Search Tenders

Filters

Reset All

Tender Status

All India TendersNew TendersLive TendersArchive Tenders

T18 Ref No

All States

All Cities

All Agencies

Tender ID

Due Date

Tender Value

Tender Source (GeM, Cppp & Others)

Tender Type

10Latest Nickel iron batteries Tenders List

Name: Tender18 Infotech Private Limited
Address: B-913/914, Sivanta One The Business Park,Opp. Bank of Baroda, Pritam Nagar, Paldi ,, Ahmedabad, 380007, IN
Telephone: 7069661818
Price range: 00

Latest Nickel iron batteries Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Nickel iron batteries tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Nickel iron batteries tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.

Real-Time Nickel iron batteries Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Nickel iron batteries tenders into:

Supply Tenders – BOQs and specifications sourced from GeM and PSUs
Service Tenders – NITs and scope of work from CPPP and state portals
EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.

Comprehensive Sources of Nickel iron batteries Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
Railways & Transport – IREPS and Metro Rail projects
Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
Defense & Strategic Sectors – MES and DRDO tenders
State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.

Step-by-Step Guide to Participate in Nickel iron batteries Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

Financial turnover requirements (30–50% of tender value)
Past experience (2–3 similar projects)
Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

Digital Signature Certificate (Class 3 DSC)
GST, PAN, MSME/Udyam registration
EMD (Earnest Money Deposit) or exemption proof
Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

Analyze item-wise pricing
Ensure competitive yet sustainable quotes
Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.

Why Tender18 is a Trusted Platform for Nickel iron batteries Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Nickel iron batteries tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.

Growth of Nickel iron batteries Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Nickel iron batteries sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

L1 Purchase
Direct Procurement
MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts

Frequently Asked Questions (SEO Optimized)

How can I get daily Nickel iron batteries tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Nickel iron batteries tenders.

Is EMD mandatory for all Nickel iron batteries tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Nickel iron batteries work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Nickel iron batteries tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.

Get Expert Support for Nickel iron batteries Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

Tender discovery & analysis
Documentation support
Bid strategy & submission
GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16956433

Location : mathura , uttar pradesh

Source : GEM Tenders

LIVE TENDER

tender for h1 8040-000184 adhesive-synthetic-resin-araldite-ay- 105 , j1 5110-000561 axes pick head , g2 3439-000116 rod welding aluminium magnesium alloy y- , g2 3439- 000095 rod welding copper 3.15mm , g2 3439-000087 rod welding iron cast super silicon 3.15 , g2 3439- 000098 rod welding nickel bronze 3.15mm , g2 3439- 000101 rod welding silicon bronze 1.60mm , g2 3439-000103 rod welding silicon bronze 5.00mm , g2 3439-000104 rod welding silicon bronze 6.30mm , g2 3439-000093 rod welding steel mild 5.00mm , g2 3439-000094 rod welding steel mild 6.30mm , g2 3439-000107 rod welding zn base 3.15mm , g2 3439- 000222 solder alluminium beedee , y3 6135-000004 battery 1.5 vdc size aa, ord stores, h1 8040-000184 adhesive-synthetic-resin-araldite-ay-105, j1 5110-000561 axes pick head, g2 3439-000116 rod welding aluminium magnesium alloy y-, g2 3439-000095 rod welding copper 3.15mm, g2 3439-000087 rod welding iron cast super silicon 3.15, g2 3439-000098 rod welding nickel bronze 3.15mm, g2 3439-000101 rod welding silicon bronze 1.60mm, g2 3439-000103 rod welding silicon bronze 5.00mm, g2 3439-000104 rod welding silicon bronze 6.30mm, g2 3439-000093 rod welding steel mild 5.00mm, g2 3439-000094 rod welding steel mild 6.30mm, g2 3439-000107 rod welding zn base 3.15mm, g2 3439-000222 solder alluminium beedee, y3 6135-000004 battery 1.5 vdc size aa

Agency / Dept :

indian army

Due Date :

Sep 04, 2026 (4 days left)

Tender Value :

Refer Document

View Documents

T18 Ref No : 15832910

Location : bareilly , uttar pradesh

Source : GEM Tenders

tender for physics and chemistry and biology science lab equipment as per enclose list - beaker , chart stand, conical flask, digital balance, dropping bottle, forceps, funnel, heater, hot plate, human skeleton , leaf clamp apparatus, measuring cylinder 50ml 100ml 250ml, micro viewers, microscope compound,microscope dissecting, morter and pestle, petri dish, pipette graduated 10ml, reagent bottle, skeleton joints , slide box, test tube holders, test tube stand, watch glass, water bath, wash bottle, pipette stand, all pins, burette 50ml, burette 50 ml, perforated beaker, capillary tube, test tube holders, tripod stand, thermometer, trough, wire gauge, burette stand, blade for section cutting, laboratory coat, scissors 4, scissors 6, scalpel, charts controlled pollination, and pedigree , charts roundworm, earthworm and tapeworm , charts pigeon, rat scoliosis, starfish frog and lizard camel and cockroach , charts mendels inheritance and the life cycle of the mosquito , charts racemose inflorescence cymose inflorescence , charts modifications of roots and stem , charts posters portraits of scientists , models claws and beaks forelimbs modifications brain ear and eye , models human torso model and human skeleton , models root nodules of leguminous plants , models cuscuta on host, lichens homologous and analogous organs , slide permanent asexual reproduction plant tissues animal tissues , slide permanent stages of mitosis meiosis t s of the testis t s of ovaries, slide permanent pollen tube germination t s blastula, slide permanent disease causing agents bread mould amoeba hydra, specimens only plant specimens which are in the syllabus are, specimens aquatic plants xerophytic plants monocot plants, specimens dicot plants moss liverworts fern, specimens stem root and leaf modifications, specimens plant diseases mushroom, charts ascaris entamoeba plasmodium any fungus causing ringworm, charts bacteria oscillatoria spirogyra rhizopus mushroom, charts yeast liverwort moss fern pine one monocotyledonous plant, charts one dicotyledonous plant and one lichen amoeba, charts hydra liver fluke ascaris leech earthworm prawn, charts silkworm honey bbee snail starfish shark, charts rohu frog lizard pigeon and rabbit, acetic acid, acetone, alcohol, aluminum sulphate, benedicts solution, muslin cloth, brushes, matchbox, ammonium solution, acetocarmine powder, cavity block, cavity slide, cellotape paper tape, chromatography paper, cobalt chloride, cork, cotton roll, dettol, dropper, dusters, filter paper, formaldehyde, glycerine, grease, boric acid, monocot stem, ethanol, fehling solution a, fehling solution b, glucose, lens cleaning solution, lens cleaning paper, magnesium sulphate, onion root tips, plain stickers, robert solution, sodium chloride, sodium hypobromide, hydrochloric acid, detergent, iodine, methylene blue, micro cover slip, micro glass slides, million s reagent, needle, nitric acid, petroleum ether, potassium nitrate, safranin solution, bile salts, soap, starch, starch iodide paper, sucrose, test tube boiling, test tube ordinary, test tube graduated, aluminum foil, barium chloride, dicot stem, urea, seeds pulses, ph paper, balance chemical, blow pipe iron, burette stand wooden, test tube brush, cork borer iron, cork presser iron, crucible tongs iron, charcoal slab borer iron, crucible silica, deflagrating spoon iron, distilation apparatus iron, drying cones iron, funnel stand or filter stand wooden, pestle and mortar, pinch cock iron, retort stand with ring and clamp, round file, sand bath, spirit lamp barss, stoves, test tube stand wooden, test tube holder iron, triangular stand iron, tripod stand iron, trough tin, wire gauze iron, weight boxes wooden, triangular clay pipes iron wire covered with clay, beaker, burettle, china dish, conical flasks, flasks r b and f b , funnel, gas jar or cylinder, glazed tile, measuring flasks, pipette, retort, thistle funnel, kipp s apparatus, watch glass, ammonium carbonate, ammonium chloride, ammonium sulfate, ammonium bromide, aluminum sulfate, iron sticks, potassium nitrite, ammonium oxalate, sodium thiosulphate, zinc sulfate, cobalt nitrate, sodium hydroxide, copper sulfate, potassium nitrate, oxalic acid, magnesium sulfate, magnesium chloride, ammonium phosphate, sodium chloride, potassium ferrocyanide k4fecn 6, ferrous sulfate, sodium bromide, ammonium ferrous sulfate, potassium dichromate, barium chloride, strontium nitrate, sodium sulfide na2s, potassium chromate, lead acetate, sodium sulfate, potassium iodide, lead nitrate, cedric ammonium nitrate, 2 and 4 dnp, universal indicator, ammonia solution nh4oh, phenol, aniline, bromine water, acetaldehyde, acetic acid, fehling solution a to b, acetone, carbon disulfide, phenolphthalein, nessler s reagent, ammoniumm olybdate, nickel carbonate, nickel sulfate, manganese chloride, calcium chloride, sodium bisulphate., cobalt acetate, chloroform, hydro chloric acid hcl, sulphuric acid h2so4, nitric acid hno3, ethanol, test tube 50 and 125mm, test tube holder thick brass, dropper glass 150mm, funnel 2, pipette 10ml bulb tube, conical flask 250ml, volume tric flask 100ml, filter paper , glass rod thick, plain white labels 2 and 1, sodium sulfite na2so3, picric acid, borax, cobalt glass, aluminum metal, spatula, bunsen burner, droppers, burettes 50ml, wire gauge, watch glass, spatula, tripod stand, burette stand, laboratory thermometer , ammeters different range, battery eliminator, daniell cell, drawing board, friction apparatus complete set with weight box, galvanometer, parallelogram apparatus, key one way, jockey pencil type, two way key, laclanche cell, meter bridge, multimeter digital, multimeter manual, magnetic compass, optical bench 1 meter long, prism indian glass, potentiometer, plier, cutter, screwdriver, scissor, resistance box 0.1 to 10 ohm, resistance box 1 to 10 ohms, resistance box 1 to 100 ohms, resistance box 1 to 1000 ohms, resistance box 1 to 100000 ohms, dry cell 10g chargeable, dry cell charger, helical spring apparatus with weights, rheostat, resistance coil different range 1 to 5 ohms, resonance apparatus, spherometer, screw gauge, wooden scale 1 to 50 cm and 1 to 100 cm, stopwatch, sonometer, sprit level, thermometer, tuning fork 250 hz and 480 hz and 512 hz withpad, vernier calliper, voltmeter different range, beakers, connecting wires, charts for display bio visuals, portraits as per choice, concave mirror, convex mirror, convex lens, concave lens, wedge knife edge for sonometer , glass slab, pendulum box, cork rubber 1.5 inches, hanger weights 500 gm, insulated copper wire, meter tape 1 to 100 meter, soldering iron, spring balance 0 to 250 gm, u shaped magnet, copper calorimeter, epidiascope, newton s disc, telescope, camera, barometer tube, lactometer, stove oil, electric bell, proof plane, binoculars, soldering rods, p n junction diode set up, laptop or desktop set as per enclosed specification, balance physical , boyle s law apparatus, fortnis barometer, metallic cylinders, metal sphere, sg bottles, grave sand apparatus, young s modulus, spectrometer, hydrometer, spirit level, potentiometer, silk and cat skin pieces, gold leaf electroscope, all pins 1.5 , drawing pins, thread rolls

Agency / Dept :

department of secondary education

Due Date :

Jan 25, 2025

Tender Value :

56L

View Documents

T18 Ref No : 15736028

Location : bardhaman , west bengal

Source : GEM Tenders

tender for terrain specific drone simulator training lab digitized lecture stand , ups 10 kva , computer set 12 gen 17 , printer a3 , laptops systems , drone battery charger , raspberry pi kits with sd card , pcb design setup ki cad , radio for simulator , 3d design software , arduino mega esp 32 and jumper wires set , display , goggle for simulator , digital air unit 5km , 3d printer bamboo lab p2s , 3d printer bamboo lab p1s , molicel p42a battery , endurance test machine , rig pid tuning 3 axis , motor thrust checker machine , assy stations , spot welding stn 709a with other access , 3d printer components pla cf tpu petg abs pla lw , 3 axis drone trg rig , trg drone , spare parts in bulk , furnishing fitments and hvacs , fpv drone sim , digital goggle , radio master pocket , prabal 3.0 counter drone jx sys , analog goggles , digital cam 10km, terrain specific drone simulator training lab, all-in-one smart lectern that integrates a pc interactive touchscreen audio system connectivity ports resolution full hd 1920 z 1080 pixels or 4k ultra hd operating system preinstalled windows or linux microphones gooseneck microphones on the stand accompanied by wireless cordless lapel or handheld microphones, high capacity heavy duty power backup system designed switches seamlessly to battery power without interrupting sensitive connected equipment, memory ram ddr4 up to 3200 mhz or ddr5 up to 4800mhz operating system pre installed with windows 11 home or pro wireless wi fi and bluetooth ports, handle documents up to 297mm x 420mm auto duplexing two sided printing robust adf interfaces ethernet lan wi fi direct,and usb 2.0 3.0 os compatibility compatible with windows 11 and macos, 16 gb 512 gb ssd windows 11 home 4 gb graphics nvidia ge force rtx 2050, brand hota model d6 ultra input voltage ac 100 240 v dc 6.5 30 v charge current 0.1 15 a x 2 lihv lipo life lion lixx1 6s niozn nicdnimh 1 16 s lead acid pb1 12s 2 24 v, board computer featuring a 1.4ghz 64 bit quad core processor 1gb lpddr2 ram and built in dual band 2.4ghz 5ghz wi fi along with bluetooth 4.2 it offers a 40 pin gpio header gigabit ethernet via usb 2.0 4 usb 2.0 ports making it suitable for hobbyist projects retro gaming and light computing tasks, ki cad is a open source electronic design automation eda software suite used for creating schematic diagrams and printed circuit board pcb layouts it is cross platform windows linux macos and supports up to 32 copper layers, making it suitable for complex professional electronics design, the radio master pocket is a compact portable 16 channel radio contr oller designed for fpv pilots featuring hall effect gimbals edgetx firmware and a foldable antenna, tinker cad is a browser based 3d designs and circuit simulation tool requiring no specialized hardware it functions on most computers laptops from the last 6 years with webgl support a minimum 864px key limits include a 2000x2000x2000 unit workspace and support for browsers like chrome 50 or safari 10 wide browser viewport, and a mouse or trackpad, micro controller microchip atmega 328p core architecture 8 bit avr risc clock speed 16 mhz via onboard ceramic resonator flash memory 32 kb total 0 point 5 kb utilized by the factory bootloader sram 2 kb for dynamic variable storage eeprom1 kb for non volatile parameter storage and some wires for connection, a 3.5 inch 480x320 pixel tft lcd touchscreen typically using the spi interface is a common and compact display option for the raspberry pi 3 3b it mounts directly onto the gpio pins making it ideal for small portable projects though it may have a lower refresh rate and require specific drivers, with comfortable face sponge and av in function separable design 5 inch screen can be used as small monitor on radio controller or with tripod hd high brightness 5inch lcd specially tuned for fpv racing, o4 video transmission system which can transmit thrilling real time 1080p footage at a smooth 100 fps from up to 6.2 miles away while flying the 12 cmos sensor can record 117 6 wide angle footage at up to 4k60 resolution captured on the modules built in 23gb of memory, 5 inch touchscreen 1080p ai camera and improved 8.5kg extrusion force it supports 300 c nozzle temps 600 mms speed and auto calibration for advanced materials with hardened steel components standard, 256x256x256mm build volume maximum speeds of 500mms all metal hot end advanced sensors for automatic calibration making it ideal for advanced materials like abs asa and petg, 21700 size 4500mah li ion cell for fpv drone, endurance & payload tester rig for military engine propeller validation measures actual thrust produced by motors/propellers, drone testing stand with 360 freedom and telescopic arm we are a leading manufacturer of the tabletop fixed drone testing stand designed to provide a versatile and secure platform for testing drones with complete 360 freedom of movement, this handy tool lets you check out your motor propeller combinations easily at home without needing to installation anything into a model until you ve finalized the setup the stand can handle a wide variety of motors and measure up to 5kg of thrust. high precision linear bearings and thrust sensor give accurate thrust readings down to the gram, soldering iron 60w or higher with adjustable temperature solder wire 60 40 rosin core tin lead is easiest to use flux soldering flux pen or paste hex driver set 1.5mm 2.0mm and 2.5mm metric nut driver 5.5mm and 8mm for prop nuts wire cutters snips small precision wire cutters tweezers fine tip for small wires multimeter for testing for short circuits smoke stopper to prevent burning components on first power up heat gun or lighter for heat shrink tubing thread locker loctite 243 blue to prevent motor screws from vibrating out prop wrench tool m5 prop tool anti static mat micro scope zip ties heat shrink bec capacitor etc, 10.5kw maximum high power farad capacitor spot welder designed for battery pack assembly and repair it features 99 adjustable power levels a color touchscreen and is capable of welding nickel sheets up to 0.4mm thick with 1750a maximum output, pla polylactic acid the most popular eco friendly and easiest to print best for prototypes decorative models and beginners polyethylene terephthalate glycol a versatile durable material combining the ease of pla with higher strength and heat resistance abs acrylonitrile butadiene styrene strong heat resistant and durable but harder to print due to warping common in functional parts thermoplastic polyurethane a flexible rubber like filament used for gaskets phonecases and soft components, large size suitable for 5 7 inch drone and fpv combat readiness trains soldiers for tactical drone operations in battlefield conditions cost effective reduces need for actual drone flights saving on hardware and maintenance costs, 5inc fpv drone with google radio battery charger best tuned for new fpn pilots flight time fo drone is 15 18min and range is aprox 1.5 km in lo, 5 or 7 fpv parts like frame motor stack elrs rx gps vtx cam antenna props battery straps etc, hardware durability and climate appropriate cooling, realistic fpv first person view drone simulator designed to teach beginners how to fly and allow veterans to practice without crashing real expensive hardware it simulates drone physics and offers deep customization enabling users to build and fly virtual drones with specific part, real view pip you can use the real view pip feature to view a picture in picture image within the goggles this allows you to view your surroundings without having to take off the headset adjustable diopter you dont need perfect vision to enjoy the goggles 3 thanks to built in diopter adjustment those who are nearsighted or farsighted can dial in a clear image the diopter can be adjusted from 6.0 to 2.0 d one tap defogging compensate for high humidity conditions and sudden changes in temperature with one tap defogging using this feature will defog the goggles 3s micro oled lenses letting you continue to enjoy a clear 1080p feed from your drone live feed monitoring using a wi fi enabled smartphone or tablet, portable and lightweight design with removable stick ends and foldable antenna features hall effect gimbals as standard for smooth centering & precise response built in led lights help visualize your switch positions sa & sd backlit lcd screen offering a perfect balance of size and functionality trim buttons for easy channel trimming external module bay compatible with radio master nano size modules and tbs nano crossfire nano tracer 2 stylish colors of charcoal & transparent version and optional case colors in blue pink green and orange to suit your style, full spectrum system supports both ac and dc power options navigations links communication links, the sky zone cobra sd goggles are the diversity version of the cobra s goggles and include a diversity receiver the goggles are 16 to 9 fpv goggles and have an lcd screen with vivid color and high luminance allowing pilots to see more details while racing pilots can wear glasses while using these goggles, range 10km 4k 120fps rec and 1080p 100fpv live

Agency / Dept :

indian army

Due Date :

Jun 22, 2026

Tender Value :

45L

View Documents

T18 Ref No : 16682148

Location : pushparajgarh , madhya pradesh

Source : GEM Tenders

tender for raw material - wooden screw , whitner , washers , varnish , ups 7.5 ah battery , transistor , transformer , timer , three phase wire , tag small , tag big , switch board , switch 2 way , switch 1 way , switch , steno notebook , staplier pin 24x6 , staplier machine handle type size 24x6 , stamp pad , stamp ink , spring washers , soldering lead , soldering flux , socket power , socket , smps , sketch pen , single core copper wire , short hand pencil , seek jadhu , sand paper , rubber , rj 45 connector , resistors , relay module , star delta timer din rail mounting 90 x 22.5 x 72 230 v ac , register 4 core , rccb , rawl plugs , ram , pvc copper insulated wire , pvc copper cable , pvc casing capping 1inch 25mm , push button switch , plug top , phynl goli 250grm , phynl , photo copy paper a4 size , phool jadhu , pencil cutter , pcb board , overload relay , nuts m3 to m6 , multi meter battery 9volt , ms round bar , ms flat , ms electrode 4mm , ms electrode 3.15mm , mouse , mcb , lugs and ferrules , lubricating oil , led bulb , led , lamp holder , keybord , junction box , insulation tape , insulation sleeves , insulation paper , indicator lamps , ics , hydrolic oil , hexzgonal milling cutter , harpick , hacksaw blade , gum 150ml , greash , glands , gear oil , fuse unit , floor acid , flexible wire , file cover , fevistick , ferrules , envelop a4 , envelop a3 , engine oil , engine coolent , emery paper , elcb , earthing set copper , earth electrode , duster , distribution board , diodes , din rail , battery water distilled water for use in battery , cutting oil , cotton waste , copper winding wire , contactor , connecting wires , conduit accessories , cmos battery , chalk , ceiling rose , cd marker , cat 6 cable , cast iron electrode 5mm , cast iron electrode 4mm , electrode cast iron 2.5mm , carbon paper a4 size , capacitors 2.5 mfd electrolytic and ceramic passive , cable tray , cable lugs , cable clips , bus bar , bridge rectifier , break oil , breadboard , binding thread , battery acid , battery , ball pen blue, red , power switch 16amp , power socket 16amp , modular board 4way , ups battery 26ah, wood screws 1inch fixing wood, plywood, paster boards solid stainless (100nos), wood screws 1.5inch fixing wood, plywood, paster boards solid stainless (100nos), wood screws 2inch fixing wood, plywood, paster boards solid stainless (100nos), wood screws 2.5inch fixing wood, plywood, paster boards solid stainless (100nos), wood screws 3inch fixing wood, plywood, paster boards solid stainless (100nos), correction pen whitener smudge free operation with unique squeeze control applicator precise whitener pen for correction, washer mild steel, can use in home, industrial, warnish 1 lit. insulating varnish fast drying golden - motor winding insulating varnish, msmf 7.2-12 12v 7.2ah sealed maintenance free vrla battery for ups, emergency lighting, medical equipment, telecom, weighing machines and power backup, transistor bc547 passive, two-terminal electrical components that limit or regulate the flow of electric current in a circuit, transistor bc548 passive, two-terminal electrical components that limit or regulate the flow of electric current in a circuit, electronic spices transformers 6-0-6 2amp ac current step down vertical mount electric power transformer (6-0-6 2amp), electronic spices transformers 12-0-12 2amp ac current step down vertical mount electric power transformer (12-0-12 2amp), programmable daily weekly digital lcd display control counter/time timer relay switch din, 3 core copper electrical wire 100 meter - 2.5 mm, up to 2500w - heavy duty round cable for domestic wiring and home appliances, white file tags/file laces (thick, 24 inch), modular socket extension ac switch board 15amp, switch two way 6a, 240v flush type switch, deluxe 100w sbl load, ip20, white, switch one way 6a, 240v flush type switch, deluxe 100w sbl load, ip20, white, mini toggle switch 2a 250v ac / 5a 120v ac, 2 position on-on spdt 3 pin panel mount metal lever switch for diy electronics, automotive and electrical projects, steno notebook shorthand writing notebook soft cover daily use for stenographers steno learning students, desk essentials 24x6 1m heavy duty steel wire staple pin zinc coated with rust free complete steel staple sturdy and durable for long time use, stapler machine handle type 24/6 all metal stapler, standard stapler with quick loading mechanism, sturdy and durable, stamp pad, large size, long lasting impression, large violet blue colour (size 15.7cm x 9.6cm) for sharp footprint, ideal for marking documents, stamp pad ink, 60/40 tin lead solder wire with rosin core for electrical soldering 0.8mm diameter, 35g, low melting point, smooth flow, high conductivity (0.8mm), solder flux for soldering flux paste for electronics rosin 2.12 oz, power socket 16 a twin socket, durable and stylish electrical outlet for home and office, white,, 5 pin socket 6a, 240v (modular type ) twin socket, durable and stylish electrical outlet for home and office, white,, computer smps power supply 450w 80mm smart silent cooling fan 8(6+2) pin pci-e built-in dual power protection (ps-0005a), 14 shades watercolour sketch pens brilliant and intense 14 colours unique push resisitant tip ventilated caps, pvc copper wire 0.75mm electrical wire, 90 meter fire resistant single core pvc insulated pure copper wire, anti rodent anti termite flexible wire for connections, steno pencils premium black and dark hexagonal body for strong grip and good handwriting free sharpener and eraser non-toxic, wet floor, garden, outdoor cleaning natural and pure bamboo seek coconut jhadu/brooms, sanding emery paper grit 100coarse brown sandpaper for wood, metal, walls and diy finishing medium size, emery material, paper backing, non-toxic dust free extra long eraser for clean and clear erasing stationery gift item for kids and students, cat6 rj45 pass through connectors gold-plated modular plugs for solid and stranded ethernet cable easy crimp network plug for cat6, cat5e, cat5 lan cable, resistors 100ohm passive, two terminal electrical components that limit or regulate the flow of electric current in a circuit, relay module board for pcb, star delta timer din rail mounting 90 x 22.5 x 72 230 v ac, case bound my notes 21x33 cm single line 400 pages, 63a 4-pole rccb 30ma residual current circuit breaker for shock and fire protection din rail mount reliable leakage protection for home, commercial and industrial use, rawl plug heavy duty plastic rawl plugs durable expansion anchors for plasterboard masonry brick and concrete wall fixings for screws, heavy duty rawl plugs for wall fixing, drilling and anchoring anti slip design, ram 8gb ddr3 1600mhz desktop ram (memory) u-dimm long-dimm dt pc3-1600 single channel memory with 3 years, pvc copper wire 1.5mm electrical wire, 90 meter fire resistant single core pvc insulated pure copper wire, anti rodent anti termite flexible wire for connections, pvc copper wire 2.5mm electrical wire, 90 meter fire resistant single core pvc insulated pure copper wire, anti rodent anti termite flexible wire for connections, pvc copper wire 4mm electrical wire, 90 meter fire resistant single core pvc insulated pure copper wire, anti rodent anti termite flexible wire for connections, pvc cassing capping 25 mm white pvc conduit pipe, for false ceiling, push buttons 1 green 1 red with 2 no 2nc three phase, plug top 6a, 3 pin, isi certified, sleek white finish, ideal for acs, geysers, washing machines, naphthalene balls for wardrobe clothes cupboard bathroom urinal damer goli sanitary cubes, mothballs odor remover air freshener, white pheny floor cleaner multi-purpose disinfectant liquid anti-bacterial surface cleaner for hospitals, homes and bathrooms, a4 size 70 gsm 500 sheets white paper, 1 ream for laserjet & inkjet printer fast drying both side print eco friendly colorlok (pack of 1) one ream, broom phool jhadu with natural mizoram long grass 21 inch metal handle stick for easy dust removal, strain reduction & floor cleaning, mini cutter, tough steel construction, anti-rust coated blades, ergonomic design, smooth cutting, anti-lock device, white, general purpose printed circuit board, breadboard stripboard diy design for engineers, industrial electrical thermal overload relay, hex head mild steel bolt with nut can use in home, industrial, 9v battery for multimeter 9 volt electronics battery best batteries for voltage testing device batteries for toys, mild steel alloy steel round bar 40mm diameter, mild steel alloy steel round bar 30mm diameter, mild steel alloy steel round bar 32mm diameter, mild steel alloy steel round bar 50mm diameter, mild steel alloy steel round bar 60mm diameter, ms flat (70x10)mm rectangular ms flat , for industrial, ms flat (50x10)mm rectangular ms flat , for industrial, arc welding electrode 4mm, arc welding electrode 3.15mm, comfort wired usb mouse, 3-button, 1000 dpi optical sensor, plug & play, for windows/mac, black, mcb single pole 6amp mini modular 06 amp single pole mcb isi marked single pole, mcb single pole 16amp mini modular 16 amp single pole mcb isi marked single pole, mcb single pole 32amp mini modular 32amp single pole mcb isi marked single pole, mcb single pole 63amp mini modular 63 amp single pole mcb isi marked single pole, terminals lugs for 10sqmm cable having 8mm stud hole ring terminal lugs wire, lubricating oil for general purpose, 9 watt led bulb cool day light b22 base, energy efficient led bulb for home and office, wide light spread, led r and g indication assorted colours with 220 ohm resistors, red blue green, battern holder bakelite polycarbonate fancy lamp holder angle type isi certified white secure bulb fit ideal for wall ceiling mount, multimedia usb keyboard comes with 114 keys including 12 dedicated multimedia keys & with rupee key, junction box 1 way, 2 way, 3 way, 4 way white pvc conduit pipe, for false ceiling, gi sheet metal modular box 4way electrical junction box rust resistant heavy-duty galvanized iron housing for home, office, industrial, commercial wiring projects, electrical tape pvc tape self adhesive pvc electrical insulation tape, pvc mix 1mm to 5mm sleeves fiberglass insulation sleeves, silicone coated, wire sleeve, sleeve for good wire protection expandable heat shrink cable sleeve, insulation paper sheet class f 155degree electrical insulation paper flame resistant high dielectric aramid sheet for motor & transformer (90cm x 30cm) -7mils, protected led indicator red,380v ac high-visibility red led for clear operational status indication 22.5mm, ic these are the 10 output pins on which the counting occurs, they are not in order hence verify pin diagram above 555 timer, hydraulic oil aw 68 (hydraulic oil aw 68) (iso vg 68), bore high-speed steel face milling cutter hss precision cutter for metalworking industrial applications tool and die making cnc machining, harpic disinfectant toilet cleaner liquid, original, hacksaw blades 300mm (12inch) 18 tp carbon steel - flexible type-heavy duty cutting blade for metal, wood, pvc, plastic pipes-for home, garage, workshop, industry, smooth adhesive glue for craft, paper, office & school projects strong bond and easy application, grease normal food grade,high temperature heavy duty lubricating grease, plastic adjustable cable gland waterproof cable gland with locknut cable gland screw joints for enclosure wires, gear oil 90 no for all vehicles thermal stability, anti-wear protection, corrosion resistance, gearbox and differentials, for hcvs, sheet metal kit kat fuse unit enclosure 200amp 415v heavy duty iron cutout box rewirable kitkat fuse switch powder coated metal enclosure for industrial, commercial electrical distribution, floor acid cleaner multi-purpose disinfectant liquid anti-bacterial surface cleaner for hospitals, homes and bathrooms, flexible copper electrical wire 23/76 heavy duty multi-strand copper cable for home & domestic wiring, durable insulated electric wire, multicolor spring file board/cobra file folder for documents, files for certificate and documents, fevistik glue stick 25g paper adhesive stick for kids, school, office and craft use smooth application, quick dry and non-toxic fevistick, wire ferrules kit, wire terminal ferrules crimp connector, insulated cord pin end terminal great assortment ferrules kit with portable box, laminated yellow paper envelope a4 size 10 x 12 inch, poly laminated inside, tear-resistant, moisture-proof document cover for office, school, filing, courier use, a3 yellow laminated envelopes 12 x 16 inch size 120 gsm for home office business couriers letters, engine oil stop-start 20/40 engine oil for petrol, diesel and cng cars, coolant ready mix (cars) jis k 2234 class 2, astm d3306, p 80 5 grit mtr.silicon carbide, p 180 grit cloth sand paper, p 2000 silicon emery paper sheet water proof, p 800 grit wet & dry sand paper, 63a 4-pole elcb 30ma residual current circuit breaker for shock and fire protection din rail mount reliable leakage protection for home, commercial and industrial use, pure copper earthing rod 99.99% purity 1 m long copper rod heavy quality, copper bonded earthing electrode 1 meter 40mm diameter bentonite clay filled copper coated grounding rod for home industrial earthing compatible for up to 5 kw of load capacity, non magnetic wooden white board duster black board wooden duster whiteboard eraser for erasing white board marker or chalk board writing, 4 way spn metal single door distribution box powder coated metal body, 8 way spn metal single door distribution box powder coated metal body, diode in4007 passive, two-terminal electrical components that limit or regulate the flow of electric current in a circuit, din mounting rails (size- 8inch x35mm x 7.5mm) industrial equipment mounting, rattle-proof, battery water distilled water for use in battery distilled water pure di-ionised distilled water for multipurpose uses battery/inverter, autoclaving,reagent water,lab and scientific products, cutting oil, grade industrial cnc grade industrial, machine, lathe machine, grinding machine etc, cotton waste for hand cleaning, winding wire copper super enamelled copper winding wire 36 swg, 3 pole contactor heavy duty electrical contactor with 220v ac coil for industrial and commercial applications, male to male jumper wires 40 pin dupont cable breadboard connector for pcb circuit prototypin pi diy electronics projects flexible durable multi color ribbon wires, tee 25mm white pvc conduit pipe, for false ceiling, bend 25mm white pvc conduit pipe, for false ceiling, lithium coin cell battery cmos battery for motherboard, calculator, camera, car remote, toys, medical devices long lasting power, dustless chalks white limestone slate pencils chalk piece full size, celling rose 3-platedurable and stylish electrical outlet for home and office, white,, cd/dvd/ohp marker in classic black, ideal for clear and permanent markings on discs and overheads, cat 6e 305 meter ethernet cable/lan cable/network cable high speed 250mhz i weatherproof/uv resistant i rj45 lan cable i -10degree to 60degree weather solid conductor i 4 pair without connector, cast iron welding electrode 5mm nickel iron cast iron repair electrode smaw welding rod for cast iron, gear housing, pump casing & machine repair, cast iron welding electrode 4mm nickel iron cast iron repair electrode smaw welding rod for cast iron, gear housing, pump casing & machine repair, cast iron welding electrode 2.5mm nickel iron cast iron repair electrode smaw welding rod for cast iron, gear housing, pump casing & machine repair, carbon paper sapphire blue pack of 100 sheets india no.1 carbon paper brand non smudge royal blue impressions compatible with pen and pencil clean duplication for office, billing use and artwork tracing, capacitors 2.5 mfd electrolytic and ceramic passive, pvc cable tray wiring duct 45mm x 25mm size with 1m long cable channel with cover electrical wire management and cable routing duct for electrical wiring grey, connector crimp connectors assortment set, electric cable lugs, flat, round connectors, fork, ring terminals, butt connectors automotive cable terminals, cable clips with metal nails - heavy duty wire fasteners, cord organizers, round cable clamps for wall-mounted cable management, hanging wires, home & office use, step type busbar chamber box 100a, 415v heavy duty metal body, grey finish electrical distribution box for industrial, commercial & residential use, single-phase bridge rectifier with aluminum case, 50a 1000v ac to dc converter for welding machines, solar power systems, inverters & industrial equipment, high performance brake oil high boiling point corrosion protection for passenger, sports and commercial vehicles, breadboard kit with jumper wires 840 point pcb board arduino compatible electronics project kit for students and beginners, cotton thread white cotton thread for winding, distilled water pure di-ionised distilled water for multipurpose uses battery/inverter, autoclaving,reagent water,lab and scientific products, exide fxp0-xp800l xpress front car battery (12v, 80ah), ball point pen tumbler pack black body blue, black and red ink, penta modular 2m 6/16 a polycarbonate twin switch (white, 240 volts), penta modular 2m 6/16 a polycarbonate twin socket (white, 240 volts), 4 module modular gang box heavy duty modular board box, battery 12v 26ah powersafe sealed battery - ups, solar

Agency / Dept :

directorate general of training

Due Date :

Aug 19, 2026

Tender Value :

Refer Document

View Documents

T18 Ref No : 16924713

Location : bangarapet , karnataka

Agency / Dept :

mstc limited metal scrap trade corporation limited

Due Date :

Aug 19, 2026

Tender Value :

Refer Document

View Documents

T18 Ref No : 15925123

Location : kolkata , west bengal

corrigendum tender for float-cum-boost dual battery charger suitable for charging 150/250 ah, 220 v plante lead acid battery, design, manufacture, supply, erection, testing & commissioning of float-cum-boost dual batt ery charger suitable for charging 150/250 ah, 220 v plante lead acid battery, 155 ah nickel cadmium batt ery and 144 ah lithium iron phosphate battery set as per enclosed specification no. rdso/pe/spec/ac/000 8 (rev 2) along with metro railway kolkata's addendum to this rdso specification - warranty period: 60 months after the date of delivery pl code : 479038080017

Agency / Dept :

metro railway

Due Date :

Jun 30, 2026

Tender Value :

Refer Document

View Documents

T18 Ref No : 15957929

Location : bhilwara , rajasthan

Source : GEM Tenders

Agency / Dept :

department of technical education DTE

Due Date :

Jul 13, 2026

Tender Value :

32.07L

View Documents

T18 Ref No : 16448737

Location : sikar , rajasthan

Source : GEM Tenders

corrigendum tender for capacity 20 to 160 mm , cylinder liner dry and wet liner press fit and slide fit , depth micrometer 0 to 25 mm , dial gauge type 1 gr a complete with clamping devices and with magnetic stand , different type of engine bearing model , different types of piston model , dividers with spring 150 mm , drift punch copper 150 mm , drill point angle gauge , drill twist 1.5 mm to 15 mm various sizes by 0.5 mm , electric soldering iron 60 watt 230 v , electric soldering iron 25 watts 230 v , electric testing screw driver , engineers stethoscope , feeler gauge 20 blades metric , file flat bastard 200 mm , file half round second cut 200 mm , file square second cut 200 mm , file square rough 300 mm , file triangular second cut 150 mm , files assorted sizes and types including safe edge file 20 nos , flat file second cut 250 mm , flat file bastard 350mm , fuel injection pump diesel in line , fuel injection pump dismantling tool kit universal vice , fuel injection pumps ve pump distributor fuel rotary pump dpc pumps along with special tools and accessories , glow plug tester , surface plate l 1600 w 1000 mm c i granite with stand and cover , grease gun , growler , hacksaw frame adjustable type 200 to 300 mm , hammer ball pein 750 gm , hammer chipping 250 gm , hammer copper 1 kg with handle , hammer mallet , hand operated crimping tool wire up to 4 mm , hand operated crimping tool wire up to 10 mm , hand shear universal 250 mm , hollow punch set of seven pieces 6 mm to 15 mm , injector cleaning unit technical , injector testing set hand tester , lifting jack screw type 3 ton capacity , lifting jack screw type 5 ton capacity , lifting jack screw type 20 ton capacity , magnifying glass 75 mm , marking out table l 90 w 60 h 90 cm , multi meter digital , oil pump gear type pump for lmv , oil pump rotor type pump for lmv , oil stone l 15 w 5 h 2.5 cm , oscilloscope 20 mhz , micrometer outside 50 to 75 mm , micrometer outside 75 to 100 mm , pipe flaring tool , piston ring compressor , pliers round nose 150 mm , portable electric drill machine , prick punch 150 mm , punch number 4 mm , rivet sets snap and dolly combined 3 mm 4 mm and 6 mm , scraper flat 250 mm , scraper half round 250 mm , scraper triangular 250 mm , scriber with scribing block universal , set of stock and dies metric , tinmans shear l 450 mm w 600 mm , sheet metal gauge , tinman s shear 300 mm , soldering copper hatchet type 500 gm , solid parallels in pairs different sizes in metric , spanner clyburn 150 mm , spanner t flocks for screwing up and up screwing inaccessible , spanner adjustable 150 mm , spark lighter , spark plug spanner l 14 mm w 18 mm size , steel rule 150 mm inch and metric , straight edge gauge 2 ft , straight edge gauge 4 ft , tachometer counting type , tandem master cylinder with booster working model , taps and dies complete sets b a , taps and dies bsw various type in inch , tap and dies set metric size 03 to 24 mm , taps and die set bsf various type in inch , taps and dies width worth fine , timing lighter new brand , torque wrenches 5 to 35 nm , torque wrenches 12 to 68 nm , torque wrenches 50 to 225 nm , tyre pressure gauge with holding nipple , universal puller , v block l 75 w 38 mm pair with clamps , valve lifter , valve spring compressor universal , vernier caliper 0 to 300 mm with least count 0 point 02 mm , water pump new brand , wire gauge metric , vices of 120 mm jaw , air conditioned crdi vehicle new brand lmv bs vi with abs and speed limiter , arbor press, mechanic diesel lab items, allen key set of 12 pieces with hex key sizes 2 to 14 mm made from forged steel alloy carbon steel, caliper inside 150mm spring made of carbon steel gauging point should be heat treated, centre punch 10mm dia x 100 mm round knurled body made of alloy steel gauging point should be heat treated, screw driver 250 x 9 mm flat tip size 8 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, properly heat treated., hammer ball pein, head weight 500 gm made from forged carbon steel, face heat treated. with wooden handle, hand file 200mm second cut, made of heat treated tool steel with wooden handle., philips screw driver 100 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip with neon tester., philips screw driver 150 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 200 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 250 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 300 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, pliers combination 200mm insulated with moulded sleeves of high voltage grade, made from drop forged alloy steel with side cutting facilities, properly heat treated., screw driver heavy duty 200mm x 9 mm flat tip size 9 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., screw driver heavy duty300mmx 9mm flat tip size 10 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., spanner d.e. 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanner ring 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanners socket with speed handle, t-bar, ratchet and universal up to 32 mm set of 28 pieces with box. made from forged carbon steel., steel rule 300 mm. metric, english both graduation made of stainless steel with conversion table engraved, as per drawing l 150 mm w 200 h 400, wire cutter & stripper 150 mm made of high carbon steel , wire stripping capacity up to 6mm, spanner adjustable 350 mm blade, made from alloy steel, workshop grade, 1 should be trigger operated blow gun with interchangeable nozzles with metal gun 2 fitted with brass air inlet ferrule 3 suitable for quick removal of chips, dust and particulate from any surface 4 operating pressure 80 to 150 psi 5 high pressure nozzle 6 safety nozzle adaptor 7 crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application 8 low pressure nozzle and supplied with manual, ammeter dc shunt type up to 300 amp the shunts are constructed from high grade managing, air ratchet with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box with manual, air impact wrench with 180 ft lb 244 nm max torque and 7100 rpm and a feather touch trigger two position forward power regulator and conveniently located forward reverse ring provide precise control with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box and manual will be provided. square drive half inch bolt size in the box 9 to 27 mm, angle plate size 200x100x200mm made from close grain c.i. workshop grade., anvil 50 kg. single horn type made from cast steel working face heat treated, face having hardie hole & punching hole, stand made from fabricated angle iron (50 x 50 x 6 mm) height 400 mm, alternator starter with minimum 2 hp ac motor digital auto electrical test bench checking for alternator and starter motor auto electrical test bench checking for alternator and starter motor mild steel frame work table top test bench 2 hp and 3 phase1440 rpm motor induction motor suitable for 50 hz 415 v ac supply with heavy duty transformer for starter testing with light run test variable frequency drive vfd overload capability 150 percentage of rated current 60 seconds built in pid simplify the establishment of a closed loop control system key lock and function selection communication port rs 485 4 point 3 inch colour hmi for indication for voltage and current 2 ch analogue input controlled via rs 485 bus utilizing modbus rtu protocol 1 channel dc current input with 75 mv input for shunt 1 channel dc voltage input 200vdc 1 construction of relay output 7a 230vac 2 leds for indicating the power status and signal trans receiving status capable to interface with pc attached with thermal printer communication interface rs485 rtu diode150 a 12 to 24 v 4 nos shunt 200a 75 mv transformer 12v 200 a 24 v 150 a 1 no transformer 0 to 240 v primary 12 to 0 to 12 v secondary 1 no mains supply 415 v ac 3 phase 50 hz ac power supply v belt heavy duty banana terminals on the front panel pulley groove for alternator checking heavy duty rugged vice for mounting alternator and starter operation manual should be provided, voltage 12v input volt 230v 50hz output volt 12 v dc capable for 5ah 35ah battery charged rotary swicth to select volt and amp ammeter display and main switch plus minus knob crocodile connector with wire 2 ft in length aligator clips high current charging upto 15 ampere circuit breaker for reverse battery auto cut off after charging, blow lamp capacity 1000ml body made from brass. with inclined burner type, should be used on vehicle belts where the manufacturer specifies the timing belt tension to be set at a specific location on the belt span between pulleys should have clear incremental markings with knurled knob for accurate measurement. should speed up timing belt installation .measurement range 0 to 80 kg 750 newton supplied in a foam inlay box, power supply electrical electrical cable m 5 mtr working pressure bar 8 to 12 kg cm2 hose length m 10 mtr suction and discharge each motor rpm 2800 rpm flow rate l h 8 to 12 lpm phase 1 phase 3 hp 230 volt suitable for cold water spray gun standard number of pistons plungers 3 pressure gauge auto stop facility for power saving suitable guns for water and foam sprey water filter pressure regulating valve for increasing and decreasing output pressure the operating unit should be mounted on a ms structure trolley type starter switch caster wheel 2 nos water pipe inlet and out let, automatic double pawl braking system capacity range 1- 3 ton fully forged hooks are fitted safety latches shield bearing zinc plated hand chain as standard standard lift 3 meter effort required to lift 3 ton load- 30 kg. with tripod stand & standard accessories., chisel flat 100mm, made of forged steel. point heat treated., circlip plier internal 150 mm drop forge alloy steel heat treatment moulded sleeve . ., circlip plier external 150 mm.drop forge alloy steel heat treatment moulded sleeve ., circlip plier internal 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., circlip plier external 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., clamps c 100mm, made of forged steel., clamps c 150mm, made of forged steel., clamps c 200mm, made of forged steel., tray cleaning 450 into 300mm -gi sheet 18 g side handle both border wires, 1 quickconnect adapter push pressure scale 0 1000 psi 0 7000 2 kpareads pressure from 0 to 1000 psi 3 2 to 9 by 16 diameter gauge 4 thumb button air release should be supplied with adapters for suzuki hyundai gm ford isuzu mercedes toyota volkswagen and peugeot compatible for dry test with adptor standard accessories all above items should be placed secured in a blow molded plastic box or metal box, connecting rod alignment fixture height of fixture 450mm connecting rod 40 to 100mm connecting rod alignment fixture checking bent twist offset precision ground surfaceshould be supplied with following accessories bent and twist indicator bending bar with alignerdial indicator and the connecting rod fixture ms iron should be fitted over a base etc with all accessory, soldering iron copper bit weight 250gm hatchet type with handle, cylinder gauge, bore dial gauge with accessories 20-160 mm least count 0.01 mm self cantering with interchangeable mounted head complete., technical specification cylinder liners of following types dry liner for engine cylinder press fit type wet liner for engine cylinder with rubber o ring slide fit liner piston with ringstandard features, micrometer depth 0 to 25mm lc 0 point 01mm carbide tipped on measuring face made from alloy steel complete in box, dial gauge indicator l.c. 0.1 mm ran- ge 10mm dial graduation 0-50-0 balance plunger type dial & holder. magnetic base with on-off switch, fine tolerance setting arm, stem dia. as per dial indicator, complete set in dial gauge., the model will made out of different type of engine bearing suitable for engine 1 shell bearing for crankshaft with main journal and big end journal 2 thrust bearing for crankshaft 3 ball bearing for crank shaft 4 bush bearing for connecting rod 5 needle bearing for connecting rod 6 bush bearing for camshaft & rocker arm 7 shell bearing for overhead cam shaft 8 needle bearing for rocker arm 9 name mention of each bearing on board, the model will be made out of different type of piston model. 01set concave head dome head flat head solid skirt recessed head light weight model for easy shifting. piston will be mounted on a wooden board name mentioned of each type the piston.and constructional diagram details printed on to a colourful panel with details of applications the item will be supplied in a dust proof box & covered by the acrylic sheet., divider spring joint 150mm, made of alloy steel., drift punch copper 150mm made by copper, drill point angle gauge made by drop forged steel., twist drill straight shank high speed steel 1.5 to 15mm by 0.5mm set 10pcs. high carbon steel &heat treated., soldering iron 60 watt, 230 v.a.c. standard length of mains lead with 3 pin top, bit made from copper., soldering iron 25 watt, 230 v,.a.c. standard length of mains lead with 3 pin top, bit made from copper., neon tester 500 volt heavy duty insulated. handle made from transparent cellulose acetate with plated metal clip. blades made from selected steel chrome & insulated., engineer s stethoscope with standard accessories, feeler gauge set of 20 blades metric, different sizes, length of blades 100 mm, made from alloy steel., file flat 200mm bastard made of heat treated tool steel with wooden handle., file half round 20cm second cut, made of heat treated tool steel with wooden handle., file square 200mm second cut, made of heat treated tool steel with wooden handle., file, square 300mm rough, made of heat treated tool steel with wooden handle., file triangular 150mm second cut, made of heat treated tool steel with wooden handle., files assorted sizes and types including safe edge file (20 nos), made high carbon/high speed steel. size (150 mm)., file flat 250mm second cut, made of heat treated tool steel with wooden handle., file flat 350mm bastard, made of heat treated tool steel with wooden handle., fuel injection pump (diesel) inline complete pump assembly suitable for 4/6 cylinders diesel engine rsv mechanical or pneumatic governor type the item will be supplied on suitable plywood and collared with attractive colour. a dust proof wooden box & covered by the acrylic sheet., fuel injection pump dismantling tool kit 1. universal vice 2. pre stroke setting attachment with gauge, 3. pump couplings, 4. control setting gauge with attachment, 5 .tappet adjusting spanner (thin),6. ring wrench,7. tappet lifter, 8. mechanical finger (gripper), 9. adapter capsule box for fip, 10. thread puller for fly weight, 11. drift for bottom plug, 12. impact screw driver, 13. flower/trox allen key set, 14. attachment for setting angle of accelerate lever, 15. coupling for fip cam, coupling wrench, 16. round nut spanner different type, 17. ve pump holding attachment, 18. inline and rotary pump holding attachments,19. drift for installing and removing oil seal, 20. holder spanner, 21. spring locking plates, 22. governor weight remover., fuel injection pump in diesel type distributor fuel rotary pump with dpc complete pump assembly compatible for 4 cylinders diesel pump operated by handle and constructional diagram details printed on to a colourful panel with details of applications will be supplied with along with all tools and special tools and accessories for dismantling and assembling fuel injection pump special tools 1 extra long socket 2 mounting stand for ve pump distributor fuel rotary pump dpc pumps 3 injection pump special socket 4. coapling for ve pump distributor fuel rotary pump dpc pumps 5 testing jig 6two pin spnner 7 huk spanner 8.pump nozzle refting tool, power input 8point 5 to 15 volt max current 80 ampere, surface plate made of closed grain seasoned cast iron/ granite 1600 mmx 1000 mm grade 1, with calibration test certificate, complete with top cover, side handle. m.s. fabricated standard height stand with leveling screws ., grease gun pressure type 500 gm. capacity hand operated, manufactured from tin plate with steel pump with fixed spot., growler general & internal set suitable to test d.c. armature and ac motor starter rating supply ac. 250volt 50hz., hacksaw frame adjustable type 200-300mm with blade & handle., hammer ball pein head weight 750gm made from forged carbon steel, face heat treated. wooden handle fitted, hammer chipping 250gm with handle, one side chisel and other side pointed end type hard and tempered, steel handle about 250 mm long., hammer copper forged head weight 1000gm with fibre glass handle,, hammer mallet head dia.100 mm. made from wood with handle., hand operated crimping tool for crimping up to 4 mm, hand operated crimping tool for crimping up to 10 mm, hand shear universal( straight snip ) 250 mm, made from drop forge steel. cutting edge hard & tempered., punch hollow, hole dia 6 to 15 mm set of 7 pieces made from alloy steel, main unit power supply ac 220v plus minus 10 percent 50hz ultrasonic cleaner power 30 to 50w ultrasonic bath inner body material stainless steel simulated rpm range 10 to 9990 rpm step 10 rpm time range 1 to 9999 pulse width 0 point 5 to 25 ms step 0 point 1ms fuel tank capacity 2 to 4 ltr no of glass tube 4 nos with marking glass tube holder and manifold moc aluminium display type led suitable for all types of petrol injectors and gdi gasoline direct injection injectors achieve automatic cleaning and testing of injectors the machine should be capable to perform flowing test uniformity/spray ability test will be able to test the uniformity of injecting amount of each injector and to monitor the spraying status of each injector with the help of backlight leakage test will be able to test the sealing and dribbling conditions of injectors under system pressure injecting flow test will be able to check the injecting amount of the injector in 15 seconds of constant injection auto test will be able to test injectors by simulating different working conditions ultrasonic cleaning will be able to perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely, for nozzle sizes presser gauge 0 to 400 kgf cm2 standard accessories steel aluminium fuel container with filter manual hand operating lever handle with grip. along with split pin three way shut off valve with valve spindle. suitable fuel pipes for all injector, lifting jack screw type 3 ton capacity for vehicle 3048 kg road open height 13 inch closed 4 inch dia of screw 1 point 25 inch with bearing type lifting jack, lifting jack screw type 5ton capacity for vehicle 5048 kg road open height 13 closed 7 inch dia of screw 1 point 50 inch with bearing type lifting jack, lifting jack screw type 20 ton capacity road open height 14 inch closed 7 dia of screw 1 point 75 inch to 2 point 0 inch square threads with bearing type, magnifying glass 75mm with handle, marking table made from seasoned close grain c.i. 90cm x 60cm x 90cm. workshop grade with test certificate. with steel handle both side, levelling screws & cover. m.s. fabricated stand in standard size, digits 3 and half digit display lcd display with large digits for easy visibility voltage range ac up to 750v ac voltage range dc up to 1000v dc ac and dc current range up to 20a resistance measurement up to 200 mohm with capacitance frequency diode transistor test audible continuity test data hold facilities, 1. gear type pump for lmv this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine, 1. rotor type pump for lmv. this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine., stone oil 15 x 5 x 2.5 cm. one side rough & one side smooth., analog oscilloscope 20 mhz two channel 4 trace monochrome display 1 general portable rugged including features of component tester and in built frequency counter 2 bandwidth dc to 20 mhz 3d b 3 of channels two channels 4 deflection coefficient in calibrated steps from 5 mv to 5 v cm 5 rise time 17 point 5 ns 6 variable hold off for stable triggering 7 input impedance 1 mohm 25 pf 8 time base coefficients 18 calibrated steps 0 point 5microsec per cm to 0 point 2 sec cm with 5 magnifier to 100ns cm 9 trigger system automatic and normal level adjustable 10 source ch i ch ii alt line external 11 slope positive negative 12 coupling ac dc gnd 13 sensitivity 5 mm 14 trigger bandwidth 40 mhz 15 horizontal deflection dc 2 point 3 mhz 3db bandwidth 16 x to y mode phase shift 3 degree up to 60 khz 17 frequency counter range 20 hz to 30 mhz in built 18 computer interface usb 19 resolution 10 hz 10 khz 20 sensitivity 0 to 5v by div 21 attenuation 1 ratio 1 and 1 ratio 20 22 max input voltage 300 v rms cat ii 23 crt 140 mm rectangular with internal graticule and p31 phosphor 0 point 8 mm green colour plexiglass 24 calibrator operator 1 khz square wave 0 point2 vpp for probe compensation 25 z modulation ttl level 26 power supply 230 v plus minus 10 percent 50 hz ac supply component tester built in single touch, micrometer outside 50 to 75 mm l c 0 point 01 mm carbide tipped on anvil and spindle measuring face with spindle lock setting spanner and test piece 50 mm made of alloy steel complete in box with master, micrometer outside 75-100 mm, least count 0.01mm, carbide tipped on anvil &spindle measuring face, with spindle lock, setting spanner & test piece 75 mm, made of alloy steel complete in box with master., flaring tool set single type for tube 4 point 7 to 16 mm o d block and cone made of alloy steel and hard tempered nickel chrome plated able to flaring 1 by 2 inch 7 by 16 inch 1 by 4 inch 3 by 16 inch 3 by 8 inch and 5 by 8 inch o d, piston ring compressor 50 to 150 mm 2 1 by 2 inch wide spring bands equally distributes tension for easy compression for use on all passenger vehicles, pliers combination 200 mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, pliers nose 150mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, drill machine portable electrical 15 mm capacity a c single phase input full load 235 watt rpm 2800 and standard length supply cable and key, prick punch 150mm knurled body made from tool steel tip ground and heat treated, punch number 4 mm made from tool steel hardened set containing set of 9 piece 0 to 9 in suitable container, rivet sets snap and dolly combined 3 mm 4 mm 6 mm hand operated mabe drop forgd steel, scraper flat 250mm made from tool steel tip hardened and ground with wooden handle, scraper half round 20mm made from tool steel tip hardened and ground with wooden handle, scraper triangular 250mm made from tool steel tip hardened and ground with wooden handle, scriber with universal scribes block and accessories, dies set of stock and dies metric dies 3 4 5 6 8 10 12 14 16 and 18 set of 10 made from alloy tool steel dies circular split pattern type with suitable die stock with suitable dies handle dies hardened and tempered complete set in box, heavy duty cast iron body blade length600mm blade material d2 table size 450 mm into 600 mm back gauge attachment table 2t slot paddle spring operated, sheet metal gauge made from alloy steel steel graduation in both system british and metric, tinmans shear 300 mm made from drop forge steel cutting edge hard and tempered, soldering copper hatchet type 500 gms, solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated size 1 by 2 inch accuracy 0 point 0002 inch material made of high quality alloy steel precision ground and hardened product includes one pair of 1 inch into 6 into 1 by 2 into one pair of 1 to 1 by 2 inch into 6 into 1 by 2 inch one pair of 1 to 1 by 4 inch into 6 into 1 by 2 inch one pair of 1 to 3 by 4 inch into 6 into 1 by 2 inch application to be used in setting up work for drilling and milling, spanner clyburn 150mm. made from forged carbon steel. phosphate finish, spanner t flex for screwing up and unscrewing in inaccessible position and size 6 8 10 12 14 set of 5 pcs, spanner or wrench adjustable 150mm. standard pattern selected, made from forged steel heat treated, spark lighter friction type suitable for gas lighting, spark plug spanner size14 into 18 mm made from forged carbon steel, steel rule 150mm metric english both graduation made of stainless steel with conversion table engraved, straight edge 600 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, straight edge 1200 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, tachometer counting type display 5 digit lcd display accuracy plus minus 0 point 05 percent plus 1 digits rpm test range 2 to 99 999 rpm count range 1 to 99 999 counter resolution 0 point 1 rpm 2 to 999 point 9 rpm 1 rpm over 1000 rpm sampling time 0 point 5 sec over 120 rpm detecting distance 50 to 500 mm, this model which will give a complete idea of tandem master cylinder in vehicle and it s function the working model of tandem master cylinder assembly consisting of following minimum parts and practically demonstrable brake disc assembly one caliper assembly brake pad tandem master cylinder with vacuum booster vacuum pump brake hoses oil reservoir with oil with brake pedal features the model will be mounted on m s stand with good quality paint applications suitable sectioned to demonstrate the internal construction diagram details printed on to a colourful panel operating manual will be provided., taps and dies set b.a. 0 to 10 circular split pattern die & hand tap set of 3 piece made from alloy tool steel with suitable die stock and tap handle. taps and dies hardened & tempered. complete set in box, taps and dies b s w 1 by 4 5 by 16 3 by 8 inch 7 by 16 1 2 5 by 8 3 4 inch 7 by 8 1 inch set of 9 made from alloy tool steel dies circular split pattern type with suitable die stock hand tap set of 3 piece and tap handle taps and dies hardened and tempered complete set in box, tap and dies set metric size 03 to 24 mm 3 4 5 6 8 10 12 14 16 20 22 24 mm set of 12 made from alloy tool steel dies hand circular split pattern type with die stocks tap set having three piece taps with suitable tap handle and according to size taps and dies hardened and tempered complete set in box, taps and die set b s f by 4 5 by 16 3 by 8 inch 7 by 16 1 by 2 9 by 16 5 by 8 3 by 4 7 by 8 1 inch set of 10 made of alloy tool steel tap set of 3 piece circular split pattern die set tap wrenches and die stocks taps and dies hardened and tempered complete set in box, taps and dies width worth fine 1 by 8 inch 3 by 16 inch 3 by 8 inch 1 by 4 inch 5 by 16 inch 7 by 16 inch 1 by 2 inch 5 by 8 inch 3 by 4 inch 1 inch set of 10 made from alloy tool steel dies circular split pattern type with die stock hand tap set of 3 pieces with suitable tap handle. tap and dies hardened and tempered complete set in box, timing lighter with neon bulb for setting of all kind of petrol engine timing illumination angle approx 15 degree strobe tube high intensity xenon tube with cable used for checking ignition timing of petrol engine easily operate on 12v ignition systems 12 volt battery operated focused lens should provide light for high visibility of timing mark suitable for petrol carstwo wheelers handle design be more comfortable and easy to operate manufactured by standard company provided with suitable woodenplastic metal box, torque wrench 5 to 35 nm force, adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 12 to 68 nm force adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 50 to 225 nm force, adjustable by turning knurled handle barrel type rod form chrome plated. brake over type, tyre pressure gauge with holding nipple for measuring 0 to 160 lb by sq inch and 0 to 12kgf by sq cm of tyre pressure, universal puller for removing pulleys bearings, v block 75 into 38 mm pair with clamps v block pair with one clamps 75 into 38 into 50 mm by 75 into 50 into 50 mm made from close grain c i workshop grade, valve lifter valve spring for lifting & realizing of spring automatic ratchet lock c type reversible jaw adaptor for multi valve engines capacity 45 to 145mm throated clearance 250mm big window jaw adaptor for easy replacement of valve collects, valve spring compressor universal suitable for various cylinder head engine models, vernier calliper 300 mm length with metric and inch scale l c 0 point 02 mm four way quadric measurement type made from stainless chrome steel micro lapped hardened and tempered in box, automotive water pump of any multi cylinder water cooled engine for dismantling and assembling colored with attractive color. good finish the model will be fitted on suitable plywood sheet and constructional diagram details printed on to a colourful panel with details of applications, wire gauge made from alloy steel, gauge size 0 to 36 swg graduation in metric, bench vices 12cm jaw body made from close grain sg iron and serrated alloy steel jaw jaw heat treated spindle handle dia grater than equal 10 mm and closed on both end unbrakable materials screw materials en 24, engine type 3 cylinder inline common rail turbo diesel iron block air conditioned type displacement 1500 cc rear wheel drive water cooled engine fuel system common rail direct injection body two box five door wagon transmission type 5 speed manual suspension front independent with coil spring rear independent with coil spring steering type power assisted steering power window all four windows reverse gear sensors. anti theft device gprs inbuilt turning diameter 11 point 6 m ground clearance 180 mm wheel base 2680 mm fuel tank 60 litre s standard accessories owner s manual bs vi with abs and speed limiter, an arbor press is a small hand-operated press. it is typically used to perform smaller jobs such as staking riveting installing configuring and removing bearings and other press fit work removable machined steel anvil provides accurate work support in for slot positions automation grade manual material iron weight 30 to 50 kg usage application industrial capacity 2 ton, exhaust gas analyzer petrol arai approved to check construction of co2 o2 and hc and nox 1 construction of carbon monoxide range 0 to 9 point 999 percent resolution 0 point 01 percent 2 co2 carbon dioxide range 0 t

Agency / Dept :

department of technical education DTE

Due Date :

Jul 30, 2026

Tender Value :

Refer Document

View Documents

T18 Ref No : 16358975

Location : new delhi , delhi

Agency / Dept :

container corporation of india limited CONCOR

Due Date :

Jul 31, 2026

Tender Value :

Refer Document

View Documents

T18 Ref No : 16643091

Location : sonapur , assam

Source : GEM Tenders

tender for suction apparatus , ecg machine , shadow less lamp , office table with drawer , revolving chair for mos , office chair with arm , examination table with couch , almirah ss , dressing trolley , bowel ss , tray kidney ss , bucket ss , heamatology analyser , colour specific bins for bio medical waste management , chart holder , case sheet holder , pharmacy freezer , defibrillator , water dispenser , waiting room chair set of three, hospital equipment and furniture establishment, portable suction machine electrically operated for medical use to maintain airway by removing secretions. compact portable unit housed in sturdy abs plastic molded casing provided with carrying handle and storage space for suction hose. solid base to keep unit stationary during operation. equipped with built in bourdon tube type vacuum gauge size 5 cm diameter range 0 to 760 mm hg and vacuum regulator. suction capacity 10 to 20 liters per minute and maximum vacuum 450 mm hg or more. single jar configuration with 1000 ml capacity reusable autoclavable polycarbonate jar having graduated markings. provided with mechanical overflow protection system trap filter non collapsible transparent silicon suction tubing inner diameter 8 mm length minimum 1 meter and power cable. noise level at maximum vacuum 55 db or less and equipment weight 6 kg or less. power supply requirements 230 v 50 hz ac. electrical safety compliant to iec 60601 1 2 or bis equivalent and product standard conformity to is 18375 part 1 latest. manufacturing unit certified to iso 13485 latest standard and compliant to medical device rules mdr 2017 with valid cdsco license. minimum warranty shall be 1 year., 3 channel electrocardiography ecg machine for non invasive examination of heart electrical activity. operating modes include automatic manual and rhythm with ecg lead annotation facility. system can acquire simultaneously and interpret 12 leads for adult and pediatric patients. equipped with lead fail and lead reversal indication. acquisition time 10 seconds. real time colour backlit 5 inch lcd display screen with resolution 640 by 480 pixels showing ecg waveforms with signal quality indication. equipped with artifact ac and low and high pass frequency filters. internal memory to store 151 to 200 ecgs. features full screen preview of ecg report prior to print and hard keys alphanumeric keyboard for patient data entry. latest interpretation software included for amplitudes duration and morphologies analysis. built in thermal printer with paper size 80 mm by 20 meter recorder speed 25 mm per second and digital array resolution 200 dpi by 500 dpi. built in rechargeable battery with capacity for 30 ecgs or 30 minutes continuous rhythm recording on single charge. individual patient lead replaceable without changing complete cable assembly. operating temperature 10 to 40 degree celsius and relative humidity 15 to 90 percent. power supply requirements 220 to 240 v ac 50 hz with indian plug. supplied with 12 lead ecg machine patient cables set of adult chest electrodes power cable clip electrodes and compatible trolley. compliant to safety standards is 13450 part 2 sec 25 or iec 60601 2 25. manufacturing unit certified to iso 13485 latest standard and compliant to medical device rules mdr 2017 with valid cdsco license. minimum warranty shall be 1 year., examination light for medical use with mobile stand mounting option and wheel locking provision. features led light source with correlated colour temperature range 4501 to 6500 k colour rendering index cri 80 to 100 and minimum led life 50000 hours. working distance 100 to 400 mm minimum light intensity 50000 lux and spot size 60 to 150 mm. equipped with continuous dimming levels touchless on off control and goose neck extension provision. power supply requirement 220 v 50 hz with power consumption 7 to 150 w and power chord length minimum 1 meter. electrical safety compliant to iec 60601 or bis equivalent and manufacturing unit certified to iso 13485 latest standard. product shall comply with medical device rules mdr 2017. comprehensive warranty shall be minimum 3 years., table for medical officer in rectangle shape with engineered wood table top material and iron table base material with drawer storage facility. dimensions are width 60 inches depth 30 inches and height 30 inches., high back revolving chair of adjustable height with wheels provided with centre tilt mechanism and pneumatic gas lift mechanism for height adjustment. seat features cushion with polyester fabric upholstery in black colour. minimum seat height is 400 mm with minimum height adjustment range of 100 mm. backrest is high back and high width in black colour with lumbar support headrest and tilting lock facility. headrest is tilt adjustable with padding. armrest is adjustable type with padding. product comes with minimum 1 year warranty., the required item is a general purpose chair q2 category featuring a sturdy cantilever understructure with a curved frame underneath the seat. it comes with a mid back height ranging between 400 mm to 700 mm and a medium backrest width between 550 mm to 700 mm. the backrest material is fully covered across its entire height designed in a black colour family and includes built in lumbar support for ergonomic comfort. the chair seat is equipped with a comfortable cushion upholstered in high quality leather material maintaining a minimum seat height of 400 mm and finished in a black colour family. additionally the chair is equipped with fixed armrests featuring integrated cushioning for enhanced arm support. the item must carry a minimum of 1 year standard warranty., treatment couch examination couch dressing table for patient examinations and medical procedures. manual type 2 section configuration with maximum load weight capacity upto 320 kgs. height elevation hydraulic manual from 400 mm to 1200 mm. total length 1200 mm to 2200 mm table top width 450 mm to 1000 mm head section length 400 mm to 1000 mm and leg section length 700 mm to 1200 mm. head tilt angle range 10 to 75 degree with manual foot section adjustment. frame made of mild steel material with removable drainage system and mattress fitting type tighten with belt. manufacturing unit certified to iso 13485 latest standard and compliant to medical device rules mdr 2017. comprehensive warranty shall be minimum 2 years., free standing almirah made of iron base material. features two plain doors of base material with front door lock and front door handle facility. dimensions are height 84 inches width 72 inches and depth 18 inches. item shall be assembled by seller at consignee premises site at no extra cost., dressing trolley used for dressing purpose at bedside in hospital wards or dressing rooms. framework made of electric resistance butt welded erw steel tube with tube thickness 1 point 2 mm and tube diameter 25 point 40 mm for vertical and 19 point 05 mm for horizontal. equipped with stainless steel shelves conforming to is 4033 latest. pivot bar rings and disc made of mild steel cold rolled. railing provided on three sides made of chromium plated over nickel conforming to grade b of is 1068 latest. trolley manufacturing conforms to is 4769 latest and finishing as per is 4033 latest. dimensions 660 mm length by 430 mm width by 830 mm height. provided with provision for receiving waste pail brackets for accommodating wash bowl of 200 mm top diameter and brackets for instrument tray of 200 by 150 by 50 mm. mounted on 4 castor wheels with anti static rubber tread each having 50 mm diameter. packing and marking as per is 4033 latest. manufacturing unit certified to iso 13485 latest standard and compliant to medical device rules mdr 2017. warranty shall be 2 years., stainless steel punch bowl round shape with mirrored finish. capacity 4000 milliliter top diameter 10 point 17 centimeter and height 5 inch. made of stainless steel material and dishwasher safe., kidney tray used in surgical procedures for carrying dressing bandages small instruments soiled dressing and other medical waste. reusable and autoclavable made of stainless steel material. dimensions 300 mm length by 130 mm width by 60 mm height. shape dimensions tolerance workmanship and finish strictly conforming to is 3992 latest revision. packing and marking as per is 3992 latest revision and mdr. manufacturing unit certified to iso 13485 latest standard and compliant to medical device rules mdr 2017 with valid cdsco license or registration. minimum warranty shall be 2 years., stainless steel bucket with nominal capacity of 18 litres size 325 mm made of stainless steel material. general workmanship and finish shall be of high standard with no sharp edges mirror finish and free from distortion dents wrinkles and surface defects. bucket shall not rock when placed on flat surface. warranty shall be minimum 1 year., 5 part automated hematology analyser closed benchtop fully automatic system with 5 year warranty. based on principle of counting and sizing for 5 part wbc differential without retic and nrbc enumeration capability. discrete analysis modes available cbc and cbc diff. analysis method for wbc is tri angle laser flow cytometry rbc and platelet measurement by electrical impedance and hemoglobin measurement by cyanide free colorimetry. equipment features automatic start up shut down sample analysis clot detection probe wipe auto dilution and double bathing mechanism. maximum sample aspiration volume 50 micro litres or less and throughput capacity 50 to 60 samples per hour. provided with pc based data management led display 500 gb hdd 4 gb ram 17 inch monitor and external black and white laser printer. includes online ups rating 0 point 5 kva with 30 minute backup time. supplied with consumables required for carrying out haematological testing of 500 samples. compliant to medical device rules 2017 iso 13485 and iec en 60601 1 electrical safety standards., 30l pp waste bin in solid green. features a foot pedal lid and built in handle for sanitary waste management. designed without wheels or drain plug for stable, stationary use, exam pad for patient chart holder made of plastic material with metal punchless clip mechanism ideal for a4 size sheets. features transparent glossy surface finish with rubberized corners. dimensions shall be length 35 cm width 22 cm thickness 3 mm and net weight 120 grams., notepad holder shall be used as case sheet holder for patient made of synthetic leather material in dark brown colour suitable for a5 standard size. dimensions shall be length 25 centimeter width 9 centimeter and weight 100 gram. item shall have iso certification and warranty shall be minimum 1 year., ultra low temperature laboratory vertical deep freezer 320 litre capacity for storage of biological samples with 1 year warranty. constructed with galvanised steel body tough powder coated exterior finish stainless steel inside chamber and 100 mm ground clearance. features heavy duty lockable castors levelling adjustments double door with locking lids vip with green puf panels 5 inner storage compartments with insulated doors and adjustable height. uses cfc free hcfc free non flammable refrigerants with 2 compressors pull down time 5 point 2 hours operating temperature minus 10 degree c to minus 40 degree c and capability to attain minus 80 degree c at ambient temperature of 32 degree c. equipped with fully programmable microprocessor control system membrane keypad digital temperature display battery backup for display heated air vent washable condenser filter and decompression valve. includes audible and visible alarms for temperature rise power failure system failure and low battery with noise level 58 db. supplied with 1 pair of cryogloves and 1 ice scraper. compliant to ce standards iso certification and iec 61010 electrical safety standards., defibrillator featuring biphasic technology with automated external defibrillation and manual modes for adult and pediatric patients with 5 year warranty. equipped with tft or lcd display screen of 6 inches or more displaying 2 waveforms ecg trace selected energy and delivered energy. maximum energy selection up to 360 joules or more with synchronized cardioversion and external non invasive pacing in demand and fixed modes. provides 5 lead ecg monitoring with user selectable alarm settings. operates on mains as well as inbuilt rechargeable li ion battery capable of delivering 100 or more shocks at maximum energy with charging time 7 seconds or less. features automatic and manual self test mechanisms with code ready indicator and capability for transport on ground ambulance. standard accessories include 1 li ion battery 1 ecg cable 1 multi function defibrillator monitoring pads gel sheet and 10 recorder paper rolls. compliant to medical device rules 2017 iso 13485 and iec 60601 electrical safety standards., reverse osmosis based point of use water treatment system for drinking purposes as per is 16240 isi marked freestanding type. filtration capacity 20 lph and above with actual filtration capacity 20 lph. additional water purification stages include ultraviolet disinfection sediment filter carbon filter normal water dispensing cold water dispensing and hot water dispensing. guaranteed output water quality as per is 10500 or better for feed water tds upto 2000 ppm. storage tank made of abs pp food grade material with capacity 20 liters. power supply 230 v single phase with auto cut off controller. scope includes standard installation commissioning and comprehensive warranty minimum 1 year., waiting area public place 3 seater chair with seat only configuration having armrest and backrest. material of chair mainframe ss 304 with thickness 2 point 5 to 3 point 0 mm and cold rolled steel base legs with powder coated 70 microns finish. chair seat and backrest made of mild steel material with thickness 1 point 0 to 1 point 5 mm in silver grey color. armrest provided at extreme ends made of mild steel material. overall length minimum 1100 mm overall height minimum 750 mm minimum floor to seat height 400 mm seat depth minimum 450 mm and seat width minimum 485 mm. warranty shall be minimum 12 months.

Agency / Dept :

indo tibetan border police ITBP

Due Date :

Aug 25, 2026

Tender Value :

Refer Document

View Documents

About Government Tenders for Nickel Iron Batteries

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Nickel Iron Batteries. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Nickel Iron Batteries sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Nickel Iron Batteries Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Nickel Iron Batteries, you can build a highly profitable and stable pipeline of government clients.

Nickel Iron Batteries Tender Information Service

Stop wasting time filtering through irrelevant notices. Our Nickel Iron Batteries Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Nickel Iron Batteries Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Nickel Iron Batteries.
Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Tender Bidding Service in Nickel Iron Batteries

Winning a contract for Nickel Iron Batteries depends entirely on how perfectly your technical capabilities match the buyerâs demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18âs Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Nickel Iron Batteries Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Nickel Iron Batteries bids.
Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Nickel Iron Batteries GeM Consultant & Registration Service

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Nickel Iron Batteries. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Nickel Iron Batteries, ensuring maximum search visibility.
OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Nickel Iron Batteries, maximizing your chances of securing L1 status.

Frequently Asked Questions (FAQs) for Nickel Iron Batteries Tenders

How do I find government contracts exclusively matching my work in Nickel Iron Batteries?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Nickel Iron Batteries tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

As an MSME, can I get financial benefits when bidding for Nickel Iron Batteries?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Nickel Iron Batteries, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Nickel Iron Batteries is declared L1 and is generally awarded the contract

Search Tenders

Filters

10Latest Nickel iron batteries Tenders List

Latest Nickel iron batteries Tenders in India – Verified Leads & Real-Time Insights by Tender18

Real-Time Nickel iron batteries Tender Intelligence & Monitoring

Comprehensive Sources of Nickel iron batteries Tenders

Step-by-Step Guide to Participate in Nickel iron batteries Tenders

1. Eligibility & Prequalification

2. Mandatory Documentation Checklist

3. BOQ Analysis & Financial Bidding

Why Tender18 is a Trusted Platform for Nickel iron batteries Tenders

✔ Proven Expertise in Government Procurement

✔ Verified & Reliable Data

✔ Advanced Filtering Tools

✔ Corrigendum & Update Tracking

✔ Historical Data Insights

✔ End-to-End Bidding Support

Growth of Nickel iron batteries Sector in 2026

Frequently Asked Questions (SEO Optimized)

How can I get daily Nickel iron batteries tender alerts?

Is EMD mandatory for all Nickel iron batteries tenders?

What is the difference between a Nickel iron batteries work tender and supply tender?

Can I access private Nickel iron batteries tenders on Tender18?

Get Expert Support for Nickel iron batteries Tenders

Unlock Full Tender Access

Unlock Full Tender Access

Unlock Full Tender Access

About Government Tenders for Nickel Iron Batteries

Work Dynamics in the Nickel Iron Batteries Sector

Nickel Iron Batteries Tender Information Service

Deep Technical Insights & Documentation For Nickel Iron Batteries Tenders

Tender Bidding Service in Nickel Iron Batteries

Flawless Compliance & Portal Execution For Nickel Iron Batteries Tenders

Nickel Iron Batteries GeM Consultant & Registration Service

Expert Profile Management & Catalogue

Strategic Live Bid Participation

Frequently Asked Questions (FAQs) for Nickel Iron Batteries Tenders

How do I find government contracts exclusively matching my work in Nickel Iron Batteries?

Do I need specific testing or quality certificates to apply for these contracts?

What is a BOQ and why is it important for my bid?

Are samples required to be submitted physically before the digital bid opens?

How does the Dedicated Tender Expert from Tender18 help me?

What is the role of a Digital Signature Certificate (DSC)?

As an MSME, can I get financial benefits when bidding for Nickel Iron Batteries?

Why should I list my services or products on GeM for this category?

What makes Tender18 a reliable GeM support partner?

What does "L1" mean in these government contracts?

GeM Registration & Consultant Services By State

GeM Registration & Consultant Services By City

Tender Bidding Service & Consultancy By Authorities

Explore Government Tenders and GeM Portal Blogs