sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

18Latest Iron bed repair Tenders List

Latest Iron bed repair Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Iron bed repair tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Iron bed repair tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Iron bed repair Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Iron bed repair tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Iron bed repair Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Iron bed repair Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Iron bed repair Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Iron bed repair tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Iron bed repair Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Iron bed repair sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Iron bed repair tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Iron bed repair tenders.

Is EMD mandatory for all Iron bed repair tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Iron bed repair work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Iron bed repair tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Iron bed repair Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16813008
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
LIVE TENDER
tender for almirah large with shelves steel , book case small , charpoy ip with hard top , locker bed side steel , rack adjustable 6 tier steel , table dressing gents with mirror , table dressing ladies with mirror , table dining 4 person , table writing med , teapoy wooden , hat stand with mirror , sofa set 5 seater , chair computer , rack shoe steel , table bed side , bin solied linen multi purpose, special repair surveyed off condemned furniture for the qe jun 2025 under ge minniebay, dimension overall size shall be 1985mm high comma 920mm wide and 485mm deep. description the base shall be made of two numbers mild steel sheet channel bases made in u shaped with ends covered. mild steel sheet shall be 1mm thick. the base channel shall be welded at 50mm from each end of the length of 920mm and shall be up to full width of 485mm and shall be 100mm high top comma sides bottom and back of almirah shall be of 1mm thick mild steel sheet. four shelves equally spaced of 1mm thick mild steel sheet shall be provided to make five compartments. front shutter shall two leaves of equal size. front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung. all joints and welding and fixing shall be done in accordance with the standard workmanship. handle one chromium plated steel handle with a locking device shall be provided as shown on drawing. locking device the locking device shall be three way locking device and shall also be provided with decorative key plate. finish all steel surfaces shall be painted with two coats of smoke grey paint internally and extrenally with spray machine over a coat of red oxide primer after preparation of surfaces. a mark of mes shall also be provided on top left corner of front shutter with visible colour. painting shall be done with spray machine. rest all as per drg., overall size shall be 1025mm long comma 450mm wide and 750mm high. back shall be 1025 mm long and 750 mm high made out of prelaminated hdf board bd 18mm thick one side teak comma walnut and other side balancing white comma rest all as per drg and as directed by engr in charge., overall size shall be 1980mm long comma 900mm wide and 440mm high. two long rails and two short rails shall be of 25mmx65mmx16 gauge ms rectangular pipe. the legs shall be of size 32mmx32mmx16 gauge welded to long and short rails as shown on drg.two stiffeners of size 25mmx25mmx16 gauge shall be provided in equidistant between two opposite long rails. six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. two stiffeners joining legs of size 25mmx25mmx16 gauge shall be provided at 150mm from ground level. 12mm thick bwr plywood shall be provided for top as shown on drg with proper nut and bolt .one nut and bolt shall also be provided at centre of each stiffeners for fixing the plywood irrespective of what is shown on drg. pvc hard rubber shoes shall be fixed at bottom of each leg. all steel surfaces shall be painted with synthetic enamel paint black in color after applying a coat of primer. rest all as per drg, dimension overall size shall be 760mm long comma 600mm wide and 1100mm high. description the locker shall be made of mild steel sheet 1mm thick. 20 mm dia conduit pipe shall be chrome plated with wall thickness of 1 point 6 mm shall be fixed with side sockets. two handles chromium plated 100mm long shall be fixed to shutters with necessary riveting. one hasp and staple 75mm long shall also be fixed to shutters with riveting. the left shutters shall be provided with 100mm long tower bolt inside at upper and lower ends also. the locker shall be provided with compartments as shown in drgs made of 1mm ms sheet. finish all steel surface internally and externally comma exposed to view when placed in position shall be given two coats of smoke grey paint internally and externally after properly smoothened the surface with sand paper and applying putty. painting shall be done with spray machine. rest all specifications are as per drg., dimension overall size shall be 915mm long comma 610mm wide and 1905mm high. description the entire rack shall be made of 1mm mild steel sheet. the sides shall be provided with 40x40x4mm angle iron welded to 1 point 00mm thick ms sheet. 75x75x3mm thick flat iron cut to shape shall be welded at front corner. all partitions shall also be made of 1mm thick mild steel sheet and shall be riveted to side of rack. all dimensions comma shape and size shall be followed as per drg. all joints comma fixing shallbe done in accordance with standard specifications. rest all as shown on drg. finish all steel surfaces exposed to view when placed in position shall be painted with two coats of smoke grey hammer paint internally and extrenally with spray machine after preparation of surfaces. painting shall be done with spray machine. rest all as per drg., all as per drg comma the frame shall be strictly as per drg wallet oblique teak colour as approved. the mirror shall be of 5mm thickness of make modiguard oblique saint gobain all shown on drg and as directed by engr in charge., the overall size of the table dressing shall be 1150mm long 380mm wide and 1700mm high. the sides comma top comma back and front of the base unit shall be of 18mm thick prelaminated mdf board. the bottom of the side units shall be of 12mm thick mdf board. the sides and back of drawers shall be of 12mm thick prelaminated mdf comma bottom of the drawers shall be of 6mm thick commercial ply whereas the front of the drawers shall be of 18mm thick prelaminated mdf board. 5mm thick electro copper plated mirror shall be fixed over 6mm thick plywood back. track rails 25mm x 25mm in section on one side telescopic channel of make hettick oblique ebbco comma on two vertical. the overall size of the stool shall be 440mm long 350mm wide and 425mm high. the four sides shall be of 18mm thick prelaminated mdf. the top of the stool shall be of 12mm thick plywood openable as shown in drg. four heavy duty revolving nylon double wheels shall be provided at base below the 6mm base ply fixed over wooden runner 20 mm x 20 mm. the seat of the stool shall be 75mm high comma made of foam 40 density covered with tapestry cloth as approved by engr in charge oblique ge. rest all as per drg., all as per drg comma the wood shall be 1st class hard wood teak free from any joints cracks and knots. the top shall be made out of 18mm thick mdf board exterior grade one side teak lamination in wange oblique wallet as approved colour and one side white lamination. all exposed edges of ppb shall be provided wooden beading of teak wood 4mm thick x 18mm wide duly polished with matching colour the frame shall be polished after prepration of surfaces with two or more coats of brown oblique walnut colour melamyne polish with spray machine as per the requirement to its glossy look. rest all as shown on drg and as directed by engr in charge., dimension overall size shall be 1145mm long comma 600mm wide and 760mm high. description all wood shall be of first class hard teak wood except top and right hand side drawer cabinet. legs shall be of 35mmx55mm in section and 717mm high having 5mmx5mm in section groove at the top of legs at the portion when placed in position. the top shall be of 18mm thick of approved shade and the edges shall be covered with 4mm thick teak wood beading. two short stiffeners of teak wood of size 50mmx40mm in section irrespective of what is shown on drg shall be provided between legs at 100mm from bottom of legs. sides of the box which house the drawer and cabinet shall be 18mm thick bwr grade plywood sides and back of drawers shall be of 12mm thick teak wood planks. bottom of drawers shall be of 6 mm thick plywood commercial. 6mm thick plywood commercial 75mm high partition shall be provided in the drawer. shutter for cabinet shall be fixed with piano type continuous hinges. lock shall be provided to drawer and shutters. recessed handle shall be provided to drawer and shutter. 25mm dia and 25mm high rubber shoes shall be fixed to bottom of legs. finish all wood surfaces shall be melamyne polished with high gloss finishby spray machine. rest all as per drg., dimension the overall size shall be 600mm long comma 450mm wide and 540mm high. description the legs shall be 60mmx30mm in section and 497 mm high and shall be of teak wood. 5mmx5mm in section groove shall be provided at the visible portion of top of legs. top rails of teak wood of 20mmx50mm in section and 510mm long shall be provided between the legs. bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. a centre rail of size 20mmx50mm shall also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg. 25mm thick and 25mm dia hard rubber oblique pvc rings shall be fixed to the bottom of all legs fixed with 30mm long screws. top of table shall be of 18 mm thick pre laminated mdf board with 4mm teak wood edging alround the top of table. finish all wood surfaces shall be melamyne polished with high gloss finish by spray machine. rest all as per drg, overall size shall be 1330 mm long comm 710mm high. the inner frame shall be of 50mmx20mm teak wood battens six in nos. the back and front of frame shall be covered with 6mm thick commercial ply. the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive. six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg. 5mm thick looking mirror of saint gobian comma modiguard oblique atul shall be provided as shown on drg with beading alround. mild steel key plate shall be provided at both top corners of the hat stand. all exposed surfaces shall be given high gloss melamyne polish with lacquer spray machine finish. rest all as per drgs, all as per drg comma the timber in all around shall be first class hard wood teak comma the cushions shall be made out of pu foam of min 40 density of approved make and covered with tapestery cloth of approved quality comma pattern and colour before incorporating in work. the frame shall be polished after prepration of surfaces with two or more coats of brown oblique walnut colour melamyne polish with spray machine as per the requirement to its glossy look rest all as shown on drg and as directed by engr in charge., the base pedestal assembly of chair computer shall be of dia 700mm and 1060mm high. the pedestal assembly shall be provided with injection molded in black 30 percentage glass filled nylon. a 10 point 5mm dia forged bright zinc plated ms castor pin is of press fitted into each prong for holding the castors. the seat and back of the chair computer shall be made of 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. the back form shall be designed with contour lumber support for extra comfort with pvc lipping allround. the back rest shall be adjustable and consist of drop lift mechanism and shall be adjusted in the insert. it shall be scratch and weather resistant. rest all as per sample and as approved by ge, overall size shall be 700mm long comma 300mm wide and 880mm high. the legs of the shoe rack shall be of 25mm dia ms pipe of 18 gauge. the five shelves of the rack shall be of 20mm dia ms pipe of 18 gauge welded to legs. the shelves shall have 3mm dia ms rod 9 nos in widthwise and 3 nos in lengthwise welded to 20mm dia shelf frame. pre treated with powder coated oven baked with black colour., the overall size of the table bed side shall be 450mm x 450mm x 600mm from rear and 450mm x 450mm x 500mm from front as shown in drg. the entire frame of table bed side shall be made up of 18mm ms square pipe 18 gauge duly black powder coated. the two sides and top shall be made up of 18mm thick mdf board exterior grade. the back of the table except the top portion as shown in drg shall be provided with 6mm commercial plywood bwr grade duly screwed to frame. the two sides comma back and bottom of drawers of the table shall be made up of 12mm thick mdf board irrespective of what is shown on drg comma except the front side which shall be of 18mm thick mdf board exterior grade. the drawers shall be made functional by using telescopic channel of appropriate size shall be used for smaooth mvement of drawer.the drawers of the tables shall be provided with 100mm long cp handles. rest all as per drg. the lower portion of the bed side table should be box type provided with one shutter of appropriate size duly fixed with piano type hinges comma one cp handle of 4 inch size and one magnetic catcher should also be provided. rest all as shown on drawing and as directed by engr in charge., overall size shall be of 1000mm long comma 380mm wide and 760mm high. bottom rest shall be made of 19mm thick mdf board and shall be 900mm long and 280mm wide and 75mm hih joined together in long and short sides. multipurpose bin linen shall be placed over it. the bin shall be 1000mm long comma 380mm wide and 385mm high. back side shall be of 19mm thick mdf board 1000mm long and 685mm high. sides shall be of 19mm thick mdf board 380mm wide and 685mm high. top and bottom shall be of 19mm thick mdf board 1000mm long and 380mm wide. a vertical partition shall be provided at 400mm from inner face of left hand side which shall be of 19mm thick mdf. a shelf shall be provided in the middle of left portion which shall be of 19mm thick mdf board and shall remain uncovered. two drawers and a cupboard shall be provided on the right hand side. of the bin. bottom comma sides comma back and front of drawers shall be of 12mm thick mdf board. the partition between the drawers shall be of 19mm thick mdf board. front shutter of cupboard shall be hinged with continuous piano type hing and shall be side hung. the shutter shall have eight vertical slots of 19mm width and 180mm high with gap of 19mm made in the center of the shutter. the shutter shall be provided with 100mm long mild steel powder coated handle and ball spring catch as shown on drawing. 19mm thick mdf board 543 mm long and 40mm wide shall be provided as base support in the front under the drawers. teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers. teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers on the outer sides in such a way that it rns smoothly over the beares fixed on the the sides of the partitions of the bin.
Agency / Dept :
indian army
Due Date :
Sep 07, 2026 (5 days left)
Tender Value :
23.73L
View Documents
T18 Ref No : 16952584
Location : sarsawa , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; replacement of a 40 50 mm size square bar rail on the cane unloader and giving a satisfactory trial; buyer , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; alignment of rail bars of the bridge of the cane unloader and replacement as per requirement and satisfactory trial; buyer , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; all the worn and damaged plates and angles fitted on the cane carrier should be cut and removed and the given 6 8 mm ms plate should be bent and fitted.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; replacement of worn corroded runners of the cane carrier src and irc with 8 x 65 mm or 10 x 65 mm flat iron and repair replacement of weak guidelines an.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; to fabricate and errect the cane carrier guide as per the given sample and give a satisfactory trial; buyer , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; replacing the worn outside plate of the chopper and leveler with new 6 8 mm plate and giving a satisfactory trial; buyer , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; replacing the worn out hood top plate of the chopper and leveler with new 8 10 mm plate and giving a satisfactory trial; buyer , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; replacing the worn out side plate of the fibrizer with new 10 12 mm plate and give satisfactory trial; buyer , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; to replace the reflector plate of the fibrizer and give a satisfactory trial; buyer , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; cutting and removing the weak and damaged side plate of src and irc and replacing it with the given new 08 10 mm plate and giving a leakproof satisfactor.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; cutting and removing the weak and damaged bottom plate of src and irc and replacing it with the given new 08 10 mm plate and giving a leakproof satisfact.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; to make and errect the guide of src and irc as per the given sample and give a satisfactory trial; buyer , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; to make runner boxes of src and irc and give satisfactory trials; buyer , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; to do the work of fitting the liner of the given ss plate at the bottom of src and irc and give a satisfactory trial; buyer , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; to fabricate boots using 8 10 mm ms plates provided by src and irc and to conduct a satisfactory trial; buyer , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; carry out strengthening work using the channels and angles provided by src and irc and conduct a satisfactory trial; buyer , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; to fabricate the weak sloppy plates of the donali suit fitted on milo from the given ms plate as per the drawing and give a satisfactory trial; buyer , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; removing the worn out trpf cover fitted on the mill and making and fitting a new cover using the plate given as per the drawing sample and giving a satis.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; to carry out the work of tipping the teeth of mill rollers and conduct a satisfactory trial; buyer , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; to carry out the work of chevron cutting as per requirement on mill rollers and give satisfactory trials; buyer , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; work involving the errectation of broken teeth on the mill s pressure chute repair of worn out teeth via hard facing and conducting a satisfactory tria.. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; dismantling the old pressure chute errected on the mill completely replacing the corroded section repairing and welding the damaged parts of the ss plate .. , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; fabricate the juice tank for the mill house using the provided 6 8 mm plate and conduct a satisfactory trial run; buyer , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; removing the bottom of the supply juice tank errecting a 12 mm plate in its place and conducting a satisfactory trial; buyer , repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; manufacturing the bed for the s r c and i r c
Agency / Dept :
uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Due Date :
Sep 04, 2026 (2 days left)
Tender Value :
5.62L
View Documents
T18 Ref No : 16813731
Location : ernakulam , kerala
Source : GEM Tenders
tender for repair/ refurbishing of 143 double story steel iron beds at under trainees mess
Agency / Dept :
indian coast guard ICG
Due Date :
Aug 27, 2026
Tender Value :
10.55L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16708111
Location : jammu , jammu & kashmir
Source : GEM Tenders
tender for taking down cement or cement lime plaster , taking down steel window or frames , taking down wooden shutter , material and labour for granite work , supply and fixing aluminium windows , supply and fixing factory made single extruded wpc , providing and fixing false ceiling , supply and fixing in repair decorative , material and labour rendering , rendering 10mm thick on fair faces , rendering 15mm thick cement plaster , supply only liquid water proofing , preparation of newly plastered surfaces , preparation of newly plastered surfaces two coats , complete removal of exisiting treatment , complete removal of wall and ceiling exisiting , supply and fixing in repair 5mm thick, add alt of aluminum window celling plaster and painting with connected items in gym, taking down cement or cement lime plaster any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc including cutting of trees shrubs or any type of vegitation upto and including roots complete including removal all debries exceeding 50m but not exceeding 100m all as specified and directed by engineer in charge., taking down steel window or frames without taking off shutter from frame area exc 1.50 sbut n exc 4 sqm quare metre each including cutting holes for taking out hold fasts or dismantling brick work holes cut and any other damage to jambs walls for taking out hold fast shall be finished identical to existing finish without any extra cost to govt complete all as specified and directed by engineer in charge., taking down wooden shutter of any dscription exc 1.00 square metre but n.exc 2.00 square metre each with all fittings complete all as specified and directed., material and labour for granite work 18 to 20mm thick table rubbed and polished in cooking platforms walls windows cill and gate up to 10 mtr height etc over 10mm thick screed bed in cement mortar 1 ratio 4 including pointing in white cement 1 ratio 2 using marble dust with admixture of pigment to match with old surfaces or shede complete all as per specified and as directed., supply and fixing aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 x 39 mm sideand top of size min 92.34 x 29.70 shutters vertical 39 x 20 mm shutter top and bottom of size min 20x39 mm shutter interlock min size 39x20 mm with rollers and conceled locking arrangements with 5 mm thick tinted glass with rubber gasket brush and aluminium beading aluminium grill with fixing arrangement wt. of grill not less then 2.50 kg sqm aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to is complete all as directed by engr in charge al. section thickness 1.50 mm, supply and fixing factory made single extruded wpc wood polymer composite solid plain flush door shutter of 35mm size comprising of virgin polymer of k value 58 to 60 suspension grade calcium carbonate and natural fibers wood powder rice husk wheat husk and non toxic additives maximum toxicity index of 12 for 100 ms having minimum density of 650 kg cum and screw withdrawal strength of 1800 n face and 900 n edge minimum compressive strength 50 n mm2 modulus of elasticity 850 n mm2 and resistance to spread of flame of class a category with property of being termite/borer proof water moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk s.s screws all as per direction of engineer in charge., providing and fixing false ceiling at all heights with grg glass fibre with reinforced gypsum false ceiling tiles semi perforated 12mm thick micro tegular edged grg false ceiling of size 595 x 595 mm of approved texture design and patterns having moisture less than 2 percent humidity resistance of 99percent nrc0.50 to 0.75 as per is 8225 ratio 1987 noncombustible as per bs tiles 4 76 part 4 1970 and light reflectance of 85percent minimum to be laid in true horizontal level suspended on inter locking metal t grid of hot dipped galvanized iron section of 0.33mm thick g, supply and fixing in repair decorative stainless steel tubular curtain rail of 25mm dia and one number of brackets on each end and one no of wall to wall funnal brakest globe valve all on each end which are required on ground of the rod per opening of doors windows make and materail approved by engineer in charge complete all as specified and directed., material and labour rendering 5mm thick on fair faces on concrete surfaces ceiling finished even and smooth without using extra cement on walls in cement mortar 1 ratio 3 complete all as specified and directed by engr in charge., rendering 10mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement on walls in cement mortar 1 ratio 6 complete all as specified and directed by engr in charge., rendering 15mm thick cement plaster in cement mortar 1 ratio 4 on fair face of brick work or concrete surface finished even and smooth without using extra cement with waterproffing compound admixture complete all as specified and as directed., supply only liquid water proofing admixture complete all as specified and directed by engineer in charge., preparation of newly plastered surfaces two coats of distempering with 1st quality acrylic distemper ready mixed having voc content less than 50gms litre of approved manufacturer of required shade and colour complete as per manufacturers specification over a complete all as specified and directed by engr in charge., preparation of newly plastered surfaces two coats overfinishing walls with acrylic smooth exterior paint of required shade two or more coat applied at the rate 1.67 ltr 10 sqm over and including priming coat of exterior primer applied at the rate 2.20 kg 10 sqm complete all as specifiedand directed by engg in charge., complete removal of exisiting treatment and applying two coats of distempering with 1st quality acrylic distemper ready mixed having voc content less than 50gms litre of approved manufacturer of required shade and colour complete as per manufacturers specification filling gaps by putty after washing rubbing down and stopping complete all as specified and directed by engr in charge., complete removal of wall and ceiling exisiting treatment and applying 1mm coat of plater of paris putty one cote of acrylic smooth exterior paint at the rate 835 ltr 10 sq of required shade over one coat of primer m complete all as specifiedand directed by engg in charge., supply and fixing in repair 5mm thick looking mirror of selected quality with and including stainless steel spacers with bevelled edging any size .complete all as spd and direcetd by engg in charge.
Agency / Dept :
indian army
Due Date :
Aug 24, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16760663
Location : kutch , gujarat
Source : GEM Tenders
tender for mta store cpvc pipes 40 mm outer dia sdr 11 make supreme finolex prince , cpvc pipes 25 mm outer dia sdr 11 make supreme finolex prince , cpvc t 40 mm outer dia sdr 11 make supreme finolex prince , cpvc socket 40 mm outer dia sdr 11 make supreme finolex prince , cpvc union 40 mm outer dia sdr 11 make supreme finolex prince , cpvc elbow 40 mm outer dia sdr 11 make supreme finolex prince , cpvc reducer socket 40x25 mm outer dia sdr 11 make supreme finolex prince , cpvc elbow 25 mm outer dia sdr 11 make supreme finolex prince , cpvc fta 25x20 mm , float volve 20mm , cpvc solution adhesive 100 ml , cpvc union 25 mm outer dia sdr 11 make supreme finolex prince , septic tank cleaning , wooden board with sunmica sheet cover of size 250x100mm , wooden board with sunmica sheet cover of size 180x100mm , 20 kva genr set repair exhaust fan , 15 kva genr set repair avr plate and panel board , glass glazing putti , thinner , paint brush 100mm , paint brush 50mm , tapping screw 50mm , white cement , cp grating with hole , pvc angle holder , 0.50mm th ppgl roofing sheet 12x3.50 feet length , square pipe 25 x 25mm 20 feet long , flat iron patti 75mm x 75mm , cement opc , sand coarse , 20mm stone aggregate , welding rod , magnet screw 25mm , synthetic enamel paint og , synthetic enamel paint black , synthetic enamel paint white , cutter blade 100mm , cp tap 15 mm , hdpe water tank 500 ltrs make sintex js polyplast polycon , hdpe water tank 1000 ltrs make sintex js polyplast polycon , pvc connection pipe 15mm dia 450mm long , waste pipe for urinal , exhasut fan 300 mm pvc body make philips crompton orient bajaj havells , exhasut fan 450 mm pvc body make philips crompton orient bajaj havells , led tube light 20w 4 feet havells bajaj surya , desert cooler 3000 cmf pvc body 55 ltr water storage cap make symphony vego bajaj , desert cooler water pump , 10 square mm 2 core aluminium cable , led bulb 8w havells bajaj surya , led bulb 12w havells bajaj surya , ceilling fan 1200mm sweep , ceiling fan capacitor , pvc copper cable insulated multi strands 2.5 sq mm make anchor havells finolex , pvc copper cable insulated multi strands 1.5 sq mm make anchor havells finolex , mcb spn 40 amps make philips crompton greaves havells , mcb sp 05 to 30 amps make philips crompton greaves havells , insulation tap , casing capping 25mm 10 feet make anchor havells finolex , switch socket combination 15 amps pin pvc box mounted complete make anchor havells finolex , switch socket combination 5 amps pin pvc box mounted make anchor havells finolex , change over switch 100 amp make havells lt siemens , mattress single bed 1905 x 914 x 50mm make kurlon , ms door size 1800 x 900mm , mesh door size 2025 x 975mm , bathroom pvc door 30mm thick 1850 x 712mm , pvc bathroom doors 30 mm thick of size 750 x 2000mm , septic tank cleaning , wiremesh cloth 0.56mm , aluminium tower bolt 150 mm length , aluminium bow handle 150 mm length , vitrified tiles 600x600 mm , magnet screw 50mm , magnet screw 75mm , looking mirror size 450x600mm , cp towel rail 450mm , ro motors repair 30hp and 40hp , spun cartridge 40x2 inch , 30 kva generator armature rewinding , 5 hp water pump repair water pully wheel air cleaner drive coupling , 35 sqmm 4 core armoured aluminium cable make polycab havells finolex kei, as per specfication
Agency / Dept :
indian army
Due Date :
Aug 24, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16640089
Location : jammu , jammu & kashmir
Source : GEM Tenders
tender for supply laying testing and commissioning ug cable xlpe , material and labour for cable jointing kit end joint , excavating in trenches in hard dense soft soil , removing excavated material to a distance , returing filling in including spreading , supply and laying of dwc double wall , material and labour for cutting through , supply and fixing gi tubing medium grade , material and labour for earthing complete , supply and fixing in replacement mccb , supply and fixing change over switchs , material and labour for three phase aluminum, repair and maintenance of aluminum cable and including connected items at charlie hill ops location, supply laying testing and commissioning ug cable xlpe insulated screened pvc bedded galvanized steel strip or wire armoured electric power cables heavy duty 1100 volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core including taking down old cable with suitable thimbles from trench complete. make polycab paragon gloster, material and labour for cable jointing kit end joint for 1.1 kv earthed grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core xlpe armoured aluminium conductor cable of size 70 sqmm to 95 sqmm., excavating in trenches in hard dense soft soil n exc 1.5 m wide and n exc 1.5 m in depth for foundation of poles trenches for laying of cable or for shafts wells cesspits manholes pier holes etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed., removing excavated material to a distance not exceeding 50 mtr and deposting where directed at a level not exc 1.5 mtr above the starting point, returing filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm each all as required and directed., supply and laying of dwc double wall corrugated hdpe pipe isi marked is 16205 part-ii of outer dia of 93 mm and inner dia 80 mm with smooth internal and profiled external surface for non pressure under ground cable including all connected accessories like coupler o ring etc for protection cable complete all as specified and as directed. make rex polyextrusion genimi, material and labour for cutting through existing road surfaces pcc pcc tiles etc and making trench rm of minimum 500mm wide 100cm in depth along the cross section of road for laying of pipes or ug cables including returning filing in well ramming and removal of surplus soil to a distance not exc. 50 mtrs and repairs to road surfaces to match with existing specification after laying the pipes cable etc. all as specified and directed, supply and fixing gi tubing medium grade tubes 80 mm bore including taking down old unsv one complete all as specified and directed., material and labour for earthing complete with galvanized steel earth plate electrode 60 x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below gl with top edge of the plate not less than 1.5 mtr below normal gl and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead galvanised iron 4mm dia wire by means of bolts nuts check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to db and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore gi light grade with funnel and wire mesh including all necessary excavation and earth work pcc chamber in cement concrete 1 ratio 3 ratio 6 type c2 and rcc cover and all as shown in electrical plate no 3 of mes schedule pt i of 2009., supply and fixing in replacement mccb tpn 100 amps 415 volts complete incl taking down old unserviceable make legrand havells l and t indoasian hpl, supply and fixing change over switchs on load 63 amps 4 pole including taking down old unsv one complete all as specified and directed., material and labour for three phase aluminum rectangle bus bar box 4 way of 150 amps rating complete all as specified and as directed
Agency / Dept :
indian army
Due Date :
Aug 19, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16640097
Location : jammu , jammu & kashmir
Source : GEM Tenders
tender for material and labour in replacement of crca sheet , material and labour in replacement of crca sheet out door , supply and fixing lt cable end terminatio , supply and fixing on wall pvc insulated , excavation in trenches not exceeding , returning filling in including spreading levelling , removing excavated material not exceeding , supply laying and testing in replcement of cable xlpe , supply laying and testing in replcement of cable xlpe insulated , supply laying and testing in replcement of cable xlpe insulated screened , supply and laying and fixing in replacement double wall , ditto all as per items no 11 but of size 77mm outer dia, repair of power supply for rice steam boiler and standby supply panel for chapatti, material and labour in replacement of crca sheet out door feeder box for aluminuam bus bar cap 300 amp 3 phase 4 wire 415 volts with porcelain insulator weather and vermin proof with ip 54 protection made out of 3.15 mm crca sheet duly painted with two coats of synthetic enameld paint over a red oxide primer type both side openable from front side and back having locking arrangement on both sides mounted over 50x50x6 mm angle iron stand at the bottom of height not less than 45 cm above ground level and not less than 30 cm in ground floor mounted duly grouted in pcc 1 ratio 3 ratio 6 type c1 factory made duly powder coated including taking out of old unservisable panel and mccb 200amp 25ka four pole x 01 nos as a incomer, material and labour in replacement of crca sheet out door feeder box for aluminuam bus bar cap 400 amp 3 phase 4 wire 415 volts with porcelain insulator weather and vermin proof with ip 54 protection, made out of 3.15 mm crca sheet duly painted with two coats of synthetic enameld paint over a red oxide primer type both side openable, from front side & back having, locking arrangement on both sides mounted over 50x50x6 mm angle iron stand at the bottom of height not less than 45 cm above ground level and not less than 30 cm in ground floor mounted duly grouted in pcc 1 ratio 3 ratio 6 type c1 factory made duly powder coated including taking out of old unservisable panel and mccb 250amp 25ka four pole x 01 nos as a incomer, supply and fixing lt cable end termination joining kit heat shrinkabale complete with jointing materials suitable for lt armoured cable 3.5 core of size 50 to 95 sqmm all as directed make 3m denson m-seal, supply and fixing on wall pvc insulated sheathed service wire twin core 10 sqmm aluminium multistranded conductor 1100 volts grade incl taking down old unserviceable one complete with fixing arrangement clip., excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in any type of soil for laying of lt ug cables complete., returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm thick in hard dense soil, removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, supply laying and testing in replcement of cable xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cable lt 1100 volt grade with stranded aluminium conductor of size 95 sqmm 3.5 core complete all as specified and directed., supply laying and testing in replcement of cable xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cable lt 1100 volt grade with stranded aluminium conductor of size 70 sqmm 3.5 core., supply laying and testing in replcement of cable xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cable lt 1100 volt grade with stranded aluminium conductor of size 16 sq mm 4 core., supply and laying and fixing in replacement double wall corrugated dwc pipes made of high density polythyline hdpe with all accessories i.e. all type of joints sockets elbows bends and end caps etc. all as specified and directed by engr in charge of size 50mm outer dia and 38mm inner dia, ditto all as per items no 11 but of size 77mm outer dia and 63mm inner dia
Agency / Dept :
indian army
Due Date :
Aug 19, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16211132
Location : muzaffarnagar , uttar pradesh
Source : GEM Tenders
corrigendum tender for erection and fabrication work a 1 , erection and fabrication work a 2 , erection and fabrication work a 3 , erection and fabrication work a 4 , erection and fabrication work a 5 , erection and fabrication work a 6 , erection and fabrication work a 7 , erection and fabrication work a 8 , erection and fabrication work a 9 , erection and fabrication work a 10 , erection and fabrication work a 11 , erection and fabrication work a 12 , erection and fabrication work a 13 , erection and fabrication work a 14 , erection and fabrication work a 15 , erection and fabrication work a 16 , erection and fabrication work a 17 , erection and fabrication work a 18 , erection and fabrication work a 19 , erection and fabrication work a 20 , erection and fabrication work a 21 , erection and fabrication work a 22 , erection and fabrication work a 23 , erection and fabrication work a 24 , erection and fabrication work a 25 , erection and fabrication work a 26 , erection and fabrication work a 27 , erection and fabrication work a 28 , erection and fabrication work a 29 , erection and fabrication work a 30 , erection and fabrication work a 31 , erection and fabrication work a 32 , erection and fabrication work a 33 , erection and fabrication work a 34 , erection and fabrication work a 35 , erection and fabrication work a 36 , erection and fabrication work a 37 , erection and fabrication work a 38 , erection and fabrication work a 39 , erection and fabrication work a 40 , erection and fabrication work a 41 , erection and fabrication work a 42 , erection and fabrication work a 43 , erection and fabrication work a 44 , erection and fabrication work a 45 , erection and fabrication work a 46 , erection and fabrication work a 47 , erection and fabrication work a 48 , erection and fabrication work a 49 , erection and fabrication work a 50 , erection and fabrication work a 51 , erection and fabrication work a 52 , erection and fabrication work a 53 , erection and fabrication work a 54 , erection and fabrication work a 55 , erection and fabrication work a 56 , erection and fabrication work a 57 , erection and fabrication work a 58 , erection and fabrication work a 59 , erection and fabrication work a 60 , erection and fabrication work a 61 , erection and fabrication work a 62 , erection and fabrication work a 63 , erection and fabrication work a 64 , erection and fabrication work a 65 , erection and fabrication work a 66, erection and fabrication work a, cut out and remove the weakened and worn-out portions of the discharge chute of the mill scraper. fabricate new sections using 12 mm thick plates, reinstall them, and provide perforated plates as per the scraper profile. weld and fix them securely, then conduct a satisfactory trial. remove the worn-out runner base of the cane carrier. fabricate a new runner base using a 100 mm channel box, installation it, and straighten, reverse, and reinstall the old channel. remove the worn 40/50 mm square bars of the cane unloader and replace them with new square bars of the same size. conduct a satisfactory trial. remove the worn runners of the cane carrier, rake carrier, bagasse elevator, and r.b.c. replace them by reversing the old runners or installing new runners as required. remove the worn or damaged side plates of the chains of the cane carrier, rake carrier, and r.b.c. replace them with repaired old plates or new plates. remove the worn side plates of the fibrizer hood. installation new plates, weld them from both inside and outside, and conduct a satisfactory trial. carry out complete overhauling, testing, and trial of the bagasse baling machine. perform the required repairs on the old racks of the s.r.c. and i.r.c. fabricate new racks for the bagasse elevator/r.b.c. chains as per the sample. fabricate and installation new top and bottom covers of the t.r.p.f. as per the existing design and conduct a satisfactory trial. remove the worn tail-end boots of the s.r.c./i.r.c. fabricate new boots from 8 mm/10 mm thick plates as per the sample, installation them, carry out leak-proof welding, and conduct a satisfactory trial. dismantle the grabs of the cane unloaders, repair all parts, perform hardfacing on the fingers as instructed, reassemble the grabs, and conduct a satisfactory trial. remove the damaged juice tray used for compound imbibition in the mills. fabricate and installation a new tray as per the sample and reconnect all fittings. remove the worn guides provided to prevent the chains of the cane carrier, s.r.c., i.r.c., and bagasse elevator from lifting. fabricate and installation new guides as instructed and conduct a satisfactory trial. repair the worn wheels of the bridge/trolley drive of the cane unloaders by welding as instructed. remove the damaged twin chutes of the t.r.p.f. fabricate new twin chutes matching the existing design and erect them in position. fabricate and fit m.s. rings on the idler wheels of the cane carrier. provide a 25 mm thick plate support between the mill headstock and the t.r.p.f. headstock as instructed. repair the old hammer shanks of the fibrizer by welding, hardfacing, and balancing. remove the damaged hoods of the cane chopper/leveller. fabricate and installation new folding-type hoods. replace the broken pocket plates of the pocket-type anvil plate of the fibrizer with new plates. straighten bent plates, weld them, and perform hardfacing as instructed. build up the worn hub surfaces of the cane leveller/chopper rotor assembly by welding, machine them flat, and perform hardfacing. remove the weakened motor and gearbox beds of the cane unloaders. fabricate modified new beds, installation them, align the motor and gearbox, and conduct a trial. strengthen the weakened columns of the cane carrier structure by welding reinforcing plates. fabricate and fit juice rings in the mill rollers as per the sample. carry out the required repairs to the pressure chutes between the t.r.p.f. and the mill. remove the damaged mill juice receiving tank. fabricate a new tank using 8 mm/10 mm thick plates, installation it, reconnect all connections, and conduct a leak-proof trial. remove the damaged bottom cone of the mill juice receiving tank. fabricate and installation a new cone as per the sample, reconnect all fittings, and conduct a leak-proof trial. remove the damaged 10"/12" pipes between the mill juice tray and the gutter. fabricate and installation new stainless steel pipes and conduct a leak-proof trial. provide 3 mm thick stainless steel lining in the bottom trough of the s.r.c./i.r.c. with leak-proof welding. remove the loose bed of boiler feed pump no. 1, fabricate and installation a new bed, reconnect all fittings, and conduct a trial. fabricate a leak-proof damper in the old i.d. fan ducting before the chimney so that there is no backflow of air when the new i.d. fan operates. remove the nipple reducers and damaged pipelines of all three wet scrubber pumps. installation new pipelines and carry out leak-proof welding. remove all nozzles inside the wet scrubber venturi, replace damaged nozzles with new ones, and reconnect all fittings. fabricate a new backwash pipeline from old boiler tubes between the service tank and wet scrubber. installation new valves, clamps, and complete all connections. remove the damaged juice tray below the t.r.p.f. leading to the mill juice tray. fabricate and installation a new tray. remove damaged ash chutes of the boilers. fabricate new chutes from old/new plates matching the original design and installation them. repair the damaged dampers of air heaters, economizers, and f.d./i.d. fan inlet, outlet, suction, and delivery ducts. fabricate new frames and fit new mesh/screens for the internal steam filters of the boiler drums. remove the damaged flue gas ducting between the i.d. fans and chimney. fabricate and installation new ducting from 5–6 mm thick plates and conduct a leak-proof trial. fabricate new impellers for the bagassilo fan as per the sample, repair the casing, and conduct a successful trial. remove the damaged suction cones of the i.d./f.d. fan casings. fabricate and installation new cones as per the sample and conduct a satisfactory trial. replace the damaged perforated baffle plates inside the boiler feed tank. remove and repair the damaged bagasse feeding chutes of boilers 1, 2, and 3. replace the damaged air headers supplying additional f.d. air to the furnaces of 20-ton boilers 1 and 2. replace the damaged ducting between the air heater and i.d. fan with new ducting made from 5–6 mm thick plates. replace damaged perforated screens used for bagasse filtration in the bagasse elevator. remove the economizer coils/tubes of 20-ton boilers 1 and 2, clean them internally and externally, conduct hydraulic testing, reinstall them, make them leak-proof, and carry out final hydraulic testing. remove damaged trough channels/plates of the s.r.c./i.r.c., fabricate replacements as instructed, and installation them. fabricate and installation angle iron strengthening rings on the boiler chimney. strengthen the damaged truss-type bridge structure of the cane unloader using new channels, angles, and plates. weld and restore the enlarged holes of the block-type chain links of the s.r.c./i.r.c., redrill pin holes, and grind the surfaces smooth. replace the worn rack attachment links of the s.r.c./i.r.c. chains with new 12 mm thick plate attachments, weld them, and drill holes as per the drawing. construct separate access platforms for all three cane unloaders using old angle channels. replace the damaged portions of the i.d. fan casing, air heater cell/ducting, and economizer cell. replace the old m.s. plates of the s.r.c./i.r.c. trough and boot, make them leak-proof, and provide 3 mm stainless steel lining. fabricate new racks for the s.r.c./i.r.c. chains from 25 mm thick plates, drill holes, and provide roller supports at both ends. remove the bent 250 mm channel of the cane unloader trolley, restore line and level, strengthen the structure, fit a new runner square bar, check diagonals, and align the wheels. dismantle all four wheels of the mill and powerhouse cranes, clean them, inspect bearings, grease all plumber blocks, replace damaged bearings from mill spares, repair worn wheels by welding, and conduct a satisfactory trial. repair the worn shells and teeth of the t.r.p.f. top and bottom rollers by hardfacing. fit rings on both sides to compensate for reduced shell length. remove the damaged mill juice tray and fabricate a new tray using 5 mm stainless steel plate as per the sample. conduct a leak-proof trial. repair the stainless steel juice tray of the mill. remove the mill headstock if cracked or misaligned, re-grout it, realign it, and complete all associated works. remove the shaft of the damaged t.r.p.f. roller and dismantle the shell using gas cutting. cut old 63.5 mm boiler tubes with bends, prepare 5.1-meter straight tubes for the air heater, and clean them by grinding.
Agency / Dept :
uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Due Date :
Jul 13, 2026
Tender Value :
16.57L
View Documents
T18 Ref No : 16257263
Location : muzaffarnagar , uttar pradesh
Source : GEM Tenders
corrigendum tender for erection and fabrication work b 1 , erection and fabrication work b 2 , erection and fabrication work b 3 , erection and fabrication work b 4 , erection and fabrication work b 5 , erection and fabrication work b 6 , erection and fabrication work b 7 , erection and fabrication work b 8 , erection and fabrication work b 9 , erection and fabrication work b 10 , erection and fabrication work b 11 , erection and fabrication work b 12 , erection and fabrication work b 13 , erection and fabrication work b 14 , erection and fabrication work b 15 , erection and fabrication work b 16 , erection and fabrication work b 17 , erection and fabrication work b 18 , erection and fabrication work b 19 , erection and fabrication work b 20 , erection and fabrication work b 21 , erection and fabrication work b 22 , erection and fabrication work b 23 , erection and fabrication work b 24 , erection and fabrication work b 25 , erection and fabrication work b 26 , erection and fabrication work b 27 , erection and fabrication work b 28 , erection and fabrication work b 29 , erection and fabrication work b 30 , erection and fabrication work b 31 , erection and fabrication work b 32 , erection and fabrication work b 33 , erection and fabrication work b 34 , erection and fabrication work b 35 , erection and fabrication work b 36 , erection and fabrication work b 37 , erection and fabrication work b 38 , erection and fabrication work b 39 , erection and fabrication work b 40 , erection and fabrication work b 41 , erection and fabrication work b 42 , erection and fabrication work b 43 , erection and fabrication work b 44 , erection and fabrication work b 45 , erection and fabrication work b 46 , erection and fabrication work b 47 , erection and fabrication work b 48 , erection and fabrication work b 49 , erection and fabrication work b 50 , erection and fabrication work b 51 , erection and fabrication work b 52 , erection and fabrication work b 53 , erection and fabrication work b 54, erection and fabrication work b, cut out and remove the damaged plate; fabricate and installation a new 10 mm plate in its place, and provide support by installing angle channels beneath the bottom. dismantle and lower the clarifier coil; clean it, replace corroded flanges/pipes, refit the coil, and drill holes according to specifications. cut out and remove the corroded mud scraper plate from the clarifier; fabricate and installation a new plate, fit the scraper, and conduct a trial run. dismantle the weak mud scraper pipes in the clarifier, installation new pipes, and mount the mud scraper assembly. installation an 800/900 mm diameter rubber-seated angle valve in the steam/vapour lines of the quad, semi-kestner, and vapour cell units as directed, and conduct a leak-proof trial. to completely re-tube the quad body, cut and lower the calandria's bottom saucer; after fitting the tubes and conducting a hydraulic test on the calandria, weld the bottom saucer (internally and externally) to ensure it is leak-proof, and perform water and vacuum trials. dismantle corroded or weak vapour/exhaust steam lines associated with the semi-kestner, vapour cell, quad bodies, and pans; fabricate new lines using 8.0/10.0 mm thick m.s. plate based on original specifications, erect the new lines, perform leak-proof welding, and conduct successful water and steam trials. cut out and remove corroded/weak juice distributors or down-take pipes in the quad bodies and installation newly fabricated replacements. cut out and remove corroded/weak manholes from pans, doors, sulphur furnaces, quad bodies, cells, and bottom saucers, and installation newly fabricated manholes based on original specifications. dismantle and remove corroded/weak umbrellas from the semi-kestner, vapour cell, quad bodies, and pans; fabricate new umbrellas according to original specifications and erect them with necessary supports. for the vapour pipes of pans and quads, provide external reinforcement using m.s. -material of 900 to 1100 mm diameter... fabricate and installation t-rings made of plate or angle iron; cut out and remove corroded or weak ammonia gas headers from the quad bodies; fabricate and erect new headers; installation nipples, valves, flanges, etc., and conduct a leak-proof trial; remove weak shells from the semi-kestner, vapour cell, and quad bodies; fabricate new ones to specifications, erect them in place, and conduct a leak-proof trial; dismantle the weak vapour pipe located between the evaporator quad bodies; fabricate and installation a new vapour pipe (600, 700, or 800 mm diameter) using new or existing plate; perform leak-proof welding and conduct a water trial; cut out and remove leaky or weak external catchers from the evaporator and pan vapour pipes; fabricate new catchers (including internals) based on samples, fit them in place, perform leak-proof welding, and conduct successful water-filling/vacuum trials; remove the top plate of the external catcher on the evaporator and pan vapour pipes to carry out necessary repairs on weak internals, cones, or shells; reinstall the top plate, perform leak-proof welding, and conduct successful water-filling/vacuum trials; cut out and remove the corroded or weak agitator of the 10" x 20" vacuum filter; fabricate a new one based on the old design, fit it in place, and conduct a successful trial; cut out and remove the corroded or weak agitator of the 8" x 16" vacuum filter; fabricate a new one based on the old design, fit it in place, and conduct a successful trial; cut out and remove the corroded or weak mud tray of the vacuum filter; fabricate a new mud tray using new or existing plate and fit it in place; replace the corroded or weak side plate of the vacuum filter and conduct a satisfactory water trial; cut out and remove the corroded or weak agitator section of the 10" x 20" vacuum filter and carry out necessary repairs based on the old design; cut out and remove the weak tapered cone of the 40-ton capacity pan. fabricate and installation a replacement using a new 12/16 mm plate, following the sample; restore all connections to their original state, ensure leak-proof welding, and conduct successful water-filling and vacuum trials. cut out and remove corroded or weak agitator sections of the 8-inch x 16-inch vacuum filter and carry out necessary repairs as per the original specifications. dismantle the bagasse silo cyclone at the vacuum filter station, replace corroded sections, perform necessary repairs, reinstall it in its original position, and restore all connections. cut out and remove the corroded or weak shell of the mud mixer; fabricate a new shell (using new or existing plate material), installation it in place, and conduct a successful trial. cut out and remove corroded or weak mud discharge chutes located at the discharge end of the mud conveyor belts; fabricate and installation replacements using existing plate material and conduct a trial. dismantle and remove corroded or weak condenser bottles from the vacuum filters; fabricate and installation new ones based on the sample and conduct a successful vacuum trial. in the boiling house, remove the foundation bolts/beds of corroded or weak pumps and construct new channel-based beds; installation new foundation bolts into the pits prepared by the civil team to create these new channel beds; mount the pump and motor, complete the necessary connections and alignment, and conduct a satisfactory trial. installation supports made from old m.s. pipes for the so2 gas lines.
Agency / Dept :
uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Due Date :
Jul 17, 2026
Tender Value :
17.39L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16213419
Location : jammu , jammu & kashmir
Source : GEM Tenders
corrigendum tender for material and labour in replacement for acsr , supply and erect steel tubular swaged poles , supply and fixing in replacement of stay assembly , material and labour in replacement cross arms , material and labour for restrainging acsr conductor , prunning of trees of over head , supply and fixing in replacement loop type , supply and fixing in replacement of pin type , excavation in trenches in soft , removal of surplus spoil to a distance , material and labour for pcc , material and labour , cable end termination jointing kit , material and labour for testing , supply testing and laying xlpe , supply and fixing of cable jointing kit for 33 kv, repair and replacement of standby power supply to mrs alongwith connected items, material and labour in replacement for acsr conductor any size drawn straight horizontal on over head lines on existing poles including binding with insulators weight of conductor shall be measured straight horizontal distance between centre of two adjacent ht lt poles and calculating weight of conductor of size length by adding 3percent extra for sag jointing jumpers etc complete all as specified and directed., supply and erect steel tubular swaged poles complete with cast iron base plate, final taper plug, bolts nuts and screws as specified type 410 sp 55 11 mtr long erecting in position all as specified, supply and fixing in replacement of stay assembly comprising of 7 oblique 2.50mm galvanized ms stay wire of reqd length, fixed to poles with and including of fi clamps made out of fi 40x6mm and nuts bolts washers of suitable size ms stay bow 14mm dia galvanized 40cm long ms galvanised stay rod threaded with nut 16mm dia 21 cm long with washers ms stay plate galvanized 230x30x6mm incl necessary excavation and pcc, material and labour in replacement cross arms bracings supports clamps and back plates fabricated from structural steel sections including nut bolts washers welding bending cold and hot drilling holes for bolts in any shape or size as indicate or directed and inclusive of one primer coat one under coat and one finishing coat of paint., material and labour for restrainging acsr conductor 33kv ht line providing suitable proper sag all as specified and directed., prunning of trees of over head 33kv ht lines by taking proper shutdown & removing the same from site upto a distance of 50 mtr all as directed by engr in charge., supply and fixing in replacement loop type porcelain white, brown or green large size with cover dimensions of 90mmx140mm clearance of whole 25.5 mm as specified, supply and fixing in replacement of pin type porcelain white brown or green insulator including one galvanized mild steel spindle two galvanised iron washers and one galvanised nut 50mm height 65mm dia for working pressure 33000 volts grade.all as specified and, excavation in trenches in soft oblique loose soil not exceeding 1.50 m wide and not exceeding 1.50 m in depth for foundation of poles stay cable pipes etc and getting out complete all as specified., removal of surplus spoil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified., material and labour for pcc 1 ratio 4 ratio 8 type d2 using 40mm graded broken stone aggregate as in mass concrete in foundation of poles complete all as soecified., material and labour for pcc 1 ratio 3 ratio 6 type d2 using 20mm graded broken stone aggregate as in mass concrete in foundation of stays complete all as soecified., cable end termination jointing kit for 33 kv earthed grade cable outdoor type heat shrink type joint complete with jointing material and accessories suitable for single core xlpe sqmm and entire satisfaction of engnr-in-charge complete all as specifiedand directed, material and labour for testing of faulty ht cable 33kv by using ht voltage fault locating machine and finding the fault and to be repaired the same including all t and p as required on site complete all as directed., supply testing and laying xlpe insulated, screened pvc bedded galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor 33000 volts earthed grade of size 300 sqmm single core complete, supply and fixing of cable jointing kit for 33 kv earthed grade cable for straight through joint heat shrink type joint complete with jointing material and accessories suitable for single core xlpe armoured al conductor cable of size 300 sq mm and entire satisfaction of
Agency / Dept :
indian army
Due Date :
Jul 23, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Iron Bed Repair. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Iron Bed Repair sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Iron Bed Repair Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Iron Bed Repair, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Iron Bed Repair Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Iron Bed Repair Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Iron Bed Repair.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Iron Bed Repair depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Iron Bed Repair Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Iron Bed Repair bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Iron Bed Repair. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Iron Bed Repair, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Iron Bed Repair, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Iron Bed Repair?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Iron Bed Repair tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Iron Bed Repair?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Iron Bed Repair, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Iron Bed Repair is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All