatic base drilling compact machine drill size upto 25mm , measuring tap with abs 5 meters and 2 meters , bosch battery drilling machine drilling size upto 13mm , spanner power tool kit with extended rod upto 32mm hexagonal, procurement of tools for machine shop, extended spindle die grinder, die grinder kit, heavy duty needle scaler, scaler needles, 14v cardless drill or drive kit drilling machine, pipe wrench 4 inch opening jaw width, angular grinder 4 and 1 by 2 inch machine, adhasive disc grinding cutter, emery disc wired wheels and wire brush, cables reels extended cable box 15 mtrs, lead lamp plastic cage 12 mts, mechanical pullers 2 and 3 legs 175 reach, pneumatic 3 leg puller 3 jaw 175 reach, spirit level box section, fixed heat torque wrench 20 to 110 fjw 150, bearing separators upto 150mm capacity, 4 inch pneumatic angular grinder, half inch drilling machine, magnatic base drilling compact machine drill size upto 25mm, measuring tape with abs 5 meters and 2 meters, bosch battery drilling machine drill size upto 13mm, spanner power tool kit with extended rod upto 32mm hexagonal
Agency / Dept :
indian navy
Due Date :
Aug 14, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Pneumatic Grinding Machine. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Pneumatic Grinding Machine sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Pneumatic Grinding Machine Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Pneumatic Grinding Machine, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Pneumatic Grinding Machine Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Pneumatic Grinding Machine Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Pneumatic Grinding Machine.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Pneumatic Grinding Machine depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Pneumatic Grinding Machine Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Pneumatic Grinding Machine bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Pneumatic Grinding Machine. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Pneumatic Grinding Machine, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Pneumatic Grinding Machine, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Pneumatic Grinding Machine?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Pneumatic Grinding Machine tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Pneumatic Grinding Machine?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Pneumatic Grinding Machine, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Pneumatic Grinding Machine is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All