sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

57Latest Metal strap Tenders List

Latest Metal strap Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Metal strap tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Metal strap tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Metal strap Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Metal strap tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Metal strap Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Metal strap Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Metal strap Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Metal strap tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Metal strap Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Metal strap sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Metal strap tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Metal strap tenders.

Is EMD mandatory for all Metal strap tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Metal strap work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Metal strap tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Metal strap Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16924645
Location : kanpur , uttar pradesh
LIVE TENDER
auction or scrap of lot no - 113051 lot name - carbon spring steel strip 32mm x1. product type - metal category - iron and steel carbon spring steel strip 32mm x1. qty: 900 kg folio no.: 144060436 hsn code: 72072020 | lot no - 113075 lot name - envelope made of aluinium foil lami product type - metal category - aluminium envelope made of aluinium foil lami qty: 3091 no. folio no.: 1469910001 hsn code: 76072090 | lot no - 113077 lot name - envelope made of aluminium foil product type - metal category - aluminium envelope made of aluminium foil qty: 21373 no. folio no.: 1469910003 hsn code: 76072090 | lot no - 113101 lot name - euderm cc- 5074 product type - miscellaneous category - leather euderm cc- 5074 qty: 416.65 kg folio no.: 1010802139 hsn code: 38099390 | lot no - 113102 lot name - black es (basf) collosol- colours bl product type - miscellaneous category - leather black es (basf) collosol- colours bl qty: 120.5 kg folio no.: 2102101430 hsn code: 38099390 | lot no - 113112 lot name - fabric water proof rubberised white product type - miscellaneous category - rubber fabric water proof rubberised white qty: 2319.5 meter folio no.: 2103216030 hsn code: 59069990 | lot no - 88033 lot name - alu alloy strip 4 mm x 35 mm x 1.5 mm product type - metal category - aluminium alu alloy strip 4 mm x 35 mm x 1.5 mm qty: 61000 no. folio no.: 615160015 hsn code: 76069290 | lot no - 88022 lot name - bolt m.s. slotted chease head m-5 x 16mm long with hexnut conf product type - metal category - iron and steel bolt m.s. slotted chease head m-5 x 16mm long with hexnut conf qty: 38000 no. folio no.: 9910260625 hsn code: 73181500 | lot no - 88021 lot name - washer copper 4.00mm i/d x 15.00mm o/d x1.5mm thick to suit pi product type - metal category - copper washer copper 4.00mm i/d x 15.00mm o/d x1.5mm thick to suit pi qty: 1372 no. folio no.: 1752020103 hsn code: 74152100 | lot no - 88026 lot name - split pin half round 1.5mm x 10mm long product type - metal category - iron and steel split pin half round 1.5mm x 10mm long qty: 200 no. folio no.: 9910262367 hsn code: 73182400 | lot no - 6557 lot name - foot lifter liffing lever pt. no. 1780 for seiko-sk-2b product type - miscellaneous category - paper and related products foot lifter liffing lever pt. no. 1780 for seiko-sk- 2b qty: 50 no. folio no.: 2530141637 hsn code: 84529099 | lot no - 226227 lot name - buckle adjusting aluminium 60 mm black anodized product type - metal category - aluminium buckle adjusting aluminium 60 mm black anodized qty: 41632 no. folio no.: 2111080003 hsn code: 83089019 | lot no - 226019 lot name - plastic stopper for bags water carrying canvas 13.5 ltr. product type - miscellaneous category - plastic plastic stopper for bags water carrying canvas 13.5 ltr. qty: 5790 no. folio no.: 2101080001 hsn code: 39235010 | lot no - 6504 lot name - buff. vegetable tanned crust leather (harness quality) product type - miscellaneous category - leather buff. vegetable tanned crust leather (harness quality) qty: 2698.5 kg folio no.: 2102469032 hsn code: 41044100 | lot no - 6507 lot name - spur boot ordinary/withou t straps and tabs complete. product type - miscellaneous category - leather spur boot ordinary/with out straps and tabs complete. qty: 147 pair folio no.: 2102704111 hsn code: 6403 | lot no - 226037 lot name - month & year identification slip size-30 mm x 15 mm product type - miscellaneous category - paper and related products month & year identification slip size-30 mm x 15 mm qty: 222584 no. folio no.: 2102052231 hsn code: 48211010 | lot no - 6548 lot name - cement portland ordinary product type - chemicals category - others cement portland ordinary qty: 14705.13 kgs. folio no.: 1912004000 hsn code: 25232920
Agency / Dept :
mstc limited metal scrap trade corporation limited
Due Date :
Aug 31, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16898431
Location : bishnupur , manipur
Source : GEM Tenders
LIVE TENDER
tender for consumable equipment punching pads , boxing gloves , bandages , games dress red , games dress blue , football , nivea football , speed parachute , plyometric jumping box , basu half ball , dome cones , electronic football tactical board , weighing mechine , football uniform , football boots , socks , keeper gloves , black belt , hand glove , foot protector , double fan pad , skipping rope , resistance band , metal plyo box plyo table , plastic moveable hurdle , space marker , weightlifting belt , athletic tape , magnesium carbonate , lifting straps, consumable equipment, high quality boxing punching pads suitable for training and practice with durable impact absorbing padding, boxing gloves 10 oz and 12 oz suitable for training and competition practice with secure wrist support, boxing hand bandages made from durable elastic material for hand and wrist protection during training, boxing games dress in red colour available in s m l xl and xxl sizes suitable for training and competition, boxing games dress in blue colour available in s m l xl and xxl sizes suitable for training and competition, vector football with 32 panel thermo bonded construction suitable for professional training and match practice, nivea football nitro with thermo bonded construction suitable for professional football training and match practice, football speed parachute suitable for resistance training sprint training and improvement of acceleration, plyometric jumping box made from durable material suitable for explosive strength agility and jump training, basu half ball suitable for balance stability coordination and functional football training, dome cones made from durable flexible material suitable for agility drills marking and training exercises, electronic football tactical board suitable for planning match strategies formations and tactical training, digital weighing machine with capacity up to 100 kg suitable for accurate body weight measurement, football uniform set consisting of jersey shorts and socks suitable for training and competition, anza velocity football boots with durable construction suitable for football training and match play, football socks made from durable breathable fabric providing comfort support and suitable fit during training and matches, goalkeeper gloves with padded palm and secure wrist fastening suitable for training and competition, taekwondo black belt made from durable cotton material with reinforced stitching suitable for regular training and competition, taekwondo hand gloves with impact absorbing padding suitable for hand protection during training and sparring, taekwondo foot protectors with impact absorbing padding suitable for foot and ankle protection during training and sparring, double fan pad made from durable impact absorbing material suitable for kicking drills and striking practice, skipping rope with durable rope and comfortable handles suitable for cardiovascular conditioning and footwork training, resistance band made from durable elastic material suitable for strength conditioning flexibility and resistance training, metal plyo box or plyo table with sturdy construction suitable for plyometric jumping strength and conditioning exercises, plastic moveable hurdles made from durable lightweight material suitable for agility speed coordination and footwork drills, space markers made from durable flexible material suitable for training area marking footwork drills and agility exercises, eleiko leather weightlifting belt made from durable leather material providing firm support to the lower back and abdomen during lifting, athletic tape made from durable adhesive fabric suitable for hand grip support and protection during weightlifting training, magnesium carbonate basic light suitable for improving grip and reducing moisture on hands during weightlifting, lifting straps made from durable strong material suitable for secure grip support during heavy weightlifting exercises
Agency / Dept :
sports authority of india SAI
Due Date :
Sep 09, 2026 (9 days left)
Tender Value :
7.38L
View Documents
T18 Ref No : 16818670
Location : nagpur , maharashtra
LIVE TENDER
tender for umbrella survey,, umbrella survey, specification: a. diameter of umbrella: 2160 mm b. length of circular handle/post: 2550 mm c. diameter of circular handle/post: 45 mm d. no of cane rib : 10 nos e. length of cane rib: 1100 mm f. diameter of circular cane rib: 25mm g. colour of circular handle and cane ribs: black h. colour of top layer fabric: white (webfab trap & canvas cotton duck canvas cotton duck canv as cloth 500 gsm) i. colour of inner/bottom layer fabric: blue (webfab trap & canvas cotton duck canv as cotton duck canvas cloth 500 gsm) j. metal locking arrangement with chain to keep umbrella in op ening as well as in closed position k. provision of fabric strap with button arrangement to keep the um brella wrapped. - warranty period: 30 months after the date of delivery -quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs
Agency / Dept :
south east central railway SECR
Due Date :
Sep 12, 2026 (12 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16722521
Location : imphal , manipur
Source : GEM Tenders
LIVE TENDER
tender for cap nocks , arrow rest , plunger button , clicker , finger tab , string , serving thread , arrow rest blade , bcy loop materials , arm guard , quiver back , arrow puller , archery target buttress , target stand , releaser pouch , target face , thera band , yoga mat , balance board, archery consumables 2026, 4.5-1x, recurve bow arrow rest, adjustable and micro-adjustable type, suitable for olympic and target recurve bows, durable metal construction., recurve bow plunger button, adjustable spring-tension type, suitable for olympic and target recurve bows, recurve bow clicker, adjustable length position type, suitable for olympic target recurve bows,, with guard, small, with guard, medium, with guard, large, 652x spectra bcy, bcy 3d 0.18, beiter 4/0.25, beiter 4/0.20, spool, 0.21, 452 x bcy, recurve archery arm guard and forearm protector, designed to protect the bow arm from string contact, made of durable, lightweight and impact-resistant material, back-mounted archery quiver suitable for recurve and target archery, made of durable lightweight material, designed to securely hold and protect arrows during training and practice, adequate capacity for standard target arrows, comfortable adjustable shoulder/waist strap system, easy and quick arrow access, secure arrow retention, suitable for regular training use, complete with all necessary straps and fittings., archery arrow puller made of durable, high-grip rubber and elastic material, designed for safe and easy removal of arrows from target faces and dense target materials, ergonomic grip for firm handling, suitable for carbon, aluminium and standard target arrows, lightweight and compact, suitable for regular training and competition use., special black foam, with wheel, back side, archery release aid carrying storage pouch, made of durable and lightweight material, suitable for securely storing and protecting finger and release aids and small archery accessories, compact design with secure closure, easy to carry and access, suitable for regular training and competition use., water proof and approved by world archery, high quality elastic resistance band suitable for strength, flexibility, rehabilitation and sports specific conditioning exercise, high density, non-slip exercise mat suitable for yoga, stretching, mobility, core strengthening and conditioning exercises, durable and cushioning material for user comfort, sports training balance board designed for improving balance, stability, coordination, proprioception and core strength
Agency / Dept :
sports authority of india SAI
Due Date :
Sep 02, 2026 (2 days left)
Tender Value :
11.36L
View Documents
T18 Ref No : 16726499
Location : satara , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for comb curry , pmr bit , leather straps , rikabs steel , tent pegging lance , riding breeches , cotton girth , bala tang horse riding bit , head stall , hair cutting machine , hand gloves , gaiters for ankle shoes , caremonial lance , running martiangle , horse riding shoe , riding helmet , riding chestguard big , bridle complete , nee cap , saddle complete set , ridding stick , horse lead rope , stable nukta , horse chest collar , horse grooming kit, horse riding equipments, horse grooming curry comb material rubber or plastic or stainless steel teeth handle ergonomic hand grip teeth flexible rounded teeth use horse grooming and cleaning, horse riding bit pmr type material stainless steel nickel plated steel finish rust resistant mouthpiece smooth rounded bar size approx 5 5.5 inch mouthpiece use horse riding training and control compatibility standard horse bridle, leather straps for horse riding equipment material genuine leather width approx 20 30 mm length approx 60 150 cm thickness 3 5 mm fittings stainless steel buckle rivets finish smooth polished leather use saddle stirrup and bridle attachment for horse riding, horse riding stirrup material stainless steel finish rust resistant polished finish tread anti slip rubber pad size approx 4 5 to 5 inch width load capacity suitable for standard horse riding use compatibility standard english or military saddle use foot support for rider during horse riding, equestrian tent pegging spear shaft material bamboo fiberglass seasoned wood tip material stainless steel spear head length approx 2.4 to 2.75 meter diameter approx 30 to 35 mm weight lightweight and well balanced for mounted use grip non slip grip area near handle finish smooth polished shaft with rust resistant metal tip use cavalry training and horse riding competitions, equestrian riding breeches color white and green material cotton polyester lycra stretch fabric fabric feature breathable stretchable and sweat absorbing knee patch or full seat silicone grip waist belt loops with button closure slim fit riding design lower leg elastic lycra sock finish for boots, equestrian saddle girth material heavy duty cotton webbing soft cotton padding for horse comfort length approx 40 to 50 inch stainless steel roller buckles on both ends sweat absorbing and breathable securing saddle during horse riding, horse riding bit bala tang pattern material stainless steel nickel plated steel rust resistant polished finish smooth rounded bar approx 5 to 5 5 inch mouthpiece standard cheek rings horse riding training, horse bridle headstall material genuine leather adjustable head and cheek straps fittings stainless steel or brass buckles smooth polished leather use for horse riding training, electric horse clipper heavy duty suitable for horse body hair trimming and grooming motor power minimum 200w to 500w high speed 2000 to 3000 rpm approx heavy duty cutting blades 220 to 240v ac lightweight and easy to handle warranty minimum 1 year, supply of industrial safety hand gloves heavy duty suitable for general industrial material handling work with good grip abrasion resistance and hand protection complete as required, made of synthetic leather material zipper closure with elastic panel adjustable strap water resistant suitable for horse riding supplied in standard sizes, bamboo or wooden fiberglass shaft with metal tip length 8 to 9 feet light weight well balanced suitable for tent pegging and ceremonial use, made of leather or nylon with adjustable straps stainless steel rings suitable for horse riding training and control available in standard sizes, long horse riding boots made of synthetic material with anti slip sole and heel elastic side panels suitable for horse riding training size 5 6 7 8 9 and 10, small size helmet isi certified helmet with abs shell eps lining adjustable strap ventilated design suitable for horse riding safety, high density foam padding with durable outer fabric protection area chest and back and side ribs front zipper with velcro straps ce level 1 and level 2 safety standard size small and big, supply of complete bridle assembly suitable for lifting rigging applications comprising bridle legs master link shackles and all necessary fittings of approved make and suitable swl capacity complete as required, small and big size knee protector pads anti impact knee protector for adults tpe hard shell waterproof work knee protector pads cushioning protective knee pad for skating work gardening, material high quality leather tree lightweight seat size 15 to 18 inch color black and brown stirrup material stainless steel alloy stirrup leathers adjustable heavy-duty girth leather adjustable saddle pad padded cotton 10 to 25 mm) bridle leather with bit & reins, shaft material flexible polymer handle anti leather grip length 60 cm to 75 cm standard tip soft leather flap or popper color black and brown weight lightweight and balanced flexibility moderate not too stiff finish smooth, lead with chain size 2 meter material polypropylene color white, horse lead rope sturdy halter rope for leading training horse 2.5m red and blue lead ropes horse wear equestrian outdoor sports, horse chest collar breastplate red and navy blue nylon with fleece padding adjustable neck strap equestrian riding gear, horse grooming kit 13 piece horse brushes for grooming supplies set with organizer bag horse brush & curry comb for effective cleaning
Agency / Dept :
indian army
Due Date :
Sep 02, 2026 (2 days left)
Tender Value :
10L
View Documents
T18 Ref No : 16952699
Location : ernakulam , kerala
Source : GEM Tenders
LIVE TENDER
tender for ec6045d 334a 8 , ec6045d 334a 7 , ec6045d 334a 24 , ec6045d 334a 21 , ec6045d 334a 17 , ec6045d 334a 3 , ec6045d 334b 1 , ec6045d 334a 9 , ec6045d 334a 14 , ec6045d 334a 10 , ec6045d 304 18 , ec6045d 3 3p5379ba , ec6045d 243 120 , ec6045d 225 57 , ec6045d 214 8 , ec6045d 214 15 , ec6045d 214 13 , ec6045d part 106 plate 187pc8590 , ec6045d 214 11 , ec6045d part 115 plate 304pc1754 , ec6045d 175 11 , ec6045d 175 43 , ec6045d 175 41 , ec6045d part 12 plate 54pc708 , ec6045d 175 35 , ec6045d 175 12 , ec6045d 171 47 , ec6045d 171 30 , ec6045d 163 6 , ec6045d 163 5 , ec6045d part 2 plate 38pc974 , ec6045d 14 3p3087nf , ec6045d 139b 38 , ec6045d plate 55 , ec6045d pc4939 336 12 , ec6045d 13 29 , ec6045d part 6 plate 243pc13587 , ec6045d 13 27 , ec6045d part 59 plate 225pc12076 , ec6045d part 56 plate 222pc2657 , ec6045d part 5 plate 134pc10408 , ec6045d part 4 plate 93 , ec6045d part 38 plate 175pc9793 , ec6045d part 32 plate 222pc17363 , ec6045d part 31 plate 134pc7906 , ec6045d part 30 plate 139bpc678 , ec6045d part 30 plate 134pc7905 , ec6045d part 3 plate 93pc4869 , ec6045d part 29 plate 139bpc651 , ec6045d part 7 plate 171pc221 , ec6045d part 80 plate 222pc4685 , ec6045d part 9 plate 334bpc21962 , ec6045d part 23 plate 54pc4641 , ec6045d pc22227 336 7 , ec6045d pc4722 222 55 , ec6045d part 23 plate 222pc6566 , ec6045d part 158 plate 222pc1059 , ec6045d part 154 plate 171pc4736 , ec6045d part 12 plate 93pc1636 , ec6045d part 101 plate 55assy 13 , ec6045d ilms c 544 , ec6045d 70 507 , ec6045d 54 30 , ec6045d 45b 25 , ec6045d 45b 26 , ec6045d 93 2 , ec6045d 40 111 , ec6045d 3p5378ba , ec6045d 3p53013bb , ec6045d 3p3012nf , ec6045d 334b 8 , ec6045d 175 42 , ec6045d 334b 7 , ec6045d 334b 4 , ec6045d 334b 24 , ec6045d 334b 21 , ec6045d 187 14 , ec6045d 334b 17 , ec6045d part 114 plate 222pc1770 , ec6045d 334b 6, 26kcrc001, tie bolt, screwed locking washer, connection screw, set screw, spring pin, female taper sleeve, shaft, roller bearing, sleeve female taper, circlip cor brg, star washer, impeller bronze, pin locating, joint ring for plug, backing piece pc no 4992, rubber joint ring pc no 4990, strap pc no 4991, sealing ring, strap screw, washer for connection, joint ring, copper joint air start valve 2815r313996, joint for cylinder head casing, joint for injector connection, joint for rectangle cover, belle ville washer, locking plate for cover set screw, sealing ring for piston pin cover, regulation valve 2815r313936, tab washer bronze, clip for exhaust pipe, slide valve assembly for air trimming valve 2815r314505, joint washer, large end bearing top half, joint, large end bearing bottom half, joint for starter valve piston 2815r314323, set screw 2815r314305, exhaust valve seat 2815r313891, drain cock for cooler, connection pieces 2815r314205, spring clip 2815r314304, bush adm valve guide top, bush, locking washer, sets screw 2815r314164, nut for stud, circlip for clamp screw, oil seal, washer, safety valve seat and guide assy 2815r314009, banjo connection, tab washer, locking wire, bolts for water inlet branch, set screw for cooler, piston, impeller gun metal bs1400 grade, gasket bronze, impeller nut ss bs 970 321 520, male taper sleeve, tab washer for set screw, filter for conn peice 2815r314311, pin grooved
Agency / Dept :
indian navy
Due Date :
Sep 24, 2026 (24 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16919802
Location : hassan , karnataka
Source : GEM Tenders
LIVE TENDER
tender for river sand , surkhi , lime , brick bats of 20 mm , jaggery , antuwalakai , kadukkai , grinding machine hiring including fuel charges , grinding machine , lime mixing machine , size stone , special size bricks , rubbles stone , modular common brunt clay bricks , cement mortar , trowel sharp edge - blades , trowel curve edge , wooden float , plastic buckets 25 liters , aluminium screed 2inchx1inchx5feet , aluminium screed 2inchx1inchx3feet , curing pipe one inch 100 meter , saw blade , rubber hand gloves set , cloth hand gloves set , gumboots , safety helmet , safety goggles , shovel , pvc round pan , sieving mesh , plastic water storage pot , water storage plastic drums , pvc water drum 2000 liters capacity , 2 hp motor , tarpaulin sheet , disposable face mask , safety belt , hammer 2kgs head with handle , chisel , sharping charges of chisel , gunny bags , aluminium wire 90m coil , switch box 4 module, switch and socket , bulb led 18w , pointing trowel , wire brush , coir brush , transportation of materials , 50mm dia and 5mm thick hollow ms pipe , 2 nos ms steel 15mm thick inter lock chainage , synthetic enamel paint , carriage of rubbish item, supply of good quality river sand (coarse and fine) required for lime works shall consist of natural sand, shall be hard, durable, clean and free from adherent coatings and organic matter, shall not contain the amount of clay not more than 5percentage by mass, free from silt, shall not contain any harmful impurities such as iron pyrites, alkalis, salts, coal or other organic impurities to affect adversely the hardening, strength or durability of the mortar, supply of good quality 1st class surkhi used as fine aggregate in lime mortar. surkhi, powdered broken brick, prepared by pozzolanic material well burnt good quality bricks and clay balls, finely grinded, powdered, free from under burnt particles of soluble salts, more resistant to alkalis and salt solutions, pyrites and adherent coatings of soil or silt, used for making waterproofing, lime mortars and, lime concrete, including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications .( test reports as per is standard from recognised govt agency and the material sample approval should be taken from the office before supplying), supply of good quality un slaked lime directly from quarry not more than 15 days required for preparation of lime putty in traditional method on the process of slaking, from non-hydraulic lime silica and alumina in quantities of less than 15percentage in lime will be accepted, used for masonry mortars, lime concrete and plaster undercoat, minimum 1.25n mm square compressive strength for 7days, etc., including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications, supply of good quality 20 mm brick bats obtained by crushing well-burnt clay bricks of class designation 7.5, hard, sound, and free from under-burnt particles, soluble salts, pyrites, dust, soil, and other deleterious matter, graded to pass through a 20 mm sieve and retained on a 10 mm sieve, suitable for use as coarse aggregate in lime mortar and lime concrete, including loading, transportation, unloading, stacking, all labour, and incidental charges complete as directed by the engineer-in-charge and as per specifications, supply of good quality jaggery, ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the work in charge, supply of good quality antuwalakai (soap nut and feronia additive as locally approved), clean, dry and free from impurities, suitable for preparation of traditional lime mortar to improve workability, durability and bonding properties in conservation works, as directed by the engineer-in-charge, supply of good quality kadukkai - mature, clean and free from foreign matter, suitable for use as a traditional additive in lime mortar for improving strength, durability and water resistance in conservation works, as approved by the engineer-in-charge, grinding machine hiring including fuel charges providing and hiring heavy-duty grinding machine in good working condition, complete with all accessories, suitable for grinding lime, surkhi and other approved materials required for conservation works, including fuel and operational requirements, providing and hiring portable grinding machine in good working condition, complete with necessary accessories, suitable for grinding small quantities of lime mortar ingredients and other approved materials for conservation works, including fuel and operational requirements., lime mixing machine hiring including fuel charges providing and hiring lime mixing machine of adequate capacity, diesel or electrically operated, in good working condition, suitable for uniform mixing of lime mortar for conservation works, complete with all necessary accessories including fuel wherever applicable, size stone 300mm x 300mm x 250mm, bond stone 350mm x 500mm x 250mm size supply of hard, sound and durable natural size stones and bond stones, obtained from approved quarries, free from cracks, weathered portions, laminations and other defects, accurately dressed to the specified dimensions with true beds and joints. the stones shall conform to the provisions of is 1597.size stones shall be used for wall face masonry and structural hearting, while the bond stones shall be provided as tie stones for effective transverse bonding, interlocking and strengthening of masonry in conservation works and the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, special size bricks 220mmx120mmx40mm- should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952 the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, rubbles stone for backfilling 15cm x 22.5cm- supply of hard, sound and durable natural rubble stones of minimum size 150 mm x 225 mm, obtained from approved quarries, free from cracks, weathered portions and other defects, hammer dressed in accordance with is 1129 and conforming to is 1597 (part 1). the stones shall have a minimum thickness of 225 mm, be laid with the broadest face on the prepared bed to achieve proper interlocking, with joints tightly packed using stone spalls. the finished pitching shall be suitable for dry or grouted stone pitching in conservation works and slope protection, the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, modular common brunt clay bricks of class designation 7.5 - should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952, cement mortar 1 into 4 where 1 part cement to 4 parts sand-ratio in which specify clean dry sand mention water as needed for workability also note its uses for example bricklaying blockwork and tile bedding and including material quality where opc cement type and standards like is codes in india ensuring consistency with measured proportions for strength., trowel sharp edge blades hardened and tempered highcarbon steei for durabitity staintess steei for rust resistance. handles smooth and seasoned hardwood or pvc. should be in accordance with lndian standards ls 1630 1984., trowel curve edge - blades hardened, tempered high-carbon steel for durability stainless steel for rust resistance. handles smooth, seasoned hardwood or pvc. should be in accordance with indian standards is 1630 (1984)., supply of wooden float of size 300 mm x 150 mm, manufactured from seasoned hardwood such as teak, pine, sheesham or equivalent, having a 10 to 15 mm thick smooth, flat base with slightly bevelled edges and fitted with an ergonomically designed top mounted wooden or high impact composite handle securely fixed with screws or resin bonding. the float shall be lightweight, durable and moisture-resistant, suitable for levelling, compacting and finishing lime mortar, plaster and concrete surfaces in conservation works, complete as approved by the engineer in charge, plastic buckets 25 liters - high-durability specifications to withstand rough handling, heavy loads, and exposure to construction materials like lime, mortar, and sand. made from high-density polyethylene (hdpe) or polypropylene (pp), offering impact resistance, chemical resistance, and uv protection for outdoor use. (the material sample approval should be taken from the office before supplying), aluminium screed 2inchx1inchx5feet supply of aluminium screed of size 2 inch x 1 inch x 5 feet, manufactured from high-strength extruded aluminium section, straight, lightweight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime concrete and plaster surfaces in conservation works, complete as directed by the engineer-in-charge, aluminium screed 2inchx1inchx3feet supply of aluminium screed of size 2 inch x 1 inch x 3 feet, manufactured from high-strength extruded aluminium section, lightweight, straight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime mortar and plaster surfaces in conservation works, complete as approved by the engineer-in-charge., curing pipe one inch 100 meter -supply of flexible pvc hose pipe of 25 mm (1 inch) diameter and 100 metres length, manufactured from premium quality pvc, weather-resistant, leak-proof and capable of withstanding normal working pressure, suitable for curing masonry, plaster and concrete works, complete with standard fittings wherever required, supply of industrial quality circular saw blade of 10inch diameter with 30 mm bore, manufactured from high-grade hardened and tempered alloy steel with 40 precision-ground teeth, heavy duty steel plate and optimized kerf width, provided with thermal expansion slots and friction-reducing coating for smooth, stable and reliable cutting with extended service life. the blade shall be easy to installation , suitable for cutting wood, plastics and non-ferrous metals, and compatible with professional cutting machines, complete as approved by the engineer in charge., rubber hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., cloth hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., gumboots should meet requirements such as water impermeability puncture resistance and slip resistant soles safety or protective footwear en iso 20345. it has a minimum impact resistance of 200 joules and compressive strength of at least 15 kn at the toe cap. the material sample approval should be taken from the office before supplying., safety helmet strong, rigid materials like high density polyethylene hdpe, abs, or polypropylene pp, dome shaped, without metallic parts, uv resistant. harness system suspension, impact absorption, penetration resistance, electrical insulation class g general, temperature resistance, standards and certifications is 2925the material sample approval should be taken from the office before supplying., safety goggles- should be impact-resistant polycarbonate lenses, uv protection, anti-fog scratch coatings, and a wraparound side-shield design for full coverage, fitting snugly and comfortably with ventilation, often meeting standards like ansi z87.1, ensuring protection from debris, dust, and radiation for construction environments. (the material sample approval should be taken from the office before supplying), supply of industrial quality multi purpose folding shovel manufactured from high strength metal, rugged, lightweight and corrosion-resistant, suitable for digging, chopping, scooping, hammering and scraping applications. the shovel shall be foldable for easy storage and portability, with an overall shovel length of approximately 23.25 inches 59 cm, saw length with handle of approximately 12.5 inches, integrated saw blade length of approximately 5.5 inches 14 cm, maximum weight of 525 g, and conforming to uiaa safety certification or equivalent, complete as approved by the engineer in charge, pvc round pan ghamela in which high grade virgin polyvinyl chloride or heavy duty polypropylene for high strength and flexibility. smooth interior surface crack and impact resistant, weather resistant for both indoor and outdoor use in which generally 5mm to 10mm thickness and shape is round open to top bowl and standard construction sizes usually 15 to 8 inches diameter and 10 kg to 20 kg load capacity. roughly 8 to 12 inches height. the material sample approval should be taken from the office before supplying., sieving mesh with wooden side frame with stand mechanism of size 2 feet x 5feet fabricated with ss304 ss316 stainless steel wire mesh of approved aperture and gauge securely fixed to a rigid hardwood frame teak neem or treated pine resistant to moisture decay and heavy usage. the unit shall be mounted on a sturdy wooden stand mechanism for convenient operation ensuring stability during sieving of sand surkhi lime and other construction materials used in conservation works. the mesh shall be corrosion resistant durable and free from defects complete as approved by the engineer in charge., plastic water storage pot supply of portable water storage pot manufactured from food-grade virgin high density polyethylene hdpe, polypropylene pp or pet plastic, free from bpa and harmful chemicals, suitable for safe storage of drinking and construction water. the pot shall be durable, leak-proof, uv resistant and provided with a tight fitting screw lid and leak proof plastic tap or dispensing arrangement, with integrated top handle or side grips for easy handling and transportation, complete as approved by the engineer in charge, water storage plastic drums 200l to 200 liters capacity, made of hdpe plastic, corrosion resistance, uv stability, and lightweight 8to10 kg empty removable lid with a metal or plastic locking ring clamp for easy filling, cleaning, and access. the material sample approval should be taken from the office before supplying, pvc water drum 2000 liters capacity of 2000 liter pvc water drum or tank typically feature like durable uv stabilized plastic cylindrical shapes varying thickness for strength and offering strong corrosion resistant storage for drinking industrial or agricultural water needs with options for multiple layers and specific fittings., supply of 2 hp single phase electric motor operating on 220to 240 v ac, 50 and 60 hz power supply, delivering 1.5 kw output with a rated speed of 1440 rpm 4pole or 2800 rpm 2pole and full-load current of 9.2 to 12 a. the motor shall be manufactured with 100 percentage copper windings, enclosed in a totally enclosed fan cooled tefc casing with ip55 protection against dust and water ingress, suitable for continuous operation in construction and conservation works, complete as approved by the engineer in charge., tarpaulin sheet 30 feet x 40 feet high-density polyethylene (hdpe) or multi-layered cross laminated (mlcl) materials, often with 120 gsm to 250 gsm (grams per square meter) thickness for durability, 100% waterproof and weatherproof and uv stabilized/protected (essential for long-term outdoor exposure)., disposable face mask supply of disposable 3ply non woven face mask comprising an outer hydrophobic spun bond non woven layer, a middle high density melt blown polypropylene filtration layer with bacterial filtration efficiency (bfe) of 95 to 99percentage, and an inner soft hydrophilic non woven layer for enhanced comfort. the mask shall be provided with high elastic soft ear loops and an integrated flexible plastic or aluminium nose clip to ensure a secure fit and minimize leakage, suitable for protection against dust and airborne particles during conservation and construction works, complete as approved by the engineer in charge., safety belt-- full-body harnesses (fbh) for fall arrest (dorsal d-ring), made from high-tenacity polyester and nylon webbing (min 44mm wide, 3mm thick) that withstands high tensile loads, featuring corrosion-resistant hardware, ergonomic padding, adjustable straps, and certifications like ce bis iso, ensuring comfort, proper fit, and critical fall-arrest force absorption for working at heights as per is 3521. (the material sample approval should be taken from the office before supplying), hammer 2kgs head with handle - head is hardened and tempered, typically ranging from hrc 48 to 58 for optimum toughness and to prevent shattering. square, double-faced, or hexagonal head with flat striking surfaces, handel made up of high-quality hardwood. two-colour carbon fiberglass shaft designed to absorb shock and reduce hand fatigue., chisel made up of high grade alloy steel, chrome vanadium crv steel or carbon steel for high durability. induction hardened tips around hrc 63 to 65. bevel edged, flat or pointed edge. the material sample approval should be taken from the office before supplying., sharping charges of chisel 5nos x 2times providing sharpening charges for 5 numbers of chisels, each sharpened twice, using mechanical grinding equipment to restore the cutting edge and maintain the required sharpness, profile and temper suitable for stone dressing, brick cutting and conservation works, complete as directed by the engineer-in-charge., gunny bags supply of good quality bt will woven jute gunny bags conforming to is 12650 into 2018 (standard btwill) or is 16186 2014 (lightweight sacking), having nominal dimensions of 94 cm x57 cm or 112 cm x 67.5 cm, fabricated from natural jute fibre with 3ply heracles stitched safety seams, durable and free from defects, suitable for storage and transportation of construction materials and for use in curing works during conservation works, complete as approved by the engineer in charge, aluminium wire 90m coil supply of pvc insulated aluminium wire in 90 metre coil of approved size 7 bar 20, manufactured with high-quality aluminium conductor and durable pvc insulation, providing safe, reliable and efficient current flow with good heat resistance. the wire shall be lightweight, flexible and easy to installation , suitable for domestic, commercial and light electrical wiring applications, complete as approved by the engineer-in-charge, switch box 4 module, switch and socket supply of 4 module modular switch box manufactured from fr grade polycarbonate for surface mounting or galvanized iron gi sheet for flush mounting, measuring approximately 135 mm x 75 mm to 150 mm x 90 mm, suitable for accommodating up to 4 modular units comprising switches and sockets. the switches shall have a current rating of 6a bar 10a or 16a 20a 25a as required, with a voltage rating of 240to 250v ac, 50 hz, and the socket shall be 6a or 16a shuttered type with child safety mechanism. the switch box shall be durable, corrosion resistant and suitable for indoor electrical installations, complete as approved by the engineer in charge., bulb led 18w supply of 18 w led bulb suitable for operation on 220 to 240 v ac, 50 hz power supply, having a minimum luminous flux of 1620 to 1908 lumens with an efficacy of 90 to 106 lumens and w. the bulb shall have a power factor of not less than 0.90, colour rendering index cri of 80 ra, surge protection of 2.5 to 4 kv, and an average service life of up to 25,000 hours, suitable for energy efficient indoor illumination, complete as approved by the engineer in charge., pointing trowel supply of professional quality pointing trowel with 150 mm 6 inch long and 75to80 mm wide blade, manufactured from high carbon steel or hardened mild steel with rust-resistant coating and blade thickness of approximately 1.0to1.2 mm. the trowel shall be fitted with a pvc or thermoplastic rubber tpr soft-grip handle of approximately 120to125 mm length, securely attached with a welded or riveted tang, lightweight and durable, suitable for accurate pointing, joint finishing and application of lime mortar in conservation works, complete as approved by the engineer in charge., wire brush supply of heavy-duty wire brush having an overall length of approximately 250 to 300 mm, provided with 3 or 4 rows of hardened carbon steel or iron wire bristles, securely stapled or embedded in a durable hardwood or moulded pvc handle. the brush shall be sturdy, corrosion resistant and suitable for manual cleaning of stone and brick masonry surfaces, removal of loose mortar, dirt, biological growth, rust stains and other surface deposits during conservation works, complete as approved by the engineer in charge., coir brush supply of 10 inch coir fibre handle brush fitted with 100 percentage naturally processed unbleached brown coir fibre bristles of 63 to 76 mm length, densely packed for effective scrubbing, securely fixed to a seasoned hardwood or country wood ergonomic handle. the brush shall be resistant to water, diluted acids and lime wash, biodegradable and free from plastic components, suitable for cleaning stone and brick masonry surfaces, removal of loose dust, lime deposits and surface contaminants during conservation and restoration works, complete as approved by the engineer in charge., transportation of materials providing transportation of approved construction materials from the source of supply to the work site by suitable vehicles, including safe loading, unloading, handling and stacking, ensuring the materials are protected from damage, contamination and moisture during transit, complete as directed by the engineer-in-charge., 50mm dia and 5mm thick hollow ms pipe supply of 50 mm diameter and 5 mm thick mild steel (ms) hollow pipe conforming to is 1161 or is 4923, manufactured from low carbon steel by the electric resistance welded (erw) process or seamless construction, having a minimum yield strength of 240 mpa and tensile strength of 410 mpa. the pipe shall be supplied in standard lengths, true to size, straight, free from dents, cracks and surface defects, with black or hot-dip galvanized finish as specified, suitable for fabrication of grills, railings, fencing, supports and other structural components in conservation works, complete as approved by the engineer-in-charge, 2 nos ms steel 15mm thick inter lock chainage supply of 2 numbers of mild steel ms interlocking chainage plates, manufactured from 15 mm thick ms plates conforming to is 2062 grade e250 a andb, precision cut by laser or cnc process and provided with accurately machined interlocking arrangement for secure and slip free coupling. the plates shall have a minimum yield strength of 250 mpa and tensile strength of 410 to 540 mpa, with high visibility engraved or punched chainage markings as per approved drawings, suitable for alignment, chainage marking and structural applications in conservation works, complete as approved by the engineer in charge, supply of synthetic enamel paint based on modified alkyd resin, having a high gloss finish minimum 85 percentage at 60 degree angle, with 40to 45percentage volume solids and suitable viscosity for brush, roller or spray application. the paint shall provide a dry film thickness of 20 to 35 microns per coat with a theoretical coverage of 10 to 15 m square per litre per coat, and shall be compatible with approved enamel thinners. it shall possess good adhesion, flexibility, resistance to moisture, water, oils, mild industrial fumes and intermittent salt spray and suitable in conservation works, complete as approved by the engineer in charge, carriage of rubbish item providing carriage of rubbish, debris, dismantled materials and other unserviceable waste generated during conservation works from the work site to an approved disposal location by suitable means of transport, including safe loading, unloading and disposal in accordance with local regulations, ensuring the monument premises are kept clean and free from obstructions, complete as directed by the engineer-in-charge.
Agency / Dept :
archaeological survey of india ASI
Due Date :
Sep 11, 2026 (11 days left)
Tender Value :
34.41L
View Documents
T18 Ref No : 16909782
Location : jabalpur , madhya pradesh
LIVE TENDER
auction or scrap of lot no - lot name - unserviceable/ rejected tungsten scrap lf14004211 product type - miscellaneous category - building materials unserviceable/ rejected tun | lot no - lot name - electric fans s/s u/s lf 1528199900 product type - electrical items category - others - electric fans electric fans s/s u/s lf 1528199900 various type of unservicable electric fans/exhaust fan/wall fans/table fans/pedestal fans with/without stand in assorted size (with/without blade,fitment pipe,electric wire) condition- (1) as is where is basis | lot no - lot name - empty drums 40/45 galls (u/s) lf-1441022045 product type - container category - barrel/drum sub category - ms barrel/drum empty drums 40/45 galls (u/s) lf-1441022045 unservicable rusty empty steel drums of size 40/45 gallons with/without lid (include old & new stock) condition- (1) as is where is basis | lot no - lot name - plastic scrap sap lf- 14000128 product type - miscellaneous category - plastic plastic scrap sap lf- 14000128 unservicable plastic container (84mm heat plastic cover) any type/size of plastic (single/twin) carriers/container s, (with /without of any type of steel washer/steel rivet,any type of washer & rivet material rubber, expanding polystyrene foam,water tank any shape/size with/without any type of plumbing fitment,plastic ring verious type/size,rejected plastic cap rejected plastic component,reject ed plastic drums,verious type jerry can,rejected plastic chair/table. condition- (1) as is where is basis | lot no - lot name - assorted paper scrap sap lf- 14004222 product type - miscellaneous category - paper and related products sub category - paper assorted paper scrap sap lf- 14004222 includes opened carton boxes/corrugated/ paper box, loose papers /unbundled carton paper in dry,wet and oily condition. carton boxes with/without pp straping band along with metal clip. condition | lot no - lot name - steel scrap class c lf- 0491300000 product type - metal category - iron and steel steel scrap class c lf-0491300000 various type/size rusty/ damaged/ rejected steel boxes with/without aluminium or rubber fitment ,various type/size of gi container with/without ferrous,non- ferrous fitmnet. rejected rusty carrier, m.s structures of any size/shape with/without non- ferrous fitment, m.s/ g.i rejected sheet any shape/size, rusty, damaged drums of any size/shape with/without oil/paint residue,etc condition- (1) manual dismental/cutting/ damaged parmission allwoed.
Agency / Dept :
mstc limited metal scrap trade corporation limited
Due Date :
Sep 11, 2026 (11 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 15811366
Location : ernakulam , kerala
auction or scrap of lot no - 1 lot name - used qr tickets product type - miscellaneous category - paper and related products sub category - paper used qr tickets (as is where is) | lot no - 2 lot name - carton box product type - miscellaneous category - paper and related products sub category - cartoons carton box (as is where is) | lot no - 3 lot name - metal turning chips product type - metal category - iron and steel metalturning chips (as is where is) | lot no - 4 lot name - aluminium cable product type - metal category - aluminium aluminium cable (as is where is) | lot no - 5 lot name - ms miscellenous items product type - metal category - iron and steel ms miscellenous items (metal drum(oil drum), cable drum, steel gate, metal straps, metal scrap, metalframe and misc. items) (as is where is) | lot no - 6 lot name - revolving chair product type - miscellaneous category - furniture revolving chair (as is where is) | lot no - 7 lot name - copper cable- 95 sqmm 33 kv product type - metal category - copper pcb group - insulated copper wire scrap copper cable - 95 sqmm 33 kv (as is where is) | lot no - 8 lot name - copper cable - 240 sqmm 33 kv product type - metal category - copper pcb group - insulated copper wire scrap copper cable - 240 sqmm 33 kv (as is where is) | lot no - 9 lot name - plastic can product type - container category - can/tin plastic can (as is where is) | lot no - 10 lot name - w-beam crash barriers product type - metal category - iron and steel w-beam crash barriers (as is where is) | lot no - 11 lot name - gi channel product type - metal category - iron and steel gi channel (as is where is) | lot no - 12 lot name - lead acid battery product type - electrical items category - battery pcb group - used batteries/lead acid batteries/lead acid cells & lead scrap lead acid battery (as is where is) | lot no - 13 lot name - tube-light and fittings product type - electrical items category - others - tube-light & fittings pcb group - e- waste-rule 2022 tube-light & fittings (as is where is) | lot no - 14 lot name - e-waste product type - electrical items category - others - e- waste pcb group - e- waste-rule 2022 e-waste (as is where is) | lot no - 15 lot name - defective electric platform truck product type - miscellaneous category - miscellaneous items defective electric platform truck (as is where is)
Agency / Dept :
kochi metro rail limited KMRL
Due Date :
Jul 02, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16858659
Location : silvassa , dadra and nagar haveli
auction or scrap of lot no - 01 lot name - scrap, steel strap product type - metal category - iron and steel scrap, steel strap material code: 220005802
Agency / Dept :
Vedanta Limited
Due Date :
Aug 21, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Metal Strap. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Metal Strap sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Metal Strap Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Metal Strap, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Metal Strap Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Metal Strap Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Metal Strap.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Metal Strap depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Metal Strap Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Metal Strap bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Metal Strap. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Metal Strap, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Metal Strap, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Metal Strap?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Metal Strap tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Metal Strap?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Metal Strap, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Metal Strap is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All