sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

170Latest Iron shutter Tenders List

Latest Iron shutter Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Iron shutter tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Iron shutter tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Iron shutter Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Iron shutter tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Iron shutter Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Iron shutter Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Iron shutter Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Iron shutter tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Iron shutter Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Iron shutter sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Iron shutter tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Iron shutter tenders.

Is EMD mandatory for all Iron shutter tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Iron shutter work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Iron shutter tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Iron shutter Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16850754
Location : south tripura , tripura
NEW TENDER
tender for (i) construction of new kitchen at belonia sdh,(ii) construction of 2 nos iron shutter of new mch building of belonia sdh, iii) construction of new ambulance/official car parking garage with shutter for belonia sdh, earthwork, brickwork, cc work, wood work with tubular truss, rolling shutter, painting plaster and other allied works.
Agency / Dept :
public works department PWD
Due Date :
Aug 25, 2026 (6 days left)
Tender Value :
36.68L
View Documents
T18 Ref No : 16830431
Location : udhampur , jammu & kashmir
Source : GEM Tenders
NEW TENDER
corrigendum tender for supplying and fixing rolling shutters of approved make, made of required size m. s. laths, interlocke , providing and fixing ball bearing for rolling shutters. , extra for providing mechanical device chain and crank operation for operating rolling shutters. exce , providing 60 mm wall panelling. the wall panels shall be made up of 0.45 mm thick ppgi ribbed sheet , providing 60 mm ceiling panelling. the ceiling panels shall be made up of 0.45 mm thick ppgi ribbed , providing 0.45 mm thick ppgi c fascia /closures , providing dash fastner 10 mm thick and 150mm long , providing angle iron 50x50x6 mm (220mtr) , providing tee iron t 100x50x5mm (300 mtr) , providing ms flat 50x3mm (180 mtr) , providing welding rod 10 no , iron cutting blade 14" , iron cutting blade 4" , pvc gitti 35 mm , self drilling screw 25 mm , 6mm thick iron flat head dry wall screw 40mm long
Agency / Dept :
indo tibetan border police ITBP
Due Date :
Aug 20, 2026 (1 day left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16842257
Location : mumbai , maharashtra
NEW TENDER
auction or scrap of lot no - 01 lot name - scrap reinforcement steel ms product type - metal category - iron and steel scrap; reinforcemen t steel; ms; from :- works / products; small cut pieces; off cut scrap bid | lot no - 02 lot name - ms scrap fabrication shutters product type - metal category - iron and steel ms scrap fabrication shutters bid | lot no - 03 lot name - scrap structural steel column shutter product type - metal category - iron and steel scrap; structural steel column shutter bid | lot no - 04 lot name - scrap prestressing strand ms end bits cut pieces product type - metal category - iron and steel scrap; prestressing strand; ms, end bits / cut pieces bid | lot no - 05 lot name - scrap reinforcement steel moc ms fromworks product type - metal category - iron and steel scrap;reinfo rcement steel;moc:- ms;from:- works / products;sou rce generation:- small cut pieces bid
Agency / Dept :
larsen and toubro limited
Due Date :
Aug 25, 2026 (6 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16835395
Location : ghatshila , jharkhand
Source : GEM Tenders
NEW TENDER
tender for demolishing r.c.c work , demolishing cement concrete , earth work , filling available excavated earth , filling in plinth with sand , plain cement concrete 1 isto 3 isto 6 , laying position cement concrete 1 isto 2 isto 4 , reinforced cement concrete work 1 isto 1.5 isto 3 , steel reinforcement , providing and fixing centering and shuttering , lintels or beams or plinth beams or chujja or griders or bressumers and cantilevers , structural steel work , brick work foundation and plinth , brick work in super structure , half brick masonry , 12 mm thick cement plaster 1 isto 6 , 15 mm thick cement plaster , 12 mm thick cement plaster 1 isto 4 , providing and fixing concertina coil , premium acrlic smooth exterior paint , chain link , supplying and laying painting with synthetic enamel paint , steel work in built up tubular , transportation of building rubbish , transportation of excavated earth , surface dressing , cleaning jungle , providing and applying priming coat with ready mixed wood, construction of boundary wall from sitadanga to jaduguda thana in ucil housing colony jaduguda, demolishing r.c.c work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 2 km lead as per direction of engineer in charge ., demolishing cement concrete mix 1 / 3 /6 as richer mix manually or by mechanical means including disposal of material within 1 km lead as per directions of engineer in charge ., earth work in excavation in foundation, trenches or drains not exceeding 1.50m in width or 10.00 sqm on plain including dressing of sites and ramming of bottoms, lift upto 1.50m including getting out the excavated soil and disposal of surplus excavated soil, including dewatering and directed with a lead of 500 m ., filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.50 m., supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete of direction of the engineer in charge., providing and laying plain cement concrete1/3/6 - 1 cement /3 coarse sand / 6 graded stone aggregate 40mm nominal size in foundation plinth wherever necessary including desalinating finishing curing etc as per specification all complete but excluding the cost of centering and shuttering etc, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1 isto 2 isto 4 (1 cement / 2 coarse sand / 4 graded stone aggregate 20mm nominal size), providing and laying reinforced cement concrete work 1 isto 1.5 isto 3 - 1 cement /1.5 coarse sand / 3 graded stone aggregate 20mm down screened and washed including machine mixing placing in position and mechanically vibrating in columns pillars etc to any level and anywhere and like including preparing of the top surface finishing curing etc complete in all respects as per specification and direction of the engineer-in-charge, steel reinforcement for reinforced cement concrete work including transporting decoiling straightening derusting placing cutting to requiste length hooking bending to correct shape placing in proper position and binding with 16 gauge black annealed wire at every intersection including removal of loos rust and applying a coat of cement wash if necessary complete in all respects as per drawing and as directed, providing and fixing centering and shuttering including strutting, propping etc. and removal of form for foundation, footings, bases of column etc. for mass concrete., providing and fixing centering and shuttering including strutting propping etc and removal of form for - lintels beams plinth beams chujja girders bressumers and cantilevers, providing and laying structural steel work riveted bolted or welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete., providing and laying 1st class brick work with bricks of class designation 75 in foundation and plinth in cement mortar 1/6 -1 cement / 6 coarse sand including all complete as per specification drawing and direction of the eic., providing and laying best quality brick work in super structure upto floor two level 1/6- 1 cement / 6 coarse sand including curing scaffolding shuttering etc all complete. all materials including cement etc to be supplied by the contractor, half brick masonry with common burnt clay f.p.s non modular bricks of class designation 7.5 in foundations and plinth in cement mortar 1/4 - 1 cement / 4 coarse sand, providing and laying 12 mm thick cement plaster 1/6 -1 cement /6 fine sand all complete as per specifications. all materials including cement etc to be supplied by the contractor, providing 15 mm thick cement plaster to a rough side in cement mortar 1/6 - 1 cement / 6 fine sand including scaffolding ,raking the joints backing the surface finishing to correct lines, levels plumb curing as required ., providing and laying 12 mm thick cement plaster 1/4 - 1 cement / 4 fine sand with a floating coat of neat cement punning with redoxided powder all complete as per specification. all materials including cement etc. to be supplied by the contractor., providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron - y shaped placed 2.4 m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer in charge, with reinforced barbed tape (r.b.t.) / spring core (2.5mm thick) wire of high tensile strength of 165 kg per sq. mm with tape (0.52 mm thick) and weight 43.478 gm per metre (cost of m.s. angle, c.c. blocks shall be paid separately) ., finishing walls with premium acrlic smooth exterior paint - whether coat with silicone additives of required shade - new work - two or more coats applied at the rate 1.43ltr per 10 sqm over and including priming coat of exterior primer applied at the rate 2.20 kg per 10 sqm as approved by engineer in charge, providing and fixing g.i chain link fabric fencing of required width in mesh size 50 x 50 mm including straightening with 2 mm dia wire or nuts. bolts and washers as required complete as per the direction of engineer in charge. made of g i wire of dia 4mm ., supplying and laying painting with synthetic enamel paint / over two coats primer of approved brand and manufacturer two or more coats ., steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two coat of synthetic enamel paint including welding and bolted with special shaped washers, locking arrangement etc. all complete. hot finished welded type tubes for single and double leaf entrance gates. size of gate - 3.50 m x 1.80 m -3 nos. size of gate - 1.20 m x 1.80 m -8 nos., transportation of building rubbish from working site to other area upto 2 km by mechanical transport including loading unloading and lift upto 2.20 m disposal of same to be leveled and neatly dressed as per instruction of engineer in charge ., transportation of excavated earth from working site to other area load upto 1 km by mechanical transport including loading unloading and lift upto 2 20 m disposal earth to be levelled and neatly dressed as per instruction of engineer in charge, surface dressing of the ground including removing vegetation and inequalities, clay etc., not exceeding 15cm deep and disposal of rubbish lead upto 500 m and lift upto 1 km, cleaning jungle including uprooting of rank vegetation , grass , brush wood ,trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared., providing and applying priming coat with ready mixed wood/ iron primer of approved brand (asian/berger/nerolac/ ici dulux) - iron work
Agency / Dept :
uranium corporation of india limited UCIL
Due Date :
Sep 18, 2026 (30 days left)
Tender Value :
5.52Cr
View Documents
T18 Ref No : 16652062
Location : ernakulam , kerala
LIVE TENDER
tender for repairs to false ceiling aluminium and wooden joineries rolling shutter iron doors and connected works at certain buildings in technical area at npol kochi
Agency / Dept :
military engineer services MES
Due Date :
Aug 28, 2026 (9 days left)
Tender Value :
21L
View Documents
T18 Ref No : 16651931
Location : tambaram , tamil nadu
LIVE TENDER
tender for repairs to wooden pvc and steel joinery cup boards rolling shutter iron gate and grill plastering masonry work etc in otm accn and repairs to drains culverts footpath and miscellaneous works of main camp and tech area at afs tambaram
Agency / Dept :
military engineer services MES
Due Date :
Aug 28, 2026 (9 days left)
Tender Value :
30L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16499481
Location : bangalore , karnataka
Source : GEM Tenders
LIVE TENDER
tender for removal of existing bituminous concrete layer , removal of existing synthetic astro turf surface , providing and laying bituminous concrete as per fih guidelines , removing and refixing of existing drain cover after relaying of hockey turf , earth work in excavation by mechanical or manual means in trenches or drains , providing and laying in position cement concrete of aggregate 40 mm , providing and laying in position cement concrete of aggregate 20 mm , steel work welded in built up sections or framed work , applying priming coat with ready mixed red oxide zinc chromate primer , painting with synthetic enamel paint , providing and fixing gi chain link fabric fencing of required width , supply and installation of fully computerized automatic and single key operation , supply, installation, testing and commissioning of 500 w led flood lights , supply, installation, testing and commissioning feeder pillar control panel , supply and installation of fih approved synthetic turf of green colour , supply installation testing and commissioning of dug out min 10 seating cap , supply and fixing of aluminium goal post for hockey , vendor to provide fih certification for global category , transportation charges of materials both removal and installation till site, re laying of existing astro turf hockey ground, removal of the existing bituminous concrete layer by milling machine to correct the ground gradient as per latest fih guidelines and removal of unserviceable materials from the site as per direction of tech rep or project officer including all costs loading and unloading carriage by mechanical means etc complete please refer to specification attached at appendix a ser no 1, removal of the existing synthetic hockey surface with rubber shock pad and disposal of the old unserviceable synthetic material including all costs loading and unloading carriage by mechanical means etc complete please refer to specification attached at appendix a ser no 2, providing and laying bituminous concrete strictly as per fih guidelines under the supervision of turf manufacturer representative or engineer using crushed stone aggregates of specified grading premixed with bituminous binder and filler transporting the hot mix to work site by tippers laying with paver finisher equipped with electronic sensor to the required grade alignment and level by special lazer equipment and rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction and density as per specification complete and as per the direction of tech rep or project officer 50 mm compacted thickness with bitumen of grade vg 30 at the rate 5 point 5 percent by weight of total mix and lime filler at the rate of 3 percent by weight of aggregate prepared in batch type hot mix plant of 100 to 120 tph capacity please refer to specification attached at appendix a ser no 3, removing of existing drain cover and refixing after relaying of hockey turf including cleaning and minor repair work of drainage system as per direction of tech rep or project officer 12 mm cement plaster of mix 1 ratio 4 with 1 cement ratio 4 fine sand please refer to specification attached at appendix a ser no 4, earth work in excavation by mechanical means hydraulic excavator or manual means in foundation trenches or drains not exceeding 1 point 5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto to 1 point 5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m all kinds of soil please refer to specification attached at appendix a ser no 5, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level 1 ratio 4 ratio 8 with 1 cement ratio 4 coarse sand ratio 8 graded stone aggregate 40 mm nominal size please refer to specification attached at appendix a ser no 6, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level 1 ratio 2 ratio 4 with 1 cement ratio 2 coarse sand ratio 4 graded stone aggregate 20 mm nominal size please refer to specification attached at appendix a ser no 7, steel work welded in built up sections or framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc as required in grating frames guard bar ladder railings brackets gates and similar works please refer to specification attached at appendix a ser no 8, applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron or steel works please refer to specification attached at appendix a ser no 9, painting with synthetic enamel paint of approved brand and manufacture to give an even shade with two or more coats on new work please refer to specification attached at appendix a ser no 10, providing and fixing gi chain link fabric fencing of required width in mesh size 50 mm x 50 mm with height upto 6 m behind the goal posts and 2 point 5 m along the sides including strengthening with 2 mm dia wire or nuts bolts and washers as required complete as per the direction of tech rep or project officer made of gi wire of dia 4 mm please refer to specification attached at appendix a ser no 11, supply and installation of fully computerized automatic and single key operation with 6 pop up sprinkler system having a radius of 41 m at 6 bar pressure discharge of water specifically designed for synthetic sports hockey surface including all their fittings and accessories including earth work in excavation and re filling hdpe pipe dia 150 or 110 mm class pe 100 grade 12 point 50 kg per sqm minimum including all charges etc complete please refer to specification attached at appendix a ser no 12, supply installation testing and commissioning of 500 watts led flood lights wipro or bajaj or crompton or any equivalent brand with 12 lights x 4 nos on existing poles all as complete as required to fix lights on these poles please refer to specification attached at appendix a ser no 13, supply installation testing and commissioning of feeder pillar time control panel 3 ph with 16 amps mcb and amp power contactor installation of 12 light fixtures interlink connection cable for lights up to control panel please refer to specification attached at appendix a ser no 14, supply and installation of fih approved global category synthetic turf of pile height 13 mm alongwith cast in situ shock pad of minimum 15 mm thickness on prepared bituminous surface maintaining international hockey federation fih specification including all marking on the surface complete as per the instruction of tech rep or project officer the work shall be executed by an fih certified field builder and colour of the turf will be green please refer to specification attached at appendix a ser no 15, supply installation testing and commissioning of dug out with minimum 10 seating capacity of ss 304 and covering with polycarbonate sheets of approved shade with special turf wheels for movements etc as per directions of tech rep or project officer please refer to specification attached at appendix a ser no 16, supplying and fixing of aluminium goal post for hockey as per drawing design and specifications approved by fih including all fittings and net etc all complete as per direction of the tech rep or project officer please refer to specification attached at appendix a ser no 17, vendor to provide fih certification for global category for the project after completion of all wks please refer to specification attached at appendix a ser no 18 payment will be released after confirmation is received from fih certification authority, transportation charges of materials till site for deliveries and removal of debris from site out side the cantt premises please refer to specification attached at appendix a ser no 19
Agency / Dept :
indian army
Due Date :
Sep 02, 2026 (14 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16665615
Location : belgaum , karnataka
Source : GEM Tenders
LIVE TENDER
tender for 2 point 6 feet brick wall construction along with plastering and 2 coats of painting for instructor cabin including material and labour , aluminium glass door for entrance of instructor cabin including material and labour , aluminium glass windows above surrounding walls as per site requirement , installation of working table for chief instructor using granite which includes vertical supports , single brick work for vip seating area along with plastering and 2 coats of painting , supply of 16 mm swr wire , supply of lane marker at pool 4 x 61mtr comma 4 x 35 mtr , pool dimension marking with paint in designated area , fabrication of slide area with aluminium glass structure , installation of aluminium grass shutters at the sliding tower , installation of side aluminium windows at the sliding point shed , installation of heavy duty iron pulley at the sliding points tower including material , installation of heavy duty iron pulley with 12 mm plates at top of monkey crawl towers points including material labour , welding of safety net structure at the base of sliding point , construction of new anchorage with rcc and heavy metal anchor , providing of heavy metal slides for swr wire , heavy duty harded pulley for 16mm swr rope , bulldog grip for swr wire , 16mm loop for swr wire , fabrication of standing platform for commandos to stand and slide , fabrication of metal structure to place the motor , installation of matting of walking area and steps with screw drilling on bars , fabrication and installation of iron hanger anchor to place towel , installation of additional iron support laders to climb towards the monkey crawl tower , fabication and installation of gi metal ladder to climb from pool to the tower , glass coverage of demonstration area , steel structure to place the water tank for snake pit 5 feet x 5 feet x 5 feet size with isa 50 x 50 x 5mm, procurement and upgradation of training infrastructure for confidence training area of new klp, as per technical specification
Agency / Dept :
indian army
Due Date :
Aug 24, 2026 (5 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16669757
Location : leh , ladakh
Source : GEM Tenders
LIVE TENDER
tender for aluminium and glass work for office with accessories , wooden book rack with glass shutter door , iron door with accessories , garden light fixing pole with installation , wire roll 90 mtr , casing and capping, aluminium and glass work for office with accessories, wooden book rack with glass shutter door, iron door with accessories, garden light fixing pole with installation, wire roll 90 mtr, casing and capping
Agency / Dept :
indian army
Due Date :
Aug 24, 2026 (5 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16670909
Location : korba , chhattisgarh
LIVE TENDER
tender for requirement for premises on lease and rental basis - invites proposals / offers in two bid system from owners/builders/developers having clear and marketable titles over land and built-up property at ground floor having carpet area of 1700 to 1930 sq. ft. approximately with sufficient parking and power connections as per load suggested by electricity board for proposed korba branch, dist- korba, chhattisgarh on lease basis at the korba branch, s. s. plaza, powerhouse road, korba, dist. korba, chhattisgarh - within 1 kilometer distance from the existing premises on ground floor, premises should be on main road preferably, parking space should be available near said premises, electricity and water should be available round the clock, premises should have proper drainage connection/sewage system and washroom for ladies and gents separately, vitrified flooring tiles (as per bank’s requirement) required for offered premises., collapsible grill gate for main entrance with rolling shutter to be provided by the landlord, all windows to be provided with iron grills, space for installing v-sat required at offered premises, separate electric meter in bank’s name with three phase connection for offered premises for branch to be provided by landlord as per required load, strong room to be constructed by landlord as per bank’s norms., minimum period of lease should be of 10 years (certain period).
Agency / Dept :
bank of baroda BOB
Due Date :
Aug 21, 2026 (2 days left)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Iron Shutter. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Iron Shutter sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Iron Shutter Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Iron Shutter, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Iron Shutter Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Iron Shutter Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Iron Shutter.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Iron Shutter depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Iron Shutter Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Iron Shutter bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Iron Shutter. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Iron Shutter, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Iron Shutter, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Iron Shutter?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Iron Shutter tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Iron Shutter?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Iron Shutter, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Iron Shutter is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All