sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

85Latest Iron bridge Tenders List

Latest Iron bridge Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Iron bridge tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Iron bridge tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Iron bridge Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Iron bridge tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Iron bridge Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Iron bridge Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Iron bridge Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Iron bridge tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Iron bridge Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Iron bridge sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Iron bridge tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Iron bridge tenders.

Is EMD mandatory for all Iron bridge tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Iron bridge work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Iron bridge tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Iron bridge Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17513492
Location : tiruchendur , tamil nadu
NEW TENDER
tender for providing temporary iron bridge arrangement in jj nagar carparking for shasti festival 2026 for arulmigu subramania swamy thirukkoil tiruchendur
Agency / Dept :
hindu religious and charitable endowments department HRCE
Due Date :
Oct 15, 2026 (16 days left)
Tender Value :
10.19L
View Documents
T18 Ref No : 17406263
Location : arath , jammu & kashmir
LIVE TENDER
tender for construction of iron foot bridge near h o syed shabir moosvi and others at mahwara budgam
Agency / Dept :
rural development and panchayati raj department
Due Date :
Oct 01, 2026 (2 days left)
Tender Value :
69.5K
View Documents
T18 Ref No : 17197001
Location : arath , jammu & kashmir
LIVE TENDER
tender for construction of protection bund from house of mohd irfan bhat to house of ali mohammad bhat near rawalpora canal at sekhpora kralpora b and improvement of lane/drain with iron mesh from bridge park to house of ali mohd at sekhpora kralpora b
Agency / Dept :
rural development and panchayati raj department
Due Date :
Sep 30, 2026 (1 day left)
Tender Value :
1.47L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17189431
Location : gopalganj , bihar
Source : GEM Tenders
LIVE TENDER
tender for function generator , dual power supply , digital multimeter , rf signal generator , regulated power supply , amplitude modulation demodulation trainer kit , fm trainer kit , trainer kit for fm modulator using ic 566 , trainer kit for fm demodulator using ic 565 , digital multimeter , soldering iron kit , bjt , mosfet , routers , smartphone , repeater , hub , switch , connecting cables and connectors , network bridge , any freeware , null modem cable , packet tracer , stepper motor , 7-segment led display , trainer board adc (0808) , trainer board dac (0808) , lcd trainer board , microcontroller board , sensors , jumper wire , galvanometer, resistance , voltmeter, ammeter, multimeter, function generator , rtd, thermistor kit , strain gauge kit , microwave test bench , klystron power supply , microwave test bench– x , vswr meter , frequency meter , pin modulator , synchro transmitter and receiver trainer kit , servo motor , on-off control kit, temperature sensor , pi controller kit, temperature sensor , pd controller kit, temperature sensor , pid controller kit, temperature sensor , plc , dual power supply , digital lcr meter , cathode ray oscilloscope (cro) , function generator , signal generator , digital ic tester , analog ic tester , smd soldering equipment , cables / connectors , television set , online ups , maintenance kit , tools , vacuum cleaner / blower
Agency / Dept :
department of science and technology DST
Due Date :
Sep 30, 2026 (1 day left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17396946
Location : banaskantha , gujarat
Source : GEM Tenders
LIVE TENDER
Tender For ITI DANTIWADA TOOLS EQUIPMENTS ITEM CALIPER INSIDE SPRING 15 CM , CALIPER HERMACHRODITE.SPRING 15 CM , CALIPER OUTSIDE SPRING 15 CM , DIVIDER SPRING 15 CM , SCRIBER 15 CM. KNURLED CENTER POSITION , SCREW DRIVER INSULATED 150 MMCHISEL HEAD , HAMMER BALL PEIN 1 LB WITH HANDLE , HAMMER BALL PEIN 0.5 LB WITH HANDLE , FILE FEATHER EDGE SMOOTH.150 MM , SOLDERING IRON 250 W WOODEN HANDLE , SCRAPER FLAT 12 MM X 150 MM. , POWER TOOL FOR FASTENING CAPACITY 10 TO 18MM , PROFILE GAUGES PLATE TYPE FOR DEMONSTRATION METRIC STANDARD , KNURLING TOOL - DIAMOND, STRAIGHT AND DIAGONAL , BORING BAR INDEXABLE WITH INSERT 25 MM SHANK , LAPPING PLATE 150 MM DIA , DRILLS GUAGE STRAIGHT SHANK LETTER SIZES A TO Z WITH GUAGE , DRILLS GUAGE STRAIGHT SHANK WIRE SIZE 1 TO 60 WITH GUAGE , DRILL GAUGE 1,5 TO 12.5 MM IN STEPS OF 0,5 MM , GLOBE VALVE CAST IRON FLANGED TYPE 150NB , GATE VALVE DIA FLANGED TYPE 150NB , STOP COCK 25NB 2-WAY, THREADED END , BEARING DIFFERENT TYPES EACH TYPE OF DIAMETER 25MM MIN. , TRAMMEL 30 CM , POKER - 900 MM LONG , SNIP STRAIGHT 300MM , HAMMER FLAT HEAD WITH HANDLE , SNIP BENT 250 MM , ANGLE PLATE ADJUSTABLE 250 X 150 X 175 , ARBOR PRESS HAND OPERATED 2 TON CAPACITY , CYLINDER LINER- DRY AND WET LINER, PRESS FIT AND SLIDEFIT LINER -EACH 1 , DRILL TWIST 1.5 MM TO 15 MM -VARIOUS SIZES BY 0.5 MM , FILES ASSORTED SIZES AND TYPES INCLUDING SAFE EDGE FILE SET OF 20 NOS , FUEL INJECTION PUMP DISMANTLING TOOL KIT- UNIVERSAL VICE , HAMMER CHIPPING 0.25 KG , JACK, HYDRAULIC HILIFT TYPE TROLLEY TYPE- 3 TON CAPACITY , MULTI SCAN TOOL , PNEUMATIC RIVET GUN , RIVET SETS SNAP AND DOLLY COMBINED 3,4,6 MM , SOLDERING IRON COPPER BIT 0.25 KG , SPANNERS SOCKET WITH SPEED HANDLE, T-BAR, RATCHET AND UNIVERSAL UPTO 32 MM SET OF 28 PIECES WITH BOX , STAR HEAD SCREW DRIVER SET OF 5 PIECES 100MM - 300MM , STARTER MOTOR CO- AXIAL TYPE , STARTER MOTOR PRE-ENGAGEMENT TYPE , WELDING HELMET FIBER , WELDING HAND SHIELD FIBER , CHIPPING HAMMER-with metal handle 250 Grams , DIVIDER-200 mm , SCRIBER-150 mm double point , FLAT TONGS-350mm long , HAMMER BALL PANE-1 kg with handle , TIP CLEANER , SPINDLE KEY , UNIVERSAL WELD MEASURING GAUGE , H.P WELDING TORCH-with 5 nozzles , Pre-heater For GMAW , AUTO DARKENING WELDING HELMET , HAND SHEARING MACHINE CAPACITY-cut 6 mm sheets and flats , CO2 cylinder , Argon gas cylinder , SWAGING AND FLOORING TOOL KIT 45 DEGREE TUBING-1 by 8 to 3 by 4 inch , Wheatstone Bridge , Cordless Drilling machine , Autotransformer , Solid State Solar Based Single Phase Energy Meter -Bidirectional , Meter Reading Instrument - MRI , Set of Wall jumper octagonal , Bus bar bending machine , Bus bar punching machine , Cu Strip -for earthing , Halogen Incandescent Lamp , Fluorescent tube , High- Pressure mercury vapor Lamp , High-pressure sodium Lamp , Low-pressure sodium Lamp , LED downlights , LED floodlights , LED spotlights , All types of LED sets , Bus bar with brackets , Solar DC pump , DC Power supply , Soft starter , Solar street light lamp set , Field regulator , Solar Street Light , Solar Traffic Light , Cables , RCC Pole with accessories -MS angle iron, C clamp, stay insulator etc. and materials 6 Mtr , Kilo Wattmeter Analog 0-1.5-3KW , suspension type insulators including hardware fitting , 3 Phase - Smart Energy Meter with overload, overcurrent, tempering, magnetic interference protection , GI pipe bending machine 19 mm to 32 mm , Multifunction meter , BLDC motor with controller 200 W , Servo motor with resolver 10 N-M , PMSM with controller 1 HP , MPPT based charge controller , Digital Timer On-delay and off-delay - 230V , Impulse relay 16 A, 230 V , Dusk and dawn switch 16, AS PER Uploaded Item Specification Document
Agency / Dept :
department of employment and training DET
Due Date :
Oct 06, 2026 (7 days left)
Tender Value :
8.72L
View Documents
T18 Ref No : 17460380
Location : hyderabad , telangana
Source : GEM Tenders
LIVE TENDER
tender for dc motor 24v 450w pmdc model , 40 ratio 1 gear ratio worm gear box , mosfet based h bridge motor driver circuit 24v dc , back emf protection circuit , fabrication of joystick model , sheet metal 1 point 2mm thickness 2ft x 2ft for making control box , spur gear for aamg rack gear modified gear for aamg rack gear en 18 grade metal gear , cnc laser cutting as per cad design for control box , trigger button 24v dc , 8mm metal plate 1ft x 0 point 5 ft hard plate with drilling and tapping , cnc laser cutting as per cad design for gun mounting , electric wire teflon 1 point 5 5sqmm , loom tape , variable auto transformer 415v 30 kva pure copper transformer mes lorry needs 3 phase so we need 3 nos , digital servo stabilizer control card display main pcb circuit board , 60 kva 100a 3phase mccb , metal cabin box 1 point 5 ft x 1 point 5ft x 1ft , protection circuit emi emc filter , output socket standard , external 4 core wire 4 sqmm , iron l channel frame 2 inch 10ft length tubler model of bmp tank fabrication , iron square frame 2inch 10ft length tubler model of bmp tank fabrication , iron round pipe 25mm dia length 10ft tubler model of bmp tank fabrication , iron patti 4 inch 10 ft length tubler model of bmp tank fabrication , iron sheet 2 mm 8 x 4 ft , red paint oxide , olive green paint , paint turpentine oil , iron l channel frame 1 inch 10ft for picket mechanism with pneumatic double acting solenoid electric dcv , iron l channel 1 point 5 inch 5 inch 10ft length for mounting for electronic control boxes , welding rods 3mm , grinding wheels , cutting wheels , air compressor 1hp 25 ltrs tank single phase motor , air pipe 12mm abs plastic , air on off valve , electric wire 1 point 5 5 sqmm wire bundle , nuts and bolts size m5 x 20mm , project display board with stand 4 x 3 with acp and vynyl sticker, trg aggregates for electronics engineering projects, 24 v dc 450 w pmdc motor rated speed torque as per manufacturer, worm gearbox 40 ratio 1 reduction ratio compatible with 24 v 450 w motor torque and mounting, 24 v dc mosfet h bridge suitable for 450 w motor pwm direction control with adequate current rating and protection, back emf suppression protection for 24 v dc motor transient voltage protection and suitable current handling, fabricated joystick assembly for motor control operation robust mechanical construction with suitable switches potentiometer sensors, ms sheet 1point2 mm thick 2 ft x2 ft suitable for fabrication of electrical control box, modified spur gear for aamg rack en18 steel machined to match rack profile and required module pressure angle, cnc laser cutting of ms sheet as per approved cad drawing dimensional accuracy and clean edges, 24 v dc trigger push button industrial duty suitable current rating and mounting arrangement, ms steel plate 8 mm thick 1 ft x 0point 5 ft drilled and tapped as per drawing, cnc laser cutting fabrication as per approved cad design for gun mounting assembly, teflon insulated copper wire 1point 5 sq mm, suitable for electrical control wiring and required voltage temperature rating, electrical wire loom/binding tape flame-retardant industrial grade suitable for cable harnessing, three phase 415 v input output variable autotransformer 30 kva pure copper winding suitable for 3 phase operation, main pcb control card with digital display for servo stabilizer compatible with specified stabilizer system and sensing control circuitry, 3phase mccb 60 kva application 100 a frame rated current suitable voltage breaking capacity and adjustable protection settings as required, ms metal enclosure, approximately 1point5 ft x 1point5 ft x 1 ft suitable for mounting electrical control components, emi emc mains filter for suppression of conducted electrical noise voltage current rating matched to system, std industrial electrical output socket voltage current rating compatible with eqpt, 4 core copper power cable 4 sq mm per core, suitable insulation and voltage rating for external wiring, ms l angle channel 2 inch 10 ft length suitable for structural tank frame fabrication, ms square tube 2 inch 10 ft length suitable for structural fabrication wall thickness as per approved design, ms round pipe 25 mm outside diameter 10 ft length suitable for structural fabrication, ms flat bar patti 4 inch wide 10 ft length, thickness as per structural design, ms sheet 2 mm thick standard 8 ft x4 ft size, red oxide metal primer suitable for ms iron surfaces anti corrosive industrial grade, olive green synthetic enamel metal paint industrial grade suitable for exterior metal finishing, turpentine mineral solvent suitable for thinning cleaning compatible oil based paint, ms l angle 1 inch 10 ft length suitable for picket mechanism frame and pneumatic valve mounting, ms l angle channel approximately 1point5 inch x 1point5 inch 10 ft length suitable for control-box mounting, mild steel welding electrodes 3 mm diameter suitable for smaw fabrication of ms structures, abrasive grinding wheels suitable for metal grinding fabrication compatible with grinder size and rated rpm, abrasive metal cutting discs suitable for ms steel compatible with cutting grinder machine and rated rpm, 1 hp single phase air compressor with approximately 25 l tank suitable pressure and airflow for pneumatic mechanism, 12 mm od abs plastic pneumatic tubing suitable for compressed air service and required pressure, pneumatic air isolation on off valve suitable pressure rating and 12 mm tubing connection, copper electrical wire 1 point 5 sq mm insulated supplied as bundle suitable for control power wiring, m5 x 20 mm nuts and bolts steel suitable for equipment control box mounting washers as required, display board approximately 4 ft x 3 ft with stand acp sheet and vinyl graphics sticker
Agency / Dept :
indian army
Due Date :
Oct 03, 2026 (4 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17460442
Location : ahmedabad , gujarat
Source : GEM Tenders
LIVE TENDER
tender for trainee raw materials - modulery remote control switch for 2 lights and 1 fan with humree fan regulation with remote , ms angle , ms pipe dia 25 mm , ms pipe dia 50 mm 2 mm wt , ms round bar dia 10 x 100 mm , ms square 25 x 25 mm , ms square bar 14 mm , multi core wire 6 x 4 inch , oil kerosene , paper cutter steel body , perforated cable tray depth 1.5 inch width 2 inch thick 2 inch , ph colour chart , ph reagent , pipe bracket set with clamp , ppr pipe dia 0.5 inch , ppr pipe dia 1 inch , race way depth1.5 inch width 2inch thick 2 mm , resistor scr , rj 45 connector , scr different types of tyn6004 and 612 and c106 and mcr21813 each 40 nos , seat cover for splendor bike , sensor assorted analog , sensor assorted digital , smd components , smd ics assorted , sulfuric acid , sw pipe dia 75 and 900 mm x 3 , thermal paste for processor , thermister t 320 , top , transformer 6 0 6v and 12 0 12v and 0 12vand 0 6v and 0 9v and 500ma each of 50 , transformer 9 0 9 and 12 0 12 each of 20 , transformer 12v , transistor photo type , upvc pipe 0.5 inch , triac bt 136 and bta12 and tic20d , two wheel wiring electric coupler male female , water media stadler pencil colour set of 24 , water pressure gun , waterproof car cover for tata tiago ev , wiper blade for jetta volkswagon car , wiper blade ds 21 inch x ps 19inch , wire mesh cable tray depth1.5 inch and width 2 inch and thickness 2 mm , wooden board 250 mm x 250 mmx40 mm , wooden patti 300 x 50 x 20 mm , wooden patti 600 x 50 x 20 mm , wooden patti 25 x25 x300 mm size , casing capping 1 inch , abonite 2 mm thick sheet 120 x120 mm , cotton sleeve for wire 5 mm , crochet hooks set , diac db2023 , earth rod 13 mm dia alluminium , earthing chemical , fiber wedge for windings , gi sheet 8 x 4 ft and 0.5 mm , iron clad cut out 16 a , kit not gate , kit or gate , lamp 100 w , lamp or bulb 12 v , laser pointing pen , mintex insulation paper , ms round bar dia 45 mm , nail 17 x 1 , neutral link 16 a , puncture repair kit for tubeless , resistors , resistors vdr , sata cable , scr tyn604 , seal of jumper oil bike , tailors chalk , thermistor 200v , transformer 12 0 12v , tube choke 40 w , earthing clip , alluminium channel for spotlight black color 1 meter length , kit complete full adder , kit complete of introduction smd component , kit complete using ic7408 and ic7486 half adder circuit , kit complete using ic7408 and gate , kit complete using ic7437 and or gate circuit , kit complete using triac bt136 and diac db3 and db36 simple dimmer, accelator cable of splendor bike, alum, 10 swg, 14 swg, 4 mm 8 swg, 22 swg, 16 guage, batteries charger for aa and aaa, bleaching water, bread board, assorted value, capacitors assorted, rh 12 x 12 x 150 mm, v tool 12 x 12 x 150 mm, chart of various deficiency disease, chart on malnutrition, chart on nutrition, 50 x 75 mm, ci oval flange, 4 inch, ci round flange, color acrylic set of 12, color artist water 15 ml, color fabric shade 24, color oil pastel set of 24, desolder wire, assorted 1n4007 and 1n5408 and 1n4148 and by127 and 4001 each 10, drawing chart, drawing kit, imperial size, bright colours anchor, engineering drawing box teaching purpose, fan rubber clamp with special fan rod nut bolt and locking pins, four jaw lathe chuck key, four jaw lathe chuck screw, 5 a, gi sheet 28 guage 8feet x 4feet, 14 swg, 8 swg, hook up wire, set 0 to 13, hss machine hacksaw blade 10 tpi 18x1.25 inchx0.062, ic 7805 and 7809 and 7812 and 7815 and 7905 and 7909 and 7912 with heat sink each of 20, ic 8051 microcontroller, assorted value, ic um66, igbt m232 and m303a and m233 and m127, assorted values, jewellery kit, jumper cable maruti, jumper cable for volkswagan jetta, kit and gate, kit bridge rectifier, kit full wave rectifier, kit transistor as an electronic switch, ladder cable tray depth 1.5 inch width 2 inch thick 02 mm, 200 w, 25w, led ir, litmus paper, measure tape tailoring, 20 mm dia, 6a, module arduino stepper motor, modulery remote control switch for 2 lights and 1 fan with humree fan regulation with remote, 25 x 25 x 3 mm, dia 25 mm, dia 50 mm 2 mm wt, dia 10 x 100 mm, 25 mm, 14 mm, 6 x 4 inch, oil kerosene, paper cutter steel body, depth 1.5 inch width 2 inch thick 2 inch, ph colour chart, ph reagent, pipe bracket set with clamp, dia 0.5 inch, dia 1 inch, depth1.5 inch width 2inch thick 2 mm, resistor scr, rj 45 connector, scr different types of tyn6004 and 612 and c106 and mcr21813 each 40 nos, seat cover for splendor bike, assorted analog, assorted digital, smd components, assorted, sulfuric acid, sw pipe dia 75 and 900 mm x 3, thermal paste for processor, thermister t 320, 1 pin 6 amp, transformer 6 0 6v and 12 0 12v and 0 12vand 0 6v and 0 9v and 500ma each of 50, transformer 9 0 9 and 12 0 12 each of 20, 12v, photo type, 0.5 inch, triac bt 136 and bta12 and tic20d, two wheel wiring electric coupler male female, water media stadler pencil colour, water pressure gun, waterproof car cover for tata tiago ev, wiper blade for jetta volkswagon car, wiper blade ds 21 inch x ps 19inch, wire mesh cable tray depth1.5 inch and width 2 inch and thickness 2 mm, 250 mm x 250 mmx40 mm, 300 x 50 x 20 mm, 600 x 50 x 20 mm, 25 x25 x300 mm, casing capping 1 inch, abonite 2 mm thick sheet 120 x120 mm, 5 mm, crochet hooks set, diac db2024, 13 mm, earthing chemical, fiber wedge for windings, gi sheet 8 x 4 ft and 0.5 mm, iron cladcut out 16 a, kit not gate, kit or gate, 100 w, 12 v, laser pointing pen, mintex insulation paper, dia 45 mm, 17 x 2, 16 a, puncture repair kit (tubeless), resistors ldr, resistors vdr, sata cable, scr tyn605, seal of jumper oil bike, tailors chalk, 200v, transformer 12 0 12v, 40 w, earthing clip, alluminium channel for spotlight black color 1 meter length, kit complete full adder, kit complete of introduction smd component, kit complete using ic7408 and ic7486 half adder circuit, kit complete using ic7408 and gate, kit complete using ic7437 and or gate circuit, kit complete using triac bt136 and diac db3 and db36 simple dimmer circuit, polypropline roundbar dia 50 mm
Agency / Dept :
department of employment and training DET
Due Date :
Oct 09, 2026 (10 days left)
Tender Value :
5L
View Documents
T18 Ref No : 17460449
Location : umarpada , gujarat
Source : GEM Tenders
LIVE TENDER
tender for tools equipment for different trade of iti - micrometer outside digital 0 to 25 mm reading 0.01 mm , mallet barwood 1 kg. 75 mm x 15 mm , earth copper plate 60cm x 60cm x 3.15 mm , pipe vice cast iron with hardened jaw open type 100mm , digital lux meter lcd read out 0.05 to 7000 lumens with battery. , pump electric 1 hp. , bus bar with brackets 1 mtr , wheatstones bridge , solid state solar base single phase energy meter , hydraulic crimping tool for ug 20sq mm to 250sq mm cable crimping with bits , geyser 10 liter 240 v storage type , multimeter 0 to 1000 m ohms 2.5 to 5000 volt , clipon clamp ammeter 0-25 amp,0-200amp , crimping tool for crimping 16 sq mm to 95 sq.mm , coil winding machine manual , d.c a.c. ammeter 0-500 ma , mixture mixer grinder 750 w, 240 v , bradawl 150 mm x 6mm square pointed , rawl punch holder and bits no. 8,10 , voltmeter m.c.0.-300 volts , voltmeter centre zero 15-0-15 volts , voltmeter m.i. multirange 0-150,300,600 v , frequency meter 45 to 55 hz , ammeter m.i. 0-5 amp.panel board type , hydrometer , twist drill bits 6,8,10,12, mm , small crimping tools assorted 10 - 100 mm 5nos set , rawl punch holder and bits no. 8,10,14,16 , scissors 200 mm , rotary switch 16 amp , over load relays , earth gi plate 60cm x 60cm x 6mm , earth electrode primary electrode 2100x28x3.25mm , earth electrode secondary cu strip 20x5mm , capacitors electrolytic ceramic polyester film variable dual run , various electronic components resistors, diode, transistor, ujt, fet, scr, diac, traic, igbt, small transformer , safety belt with provision for keeping tools , solar charge controller with manual switch day lighting 12 v 10 a , halogen incandescent lamp , lamp cfl 5 watt, 15 watt , 25 watt set , heating plates electric 1000 watts. , drill s.s. twist block 2 mm, 5 mm and 6 mm set of 3 , rubber mat , voltmeter centre zero 100-0-100 mv , tong tester 0 - 100 a multi range , phase sequence indicator 3 phase, 415 v , tempreture controlled soldering iron 50w, 230 v , techometer analog type - 10000 rpm, micrometer outside (digital) 0 to 25 mm reading 0.01 mm, mallet barwood 1 kg. (75 mm x 15 mm), earth copper plate 60cm x 60cm x 3.15 mm, pipe vice cast iron with hardened jaw open type 100mm, digital lux meter lcd read out 0.05 to 7000 lumens with battery., pump electric 1 hp., bus bar with brackets 1 mtr, wheatstones bridge, solid state solar base single phase energy meter (bidirectional)5-30amops,240v, hydraulic crimping tool for ug 20sq mm to 250sq mm cable crimping with bits, geyser 10 liter 240 v (storage type), multimeter 0 to 1000 m ohms 2.5 to 5000 volt, clipon (clamp) ammeter 0-25 amp,0-200amp, crimping tool for crimping 16 sq mm to 95 sq.mm, coil winding machine (manual)., d.c / a.c. ammeter 0-500 ma, mixture/mixer grinder 750 w, 240 v, bradawl 150 mm x 6mm square pointed, rawl punch holder and bits (no. 8,10), voltmeter m.c.0.-300 volts, voltmeter centre zero 15-0-15 volts, voltmeter m.i. multirange 0-150,300,600 v, frequency meter 45 to 55 hz, ammeter m.i. 0-5 amp.panel board type, hydrometer, twist drill bits 6,8,10,12, mm, small crimping tools (assorted) 10 - 100 mm (5nos) set, rawl punch holder and bits (no. 8,10,14,16), scissors 200 mm, rotary switch 16 amp, over load relays, earth gi plate 60cm x 60cm x 6mm, earth electrode primary electrode 2100x28x3.25mm, earth electrode secondary cu strip 20x5mm, capacitors electrolytic ceramic polyester film variable dual run, various electronic components resistors, diode, transistor, ujt, fet, scr, diac, traic, igbt, small transformer, safety belt with provision for keeping tools, solar charge controller with manual switch ( day lighting) 12 v 10 a, halogen incandescent lamp, lamp cfl 5 watt, 15 watt , 25 watt set, heating plates (electric) 1000 watts., drill s.s. twist block 2 mm, 5 mm and 6 mm set of 3, rubber mat 60 x 120 x 2.5 cm (2x4x1), voltmeter centre zero 100-0-100 mv, tong tester ( 0 - 100 a multi range ), phase sequence indicator 3 phase, 415 v, tempreture controlled soldering iron 50w, 230 v, techometer analog type - 10000 rpm
Agency / Dept :
department of employment and training DET
Due Date :
Oct 09, 2026 (10 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17470808
Location : anand , gujarat
Source : GEM Tenders
LIVE TENDER
tender for tools equipment boq bid hammer cross pein 220 grams or 250 grams or 0.5 lb with handle , chisel cold flat 25 mm x 200 mm , allen key set - hexagonal - 1 - 12 mm, set of 12 keys , bradawl 150 mm x 6mm square pointed , mallet hard wood 0.50 kg. , hacksaw frame fixed type 150 mm , plier flat nose length 200 mm insulated , drill hand brace 0 to 100 mm , plane- jack 200 mm x 50 mm , plane smoothing, metal 200 mm x 50 mm cutter , cut out relays , reverse current relays , under voltage relays , knife switch dpdt fitted with fuse terminals 16 amp , knife switch tpdt fitted with fuse terminals16 amp , d.c. starters-4-points for 2.5 kw dc motor , ac starter resistance type starter , electric iron 1200 w, 230 v with temprature control. , immersion heater 1500 w -230 v , mixture or mixer grinder 750 w, 240 v , voltage stabiliser input 150 to 230 volt ac, output 220 volt ac , anvil 50 kgs , tong flat.200 mm long , simple machines screw jack with accessories , thermocouples j k r s b type each , steam generator copper for steam distilation. cap 1000 ml , searles apparetus for youngs modulus , redwood viscometer , test tube holders , caliper inside spring type. 150 mm , caliper hermaphrodite spring type 150 mm , scriber 150 mm , dot punch 100 mm , file knife edge smooth 150 mm , machine reamer parallel helical flute 12 to 16 mm set of 5 , scraper half round 150 mm , chisel cold crosscut and diamond point 9 mm x 150 mm , chisel cold round nose 9 mm x 100 mm , fire buckets with stand , power tools for fastening capacity 10 to 18mm , pipe threading die with handle ratchet type die head of one by two inch, three by four inch, one inch complete set , planishing hammer , engineers try square knife edge 150 mm blade , cut section gate valve 2 inch , cut section globe valve 2 inch , cut section safety valve 2 inch , cut section needle valve 25 mm cut section made up s.s. of 2 inch , cut section butter fly valve 2 inch , cut section non return valve 2 inch , cut section pneumatically operated diaphragm valve 2 inch , cut section ball valve 2 inch , cut section diaphragm valve 2 inch , cut section model of screw pump , vane pump cut section sliding type , cut section model of reciprocating pump , cut section of gear box planetary bevel gear type , cut section model of centrifugal pump back pullout type , scraper flat 250mm handled , knife electrician d.b. , screw driver set set of 5 100 to 300 mm , conduit pipe cutting and threading machines adjustable for 15 mm to 30 mm , hot wire ammeter 0 to 15 amps , wheatstone bridge , autotransformer 250v 10a , solid state solar based single phase energy meter bidirectional 5 to 30 amps 240 volts , magnetic flux meter 0 to 500 tesla , small crimping tools assorted 10 to 100 mm 5 nos , motion detector , soft starter 1 ph , field regulator 0 - 1000 ohmic, 2 amps , dmx controller , rewinding machine, hammer cross pein 220 grams or 250 grams or 0.5 lb with handle, chisel cold flat 25 mm x 200 mm, allen key set - hexagonal - 1 - 12 mm, set of 12 keys, bradawl 150 mm x 6mm square pointed, mallet hard wood 0.50 kg., hacksaw frame fixed type 150 mm, plier flat nose length 200 mm insulated, drill hand brace 0 to 100 mm, plane- jack 200 mm x 50 mm, plane smoothing, metal 200 mm x 50 mm cutter, cut out relays, reverse current relays, under voltage relays, knife switch dpdt fitted with fuse terminals 16 amp, knife switch tpdt fitted with fuse terminals16 amp, d.c. starters-4-points for 2.5 kw dc motor, ac starter resistance type starter, electric iron 1200 w, 230 v with temprature control., immersion heater 1500 w -230 v, mixture or mixer grinder 750 w, 240 v, voltage stabiliser input 150 to 230 volt ac, output 220 volt ac, anvil 50 kgs, tong flat.200 mm long, simple machines screw jack with accessories, thermocouples j k r s b type each, steam generator copper for steam distilation. cap 1000 ml, searles apparetus for youngs modulus, redwood viscometer, test tube holders, caliper inside spring type. 150 mm, caliper hermaphrodite spring type 150 mm, scriber 150 mm, dot punch 100 mm, file knife edge smooth 150 mm, machine reamer parallel helical flute 12 to 16 mm set of 5, scraper half round 150 mm, chisel cold crosscut and diamond point 9 mm x 150 mm, chisel cold round nose 9 mm x 100 mm, fire buckets with stand, power tools for fastening capacity 10 to 18mm, pipe threading die with handle ratchet type die head of one by two inch, three by four inch, one inch complete set, planishing hammer, engineers try square knife edge 150 mm blade, cut section gate valve 2 inch, cut section globe valve 2 inch, cut section safety valve 2 inch, cut section needle valve 25 mm cut section made up s.s. of 2 inch, cut section butter fly valve 2 inch, cut section non return valve 2 inch, cut section pneumatically operated diaphragm valve 2 inch, cut section ball valve 2 inch, cut section diaphragm valve 2 inch, cut section model of screw pump, vane pump cut section sliding type, cut section model of reciprocating pump, cut section of gear box planetary bevel gear type, cut section model of centrifugal pump back pullout type, scraper flat 250mm handled, knife electrician d.b., screw driver set set of 5 100 to 300 mm, conduit pipe cutting and threading machines adjustable for 15 mm to 30 mm, hot wire ammeter 0 to 15 amps, wheatstone bridge, autotransformer 250v 10a, solid state solar based single phase energy meter bidirectional 5 to 30 amps 240 volts, magnetic flux meter 0 to 500 tesla, small crimping tools assorted 10 to 100 mm 5 nos, motion detector, soft starter 1 ph, field regulator 0 - 1000 ohmic, 2 amps, dmx controller, rewinding machine
Agency / Dept :
department of employment and training DET
Due Date :
Oct 08, 2026 (9 days left)
Tender Value :
4.95L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17462763
Location : dimapur , nagaland
Source : GEM Tenders
LIVE TENDER
corrigendum tender for super structure tower height 7 mtr for fsb make as per annx i of ts , super structure assy deck panel type 1 point 5 into zero point 6 into 4 point 12 mtrs is 432 part i 1982 make as per annx i of ts , decking 4mm chequered plate , ms railing post 50 into 50 into 6 angle 1 mtrs height is 432 part i 1982 , iron railing 50 into 50 into 6 angle 70 mtrs is 432 part i 1982 , decking panel joining member 75 into 75 into 6mm 1 mtrs lengh is 432 part i 1982 make as per annx i , nut and bolts 50 into 10mm dia , deck fixure arrangement clamp , nut and bolts dia 16mm to 50mm length , base plate 20mm thick 300mm into 300mm with 25mm hole , foundation bolt 25mm dia 450mm lengh , top pully saddle seave 75mm dia , steel wire rope for main rope 30mm , steel wire rope for suspender 16mm , eye bolt transum 90mm into 20mm heavy duty , wire rope grip 12mm secure , prefabricated and modified anchor main 35mm dia ms shaft 20mm ms plate of length 1 point 5 mtr gravity type anchorage , u clamp suspendor arrangement , d shackle 20 ton , tum buckle haevy duty , wire rope grip 30mm secure , nut and bolt 16mm dia , swr thimble heavy duty for 30mm , swr thimble heavy duty for 16mm , moris block 5 ton capacity , spanner for 20mm bolts , spanner for 16mm bolts , adustable spanner 12 inch , prefabricated roller 10 ton , heavy duty hook pully 5 ton , hand held grinder cutter 1800w 11500 rpm 125mm dia , grinder cutter blade dia 125mm make as per annx i of ts , portable welding machine arc 220a heavy duty igbt welder 220 v , welding rod 60 pcs size 4mm into 450mm in one pkt , plaster 6 inches material wooden heavy duty wooden hand float trowel 10 inch into 6 inch polished wood plastering , plaster 8 inches material wooden heavy duty wooden hand float trowel 10 inch into 6 inch polished wood plastering , hand gloves masonery work flocked liner neoprene over latex coating safety gloves , spirit level 3 feet , spanner set no 8 and 6 to 22mm conf to is 2028 , plumbob with kanda and 2 mtr thread made of mild steel max wt 250gm , iron tasala , iron bucket 15 kg , nylon rope , pick axe , phowda , heavy duty hand hammer having cast iron appx 200 into 200 and weight 12 kg with 1200mm long , showel , ms crow bar 4 feet long 32mm dia , measuring tape 50 mtr , iron trowels 4 inches , iron trowels 6 inches , brick hammer weight 5 kg , double wheel concrete trolley hvy duty ms steel 80 to 100 ltr capacity , cutoff saw 16 inches metalic cutter , bosch cutoff saw 16 inches metalic cutter blades , screw driver set make as per appx i of ts , cutting plier make as per appx i of ts , wire cutter make as per appx i of ts , water level 75 mtr 8mm dia pipe for water level , cement ppc 43 grade hdpe 50 kg wt conf to is 8112 to 1989 , course sand , aggregates 20mm , aggregates 40mm , aggregates 63mm , mild steel bar of size 8mm dia conf to is 432 part i 1982 , mild steel bar of size 12mm dia conf to is 432 part i 1982 , mild steel bar of size 16mm dia conf to is 432 part i 1982 , ms binding wire , gi chainlink fencing 50 into 50mm dia 3 point 80mm swg , 8mm dia ms plane bar for tie rod for chain link fencing , og colour synthetic enamel paint 20 ltr , red oxide primer 20 ltr , thinner 20 ltr , roller brush 12 inch , roller brush 4 inch , roller brush 2 inch, provision of foot suspension bridge items at 56 inf div aor, super structure tower height 7 mtr for fsb make as per annx i of ts, super structure assy deck panel type 1 point 5 into zero point 6 into 4 point 12 mtrs is 432 part i 1982 make as per annx i of ts, decking 4mm chequered plate, ms railing post 50 into 50 into 6 angle 1 mtrs height is 432 part i 1982, iron railing 50 into 50 into 6 angle 70 mtrs is 432 part i 1982, decking panel joining member 75 into 75 into 6mm 1 mtrs lengh is 432 part i 1982 make as per annx i, nut and bolts 50 into 10mm dia, deck fixure arrangement clamp, nut and bolts dia 16mm to 50mm length, base plate 20mm thick 300mm into 300mm with 25mm hole, foundation bolt 25mm dia 450mm lengh, top pully saddle seave 75mm dia, steel wire rope for main rope 30mm, steel wire rope for suspender 16mm, eye bolt transum 90mm into 20mm heavy duty, wire rope grip 12mm secure, prefabricated and modified anchor main 35mm dia ms shaft 20mm ms plate of length 1 point 5 mtr gravity type anchorage, u clamp suspendor arrangement, d shackle 20 ton, tum buckle haevy duty, wire rope grip 30mm secure, nut and bolt 16mm dia, swr thimble heavy duty for 30mm, swr thimble heavy duty for 16mm, moris block 5 ton capacity, spanner for 20mm bolts, spanner for 16mm bolts, adustable spanner 12 inch, prefabricated roller 10 ton, heavy duty hook pully 5 ton, hand held grinder cutter 1800w 11500 rpm 125mm dia, grinder cutter blade dia 125mm make as per annx i of ts, portable welding machine arc 220a heavy duty igbt welder 220 v, welding rod 60 pcs size 4mm into 450mm in one pkt, plaster 6 inches material wooden heavy duty wooden hand float trowel 10 inch into 6 inch polished wood plastering, plaster 8 inches material wooden heavy duty wooden hand float trowel 10 inch into 6 inch polished wood plastering, hand gloves masonery work flocked liner neoprene over latex coating safety gloves, spirit level 3 feet, spanner set no 8 and 6 to 22mm conf to is 2028, plumbob with kanda and 2 mtr thread made of mild steel max wt 250gm, iron tasala, iron bucket 15 kg, nylon rope, pick axe, phowda, heavy duty hand hammer having cast iron appx 200 into 200 and weight 12 kg with 1200mm long, showel, ms crow bar 4 feet long 32mm dia, measuring tape 50 mtr, iron trowels 4 inches, iron trowels 6 inches, brick hammer weight 5 kg, double wheel concrete trolley hvy duty ms steel 80 to 100 ltr capacity, cutoff saw 16 inches metalic cutter, bosch cutoff saw 16 inches metalic cutter blades, screw driver set make as per appx i of ts, cutting plier make as per appx i of ts, wire cutter make as per appx i of ts, water level 75 mtr 8mm dia pipe for water level, cement ppc 43 grade hdpe 50 kg wt conf to is 8112 to 1989, course sand, aggregates 20mm, aggregates 40mm, aggregates 63mm, mild steel bar of size 8mm dia conf to is 432 part i 1982, mild steel bar of size 12mm dia conf to is 432 part i 1982, mild steel bar of size 16mm dia conf to is 432 part i 1982, ms binding wire, gi chainlink fencing 50 into 50mm dia 3 point 80mm swg, 8mm dia ms plane bar for tie rod for chain link fencing, og colour synthetic enamel paint 20 ltr, red oxide primer 20 ltr, thinner 20 ltr, roller brush 12 inch, roller brush 4 inch, roller brush 2 inch
Agency / Dept :
indian army
Due Date :
Sep 29, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Iron Bridge. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Iron Bridge sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Iron Bridge Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Iron Bridge, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Iron Bridge Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Iron Bridge Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Iron Bridge.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Iron Bridge depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Iron Bridge Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Iron Bridge bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Iron Bridge. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Iron Bridge, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Iron Bridge, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Iron Bridge?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Iron Bridge tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Iron Bridge?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Iron Bridge, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Iron Bridge is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All